LG | LSV-700W | LG LSV-700W Owner’s Manual

DIGITAL
SATELLITE
RECEIVER /
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
LSV-701W
LSV-700W
PAL
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and
completely.
Safety
Precautions / Notes
this unit
using
on
SERIAL NUMBER: The serial number is found
CAUTION
this unit. This number is
unique
on
the back of
to this unit and not available to
others.
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
Model No.
Serial No.
CAUTION: TO REDUCE THE RISK
___________________________________
___________________________________
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK).
Features:
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation mark within
is intended to alert the
important operating
user
an
(servicing)
accompanying the
product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
Brilliant On Screen
?
MPEG-2 &
?
MPEG-2 Video
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
ensure
manual
proper
use
of this
product, please
and retain for future
require maintenance, contact
see service procedure.
MPEG-1 Audio
Layer1, Layer2
LNB
?
SCPS/MCPC Receivable from C /Ku-Band Satellites
Controlling Logic (0/22KHz Tone, 13/18V, 14/19V)
?
Digital
?
Wide
Tuner with
Symbol
Loop-through
Rate
1~45Msps& Frequency Input
950~2150MHz
?
DiSEqC
1.2
Supported
?1SCARTforTV
?
User
?
256 Colors
?
Multi-language
friendly
OSD Menu with Full Function
User Interface
Graphic
Menu
?
LED
?
Variable
?
EPG(Electronic Programme Guide)
Display
Aspect
Ratio
(4:3, 16:9)
for On-screen Channel
an
authorized service location-
connecting
or
dis-
the cable from the satellite dish.
Please do not insert metal
the Modules. In
doing
or
apparatus shall
This
the
so can use
damage
to this unit and
exposed to water, dripping or
objects filled with liquids, such as vases,
apparatus.
product
is manufactured to
radio interference
Teletext and Subtitle
Supported (VBI
?
Capacity for Storing
Transponders)
Multi Channel
?
alien substance into the slots for
not be
no
Small Screen Picture
?
?
reduce its life span.
splashing and that
shall be placed on
?
read this owner's
reference, should the unit
Disconnect this unit from the mains before
The
Compliant
( MP@ML),
Information
carefully
connecting
Graphic
DVB
?
CAUTION:
To
Fully
?PLLRF-ModulatorUHF30~40withPALI/G/B/D/K
equilateral triangle
to the presence of
and maintenance
instructions in the literature
?
requirements
with the
of EEC DIRECTIVE
89/336/EEC, 93/68/EEC and 73/23/EEC.
&
OSD)
(4000 Channels,
1000
RS232C Port for Additional Information Service and
model
Software
2 Slot Common Interface for
Viaccess,
(CAS
only)
Conax, CryptoWorks, Nagravision, Irdeto and MEDIAGUARD
To
keep
Do not
comply
EPG
Favorite Channel and Parental Lock Function
Upgrading System
?
on
near
the surface clean
use
volatile
liquids,
such
as
insecticide spray,
the unit. Do not leave rubber of
contact with the unit for
leave marks
on
a
long period
plastic products in
of time. They will
the surface.
To clean the cabinet
Use
a
use a
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzine,
or
of the unit.
2
lightly
use
thinner,
are
moistened with
a
extremely dirty,
detergent
mild
strong solvents, such
as
these
as
might damage
alcohol,
the surface
Table of Contents
Introduction
18-19
Operation with Satellite Receiver
ViewingGeneralInformation...............18
ProgrammeInformation................18
.
SafetyPrecautions.........................2
Notesonusingthisunit.....................2
TableofContents..........................3
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
.
.4
RemoteControl............................5
RearPanel................................6
.
.
.
.
.
.
.
.
.
TVorRadioChannelLists..............18
FavoriteChannelLists.................18
Channellistbysatellite................18
AudioLanguageSelection..............19
.19
AudioOutputModeSelection.
ProgrammeGuide....................19
.
Preparation
.
.
.
.
.
.
.
.
.
.
Teletext&Subtitle....................19
Connections.............................7-8
ConnectingtoaTV.......................7
.7
ConnectingtoOptionalEquipment.
ConnectingtoDish.......................8
BeforeOperation-VCRpart..................9
.9
TuninginavideochannelonyourTV.
Howtousingthemainmenu................9
.10-16
BeforeOperation-DVBpart.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Sleep..............................19
.20-21
AdditionalOperation-VCRpart.
OnScreenDisplay.......................20
TapeCounterMemoryStop................20
.20
VideoDoctor(Self-Diagnosis).
.21
WideScreenCompatibility16:9.
21
Recording from another video recorder
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MenuInformation........................10
Installation..........................10-13
DishSetup..........................10
ScanSatellite........................11
ScanTransponder....................12
ResetFactoryDefaults................12
TransferData.......................12
SOFTWAREUPGRADE...............13
UserPreference......................13-14
ChannelProperties...................13
EditChannels.......................13
UninstallSatellite.....................13
Reference
Troubleshooting..........................22
Specification.............................23
About the
symbols
Indicates hazards
itself
or
for instructions
likely to cause
damage.
harm to the unit
other material
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
EditSatellite........................13
ChangePassword...................14
EventTimer........................14
SystemSetup........................15-16
Setup.............................15
ClockSet...........................15
USALSSetup.......................16
SystemInformation......................16
CAS(CASmodelonly)....................16
MenuStructure.........................16
Operation
17
Operation with your video cassette recorder
Playingavideotape......................17
Playingavideotape...................17
Autotracking........................17
Manualtracking......................17
Stoppingplay........................17
.
.
.
.
PictureSearch.......................17
FastForward/Rewind.................17
Automaticpoweroff...................17
Pausingatape......................17
RemovingtheVideotape...............17
.17
InstantTimerRecording(ITR).
.
.
.
.
.
.
.
.
.
.
.
.
3
INTRODUC
Front Panel and
Display
Window
Stop
Pause
on or
Lights
Lights
on
tape / Forward search
Display
To back
sensor
playback
tape. / Reverse search
a
Record the
in DVB mode.
Remote control
a
Start
Rewind
input
the main
step
tape.
a
playback temporarily.
repeatedly
for frame-by-frame playback.
off.
in VCR mode.
on
eject
/ Press
Forward wind
Turn the receiver
and
or
sources
menu
a
tape
tape.
a
tape.
a
to VCR.
of VCR. /
exit from
menu
of
the receiver.
Selects
Display panel
a
menu,
or
confirm the
selected
operation. And display
channel list during watching
the
a
programme.
Tape compartment
For
a
two CAM module with
smart card.
model
(CAS
Display
a
only)
Increase
cursor
Press to
eject
the each of the CAM
modules.
(CAS
model
Change
only)
or
Lights
Lights
on
on
on
decrease volume level,
channels
or move cursor
operation
on a
tracking
video
is
tape.
VCR is in
a
recording
is
in Radio channel mode.
recording
programmed.
A video
timer
on
when the
sound is muted.
VCR
recording
is
engaged.
Indicates TV mode.
model
only)
CARD SAT RADIO
TRK
MUTE
REC
TV
Multi function indicator
4
or a
tape is in the VCR deck.
when the CAM modules
(CAS
or move
in
timer
in TV channel mode.
is inserted in the slot.
of the receiver.
menu.
Lights
Lights
menu
menu.
Flashes while the automatic
in
in
the main
Remote Control
POWER
Turn the receiver on or off.
0-9 numerical buttons
Select channels or numbered
items in menu.
EJECT
Eject
Mute the sound.
VOL +/-
/
Move to the next or
page if more than
tape.
a
MUTE
Increase
list
page is
available.
previous
decrease volume level.
or
PR +/-
one
the channels.
Change
REC
Record the input sources to VCR.
LP
Select the recording speed of the
REW
Rewind
tape. / Reverse search
a
FF
tape.
Forward wind
P/STILL
Pause playback temporarily. /
Press repeatedly for frame-byframe playback.
tape. / Forward
a
?
search
Display
back
PLAY (G)
Start playback.
Select the
into
?
of VCR. / To
menu
of the
a
input
video
sources
for
recording
tape. (TV/Radio/AV1/AV2)
INFO
cur-
rent programme.
?
option.
tracking (D / E)
on the screen during
menu
TEXT
Shows the teletext contents if tele-
Manual
If noise appears
playback, press either V or v on the
remote control until the noise on the
screen is reduced.
text is transmitted.
ENTER
?
EPG
Electronic
Programme
Guide
:
Shows the TV/Radio programme
ENTER/OK
Select a menu, or confirm the
selected operation. And display the
channel list during watching a programme.
SLEEP
Set the receiver to turn off automatically after a certain amount of time.
guide.
?AZ
Sort the channels
alphabetical
?
automatically
in
order.
SAT
Shows satellite list.
?
FAV-CH
the current favorite channel
?
VCR DISPLAY
Display
play) of
group.
AUDIO
?
Sets the
menu
exit from
Shows the information of the
F/G/D/E
to the up, down,
Change
or
INPUT
?
MENU
the main menu of the
receiver.
Move the cursor
left or right
the main
step
receiver.
Stop playback.
Display
tape.
a
EXIT/ i
?
STOP
a
tape.
?
output direction for speaker.
the OSD
?
?
dis-
CLEAR
Reset the video
LANGUAGE
Shows the multi-language Audio
information.
(on-screen
VCR.
tape
counter to
zero.
TV/COMBI
Switch between TV and DVB
or
VCR modes.
RECALL
previous channel.
?
Moves to the
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
the buttons.
Distance: About 23 ft
remote
Angle:
remote
Detach the
AAA AAA
(7 m)
battery
from the front of the
installation
battery
cover on
(size AAA) batteries
aligned correctly.
sensor
the
rear
of
the remote control, and insert two R03
with
and
About 30° in each direction of the front of the
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
5
INTRODUC
Rear Panel
Connect the satellite antenna cable to this connector.
Output
the
audio
digital
signals (S/PDIF).
Connect your TV to the receiver
via a SCART cable.
Connect to
a
TV with audio
inputs or an
amplifier.
external stereo
Connect your TV antenna to
this connector.
Connect to
digital (optical)
equipment.
audio
Connect to
power
Connect to
a
a
TV with S-Video
(DVB
source.
input.
out)
exclusive
Connect the receiver to
a
PC via this
connector for additional information
service and
upgrading system
software.
If you have a second satellite receiver, connect
the second satellite receiver's LNB input to this
connector.
Connect to
a
TV with video
Receive the audio and video
external
source
to VCR.
Connect your TV to this connector.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
6
input.
signals
from
an
Connections
Tips
Depending
Rear of this unit
(S-Video connection)
your TV and other equipment you wish
to connect, there are various ways you could connect
the unit.
on
Please refer to the manuals of your TV, Stereo
or other devices as necessary to make the
PREATION
System
best connections.
Caution
--
Make
this unit is connected
sure
Set the TV to the correct video
the
TV.
to a TV
Connecting
Make
directly to the
input channel.
of the
following connections, depending
capabilities of your existing equipment.
one
on
Rear of TV
(AV)
Connect the EURO AV1 AUDIO/VIDEO
of this unit to the SCART
panel
using
TV
a
VIDEO
INPUT
AUDIO INPUT
AERIAL
Basic connection
SCART
the
on
input
socket
L
rear
SCART INPUT
S-VIDE
INPUT
R
the
on
lead.
or
Connect the AUDIO OUTPUT
(L/R)
OUTPUT
rear
this unit to the RCA
the
the RCA leads.
input
the
on
sockets
on
Basic connection
panel of
TV using
and VIDEO
or
(RF)
Connect the antenna cable from your indoor/ outdoor antenna to AERIAL jack on the rear panel of
1
this unit.
2
Connect the
RF.OUT
supplied
jack
on
the
television's Antenna
coaxial RF cable from the
panel
Input.
rear
of this unit to your
Rear of this unit
S-Video connection
You cannot watch the
playback
of the video
tape.
Connect the S-VIDEO OUT
this unit to the
S-Video in
S-Video cable.
jack
on
Connecting
the TV
to
jack on
using the
Right
AUDIO OUTPUT
this unit to the audio left and
amplifier
or
stereo
Rear of this unit
Optional Equipment
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II /Pro Logic
Connect the Left and
(Basic connection)
right in jacks
system using the audio
jacks
2 channel
stereo
analog
or
Dolby
Pro
Logic
II / Pro
Logic connection
on
on
your
cables.
Digital
Both DVB and
multi-channel
VCR out
connection
(DVB exclusive
out connecttion)
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
channel
Connect this unit's DIGITAL AUDIO OUT
jack (S/PDIF
OPTICAL) to the corresponding in jack on your
amplifier. Use a digital (S/PDIF or optical) audio cable.
or
L
R
AUDIO INPUT
OPTICAL
DIGITAL INPUT
S/PDIF
DIGITAL INPUT
Amplifier (Receiver)
7
Connections
(Continued)
to Dish
Connecting
Dish
A Fixed Dish
LNB
To the
digital receiver, you can connect either a single
satellite antenna directly or through converter box several antennas or LNB of multi-feed equipment.
You can connect a further Sat-receiver (for example
analogue), with the receiver of common antenna equipment that has satellite signals.
Several Fixed Dishes
Using DiSEqC
Our receiver is
designed to be DiSEqC 1.0 compatible.
multiple antennas to be connected to the
simultaneously.
This allows
DVB
If you have two
or more
DiSEqC
can use a
fixed antennas
or
LNB 1
or
LNB A
input
Dish
connector of the
DiSEqC
switch.
2
Connect the coaxial cable from the second LNB to
the LNB 2
or
LNB B
input
connector of the
DiSEqC
switch.
Do the
3
same
Connect
4 put
one
for other LNBs.
end of
connector of the
a
coaxial cable to the RF out-
DiSEqC
end to the LNB IN socket
Moved Dish
Please refer to
on
switch and the other
this unit.
Using DiSEqC
1.2
step 7 on page 11.
If you have a DiSEqC 1.2 motorised system, then you
can use the DiSEqC 1.2 options available.
8
Dish
LNBs, you
1.0 switch.
Connect the coaxial cable from the first LNB to the
1
Dish
Dish
Before
Tuning
Operation
in
a
Your TV receives
-
VCR part
video channel
signals
on
your TV
from the video recorder like
tune it in
so
channel number
a
on
your TV and
or satellite
tapes
The
menu
a
signal.
the
controlled from the Remote Control
menus are
Handset.
programme.
If you are using a coaxial RF cable you need to select
TV channel on your Television and tune it to the Video
the main
can easily be programmed by using
displayed on screen.
menus
that you may watch video
using
This VCR
another TV station.
You have to select
How to
1
2
Switch
on
your TV set and the receiver
by pressing
POWER.
Press EXIT/i.
The main
menu
will appear
the TV
on
screen.
If you connect a monitor or a TV set equipped with
audio and video or SCART sockets this adjustment will
not be necessary,
TV
simply
(Recommended).
select the AV mode
on
your
fOSD
ON
OFF
OPR
SYS
1
2
3
Turn
on
position
Press POWER to
put this unit
36
the television screen, the
channel.
If the test
4 your
picture
on
vacant
position
do not appear
position
O
F.OSD ON/OFF
standby
O
16:9/4:3
O
OPR
O
DR.
then
36 is your video
clearly,
go to next.
between 30 and 40
-
-
picture
-
on
The
colour
matically, however if you experience
problems you may need to do it manually.
system is changed as shown below.
Source
Mode
PAL/SECAM/
Recording
Playback
AUTO PAL
SECAM
MESECAM
AUTO PAL
SECAM
MESECAM
Recording
NTSC3.58
NTSC4.43
Playback
NTSC-PB
NTSC3.58
MESECAM
6
triple
CAM. During play your video recorder
should select the colour system auto-
screen.
Press POWER when you have finished.
system.
uses
standards, PAL, SECAM and MESE-
the front of your unit until
appear clearly on the television
Store the selected TV channel
To set the colour TV
Your video recorder
or 3 on
5
To switch the
(see p.21).
improve the playback picture.
You can set OPR only when a video tape
is playing in the video recorder.
To check a problem with your VCR
(see p. 20).
SYSTEM
O
-
To
-
television.
Press PROG. 4
the test
ON
OFF
OKi
display operational mode of your VCR to on
or off (see p. 20).
To select the aspect ratio of your TV
your TV.
on
press and hold EXIT/i on the front of your unit for
more than 3 seconds. "RF:36" will appear in the
display window. If the test picture appear clearly on
a
fOSD
DR.
RF
this unit and TV.
Select the vacant
Select
AUD
NTSC
on your TV.
Please consult your Television User Guide for information on how to do this.
System Change
NTSC4.43
If your
tape programme is NTSC3.58 or NTSC4.43,
system to NTSC3.58 or NTSC4.43 on a
multi-system TV, or NTSC-PB on a PAL TV.
O AUDIO
To select the channel for audio output.
set the
-
AUDIO icon is not
displayed
when this
unit is in DVB mode.
O
RF AUDIO
-
To select the
according
type of audio output
type.
to your TV
Tip
You
3
4
change the menu language
(See the Setup on page 15.)
can
menu.
Press 1
or
on
2 to select the desired
Press ENTER/OK and press 3
Press EXIT/ i to
remove
the
or
the DVB
setup
menu.
4 to select.
menus
from the TV
screen.
9
PREATION
Before
Operation
DVB
-
part
Dish
Menu Information
Refer to "Menu Structure"
page 16.
on
Setup
1
Press ENTER/OK
2
The following window will appear.
The right screen shows the pre-programmed 32
dishes list. If you want to change dish, select the
dish on the right screen. Press ENTER/OK in the
right screen. Dish number will change.
3
The column
on
the Dish
Setup.
Installation
the installation,
During
the bottom of the
procedure,
Turn
can
you
on
your
1
pop-up
2 appear.
The
at
for
menu
one
language selection will
language and press ENTER/OK
proceed.
<Initial
A
displayed
After you finish the setup
start watching TV or listening to Radio.
Press MENU to
3
short information is
TV and receiver.
Select
to
a
menu screen.
screen
is
menu
a
display
after
menus
the
lines
show
performing
a
are
menu.
Reset
field of text shown
Selectable lines
highlighted
the main
on
Factory
Defaults>
the TV
screen.
generally highlighted.
can
Non
not be selected. Most of
short information at the bottom of
the right screen will show the presatellite list. If you want to change
satellite, select the satellite on the right. Press
ENTER/OK on the right.
on
programmed
screen.
B
4
Use the
Up/Down (3/4)
and downwards in the
you
can move
upwards
Longitude
The column on the right will show the transponder
list of selected satellite. If you select one of the
alternative satellite name, then transponder is
changed automatically according to the satellite name.
menu.
When you have reached the required subject menu,
press ENTER/OK to confirm your selection.
When you want to return to the previous menu,
4
press EXIT/i.
Press ENTER/OK
on
the Installation. The
Password window will appear. Enter the default
password "0000" with the numeric keypad.
5
10
You
select LNB Power value as 13/18V norif the distance between antenna and
receiver is further than 60m, you can select LNB
Power value as 14/19V.
You can select a LNB Type value from the column on the right screen based on the LNB type
which is used for antenna. If you have selected
User Single or User Dual, enter LNB frequency
value directly, and press ENTER/OK.
If you select LNB Type value as 9750/10600,
9750/10750 or User Dual, 22KHz value is fixed to
auto mode, in other case you can select a value
depending on usage of 22KHz tone switch box.
can
mally
or
Before
6
Operation
DVB
part
If your antenna has connected to the DiSEqC 1.0,
select the switch type of "DiSEqC". Option specify
Select
DiSEqC input.
7
-
If you connect
of the
one
type
11.9˚E, Latitude
DiSEqC 1.2. You can change position
Motor through the "Option".
"
Go to Position" of
-
Done
-
Press ENTER/OK
of
-
equal
Move West-East
will be
will be
cursor
mode Done is
changed
:
on
the
change
right
screen,
to left. In this
-
Store Position
:
Press 1 / 2, the motor
-
position
rent
Press ENTER/OK to
save
the
cur-
position.
-
Go to Position
:
Press ENTER/OK to
motor to the stored
-
Go to Reference
motor to the 0
-
-
-
:
move
the
move
the
Press ENTER/OK to fix West limit.
Set East Limit
:
Press ENTER/OK to fix East limit.
Enable Limit / Disable Limit
:
Press ENTER/OK to
Limit & Set East Limit
USALS
8 System)(Universal
:
can
be available
status.)
Satellite Automatic Location
On USALS
Setup of System Setup, First you get
Longitude and Latitude for your dish location. Refer to USALS Setup on page 16.
Then, you select "USALS" on the "Switch Type" of
Dish Setup menu.
Then, Automatically, the values of USALS are
values of
"
Option" Menu.
automatically, the
as DiSEqC 1.2.
same
Press ENTER/OK to
Go to Reference
:
move
the
position.
Press ENTER/OK to
move
the
position.
Set West Limit
:
Press ENTER/OK to fix West limit.
Set East Limit
:
Press ENTER/OK to fix East limit.
Enable Limit / Disable Limit
:
Press ENTER/OK to
Limit & Set East Limit
with Disable Limit
position.
:
with Disable Limit
-8.1
will be
cursor
Go to Position
change.
( Set West
position.
Press ENTER/OK to
Set West Limit
change.
( Set West
:
on the right screen,
changed to left.
In this mode Done is equal to EXIT/i.
Move West-East : Press 1 / 2, the motor position
will be changed to West / East.
of
motor to the 0
to West / East.
-
-
the
are
motor to the calculated
to EXIT/i.
-
-
BAstra 1
Position
Press ENTER/OK
:
position
position
-1.2
to the location
moves
other functions
:
:
of
Execute
Done
BHotbird
Position
to "Motor". The Motor
Then, It
-
44.9˚N
:
DiSEqC input.
means
your
:
1.2 antenna to the receiv-
DiSEqC
a
er, select the switch
Longitude
can
be available
status.)
Scan Satellite
1
You
can
search the channels offered
by
the satellite
for which your antenna has been configured. Press
ENTER/OK on the Scan Satellite of the
Installation. The Scan Satellite window will appear.
scanning in the left screen,
and then move the cursor to the bottom right side
by pressing 1 / 2 to select the scan mode.
If you select one of two scan modes by 3/ 4 and
press ENTER/OK, TV & Radio channel search will
Select the satellites for
start.
shown.
And the Receiver is
of
Longitude
:
basically
entered for the value
11.9˚E and Latitude
installation site
(Italy).
:
44.9˚ N of "STAB"
BScan All Channel
channels
(FTA
+
:
searches all
Scrambled).
BScan Free Channel
:
searches
Free to Air channels.
11
PREATION
Before
2
The
Operation
-
DVB
part
umn on
scan window will appear. The colthe left window shows TV channels and the
column
on
progressing
the
right
screen
2
will shows Radio chan-
nels.
progressing scan window will appear. When
the channel search has been finished, TV & Radio
channels that you found will be shown in two
columns
Channels name in Black
is new Channel and
channel name in White
is the existed one.
If
The
on
the
screen.
B
EXIT/i while
channels
you press
searching
3 after
searching channels, the confirmation window
will appear. If you want to
nels, select "Yes".
save
the
updated
or
Reset
chan-
Defaults
Factory
Press ENTER/OK
the Reset
on
the Installation. You
can
Factory Defaults of
change the system setup into
the default values. The confirmation window will appear.
If you select the "Yes", the system setup will be reset to
the default values.
Scan
1
Transponder
Press ENTER/OK
on the Scan Transponder of the
Installation. You can search the transponder
offered by the satellite for which your antenna has
been configured. Select the satellite name, frequency,
polarization, symbol rate, code rate, scan mode,
and network search. You can also set the User PID.
If you set the network search to "Enable", you can
find more transponders through the home network.
If you input the transponder frequency, the receiver
searches other transponder besides the existing
Transfer Data
Press ENTER/OK
Installation. You
and
system
lite receiver
on
can
the Transfer Data in the
upgrade
the channel information
software from other
or
new
programmed
satel-
PC.
transponder.
BSatellite
name
BFrequency
BPolarization
(Horizontal / Vertical)
rate
BSymbol
BFEC code rate
1/2,2/3,3/4,5/6,7/8,Auto
channel, All channel
BNetwork search : Enable, Disable
BPID : Auto PID, Manual Dec, Manual Hex
:
BScan mode : Free
BPress the
change
Press the
input
Right(2) button to
transponder
Left(1 )/0~9button
the
the
If you select the values and press ENTER/OK, the
transponder search will start.
12
to
transponder manually
1
2
Select the data
source
type you want to download on the
satellite receiver, and press ENTER/OK.
You should
plug
out and in the
target satellite
receiver.
Press POWER to
see
the transfer status.
Before
3
Operation
The following
connected to
screen
-
DVB
will appear
on
part
the TV
screen
target satellite receiver.
PREATION
SOFTWARE UPGRADE
You can upgrade the DVB software. DVB checks
whether the new S/W is released when you view channels or select this SOFTWARE UPGRADE menu.
If the new version is detected, the DVB will be rebooted
automatically and the download screen will appear.
Channel
rename screen
Uninstall Satellite
1
Press ENTER/OK
on
the Uninstall Satellite of the
User Preference. You
can remove
the satellite for
which your antenna has been configured.
Press ENTER/OK in the left screen to delete the
2 satellite and all channels in the selected satellite.
Press EXIT/i after
the satellite, the confir3 mation window willselecting
appear. If you select "Yes", the
User Preference
Channel
Properties
satellite and all channels of the selected satellite
You can make the Favorite channel grouping and Adult
channel function in this menu.
When you want to watch the locked TV channels, you
need to enter the password.
To easy operation, press AZ to sort the channel list in
alphabetical order.
will be removed.
Edit Satellite
In this
can
menu you can see all satellite information and
make Delete, Edit and Add the satellite and
transponder.
To Delete, Edit and Add the satellite select the satellite
name in the left screen,
And to Delete, Edit and Add the
transponder in the right screen.
Press ENTER/OK and select
transponder
one
select the
of Delete, Edit and
Add in the pop up menu to make it.
(The last one satellite and transponder cannot be
-
-
-
-
deleted.)
Press Up/Down (3/4) to select the channel for lock
and favorite group.
Use
Left/Right
to
place
the
cursor on
the desired
group.
Press ENTER/OK to confirm your selection
and deselection).
(selection
Press EXIT/i to exit current menu, the confirmation
window will appear. If you want to save the changes,
select the "Yes".
Edit Channels
This menu can support you to delete, move and rename
the channel of normal channel.
Select one of the function in the left screen, Delete,
Move or Rename.Then move to the channel list in right
screen to select and deselect the channel.
Press ENTER/OK to delete the channel,
Press ENTER/OK and Up/Down (3/4) to move the
channel.
Press ENTER/OK to rename the channel, total 15 letters can be available for new channel name.
-
-
-
13
Before
Change
Operation
-
DVB
part
Password
You can change the password. Press ENTER/OK on
the Change Password of the User Preference, then
Password window will appear. Enter "0000" with the
numeric buttons, and then enter new password. "0000"
is the default value.
4
If the channel that you are going to reserve is a
locked channel, Reservation setting is completed
after you input password.
Press EXIT/i to cancel and get out.
5
After find the reservation item that needs to be
amended and press ENTER/OK
If a Pop-up window appears, you select a menu
and you can add, amend, delete a reservation.
If you complete reservation, press POWER and
check if the record tape is inserted.
If it is reservation time, recording will start.
Event Timer
Event Timer is to
this function, you
tion is possible.
use
easily recording function. Using
recording. Eight reserva-
can reserve
Note
Ensure the satellite channels have been tuned and stored
correctly and that the clock is set to the correct time. (Refer
to Clock Set on page 15.)
If you press ENTER/OK, and the Pop-up window
appears, select the Add menu then add a new
reservation item.
1
2
.
After you set up channel type, channel number, regular recording, reservation date, time and recording
speed, using by Left/Right/Up/Down button and
number key, you press ENTER/OK and store set-
ting
contents.
Menu
explanation
Ch Type
TV : TV channel
Radio : Radio channel
AV1 : Other device
AV2 : Other device
Mode
Once : just one time action
Daily : action execution in every day
Weekly : action execution weekly
-ChNo
Only if Ch type is TV or Radio, you can select the
channel from right channel list.
Year, Month, Date
Select the date when record is operated.
Start
Select the start time when record is operated.
Dur
Set up how long record will be operated from start
time.
-
-
-
-
-
If it is duplicated with the time zone that was
already registered at a reservation list, the alarm
message appears which it is not able to register.
In this case, you must register a reservation for
3
other time
14
zone.
-
Speed
SP
LP/EP : LP (using PAL colour signal) provides twice
times as much recording time as SP.
EP (using NTSC colour signal) provides three times
as much recording time as SP.
Please note there will be a slight loss in picture and
sound quality when using LP or EP.
Auto : Auto determines how much tape is left and
switches speed from SP to LP or EP, if necessary,
to complete recording the programme.
Before
Operation
-
DVB
part
System Setup
2
Setup
You
TV
select the
can
display language,
Output.
audio
language,
according
to
quit
change
the current
:
own
transponder
-
of the channel.
were
watching
will
Channel selection:
you select will be
displayed
in upper
right.
Audio
the value.
If you want to listen to AC3 broadcasting, press
AUDIO on the Audio Language.
Press EXIT/i to
when TV channels exist.
Means that you get current time from only one fixed
channel you specify. The time of the channel that
Display Language : English, French,
Russian, Arabic, etc...
Language : Dependent on programme
B TV Type : PAL,NTSC,PAL/NTSC
B SCART Output : RGB,CVBS
Left/Right (1 / 2)
All
to its
TV Channels
B
Press
-
The time of the channel that you
be displayed in upper right.
If you select the TV type according to your TV, the
receiver converts the input signal into a fit signal to your
TV. But you can receive bad signal on some channels.
B
screen
TV Channels
Means that you get current time from each channel
whenever you change channel. The time can differ
and SCART
type,
This is the
3
menu.
If you select one channel
Channels by ENTER/OK,
(eg.DWTV)
--:--
will be
in TV
displayed
in
upper right until time is gotten from the channel of
satellite. At this time, please wait for getting time.
Clock Set
Clock Set is for
There
In
setting current time.
(TDT and USER mode).
reservation recording, it is recommended
two modes
are
case
of
set the mode to TDT and TV Channels to
one
to
fixed
channel.
-
Mode
TDT
Receive the time from Satellite.
:
USER
-
:
Set the time
directly by
user.
Time Offset
Set the time difference between GMT and the local
time.
(eg.
Verify
Dubai: GMT
+
04:00)
if the Time Offset is correct. If it is not correct,
press Left/Right (1 / 2) to adjust the value.
and decrease by 30 minutes)
-
(Increase
1
one
channel
If the
or
All to
get
gotten from the channel you select
it will be
displayed
displayed in upper right.
time does not match with your local
time, try another channel for getting correct time.
After you get correct time, press ENTER/OK to
store all
TV Channels
Select
When time is
4 (eg.DWTV),
setting
and exit this
menu.
If you press EXIT/i, it will not be stored and you
just exit this menu.
current time.
can
This is the Clock Set initial
screen when any TV
channel does not exist. The default mode of Clock
Set is TDT.
If
no
channel exists to
bring current time, TV
displays None and 00:00 becomes
time, displayed in upper right side.
Channels
current
the
15
PREATION
Before
Operation
DVB
-
part
Even if you can't get correct time by setting TV
Channels in TDT mode, you can set up manually
current time(year,month,date,hour,min) in USER
5
mode.
When you plug out and in, the time you set up will
be initialized to 00:00. So, you need to set up TV
Channels to get the initial time.
TV Channels
-
All
-
You
Channel selection
Get the initial time from the
were
(CAS
model
only)
only Free To-Air services, but also scrambled services using the Conditional Access Modules(CAM).
This DVB currently supports six kind of CAM(Irdeto, VIACCESS, Nagravision, CONAX, CryptoWorks, MEDIAGUARD).
not
can see
Also it
to
:
Get the initial time from the channel you
watching before plugging out.
TV Channels
CAS
see
supports Common Interface of two slots. If you want
scrambled services, contact your service provider or
distributor of Common Interface module and smart card
depended
on
the service
provider.
:
specified
channel you
select.
Note
Attention to the static
USALS
You
can
pull
Setup
set values of
Longitude
and Latitude for your
dish location.
Enter the values with the numeric
Use the
Right(2),
you
electricity
when you
put CAM in
or
CAM out.
Menu Structure
keypad.
select North/South and
can
Installation
East/West.
Installation
B
1.Dish
Setup
2.Scan Satellite
3.Scan
Transponder
Factory Defaults
4.Reset
5.Transfer Data
6.SOFTWARE UPGRADE
User Preference
B
System
You
Main Menu
Information
Model ID,
system
Hardware Version, S/W Version and Loader Version. Press
can
see
ENTER/OK
the
on
the
information such
System
Information.
as
User Preference
1.Channel
Properties
2.Edit Channels
Installation
3.Uninstall Satellite
User Preference
4.Edit Satellite
System Setup
5.Change
System
CAS
Information
Password
6.Event Timer
(Option)
System Setup
System Setup
B
1.Setup
2.Clock Set
3.USALS
System
Information
B
System
B
CAS
CAS
16
Setup
Information
with your video cassette recorder
Operation
Playing
Before
video tape
a
Instant Timer
you should ensure that your television and
your unit have been plugged in and switched on and that
the video channel on your television is selected.
starting,
Playing
a
video
Press PLAY
runs
tape
N.
The television
screen
will
display
PLAY.
Auto tracking
Your video recorder will automatically
give you the best picture quality.
Manual
adjust
the
tracking
to
tracking
If noise appears on the screen during playback, press
either V or v on the remote control until the noise on the
x to
Picture Search
While a video cassette is
halt video
the
on
2
play.
playing
can
you
search the
tape
specific
a
or
FF M to make the
tape play rapidly for-
backwards.
or
3
FF M for fast forward. While you are
warding you can view the section you
and hold either REW m
Releasing
REW m
or
or
or
rewinding or fast forare passing. Press
FF M.
FF M will return the Video recorder
fast forward
4
ture
on
ence
a
normal and does not
Video recorder
mean
damaged.
By repeatedly pressing P/STILL
frame at
one
a
6
giving you a still picdisplay some interferthat the video
the
picture
tape
7
or
the
tape
can
or
advances
be
+
or
-
arrow
facing
away from you.
to select the channel you wish to
record.
If you wish to record directly from the SCART or
RCA sockets repeatedly press INPUT until the
Press LP if you wish to record in
Standard
Long Play
or
Play.
Press REC
to start
recording.
Press REC
several times. Each successive press
will increase the record time by 30 minutes until you
a
maximum of 9 hours.
Press P/STILL X to avoid
recording
unwanted
scenes.
8
Press STOP
x to
end
recording.
your Video recorder.
the Video tape
Press EJECT Z to remove the video tape from your Video
recorder.
If the end of the tape is reached, your Video will automatically stop, rewind, eject the tape and place itself into standby mode.
Removing
tab into your
Press P/STILL X to continue recording.
If you press P/STILL X during ITR, this unit will
enter the record pause mode and ITR is cancelled.
Tapes can be paused for up to 5 minutes. After 5
minutes your VCR will stop recording to prevent
damaging the video tape or your VCR.
time.
paused for up to 5 minutes. The Video will
automatically stop playing in order to avoid damaging
tape
then
up and the
Press PR
reach
If you press FF M, the picture will be slowed down at
about 1/19 times the normal playback.
The
protection
Tips
are
X
video cassette with
VCR.
NTSC colour signal : SP or EP
PAL colour signal : SP or LP
in the form of black and white horizontal lines. This is
perfectly
5
tape
P/STILL X will pause play,
the screen. This picture may
a
your VCR.
socket you wish to record from is displayed.
AV 1 for recording from EURO AV1 AUDIO/VIDEO
SCART socket on the rear of your unit.
AV 2 for recording from VIDEO and AUDIO (Left &
Right) sockets of VCR IN AV2 on the rear of your
unit.
operation.
Automatic power off
By pressing POWER while rewinding a tape the video
recorder will turn off automatically when the tape rewind
has completed.
Pausing
Pressing
Insert
on
You may also directly select programme number
using the numbered buttons on the remote control.
Fast Forward / Rewind
To fast forward or rewind at maximum speed, the tape must
not be in play mode.
Press STOP x then press either REW m for rewind or
to normal rewind
that you have correctly connected your
described earlier in this book.
sure
as
The video cassette should have the window side
tape.
Press REW m
Make
VCR
facing
forward and backward to look for
wards
1
Press POWER to turn
Stopping play
Simply press STOP
position
out.
Your VCR incorporates Long Play (LP) which enables you
to record up to twice the amount of time on a video tape.
For example an E-180 will record up to 180 minutes using
Standard Play (SP); using LP you will be able to record up
to 360 minutes. EP (using NTSC colour signal) provides
three times as much recording time as SP. Please note
there will be a slight loss in picture and sound quality
when using LP or EP.
is reduced.
screen
Recording (ITR)
Your VCR allows you to make recordings using a variety
of simple methods:
Instant Timer Recording (ITR) start recording immediately for a set period of time or until the video cassette
Notes
If you do not wish to record
on a tape (this can happen
quite easily by accident!) remove the protection tab on
the back edge of the video cassette.
It is possible to record on a video cassette with the
record protection tab removed by covering the hole
with self adhesive
tape.
17
OPERATION
Operation
with Satellite Receiver
Viewing General
This section
ing
TV
or
the
Information
explains
general
listening to Radio.
Programme
Whenever you press FAV-CH, the channel mode will be
changed
information while watch-
Information
Whenever you press INFO, the programme information
window will appear for a few seconds.
Favorite
as
follows: Normal ,Favorite
2()
Fav.2
,Favorite
When you want to
see
1()
Fav.1
,
3()
Fav.3
the next
or
previous
channel page,
/
press double arrow Up/Down (
).
When you want to get the information about the
TV/Radio channel, press INFO.
When you want to sort the channels, press AZ.
If you press SAT on the channel list, satellite list
appears. At this time, you can see the channel list by
each satellite, with selecting a satellite that you want.
Favorite Channel Lists
In the channel list, you can get the favorite channel group
list by pressing FAV-CH on the remote controller. If any
favorite group wasn't registered, the following window will
not appear. Refer to "Channel Properties" on page 13 for
more details.
If you press INFO
again
on
the information mode, the detail
EPG window will appear.
B
Favorite channel group
Fav 1 ->Fav 2 ->Fav 3
The button usage of the favorite mode is the
ones of the normal mode.
TV
or
name:
same as
Radio Channel Lists
While
watching TV or listening to Radio you can get the
channel list by pressing ENTER/OK on the remote controller. Press Up/Down (3/4) to move the cursor. If you
Channel list
by
satellite
press ENTER/OK on the desired channel, you can watch
the channel screen. And if you want to hide the channel list,
press EXIT/i.
You
can see
you
are
satellite list
TV.
immediately
if you press SAT while
watching
At this time, you move to a satellite that you want using by
Up/Down button. If you press ENTER/OK, channel list of
that satellite appears.
18
Operation
with Satellite Receiver
Language Selection
Audio
Press
Press LANGUAGE on the remote controller to select the
desired audio language.
Press
Up/Down (3/4)
to
move
to
a
desired audio
language
and ENTER/OK to select it.
The
mark indicates the audio
being
used. You
from Audio
input
can
language
select
a
menu
if
language currently
language
only the language is
desired audio
the programme.
on
Press
Up/Down (3/4) to move to other channel.
Left/Right (1 / 2) to see the guide about the
gramme.
Press INPUT to
change
pro-
the TV/Radio mode.
Whenever you press FAV-C H, the channel mode will be
changed as follows:
Normal , Favorite
,Favorite
3()
quit
1()
Fav.1
, Favorite
2()
Fav.2
Fav.3
Press EXIT/i to
the current
menu.
Teletext & Subtitle
Press TEXT
on
be moved to
the remote controller, the teletext page will
100, and then you can see the teletext
no.
contents if teletext is transmitted. Even if your TV does not
support the teletext, you
can see
the teletext contents
by
OSD.
Audio
Output
Press AUDIO
direction for
on
Mode Selection
the remote controller to set the
Whenever you press AUDIO, the
changes as follows:
Leftt
Setting
of
output
speaker.
Right
Left+Right
t
speaker output
speaker output
is
possible
t
mode
Stereo
every each channel.
Programme Guide
Sleep
If you press SLEEP on the remote controller, the following
window will appear. The sleep timer automatically switches
the receiver to
standby
after the
preset time elapses.
Press EPG on the remote controller, you can get the electronic programme guide if applicable. Press Left/Right (1 / 2)
to see the guide about the programme, and then press
INFO, the detail EPG window will appear.
Press SLEEP several times
or
the desired number of minutes.
as
continuously to select
Sleep timer will appear
follows: 120, 90, 60, 30, 20 and 10.
once. The remaining sleep time will
Press SLEEP
appear on the
Press SLEEP
screen.
repeatedly until the display Sleep
then the sleep timer will be released.
---
appears, and
When you turn the receiver off, the receiver releases
the preset sleep time.
19
OPERATION
Additional
On Screen
Operation
-
VCR part
Video Doctor
Display
(Self-Diagnosis)
You may easily display the tape counter, amount of tape
left, audio mode, channel, tape speed and operational
This feature informs you that there is a problem with
your VCR. These error messages will appear on the TV
mode of your VCR will appear on the TV screen. If a
recording is taking place these On Screen Displays will
screen.
not be recorded onto the video
1
Press VCR DISPLAY to
The
tape
tape.
1
Press 1
or 2
to select DR.
Press ENTER/OK.
display.
counter and amount of
Press EXIT/i.
tape left will
appear if there is a tape loaded.
After 5 seconds the displays are cleared.
If you press VCR DISPLAY again within 5 seconds,
the tape counter and amount of tape left are
fOSD
2 only
ON
OFF
OPR
DR.
DR.
SYS
OKi
RF
AUD
displayed.
Press VCR DISPLAY
and amount of
again
to
remove
the counter
tape left.
HEAD STATUS
TAPE STATUS
OK
Tape Counter Memory Stop
The
be displayed on the display
by repeatedly pressing VCR
DISPLAY on the remote control. The Digital Tape
Counter indicates the relative positions of recordings on
Digital Tape
Counter
can
window instead of the time
the
i
DR.
2
Press
3 or 4
to check
a
problem.
HEAD STATUS
OOK
O
tape.
PLEASE CLEAN:
Clean your video heads.
1
Press VCR DISPLAY.
TAPE STATUS
Press CLEAR to set the counter to 0:00:00.
Press PLAY N
or
The
start
recording.
display the actual play
tape counter will
hours, minutes and seconds.
2
Press STOP
x
when
playback or recording
20
NOT RECORDABLE:
Insert
O
is
complete.
tape will rewind and automatically stop when
the counter returns to 0:00:00.
RECORDABLE
O
time in
Press REW m.
The
O
3
a
tape with its protection tab in place
NO TAPE IS LOADED
Press EXIT/i to
remove menus
from the TV
screen.
Additional
Operation
Wide Screen
Your unit
can
VCR part
Compatibility
record and
ratio programmes
-
play
a
Recording
from another video
recorder
back wide
To record
(16:9).
16:9
screen
wide
aspect
screen
for-
mat programme successfully the correct type of wide
screen signal must be broadcasted by the TV station.
With this video recorder you
an external source, such as
recorder
on your unit.
Press EXIT/i.
can
make
copying
recordings
from
from another video
camcorder.
or a
Switch
1
Note
PressForGtoselect
In the
.
Press ENTER/OK.
following description, this video recorder will be
recording and will be referred to as VCR
The other appliance will be used for playback and will
one
B.
used for
be referred to
AUTO
fOSD
SYS
2
OPR
AUD
ON
OFF
DR.
OKi
RF
Press D
or
E
SYS
repeatedly
1
4:3
16:9
fOSD
ON
OFF
OPR
AUD
DR.
i
RF
to select:
AUTO,
4:3
or
16:9.
as
VCR A.
VCR A should be connected to the SCART socket
on
the
panel
panel of
rear
the front
of your unit
your unit.
Insert the recorded
2 tape
or
the AV sockets
tape into VCR A and
a
on
blank
into VCR B.
AUTO:
Automatically plays
back Wide-Screen
programmes
as
Wide-Screen and Normal
programmes
as
normal.
3
Press INPUT until the socket you wish to record
displayed on the VCR B.
from is
4:3
Only for playing back
recordings (4:3).
and
recording
AV 1 for
normal format
AV 2 for
16:9:
Only
for
format
recording
SCART socket
playing back and recording
recordings (16:9).
Right)
Wide-Screen
on
recording
from EURO AV1 AUDIO/VIDEO
the
rear of your unit.
from VIDEO and AUDIO
sockets of VCR IN AV2
on
the
rear
(Left
&
of your
unit.
4
To start
5
When you want to finish
both video recorders.
PLAY
recording,
on
press REC
on
VCR B and
VCR A.
AUTO
4:3
16:9
fOSD
ON
OFF
SYS
3
Press EXIT/i to
OPR
AUD
DR.
i
RF
remove
the
menus
copying,
press STOP
x on
from the TV
screen.
To
enjoy
Wide-Screen
playback you must
using a SCART
connect your unit to the TV
cable.
21
OPERATION
Troubleshooting
There may be various reasons for the abnormal
procedures shown below.
If you can't solve the
receiver cover. It may
problem
cause a
after
referring
dangerous
situation
even
display
No
panel
this trouble
shooting, please
doesn't
The power cord is not
Remedy
plugged
in.
Check that the power cable is
into the wall outlet.
any message.
picture
or
sound.
Wrong
connection of the Audio/Video
output
or
Wrong
connection of the satellite antenna.
No
or
SCART of the receiver to TV.
Bad
signal
mess-age appears.
Connect the Audio/Video
Connect the antenna cable
Check that you have tuned into
on your TV.
poor
correctly.
or
adjust
the
position.
Press MUTE.
muting.
a
video
channel
or a
or
correctly.
Check other device connected between
LNB and the receiver,
No picture
picture.
plugged
output
SCART of the receiver to TV
antenna
Audio
to the
according
contact the dealer. Don't open the
Cause
Symptom
The front
of the receiver. Check the receiver
operation
The receiver can't receive the
Refer to the
on
signal.
your TV"
"Tuning
Incorrect values of
some
tuner parame-
a
video channel
Check the satellite antenna cable,
replace the cable, or connect the cable
to the receiver
ters.
in
page 9.
on
tightly.
Set the values of tuner
rectly
in the Installation
Try
different video
a
parameters
cor-
menu.
tape. If the problem
is resolved, the problem may have been
the video tape itself.
No
bad
or
The satellite dish is not
signal.
pointing
at the
Adjust
Signal
too
Connect the
strong.
LNB
Satellite dish is too small.
The LNB is
You have
the dish.
satellite.
forgotten
faulty.
attenuator to the
larger
dish.
Change
to
Change
the LNB.
a
Contact your dealer, and then reset your
receiver.
your
PIN number.
The remote controller
The batteries of the remote controller
does not
are
operate.
signal
input.
not inserted
or
exhausted.
Check whether the batteries
are
inserted
in your remote controller.
Check and replace the batteries of the
correctly
remote controller.
Poor
picture quality.
Low LNB power
or
signal
loss in cable.
Change
menu
Less channels in
the LNB power in dish set up
to 14v/19v.
scan-
ning.
Video Head Cleaning
Whenever a video cassette is inserted into or ejected from your VCR the video head is automatically cleaned. This
should mean that additional head cleaning should not be necessary.
However dirt accumulating on the head after a long period of time can cause the playback picture to become blurred
or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged
tapes might.
22
Specification
Tuner & Demodulator
Input Frequency Range
RF Input Signal Level
RF Impedance
950MHz to 2150 Mhz
IF Bandwidth
55MHz/8MHz(Under 5Msps)
-25 to -65dBm
75
LNB Power
13/18DC, 14/19V +/-5%, 0.5Amax, 0.8Apeak overload protected
LNB Tone Switch
22kHz +/-2kHz,
Control
DiSEqC
Demodulation
REF NC
+/-0.2V
QPSK
Rate
Symbol
0.6Vpp
Version 1.2, Tone burst A/B
1~45Msps/SCPC,MCPC
MPEG
Transport Stream
Input Rate
MPEG-2 ISO/IEC 13818
Video
MPEG-2 MP@ML
Audio
Stream
Specification
MPEG-1/2 Audio Layer 1,2
4:3, 16:9 Selectable by VCR Menu Setting
Ratio
Aspect
Transport
Max.15Mbit/s
Video Resolution
720x576(PAL), 720x480(NTSC)
Audio Mode
Stereo, Dual channel, Joint stereo, Mono
Audio
32/44.1/48kHz
Sampling Frequency
Connector
LNB IF
F
SCART
type, IEC 169-24 Female
type, IEC 169-24 Female
RGB, CVBS, L, R OUT
Serial Port
RS232C D-sub male
S/PDIF
Fiber-Optical
S-Video
Mini Din connector
3 RCA
input
CVBS, L/R IN
3 RCA
output
CVBS, L/R OUT
input
Loop-through Output
LNB IF
F
type
and Coaxial
Digital
Audio
Output
RF-modulator
RF-Connector
75
Frequency
Output Channel
470MHz to 860MHz
EC169-2, Male/Female
TV Standard
PAL B/G/I/D/K Selectable
CH 30-40 for the Demodulator
by
VCR Menu
Setting
Power
Supply
Input Voltage
Power Consumption
110~240VAC(SMPS), 50/60Hz
Max. 24W
Dimensions
Appr.430X83.5X360mm(WXHXD)
Appr. 4.9KG
Weight
Operating Temperature
Storage Temperature
PCMCIA
model
(CAS
0˚C~45˚C
-10˚C~50˚C
only)
Number of Slot
2
Type
I, II DVB Common Interface Standard
Design
and
specifications
are
subject
to
change
without notice.
23
P/NO
:
3834RV0014H
Download PDF

advertising