LG BC970NW Owner's manual

LG BC970NW Owner's manual
NICAM/Hi-Fi STEREO
Video Cassette Recorder
OWNER'S MANUAL
MODEL: BC970NW
PAL
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Position your VCR so that no
sunlight falls directly onto it.
Precaution&fs
Informatin
bright light
Just to
or
name a
extraordinary
few
examples
of the
features:
Care should be taken not to expose your
VCR to any unnecessary vibration,
moisture, dust or heat.
electrical storms it is advisable to
During
the aerial cable and mains
damage
Do not
to
unplug
both
?
prevent accidental
to your VCR and TV.
operate your VCR if it is damaged.
Your VCR should not be
except qualified service
Never
plug
remove
the back
repaired by
personnel.
?
anyone
?
of your VCR as this
voltage and other haz-
cover
?
expose you to very high
ards. If your VCR does not operate properly, please
check the Troubleshooting Check List (see p. 33). If
can
your VCR still does not operate
and call your dealer.
properly, unplug
placed
in
a
position
system
?
Logic
(easy) operations
(see p. 29)
Energy Saving Function
Programmable 80
?
Child Lock
?
Auto Head Cleaner
?
Auto Power
channel memory with
?
ez
to
allow
?
2
on
on
and
Play
Fine still, Frame
advance & Fixed Slow
functions
(Automatic
Memory
System)
?
Real Time Counter
Channel
?
Quick Start function
7 event/1 month
?
programmable timer
Long Play
recording & playback
Digital Shuttle Controls
ICON OSD (On Screen
Display)
-
PAL
& Picture Search
ACMS
?LP
?
playback
TV
tuner
?
?
Ensure that your VCR is
a free flow of air.
?
Frequency synthesised
it
NTSC
HQ (High Quality)picture enhancement
?Auto
Tracking System
Digital Stereo decoder
for reception of NICAM
Stereo & Mono sound
-
?
Hi-Fi Audio
?
Simulcast
&
System
Recording
Playback
Welcome to LG
Thank you for
buying
this LG video cassette recorder Model BC970NW.
Description
2-5
Precaution & Features information
2
Remote Control Location & functions
4
Your VCR's Controls
5
Setting Up
6-15
6
Connecting to a TV
7
Connecting to your Hi-Fi & Camcorder
Tuning in a video channel On your TV 8 9
How to Using the main menu
10
11
Tuning in TV Stations Automatically
12-13
Tuning in TV Stations Manually
14
Changing the order of TV Stations
15
Deleting TV Stations
-
Basic
Operations
Playback a tape
CM(Commercial Message) skip
OPR(Optimum Picture Response)
Other Playback features
Recording TV programmes
To set the Colour System
Setting the Clock Manually
16-23
16-17
17
Advanced
Operations
Recording Using On Screen
Display
Energy Saving
On Screen Display
Tape Counter Memory Stop
TableofCnts
24-33
Timer
Child Lock
Memory
24-25
26
26
27
27
Shut-Off
28
Video Doctor
28
ez
29
(Self-Diagnosis)
(easy) Operations
Hi-Fi Stereo Sound System
Simulcast Recording & Playback
Helpful
Hints
Tape Copying
Specifications
Troubleshooting
30
31
32-33
32
32
Check List
33
17
18-19
20-21
22
23
3
Your video recorder (VCR) is designed so that almost all of its features can be controlled from the
REMOTE CONTROL HANDSET. Some features can also be controlled from the FRONT PANEL
of the video recorder. The maximum operating distance that you may control your video recorder
is about 7.5 metres (25 feet). It must also be within an angle of 30 degrees either side of the
REMOTE SENSOR on the front of your video recorder.
RemotCnrl Locatin&fus
To avoid
batteries
possible battery leakage, remove the batteries if you do not plan to use the remote
period of time. Do not use batteries of differing age or type. Always discard
extended
safely.
POWER
on or off
EJECT
Ejects tape
EJECT
CLEAR
Reset
tape
counter to
Switches to
a
p.
P/STILL
still picture
REW
Rewinds the
OK
STOP
REC/
ITR
Programme
123
p. 20
456
21)
Numbered buttons
To select channels.
number information on
FF
PLAY
tape.
to
iDisplays
P/STILL
REW
REC/ITR
recording (see
i
789
TV/VCR
0
CM SKIP
LP
AV
C.LOCK
VCR;
correctly
positioned.
Replace the cover.
to
monitor, view playback
or
view the VCR's tuner
TV; to watch TV or view another
programme while recording
another programme (see p. 21)
ez
AA
POWER OFF
(see
p.
29)
PLAY
To play the
tape
STOP
To stop the
tape
ez
POWER OFF
ez
REPEAT
LP
To select the
the tape
p.
17)
recording
recording speed
C.LOCK
Switches the Child Lock
off (see p. 27)
ez
4
play
CM SKIP
To fast forward picture search
through 30 seconds of a
AUDIO/VIDEO MODE
Select input source for
TV/VCR
are
on screen menu
FF
Winds the tape forwards
Forward high speed picture
recording (see
screen.
2. Put the two batteries
into the compartment
making sure the + and
CURSORS
To adjust tracking.
To control on screen display
information, channel up & down
selection and vertical tremble
during picture still.
CLK/CNT
high speed picture play.
Starts instant
1. To insert them, push
the tab backwards and
lift off the cover of the
handset.
AA
CLEAR
display.
26 to 27)
on screen
(see
Reverse
POWER
zero
OK/CLK/CNT
Calls the
Your REMOTE CONTROL
HANDSET is powered by
two AA type batteries.
3.
from
an
To switch the VCR
To install batteries:
--
damage
control handset for
REPEAT
(see
p.
29)
on
of
and
ABC970NW
4iS1L_58X
Each button
on
your VCR has the
same
function
as
its
button
corresponding
on
the
remote control handset.
Cassette
Stop & Tape
Eject
Compartment
POWER
(On/Off)
POWER
STOP/
REC/ITR
Controls
PLAY
(instant record)
REW
FF
EJECT
AV2
VIDEO IN
Video IN
socket
L-AUDIO-IN-R
Audio IN
(L/R)
sockets
REC
PROG.
Channel
/ITR
VCR
P/STILL
TV/VCR
Remote
TV/VCR
Programme Display Control
sensor
P/STILL
Selectors
Mains Lead
AUDIO IN/
AERIAL
OUT(R/L)
(Connect the aerial
using this socket)
Terminals
AERIAL
R-AUDIO-L
VIDEO
OUT
OUT
IN
IN
RF.OUT
VIDEO IN/OUT
Terminals
AV1
RF. OUT
(Connect to your
TV using
this terminal)
5
YourVCR's
The
on the next two pages is the most common forms of connection. However
your manufacturers instruction books for specific information. Make sure all
connections are made with both your VCR and additional appliance unplugged from the mains
to avoid damaging your equipment.
guidance given
please check with
ToaTV
Conecting
Aerial
The
quality of the sound and
picture can be greatly influenced
by the positioning, quality and
state of repair of your external
aerial.
Back view of your VCR
your VCR very
first time
Following picture will
Using
display
on
the TV
To AUDIO
To
OUT
VIDEO
(R/L)
OUT
All connections
must be made
screen
L
with both your
VCR and TV
when you have just
connected your video
unplugged
recorder for the very first
"ACMS"
(see
as
shown
p.
11).
IN
AV1
Aerial Connection
Television
IN
ACMS
OKi
6
(75 ohms)
Do not
try and
into
To
Pr-12
Cable
force the connector
AUDIO
ACMS
IN
To VIDEO IN
tuning TV
stations, please follow
3 to 4
OUT
RF.OUT
To make
stages
VIDEO
OUT
from
the mains.
time.
R-AUDIO-L
(R/L)
plug
place, it should
in easily.
ABC970NW
4iS1L_58X
An audio system can be connected to the
AUDIO OUT terminals on the back of
your VCR.
Please remember to turn the
volume to minimum on your Hi-Fi, then
gradually increase the volume; this will
prevent damaging your speakers and
save you from an extremely noisy shock!
Make sure all connections are made with
both your VCR and camcorder unplugged
from the mains to avoid damaging your
equipment. To make connecting your
camcorder easier we have designed the
Audio IN (Left and Right) and Video IN
terminals on the front panel of your VCR.
Camcorde ToyurHi-F& Conecting
Hi-Fi
REPEAT
1
AL
RANDOM
PROGRA
OVER HI-
DIS
RECORD
RE
FLA
PO
ROC
STEREO
AB
DUBB
5678
9101112
13141516
CLASSI
AUTO
AUTO
SYNC
1234
MEMORY
EO
SLEEP
LE
NR
MUTE
AM
AM
KHz
KHz
UBB
PM
PM
MHz
MHz
DSP
DISCO
LIV
HAL
60
160
400
1K
2.5K
6.3K
16kHz
POWER
STOP/
EJECT
AV2
VIDEO IN
L-AUDIO-IN-R
PROG.
Audio Left &
Right
Lead
Back view of your
VCR
Audio Left &
Right
Lead
AERIAL
UD
VIDEO
OUT
OUT
IN
IN
RF.OUT
AV1
Video Lead
Audio out terminals & RCA Leads
The RCA terminals for connecting your VCR to your Hi-Fi are on the back of the set; L
R
Right sound output. You normally have to select the AUX function on your Hi-Fi.
Camcorder
=
Left sound
output,
=
7
Your TV receives signals from the video recorder (VCR) like another TV station.
You have to select a channel number on your TV and tune it in so that you may watch
video tapes.
If you have used AUDIO and VIDEO cables then your TV should already have a dedicated video channel built into it, usually called AV.
Tunig a Videochanl OnyourTV
The
Make
VCR
as
in this book.
Press POWER to turn
used
by
pre-recorded
and press PLAY
remote control.
on
on
the
FF
PLAY
STOP
Turn
on
your TV.
Select
(VCR)
EJECT
already
POWER
if the
a
TV channel
number on which you
wish to watch video's.
station,
distorted, you
picture
Don't worry if you don't
have a video-tape to play
is
can
at this
the transmitter
stage!
channel of your VCR.
Stages 5 8 will show
If you switch your VCR
on and continue stages
you how to
3
~
change
the
4, instead of seeing
~
output frequency of your
video
VCR.
TV until you
blue screen.
8
Tune this channel until
the video
picture
is
sharp
Store this channel
your TV.
on
and the sound is clear.
P/STILL
another TV
or
change
a
tape into your VCR
REW
is set at UHF channel 36.
If channel 36 is
Insert
video
your VCR.
output frequency of
this video recorder
that you have
installed your
described earlier
sure
correctly
playback
tune your
see a
bright
If you have used a
AUDIO and VIDEO
You will need to look at
cables you will not have
you do not know how to
do this.
to tune your
simply
TV,
select the AV
channel. The AV channel
is already pre-tuned for
optimum video playback
on
your TV.
the TV instruction book if
ABC970NW
4iS1L_58X
Only carry out stages
5~8ifyoucannot
obtain clear video playback
as
stages
1
Hold down PROG
or
the front of your VCR
for more than 4 seconds.
on
PressPROG or to
Select
select another video
number
channel.
STOP/
EJECT
POWER
STOP/
EJECT
TV channel
AV2
number on which you
wish to watch video's.
VIDEO IN
PROG.
VIDEO IN
blue
that
L-AUDIO-IN-R
Make
sure
that your VCR
(only the
clock will be
displayed)
by pressing
POWER
the remote control.
on
CH36 will appear in the
VCR
display.
You may select any
channel number between
22 and 68.
The
be
following picture will
displayed on the TV
screen.
channel on your TV you
will be unable to view
on
and record video
Press
on
the front of
your VCR when you
have finished.
POWER
STOP/
EJECT
AV2
VIDEO IN
RF
PR
CHANNEL
:
dedicated
on
your
TV. If you do not tune in
a dedicated video
PROG.
your TV.
is in STANDBY
a
video channel
screen
Store this channel
L-AUDIO-IN-R
that
successfully
tuned in
appears.
AV2
L-AUDIO-IN-R
bright
so
sure
you have correctly
installed your VCR
and
Tune this channel
4.
~
a
a
Make
which you
wish to watch video's.
on
described in
POWER
Select
TV channel
a
PROG.
36
i
9
tapes!
This VCR
The
How to
Usingthemau
Switch
on your TV set
and video recorder by
can
button.
among
easily
be
programmed by using
the
displayed
menus
on screen.
controlled from the REMOTE CONTROL HANDSET.
Press i button.
The main
appear
EJECT
on
menu
Press F and G to select
Press i to
the desired
menus
menu.
will
the TV
the
screen.
screen.
Press OK and press D
E to select.
or
CLEAR
i
OK
remove
from the TV
POWER
OK
CLK/CNT
OK
i
i
CLK/CNT
CLK/CNT
12
Pr-12
REC
PR
ACMS
AUDIO
O
O
O
English,
Russian, Deutsch,
Francais, and Polski.
O
O
O
O
10
REC
Timer
ON
OFF
TIME
DATE
-
-
Manual
-
-
AB
C
OSD
DR
REC
OKi
AUDIO -To select the channel for audio output (see p. 30).
To select the channel of audio output according to
your TV type ("B/G" for PAL B/G TV, "D/K" for PAL
D/K TV)
O F.OSD ON/OFF
To display the operational mode of your VCR
O
-
-
O
-
-
VCR
OPR
recording setting (see p. 24 to 25).
tuning setting (see p. 12 to 13).
ACMS ACMS (Automatic Channel Memory System) (see p. 11).
TIME DATE
Date & clock setting (see p. 23).
SYSTEM To set the Colour TV System (see p. 22).
ABC OSD To change the language setting for OSD (see left).
DR To check a problem with your VCR (see p. 28).
PR
SYSTEM
NIC
fOSD
select the
language
the POWER
pressing
LANGUAGE
SELECTION
You
can
menus are
O
OPR
NIC
-
-
(see p. 26).
To improve the playback picture (see p. 17).
To activate or deactivate the NICAM digital sound
(see
p.
30).
If the TV broadcast
to store them
signal is weak your VCR may not detect the necessary information and will be and
correctly. To overcome this problem please turn to the MANUAL TUNING section on
page 12 to 13.
Press POWER to turn
on
Press i.
Press OK
your VCR.
again to start
tuning
the automatic
The main
menu
the TV
on
appear
will
process.
TABLE will appear when
tuning is complete.
screen.
Press i to
Press F
or
G
Automaicly TVStaions Tunig n
The TV STATION
save
your
settings.
to select
the ACMS.
Press OK.
CLEAR
EJECT
POWER
OK
i
CLK/CNT
CLEAR
OK
OK
12
Pr-12
REC
PR
ACMS
ON
OFF
SYSTEM
NIC
fOSD
AUDIO
TIME
DATE
AB
C
VCR
OSD
DR
CLK/CNT
Pr-12
ACMS
OKi
OPR
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
ACMS
S
Pr-12
ACMS
i
i
CLK/CNT
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
E
Pr-12
OKi
ACMS
i
PR
PR-07
PR-08
MOVE
:
DELETE
:
,
OKi
11
In certain
of the country broadcast signals may be too weak for your VCR's automatprocess to find or assign TV stations correctly.
You must tune in these weaker broadcast stations manually in order for your VCR to
store them.
ic
M
a
n
u
l
y
Tunig n TVStaions
areas
tuning
Press i.
Press i.
Press OK.
it locates
The main
menu
on
appear
Press F
will
the TV
or
screen.
a
The station table will
Enter the channel number
appear.
of station that you want
to tune with the numbered
the station
buttons.
DorE.
G to select
CLEAR
the PR.
OK
will
Searching
stop when
station.
Control the fine
tuning of
by pressing
i
EP
123
CLK/CNT
Press OK.
CLEAR
456
Press D
OK
i
example,
CLK/CNT
12
Pr-12
REC
PR
ACMS
AUDIO
PR
01
ON
OFF
TIME
DATE
SYSTEM
AB
C
OSD
C--
AV
C.LOCK
PR
MFT
--
STATION
-
-
-
-
-
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
PR
CH
05
C06
00
PR-05
07
C02
06
C07
00
PR-06
08
12
LP
07).
i
CLK/CNT
CM SKIP
0
OKi
07
PR
PR
OK
789
TV/VCR
DR
OPR
CH
E to select
VCR
NIC
fOSD
or
the programme number
that you want to tune (for
CLEAR
i
PR
--
--
--
--
MFT
--
STATION
-----
PR
CH
MFT
07
C02
+04
STATION
-----
-----
MOVE
:
DELETE
:
,
OKi
PR
i
PR
i
Press G to select and
press OK.
Press D or E to select
letters and numbers for
the new station name.
PressForGtomove
back and forth between
characters.
Press i, confirm the
Press i
station
the
placement.
again
menus
to
remove
from the TV
screen.
If you wish to manually
tune other stations
Your
new
TV station has
been tuned into your
VCR.
1-7.
repeat stages
now
Press OK.
CLEAR
CLEAR
OK
OK
i
OK
i
i
OK
i
CLK/CNT
CLK/CNT
CLK/CNT
CLK/CNT
01
PR
CH
MFT
07
C02
+04
STATION
-
C02
00
PR-01
02
C03
00
03
C04
00
PR-02
PR-03
C05
C06
PR
CH
MFT
STATION
04
05
07
C02
+04
TV2
06
C07
00
00
00
07
C02
+04
08
--
PR-04
PR-05
PR-06
TV2
--
-----
MOVE:
PR
OK i
PR
OK i
PR
DELETE
:
,
OKi
13
After
tuning
TV stations into your VCR you may wish to change the order in which they
having to retune them against! The instructions given on this page will
are
stored without
show you how you
Changi theord f TVStaions
Press i.
can
simply
them into your desired order.
move
Press i.
Press D
or
E to select
the programme number
The main
menu
on
appear
Press F
will
the TV
or
Press D
screen.
G to select
or
E to select
the programme number
you want to move
example, PR 03).
you want to move to
example, PR 05).
(for
Press OK.
The selected programme
will be moved to the new
programme number.
(for
If you wish to move other
TV stations repeat
the PR.
1
stages
Press G.
-
4.
Press OK.
Press i to
CLEAR
OK
OK
the
remove
from the TV
menus
CLEAR
i
screen.
i
CLK/CNT
CLK/CNT
01
02
C02
00
PR-01
C03
C04
00
00
PR-02
PR-03
04
C05
00
PR-04
05
00
06
C06
C07
00
PR-05
PR-06
07
C08
00
PR-07
08
C09
00
03
12
Pr-12
REC
PR
ACMS
AUDIO
TIME
DATE
SYSTEM
AB
C
OSD
DR
PR
NIC
fOSD
ON
OFF
VCR
OKi
OPR
PR
01
PR
01
PR
14
CLEAR
OK
OK
CLK/CNT
CLK/CNT
PR-08
MOVE
:
DELETE
:
,
i
i
OKi
C02
00
PR-01
01
C02
00
PR-01
02
C03
00
PR-02
02
C03
00
03
C04
00
PR-03
03
00
00
04
C05
C06
00
PR-02
PR-03
PR-04
01
C02
00
02
C03
00
PR-02
03
00
04
C05
C06
00
PR-03
PR-04
05
PR-01
CH
MFT
STATION
04
C02
+04
TV2
05
C05
C06
00
PR-04
PR-05
05
C04
00
PR-05
C04
00
PR-05
06
C07
00
PR-06
06
C07
00
PR-06
06
C07
00
PR-06
07
C08
00
PR-07
07
C08
00
PR-07
07
C08
00
08
C09
00
PR-08
08
C09
00
PR-08
08
C09
00
i
PR
OKi
PR
OKi
PR
PR-07
PR-08
MOVE
:
DELETE
:
,
OKi
After
TV stations into your VCR you may wish to delete a station.
given on this page will show you how easily delete any unwanted TV stations.
tuning
The instructions
Press i.
Press i.
Press i to
Press F.
The main
menu
Press F
will
the TV
on
appear
or
Press D
screen.
or
E to select
the programme number
you want to delete.
After
short while, the
a
TVStaions Delting
the
remove
from the TV
menus
screen.
How to selecting
Stored TV
stations:
selected station will be
If you wish to delete
other TV stations repeat
deleted.
G to select
thePR.
1
stages
-
Stored TV stations
be selected in
either of two ways.
Press D or E to select
different stations that are
tuned into your VCR.
can
3.
Press OK.
CLEAR
OK
CLEAR
i
CLK/CNT
OK
i
CLK/CNT
CLEAR
You may also directly
select stations using the
numbered buttons on
the remote control.
CLEAR
CLEAR
OK
OK
i
OK
12
Pr-12
REC
PR
ACMS
ON
OFF
SYSTEM
AB
C
OSD
CLK/CNT
i
VCR
CLK/CNT
DR
CLK/CNT
PR
NIC
fOSD
AUDIO
TIME
DATE
i
OKi
OPR
123
C02
00
PR-01
01
02
03
01
PR
01
00
PR-01
01
C02
00
PR-01
C03
00
PR-02
PR-03
02
C03
00
PR-02
02
C03
00
03
C06
00
PR-02
PR-03
04
00
PR-04
00
00
PR-05
PR-06
00
PR-05
PR-06
PR-04
PR-05
06
C04
C07
00
00
TV2
C04
C07
C04
C07
+04
05
06
04
05
C02
04
05
PR-03
PR-04
03
STATION
C05
C06
00
MFT
C05
C06
00
CH
06
C08
00
PR-06
07
C08
00
PR-07
07
C08
00
PR-07
07
C09
00
PR-08
08
C09
00
PR-08
08
PR
C02
i
PR
C09
00
MOVE
:
DELETE
:
00
00
--
OKi
PR
DELETE
:
789
TV/VCR
PR-07
--
-----
08
PLEASE WAIT
,
456
MOVE:
,
OKi
PR
DELETE
:
,
OKi
15
0
CM SKIP
You will
Playbck
eject video cassettes when your VCR is plugged into the mains.
playback recordings from NTSC tapes (on PAL TV).
Getting a better picture
When a cassette is inserted and playback started, the automatic tracking function works to get
the best possible picture automatically. If the quality of the recording is poor, repeatedly press
or
on the remote control to manually adjust the tracking until any distortions have been
removed. Press numbered 0 on the remote control to switch automatic tracking back on again.
only
be able to load and
Your VCR may also
a tape
Make
VCR
that you have
connected your
described earlier
sure
correctly
as
in this book.
Insert the video cassette
Press PLAY to start
Press P/STILL to still
into your VCR.
playing
picture.
your tape.
The video cassette
Press P/STILL
to advance
the tape frame by frame.
repeatedly
P/STILL
should have the window
a
REW
FF
PLAY
Turn
your TV and
select the video channel
for video playback.
on
side
facing up and
arrow facing away
the
STO P
from
REC
you.
If you load
a
video
If you hold down P/STILL,
the picture will be slowed
down at about 1/19 times
the normal playback.
cassette which has had
Press POWER to turn
your VCR.
on
its record
removed
protection tab
(playback of the
P/STILL
REW
FF
PLAY
cassette will start
STOP
automatically).
EJECT
POWER
AUTO TRACKING
Your VCR will automati-
cally adjust the tracking
to give the best picture
quality.
REC/
can be paused for
up to 5 minutes. After 5
minutes your VCR will
stop the tape to prevent
damaging the tape or
your VCR
Tapes
.
Still picture quality can
be improved slightly by
pressing D or E.
CLEAR
OK
CLK/CNT
16
i
Press PLAY to continue
Press STOP to end
playing
playback.
your tape.
Picture search:
During playing back
press either FF or REW
P/STILL
REW
to this will enable you to
rapidly
wind the
times normal
see
the
FF
P/STILL
REW
FF
PLAY
STOP
This feature enables you
during playback of a tape
This feature
to
break in
skip
a
commercial
a
REC/
then
few seconds,
normal
resume
automatically
improves playback
picture quality by
adjusting your VCR to
the condition of the
tape.
playback.
Press i.
Press EJECT.
While
tape.
Logic search:
During fast forwarding or
rewinding press and hold
FF or REW the picture
will be played back at 7
times normal playback
speed.
OPR (Optimum
Picture Response):
PLAY
tape (7
are on
(Commercial
Message) Skip:
STOP
playback)
where you
CM
EJECT
tape is playing
press CM SKIP on the
remote control to skip
commercial
POWER
(or another
material).
programme
Press F
or
G to select
OPR.
Press OK.
CLEAR
TV/VCR
If the end of the
0
CM SKIP
tape is
RE
Repeatedly
press
CM SKIP to
skip:
OFF
SOFT
SHARP
reached, your VCR will
stop playback automatically,
rewind, stop, eject the
tape and place itself into
1 Press
30 seconds
Press D
2 Press
60 seconds
power off mode.
to select:
3 Press
90 seconds
SHARP.
4 Press
120 seconds
5 Press
150 seconds
6 Press
180 seconds
12
TIME
DATE
SYSTEM
AB
C
VCR
OSD
DR
NIC
OPR
ON
AUDIO
OFF
i
OPR
or
E
OFF,
repeatedly
SOFT
Please note you may
OPR when
playing
Press i return to
a
or
only set
tape.
screen.
17
Your VCR
Other
for your
Playbckfeturs
incorporates a number
particular recording.
During playing back or
picture press j or k
repeatedly to obtain
different playback
speeds.
still
Press
or
to
of
tape search features that enable you
improve
Press PLAY to
tape back
picture quality.
play
your
to
quickly
search
Press STOP.
STOP will appear for a
few seconds on the TV
screen.
P/STILL
P/STILL
REW
FF
PLAY
REW
OK
OK
i
FF
PLAY
STOP
i
STOP
CLK/CNT
CLK/CNT
You
can
reach the
following playback
speeds.
(-7xplay, -3xplay, -play,
still, 1/19 slow, play,
2xplay, 7xplay)
To switch off the slow
motion and shuttle, press
the desired function.
During
slow motion and
shuttle, the noise bars
may appear
on
the
picture according
status of
18
tape.
to the
REC/
QSR
REC/
tape
at normal
speed.
CLEAR
CLEAR
a
Fast Forward
(FF):
Rewind
(REW):
Press FF.
Press REW.
The
The
tape will rapidly wind
tape will rapidly wind
forwards.
backwards.
FF will appear for a few
seconds on the TV
REW will appear for a
few seconds on the TV
screen.
screen.
P/STILL
P/STILL
REW
FF
REW
REC/
FF
PLAY
PLAY
STOP
STOP
REC/
19
Your VCR allows you to make recordings using a variety of simple methods:
Instant Timer Recording (ITR) start recording immediately for a set period of time
video cassette
Recording TVprogames
Make
VCR
that you have
connected your
described earlier
sure
correctly
as
Press POWER to turn
your VCR.
video cassette
tab into
your VCR.
Press
to select
or
the programme number
you wish to record.
facing up and
arrow facing away
CLEAR
the
receiver
using
from
set the
OK
sky
satellite
the VIDEO
IN(L/R)
pre-set number
"SC", "AV1"
i
pressing
CLK/CNT
You may also directly
select programme
number
using
the
numbered buttons
the remote control.
the
on
of
or
"AV2"
to
by
the "AV" button.
AV
on
SC01 Hi-Fi Sound only
recording using the
AUDIO IN terminals on
the front of your VCR.
AV 1 Sound and Picture
the video
123
cassette.
456
possible
or
LP
POWER
the back
It is
decoder
C.LOCK
happen
quite easily by
accident!)
record
If you wish to record
external video from a
IN and AUDIO
should have the window
side
EJECT
protection
edge
on
until the
you.
tape (this
tab
a
protection
The video cassette
can
remove
Insert
with
or
out.
in this book.
If you do not
wish to record
on a
runs
to
789
on a
video cassette
TV/VCR
0
recording using the
VIDEO IN and AUDIO IN
(L/R)on the back of your
VCR.
CM SKIP
AV 2 Sound and Picture
recording using the
with the record
protection tab
removed by
covering the
VIDEO IN and AUDIO IN
(L/R) on the front of your
hole with self
VCR.
adhesive tape.
20
Your VCR
incorporates Long Play (LP) which enables you to record up to twice the amount of
video cassette. For example an E-180 will record up to 180 minutes using Standard
Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be a
slight loss in picture and sound quality when using LP.
time
on a
Press LP if you wish to
Press REC/ITR to start
Press P/STILL to avoid
record in
recording.
recording
Standard
Long Play
Play.
or
SP will
produce improved
and sound quality,
however LP will provide
twice as much recording
as
SP.
SPorLPwillbe
to let you
know which you have
selected.
displayed
.
Press STOP to end
Remember you
can record one
recording.
programme while
scenes.
RECORD will appear
the TV screen.
Press EJECT.
on
picture
time
unwanted
Press P/STILL to continue
EJECT will appear
recording.
Press REC/ITR several
times. Each successive
press will increase the
record time by 30 minutes
until you reach a
maximum of 9 hours.
watching another
by starting your
instant recording, press
Tapes
can
be
for
paused
up to 5 minutes; RECP
will be displayed when a
tape is paused. After
5
minutes your VCR will
stop recording
damaging
the
to prevent
tape or
your VCR.
TV
on
the
TV/VCR to select TV
screen.
mode and then
If the end of the
tape is
a
reached, your VCR will
stop recording
automatically, rewind,
stop, eject the tape and
place
your TV.
6
789
TV/VCR
itself into power off.
FF
PLAY
STOP
REC/
FF
EW
PLAY
TV/VCR
0
CM SKIP
EJECT
P/STILL
STO P
LP
AV
REC/
POWER
REW
FF
PLAY
ITR
C.LOCK
12
0
LP
P/STILL
REW
selecting
different channel
STOP
REC/
QSR
21
CM SKIP
AV
on
Your VCR is
equipped
with
colour standard, you
triple
can
play
back
a
tape in PAL B/G and
SECAM D/K.
your VCR detects the colour system automatically.
colour problem please select the colour system manually.
During playback
If there
Tosethclurym
are
Press i.
Press OK.
The main
will
menu
on
appear
Press D
the TV
screen.
or
E to select
menus
COLOUR
system used.
screen.
selection,
PA L: PAL
recordings.
CLEAR
i
CLK/CNT
CLEAR
OK
CLK/CNT
12
Pr-12
PR
ACMS
AUDIO
22
ON
OFF
TIME
DATE
NIC
OPR
SYSTEM
AB
C
VCR
OSD
DR
SYSTEM
i
RE
AUDIO
AUTO
PAL
NIC
MESECAM
OFF
OPR
SYSTEM
AB
C
OSD
VCR
DR
SYSTEM
i
OK
recordings
MESECAM: MESECAM
fOSD
the
AUTO: automatic colour
i
CLK/CNT
the SYSTEM.
REC
remove
from the TV
CLEAR
G to select
OK
Press i to
to the
CLEAR
OK
Press F
or
according
i
CLK/CNT
i
Press i.
Press F
or
Use the numbered
buttons on the remote
control or press D or E
G to select
TIME DATE.
to alter the
Press OK.
and YEAR.
If you make a mistake
press F or G and enter
the correct details.
HOURS,
MINUTES, DAY, MONTH
OK
e.g. 1pm
displayed
The
day
Press i.
Your
are
CLK/CNT
new
CLEAR
OK
13:00.
settings
i
will be
as
clock
stored and will
appear on your video
recorder's display.
CLEAR
Please note your VCR
uses a 24 hour clock.
Manu l y
i
CLK/CNT
of the week will
appear automatically
when you enter the year.
123
CLEAR
456
OK
i
789
TV/VCR
:.
-
-
--
--
--
8
---
:.
00310100MON
.
.
12
12
TIME
DATE
CM SKIP
HHMMDDMMYY
HHMMDDMMYY
--
0
i
TIME
DATE
i
23
Setinghclok
You may set up to seven timer record events within one month of the current date PLEASE
NOTE! before setting the timer make sure that you have set the VCR clock correctly and
you know which stations you have tuned TV stations on your VCR.
Timercodng UsingOScreDplay
Insert
with
a
video cassette
protection
Press i.
Press OK to start
tab into
Press F
your VCR.
setting
the timer record event.
or
G to select
REC.
record.
The video cassette
OK
should have the window
side
facing up and
facing away
arrow
Press the numbered
buttons to enter the
station that you wish to
Press OK.
i
123
CLK/CNT
456
the
from
789
R
you.
If all timer record events
OK
i
CLK/CNT
arefullpressDorEto
When
select the event that you
wish to remove and
press 0 first, then the channel
number; for example Stations
replace.
3
-
selecting
by pressing
video from
12
Pr-12
TIME
DATE
AUDIO
ON
OFF
PR
SYSTEM
OK
i
REC
DATETIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
DELETE:
24
.
a
satellite receiver
the "AV" button
CLK/CNT
on
the remote
control.
--
--
DR
OPR
--
--
VCR
OSD
OKi
--
--
AB
C
NIC
or
using the VIDEO IN and AUDIO
IN(L/R) set the pre-set number
to "AV1" or "AV2" by pressing
CLEAR
ACMS
9,
If you wish to record external
event.
PR
-
Once selected press G.
Press F to delete the
fOSD
stations 1
03. You may also select
Channels
REC
SKIP
CM
0
TV/VCR
--
--
--
--
--
--
--
,
PR
SP
SP
SP
SP
SP
SP
SP
OK i
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
PR
--
--
--
--
--
--
--
SP
NRTV
DATE
TIME
--
--
SP
--
--
--
SP
--
--
--
SP
--
--
--
SP
--
--
--
SP
--
--
--
SP
--
--
--
i
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
i
If at
If Timer record
later date you wish to delete or change any of the settings in timer event memory you may
without having to enter all the timer event information again. Simply display the timer
event screen. Press D or E to select the event that you wish to delete or change.
a
do
events
so
Make
Press F to delete the event...or
Press OK to change; then press F or G to select; Station, Date, Start and End times and LP.
Press D or E to enter the correct information.
Overlap...
sure
that the
preset times of the
timer
not
recording events
overlap. If they do,
do
the earlier programme
always be given
will
Press the numbered
buttons to enter the date
of the programme.
Press the numbered
buttons to enter the
recording start and end
times of the programme
that you wish to
123
Press F
or
G and press
DorEifyouwishto
record in Long Play.
0
CM
DLY To record every day
(except Saturday and
Sunday) at the same
time.
same
PR
NRTV
To record at the
time every week.
DATE
--
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
::
--
--
~
Example:
Programme 1 is
programmed to start
at
16:00 and end at 17:00.
123
you have
entered incorrect
456
and will need to re-enter
Programme 2 is
programmed to start
the data.
16:30 and end at 18:00.
Press POWER to switch
(In
789
--
--
--
--
--
SP
SP
SP
SP
SP
SP
CM
0
TV/VCR
SKIP
your VCR
1pm will
displayed as
e.g.
entirety,
13:00.
NRTV
or
CLEAR
TIME
16
19002000
::
SP
::
SP
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
--
--
--
::
--
--
~
--
the last
EJECT
2 will be
PROGRAMME 1
POWER
OK
PR
DATE
--
only
17:00
16:00
i
CLK/CNT
.
~
but
Programme
recorded.)
be
--
OK i
Standby.
30 minutes of
You may also select the
the start and end times
by pressing
at
this case, Programme
1 will be recorded in its
Please note your VCR
uses a 24 hour clock.
PR
--
SP
DLYSUMOTUWETHFRSA
--
priority.
correct.
displayed,
SKIP
If you press OK before
entering the date you
may select one of the
following automated
recording features. Press
F or G to select, then
press OK to confirm.
Weekly
are
If PLEASE CHECK is
789
TV/VCR
event details
Press i twice.
record.
456
Check that the timer
NRTV
SP
SP
SP
SP
SP
DATE
TIME
16
19002000
::
SP
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
REC.
i
18:00
SPEED
:
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
--
--
--
--
TIMER will appear in the
video recorder's display
16:30
while your VCR waits to
make the recording.
SP
SP
SP
SP
PROGRAMME 2
(This portion
recorded)
SP
SP
i
25
will not be
ABC970NW
4iS1L_58X
Your VCR has
EnergySavin OnScreDisplay
Energy Save feature
place your VCR into an
You may
an
which if set will
tape
year, day of week,
programme channel, tape speed and
operational mode of your VCR on the TV
screen. If a recording is taking place
these On Screen Displays will not be
recorded onto the tape.
will not work.
Press POWER
on
the
Press POWER
VCR
on
the
and your
VCR will go into Energy
again
The VCR and clock will
Save.
appear on the video
recorder's display.
All indicators will turn off
or
day, month,
economic power save where the clock
display will disappear. If you have
programmed a recording, this feature
VCR.
easily display the current time
counter and amount of tape left,
Press OK/CLK/CNT to
After 3 seconds the
display.
display
leaving
will clear
only
the clock
or
tape
counter and amount of
CLEAR
OK
tape left
i
on
the TV
screen.
CLK/CNT
in the video recorder's
display.
Press POWER to switch
off
Energy
Save.
Press OK/CLK/CNT
VCR
Function/
Channel
Tape speed
Programme
STOP
SBS
again to
displays
remove
all
from the TV
screen.
SP
CLEAR
24.02.00 THU
12:00
OK
i
CLK/CNT
Day/Month/
Year/Day of
Week
Clock/Tape
Counter &
Amount of
Tape Left
Press OK/CLK/CNT
repeatedly
to
display
tape counter and
of tape left.
the
amount
If you have set the
OSD ON/OFF to
OFF in the main
menu, function
OSD(On
Screen
will not be
26
Display)
displayed.
The
Digital Tape Counter can be
displayed on your TV screen instead of
the time by pressing OK/CLK/CNT on
the remote control. The Digital Tape
Counter indicates the relative positions
of recordings on the tape.
Press OK/CLK/CNT.
Press STOP when
Press CLEAR to set the
playback or recording
complete.
counter to 0:00:00.
Press PLAY
or
start
tape
Press REW.
counter will
the actual
display
play
time in hours, minutes
and seconds.
The
tape will rewind and
automatically stop
when
the counter returns to
0:00:00.
VCR
can
can
on
the front of the
be switched off
only
be
so
that your
the
operated using
ChildLock
remote control.
SAFE will appear
the TV
Press C.LOCK
on
again
to
switch off the child lock.
screen.
SAFE will
disappear
SAFE will flicker in your
video recorder's display
for a few seconds.
on
None of the buttons on the
front of your VCR will work
(except STOP/ EJECT)
video recorder's
the TV
screen.
OFF will flicker in your
for
a
display
few seconds.
If any buttons on the
front of your VCR are
pressed SAFE will flicker
in your video recorder's
display for a few seconds.
CLEAR
OK
VCR
Press C.LOCK.
is
recording.
The
The control buttons
i
CLK/CNT
P/STILL
REW
OK
FF
i
PLAY
LP
AV
CLK/CNT
ST
C.LOCK
P/STILL
REW
FF
PLAY
STO P
REC/
27
TapeCountrMmyS
VIDEO DOCTOR
Automatic Memory Shut-Off
This feature of your VCR enables you to
switch off your VCR automatically after
tape rewind has been completed.
MemoryShut-Of
(Self-Diagnosis)
This feature informs you that there is
problem with your VCR. These error
messages will appear
on
a
the TV
screen.
VideoDctr(Slf-agns)
Press POWER
during
tape rewind.
The
tape will rewind
to
Press i.
beginning and your
VCR will automatically
Press F
switch itself off.
DR.
PressDorEtochecka
the
or
problem.
G to select
HEAD STATUS
O PLEASE CLEAN:
Clean your video
heads.
Press OK.
TAPE STATUS
O NOT RECORDABLE:
Insert a tape with its
protection tab in place
EJECT
POWER
NO. OF TIMER PROGRAMME
OK
O
i
CLK/CNT
2Shows the number of
timer
recording.
NEXT TIMER PROGRAMME
O 1 26 10:00~11:00
Shows the current status
of timer recording.
12
Pr-12
REC
PR
ACMS
AUDIO
ON
OFF
TIME
DATE
SYSTEM
AB
C
OSD
VCR
VCR
DR
Press i.
DR
NIC
fOSD
OPR
OKi
VIDEO DOCTOR
HEAD STATUS
TAPE STATUS N
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
VCR
DR
28
OK
i
(easy) power off
Rewind
Sequence of "Stop
Eject
Power Off is operated automatically by
pressing ez POWER OFF.
(easy) repeat
By pressing & holding ez REPEAT
during playing back, the holding section
is replayed twice automatically.
ez
ez
"
During playing
press
ez
back
POWER OFF.
Your VCR will be
ed
as
the
operat-
following
;
During playing back,
press & hold ez REPEAT
at the point where repeat
play
is to be concluded.
Then, your VCR is started
TV/VCR
CM SKIP
0
STOP
LP
reverse
search.
AV
C.LOCK
TV/VCR
CM SKIP
0
LP
ez
POWER OFF
ez
AV
REPEAT
C.LOCK
eOperations z(easy)
Release ez REPEAT at
the point where repeat
play is to start.
The
holding section
replayed twice
automatically.
Pressing
is
ez
REPEAT
again
during repeat play,
return to normal
REWIND
ez
POWER OFF
ez
REPEAT
play.
EJECT
POWER
OFF
29
Your VCR will record and
Hi-Fi stereo sound. In addition it has
playback
a
stereo NICAM
digital
stereo sound decoder. This allows you to record and playback the sound in several different
ways. Video cassettes recorded on your VCR will have a normal mono audio track and two
VHS Hi-Fi stereo audio tracks. These stereo tracks allow you to make audio recordings in Hi-Fi
a TV broadcast, stereo audio system, video disc or another Hi-Fi VCR.
Hi-FStero Soundystem
stereo mode from
Your VCR is fitted with
a
Switch
on
your VCR.
Press
NICAM stereo decoder to
obtain the benefits of
digital
stereo sound
or
to select
Press i.
The choice is
(on
stations that transmit
Press F
stereo
AUDIO.
sound).
or
G to select
L-CH
R-CH
STEREO,
(left channel),
(right channel) and
MONO.
The
of
particular type
sound received
recorded will be
displayed
screen
on
or
CLEAR
briefly
a
OK
the TV
couple
i
of
CLK/CNT
CLK/CNT
seconds:
STEREO NICAM
Sound is
automatically
recorded
on
and
mono
video
the Hi-Fi stereo
tracks of the
tape.
12
MONO
Pr-12
REC
The sound is recorded
on
PR
ACMS
AUDIO
ON
OFF
TIME
DATE
SYSTEM
AB
C
OSD
VCR
DR
NIC
fOSD
AUDIO
i
OPR
the Hi-Fi tracks and the
mono
track of the video
without any
tape
separation.
STEREO
RE
AUD
30
12
LEFT
TIME
DATE
RIGHT
NIC
MONO
SYSTEM
AB
C
OSD
VCR
DR
AUDIO
i
CLEAR
OK
CLK/CNT
Press OK.
that
OK
for
Press i.
AUDIO.
i
i
ABC970NW
4iS1L_58X
This feature enables you to simulcast sound transmitted
transmitted by the TV station.
by
audio
an
Simulcast Stereo
TV
or
receiver to the left and
right
and the
picture
Playbck
Recording
Connect the stereo tuner
<Audio>
To AUDIO OUT
source
Press AV to select
SIMULCAST
(SC).
AUDIO INPUT
the
connectors
(AV2)
front
of the VCR.
panel
on
(L/R)
sockets
Adjust the stereo sound
quality on your stereo
tuner
or
receiver.
Other
operations are
for general
recording.
the
same as
AERIAL
R-AUDIO-L
Simulcast Stereo
VIDEO
OUT
OUT
IN
IN
.OUT
To AUDIO IN
(L/R)
sockets
POWER
VDEOIN
STOP/
EJECT
L-AUD
N-R
PROG.
Playback
AV1
Connect the VCR and
If the VCR is connected
TV.
both to
REC
/ITR
a
stereo TV and
your audio system, turn
on your audio system
P/STILL
TV/VCR
and set the TV sound to
minimum.
Other
operations are the
general play-
same as
back.
31
SRecording& imulcast
A second VCR (for tape copying) should
be connected to the AUDIO IN (L/R) and
VIDEO IN terminals on the front of your
VCR or from the back of your VCR.
Remember to select the appropriate
audio/video mode by pressing the AV
button on the remote control.
TapeCoying Specifatons
General
Power
Power
110-240V~,50/60Hz.
consumption
Video Head
System
Approx.
18 Watts
mode: 3
Watts)
Double azimuth 4
(Energy Saving
heads, helical
scanning.
Tape speed
23.39 mm/sec
(SP mode)/
(LP mode).
Tape width 12.7 mm (0.5 inch).
4 hours (SP mode, E-240 tape)/
8 hours (LP mode, E-240 tape).
Approx. 65 (+/-10) sec.(E-180 tape).
360x94x270mm(WxHxD)
3.4 Kg.
11.69 mm/sec
Tape
format
Maximum
recording
time
Rewind time
Dimensions
Back view of your VCR
Place the blank video tape
that you wish to record ON
into this VCR
Weight
Operating temperature
Operating humidity
Timer
A
R-AUDIO-L
OUT
IN
IN
RF.OUT
All connections
must be made with
both your VCR's
and TV unplugged
from the mains
system
CCIR standard
type.
(625 lines,
signal
Recording format
RF reception
PAL/MESECAM
RF OUT
PAL G/K
Input
level
PAL/SECAM
VIDEO IN
1.0
RCA Lead
you will be able to
enjoy stereo sound
when playing tapes
35oC
50
fields)
PAL/SECAM colour
AV1
IfyouuseaRCA
lead picture quality
will be improved and
-
Less than 80%.
24 hours display
Video
Television
VIDEO
OUT
5oC
Output
Signal
level
to noise ratio
RF Modulator
Vp-p,
(B/G, D/K)
(RCA type)
75
Ohm, unbalanced
VIDEO OUT
(RCA type)
1.0
Ohm, unbalanced
Vp-p,
75
More than 43 dBm.
UHF 22-68
(Adjustable).
Audio
Input
The
design and
specifications are
subject to change
VIDEO IN
without notice.
Back view of playing
VCR
Place the video tape that
you wish to record FROM
into this VCR
level
Output
level
AUDIO IN
(RCA type)
-6.0
more
AUDIO OUT
-6.0
Track
dBm,
than 47 kohms
(RCA type)
dBm, less than
Frequency
response
Normal: 100 Hz-10 kHz
(-6/+3 dB)
(-3/+3 dB)
Normal : More than 43 dB (at SP mode)
Hi-Fi : More than 70 dB (at SP mode)
Hi-Fi : More than 80 dB (at SP mode)
Hi-Fi: 20 Hz-20 kHz
Unauthorised
recording
of
copyrighted
TV programmes, film, video
rights of copyright
cassettes and other materials may infringe the
owners and be contrary to copyright laws
32
Signal
1 kohms
Mono track & Hi-Fi track
to noise ratio
Dynamic range
Video Head
Cleaning
Whenever
a
cleaned. This should
However dirt
accumulating
picture
deposit
to become blurred
no
picture
&
sound
on
mean
Check
Is the mains
the head after
plug plugged
another channel,
in and switched on?
Video
Is the cassette compartment
cassette
Are you
round?
maybe
a
weak
signal.
picture
points
empty?
to insert the cassette the
or
Is the mains
Is the VCR switched
If you have used a RCA lead to connect your VCR
and TV have you selected the AV channel on your
not work
Check the batteries in remote control.
TV?
The
Is the video cassette
carry out Automatic
Are the TV channels tuned in
Have you tried
using
on
your
Tuning again
properly?
an
top of
the playback
picture is
unstable
another cassette?
Can you minimise the noise bars to
Can you get
a
picture
on
programmes
Are the aerial leads and
between your VCR and TV connected?
recorded
Are the TV channels tuned in
Has the
safety
tab
on
removed to prevent
Try another station,
RF connector lead
properly?
Auto
damaged,
have you tried
control on your TV.
Check the aerial. Is it connected?
Play
sure
that you are
your TV.
channel
on
Has the
safety
using
or
damaged?
a
video TV
tab been removed from the video
does not
cassette?
work
Is the child lock switched
No Hi-Fi
Switch "AUDIO" in the
the video cassette been
recording?
maybe a weak signal
in and switched on?
on
using another one?
Adjust the horizontal
Make
special
way
Check for local interference
the TV?
cannot be
plug plugged
Check the aerial. Is the cable broken
acceptable
levelwith0,D orE?
TV
right
damaged?
Remote
tuning,
CheckList
playback
normally
control does
Check
playback
cannot be
not
inserted
Have you tuned in a video channel
TV to watch video on?
poor
tapes will
Check
trying
the
can cause
Symptom
Check the aerial. Is the cable broken
No
of time
points
Check the aerial. Is it connected?
or
long period
a
or
Is the TV switched on?
Try
or ejected from your VCR the video head is
that additional head cleaning should not be necessary.
broken up. High quality video cassette
dirt onto the video head, but old or damaged tapes might.
Symptom
No
video cassette is inserted into
automatically
on
menu
mode?
to STEREO.
sound
Check the aerial. Is it connected to the TV?
No NICAM
Make
sound
"AUTO" for the station to be recorded.
sure
"NIC"
in the main
menu
is set to
recording
33
Troubleshting
P/N: 3834RP0058X
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement