LG DC-2050W Owner’s Manual

LG DC-2050W Owner’s Manual
DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
DC-2050W
PAL
Before
connecting, operating
or
adjusting this product,
carefully and
read this instruction booklet
please
completely.
Safety Precautions/Important
notes on
controlling
CAUTION
Notes
copyrights:
by
law to copy, broadcast, show, broadcast
via cable,
play in public, or rent copyright material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
on
It is forbidden
RISK OF ELECTRIC SHOCK
DO NOT OPEN
this unit
(OR BACK)
discs.
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
an
shock to persons.
This
product incorporates copyright protection technology that
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
is
SERIAL NUMBER: The serial number is found
on
the back of
this unit. This number is
The exclamation mark within
an
equilateral triangle
is intended to alert the
important operating
user to the presence of
and maintenance (servicing)
instructions in the literature
accompanying
the
product.
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
___________________________________
___________________________________
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
Features:
TRIC
?
Complete versatility
Tapes.
to
?
Watch
recording
?
Remote controls both DVD and VCR decks.
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
CLASS 1
KLASSE 1
LASER PRODUCT
LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT
?
?
CAUTION:
This
To
Digital
ensure
manual
Video Disc
proper
carefully
use
Player employs
of this
Use of
controls, adjustments
specified
Laser
product, please
and retain for future
require maintenance, contact
see service procedure.
other than those
a
an
System.
read this owner's
reference, should the unit
authorized service location-
prevent direct exposure
or
the
performance
of
procedures
herein may result in hazardous
to laser
beam, do
not
try
vases, shall be
placed
on
the
VHS
TV show to the VCR.
a
(unless
DVD is copy
protected
Macrovision).
Important
notes on
controlling
this
unit
This unit
uses one
set of controls to
operate both DVD
following buttons are helpful
successfully controlling each part.
1
2
in
POWER Button
Press the POWER button
front
CAUTION: The apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
as
or
Hi-Fi Stereo VCR.
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
such
DVD while
audio CDs
and VCR. The
radiation exposure.
To
a
play DVD, VCDs,
Records from DVD to VHS
with
LASER
panel
to turn
on
the remote control
or
on
this unit.
on
the remote control when you
DVD Button
Press DVD button
want to control the DVD.
The DVD indicator will
apparatus.
display
3
light
on
the front
panel
to show that the DVD is selected.
VCR Button
Press the VCR button
on
the remote control when
you want to control the VCR.
The VCR indicator will
display
4
light
on
the front
panel
to show that the VCR is selected.
DVD/VCR button
Press the DVD/VCR button
toggle
2
to
on
the front
panel
control between the DVD and the VCR.
to
Table of Contents
Introduction
SafetyPrecautions.........................2
2
Important notes on controlling this unit.
.
.
.
.
.
.
.
.
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
.
RemoteControl............................7
RearPanel................................8
Preparation
Connections............................9-10
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
.11-15
BeforeOperation-VCRpart.
.11
TuninginavideochannelonyourTV.
.11
UsingyourVCRveryfirsttime.
SettingtheclockManually.................12
Tosetthecoloursystem..................12
Howtousingthemainmenu...............13
.13
TuninginTVstationsAutomatically.
.14
TuninginTVstationsManually.
.15
ChangingtheorderofTVstations.
DeletingTVstations......................15
.16-19
BeforeOperation-DVDpart.
GeneralExplanation......................16
On-ScreenDisplay.......................16
InitialSettings........................17-19
Initial Settings General Operation.
17
Language..........................17
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................17
Sound.............................18
Others............................18
ParentalControl......................19
Operation
OperationwithTape.....................20-22
Playingatape..........................20
.20
CM(CommercialMessage)Skip.
.20
OPR(OptimumPictureResponse).
.21
InstantTimerRecording(ITR).
Timer recording using On Screen Display.
22
.23-25
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............23
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Operation with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
NotesonMP3/WMARecordings
.
.
.
.
.
26-27
.
.
.
.
.
.
.
.
.
.
26
.26
Pause.............................27
MovingtoanotherTrack...............27
RepeatTrack/All/Off..................27
Search.............................27
Random...........................27
RepeatA-B.........................27
3DSurround........................27
.27
ChangingtheAudioChannel.
OperationwithJPEGDisc...................28
ViewingaJPEGdisc.....................28
MovingtoanotherFile.................28
.
.
.
.
.
.
.
.
.
.
StillPicture.........................28
Toflipthepicture.....................28
Torotatepicture......................28
.28
NotesonJPEGRecordings.
ProgrammedPlayback.....................29
Programmed Playback with Audio CD and
.
.
.
.
.
.
.
.
.
.
.
MP3/WMAdisc.........................29
.29
ProgrammedPlaybackwithVideoCD.
.29
RepeatProgrammedTracks
.29
ErasingaTrackfromProgramList.
.29
ErasingtheCompleteProgramList.
.30-31
AdditionalOperation-VCRpart.
OnScreenDisplay.......................30
TapeCounterMemoryStop................30
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ChildLock.............................30
.30
VideoDoctor(Self-Diagnosis).
ez(easy)repeat.........................30
Hi-FiStereoSoundSystem................31
.32
AdditionalOperation-DVDpart.
LastConditionMemory...................32
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ScreenSaver...........................32
SpecialRecording.........................33
CopyingfromDVDtoVCR.................33
33
Recording from another video recorder
.
.
.
.
.
.
.
Reference
Troubleshooting..........................34
LanguageCodeList.......................35
CountryCodelist.........................36
Specification.............................37
GeneralFeatures........................23
MovingtoanotherTITLE...............23
23
Moving to another CHAPTER/TRACK
.
.
.
.
SlowMotion.........................23
Still Picture and Frame-by-Frame Playback
24
Search.............................24
Random...........................24
.
.
.
About the
.
.
Repeat............................24
RepeatA-B.........................24
symbols
for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
TimeSearch........................24
3DSurround........................24
Zoom..............................25
MarkerSearch.......................25
SpecialDVDFeatures....................25
TitleMenu..........................25
DiscMenu..........................25
CameraAngle.......................25
.25
ChangingtheAudioLanguage.
.25
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles...........................25
3
INTRODUC
Before Use
Disc-related terms
Discs
Playable
Title
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
Chapter (DVD only)
Sections of a picture
Audio CD
(8cm/12cmdisc)
addition, this unit
can
play
audio
titles, MP3, WMA
or
or
accompanying
feature content
or a
musical
piece
that
are
smaller
than titles.
DVD-R, DVD±RW,
a
Kodak PICTURE CD and CD-R
or
additional feature content, or music album. Each title
is assigned a title reference number enabling you to
locate it easily.
Video CD
In
(DVD only)
DVD
CD-RW that contains
JPEG files and SVCD also.
A title is
composed of one or several chapters. Each
assigned a chapter number, enable you to
locate the chapter you want. Depending on the disc, no
chapters may be recorded.
is
chapter
Notes
--
Depending
ment
some
or
--
the conditions of the
CD-R/RW
played
--
on
recording equip(or DVD-R/±RW) disc itself,
(or DVD-R/±RW) discs cannot be
the CD-R/RW
on
CDs
irregular shaped
octagonal). It may result in
or
use
Notes
on
(Video
Sections of
(the
(e.g., heart-shaped
malfunctions.
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be avail-
On
Regional
player
player is designed and manufactured
for playback of region "2" encoded DVD soft2
ware. The region code on the labels of some
DVD discs indicates which type of player can play those
discs. This unit can play only DVD discs labeled "2" or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
4
on a
a
video CD
track
number,
video CD with PBC
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
Types
There
of video CDs
are
two
PBC
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
with the
This DVD
only)
piece
assigned
musical
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
Video CDs. Some DVDs made for business purposes
may not be played on the unit.
and DVDs
or a
Scene
Video CDs
code of the DVD
CD and audio CD
picture
you to locate the track you want.
or other functions may be added.
Refer also to the instructions applied with the DVDs and
able,
a
audio CD. Each track is
or an
enabling
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
Track
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Video CDs not
Before Use
(Continued)
Storing
Precautions
After
the unit
Handling
discs
playing,
store the disc in its
case.
When
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
The
light,
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
the unit
setting
picture and sound of a nearby TV or radio may be
distorted during playback. In this case, position the unit
The
away from the TV or radio,
removing the disc.
To
keep
Do not
near
or
turn off the unit after
volatile
liquids,
such
as
leave marks
on
a
long period
ter out.
plastic products in
of time. They will
the surface.
To clean the cabinet
soft, dry cloth. If the surfaces
soft cloth
use
thinner,
or
are
moistened with
lightly
solution. Do not
benzine,
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
the unit
Cleaning
a
discs
insecticide spray,
the unit. Do not leave rubber of
use a
Cleaning
temperature
the surface clean
use
contact with the unit for
Use
as there may be a considerable
increase inside the car.
strong solvents,
as
these
a
extremely dirty,
detergent
mild
such
as
might damage
alcohol,
the surface
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
About
records.
vinyl
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
5
INTRODUC
Front Panel and
Window
Display
Tape Eject
Forward
Go to NEXT
chapter/track.
Skip/Scan,
Fast-Forward
forward search. Winds the
Pause
playback temporarily
/ press
(
)
Press and hold for two seconds for
repeatedly
for
a
fast
tape forwards.
PAUSE/STEP (
/
)
frame-by-frame playback.
STOP(A)
Stops playback.
VCR Record
Go to
beginning
of current
Reverse Skip/Scan, Rewind (
)
chapter/track or to PREVIOUS chapter/track.
Press and hold for two seconds for
a
fast
POWER
Switches the unit to ON
or
OFF.
Disc Tray
Insert a disc here.
reverse
search. Rewinds the
DVD OPEN/CLOSE
Opens
or
(
tape.
)
closes the disc
tray.
Tape Compartment
Video 2 Jack
Audio 2
(L/R)
PLAY
Display
Jacks
-
menu
( G)
playback.
status of the unit.
selection.
DVD/VCR Selector
FGDE(left/right/up/down)
an item in the menu (FGDE).
DVD to VHS
Select
-
Starts
Shows the current
ENTER
Acknowledge
window
Copy
Button
Remote Sensor
Select channel programme of VCR
Point the remote control here.
(PROG. DE).
Indicates current title number
Programmed playback
Indicates
CHPTRK
active.
repeat mode.
Indicates current
Bilingual
MP3 disc is inserted.
chapter
or
track number
A disc is loaded in the DVD deck. (Lights when a disc is
loaded in the DVD deck and flashes when no disc is loaded.)
mode
Indicates total
VCR deck is
selected.
playing time/elapsed
The current TV show
DVD deck is
selected.
or
DVD to VHS copy is in progress
VCR
Video
CD is
inserted.
recording
VHS
engaged
a
tape is playing
Cassette-In indicator
A timer
is
21.)
or
VCR MP3
DVD RPT ALL AB
VCD
TV
6
is
The Hi-Fi track of
Indicates TV
mode.
(See Notes on
page
time/current time
video is broadcast in stereo
PROG TITLE CHPTRK
BIL
STEREO COPY
REC
Hi-Fi
recording
programmed
in progress
Child Lock is
engaged
Remote Control
DVD/VCR select button
Selects
operational
OPEN/CLOSE
EJECT
Open or close the the disc
mode of remote
control.
POWER
Switch this unit ON
or
-
OPEN/CLOSE
EJECT
POWER
TV/VCR
CLK/CNT
Shows you the current time
DVD
DISPLAY
or
counter.
CLK/CNT
-
Select
an
item in the
Select channel programme of VCR.
SETUP/ i
Access
or remove
setup
the title
menu
-
ENTER
RETURN
PLAY
FORWARD
PROGRAM
PAUSE/STEP (
)
playback temporarily / press
repeatedly for frame-by-frame
playback.
STOP(A)?
Stops playback.
?
a
subtitle
C.LOCK ANGLE
ZOOM
Mark any
REPEAT RANDOM
A-B
SEARCH
REPEAT CM SKIP
LP
camera
angle
?
Winds the
tape forwards.
Press and hold button for about
two seconds.
Reverse SKIP/SCAN (
)/
Rewind
Search backward* / go to beginning
of current chapter or track or go
to previous chapter or track.
Rewinds the tape.
Press and hold button for about
PROGRAM
Access or remove program menu.
CLEAR
Clear a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
?
?
-
?
if available
on
tape.
two seconds.
-
CHILD LOCK
Switch the Child Lock
into
-
*
menu.
ANGLE
Select DVD
ez
point during playback.
MARKER SEARCH
sources
-
?
language.
MARKER
input
PLAY (G)
Starts playback.
SEARCH
?
language (DVD) or
audio channel (CD).
Select
Display
-
a menu.
SUBTITLE
video CD
?
AUDIO SUBTITLE MARKER
audio
an
a
Forward SKIP/SCAN (
)/
Fast Forward
Search forward* / go to next
chapter or track.
-
*
0-9 numerical buttons
AUDIO
of
CLEAR
Pause
an
menu.
menu
-
available.
Select
setup
the
-
of the disc if
Select numbered items in
DVD disc.
with PBC.
?
BACKWARD
a
Remove the
Displays
REC/ITR
Record your
REC/ITR
TITLE PAUSE/STEP STOP
?
into
recording
RETURN
SELECT
menu.
TITLE
Display
DISC MENU
-
SETUP
/ i
for
SELECT/ENTER/OK
Acknowledge menu selection.
OK
menu
source
DISC MENU
Access menu of
AV
Display.
FGDE(left/right/up/down)
-
VCR
input
tape.
Switch between your TV's tuner and
the VCR's internal tuner.
DISPLAY
Tape Eject.
AV
Select
OFF.
TV/VCR
Access the On-Screen
tray.
-
?
and off.
REPEAT/ez REPEAT
-
-
?
Repeat chapter, track, title,
ez
all.
REPEAT
A-B/LP
-
-
Repeat sequence.
Select the recording
speed
of the
tape.
?
RANDOM/CM SKIP
Play tracks in random order.
CM SKIP
-
-
?
ZOOM
Enlarge
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
the buttons.
Distance: About 23 ft
remote
Angle:
remote
AAA AAA
(7 m)
from the front of the
battery
video
image.
installation
Detach the
battery
the remote
control, and insert
cover on
(size AAA) batteries
aligned correctly.
sensor
with
the
rear
of
two R03
and
About 30° in each direction of the front of the
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel
AUDIO IN
(Left/Right) (VCR IN AV1)
signals from an external
Receive the audio
AUDIO OUT
Connect to
source
to VCR.
(Left/Right) (DVD/VCR OUT)
amplifier, receiver or stereo system.
an
COMPONENT VIDEO OUT
Connect to
a
(Y Pb Pr) (DVD
inputs.
EXCLUSIVE
OUT)
TV with Y Pb Pr
AUDIO OUT
Connect to
(Left/Right) (DVD EXCLUSIVE OUT)
amplifier, receiver or stereo system.
an
AERIAL
Connect the aerial
using
this
jack.
Pr
R
Pb
L
Y
OPTICAL
out
(Digital
audio
jack)
Connect to
audio
digital (optical)
equipment.
AC Power Cord
Connect to
COAXIAL
a
Connect to
VIDEO IN
a
(VCR
(DVD/VCR OUT)
TV with video inputs.
IN
Receive the video
S-VIDEO OUT
Connect to
RF.OUT
a
(DVD
AV1)
signals
from
EXCLUSIVE
TV with S-Video
(DVD/VCR OUT)
using this jack.
Connect to your TV
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
source.
(Digital audio out jack) (DVD EXCLUSIVE OUT)
digital (coaxial) audio equipment.
Connect to
VIDEO OUT
power
an
external
OUT)
input.
source
to VCR.
Connections
Tips
Depending
to
Component
on
your TV and other equipment you wish
are various ways you could connect
connect, there
the unit.
Please refer to the manuals of your TV, Stereo
or other devices as necessary to make the
For better sound
this unit's
AUDIO OUT
of your
reproduction, connect
jacks to the audio in jacks
directly to the TV.
input channel.
Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
sure
this unit is connected
2
Set the TV to the correct video
--
Connecting
jacks
the TV
an
corresponding
in
jacks
on
on
Y Pb Pr cable.
Connect the Left and
the unit to the audio
Right AUDIO OUT jacks of
left/right in jacks on the TV
the audio cables.
S-Video connection (for DVD)
1
Caution
Make
Connect the COMPONENT VIDEO OUT
the unit to the
using
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page 10.
--
1
2
best connections.
(Color Stream ) connection
(for DVD)
using
System
Video
Connect the S-VIDEO OUT
this unit to the
S-Video in
S-Video cable.
jack
on
the TV
Connect the Left and
this unit to the audio
using
jack on
using the
Right AUDIO OUT jacks of
left/right in jacks on the TV
the audio cables.
to a TV
Make
one of the following connections, depending
capabilities of your existing equipment.
When using the COMPONENT VIDEO OUT jacks,
on
Rear of this unit
(DVD
exclusive out
connection)
the
set TV's INPUT to COMPONENT VIDEO.
When
using
the S-VIDEO OUT
jack,
set the TV'
Pr
R
Pb
L
s
INPUT to S-VIDEO.
Y
Basic connection
1
(AV)
Connect the VIDEO
OUT to the video in
jack on this unit's DVD/VCR
jack on the TV using the video
cable.
2
Connect the Left and
on
the TV
using
Basic connection
1
Right AUDIO jacks of this
left/right in jacks
unit's DVD/VCR OUT to the audio
the audio cables.
Rear of TV
(RF)
AERIAL
VIDEO
INPUT
S-VIDEO INPUT
Connect the antenna cable from your indoor/ outdoor antenna to AERIAL jack on the rear panel of
COMPONENT VIDEO INPUT
Pr
Pb
AUDIO INPUT
Y
L
R
this unit.
2
Connect the
RF.OUT
jack
supplied
on
the
television's Antenna
RF antenna cable from the
panel
Input.
rear
of this unit to your
Pr
R
Pb
L
Y
Rear of this unit
(Basic connection)
9
PREATION
Connections
Connecting
to
(Continued)
Optional Equipment
Notes
--
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II /Pro Logic
Connect the Left and
Right AUDIO OUT jacks on this
unit to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
channel
1
Connect this unit's DIGITAL AUDIO OUT
(COAXIAL or OPTICAL) to
jack on your amplifier. Use
optical) audio cable.
jack
corresponding in
digital (coaxial or
the
a
You will need to activate this unit's
2 (See "Digital
Digital
A
Audio
Output"
on
digital output.
18).
page
Multi-channel sound
digital multi-channel
quality. For this
connection
provides
the best
sound
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
will be in DTS
selected.
Rear of this unit
Pr
R
Pb
L
Y
2 channel
analog
stereo
or
Dolby
Pro
Logic
II / Pro
Logic
connection
Digital
Both DVD and
multi-channel
DVD exclusive out
VCR out
connection
(DVD exclusive
out connecttion)
L
R
COAXIAL
AUDIO INPUT
Amplifier (Receiver)
10
DIGITAL INPUT
OPTICAL
DIGITAL INPUT
If the audio format of the
the
capabilities of
produce a strong,
--
To
see
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the
On-Screen
Display,
press AUDIO.
Before
Tuning
Operation
in
a
VCR part
-
video channel
on
your TV
6
Press PROG. 3
more
or
4 on the front of your VCR for
than 4 seconds.
RF36 will appear in the display window.
following picture will be displayed on the TV
Notes
The
The
output frequency of this video recorder
(VCR) is set at UHF channel 36. If channel 36
is already used by another TV station, or if the
picture is distorted, you can change the
transmitter channel of your VCR. Stages 5
8
will show you how to change the output
frequency of your VCR.
screen.
~
Your TV receives
recorder
have to select
signals
channel number
7
your TV
and tune it in so that you may watch video
tapes. If you have used AUDIO and VIDEO
a
on
Make
8
2
on
Insert
a
your TV.
pre-recorded
video
tape into your VCR
watch video's.
Don't worry if you don't have a video-tape to play at
this stage! If you switch your VCR on and continue
stages 3 4, instead of seeing video playback tune
~
3
see a
bright
blue
Tune this channel until the video
screen.
picture
is
Select
a
TV channel number
sharp
on
which you wish to
watch video's.
POWER
appears.
Store this channel
and press PLAY on the remote control.
Select a TV channel number on which you wish to
your TV until you
4 to select another video channel.
on
the front of your VCR when
you have finished.
Tune this channel so that
your VCR.
on
or
can
Press
that you have correctly installed your
described earlier in this book.
Press POWER to turn
Turn
Press PROG. 3
also set it to "OFF" if there is any interferwhen your TV is connected to the VCR with a
RCA lead.
sure
as
i
ence
called AV.
VCR
36
You may select any channel number between 22
and 68.
You
cables then your TV should already have a
dedicated video channel built into it, usually
1
CHANNEL
from the video
like another TV station. You
(VCR)
RF
PSET
R
on
a
bright
blue
screen
your TV.
Note
Make
sure
VCR and
that you have correctly installed your
successfully tuned in a dedicated video
channel
on your TV. If you do not tune in a
dedicated video channel on your TV you will be
unable to view and record video
tapes!
and the sound is clear.
If you have used a AUDIO and VIDEO cables you
will not have to tune your TV, simply select the AV
channel. The AV channel is
optimum
video
playback
on
already pre-tuned
for
your TV.
Using your VCR very
Following picture
4
Store this channel on your TV.
You will need to look at the TV instruction book if
you do not know how to do this.
out
Only carry
stages
5 clear
video playback
5
as
Select
a
8 if you cannot obtain
4.
described in stages 1
display
on
the TV
screen
when you have just connected your video recorder
for the very first time.
To make
tuning
3 to 4
shown "ACMS"
as
TV stations,
~
TV channel number
will
first time
please follow stages
(see p.13).
~
on
which you wish to
watch video's.
Make
sure
POWER
be
that your VCR is in
the remote control
on
standby pressing
(only the clock will
displayed).
ACMS
Pr-12
ACMS
OKi
11
PREATION
Before
Setting
Operation
the clock
-
VCR part
To set the colour
Manually
The clock in your VCR controls time and date
settings for your VCR.
1
Press i.
1
Press 1
or
2 to select TIME DATE.
Press OK.
--
:.
-
-
--
--
--
Press i.
2
The main
3
Press 1
Press 3
4 system
HHMMDDMMYY
---
.
system
menu
will appear
on
the TV
screen.
or
2 to select the SYSTEM and press OK.
or
4 to select
according
to the COLOUR
used.
12
TIME
DATE
2
i
Use the numbered buttons
to alter the
on
the remote control
HOURS, MINUTES, DAY, MONTH and
YEAR.
REC
fOS
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The
day
of the week will appear
automatically
ON
OFF
AUTO
PAL
MESECAM
E
SYSTEM
AB
C
OSD
VCR
Dr.
SYSTEM
i
OPR
when
5
you enter the year.
Press 1
or
2 to select the RF AUDIO.
Press 3
or
4 to select
according
to the RF AUDIO
used.
HHMMDDMMYY
8
:.
0010103WED
.
12
TIME
DATE
i
REC
fOS
ON
OFF
3
4
If you make a mistake press 1
correct details.
Press i.
12
or
RF I/I
RF B/G
RF D/K
E
SYSTEM
AB
C
OSD
VCR
Dr.
SYSTEM
i
OPR
2 and enter the
6
Press i to
remove
the
menus
from the TV
screen.
Before
How to
Operation
using
-
VCR part
the main
Tuning
menu
This VCR
menus
The
can easily be programmed by using
displayed on screen.
menus are
the
controlled from the Remote
Control Handset.
1
2
If the TV broadcast
by pressing
Press i button.
menu
will appear
on
the TV
screen.
Automatically
is weak your VCR may
signal
not detect the necessary information and will not
be able to store them correctly. To overcome this
problem please
Switch on your TV set and video recorder
the POWER button.
The main
in TV Stations
tion
1
2
on
turn to the MANUAL TUNING
sec-
page 14.
Press POWER to turn
your VCR.
on
Press i button.
The main
Press 1
will appear on the TV
2 to select the ACMS.
menu
or
screen.
Press OK.
12
REC
PSET
R
Pr-12
ACMS
TIME
DATE
SYSTEM
fOSD
ON
OFF
REC
AB
C
VCR
OSD
Dr.
REC
OKi
OPR
12
Timer
recording setting (see p. 22).
PR SET Manual tuning setting (see p. 14).
ACMS ACMS (Automatic Channel Memory
System) (see p. 13).
TIME DATE Date & clock setting (see p. 12).
SYSTEM To set the Colour TV System
(see p. 12).
ABC OSD To change the language setting for
-
Pr-12
PSET
R
REC
ACMS
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
Pr-12
ACMS
fOSD
ON
OFF
-
OPR
OKi
-
-
O
O
-
-
ACMS
OSD.
Pr-12
You
O
O
O
select the
language among
English, Russian, Deutsch, Francais,
Polski, Hungarian and Czech.
Dr. To check a problem with your VCR
(see p. 30).
F.OSD ON/OFF To display the operational
mode of your VCR (see p. 30).
OPR To improve the playback picture
(see p. 20).
can
OKi
ACMS
-
3
Press OK
to start the automatic
again
tuning
process.
-
-
3
Press 1 and 2 to select the desired
4
Press "i" to return to
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
menu.
S
Press OK and press 3
a
or
TV
4 to select.
E
Pr-12
i
ACMS
picture.
4
The TV STATION TABLE will appear when
is complete.
Press i to
save
your
settings.
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
tuning
PR-07
PR-08
MOVE
:
DELETE
:
,
OKi
13
PREATION
Before
Tuning
In certain
Operation
VCR part
-
in TV Stations
areas
of the
4 Searching
Manually
will
stop when it locates
a
station.
Press 2 to select MFT.
country broadcast signals
Press 3
or
4 to
adjust.
may be too weak for your VCR's automatic tuning
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations
manually
1
PR
CH
MFT
09
C10
00
in order for your VCR to store them.
CHANNEL/CABLE
Press i.
:
PSET
R
The main
Press 1
STATION
will appear on the TV
2 to select the PR SET.
menu
or
AV
i
screen.
Press 2 to select STATION
5 your
Press OK.
that you may
so
name
TV station.
Press OK.
PR
C09
12
REC
PSET
R
Pr-12
ACMS
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
OKi
OPR
PR
01
MFT
00
STATION
-
PSET
R
fOSD
ON
OFF
CH
C10
CH
MFT
STATION
C02
00
PR-01
PSET
R
6
Press 3
new
or
station
Press 1
or
OK i
4 to select letters and numbers for the
name.
2 to
move
back and forth between
characters.
CHANNEL/CABLE
:
AV
PSET
R
2
Press OK.
i
Press i.
The station table will appear.
Press 3 or 4 to select the programme number that
you want to tune
(for example,
PR
PR
C09
CH
MFT
STATION
C10
00
ABC
09).
PSET
R
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
7
PR-07
:
DELETE
:
new
TV station has
If you wish to
stages 1 7.
OKi
,
Press i, confirm the station
Press i again.
Your
PR-08
MOVE
OK i
now
manually
placement.
been tuned into your VCR.
tune other stations
-
3
Press OK.
09
Press AV to select C
(Standard stations)
or
S
10
11
(Cable stations):
C02
-
C69, S01
12
13
-
S41.
14
15
Enter the channel number of station that you want
to tune with the numbered buttons
to find the
required
station.
PR
CH
09
C--
MFT
STATION
--
----
CHANNEL/CABLE
P
R SET
14
:
AV
i
or use 3 or
4
16
PSET
R
C10
ABC
00
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
--
--
-----
-----
MOVE
:
DELETE
:
,
OKi
repeat
Before
Operation
VCR part
-
the order of TV Stations
Changing
Deleting
After tuning TV stations into your VCR you may
wish to change the order in which they are stored
without having to retune them. The instructions given
on this page will show you how you can simply move
them into your desired order.
1
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
TV Stations
After tuning TV stations into your VCR you may
wish to delete a station.
The instructions given on this page will show you
how easily delete any unwanted TV stations.
1
screen.
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
12
PSET
R
REC
12
PSET
R
REC
Pr-12
ACMS
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
PSET
R
fOSD
ON
OFF
SYSTEM
AB
C
VCR
OSD
Dr.
PSET
R
OKi
OPR
PR
PR
TIME
DATE
OKi
OPR
01
Pr-12
ACMS
fOSD
ON
OFF
CH
MFT
STATION
C02
00
PR-01
01
CH
MFT
STATION
C02
00
PR-01
CHANNEL/CABLE
CHANNEL/CABLE
AV
:
PSET
R
2
Press i.
Press 3
or
move
3
03).
or 4 to select the programme number
you want to delete. (for example, PR 03)
01
C02
00
PR-01
02
C03
00
PR-02
03
C05
00
PR-03
C06
00
PR-04
C02
00
PR-01
02
C03
00
PR-02
05
C04
00
PR-05
03
C05
00
PR-03
06
C07
00
PR-06
04
C06
00
PR-04
07
C08
00
05
C04
00
PR-05
08
C09
00
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PSET
R
:
DELETE
:
00
02
C03
00
PR-01
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
00
PR-05
06
C06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
3
Press 1.
After a short
deleted.
DELETE
:
OKi
,
while, the selected station will be
OKi
to
PR-08
:
OKi
,
C02
move
PR-07
MOVE
PR-08
MOVE
01
(for example,
C02
00
02
C03
00
PR-02
03
C05
C06
00
PR-04
PR
00
PR-05
C04
00
PR-03
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
C02
00
PR-01
02
C03
00
03
00
04
C05
C06
00
PR-02
PR-03
PR-04
05
06
C04
C07
00
00
PR-05
PR-06
07
C08
00
PR-07
08
C09
00
DELETE
P SET
R
05).
4
PR-01
05
01
PR-08
MOVE
programme number
01
04
4
PR
Press i.
Press 3
01
4 to select the
you want to
AV
i
04
PSET
R
or
2
programme number
(for example,
PSET
R
Press 3
:
PSET
R
i
4 to select the
you want to
Press 2.
PREATION
screen.
:
:
,
OKi
Press i to remove the menus from the TV screen.
If you wish to delete other TV stations repeat
stages 1 3.
-
OKi
Press OK.
The selected programme will be moved to the new
programme number.
If you wish to move other TV stations repeat stages 1 4.
Press i to remove the menus from the TV screen.
01
C02
00
PR-01
02
C03
C06
00
03
00
PR-02
PR-03
04
C04
00
PR-04
05
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
08
MOVE:
PSET
R
DELETE
:
,
OKi
-
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
04
00
PR-02
PR-03
PR-04
05
C04
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
PR-07
PR-08
MOVE
:
DELETE
:
,
How to
selecting
Stored TV stations:
Stored TV stations can be selected in either of two ways.
Press PROG. 3 or 4 to select different stations that are
tuned into your VCR.
You may also directly select stations using the
numbered buttons on the remote control.
OKi
15
Before
General
This manual
Operation
DVD
-
part
Temporary
Explanation
the basic instructions for
gives
operating
require specific operation or allow
only limited operation during playback. When this
occurs, the symbol
appears on the TV screen,
that
the
indicating
operation is not permitted by this unit
this unit. Some DVDs
is not available
or
The
TV
Some items
On-screen
1
2
3
status
be
or 4
an
highlighted.
the
change
The number buttons
numbers
(e.g.,
title
can
Repeat
All Tracks
AB
Repeat
A-B
Repeat
Off
Action
setting
of
an
For
(non-PBC
from this
prohibited
Video CDs
or
only)
Video CDs
only)
point
not available
some
press SELECT/ENTER to execute the
Some discs may not
Screen Display.
provide
If no button is pressed
Display disappears.
for 10
all of the below On-
seconds, the On-Screen
item.
be also be used for
number).
play
(non-PBC
Notes
item.
Press 1
2 to
ALL
Resume
The selected item will be
or
Repeat Chapter
be
during playback.
to select
Title
Track
displayed on the
changed on the menu.
can
display operation
Press DISPLAY
Press 3
can
Repeat
Repeat
OFF
Display
general playback
screen.
CHAPT
TRACK
the disc.
on
On-Screen
TITLE
Feedback Field Icons
setting
functions,
setting.
DVD
Items
Title Number
1/3
Chapter
Number
1 /12
Time search
Audio
language
Digital Audio
Output mode
language
Angle
5.1 CH
OFF
1/1
Numbers
,
SELECT/ENTER
Numbers
,
SELECT/ENTER
language,
encoding method, and channel number, and
changes the setting.
Shows the current subtitles
changes the setting.
angle number and total number
angles, and changes the angle number.
Shows the current sound
changes the setting.
1/2,or
AUDIO
1/2,or
language, and
Shows the current
1/2,or
SUBTITLE
of
1/2,or
ANGLE
mode, and
1/2
VCD1.1
Items
Track Number
1/4
Time
Audio Channel
16
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Shows the current audio soundtrack
NORM.
Sound
1/2,or
Numbers, SELECT/ENTER
1 ENG
Sound
VCD2.0
Shows the current title number and total number of
to the desired title number.
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
D
ABC
titles, and skips
0:20:09
and
Subtitle
Selection Method
Function (Press 3/4 to select desired item)
Function (Press 3/4 to select desired item)
Selection Method
Shows the current track number, total number of tracks
and PBC On mode, and skip to the desired track number.
1 /2,or
Numeric, SELECT/ENTER
0:20:09
Shows the
elapsed playing time (Display only)
STER.
Shows the audio channel, and
changes the audio channel.
NORM.
Shows the current sound
changes the setting.
mode, and
--
1
/2,or
AUDIO
1/2
Before
Initial
You
DVD
-
part
Menu
Settings
set your
can
Initial
1
Operation
Personal Preferences
own
on
this unit.
Select
you
General
Settings
Language
a
see
for the
language
Operation
Press SETUP.
The setup menu appears.
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
Country
Disc Subtitle
English
Disc Menu
French
Rating
German
PREATION
Italian
Code
Language
Audio
Digital
Output
Spanish
Code
Italian
Aspect
Menu
menu
Others
Country
TV
This is the
Aspect
Menu
Original
menu.
Disc Audio
TV
Disc Audio
setup
when you press SETUP.
Chinese
Language
Polish
Digital
Audio
Output
Hungarian
Other--------
Picture
Others
TV
2
Press 3/4 to select the desired item.
The screen will show the current setting for the
selected item, as well as alternate setting(s).
While the desired item is
3/4 to select the desired
3
Press SELECT/ENTER
4 selection.
Some items
require
5 setup
setting.
to confirm your
additional
RETURN
Press SETUP,
selected, press 2, then
or
steps.
PLAY to exit the
Select
Language
language
a
DVD
4:3 Letterbox: Select when
nected.
Displays
above and below the
4:3 Panscan: Select when
a
with
masking
con-
bars
conventional TV set is
connected. The video material formatted in the Pan &
Scan
style
picture are
is
played
off).
back in that
style (Both
sides of the
cut
16:9 Wide: Select when
a
16:9 wide TV is connected.
Disc Audio
4:3 Letterbox
Disc Subtitle
4:3 Panscan
Disc Menu
16:9 Wide
Rating
DVD
Country
for the disc's
Menu, Audio, and
original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 35. If you enter the wrong language
:
standard 4:3 TV is
images
picture.
TV
The
Code
Aspect
Menu
Subtitle.
Original
a
theatrical
menu.
Language
Disc
Aspect
Language
Digital
Audio
Output
Others
code, press CLEAR.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Code
Italian
Aspect
Menu
Spanish
Language
Chinese
Polish
Digital
Audio
Output
Hungarian
Other--------
Others
17
Before
Operation
DVD
-
part
Sound
Digital
Others
Audio
Output
Each DVD disc has
Set the
The
of audio
variety
output options.
player's Digital Audio Output according to the
a
type of audio system you
DRC, Vocal, PBC and Auto Play settings
Press 3/4 to select the desired item and press
setting of the selected item is
SELECT/ENTER. The
use.
changed
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
between On and Off.
if you connected this unit's DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equipment with
a
or
a
DTS
Vocal On
Disc Subtitle
PBC On
Disc Menu
Auto
Dolby Digital decoder).
with
DRC On
Disc Audio
Play
Off
Rating
Country
Stream/PCM: Select "Stream/PCM" if you connected
this unit's DIGITAL OUT jack to an amplifier or other
equipment
be
can
changed.
TV
Aspect
Menu
decoder, Dolby Digital decoder
Code
Language
Digital
Audio
Output
MPEG decoder.
PCM: select when connected to
stereo
amplifier.
This unit
a
outputs
2-channel
Others
digital
sounds in the PCM
2ch format when you play a DVD video disc recorded
on the Dolby Digital, MPEG1, or MPEG2 recording sys-
Dynamic Range Control (DRC)
tem.
With the DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
Disc Audio
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
PCM
/PCM
Rating
Country
TV
Code
Aspect
Menu
Digital
Audio
Sample Freq.
48 KHz
Language
96KHz
Output
thanks to
possible,
audio
digital
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
at
a
quietest ones). Then, you may
losing clarity
lower volume without
listen to
a
movie
of sound. Set
DRC to On for this effect.
Others
Vocal
Sample Frequency
Set Vocal to On
To
only
DVD is
The karaoke channels
Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
change
the
playing.
mix into
a
when
a
multi-channel karaoke
on
the disc will
normal stereo sound.
PBC
Set
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On
or
Off.
played according to the PBC.
played the same way as Audio
CDs.
Auto
You
Play
can
ically
set up the DVD
starts
If Auto
Play
search
a
play
DVD
playing
mode is set to
title that
back the title
On: Auto
Off: Auto
Player
Play
Play
so a
DVD disc automat-
whenever the DVD is inserted.
On, this DVD player will
playback time
automatically.
is
long
most and then
function is activated.
function is not activated.
Note
The Auto
18
Play
function may not work for
some
DVDs.
Before
Operation
DVD
-
part
Parental Control
Rating
Movies
DVDs may contain
on
scenes
not suitable for
Therefore, discs may contain Parental Control
information that
certain
DVD
Enter the code of
DVD
children.
Code
Country
applies
to the
complete
the disc. These
scenes on
disc
or
scenes are
whose standards
country/area
Code
(See "Country
disc, referring
were
to the list
List", page 36.).
to
IR
Disc Subtitle
are
PREATION
Code Set
Disc Audio
rated
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
country-dependent.
a
used to rate the DVD video
Disc Menu
Rating
Country
The Parental Control feature allows
TV
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Code
Aspect
Menu
Language
Digital
Audio
Output
Others
Disc Audio
8
Disc Subtitle
7
Disc Menu
6
Rating
TV
Code
1
Audio
Digital
Output
Unlock
Change
Others
1
Select
2
While
3
When you have not entered a password yet.
Enter a 4-digit password using the numbered but-
3
and
on
the
Setup
menu
using
the
buttons.
4
"Rating"
tons to create
a
2
3
4
5
6
While
using
the 3/4 buttons
on
menu.
is selected, press 2.
Code is selected, press 2.
Country
Follow
step 3 of "Rating"
Select the first character
Shift the
cursor
on
left.
using
the 3/4 buttons.
1/2 buttons and select
using
the second character
using
3/4 buttons.
Press SELECT/ENTER to confirm your country
code selection, then press SETUP to exit the
menu.
personal 4-digit security password,
then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify.
When you have already entered a password;
the code is
Enter
below
a
Code
Country
the setup
3
2
Language
"Rating"
Select
4
Aspect
Menu
1
5
Country
4-digit password using the numbered butpersonal 4-digit security pass-
Note
Confirmation of the
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
).
tons to confirm the
4
word, then press SELECT/ENTER.
Changing
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
1
Follow
2
Enter the old
3
Select
Select
a
rating from 1
(1) has the
tons. One
to 8
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
Ratings
er, all disc
be played.
scenes
with the
Higher
rated
unless
alternative
an
one.
If
no
a
rating for the playrating or lower will
will not be played
scenes
scene
is available
same
on
rating
the disc.
or a
suitable alternative is found,
play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
Press SELECT/ENTER to confirm your
5 selection, then press
1-2
as
code
shown above to the left
(Rating).
code, then press SELECT/ENTER.
Change using
the 3/4 buttons then press
Enter the
new
4-digit code,
then press
SELECT/ENTER.
5
Enter
exactly the same code a second
fy by pressing SELECT/ENTER.
6
Press SETUP to exit the
time and veri-
menu.
same
The alternative must have the
lower
4
1 to 8: Some discs contain scenes not
suitable for children. If you set
Steps
4-digit
SELECT/ENTER.
least
has the most
Eight (8)
using the 3/4 butplayback restrictions.
playback restrictions.
the
SETUP to exit the
If you
If you
forget
your
password,
code
to clear the current pass-
word, follow the procedure below.
1
Press SETUP to
2
Use the Number buttons to enter the
display
the
setup
menu.
6-digit
number
"210499".
rating
menu.
forget your 4-digit
The
3
4-digit password
Enter
a new
code
is cleared.
as
shown above to the left
(Rating).
19
with
Operation
Playing
You will
a
only
tape
playback, Shuttle :
back or still picture press F or G.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
Slow motion
tape
5 During playing
be able to load and
eject
video cassettes
when your VCR is plugged into the mains.
Your VCR may also playback recordings from NTSC
To switch off the slow motion and
tapes (on PAL TV).
better
Getting
a
When
cassette is inserted and
a
picture
tracking
possible picture automatically. If the quality of the
recording is poor, repeatedly press 3 or 4 on the
remote control to manually adjust the tracking until
any distortions have been removed. Press numbered
0 on the remote control to switch automatic tracking
back
on
appear
1
that you have correctly connected your
described earlier in this book.
VCR
as
Turn
on
If distortions
can
or
If the end of the
facing
playback.
tape is reached, your VCR will stop
the tape.
playback.
tape is playing press CM SKIP
control to
away from you.
reduce
(Commercial Message) Skip:
material).
Repeatedly
arrow
picture,
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
The video cassette should have the window side
up and the
in the
seen
playback automatically, rewind, stop, eject
While
facing
be
Press EJECT.
your VCR.
Insert the video cassette into your VCR.
on
to the status of
E.
Press STOP to end
normal
your TV.
Press POWER to turn
shuttle, the noise bars may
picture according
them with D
6
CM
sure
the
on
tape.
again.
Make
slow motion and
During
playback started, the
function works to get the best
automatic
shuttle, press the
desired function.
commercial
skip
on
the remote
another programme
(or
press CM SKIP to
skip:
1 Press 30 seconds
2 Press 60 seconds
2
Press PLAY to start
playing
your tape.
video cassette which has had its
If you load a
record protection tab
cassette will start
3 Press 90 seconds
4 Press 120 seconds
removed, playback of the
5 Press 150 seconds
automatically.
6 Press 180 seconds
AUTO TRACKING
Your VCR will
give
3
the best
automatically adjust
picture quality.
Press PAUSE/STEP to still
Press PAUSE/STEP
the
tracking
to
picture.
repeatedly to advance
down at about 1/19 times the normal
be
the
1
Press i.
2
Press 1
3
Press OK.
.
picture quality
pressing 3 or 4.
can
be
Press PLAY to continue
4 Picture search:
improved slightly by
playing
or
2 to select OPR.
your tape.
back press either FORWARD or
BACKWARD and this will enable you to rapidly
wind the tape (7 times normal playback) and see
During playing
where you
are on
the
FORWARD
played
or
rewinding press and hold
picture will be
normal playback speed.
ON
OFF
4
or
3
or 4
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
OPR
i
OPR
repeatedly
to select:
OFF, SOFT
SHARP.
playing
5
20
Press
12
12
MS
Please note you may
BACKWARD the
back at 7 times
OFF
SOFT
SHARP
R
f
tape.
Logic search:
During fast forwarding
Response)
tape.
playback.
paused
Still
Picture
automatically improves playback picture
quality by adjusting your VCR to the condition of the
for up to 5 minutes. After 5
minutes your VCR will stop the tape to prevent
damaging the tape or your VCR
can
(Optimum
This feature
a
tape frame by frame.
If you press FORWARD, the picture will be slowed
Tapes
OPR
a
only
tape.
Press i return to
screen.
set OPR when
or
Operation
with
Instant Timer
tape
Recording (ITR)
Your VCR allows you to make
variety of simple methods:
5
recordings using
a
video cassette
Your VCR
out.
runs
record up to 180 minutes using Standard Play (SP);
using LP you will be able to record up to 360 minutes.
Please note there will be
sound
1
quality
Make
VCR
when
using
picture
and
LP.
that you have correctly connected your
described earlier in this book.
Insert
on
your VCR.
video cassette with
a
Long Play
or
and sound
much
quality,
recording
SP.
recording.
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
7
Press PAUSE/STEP to avoid
recording
unwanted
scenes.
Press PAUSE/STEP to continue
recording.
paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5
minutes your VCR will stop recording to prevent
damaging the tape or your VCR.
Tapes
sure
as
Press POWER to turn
2
loss in
slight
a
as
Press REC/ITR to start
6
which
incorporates Long Play (LP)
enables you to record up to twice the amount of
time on a video cassette. For example an E-180 will
Play.
SP will produce improved picture
however LP will provide twice as
time
Instant Timer
Recording (ITR) start recording
for
a set period of time or until the
immediately
Press LP if you wish to record in
Standard
can
be
Press STOP twice within 5 seconds to end
8 recording.
Press EJECT.
protection
EJECT will appear
tab into your
on
the TV
screen
for
a
few
seconds.
VCR.
The video cassette should have the window side
facing
up and the
arrow
away from you.
facing
Notes
If you do not wish to record
3
Press
3
or 4
to select the programme number
you wish to record.
You may also directly select programme number
using the numbered buttons on the remote control.
If
directly from the AUDIO L/R
AV1)/
(VCR IN AV1) or AUDIO 2
VIDEO
2
terminals
(L/R)/
repeatedly press AV until
the socket you wish to record from is displayed.
you
4 (VCR
wish to record
IN
VIDEO
AV 1 for
L/R
VIDEO
recording from AUDIO
(VCR IN AV1) terminals
on
(VCR
the
IN
rear
AV1)/
on a tape (this can
happen quite easily by accident!) remove the
protection tab on the back edge of the video cassette.
It is possible to record on a video cassette with the
record protection tab removed by covering the hole
with self adhesive
tape.
Remember you can record one programme while
watching another by starting your instant recording,
press TV/VCR to appear TV indicator in the
display window and then selecting a different channel
on
your TV.
of your
unit.
AV 2 for
terminals
recording
on
from AUDIO 2
(L/R)/
VIDEO 2
the front of your unit.
21
OPERATION
with
Operation
tape
recording using On Screen
Display
Timer
6
You may set up to seven timer record events within
one month of the current date.
Press the numbered buttons to enter the recording
start and end times of the programme that you wish
to record.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
You may also select the the start and end times by
pressing
Note
or 4.
3
Before setting the timer make sure that you have set
the VCR clock correctly and you know which stations
you have tuned TV stations on your VCR.
1
Insert a video cassette with protection tab into your
VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
2
Press i.
Press 1 or 2 to select REC.
Press OK.
REC
P
SET
R
Pr-12
ACMS
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
fOSD
ON
OFF
3
DATE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
SP
SP
--
--
--
--
--
--
--
--
--
--
--
--
--
--
DELETE:
,
DATE
PR
SP
PR-01
SP
OK i
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
--
-~
-~
-~
-~
-~
SP
--
::
--
SP
--
::
--
SP
--
::
--
SP
--
::
--
SP
--
::
--
SP
--
::
-~
SP
--
-~
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
speed
DATE
TIME
16
1900
::
2000
SP
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
i
Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1
9, press 0 first, then the
channel number; for example Stations 3 03. You
may also select Channels by pressing 3 or 4.
Once selected press 2.
If you wish to record from AUDIO L/R (VCR IN AV1)/
VIDEO (VCR IN AV1) or AUDIO 2 (L/R)/ VIDEO 2
from the back or on the front of your unit, press AV to
select for correct display (AV1 or AV2).
-
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
i
8
TIME
--
--
--
::
LP).
SP
Press 1 to delete the event.
--
SP
~
--
SP
replace.
4
or
Press OK to start setting the timer record event.
If all timer record events are full press 3 or 4 to
select the event that you wish to remove and
PR
SP
::
--
REC
OKi
OPR
--
::
19002000
::
--
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program.
TIME
--
TIME
16
Press 2 to select the recording speed.
Press 3 or 4 to select the desired tape
(SP, IP,
--
DATE
--
i
7
PR
12
PR
PR-01
9
Check that the timer event details are correct.
Press i twice.
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your VCR Standby.
will appear in the display window while your
VCR waits to make the recording. To watch a DVD
during timer recording standby mode, press
POWER and DVD to switch to DVD mode.
Press POWER twice within 5 seconds to end
recording.
-
PR
PR-01
DATE
change.
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
Press 1 to delete the event...or
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3 or
4 to enter the correct information.
SP
SP
SP
SP
SP
SP
i
5
Press the numbered buttons to enter the date of
the programme.
If you press OK before entering the date you may
select one of the following automated recording
features. Press 1 or 2 to select, then press OK to
confirm.
DLY To record every day (except Saturday and
Sunday) at the same time.
SU
SA To record at the same time every week.
~
PR
DATE
TIME
--
PR-0116---
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
::
SP
DLYSUMOTUWETHFRSA
--
--
--
--
-~
--
OK i
22
Notes
If at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press 3
or 4 to select the event that you wish to delete or
If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme
will always be given priority.
Example:
Programme
1 is
programmed
to start at 16:00 and end
Programme
2 is
programmed
to start at 16:30 and end
at 17:00.
at 17:30.
(In
but
this case, Programme 1 will be recorded in its entirety,
only the last 30 minutes of Programme 2 will be
recorded.)
Operation
Playing
a
with DVD and Video CD
Playback Setup
Turn
on
1
Note
VCD1.1
input
source con-
player.
system: Turn
and select the
DVD
VCD2.0
DVD
the TV and select the video
nected to the DVD
Audio
General Features
DVD and Video CD
the audio
on
input
source
otherwise, all operations
described
the remote control. Some
system
Moving
When
2 facing
up.
double-sided DVD is inserted, make
the side you want to play is facing down.
a
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and
automatically.
If
playback
press PLAY.
In some cases, the disc
The
a menu screen
is
or
playback
loading
a
DVD
you want to
3
4
buttons to select the
title/chapter
view, then press SELECT/ENTER
to start
playback.
Press TITLE
or
DVD
DISC MENU to return to the
a
than
more
menu.
DVD
one
title, you
to
can move
follows:
as
(0-9)
to select
a
num-
title number.
to another CHAPTER/TRACK
title
on a
more
1/3
1 /12
VCD1.1
disc has
displayed
may be displayed first after
Video CD which contains a menu.
Use the 1 2
Setup
DISPLAY, then press the appropriate
Moving
appear
menu screen
DVD
disc has
Press
does not start,
might
a
another title
When
menu
to another TITLE
bered button
sure
instead.
If
the
1/3
Press OPEN/CLOSE to open the disc tray.
starts
on
connected to the
player.
When
use
features may also be available
Load your chosen disc in the tray, with the label
3
Unless stated
disc has
than
chapter/track
as
Press .
or
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
>
briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
menu
screen.
Note
For
VCD2.0
Use the number buttons to select the track you want
two-digit numbers, press
(0-9) in rapid succession.
the numbered buttons
to view.
Press RETURN to return to the
Menu
setting
menu screen.
and the exact
operating procedures for
depending on the disc.
the menu may differ
Follow the instructions on the each
using
You also may set PBC to Off under
18.
menu screen.
setup. See page
Rating settings (not authorized),
"Parental
--
Control",
DVDs may have a
player will not
Your
different from your
player is 2 (two).
--
The
player
or
>
during
VCD1.1
pause.
will enter SLOW mode.
2 Use the .
or
> to select the
t
required speed:
or
T
1/16,
If Parental Control is set and the disc is not within the
the
4-digit
code must
be entered and/or the disc must be authorized
--
1 Press .
VCD2.0
DVD
1/16, t 1/8, t 1/4 or t 1/2 (backward),
T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
Notes
--
Slow Motion
To watch
a
DVD
(see
Note
Slow motion
playback
in
reverse
is not
applicable
for
Video CD.
page 19).
region code.
on
play discs that have a region code
player. The region code for this
during
timer
recording standby
mode, press POWER and DVD
to switch to DVD
mode.
23
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
The
1 To
Frame-by-frame playback
VCD1.1
will now go into PAUSE mode.
advance the picture frame-by-frame
PAUSE/STEP
pressing
The
repeatedly
on
Track icon appears
Repeat
on
the TV
screen.
repeat the disc currently playing, press REPEAT
a
second time.
during playback.
The
player
can
Track/All/Off
Repeat
-
repeat the track currently playing, press REPEAT.
2 To
1 Press PAUSE/STEP
2 You
Video CDs
(continued)
by
the remote
All icon appears
Repeat
3 To exit
The
the TV
on
screen.
Repeat mode, press REPEAT
Off icon appears
Repeat
the TV
on
a
third time.
screen.
control.
Note
Search
VCD2.0
DVD
1 Press and hold .
On
VCD1.1
setup
> for about two seconds
or
during playback.
The
player
will
go into SEARCH mode.
now
or > repeatedly to select the
required speed: mX2, mX4, mX16, mX100
(backward) or MX2, MX4, MX16, MX100
(forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
mode, press PLAY.
use
A-B
A*
AB
To
repeat
a
PBC, you
the
2 Press A-B
VCD1.1
OFF
sequence in
briefly
a
title:
the TV
on
starting point.
screen.
at your chosen end point.
the TV screen, and the repeat sequence
repeat appears on the player 's display).
again
A B appears
begins (a-b
the
on
function. See page 18.
VCD2.0
DVD
1 Press A-B at your chosen
A* appears
must set PBC to Off
Repeat
briefly
on
3 To cancel the sequence, press A-B.
Random
VCD2.0
Karaoke DVD
VCD1.1
1 Press RANDOM
The unit
to
menu
Repeat
2 Press and hold .
3 To exit SEARCH
Video CD with
a
during playback or in stop mode.
automatically begins Random Playback and
"RANDOM" appears
2 To return to normal
on
the TV
screen.
press RANDOM until
the TV screen.
playback,
"NORMAL" appears
on
Time Search
0:20:09
DVD
The Time Search function allows you to start
any chosen time on the disc.
1 Press DISPLAY
play
appears
on
>
selects another
during Random playback, the unit
title (track) and resumes Random play-
the
playing
on-screen
at
dis-
screen.
elapsed playing
time of the
current disc.
2 Within 10
seconds, press 3/4
Search icon in the
back.
The
during playback.
The Time Search box shows the
Tips
By pressing
-:--:--
to select the Time
display.
on-screen
The "-:--:--" appears in the Time Search box.
Notes
3 Within 10
This function
works with DVD Karaoke discs and
only
OnaVideoCDwithPBC,youmustsetPBCtoOffon
setup
menu
to
use
seconds,
required
the Random function. See
the number buttons to enter
right
hours, minutes, and
sec-
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
4 Within 10
page 18.
use
start time. Enter
onds from left to
video CD without PBC.
the
the
seconds, press SELECT/ENTER
to confirm
the start time.
Repeat
CHAPT
DVD
VCD1.1
Playback
an
TITLE
DVD Video Discs
1 To
VCD2.0
TRACK
ALL
This unit
repeat the currently playing chapter, press
2 To
Repeat Chapter
repeat
the title
icon appears
on
the TV
currently playing,
screen.
press REPEAT
Repeat
3 To exit
The
24
Title icon appears
Repeat mode,
Repeat
on
the TV
screen.
press REPEAT
Off icon appears
on
the TV
a
can
DVD
the disc. If you enter
current
produce
a
third time.
VCD2.0
a
VCD1.1
point.
3D Surround
effect, which
playback
conventional stereo
instead of the five
more
speakers,
speakers normally required
1 Press DISPLAY
a
3D SUR
NORM.
simulates multi-channel audio
channel audio from
second time.
The
on
time, playback will continue from the
3D Surround
REPEAT.
The
starts from the selected time
OFF
Repeat Chapter/Title/Off
-
invalid
from two
or
to listen to multi-
home theater
system.
during playback.
2 Press 3/4 to select "NORM."
or
"3D SUR".
screen.
3 Press 1/2
selected.
repeatedly
until the desired sound is
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
VCD1.1
during playback
or
still
playback
discs: Menus
to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the
increases up to six times.
2 Use the 1 2
zoomed
3 4
move
the
through
normal
resume
playback
or
DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select an
option. Or, use the 1/2/3/4 buttons to highlight your
selection, then press SELECT/ENTER.
picture.
3 Press CLEAR to
the
buttons to
level
magnification
return to
paused image.
DVD
Title Menu
1 Press TITLE.
If the current title has
screen.
Note
The
zoom
The
zoom
function may not work for
function may not work on
some
DVDs.
2 The
3 To
DVD
VCD2.0
menu, the
list
menu can
menu
menu
will appear
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
the
on
may appear.
again.
VCD1.1
DVD
Disc Menu
MARKER SEARCH
1/9
a
Otherwise, the disc
and subtitle
multi-angle
scenes.
Marker Search
DVD
the contents of DVD Video
Checking
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
(continued)
1 Press DISC MENU.
You
can
nine
points
To enter
1
start
playback
from
memorized
a
point. Up
to
be memorized.
can
mark, follow these steps.
a
The disc
2 To
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
memorize.
The Marker icon will appear
2
Repeat step
on
the TV
1 to enter up to nine Marker
points
1
a
on a
Marked Scene
disc
During
playback,
The MARKER SEARCH
menu
will appear
on
a
the
screen.
Marker
1
During
playback,
2
angle
appears
on
the
display.
the Audio
Language
DVD
1 ENG
repeatedly during playback
language or audio track.
to hear
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(STER., LEFT or RIGHT).
VCD2.0
a
dif-
VCD1.1
a
dif-
press SEARCH.
menu
will appear
on
the
screen.
Subtitles
DVD
ABC
1 ENG
Press SUBTITLE
erase.
different subtitle
Press CLEAR.
repeatedly during playback
languages.
to
see
the
The Marker number will be erased from the list.
4
Repeat steps
2 and 3 to
erase
additional Marker
Note
numbers.
If
5
To
remove
a
ferent audio channel
Press 1/2 to select the Marker number that you want
to
3
Changing
ferent audio
scene.
Marked Scene
disc
camera
camera
D
the MARKER SEARCH menu, press
The MARKER SEARCH
different
Press AUDIO
will start from the Marked
a
recorded at different
a
5.1 CH
SEARCH.
To clear
to
1/1
angles, you
change
angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
num-
3 Press SELECT/ENTER.
remove
scenes
The number of the current
seconds, press 1/2 to select
ber that you want to recall.
4 To
DVD
again.
press SEARCH.
2 Within 10
Playback
Angle
can
disc.
To Recall
displayed.
the disc menu, press DISC MENU
If the disc contains
briefly.
screen
is
menu
remove
the MARKER SEARCH menu, press
appears, the feature is not available
on
the disc.
SEARCH.
25
OPERATION
with Audio CD and MP3/WMA Disc
Operation
Playing an Audio CD and
MP3
CD
The DVD
ings
Player
can
play
or
read the notes
files that have
on
The
on
the TV
on
screen.
player
About
the TV
go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
screen
Go to
step
2
menu
choice
appears on the TV screen.
to the MP3/WMA-JPEG
1.
menu.
2.
3.
4.
Program
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Clear All
5.
OFF
00:00
as
Microsoft audio
Media
3
4
Press 3/4 to select
SELECT/ENTER.
Playback starts.
During playback,
track then press PLAY
A
Creator", which
single
creates
session disc
track, it
to
6.
cannot
playback
File
elapsed playing
menu.
no
MP3/WMA
ISO9660 file
an
requires
is
system.
MP3/WMA files in the
MP3/WMA file in the 1st
playback
MP3/WMA files. If you wish
files, format all the data in
should be named
incorporate ".mp3"
e.g. "********.MP3"
the current track's
player
or use a new one.
names
and must
time will appear on the display window and
Playback will stop at the end of the disc.
Press TITLE to
or
with this
compatibility
follows:
-
the disc
a
offers double the audio
the MP3 format.
first track. If there is
Press 3/4 to select a folder, and SELECT/ENTER.
A list of files in the folder appears.
Audio)
compression
Sampling Frequency / only at 44.1kHz (MP3),
(WMA)
Bit rate / within 32 320kbps (MP3),
32-128 kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "EasyCD
Folder7
Folder8
file
a
22.5-44.1 kHz
move
MP3 WMA
a
MP3/WMA Disc
Press 3/4 to select the MP3/WMA then press
SELECT/ENTER.
MP3 file that has
an
".mp3".
WMA(Window Media Audio)
limited
Press RETURN to
not read
technology.
WMA(Windows
compression of
JPEG
The MP3/WMA
can
An WMA file is
MP3 WMA
2
Recordings
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
extension other than
Insert a disc and close the tray.
Audio CD; Audio CD menu appears
appears
MP3/WMA
MPEG1 audio
CD-RW discs.
playing MP3/WMA recordings,
MP3/WMA Recordings on right.
menu
on
An MP3 file is audio data
MP3/WMA formatted record-
Before
1
Notes
About MP3
WMA
CD-ROM, CD-R
on
MP3/WMA Disc
or
using
or
8 letters
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
to the next page.
move
Press DISC MENU to
move
to the
previous
page.
This DVD
player requires discs/recordings
to meet
certain technical standards in order to achieve
Program
CD
Program
MP3 WMA
playback quality.
TRACK01
TRACK02
TRACK 1.mp3
TRACK03
TRACK 2.mp3
TRACK04
TRACK 3.mp3
set to these standards. There
TRACK 6.mp3
TRACK07
TRACK 7.mp3
Clear All
TRACK08
STER.
NORM.
Audio CD
menu
0: 56: 18
Clear All
TRACK 8.mp3
00:00
1
If you
are
in
return to the
5
a
MP3/WMA
Customers should also note that
menu
file list and want to return to the Folder
the 34 to
To
26
highlight
previous menu
stop playback
required
permission
list,
screen.
time, press STOP.
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
grant such permission. Permission should
to
and press SELECT/ENTER to
at any other
many different types
OFF
Tip
use
optimal
automatically
(including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
TRACK 5.mp3
TRACK06
are
are
of recordable disc formats
TRACK 4.mp3
TRACK05
Pre-recorded DVDs
always
be
sought
from the
copyright
owner.
right
Operation
Pause
with Audio and MP3/WMA Disc
MP3
CD
1 Press PAUSE/STEP
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
or
To
1
press
repeat
to another Track
MP3
CD
WMA
Press .
or
or
>
briefly during playback to go to the
beginning of the current
to return to the
track.
Press . twice
to
briefly
step back
to the
previous
In
of audio
case
CD,
directly to any track, enter
the numbered buttons (0-9)
during playback.
Repeat
icon and "A
again
"
appears
Repeat Track/All/Off
1 To
MP3
begins
Repeat
to
play repeatedly.
icon and "OFF" appears
3D Surround
This unit
more
icon and "TRACK" appears
Repeat
the
on
can
repeat all tracks
on a
menu
disc, press REPEAT
produce
icon and "ALL" appears
Repeat
3 To cancel
The
Repeat mode,
Repeat
on
the
a
3D Surround
multi-channel audio from
3 Press 3/4
selected.
on
the
third time.
a
menu screen.
press
menu screen.
effect, which
playback
or
a
from two
home theater
AUDIO
repeatedly
five
or
system.
during playback.
2 Press 1/2 to select "NORM."
a
menu screen.
press REPEAT
icon and "OFF" appears
the
speakers, instead of the
speakers normally required to listen to
1 Press DISPLAY
second time.
The
on
play,
CD
screen.
2 To
menu screen.
conventional stereo
WMA
repeat the track currently playing, press REPEAT.
The
the
at your chosen end point.
on the menu screen,
simulates multi-channel audio
CD
on
icon and "A B" appears
and the sequence
The
to go
using
Repeat
press A-B at your chosen start*
3 To exit the sequence and return to normal
A-B again.
track.
the track number
sequence.
2 Press A-B
The
next track
a
CD
During disc playback,
ing point.
The
Moving
A-B
or
"3D SUR".
until the desired sound is
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear a
(STER., LEFT, or RIGHT).
CD
different audio channel
Search
MP3
CD
1 Press and hold .
or
WMA
> for about two seconds
during playback.
The
player
will
now
go into SEARCH mode.
2 Press and hold .
or > repeatedly to select the
required speed: mX2, mX4, mX8 (backward) or
MX2, MX4, MX8 (forward).
Search
speed
and direction
are
indicated
on
the
menu
screen.
3 To exit SEARCH
Random
mode, press PLAY.
MP3
CD
1 Press RANDOM
WMA
during playback
or
when
playback
is
stopped.
The unit
automatically begins
"RAND." appears
on
2 To return to normal
repeatedly
until
the
Random
Playback
and
menu screen.
playback, press RANDOM
disappears on the menu
"RAND."
screen.
27
OPERATION
with JPEG Disc
Operation
Viewing
JPEG disc
a
JPEG
This DVD
Player can play discs with JPEG files and
Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
1
Insert
TV
menu
to another File
Press .
or
>
once
advance to the next file
1 Press PAUSE/STEP
appears
on
during viewing a picture
to the previous file.
to
or
Still Picture
disc and close the tray.
a
The MP3/WMA-JPEG choice
Moving
the
screen.
The
will
during
slide show.
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
player
now
MP3 WMA
To
JPEG
2
the
flip
picture
Press 3/4 during showing a picture
picture horizontally or a vertically.
Press 3/4 to select the JPEG then press
to
flip
the
SELECT/ENTER.
The JPEG
menu
appears
on
the TV
To rotate
screen.
Press 1/2
JPEG
Folder2
during showing
clockwise
picture
Folder1
picture
or
a
picture
to rotate the
counter clockwise.
Folder3
Folder4
Folder5
Notes
Folder6
Folder7
on
JPEG
Recordings
Folder8
Slide
Depending
Off
Speed
upon the size and number of the JPEG
a long time for the DVD player to
files, it could take
Press 3/4 to select
and SELECT/ENTER.
3 A list of files in the folderfolder,
appears.
Press RETURN to
choice
a
move
to the MP3/WMA-JPEG
menu.
If you
"
are
in
a
file list and want to return to the Folder
the 34 buttons
on
the remote to
---
reduce the resolution of the JPEG files
pixels
and burn another disc.
on
If you want to view a particular file, press 3/4 to
highlight a file and press SELECT/ENTER or
PLAY.
that all the selected files have the
Viewing the file proceeding starts.
During viewing a file, press RETURN
the previous menu (JPEG menu).
rename
move
Press DISC MENU to
JPEG
to
move
to
to the next page.
move to the previous page.
Folder1
Picture1.jpg
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
5/32
1024X768
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
Tip
There
are
three
viewing
Slide
Speed options: Fast,
to highlight the Slide
select the option you want to
Normal, Slow, and Off. Press 1/2
Speed
then press 3/4 to
use, and press SELECT/ENTER.
To
stop viewing
The JPEG
28
menu
the disc should
be less than 650.
When you are using software such as
Creator" to burn the jpeg files into the
menu screen.
Press TITLE to
5
big
Some disc may be incompatible due to different
recording format or condition of disc.
highlight
and press SELECT/ENTER to return to the
previous
4
too
Total number of files and folders
use
"
are
to less than 2 mega
Tip
list,
read the disc's contents. If you don't see an ondisplay after several minutes, some of the files
screen
at any other
appears.
time, press STOP.
when
copying
into the CD
"Easy
CD
CD-R,
ensure
".jpg"
extensions
layout.
If the files have
File
them
names
be read
shown
by
as
".jpe" or ".jpeg" extensions, please
as ".jpg" files.
without
".jpg" extension will not be able to
player. Even though the files are
image files in windows explorer.
this DVD
JPEG
Programmed Playback
CD
VCD2.0
with Audio CD
Programmed Playback
function enables you to store your favorite
tracks from any disc in the player memory.
Program
Program
mode to enter the
on
during playback or in
Program Edit mode.
the stop
E
The
with Video CD
Note
On
a
setup
Video CD with
menu
to
PBC, you
the
use
must set PBC to Off
on
the
function. See page 18.
Program
contain 30 tracks.
can
Press PROGRAM
1
WMA
Programmed Playback
and MP3/WMA disc
The
MP3
VCD1.1
mark will appear to the right of the word
the right side of the menu screen.
Program
OPERATION
Insert Video CD and close the tray.
1
2
Press PROGRAM while
The VCD
Program
menu
is
playback
stopped.
will appear.
Program
CD
TRACK01
TRACK02
Note
TRACK03
Press PROGRAM to exit the
Program
Edit
TRACK04
mode;
TRACK05
TRACK06
E
the
mark will
disappear.
TRACK07
Clear All
TRACK08
STER.
0: 56: 18
Select
2 place
track, then press SELECT/ENTER
a
the selected track
the
on
NORM.
to
list.
Program
Note
Repeat step 2
Program list.
3
to
place
E
Program
CD
additional tracks
Program
MP3 WMA
the
TRACK 12
TRACK 2
TRACK 8
TRACK 1.mp3
TRACK 2.mp3
TRACK 3
TRACK 10
TRACK 2.mp3
TRACK 4.mp3
TRACK 4
TRACK 3
TRACK 3.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 7
Clear All
TRACK 8
0: 56: 18
STER.
Audio CD
Clear All
TRACK 8.mp3
NORM.
00:00
To
track you selected last is
highlighted
on
the program list.
5 playing.
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops
played once.
Program
list
have
7
repeat all tracks
REPEAT
playback, press
playback
from
programmed
Program
PROGRAM to exit the
Edit mode; the E mark will disappear and
select a track of CD (or MP3/WMA) list and then
press SELECT/ENTER.
"PROG." indicator
disappears
Tracks
Erasing
a
on
the program
icon and "ALL" appears
Repeat mode,
the
the
menu
list, press
Track from
the
on
menu screen.
on
Program
the
a
third time.
menu screen.
List
1 Press PROGRAM
MP3/WMA disc
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
on
on
press REPEAT
icon and "OFF" appears
Repeat
Program
To resume normal
screen.
second time.
a
Repeat
The
Press PLAY to start.
the
the TV
icon and "TRACK" appears
Repeat
To cancel
6 Playback begins
on
from
repeat the track currently playing, press REPEAT.
The
to the next page.
Press DISC MENU to move to the previous page.
move
after all of the tracks
left.
on
screen.
To
Press 3/4 to select the track you want to start
Press TITLE to
on
Repeat Programmed
menu
The
programmed
menu.
steps 2-6 of "Programmed Playback with
Audio CD and MP3/WMA disc"
"NORMAL" appears
Press 2.
The
Program
OFF
3
MP3/WMA
menu
PROGRAM to exit the
playback
4 programmed playback,
press PROGRAM.
TRACK 5.mp3
TRACK 6
Follow
or
To resume normal
TRACK 3.mp3
TRACK 4.mp3
Press RETURN
3
E
TRACK 8.mp3
TRACK 1
TRACK 5
4
on
menu screen.
Erasing
1 Follow
List"
as
the
Program
Complete Program
steps
1-2 of
"Erasing
a
list.
List
Track from
Program
above.
2 Use 3/4 to select "Clear
All", then press
SELECT/ENTER.
The
complete Program
The programs
are
for the disc will be erased.
also cleared when the disc is removed.
29
Additional
On Screen
Operation
VCR part
-
Video Doctor
Display
You may easily
amount of tape
display the current time or tape counter,
left, day, month, year, day of week,
channel,
programme
tape speed and operational mode
of your VCR will appear on the TV screen. If a recording
is taking place these On Screen Displays will not be
recorded onto the
tape.
(Self-Diagnosis)
This feature informs you that there is a problem with
your VCR. These error messages will appear on the TV
screen.
1
Press i.
Press 1
to select Dr.
or 2
Press OK.
1
Press CLK/CNT to
display.
repeatedly
Press CLK/CNT
The
display options.
tape
to
cycle through
the
counter and amount of
tape left will appear if there is
a
tape loaded.
12
REC
After 3 seconds the
2 Displays
will clear
majority of the
leaving only the
counter and the amount of
On Screen
clock
tape left
or
the
on
P
SET
R
Pr-12
ACMS
TIME
DATE
SYSTEM
AB
C
OSD
VCR
VCR
Dr.
Dr.
fOSD
ON
OFF
OKi
OPR
tape
screen.
VCR
Press CLK/CNT
the TV
again
to
all
remove
displays
from
Dr.
VIDEO DOCTOR
HEAD STATUS
screen.
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
OK
Tape Counter Memory Stop
The
Digital Tape
i
be displayed on the display
by pressing CLK/CNT on
Digital Tape Counter indicates
recordings on the tape.
Counter
can
window instead of the time
the remote control. The
the relative
positions
of
2
Press
3 or 4
to check
a
problem.
HEAD STATUS
O
PLEASE CLEAN:
Clean your video heads.
1
Press CLK/CNT.
TAPE STATUS
Press CLEAR to set the counter to 0:00:00.
Press PLAY
The
or
start
counter will
recording.
display the
tape
hours, minutes and seconds.
O
actual
play
NOT RECORDABLE:
Insert
time in
a
tape with its protection tab in place
NO. OF TIMER PROGRAMME
O2
2
Press STOP when
playback
or
is
recording
Shows the number of timer
complete.
Press BACKWARD.
The
NEXT TIMER PROGRAMME
tape will rewind and automatically stop when
O
the counter returns to 0:00:00.
switched off
3
using
1
on
the front of the unit
that your unit
the remote control.
so
can
only
be
can
be
operated
will appear in the display window.
None of the buttons on the front of your unit will
(except
If any buttons
ez
1
).
on
Press i.
(easy) repeat
During play back, press
point where repeat play
display
are
window for
a
few
2
will
Release
REPEAT at the
ez
holding
section is
reverse
search.
point
where
repeat play
replayed
twice
automatically.
to switch off the child lock.
again
disappear in the display
window.
Note
Pressing
ez
REPEAT
return to normal
30
REPEAT at the
is to start.
The
2
ez
pressed
seconds.
Press C.LOCK
& hold
the
is to be concluded.
Then, your VCR will go into
the front of your unit
will flicker in the
recording.
By pressing & holding ez REPEAT during play back,
holding section is replayed twice automatically.
Press C.LOCK.
work
PR-01 26 10:00~11:00SP
Shows the current status of timer
Child Lock
The control buttons
recording.
play.
again during repeat play,
will
Additional
Operation
Hi-Fi Stereo Sound
Your VCR will record and
VCR part
-
System
Hi-Fi stereo sound.
playback
This allows you to record and playback the sound in
several different ways. Video cassettes recorded on
your VCR will have a normal mono audio track and two
VHS Hi-Fi stereo audio tracks. These stereo tracks
allow you to make audio
bilingual mode from a TV
video disc
1
or
in Hi-Fi stereo
recordings
broadcast,
stereo audio
OPERATION
or
system,
another Hi-Fi VCR.
Your VCR allows you to enjoy broadcasts with standard stereo, bilingual and mono sound. The particular
type of sound received
briefly displayed
on
the TV
or
that recorded will be
screen
for
a
couple
of
seconds:
STEREO
Sound is
and
automatically
mono
recorded
tracks of the video
the Hi-Fi stereo
on
tape.
BIL
Both audio channels will be recorded
stereo tracks. The
will be recorded
on
primary language
the
mono
on
the Hi-Fi
channel
(left)
track of the video
tape.
MONO
The sound is recorded
mono
2
3
on
track of the video
Press AUDIO
the Hi-Fi tracks and the
tape without any separation.
repeatedly
until the desired audio
mode appears.
The choice is
In BIL
STEREO, LEFT, RIGHT and MONO.
the primary language is output on
playback
the left channel and the
secondary
channel is out-
put simultaneously from the right channel when
audio output is set to STEREO. The primary language will be output from both channels when the
audio
setting
is MONO.
Please note that when
adjusting
the
tracking
control
Hi-Fi stereo sound may revert to MONO.
31
Additional
Operation
Last Condition
DVD
This
CD
player
-
DVD
part
Memory
VCD1.1
memorizes the
user
settings
for the last disc
that you have viewed. Settings remain in memory even
if you remove the disc from the player or switch off the
player.
If you load
a
disc that has its
settings
memo-
rized, the latest stop position is automatically recalled.
Notes
--
--
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
it.
Screen Saver
The
screen saver
DVD
32
Player
in
picture
appears when you leave the
stop mode for about five minutes.
Special Recording
Copying
from DVD To VCR
This unit allows you to copy the contents of
tape with a press of the COPY button.
Recording
a
DVD to
a
from another video
recorder
VHS
With this video recorder you
an external source, such as
recorder
Note
If the DVD you
to copy is copy
not
be
able
to copy the disc.
you may
protected,
1
2
3 Copy
a
videotape
the DVD to VHS
Press the COPY button
the
into the VCR deck.
B.
used for
will be referred to
1
as
VCR A.
or
REC/ITR button
on
Copy
menu
button
Play
the
to
begin copying.
IN
AV1)/VIDEO (VCR
IN
Insert the recorded
AV1)
(L/R)/
on
the
rear
VIDEO 2
tape into VCR A and
a
on
blank
into VCR B.
3
To start
press the REC/ITR
VCR A.
4
When you want to finish
on both video recorders.
recording,
and PLAY
on
on
VCR B
Process
playing, press STOP
twice within 5 seconds to end the copy.
You must stop the Copy process manually when
the DVD movie
over
(VCR
panel
2 tape
appears, you may need to
manually
VCR A should be connected to the AUDIO L/R
of your unit or AUDIO 2
the front panel of your unit.
Tape
When the DVD is finished
record
following description, this video recorder will be
recording and will be referred to as VCR
The other appliance will be used for playback and
one
panel.
If the DVD disc
4 Stop
camcorder.
Note
The DVD will go into Play mode and the VCR will
go into Record mode.
press the
from
Tape
blank VHS
unit front
recordings
from another video
In the
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
Insert
make
attempting
are
Insert Disc
Insert VHS
or a
can
copying
and
ends,
over
or
the unit may
replay
copying,
press the STOP
Press STOP twice within 5 seconds at this unit.
and
again.
33
OPERATION
Troubleshooting
Check the
following guide
for the
possible
cause
DVD
or
properly.
VCR do not
a
before
problem
DVD
or
Correction
VCR button is not switched
Refer to page 2.
properly.
No power.
The power cord is disconnected.
The power is on, but
the DVD player does
No disc is inserted.
Plug the power
securely.
Insert
signal
the TV
player
equipment
are
not connected
player
playback.
screen.
Turn
Digital Audio Output
position.
The disc is
An
is set to the
The disc is
on
the
equipment
jacks
connected with
the audio cable.
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
Clean the disc.
dirty.
unplayable
jacks
so
Connect the audio cable into the
The power of the equipment connected
with the audio cable is turned off.
The TV channels
not start
the TV
input mode of the
you can listen to the
sound from the DVD player.
audio receiver
securely.
wrong
does
on
Select the correct
connected with the
securely.
The
The DVD
appears
Connect the video cable into the
The audio cables
poor.
appropriate video input mode
the picture from the DVD
so
securely.
The
is
display
securely.
signal output.
picture
that the DVD or,
The video cable is not connected
audio cable is not set to receive DVD
The
(Check
lit.)
Select the
on
output.
No sound.
disc.
window is
The TV is not set to receive DVD
picture.
a
cord into the wall outlet
audio CD indicator in the
not work.
No
service.
contacting
Cause
Symptom
work
of
are
not tuned in
properly.
Insert
tuning,
carry out
tuning again.
playable disc. (Check
type and Regional code.)
disc is inserted.
placed upside
Check
a
Place the disc with the
down.
the disc
playback
side
down.
The disc is not
placed
within the
guide.
Place the disc
inside the
dirty.
The
level is set.
Cancel the
the
The remote control
There is
does not work
remote control and this unit.
properly.
an
the disc
tray correctly
Clean the disc.
The disc is
Rating
on
guide.
obstacle in the
path
of the
The batteries in the remote control
are
rating
Rating
function
or
change
level.
Remove the obstacle.
Replace
the batteries with
new ones.
exhausted.
Video
tape
cannot be
Is the cassette
compartment empty?
Eject
the
tape in.
inserted.
No Hi-Fi sound
Audio mode is not set
properly.
Select "STEREO"
"AUDIO"
on
by repeatedly pressing
the remote control.
Video Head Cleaning
Dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken
up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes
might. Clean the video heads with a commercially available video heads cleaning tape.
34
Language Code
Enter the
(See
appropriate
17).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
35
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
19).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
Coast
IN
India
NU
Niue
IO
British Indian Ocean
NZ
New Zealand
US
United States
Uruguay
Kingdom
Outlying
CI
Ivory
CK
Cook Islands
CL
Chile
Territory
OM
Oman
UY
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Verde
Anguilla
Islands
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
36
Republic
Islands
(French)
State
(British)
(USA)
Specification
General
Power
requirements
AC
Power
consumption
23W
Dimensions
Mass
110-240V, 50/60 Hz
430 X 85 X 293
(approx.)
4.8
(approx.)
mm
(w/h/d)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
display tape
RF Modulator
UHF 22
68
-
(41˚F
to
REF NC
95˚F)
(Adjustable)
System
Laser
Semiconductor
Video Head
Double azimuth 4
system
laser, wavelength
heads,
helical
650
scanning.
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Inputs (VCR)
Audio
-6.0dBm,
more
Video
1.0
75
Vp-p,
than 47 kohms
ohms, unbalanced
Outputs (DVD)
VIDEO OUT
1
S-VIDEO OUT
(Y) 1.0 Vp-p 75 ohms, negative sync., Mini Din 4-pin
(C) 0.3 Vp-p 75 ohms
(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
COMPONENT VIDEO OUT
Audio
Vp-p
75
ohms, sync negative
output (coaxial audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (optical audio)
3 V
Audio
output (analog audio)
2.0 Vrms
(p-p),
75 Ω,
Optical
(1 KHz,
0
dB),
connector
x
x
1
1
600 Ω, RCA
jack (L, R)x2
Outputs (VCR)
Audio
-6.0dBm, less than
Video
Design
1.0Vp-p,
and
specifications
are
subject
to
change
75
ohms,
1 kohms
unbalanced
without notice.
Manufactured under license from
Confidential
unpublished
"DTS" and "DTS
Digital
works.
Out"
are
Dolby Laboratories. "Dolby" and the double-D symbol are trademarks
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
trademarks of
Digital
Theater
Systems,
of
Dolby
Laboratories.
Inc.
37
P/NO
:
3834RP0100Z
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement