LG | RT-54NA62RB | LG RT-54NA62RB Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0380A
(MP02AB,
092S
cover
require
TX)
a
and
quote this infor-
service.
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic
7
operation
Programme selection
Volume adjustment / Quick view
On and off /
Mute function / Auto Demonstration
On
On
screen
language
selection
(option)
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
9
Setting
Fine
tuning
/
Programme
edit
Favourite programme
Calling the programme table
Picture
PSM
14
adjustment
(Picture Status Memory)
Picture adjustment / 3D comb filter
Auto convergence / Turbo picture selection
Sound
adjustment
(Sound Status Memory)
SSM
17
/ Sound
adjustment
Turbo sound selection / Sound
output selection
Stereo/Dual
reception (option)
Time
reception
/ NICAM
20
setting
Clock / Off time / On time
Auto
sleep
Other functions
TV and AV modes / Child lock
Picture format / Sleep timer
22
PIP
24
operation (option)
Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
On and off /
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
25
Connection of PC
PC in socket / RGB-PC OUTPUT in socket
RGB-PC mode (option)
28
Connection of external equipment
Aerial socket
Audio/Video in sockets
S-video/Audio in sockets (S-AV) (option)
Component in sockets
DTV in sockets / Monitor out sockets
30
Troubleshooting
2
check list
Back
cover
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms
ial and mains
or
powercuts, please pull
out the aer-
plugs.
Warning
To prevent fire
moisture.
or
shock hazard, do not expose the set to rain
or
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
For the best
cover.
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
the
set is
in
a position to allow a free flow
openings on the back cover.
place the set on a sloping or unstable
placed
of air. Do not
cover
the ventilation
Do not
on
the bottom of the set may
cause
it to
move
area as
the casters
and to be
damaged.
When displaying still pictures such as videogames, 16:9 picture format, PIP display, and station label for a long time, the image may
be persisted on the screen.
Manufactured under license from Dolby Laboratories. "Dolby",
"Pro Logic" and the double-D symbol are trademarks of Dolby
Laboratories.
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Remote control handset
POWER
1
I/II
2
TV/AV
11
TURBO
SOUND
Before you use the remote control handset,
teries. See the next page.
1.
PICTURE
12
3
PIP
FPR
13 2.
4
PR-
PR+
SWAP
INPUT
5
MENU
PR
MUTE
VOL
OK
456
8
PSM
0
SSM
POSITION
SCAN
STILL
SLEEP
LIST
15
SIZE
5.
returns to the
17 6.
18
STOP
10
P/STILL
PLAY
language
MENU
selects
FF
pictures.
previously
viewed programme.
a menu.
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
Φ / Γ (Volume Up/Down)
adjusts the volume.
adjusts
OK
menu
settings.
accepts your selection
8.
9.
or
NUMBER BUTTONS
switches the set on from
PSM (Picture Status
recalls your preferred
displays
standby
the current mode.
or
directly
Memory)
picture setting.
10. VCR BUTTONS
control a LG video cassette recorder.
4
broadcast.
REC
7.
REW
standby.
SWAP
16
HD-DAC
install the bat-
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
SCAN
switches on or off the programme scan mode 12 sub
123
9
I/II
selects the language during dual
selects the sound output.
off to
or
PIP BUTTONS
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
PR
9
standby
4.
VOL
8
from
TURBO SOUND BUTTON
selects Turbo sound.
7
7
on
3.
14
6
POWER
switches the set
please
select
a
number.
Location and function of controls
11. TV/AV
selects TV or AV mode.
switches the set on from
standby.
12. TURBO PICTURE BUTTON
selects Turbo picture.
POWER
1
13. FPR (Favourite Programme Review)
selects stored favourite programmes.
I/II
2
TV/AV
SOUND
14. MUTE
PICTURE
12
3
switches the sound
on or
off.
PIP
FPR
13
4
PR-
15. SSM (Sound Status Memory)
recalls your preferred sound setting.
11
TURBO
PR+
SWAP
INPUT
5
16. LIST
MENU
displays
17. SLEEP
sets the
sleep
PR
MUTE
14
6
the programme table.
timer.
VOL
OK
VOL
7
18. HD-DAC
adjusts the colour convergence of
receiving the signals.
screen
automatically during
Note : In teletext mode, the PR +/-, SWAP and INPUT buttons
used for teletext function.
Battery
PR
are
installation
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
SCAN
STILL
SLEEP
LIST
8
The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and 9
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
15
-
SIZE
16
HD-DAC
17
18
STOP
10
REW
P/STILL
PLAY
REC
FF
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Front
?
panel
RT-44/49/54NA12 series
2
TV/AV
TV/AV
1
MENU
OK
VOL
MENU
OK
VOL
PR
PR
POWR
3456
7
8
S-VIDEOL/MN
10
AUDIO
R
AV3
?
RT-44/49/54NA62 series
(Side panel)
2
TV/AV
TV/AVMENU
1
OK
MUTE
VOL
MAIN POWER
switches the set
TV/AV
selects TV or AV mode.
switches the set on from
standby.
9.
OK
or
displays
the current
mode.
7.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
mode.
8
Φ / Γ
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
Δ / Ε (Programme Up/Down)
standby
(Light Emitting Diode) DISPLAY
displays the selected input signals.
Option : Only RT-44/49/54NA62 series,
: PAL/SECAM input signal indicator
: STEREO sound indicator
: SLEEP timer indicator
: CHILD LOCK setting indicator
: NTSC, DTV or PC input signal indicator
MUTE
switches the sound
on or
off.
10. AUDIO/VIDEO IN SOCKETS (AV3)
Connect the audio/video out sockets of external equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-AV)
Connect the video out socket of an S-VIDEO
VCR to the S-VIDEO socket.
Connect the audio out sockets of the SVIDEO VCR to the audio sockets as in AV3.
LED
PAL
gressive
STEREO
SLEEP
LOCK
6
PR
selects a programme or a menu item.
switches the set on from standby.
a menu.
accepts your selection
6.
VOL
3549
off.
3.
MENU
selects
6
8.
on or
REMOTE CONTROL SENSOR
5.
MUTE
PR
2.
4.
MENU
ON/OFF
7
1.
OK
*
CASTERS (on the bottom)
turn and move the set
easily.
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε, TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You can select
buttons.
a
Volume
programme number with the Δ / Ε
or
NUMBER
adjustment
Press the Φ / Γ button to
adjust
the volume.
Quick view
Press the SWAP button to view the last programme you
were
watching.
Mute function
Press the MUTE button. The sound is switched off and the
W appears.
You can cancel it
SOUND button.
by pressing
the MUTE, Φ
display
/ Γ, I/II, TURBO
Auto Demonstration
To review all the menus programmed in the set, press the OK button of the front panel control for about 10 seconds. To stop auto
demonstration, press any button of the front panel control and
POWER button of the remote control.
On
screen
language
selection
The menu can be displayed
First select your language.
1.
2.
3.
on
the
(option)
screen
in desired
language.
Press the MENU button and then Δ / Ε button to select the
Special
menu.
Press the Γ button and then Δ / Ε button to select Language.
Press the Γ button and then Δ / Ε button to select your desired
language.
4.
All the on screen displays will appear in the selected language.
Press the OK or Φ button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
viewing.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.
Press the MENU button and then Δ / Ε button to
display
each
menu.
3.
Press the Γ button and then Δ / Ε button to select a menu
item.
Press the Γ button to display the sub menu or the pull-down
4.
Change
2.
menu.
the
setting
of
an
Φ/ΓorΔ/Ε.
item in the sub
or
pull-down
menu
with
can move to the higher level menu with OK or Φ button and
to move to the lower level menu press the Γ button
You
Note :
In AV modes, if you adjust the Station menu, AV modes return
a.
to the TV mode.
b. In the teletext mode, menus are not displayed.
In some models, the Language will not display.
c.
Station
Picture
Auto programme
Manual programme
Programme
edit
Favourite programme
PSM
Γ
Contrast
Γ
Γ
Brightness
Γ
Γ
Colour
Γ
Sharpness
Γ
3D comb filter
Γ
Auto convergence
Γ
Γ
Γ
ΔΕOΦ ΓOOKOMENU
ΔΕOΦ ΓOOKOMENU
Station
Picture
menu
menu
Sound
SSM
Γ
AVL
Γ
Balance
Γ
ΔΕOΦ ΓOOKOMENU
Sound
Time
Special
Input
Language
Γ
Clock
Γ
Γ
Off time
Γ
Child lock
Γ
On time
Γ
Γ
Auto
Γ
Screen
ΔΕOΦ ΓOOKOMENU
Special
8
menu
menu
sleep
ΔΕOΦ ΓOOKOMENU
Time
menu
Setting up
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the Δ / Ε
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
some
models up to 200 TV stations
Auto programme
can
Station
Auto programme
Manual programme
Programme
edit
Favourite programme
Γ
Γ
Γ
Γ
be stored.
ΔΕOΦ ΓOOKOMENU
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
Press the MENU button and then Δ / Ε button to select the
Station menu.
Press the Γ button and then Δ / Ε button to select Auto pro-
gramme.
Auto programme
System
Storage
Γ
from
Start
Γ
BGI
Γ
DK
M
ΔΕOΦ ΓOOKOMENU
3.
4.
5.
6.
7.
8.
9.
Press the Γ button to display the Auto programme menu.
Press the Γ button. Select a TV system with the Δ / Ε button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or Φ button.
Press the Δ / Ε button to select Storage from.
Press the Γ button. Select the beginning programme number
with the Φ / Γ button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the Δ / Ε button to select Start.
Auto programme
System
Storage
Start
Γ
from
Γ
Γ
-----(BG)
7
45%
MENU
10. Press the Γ button to begin auto programming.
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
9
Setting up
Station
Manual programme
Auto programme
Manual programme
Programme
TV stations
edit
Favourite programme
Γ
Γ
Γ
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
ΔΕOΦ ΓOOKOMENU
tuning
Γ
2.
3.
Press the MENU button and then Δ / Ε button to select the
Station menu.
Press the Γ button and then Δ / Ε button to select Manual
programme.
Press the Γ button to display the Manual programme menu.
Manual programme
Storage
System
Γ
Channel
Γ
5
Γ
Fine
Γ
Search
Γ
Name
Γ
Booster
Γ
ΔΕOΦ ΓOOKOMENU
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Press the Δ / Ε button to select Storage.
Press the Γ button to select the programme number. Select the
desired programme number (0 to 99) with the Φ / Γ button or
NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it,
i.e. '05' (or '005') for 5.
Press the OK button.
Press the Δ / Ε button to select System.
Press the Γ button. Select a TV system with the Δ / Ε button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or Φ button.
Press the Δ / Ε button to select Channel.
Press the Γ button. Press the Δ / Ε button to select V/UHF or
Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or Φ button
Press the Δ / Ε button to select Search.
Press the Γ button. Press the Φ / Γ button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
Manual programme
Storage
System
Γ
Channel
Γ
Fine
Γ
Search
Γ
Name
Γ
Booster
Γ
Γ
ΓΓΓ
Stored
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
10
TV stations
Setting up
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
2.
3.
4.
5.
6.
7.
Station
1 to 3.
Press the Δ / Ε button to select Name.
Press the Γ button on the Name pull-down menu.
Press the Δ button. You can use a blank, +, -, the numeric 0 e to
9 and the alphabet A to Z.
With the Ε button you can select in the opposite direction.
Select the position by pressing the Φ / Γ button and then take
your choice of the second character, and so on.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
Auto programme
Manual programme
Programme
edit
Favourite programme
Γ
Γ
Γ
Γ
ΔΕOΦ ΓOOKOMENU
viewing.
Booster
In some models, Booster is an optional function.
Booster can perform this function.
Only
a
set with
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
1.
2.
3.
4.
the 'Manual programme tuning' steps 1 to 3.
Press the Δ / Ε button to select Booster.
Press the Γ button.
Press the Δ / Ε button to select On or Off on the Booster
Repeat
pull-down
5.
6.
Repeatedly
viewing.
Fine
or Φ
button.
the
MENU button to return to normal TV
press
tuning
Normally
1.
2.
3.
menu.
Press the OK
fine
tuning
is
only necessary
if
reception
is poor.
the 'Manual programme tuning' steps 1 to 3.
Press the Δ / Ε button to select Fine.
Press the Γ button.
Repeat
Manual programme
Storage
System
Γ
Channel
Γ
Fine
Γ
Search
Γ
Name
Γ
Booster
Γ
Γ
ΓΓΓ
Φ ΓOOKOMENU
4.
5.
6.
Press the Φ / Γ button to fine tune for the best picture and
sound on the Fine pull-down menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will
during programme selection.
be indicated
by yellow
number
11
Setting up
Station
Auto programme
Manual programme
Programme
edit
Favourite programme
Programme
edit
Γ
Γ
Γ
Γ
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
ΔΕOΦ ΓOOKOMENU
TV stations
2.
3.
Press the MENU button and then Δ / Ε button to select the
Station menu.
Press the Γ button and then Δ / Ε
button to select
Programme edit.
Press the Γ button to display the Programme edit menu.
Programme
0
1
2
3
4
edit
5C05
-----
6
-----
7
-----
8
-----
9
-----
Delete
-----
-----
-----
-----
Copy
Skip
Move
ΔΕΦ ΓOOKOMENU
Deleting
1.
2.
a programme
Select a programme to be deleted with the Δ / Ε or Φ / Γ button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Copying
1.
2.
a programme
Select a programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
or Φ
one
/ Γ button.
position.
Moving
1.
2.
3.
a programme
Select a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
Programme
0
1
2
3
4
again
to release this function.
edit
-----
-----
-----
-----
-----
5C05
6
7
8
9
-----
-----
-----
-----
Move Off
ΔΕΦ ΓOMENU
a programme number
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
Skipping
1.
2.
3.
gramme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Repeatedly press
12
the MENU button to return to normal TV
viewing.
Setting up
TV stations
Station
Favourite programme
This function lets you select your favourite programmes
1.
2.
Press the MENU button and then Δ / Ε button to select the
Station menu.
Press the Γ button and then Δ / Ε button to select Favourite
programme.
3.
directly.
Press the
Γ
button to
display
Programme
edit
Favourite programme
Γ
Γ
Γ
Γ
the Favourite programme
ΔΕOΦ ΓOOKOMENU
Favourite programme
Auto programme
Manual programme
Programme
Auto programme
Manual programme
Γ
Γ
edit
Γ
Favourite programme
Γ
---
-----
---
-----
---
-----
---
-----
---
-----
Φ Γ 0-9 ΔΕOOKOMENU
menu.
4.
5.
6.
7.
8.
Press the Δ / Ε button to select
-----.
Select a desired programme with the Φ / Γ button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
To store another programme, repeat steps 4 to 5.
You can store up to 5 programmes.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
--
viewing.
Repeatedly
press the FPR button to select stored favourite pro-
grammes.
Calling
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
Displaying
Station
0
1
2
3
4
-----
-----
-----
-----
-----
5C05
6
7
8
9
-----
-----
-----
-----
ΔΕΦΓOOKOMENU
table contains ten programmes as below.
Note :
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
Select a programme with the Δ / Ε or Φ / Γ button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
Paging through a programme table
are 10 (or 20) programme table pages in which contain 100
(or 200) programmes.
Pressing the Δ / Ε or Φ / Γ button repeatedly turns the pages.
There
Repeatedly
press the MENU button to return to normal TV
viewing.
13
Picture
Picture
PSM
PSM
Γ
Contrast
Γ
Brightness
Γ
Colour
Γ
Sharpness
Γ
3D comb filter
Γ
Auto convergence
Γ
1.
2.
3.
adjustment
(Picture Status Memory)
Press the MENU button and then Δ / Ε button to select the
Picture menu.
Press the Γ button and then Δ / Ε button to select PSM.
Press the Γ button and then Δ / Ε button to select a picture
setting on the PSM pull-down menu.
Picture
ΔΕOΦ ΓOOKOMENU
PSM
Γ
Dynamic
Contrast
Γ
Standard
Brightness
Γ
Mild
Colour
Γ
Game
Sharpness
Γ
User
3D comb filter
Γ
Auto convergence
Γ
ΔΕOΦOOKOMENU
4.
5.
Press the OK
Repeatedly
viewing.
You
or Φ
button.
press the MENU button to return to normal TV
also recall
a desired picture (Dynamic, Standard,
User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for good picture reproduction at the factory and cannot be changed.
can
Mild, Game
Picture
You
can
ness
1.
2.
or
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
Press the MENU button and then Δ / Ε button to select the
Picture menu.
Press the Γ button and then Δ / Ε button to select the desired
picture item.
Picture
PSM
Contrast
Γ
Γ
Brightness
Γ
Colour
Γ
Sharpness
Γ
3D comb filter
Γ
Auto convergence
Γ
100
ΔΕOΦ ΓOOKOMENU
3.
4.
Press the Γ button.
Press the Φ / Γ button to make
appropriate adjustments
each sub menu.
You can also select other Picture items
directly
Contrast
on
the
with Δ / Ε but85
Φ Γ ΔΕOOKOMENU
adjust them with Φ / Γ button.
Press the OK button to store it for the picture.
Repeatedly press the MENU button to return to normal TV
ton and
5.
6.
viewing.
Note
14
:
Only
Contrast and
Brightness
are
displayed
in PC mode.
Picture
3D comb filter
(TV and
AV mode
adjustment
Picture
only)
This function lets you to adjust the colours of the
ing receiving the signals.
screen
clearly
dur-
1.
Press the MENU button and then Δ / Ε button to select the
Picture menu.
2.
Press the Γ button and then Δ / Ε button to select 3D comb
PSM
Γ
Contrast
Γ
Brightness
Γ
Colour
Γ
Sharpness
Γ
3D comb filter
Γ
Auto convergence
Γ
ΔΕOΦ ΓOOKOMENU
filter.
3.
Press the Γ button and then Δ / Ε button to select Auto
on the 3D comb filter pull-down menu.
or
Off
Picture
PSM
Γ
Contrast
Γ
Brightness
Γ
Colour
Γ
Sharpness
Γ
3D comb filter
Γ
Auto
Auto convergence
Γ
Off
ΔΕOΦOOKOMENU
or Φ
4.
Press the OK
5.
Repeatedly press
viewing.
Note
a.
the MENU button to return to normal TV
:
The 3D comb filter isn't suitable to
casting signal
b.
button.
and 1/2 main
If you select Auto
screen
picture
use
in
case
of
no
broad-
mode.
the 3D comb filter pull-down menu, the
of the set might be unstable for the nonce.
on
15
Picture
Picture
adjustment
Auto convergence
PSM
Γ
Contrast
Γ
Brightness
Γ
This function enables you to
Colour
Γ
screen
Sharpness
Γ
3D comb filter
Γ
Auto convergence
Γ
ΔΕOΦ ΓOOKOMENU
adjust the colour convergence of
automatically during receiving the signals. When the set is
first installed or it is relocated, the picture may be unstable with
three colour ghosts (red, green, blue). This problem can be solved
by adjusting the colour convergence.
1.
2.
Press the MENU button and then Δ / Ε button to select the
Picture menu.
Press the Γ button and then Δ / Ε button to select Auto con-
vergence.
Auto convergence
Position Checking
DATA
3.
Press the Γ button to
:
adjust
52
the colour convergence
Note :
a.
The Auto convergence isn't suitable to
b.
c.
use
in
automatically.
case
of no broad-
casting signal.
The Auto convergence function will be operated about 40 seconds.
The colour of operating point will be changed in order of 'blue-
green-red'.
d.
e.
f.
Make the surrounding illumination dark when the screen is
unstable or the message "The End" and "Ensure lights are
dimmed sufficiently" are displayed on screen after operating Auto convergence. The Auto convergence will then have to
be operated again.
This function will be operated after about 20 minutes from
switching the set on.
Adjust the Auto convergence according to a broadcasting system (50Hz or 60Hz) each.
You can also adjust Auto convergence with HD-DAC button on
the remote control. Press the HD-DAC button and then Γ button to
begin the colour convergence automatically.
Turbo
picture
selection
When this function is on, picture will be more brilliant and distinct
picture than normal picture. You can enjoy the Turbo picture so
much better than normal picture.
Repeatedly press the TURBO PICTURE button to switch on or off.
(Turbo Picture off)
16
(Turbo Picture on)
Sound
SSM
You
adjustment
Sound
(Sound Status Memory)
select your preferred sound setting; Dolby Virtual, Flat,
Music, Speech, or Movie and you can also adjust the sound frequency of equalizer.
1.
2.
3.
can
Press the MENU button and then Δ / Ε button to select the
Sound menu.
Press the Γ button and then Δ / Ε button to select SSM.
Press the Γ button and then Δ / Ε button to select a sound setting on the SSM pull-down menu.
SSM
Γ
AVL
Γ
Balance
Γ
ΔΕOΦ ΓOOKOMENU
Sound
SSM
Γ
Dolby
AVL
Γ
Flat
Balance
Γ
Music
Virtual
Speech
Movie
User
Γ
ΔΕOΦOOKOMENU
Dolby Virtual
Dolby Virtual lets you experience panoramic
Sound Frequency Adjustment
a. Press the Γ button in User to
display
0.1
0.5
effects of sound.
the User sub
1.5
5.0
menu.
10KHz
ΔΕOΦ ΓOOKOMENU
b. Select a sound band by pressing the Φ / Γ button.
c. Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
Repeatedly press the MENU button to return to normal TV viewing.
You
can also recall a desired sound (Dolby Virtual, Flat, Music,
Speech, Movie or User) with SSM button on the remote control.
The sound Dolby Virtual, Flat, Music, Speech and Movie are
programmed for optimum sound reproduction at the factory and
cannot be changed.
If you press the SSM button after making appropriate adjustthe User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Dolby Virtual, Flat, Music, Speech, or Movie.
Note
:
ment on
17
Sound
Sound
Sound
SSM
Γ
AVL
Γ
Balance
Γ
You
adjustment
adjustment
adjust
matically keeps
can
balance
on an
or
AVL
equal
(Auto Volume Leveler). AVL autovolume level even if you change pro-
grammes.
1.
ΔΕOΦ ΓOOKOMENU
2.
3.
Press the MENU button and then Δ / Ε button to select the
Sound menu.
Press the Γ button and then Δ / Ε button to select the desired
sound item; Balance or AVL.
Make desired adjustment with the Φ / Γ, Δ / Ε or OK button
on each pull-down menu.
Sound
SSM
Γ
AVL
Γ
Balance
ΓOn
Off
ΔΕOΦOOKOMENU
4.
Repeatedly press
viewing.
the MENU button to return to normal TV
Turbo sound selection
When this function is on, sound will be more emphasized and
amplified sound than normal sound. You can enjoy the Turbo
Sound so much better than normal Sound.
Repeatedly press the TURBO SOUND button to switch on or off.
MEGA TURBO
(Turbo Sound off)
Note
18
:
The Turbo Sound isn't suitable to
(Turbo Sound on)
use
Dolby
Virtual.
Sound
adjustment
Sound output selection
In AV mode, you
can
select output sound for the left and
right
loud-
speakers.
Repeatedly press the I/II button to select the sound output.
:
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L : Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
L+R
Stereo/Dual
reception
When
a programme is selected, the sound information for the station
appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
selection for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
Language
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
19
Time
Time
setting
Clock
Clock
Γ
Off time
Γ
On time
Γ
Auto
Γ
sleep
1.
2.
3.
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select Clock.
Press the Γ button and then Δ / Ε button to adjust hour.
Time
ΔΕOΦ ΓOOKOMENU
Clock
Γ
Off time
Γ
On time
Γ
Auto
Γ
sleep
01 :06 AM
ΔΕOΦOOKOMENU
4.
5.
6.
Press the Γ button and then Δ / Ε button to adjust minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
Off time
By using this function in On mode, the set automatically switches
off at a preset time. You must set the time correctly before using off
time function.
1.
2.
3.
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select Off time.
Press the Γ button and then Δ / Ε button to adjust hour.
Time
Clock
Γ
Off time
Γ
07 :00 AM
On time
Γ
Off
Auto
Γ
sleep
ΔΕOΦ ΓOOKOMENU
4.
5.
6.
Press the Γ button and then Δ / Ε button to adjust minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
20
Time
setting
Time
On time
this function in On mode, the set automatically switches
on at a preset time with desired program number and volume. You
must set the time correctly before using on time function.
By using
1.
2.
3.
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select On time.
Press the Γ button and then Δ / Ε button to adjust hour.
Clock
Γ
Off time
Γ
On time
Γ
Auto
Γ
sleep
ΔΕOΦ ΓOOKOMENU
Time
Clock
Γ
Off time
Γ
On time
Γ
01 :00 AM
Auto
Γ
Pr.
sleep
Vol.
3
30
On
ΔΕOΦ ΓOOKOMENU
4.
5.
6.
7.
8.
Press
Press
Press
Press
the
the
the
the
Γ button and then Δ / Ε button to
Γ button and then Δ / Ε button to
Γ button and then Δ / Ε button to
adjust
adjust
adjust
minute.
Pr..
Vol..
OK button.
the MENU button to return to normal TV
Repeatedly press
viewing.
Auto
sleep
If you select On on the Auto sleep pull-down menu, the set will
switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
automatically
1.
2.
3.
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select Auto sleep.
Press the Γ button and then Δ / Ε button to select On or Off on
the Auto sleep pull-down menu.
Time
Clock
Γ
Off time
Γ
On time
Γ
Auto
ΓOn
sleep
Off
ΔΕOΦOOKOMENU
4.
Repeatedly press
viewing.
the MENU button to return to normal TV
Note :
a.
This functions work only in standby mode.
b. If you adjust hour or minute on the on/off time menu, automatically on/off time is changed to On.
c.
To cancel the set's on/off time, set the on/off time to Off.
d.
To view the remaining on/off time, select the Time menu.
e.
When you switch the main power off, the Clock is reset.
21
Other functions
Special
TV and AV modes
Input
Language
Γ
Child lock
Γ
Screen
Γ
Γ
Inputs
can
be set for TV
cassette recorder
or
(VCR),
AV mode. AV mode is used when
or
other
equipment
a video
is connected to the set.
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
ΔΕOΦ ΓOOKOMENU
1.
Press the MENU button and then Δ / Ε button to select the
Special
2.
3.
menu.
Press the Γ button and then Δ / Ε button to select Input.
Press the Γ button and then Δ / Ε button to select TV, AV1,
AV2, AV3, COMPONENT1, COMPONENT2, RGB-DTV or
RGB-PC on the Input pull-down menu.
Special
Input
Language
Γ
TV
Γ
AV1
Child lock
Γ
AV2
Screen
Γ
AV3
COMPONENT1
COMPONENT2
RGB-DTV
RGB-PC
ΔΕOΦOOKOMENU
4.
VCR connected to the AV1 sockets on the set
VCR connected to the AV2 sockets on the set
AV 3 : VCR connected to the AV3 sockets on the set
COMPONENT 1 : DVD connected to the COMPONENT 1 sockets on the back
COMPONENT 2 : DVD or HD-SET TOP connected to the COMPONENT 2 sockets on the back
RGB-DTV : HD-SET TOP connected to the RGB-DTV INPUT
sockets on the back
RGB-PC : PC connected to the PC INPUT sockets on the back
Repeatedly press the MENU button to return to normal TV
AV 1
:
AV 2
:
viewing.
Alternatively you
can
select the TV
or
AV mode
by pressing
the
TV/AV button.
In AV modes, to return to TV mode, press the Δ / Ε
22
or
NUMBER buttons.
Other functions
Special
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized view-
ing.
1.
Press the MENU button and then Δ / Ε
Special
2.
3.
4.
Input
Language
Γ
Child lock
Γ
Screen
Γ
Γ
button to select the
menu.
Press the Γ button and then Δ / Ε button to select Child lock.
Press the Γ button and then Δ / Ε button to select On or Off
on the Child lock pull-down menu.
Repeatedly press the MENU button to return to normal TV
ΔΕOΦ ΓOOKOMENU
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
: The
any button
Note
display
on
Child lock on will not appear on the screen if
front panel is pressed while displaying the
the
menus.
Picture
format
modes)
You
1.
2.
3.
can
(only COMPONENT2
watch TV in various
picture formats;
Press the MENU button and then Δ / Ε
Special
4:3
or
or
RGB-DTV
16:9
(Wide).
button to select the
menu.
Press the Γ button and then Δ / Ε button to select Screen.
Press the Γ button and then Δ / Ε button to select ARC.
Screen
ARC
Γ
4:3
H-Position
Γ
16:9
V-Position
Γ
Clock
Γ
Clock Phase
Γ
Auto
Γ
configure
Reset
Γ
Φ ΓOOKOMENU
4.
Press the Γ button and then Δ / Ε button to select 4:3
the Screen pull-down menu.
4:3
This picture format is 4 to 3 of general TV.
or
16:9
on
16:9
You can enjoy the cinema (the picture format of 16:9) or general TV programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is
magnified to the left and right so that the screen 16:9 is full.
: When you watch the TV on 16:9 mode, the screen will
every 2 hours to avoid a permanent image on the screen.
Note
Sleep
move
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
---
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
c.
When you switch the set off, the set releases the preset sleep
time.
---
23
PIP
operation (option)
Option
PIP is
:
an
optional function,
so
that
the set with PIP function
only
can
operate.
PIP
(Picture
in
Picture) displays
a
within
picture
a
picture.
On and off
Press the PIP button to switch on the sub
press this button again to switch it off.
Input
mode selection for sub
Press the INPUT button to select the
picture
input
Each time this button is pressed, each
ture is displayed as shown below.
Programme
number
mode for the sub
input
Press the SWAP button to
Programme
pic-
AV2
between main and sub
Note : When the main
available.
picture.
mode for the sub
AV1
AV3
Swapping
picture.
exchange
picture
is TV
pictures.
AV modes, the
swapping
or
selection for sub
pictures
the main and sub
is
picture
Press the PR +/- buttons to select a programme for the sub picture.
The selected programme number is displayed just below the programme number of main picture.
Sub
picture
size
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
1/9 size of the main
picture
1/2 size
picture
(option)
Note :
a.
When the sub
b.
picture size is 1/2 of the main picture, the picture
quality might get poor.
1/2 size of the main picture is able to work in TV or AV modes
for main picture.
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub pictures move clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations on 12
sub pictures and see your favourite station by exchanging the main
and sub pictures.
Press the SCAN button to select 12 sub pictures.
The selected sub pictures search all the stored stations
Press the SCAN button again to switch off sub pictures.
24
.
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
Teletext is
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
reappears.
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the preceding or fol-
Page
1.
2.
lowing page.
a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
M
button to switch to LIST mode.
Programming
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
4.
coloured button.
can select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
25
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4. The red button permits to return to previous selection.
Alternatively the Ε button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the preceding or fol-
Page
1.
2.
3.
4.
lowing page.
26
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
the TV
picture
on
the
screen
teletext page. The display
corner of the screen. When the
will
display
change
while
waiting
for the
new
will appear at the top left hand
updated page is available then
to the page number.
Press this button to view the
updated
teletext page.
HOLD
Stops
the automatic page
change
which will
occur
if
a
tele-
text page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
picture
off press this button
again.
TIME
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED / GREEN, Δ / Ε
NUMBER buttons.
change
Press
again
or
to exit this function.
27
Connection of PC
PC in socket
(R)-AUDIO-(L)
1.
VIDEO
OUT
S-VIDEO
AV2
AUDIO
PC
SOUND
()
AV1
(L)
(L)
(R)
(R)
Y
AUDIO
RGB-PC OUTPUT
Y
MONO
VIDEO
ANT IN
PB
PB
PR
L L75Ω
VIDEO
RGB-DTV/PC INPUT
2.
PR
COMPONENT1 COMPONENT2
(480i/576i)
(480p/720p/1080i)
DVD/DTV INPUT
RGB-DTV INPUT(480p/720p/1080i)
RGB-PC INPUT(VGA/SVGA/XGA/SXGA)
3.
4.
PERSONAL COMPUTER
(R)-AUDIO-(L)
Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the PC input socket of the set.
Connect the audio cable from the PC to the AV2 (PC SOUND)
sockets of the set.
Press the TV/AV button to select RGB-PC.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
Note :
a.
Connect PC to the PC input sockets of the set after changing
the resolution of PC.
b. If you want to watch the PC monitor only, switch off the set with
the POWER button on the remote control handset. (If you
switch off the set with the ON/OFF button on the set, the screen
of the PC isn't displayed.)
VIDEO
OUT
S-VIDEO
AUDIO
AV2
PC
SOUND
()
AV1
(L)
(L)
(R)
(R)
Y
Y
PB
PB
AUDIO
RGB-PC OUTPUT
RGB-PC OUTPUT in socket
MONO
RGB-DTV PC INPUT
VIDEO
ANT IN
L L75Ω
PR
VIDEO
PR
COMPONENT1 COMPONENT2
(480i/576i)
(480p/720p/1080i)
DVD/DTV INPUT
RGB-DTV INPUT(480p/720p/1080i)
RGB-PC INPUT(VGA/SVGA/XGA/SXGA)
You
can
watch the RGB
in other monitor
(PC) signal
RGB-PC OUTPUT to other monitor's PC
by connecting
input jack.
Note : When you watch the set by connecting RGB-PC OUTPUT
to other monitor, only the screen of other monitor is displayed.
PERSONAL COMPUTER
Displayable
MODE
Monitor
Specification
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
720x400
31.5
70
640x480
31.5
60
640x480
37.5
75
640x480
43.3
85
800x600
37.9
60
800x600
46.9
75
800x600
53.7
85
VGA
SVGA
XGA
SXGA
832x624
49.4
74.55
1024x768
48.4
60
1024x768
56.5
75
1024x768
60.0
85
1152x864
67.5
75
1280x1024
64.0
60
(Synchronization input
28
form
:
separate)
Connection of PC
RGB-PC Mode
1.
2.
3.
Special
(option)
Press the MENU button and then Δ / Ε button to select the
Special
menu.
Input
Language
Γ
Child lock
Γ
Screen
Γ
Γ
Press the Γ button and then Δ / Ε button to select Screen.
Press the Γ button and then Δ / Ε button to select the desired
picture item.
Screen
ΔΕOΦ ΓOOKOMENU
ARC
H-Position
Γ
V-Position
Γ
Clock
Γ
Clock
Γ
Auto
Γ
phase
configure
Reset
Γ
0
Γ
ΔΕOΦ ΓOOKOMENU
4.
Press the Φ / Γ button to make
appropriate adjustments.
Horizontal Position / Vertical Position
This function is to adjust picture to left/right and
up/down
as
you
prefer.
Clock
This function is to minimize any vertical bars or stripes visible on
the screen background. And the horizontal screen size will also
change.
Clock phase
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
Auto configure
This function is for the automatic adjustment of the screen position, clock and clock phase. The displayed image will disappear
for a few seconds while the Auto-configuration is in process.
Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and clock phase manually.
Reset
This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed.
5.
6.
Press the OK button to store it for the PC monitor picture.
Repeatedly press the MENU button to return to normal TV
viewing.
29
Connection of external
You
(R)-AUDIO-(L)
can
connect additional
equipment
equipment,
such
as
VCRs, camcorders
etc. to your set.
VIDEO
OUT
S-VIDEO
AUDIO
AV2
PC
()
SOUND
(L)
(L)
(R)
(R)
AV1
Y
Y
PB
PB
RGB-PC OUTPUT
AUDIO
Here shown may be somewhat different from your set.
MONO
RGB-DTV/PC INPUT
VIDEO
ANT IN
PR
VIDEO
PR
LL75Ω
COMPONENT1 COMPONENT2
(480i/576i)
(480p/720p/1080i)
RGB-DTV INPUT(480p/720p/1080i)
DVD/DTV INPUT
RGB-PC INPUT(VGA/SVGA/XGA/SXGA)
Aerial socket
1.
VCR
(R)-AUDIO-(L)
Connect the RF out socket of the VCR to the aerial socket
on
the back of the set.
VIDEO
S-VIDEO
AUDIO
AV2
PC
SOUND
AV1
(L)
(L)
(R)
(R)
Y
Y
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
4.
OUT
()
2.
RGB-PC OUTPUT
AUDIO
stored.
MONO
RGB-DTV/PC INPUT
VIDEO
ANT IN
PB
PB
PR
LL 75Ω
VIDEO
PR
COMPONENT1 COMPONENT2
(480i/576i)
(480p/720p/1080)
RGB-DTV INPUT(480p/720p/1080i)
RGB-PC INPUT(VGA/SVGA/XGA/SXGA)
DVD/DTVINPUT
5.
Press the PLAY button
on
the VCR.
Audio/Video in/out sockets
VCR
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
2.
S-VIDEOL/MN
3.
Press the TV/AV button to select AV 1, AV 2
Press the PLAY button on the VCR.
The VCR
AUDIO
You
R
can
AV3
playback picture appears
on
the
also record programmes received
out sockets.
or
AV 3.
screen.
by
the TV
on
video
tape via audio/video
: If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Note
VCR
S-Video / Audio in sockets
(R)-AUDIO-(L)
When
VIDEO
OUT
S-VIDEO
AUDIO
AV2
PC
SOUND
()
AV1
(L)
(L)
(R)
(R)
Y
Y
PB
PB
PR
PR
AUDIO
RGB-PC OUTPUT
connecting
picture quality will
an
(S-AV) (option)
S-VIDEO VCR to the S-VIDEO socket, the
be further
improved.
MONO
RGB-DTV/PC INPUT
VIDEO
ANT IN
VIDEO
1.
L L75Ω
COMPONENT1 COMPONENT2
(480i/576i)
(480p/720p/1080i)
DVD/DTV INPUT
Connect the S-video socket of the VCR to the S-VIDEO socket
RGB-DTV INPUT(480p/720p/1080i)
RGB-PC INPUT(VGA/SVGA/XGA/SXGA)
of the set.
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
S-VIDEO VCR
3.
Select AV1
4.
Press the PLAY button
The VCR
Note
AUDIO
AV3
S-VIDEO VCR
by pressing
on
the TV/AV button
repeatedly.
the VCR.
on
the
screen.
If both S-VIDEO and VIDEO sockets have been connected
received.
R
AV3
playback picture appears
to the S-VHS
S-VIDEOL/MN
30
:
or
VCR
simultaneously, only
the S-VIDEO
can
be
Connection of external
Component
equipment
in sockets
(R)-AUDIO-(L)
1.
Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y
or Y PB PR) of the DVD to the COMPONENT 1 (480i/576i) or
VIDEO
OUT
S-VIDEO
AV2
AUDIO
PC
()
SOUND
AV1
2.
(480p/720p/1080i)
sockets
(Y
PB
of the set.
PR)
(R)
Y
Y
PB
PB
AUDIO
RGB-PC OUTPUT
VIDEO
PR
VIDEO
PR
LL 75Ω
COMPONENT1 COMPONENT2
(480i/576i)
(480p/720p/1080i)
DVD/DTV INPUT
RGB-DTV INPUT(480p/720p/1080i)
RGB-PC INPUT(VGA/SVGA/XGA/SXGA)
Connect the audio cable from the DVD to COMPONENT 1
(480i/576i)
or
COMPONENT 2
(480p/720p/1080i) AUDIO
sockDVD
ets of the set.
3.
(L)
(R)
RGB-DTV/PC INPUT
ANTIN
COMPONENT 2
(L)
MONO
Press the TV/AV button to select COMPONENT1
COMPO-
or
NENT2.
4.
Press the PLAY button
The DVD
on
the DVD.
playback picture appears
on
the
screen.
(R)-AUDIO-(L)
VIDEO
OUT
S-VIDEO
AV2
AUDIO
PC
()
SOUND
AV1
(L)
(L)
(R)
(R)
Y
Y
PB
PB
AUDIO
RGB-PC OUTPUT
MONO
RGB-DTV/PC INPUT
VIDEO
DTV in sockets
ANT IN
PR
VIDEO
PR
LL 75Ω
COMPONENT1 COMPONENT2
(480i/576i)
(480p/720p/1080)
DVD/DTV INPUT
1.
2.
HD-SET TOP inputs to the COMPONENT 1
(480i/576i) or COMPONENT 2 (480p/720p/1080i) sockets (Y
PB PR) on the set. (or, connect the HD-SET TOP with the D-Sub
output socket to RGB-DTV/PC INPUT socket on the set and
audio cable of the HD-SET TOP to the AUDIO sockets of AV2.)
RGB-DTV INPUT(480p/720p/1080)
RGB-PC INPUT(VGA/SVGA/XGA/SXGA)
Connect the
HD-SET TOP
Connect the audio cable from the HD-SET TOP to COMPONENT 1
(480i/576i)
or
COMPONENT 2
(480p/720p/1080i)
AUDIO sockets of the set.
(R)-AUDIO-(L)
3.
Press the TV/AV button to select COMPONENT2
or
RGB-
VIDEO
OUT
S-VIDEO
AV2
AUDIO
PC
SOUND
()
DTV.
AV1
(L)
(L)
(R)
(R)
Y
Y
PB
PB
AUDIO
RGB-PC OUTPUT
MONO
RGB-DTV/PC INPUT
VIDEO
ANT IN
LL 75Ω
PR
VIDEO
PR
COMPONENT1 COMPONENT2
(480i/576i)
(480p/720p/1080)
DVD/DTVINPUT
RGB-DTV INPUT(480p/720p/1080i)
RGB-PC INPUT(VGA/SVGA/XGA/SXGA)
Monitor out sockets
Second TV
Connect the audio/video in sockets of the other TV
or
monitor to
OUT sockets of the set.
31
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
Download PDF

advertising