LG | RT-21FB23VT | LG RT-21FB23VT Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
information to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0375M
(MC019A,
090A/D TX,
cover
require
and quote this
service.
3840VA0014E)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
TV Swivel function (option)
On screen language selection (option)
7
On
8
screen menus
Menu selection
TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning / Programme edit
Favorite programme
Calling the programme table
9
Setting up
Picture adjustment
PSM (Picture Status Memory)
Picture adjustment / Eye (option)
Turbo picture selection (option)
14
Sound adjustment (option)
SSM (Sound Status Memory)
Balance adjustment
Turbo sound selection (option)
Sound output selection
Stereo/Dual reception (option)
NICAM reception (option)
16
Other functions
TV and AV modes
Auto AV switching (option)
Child lock / Auto sleep / Blue back (option)
AVL (Auto Volume Leveler) (option)
CSM (Colour Status Memory) / Sleep timer
19
Game (option)
Block & Balloon (option)
Cricket & Car racing (option)
21
Timer (option)
Off timer / On timer
22
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
23
Connection of external
Aerial socket
26
equipment
Audio-L/R(or Audio)/Video in/out
Euro scart socket (option)
Component in sockets (option)
Headphone socket (option)
Troubleshooting
2
check list
sockets
(option)
Back
cover
Installation
Power
This set
ed
on
operates
the label
on
on an
AC mains
the back
In the event of thunderstorms
ial and mains
supply, the voltage is as indicatapply DC power to the set.
powercuts, please pull out the aer-
cover.
or
Never
plugs.
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
placed
the ventilation
or
heat. Also
position to allow a free flow
openings on the back cover.
a
ensure
that the
of air. Do not
cover
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions can also be
panel of the set.
adjusted
with the buttons
on
the front
Remote control handset
Before you use the remote control
teries. See the next page.
POWER
1.
MUTE
10
1
POWER
switches the set
handset, please install the bat-
from
standby
or
off to
NUMBER BUTTONS
switches the set on from
standby
or
directly
on
standby.
123
2.
456
select
a
number.
2
3.
789
MENU/INDEX
0
TV/AV
3
12
EYE/
PR
VOL
an
index page in the teletext mode
5.
VOL
()
SIZE/
HOLD/
X
TIME/
REVEAL/
(option)
programmes
OK
?
accepts your selection
SSM/
SLEEP/
or
displays
the current mode.
M
8
PICTURE
off.
on or
automatically.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
7
9
SOUND
TURBO/
/
14
15
6.
Q.VIEW
returns to the
16
selects
7.
a
TELETEXT BUTTONS
For further
8.
previously
PSM
viewed programme.
favorite programme.
These buttons
are
details,
(option)
used for teletext.
see
the 'Teletext' section.
(Picture Status Memory)
preferred picture setting.
recalls your
9.
TURBO PICTURE / SOUND BUTTON
selects Turbo
(With TELETEXT)
4
TELETEXT
Φ / Γ
13
PSM
(only
() /
() (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
scans
LIST
6
TEXT/MIX/
EYE/*
switches the eye function
()
OK
PR
4.
I/II/
Q.VIEW
UPDATE/
a menu.
selects
TV
4
5
(or INDEX)
models).
11
i
MENU
selects
picture
and sound.
(option)
Location and function of controls
10. MUTE
switches the sound
off.
on or
11. TV/AV
selects TV or AV mode.
clears the menu from the
switches the set
12. I/II/*
on
from
screen.
standby.
(option)
language during
selects the
selects the sound
dual
language
broadcast.
(option)
output.
POWER
13. LIST
displays
sets the
15. SSM/*
sleep
timer.
(option) (Sound Status Memory)
preferred sound setting.
16. SURROUND
3
4
5
6
7
8
9
MENU
0
TV/AV
3
(º/*) (option)
5
models)
or
:
12
EYE/
No function
COLOURED BUTTONS
11
4
selects surround sound.
TELETEXT
2
2
recalls your
:
10
1
the programme table.
14. SLEEP
*
MUTE
1
These buttons
are
used for teletext
VOL
(only
PR
VOL
OK
PR
programme edit.
I/II/
()
()
Q.VIEW
LIST
13
6
Battery
PSM
installation
SSM/
SLEEP
8
/
The remote control handset is
two AAA
batteries.
powered by
type
batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
PICTURE
To load the
14
15
16
SOUND
TURBO/
9
-
Note
:
To avoid
damage
from
batteries if you do not plan to
extended period of time.
possible battery leakage,
use
remove
the
the remote control handset for
an
(Without TELETEXT)
5
Location and function of controls
VIDEO
MENU
OK
VOL
ON/OFF
PR
MENU
VOL
OK
PR
ON/OFF
9
LAUDIO
1
R
2
345
910
123
4
5
11
10
AV
TV/AV
(VOL)
()
PR
VIDEO
()
L
AUDIO R
ON/OFF
AV
VIDEO
L
AUDIO
R
TV/AV
ON/OFF
AV
VL
PR
VIDEO
9
12367 8
1
AV
L
10967823
910
11
11
AUDIO
R
TV/AV
10
ON/OFF
VOL
AV
MENU
VOL
OK
PR
PR
ON/OFF
678
123
VIDEO
9
1
45
23
11
11
L
AUDIO
VOL
SOUND
OK
PR
PICTURE
TURBO
5
4
MENU
DIGITAL
ITTRSOUD
TURBO SOUND
ON/OFF
R
10
MENU
OK
VOL
123
PR
4
12
5
11
AV
VIDEO
AV
ON/OFF
10
MENU
OK
VOL
PR
L/MONO AUDIO R
VIDEO AUDIO
ON/OFF
AV3
R
9
132
AUDIO
1234
L
1.
MAIN POWER (ON/OFF)
switches the set on or off.
2.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
standby mode.
dims when the set is switched on.
blinks when signal is input from the
remote control.
VIDEO
8.
3.
REMOTE CONTROL SENSOR
4.
MENU
selects
5.
OK
a menu.
accepts your selection
current mode.
Φ / Γ (Volume
or
displays
the
Up/Down)
adjusts the volume.
adjusts menu settings.
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
6.
TV/AV
selects TV or AV mode.
clears the menu from the screen.
switches the set on from standby.
7.
(Function)
selects volume, EYE (option), picture items
or brief auto programme while the menus
not
6
display.
5
9
10
9
10
+/-
(Δ/Ε)
adjusts the
function or selects a programme.
switches the set on from standby.
9.
AUDIO
L/R (or AUDIO) / VIDEO IN
SOCKETS (AV) (option)
Connect the audio/video out sockets of
external equipment to these sockets.
Note :If both the input jacks on the
front/side panel and back panel have
been connected to external equipments
simultaneously, only the input jacks on
the front/side panel can be received.
-
10. HEADPHONE SOCKET
Connect the headphone
socket.
(option)
plug to this
11. EYE
(option)
adjusts picture according
rounding conditions.
to the
sur-
12. TURBO SOUND / PICTURE (option)
switches Turbo sound or Turbo picture
function on or off.
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε, TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme selection
You can select
buttons.
Volume
a
POWER
programme number with the Δ /
Ε
or
adjustment
Press the Φ / Γ button to
adjust
MUTE
NUMBER
1
2
3
4
5
6
7
8
9
MENU
0
TV/AV
the volume.
Quick view
Press the Q.VIEW button to view the last programme you
were
watching.
Note
:
This function works
only
when Favorite programme is
set to Off. Otherwise each press of this button will select a stored
PR
favorite programme.
VOL
Mute function
Press the MUTE button. The sound is switched off and the
appears.
You can cancel it by pressing the
º/* or TURBO SOUND button.
MUTE,
Φ
/
display
Γ, SSM/*, I/II/*,
I/II/
()
VOL
OK
PR
()
Q.VIEW
Auto Demonstration
To review all the menus programmed in the set, press the OK or
button of the front panel control for about 5 seconds. To stop auto
demonstration, press any button of the front panel control and
POWER button of the remote control.
SSM/
SOUND
TURBO/
TV Swivel function
/
(option)
In some models, you can manually turn TV set at left or right direction by 15 or 20 degrees, so that the watching degree is suitable for
your
position.
Note : Swivel panel is fixed in the hole at the swivel panel on the
back of the set by small bar(Swivel fixer). To operate this function,
pull it out.
On
screen
language selection (option)
The menu can be displayed
First select your language.
on
the
screen
in desired
language.
1.
2.
3.
Press the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select Language.
Press the Γ button and then Δ / Ε button to select your desired
4.
All the on screen displays will appear in the selected language.
Press the OK or Φ button to select the station menu.
Press the TV/AV button to return to normal TV viewing.
language.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
press the MENU button to display each menu.
Press the Γ button and then Δ / Ε button to select a menu item.
Press the Γ button to display the sub menu or the pull-down
1.
2.
3.
Repeatedly
menu.
4.
Change
the
setting
of
an
item in the sub
or
Φ/ΓorΔ/Ε.
pull-down
menu
with
pressing the OK or Φ
by pressing the Γ but-
You can move to the higher level menu by
button and to move to the lower level menu
ton.
Note :
a.
In the AV mode, the Station menu is not displayed.
b. In the teletext mode, menus are not displayed.
c.
In mono models, the Sound menu does not appear.
d.
In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
e.
In some models, the Language or Booster will not display.
MENU
CH.
PR
VOL
AutoOprogramme
ManualOprogramme
{
System
StorageOfrom
{
OBG
{
{
OOI
ProgrammeOedit
FavoriteOprogramme
{
NormalOsearch
{
ODK
{
TurboOsearch
{
OOM
Language
{
OO9
()
()O{OOKOMENUOTV
VOL
OK
AV
Station
PR
()O}{OOKOMENUOTV
AV
menu
()
CH.
PSM
{
PR.
{
User
{
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
()O{OOKOMENUOTV
Picture
CH.
AV
{
()O}{OOKOMENUOTV
AV
menu
SSM
{
00O-O-O-O-O-
Balance
{
01O CO 0O
3OO06O SO 1O
7
O05O SO 6O
9
02O CO 1O
2OO07O SO 2O
2
03O SO 6O
6OO08O CO 0O
9
04O SO 6O
7OO09O CO 1O1
DeleteOOOCopy
MoveOOOOOSkip
()O{OOKOMENUOTV
Sound
CH.
AV
menu
Input
{
ChildOlock
{
AutoOsleep
{
{
BlueOback
AVL
CSM
Game
{
{
{
Timer
{
()O{OOKOMENUOTV
Special
TV programme
8
()O}{OOKOMENUOTV
AV
menu
AV
Setting up
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the Δ / Ε
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
some
models up to 200 TV stations
Auto programme
can
CH.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavoriteOprogramme
{
Language
{
Station
Menu
{
{
be stored.
()O{OOKOMENUOTV
tuning
AV
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
press the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select Auto pro-
Repeatedly
gramme.
3.
Press the Γ button to
display
{
OBG
{
OOI
NormalOsearch
{
ODK
TurboOsearch
{
OOM
()O}{O OKOMENUOTV
4.
5.
6.
7.
8.
9.
the Auto programme
System
StorageOfrom
menu.
AV
Press the Γ button. Select a TV system with the Δ / Ε button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or Φ button.
Press the Δ / Ε button to select Storage from.
Press the Γ button. Select the beginning programme number
with the Φ / Γ button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the Δ / Ε button to select Normal or Turbo search.
Option:
In
some
models, you
can
only
1
2
3
4
5
6
7
8
9
MENU
0
TV/AV
PR
VOL
()
VOL
OK
PR
()
select Start.
Note :
a.
Turbo search is further faster than Normal search and in
some models, these searches will automatically store all receivable stations.
b.
If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
10. Press the Γ button to begin auto programming.
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
{
OOCO01O(BG)
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
77O7O7O736%
77O7O7O736%
MENU
MENU
(Normal search)
{
OOCO01O(BG)
(Turbo search)
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Press the TV/AV button to return to normal TV
viewing.
9
Setting up
Station
Menu
CH.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavoriteOprogramme
{
Language
{
()O{OOKOMENUOTV
{
{
TV stations
Auto programme scan
To automatically scan the pictures of stored programmes, press the
() or
() button for about 3 seconds. The picture of stored programmes appears on the screen one by one.
To stop auto programme
buttons.
scanning,
Manual programme
tuning
press any button
except VCR
AV
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1
2
3
1.
2.
4
5
6
3.
7
MENU
8
press the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select Manual
Repeatedly
programme.
Press the Γ button to
9
0
TV/AV
display the
Manual programme
PR.
{
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
()O}{OOKOMENUOTV
PR
VOL
VOL
OK
PR
4.
5.
()
()
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
{
AV
Press the Δ / Ε button to select PR..
Press the Γ button to select the programme number. Select the
desired programme number (0 to 99) with the Φ / Γ button or
NUMBER buttons on the PR. pull-down menu. Any number
under 10 is entered with a numeric '0' (or '00') in front of it, i.e.
'05' (or '005') for 5.
Press the OK button.
Press the Δ / Ε button to select System.
Press the Γ button,Select a TV system with the Δ / Ε button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or Φ button.
Press the Δ / Ε button to select Channel.
Press the Γ button. Press the Δ / Ε button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or Φ button.
Press the Δ / Ε button to select Search.
Press the Γ button. Press the Φ / Γ button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
PR.
{
System
{
Channel
{
Fine
Search
{
{
Name
{
Booster
{
{{{{
Stored
16. To store another
station, repeat steps
4 to 15.
17. Press the TV/AV button to return to normal TV
10
menu.
OO9
viewing.
TV stations
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
3.
4.
Press the Δ / Ε button to select Name.
Press the Γ button on the Name pull-down
Press the Δ button. You
and the alphabet A to Z.
can use a
blank,
AutoOprogramme
ManualOprogramme
{
1 to 3.
ProgrammeOedit
FavoriteOprogramme
{
menu.
Language
{
CH.
{
+, -, the numeric 0 to 9
5.
With the Ε button you can select in the opposite direction.
Select the next position by pressing the Φ / Γ button and then
take your choice of the second character, and so on.
6.
Press the OK button.
7.
Press the TV/AV button to return to normal TV
Booster
Station
Menu
{
()O{OOKOMENUOTV
AV
viewing.
(option)
When the interference between programmes appear, select Booster
1
2
3
4
5
6
7
8
9
MENU
0
TV/AV
to Off.
1.
2.
3.
4.
the 'Manual programme tuning' steps 1 to 3.
Press the Δ / Ε button to select Booster.
Press the Γ button.
Repeat
Press the Δ / Ε button to select On
down
or
Off
on
the Booster
pull-
menu.
Φ button.
5.
Press the OK
6.
Press the TV/AV button to return to normal TV
or
viewing.
PR
Fine
tuning
Normally
1.
2.
3.
4.
fine
tuning
VOL
is
only
necessary if
the 'Manual programme tuning'
Press the Δ / Ε button to select Fine.
Press the Γ button.
Repeat
Press the Φ / Γ
sound
on
pull-down
VOL
OK
PR
()
1 to 3.
picture
and
menu.
PR.
{
System
{
Channel
{
Fine
{
Search
{
Name
{
}{OOKOMENUOTV
6.
steps
button to fine tune for the best
the Fine
Booster
5.
is poor.
reception
()
{{{{
{
AV
Press the OK button.
Press the TV/AV button to return to normal TV
The
finely tuned programme will
during programme selection.
be indicated
viewing.
by a gray number
11
Setting up
Station
Menu
CH.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavoriteOprogramme
{
Language
{
()O{OOKOMENUOTV
AV
{
{
Programme
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
press the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select Programme
edit.
Press the Γ button to display the Programme edit menu.
Repeatedly
00O-O-O-O-O-
O05O SO 6O
9
01O CO 0O
3OO06O SO 1O
7
02O CO 1O
2OO07O SO 2O
2
03O SO 6O
6OO08O CO 0O
9
04O SO 6O
7OO09O CO 1O1
DeleteOOOCopy
1
2
MoveOOOOOSkip
3
()O}{O OKOMENUOTV
4
5
6
7
8
9
MENU
0
TV/AV
Deleting
1.
2.
AV
a
programme
Select a programme to be deleted with the Δ / Ε or Φ / Γ button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
00O-O-O-O-O-
O05O SO 6O
9
01O CO 0O
3OO06O SO 1O
7
02O CO 1O
2OO07O SO 2O
2
03O SO 6O
6OO08O CO 0O
9
PR
04O SO 6O
7OO09O CO 1O1
()
Delete
VOL
VOL
OK
PR
MENUOTV
()
Copying
1.
2.
programme
Select a programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
Moving
1.
2.
3.
AV
a
or
Φ / Γ button.
one
position.
a
programme
Select a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
00O-O-O-O-O-
again
to release this function.
O05O SO 6O
9
01O CO 0O
3OO06O SO 1O
7
02O CO 1O
2OO07O SO 2O
2
03O SO 6O
6OO08O CO 0O
9
04O SO 6O
7OO09O CO 1O1
MoveOOff
()O}{O MENUOTV
Skipping
1.
2.
3.
a
AV
programme number
programme number to be
Select a
skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
gramme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV button to return to normal TV
12
viewing.
Setting up
TV stations
Favorite programme
CH.
This function lets you select your favorite programmes
1.
2.
3.
press the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select Favorite
Repeatedly
programme.
Press the Γ button to
CH.
display the Favorite programme
AutoOprogramme
ManualOprogramme
6.
7.
8.
menu.
ProgrammeOedit
FavoriteOprogramme
{
Language
{
()O{OOKOMENUOTV
{
SOff
S56n Ca 05
Language
{
{
AV
S--O--O-O-O-O-S
S--O--O-O-O-OS--O--O-O-O-OS--O--O-O-O-O-
AV
--
1
2
3
4
5
6
7
8
9
MENU
0
TV/AV
press the Q.VIEW button to select stored favorite proPR
grammes.
Calling
Station
Menu
{
{
{
Press the Δ / Ε button to select
-----.
Select a desired programme with the Φ / Γ button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
To store another programme, repeat steps 4 to 5.
You can store up to 5 programmes.
Press the OK button.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
{
{
ProgrammeOedit
FavoriteOprogramme
()O}OOKOMENUOTV
4.
5.
directly.
AutoOprogramme
ManualOprogramme
VOL
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
VOL
OK
PR
Q.VIEW
()
()
LIST
Displaying programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
00O-O-O-O-O-
O05O SO 6O
9
01O CO 0O
3OO06O SO 1O
7
02O CO 1O
2OO07O SO 2O
2
03O SO 6O
6OO08O CO 0O
9
04O SO 6O
7OO09O CO 1O1
()O}{O OKOMENUOTV
AV
Note :
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
Select a programme with the Δ / Ε or Φ / Γ button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
Paging through a programme table
are 10 (or 20) programme table pages in which contain 100
(or 200) programmes.
Pressing the Δ / Ε or Φ / Γ button repeatedly turns the pages.
There
Press the TV/AV button to return to normal TV
viewing.
13
Picture
Picture
Menu
CH.
PSM
{
User
{
PSM (Picture Status
1.
2.
3.
()O{OOKOMENUOTV
adjustment
Memory)
Repeatedly press the MENU button to select the Picture menu.
Press the Γ button and then Δ / Ε button to select PSM.
Press the Γ button and then Δ / Ε button to select a picture
setting on the PSM pull-down menu.
AV
CH.
PSM
{
SDynamic
User
{
SStandard
SMild
SGame
SUser
()O}OOKOMENUOTV
4.
5.
Press the OK or Φ button.
Press the TV/AV button to return to normal TV
You
MENU
TV/AV
PR
VOL
VOL
OK
PR
You
can
ness
()
viewing.
also recall a desired picture (Dynamic, Standard,
Mild, Game or User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for good picture reproduction at the factory and cannot be changed.
can
Picture
()
AV
1.
2.
3.
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
press the MENU button to select the Picture menu.
Press the Γ button and then Δ / Ε button to select User.
Press the Γ button and then Δ / Ε button to select the desired
picture item on the User pull-down menu.
Repeatedly
CH.
PSM
{
User
{
CContrast
{
i
PSM
()O}{O OKOMENUOTV
4.
5.
CBrightness
{
CColour
{
CSharpness
{
CTint
{
AV
Press the Γ button.
Press the Φ / Γ button to make
each sub menu.
appropriate adjustments
Contrast
()O}{O OKOMENUOTV
6.
7.
14
on
the
80
AV
You can also select other User items directly with Δ / Ε button
and adjust them with Φ / Γ button.
Press the OK button to store it for the picture User.
Press the TV/AV button to return to normal TV viewing.
Picture
adjustment
Eye (option)
On
some models, the set will automatically adjust the picture
according to the surrounding conditions. This will enable you to
enjoy the most suitable picture according to the surroundings.
Press the EYE/* button to switch the eye function
on or
off.
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the
display
but the display
tion changes.
in
Note
eye
in green does not appear continuously
appears each time the picture condi-
yellow
If you press the PSM
:
or
TURBO PICTURE button with the
function, the eye function is automatically switched off.
EYE/
Turbo
picture
selection
(option)
When this function is on, the picture will be more brilliant and dispicture than normal picture. You can enjoy the Turbo picture so
tinct
much better than normal
Repeatedly
picture.
press the TURBO PICTURE button to switch
on or
off.
TURBO
(Turbo
Picture
PSM
(Turbo Picture on)
off)
PICTURE
TURBO/
Note
:
If you press the PSM
or
EYE/* button with the Turbo
picture
function, the Turbo picture function is automatically switched off.
15
Sound
Sound
Menu
CH.
SSM
{
Balance
{
adjustment (option)
Sound adjustment is an optional function only
adjustment can perform this function.
SSM
You
()O{OOKOMENUOTV
AV
a
set with sound
(Sound Status Memory)
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of the equalizer. The surround sound creates an all around sound as in a concert hall.
can
Speech
press the MENU button to select the Sound menu.
Press the Γ button and then Δ / Ε button to select SSM.
Press the Γ button and then Δ / Ε button to select a sound setting on the SSM pull-down menu.
1.
Repeatedly
2.
3.
CH.
SSM
{
FFlat
Balance
{
FMusic
FMovie
FSpeech
FUser
MENU
TV/AV
()O}OOKOMENUOTV
PR
VOL
{
AV
Sound Frequency Adjustment
a. Press the Γ button in User to
()
display
the User sub
VOL
OK
0.1O0.5O1.5O5.0O10OkHz
PR
menu.
()
()O}{O OKOMENUOTV
AV
(RF STEREO, Flat)
0.1O0.5O1.5O5.0O10OkHz
()O}{O OKOMENUOTV
AV
(AV STEREO, Flat)
b. Select a sound band by pressing the Φ / Γ button.
c. Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
The display Stored appears.
SSM/
Press the TV/AV button to return to normal TV
viewing.
You
can
also recall a desired sound (Flat, Music, Movie,
Speech or User) with SSM/* button on the remote control. The
sound Flat, Music, Movie and Speech are programmed for optimum sound reproduction at the factory and cannot be changed.
If you press the SSM/* button after making appropriate
on the User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Flat, Music, Movie or Speech.
Note
:
adjustment
16
Sound
Balance
You
1.
2.
3.
can
adjustment (option)
adjustment
adjust
CH.
SSM
{
Balance
{
Sound
Menu
balance.
press the MENU button to select the Sound menu.
Press the Γ button and then Δ / Ε button to select Balance.
Make desired adjustment with the Φ / Γ button on the Balance
Repeatedly
pull-down
CH.
SSM
{
Balance
{
}{O OKOMENUOTV
5.
AV
FFFFF0
AV
Press the OK button.
Press the TV/AV button to return to normal TV
4.
()O{OOKOMENUOTV
menu.
Turbo sound selection
viewing.
(option)
MENU
When this function is on, the sound will be more emphasized and
amplified sound than normal sound. You can enjoy the Turbo
Sound so much better than normal Sound.
Repeatedly press the TURBO SOUND button to switch on or off.
PR
VOL
Sound
off)
(Turbo
Sound
I/II/
()
VOL
OK
PR
TURBO
(Turbo
TV/AV
()
on)
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
SOUND
TURBO/
press the I/II/* button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
:
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
17
Sound
adjustment (option)
Stereo/Dual
reception (option)
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo
signal is weak, you can switch to
the I/II/* button twice. In mono reception the
depth of sound is improved. To switch back to stereo, press the
I/II/* button twice again.
mono
by pressing
Language selection
If
for dual
language broadcast
programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II/* buta
ton
I/II/
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II/* button repeatedly.
1.
2.
3.
When
NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
18
Other functions
TV and AV modes
CH.
be set for TV or AV mode. AV mode is used when a video
Inputs
cassette recorder (VCR), or other equipment is connected to the set.
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
Repeatedly press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Input.
Press the Γ button and then Δ / Ε button to select TV, AV or
COMPONENT(option) on the Input pull-down menu.
CH.
Input
{
TTV
ChildOlock
{
{
TAV
AutoOsleep
BlueOback
AVL
CSM
Game
4.
In AV
mode,
can
Menu
{
{
{
{
Timer
{
()O{OOKOMENUOTV
AV
1
2
3
{
4
5
6
7
8
9
MENU
0
TV/AV
AV
select the TV
to return to TV
{
{
Note :If both the input jacks on the front/side panel and back
panel have been connected to external equipments simultaneously, only the input jacks on the front/side panel can be received.
you
TV/AV button.
Special
{
BlueOback
AVL
CSM
Game
TCOMPONENT
{
{
AV : VCR connected to the Euro scart socket or AV sockets on
the set
DVD : COMPONENT connected to the COMPONENT sockets
on the set (option)
Press the TV/AV button to return to normal TV viewing.
Alternatively
{
AutoOsleep
{
Timer
()O}OOKOMENUOTV
Input
ChildOlock
or
AV mode
by pressing
PR
VOL
VOL
OK
the
PR
mode, press the
()
()
Δ / Ε or NUMBER but-
tons.
Auto AV
switching (option)
If your VCR outputs a switching voltage when connected to the
Euro scart socket, the set will switch to AV mode automatically.
The set is automatically switched to AV mode when an AV signal
is input. But if you want to keep on watching TV mode, press the
Δ / Ε or NUMBER buttons.
Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Child lock.
Press the Γ button and then Δ / Ε button to select On or Off on
the Child lock pull-down menu.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the front panel is pressed while displaying the menus.
19
Other functions
Special
CH.
Menu
Input
{
ChildOlock
{
AutoOsleep
{
{
BlueOback
AVL
CSM
Game
{
{
{
Timer
Auto
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
{
()O{OOKOMENUOTV
AV
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Auto sleep.
Press the Γ button and then Δ / Ε button to select On or Off on
the Auto sleep pull-down menu.
Press the TV/AV button to return to normal TV viewing.
1.
2.
3.
Repeatedly
4.
Blue back
(option)
If you select On
ground appears
TV/AV
VOL
4.
PR
(Auto Volume Leveler) (option)
If you select AVL On, the set automatically
ume level even if you change programmes.
()
VOL
OK
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
Repeatedly
AVL
PR
on
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Blue back.
Press the Γ button and then Δ / Ε button to select On or Off on
the Blue back pull-down menu.
Press the TV/AV button to return to normal TV viewing.
1.
2.
3.
MENU
on
()
CSM
1.
2.
3.
4.
equal
vol-
Repeatedly
You
or
on an
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select AVL.
Press the Γ button and then Δ / Ε button to select On or Off on
the AVL pull-down menu.
Press the TV/AV button to return to normal TV viewing.
1.
2.
3.
4.
SLEEP
keeps
(Colour Status Memory)
can
select the
bluish,
as
you
picture
prefer.
colour status;
standard, reddish, greenish
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select CSM.
Press the Γ button and then Δ / Ε button to select Standard,
Reddish, Greenish or Bluish on the CSM pull-down menu.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
Sleep
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The dis--:-- will appear on the screen, followed by 00:10, 00:20,
play
00:30, 01:00, 01:30, 02:00, 03:00 and 04:00. The timer begins to
count down from the number of minutes selected.
Note :
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
--:-- appears.
c.
When you switch the set off, the set releases the preset sleep
time.
a.
20
Game
(option)
Game is an optional function, only a set with game can perform this
function by using the remote control handset. You can enjoy only
two of four games below with this set.
Block & Balloon
1.
2.
3.
4.
5.
(option)
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Game.
Γ
Press the
button to enter the game mode.
Press the Φ / Γ button to select the game 1 or 2 and then press
the OK button.
Press the Φ / Γ button to select a level and then press the OK
button.
Repeatedly
CH.
Input
{
ChildOlock
{
AutoOsleep
{
BlueOback
AVL
CSM
Game
{
Special
Menu
{
{
{
Timer
{
()O{OOKOMENUOTV
AV
1. Block
6.
Press the Δ / Ε button to select a block to shoot or to dump.
Press the Φ button to shoot the block aiming at the same colour
or press the Γ button to dump it. Remove all the blocks on the
screen with given blocks, whose remaining number is displayed
on the right bottom of the screen. If you use up all the given
blocks or the dumped blocks are accumulated to the end, you
lose. Press the OK button to start.
2. Balloon
6.
Press the Δ / Ε button to move the arrow.
Press the Φ button to shoot an arrow aiming balloon only.
The numbers of balloons you should hit and have hit are displayed on the right bottom of the screen. If you miss a balloon,
it will be accumulated and you lose the space to move the
arrow. If the missed balloons or the hit bricks are accumulated
at the end, you lose. Press the OK button to start.
Cricket & Car
1.
2.
3.
4.
racing (option)
MENU
PR
VOL
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Game.
Press the Γ button to enter the game mode.
Press the Φ / Γ button to select the game 1 or 2 and then press
the OK button.
TV/AV
()
VOL
OK
Repeatedly
PR
()
1. Cricket
5.
Press the Δ / Ε button to select a number of overs to play, then
press the OK button.
6.
Press the Δ / Ε button to select a your team, then press the OK
button.
7.
Press the Δ / Ε button to select a computer team, then press
the OK button.
8.
Press the Δ / Ε button to select a uniform colour of your team,
then press the OK button.
9.
Press the Φ / Γ button to select HEADS or TAILS, then press
the OK button.
10. Press the Δ / Ε button to select BATTING or FIELDING, then
press the OK button.
11. Press the Δ / Ε button to select a bowler type, then press the
OK button to start the game.
For fielding, first select a ball type with the Φ / Γ button and then
press the OK button. Secondly select a bowl direction with the
Φ/Γ/Δ/ΕbuttonandthenpresstheOKbuttontothrowthe
ball. For batting, select a hitter position with the Φ / Γ / Δ / Ε
button and then press the OK button to hit the ball. After hitting
the ball, control the hitter with the Δ / Ε button.
2. Car racing
5.
Press the Δ / Ε button to select a round, then press the OK button to start the game.
Controlthecarwiththe Φ/Γ/Δ/Εbutton.
Note :
Press the TV/AV
a.
b.
or
viewing.
If you want
the game.
a new
MENU button to return to the normal TV
game, press the RED button to start
during
21
Timer
Special
CH.
Menu
{
Input
ChildOlock
{
AutoOsleep
{
BlueOback
AVL
CSM
Game
{
Timer
{
{
{
Timer
ment
(option)
adjustment is an optional function only
perform this function.
set with timer
adjust-
Off timer
{
()O{OOKOMENUOTV
AV
The off timer automatically switches the set to
set time elapses.
1.
2.
3.
6.
7.
pre-
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Timer.
Press the Γ button and then Δ / Ε button to select Off timer.
Offotimer
{
Onotimer
{
-i-i:i-i-
AV
Press the Γ button.
Select and adjust hour and minute
ton.
TV/AV
standby after the
Repeatedly
()O}{OOKOMENUOTV
4.
5.
MENU
a
can
by pressing
Press the OK button.
Press the TV/AV button to return to normal TV
the Φ / Γ but-
viewing.
On timer
PR
VOL
()
VOL
OK
PR
()
The on timer automatically switches on after the preset time
es with desired programme number and volume.
1.
2.
3.
elaps-
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Timer.
Press the Γ button and then Δ / Ε button to select On timer.
Repeatedly
Offotimer
Onotimer
{
{
-i-i:i-i-
Programmeo1
Volumeooo30
()O}{O OKOMENUOTV
4.
5.
6.
7.
AV
Press the Γ button and then Δ / Ε button to select the desired
timer item; --:--, Programme or Volume.
Make desired adjustment with the Φ / Γ button on each pulldown menu.
Press the OK button.
Press the TV/AV button to return to normal TV viewing.
You
can set the on/off timer from 10 minutes up to 12 hours 50 minutes in 10 minutes steps. The timer begins to count down from the
selected time period.
Note :
This set must be put into standby mode with the POWER button
on the remote control to operate the on timer function.
b. To view the remaining on/off time, select Timer menu.
c.
To cancel the set on/off time, set the on/off timer to --:--.
d. When you switch the power off, the on/off time is reset.
a.
22
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TV/AV button to switch off teletext. The previous mode
1
2
3
4
5
6
7
8
9
0
TV/AV
MENU/INDEX
reappears.
TV
SIMPLE text
PR
Page selection
1.
2.
OK
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the preceding or fol-
lowing
page.
Programming
a
()
PR
()
TEXT
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M button to switch to LIST mode.
or
FASTEXT
mode, press the
M
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
a
2.
Using
the NUMBER
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
4.
coloured button.
buttons, select the page you wish
to pro-
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
23
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4. The red button permits to return to previous selection.
Alternatively the Ε button can be used.
1
2
3
4
5
6
Direct page selection
9
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
7
8
INDEX
TOP mode.
0
i
FASTEXT
PR
()
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page selection
PR
()
1.
2.
3.
4.
Press the INDEX button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the preceding or fol-
lowing
24
page.
Teletext
Special
(option)
teletext functions
REVEAL/
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE/
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
1
2
3
4
5
6
7
8
9
UPDATE/
Displays
the TV
picture
the
on
screen
teletext page. The display
corner of the screen. When the
while
waiting
for the
new
0
will appear at the top left hand
updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
PR
()
PR
()
HOLD/
Stops
the automatic page
text page consists of 2
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
or more
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
MIX
SIZE/
HOLD/
TIME/
REVEAL/
screen
UPDATE/
X
?
MIX/
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
picture
off press this button
again.
TIME/
When
viewing
a
the time at the
button
again
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED /
NUMBER buttons.
change
Press this button
again
GREEN,
Δ / Ε or
to exit this function.
25
Connection of external
You
can
connect additional
equipment
equipment,
such
as
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
ANT IN
Y
PB
DVD INPUT
LL 75Ω
PR
COMPONENT
(480)
OUT
L
VIDEO
AUDIO
(L) -AUDIO-(R)
R
IN
Aerial socket
VCR
1.
Connect the RF out socket of the VCR to the aerial socket
on
the back of the set.
ANT IN
Y
LL 75Ω
PB
DVD INPUT
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel
4.
PR
COMPONENT
(480i)
OUT
2.
L
VIDEO
(L) -AUDO-(R)
AUDIO
stored.
R
IN
on the programme number 0 using the
'Manual programme tuning' section.
Select the programme number where the VCR channel is
5.
Press the PLAY button
the VCR.
on
VCR
Audio-L/R(or Audio)/Video in/out sockets (option)
1.
Connect the audio/video out sockets of the VCR to the Audio-
L/R(or Ausio)/video
in sockets of the set and in sockets of the
VCR to out sockets of the set.
MENU
OK
VOL
2.
PR
If the VCR is connected to the AV sockets
on
the set, press the
TV/AV button to select AV.
3.
Press the PLAY button
The VCR
VCR
You
can
on
playback picture
the VCR.
appears
on
the
also record programmes received
out sockets.
screen.
by
the TV
on
video
tape via audio/video
Note
a.
OUT
75Ω
VIDEO
(L) AUDIO- (R)
-
IN
b.
VCR
OUT
VIDEO
IN
VCR
26
panel and back panel
equipments simultaneously,
only the input jacks on the front/side panel can be received.
In the mono models with cricket and car racing games, the TV
screen picture isn't output through the audio/video out sockets.
input jacks
on
the front/side
have been connected to external
ANT IN
ANT IN
75Ω
:
If both the
AUDIO
Connection of external
Euro scart socket
1.
equipment
(option)
Connect the Euro scart socket of the VCR to the Euro scart
ANT IN
LL 75Ω
socket of the set.
2.
Press the PLAY button
on
the VCR.
If your VCR outputs a switching voltage when connected to a
Euro scart socket, the set will switch to AV mode automatically.
But if you want to keep
NUMBER buttons.
on
watching
TV
mode, press the
VCR
Δ / Ε
or
Otherwise press the TV/AV button on the remote control handset to select AV. The VCR playback picture appears on the
screen.
ANT IN
L L 75Ω
You
can
also record programmes received
by
the TV
on
Y
PB
DVD INPUT
PR
(480i)
COMPONENT
OUT
video
L
VDEO
(L) -AUDIO-(R)
AUDIO
R
IN
tape.
: If you want to watch the signals from the input jacks on the
front/side panel, disconnect the Euro scart socket of the VCR from
Note
the Euro scart socket
Component
1.
on
in sockets
(option)
Connect the COMPONENT video
Pb Pr
or
Y B-Y
R-Y)
4.
(Y
PB
PR)
on
(480i)
MENU
OK
VOL
PR
to the COM-
the set.
Connect the audio cable from the COMPONENT to COMPONENT AUDIO sockets
3.
output sockets (Y Cb Cr, Y
of the COMPONENT
PONENT DVD INPUT sockets
2.
COMPONENT
the back of the set.
on
the set.
Press the TV/AV button to select COMPONENT.
Press the PLAY button
The COMPONENT
Headphone
Only
on
the COMPONENT.
playback picture
socket
appears
on
the
screen.
(option)
models which have
a
headphone
socket
can
perform
this
function.
Insert the
You
can
headphone plug
to the
listen to the sound
headphone volume,
headphone socket of the set.
through the headphones. To adjust
the
press the Φ / Γ button.
If you press the MUTE
switched off.
button, the sound from the headphone's is
27
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
Download PDF

advertising