LG | KT-T651 | Owner's Manual | LG KT-T651 Owner’s Manual

LG KT-T651 Owner’s Manual
OWNER’S MANUAL
Multi-touch
Overlay Kit
Please read this manual carefully before operating the your set and retain it
for future reference.
KT-T650
KT-T651
KT-T751
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
ASSEMBLY AND PREPARATION..3
-- Common Accessories.............................................. 3
-- Model-Specific Accessories................................... 4
-- Safety Precautions.................................................... 6
-- Assembly Instructions............................................ 8
HOW TO ATTACH THE IR............17
INSTALLATION INSTRUCTIONS....
18
-- Connecting Touch USB Cable.............................18
BEFORE USE................................20
-- Monitor Settings.....................................................20
TOUCH SPECIFICATIONS...........21
OS SUPPORT AVAILABILITY......22
PRODUCT SPECIFICATIONS......23
TROUBLESHOOTING GUIDE.....26
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects
or other reproductive harm. Wash hands after handling.
ASSEMBLY AND PREPARATION
Common Accessories
Check your product box for the following items. If there are any missing accessories, contact the local dealer
where you purchased your product. The illustrations in this manual may differ from the actual product and
accessories.
CD (Owner’s Manual/
LG Touch Screen SW)/Cards
Stylus (2 EA)
Pen Tray (1 EA)
ENGLISH
Assembly And Preparation
3
4
ASSEMBLY AND PREPARATION
ENGLISH
Model-Specific Accessories
Check your product box for the following items. If there are any missing accessories, contact the local dealer
where you purchased your product. The illustrations in this manual may differ from the actual product and
accessories.
KT-T650
M4 x L6 screws
(2 EA)
M3 x L6 screws
(14 EA)
Side Bracket (2 EA)
Bottom
Bracket
(1 EA)
Side
Bracekt
Dimension : 300 x 47 x
Top Bracket (1 EA)
ASSEMBLY AND PREPARATION
5
KT-T651
ENGLISH
M4 x L6 screws
(2 EA)
M3 x L6 screws
(14 EA)
Top Bracket (1 EA)
M3 x L8 screws (1 EA)
Side Bracket (2 EA)
IR Bracket (1 EA)
Bottom Bracket (1 EA)
KT-T751
M4 x L6 screws
(20 EA)
Top Bracket (2 EA)
M3 x L8 screws
(1 EA)
IR Bracket (1 EA)
Side Bracket (2 EA)
Bottom Bracket (2 EA)
6
ASSEMBLY AND PREPARATION
ENGLISH
CAUTION
•• Always use genuine components to ensure safety and product performance.
•• The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
•• The accessories provided with your product may vary depending on the model or region.
•• Product specifications or contents in this manual may be changed without prior notice due to upgrade of
product functions.
Safety Precautions
- If you are a professional installer, please read this manual carefully before installing the product.
- If you are a professional installer, please give this manual to the user after installation and ensure that the user
also reads the manual carefully and retains it for future reference.
- After reading the manual, please keep it handy for future reference.
WARNING
yyThe product should be installed by a qualified professional specified by the retail store.
- Product installation by non-qualified personnel is very dangerous and may cause personal injury.
yyWhen moving or replacing the product after installation, contact a qualified installer specified by the
retail store.
- Installation or movement of the product must be carried out by a skilled professional. If an unqualified
person moves or installs the product, it may cause safety risks.
yyDo not hang the power cable and signal cable on the back of the monitor when mounting the monitor
to the wall.
- Damaged cables may result in fire, electric shock, or damage to the product.
- Keep the monitor upright when mounting the monitor to the wall.
yyThe product should be installed where its weight can be fully supported.
- If the product is installed on a weak surface, the product may fall, causing injury.
- Check the maximum allowed weight of the wall mount (total weight is 75 kg).
yyDo not hang on this product. Protect it from severe impact after installation.
- The product may fall and cause injury.
yyModels attached to the Multi-touch Overlay Kit cannot be installed on stands.
- The product may fall.
ASSEMBLY AND PREPARATION
When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing the screen).
NOTE
•• The pen tray can only be used in the landscape position.
•• Applicable models for portrait installation : KT-T651, KT-T751
ENGLISH
Portrait Layout
7
8
ASSEMBLY AND PREPARATION
ENGLISH
Assembly Instructions
- The picture may differ from the actual product.
NOTE
yyBefore installing the product, if there are any water drops or foreign materials on the inner/outer side of
the glass, wipe them out with a soft cloth.
yyWhile using the product, if there are any water drops or foreign materials on the inner/outer side of the
glass, wipe them out with a soft cloth and install it again.
yyAssemble the product in a clean, uncontaminated area to prevent dust or foreign material from entering
it.
1 Place a soft cloth on the table and place the Multi-touch Overlay Kit over it as illustrated.
2 Remove the internal protective film using the handle at the upper right corner of the glass as illustrated.
ASSEMBLY AND PREPARATION
ENGLISH
3 Place the display product on the Multi-touch Overlay Kit as illustrated.
NOTE
yyFor the KT-T751 model, place the display inside the guides as shown in the image.
Display product
9
Guide
10
ASSEMBLY AND PREPARATION
ENGLISH
4 Use the screws and the top bracket provided to make the product stationary.
KT-T650
KT-T751
KT-T651
ASSEMBLY AND PREPARATION
KT-T650
KT-T651
ENGLISH
5 Use the screws to attach the product to the bottom bracket provided.
11
12
ASSEMBLY AND PREPARATION
ENGLISH
KT-T751
ASSEMBLY AND PREPARATION
KT-T650
KT-T651
ENGLISH
6 Use the screws to attach the product to the side brackets provided.
13
14
ASSEMBLY AND PREPARATION
ENGLISH
KT-T751
ASSEMBLY AND PREPARATION
KT-T650
KT-T651
ENGLISH
7 Use the screws to attach the product to the pen tray assembly.
15
16
ASSEMBLY AND PREPARATION
ENGLISH
KT-T751
8 Remove the external protective film using the handle at the upper right corner of the glass as illustrated.
HOW TO ATTACH THE IR
- Only applies to 65SM5B, 65SM5C, 65SM5KB, 65SM5KC, 75UM3C, 75UH5C models.
- The image may differ depending upon the model.
1 Remove the IR sensor from the set.
2 Attach the IR sensor to the IR bracket.
3 Attach the IR sensor and the IR bracket to the set.
ENGLISH
How to attach the IR
17
18
INSTALLATION INSTRUCTIONS
ENGLISH
Installation Instructions
Connecting Touch USB Cable
Connect the touch USB cable extending from the side of the product to the PC.
Side of product
PC
CAUTION
yyThe product may not work if you use a USB extension cable.
INSTALLATION INSTRUCTIONS
19
Back of the Product
CAUTION
yyIt may not be supported depending on the model.
yyThe image may be different according to the model.
yyIf there is a change in installation environment (lights etc.), please remove and reconnect the TOUCH
USB cable.
ENGLISH
Connect the TOUCH USB cable on the side of the product to the USB port on the back of the monitor.
20
BEFORE USE
ENGLISH
Before Use
Monitor Settings
1
Press SETTINGS to access the main menu.
2
Press the navigation buttons to scroll to PICTURE and press OK.
3
Press the navigation buttons to scroll to the setting or option you want and press OK. To return to the
previous level, press BACK.
4
Set the video mode of the monitor to game mode.
5
When you are finished, press EXIT. When you return to the previous menu, press BACK.
TOUCH SPECIFICATIONS
Touch panel size
Multi-touch
Supported Operating Systems
Touch input method
Touch accuracy
KT-T650 / KT-T651
163.8 cm
KT-T751
189.2 cm
10 points
Windows 7, Windows 8, Windows 8.1, Windows 10, Android,
Linux, Mac OS X
Pens, fingers, gloves, etc.
1 mm
KT-T650
Touch response time
Operating voltage
Power consumption
13 ms (1 point) < Time < 30 ms (10 points)
4.65 V
to 5.25 V
2.5 W (Typ.)
Rated Voltage
5V
0.6 A
KT-T651
Touch response time
Operating voltage
Power consumption
10 ms (1 point) < Time < 30 ms (10 points)
4.65 V
to 5.25 V
1.8 W (Typ.)
Rated Voltage
5V
0.6 A
KT-T751
“
Touch response time
Operating voltage
Power consumption
10 ms (1 point) < Time < 30 ms (10 points)
4.65 V
to 5.25 V
1.8 W (Typ.)
Rated Voltage
5V
” refers to alternating current (AC), and “
0.6 A
” refers to direct current (DC).
ENGLISH
Touch Specifications
21
22
OS SUPPORT AVAILABILITY
ENGLISH
OS Support Availability
Mouse
Digitizer
Gestures
Plug and Play
Windows 10
O
O
O
O
Windows 8
O
O
O
O
Windows 7 &
Embedded P
O
O
O
O
Mac OS X
O(1)
Linux(2)
O
Android(2)
O
Functions
Click, Drag, DoubleClick
* Windows 7 Service Pack must be installed.
O(1)
O(1)
O(1)
O
O
(Kernel 3.9 or higher) (Kernel 3.9 or higher)
O
O
O
(Kernel 3.9 or higher) (Kernel 3.9 or higher)
Mouse & Digitizer
Mouse Functions,
Functions, Press &
Right-Click, Flicks,
Tap, Rotate, Zoom
Panning with Inertia
In/Out
O
yyWindows 2000 and earlier versions of Windows are not supported.
yyOperating systems other than Windows 10, Windows 8, Windows 8.1 and Windows 7P may not support
multi-touch functionality.
(1)
yy Driver installation is required. The Mac drivers can be found on the provided CD.
(2)
yy For Android or Linux-powered equipment (set-top boxes etc.), the touch feature may not work
if the Touch Driver is not activated in the operating system.
PRODUCT SPECIFICATIONS
23
ENGLISH
Product Specifications
Product Dimensions
The illustrations in this manual may differ from the actual product and accessories.
The product specifications below may be changed without prior notice due to upgrade of product functions.
KT-T650
(Unit: mm)
1340
62.5
1485.5
23.5
27
300
27
27
27
23.5
300
Dimensions (width x height x depth) (mm)
1485.5 x 859.5 x 62.5
Weight (kg)
15.5
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 85 %
24
PRODUCT SPECIFICATIONS
The illustrations in this manual may differ from the actual product and accessories.
The product specifications below may be changed without prior notice due to upgrade of product functions.
KT-T651
(Unit: mm)
1340
1485.5
23.5
27
62.1
27
300
ENGLISH
Product Dimensions
27
27
23.5
300
Dimensions (width x height x depth) (mm)
1485.5 x 859.5 x 62.1
Weight (kg)
15.3
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 85 %
PRODUCT SPECIFICATIONS
25
ENGLISH
Product Dimensions
The illustrations in this manual may differ from the actual product and accessories.
The product specifications below may be changed without prior notice due to upgrade of product functions.
KT-T751
(Unit : mm)
1500
1715
32
993.5
1050.7
32
47.9
32
32
78.1
138.6
499.83
1250
Dimensions (width x height x depth) (mm)
1715 x 1050.7 x 138.6
Weight (kg)
22.7
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 85 %
26
TROUBLESHOOTING GUIDE
ENGLISH
Troubleshooting Guide
Touch does not work at all.
Problem
Touch does not work at all.
The touch location does not match
the touch coordinates.
When using multiple monitors,
touching is applied to a monitor other
than the one intended.
10 point multi-touch is not working.
Action
yyCheck the USB cable connection. - This may occur when the USB
cable between PC and monitor is not connected. Check the USB
cable and reconnect it.
yyCheck your PC's power. - This may occur when the PC is powered
off. Make sure that your PC's power cord is firmly plugged into a
power outlet, then restart your PC.
yyRestart your PC. - Touch may not respond when the system is
down due to an unstable network.
yyCheck the signal cable connection. - If your PC and monitor are
not connected with a signal cable, touch will not work. Check the
signal cable connection.
yyUse the calibration function included in Windows to make any
corrections.
yySet the product as the default monitor.
yyEnsure that your OS supports multi-touch functionality.
yyMake sure your content supports 10 point multi-touch.- The
software used (e.g., Flash Player, Paint, etc.) may not support 10
point multi-touch. yyRestart the software (e.g. Flash Player, Paint, etc.). yyRestart your PC.
yyIf the gap between two touch points is 25 mm or less, touch
errors may occur.
yy10 point multi-touch support may be unstable on the edge of the
touch screen.
yyUsing the 10 point multi-touch screen to draw lines may cause
partial breakage of the lines.
The model and serial numbers of the SET are
located on the back or one side of the SET.
Record it below should you ever need service.
WARNING -This is a class A product. In a domestic
environment this product may cause radio
interference, in which case the user may be
required to take adequate measures.
MODEL
Applicable models
(For details about applicable models, contact the
retail store or refer to the Owner’s manual.)
SERIAL
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising