LG | V774WK | LG V774WK Owner’s Manual

DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
V774WK
PAL
BZ03
Before
connecting, operating
or
adjusting this product,
carefully and
read this instruction booklet
please
completely.
Safety Precautions/Important
notes on
controlling
CAUTION
Notes
copyrights:
It is forbidden
by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyright material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
on
this unit
(OR BACK)
discs.
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
This
an
shock to persons.
This
product incorporates copyright protection technology that
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
is
SERIAL NUMBER: The serial number is found
on
the back of
this unit. This number is
The exclamation mark within
is intended to alert the
user
equilateral triangle
an
to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
to
___________________________________
___________________________________
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINIWARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
TION TELEVISION SETS ARE FULLY COMPATIBLE WITH
TRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE 'STANCLASS 1
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT
LASER
DARD DEFINITION'OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
Features:
CAUTION:
This
To
Digital
ensure
Video Disc
proper
use
Player employs
of this
a
Laser
?
Complete versatility
Tapes.
?
Watch
System.
product, please read this owner's
carefully and retain for future reference, should the unit
require maintenance, contact an authorized service locationsee service procedure.
?
manual
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The
dripping
such
as
apparatus shall not be exposed to water,
splashing and that no objects filled with liquids,
vases, shall be placed on the apparatus.
?
?
a
DVD while
play DVD, VCDs, audio CDs
to
recording
a
or
VHS
TV show to the VCR.
Remote controls both DVD and VCR decks.
Records from DVD to VHS
with Macrovision).
(unless
DVD is copy
protected
Hi-Fi Stereo VCR.
Important
notes on
controlling
this
unit
This unit uses one set of controls to operate both DVD
and VCR. The following buttons are helpful in
successfully controlling each part.
or
1
2
POWER Button
Press the POWER button on the remote control
front panel to turn on this unit.
or
DVD Button
Press DVD button
on
the remote control when you
want to control the DVD.
The DVD indicator will light on the front panel
display to show that the DVD is selected.
VCR Button
3 Press the VCR button
on the remote control when
you want to control the VCR.
The VCR indicator will light on the front panel
display to show that the VCR is selected.
4
DVD/VCR button
Press the DVD/VCR button on the front panel to
control between the DVD and the VCR.
toggle
2
Table of Contents
Introduction
SafetyPrecautions.........................2
2
Important notes on controlling this unit.
.
.
.
.
.
.
.
.
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
.
RemoteControl............................7
RearPanel................................8
Preparation
Connections............................9-10
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
.11-15
BeforeOperation-VCRpart.
.11
TuninginavideochannelonyourTV.
.11
UsingyourVCRfortheveryfirsttime.
SettingtheclockManually.................12
Tosetthecoloursystem..................12
Howtousingthemainmenu...............13
.13
TuninginTVstationsAutomatically.
.14
TuninginTVstationsManually.
.15
ChangingtheorderofTVstations.
DeletingTVstations......................15
.16-19
BeforeOperation-DVDpart.
GeneralExplanation......................16
On-ScreenDisplay.......................16
InitialSettings........................17-19
17
Initial Settings General Operation.
Language..........................17
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................17
Sound.............................18
Others............................18
ParentalControl......................19
Operation
OperationwithTape.....................20-22
Playingatape..........................20
.20
CM(CommercialMessage)Skip.
.20
OPR(OptimumPictureResponse).
.21
InstantTimerRecording(ITR).
22
Timer recording using On Screen Display.
.23-25
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............23
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
GeneralFeatures........................23
MovingtoanotherTITLE...............23
23
Moving to another CHAPTER/TRACK
.
.
.
.
.
SlowMotion.........................23
24
Still Picture and Frame-by-Frame Playback
Search.............................24
Random...........................24
.
.
.
.
Repeat............................24
RepeatA-B.........................24
TimeSearch........................24
3DSurround........................24
Zoom..............................25
MarkerSearch.......................25
Operation with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
NotesonMP3/WMARecordings.
.
.
.
.
26-27
.
.
.
.
.
.
.
.
.
.
26
.26
Pause.............................27
MovingtoanotherTrack...............27
RepeatTrack/All/Off..................27
Search.............................27
Random...........................27
RepeatA-B.........................27
3DSurround........................27
.27
ChangingtheAudioChannel.
OperationwithJPEGDisc...................28
ViewingaJPEGdisc.....................28
MovingtoanotherFile.................28
.
.
.
.
.
.
.
.
.
.
StillPicture.........................28
Toflipthepicture.....................28
Torotatepicture......................28
.28
NotesonJPEGRecordings.
ProgrammedPlayback.....................29
Programmed Playback with Audio CD and
.
.
.
.
.
.
.
.
.
.
.
MP3/WMAdisc.........................29
.29
ProgrammedPlaybackwithVideoCD.
.29
RepeatProgrammedTracks
.29
ErasingaTrackfromProgramList.
.29
ErasingtheCompleteProgramList.
.30-31
AdditionalOperation-VCRpart.
OnScreenDisplay.......................30
TapeCounterMemoryStop................30
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ChildLock.............................30
.30
VideoDoctor(Self-Diagnosis).
ez(easy)repeat.........................30
Hi-FiStereoSoundSystem................31
.32
AdditionalOperation-DVDpart.
LastConditionMemory...................32
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ScreenSaver...........................32
VideoModeSetting......................32
SpecialRecording.........................33
CopyingfromDVDtoVCR.................33
33
Recording from another video recorder
.
.
.
.
.
.
.
Reference
Troubleshooting..........................34
LanguageCodeList.......................35
CountryCodelist.........................36
Specification.............................37
About the
symbols
for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
SpecialDVDFeatures....................25
TitleMenu..........................25
DiscMenu..........................25
CameraAngle.......................25
.25
ChangingtheAudioLanguage.
.25
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles...........................25
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In addition, this unit
play
can
a
DVD-R, DVD±RW,
Kodak PICTURE CD and CD-R
audio titles, MP3, WMA
(DVD only)
DVD
or
or
CD-RW that contains
JPEG files and SVCD also.
or
accompanying
feature content
additional feature content, or music album. Each title
is assigned a title reference number enabling you to
locate it easily.
Chapter (DVD only)
Sections of a picture
or a
musical
piece
that
are
smaller
than titles.
A title is
composed of one or several chapters. Each
assigned a chapter number, enable you to
locate the chapter you want. Depending on the disc, no
chapters may be recorded.
is
chapter
Notes
--
Depending
the conditions of the
recording equip(or DVD-R/±RW) disc itself,
some CD-R/RW (or DVD-R/±RW) discs cannot be
played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregular shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
on
ment or the CD-R/RW
--
--
Notes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be avail-
Track
(Video
Sections of
enabling
On
Regional
player
player is designed and manufactured
for playback of region "2" encoded DVD soft2
ware. The region code on the labels of some
DVD discs indicates which type of player can play those
discs. This unit can play only DVD discs labeled "2" or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
This DVD
4
on a
a
video CD
track number,
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
Types
There
of video CDs
are
two
with the
and DVDs
only)
piece
assigned
musical
Scene
Video CDs. Some DVDs made for business purposes
may not be played on the unit.
code of the DVD
or a
you to locate the track you want.
Video CDs
or
CD and audio CD
picture
audio CD. Each track is
or an
other functions may be added.
Refer also to the instructions applied with the DVDs and
able,
a
PBC
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
Video CDs not
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Continued)
Precautions
Storing
After
the unit
Handling
When
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
The
When
the unit
setting
picture and sound of a nearby TV or radio may be
distorted during playback. In this case, position the unit
The
away from the TV or radio,
removing the disc.
To
keep
Do not
near
or
turn off the unit after
volatile
liquids,
contact with the unit for a
leave marks
such
as
on
long period
Cleaning
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
ter out.
plastic products in
of time. They will
the surface.
soft, dry cloth. If the surfaces
soft cloth
lightly
solution. Do not
benzine,
light, as there may be a considerable temperature
increase inside the car.
insecticide spray,
To clean the cabinet
a
store the disc in its case.
the unit
Cleaning
Use
playing,
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
the surface clean
use
the unit. Do not leave rubber of
use a
discs
are
moistened with
a
extremely dirty,
detergent
mild
strong solvents, such as alcohol,
thinner, as these might damage the surface
or
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
records.
vinyl
use
About
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
5
INTRODUC
Front Panel and
Display
Window
Go to NEXT
Forward Skip/Scan, Fast-Forward (
chapter/track. Press and hold for two seconds
)
for
a
fast forward search. Winds the tape forwards.
Reverse
Go to
DVD OPEN/CLOSE
Opens
or
Insert
DVD to VHS
(
)
closes the disc tray.
Copy
a
Press and hold for two seconds for
a
fast
reverse
search. Rewinds the tape.
Disc Tray
disc here.
PAUSE/STEP (
/
)
playback temporarily / press
repeatedly for frame-by-frame playback.
Button
Pause
ENTER
Acknowledge
Skip/Scan, Rewind (
)
beginning of current chapter/track or to
PREVIOUS chapter/track.
menu
STOP(A)
Stops playback.
selection.
POWER
VCR Record
Switches the
unit to ON or
OFF.
Tape Compartment
POWER
Display
Video IN Jack
Audio IN
(L/R)
window
PLAY
Shows the current status
Jacks
Starts
of the unit.
( G)
playback.
FGDE(left/right/up/down)
-
Select
an
item in the
menu
(FGDE).
-
Select channel programme of VCR
Remote Sensor
DVD/VCR
Point the remote control here.
Selector
Tape Eject
(PROG. DE).
Flicker when
a
DVD disc is the title
Programmed playback
repeat mode.
CHPTRK
Indicates current
chapter
or
track number
A disc is loaded in the DVD deck. (Lights when a disc is
loaded in the DVD deck and flashes when no disc is loaded.)
active.
Indicates repeat mode.
Bilingual
MP3 disc is inserted.
mode
Indicates total
VCR deck is
selected.
playing time/elapsed
The current TV show
DVD deck is
selected.
or
DVD to VHS copy is in progress
VCR
Video
CD is
inserted.
recording
is
engaged
The Hi-Fi track of
a
VHS tape is playing
Cassette-In indicator
Indicates TV
mode.
(See Notes on
page 21.)
A timer
VCR MP3
DVD RPT ALL AB
VCD
TV
6
time/current time
video is broadcast in stereo
PROG
TITLE CHPTRK
BIL
STEREO COPY
REC
Hi-Fi
is
recording
programmed
or
in progress
Child Lock is
engaged
Remote Control
DVD/VCR select button
Selects
operational
OPEN/CLOSE
EJECT
Open or close the the disc
mode of remote
control.
POWER
Switch this unit ON
or
AV
OFF.
Select
OPEN/CLOSE
EJECT
POWER
TV/VCR
DISPLAY
CLK/CNT
Access the On-Screen Display.
DVD
counter.
CLK/CNT
SETUP
/ i
SETUP/ i
Access
Display
or remove
the title
menu
setup
DISC MENU
-
ENTER
RETURN
menu.
?
BACKWARD
PLAY
FORWARD
PROGRAM
PAUSE/STEP (
)
playback temporarily / press
repeatedly for frame-by-frame
playback.
STOP(A)?
Stops playback.
AUDIO SUBTITLE MARKER
subtitle
C.LOCK ANGLE
ZOOM
REPEAT RANDOM
A-B
Mark any
PLAY
Starts
SEARCH
ez
REPEAT CM SKIP
LP
camera
angle
?
PROGRAM
Access or remove program menu.
CLEAR
Clear a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
?
?
-
?
if available
on
Press and hold button for about
two seconds.
-
CHILD LOCK
Switch the Child Lock
Reverse SKIP/SCAN (
)/
Rewind
Search backward* / go to beginning
of current chapter or track or go
to previous chapter or track.
Rewinds the tape.
-
*
menu.
ANGLE
Select DVD
(G)
playback.
-
?
point during playback.
MARKER SEARCH
Winds the tape forwards.
?
SEARCH
language.
MARKER
Display
-
a menu.
SUBTITLE
a
into tape.
Press and hold button for about
two seconds.
?
language (DVD) or
audio channel (CD).
Select
sources
*
audio
an
input
Forward SKIP/SCAN (
)/
Fast Forward
Search forward* / go to next
chapter or track.
-
0-9 numerical buttons
AUDIO
Remove the setup menu.
the menu of a video CD
with PBC.
CLEAR
Pause
an
DVD disc.
-
?
Select
a
-
available.
Select numbered items in
into
Displays
REC/ITR
Record your
REC/ITR
TITLE PAUSE/STEP STOP
TITLE ?
of the disc if
recording
RETURN
SELECT
-
Select an item in the menu
Select channel programme of VCR.
for
SELECT/ENTER/OK
Acknowledge menu selection.
OK
-
source
DISC MENU
Access menu of
AV
DISPLAY
FGDE(left/right/up/down)
-
VCR
input
tape.
Switch between your TV's tuner and
the VCR's internal tuner.
or
Tape Eject.
-
TV/VCR
Shows you the current time
tray.
-
?
and off.
REPEAT/ez REPEAT
-
-
?
Repeat chapter, track, title,
ez
all.
REPEAT
A-B/LP
-
-
Repeat sequence.
Select the recording
speed
of the
tape.
?
RANDOM/CM SKIP
Play tracks in random order.
-
-
?
CM SKIP
ZOOM
Enlarge
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
the buttons.
Distance: About 23 ft
Detach the
AAA AAA
(7 m)
from the front of the
image.
installation
battery
cover on
the
rear
of
the remote control, and insert two R03
(size AAA) batteries
aligned correctly.
remote sensor
Angle:
battery
video
with
and
About 30° in each direction of the front of the
remote sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel
AUDIO IN
(Left/Right) (VCR IN AV1)
signals from an external
Receive the audio
AUDIO OUT
Connect to
source
to VCR.
(Left/Right) (DVD/VCR OUT)
amplifier, receiver or stereo system.
an
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
Connect to
a
TV with Y Pb Pr
AUDIO OUT
Connect to
(Y
Pb
Pr) (DVD
EXCLUSIVE
inputs.
(Left/Right) (DVD EXCLUSIVE OUT)
amplifier, receiver or stereo system.
an
AERIAL
Connect the aerial
using
this
jack.
Pr
R
Pb
L
Y
OPTICAL
out
(Digital
audio
jack)
Connect to
audio
digital (optical)
equipment.
AC Power Cord
Connect to
COAXIAL
a
Connect to
VIDEO IN
a
(VCR
(DVD/VCR OUT)
TV with video inputs.
IN
Receive the video
S-VIDEO OUT
Connect to
RF.OUT
a
(DVD
AV1)
signals
from
EXCLUSIVE
TV with S-Video
(DVD/VCR OUT)
using this jack.
Connect to your TV
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
source.
(Digital audio out jack) (DVD EXCLUSIVE OUT)
digital (coaxial) audio equipment.
Connect to
VIDEO OUT
power
an
external
OUT)
input.
source
to VCR.
OUT)
Connections
Tips
Depending
Notes
your TV and other equipment you wish
to connect, there are various ways you could connect
the unit.
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
For better sound reproduction, connect this unit's
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page 10.
--
--
on
Caution
Make sure this unit is connected directly to the TV.
Set the TV to the correct video input channel.
Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Connecting
-
-
to a TV
Make one of the following connections, depending
the capabilities of your existing equipment.
When using the COMPONENT VIDEO OUT jacks,
set TV's INPUT to COMPONENT VIDEO.
When using the S-VIDEO OUT jack, set the TV's
INPUT to S-VIDEO.
-
on
Set the
Progressive to "On" on the setup menu for
progressive signal, see page 17.
Once the setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that "NO dISC" is displayed on the display window.
2) Press STOP and hold it for five seconds before
releasing it. The video output will be restored to
the standard setting and a picture will once again
be visible on a conventional analog TV or monitor.
Progressive scan does not work with the analog
video connections (yellow VIDEO OUT jack) or SVIDEO connection.
Rear of this unit
(DVD
exclusive out
connection)
Pr
R
Pb
L
Y
Basic connection
(AV)
1
Connect the VIDEO jack on this unit's DVD/VCR
OUT to the video in jack on the TV using the video
cable.
2
Connect the Left and Right AUDIO jacks of this
unit's DVD/VCR OUT to the audio left/right in jacks
on the TV using the audio cables.
Basic connection
(RF)
1
Connect the antenna cable from your indoor/ outdoor antenna to AERIAL jack on the rear panel of
this unit.
2
Connect the supplied RF antenna cable from the
RF.OUT jack on the rear panel of this unit to your
television's Antenna Input.
Rear of TV
AERIAL
VIDEO
INPUT
S-VIDEO INPUT
COMPONENT/PROGRESSIVE SCAN
VIDEO INPUT
Pr
Pb
Y
AUDIO INPUT
L
R
Component Video (Color Stream ) connection
(for DVD)
1
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the unit to the corresponding
in jacks on the TV using an Y Pb Pr cable.
2
Connect the Left and Right AUDIO OUT jacks of
the unit to the audio left/right in jacks on the TV
using the audio cables.
S-Video connection (for DVD)
Connect the S-VIDEO OUT jack on this unit to the
S-Video in jack on the TV using the S-Video cable.
1
2
Connect the Left and Right AUDIO OUT jacks of
this unit to the audio left/right in jacks on the TV
using the audio cables.
Progressive
Scan
(ColorStream Pro) connection
If your television is a high-definition or "digital ready"
television, you may take advantage of the DVD
Player's progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
1
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the unit to the corresponding
in jacks on the TV using an Y Pb Pr cable.
2
Connect the Left and Right AUDIO OUT jacks of
the unit to the audio left/right in jacks on the TV
using the audio cables.
Pr
R
Pb
L
Y
Rear of this unit
(Basic connection)
Note
If the TV has an S-Video input, connect this unit with
the S-video cable. When using an S-video cable, do not
connect the yellow video cable.
9
PREATION
Connections
Connecting
to
(Continued)
Optional Equipment
Notes
--
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II /Pro Logic
Connect the Left and
Right AUDIO OUT jacks on this
unit to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
channel
1
Connect this unit's DIGITAL AUDIO OUT
(COAXIAL or OPTICAL) to
jack on your amplifier. Use
optical) audio cable.
jack
corresponding in
digital (coaxial or
the
a
You will need to activate this unit's
2 (See "Digital
Digital
A
Audio
Output"
on
digital output.
18).
page
Multi-channel sound
digital multi-channel
quality. For this
connection
provides
the best
sound
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
will be in DTS
selected.
Rear of this unit
Pr
R
Pb
L
Y
2 channel
stereo
analog
or
Dolby
Pro
Logic
II / Pro
Logic
connection
Digital
Both DVD and
multi-channel
DVD exclusive out
VCR out
connection
(DVD exclusive
out connecttion)
L
R
AUDIO INPUT
Amplifier (Receiver)
10
COAXIAL
DIGITAL INPUT
OPTICAL
DIGITAL INPUT
If the audio format of the
the
capabilities of
produce a strong,
--
To
see
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the
On-Screen
Display,
press AUDIO.
Before
Tuning
Operation
in
a
VCR part
-
video channel
on
your TV
6
is already used by another TV station, or if
picture is distorted, you can change the
transmitter channel of your VCR. Stages 5
will show you how to change the output
frequency of your VCR.
Your TV receives
recorder
signals
8
~
RF
channel number
7
on
2
Insert
your VCR.
video tape into your VCR
the remote control.
on
which you wish to
watch video's.
Don't worry if you don't have a video-tape to play at
this stage! If you switch your VCR on and continue
stages 3 4, instead of seeing video playback tune
~
your TV until you
3
see a
bright
blue
Tune this channel until the video
screen.
picture
is
a
TV channel number
POWER
appears.
Store this channel
pre-recorded
and press PLAY on
Select a TV channel number
Select
sharp
on
which you wish to
watch video's.
on
the front of your VCR when
you have finished.
Tune this channel so that
your TV.
a
to select another video channel.
can
Press
that you have correctly installed your
described earlier in this book.
on
or 4
also set it to "OFF" if there is any interferwhen your TV is connected to the VCR with a
RCA lead.
sure
on
Press PROG. 3
ence
8
Press POWER to turn
i
You may select any channel number between 22
and 68.
You
called AV.
Turn
36
from the video
cables then your TV should already have a
dedicated video channel built into it, usually
as
CHANNEL
PSET
R
your TV
and tune it in so that you may watch video
tapes. If you have used AUDIO and VIDEO
a
screen.
the
like another TV station. You
(VCR)
have to select
Make
the front of your VCR for
The
The output frequency of this video recorder
(VCR) is set at UHF channel 36. If channel 36
VCR
or 4 on
than 4 seconds.
RF36 will appear in the display window.
following picture will be displayed on the TV
Notes
1
Press PROG. 3
more
on
a
bright
blue
screen
your TV.
Note
Make
sure
VCR and
that you have correctly installed your
successfully tuned in a dedicated video
on your TV. If you do not tune in a
dedicated video channel on your TV you will be
channel
unable to view and record video
tapes!
and the sound is clear.
If you have used a AUDIO and VIDEO cables you
will not have to tune your TV, simply select the AV
channel. The AV channel is already pre-tuned for
optimum
video
playback
on
your TV.
Using your VCR for the very first time
Following picture
will
display
on
the TV
screen
Store this channel
when you have just connected your video recorder
for the very first time.
you do not know how to do this.
To make
tuning
3 to 4
shown "ACMS"
4 You
on your TV.
will need to look at the TV instruction book if
out
stages
5 Only carry playback
clear video
Select
a
5
as
8 if you cannot obtain
described in stages 1
4.
~
TV channel number
as
TV stations,
please follow stages
(see p.13).
~
on
which you wish to
watch video's.
Make
sure
POWER
be
that your VCR is in
the remote control
on
displayed).
standby pressing
(only the clock will
ACMS
Pr-12
ACMS
OKi
11
PREATION
Before
Setting
Operation
the clock
-
VCR part
To set the colour system
Manually
The clock in your VCR controls time and date
settings for your VCR.
1
Press i.
1
Press 1
or
2 to select TIME DATE.
Press OK.
:.
-
-
--
--
--
2
The main
3
Press 1
or
Press 3
or 4
menu
---
.
will appear
on
the TV
screen.
2 to select the SYSTEM and press OK.
4 system used.
HHMMDDMMYY
--
Press i.
to select
according
to the COLOUR
12
TIME
DATE
2
i
Use the numbered buttons
to alter the
the remote control
on
HOURS, MINUTES, DAY, MONTH and
YEAR.
REC
fOS
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The
day
of the week will appear
automatically
ON
OFF
AUTO
PAL
MESECAM
SYSE
TEM
AB
C
OSD
VCR
Dr.
SYSTEM
i
OPR
when
Press 1
5 Press
you enter the year.
or
2 to select the RF AUDIO.
3 or 4 to
select
according
to the RF AUDIO
used.
HHMMDDMMYY
8
:.
0010103WED
.
12
TIME
DATE
i
REC
fOS
ON
OFF
3
4
If you make a mistake press 1
correct details.
Press i.
12
or
RF I/I
RF B/G
RF D/K
SYSE
TEM
AB
C
OSD
VCR
Dr.
SYSTEM
i
OPR
2 and enter the
6
Press i to
remove
the
menus
from the TV
screen.
Before
How to
Operation
VCR part
-
the main
using
Tuning
menu
This VCR
menus
The
can easily be programmed by using
displayed on screen.
menus are
the
controlled from the Remote
Control Handset.
1
2
If the TV broadcast
by pressing
Press i button.
menu
will appear
on
the TV
screen.
Automatically
is weak your VCR may
signal
not detect the necessary information and will not
be able to store them correctly. To overcome this
problem please
Switch on your TV set and video recorder
the POWER button.
The main
in TV Stations
tion
1
2
on
turn to the MANUAL TUNING
sec-
page 14.
Press POWER to turn
your VCR.
on
Press i button.
The main
Press 1
will appear on the TV
2 to select the ACMS.
menu
or
screen.
Press OK.
AB
C
12
Pr-12
PSET
R
REC
ACMS
TIME
DATE
SYS-
VCR
Dr.
OSD
TEM
fOSD
ON
OFF
REC
REC
OKi
OPR
12
Timer
recording setting (see p. 22).
PR SET Manual tuning setting (see p. 14).
ACMS ACMS (Automatic Channel Memory
System) (see p. 13).
TIME DATE Date & clock setting (see p. 12).
SYSTEM To set the Colour TV System
(see p. 12).
-
Pr-12
PSET
R
REC
ACMS
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
Pr-12
ACMS
fOSD
ON
OFF
-
OPR
OKi
-
-
O
-
RF AUDIO
-
To select the channel of audio output
according to your TV type ("I/I" for
ACMS
Pr-12
OKi
ACMS
PAL I/I TV, "B/G" for PAL B/G TV,
"D/K" for PAL D/K
O
ABC OSD
-
To
change
the
TV) (see p. 12).
language setting for
OSD.
You
O
O
O
select the
language among
English, Russian, Deutsch, Francais,
Polski, Hungarian and Czech.
Dr. To check a problem with your VCR
(see p. 30).
F.OSD ON/OFF To display the operational
mode of your VCR (see p. 30).
OPR To improve the playback picture
(see p. 20).
can
3
Press OK
again
to start the automatic
tuning
process.
-
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
-
S
E
Pr-12
i
ACMS
-
3
Press 1 and 2 to select the desired
4
Press "i" to return to
Press OK and press 3
a
or 4
TV
menu.
to select.
The TV STATION TABLE will appear when
4 is complete.
Press i to
save
your
tuning
settings.
picture.
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
PR-07
PR-08
MOVE
:
DELETE
:
,
OKi
13
PREATION
Before
Tuning
In certain
Operation
VCR part
-
in TV Stations
areas
4 Searching
Press
Manually
of the country broadcast
will
stop when it locates
a
station.
2 to select MFT.
signals
Press 3
or 4
to
adjust.
may be too weak for your VCR's automatic tuning
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations
manually
1
PR
CH
MFT
09
C10
00
in order for your VCR to store them.
CHANNEL/CABLE
Press i.
:
PSET
R
The main
Press 1
STATION
will appear on the TV
2 to select the PR SET.
menu
or
AV
i
screen.
Press 2 to select STATION
5 your
Press OK.
that you may
so
name
TV station.
Press OK.
PR
C09
12
REC
PSET
R
Pr-12
ACMS
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
OKi
OPR
PR
01
MFT
00
STATION
-
PSET
R
fOSD
ON
OFF
CH
C10
CH
MFT
STATION
C02
00
PR-01
PSET
R
6
Press 3
new
or 4
station
Press 1
or
OK i
to select letters and numbers for the
name.
2 to
move
back and forth between
characters.
CHANNEL/CABLE
:
AV
PSET
R
2
Press OK.
i
Press i.
The station table will appear.
Press 3 or 4 to select the programme number that
you want to tune
(for example,
PR
PR
C09
CH
MFT
STATION
C10
00
ABC
09).
PSET
R
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
7
PR-07
:
DELETE
:
new
TV station has
If you wish to
stages 1 7.
OKi
,
Press i, confirm the station
Press i again.
Your
PR-08
MOVE
OK i
now
manually
placement.
been tuned into your VCR.
tune other stations
-
3
Press OK.
09
Press AV to select C
(Standard stations)
or
S
(Cable stations):
C02
-
C69, S01
13
S41.
14
15
to tune with the numbered buttons or use 3 or 4
required
station.
PR
CH
09
C--
MFT
STATION
--
----
CHANNEL/CABLE
P
R SET
14
11
12
-
Enter the channel number of station that you want
to find the
10
:
AV
i
16
PSET
R
C10
ABC
00
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
--
--
-----
-----
MOVE
:
DELETE
:
,
OKi
repeat
Before
Operation
Changing
-
VCR part
the order of TV Stations
Deleting
After tuning TV stations into your VCR you may
wish to change the order in which they are stored
without having to retune them. The instructions given
on this page will show you how you can simply move
them into your desired order.
1
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
TV Stations
After tuning TV stations into your VCR you may
wish to delete a station.
The instructions given on this page will show you
how easily delete any unwanted TV stations.
1
screen.
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
AB
C
12
PSET
R
REC
AB
C
VCR
OSD
Dr.
12
PSET
R
REC
Pr-12
ACMS
TIME
DATE
SYSTEM
PSET
R
fOSD
ON
OFF
SYS-
VCR
Dr.
OSD
TEM
PSET
R
OKi
OPR
PR
PR
TIME
DATE
OKi
OPR
01
Pr-12
ACMS
fOSD
ON
OFF
CH
MFT
STATION
C02
00
PR-01
01
CH
MFT
STATION
C02
00
PR-01
CHANNEL/CABLE
CHANNEL/CABLE
:
AV
PSET
R
2
Press i.
Press 3
or 4 to select the programme number
you want to delete. (for example, PR 03)
01
C02
00
PR-01
02
C03
00
PR-02
03
C05
00
PR-03
C06
00
PR-04
C02
00
PR-01
02
C03
00
PR-02
05
C04
00
PR-05
03
C05
00
PR-03
06
C07
00
PR-06
04
C06
00
PR-04
07
C08
00
05
C04
00
PR-05
08
C09
00
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PSET
R
PR-07
PR-08
MOVE
:
DELETE
:
OKi
,
PR-08
MOVE
:
DELETE
:
OKi
,
C02
00
02
C03
00
PR-01
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
00
PR-05
06
C06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
3
Press 1.
After a short while, the selected station will be
deleted.
OKi
01
C02
00
02
C03
00
PR-02
03
C05
C06
00
PR-04
00
PR-05
C04
00
PR-03
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
C02
00
PR-01
02
C03
00
03
00
04
C05
C06
00
PR-02
PR-03
PR-04
05
06
C04
C07
00
00
PR-05
PR-06
07
C08
00
PR-07
08
C09
00
DELETE
P SET
R
4
PR-01
05
01
PR-08
MOVE
to select the programme number
you want to move to (for example, PR 05).
or 4
PSET
R
4
Press i.
Press 3
01
04
AV
i
04
PSET
R
3
2
to select the programme number
you want to move (for example, PR 03).
Press 2.
Press 3
:
PSET
R
i
or 4
01
PREATION
screen.
,
OKi
Press i to remove the menus from the TV screen.
If you wish to delete other TV stations repeat
stages
1
-
3.
OKi
Press OK.
The selected programme will be moved to the new
programme number.
If you wish to move other TV stations repeat stages 1 4.
Press i to remove the menus from the TV screen.
:
:
01
C02
00
PR-01
02
C03
C06
00
03
00
PR-02
PR-03
04
C04
00
PR-04
05
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
08
MOVE:
PSET
R
DELETE
:
,
OKi
-
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
04
00
PR-02
PR-03
PR-04
05
C04
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
PR-07
PR-08
MOVE
:
DELETE
:
,
How to
selecting
Stored TV stations:
Stored TV stations can be selected in either of two ways.
Press PROG. 3 or 4 to select different stations that are
tuned into your VCR.
You may also directly select stations using the
numbered buttons on the remote control.
OKi
15
Before
General
This manual
Operation
DVD
-
part
Temporary
Explanation
the basic instructions for
gives
operating
require specific operation or allow
only limited operation during playback. When this
occurs, the symbol
appears on the TV screen,
that
the
indicating
operation is not permitted by this unit
is not available
or
On-Screen
The
TV
general playback
screen.
1
2
3
Press 3
or
can
be
highlighted.
the
change
The number buttons
(e.g.,
Repeat
A-B
title
can
setting
of
For
Video CDs
(non-PBC
only)
Video CDs
only)
Repeat Off
play
from this
prohibited
or
point
not available
provide
all of the below On-
If no button is pressed
Display disappears.
for 10 seconds, the On-Screen
setting
functions,
some
press SELECT/ENTER to execute the
Some discs may not
Screen Display.
item.
an
be also be used for
number).
(non-PBC
Notes
during playback.
Press 1
numbers
AB
Action
4 to select an item.
2 to
Repeat
All Tracks
Resume
The selected item will be
or
ALL
displayed on the
changed on the menu.
display operation
Press DISPLAY
Track
status can be
Some items
On-screen
Repeat
OFF
Display
Title
Repeat Chapter
CHAPT
TRACK
the disc.
on
Repeat
TITLE
this unit. Some DVDs
Feedback Field Icons
setting.
DVD
Items
Function (Press 3/4 to select desired item)
Shows the current title number and total number of
Title Number
1/3
Chapter
1 /12
Time search
0:20:09
Audio
language
Digital Audio
Output mode
1 ENG
and
D
5.1 CH
OFF
1/1
chapters,
and
Shows the
to the desired
chapter number.
elapsed playing time, and
point by the elapsed time directly.
searches the
Shows the current audio soundtrack
encoding method, and
changes the setting.
channel
language,
number, and
language,
and
1/2,or
Numbers
,
SELECT/ENTER
Numbers
,
SELECT/ENTER
1/2,or
AUDIO
1/2,or
and
SUBTITLE
changes the setting.
angles,
1/2,or
Numbers, SELECT/ENTER
number and total number of
chapter
skips
angle number and total
changes the angle number.
Shows the current sound
NORM.
mode,
number of
1/2,or
ANGLE
and
1/2
changes the setting.
VCD1.1
Items
Track Number
1/4
Time
Audio Channel
16
to the desired title number.
Shows the current subtitles
ABC
Sound
Sound
skips
Shows the current
Angle
VCD2.0
and
Shows the current
Number
Subtitle language
titles,
Selection Method
0:20:09
Function (Press 3/4 to select desired item)
Selection Method
Shows the current track
1 /2,or
Numeric, SELECT/ENTER
and PBC On
Shows the
mode,
and
number, total number of tracks
skip to the desired track number.
elapsed playing
Shows the audio
STER.
NORM.
channel,
changes the audio channel.
Shows the current sound
changes the setting.
time
(Display only)
and
--
1
/2,or
AUDIO
mode,
and
1/2
Before
Initial
You
DVD
-
part
Picture
Settings
set your own Personal Preferences on this unit.
can
Initial
1
Operation
General
Settings
DVD
Operation
nected.
Displays
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Code
bars
Scan
style
picture are
is
back in that
played
off).
style (Both
sides of the
cut
16:9 Wide: Select when a 16:9 wide TV is connected.
Chinese
Scan
Progressive
Audio
Polish
Output
Hungarian
Other------------
Others
Disc Audio
4:3 Letterbox
Disc Subtitle
4:3 Panscan
Disc Menu
16:9 Wide
Rating
Country
Press 3/4 to select the desired item.
TV
well
as
as
setting for the
alternate setting(s).
While the desired item is
Language
Scan
Progressive
Digital
selected, press 2, then
3 3/4 select the desired setting.
Press SELECT/ENTER
confirm your
4 selection.
Code
Aspect
Menu
will show the current
selected item,
masking
Italian
Language
Digital
with
connected. The video material formatted in the Pan &
Spanish
Aspect
Menu
screen
images
picture.
4:3 Panscan: Select when a conventional TV set is
appears.
Disc Audio
Country
2 The
theatrical
above and below the
menu
TV
Aspect
4:3 Letterbox: Select when a standard 4:3 TV is con-
Press SETUP.
The setup
TV
Audio
Output
Others
to
to
Some items
Press
5 setup
require
Progressive
additional steps.
SETUP, RETURN
menu.
Language
Disc
Language
Select
language
a
Off.
DVD
for the disc's Menu, Audio, and
Subtitle.
original language set for the disc is selected.
language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 35. If you enter the wrong language
Original
Other
:
:
DVD
Progressive
provides the highest quality
pictures with less flickering.
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting this unit to
a standard (analog) television, set Progressive Scan to
PLAY to exit the
or
Scan
Scan Video
The
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.
To select another
Disc Audio
Off
Disc Subtitle
On
Disc Menu
code, press CLEAR.
Rating
Country
TV
Original
Disc Audio
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Code
Scan
Audio
Output
Others
Chinese
Scan
Audio
Digital
Progressive
Digital
Italian
Language
Progressive
Language
Spanish
Aspect
Menu
Code
Aspect
Menu
Output
Polish
Hungarian
Other------------
Caution
Others
Once the
Menu
Language
Select
a
you
see
language
for the setup
menu.
when you press SETUP.
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
Country
TV
setting for progressive scan output is entered,
image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
an
Code
Aspect
Menu
Language
Progressive
Digital
Scan
Audio
Output
Italian
This is the
menu
to On in error,
1)
you must reset the unit.
Remove any disc from the unit and close the disc
tray. See that "NO dISC" is displayed on the display
window.
2)
Press STOP and hold it for five seconds before
releasing
it. The video
standard
setting
ble
on a
and
conventional
output will be restored
picture will once again
analog TV or monitor.
a
to the
be visi-
Others
17
PREATION
Before
Operation
DVD
-
part
Sound
Digital
Others
Audio
Output
Each DVD disc has
The DRC, Vocal, PBC and Auto
of audio output
variety
options.
player's Digital Audio Output according to the
Set the
a
type of audio system you
use.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
Press 3/4 to select the desired item and press
setting of the selected item is
changed
between On and Off.
Disc Audio
ment with a
Disc Menu
Dolby Digital decoder).
DTS decoder,
MPEG decoder.
or
on
the
Country
TV
a
2-channel
Off
Code
Aspect
Menu
decoder
Language
Progressive
digital
Scan
Audio
Output
Others
This unit outputs sounds in the PCM
2ch format when you play a DVD video disc recorded
stereo
Play
Rating
Digital
PCM: select when connected to
PBC On
Auto
Dolby Digital
a
DRC On
Vocal On
Disc Subtitle
Stream/PCM: Select "Stream/PCM" if you connected
this unit's DIGITAL OUT jack to an amplifier or other
with
be
can
SELECT/ENTER. The
if you connected this unit's DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equip-
equipment
Play settings
changed.
amplifier.
Dolby Digital, MPEG1,
MPEG2
or
recording
sys-
Dynamic Range
Control
(DRC)
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
tem.
Disc Audio
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
PCM
/PCM
Rating
Country
TV
Code
Aspect
Menu
Progressive
Digital
Sample Freq.
48 KHz
Language
96KHz
Scan
Audio
Output
thanks to
possible,
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
quietest ones). Then, you may
losing clarity
at a lower volume without
listen to
a
movie
of sound. Set
DRC to On for this effect.
Others
Vocal
Sample Frequency
Set Vocal to On
To
only
DVD is
The karaoke channels
Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
change
the
playing.
mix into
a
when
a
multi-channel karaoke
on
the disc will
normal stereo sound.
PBC
Set
Playback Control (PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On or Off.
played according to the PBC.
played the same way as Audio
CDs.
Auto
You
Play
can
ically
set up the DVD
starts
If Auto
Play
search
a
play
DVD
playing
Player
so a
DVD disc automat-
whenever the DVD is inserted.
mode is set to On, this DVD player will
playback time is long most and then
title that
back the title
automatically.
On: Auto
Off:
Play function is activated.
Auto Play function is not activated.
Note
The Auto
18
Play
function may not work for
some
DVDs.
Before
Operation
DVD
-
part
Parental Control
Rating
DVD
Enter the code of
DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain
Code
Country
scenes on
the disc. These
scenes are
whose standards
were
are
PREATION
Code Set
Disc Subtitle
AE
Disc Menu
Rating
Country
The Parental Control feature allows
country-dependent.
country/area
Disc Audio
rated
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
a
used to rate the DVD video disc, referring to the list
(See "Country Code List", page 36.).
TV
Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Code
Aspect
Language
Progressive
Scan
Audio
Digital
Output
Others
Disc Audio
8
Disc Subtitle
7
Disc Menu
6
Rating
TV
Code
4
Aspect
Menu
2
Scan
Audio
1
Output
Unlock
Change
Others
1
Select
2
While
3
When you have not entered a password yet.
Enter a 4-digit password using the numbered but-
3
"Rating"
and
on
the
Setup
menu
using
the
buttons.
4
"Rating"
tons to create a
is
the
3
Language
Progressive
Digital
Select
1
5
Country
selected,
press 2.
2
3
4
5
6
While
using
Code is
3 of
step
on
selected, press 2.
"Rating"
Select the first character
Shift the
the 3/4 buttons
menu.
Country
Follow
cursor
on
left.
using
the 3/4 buttons.
1/2 buttons and select
using
the second character
using
3/4 buttons.
Press SELECT/ENTER to confirm your country
selection, then press SETUP to exit the
code
menu.
personal 4-digit security password,
then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify.
When you have already entered a password;
the code is
Enter
below
a
Code
Country
setup
4-digit password using the numbered butpersonal 4-digit security pass-
Note
Confirmation of the
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
).
tons to confirm the
4
word, then press SELECT/ENTER.
Changing
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
1
Follow
2
Enter the old code, then press SELECT/ENTER.
Select Change using the 3/4 buttons then press
Select
a
rating from 1
(1) has the
tons. One
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
Ratings
played. Higher
unless
an
rated
alternative
scenes
scene
is available
The alternative must have the
lower
one.
If
no
will not be
same
played
on
rating
the disc.
or a
suitable alternative is found,
play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
Press SELECT/ENTER to confirm your
5 selection,
then press SETUP to exit the
code
1-2 as shown above to the left
(Rating).
Enter the
new
4-digit code,
then press
SELECT/ENTER.
5
exactly the same code a second
fy by pressing SELECT/ENTER.
6
Press SETUP to exit the
Enter
If you
If you
forget
forget
your
your
time and veri-
menu.
4-digit
password,
code
to clear the current pass-
word, follow the procedure below.
1
Press SETUP to
2
Use the Number buttons to enter the
display
the setup
menu.
6-digit
number
"210499".
rating
menu.
Steps
4-digit
SELECT/ENTER.
4
1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be
3
least
has the most
Eight (8)
using the 3/4 butplayback restrictions.
playback restrictions.
to 8
the
The
3
4-digit password is cleared.
Enter
a new
code
as
shown above to the left
(Rating).
19
with
Operation
Playing
You will
a
only
tape
playback, Shuttle :
or still picture press F or G.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
Slow motion
tape
5 During playing back
be able to load and
eject video
cassettes
when your VCR is plugged into the mains.
Your VCR may also playback recordings from NTSC
To switch off the slow motion and shuttle, press the
desired function.
tapes (on PAL TV).
better
Getting
a
When
cassette is inserted and
a
picture
During
playback started, the
function works to get the best
automatic
tracking
possible picture automatically. If the quality of the
recording is poor, repeatedly press 3 or 4 on the
remote control to manually adjust the tracking until
any distortions have been removed. Press numbered
0 on the remote control to switch automatic tracking
back
on
appear
tape.
VCR
that you have correctly connected your
described earlier in this book.
sure
as
your TV.
Press POWER to turn
Turn
can
or
in the
seen
picture,
reduce
playback.
Press EJECT.
If the end of the
tape is reached, your VCR will stop
the tape.
playback automatically, rewind, stop, eject
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
normal
on
be
E.
Press STOP to end
6
CM
1
If distortions
them with D
again.
Make
slow motion and shuttle, the noise bars may
on the picture according to the status of
playback.
your VCR.
Insert the video cassette into your VCR.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
The video cassette should have the window side
material).
Repeatedly
facing
up and the
on
arrow
facing
away from you.
press CM SKIP to
skip:
1 Press 30 seconds
2 Press 60 seconds
2
Press PLAY to start
playing
your tape.
video cassette which has had its
3 Press 90 seconds
If you load a
record protection tab removed, playback of the
cassette will start automatically.
4 Press 120 seconds
5 Press 150 seconds
6 Press 180 seconds
AUTO TRACKING
Your VCR will
give
3
the best
automatically adjust
picture quality.
Press PAUSE/STEP to still
the
tracking
the
tape frame by frame.
If you press FORWARD, the picture will be slowed
can
be
paused
1
Press i.
2
Press 1
3
Press OK.
.
Still
picture quality
pressing 3 or 4.
4
can
be
Press PLAY to continue
improved slightly by
playing
Picture
Response)
tape.
playback.
for up to 5 minutes. After 5
minutes your VCR will stop the tape to prevent
damaging the tape or your VCR
Tapes
(Optimum
automatically improves playback picture
quality by adjusting your VCR to the condition of the
a
down at about 1/19 times the normal
OPR
This feature
picture.
repeatedly to advance
Press PAUSE/STEP
to
or
2 to select OPR.
your tape.
Picture search:
back press either FORWARD or
BACKWARD and this will enable you to rapidly
wind the tape (7 times normal playback) and see
During playing
where you
are on
FORWARD
played
or
ON
OFF
the tape.
Logic search:
During fast forwarding
rewinding press and hold
picture will be
normal playback speed.
4
or
3
or 4
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
OPR
i
OPR
repeatedly
to select:
OFF, SOFT
SHARP.
playing
5
20
Press
12
12
MS
Please note you may
BACKWARD the
back at 7 times
OFF
SOFT
SHARP
R
f
a
only
tape.
Press i return to
screen.
set OPR when
or
Operation
with
Instant Timer
tape
Press LP if you wish to record in
Recording (ITR)
Your VCR allows you to make
variety of simple methods:
recordings using
SP will
a
Recording (ITR) start recording
for
a set period of time or until the
immediately
Your VCR
incorporates Long Play (LP)
time
record up to 180 minutes using Standard Play (SP);
using LP you will be able to record up to 360 minutes.
Please note there will be
quality
when
as
SP.
Press REC/ITR to start
6 RECORD
which
enables you to record up to twice the amount of
time on a video cassette. For example an E-180 will
sound
produce improved picture and sound quality,
provide twice as much recording
recording.
will appear on the TV screen.
Press REC/ITR several times. Each successive
out.
runs
or
however LP will
Instant Timer
video cassette
Long Play
5 Standard Play.
a
using
slight
loss in
picture
and
LP.
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
7
Press PAUSE/STEP to avoid
recording
unwanted
scenes.
Press PAUSE/STEP to continue
recording.
If you press PAUSE/STEP during ITR, this unit will
enter the record pause mode and ITR is cancelled.
be paused for up to 5 minutes; RECP
displayed when a tape is paused. After 5
minutes your VCR will stop recording to prevent
damaging the tape or your VCR.
Tapes
can
will be
1
Make
VCR
that you have correctly connected your
described earlier in this book.
sure
as
Press POWER to turn
Insert
2 VCR.
a
on
your VCR.
video cassette with
Press STOP twice within 5 seconds to end
protection
tab into your
8 recording.
Press EJECT.
EJECT will appear
The video cassette should have the window side
facing
3
up and the
arrow
facing
away from you.
3 or 4 to select the programme number
wish
to record.
you
You may also directly select programme number
using the numbered buttons on the remote control.
Press
display
AV 1 for
L/R
on
(VCR
the
IN
rear
AV1)/
of your
unit.
AV 2 for
terminals
recording
on
from AUDIO 2
(L/R)/
for
a
few
on a tape (this can
happen quite easily by accident!) remove the
protection tab on the back edge of the video cassette.
It is possible to record on a video cassette with the
record protection tab removed by covering the hole
recording from AUDIO
VIDEO (VCR IN AV1) terminals
IN
screen
Notes
with self adhesive
wish to record
the TV
If you do not wish to record
directly from the AUDIO L/R
AV1)/ VIDEO (VCR IN AV1) or AUDIO 2
(L/R)/ VIDEO 2 terminals repeatedly press AV until
the socket you wish to record from is displayed.
If
you
4 (VCR
on
seconds.
tape.
Remember you can record one programme while
watching another by starting your instant recording,
press TV/VCR to appear TV indicator in the
window and then selecting a different channel
on
your TV.
VIDEO 2
the front of your unit.
21
OPERATION
with
Operation
tape
recording using On Screen
Display
Timer
6
You may set up to seven timer record events within
one month of the current date.
Press the numbered buttons to enter the recording
start and end times of the programme that you wish
to record.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
You may also select the the start and end times by
pressing
Note
or 4.
3
Before setting the timer make sure that you have set
the VCR clock correctly and you know which stations
you have tuned TV stations on your VCR.
PR
PR-01
video cassette with
1
Insert a
protection tab into your
VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
2
Press i.
Press 1 or 2 to select REC.
Press OK.
12
REC
P
SET
R
Pr-12
ACMS
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
fOSD
ON
OFF
3
DATE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
SP
SP
--
--
--
--
--
--
--
--
--
--
--
--
--
DELETE:
,
DATE
PR
SP
PR-01
SP
OK i
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
--
-~
--
-~
::
--
-~
::
--
-~
-~
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
speed
DATE
TIME
16
1900
::
2000
SP
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
i
Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1
9, press 0 first, then the
channel number; for example Stations 3 03. You
may also select Channels by pressing 3 or 4.
Once selected press 2.
If you wish to record from AUDIO L/R (VCR IN AV1)/
VIDEO (VCR IN AV1) or AUDIO 2 (L/R)/ VIDEO 2
from the back or on the front of your unit, press AV to
select for correct display (AV1 or AV2).
-
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
Press POWER twice within 5 seconds to end
SP
--
-~
9
SP
--
::
--
SP
--
::
--
SP
--
--
Check that the timer event details are correct.
Press i twice.
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your VCR Standby.
will appear in the display window while your
VCR waits to make the recording. To watch a DVD
during timer recording standby mode, press
POWER and DVD to switch to DVD mode.
SP
--
-~
::
8
SP
--
::
-~
--
i
SP
--
::
--
::
LP).
SP
Press 1 to delete the event.
--
--
SP
replace.
4
or
Press OK to start setting the timer record event.
If all timer record events are full press 3 or 4 to
select the event that you wish to remove and
PR
SP
~
--
REC
OKi
OPR
--
::
SP
::
--
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program.
TIME
--
19002000
::
--
Press 2 to select the recording speed.
Press 3 or 4 to select the desired tape
(SP, IP,
--
TIME
16
i
7
PR
DATE
--
recording.
-
PR
PR-01
DATE
change.
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
Press 1 to delete the event...or
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3 or
4 to enter the correct information.
SP
SP
SP
SP
SP
SP
i
5
Press the numbered buttons to enter the date of
the programme.
If you press OK before entering the date you may
select one of the following automated recording
features. Press 1 or 2 to select, then press OK to
confirm.
DLY To record every day (except Saturday and
Sunday) at the same time.
SU
SA To record at the same time every week.
~
PR
DATE
TIME
--
PR-0116---
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
::
SP
DLYSUMOTUWETHFRSA
--
--
--
--
-~
--
OK i
22
Notes
If at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press 3
or 4 to select the event that you wish to delete or
If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme
will always be given priority.
Example:
Programme
1 is
programmed
to start at 16:00 and end
Programme
2 is
programmed
to start at 16:30 and end
at 17:00.
at 17:30.
(In
but
this case, Programme 1 will be recorded in its entirety,
only the last 30 minutes of Programme 2 will be
recorded.)
Operation
Playing
with DVD and Video CD
DVD and Video CD
a
Playback Setup
Turn
on
DVD
VCD2.0
the TV and select the video
nected to the DVD
General Features
Note
VCD1.1
input
source con-
player.
features may also be available
Audio system: Turn on the audio system
and select the input source connected to the
DVD
1
Moving
player.
Press OPEN/CLOSE to open the disc
Unless stated otherwise, all operations
described use the remote control. Some
2 facing
tray, with the label
a
Press OPEN/CLOSE to close the
3 READING
starts
appears
automatically.
The
a menu screen
is
may be displayed first after
Video CD which contains a menu.
or
loading
a
DVD
Use the 1 2
you want to
3
4
buttons to select the
title/chapter
view, then press SELECT/ENTER to start
playback.
Press TITLE
or
DISC MENU to return to the
than
more
one
title, you
to
can move
follows:
as
num-
to another CHAPTER/TRACK
a
title
on a
more
1/3
1 /12
VCD1.1
disc has
displayed
menu screen
DVD
disc has
DVD
When
appear
instead.
If
a
another title
Moving
tray.
might
DVD
Press DISPLAY, then press the appropriate
(0-9) to select a title number.
the TV screen, and playback
If playback does not start,
menu
menu.
bered button
sure
on
press PLAY.
In some cases, the disc
to another TITLE
Setup
1/3
up.
double-sided DVD is inserted, make
the side you want to play is facing down.
When
the
tray.
When
Load your chosen disc in the
on
disc has
than
chapter/track
as
Press .
or
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
>
briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
menu
screen.
Note
For
VCD2.0
Use the number buttons to select the track you want
two-digit numbers, press
(0-9) in rapid succession.
the numbered buttons
to view.
Press RETURN to return to the
Menu
setting
menu screen.
and the exact
operating procedures
depending on the disc.
the menu may differ
Follow the instructions on the each
using
for
menu screen.
You also may set PBC to Off under setup. See page
18.
Notes
--
Rating settings (not authorized),
--
"Parental Control",
DVDs may have a
Your
player
will not
different from your
player is 2 (two).
--
1 Press . or >
The
player
VCD2.0
DVD
during
VCD1.1
pause.
will enter SLOW mode.
2 Use the . or > to select the
required speed:
1/16, t 1/8, t 1/4 or t 1/2 (backward),
T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
or
t
T 1/16,
If Parental Control is set and the disc is not within the
the
4-digit
code must
be entered and/or the disc must be authorized
--
Slow Motion
To watch
a
DVD
(see
page 19).
region code.
on
Note
Slow motion
playback
in
reverse
is not
applicable
for
Video CD.
play discs that have a region code
player. The region code for this
during
timer
recording standby
mode, press POWER and DVD to switch to DVD
mode.
23
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
Frame-by-frame playback
VCD1.1
1 Press PAUSE/STEP
The
player
Video CDs
(continued)
will
now
-
Track/All/Off
Repeat
1 To repeat the track currently
The Repeat Track icon appears
press REPEAT.
playing,
on
the TV
screen.
repeat the disc currently playing, press REPEAT
2 To
a
second time.
during playback.
The
go into PAUSE mode.
2 You can advance the
picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the remote
Repeat
All icon appears
the TV
on
screen.
Repeat mode, press REPEAT a third time.
Repeat Off icon appears on the TV screen.
3 To exit
The
control.
Note
Search
VCD2.0
DVD
On
VCD1.1
setup
1 Press and hold . or > for about two seconds
during playback.
The
player
will
go into SEARCH mode.
now
a
Repeat
A-B
A*
AB
2 Press and hold . or >
repeatedly to select the
required speed: mX2, mX4, mX16, mX100
(backward) or MX2, MX4, MX16, MX100
(forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
3 To exit SEARCH
mode, press PLAY.
VCD2.0
Karaoke DVD
a
VCD1.1
OFF
sequence in
a
title:
1 Press A-B at your chosen starting
A* appears briefly on the TV screen.
2 Press A-B
point.
at your chosen end point.
the TV screen, and the repeat sequence
begins (a-b repeat appears on the player's display).
again
A B appears
briefly
on
VCD1.1
1 Press RANDOM
during playback or in stop mode.
automatically begins Random Playback and
"RANDOM" appears
2 To return to normal
"NORMAL" appears
Tips
By pressing
To repeat
VCD2.0
DVD
3 To cancel the sequence, press A-B.
Random
The unit
Video CD with PBC, you must set PBC to Off on the
menu to use the Repeat function. See page 18.
on
the TV
screen.
press RANDOM until
the TV screen.
playback,
on
Time Search
0:20:09
DVD
The Time Search function allows you to start
any chosen time on the disc.
1 Press DISPLAY
play
appears
on
during playback.
the
selects another
during Random playback, the unit
title (track) and resumes Random play-
on-screen
at
dis-
elapsed playing time of the
current disc.
2 Within 10
seconds, press 3/4 to select the Time
Search icon in the
back.
The
playing
screen.
The Time Search box shows the
>
-:--:--
on-screen
display.
The "-:--:--" appears in the Time Search box.
Notes
3 Within 10
This function
only
works with DVD Karaoke discs and
OnaVideoCDwithPBC,youmustsetPBCtoOffon
menu
seconds,
required
to use the Random function. See
use
the number buttons to enter
start time. Enter
onds from left to
video CD without PBC.
the setup
page 18.
the
right
hours, minutes, and
sec-
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
4 Within 10
seconds, press SELECT/ENTER to confirm
the start time.
Repeat
CHAPT
DVD
VCD1.1
Playback
an
TITLE
DVD Video Discs
1 To
VCD2.0
TRACK
-
ALL
OFF
3D Surround
Repeat Chapter/Title/Off
This unit
repeat the currently playing chapter, press
The
Repeat Chapter icon appears
repeat the title
second time.
The
The
on
the TV
currently playing,
Repeat Title icon appears
3 To exit
can
Repeat mode,
on
press REPEAT
produce
on
the TV
a
VCD2.0
a
VCD1.1
3D SUR
NORM.
3D Surround effect, which
playback from two
conventional stereo
five
more
speakers, instead of the
speakers normally required to listen to
multi-
channel audio from
the TV
screen.
press REPEAT
Repeat Off icon appears
screen.
a
third time.
screen.
1 Press DISPLAY
a
or
home theater system.
during playback.
2 Press 3/4 to select "NORM." or "3D SUR".
3 Press 1/2
selected.
24
DVD
simulates multi-channel audio
REPEAT.
2 To
starts from the selected time on the disc. If you enter
playback will continue from the current point.
invalid time,
repeatedly
until the desired sound is
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
(continued)
VCD1.1
Checking
during playback
or
still
playback
to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the
increases up to six times.
2 Use the 1 2
zoomed
3 4
buttons to
picture.
3 Press CLEAR to resume normal
the
the
through
playback
or
the contents of DVD Video
DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select
option. Or, use the 1/2/3/4 buttons to highlight your
selection, then press SELECT/ENTER.
magnification level
move
return to
paused image.
1 Press TITLE.
If the current title has
screen.
zoom
The
zoom
function may not work for
function may not work on
some
DVDs.
nine
can
and subtitle
multi-angle
1
DVD
VCD2.0
menu
may appear.
options,
angles, spoken language
chapters for the title.
and
start
playback
a
1 Press DISC MENU.
memorized
point. Up
to
be memorized.
can
The disc
is
menu
displayed.
2 To remove the disc menu, press DISC MENU
mark, follow these steps.
a
DVD
Disc Menu
from
again.
VCD1.1
MARKER SEARCH
points
To enter
menu, the menu will appear on the
3 To remove the title menu, press TITLE
1/9
You
a
Otherwise, the disc
2 The menu can list camera
scenes.
Marker Search
an
DVD
Title Menu
Note
The
DVD
discs: Menus
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
Angle
DVD
again.
1/1
memorize.
The Marker icon will appear
2
Repeat step
on
the TV
If the disc contains
briefly.
screen
1 to enter up to nine Marker
points
on a
disc.
To Recall
1
a
Marked Scene
disc
During
playback,
The MARKER SEARCH
menu
will appear
on
a
the
screen.
Marker
playback,
2
3
display.
the Audio
Language
DVD
1 ENG
ferent audio
scene.
Marked Scene
disc
the
D
SEARCH.
During
on
Press AUDIO
will start from the Marked
The MARKER SEARCH
angle appears
a
5.1 CH
4 To remove the MARKER SEARCH menu, press
1
Changing
num-
3 Press SELECT/ENTER.
a
camera
angles, you
change
angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
The number of the current
seconds, press 1/2 to select
ber that you want to recall.
To clear
recorded at different
to a different camera
press SEARCH.
2 Within 10
Playback
scenes
can
repeatedly during playback
language or audio track.
to hear a dif-
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(STER., LEFT or RIGHT).
VCD2.0
VCD1.1
a
dif-
ferent audio channel
press SEARCH.
menu
will appear
on
the
screen.
Press 1/2 to select the Marker number that you want
Subtitles
DVD
to erase.
Press SUBTITLE
Press CLEAR.
different subtitle
ABC
1 ENG
repeatedly during playback
languages.
to see the
The Marker number will be erased from the list.
4
Repeat steps
2 and 3 to erase additional Marker
numbers.
5
To
remove
the MARKER SEARCH menu, press
Note
If
appears, the feature is not available
on
the disc.
SEARCH.
25
OPERATION
Operation
with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
CD
MP3
The DVD
Notes
MP3/WMA
Insert
1
play
Recordings
a
files that have
The
player
can
not read an MP3 file that has a file
extension other than
disc and close the
tray.
About
CD; Audio CD menu appears on the TV
go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
screen
a
technology.
WMA(Windows
compression of
JPEG
MP3/WMA Disc
limited
Press 3/4 to select the MP3/WMA then press
1.
SELECT/ENTER.
appears on the TV screen.
to the MP3/WMA-JPEG
menu
2.
move
3.
MP3 WMA
4.
Program
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Clear All
Folder8
5.
OFF
00:00
as
Audio)
Microsoft audio
Media
Audio)
compression
offers double the audio
the MP3 format.
compatibility
with this
player
is
follows:
Sampling Frequency / only at 44.1kHz (MP3),
(WMA)
Bit rate / within 32 320kbps (MP3),
32-128 kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "Easy-
CD Creator", which creates an ISO9660 file system.
single session disc requires MP3/WMA files in the
A
first track. If there is
Press 3/4 to select
a
folder, and SELECT/ENTER.
Press 3/4 to select
a
track then press PLAY
the disc
or
6.
File
should be named
incorporate ".mp3"
e.g. "********.MP3"
the current track's elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
MP3/WMA file in the 1st
or use a new one.
names
and must
SELECT/ENTER.
Playback starts.
During playback,
no
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
3 A list of files in the folder appears.
Press TITLE to
Media
22.05-44.1 kHz
Press RETURN to
choice menu.
4
".mp3".
WMA(Window
An WMA file is
MP3 WMA
The MP3/WMA
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
MPEG1 audio
right.
on
Audio
2
Recordings
An MP3 file is audio data
MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on
can
MP3/WMA
About MP3
WMA
Player
on
or
using
or
8 letters
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
to the next page.
move
Press DISC MENU to
move
to the
previous page.
This DVD
player requires discs/recordings
to meet
certain technical standards in order to achieve
Program
CD
Program
MP3 WMA
TRACK01
TRACK02
TRACK 1.mp3
TRACK03
TRACK 2.mp3
TRACK04
TRACK 3.mp3
TRACK 6.mp3
TRACK07
TRACK 7.mp3
Clear All
TRACK08
STER.
NORM.
Audio CD
menu
0: 56: 18
Clear All
TRACK 8.mp3
00:00
1
If you
in
MP3/WMA
Customers should also note that
menu
a
file list and want to return to the Folder list,
34 to
and press SELECT/ENTER to
return to the
5
To
26
highlight
previous menu
stop playback
screen.
at any other
types
(including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
required
permission
time, press STOP.
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
grant such permission. Permission should
to
are
the
optimal
automatically
OFF
Tip
use
are
of recordable disc formats
TRACK 5.mp3
TRACK06
Pre-recorded DVDs
set to these standards. There are many different
TRACK 4.mp3
TRACK05
playback quality.
always
be
sought
from the
copyright
owner.
right
with Audio and MP3/WMA Disc
Operation
CD
Pause
MP3
1 Press PAUSE/STEP
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
or
To repeat
1
press
CD
another Track
MP3
WMA
Press . twice
track.
case
briefly
to
step back
to the
previous
of audio CD, to go directly to any track, enter
using the numbered buttons (0-9)
during playback.
Repeat Track/All/Off
CD
MP3
WMA
appears
on
the
at your chosen end
menu screen.
point.
repeat all tracks
on a
disc, press REPEAT
icon and "ALL" appears
a
on
the
MP3
Repeat icon and "OFF" appears
3D Surround
This unit
produce
can
on
the
play,
press
menu screen.
CD
a
3D Surround effect, which
speakers normally required
multi-channel audio from
a
or
to listen to
home theater system.
1 Press DISPLAY or AUDIO
3 Press 3/4
during playback.
repeatedly
until the desired sound is
selected.
menu screen.
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.
CD
3 To exit the sequence and return to normal
A-B again.
screen,
2 Press 1/2 to select "NORM." or "3D SUR".
second time.
Search
"
Repeat icon and "A B" appears on the menu
and the sequence begins to play repeatedly.
more
screen.
Repeat
again
press A-B at your chosen start*
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five
1 To repeat the track currently playing, press REPEAT.
The Repeat icon and "TRACK" appears on the menu
The
Repeat icon and "A
2 Press A-B
The
the track number
2 To
sequence.
The
Press . or > briefly during playback to go to the
next track or to return to the beginning of the current
track.
In
a
CD
During disc playback,
ing point.
The
Moving to
A-B
Changing
the Audio Channel
CD
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
WMA
1 Press and hold . or > for about two seconds
during playback.
The
player
will
now
go into SEARCH mode.
2 Press and hold . or >
repeatedly to select the
required speed: mX2, mX4, mX8 (backward) or
MX2, MX4, MX8 (forward).
Search speed and direction
are
indicated
on
the
menu
screen.
3 To exit SEARCH
Random
mode, press PLAY.
CD
1 Press RANDOM
MP3
WMA
during playback
or
when
playback
is
stopped.
The unit automatically begins Random
"RAND." appears on the menu screen.
2 To return to normal
repeatedly
Playback
and
playback, press RANDOM
disappears on the menu
until "RAND."
screen.
27
OPERATION
Operation
Viewing
with JPEG Disc
JPEG disc
a
JPEG
Player can play discs with JPEG files and
Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
This DVD
1
Insert
disc and close the
a
TV
menu
to another File
Press .
or
>
once
advance to the next file
1 Press PAUSE/STEP
appears
on
during viewing a picture
to the previous file.
to
or
Still Picture
tray.
The MP3/WMA-JPEG choice
Moving
the
screen.
slide show.
during
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
The
player
will
now
MP3 WMA
To
JPEG
2
Press 3/4 to select the JPEG then press
flip the picture
Press 3/4 during showing a picture
picture horizontally or a vertically.
to
flip
the
SELECT/ENTER.
The JPEG
menu
appears
on
the TV
screen.
To rotate
Press 1/2
JPEG
picture
Folder1
Folder2
picture
during showing
clockwise
or
a
picture
to rotate the
counter clockwise.
Folder3
Folder4
Folder5
Notes
Folder6
Folder7
on
JPEG
Recordings
Folder8
Slide
Depending
Off
Speed
upon the size and number of the JPEG
a long time for the DVD player to
files, it could take
Press 3/4 to select
and SELECT/ENTER.
3 A list of files in the folderfolder,
appears.
Press RETURN to
choice menu.
a
move
to the MP3/WMA-JPEG
If you
"
"
in
a
file list and want to return to the Folder
the 34 buttons
on
the remote to
highlight
and press SELECT/ENTER to return to the
previous
menu screen.
If
want to view
you
4 highlight
a
a particular file, press 3/4 to
file and press SELECT/ENTER or
PLAY.
Press TITLE to
move
Press DISC MENU to
to the next page.
move to the previous page.
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
1024X768
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
Tip
are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Press 1/2 to highlight the Slide
There
then press 3/4 to select the
option
you want to
use, and press SELECT/ENTER.
To
at
other
viewing
any
5 Thestop
JPEG
appears.
menu
28
reduce the resolution of the JPEG files
pixels
and burn another disc.
on
the disc should
Some disc may be incompatible due to different
recording format or condition of disc.
When you are using software such as "Easy CD
Creator" to burn the jpeg files into the CD-R, ensure
that all the selected files have the ".jpg" extensions
when
copying
File
time, press STOP.
them
into the CD
layout.
shown
by
as
".jpe" or ".jpeg" extensions, please
as ".jpg" files.
".jpg" extension will not be able to
player. Even though the files are
JPEG image files in windows explorer.
names
be read
Picture1.jpg
Speed
---
be less than 650.
rename
to move to
Folder1
5/32
big
If the files have
Viewing the file proceeding starts.
During viewing a file, press RETURN
the previous menu (JPEG menu).
JPEG
too
Total number of files and folders
are
use
are
to less than 2 mega
Tip
list,
read the disc's contents. If you don't see an ondisplay after several minutes, some of the files
screen
without
this DVD
Programmed Playback
CD
VCD2.0
with Audio CD
Programmed Playback
VCD1.1
function enables you to store your favorite
tracks from any disc in the player memory.
Program
Program
with Video CD
Note
On
a
setup
Video CD with PBC, you must set PBC to Off on the
menu to use the Program function. See page 18.
contain 30 tracks.
can
Press PROGRAM
1
WMA
Programmed Playback
and MP3/WMA disc
The
MP3
mode to enter the
during playback or in
Program Edit mode.
the
E
The
mark will appear to the right of the word
on the right side of the menu screen.
stop
Program
Insert Video CD and close the
1
2
Press PROGRAM while
The VCD
Program
menu
is
playback
stopped.
will appear.
Program
VCD
OPERATION
tray.
E
TRACK 1
TRACK 2
Note
TRACK 3
Press PROGRAM to exit the
Program
TRACK 4
Edit mode;
TRACK 5
TRACK 6
E
the
mark will
disappear.
TRACK 7
Clear All
TRACK 8
Select
2 place
a track, then press SELECT/ENTER to
the selected track on the Program list.
Note
Repeat step 2
Program list.
3
to
place
the
TRACK 12
TRACK 2
TRACK 8
TRACK 1.mp3
TRACK 2.mp3
TRACK 3
TRACK 10
TRACK 2.mp3
TRACK 4.mp3
TRACK 4
TRACK 3
TRACK 3.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 7
Clear All
TRACK 8
STER.
0: 56: 18
Audio CD
Clear All
TRACK 8.mp3
NORM.
00:00
To repeat the track
programmed track you selected last is highlighted
on
5 playing.
the TV
PROGRAM.
screen.
Tracks
currently playing,
press REPEAT.
on
the
menu
screen.
To repeat all tracks on the program list, press
REPEAT a second time.
Repeat icon and "ALL" appears on the menu screen.
Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.
move
Press PLAY to start.
6 Playback begins
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
stops after all of the tracks
Playback
played
have
playback,
on
the
Program
list
normal
playback
from
programmed
Program
press PROGRAM to exit the
mode;
the
Erasing
a
E
mark will
track of CD
disappear
(or MP3/WMA) list
and
and then
press SELECT/ENTER.
"PROG." indicator disappears
on
the
Track from
Program
List
1 Press PROGRAM
MP3/WMA disc
Program
once.
resume
a
from
To cancel
to the next page.
Press DISC MENU to move to the previous page.
select
with
left.
The
Press TITLE to
Edit
on
Repeat icon and "TRACK" appears
The
Press 3/4 to select the track you want to start
7
on
menu.
"Programmed Playback
normal
Repeat Programmed
menu
the program list.
To
resume
"NORMAL" appears
Press 2.
The
2-6 of
Program
OFF
3
MP3/WMA
menu
steps
PROGRAM to exit the
playback
4 programmed playback,
press
TRACK 5.mp3
TRACK 6
Follow
or
Audio CD and MP3/WMA disc"
To
TRACK 3.mp3
TRACK 4.mp3
Press RETURN
3
E
TRACK 8.mp3
TRACK 1
TRACK 5
4
on
Program
MP3 WMA
E
Program
CD
additional tracks
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to move to the
Program
list.
3 Use 3/4 to select the track that you wish to erase
from the
Program
list.
4 Press CLEAR.
The track will be erased from the
menu screen.
Erasing
1 Follow
List"
as
the
Program list.
Complete Program
steps
1-2 of
"Erasing
a
List
Track from
Program
above.
2 Use 3/4 to select "Clear
All", then press
SELECT/ENTER.
The
complete Program for the disc
The programs
are
will be erased.
also cleared when the disc is removed.
29
Additional
On Screen
Operation
-
VCR part
Video Doctor
Display
You may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your VCR will appear on the TV screen. If a recording
is taking place these On Screen Displays will not be
recorded onto the tape.
(Self-Diagnosis)
This feature informs you that there is a problem with
error messages will appear on the TV
your VCR. These
screen.
1
Press i.
Press 1
or 2
to select Dr.
Press OK.
1
Press CLK/CNT to
Press CLK/CNT
display.
repeatedly
to
cycle through
the
The tape counter and amount of
tape left will appear if there is a tape loaded.
display options.
12
REC
majority of the On Screen
leaving only the clock or tape
After 3 seconds the
2 Displays
will clear
counter and the amount of
tape left
the
on
P
SET
R
Pr-12
ACMS
TIME
DATE
SYSTEM
AB
C
OSD
VCR
VCR
Dr.
Dr.
fOSD
ON
OFF
OKi
OPR
screen.
VCR
Press CLK/CNT
the TV
again
to remove all
displays
from
Dr.
VIDEO DOCTOR
HEAD STATUS
screen.
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
OK
Tape Counter Memory Stop
The
Digital Tape
Counter
i
be displayed on the display
by pressing CLK/CNT on
Digital Tape Counter indicates
recordings on the tape.
can
window instead of the time
the remote control. The
the relative
positions
of
2
Press
3 or 4
to check a
problem.
HEAD STATUS
O
PLEASE CLEAN:
Clean your video heads.
1
Press CLK/CNT.
TAPE STATUS
Press CLEAR to set the counter to 0:00:00.
Press PLAY
or
start
O
recording.
The tape counter will display the actual
hours, minutes and seconds.
play
Press STOP when
playback
or
recording
is
complete.
Press BACKWARD.
The control buttons on the front of the unit can be
switched off so that your unit can only be operated
using the remote control.
Press C.LOCK.
will appear in the display window.
None of the buttons on the front of your unit will
(except
If any buttons
O
ez
display
are
window for
a
Press i.
(easy) repeat
1
During play back, press
point where repeat play
few
2
will
Release
ez
REPEAT at the
is to be concluded.
REPEAT at the
ez
holding
section is
reverse
search.
point
where repeat
play
replayed
twice
automatically.
to switch off the child lock.
again
disappear in the display
window.
Note
Pressing
ez
REPEAT
return to normal
30
& hold
the
is to start.
The
2
recording.
pressed
seconds.
Press C.LOCK
recording.
PR-01 26 10:00~11:00SP
Then, your VCR will go into
the front of your unit
will flicker in the
the number of timer
By pressing & holding ez REPEAT during play back,
holding section is replayed twice automatically.
).
on
2Shows
Shows the current status of timer
3
Child Lock
work
tape with its protection tab in place
NEXT TIMER PROGRAMME
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
1
a
NO. OF TIMER PROGRAMME
O
2
NOT RECORDABLE:
Insert
time in
play.
again during repeat play,
will
Additional
Operation
Hi-Fi Stereo Sound
Your VCR will record and
-
VCR part
System
playback
Hi-Fi stereo sound.
This allows you to record and playback the sound in
several different ways. Video cassettes recorded on
your VCR will have a normal mono audio track and two
VHS Hi-Fi stereo audio tracks. These stereo tracks
OPERATION
allow you to make audio recordings in Hi-Fi stereo or
bilingual mode from a TV broadcast, stereo audio system,
video disc or another Hi-Fi VCR.
1
Your VCR allows you to enjoy broadcasts with standard stereo, bilingual and mono sound. The particular type of sound received or that recorded will be
briefly displayed on the TV screen for a couple of
seconds:
STEREO
Sound is
and
automatically
mono
recorded
the Hi-Fi stereo
on
tracks of the video tape.
BIL
Both audio channels will be recorded
stereo tracks. The
will be recorded
on
primary language
the
mono
on
the Hi-Fi
channel
(left)
track of the video
tape.
MONO
The sound is recorded
mono
on
the Hi-Fi tracks and the
track of the video tape without any
Press AUDIO
repeatedly
separation.
until the desired audio
2
mode appears.
3
The choice is STEREO, LEFT, RIGHT and MONO.
In BIL playback the primary language is output on
the left channel and the
secondary
channel is out-
put simultaneously from the right channel when
audio output is set to STEREO. The primary language will be output from both channels when the
audio
setting
is MONO.
Please note that when
adjusting
the
tracking
control
Hi-Fi stereo sound may revert to MONO.
31
Additional
Operation
Last Condition
DVD
This
CD
player
-
DVD
part
Video Mode
Memory
VCD1.1
memorizes the
If you load
a
user
settings
ering
for the last disc
disc that has its
settings
VCD2.0
VCD1.1
playback picture may be flickon straight lines. That
interpolation or De-interlace is not
Dot Crawl is shown
Vertical
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
memo-
video mode.
To
the video mode, press and hold DISPLAY
during disc playback. The new video
change
about 3 seconds
Notes
--
or
means
rized, the latest stop position is automatically recalled.
--
DVD
With certain discs, the
that you have viewed. Settings remain in memory even
if you remove the disc from the player or switch off the
player.
Setting
displayed on the TV screen.
quality has improved. If not,
procedure until picture quality is
mode number selected is
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
Check whether the video
repeat the above
improved.
it.
Video mode sequence:
MODE1
Screen Saver
The
screen saver
DVD
Player
in
picture
→
MODE2
→
MODE3
→
MODE1
If you turn off the power, the video mode will return to
initial default state (MODE1).
appears when you leave the
stop mode for about five minutes.
Detailed
MODE1
The
Description
of each Video Mode
material of the DVD video
(film material
material) is determined from disc information.
MODE2 : Suitable for playing film based content or video
based material recorded by the progressive scan method.
MODE3 : Suitable for playing video based content with comparatively little motion.
or
:
source
video
Note
The video mode
setting only works when
Progressive Scan mode is set to "On" on
menu.
32
the
the setup
Special Recording
from DVD To VCR
Copying
This unit allows you to copy the contents of
VHS tape with a press of the COPY button.
Recording from
a
DVD to
a
sure
setup
recorder
With this video recorder you
an external source, such as
recorder
Note
Be
"Progressive Scan"
to set
protected,
make
recordings
from
from another video
camcorder.
to "Off" on the
Note
to copy is copy
you may not be able to copy the disc.
attempting
are
In the
following description, this video recorder will be
recording and will be referred to as VCR
The other appliance will be used for playback and
one
2
or a
can
copying
menu.
If the DVD you
1
another video
used for
Insert Disc
B.
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
will be referred to
Insert VHS
Insert
3 Copy
a
1
Tape
blank VHS
videotape
the DVD to VHS
Press the COPY button
unit front
REC/ITR button
on
the
panel.
The DVD will go into Play mode and the VCR will
go into Record mode.
If the DVD disc
press the
Play
the
menu
button
appears, you may need to
manually
to
IN
AV1) on the rear
(L/R) / VIDEO 2 on
a
blank
recording from AUDIO
(VCR IN AV1) terminals
AV 1 for
L/R
VIDEO
on
(VCR
the
IN
rear
AV1)/
of your
unit.
DVD
replay
AV1)/VIDEO (VCR
Press AV until the socket you wish to record from is
begin copying.
the unit may
IN
3 displayed. (VCR B)
AV 2 for
twice within 5 seconds to end the copy.
You must stop the Copy process manually when
or
(VCR
panel
Insert the recorded tape into VCR A and
into VCR B.
Copy
4 Stop
When the
is finished playing, press STOP
again.
VCR A should be connected to the AUDIO L/R
2 tape
Process
the DVD movie ends,
record over and over
VCR A.
of your unit or AUDIO 2
the front panel of your unit.
into the VCR deck.
Tape
or
as
recording
terminals
from AUDIO 2
(L/R)/ VIDEO
2
the front of your unit.
on
and
To start
4 and
5
press the REC/ITR
VCR A.
recording,
PLAY
on
When you want to finish
on both video recorders.
copying,
on
VCR B
press the STOP
Press STOP twice within 5 seconds at this unit.
33
OPERATION
Troubleshooting
Check the
following guide
for the
possible
cause
DVD
or
VCR do not
a
before
problem
service.
contacting
Cause
Symptom
work
of
DVD
or
Correction
VCR button is not switched
Refer to page 2.
properly.
properly.
No power.
The power cord is disconnected.
Plug the power
securely.
The power is on, but
the DVD player does
not work.
No disc is inserted.
Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
No
The TV is not set to receive DVD
picture.
signal
Select the
the TV
on
output.
player
No sound.
not start
player
playback.
Set
The equipment connected with the
audio cable is not set to receive DVD
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
are
not connected
properly.
Video tape cannot be
inserted.
No Hi-Fi sound
Progressive Scan
page 17).
to "Off"
Connect the audio cable into the
jacks
securely.
The power of the equipment connected
with the audio cable is turned off.
Turn on the equipment connected with
the audio cable.
Digital Audio Output
position.
The disc is
is set to the
An
unplayable
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
Clean the disc.
dirty.
are
not tuned in
properly.
Check
Insert
disc is inserted.
tuning,
a
carry out
playable
disc.
tuning again.
the disc
(Check
type and Regional code.)
placed upside
The disc is not
does not work
(see
jacks
securely.
The disc is
The remote control
screen.
The Progressive Scan is set to "On" on
the setup menu but is connected to a
standard(analog) television.
The TV channels
does
the TV
Connect the video cable into the
The
The DVD
on
securely.
wrong
is poor.
appears
securely.
The audio cables
picture
appropriate video input mode
the picture from the DVD
so
The video cable is not connected
signal output.
The
cord into the wall outlet
placed
Place the disc with the
down.
down.
within the
guide.
playback
Place the disc on the disc tray
inside the guide.
The disc is
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
the rating level.
Rating
There is an obstacle in the path of the
remote control and this unit.
Remove the obstacle.
The batteries in the remote control
exhausted.
Replace
Is the cassette compartment
Audio mode is not set
are
empty?
properly.
Eject
the batteries with
or
side
correctly
change
new ones.
the tape in.
Select "STEREO" by repeatedly
"AUDIO" on the remote control.
pressing
Video Head
Cleaning
accumulating on the head after a long period of time can cause the playback picture to
up. High quality video cassette tapes will not normally deposit dirt onto the video head, but
might. Clean the video heads with a commercially available video heads cleaning tape.
Dirt
34
become blurred or broken
old or damaged tapes
Language Code
Enter the
(See
appropriate
17).
List
code number for the initial
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
35
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country Code" (See
page
19).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and Barbuda
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
CI
Ivory Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
Territory
OM
Oman
UY
Uruguay
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape Verde
JP
Japan
PL
Poland
VI
Virgin Islands (British)
Virgin Islands (USA)
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Anguilla
Kingdom
Outlying
Islands
Miquelon
City State
Grenadines
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman Islands
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
36
Republic
(French)
Specification
General
Power
requirements
AC 110-240V, 50/60 Hz
Power
consumption
23W
Dimensions
Mass
430 X 85 X 293
(approx.)
4.8
(approx.)
mm
(w/h/d)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
display tape
RF Modulator
UHF 22
68
-
(41˚F
to
REF NC
95˚F)
(Adjustable)
System
Laser
Semiconductor laser,
Video Head system
Double azimuth 4 heads, helical
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
wavelength
650
nm
scanning.
CD:8Hzto20kHz
ratio
Signal-to-noise
(ANALOG OUT
More than 100dB
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
connectors
only)
(DVD)
(CD)
Inputs (VCR)
Audio
-6.0dBm,
more
Video
1.0
75 ohms, unbalanced
Vp-p,
than 47 kohms
Outputs (DVD)
VIDEO OUT
1
S-VIDEO OUT
(Y) 1.0 Vp-p 75 ohms, negative sync., Mini Din 4-pin
(C) 0.3 Vp-p 75 ohms
(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
COMPONENT VIDEO OUT
Vp-p
75 ohms, sync
negative
Audio output
(coaxial audio)
0.5V(p-p),75Ω,RCAjackx1
Audio output
(optical audio)
3 V
Audio output
(analog audio)
2.0 Vrms
(p-p),
75
Ω, Optical
(1 KHz,
0
dB),
connector
600
x
x
1
1
Ω, RCA jack (L, R)x2
Outputs (VCR)
Audio
-6.0dBm, less than 1 kohms
Video
1.0Vp-p,
Design
and
specifications
are
Manufactured under license from
subject
to
change
75 ohms, unbalanced
without notice.
Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol
are
trademarks of
Dolby
Laboratories.
"DTS" and "DTS Digital Out"
are
trademarks of
Digital Theater Systems,
Inc.
37
P/NO
:
3834RP0108T
Download PDF

advertising