LG | RT-20LA30 | LG RT-20LA30 Owner’s Manual

LCD
Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0310M
(MF002A,
061M TX,
3840VA0014E)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Side panel
4
Basic operation
On and off / Programme selection
7
Volume
adjustment
/ Quick view
Mute function / Auto Demonstration
On screen language selection (option)
On
8
screen menus
Menu selection
TV stations
Auto programme tuning
Manual programme tuning
9
Setting up
Fine
Tuning
Programme edit
Calling the programme
table
Picture adjustment
Picture adjustment
14
Sound
15
adjustment
adjustment
Stereo/Dual reception
Sound
Sound
reception
Other functions
TV and AV modes
Child lock / Auto sleep
Blue back (option) / Sleep timer
17
Teletext (option)
Switch on / off
SIMPLE text
TOP text (option)
FASTEXT mode
Special teletext functions
19
Connection of external equipment
Aerial socket
Component in sockets
Audio/Video in sockets
Monitor out sockets
S-video/Audio in sockets (S-AV)
Headphone socket
12V DC out socket
22
Troubleshooting
2
/ NICAM
output selection
check list
Back
cover
Installation
Power
This set
operates
DC
on a
supply provided by
the AC-DC
adaptor,
a
the voltage is as indicated on the label on the back cover. Use only
the AC-DC adaptor supplied with the set and never apply an AC
PR
VOL
OKMENU
mains to the set
directly. The AC-DC adaptor operates on an AC
mains supply, the voltage is as indicated on the label of the AC-DC
adaptor.
a. Open the back panel cover.
b. Connect the DC plug of the AC-DC adaptor to the 15V socket of
TVAV
ON OF
the set.
c.
d.
e.
Connect the AC-DC
adaptor and it's power cord.
Connect the power cord to an AC mains.
Close the back panel cover.
In the event of thunderstorms
mains
plug
anything to
powercuts, please pull
or
out the
PR
VOL
of the AC-DC adaptor and the aerial plug. Do not allow
rest upon or roll over the power cord, and do not place
the monitor where the power cord is
subject
to
OKMENU
TV AV
ON
OFF
damage.
c
d
Warning
b
To prevent fire or shock hazard, do not expose the set to rain or
moisture. Do not rub or strike the Active Matrix LCD with anything
hard
as
this may
scratch, mark,
or
damage
the Active Matrix LCD
permanently.
Service
Never
remove
the back
cover
of the set
high voltage and other hazards. If
ly, unplug it and call your dealer.
as
this
can
the set does not
expose you to
operate proper-
Aerial
Connect the aerial cable to the socket marked +75 Ω
For the best
reception
an
on
the back.
outdoor aerial should be used.
Location
2
13
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary
vibration, moisture, dust
set is
in
or
heat. Also
position to allow a free flow
the ventilation openings on the back cover.
The standing angle can be adjusted as shown
placed
a
ensure
that the
of air. Do not
in
cover
pictures.
Cleaning
the set before cleaning the face of the LCD Screen. Dust
by wiping the screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
Unplug
the set
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
adjusted
with the buttons
on
the side
of the set.
Remote control handset
POWER
MUTE
1
1
2
3
Before you use the remote control
teries. See the next page.
1.
POWER
switches the set
2
4
5
6
7
8
9
2.
MENU
0
from
standby
or
off to
standby
or
directly
standby.
NUMBER BUTTONS
switches the set
3.
on
from
select
a
number.
MENU
selects
4.
VOL
Φ / Γ (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
5
TEXT
MIX
(Programme Up/Down)
a programme or a menu item.
switches the set on from standby.
LIST
PR
Δ / Ε
selects
VOL
OK
Q.VIEW
a menu.
SLEEP
PR
OK
INDEX
i
TIME
on
TV/AV
3
4
handset, please install the bat-
accepts your selection
REVEAL MODE
or
displays
the current mode.
M
SIZE
HOLD
UPDATE
5.
Q.VIEW
returns to the
I/II
previously
viewed programme.
PSM
6
6.
I/II
selects the
7
language during dual language
output (option).
selects the sound
7.
PSM
(Picture Status Memory)
preferred picture setting.
recalls your
4
broadcast.
Location and function of controls
8.
MUTE
switches the sound
9.
off.
on or
TV/AV
selects TV
clears the
or
AV monitor mode.
menu
switches the set
from the
on
from
screen.
standby.
POWER
MUTE
10. SLEEP
sets the
8
sleep
timer.
11. LIST
displays
the programme table.
12. TELETEXT BUTTONS
These buttons
For further
Note
:
are
details,
In teletext
(option)
used for teletext.
see
1
2
3
4
5
6
7
8
TV/AV
0
the 'Teletext' section.
mode, the SLEEP, LIST and Q.VIEW buttons
9
10
are
SLEEP
PR
used for teletext function.
VOL
Battery
9
MENU
Q.VIEW
installation
VOL
OK
LIST
PR
11
The remote control handset is
two AAA
batteries.
powered by
type
batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
To load the
TEXT
MIX
INDEX
i
TIME
M
-
SIZE
HOLD
I/II
Note
:
To avoid
damage
from
batteries if you do not plan to
extended
period
possible battery leakage,
use
remove
12
REVEAL MODE
UPDATE
PSM
the
the remote control handset for
an
of time.
5
Location and function of controls
RF/RT-20LA30 series
Side
panel
PR
6
VOL
5
9
10
OK
432
MENUTV/A
7
H/P
8
S-VIDEO
VIDEO MONO
L
AUDIO
R
AV
ON/ F
1.
MAIN POWER
(ON/OFF)
switches the set
on or
7.
off.
1
Back
panel
POWER/STANDBY INDICATOR
illuminates
brightly
(r)
when the set is in
standby
mode.
2.
TV/AV
dims when the set is switched
selects TV
clears the
or
menu
switches the set
3.
from the
on
from
screen.
8.
REMOTE CONTROL SENSOR
9.
HEADPHONE SOCKET
standby.
MENU
Connect the
selects
headphone plug
to this socket.
a menu.
10. AUDIO/VIDEO IN SOCKETS
4.
on.
AV monitor mode.
OK
(AV)
Connect the audio/video out sockets of exter-
accepts your selection
or
displays
the current
mode.
nal
equipment
to these sockets.
S-VIDEO/AUDIO IN SOCKETS
5.
Φ / Γ
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
Connect the video out socket of
(SAV)
an
Connects the audio out sockets of the SVIDEO VCR to the audio sockets
6.
Δ / Ε
(Programme Up/Down)
selects
a programme or a menu item.
switches the set on from standby.
6
S-VIDEO
VCR to the S-VIDEO socket.
as
in AV.
Basic
operation
On and off
1.
2.
3.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε, TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to
4.
standby
mode.
Press the main power button to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You
a
can
select
programme number with the Δ / Ε
or
NUMBER
POWER
MUTE
1
2
3
4
5
6
7
8
buttons.
Volume
MENU
adjustment
Press the Φ / Γ button to
9
TV/AV
0
adjust
the volume.
PR
Quick view
VOL
Press the Q.VIEW button to view the last programme you
OK
were
watching.
Q.VIEW
VOL
PR
Mute function
Press the MUTE button. The sound is switched off and the
display
W appears.
You
can
cancel it
by pressing
the
MUTE,
Φ /
Γ, I/II button.
Auto Demonstration
I/II
To review all the menus programmed in the set, press the OK button of the side panel control for about 5 seconds. To stop auto
demonstration, press any button of the side panel control and
POWER button of the remote control.
On
screen
The
menu
language
can
First select your
be
selection
displayed
language.
on
the
(option)
screen
in desired
language.
1.
Press the MENU button to select the Station
2.
Press the Δ / Ε button to select Language.
Press the OK button.
Press the Δ / Ε button to select your desired language.
3.
4.
menu.
5.
Press the OK button.
6.
All the on screen displays will appear in the selected language.
Press the TV/AV button to return to normal TV viewing.
7
On
The
screen menus
on screen menu
ming
and
steps
are
takes you step by
The buttons
setting stages.
also displayed.
step through the programrequired for the operating
Menu selection
press the MENU button to display each menu.
Press the Δ / Ε button to select a menu item.
The selected menu item changes from white to red.
3.
Press the Φ / Γ button to change the setting of a menu item or
OK button to display the sub menu.
Note :
a.
In the AV mode, the Station menu is not displayed.
b. In the teletext mode, menus are not displayed.
c.
In some models, the Normal/Turbo search will not display,
the Start will display in the Auto programme menu.
d.
On some models, the Blue back will not display in the Special
1.
Repeatedly
2.
menu.
e.
On
some
models, the Language will
not
display.
MENU
BG
1
System
StorageOfrom
AutoOprogramme
ManualOprogramme
NormalOsearch
TurboOsearch
ProgrammeOedit
Language
PR
()OOKOMENUOTV
VOL
OK
()O}{OMENUOTV
AV
AV
VOL
Station
menu
PR
Contrast
100
95
85
80
Brightness
Colour
Sharpness
()O}{OOKOMENUOTV
AVO
Picture
System
Channel
V
BG
UHFO1
Fine
{{{
Search
Name
Storage
CO01
1
()O}{OOKOMENUOTV
AV
menu
0OOOOARDOOOOOOOO5OOARD1
1OOZDF
OOOO6 OOZDF1
OEqualizer
OBalance
OAVL
0
Off
2OOC12OOOOOOO7 OOC12
3OOS 4OOOOOOO8 OOS 44
4OOCH_5OOOOO9 OOCH_5
O
OODeleteO O
Copy
OOMoveO OOOOSkip
()OOKOMENUOTV
AV
()O}{OOKOMENUOTV
Sound
menu
TV
Off
Off
Off
Input
ChildOlock
AutoOsleep
BlueOback
AV
FlatOOOO
Music
Movie
Speech
User
OOOOOOOO0.1O0.5O1.5O5.0O10OkHzO
()O}{OMENUOTV
AV
Special
TV programme
8
()OMENUOTV
menu
AV
Setting up
TV stations
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use
the Δ / Ε or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
tuning
()OOKOMENUOTV
AV
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this
set.
1.
2.
3.
press the MENU button to select the Station menu.
Press the Δ / Ε button to select Auto programme.
Press the OK button to display the Auto programme menu.
Repeatedly
BG
1
System
StorageOfrom
NormalOsearch
TurboOsearch
1
2
3
4
5
6
7
8
MENU
()O}{OOMENUOTV
4.
5.
6.
7.
In
some
models, you
can
9
TV/AV
0
Press the Δ / Ε button to select System. Select a TV system
with the Φ / Γ button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the Δ / Ε button to select Storage from.
Select the beginning programme number with the Φ / Γ button
or NUMBER buttons. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Normal or Turbo search.
Option:
8.
AV
only
PR
VOL
OK
VOL
PR
select Start.
Note :
a.
Turbo search is further faster than Normal search and
in some models, these searches will automatically store all
receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
Press the OK button to begin auto programming.
System
StorageOfrom
NormalOsearch
TurboOsearch
1
BG
1
CO15
2%
MENUO
(Normal search)
System
StorageOfrom
BG
1
NormalOsearch
TurboOsearch
CO38
1
2%
MENU
(Turbo search)
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
Press the TV/AV button to return to normal TV
viewing.
9
Setting up
Station
Menu
TV stations
Manual programme
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
()OOKOMENUOTV
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
AV
1.
2.
3.
press the MENU button to select the Station menu.
Press the Δ / Ε button to select Manual programme.
Press the OK button to display the Manual programme
Repeatedly
menu.
System
Channel
1
2
3
4
5
6
7
8
9
4.
0
PR
5.
OK
BG
UHFO1
{{{
Search
Name
MENU
VOL
V
Fine
VOL
PR
6.
Storage
CO01
1
()O}{OOKOMENUOTV
AV
Press the Δ / Ε button to select
with the Φ / Γ button;
System.
Select
a
TV
system
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the Δ / Ε button to select Channel. Press the Φ / Γ
button to select V/UHF or Cable as required.
If possible, select the channel number (1 to 69) directly with the
number buttons. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Search. Press the Φ / Γ button to commence searching. If a station is found the search will
stop.
7.
If this station is the
one required, press the Δ / Ε button to select
Select the desired programme number (0 to 99) with
the Φ / Γ button or NUMBER buttons. Any number under 10 is
Storage.
entered with
8.
a numeric '0' in front of it, i.e. '05' for 5.
Press the OK button to store it. The display Stored will appear.
System
Channel
Fine
Search
Name
Storage
V
BG
UHFO1
{{{
CO01
1
Stored
9.
10
To store another
station, repeat steps
4 to 8.
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
3.
Select the next
5.
your choice of the second character, and
Repeat the 'Manual programme tuning'
position by pressing
the OK button and then take
Fine
fine
tuning
is
only
necessary if
AV
viewing.
reception
the 'Manual programme tuning'
Press the Δ / Ε button to select Fine.
Repeat
Language
()OOKOMENUOTV
7 to 8.
tuning
Normally
AutoOprogramme
ManualOprogramme
ProgrammeOedit
so on.
steps
Press the TV/AV button to return to normal TV
1.
Station
Menu
1 to 3.
Press the Δ / Ε button to select Name.
Press the Γ button. You can use a blank, +, -, the numeric 0 to 9
and the alphabet A to Z.
With the Φ button you can select in the opposite direction.
4.
2.
TV stations
steps
is poor.
1 to 3.
1
2
3
4
5
6
7
8
MENU
9
TV/AV
0
System
Channel
V
Fine
BG
UHFO1
PR
{{{
Search
Name
Storage
CO01
1
()O}{OOKOMENUOTV
AV
VOL
OK
VOL
PR
3.
Press the Φ / Γ
button to fine tune for the best
picture
and
sound.
4.
5.
the 'Manual programme tuning' steps 7 to 8.
Press the TV/AV button to return to normal TV viewing.
Repeat
The
finely tuned programme
during programme selection.
will be indicated
a
yellow
number
11
TV stations
Setting up
Station
Menu
Programme
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
()OOKOMENUOTV
AV
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
press the MENU button to select the Station menu.
Press the Δ / Ε button to select Programme edit.
Press the OK button to display the Programme edit menu.
Repeatedly
0OOOOARDOOOOOOOO5OOARD1
1 OOZDF
OOO6 OOZDF1
2OOC12OOOOOOO7 OOC 12
3OOS
4OOOOOOO8 OOS 44
4OOCH_5OOOOO9 OOCH_5
1
2
3
4
5
6
7
8
9
OODeleteO O Copy
OOMoveO OOOOSkip
()O}{OOKOMENUOTV
MENU
TV/AV
Deleting
1.
2.
0
a
programme
programme to be deleted with the Δ / Ε or Φ / Γ button.
Press the RED button twice.
The selected programme is deleted, all the following proSelect
a
grammes
Copying
PR
1.
VOL
OK
VOL
2.
AV
a
Select
are
shifted up
one
position.
programme
Φ / Γ button.
programme to be copied with the Δ / Ε
Press the GREEN button.
or
All the
one
a
following
programmes
shifted down
are
position.
PR
Moving
1.
2.
3.
a
programme
Select
a programme to be moved with the Δ / Ε
Press the YELLOW button.
or
Φ / Γ button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
again
to release this function.
0OOOOARDOOOOOOOO5OOARD1
1 OOZDF
OOO6 OOZDF1
2OOC12OOOOOOO7 OOC 12
3OOS
4OOOOOOO8 OOS 44
4OOCH_5OOOOO9 OOCH_5
OOMoveOoffO
()O}{OOMENUOTV
AV
1.
a programme number
Select a programme number to be
button.
2.
Press the BLUE button. The
3.
Press the BLUE button
Skipping
skipped
with the Δ / Ε
skipped programme turns to
again to release the skipped
Φ / Γ
blue.
programme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV button to return to normal TV
12
or
viewing.
Setting up
TV stations
the programme table
Calling
You can check the programmes stored in the memory
the programme table.
Displaying programme table
Press the LIST button to display
the
by displaying
Programme table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
0OOOOARDOOOOOOOO5OOARD1
1OOZDF
OOOO6 OOZDF1
2OOC12OOOOOOO7 OOC 12
3OOS
4OOOOOOO8 OOS 44
4OOCH_5OOOOO9 OOCH_5
OO
()O}{OOKOMENUOTV
Note
AV
:
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
programme in the programme table
programme with the Δ / Ε or Φ / Γ button.
Selecting
Select
a
a
Then press the OK button.
The set switches to the chosen programme number.
Paging through
There
are
a
TV/AV
PR
VOL
OK
PR
VOL
LIST
programme table
10 programme table pages in which contain 100 pro-
grammes.
Pressing the Δ / Ε
or
Φ / Γ button
repeatedly
Press the TV/AV button to return to normal TV
turns the pages.
viewing.
13
Picture
Picture
Menu
Picture
Contrast
100
95
85
80
Brightness
Colour
Sharpness
()O}{OOKOMENUOTV
AV
You
can
ness
1.
2.
3.
adjustment
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
press the MENU button to select the Picture menu.
Press the Δ / Ε button to select the desired picture item.
Press the Φ / Γ button to make appropriate adjustments.
Repeatedly
Contrast
Brightness
Colour
Sharpness
4.
Press the OK button to store it for the
The
MENU
100
95
85
80
display Stored
picture User.
appears.
TV/AV
Press the TV/AV button to return to normal TV
PR
appears. The
VOL
VOL
OK
PR
PSM
14
viewing.
To recall your preferred setting, press the PSM button until the
desired picture (Dynamic, Standard, Mild, Game or User)
picture Dynamic, Standard, Mild and Game are
programmed for good picture reproduction at the factory and cannot be changed.
Sound
Sound
You
adjustment
Sound
Menu
adjustment
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of the equalizer, balance. If you switch AVL to on, the set automatically keeps
on an equal volume level even if you change programmes.
can
Speech
1.
2.
3.
press the MENU button to select the Sound menu.
Press the Δ / Ε button to select the desired sound item; Equalizer,
Balance or AVL.
Press the Φ / Γ button to make desired adjustment.
Press the OK button in Equalizer to set the Equalizer User.
Repeatedly
OEqualizer
OBalance
OAVL
0
Off
O
()OOKOMENUOTV
AV
FlatOOOO
Music
Movie
Speech
User
OOOOOOOO0.1O0.5O1.5O5.0O10OkHzO
()OMENUOTV
AV
Press the Δ / Ε button to select your
preferred setting
;
Flat,
Music, Movie, Speech or User.
To set the Equalizer User,
Select User by pressing the Δ / Ε button.
b. Select a sound band by pressing the Φ / Γ button.
c. Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
The display Stored appears.
a.
Press the TV/AV button to return to normal TV
The sound
optimum
Flat, Music, Movie and Speech
sound
reproduction
at the
factory
viewing.
are
programmed for
changed.
and cannot be
15
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
for dual language broadcast
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
Language selection
If
a
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception
If your set is equipped with a receiver for NICAM reception, the high
quality NICAM (Near Instantaneous Companding Audio Multiplex)
digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
I/II
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
16
:
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
Other functions
TV and AV modes
Special
Menu
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
press the MENU button to select the Special
Press the Δ / Ε button to select Input.
Press the Φ / Γ button to select TV, DVD, AV or SAV.
Repeatedly
TV
Off
Off
Off
Input
ChildOlock
AutoOsleep
BlueOback
()O}{OMENUOTV
AV
menu.
The AV mode and external equipments are :
DVD : COMPONENT connected to the DVD/DTV IN sockets of
the set
AV
SAV
:
:
VCR connected to the AV sockets of the set
S-VIDEO VCR connected to the S-VIDEO sockets of the set
To return to TV
mode, press the
Δ / Ε
or
NUMBER buttons.
1
2
3
4
5
6
7
8
MENU
Alternatively you can select the
the TV/AV button.
TV, DVD
or
AV mode
by pressing
9
TV/AV
0
PR
Child lock
VOL
The TV
can
be set
so
control it. This feature
can
be used to
prevent unauthorized viewing.
3.
press the MENU button to select the Special menu.
Press the Δ / Ε button to select Child lock.
Press the Φ / Γ button on the remote control handset to select On.
4.
Press the TV/AV button to return to normal TV
1.
2.
VOL
that the remote control handset is needed to
PR
Repeatedly
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note
:
The
any button
display Child lock on will
the front panel is pressed
on
not appear
while
on
the
displaying
screen
the
if
menus.
17
Other functions
Special
Auto
Menu
TV
Off
Off
Off
Input
ChildOlock
AutoOsleep
BlueOback
()O}{OMENUOTV
AV
sleep
If you select Auto sleep On the set will automatically switch itself
to standby mode approximately ten minutes after a TV station stops
broadcasting.
1.
2.
3.
4.
press the MENU button to select the Special
Press the Δ / Ε button to select Auto sleep.
Press the Φ / Γ button to select On.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
Blue back
menu.
(option)
If you select Blue back On, the blue background appears
when there is no or poor signal.
on
the
screen
3.
press the MENU button to select the
Press the Δ/Ε button to select Blue back.
Press the Φ / Γ button to select On or Off.
4.
Press the TV/AV button to return to normal TV
1.
2.
MENU
TV/AV
PR
VOL
SLEEP
VOL
PR
Repeatedly
Sleep
Special
menu.
viewing.
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
preset time elapses.
Press the SLEEP button to select the number of minutes. The dis-
0 will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
Note
a.
b.
c.
:
To view the
remaining sleep time, press the SLEEP button once.
sleep time, repeatedly press the SLEEP button
until the display
0 appears.
When you switch the set off, the set releases the preset sleep
To cancel the
time.
18
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
a
set
free service broadcast by most TV stations which gives
information on news, weather, television pro-
up-to-the-minute
grammes, share
prices
and many other
topics.
The teletext decoder of this TV
FASTEXT
can support the SIMPLE, TOP and
systems. SIMPLE (standard teletext) consists of a num-
ber of pages which are selected by directly entering the correpage number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
sponding
1
2
3
4
5
6
7
8
Switch on/off
Press the TEXT button to switch to teletext. The initial page
page appears on the screen.
or
last
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selec-
9
TV/AV
0
tion, while the second shows the
Press the TEXT
or
current page displayed.
TV/AV button to switch off teletext. The
previous
mode reappears.
PR
OK
SIMPLE text
PR
Page selection
1.
2.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button
lowing
can
be used to select the
preceding
or
fol-
TEXT
MODE
M
page.
a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT
M
button to switch to LIST mode.
Programming
mode, press the
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
2.
Using
3.
4.
coloured button.
the NUMBER buttons, select the page you wish to pro-
a
gramme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
19
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with auto3.
4.
matic overflow to the next block.
With the green button you can
proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
The red button permits to return to previous selection.
Alternatively the Ε button can be used.
1
2
3
4
5
6
Direct page selection
9
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
7
8
TOP mode.
0
FASTEXT
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
Page selection
1.
2.
INDEX
i
3.
4.
Press the
i
button to select the index page.
select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
You
can
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the preceding or fol-
lowing
20
page.
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays the
teletext
TV
picture on
page. The display
of the
corner
screen.
the
screen
while
waiting
for the
1
2
3
4
5
6
7
8
9
new
will appear at the top left hand
is available then
When the
0
updated page
will change to the page number.
Press this button to view the updated teletext page.
display
PR
HOLD
Stops
the automatic page
text page consists of 2
change
which will
occur
if
a
telePR
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
or more
stop symbol is displayed
at the
top left-hand
corner
MIX
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
TIME
REVEAL
SIZE
HOLD
UPDATE
MIX
Displays
the teletext pages superimposed on the TV
picture off press this button again.
picture.
To switch the TV
TIME
When
viewing
a
the time at the
button
again
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
again
RED/GREEN,
Δ
/ Ε
or
to exit this function.
21
Connection of external
You
can
connect additional
etc. to your set.
Examples
equipment
such
equipment,
are
as
VCRs, camcorders
shown below.
Aerial socket
L
O MONO
AUDIO
R
L
VIDEO
AV
AUDIO
R
DC OUT
ANT IN
L L 75Ω
12V/0.2A
MONITOR OUT
VCR
1.
Connect the RF out socket of the VCR to the aerial socket
the back of the set.
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel on a desired programme number
the 'Manual programme tuning' section.
4.
Select the programme number where the VCR channel
stored.
Press the PLAY button on the VCR.
5.
Component
1.
or
Y B-Y
R-Y)
PB
PR
L
COMPONENT(480/480p)
H/P
R
S-VIDEO
VDEO(MONO)
L
AUDO
R
VIDEO
AV
(Y
PB
PR)
(480i/480p)
to the
of DVD/DTV IN.
2.
Connect the audio cable from the COMPONENT to the AUDIO
sockets of DVD/DTV IN.
3.
Press the TV/AV button to select DVD.
L
AUDIO
DVD/DTVIN
is
output sockets (Y Cb Cr, Y
of the COMPONENT
COMPONENT sockets
Y
using
in sockets
Connect the COMPONENT video
Pb Pr
on
MONITOR O
4.
Press the PLAY button
The COMPONENT
COMPONENT
o n
the COMPONENT.
playback picture
appears
on
the
screen.
(DVD/DTV)
Audio/Video in sockets
1.
Connect the audio/video out sockets of the VCR to AV sockets
of the set
2.
3.
Press the TV/AV button to select AV.
Press the PLAY button
The VCR
S-VIDEO
VIDEO MONO
L
AUDIO
R
L
VIDEO
AV
AUDO
R
ANT IN
LL 75Ω
on
playback picture
the VCR.
appears
on
the
screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L (MONO) socket of the set.
DC OUT
12V/0.2A
MONITOR OUT
Monitor out sockets
VCR
Connect the audio/video in sockets of the other TV
MONITOR OUT sockets of the set.
R
H/P
S-VIDEO
VIDEO MONO
L
AUDO
R
VIDEO
L
AUDIO
DIO
AV2
MONITOR OUT
TV
22
R
ANT IN
DC OUT
L L 75Ω
12V/0.2A
or
monitor to
Connection of external
S-Video/Audio in sockets
When
1.
(SAV)
an S-VIDEO VCR to the S-VIDEO
be further improved.
connecting
picture quality will
equipment
socket, the
S-VIDEO
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
3.
sockets of AV.
Select SAV by
4.
Press the PLAY button
The VCR
Insert the
You
the TV/AV button
on
AUDIO
R
VIDEO
L
AUDO
R
ANT IN
DC OUT
LL 75Ω
12V/0.2A
MONITOR OUT
repeatedly.
the VCR.
appears
on
the
screen.
socket
headphone plug
into the
headphone
socket of the set.
listen to the sound through the headphones and TV's
speaker. To adjust the headphone volume, press the Φ / Γ button.
If you press the MUTE button, the sound from the headphone and
TV's
L
AV2
S-VIDEO VCR
pressing
playback picture
Headphone
VIDEO MONO
can
speaker
are
Y
PB
PR
L
H/P
R
S-VIDEO
VDEO MONO
L
AUDIO
R
VIDEO
L
AUDIO
R
AUDIO
COMPONENT(480i/480p)
DVD/DTVIN
AV
MONITOR OUT
switched off.
12V DC out socket
Connect the DC
plug
the DC OUT socket
of the wireless AV receiver
on
the back
panel
of the set.
(optional parts)
to
O
VIDEO MONO
AV
L
AUDO
R
VIDEO
L
AUDIO
R
ANT IN
L L 75Ω
DC OUT
12V/0.2A
MONITOR OUT
23
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
Download PDF