LG WF-32A10S Owner's manual

LG WF-32A10S Owner's manual
Colour Television
OWNER'S MANUAL
Please read this manual
before
operating your
carefully
set. Retain it
for future reference.
Record model number and serial
number of the set. See the label
attached
on
the back
quote this information
when you
require
Model number
:
Serial number
:
P/NO
:
482-H35A
cover
and
to your dealer
service.
(MC52A/C, 212Q TX)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
4
Front
panel
Basic
7
operation
Programme selection
Volume adjustment / Mute function
On screen language selection (option)
On and off /
On
8
screen menus
Menu selection
Station
Auto programme / Manual programme
Programme edit
Calling
Picture
Picture
9
the programme table
14
adjustment
Picture format selection
Sound
15
Sound
adjustment
Stereo/Dual reception
NICAM broadcast reception
Sound
output selection
Special functions
Child lock / Sleep timer
Purity level / On screen display width
17
PIP operation
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Sub picture freeze
Sub picture position change
18
Teletext
Switch on/off
Simple / TOP / FASTEXT mode
Special teletext functions
19
Connection of external equipment
Hi-Fi amplifier system connection
22
Aerial socket / Euro scart sockets/AV sockets
(option)
Audio/Video in sockets / S-video/Audio in sockets
Copy
function
Satellite receiver (option)
Satellite dish connection
Setting the LNB frequency
LNB power on/off
Auto programme / Manual programme
Satellite frequency guide
Troubleshooting
2
check list
24
Back
cover
Installation
Power
This set
supply, the voltage is as indicated
apply DC power to the set. To
protect your set from damage during thunderstorms, please pull
out the mains plug and aerial plug.
on
operates
the label
on
on a
AC mains
the back. Never
Warning
To
prevent fire
shock
or
hazard, do
not expose the set to rain
or
moisture.
Service
Never
remove
the back
high voltage
properly, unplug it
cover of the set as this can expose you to
and other hazards. If the set does not operate
very
and call your dealer.
Aerial/Satellite dish connections
(option)
Connect the aerial cable to the socket marked +75Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Connect the satellite LNB cable to the socket
on
the back
cover.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
placed
the ventilation
or
heat. Also
position to allow a free flow
openings on the back cover.
a
ensure
that the
of air. Do not
cover
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
adjusted
with the buttons
on
the front
of the set.
Remote control handset
Before you use the remote control
batteries. See the next page.
1
handset, please install the
ST-BY
2
1.
3
STANDBY
switches the set
TV/AV
from
on
standby
or
off to
standby.
123
ARC
4
2.
456
MUTE
switches the sound
on or
off.
PSM
789
SSM
5
0
6
selects TV
clears the
LIST
VOL
7
3. TV/AV
PR
OK
TEXT MENU
PIP
SWAP
AV mode.
from the
screen.
VOL
PR
POSITION STILL
or
menu
4.
NUMBER BUTTONS
switch the set
INPUT
on
from
standby
or
directly
select
a
programme.
8
5.
DUAL I/II
selects the
selects
MIX
TIME
REVEAL INDEX
SIZE
HOLD
UPDATE
6.
LIST
displays
START LENGTH
CH+
QSR
SP/LP
the programme table.
ON/OFF
REW
PLAY
FF
P/STILL
STOP
REC
7.
9
CH-
language during dual language broadcast.
sound during stereo broadcast.
mono
MENU
calls the main
8.
For further
a menu.
are
details,
used for the teletext.
see
the 'Teletext' section.
VCR BUTTONS
control
4
clears
TELETEXT BUTTONS
These buttons
9.
menu or
a
GoldStar video cassette recorder.
Location and function of controls
10. ARC
(Aspect Ratio Control)
changes the picture format.
11. PSM
(Picture Status Memory)
preferred picture setting.
recalls your
12. SSM
(Sound Status Memory)
preferred sound setting.
recalls your
13. Δ / Ε
(Programme Up/Down)
on from standby.
ST-BY
switches the set
selects
Φ / Γ
a
programme
or a menu
item.
TV/AV
(Volume Down/Up)
adjusts
adjusts
123
the volume.
menu
settings.
OK
accepts your selection
displays
or
0
11
SSM
12
VOL
13
PR
LIST
VOL
PIP
OK
TEXT MENU
switches the sub
picture
on or
mode for the sub
PIP
PR
off.
POSITION STILL
input
10
PSM
789
the current mode.
14. PIP BUTTONS
INPUT
selects the
ARC
456
SWAP
INPUT
INDEX
14
picture.
SWAP
alternates between main and sub
pictures.
STILL
freezes motion of the sub
picture.
TIME
REVEAL
SIZE
HOLD
UPDATE
START LENGTH
POSITION
CH+
relocates the sub
Battery
MIX
picture
in clockwise direction.
CH-
QSR
SP/LP
ON/OFF
REW
PLAY
FF
P/STILL
STOP
REC
installation
The remote control handset is
powered by two AA type batteries.
Gently pull down the cover of the remote control handset until the
battery compartment is exposed. Install two batteries as indicated
by the polarity symbols( and
) marked inside the compartment.
Note
:
To avoid
damage
from
batteries if you do not plan to
extended
period
possible battery leakage,
use
the
remove
the remote control handset for
an
of time.
5
Location and function of controls
Front
panel
1
8
910
AUDIO
S-V DEO
VIDEO
L/MONO
ST-BY
R
ARC
MENU
OK
VOL
POWER
PR
AV3
1.
7
3456
2
S-VIDEO/AUDIO IN SOCKETS
(S-AV)
Connect the video out socket of
an
S-VHS VCR to the S-
VIDEO socket. Connect the audio out sockets of the S-VHS
VCR to the audio sockets
2.
in AV3.
as
AUDIO/VIDEO IN SOCKETS
(AV3)
Connect the audio/video out sockets of external
equipment
these sockets.
3.
4.
ARC
(Aspect Ratio Control)
changes the picture format.
MENU
calls the main
5.
menu or
7.
a menu.
OK
accepts your selection
6.
clears
or
displays
the current mode.
Φ / Γ
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
Δ / Ε
(Programme Up/Down)
on from standby.
switches the set
selects
8.
9.
a
programme
or a menu
REMOTE CONTROL SENSOR
POWER/STANDBY INDICATOR
illuminates
brightly
when the set is in
dims when the set is switched
10. MAIN POWER
switches the set
6
item.
on or
off.
on.
standby
mode.
to
Basic
operation
On and off
1.
Press the main power button
on
the set, the set then switches
on.
2.
If the set is in
3.
press the ST-BY, Δ / Ε or
the remote control handset to fully switch
standby mode,
NUMBER buttons
on
the set on.
Press the ST-BY button
on
the remote control handset.
The set reverts to standby.
4. Press the main power button on the set again. It switches the
set off and the power/standby indicator goes out in a few
seconds.
ST-BY
Note :
a.
If you do not press any button within two hours after the set is
switched on, the set will automatically switch back to standby
mode.
b. If no broadcast signal is received for about 10 minutes, the set
will automatically switch itself to standby mode.
TV/AV
123
456
789
Programme
selection
You
a
can
select
SSM
0
programme number with the Δ / Ε
or
PR
NUMBER
VOL
buttons.
OK
VOL
MENU
PR
Volume
adjustment
Press the Φ / Γ button to
adjust
the volume.
Mute function
Press the
button. The sound is switched off and the
appears. You
buttons.
can
On
language
The
screen
menu can
cancel it
be
by pressing
selection
displayed
on
French, Italian, Spanish, Swedish
the
or
the
,,
Φ /
Γ,
display
SSM
or
I/II
(option)
screen
in
English, German,
language.
Dutch. First select your
1.
Press the MENU button.
2.
Select SPECIAL with the Φ / Γ button then press the OK
3.
button. Or you can press the CYAN button directly.
Select Language OSD with the Δ / Ε button then press the
OK button.
4.
Set your
button.
All the
language
on screen
Press the MENU
Or exit the
menu
with the Φ / Γ button then press the OK
displays
or
will appear in the selected
CYAN button to return to the
fully by pressing
language.
previous
menu.
the TV/AV button.
7
On
screen menus
The
an
are
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps
menu.
displayed.
Menu selection
1. Press the MENU button.
menu with the Φ / Γ button then press the
OK button. Or you can press one of the four COLOURED
buttons corresponding to the coloured menu you want to select.
2. Select the desired
VOL
OK
Station
menu
Picture
menu
(TV mode)
VOL
MENU
Main
menu
Sound
menu
Special
Note
:
'On
Therefore
displayed.
8
selection' is
language
Language OSD in
screen
the
Special
menu
optional
menu
function.
may not be
Station
The station
storage
contains two selections for station search and
menu
Auto
-
Programme
and Manual
Programme.
Auto programme
By auto programming, stations can be searched for
automatically in the selected receiving range (band).
1.
Press the MENU button then the RED button.
2.
Select Auto
Programme
and stored
with the Δ / Ε button then press
the OK button.
/
TV/AV
123
456
~
789
Select Start with the Δ / Ε button.
3.
4.
Enter
a
begin
with the Φ / Γ
double
digit
programme number at which
NUMBER buttons.
are
stored from this programme
number onwards.
5.
Select
6.
Select
a
is to
0
VOL
In this way, all further stations
In
storing
Up to 100 (00 to 99)
Range with the Δ / Ε button.
the frequency range with the Φ
set with
a
PR
or
stations
VOL
MENU
PR
be stored.
can
OK
/ Γ button.
built-in satellite tuner, you have to select the
socket to which the satellite dish is
connected; Sat-Y
or
Sat-X.
See the 'Satellite receiver' section.
V/UHF
:
Ch.01-69
Cable
:
Ch.S01-S47
Sat-Y/X
:
Select
7.
System
with the Φ / Γ
Ch. 000
-
169
with the Δ / Ε button then set
button; BG, I, DK
or
L
(PAL,
a
TV
system
SECAM will be
automatically selected).
8.
Select Execute with the Δ / Ε button.
9.
Press the OK button to start auto
programming.
All receivable stations
are stored. The programme
stored for stations which broadcast VPS (Video
Service) data,
the stored stations
If
name
no
station
number is
assigned
can
be
name
is also
Programme
are automatically sorted.
assigned to a station, the
channel
and stored.
The programme edit mode appears after completing autoprogramming. Exit the menu by pressing the TV/AV button if you
agree with the programme assignment. If not, you can edit the
programmes
You
can
now
as
you
prefer.
See the
'Programme
edit' section.
recall the stored TV programmes with the Δ / Ε
or
NUMBER buttons.
9
Station
Manual programme
1.
2.
Press the MENU button then the RED button.
Select Manual Programme with the Δ / Ε button then press
the OK button.
\
.
123
3.
Select
4.
Select the
You
456
Range
can
with the Δ / Ε button.
frequency range with the Φ / Γ button.
select between the ranges V/UHF and the
channel range Cable for cable TV
789
0
In
a
set with
special
systems.
built-in satellite tuner, you have to select the
connected; Sat-Y or Sat-X.
a
socket to which the satellite dish is
PR
See the 'Satellite receiver' section.
VOL
OK
VOL
5.
MENU
PR
6.
7.
Select
with the Δ / Ε button.
System
Then select the
Φ / Γ
BG, I, DK
be
or
L
appropriate TV system with the
(PAL, SECAM will automatically
button;
selected).
Select Channel with the Δ / Ε button.
Enter the double
digit
channel number with the Φ
/ Γ
or
NUMBER buttons.
You
can
also search for stations
The search
and sound
stops when
are
not
a
by pressing
the OK button.
station has been found. If the
perfect
or
you want another
station,
picture
restart
the search.
8.
If
reception
condition is not
good,
select Fine with Δ
/ Ε
button.
Then carry out fine tuning for the best
with the Φ / Γ button.
9.
picture
and sound
quality
Select Name with the Δ / Ε button.
10. Enter
a
station
name
with the Φ / Γ button.
A programme name has five positions and you can use the
letters A to Z, numbers 0 to 9 and symbols +, or blank.
-
Press the OK button to store
position
10
position,
and the next
is called.
If you do want to
step.
one
stop entering the
name, execute the next
Station
11. Select AV in with the Δ / Ε
source
button then the desired
input
with the Φ / Γ button.
Off
: no
VCR 1
:
VCR 2
:
AV 1
:
AV 2
:
AV 3
:
S-AV
playback possible through the sockets
playback through euro scart socket 1 with
switching voltage possible
AV playback through euro scart socket 2 with
switching voltage possible
AV playback through socket(s) 1 without switching
voltage possible
AV playback through socket(s) 2 without switching
voltage possible
AV playback through the front AV3 sockets without
switching voltage possible
AV playback through the front S-VIDEO and AUDIO
IN sockets without switching voltage possible
:
AV
TV/AV
123
456
789
VCR automatic
switching
If your VCR outputs a switching voltage (Euro scart pin 8, 4:3 12V,
16:9 8V) when it is switched to playback, select VCR1 or VCR2.
You can now watch your recordings, normal or wide screen with
automatic picture size and VCR selection.
0
VOL
PR
OK
VOL
MENU
PR
12. Press the MENU button to store the searched station.
\
?
.
~
13. Enter the double
digit
programme number with the Φ / Γ
or
NUMBER buttons.
14. Select Store? with the Δ / Ε button.
15. Select Yes to execute
or
No to cancel
storage
with the Φ / Γ
button.
16. Press the OK button.
Repeat steps
Exit the
Note
:
menu
NTSC
7 to 16 for further programmes.
by pressing
can
only be
the TV/AV button.
received in AV
PAL / SECAM / NTSC will be selected
or
Satellite modes.
automatically.
11
Station
Programme
edit
This function enables you to delete, move or skip the stored
programmes as you like. You can also store other stations at some
programme numbers without
changing
the order of programmes.
Press the MENU button then the RED button.
Select Programme Edit with the Δ / Ε button then press the OK
button.
"'
TV/AV
Deleting programmes
1.
2.
PR
Select the programme to be deleted with the Δ / Ε button.
Press the RED button.
Press the OK button to delete the programme.
The selected programme is deleted and all the
programmes are shifted forward one position.
3.
VOL
OK
MENU
PR
VOL
Exit the
menu
by pressing
following
the TV/AV button.
Inserting a free programme number
This function enables you to insert programmes later.
A programme memory is only displayed with the channel number
in the programme table.
New station data can be stored in this programme memory.
1. Select a programme number for insertion with the Δ / Ε button.
2.
Press the GREEN button.
All the
following programmes
the next programme number.
You can enter station data at
'Manual
Exit the
Programme' menu.
menu by pressing the
are
a
shifted forward
one
position
to
free programme number with the
TV/AV button.
Moving programmes
1.
2.
Select the programme to be moved with the Δ / Ε button.
Press the YELLOW button.
3.
Move the programme to the desired programme number with
the Δ / Ε button.
4.
Press the OK
The station
Exit the
12
or
names
menu
MENU button.
and data
by pressing
are
moved.
the TV/AV button.
Station
Skipping programmes
1.
2.
Select the programme to be
Press the CYAN button.
skipped
with the Δ / Ε button.
The station
name turns grey and the programme is skipped.
When you press the CYAN button again, the station name returns
to black and skip is cancelled. With the Δ / Ε button the skipped
programme cannot be found. If you want to find the skipped
programme, directly enter the programme number with the
NUMBER buttons.
Note
:
The programme number 01 cannot be
Changing the station
You
can
select
example,
1.
2.
in
a
case
skipped.
name
station
name
from the
name
of stations without station
list. This is
useful, for
Select the programme at which you want to
with the Δ / Ε button.
TV/AV
123
name.
change
a
name
456
Press the Γ button.
78
0
"'
9
PR
LIST
VOL
OK
VOL
MENU
PR
3.
Select
a name
from the
list with the Δ / Ε
name
or
MENU
button.
4.
Store the
5.
Press the Φ button.
name
Repeat steps
Exit the
menu
Calling
with the OK button.
1 to 5 for further programmes.
by pressing the TV/AV button.
the programme table
The programme table
stations.
gives
1.
Press the LIST button.
2.
Page through
you
an
at-a-glance
view of the stored
the programme table with the Δ / Ε
or
Φ
/ Γ
buttons.
3.
Press the OK button to switch to the desired TV programme.
by pressing the TV/AV or MENU button.
Exit the table
13
Picture
Picture
You
and
1.
2.
3.
adjustment
adjust picture contrast, brightness,
sharpness to the level you prefer.
can
colour
Press the MENU button then the GREEN button.
a desired item with the Δ / Ε button.
Adjust the value with the Φ / Γ button.
At this
adjustment
setting
steps
4.
5.
6.
ARC
7.
point you can complete your
for immediate recall by following
Select Store with the Δ / Ε button.
Exit the
menu
Your
MENU
PR
NTSC
or
signal
store your
4 to 7.
by pressing
VOL
for
the TV/AV button.
now stored are remains your preferred
picture
setting
setting until you store different values with this menu. Your
preferred setting is retained even when the set is switched off by
PR
OK
a
Press the OK button.
Select Favorite 1 or Favorite 2 with the Δ / Ε button.
Press the OK button.
PSM
VOL
tint
Select
Note : Tint adjustment is available when receiving
via the AV input sockets or via the satellite receiver.
TV/AV
intensity,
is
the main power button.
To recall your preferred setting, press the PSM button until the
desired picture (Standard, Favorite 1 or Favorite 2) appears.
The Standard picture is programmed for good picture reproduction at the
factory
and cannot be
changed.
Picture format selection
You
can
watch the TV in various
picture
formats.
Press the ARC button to switch to 4:3, Spectacle, 16:9, Zoom 1 or
Zoom 2 picture format. Also see page 11, VCR automatic switching.
4:3 Normal
This is normal
picture
size 4
by
3
as
displayed
on
all TV sets.
Spectacle
The centre of the
3 mode but the
edges
filled to 16
are
picture is displayed as in 4 by
magnified so that the whole screen is
by
9
size.
16:9 Wide
Cinema
screen
screen
pictures
are
viewed like this. Some TV stations
broadcast programmes (mainly
cinema picture, select this mode.
films)
in the mode. To
enjoy
the
screen
but
Zoom 1
The normal 4 by 3 picture is magnified to fill the whole
the extreme top and bottom of the picture are lost.
Zoom 2
Similar to Zoom 1 but the
subtitles at the bottom of the
top of the picture is lost.
14
picture
picture
is shifted upwards so that
be viewed, therefore the
can
Sound
Sound
adjustment
You
adjust
can
the sound
and surround
treble, bass, balance, UBB (Ultra Bass
you prefer. The surround sound creates
the sound effect surrounded around as in a concert hall and UBB
Booster)
stresses and
as
emphasizes heavy
sound.
1.
2.
Press the MENU button then the YELLOW button.
Press the Δ / Ε button to select a desired item.
3.
Adjust
the value with the Φ / Γ button.
You
4.
can store the values you have set under the sound
Select Store with the Δ / Ε button.
5.
Press the OK button.
6.
Select Favorite 1
7.
Press the OK button.
Exit the
menu
or
menu.
TV/AV
Favorite 2 with the Δ / Ε button.
by pressing
the TV/AV button.
SSM
To recall your preferred setting press the SSM button until the
sound (Standard, Favorite 1 or Favorite 2) appears. The
Standard sound is
the
factory
and
Stereo/Dual
programmed for good
cannot be changed.
sound
reproduction
at
PR
VOL
OK
VOL
MENU
PR
reception
When
a
programme is selected, the sound information for the station
appears on the screen after the programme number and station
name
disappear.
You
can
also press the OK button to recall this
information.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
Dual I
Display
Mono sound selection
In stereo reception if the stereo signal is weak; you can switch to mono
by pressing the I/II button. In mono reception the depth of sound is
improved. To switch back to stereo, press the I/II button again.
15
Sound
Language selection for dual language broadcast
If a programme is received in two languages (dual language), you can
switch to Dual I, Dual II or Dual I+II by pressing the I/II button
repeatedly.
Dual I sends the primary broadcast language to the loudspeakers.
Dual II sends the
Dual I+II sends
secondary
a
NICAM broadcast
This set
broadcast
separate language
language to the loudspeakers.
loudspeaker.
to each
reception
receive the
high quality NICAM (Near Instantaneous
Multiplex) digital sound.
Sound output can be selected according to type of the received
broadcast as follows by pressing the I/II button repeatedly.
can
Audio
Companding
1.
When NICAM
MONO
2.
or
mono
is
received, you
can
select NICAM
received, you
can
select NICAM
FM MONO.
When NICAM stereo is
STEREO
FM
or
FM MONO. If the stereo
signal
is
weak, switch
to
mono.
3. When NICAM dual is
Dual I+II
or
received, you
can
select Dual
I, Dual II,
FM MONO.
Sound output selection
In AV
mode, you
can
select
output sound for the left and the right
loudspeakers.
Repeatedly
L+R
:
press the I/II button to select the sound
Audio
R+R
16
:
:
is sent to left
output.
input
loudspeaker
signal
signal from audio R input is sent to right loudspeaker.
Audio signal from audio L input is sent to left and right
loudspeakers.
Audio signal from audio R input is sent to left and right
loudspeakers.
and audio
L+L
from audio L
Special
functions
Child lock
The TV
can
control it.
This feature
1.
2.
3.
be set
can
so
that the remote control handset is needed to
be used to
prevent unauthorised viewing.
Press the MENU button then the CYAN button.
Select Child Lock with the Δ / Ε button.
Select On with the Φ / Γ button on the remote control handset.
Exit the
menu
by pressing
the TV/AV button.
With the child lock on, the display Child Lock appears on the
if any button on the front panel is pressed while viewing the TV.
Sleep
screen
timer
TV/AV
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
1.
2.
3.
Press the MENU button then the CYAN button.
Select Sleep Timer with the Δ / Ε button.
Set the desired time with the Φ / Γ button.
Exit the
You
menu
by pressing
set the
can
the TV/AV button.
sleep timer up to four hours at
begins to count down from
minutes. The timer
minutes selected.
Note : To cancel this
LNB
function, press the
PR
intervals of ten
the number of
Φ / Γ button to select
VOL
OK
VOL
MENU
PR
--:--.
frequency/LNB power
See the 'Satellite receiver' section.
Purity
level
Your TV set is designed for use in many different countries
throughout the world. In order to obtain the best picture, i.e. least
tilt
please
set the
In the Northern
In the Southern
purity level as follows:
hemisphere to 0, +1 or +2
hemisphere to 0, -1 or -2
Press the MENU button then the CYAN button.
Purity Level with the Δ / Ε button.
3. Adjust the purity with the Φ / Γ button.
1.
2.
Select
Exit the
menu
by pressing
the TV/AV button.
OSD width
2.
Press the MENU button then the CYAN button.
Select OSD Width with the Δ / Ε button.
3.
Set the width of the
1.
on
screen
display
with the Φ / Γ
button;
Wide or Narrow.
Exit the menu by pressing the TV/AV button.
Note : In OSD Width Narrow, if teletext is switched on, the
teletext page is displayed in narrow on the left of the screen. See
the 'Special teletext functions' section.
17
PIP
PIP
operation
(Picture
in
a
picture
within
on
the sub
picture.
Picture) displays
a
picture.
On and off
Press the PIP button to switch
Press this button
Note
:
to switch it off.
again
When you press the PIP button while
displaying
an
NTSC
system picture, the sub picture is larger than the normal sub
picture.
Input
mode selection for sub
picture
Press the INPUT button to select the
input
mode for the sub
picture.
When the sub
picture
is switched to TV
programme for the sub
PR
Swapping
picture
mode, you
with the Δ / Ε
between main and sub
Press the SWAP button to
exchange
or
change
can
the
NUMBER buttons.
pictures
the main and sub
pictures.
PIP
PR
POSITION STILL
SWAP
INPUT
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button
Sub
again
picture position change
Press the POSITION button
achieved. The sub
18
picture.
to restore motion.
picture
repeatedly
moves
until desired
clockwise.
position
is
Teletext
Teletext is
a free service broadcast by most TV channels which
gives up-to-the-minute information on news, weather, television
programmes, share prices and many other topics.
The teletext decoder of this TV
can support the Simple, TOP and
Simple mode consists of a number of pages which
are selected by directly entering the corresponding page number. TOP
and FASTEXT are more modern methods allowing quick and easy
FASTEXT modes.
selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext. The initial page or the
screen. The teletext decoder will
last selected page appears on the
be in the teletext mode transmitted
by
123TV/AV
the broadcast station.
Two page numbers, TV channel name, date and time are displayed
on the screen headline. The first page number indicates your
selection while the second shows the current page displayed.
Press the TEXT or TV/AV button to switch off teletext. The previous
456
78
mode reappears.
Simple
0
mode
PR
Enter the desired page number as a three digit number with the
number buttons. If during selection you press a wrong number,
you must
2.
PR
TEXT
Page selection
1.
9
complete
the three
digit
number and then re-enter the
correct page number.
The Δ / Ε button can be used to select the
following
preceding
or
page.
Note : If you enter a page number which does not exist the second
page number will continually count up to indicate this error.
19
Teletext
TOP mode
The
user
guide displays
at the bottom of the
four fields
screen.
The
red, green, yellow and cyan
yellow
field denotes the next
group and the cyan field indicates the next block.
Group/block/page selection
1.
2.
With the CYAN button you can progress from block to block.
Use the YELLOW button to proceed to the next group with
automatic overflow to the next block.
3.
With the GREEN button you can proceed to the next existing
page with automatic overflow to the next group. Alternatively the
4.
The RED button
Δ button
123
0
be used.
Alternatively the
456
78
can
permits
Ε button
to return to
can
previous
selection.
be used.
Direct page selection
Corresponding to the Simple mode, you can select a page by
entering its three digit number with the NUMBER buttons in TOP
9
PR
mode.
PR
FASTEXT mode
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
INDEX
Page selection
1.
2.
Press the INDEX button to select the index page.
can select the pages which are colour coded
You
bottom line with the
same
along
the
coloured buttons.
3.
Corresponding to the Simple mode, you
entering its three digit number with the
4.
The Δ
select a page by
NUMBER buttons in
can
FASTEXT mode.
/ Ε button
following
20
page.
can
be used to select the
preceding
or
Teletext
Special
teletext functions
REVEAL
Press this button to
display the
puzzles.
again to remove
solutions of riddles
Press this button
concealed information such
as
or
the information from the
display.
EXPAND
(SIZE)
height text.
this button to enlarge the top half of the page.
this button again to enlarge the bottom half of the page.
this button again to return to the normal display.
Selects double
Press
Press
Press
UPDATE
Displays
the TV
picture
on
the
screen
while
waiting
for the
new
teletext page. The display
will appear at the top left hand
corner of the screen. When the updated page is available the
will
display
change
to the page number.
Press this button to view the
HOLD
updated
teletext page.
PR
(STOP)
Stops the automatic page change which will occur if a teletext page
consists of two or more sub pages. The number of sub pages and
VOL
PR
the sub page displayed is, usually, shown on the screen below the
time. When this button is pressed the stop symbol is displayed at
the
top left hand
change
corner
of the
screen
VOL
TEXT MENU
and the automatic page
is inhibited.
To continue press this button
again.
MIX
TIME
REVEAL
SIZE
HOLD
UPDATE
MIX
Displays
the teletext pages superimposed on the TV
picture off press this button again.
picture.
To switch the TV
TIME
When
viewing
time at the
again
to
a
TV programme, press this button to display the
corner of the screen. Press this button
top right hand
remove
the
display.
change a
In teletext mode press this button to
four digit sub page number. This is
select and hold
or
displayed along
the bottom of the
screen.
Press this button
again
to exit this function.
Teletext page wide/narrow
With the Special menu, you can determine whether the teletext
page is to be displayed wide or narrow.
1.
Press the MENU button then the CYAN button.
Select OSD Width with the Δ / Ε button.
3. If you set Wide with the Φ / Γ button, the teletext page will fill
out the screen in the teletext mode.
2.
4.
If Narrow, the teletext page is displayed in
Switch to teletext with the TEXT button.
Note
:
If you set
Narrow, the SIZE button
can
compressed
form.
not function.
21
Connection of external
Hi
Fi
-
The
equipment
connection
amplifier system
sockets for
phono
Hi-Fi
a
amplifier system
are on
the back of
the set; L=left sound channel, R=right sound channel
If you connect an amplifier system, you can also play the TV sound
through
only the
the stereo
If you press the
switched off.
amplifier system.
speakers is
sound of the TV's
button,
Aerial socket
1.
2
75Ω
Y
Connect the RF out socket of the VCR to the aerial socket
on
X
the back of the set.
SAT
2.
L
1
Connect the aerial cable to the RF aerial in socket of the VCR.
R
3.
AUDIO OUT
Store the VCR channel
the 'Manual
4.
VCR
on a
programme'
desired programme number
Select the programme number where the VCR channel is
stored.
5.
Press the PLAY button
on
the VCR.
Euro scart sockets/AV sockets
1.
2
75Ω
Y
using
section.
X
Connect the
euro
socket 1
on
or
2
(option)
scart socket of the VCR to the
euro
scart
the back of the set.
SAT
In
L
1
case
of
R
AUDIO OUT
phono sockets,
connect the audio/video in sockets of
the VCR to the audio/video out sockets
on
the back of the set
and the audio/video out of the VCR to the audio/video in of the
set.
VCR
2.
Select the AV 1 mode for the
2
3.
by pressing
Press the PLAY button
button to record
AV2
L/MONO
IN
IN
VIDEO
75Ω
X
OUT
RL
AV1
SAT
on
viewing
TV programme.
:
You
can
AUDIO
OUT
the
change
names
for AV modes. In AV mode press
change the name
the MENU button then the RED button. To
IN
VIDEO
R
a.
L/MONO
LIN
AUDIO OUT
Note
a
AUDIO
OUT
Y
socket(s) 1 or AV2 for the socket(s)
repeatedly.
the VCR to play the VCR or the REC
the TV/AV button
OUT
refer to the
RL
b.
step
10
Signal type RGB,
on
the page 10.
i.e. the
be selected for the
euro
signals red,
transmitted, for example, by
a
computer, teletext decoder
or
Photo CD unit.
VCR
c.
To
use a
euro
22
green and blue can only
These signals are
scart socket 1.
pay TV/satellite
scart socket 1.
decoder,
connect the decoder to the
Connection of external
Audio/Video in sockets
1.
equipment
(AV3)
Connect the audio/video out sockets of the VCR to the
AUDIO/VIDEO IN
(AV3) sockets on the front panel of the set.
by pressing the TV/AV button repeatedly.
2.
Select the AV3 mode
3.
Press the PLAY button
on
the VCR.
VCR
S-video/Audio in sockets
(S-AV)
When
connecting an S-VHS VCR to
picture quality will be further improved.
1.
socket, the
Connect the S-video socket of the VCR to the S-VIDEO socket
on
2.
the S-VIDEO
the front
panel
of the set.
Connect the audio cable from the S-VHS VCR to the AUDIO IN
sockets
on
the front
panel of the set.
by pressing the
3.
Select the S-AV mode
4.
Press the PLAY button
on
TV/AV button
repeatedly.
the VCR.
S-VHS VCR
: If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket on the front panel of the set.
Note
Directly switching
to TV mode from AV mode
Press any one of the NUMBER buttons in AV mode.
In PIP mode, when both main and sub pictures are in AV
mode,
press one of the NUMBER buttons.
You can switch to the last viewing TV programme.
Copy
function
If you have two
VCRs, you
is
to copy from the VCR connected to the
only possible
the front S-AV
or
can
copy from
one
AV3 sockets to the VCR at the
VCR to the other. It
socket(s) 1,
socket(s) 2.
23
Satellite receiver (option)
Satellite dish connection
Two aerial sockets Y and X
are
These allow you to connect
satellite tuner.
Setting
1.
the LNB
available.
one
or
two satellite dishes to the
frequency
Press the MENU button then the CYAN button.
Frequency with the Δ / Ε button.
2.
Select LNB
3.
If your set is connected with the EURO-ASTRA satellite, you
switch to 9.75G or 10G depending on your satellite dish
type with the Φ / Γ button.
can
If the ASIASAT
satellite, select 10.0 G.
123
Note
:
The satellite tuner is full band 950-2050 MHz.
456
LNB power on/off
789
0
VOL
1.
PR
OK
2.
VOL
3.
MENU
PR
Press the MENU button then the CYAN button.
Select LNB Power with the Δ / Ε button.
If your satellite dish has an external power supply
with an switch, select Off with the Φ / Γ button.
or
is fitted
If not, select On.
Auto programme
All receivable stations in the V/UHF range as well as in the cable
range and the satellite range can be searched for and stored
automatically
1.
with the automatic
programming.
Press the MENU button then the RED button.
Programme with the Δ / Ε button then press the
2.
Select Auto
OK button.
3.
Select Start with the Δ / Ε button.
4.
Enter
a double digit programme number at which
with the Φ / Γ or NUMBER buttons.
Select Range with the Δ / Ε button.
storing
is to
begin
5.
6.
Set the socket to which the satellite dish is connected
from which you want to receive station
with the Φ / Γ button.
frequency range
or
the
signals
It is not necessary to select the system type. Therefore it cannot be
while in Sat-Y/X range mode.
7. Select BS Type with the Δ / Ε button.
changed
8.
Select EURO-ASTRA or ASIASAT with the Φ / Γ button.
EURO-ASTRA for the European satellite, ASIASAT for the
Asian satellite.
Select Execute with the Δ / Ε button.
10.Press the OK button to start auto programming.
9.
If you wish to use a pay TV/satellite decoder please refer to the
'Manual programme' section steps 1, 2, 12 and 13 on the next
page.
24
Satellite receiver (option)
The
program
programming.
edit
mode appears
Exit the
after
agree with the
If not, you can edit the programmes
'Programme edit' section.
You
can now
completing
auto-
the TV/AV button if you
by pressing
programmes assignment.
menu
as
prefer.
you
See the
recall the stored TV programmes with the Δ / Ε
or
NUMBER buttons.
Manual programme
With this menu, you
one satellite station
can
set all the necessary data for receiving
terrestrial station and store it at one
or one
programme number.
1.
Press the MENU button then the RED button.
2.
Select Manual
Programme
with the Δ / Ε button then press
TV/AV
123
the OK button.
Range with
the Δ / Ε button.
3.
Select
4.
Select the socket to which the satellite dish is connected with
the Φ / Γ
Select BS
6.
Select EURO-ASTRA
type
8.
or
ASIASAT
depending
on
your satellite
with the Φ / Γ button.
entered in three
PR
OK
VOL
MENU
Enter the channel number with the Φ / Γ
are
0
VOL
Select Channel with the Δ / Ε button.
A channel number
9.
789
button; Sat-Y or Sat-X.
Type with the Δ / Ε button.
5.
7.
456
or
NUMBER buttons.
PR
digits.
reception condition is not good, select Fine with the Δ / Ε
Change the fine tuning value to set the optimum picture
If
button.
and sound with the Φ / Γ button.
10. Select Name with the Δ / Ε button.
11. Enter the programme name with the Φ / Γ button.
A programme name has five positions and you can use the
letters A to Z, numbers 0 to 9 and symbols +, or blank.
-
Press the OK button to store
position
is called. If you want to
execute the next
step.
12. Select AV in with the Δ
source
To
position, and the next
stop entering the name,
one
/ Ε
button then the desired
input
with the Φ / Γ button.
use a
pay TV/satellite
decoder, please
connect the decoder
to Euro scart socket 1 and select VCR1 if your decoder outputs
a switching voltage on pin 8, if your decoder does not output a
switching voltage please
select AV 1. Select VCR1
or
AV 1 with
the Φ / Γ button.
13. Select Satellite with the Δ / Ε button.
14. Press the OK button.
\
25
Satellite receiver (option)
gain with the Δ / Ε button.
High or Low with the Φ / Γ button.
BS Type is ASIASAT, Low is automatically
15. Select Video
16. Select
If
set.
17. Select Polarizer with the Δ / Ε button.
18. Select the
with the Φ
polarization
/ Γ
button; 18V for
horizontal, 14V for vertical.
19. Select Sound with the Δ / Ε button.
20. Set the sound carrier frequency with the Φ / Γ button.
It can be set from 5.80 to 9.00 MHz.
You
can
also set the
preset frequencies directly with the
NUMBER buttons.
BS
TV/AV
123
456
789
0
VOL
PR
OK
type
EURO-ASTRA
ASIASAT
0
5.80
5.80/5.98
1
6.50
6.30/6.48
2
6.60
6.60
3
6.65
6.80
4
7.02/7.20
7.02/7.20
5
7.38/7.56
7.38/7.56
6
7.74/7.92
7.74/7.92
7
8.10/8.28
8.10/8.28
8
8.46/8.64
8.46/8.64
9
8.82/9.00
8.82/9.00
Button
VOL
MENU
PR
21. In stereo sound
mono
mode,
if the sound is
noisy,
you
can
select
instead of stereo sound.
Select Mode with the Δ / Ε button.
Set Sound 1
Select
or
Sound 2 with the Φ / Γ button.
Expander
with the Δ / Ε button then select On
or
Off
with the Φ / Γ button.
22. Press the MENU button twice.
23. Select the double
programme number with the Φ / Γ
digit
or
NUMBER buttons.
24. Select Store? with the Δ / Ε button.
25. Select Yes to execute
or
No to cancel
storage
with the Φ / Γ
button.
26. Press the OK button.
All the set
reception
data is
now
stored in the selected programme
number.
Repeat steps
3 to 26 for further programmes.
Exit the
menu
Note
Certain satellite programme will require a decoder and a
to the service provider. Please contact your dealer for
:
by pressing
subscription
more
26
information.
the TV/AV button.
<None>
Satellite receiver (option)
Satellite
frequency guide
Frequency
Channel
(GHz)
NO
Frequency
Channel
Frequency
Channel
(GHz)
NO
10G
9.75G
(GHz)
NO
10G
10.698
138
698*
9.75G
948
11.194
030
1194
1444
11.690
092
1690
10.706
139
10.434
140
1940
706*
956
11.202
031
1202
1452
11.698
093
1698
1948
714*
964
11.210
032
1210
1460
11.706
094
1706
10.442
1956
141
722*
972
11.218
033
1218
1468
11.714
095
1714
1964
10.450
142
730*
980
11.226
034
1226
1476
11.722
096
1722
1972
10.458
143
738*
988
11.234
035
1234
1484
11.730
097
1730
1980
10.466
144
746*
996
11.242
036
1242
1492
11.738
098
1738
10.474
145
754*
1004
11.250
037
1250
1500
11.746
099
1746
1996
10.482
146
762*
1012
11.258
038
1258
1508
11.754
100
1754
2004
10.490
147
770*
1020
11.266
039
1266
1516
11.762
101
1762
2012
10.498
148
778*
1028
11.274
040
1274
1524
11.770
102
1770
2020
10.506
149
786*
1036
11.282
041
1282
1532
11.778
103
1778
2028
10.514
150
794*
1044
11.290
042
1290
1540
11.786
104
1786
2036
10.522
151
802*
1052
11.298
043
1298
1548
11.794
105
1794
2044
10.530
152
810*
1060
11.306
044
1306
1556
11.802
106
1802
2052
10.538
153
818*
1068
11.314
045
1314
1564
11.810
107
1810
2060#
10.546
154
826*
1076
11.322
046
1322
1572
11.818
108
1818
2068#
10.554
155
834*
1084
11.330
047
1330
1580
11.826
109
1826
2076#
10.562
156
842*
1092
11.338
048
1338
1588
11.834
110
1834
2084#
10.570
157
850*
1100
11.346
049
1346
1596
11.842
111
1842
2092#
10.578
158
858*
1108
11.354
050
1354
1604
11.850
112
1850
2100#
10.586
159
866*
1116
11.362
051
1362
1612
11.858
113
1858
2108#
10.594
160
874*
1124
11.370
052
1370
1620
11.866
114
1866
2116#
10.602
161
882*
1132
11.378
053
1378
1628
11.874
115
1874
2124#
10.610
162
890*
1140
11.386
054
1386
1636
11.882
116
1882
2132#
10.618
163
898*
1148
11.394
055
1394
1644
11.890
117
1890
2140#
10.626
164
906*
1156
11.402
056
1402
1652
11.898
118
1898
2148#
10.634
165
914*
1164
11.410
057
1410
1660
11.906
119
1906
2156#
10.642
166
922*
1172
11.418
058
1418
1668
11.914
120
1914
2164#
10.650
167
930*
1180
11.426
059
1426
1676
11.922
121
1922
2172#
10.658
168
938*
1188
11.434
060
1434
1684
11.930
122
1930
2180#
10.666
169
946*
1196
11.442
061
1442
1692
11.938
123
1938
2188#
10.954
000
954
1204
11.450
062
1450
1700
11.946
124
1946
2196#
10.962
001
962
1212
11.458
063
1458
1708
11.954
125
1954
2204#
10.970
002
970
1220
11.466
064
1466
1716
11.962
126
1962
2212#
10.978
003
978
1228
11.474
065
1474
1724
11.970
127
1970
2220#
10.986
004
986
1236
11.482
066
1482
1732
11.978
128
1978
2228#
10.994
005
994
1244
11.490
067
1490
1740
11.986
129
1986
2236#
11.002
006
1002
1252
11.498
068
1498
1748
11.994
130
1994
2244#
11.010
007
1010
1260
11.506
069
1506
1756
12.002
131
2002
2252#
11.018
008
1018
1268
11.514
070
1514
1764
12.010
132
2010
2260#
11.026
009
1026
1276
11.522
071
1522
1772
12.018
133
2018
2268#
11.034
010
1034
1284
11.530
072
1530
1780
12.026
134
2026
2276#
11.042
011
1042
1292
11.538
073
1538
1788
12.034
135
2034
2284#
11.050
012
1050
1300
11.546
074
1546
1796
12.042
136
2042
2292#
11.058
013
1058
1308
11.554
075
1554
1804
12.050
137
2050
2300#
11.066
014
1066
1316
11.562
076
1562
1814
11.074
015
1074
1324
11.570
077
1570
1820
Note
11.082
016
1082
1332
11.578
078
1578
1828
a.The mark
11.090
017
1090
1340
11.586
079
1586
1836
11.098
018
1098
1348
11.594
080
1594
1844
11.106
019
1106
1356
11.602
081
1602
1852
Display
10G
9.75G
Display
11.114
020
1114
1364
11.610
082
1610
1860
11.122
021
1122
1372
11.618
083
1618
1868
11.130
022
1130
1380
11.626
084
1626
1876
11.138
023
1138
1388
11.634
085
1634
1884
11.146
024
1146
1146
11.642
086
1642
1892
11.154
025
1154
1154
11.650
087
1650
1900
11.162
026
1162
1162
11.658
088
1658
1908
11.170
027
1170
1170
11.666
089
1666
1916
11.178
028
1178
1178
11.674
090
1674
1924
11.186
029
1186
1186
11.682
091
1682
1932
Display
1988
:
these
*
is not to receive
with
frequencies
a
10
GHz LNB.
b. The mark # is not to receive
these
frequencies
with
a
9.75
GHz LNB.
c.
Further information
on
satel-
lite programmes is obtainable
from the appropriate magazines
or
your dealer.
27
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement