advertisement
▼
Scroll to page 2
of 32
Colour Television OWNER'S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back mation to your dealer when you Model number : Serial number : P/NO : 3828VA0380A (MP02AB, 092S cover require TX) a and quote this infor- service. Contents Installation 3 Location and function of controls Remote control handset Battery installation Front panel / Side panel 4 Basic 7 operation Programme selection Volume adjustment / Quick view On and off / Mute function / Auto Demonstration On On screen language selection (option) 8 screen menus Menu selection up TV stations Auto programme tuning Manual programme tuning 9 Setting Fine tuning / Programme edit Favourite programme Calling the programme table Picture PSM 14 adjustment (Picture Status Memory) Picture adjustment / 3D comb filter Auto convergence / Turbo picture selection Sound adjustment (Sound Status Memory) SSM 17 / Sound adjustment Turbo sound selection / Sound output selection Stereo/Dual reception (option) Time reception / NICAM 20 setting Clock / Off time / On time Auto sleep Other functions TV and AV modes / Child lock Picture format / Sleep timer 22 PIP 24 operation (option) Input mode selection for sub picture Swapping between main and sub pictures Programme selection for sub picture Sub picture size / Sub picture freeze Sub picture position change / Programme scan On and off / Teletext (option) Switch on/off SIMPLE text / TOP text (option) FASTEXT / Special teletext functions 25 Connection of PC PC in socket / RGB-PC OUTPUT in socket RGB-PC mode (option) 28 Connection of external equipment Aerial socket Audio/Video in sockets S-video/Audio in sockets (S-AV) (option) Component in sockets DTV in sockets / Monitor out sockets 30 Troubleshooting 2 check list Back cover Installation Power This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms ial and mains or powercuts, please pull out the aer- plugs. Warning To prevent fire moisture. or shock hazard, do not expose the set to rain or Service Never remove the back high voltage properly, unplug it very cover of the set as this can expose you to and other hazards. If the set does not operate and call your dealer. Aerial Connect the aerial cable to the socket marked +75 Ω For the best cover. reception an on the back outdoor aerial should be used. Location Position your set so that no bright light or sunlight falls directly onto screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the the set is in a position to allow a free flow openings on the back cover. place the set on a sloping or unstable placed of air. Do not cover the ventilation Do not on the bottom of the set may cause it to move area as the casters and to be damaged. When displaying still pictures such as videogames, 16:9 picture format, PIP display, and station label for a long time, the image may be persisted on the screen. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. 3 Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set. Remote control handset POWER 1 I/II 2 TV/AV 11 TURBO SOUND Before you use the remote control handset, teries. See the next page. 1. PICTURE 12 3 PIP FPR 13 2. 4 PR- PR+ SWAP INPUT 5 MENU PR MUTE VOL OK 456 8 PSM 0 SSM POSITION SCAN STILL SLEEP LIST 15 SIZE 5. returns to the 17 6. 18 STOP 10 P/STILL PLAY language MENU selects FF pictures. previously viewed programme. a menu. Δ / Ε (Programme Up/Down) selects a programme or a menu item. switches the set on from standby. Φ / Γ (Volume Up/Down) adjusts the volume. adjusts OK menu settings. accepts your selection 8. 9. or NUMBER BUTTONS switches the set on from PSM (Picture Status recalls your preferred displays standby the current mode. or directly Memory) picture setting. 10. VCR BUTTONS control a LG video cassette recorder. 4 broadcast. REC 7. REW standby. SWAP 16 HD-DAC install the bat- SWAP alternates between main and sub picture. INPUT selects the input mode for the sub picture. SIZE adjusts the sub picture size. STILL freezes motion of the sub picture. POSITION relocates the sub picture in clockwise direction. SCAN switches on or off the programme scan mode 12 sub 123 9 I/II selects the language during dual selects the sound output. off to or PIP BUTTONS PIP switches the sub picture on or off. PR +/selects a programme for the sub picture. PR 9 standby 4. VOL 8 from TURBO SOUND BUTTON selects Turbo sound. 7 7 on 3. 14 6 POWER switches the set please select a number. Location and function of controls 11. TV/AV selects TV or AV mode. switches the set on from standby. 12. TURBO PICTURE BUTTON selects Turbo picture. POWER 1 13. FPR (Favourite Programme Review) selects stored favourite programmes. I/II 2 TV/AV SOUND 14. MUTE PICTURE 12 3 switches the sound on or off. PIP FPR 13 4 PR- 15. SSM (Sound Status Memory) recalls your preferred sound setting. 11 TURBO PR+ SWAP INPUT 5 16. LIST MENU displays 17. SLEEP sets the sleep PR MUTE 14 6 the programme table. timer. VOL OK VOL 7 18. HD-DAC adjusts the colour convergence of receiving the signals. screen automatically during Note : In teletext mode, the PR +/-, SWAP and INPUT buttons used for teletext function. Battery PR are installation 1 2 3 4 5 6 7 8 9 PSM 0 SSM POSITION SCAN STILL SLEEP LIST 8 The remote control handset is powered by two AAA type batteries. To load the batteries, turn the remote control handset over and 9 open the battery compartment. Install two batteries as indicated by the polarity symbols ( + and ) marked inside the compartment. 15 - SIZE 16 HD-DAC 17 18 STOP 10 REW P/STILL PLAY REC FF Note : To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time. 5 Location and function of controls Front ? panel RT-44/49/54NA12 series 2 TV/AV TV/AV 1 MENU OK VOL MENU OK VOL PR PR POWR 3456 7 8 S-VIDEOL/MN 10 AUDIO R AV3 ? RT-44/49/54NA62 series (Side panel) 2 TV/AV TV/AVMENU 1 OK MUTE VOL MAIN POWER switches the set TV/AV selects TV or AV mode. switches the set on from standby. 9. OK or displays the current mode. 7. POWER/STANDBY INDICATOR illuminates brightly when the set is in mode. 8 Φ / Γ (Volume Up/Down) adjusts the volume. adjusts menu settings. Δ / Ε (Programme Up/Down) standby (Light Emitting Diode) DISPLAY displays the selected input signals. Option : Only RT-44/49/54NA62 series, : PAL/SECAM input signal indicator : STEREO sound indicator : SLEEP timer indicator : CHILD LOCK setting indicator : NTSC, DTV or PC input signal indicator MUTE switches the sound on or off. 10. AUDIO/VIDEO IN SOCKETS (AV3) Connect the audio/video out sockets of external equipment to these sockets. S-VIDEO/AUDIO IN SOCKETS (S-AV) Connect the video out socket of an S-VIDEO VCR to the S-VIDEO socket. Connect the audio out sockets of the SVIDEO VCR to the audio sockets as in AV3. LED PAL gressive STEREO SLEEP LOCK 6 PR selects a programme or a menu item. switches the set on from standby. a menu. accepts your selection 6. VOL 3549 off. 3. MENU selects 6 8. on or REMOTE CONTROL SENSOR 5. MUTE PR 2. 4. MENU ON/OFF 7 1. OK * CASTERS (on the bottom) turn and move the set easily. Basic operation On and off 1. 2. 3. 4. Press the main power button to switch the set on. If the set is in standby mode, press the POWER, Δ / Ε, TV/AV or NUMBER buttons on the remote control handset to switch it on fully. Press the POWER button on the remote control handset. The set reverts to standby mode. Press the main power button again to switch the set off. Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains plug is replaced in the mains power socket. Programme selection You can select buttons. a Volume programme number with the Δ / Ε or NUMBER adjustment Press the Φ / Γ button to adjust the volume. Quick view Press the SWAP button to view the last programme you were watching. Mute function Press the MUTE button. The sound is switched off and the W appears. You can cancel it SOUND button. by pressing the MUTE, Φ display / Γ, I/II, TURBO Auto Demonstration To review all the menus programmed in the set, press the OK button of the front panel control for about 10 seconds. To stop auto demonstration, press any button of the front panel control and POWER button of the remote control. On screen language selection The menu can be displayed First select your language. 1. 2. 3. on the (option) screen in desired language. Press the MENU button and then Δ / Ε button to select the Special menu. Press the Γ button and then Δ / Ε button to select Language. Press the Γ button and then Δ / Ε button to select your desired language. 4. All the on screen displays will appear in the selected language. Press the OK or Φ button to select the Special menu. Repeatedly press the MENU button to return to normal TV viewing. 7 On screen menus The an dialogue operator also between you and your set takes place on screen with The buttons required for the operating steps are menu. displayed. Menu selection 1. Press the MENU button and then Δ / Ε button to display each menu. 3. Press the Γ button and then Δ / Ε button to select a menu item. Press the Γ button to display the sub menu or the pull-down 4. Change 2. menu. the setting of an Φ/ΓorΔ/Ε. item in the sub or pull-down menu with can move to the higher level menu with OK or Φ button and to move to the lower level menu press the Γ button You Note : In AV modes, if you adjust the Station menu, AV modes return a. to the TV mode. b. In the teletext mode, menus are not displayed. In some models, the Language will not display. c. Station Picture Auto programme Manual programme Programme edit Favourite programme PSM Γ Contrast Γ Γ Brightness Γ Γ Colour Γ Sharpness Γ 3D comb filter Γ Auto convergence Γ Γ Γ ΔΕOΦ ΓOOKOMENU ΔΕOΦ ΓOOKOMENU Station Picture menu menu Sound SSM Γ AVL Γ Balance Γ ΔΕOΦ ΓOOKOMENU Sound Time Special Input Language Γ Clock Γ Γ Off time Γ Child lock Γ On time Γ Γ Auto Γ Screen ΔΕOΦ ΓOOKOMENU Special 8 menu menu sleep ΔΕOΦ ΓOOKOMENU Time menu Setting up TV stations Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the Δ / Ε or NUMBER buttons to scan the stations you programmed. Stations can be tuned using automatic or manual modes. Note : In some models up to 200 TV stations Auto programme can Station Auto programme Manual programme Programme edit Favourite programme Γ Γ Γ Γ be stored. ΔΕOΦ ΓOOKOMENU tuning All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. 1. 2. Press the MENU button and then Δ / Ε button to select the Station menu. Press the Γ button and then Δ / Ε button to select Auto pro- gramme. Auto programme System Storage Γ from Start Γ BGI Γ DK M ΔΕOΦ ΓOOKOMENU 3. 4. 5. 6. 7. 8. 9. Press the Γ button to display the Auto programme menu. Press the Γ button. Select a TV system with the Δ / Ε button on the System pull-down menu; BG : (Asia/New Zealand/M.East/Africa/Australia) I : (Hong Kong/South Africa) DK : (East Europe/China/Africa/CIS) M : (USA/Korea/Philippines) (option) Press the OK or Φ button. Press the Δ / Ε button to select Storage from. Press the Γ button. Select the beginning programme number with the Φ / Γ button or NUMBER buttons on the Storage from pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5. Press the OK button. Press the Δ / Ε button to select Start. Auto programme System Storage Start Γ from Γ Γ -----(BG) 7 45% MENU 10. Press the Γ button to begin auto programming. All receivable stations are stored. To stop auto programming, press the MENU button. When auto programming is completed, the Programme edit menu appears on the screen. See the 'Programme edit' section to edit the stored programme. 11. Repeatedly press the MENU button to return to normal TV viewing. 9 Setting up Station Manual programme Auto programme Manual programme Programme TV stations edit Favourite programme Γ Γ Γ Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. 1. ΔΕOΦ ΓOOKOMENU tuning Γ 2. 3. Press the MENU button and then Δ / Ε button to select the Station menu. Press the Γ button and then Δ / Ε button to select Manual programme. Press the Γ button to display the Manual programme menu. Manual programme Storage System Γ Channel Γ 5 Γ Fine Γ Search Γ Name Γ Booster Γ ΔΕOΦ ΓOOKOMENU 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Press the Δ / Ε button to select Storage. Press the Γ button to select the programme number. Select the desired programme number (0 to 99) with the Φ / Γ button or NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5. Press the OK button. Press the Δ / Ε button to select System. Press the Γ button. Select a TV system with the Δ / Ε button on the System pull-down menu; BG : (Asia/New Zealand/M.East/Africa/Australia) I : (Hong Kong/South Africa) DK : (East Europe/China/Africa/CIS) M : (USA/Korea/Philippines) (option) Press the OK or Φ button. Press the Δ / Ε button to select Channel. Press the Γ button. Press the Δ / Ε button to select V/UHF or Cable on the Channel pull-down menu. If possible, select the channel number directly with the number buttons. Any number under 10 is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5. Press the OK or Φ button Press the Δ / Ε button to select Search. Press the Γ button. Press the Φ / Γ button to commence searching on the Search pull-down menu. If a station is found the search will stop. Press the OK button to store it. The display Stored will appear. Manual programme Storage System Γ Channel Γ Fine Γ Search Γ Name Γ Booster Γ Γ ΓΓΓ Stored 16. To store another station, repeat steps 4 to 15. 17. Repeatedly press the MENU button to return to normal TV viewing. 10 TV stations Setting up Assigning a station name 1. Repeat the 'Manual programme tuning' steps 2. 3. 4. 5. 6. 7. Station 1 to 3. Press the Δ / Ε button to select Name. Press the Γ button on the Name pull-down menu. Press the Δ button. You can use a blank, +, -, the numeric 0 e to 9 and the alphabet A to Z. With the Ε button you can select in the opposite direction. Select the position by pressing the Φ / Γ button and then take your choice of the second character, and so on. Press the OK button. Repeatedly press the MENU button to return to normal TV Auto programme Manual programme Programme edit Favourite programme Γ Γ Γ Γ ΔΕOΦ ΓOOKOMENU viewing. Booster In some models, Booster is an optional function. Booster can perform this function. Only a set with If the reception is poor at the fringe area of TV signal, select Booster to On. When the picture condition is good, do not select Booster to On. 1. 2. 3. 4. the 'Manual programme tuning' steps 1 to 3. Press the Δ / Ε button to select Booster. Press the Γ button. Press the Δ / Ε button to select On or Off on the Booster Repeat pull-down 5. 6. Repeatedly viewing. Fine or Φ button. the MENU button to return to normal TV press tuning Normally 1. 2. 3. menu. Press the OK fine tuning is only necessary if reception is poor. the 'Manual programme tuning' steps 1 to 3. Press the Δ / Ε button to select Fine. Press the Γ button. Repeat Manual programme Storage System Γ Channel Γ Fine Γ Search Γ Name Γ Booster Γ Γ ΓΓΓ Φ ΓOOKOMENU 4. 5. 6. Press the Φ / Γ button to fine tune for the best picture and sound on the Fine pull-down menu. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. The finely tuned programme will during programme selection. be indicated by yellow number 11 Setting up Station Auto programme Manual programme Programme edit Favourite programme Programme edit Γ Γ Γ Γ This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1. ΔΕOΦ ΓOOKOMENU TV stations 2. 3. Press the MENU button and then Δ / Ε button to select the Station menu. Press the Γ button and then Δ / Ε button to select Programme edit. Press the Γ button to display the Programme edit menu. Programme 0 1 2 3 4 edit 5C05 ----- 6 ----- 7 ----- 8 ----- 9 ----- Delete ----- ----- ----- ----- Copy Skip Move ΔΕΦ ΓOOKOMENU Deleting 1. 2. a programme Select a programme to be deleted with the Δ / Ε or Φ / Γ button. Press the RED button twice. The selected programme is deleted, all the following programmes are shifted up one position. Copying 1. 2. a programme Select a programme to be copied with the Δ / Ε Press the GREEN button. All the following programmes are shifted down or Φ one / Γ button. position. Moving 1. 2. 3. a programme Select a programme to be moved with the Δ / Ε or Φ / Γ button. Press the YELLOW button. Move the programme to the desired programme number with theΔ/ΕorΦ/Γbutton. 4. Press the YELLOW button Programme 0 1 2 3 4 again to release this function. edit ----- ----- ----- ----- ----- 5C05 6 7 8 9 ----- ----- ----- ----- Move Off ΔΕΦ ΓOMENU a programme number Select a programme number to be skipped with the Δ / Ε or Φ / Γ button. Press the BLUE button. The skipped programme turns to blue. Press the BLUE button again to release the skipped pro- Skipping 1. 2. 3. gramme. When a programme number is skipped it means that you will be unable to select it using the Δ / Ε button during normal TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu. Repeatedly press 12 the MENU button to return to normal TV viewing. Setting up TV stations Station Favourite programme This function lets you select your favourite programmes 1. 2. Press the MENU button and then Δ / Ε button to select the Station menu. Press the Γ button and then Δ / Ε button to select Favourite programme. 3. directly. Press the Γ button to display Programme edit Favourite programme Γ Γ Γ Γ the Favourite programme ΔΕOΦ ΓOOKOMENU Favourite programme Auto programme Manual programme Programme Auto programme Manual programme Γ Γ edit Γ Favourite programme Γ --- ----- --- ----- --- ----- --- ----- --- ----- Φ Γ 0-9 ΔΕOOKOMENU menu. 4. 5. 6. 7. 8. Press the Δ / Ε button to select -----. Select a desired programme with the Φ / Γ button or NUMBER buttons. Any number under 10 is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5. To store another programme, repeat steps 4 to 5. You can store up to 5 programmes. Press the OK button. Repeatedly press the MENU button to return to normal TV -- viewing. Repeatedly press the FPR button to select stored favourite pro- grammes. Calling the programme table You can check the programmes stored in the memory the programme table. by displaying programme table Press the LIST button to display the Programme table menu. The programme table appears on the screen. One programme Displaying Station 0 1 2 3 4 ----- ----- ----- ----- ----- 5C05 6 7 8 9 ----- ----- ----- ----- ΔΕΦΓOOKOMENU table contains ten programmes as below. Note : a. You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode. b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned. a programme in the programme table Select a programme with the Δ / Ε or Φ / Γ button. Then press the OK button. The set switches to the chosen programme number. Selecting Paging through a programme table are 10 (or 20) programme table pages in which contain 100 (or 200) programmes. Pressing the Δ / Ε or Φ / Γ button repeatedly turns the pages. There Repeatedly press the MENU button to return to normal TV viewing. 13 Picture Picture PSM PSM Γ Contrast Γ Brightness Γ Colour Γ Sharpness Γ 3D comb filter Γ Auto convergence Γ 1. 2. 3. adjustment (Picture Status Memory) Press the MENU button and then Δ / Ε button to select the Picture menu. Press the Γ button and then Δ / Ε button to select PSM. Press the Γ button and then Δ / Ε button to select a picture setting on the PSM pull-down menu. Picture ΔΕOΦ ΓOOKOMENU PSM Γ Dynamic Contrast Γ Standard Brightness Γ Mild Colour Γ Game Sharpness Γ User 3D comb filter Γ Auto convergence Γ ΔΕOΦOOKOMENU 4. 5. Press the OK Repeatedly viewing. You or Φ button. press the MENU button to return to normal TV also recall a desired picture (Dynamic, Standard, User) with PSM button on the remote control. The picture Dynamic, Standard, Mild and Game are programmed for good picture reproduction at the factory and cannot be changed. can Mild, Game Picture You can ness 1. 2. or adjustment adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer. and tint Press the MENU button and then Δ / Ε button to select the Picture menu. Press the Γ button and then Δ / Ε button to select the desired picture item. Picture PSM Contrast Γ Γ Brightness Γ Colour Γ Sharpness Γ 3D comb filter Γ Auto convergence Γ 100 ΔΕOΦ ΓOOKOMENU 3. 4. Press the Γ button. Press the Φ / Γ button to make appropriate adjustments each sub menu. You can also select other Picture items directly Contrast on the with Δ / Ε but85 Φ Γ ΔΕOOKOMENU adjust them with Φ / Γ button. Press the OK button to store it for the picture. Repeatedly press the MENU button to return to normal TV ton and 5. 6. viewing. Note 14 : Only Contrast and Brightness are displayed in PC mode. Picture 3D comb filter (TV and AV mode adjustment Picture only) This function lets you to adjust the colours of the ing receiving the signals. screen clearly dur- 1. Press the MENU button and then Δ / Ε button to select the Picture menu. 2. Press the Γ button and then Δ / Ε button to select 3D comb PSM Γ Contrast Γ Brightness Γ Colour Γ Sharpness Γ 3D comb filter Γ Auto convergence Γ ΔΕOΦ ΓOOKOMENU filter. 3. Press the Γ button and then Δ / Ε button to select Auto on the 3D comb filter pull-down menu. or Off Picture PSM Γ Contrast Γ Brightness Γ Colour Γ Sharpness Γ 3D comb filter Γ Auto Auto convergence Γ Off ΔΕOΦOOKOMENU or Φ 4. Press the OK 5. Repeatedly press viewing. Note a. the MENU button to return to normal TV : The 3D comb filter isn't suitable to casting signal b. button. and 1/2 main If you select Auto screen picture use in case of no broad- mode. the 3D comb filter pull-down menu, the of the set might be unstable for the nonce. on 15 Picture Picture adjustment Auto convergence PSM Γ Contrast Γ Brightness Γ This function enables you to Colour Γ screen Sharpness Γ 3D comb filter Γ Auto convergence Γ ΔΕOΦ ΓOOKOMENU adjust the colour convergence of automatically during receiving the signals. When the set is first installed or it is relocated, the picture may be unstable with three colour ghosts (red, green, blue). This problem can be solved by adjusting the colour convergence. 1. 2. Press the MENU button and then Δ / Ε button to select the Picture menu. Press the Γ button and then Δ / Ε button to select Auto con- vergence. Auto convergence Position Checking DATA 3. Press the Γ button to : adjust 52 the colour convergence Note : a. The Auto convergence isn't suitable to b. c. use in automatically. case of no broad- casting signal. The Auto convergence function will be operated about 40 seconds. The colour of operating point will be changed in order of 'blue- green-red'. d. e. f. Make the surrounding illumination dark when the screen is unstable or the message "The End" and "Ensure lights are dimmed sufficiently" are displayed on screen after operating Auto convergence. The Auto convergence will then have to be operated again. This function will be operated after about 20 minutes from switching the set on. Adjust the Auto convergence according to a broadcasting system (50Hz or 60Hz) each. You can also adjust Auto convergence with HD-DAC button on the remote control. Press the HD-DAC button and then Γ button to begin the colour convergence automatically. Turbo picture selection When this function is on, picture will be more brilliant and distinct picture than normal picture. You can enjoy the Turbo picture so much better than normal picture. Repeatedly press the TURBO PICTURE button to switch on or off. (Turbo Picture off) 16 (Turbo Picture on) Sound SSM You adjustment Sound (Sound Status Memory) select your preferred sound setting; Dolby Virtual, Flat, Music, Speech, or Movie and you can also adjust the sound frequency of equalizer. 1. 2. 3. can Press the MENU button and then Δ / Ε button to select the Sound menu. Press the Γ button and then Δ / Ε button to select SSM. Press the Γ button and then Δ / Ε button to select a sound setting on the SSM pull-down menu. SSM Γ AVL Γ Balance Γ ΔΕOΦ ΓOOKOMENU Sound SSM Γ Dolby AVL Γ Flat Balance Γ Music Virtual Speech Movie User Γ ΔΕOΦOOKOMENU Dolby Virtual Dolby Virtual lets you experience panoramic Sound Frequency Adjustment a. Press the Γ button in User to display 0.1 0.5 effects of sound. the User sub 1.5 5.0 menu. 10KHz ΔΕOΦ ΓOOKOMENU b. Select a sound band by pressing the Φ / Γ button. c. Make appropriate sound level with the Δ / Ε button. d. Press the OK button to store it for the sound User. Repeatedly press the MENU button to return to normal TV viewing. You can also recall a desired sound (Dolby Virtual, Flat, Music, Speech, Movie or User) with SSM button on the remote control. The sound Dolby Virtual, Flat, Music, Speech and Movie are programmed for optimum sound reproduction at the factory and cannot be changed. If you press the SSM button after making appropriate adjustthe User sub menu, the display User automatically appears even though you have already set a factory preset setting; Dolby Virtual, Flat, Music, Speech, or Movie. Note : ment on 17 Sound Sound Sound SSM Γ AVL Γ Balance Γ You adjustment adjustment adjust matically keeps can balance on an or AVL equal (Auto Volume Leveler). AVL autovolume level even if you change pro- grammes. 1. ΔΕOΦ ΓOOKOMENU 2. 3. Press the MENU button and then Δ / Ε button to select the Sound menu. Press the Γ button and then Δ / Ε button to select the desired sound item; Balance or AVL. Make desired adjustment with the Φ / Γ, Δ / Ε or OK button on each pull-down menu. Sound SSM Γ AVL Γ Balance ΓOn Off ΔΕOΦOOKOMENU 4. Repeatedly press viewing. the MENU button to return to normal TV Turbo sound selection When this function is on, sound will be more emphasized and amplified sound than normal sound. You can enjoy the Turbo Sound so much better than normal Sound. Repeatedly press the TURBO SOUND button to switch on or off. MEGA TURBO (Turbo Sound off) Note 18 : The Turbo Sound isn't suitable to (Turbo Sound on) use Dolby Virtual. Sound adjustment Sound output selection In AV mode, you can select output sound for the left and right loud- speakers. Repeatedly press the I/II button to select the sound output. : Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loudspeaker. L+L : Audio signal from audio L input is sent to left and right loudspeakers. R+R : Audio signal from audio R input is sent to left and right loudspeakers. L+R Stereo/Dual reception When a programme is selected, the sound information for the station appears after the programme number and station name disappear. Broadcast On Screen Mono MONO Stereo STEREO Dual DUAL I Display Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II button twice again. selection for dual language broadcast If a programme received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly. DUAL I sends the primary broadcast language to the loudspeakers. DUAL II sends the secondary broadcast language to the loud- Language speakers. DUAL I+II sends NICAM a separate language to each loudspeaker. reception (option) If your set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly. 1. 2. 3. When NICAM mono is received, you can select NICAM MONO or FM MONO. When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono. When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or MONO. When FM mono is selected the display MONO appears on the screen. 19 Time Time setting Clock Clock Γ Off time Γ On time Γ Auto Γ sleep 1. 2. 3. Press the MENU button and then Δ / Ε button to select the Time menu. Press the Γ button and then Δ / Ε button to select Clock. Press the Γ button and then Δ / Ε button to adjust hour. Time ΔΕOΦ ΓOOKOMENU Clock Γ Off time Γ On time Γ Auto Γ sleep 01 :06 AM ΔΕOΦOOKOMENU 4. 5. 6. Press the Γ button and then Δ / Ε button to adjust minute. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. Off time By using this function in On mode, the set automatically switches off at a preset time. You must set the time correctly before using off time function. 1. 2. 3. Press the MENU button and then Δ / Ε button to select the Time menu. Press the Γ button and then Δ / Ε button to select Off time. Press the Γ button and then Δ / Ε button to adjust hour. Time Clock Γ Off time Γ 07 :00 AM On time Γ Off Auto Γ sleep ΔΕOΦ ΓOOKOMENU 4. 5. 6. Press the Γ button and then Δ / Ε button to adjust minute. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. 20 Time setting Time On time this function in On mode, the set automatically switches on at a preset time with desired program number and volume. You must set the time correctly before using on time function. By using 1. 2. 3. Press the MENU button and then Δ / Ε button to select the Time menu. Press the Γ button and then Δ / Ε button to select On time. Press the Γ button and then Δ / Ε button to adjust hour. Clock Γ Off time Γ On time Γ Auto Γ sleep ΔΕOΦ ΓOOKOMENU Time Clock Γ Off time Γ On time Γ 01 :00 AM Auto Γ Pr. sleep Vol. 3 30 On ΔΕOΦ ΓOOKOMENU 4. 5. 6. 7. 8. Press Press Press Press the the the the Γ button and then Δ / Ε button to Γ button and then Δ / Ε button to Γ button and then Δ / Ε button to adjust adjust adjust minute. Pr.. Vol.. OK button. the MENU button to return to normal TV Repeatedly press viewing. Auto sleep If you select On on the Auto sleep pull-down menu, the set will switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. automatically 1. 2. 3. Press the MENU button and then Δ / Ε button to select the Time menu. Press the Γ button and then Δ / Ε button to select Auto sleep. Press the Γ button and then Δ / Ε button to select On or Off on the Auto sleep pull-down menu. Time Clock Γ Off time Γ On time Γ Auto ΓOn sleep Off ΔΕOΦOOKOMENU 4. Repeatedly press viewing. the MENU button to return to normal TV Note : a. This functions work only in standby mode. b. If you adjust hour or minute on the on/off time menu, automatically on/off time is changed to On. c. To cancel the set's on/off time, set the on/off time to Off. d. To view the remaining on/off time, select the Time menu. e. When you switch the main power off, the Clock is reset. 21 Other functions Special TV and AV modes Input Language Γ Child lock Γ Screen Γ Γ Inputs can be set for TV cassette recorder or (VCR), AV mode. AV mode is used when or other equipment a video is connected to the set. Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section. ΔΕOΦ ΓOOKOMENU 1. Press the MENU button and then Δ / Ε button to select the Special 2. 3. menu. Press the Γ button and then Δ / Ε button to select Input. Press the Γ button and then Δ / Ε button to select TV, AV1, AV2, AV3, COMPONENT1, COMPONENT2, RGB-DTV or RGB-PC on the Input pull-down menu. Special Input Language Γ TV Γ AV1 Child lock Γ AV2 Screen Γ AV3 COMPONENT1 COMPONENT2 RGB-DTV RGB-PC ΔΕOΦOOKOMENU 4. VCR connected to the AV1 sockets on the set VCR connected to the AV2 sockets on the set AV 3 : VCR connected to the AV3 sockets on the set COMPONENT 1 : DVD connected to the COMPONENT 1 sockets on the back COMPONENT 2 : DVD or HD-SET TOP connected to the COMPONENT 2 sockets on the back RGB-DTV : HD-SET TOP connected to the RGB-DTV INPUT sockets on the back RGB-PC : PC connected to the PC INPUT sockets on the back Repeatedly press the MENU button to return to normal TV AV 1 : AV 2 : viewing. Alternatively you can select the TV or AV mode by pressing the TV/AV button. In AV modes, to return to TV mode, press the Δ / Ε 22 or NUMBER buttons. Other functions Special Child lock The TV can be set so that the remote control handset is needed to control it. This feature can be used to prevent unauthorized view- ing. 1. Press the MENU button and then Δ / Ε Special 2. 3. 4. Input Language Γ Child lock Γ Screen Γ Γ button to select the menu. Press the Γ button and then Δ / Ε button to select Child lock. Press the Γ button and then Δ / Ε button to select On or Off on the Child lock pull-down menu. Repeatedly press the MENU button to return to normal TV ΔΕOΦ ΓOOKOMENU viewing. With the lock on, the display Child lock on appears on the screen if any button on the front panel is pressed while viewing the TV. : The any button Note display on Child lock on will not appear on the screen if front panel is pressed while displaying the the menus. Picture format modes) You 1. 2. 3. can (only COMPONENT2 watch TV in various picture formats; Press the MENU button and then Δ / Ε Special 4:3 or or RGB-DTV 16:9 (Wide). button to select the menu. Press the Γ button and then Δ / Ε button to select Screen. Press the Γ button and then Δ / Ε button to select ARC. Screen ARC Γ 4:3 H-Position Γ 16:9 V-Position Γ Clock Γ Clock Phase Γ Auto Γ configure Reset Γ Φ ΓOOKOMENU 4. Press the Γ button and then Δ / Ε button to select 4:3 the Screen pull-down menu. 4:3 This picture format is 4 to 3 of general TV. or 16:9 on 16:9 You can enjoy the cinema (the picture format of 16:9) or general TV programme through the 16:9 mode. The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full. : When you watch the TV on 16:9 mode, the screen will every 2 hours to avoid a permanent image on the screen. Note Sleep move timer You don't have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time elapses. Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90, play 120, 180 and 240. The timer begins to count down from the number of minutes selected. --- Note : a. To view the remaining sleep time, press the SLEEP button once. b. To cancel the sleep time, repeatedly press the SLEEP button until the display appears. c. When you switch the set off, the set releases the preset sleep time. --- 23 PIP operation (option) Option PIP is : an optional function, so that the set with PIP function only can operate. PIP (Picture in Picture) displays a within picture a picture. On and off Press the PIP button to switch on the sub press this button again to switch it off. Input mode selection for sub Press the INPUT button to select the picture input Each time this button is pressed, each ture is displayed as shown below. Programme number mode for the sub input Press the SWAP button to Programme pic- AV2 between main and sub Note : When the main available. picture. mode for the sub AV1 AV3 Swapping picture. exchange picture is TV pictures. AV modes, the swapping or selection for sub pictures the main and sub is picture Press the PR +/- buttons to select a programme for the sub picture. The selected programme number is displayed just below the programme number of main picture. Sub picture size Repeatedly press the SIZE button to select the desired sub size. The sub picture appears as below. 1/9 size of the main picture 1/2 size picture (option) Note : a. When the sub b. picture size is 1/2 of the main picture, the picture quality might get poor. 1/2 size of the main picture is able to work in TV or AV modes for main picture. Sub picture freeze Press the STILL button to freeze motion of the sub Press this button again to restore motion. Sub picture. picture position change Press the POSITION button repeatedly until desired achieved. The sub pictures move clockwise. Programme position is scan This function enables you to search all the stored stations on 12 sub pictures and see your favourite station by exchanging the main and sub pictures. Press the SCAN button to select 12 sub pictures. The selected sub pictures search all the stored stations Press the SCAN button again to switch off sub pictures. 24 . Teletext (option) Teletext (or TOP text) is an optional function, therefore only with the teletext system can receive the teletext broadcast. a set free service broadcast by most TV stations which gives information on news, weather, television programmes, share prices and many other topics. Teletext is a up-to-the-minute The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information. Switch on/off Press the TEXT button to switch to teletext. The initial page or last page appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TEXT button to switch off teletext. The previous mode reappears. SIMPLE text selection Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number. The Δ / Ε button can be used to select the preceding or fol- Page 1. 2. lowing page. a colour button in LIST mode If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the M button to switch to LIST mode. Programming Four teletext page numbers of your choice can be colour coded and selected by pressing the corresponding coloured button on easily the remote control handset. 1. Press a 2. Using the NUMBER buttons, select the page you wish to pro- 3. gramme. Press the OK button. Then the selected page is stored as the selected page number with blinking once. From now on, you 4. coloured button. can select this page with the same coloured button. The three other coloured buttons are programmed in this way. 25 Teletext TOP text (option) (option) The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. Block / group / page selection 1. With the blue button you can progress from block to block. 2. Use the yellow button to proceed to the next group with automatic overflow to the next block. 3. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the Δ button can be used. 4. The red button permits to return to previous selection. Alternatively the Ε button can be used. Direct page selection Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode. FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. selection i Press the button to select the index page. You can select the pages which are colour coded along the bottom line with the same coloured buttons. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. The Δ / Ε button can be used to select the preceding or fol- Page 1. 2. 3. 4. lowing page. 26 Teletext Special (option) teletext functions REVEAL Press this button to display concealed information, such as puzzles. again to remove the information from the solutions of riddles Press this button or display. SIZE Selects double height text. enlarge the top button again to enlarge Press this button to Press this page. Press this button again half of the page. the bottom half of the to return to the normal display. UPDATE Displays the TV picture on the screen teletext page. The display corner of the screen. When the will display change while waiting for the new will appear at the top left hand updated page is available then to the page number. Press this button to view the updated teletext page. HOLD Stops the automatic page change which will occur if a tele- text page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the top left-hand corner of the and the automatic page change is inhibited. To continue press this button again. screen MIX Displays the teletext pages superimposed on the TV pic- ture. To switch the TV picture off press this button again. TIME viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, When press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or the sub page, press the RED / GREEN, Δ / Ε NUMBER buttons. change Press again or to exit this function. 27 Connection of PC PC in socket (R)-AUDIO-(L) 1. VIDEO OUT S-VIDEO AV2 AUDIO PC SOUND () AV1 (L) (L) (R) (R) Y AUDIO RGB-PC OUTPUT Y MONO VIDEO ANT IN PB PB PR L L75Ω VIDEO RGB-DTV/PC INPUT 2. PR COMPONENT1 COMPONENT2 (480i/576i) (480p/720p/1080i) DVD/DTV INPUT RGB-DTV INPUT(480p/720p/1080i) RGB-PC INPUT(VGA/SVGA/XGA/SXGA) 3. 4. PERSONAL COMPUTER (R)-AUDIO-(L) Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the PC input socket of the set. Connect the audio cable from the PC to the AV2 (PC SOUND) sockets of the set. Press the TV/AV button to select RGB-PC. Switch on the PC, and the PC screen appears on the set. The set can be operated as the PC monitor. Note : a. Connect PC to the PC input sockets of the set after changing the resolution of PC. b. If you want to watch the PC monitor only, switch off the set with the POWER button on the remote control handset. (If you switch off the set with the ON/OFF button on the set, the screen of the PC isn't displayed.) VIDEO OUT S-VIDEO AUDIO AV2 PC SOUND () AV1 (L) (L) (R) (R) Y Y PB PB AUDIO RGB-PC OUTPUT RGB-PC OUTPUT in socket MONO RGB-DTV PC INPUT VIDEO ANT IN L L75Ω PR VIDEO PR COMPONENT1 COMPONENT2 (480i/576i) (480p/720p/1080i) DVD/DTV INPUT RGB-DTV INPUT(480p/720p/1080i) RGB-PC INPUT(VGA/SVGA/XGA/SXGA) You can watch the RGB in other monitor (PC) signal RGB-PC OUTPUT to other monitor's PC by connecting input jack. Note : When you watch the set by connecting RGB-PC OUTPUT to other monitor, only the screen of other monitor is displayed. PERSONAL COMPUTER Displayable MODE Monitor Specification Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x400 31.5 70 640x480 31.5 60 640x480 37.5 75 640x480 43.3 85 800x600 37.9 60 800x600 46.9 75 800x600 53.7 85 VGA SVGA XGA SXGA 832x624 49.4 74.55 1024x768 48.4 60 1024x768 56.5 75 1024x768 60.0 85 1152x864 67.5 75 1280x1024 64.0 60 (Synchronization input 28 form : separate) Connection of PC RGB-PC Mode 1. 2. 3. Special (option) Press the MENU button and then Δ / Ε button to select the Special menu. Input Language Γ Child lock Γ Screen Γ Γ Press the Γ button and then Δ / Ε button to select Screen. Press the Γ button and then Δ / Ε button to select the desired picture item. Screen ΔΕOΦ ΓOOKOMENU ARC H-Position Γ V-Position Γ Clock Γ Clock Γ Auto Γ phase configure Reset Γ 0 Γ ΔΕOΦ ΓOOKOMENU 4. Press the Φ / Γ button to make appropriate adjustments. Horizontal Position / Vertical Position This function is to adjust picture to left/right and up/down as you prefer. Clock This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. Clock phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters. Auto configure This function is for the automatic adjustment of the screen position, clock and clock phase. The displayed image will disappear for a few seconds while the Auto-configuration is in process. Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and clock phase manually. Reset This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed. 5. 6. Press the OK button to store it for the PC monitor picture. Repeatedly press the MENU button to return to normal TV viewing. 29 Connection of external You (R)-AUDIO-(L) can connect additional equipment equipment, such as VCRs, camcorders etc. to your set. VIDEO OUT S-VIDEO AUDIO AV2 PC () SOUND (L) (L) (R) (R) AV1 Y Y PB PB RGB-PC OUTPUT AUDIO Here shown may be somewhat different from your set. MONO RGB-DTV/PC INPUT VIDEO ANT IN PR VIDEO PR LL75Ω COMPONENT1 COMPONENT2 (480i/576i) (480p/720p/1080i) RGB-DTV INPUT(480p/720p/1080i) DVD/DTV INPUT RGB-PC INPUT(VGA/SVGA/XGA/SXGA) Aerial socket 1. VCR (R)-AUDIO-(L) Connect the RF out socket of the VCR to the aerial socket on the back of the set. VIDEO S-VIDEO AUDIO AV2 PC SOUND AV1 (L) (L) (R) (R) Y Y Connect the aerial cable to the RF aerial in socket of the VCR. 3. Store the VCR channel on a desired programme number using the 'Manual programme tuning' section. Select the programme number where the VCR channel is 4. OUT () 2. RGB-PC OUTPUT AUDIO stored. MONO RGB-DTV/PC INPUT VIDEO ANT IN PB PB PR LL 75Ω VIDEO PR COMPONENT1 COMPONENT2 (480i/576i) (480p/720p/1080) RGB-DTV INPUT(480p/720p/1080i) RGB-PC INPUT(VGA/SVGA/XGA/SXGA) DVD/DTVINPUT 5. Press the PLAY button on the VCR. Audio/Video in/out sockets VCR 1. Connect the audio/video out sockets of the VCR to audio/video in sockets of the set and in sockets of the VCR to out sockets of the set. 2. S-VIDEOL/MN 3. Press the TV/AV button to select AV 1, AV 2 Press the PLAY button on the VCR. The VCR AUDIO You R can AV3 playback picture appears on the also record programmes received out sockets. or AV 3. screen. by the TV on video tape via audio/video : If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO socket of the set. Note VCR S-Video / Audio in sockets (R)-AUDIO-(L) When VIDEO OUT S-VIDEO AUDIO AV2 PC SOUND () AV1 (L) (L) (R) (R) Y Y PB PB PR PR AUDIO RGB-PC OUTPUT connecting picture quality will an (S-AV) (option) S-VIDEO VCR to the S-VIDEO socket, the be further improved. MONO RGB-DTV/PC INPUT VIDEO ANT IN VIDEO 1. L L75Ω COMPONENT1 COMPONENT2 (480i/576i) (480p/720p/1080i) DVD/DTV INPUT Connect the S-video socket of the VCR to the S-VIDEO socket RGB-DTV INPUT(480p/720p/1080i) RGB-PC INPUT(VGA/SVGA/XGA/SXGA) of the set. 2. Connect the audio cable from the S-VIDEO VCR to the AUDIO sockets of the set. S-VIDEO VCR 3. Select AV1 4. Press the PLAY button The VCR Note AUDIO AV3 S-VIDEO VCR by pressing on the TV/AV button repeatedly. the VCR. on the screen. If both S-VIDEO and VIDEO sockets have been connected received. R AV3 playback picture appears to the S-VHS S-VIDEOL/MN 30 : or VCR simultaneously, only the S-VIDEO can be Connection of external Component equipment in sockets (R)-AUDIO-(L) 1. Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y or Y PB PR) of the DVD to the COMPONENT 1 (480i/576i) or VIDEO OUT S-VIDEO AV2 AUDIO PC () SOUND AV1 2. (480p/720p/1080i) sockets (Y PB of the set. PR) (R) Y Y PB PB AUDIO RGB-PC OUTPUT VIDEO PR VIDEO PR LL 75Ω COMPONENT1 COMPONENT2 (480i/576i) (480p/720p/1080i) DVD/DTV INPUT RGB-DTV INPUT(480p/720p/1080i) RGB-PC INPUT(VGA/SVGA/XGA/SXGA) Connect the audio cable from the DVD to COMPONENT 1 (480i/576i) or COMPONENT 2 (480p/720p/1080i) AUDIO sockDVD ets of the set. 3. (L) (R) RGB-DTV/PC INPUT ANTIN COMPONENT 2 (L) MONO Press the TV/AV button to select COMPONENT1 COMPO- or NENT2. 4. Press the PLAY button The DVD on the DVD. playback picture appears on the screen. (R)-AUDIO-(L) VIDEO OUT S-VIDEO AV2 AUDIO PC () SOUND AV1 (L) (L) (R) (R) Y Y PB PB AUDIO RGB-PC OUTPUT MONO RGB-DTV/PC INPUT VIDEO DTV in sockets ANT IN PR VIDEO PR LL 75Ω COMPONENT1 COMPONENT2 (480i/576i) (480p/720p/1080) DVD/DTV INPUT 1. 2. HD-SET TOP inputs to the COMPONENT 1 (480i/576i) or COMPONENT 2 (480p/720p/1080i) sockets (Y PB PR) on the set. (or, connect the HD-SET TOP with the D-Sub output socket to RGB-DTV/PC INPUT socket on the set and audio cable of the HD-SET TOP to the AUDIO sockets of AV2.) RGB-DTV INPUT(480p/720p/1080) RGB-PC INPUT(VGA/SVGA/XGA/SXGA) Connect the HD-SET TOP Connect the audio cable from the HD-SET TOP to COMPONENT 1 (480i/576i) or COMPONENT 2 (480p/720p/1080i) AUDIO sockets of the set. (R)-AUDIO-(L) 3. Press the TV/AV button to select COMPONENT2 or RGB- VIDEO OUT S-VIDEO AV2 AUDIO PC SOUND () DTV. AV1 (L) (L) (R) (R) Y Y PB PB AUDIO RGB-PC OUTPUT MONO RGB-DTV/PC INPUT VIDEO ANT IN LL 75Ω PR VIDEO PR COMPONENT1 COMPONENT2 (480i/576i) (480p/720p/1080) DVD/DTVINPUT RGB-DTV INPUT(480p/720p/1080i) RGB-PC INPUT(VGA/SVGA/XGA/SXGA) Monitor out sockets Second TV Connect the audio/video in sockets of the other TV or monitor to OUT sockets of the set. 31 Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in Poor picture reception on some channels No colour Poor colour Remote control does not work Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched Try on another channel (weak signal) Check aerial (plugged Check aerial (broken lead?) into TV?) Check aerial Check for local interference Adjust contrast Adjust brightness Adjust colour Adjust volume Check the batteries in remote control Check Audio/Video sockets (VCR only)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project