LG | RT-48SZ40RB | LG RT-48SZ40RB Owner’s Manual

LCD
PROJECTION TV
ΟΩΝΕΡ∏Σ ΜΑΝΥΑΛ
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
and quote this
information to your dealer when you require service.
Model number
:
Serial number
:
on
the back
cover
Χοντεντσ
Ινσταλλατιον
3
Λοχατιον ανδ φυνχτιον οφ χοντρολσ
Remote control handset
Battery installation
Front panel / Rear panel
4
Βασιχ οπερατιον
On and off / Programme selection
Volume adjustment / Quick view / Mute function
On screen language selection (option)
8
Ον
9
σχρεεν μενυσ
Menu selection
ΣΕΤΥΠ μενυ
Auto programme tuning
Manual programme tuning
Fine Tuning / Programme edit
Calling the programme table
10
ΠΙΧΤΥΡΕ
15
μενυ
PSM(Picture Status Memory)
Picture adjustment
ΑΥΔΙΟ μενυ
SSM (Sound Status Memory) / Dolby Virtual
AVL (Auto Volume Leveler) / Speaker adjustment
Balance adjustment / Equalizer (option)
Sound output selection / Stereo/Dual reception
NICAM reception
16
ΤΙΜΕ
20
μενυ
Auto
sleep
/
Sleep
timer
ΣΠΕΧΙΑΛ μενυ
Main Picture Source Selection
Child Lock / LED DISPLAY adjustment
Picture format
21
Πιχτυρε ιν πιχτυρε (ΠΙΠ) φυνχτιον
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture / Sub picture size
Sub picture freeze / Sub picture position change
23
Τελετεξτ (οπτιον)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
24
Χοννεχτιον οφ ΠΧ
PC in socket / RGB-PC mode
27
(option)
Χοννεχτιον οφ εξτερναλ εθυιπμεντ
Aerial socket
Audio/Video input sockets
S-Video / Audio input sockets (option)
DVD input sockets / DTV input sockets
Τρουβλεσηοοτινγ
2
χηεχκ λιστ
29
31
Ινσταλλατιον
Ποωερ
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
Ωαρνινγ
To prevent fire
moisture.
or
shock
hazard, do
not expose the set to rain or
Σερπιχε
Never
remove
the back cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
high voltage
properly, unplug it
very
Αεριαλ
Connect the aerial cable to the socket marked +75 Ω on the back
cover. For the best reception an outdoor aerial should be used.
Λοχατιον
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
Avoid having a fixed image remain on the screen for a
of time. Typically a frozen still picture from a VCR, 4:3
mat or if a CH label is present;
the fixed image may remain visible on the screen.
long period
picture for-
THE STANDARD OF PRODUCTION TECHNIQUES TODAY CANNOT GUARANTEE AN ABSOLUTELY FAULT FREE L.C.D. DISPLAY.
A FEW ISOLATED CONSTANT LIT OR DARK PIXELS (sub-pixels)
MAY BE PRESENT. THIS MAY BE VISIBLE AS COLOURED
DOTS ON SCREEN AND DOES NOT MEAN THE SCREEN IS
UNACCEPTABLE OR FAULTY. Depending on area of screen,
colour, lit or unlit, pixels are evaluated against a set criteria.
THE MAXIMUM NUMBER OF FAULTY SUBPIXELS PERMITTED
IS STIPULATED IN THE STRINGENT INTERNATIONAL STANDARD ISO 13406-2 (Class III).
Μανυφαχτυρεδ υνδερ λιχενσε φρομ Δολβψ Λαβορατοριεσ. Δολβψⓒ
ανδ τηε δουβλε-Δ σψμβολ αρε τραδεμαρκσ οφ Δολβψ Λαβορατοριεσ.
3
Λοχατιον ανδ φυνχτιον οφ χοντρολσ
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Τ?
Ρεμοτε χοντρολ ηανδσετ
VCR
1
DVD
Before you use the remote control handset,
teries. See the next page.
CABLE
STB
AUDIO
1.
2
MODE
TV/AV
3
MULTIMEDIA
2.
POWER
ARC
4
456
5
789
SLEEP
PSM
PR
PIP/DW
9
7.
ΟΚ
11
PIP PR-
PIP INPUT
PIP PR+
SWAP
PLAY
PAUSE
STOP
REW
FF
RECORD
12
SKIP
13
LIST
or
RGB-DTV, RGB-PC modes.
standby
or
directly
a
sleep
timer.
?ΟΛ + /
(?ολυμε Υπ/Δοων)
Increases/decreases sound level.
-
-
a
(Προγραμμε Υπ/Δοων)
programme.
SIZE
REVEAL
I/II
?
STILL
INDEX
MIX
MODE
Μ
8.
ΠΣΜ (Πιχτυρε Στατυσ
recalls your preferred
9.
ΠΙΠ ΒΥΤΤΟΝΣ (οπτιον)
ΠΙΠ/ΔΩ
switches the sub picture on or off.
selects PIP, POP or DW modes.
ΠΙΠ ΠΡ +/selects a programme for the sub picture.
Μεμορψ)
picture setting.
ΣΩΑΠ
alternates between main and sub picture.
ΠΙΠ ΙΝΠΥΤ
selects the input mode for the sub picture.
ΣΙΖΕ
adjusts the sub picture size.
ΣΤΙΛΛ
freezes motion of the sub picture.
ΠΟΣΙΤΙΟΝ
relocates the sub picture in clockwise direction.
10. ΜΕΝΥ
selects
a menu.
11. ΟΚ
accepts your selection
or
displays
the current mode.
Δ/ΕorΦ/Γ
Adjusts
Selects
menu
settings.
menu
item.
12. Δ?Δ ΒΥΤΤΟΝΣ
control a LG DVD
player.
13. ?ΧΡ ΒΥΤΤΟΝΣ
control a LG video cassette recorder.
4
select
EXIT
10
TIME
1/2
ΣΛΕΕΠ
ΠΡ + /
selects
TEXT
MENU
POSITION
DVD function.
or
ΝΥΜΒΕΡ ΒΥΤΤΟΝΣ
switches the set on from
sets the
SSM
VOL
8
TV, VCR
ΜΥΛΤΙΜΕΔΙΑ
selects Component
6.
7
LG
4.
5.
Q.VIEW
a
Τ?/Α?
selects the remote operating mode.
switches the set on from standby.
0
6
ΜΟΔΕ
3.
123
install the bat-
the selected device
Displays
selects
MUTE
please
number.
Λοχατιον ανδ φυνχτιον οφ χοντρολσ
14. ΠΟΩΕΡ
switches the set
on
15. ΜΥΤΕ
switches the sound
from
standby
or
off to
standby.
Τ?
VCR
on or
off.
DVD
CABLE
STB
16. ΑΡΧ
(Ασπεχτ Ρατιο Χοντρολ)
changes the picture format.
17. Θ.?ΙΕΩ
returns to the
AUDIO
MODE
TV/AV
previously
viewed programme.
MULTIMEDIA
18. ΣΣΜ (Σουνδ Στατυσ Μεμορψ)
recalls your preferred sound setting.
19. ΤΕΛΕΤΕΞΤ ΒΥΤΤΟΝΣ (οπτιον)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
POWER
ARC
14
MUTE
1
23
4
56
7
89
SLEEP
15
16
Q.VIEW
0
20. ΕΞΙΤ
Clears all
on-screen
displays
and returns to TV
viewing
17
from any
menu.
PSM
SSM
VOL
21. Ι/ΙΙ
selects the language during dual language broadcast.
selects the sound output (option).
18
PR
PIP/DW
TEXT
19
EXIT
MENU
22. ΛΙΣΤ
20
displays
Νοτε
τονσ
:
the programme table.
Ιν τελετεξτ μοδε, τηε ΠΙΠ ΠΡ
υσεδ φορ τελετεξτ φυνχτιον.
+/-, ΣΩΑΠ ανδ ΠΙΠ ΙΝΠΥΤ βυτ-
αρε
Βαττερψ
ΟΚ
ινσταλλατιον
PIP PR-
The remote control handset is powered by two AA type batteries. To
load the batteries, turn the remote control handset over and open
the battery compartment. Install two batteries as indicated by the
polarity symbols ( + and ) marked inside the compartment.
PIP INPUT
PIP PR+
SWAP
PLAY
PAUSE
STOP
REW
FF
RECORD
-
POSITION
TIME
LIST
SKIP
SIZE
REVEAL
?
STILL
INDEX
MIX
MODE
Μ
I/II
21
22
Νοτε : Το αποιδ δαμαγε φρομ ποσσιβλε βαττερψ λεακαγε, ρεμοπε τηε
βαττεριεσ ιφ ψου δο νοτ πλαν το υσε τηε ρεμοτε χοντρολ ηανδσετ φορ αν
εξτενδεδ περιοδ οφ τιμε.
5
Λοχατιον ανδ φυνχτιον οφ χοντρολσ
Φροντ
πανελ
Λαμπ ινδιχατορ, οπερατιον ινδιχατορ, ανδ τεμπερατυρε ινδιχατορ,
οπερατινγ στατυσ οφ τηε ΛΧΔ προφεχτιον Τ?.
λοχατεδ βελοω τηε φροντ
πανελ
χον-
τρολσ ρεπεαλ τηε
B
TV/AV
MENU
OK
VOL
PR
B
D
VRA
Τ?/Α?
1
2
1.
ΜΑΙΝ ΠΟΩΕΡ (ΟΝ/ΟΦΦ)
switches the set on or off.
2.
ΛΕΔ
3.
ΟΠΕΡΑΤΙΟΝ ΙΝΔΙΧΑΤΟΡ
(Refer
4.
ΛΑΜΠ ΙΝΔΙΧΑΤΟΡ
to
5.
ΤΕΜΠΕΡΑΤΥΡΕ ΙΝΔΙΧΑΤΟΡ
6.
Τ?/Α?
χεντερ οφ τηε
selects the remote operating mode.
switches the set on from standby.
Τηισ
ΟΚ
?ΟΛ
3456789
9.
(Λιγητ Εμιττινγ Διοδε) ΔΙΣΠΛΑΨ
10.
(Refer
ΜΕΝΥ
to
p.7)
ΠΡ
1011
Φ / Γ
(?ολυμε Δοων/Υπ)
adjusts the volume.
adjusts menu settings.
/ Ε
Δ
(Προγραμμε Υπ/Δοων)
selects a programme or a menu item.
switches the set on from standby.
p.7)
11. ΡΕΜΟΤΕ ΧΟΝΤΡΟΛ ΣΕΝΣΟΡ
(Refer
to
p.7)
Νοτε
7.
8.
ΜΕΝΥ
selects
a menu.
ΟΚ
accepts your selection
mode.
6
or
displays
the current
:
ισ
σχρεεν.
Τηερε
μιγητ
βε
σχρεεν
νορμαλ
ανδ
α
φαιντ ωηιτε τραχε ον τηε
το τηε ποσιτιον.
α χηαραχτεριστιχ οφ τηε
αχχορδινγ
ισ
Λοχατιον ανδ φυνχτιον οφ χοντρολσ
Ρεαρ
πανελ
Σ-?ΙΔΕΟ
ΙΝΠΥΤ
ΣΟΧΚΕΤ
AV3
INPUT
S-VIDEO
VIDEO
Α?3 ΙΝΠΥΤ
ΣΟΧΚΕΤ
(L)/
AUDIO MONO
AV3
NPUT
-VDEO
VDEO
(L/
ADO ONO
(R)
ANT N
75‰
LL
(R)
SDE
AV
R
L
PC/DTVNPUT COMPONENT COMPONENT
INPUT1
INPUT 2
Υ
Π
RGB
Γ
576i480i
XGA/
Ρ
57p48p
72
p/
57
p/
p/
p/
Α
48
Δ
1080i
576/480i
57
p/48p
72
p/
1080i
72
Ε
Π
1080i)
Ο
SIDE A/V
Ρ
Y
Τ
(L)
AUDO
S-VIDEO
PB
(R)
A/V1
A/V2
NPUT
NPUT
R
ONOR
OUT
AUDO
CENTER
MODE N
VA
AU
RD
I
I
O
A
B
O
LU
E
(L)
(L)
L)
AUDIO
AUDO
(R)
(R)
AUDO
MONO
(R)
T
DTV/DVD NPUT
ΕΞΤΕΡΝΑΛ ΣΠΕΑΚΕΡ
ΟΥΤΠΥΤ (8 οημ)
Connect to optional
external speaker(s).
R
ΡΓΒ ΙΝΠΥΤ
ΣΟΧΚΕΤΣ
PC/DTV INPUT
Υ
Π
Γ
port is used
upgrade
Π
Ο
Ρ
Τ
to
port. Just
your dealer
Α?1/2 / ΜΟΝΙΤΟΡ
ΟΥΤ(ΑΥΔΙΟ/?ΙΔΕ
Ο), Σ-?ΙΔΕΟ
S-VIDEO
PB
(R)
PR
A/V 1
A/V 2
MONITOR
INPUT
INPUT
OUT
ΙΝΠΥΤ ΣΟΧΚΕΤΣ
AUDIO
CENTER
MODE IN
use
(L)
VA
A U
contact
or
1080i
AUDIO
hardware.
this
576i/480i
576p/480p
720p/
1080i
(L)
debug
changing the
Be careful not to
576i/480i
576p/480p
720p/
Y
the software
version and
without
COMPONENT COMPONENT
INPUT 1
INPUT 2
(XGA/
576p/
480p/
720p/
1080i)
Ε
ΥΠΓΡΑΔΕ ΠΟΡΤ
ΑΕΡΙΑΛ ΣΟΧΚΕΤ
RGB
Ρ
Α
Δ
This
L
RI DIO
service
A
BLE
centre.
(L)
AUDIO
AUDIO
O
U
T
(R)
(L)
AUDIO
MONO
(R)
(R)
ΔΤ?/Δ?Δ ΙΝΠΥΤ
ΣΟΧΚΕΤΣ
DTV/DVD INPUT
?ΑΡΙΑΒΛΕ ΑΥΔΙΟ
ΟΥΤ ΣΟΧΚΕΤΣ
∞Στατυσ Ινδιχατορσ
Operation
Lamp
Indicator
Off
Power cord is not connected.
Red
Power Cord is connected, unit is
Green
On
Orange (flashing)
Preparing operation
Orange
Projection lamp
Indicator
needs to be
Green
Temperature
Indicator
is
in
replaced
with
the end of its life and
a new
(flashing)
Orange
Red
The set has shut down due to
Red
(flashing)
lamp
The set is
standby.
standby.
reaching
The
cover
on
lamp.
is not closed.
overheating.
overheating.
The set has shut down, check the
cooling
fan.
7
Βασιχ
Οπερατιον
Ον ανδ οφφ
Before turning the set on, be sure that the main power switch
the set is pushed on.
When the main switch is pushed on, the LED will be lit up red.
This mode is Stand-by.
If the set is in stand-by mode, press the ΠΟΩΕΡ, ΠΡ +/-,
Τ?/Α?, ΜΥΛΤΙΜΕΔΙΑ or NUMBER button on the remote control handset to turn it on fully. The LED will blink orange for a
while and then lit up green when the power is successfully on.
To turn the set off, press the power button on the remote control handset. The set reverts to the stand-by mode.
1.
on
2.
Τ?
VCR
3.
DVD
CABLE
STB
AUDIO
Νοτε :
Τηε λαμπ χοολινγ φαν ωιλλ χοντινυε το σπιν φορ αππροξιματελψ 120
σεχονδσ αφτερ τηε ποωερ ισ τυρνεδ οφφ βψ τηε ρεμοτε χοντρολ
ηανδσετ.
β.
Νορμαλλψ, δον∏τ πυση οφφ τηε μαιν ποωερ σωιτχη. Ινστεαδ, υσε τηε
ρεμοτε χοντρολ το τυρν τηε ποωερ οφφ.
χ.
Ωηεν τηε σετ ισ τυρνεδ ον αγαιν ιμμεδιατελψ αφτερ τυρνινγ οφφ, ιτ
τακεσ αρουνδ 30 το 50 σεχονδσ φορ συφφιχιεντ χοολινγ.
δ. Ωηεν τηε ποωερ ισ σωιτχηεδ οφφ υσινγ τηε μαιν ποωερ σωιτχη ον
τηε σετ, τηε ιντερναλ χοολινγ σψστεμ αλσο στοπσ οπερατινγ.
Τηερεφορε, ποωερ-ον βψ μαιν ποωερ σωιτχη τακεσ αρουνδ 30 το
50 σεχονδσ φορ συφφιχιεντ χοολινγ.
ε.
Φορχεδ Ποωερ-Οφφ : Ωηεν τηε σετ δεχιδεσ ιτσελφ τηατ τηε χιρχυμστανχε ισ νοτ προπερ φορ οπερατιον, τηε σετ ωιλλ γοεσ το τηε στανδβψ μοδε αυτοματιχαλλψ. Πλεασε ρετρψ το τυρν ον τηε σετ αφτερ α
σηορτ περιοδ οφ τιμε.
φ.
Ωηεν τηε σετ ισ σωιτχηεδ ον, τηερε μιγητ βε α στρανγε σουνδ
φρομ τηε σετ.
α.
TV/AV
POWER
MULTIMEDIA
MUTE
1
23
4
56
7
89
Q.VIEW
0
SSM
PR
VOL
Προγραμμε σελεχτιον
MENU
You can select
buttons.
?ολυμε
ΟΚ
a
programme number with the ΠΡ +/-
or
NUMBER
αδφυστμεντ
Press the ?ΟΛ +/- button to
adjust
the volume.
Θυιχκ πιεω
Press the Θ.?ΙΕΩ button to view the last programme you
were
watching.
Μυτε φυνχτιον
Press the ΜΥΤΕ button. The sound is switched off and the
display
Mute
appears.
You can cancel it
Ον
σχρεεν
by pressing
the ΜΥΤΕ, ?ΟΛ
+/-, ΣΣΜ, Ι/ΙΙ button.
λανγυαγε σελεχτιον (οπτιον)
The menu can be displayed
First select your language.
on
the
in desired
screen
language.
I/II
1.
Press the ΜΕΝΥ button and then
Special
2.
/
Δ
Ε
button to select the
menu.
Press the
Γ
button
and
then
the
Δ
/
Ε
button
to
select
Language.
3.
4.
5.
Press the Γ button and then the Δ / Ε button to select your
desired language.
Press the ΟΚ or Φ button.
All the on screen displays will appear in the selected language.
Repeatedly press the ΜΕΝΥ button to return to normal TV
viewing.
8
Ον Σχρεεν Μενυσ
Τηε
διαλογυε βετωεεν ψου ανδ
ρεθυιρεδ φορ τηε οπερατινγ στεπσ
ψουρ σετ τακεσ πλαχε
αλσο δισπλαψεδ.
ον σχρεεν
ωιτη
οπερατορ
αν
μενυ.
Τηε βυττονσ
αρε
Μενυ σελεχτιον
1.
Press the ΜΕΝΥ button and then
Δ
2.
Press the
/
3.
Repeatedly press
Νοτε :
Ον
α.
σομε
Γ
button and then the
Δ
/
Ε
Ε
button to
display
button to select
each
a menu
the ΜΕΝΥ button to return to normal TV
menu.
item.
viewing.
μοδελσ, τηε Language ωιλλ νοτ βε δισπλαψ.
SETUP
SETUP
Γ
Auto programme
PSM
SETUP
SETUP
Manual programme
PICTURE
Contrast
PICTURE
PICTURE Γ
Programme edit
Brightness
Colour
AUDIO
AUDIO
AUDIO
AUDIO
TIME
TIME
SPECIAL
SPECIAL
SPECIAL
SPECIAL
ΣΕΤΥΠ
Sharpness
ΠΙΧΤΥΡΕ
μενυ
μενυ
SSM
SETUP
AVL
PICTURE
PICTURE
TV
speaker
Balance
AUDIO
AUDIO Γ
Equalizer
TIME
SPECIAL
ΑΥΔΙΟ
SETUP
Main
PIP
PICTURE
input
Auto
SETUP
input
μενυ
sleep
Sleep timer
PICTURE
PICTURE
Child lock
Language
AUDIO
AUDIO
AUDIO
Index
TIME
TIME
SPECIAL Γ
SPECIAL
ΣΠΕΧΙΑΛ
μενυ
Γ
ΤΙΜΕ
μενυ
9
ΣΕΤΥΠ Μενυ
SETUP
SETUP
Γ
Auto programme
Manual programme
PICTURE
Programme edit
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use the
ΠΡ +/- or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Αυτο προγραμμε
AUDIO
τυνινγ
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
TIME
1.
SPECIAL
SPECIAL
2.
Press the ΜΕΝΥ button and then Δ / Ε button to select the
SETUP menu.
Press the Γ button and then Δ / Ε button to select Auto pro-
gramme.
3.
Τ?
Press the Γ button to select
the Δ / Ε button;
System.
Select
TV
a
system with
VCR
DVD
SETUP
SETUP
CABLE
STB
AUDIO
PICTURE
Auto programme Γ
System
I
Manual programme
Storage from
9
Programme edit
To start
AUDIO
AUDIO
TIME
1
23
4
56
7
89
SPECIAL
SPECIAL
Φ Prev.
0
4.
PR
5.
6.
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the Γ button to select Storage from. Select the beginning programme number with the Δ / Ε button or NUMBER
buttons on the Storage from menu.
Press the Γ button to select To start.
Press the Γ button to begin auto programming.
MENU
SETUP
SETUP
PICTURE
AUDIO
AUDIO
ΟΚ
Auto programme
System
I
Manual programme
Storage from
9
Programme edit
To start
Γ
Searching...
88%
15
TIME
SPECIAL
SPECIAL
MENU
7.
All receivable stations are stored. The station name is stored for
stations which broadcast VPS (Video Programme Service),
PDC (Programme Delivery Control) or TELETEXT data. If no
station name can be assigned to a station, the channel number
is assigned and stored as C (V/UHF 01-75) or S (Cable 01-44),
followed by a number.
To stop auto programming, press the ΜΕΝΥ button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme Edit' section
to edit the stored programme.
Repeatedly Press the ΜΕΝΥ button to return to normal TV
viewing.
10
Stop
ΣΕΤΥΠ Μενυ
Μανυαλ προγραμμε
τυνινγ
SETUP
SETUP
Γ
Auto programme
Manual programme
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
Press the ΜΕΝΥ button and then Δ / Ε button to select the
SETUP menu.
Press the Γ button and then Δ / Ε button to select Manual
3.
programme.
Press the Γ button to
display
PICTURE
Programme edit
AUDIO
AUDIO
TIME
SPECIAL
SPECIAL
the Manual programme
menu.
SETUP
Auto programme
System
Manual programmeΓ
Band
Programme edit
Channel
Τ?
BG
VCR
DVD
V/UHF
CABLE
PICTURE
AUDIO
AUDIO
Search
Up/Down
Fine
Up/Down
Name
TIME
47
STB
AUDIO
C5
Storage
10
Booster
Off
SPECIAL
Φ Prev.
4.
Press the Γ button to select System. Select a TV system with
the Δ / Ε button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
DK
M
:
:
:
1
23
4
56
7
89
(Hong Kong/South Africa)
(East Europe/China/Africa/CIS)
(USA/Korea/Philippines) (option)
Press the Γ button to select Band. Press the Δ / Ε button to
select V/UHF or Cable as required.
6. Press the Γ button to select Channel. Select the desired channel number with the Δ / Ε button or NUMBER buttons. If possible, select the channel number(1 to 75) directly with the number
buttons.
7. Press the Γ button to select Search. Press the Δ / Ε button to
commence searching. If a station is found the search will stop.
8. If this station is the one required, press the Φ / Γ button to select
Storage. Select the desired programme number with the Δ / Ε
button or NUMBER buttons.
9. Press the ΟΚ button to store it.
10. To store another station, repeat steps 4 to 9.
11. Repeatedly press the ΜΕΝΥ button to return to normal TV
0
5.
MENU
ΟΚ
viewing.
11
ΣΕΤΥΠ Μενυ
SETUP
SETUP
Γ
Auto programme
Manual programme
PICTURE
Programme edit
Ασσιγνινγ α στατιον ναμε
1. Repeat the 'Manual programme tuning' steps
2.
3.
AUDIO
4.
TIME
5.
6.
SPECIAL
SPECIAL
1 to 3.
Press the Γ button to select Name.
Press the Δ button. You can use a blank, +, -, the numeric 0 to
9 and the alphabet A to Z.
With the Ε button you can select in the opposite direction.
Select the next position by pressing the Γ button and then take
your choice of the second character, and so on.
Press the ΟΚ button.
Repeatedly press the ΜΕΝΥ button to return to normal TV
viewing.
Τ?
VCR
DVD
Βοοστερ (οπτιον)
In some models, Booster is an optional function.
Booster can perform this function.
Only
a
set with
CABLE
STB
AUDIO
1
23
4
56
7
89
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
1.
2.
3.
4.
the 'Manual programme tuning' steps 1 to 3.
Press the Φ / Γ button to select Booster.
Press the Δ / Ε button to select On or Off.
Repeatedly press the ΜΕΝΥ button to return to normal TV
Repeat
viewing.
Φινε
τυνινγ
0
Normally
1.
2.
3.
fine
tuning
is
only necessary
if
reception
is poor.
the 'Manual programme tuning' steps 1 to 3.
Press the Γ button to select Fine.
Press the Δ / Ε button to fine tune for the best picture and
sound.
Repeat
MENU
SETUP
PICTURE
ΟΚ
Auto programme
System
Manual programme
Band
Programme edit
Channel
AUDIO
47
Search
Up/Down
Fine
Υπ/Δοων
Name
TIME
BG
V/UHF
BLN 2
Storage
10
Booster
Off
SPECIAL
Φ Prev.
4.
5.
Press the ΟΚ button.
Repeatedly press the ΜΕΝΥ button to return to normal TV
viewing.
The finely tuned programme will
during programme selection.
12
Store
be indicated
by yellow
number
ΣΕΤΥΠ Μενυ
Προγραμμε
εδιτ
SETUP
SETUP
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
copy a blank station data into the selected programme number.
1.
2.
3.
Press the ΜΕΝΥ button and then Δ / Ε button to select the
SETUP menu.
Press the Γ button and then Δ
button to select
/ Ε
edit.
Programme
Press the Γ button to display the Programme edit menu.
C1
MENU
Prev.
Auto programme
Manual programme
PICTURE
Programme edit
AUDIO
AUDIO
TIME
SPECIAL
SPECIAL
1
0C1
1C4
2C5
3S2
4C1
5C6
6C3
7C1
8C7
9C1
10C2
11-----
12-----
13-----
14-----
15-----
VCR
16-----
17-----
18-----
19-----
DVD
20-----
21-----
22-----
23-----
24-----
25-----
26-----
27-----
STB
28-----
29-----
30-----
31-----
AUDIO
32-----
33-----
34-----
35-----
36-----
37-----
38-----
39-----
Select
Delete
Copy
Move
Τ?
CABLE
Skip
Δελετινγ α προγραμμε
1. SelectaprogrammetobedeletedwiththeΔ /ΕorΦ
/Γbut-
ton.
2.
Γ
Press the ΡΕΔ button twice.
The selected programme is deleted,
grammes are shifted up one position.
all the
following pro-
Χοπψινγ α προγραμμε
1. SelectaprogrammetobecopiedwiththeΔ/ΕorΦ
1
23
4
56
7
89
0
/Γbut-
ton.
PR
2.
3.
Press the ΓΡΕΕΝ button.
Move the programme to the desired programme number with the
4.
Press the ΓΡΕΕΝ button again to move the programme.
All the following programmes are shifted down one position.
Δ/ΕorΦ/Γbutton.
MENU
Μοπινγ α προγραμμε
1. SelectaprogrammetobemovedwiththeΔ/ΕorΦ/Γbutton.
ΟΚ
2.
3.
Press the ΨΕΛΛΟΩ button.
Move the programme to the desired programme number with the
4.
Press the ΨΕΛΛΟΩ button
Δ/ΕorΦ/Γbutton.
again
to release this function.
α προγραμμε νυμβερ
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
Press the ΒΛΥΕ button. The skipped programme turns to blue.
Press the ΒΛΥΕ button again to release the skipped programme.
When a programme number is skipped it means that you will be
unable to select it using the ΠΡ +/- button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Σκιππινγ
1.
2.
3.
Repeatedly press
the ΜΕΝΥ button to return to normal TV
viewing.
13
ΣΕΤΥΠ Μενυ
Χαλλινγ
τηε προγραμμε ταβλε
You can check the programmes stored in the memory
the programme table.
by displaying
ταβλε
Press the ΛΙΣΤ button to display the Programme table
The programme table appears on the screen.
Δισπλαψινγ προγραμμε
Τ?
VCR
menu.
DVD
CABLE
STB
C1
1
AUDIO
LIST
0C1
1C4
2C5
3S2
4C1
5C6
6C3
7C1
8C7
9C1
10C2
11-----
12-----
13-----
14-----
15-----
16-----
17-----
18-----
19-----
20-----
21-----
22-----
23-----
24-----
25-----
26-----
27-----
28-----
29-----
30-----
31-----
32-----
33-----
34-----
35-----
36-----
37-----
38-----
39-----
Select
Exit
Νοτε :
Ψου μαψ φινδ σομε βλυε ηιγηλιγητεδ προγραμμεσ σηοων. Τηεψ
ηαπε βεεν σετ υπ ιν τηε προγραμμε εδιτ μοδε.
β. Σομε προγραμμεσ ωιτη τηε χηαννελ νυμβερ σηοων ιν τηε προγραμμε ταβλε ινδιχατε τηερε ισ νο στατιον ναμε ασσιγνεδ.
α.
α προγραμμε ιν τηε προγραμμε ταβλε
Select a programme with the Δ / Ε or Φ / Γ button.
The set switches to the chosen programme number.
Σελεχτινγ
ΟΚ
α προγραμμε ταβλε
3 programme table pages in which contain 100 pro-
Παγινγ τηρουγη
There
are
grammes.
Pressing the
Δ
/ Ε or Φ / Γ
button
repeatedly
Press the ΛΙΣΤ button to return to normal TV
LIST
14
turns the pages.
viewing.
ΠΙΧΤΥΡΕ Μενυ
ΠΣΜ
1.
2.
3.
(Πιχτυρε
Στατυσ
Μεμορψ)
SETUP
SETUP
Press the ΜΕΝΥ button and then Δ / Ε button to select the PICTURE menu.
Press the Γ button and then Δ / Ε button to select PSM.
Press the Γ button and then Δ / Ε button to select a picture setting on the PSM pull-down menu.
SETUP
PICTURE
AUDIO
PSM
Contrast
Standard
Brightness
Mild
Colour
Game
Sharpness
User
PICTURE Γ
Brightness
Colour
AUDIO
Sharpness
TIME
Dynamic
Γ
PSM
Contrast
SPECIAL
SPECIAL
Τ?
TIME
VCR
DVD
CABLE
SPECIAL
STB
Φ Prev.
4.
Press the ΟΚ
5.
Repeatedly
viewing.
Πιχτυρε
You
can
or Φ button.
press the ΜΕΝΥ button to return to normal TV
αδφυστμεντ
adjust picture contrast, brightness,
and tint (NTSC
levels you prefer.
ness
1.
2.
3.
AUDIO
AV, COMPONENT
Press the ΜΕΝΥ button
TURE menu.
Press the Γ button and
picture item.
Press the Γ button and
adjustments, then it will
and then
then
Δ
or
Δ / Ε
/ Ε
colour intensity, sharpRGB mode only) to the
button to select the PIC-
button to select the desired
then Φ / Γ button to make appropriate
be stored for the picture User.
PSM
SETUP
SETUP
Contrast
100Φ
Γ
MENU
PICTURE
AUDIO
ΟΚ
TIME
SPECIAL
SPECIAL
4.
5.
Press the ΟΚ button.
Repeatedly press the ΜΕΝΥ button to return to normal TV
viewing.
Νοτε
:
Τηε
αδφυστμεντ φορ ΠΙΧΤΥΡΕ
μενυ
(χοντραστ, βριγητνεσσ,
χολουρ, σηαρπνεσσ ανδ τιντ) αφφεχτ βοτη τηε μαιν ανδ συβ πιχτυρε ιν
ΠΙΠ
ορ
Τωιν Πιχτυρε μοδε.
To recall your preferred setting, press the ΠΣΜ button until the
desired picture (Dynamic, Standard, Mild, Game or User)
appears. The picture Dynamic, Standard, Mild and Game are
programmed for good picture reproduction at the factory and cannot be changed.
15
ΑΥΔΙΟ ΜΕΝΥ
SETUP
SETUP
ΣΣΜ
SSM
(Σουνδ Στατυσ Μεμορψ)
AVL
PICTURE
TV
You
preferred sound setting; Dolby virtual, Flat,
Speech and you can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, the set automatically keeps on an equal volume level even if you change pro-
speaker
Balance
AUDIO Γ
can
select your
Music, Movie,
Equalizer
or
grammes.
TIME
1.
SPECIAL
SPECIAL
2.
3.
Τ?
Press the ΜΕΝΥ button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select SSM.
Press the Γ button and then Δ / Ε button to select a sound setting on the SSM pull-down menu.
VCR
DVD
SSM
SETUP
SETUP
Γ
Dolby
virtual
CABLE
AVL
STB
AUDIO
PICTURE
AUDIO
TV
speaker
Flat
Music
Balance
Movie
Equalizer
Speech
User
TIME
SPECIAL
SPECIAL
Φ Prev.
SSM
4.
Press the ΟΚ
5.
Repeatedly press
viewing.
Δολβψ
or Φ
?ιρτυαλ
Virtual lets you
Dolby
button.
the ΜΕΝΥ button to return to normal TV
experience panoramic
effects of sound.
To recall your
desired sound
preferred setting, press the SSM button until the
(Dolby virtual, Flat, Music, Movie, Speech or
User) appears. The sound Dolby virtual, Flat, Music, Movie
and Speech are programmed for good sound reproduction at the
factory and cannot be changed.
MENU
ΟΚ
16
Ιφ ψου πρεσσ τηε SSM βυττον αφτερ
τηε Equalizer συβ μενυ, τηε
Νοτε
:
μεντ
ον
μακινγ αππροπριατε αδφυστδισπλαψ Υσερ αυτοματιχαλλψ
αππεαρσ επεν τηουγη ψου ηαπε αλρεαδψ σετ α φαχτορψ πρεσετ σεττινγ;
Dolby virtual, Flat, Music, Movie ορ Speech.
ΑΥΔΙΟ ΜΕΝΥ
Α?Λ
(Αυτο
?ολυμε
Λεπελερ)
SETUP
SETUP
If you select AVL On, the set automatically
ume level even if you change programmes.
keeps
1.
Ε
2.
3.
4.
on an
equal
volPICTURE
Press the ΜΕΝΥ button and then Δ /
button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select AVL.
Press the Γ button and then Δ / Ε button to select On or Off
on the AVL pull-down menu.
Press the ΟΚ or Φ button.
SSM
AVL
TV
speaker
Balance
AUDIO Γ
Equalizer
TIME
SPECIAL
SPECIAL
SSM
SETUP
SETUP
AVL
PICTURE
TV
Γ
Off
Τ?
On
speaker
VCR
DVD
Balance
AUDIO
CABLE
STB
Equalizer
AUDIO
TIME
SPECIAL
Φ Prev.
5.
Repeatedly press
viewing.
the ΜΕΝΥ button to return to normal TV
Σπεακερ αδφυστμεντ
You
1.
2.
3.
can
adjust
internal
speaker
status.
Press the ΜΕΝΥ button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select TV speaker.
Press the Γ button and then Δ / Ε button to select On, Center
or Off on the TV speaker pull-down menu.
SETUP
SETUP
SSM
MENU
AVL
PICTURE
PICTURE
TV
speaker
Balance
AUDIO
AUDIO
Equalizer
Γ
On
Center
Off
ΟΚ
TIME
TIME
SPECIAL
SPECIAL
Φ Prev.
4.
5.
Press the ΟΚ button.
Repeatedly press the ΜΕΝΥ button to return to normal TV
viewing.
Νοτε :
α.
Αλλοωσ ψου το τογγλε τηε Τ? ιντερναλ σπεακερσ On, Center ορ
Off. Ιφ ψου ωαντ το υσε ψουρ εξτερναλ ηι-φι στερεο σψστεμ, τυρν οφφ
τηε ιντερναλ Τ? σπεακερσ. Ηοωεπερ, ψου μαψ υσε τηε ιντερναλ
Τ? σπεακερσ ασ α χεντερ σπεακερ το χρεατε α συρρουνδ εφφεχτ.
β. Χεντερ σπεακερ ισ νοτ απαιλαβλε ιν Τ? φορ μαιν σουρχε.
Ιν RGB-DTV/PC μοδε, ιντερναλ σπεακερ/παριαβλε αυδιο χαν βε
χ.
ουτπυτ επεν τηουγη τηερε ισ νο πιδεο σιγναλ.
17
ΑΥΔΙΟ ΜΕΝΥ
SETUP
SETUP
PICTURE
SSM
Βαλανχε
AVL
You
TV
speaker
1.
Balance
AUDIO Γ
Equalizer
2.
3.
can
αδφυστμεντ
adjust
balance.
Press the ΜΕΝΥ button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select Balance.
Press the Γ button.
TIME
SETUP
SETUP
Balance
SPECIAL
SPECIAL
0Φ
Γ
PICTURE
PICTURE
AUDIO
AUDIO
Τ?
VCR
TIME
TIME
DVD
CABLE
STB
SPECIAL
SPECIAL
AUDIO
4.
5.
6.
Make desired
pull-down
adjustment
with the
Φ
/
Γ
button
on
the Balance
menu.
Press the ΟΚ button.
Repeatedly press the ΜΕΝΥ button to return to normal TV
viewing.
Εθυαλιζερ (οπτιον)
1.
2.
3.
Press the ΜΕΝΥ button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select Equalizer.
Press the Γ button in Equalizer to display the Equalizer sub
4.
5.
Select a sound band by pressing the Φ / Γ button.
Make appropriate sound level with the Δ / Ε button.
menu.
SETUP
SETUP
SSM
AVL
MENU
PICTURE
PICTURE
TV
speaker
Balance
AUDIO
AUDIO
Equalizer
TIME
TIME
ΟΚ
120 500 1.5k
5k
10k
(Hz)
SPECIAL
SPECIAL
Φ Prev.
Press the ΟΚ button.
Repeatedly press the ΜΕΝΥ button to return to normal TV
6.
7.
viewing.
Σουνδ ουτπυτ σελεχτιον
In AV mode, you
can
select output sound for the left and
right
loud-
speakers.
Repeatedly press the Ι/ΙΙ button to select the sound output.
:
Audio signal from audio L input is sent to the left loud
speaker and audio signal from audio R input is sent to the
right loud speaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
L+R
I/II
18
ΑΥΔΙΟ ΜΕΝΥ
Στερεο/Δυαλ
When
ρεχεπτιον
programme is selected, the sound information for the station
appears after the programme number and station name disappear.
a
Broadcast
On Screen
Mono
MONO
Display
Τ?
VCR
Stereo
STEREO
DVD
CABLE
DUAL I
Dual
STB
AUDIO
Μονο σουνδ σελεχτιον
In stereo
reception if the stereo signal is weak, you can switch to
by pressing the Ι/ΙΙ button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the Ι/ΙΙ button
twice again.
mono
σελεχτιον φορ δυαλ
Λανγυαγε
If
λανγυαγε
βροαδχαστ
programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the Ι/ΙΙ buta
ton
repeatedly.
DUAL I sends the
primary broadcast language to the loudspeakers.
secondary broadcast language to the loud-
DUAL II sends the
speakers.
DUAL I+II sends
ΝΙΧΑΜ
a
separate language
to each
loudspeaker.
ρεχεπτιον
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the Ι/ΙΙ button repeatedly.
1.
NICAM
When
MONO
2.
When
or
mono
is
received, you
can
select NICAM
FM MONO.
NICAM stereo is received, you can select NICAM
or FM MONO. If the stereo signal is weak, switch to
STEREO
FM
3.
mono.
When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or MONO.
I/II
19
ΤΙΜΕ ΜΕΝΥ
SETUP
SETUP
Auto
sleep
Sleep
timer
PICTURE
Αυτο
1.
AUDIO
TIME
2.
3.
Γ
σλεεπ
If there is
minutes.
no
input signal,
the set will turn off
automatically
after 10
Press the ΜΕΝΥ button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select Auto sleep.
Press the Γ button and then Δ / Ε button to select On or Off.
sleep
Auto
SETUP
Γ
Off
SPECIAL
SPECIAL
Sleep timer
On
PICTURE
AUDIO
AUDIO
Τ?
VCR
DVD
TIME
CABLE
STB
AUDIO
SPECIAL
Φ Prev.
4.
5.
Press the ΟΚ
or Φ
Repeatedly press
viewing.
Σλεεπ
button.
the ΜΕΝΥ button to return to normal TV
τιμερ
You don't have to remember to switch the set off before you go to
bed. The sleep timer automatically switches the set to standby after
the preset time elapses.
SLEEP
1.
2.
3.
4.
Press the ΜΕΝΥ button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select Sleep timer.
Press the Γ button and then Δ / Ε button to select a timer setting on the Sleep timer pull-down menu.
Press the ΟΚ or Φ button.
SETUP
SETUP
MENU
Auto
sleep
Sleep
timer
Off
Γ
10 Min
20 Min
PICTURE
30 Min
60 Min
AUDIO
AUDIO
ΟΚ
90 Min
120 Min
TIME
180 Min
240 Min
SPECIAL
SPECIAL
Φ Prev.
5.
Repeatedly
viewing.
press the ΜΕΝΥ button to return to normal TV
Press the ΣΛΕΕΠ button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90, 120,
180 and 240. The timer begins to count down from the number of
minutes selected.
play
Νοτε :
Το πιεω τηε ρεμαινινγ σλεεπ τιμε, πρεσσ τηε ΣΛΕΕΠ βυττον ονχε.
β. Το χανχελ τηε σλεεπ τιμε, ρεπεατεδλψ πρεσσ τηε ΣΛΕΕΠ βυττον
υντιλ τηε δισπλαψ Off αππεαρσ.
χ.
Ωηεν ψου σωιτχη τηε σετ οφφ, τηε σετ ρελεασεσ τηε πρεσετ σλεεπ τιμε.
α.
20
ΣΠΕΧΙΑΛ ΜΕΝΥ
Μαιν Πιχτυρε Σουρχε Σελεχτιον
SETUP
SETUP
Inputs can be set for TV, AV, Component or RGB-PC mode. AV mode
is used when a video cassette recorder (VCR), or other equipment is
connected to the set.
PIP
PICTURE
1.
2.
3.
Press the ΜΕΝΥ button and then Δ / Ε button to select the
SPECIAL menu.
Press the Γ button and then Δ / Ε button to select Main input.
Press the Γ button and then Δ / Ε button to select TV, AV1, AV2,
AV3, Component1, Component2 or RGB-DTV, RGB-PC.
input
input
Child lock
Language
AUDIO
Νοτε : Ωηεν α ?ΧΡ ισ χοννεχτεδ πια τηε αεριαλ σοχκετ τηε σετ ισ υσεδ
ιν Τ? μοδε. Σεε τηε TMΧοννεχτιον οφ εξτερναλ εθυιπμεντ∏ σεχτιον.
Main
Index
TIME
SPECIAL Γ
Τ?
VCR
SETUP
SETUP
Main
PICTURE
Child lock
PIP
input
input
Γ
TV
DVD
CABLE
AV1
STB
AV2
AUDIO
AV3
Language
AUDIO
AUDIO
Index
Component1
TV/AV
Component2
RGB-DTV
TIME
RGB-PC
SPECIAL
SPECIAL
1
23
4
56
7
89
Φ Prev.
AV1
AV2
AV3
4.
5.
VCR connected to the Α?1 ΙΝΠΥΤ sockets of the set
: VCR connected to the Α?2 ΙΝΠΥΤ sockets of the set
: VCR connected to the Α?3 ΙΝΠΥΤ sockets of the set
Component1/2 : DVD connected to the ΔΤ?/Δ?Δ ΙΝΠΥΤ sockets on the back of set
RGB-DTV/PC : PC connected to the ΠΧ/ΔΤ? ΙΝΠΥΤ sockets
on the back of set
Press the ΟΚ or Φ button.
Repeatedly press the ΜΕΝΥ button to return to normal TV viewing.
:
Alternatively you can select the TV, AV, Component
mode by pressing the Τ?/Α? button.
or
RGB-DTV/PC
0
PR
MENU
In AV, Component or RGB-DTV/PC mode, to return to TV mode,
press the ΠΡ +/- or NUMBER buttons.
ΟΚ
Χηιλδ Λοχκ
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
Press the ΜΕΝΥ button and then Δ / Ε button to select the
SPECIAL menu.
Press the Γ button and then Δ / Ε button to select Child lock.
Press the Γ button and then Δ / Ε button to select On or Off.
Repeatedly press the ΜΕΝΥ button to return to normal TV viewing.
With the lock on, the display Child lock On appears on the screen
if any button on the front panel is pressed while viewing the TV.
Νοτε : Τηε δισπλαψ Child lock On ωιλλ νοτ αππεαρ ον τηε σχρεεν ιφ
ανψ βυττον ον τηε φροντ πανελ ισ πρεσσεδ ωηιλε δισπλαψινγ τηε μενυσ.
21
ΣΠΕΧΙΑΛ ΜΕΝΥ
SETUP
SETUP
Main
PIP
PICTURE
input
input
Child lock
Language
AUDIO
ΛΕΔ ΔΙΣΠΛΑΨ
You
1.
Index
2.
TIME
3.
SPECIAL Γ
can
adjust
αδφυστμεντ
LED DISPLAY
to the levels you
brightness
prefer.
Press the ΜΕΝΥ button and then Δ / Ε button to select the
SPECIAL menu.
Press the Γ button and then Δ / Ε button to select Index.
Press the Γ button and then Δ / Ε button to select Off, Dark,
Normal or Bright.
Main
SETUP
PIP
PICTURE
input
input
Child lock
Τ?
VCR
Language
DVD
AUDIO
AUDIO
CABLE
Index
STB
Γ
Off
Dark
AUDIO
TIME
Normal
Bright
SPECIAL
Φ Prev.
ARC
4.
Repeatedly press
viewing.
the ΜΕΝΥ button to return to normal TV
Πιχτυρε φορματ
You can watch TV in various picture formats; 4:3, 16:9 (Wide),
Zoom and Auto.
You can repeatedly press the ΑΡΧ button to select your desired picture format.
4:3
Following selection will lead you to view a picture with an original
4:3 aspect ratio, with black bars appearing at both the left and right
sides.
MENU
16:9
ΟΚ
Following selection will lead you to adjust the picture horizontally, in
linear proportion, to fill the entire screen (useful for viewing 4:3
formatted DVDs).
a
Zoom
Following
selection will lead you to view the
alternation, while filling the entire
tom
portions
screen
up
or
screen.
picture
without any
However, the top and bot-
of the picture will be cropped. You
down with Δ / Ε button.
can
move
the
Auto
When your TV receives the wide screen signal (WSS), it will be automatically changed to the picture format to be sent.
Νοτε : Ψου αρε απαιλαβλε το 4:3 ανδ 16:9 ιν Χομπονεντ
ΡΓΒ-ΔΤ? (720π/1080ι) ανδ ΡΓΒ-ΠΧ μοδε.
22
(720π/1080ι),
Πιχτυρε Ιν Πιχτυρε
Οπτιον :
PIP (Picture
in
Picture) displays
a
picture
within
a
Φυνχτιον
(ΠΙΠ)
picture.
Ον ανδ οφφ
Press the ΠΙΠ button to switch on the sub picture.
Press ΕΞΙΤ button to switch it off.
Each press of ΠΙΠ/ΔΩ button button changes the screen
shown below.
display
as
Τ?
VCR
DVD
CABLE
STB
AUDIO
Νοτε
τυρε
: Ωηεν τηε συβ πιχτυρε σιζε ισ
θυαλιτψ μιγητ γετ ποορ.
Ινπυτ
1/2 οφ τηε μαιν
μοδε σελεχτιον φορ συβ
πιχτυρε, τηε πιχ-
πιχτυρε
Press the ΠΙΠ ΙΝΠΥΤ button to select the
input
mode for the sub
picture.
Each time this button is pressed, each
displayed as shown below.
input
mode for the sub
pic-
ture is
Programme
number
AV1
AV3
AV2
Νοτε : Ωηεν τηε ΠΙΠ φυνχτιον ισ σωιτχηεδ ον, ψου
ιν τηε Σπεχιαλ μενυ.
Σωαππινγ
βετωεεν μαιν ανδ συβ
Press the ΣΩΑΠ button to
Νοτε : Ωηεν τηε μαιν
απαιλαβλε.
Προγραμμε
exchange
πιχτυρε ισ
Τ?
αλσο
Α?
αδφυστ
ιτ
PIP/DW
πιχτυρεσ
the main and sub
ορ
σελεχτιον φορ συβ
χαν
pictures.
μοδεσ, τηε σωαππινγ ισ
PIP PR-
πιχτυρε
PIP INPUT
PIP PR+
SWAP
The sub picture programme selection is available when the sub picture is TV mode. Press the ΠΙΠ ΠΡ +/- buttons to select a programme for the sub picture.
Συβ
πιχτυρε
σιζε
Repeatedly press the ΣΙΖΕ button to select the desired sub picture
size. The sub picture appears as 1/9 size of the main picture, followed by 1/16.
Συβ
SIZE
STILL
πιχτυρε φρεεζε
Press the ΣΤΙΛΛ button to freeze motion of the sub
Press this button again to restore motion.
Συβ
POSITION
picture.
πιχτυρε ποσιτιον χηανγε
Press the ΠΟΣΙΤΙΟΝ button repeatedly until desired
achieved. The sub pictures move clockwise.
position
is
23
Τελετεξτ
Teletext
(οπτιον)
(or TOP text)
is
with the teletext system
Teletext is
a
grammes, share
information
prices
on
DVD
by
only
most TV stations which
news,
and many other
The teletext decoder of this TV
VCR
therefore
a
set
receive the teletext broadcast.
free service broadcast
up-to-the-minute
Τ?
optional function,
an
can
can
gives
weather, television pro-
topics.
support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corre-
CABLE
STB
AUDIO
sponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
TV/AV
Σωιτχη ον/οφφ
1
23
4
56
7
89
Press the ΤΕΞΤ button to switch to teletext.
If TV and text
0
TEXT
are
displayed
half and half of the screen,
the
displayed
headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the ΤΕΞΤ button to switch off teletext. The previous mode
on
PR
picture
press the ΤΕΞΤ button again to display text picture fully.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are
screen
reappears.
ΣΙΜΠΛΕ τεξτ
ΟΚ
Παγε
σελεχτιον
1.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-
2.
The
enter the correct page number.
Δ / Ε or ΠΡ +/- button can be used to select the
ing
24
or
following page.
preced-
Τελετεξτ
ΤΟΠ τεξτ
The
(οπτιον)
guide displays
user
(οπτιον)
the bottom of the
four fields-red, green, yellow and blue at
The yellow field denotes the next group
screen.
and the blue field indicates the next block.
Βλοχκ / γρουπ / παγε σελεχτιον
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with auto-
Τ?
VCR
DVD
CABLE
STB
matic overflow to the next block.
3.
Alternatively
4.
AUDIO
With the green button you can proceed to the next
page with automatic overflow to the next group.
The
red
the
Δ
button
Alternatively
the
or
ΠΡ
to
permits
Ε
or
ΠΡ
button
+
-
can
can
return
existing
be used.
to
previous
selection.
be used.
Διρεχτ παγε σελεχτιον
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
1
23
4
56
7
89
TOP mode.
0
PR
ΦΑΣΤΕΞΤ
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Παγε
1.
MENU
σελεχτιον
Press the
button to select the index page.
select the pages which are colour coded
tom line with the same coloured buttons.
i
2.
You
3.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
4.
The
can
along
the bot-
buttons in FASTEXT mode.
ing
Δ
or
/
Ε
or
ΠΡ +/- button
can
be used to select the
preced-
following page.
25
Τελετεξτ
Σπεχιαλ
(οπτιον)
τελετεξτ φυνχτιονσ
ΡΕ?ΕΑΛ
Press this button to display concealed information, such as
solutions of riddles or puzzles.
Press this button again to remove the information from the
display.
Τ?
VCR
DVD
ΣΙΖΕ
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the
CABLE
STB
AUDIO
page.
Press this button
1
23
4
56
7
89
0
again
to return to the normal
display.
ΥΠΔΑΤΕ
Displays the TV picture on the screen while waiting for the new
will appear at the top left hand
teletext page. The display
corner of the screen. When the updated page is available then
will change to the page number.
display
Press this button to view the
updated
teletext page.
ΗΟΛΔ
PR
Stops
the automatic page
change
which will
occur
if
a
tele-
text page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown
on the screen below the time. When this button is pressed
the stop symbol is displayed at the top left-hand corner of
the screen and the automatic page change is inhibited.
To continue press this button again.
ΜΙΞ
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV picture off press this button again.
Νοτε : Ωηεν Τ? ανδ τεξτ πιχτυρε αρε δισπλαψεδ ηαλφ ανδ ηαλφ
οφ τηε σχρεεν, ΜΙΞ φυνχτιον ισ νοτ απαιλαβλε.
ΤΙΜΕ
This button has two functions:
TV programme, press this button to disthe top right hand corner of the screen.
Press this button again to remove the display.
b) In teletext mode, press this button to select a sub page
number. The sub page number is displayed at the bottom
of the screen. To hold or change the sub page, press the
RED/ GREEN ΠΡ +/- or Δ / Ε buttons. Press this button
again to exit this function.
a) When viewing
play the time at
?
26
a
Χοννεχτιον οφ ΠΧ
ΠΧ ιν σοχκετ
1.
Connect the
cable from the monitor output socket of the
input socket of the set.
signal
R
PERSONAL COMPUTER to the PC
2.
Connect the audio cable from the PC to the ΠΧ/ΔΤ? ΙΝΠΥΤ
Γ
Ρ
Α
Δ
Ε
ΑΥΔΙΟ sockets
the back of the set.
on
L
PC/DTV INPUT
Υ
Π
Π
Ο
COMPONENT COMPONENT
INPUT 1
INPUT 2
RGB
576i/480i
(XGA/
576p/480p
720p/
5 6p/
480p/
720p/
1080i)
ΡΤ
1080i
576i/480i
576p/480p
720p/
1080i
Y
(L)
3.
Press the Τ?/Α?
or
ΜΥΛΤΙΜΕΔΙΑ button to select RGB-PC.
AUDIO
S-VIDEO
PB
(R)
PR
A/V 1
A/V 2
MONITOR
INPUT
INPUT
OUT
AUDIO
CENTER
4.
Switch
the PC, and the PC screen appears
The set can be operated as the PC monitor.
Νοτε
α.
on
on
the set.
VA
A U
R
I
A O
DI
B O
L U
E T
(L)
(L)
AUDIO
AUDIO
(R)
(L)
AUDIO
MONO
(R)
(R)
DTV/DVD INPUT
:
Χοννεχτ ΠΧ το τηε ΠΧ
ινπυτ
σοχκετσ οφ τηε σετ αφτερ
χηανγινγ
τηε ρεσολυτιον οφ ΠΧ.
β.
MODE IN
ΠΕΡΣΟΝΑΛ ΧΟΜΠΥΤΕΡ
Ιφ ψου ωαντ το ωατχη τηε ΠΧ μονιτορ ονλψ, σωιτχη οφφ τηε σετ ωιτη
τηε ΠΟΩΕΡ βυττον ον τηε ρεμοτε χοντρολ ηανδσετ. (Ιφ ψου
σωιτχη οφφ τηε σετ ωιτη τηε ΟΝ/ΟΦΦ βυττον ον τηε σετ, τηε σχρεεν
οφ τηε ΠΧ ισν∏τ
Δισπλαψαβλε
ΜΟΔΕ
δισπλαψεδ.)
Μονιτορ
Σπεχιφιχατιον
Ρεσολυτιον
Ηοριζονταλ
Φρεθυενχψ(ΚΗζ)
EGA
VGA
?ερτιχαλ
Φρεθυενχψ(Ηζ)
640x350
31.468
70.09
640x480
31.469
59.94
640x480
37.861
72.80
640x480
37.500
75.00
800x600
35.156
56.25
800x600
37.879
60.31
800x600
48.077
72.18
800x600
46.875
75.00
1024x768
48.363
60.00
1024x768
56.476
70.06
1024x768
60.023
75.02
SVGA
XGA
(Synchronization input
form
:
separate)
27
Χοννεχτιον οφ ΠΧ
SETUP
SETUP
Main
PIP
PICTURE
ΡΓΒ-ΠΧ Μοδε
input
iInput
1.
Child lock
ARC
AUDIO
2.
Language
3.
4.
TIME
5.
SPECIAL Γ
(οπτιον)
Press the ΜΕΝΥ button and then Δ / Ε button to select the
SPECIAL menu.
Press the Γ button and then Δ / Ε button to select Main Input.
Press the Γ button and then Δ / Ε button to select RGB-PC.
Press the ΕΞΙΤ button to return to normal viewing.
Press the ΟΚ button and then Δ / Ε button to select the
desired picture item.
RGB-PC
Τ?
Adjust
H-Position
0
V-Position
0
H-Size
0
VCR
DVD
CABLE
STB
V-Size
0
Phase
-15
AUDIO
ΔΕ
6.
Press the
Φ
/
Γ
Select
ΦΓ
Exit
Adjust
button to make
appropriate adjustments.
H-Position / V-Position
This function is to adjust picture to
1
23
4
56
7
89
H-Size / V-Size
This function is to
0
you
left/right
and
up/down
as
you
prefer.
adjust picture
size to
enlarges
or
reduces
as
prefer.
Phase
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
Νοτε : Σομε σιγναλ φρομ σομε γραπηιχσ βοαρδσ μαψ νοτ φυνχτιον προπερλψ. Ιφ τηε ρεσυλτσ αρε υνσατισφαχτορψ, αδφυστ ψουρ μονιτορ∏σ ποσιτιον, σιζε ανδ πηασε μανυαλλψ.
EXIT
MENU
7.
ΟΚ
28
Press the ΟΚ button to store it for the PC monitor
picture.
Χοννεχτιον οφ εξτερναλ
You
can
connect additional
equipment,
such
as
εθυιπμεντ
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
Αεριαλ σοχκετ
R
L
PC/DTV INPUT
ΥΠ
1.
Connect the RF out socket of the VCR to the aerial socket
Γ
Ρ
Α
on
ΔΕ
ΠΟ
ΡΤ
COMPONENT COMPONENT
INPUT 1
INPUT 2
RGB
576i/480i
576i/480i
(XGA/
576p/
480p/
720p/
576p/480p
720p/
576p/480p
720p/
1080i
1080i
1080i)
Y
(L)
the back of the set.
S-V DEO
PB
AUDIO
(R)
A/V 1
INPUT
PR
2.
3.
4.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel
desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
on a
A/V 2
INPUT
MONITOR
OUT
AUDIO
CENTER
MODE IN
VA
A U
R
I
A O
B O
L U
E T
DI
(L)
(L)
AUDIO
AUDIO
(R)
(L)
AUDIO
MONO
(R)
(R)
DTV/DVD INPUT
VCR
stored.
5.
Press the ΠΛΑΨ button
Αυδιο/?ιδεο
on
the VCR.
AV3
ινπυτ σοχκετσ
INPUT
S-VIDEO
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
2.
3.
(L)/
AUDIO MONO
Press the Τ?/Α? button to select AV1, AV2
Press the ΠΛΑΨ button on the VCR.
The VCR
VIDEO
playback picture appears
on
the
or
AV3.
(R)
SIDE A/V
screen.
VCR
Ιφ ψου ηαπε α μονο ?ΧΡ, χοννεχτ τηε αυδιο χαβλε φρομ τηε
?ΧΡ το τηε AUDIO (L)/MONO σοχκετ οφ τηε σετ.
Νοτε
:
Σ-?ιδεο / Αυδιο
AV3
ινπυτ σοχκετσ (οπτιον)
INPUT
S-VIDEO
When connecting an VCR to the S-VIDEO socket, the
ity will be further improved.
picture qual
VIDEO
(L)/
AUDIO MONO
1.
2.
3.
4.
Connect the S-video socket of the VCR to the Σ-?ΙΔΕΟ socket
of the set.
Connect the audio cable from the VCR to the AUDIO sockets of
the Α?2 or Α?3 ΙΝΠΥΤ.
Select AV3 by pressing the Τ?/Α? button repeatedly.
Press the ΠΛΑΨ button on the VCR.
The VCR playback picture appears on the screen.
Νοτε
:
(R)
SIDE A/V
VCR
Ιφ βοτη Σ-?ΙΔΕΟ ανδ ?ΙΔΕΟ σοχκετσ ηαπε βεεν χοννεχτεδ
το τηε ?ΧΡ
σιμυλτανεουσλψ, ονλψ
τηε Σ-?ΙΔΕΟ
χαν
βε ρεχειπεδ.
29
Χοννεχτιον οφ εξτερναλ
Δ?Δ
R
L
PC/DTV INPUT
ΥΠΓ
RGB
(XGA/
576p/
480p/
720p/
ΡΑΔΕ
Π
Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y
or Y PB PR) of the DVD to the ΔΤ?/Δ?Δ ΙΝΠΥΤ sockets (Y PB
2.
Connect the audio cable from the DVD to ΔΤ?/Δ?Δ ΙΝΠΥΤ
INPUT 2
576i/480i
576i/480i
576p/480p
720p/
576p/480p
720p/
1080i
1080i
PR)
1080i)
Ο
Ρ
Τ
Y
(L)
S-VIDEO
PB
AUDIO
ινπυτ σοχκετσ
1.
COMPONENT COMPONENT
INPUT 1
(R)
PR
A/V 1
A/V 2
MONITOR
INPUT
INPUT
OUT
εθυιπμεντ
of the set.
AUDIO
CENTER
MODE IN
VA
A U
R
I
A O
B O
L U
E T
DI
ΑΥΔΙΟ sockets of the set.
(L)
(L)
(L)
AUDIO
AUDIO
MONO
AUDIO
(R)
(R)
(R)
3.
DTV/DVD INPUT
Press
Τ?/Α?
the
Component
DVD
4.
R
ΔΤ?
L
or
ΜΥΛΤΙΜΕΔΙΑ
or
Component
Press the ΠΛΑΨ button
The DVD
PC/DTV INPUT
1
on
button
to
select
2.
the DVD.
playback picture appears
on
the
screen.
ινπυτ σοχκετσ
COMPONENT COMPONENT
INPUT 1
INPUT 2
Υ
Π
Γ
Ρ
Α
Δ
Ε
Π
Ο
RGB
576i/480i
576i/480i
(XGA/
576p/
480p/
720p/
576p/480p
720p/
576p/480p
720p/
1080i
1080i
1.
1080i)
ΡΤ
(Y
S-VIDEO
PB
AUDIO
(R)
A/V 1
INPUT
PR
A/V 2
INPUT
MONITOR
OUT
AUDIO
CENTER
(L)
(L)
RI DIO
AUDIO
AUDIO
A
B O
L U
E T
(R)
(L)
MONO
AUDIO
(R)
(R)
DTV/DVD INPUT
2.
SET TOP
PB
PR)
of the set.
Box
Connect the audio cable from the SET TOP to the ΔΤ?/Δ?Δ
Press
Τ?/Α?
the
or
ΜΥΛΤΙΜΕΔΙΑ
Component 1, Component 2
RGB-DTV
COMPONENT COMPONENT
INPUT 1
Γ
Ρ
Α
ΔΕ
ΠΟΡΤ
or
button
to
select
RGB DTV
Adjust
L
PC/DTV INPUT
ΥΠ
with the D-Sub
ΙΝΠΥΤ ΑΥΔΙΟ sockets of the set.
3.
R
ΙΝΠΥΤ sockets
output socket to ΡΓΒ ΙΝΠΥΤ socket on the set and audio cable
of the HD-SET TOP to the AUDIO sockets of ΡΓΒ ΙΝΠΥΤ.)
MODE IN
VA
A U
inputs to the ΔΤ?/Δ?Δ
(or, connect the SET TOP
Connect the SET TOP
Y
(L)
576i/480i
576i/480i
576p/480p
720p/
576p/480p
720p/
1080
0
V-Position
0
Phase
0
INPUT 2
RGB
(XGA/
576p
480p/
720p/
1080i
H-Position
1080i
)
Y
(L)
AUDIO
S-VIDEO
PB
(R)
A/V 1
INPUT
PR
A/V 2
INPUT
MONITOR
OUT
AUDIO
CENTER
MODE N
VA
A U
RIA DI
O
B O
L U
E T
ΔΕ
(L)
(L)
AUDIO
AUDIO
(R)
(L)
AUDIO
MONO
4.
DTV/DVD INPUT
5.
SET TOP
Box
ΦΓ
Adjust
Exit
Press the ΟΚ button.
Press the Δ / Ε button to select H-Position, V-Position
Phase.
6.
30
Select
(R)
(R)
Press the
Φ
/
Γ
button to make
appropriate adjustments.
or
Τρουβλεσηοοτινγ
χηεχκ λιστ
Σψμπτομσ
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Poor
brightness
Strange
sound from inside the monitor
Χηεχκ τηεσε ιτεμσ ανδ τρψ το
αδφυστ τηεσε
The mains
plug-(plugged
in and switched
on)
Is the TV switched on?
Try
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Contact LG service
A
change
provider(s)
in ambient
ture may result in
(VCR only)
humidity
or
tempera-
unusual noise at the
time of switching off or on of the monitor and
does not indicate a fault with the monitor
an
31
Download PDF