LG | RT-23LZ41 | LG RT-23LZ41 Owner’s Manual

LCD
Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
cover
require
and
quote this infor-
service.
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function
On screen language selection (option)
8
On
9
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Programme edit
Favourite programme
Calling the programme table
Setting
10
Picture adjustment
PSM (Picture Status Memory)
Picture adjustment
Picture format (option)
15
Sound adjustment
SSM (Sound Status Memory)
Sound adjustment / Stereo/Dual reception
NICAM reception (option) / Sound output selection
17
Time Menu
Clock / On/Off time
Auto off / Sleep timer
19
Other functions
TV, AV and PC (option) modes
Child lock
Blue back (option)
21
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
23
Connection of external equipment
Aerial socket
Audio/Video in sockets
S-Video/Audio in sockets (S-Video)
DVD input sockets (option)
DTV in sockets
26
Connection of PC (option)
PC in socket (option)
PC Setup (only DVI-Analoge
Troubleshooting
2
check list
(option)
28
mode) (option)
31
Installation
Power
-
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
a. Open the back panel cover.
b. After connecting the power cord to the set, connect the power
cord to an AC mains.
c. Fix cables with the supplyed cable tie after arranging connected
cables.
d. Pull the cables through the hole on the set.
e. Close the back panel cover.
Here shown may be somewhat
different from your set.
a
e
Warning
To prevent fire or shock hazard, do not expose the set to rain or
moisture. Do not rub or strike the Active Matrix LCD with anything
hard as this may scratch, mar, or damage the Active Matrix LCD
permanently.
Service
Never
remove
the back
cover
of the set as this can expose you to
the set does not operate proper-
high voltage and other hazards. If
ly, unplug it and call your dealer.
b
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back.
For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
This standing angle can be adjusted as shown in pictures.
If you intend to mount the TV to a wall, attach VESA standard mounting interface (optional parts) to the back of the TV.
When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
d
Cleaning
Unplug the set before cleaning the face of the LCD Screen. Dust
the set by wiping the screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
On
Disposal
The fluorescent lamp used in this product contains a small amount
of mercury.
Do not dispose of this product with general household waste.
Disposal of this product mute be carried out in accordance to the
regulations of your local authority.
3
Location and function of controls
All the functions
Some functions
10
MUTE
POWER
1
11
TV/AV MULTIMEDIA
I/II
2
12
LIST
Remote control handset
Q.VIEW MENU
13
34
PR
5
be controlled with the remote control handset.
also be adjusted with the buttons on the side
panel of the set. Only the remote control handset supplied will operate this set.
can
can
Before you use the remote control handset,
teries. See the next page.
1.
OK
VOL
VOL
MUTE
switches the sound
on or
please
install the bat-
off.
PR
2.
123
6
456
3.
789
78
TV/AV
selects TV or AV monitor mode.
clears the menu from the screen.
switches the set on from standby.
SSM
0
SLEEP
ARC
PSM
14
4.
the programme table.
Q.VIEW
returns to the
TEXT
9
15
UPDATE
TIME
SIZE
MIX
HOLD
REVEAL
INDEX
MODE
selects
5.
?
i
LIST
displays
M
a
previously
viewed programme.
favourite programme.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Down/up)
adjusts the volume.
adjusts
menu
settings.
OK
accepts your selection
6.
(With TELETEXT/ARC)
789
SSM
0
TEXT
UPDATE
TIME
SIZE
MIX
HOLD
REVEAL
?
(Without ARC)
(With TELETEXT)
4
NUMBER BUTTONS
switches the set on from
the current mode.
displays
standby
and selects
7.
SSM (Sound Status Memory)
recalls your preferred sound setting.
8.
ARC (option)
select your desired
PSM
SLEEP
or
9.
SLEEP
sets the
sleep
picture
format.
timer.
10. MULTIMEDIA (option)
selects COMPONENT or PC monitor mode.
a
programme.
Location and function of controls
11. POWER
switches the set
on
from
standby
off to
or
standby.
10
12. I/II
MUTE
selects the language during dual language broadcast.
selects the sound output (option).
POWER
1
11
TV/AV MULTIMEDIA
I/II
2
13. MENU
selects
14. PSM
12
LIST
a menu.
13
34
(Picture Status Memory)
preferred picture setting.
PR
recalls your
5
15. TELETEXT BUTTONS
Q.VIEW MENU
OK
VOL
(option)
VOL
PR
These buttons are used for teletext.
For further details, see the 'Teletext' section.
123
* : No function
COLOURED BUTTONS
TELETEXT
models)
or
These buttons
programme edit.
:
are
used for teletext
(only
6
456
789
SSM
Battery
789
installation
0
PSM
14
SLEEP
The remote control handset is powered by two AAA/Alkaline type batteries. To load the batteries, turn
the remote control handset over
and open the battery compartment.
Install two batteries as indicated by
the polarity symbols ( + and
)
marked inside the compartment.
-
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
(Without TELETEXT/ARC)
SSM
0
SLEEP
ARC
PSM
(With ARC)
(Without TELETEXT)
5
Location and function of controls
Side
panel
RT-23/26/27/30/32LZ50
PR
7
VOL
6
OK
5
MENU
4
TV
AV/ PC
8
9
2
1
RT-26LZ30
PR
7
VOL
6
OK
5
MENU
TV
AV/PC
4
2
1
OFF
O
9
8
RT-17LZ50
PR
7
VOL
6
OK
5
MENU
TV
AV/PC
4
2
1
OFF
O
9
8
RT-15LA70
7
PR
VOL
6
OK
R
5
MENU
4
9
TV/A PC
2
8
/ION F
1
RT-15LA66
PR
VOL
6
OK
5
MENU
TV
AV/PC
9
R
7
/I
ON/OFF
4
2
1
8
RT-20LA70
PR
VOL
OK
MENU
TV/AV
R
9
8
6
/ION/F
7
6
5
4
3
1
Location and function of controls
Side
panel
RT-20LA66
7
PR
VOL
6
OK
5
MENU
4
TV
3
AV
9
1
/I
ON/OFF
8
RT-23LZ41
7
PR
6
OK
5
4
MENU
9
R
VOL
2
TV
AV/PC
8
1
/I
ON/OFF
RT-17LZ40
Top panel
ON/OFF
TV/AV/PC
MENU
OK
VOL
4
5
6
PR
9
R
12
7
8
1.
ON/OFF(
6.
/I)
switches the set
on
from
standby
or
off to
standby.
2.
7.
TV/AV/PC
3.
clears the
or
(Programme Up/Down)
a programme or a menu item.
switches the set on from standby.
standby.
AV mode.
menu
switches the set
8.
REMOTE CONTROL SENSOR
from the
9.
POWER/STANDBY INDICATOR
on
from
illuminates red in
screen.
standby
( )
mode.
illuminates green when the set is switched
standby.
on.
MENU
selects
5.
from
D / E
TV/AV
selects TV
4.
on
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
selects
selects TV, AV or PC monitor mode.
clears the menu from the screen.
switches the set
F / G
a menu.
OK
accepts your selection
or
displays
the current
mode.
7
Basic
operation
On and off
1.
2.
3.
MUTE
POWER
TV/AV MULTIMEDIA
Press the POWER, D / E, TV/AV, MULTIMEDIA (option)
NUMBER buttons to switch it on fully.
Press the POWER button. The set reverts to standby mode.
Pull out mains plugs to switch the set off.
or
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
I/II
Programme
selection
You
a
Q.VIEW MENU
can
select
programme number with the D / E
or
NUMBER
buttons.
PR
Volume
OK
VOL
VOL
adjustment
Press the F / G button to
PR
adjust
the volume.
Quick view
123
Press the Q.VIEW button to view the last programme you
456
789
SSM
were
watching.
Note : This function works only when Favourite programme is set
to Off. Otherwise each press of this button will select a stored
favorite programme.
0
Mute function
Press the MUTE button. The sound is switched off and the
appears.
You can cancel it
On
The
screen
menu
by pressing
language
can
be
the
MUTE,
selection
displayed on the
language.
F /
display
G, I/II,orSSM button.
(option)
screen
in your desired lan-
guage. First select your
1.
Press the MENU button and then D / E button to select the
Setup
2.
3.
menu.
Press the G button and then D / E button to select Language.
Press the G button and then D / E button to select your desired
language.
All the
8
on screen
displays
will appear in the selected
4.
Press the OK button.
5.
Press the TV/AV button to return to normal TV
language.
viewing.
On
screen menus
Menu selection
1.
Press the MENU button and then D / E button to display each menu.
Press the G button and then D / E button to select a menu item.
3. Change the setting of an item in the sub or pull-down menu with
F / G button.
You can move to the higher level menu by pressing the OK button and to move to the lower level menu by pressing the MENU
button.
Note :
In the TV/AV, COMPONENT (option) mode, the PC menu is not
a.
2.
displayed.
b.
c.
In the teletext mode, menus are not displayed.
On some models, the Language will not be displayed.
MENU
Picture
Channel
Auto programme
PSM
Manual programme
Contrast
PR
Programme edit
Brightness
Favourite programme
Colour
OK
VOL
Sharpness
DEFG
OK
DEFG
MENU
Channel
OK
MENU
Picture
menu
VOL
PR
menu
Sound
Setup
SSM
Language
Input
AVL
Balance
Child lock
DEFG
OK
MENU
Setup
DEFG
OK
MENU
Sound
menu
menu
Time
Time
Off time
On time
Auto off
DEFG
OK
MENU
Time
menu
9
TV stations
Setting up
Channel
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
Manual programme
Programme edit
Favourite programme
Auto programme
DEFG
OK
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
MENU
1.
2.
Press the MENU button and then D / E button to select the
Channel menu.
Press the G button and then D / E button to select Auto programme.
Auto programme
System
Storage
TV/AV
BG
from
IDK
LM
Search
MENU
DEFG
Press the G button. Select a TV system with the G button and
then D / E button on the System menu;
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
L
: SECAM L/L' (France)
M
: (USA/Korea/Philippines)
4.
Press the OK button.
5.
6.
Press the D / E button to select Storage from.
Select the beginning programme number with the F / G button
or NUMBER buttons on the Storage from pull-down menu. Any
number under 10 is entered with a numeric '0' in front of it, i.e.
'05' for 5.
Press the D / E button to select Search.
Press the G button to begin auto programming.
OK
VOL
PR
123
456
789
MENU
3.
PR
VOL
OK
7.
8.
0
Auto programme
System
Storage
from
Search
C21
BG
2
5
%
MENU
All receivable stations
are
stored.
Option: In Australia, if no station name can be assigned to a
folstation, the channel number is assigned and stored as
-----
lowed
number see
by
assign the station name.
a
'Assigning
a
station name' section to
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
10
Press the TV/AV button to return to normal TV
viewing.
Setting up
Manual programme
TV stations
tuning
Channel
Auto programme
Manual programme
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
Press the MENU button and then D / E button to select the
Channel menu.
Press the G button and then D / E button to select Manual pro-
3.
gramme.
Press the G button and then D / E button to select
Programme edit
Favourite programme
DEFG
OK
MENU
Storage.
Manual programme
29
Storage
System
Channel
TV/AV
Search
Name
MENU
DEFG
4.
5.
6.
OK
MENU
Select the desired programme number (0 to 99) with the F / G
button or NUMBER buttons on the Storage menu. Any number
under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5.
Press the D / E button to select System.
Select a TV system with the G button and then F / G button on
the System menu;
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
L
: SECAM L/L' (France)
M
:
PR
OK
VOL
VOL
PR
123
(USA/Korea/Philippines)
7.
Press the OK button.
8.
9.
Press the D / E button to select Channel.
Press the G button and then D / E button to select VHF/UHF or
Cable on the Channel menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
456
789
0
10. Press the OK button.
11. Press the D / E button to select Search.
12. Press the G button and thenF / G button to commence searching on the Search pull-down menu. If a station is found the
search will stop.
Manual programme
Storage
System
Channel
Search
GGG
Name
DEFG
OK
MENU
13. Press the OK button to store it.
14. To store another station, repeat steps 3 to 13.
15. Press the TV/AV button to return to normal TV viewing.
11
Setting up
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
Channel
Auto programme
Manual programme
3.
1 to 2.
Press the G button and then D / E button to select Name.
Press the G button and then use the D / E. You can use a blank,
4.
With the F button you can select in the opposite direction.
Select the position by pressing the F / G button and then make
5.
your choice of the second character, and
Press the OK button to store it.
6.
Press the TV/AV button to return to normal TV
2.
Programme edit
Favourite programme
+,
DEFG
OK
MENU
TV/AV
MENU
PR
OK
VOL
VOL
PR
12
TV stations
-,thenumber0to9andthealphabetAtoZ.
so on.
viewing.
Setting up
Programme
TV stations
Channel
edit
Auto programme
Manual programme
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
Press the MENU button and then D / E button to select the
Channel menu.
Press the G button and then D / E button to select Programme
edit.
Press the G button to display the Programme edit Menu.
Deleting
1.
2.
0C0 3
5S6 9
1BLN03
6S17
2C1 2
7-----
3S6 6
8-----
4S6 7
9-----
Delete
Copy
Move
Skip
Programme edit
Favourite programme
DEFG
OK
MENU
TV/AV
MENU
a
programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
PR
OK
VOL
0C0 35S
69
1BLN03
6S17
2C1 2
7-----
3S6 6
8-----
4S6 7
9-----
VOL
PR
123
Delete
456
Copying
1.
2.
programme
Select a programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
Moving
1.
2.
3.
a
or F
one
/ G button.
position.
789
0
a
programme
Select a programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
theD/EorF/Gbutton.
4.
Press the YELLOW button
again
to release this function.
a programme number
Select a programme number to be skipped with the D / E or F / G
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that you will be
unable to select it using the D / E button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Skipping
1.
2.
3.
Press the TV/AV button to return to normal TV
viewing.
13
Setting up
TV stations
Favourite programme
Channel
Auto programme
This function lets you select your favourite programmes
Manual programme
Programme edit
1.
Favourite programme
2.
directly.
Press the MENU button and then D / E button to select the
Channel menu.
Press the G button and then D / E to select Favourite programme.
DEFG
OK
MENU
Favourite programme
On
--
-----
--
-----
--
-----
--
-----
--
-----
--
-----
--
-----
--
-----
DEFG
TV/AV
3.
4.
LIST
Q.VIEW MENU
5.
6.
7.
MENU
Press the G button and then F / G button to select On
Press the D / E button to select
-----.
Select a desired programme with the F / G button.
To store another programme, repeat steps 4 to 5.
You can store up to 8 programmes.
Press the TV/AV button to return to normal TV viewing.
or
Off.
--
press the Q.VIEW button to select stored favourite pro-
Repeatedly
PR
OK
grammes.
OK
VOL
VOL
PR
123
456
Calling
the programme table
You
can check the programmes stored in the memory
the programme table.
programme table
Press the LIST button to display the
by displaying
Displaying
Programme
table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
789
0
0C0 3
5S69
1BLN03
6S17
2C12
7S22
3S66
8C09
4S67
9C11
Note :
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
programme with the D / E or F / G button.
Then press the OK button.
Selecting
Select
a
The set switches to the chosen programme number.
Paging through
There
are
a
programme table
10 programme table pages in which contain 100 pro-
grammes.
Pressing the D / E
or
F / G button
repeatedly
Press the TV/AV button to return to normal TV
14
turns the pages.
viewing.
Picture
PSM (Picture Status
adjustment
Memory)
Picture
1.
Press the MENU button and then D / E button to select the
Picture menu.
2.
Press the G button and then D / E button to select PSM.
Press the G button and then D / E button to select a picture set-
3.
ting
4.
on
the PSM
PSM
Contrast
Brightness
Colour
Sharpness
menu.
Press the OK button.
DEFG
OK
MENU
Picture
PSM
Dynamic
Contrast
Standard
Brightness
Mild
Colour
Game
Sharpness
User
DEFG
5.
OK
MENU
TV/AV
Press the TV/AV button to return to normal TV
You
also recall
viewing.
MENU
desired
picture (Dynamic, Standard, Mild,
on the remote control. The picture
User)
Mild
and
Game
are programmed for optimum
Standard,
Dynamic,
picture reproduction at the factory and cannot be changed.
can
Game
a
with PSM button
or
PR
Picture
You
OK
adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC input only) to the levels you prefer.
can
ness
1.
adjustment
VOL
VOL
PR
Press the MENU button and then D / E button to select the
Picture menu.
Picture
PSM
Contrast
47
Contrast
Brightness
Colour
Sharpness
DEFG
2.
3.
OK
Press the D / E button to select the desired
Press the F / G button to make appropriate
it will be stored for the
4.
PSM
MENU
picture
picture item.
adjustments,
Press the TV/AV button to return to normal TV
Note
:
Only
Contrast and
then
User.
viewing.
Brightness are displayed
in PC mode.
15
Picture
adjustment
Picture format
Picture
(option)
PSM
Contrast
You
Brightness
DEFG
can
watch TV in various picture formats; 16:9, 14:9, Auto, 4:3.
the ARC button to select your desired picture for-
Colour
Repeatedly press
Sharpness
mat.
OK
16:9
You can
MENU
enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
14:9
You can
enjoy the picture format of 14:9 or
the
14:9 mode.
through
The screen 14:9 is viewed just like that the
to the upper / lower and left / right.
TV/AV
TV programme
general
screen
4:3 is
magnified
MENU
Auto
When your set receives the wide screen signal, it will be automatically changed to the picture format to be sent.(Not available in all
countries)
PR
OK
VOL
VOL
PR
4:3
This
picture
Note
ARC
16
:
format is 4 to 3 of
16:9 and 4:3
are
general
TV.
available in PC mode
only.
Sound
SSM
You
Sound
(Sound Status Memory)
SSM
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of the equalizer.
can
Speech
1.
adjustment
AVL
Balance
Press the MENU button and then D / E button to select the
Sound menu.
Sound
SSM
Flat
AVL
Music
DEFG
OK
MENU
Movie
Balance
Speech
User
DEFG
2.
3.
OK
G
MENU
Press the G button and then D / E button to select SSM.
Press the G button and then D / E button to select a sound setting on the SSM menu.
Sound Frequency Adjustment
a. Press the OK button in User.
b. Select a sound band by pressing the F / G button.
c. Make appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
TV/AV
MENU
PR
OK
VOL
VOL
PR
0.1
0.5
1.5
5
10Khz
Press the TV/AV button to return to normal TV
You
viewing.
also recall a desired sound setting (Flat, Music, Movie, Speech
or User) with SSM button on the remote control. The sound settings
Flat, Music, Movie and Speech are programmed for optimum sound
reproduction at the factory and cannot be changed.
can
: If you press the SSM button after making appropriate adjustment on the User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Note
Flat, Music, Movie
or
SSM
Speech.
Sound
SSM
DEFG
Sound
AVL
On
Balance
Off
OK
MENU
adjustment
adjust balance, AVL (Auto
ically keeps on an equal volume
You
can
Volume Leveler). AVL automatlevel even if you change pro-
grammes.
1. Press the MENU button and then D / E button to select the
Sound menu.
2. Press the G button and then D / E button to select the desired
sound item; AVL or Balance.
3. Make desired adjustment with the F / G, D / E and then press
the OK button.
4.
Press the TV/AV button to return to normal TV
viewing.
17
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
I/II
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
selection for dual language broadcast
programme is received in two languages (dual language), you
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II but-
Language
If
OK
a
can
ton
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM MONO
or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or MONO. When FM
mono is selected the display MONO appears on the screen.
Sound output selection
In AV mode, you
can
select output sound for the left and
right
loud-
speakers.
Repeatedly press the I/II button to select the sound output.
:
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
L+R
18
TIME Menu
Clock
Time
Time
You must set the time
1.
using
Press the MENU button and then D
TIME
2.
before
correctly
on/off time function.
/ E
Off time
On time
button to select the
Auto off
menu.
Press the G button and then D
button to select TIME.
/ E
Time
DEFG
Time
OK
MENU
-i-i:i-i-
Off time
On time
Auto off
DEFG
OK
MENU
3.
Press the G button and then D
4.
Press the G button and then D
5.
Press the MENU button to
button to
/ E
button to
/ E
adjust the hour.
adjust the minute.
save.
MENU
On/Off Time
The off timer
automatically
switches the set to
at the pre-
standby
set time.
PR
1.
Press the MENU button and then D
TIME
2.
/ E
button to select the
menu.
OK
VOL
Press the G button and then D
button to select Off Time
/ E
or
VOL
PR
On Time.
3.
Press the G button and then D
To cancel Off/On Time
button to select On.
/ E
function, press the
button to
/ E
D
select Off.
Time
Time
Off time
-i-i:i-i-
On time
Pr.
Auto off
0
Vol.
30
On
DEFG
OK
MENU
4.
Press the G button and then D
5.
Press the G button and then D
6.
Only
On Time
button to
/ E
/ E
button to
function; Press the
G
adjust the hour.
adjust the minute.
button and then D
/ E
button to
7.
adjust volume level and programe number.
Press the MENU button to save.
Note :
a.
In the event of power interruption
ure), the clock must be reset.
b.
(disconnection
power fail-
Two hours after the set is switched
will
automatically switch
has been pressed.
back to
on by the on time function it
standby mode unless a button
c.
Once the
d.
the preset time.
Off Timer function overrides On Timer function if
the
e.
or
same
on or
off time is set, these functions operate
daily
they are
at
set to
time.
The set must be in
standby
mode for the On Timer to work.
19
TIME Menu
Time
Auto off
Time
Off time
If you select On on the Auto Off menu, the set will automatically
switch itself to standby mode approximately ten minutes after a TV
station stops broadcasting.
On time
Auto off
DEFG
OK
MENU
1.
Press the MENU button and then D
TIME menu.
2.
Press the G button and then D
Press the G button and then D
3.
/ E
/ E
/ E
button to select the
button to select Auto Off.
button to select On or Off.
Time
Time
Off time
On time
On
Auto off
Off
DEFG
MENU
4.
Sleep
PR
OK
VOL
VOL
PR
OK
MENU
Press the MENU button to
save.
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time has elapsed.
Press the SLEEP button to select the number of minutes. The disoff' will appear on the screen, followed by 10, 20, 30, 60,
play
90, 120, 180 and 240. The timer begins to count down from the
number of minutes selected.
'
Note :
a.
To view the
remaining sleep time, press
the SLEEP button
once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
off' appears.
When you switch the set off, the set releases the preset sleep
time.
'
SLEEP
20
c.
Other functions
AV and PC
TV,
(option)
modes
Setup
Language
Input
be set for TV, AV or PC mode. AV mode is used when a
video cassette recorder (VCR), or other equipment is connected to
the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external equipment' section.
1.
3.
DEFG
OK
MENU
Press the MENU button and then D / E button to select the
Setup
2.
Child lock
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1, AV2
(option), S-Video, Component (or Component 1, Component
2) or PC (option).
TV/AV
Setup
Language
Input
TV
Child lock
AV1
MENU
AV2
S-video
Component
Component
1
2
PC
DEFG
OK
PR
MENU
The AV and PC modes are :
AV 1 : VCR connected to the AV1 socket of the set.
AV 2 : VCR connected to the AV2 socket of the set.(option)
S-Video : VCR connected to the S-Video of the set.
Component (or Component 1) : DVD/DTV connected to the
DVD/DTV IN sockets of the set.
4.
DVD connected to the DVD IN sockets
Component
2
back of set.
(option)
:
on
can
select the TV
VOL
PR
123
the
456
PC : PERSONAL COMPUTER connected to the PC socket
of the set. (option)
Press the TV/AV button to return to normal TV viewing.
Alternatively you
OK
VOL
or
AV mode
by pressing
the
789
0
TV/AV button.
In AV mode, to return to TV mode, press the D / E
or
NUMBER but-
tons.
21
Other functions
Child lock
Setup
Language
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized view-
Input
Child lock
ing.
DEFG
OK
1.
MENU
Press the MENU button and then D / E button to select the
Setup
2.
3.
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off
on the Child lock menu.
Setup
Language
Input
Child lock
On
Off
TV/AV MULTIMEDIA
MENU
DEFG
4.
OK
VOL
PR
22
MENU
viewing.
With the lock on, the display Child lock appears on the screen if
any button on the side panel is pressed while viewing the TV.
PR
VOL
OK
Press the TV/AV button to return to normal TV
Note : The display Child lock will not appear on the screen if any
button on the side panel is pressed while displaying the menus.
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
Teletext is
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
PR
OK
PR
reappears.
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
123
Page
1.
2.
lowing page.
456
789
0
TEXT
colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
M button to switch to LIST mode.
Programming
a
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1. Press a coloured button.
2. Using the NUMBER buttons, select the page you wish to pro3.
4.
MODE
M
gramme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
23
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
PR
OK
FASTEXT
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
123
selection
i button to select the index page.
Press the
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
Page
456
1.
2.
789
3.
0
4.
lowing page.
INDEX
i
24
M
Teletext
Special
?
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
PR
UPDATE
Displays
the TV
picture
on
the
screen
while
waiting
for the
new
will appear at the top left hand
teletext page. The display
corner of the screen. When the updated page is available then
PR
will change to the page number.
Press this button to view the updated teletext page.
display
123
HOLD
Stops
the automatic page
change
which will
occur
if
a
tele-
456
text page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
stop symbol is displayed
at the
top left-hand
corner
789
of the
0
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
Displays
the teletext pages superimposed on the TV picture.
picture off press this button again.
To switch the TV
TIME
UPDATE
TIME
SIZE
MIX
HOLD
REVEAL
?
viewing TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
When
a
button
again
to remove the
display.
In the teletext mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED/GREEN, D / E
NUMBER buttons.
change
Press
again
or
to exit this function.
25
Connection of external
You
can
connect additional
etc. to your set.
Examples
equipment
equipment,
are
such
as
VCRs, camcorders
shown below.
Aerial socket
VCR
1.
Connect the RF out socket of the VCR to the aerial socket of
the set.
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
4.
VCR
stored.
5.
Press the PLAY button
on
the VCR.
Audio/Video in sockets
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
VCR
2.
3.
Press the TV/AV button to select AV1 (or
Press the PLAY button on the VCR.
The VCR
playback picture appears
on
AV2).
the
screen.
: If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Note
S-Video/Audio in sockets
(S-Video) (option)
S-VIDEO VCR
When
connecting
picture quality will
i
i
1.
an
S-VIDEO VCR to the S-VIDEO socket, the
be further
improved.
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
S-VIDEO VCR
3.
Select S-Video
4.
Press the PLAY button
The VCR
S-VIDEO VCR
26
by pressing
on
the TV/AV button
repeatedly.
the VCR.
playback picture appears
on
the
screen.
Connection of external
DVD
input
sockets
equipment
(option)
i
1.
Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y
or Y PB PR) of the DVD to the DVD/DTV IN sockets (Y PB PR) of
i
the set.
2.
Connect the audio cable from the DVD to DVD/DTV IN AUDIO
sockets of the set.
3.
Press the TV/AV
or
MULTIMEDIA button to select
DVD
Component
(or Component 2)
4.
Press the PLAY button
The DVD
on
the DVD.
playback picture appears
on
the
screen.
DTV in sockets
1.
Connect the SET TOP outputs to the DVD/DTV IN sockets
PB PR) of the set.
2.
Connect the audio cable from the SET TOP to the AUDIO sock-
(Y
DVD
ets of the set.
3.
Press the TV/AV
or
MULTIMEDIA button to select
Component
(or Component 1).
Headphone
Insert the
can
socket
(option)
DVD
headphone plug to the headphone socket of the set. You
through the headphone. To adjust the head-
listen to the sound
phone volume, press
the F / G button. If you press the MUTE but-
ton, the sound from the headphone is switched off.
Receriver
27
Connection of PC
PC in socket
1.
2.
3.
4.
PERSONAL COMPUTER
(option)
(option)
Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the PC input socket of the set.
Connect the audio cable from the PC to the PC SOUND sockets of the set.
Press the TV/AV or MULTIMEDIA button to select PC.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
Connect the signal cable (DVI-D cable, Not DVI to D-Sub
from the DVI output socket of the PC to the DVI input socket of the set when using a PC with DVI output.
In some video cards, DVI-Analogue output may not be supported.
Note
:
cable)
Displayable
MODE
VGA
SVGA
XGA
WXGA
Monitor
Specification
Resolution
Horizontal
Vertical
Frequency(KHz)
Frequency(Hz)
640x480
31.4KHz
60Hz
640x480
35KHz
67Hz
640x480
37.5KHz
75Hz
800x600
35.1KHz
56Hz
800x600
37.8KHz
60Hz
800x600
48KHz
72Hz
800x600
46.8KHz
75Hz
1024x768
48.3KHz
60Hz
1024x768
56.4KHz
70Hz
1024x768
60KHz
75Hz
1280x768
47.6KHz(option)
60Hz
(Synchronization input
form
:
separate)
Note :
a.
If the set is cold, there may be a small "flicker" when the set is
switched on. This is normal, there is nothing wrong with the set.
b. If possible, use the VESA 1,024x768@60Hz video mode to
obtain the best image quality for your LCD monitor. If used under
the other resolutions, some scaled or processed pictures may
appear on the screen. The set has been pre-adjusted to the
mode VESA 1,024x768@60Hz.
c.
Some dot defects may appear on the screen, like Red, Green or
Blue spots. However, this will have no impact or effect on the
monitor performance.
d. Do not press the LCD screen with your finger for a long time as
this may produce some temporary distortion effects on the
screen.
e.
When the PC screen appears on the set, a message may appear
the screen, and the message will differ according to the
Window system version (Win98, 2000). If a message appears
click "Next" until the message finishes.
If the message "out of Range" appears on the screen, adjust
the PC as in the 'Displayable Monitor Specification' section.
on
f.
DPM (Display Power Management) mode
When the PC is in the power saving mode, automatically the
itor goes into DPM mode to save the energy.
Note : Use the supplied
mode may not work.
28
signal
cable with the set.
mon-
Otherwise, DPM
Connection of PC
PC
(option)
PC
Setup (only DVI-Analoge mode) (option)
H-Position
V-Position
You
can adjust horizontal/vertical position, clock, phase,
configure, reset as you prefer.
and auto-
Clock
Phase
Auto
Configure
Reset
1.
Press the MENU button and then D / E button to select the
Setup
2.
3.
4.
DEFG
menu.
OK
MENU
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select PC.
Press the MENU button and then D / E button to select the PC
menu.
PC
87
H-Position
V-Position
Clock
Phase
Auto
TV/AV
Configure
Reset
MENU
DEFG
5.
OK
MENU
Press the G button and then D / E button to select the desired
item.
Press the F / G button to make appropriate adjustments.
picture
6.
H-Position / V-Position
This function is to adjust
PR
OK
VOL
picture
to
left/right
and
up/down
as
you
prefer.
VOL
PR
Clock
This function is to minimize any vertical bars or stripes visible on
the screen background. And the horizontal screen size will also
change.
Phase
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
Auto-configure
This function is for the automatic adjustment of the screen position, clock and phase. The displayed image will disappear for a
few seconds while the Auto-configuration is in progress.
Reset
This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed.
?
Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and phase manually.
7.
8.
Press the OK button to store it for the PC monitor
Press the TV/AV button to return to PC mode.
picture.
29
Note
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Incorrect
position
Vertical bars
or
stripes
on
background
Horizontal noise
Signal
Cable message appears
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Auto-configure
or
adjust
(VCR only)
the H/V
Auto-configure
or
adjust
Clock
Auto-configure
or
adjust
Phase
Is the
Signal
Cable connected
position
or
loose
31
Download PDF

advertising