LG | V8824W | LG V8824W Owner’s Manual

DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
V8824W
PAL
BZ03
Before
connecting, operating
or
adjusting this product,
carefully and
read this instruction booklet
please
completely.
Safety Precautions/Important
notes on
controlling
CAUTION
Notes
by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyright material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
(OR BACK)
discs.
NO USER-SERVICEABLE PARTS INSIDE
This
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
This
an
shock to persons.
product incorporates copyright protection technology that
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
is
SERIAL NUMBER: The serial number is found
this unit. This number is
The exclamation mark within
equilateral triangle
an
is intended to alert the
important operating
user to the presence of
and maintenance (servicing)
instructions in the literature
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
TRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
CLASS 1
KLASSE 1
LASER PRODUCT
LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT
Digital Video Disc Player employs
Model No.
Serial No.
LASER
a
Laser
?
Complete versatility
Tapes.
?
Watch
System.
proper use of this product, please read this owner's
carefully and retain for future reference, should the unit
?
contact an authorized service location-
require maintenance,
service procedure.
see
Use of controls,
adjustments or the performance of procedures
specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
?
such
as
apparatus shall not be exposed to water,
splashing and that no objects filled with liquids,
vases, shall be placed on the apparatus.
or
a
DVD while
play DVD, VCDs, audio CDs
to
recording
a
or
VHS
TV show to the VCR.
Remote controls both DVD and VCR decks.
Records from DVD to VHS
with Macrovision).
(unless
DVD is copy
protected
Hi-Fi Stereo VCR.
Important
notes on
controlling
this
unit
This unit uses one set of controls to operate both DVD
and VCR. The following buttons are helpful in
successfully controlling each part.
CAUTION: The
dripping
___________________________________
___________________________________
Features:
ensure
other than those
the back of
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH
THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION'OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
?
manual
on
to this unit and not available to
others.
CAUTION:
To
unique
accompanying the
product.
This
copyrights:
It is forbidden
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT REMOVE COVER
on
this unit
1
2
POWER Button
Press the POWER button on the remote control
front panel to turn on this unit.
or
DVD Button
Press DVD button
on
the remote control when you
want to control the DVD.
VCR Button
3 Press the VCR button
on the remote control when
you want to control the VCR.
The VCR indicator will light on the front panel
display to show that the VCR is selected.
4
DVD/VCR button
Press the DVD/VCR button on the front panel to
control between the DVD and the VCR.
toggle
2
Table of Contents
Introduction
SafetyPrecautions.........................2
2
Important notes on controlling this unit.
.
.
.
.
.
.
.
.
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
.
RemoteControl............................7
RearPanel................................8
Preparation
Connections............................9-10
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
.11-15
BeforeOperation-VCRpart.
.11
TuninginavideochannelonyourTV.
.11
UsingyourVCRfortheveryfirsttime.
SettingtheclockManually.................12
Tosetthecoloursystem..................12
Howtousingthemainmenu...............13
.13
TuninginTVstationsAutomatically.
.14
TuninginTVstationsManually.
.15
ChangingtheorderofTVstations.
DeletingTVstations......................15
.16-19
BeforeOperation-DVDpart.
GeneralExplanation......................16
On-ScreenDisplay.......................16
InitialSettings........................17-19
17
Initial Settings General Operation.
Language..........................17
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................17
Sound.............................18
Others............................18
ParentalControl......................19
Operation
OperationwithTape.....................20-22
Playingatape..........................20
.20
CM(CommercialMessage)Skip.
.20
OPR(OptimumPictureResponse).
.21
InstantTimerRecording(ITR).
22
Timer recording using On Screen Display.
.23-25
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............23
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
GeneralFeatures........................23
MovingtoanotherTITLE...............23
23
Moving to another CHAPTER/TRACK
.
.
.
.
.
.
.
.
.
.
26-27
.
.
.
.
.
.
.
.
.
.
26
.26
Pause.............................27
MovingtoanotherTrack...............27
RepeatTrack/All/Off..................27
Search.............................27
Random...........................27
RepeatA-B.........................27
3DSurround........................27
.27
ChangingtheAudioChannel.
OperationwithJPEGDisc...................28
ViewingaJPEGdisc.....................28
MovingtoanotherFile.................28
.
.
.
.
.
.
.
.
.
.
StillPicture.........................28
Toflipthepicture.....................28
Torotatepicture......................28
.28
NotesonJPEGRecordings.
ProgrammedPlayback.....................29
Programmed Playback with Audio CD and
.
.
.
.
.
.
.
.
.
.
.
MP3/WMAdisc.........................29
.29
ProgrammedPlaybackwithVideoCD.
.29
RepeatProgrammedTracks
.29
ErasingaTrackfromProgramList.
.29
ErasingtheCompleteProgramList.
.30-31
AdditionalOperation-VCRpart.
OnScreenDisplay.......................30
TapeCounterMemoryStop................30
Lock(ChildLock)........................30
.30
VideoDoctor(Self-Diagnosis).
Hi-FiStereoSoundSystem................31
.32
AdditionalOperation-DVDpart.
LastConditionMemory...................32
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ScreenSaver...........................32
VideoModeSetting......................32
SpecialRecording.........................33
CopyingfromDVDtoVCR.................33
33
Recording from another video recorder
.
.
.
.
.
.
.
Reference
Your TV with the Supplied Remote
Control..................................34
Controlling
Troubleshooting..........................35
LanguageCodeList.......................36
CountryCodelist.........................37
Specification.............................38
.
SlowMotion.........................23
24
Still Picture and Frame-by-Frame Playback
Search.............................24
Random...........................24
.
Operation with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
NotesonMP3/WMARecordings.
About the
.
Repeat............................24
RepeatA-B.........................24
TimeSearch........................24
3DSurround........................24
Zoom..............................25
MarkerSearch.......................25
symbols
for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
SpecialDVDFeatures....................25
TitleMenu..........................25
DiscMenu..........................25
CameraAngle.......................25
.25
ChangingtheAudioLanguage.
.25
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles...........................25
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In addition, this unit
play
can
a
DVD±R, DVD±RW,
Kodak PICTURE CD and CD-R
audio titles, MP3, WMA
(DVD only)
DVD
or
or
CD-RW that contains
JPEG files and SVCD also.
or
accompanying
feature content
additional feature content, or music album. Each title
is assigned a title reference number enabling you to
locate it easily.
Chapter (DVD only)
Sections of a picture
or a
musical
piece
that
are
smaller
than titles.
A title is
composed of one or several chapters. Each
assigned a chapter number, enable you to
locate the chapter you want. Depending on the disc, no
chapters may be recorded.
is
chapter
Notes
--
Depending
the conditions of the
recording equip(or DVD±R/±RW) disc itself,
some CD-R/RW (or DVD±R/±RW) discs cannot be
played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregular shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
on
ment or the CD-R/RW
--
--
Notes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be avail-
Track
(Video
Sections of
enabling
On
Regional
player
player is designed and manufactured
for playback of region "2" encoded DVD soft2
ware. The region code on the labels of some
DVD discs indicates which type of player can play those
discs. This unit can play only DVD discs labeled "2" or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
This DVD
4
on a
a
video CD
track number,
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
Types
There
of video CDs
are
two
with the
and DVDs
only)
piece
assigned
musical
Scene
Video CDs. Some DVDs made for business purposes
may not be played on the unit.
code of the DVD
or a
you to locate the track you want.
Video CDs
or
CD and audio CD
picture
audio CD. Each track is
or an
other functions may be added.
Refer also to the instructions applied with the DVDs and
able,
a
PBC
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
Video CDs not
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Continued)
Precautions
Storing
After
the unit
Handling
When
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
The
When
the unit
setting
picture and sound of a nearby TV or radio may be
distorted during playback. In this case, position the unit
The
away from the TV or radio,
removing the disc.
To
keep
Do not
near
or
turn off the unit after
volatile
liquids,
contact with the unit for a
leave marks
such
as
on
long period
Cleaning
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
ter out.
plastic products in
of time. They will
the surface.
soft, dry cloth. If the surfaces
soft cloth
lightly
solution. Do not
benzine,
light, as there may be a considerable temperature
increase inside the car.
insecticide spray,
To clean the cabinet
a
store the disc in its case.
the unit
Cleaning
Use
playing,
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
the surface clean
use
the unit. Do not leave rubber of
use a
discs
are
moistened with
a
extremely dirty,
detergent
mild
strong solvents, such as alcohol,
thinner, as these might damage the surface
or
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
records.
vinyl
use
About
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
5
INTRODUC
Front Panel and
Window
Display
POWER
Tape Eject
Switches the unit to ON
or
OFF.
Reverse
Go to
Skip/Scan, Rewind (
)
beginning of current chapter/track or
Press and hold for two seconds for
fast
a
to PREVIOUS
chapter/track.
search.
reverse
Rewinds the tape.
Forward
Skip/Scan, Fast-Forward (
chapter/track.
)
Go to NEXT
Press and hold for two seconds for
a
fast forward search.
Winds the tape forwards.
STOP ( A ) Stops playback.
Disc
Tray
Insert
a
disc here.
PAUSE/STEP
Pause
press
( /
)
playback temporarily /
repeatedly for frame-by-frame playback.
DVD/VCR Selector
VCR Record
DVD OPEN/CLOSE
Opens
Display
DVD to VCR
Copy
or
(
)
Tape Compartment
closes the disc tray.
Audio IN
window
Video IN Jack
Remote Sensor
PLAY
( G)
Starts playback.
Channel
Point the remote control here.
Indicates current title number
Programmed playback
CHPTRK
Indicates current
chapter
or
Programme Selectors.
track number
A disc is loaded in the DVD deck. (Lights when a disc is
loaded in the DVD deck and flashes when no disc is loaded.)
active.
Indicates repeat mode.
Bilingual
MP3 disc is inserted.
mode
Indicates total
VCR deck is
selected.
playing time/elapsed
The current TV show
or
VCR
recording
is
engaged
The Hi-Fi track of
Video CD
is inserted.
a
VHS tape is playing
Cassette-In indicator
PHOTO disc is
inserted.
A timer
WMA disc is
inserted.
Indicates TV
mode.
(See Notes on
page 21.)
time/current time
video is broadcast in stereo
DVD to VCR copy is in progress
DVD disc is
inserted.
VCR MP3
PROG
TITLE CHPTRK
BIL
STEREO COPY
DVD RPT ALL AB
VCD PHOTO WMA
TV
P/SCAN
Indicates the
6
(L/R)
Jacks
Shows the current status of the unit.
Button
Progressive Scan
is set to On mode.
REC
Hi-Fi
is
recording
programmed
or
in progress
Child Lock is
engaged
Remote Control
POWER
Switch this unit ON
or
OPEN/CLOSE
EJECT
Open or close the the disc
OFF.
DVD/VCR select button
operational mode of
remote control.
-
Select input
into tape.
(see
TV VOL +/--:
or
picture
PAUSE/STEP (
)
playback temporarily / press
repeatedly for frame-by-frame
playback.
PLAY (G)
Starts playback.
STOP(A)?
Stops playback.
?
Access or remove setup menu.
RETURN
Remove the setup menu.
Displays the menu of a video CD
with PBC.
-
?
-
?
Access the On-Screen Display.
Shows you the current time or
?
?
FGDE(left/right/up/down)
?
PR/TRK(+/-)
-
Select the
?
?
Play
if available
image.
LOCK
input sources
(Child Lock)
on
into tape.
and off.
TITLE
menu
of the disc if
PROGRAM
Access or remove program
?
MARKER
?
?
Repeat sequence.
recording speed of
menu.
Mark any point during playback.
SEARCH
Display MARKER SEARCH menu.
RANDOM/CM SKIP ?
tracks in random order.
-
video
Display the title
available.
DISC MENU
a DVD disc.
the tape.
-
angle
Switch the Child Lock
ENTER/OK
selection.
menu
A-B/LP
camera
ZOOM
REC/ITR
Record your
-
-
language.
?
-
of
subtitle
a
Enlarge
Select channel programme of VCR.
To adjust tracking.
To control vertical tremble during
picture still.
or
ANGLE
Select DVD
menu
(DVD)
SUBTITLE
Select
counter.
menu
AUDIO
Select an audio language
an audio channel (CD).
DISPLAY
CLK/CNT
Access
off TV sound.
SETUP/ i
Pause
Acknowledge
on or
SKIP(./>)
Go to next chapter or track. Returns to
beginning of current chapter or track
or go to previous chapter or track.
search.
-
off the TV.
source.
Adjusts TV's volume.
MUTE: Turns
-
item in the
recording
TV PR +/--: Selects TV's channel.
forward.
VCR: Rewinds the tape during the
STOP mode, for fast reverse picture
search and Advances the tape during
an
on or
TV AV: Selects the TV's
(m/M)
Select
for
34)
p.
TV POWER: Turns
BACKWARD / FORWARD
the STOP mode, fast forward
source
TV Control Buttons
TV/VCR
Switch between your TV's tuner
and the VCR's internal tuner.
DVD: Search backward
Tape Eject.
AV
0-9 numerical buttons
Select numbered items in a menu.
-
tray.
-
Selects
?
CM SKIP
?
CLEAR
Clear
a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
?
REPEAT
Repeat chapter, track, title, all.
-
-
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
the buttons.
Distance: About 23 ft
Detach the
AAA AAA
(7 m)
from the front of the
installation
battery
cover on
the
rear
of
the remote control, and insert two R03
(size AAA) batteries
aligned correctly.
remote sensor
Angle:
battery
with
and
About 30° in each direction of the front of the
remote sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel
AERIAL
Connect the aerial
this
using
jack.
AUDIO IN
(Left/Right) (VCR IN AV1)
signals from an external
Receive the audio
AUDIO OUT
Connect to
source
to VCR.
(Left/Right) (DVD/VCR OUT)
amplifier, receiver or stereo system.
an
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(DVD
EXCLUSIVE
Connect to
a
TV with Y Pb Pr
AUDIO OUT
Connect to
Pr
(Y
Pb
Pr)
OUT)
inputs.
(Left/Right) (DVD EXCLUSIVE OUT)
amplifier, receiver or stereo system.
an
R
R
L
L
Pb
Y
AC Power Cord
Connect to
a
power
OPTICAL
source.
(Digital audio out jack)
(DVD
OUT)
Connect to digital (optical) audio equipment.
EXCLUSIVE
S-VIDEO OUT
Connect to
COAXIAL
Connect to
VIDEO OUT
Connect to
VIDEO IN
a
(VCR
EXCLUSIVE
OUT)
input.
(Digital audio out jack) (DVD EXCLUSIVE OUT)
digital (coaxial) audio equipment.
IN
AV1)
signals
from
an
external
(DVD/VCR OUT)
using this jack.
Connect to your TV
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
(DVD
TV with S-Video
(DVD/VCR OUT)
TV with video inputs.
Receive the video
RF.OUT
a
source
to VCR.
Connections
Tips
Depending
Notes
your TV and other equipment you wish
to connect, there are various ways you could connect
the unit.
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
For better sound reproduction, connect this unit's
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page 10.
--
--
on
-
-
Caution
Make sure this unit is connected directly to the TV.
Set the TV to the correct video input channel.
Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
-
Connecting
to a TV
Make one of the following connections, depending on
the capabilities of your existing equipment.
When using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, set TV's input to COMPONENT VIDEO.
When using the S-VIDEO OUT jack, set the TV's
input to S-VIDEO.
Set the
Progressive to "On" on the setup menu for
progressive signal, see page 17.
Once the setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that "NO DISC" is displayed on the display window.
2) Press STOP and hold it for five seconds before
releasing it. The video output will be restored to
the standard setting and a picture will once again
be visible on a conventional analog TV or monitor.
Progressive scan does not work with the analog
video connections (yellow VIDEO OUT jack) or SVIDEO connection.
Rear of this unit
(DVD
exclusive out
connection)
R
Pr
R
L
L
Basic connection
(AV)
Pb
1
Connect the VIDEO jack on this unit's DVD/VCR
OUT to the video in jack on the TV using the video
cable.
2
Connect the Left and Right AUDIO jacks of this
unit's DVD/VCR OUT to the audio left/right in jacks
on the TV using the audio cables.
Basic connection
Y
(RF)
1
Connect the antenna cable from your indoor/ outdoor antenna to AERIAL jack on the rear panel of
this unit.
2
Connect the supplied RF antenna cable from the
RF.OUT jack on the rear panel of this unit to your
television's Antenna Input.
Rear of TV
AERIAL
VIDEO
INPUT
COMPONENT VIDEO INPUT
/PROGRESSIVE SCAN
Pr
Pb
AUDIO INPUT
Y
L
S-VIDEO INPUT
R
DVD exclusive out connection
Component
Video
(Color
Stream
) connection
1
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the unit to the corresponding
in jacks on the TV using an Y Pb Pr cable.
2
Connect the Left and Right AUDIO OUT jacks of
the unit to the audio left/right in jacks on the TV
using the audio cables.
1
2
S-Video connection
Connect the S-VIDEO OUT jack on this unit to the
S-Video in jack on the TV using the S-Video cable.
Connect the Left and Right AUDIO OUT jacks of
this unit to the audio left/right in
using the audio cables.
jacks
on
Pr
R
R
L
the TV
L
Pb
Y
Progressive
Scan
(ColorStream Pro) connection
If your television is
a
high-definition
or
"digital ready"
Rear of this unit
television, you may take advantage of the DVD
Player's progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
1
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the unit to the corresponding
in jacks on the TV using an Y Pb Pr cable.
2
Connect the Left and Right AUDIO OUT jacks of
the unit to the audio left/right in jacks on the TV
using the audio cables.
(Basic connection)
Note
an S-Video input, connect this unit with
the S-video cable. When using an S-video cable, do not
connect the yellow video cable.
If the TV has
9
PREATION
Connections
Connecting
to
(Continued)
Optional Equipment
Notes
--
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II /Pro Logic
Connect the Left and
Right AUDIO OUT jacks on this
unit to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
channel
1
Connect this unit's DIGITAL AUDIO OUT
jack
corresponding in
digital (coaxial or
the
(COAXIAL or OPTICAL) to
jack on your amplifier. Use
optical) audio cable.
a
You will need to activate this unit's
2 (See "Digital
Digital
A
Audio
Output"
on
digital output.
18).
page
Multi-channel sound
digital multi-channel
quality. For this
connection
provides
the best
sound
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
Rear of this unit
R
Pr
R
L
L
Pb
Y
2 channel
analog
stereo
Both DVD and
or
Dolby
Pro
Logic
II / Pro
Logic
connection
Digital
DVD exclusive out
VCR out
multi-channel
connection
(DVD exclusive
out connection)
L
R
AUDIO INPUT
Amplifier (Receiver)
10
COAXIAL
DIGITAL INPUT
OPTICAL
DIGITAL INPUT
If the audio format of the
the
capabilities of
produce a strong,
--
To
see
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the
On-Screen
Display,
press AUDIO.
Before
Tuning
Operation
in
a
VCR part
-
video channel
on
your TV
6
is already used by another TV station, or if
picture is distorted, you can change the
transmitter channel of your VCR. Stages 5
will show you how to change the output
frequency of your VCR.
Your TV receives
recorder
signals
8
~
RF
channel number
7
on
2
Insert
your VCR.
video tape into your VCR
the remote control.
on
which you wish to
watch video's.
Don't worry if you don't have a video-tape to play at
this stage! If you switch your VCR on and continue
stages 3 4, instead of seeing video playback tune
~
your TV until you
3
see a
bright
blue
Tune this channel until the video
screen.
picture
is
a
TV channel number
POWER
appears.
Store this channel
pre-recorded
and press PLAY on
Select a TV channel number
Select
sharp
on
which you wish to
watch video's.
on
the front of your VCR when
you have finished.
Tune this channel so that
your TV.
a
to select another video channel.
can
Press
that you have correctly installed your
described earlier in this book.
on
or 4
also set it to "OFF" if there is any interferwhen your TV is connected to the VCR with a
RCA lead.
sure
on
Press PROG. 3
ence
8
Press POWER to turn
i
You may select any channel number between 22
and 68.
You
called AV.
Turn
36
from the video
cables then your TV should already have a
dedicated video channel built into it, usually
as
CHANNEL
PSET
R
your TV
and tune it in so that you may watch video
tapes. If you have used AUDIO and VIDEO
a
screen.
the
like another TV station. You
(VCR)
have to select
Make
the front of your VCR for
The
The output frequency of this video recorder
(VCR) is set at UHF channel 36. If channel 36
VCR
or 4 on
than 4 seconds.
RF36 will appear in the display window.
following picture will be displayed on the TV
Notes
1
Press PROG. 3
more
on
a
bright
blue
screen
your TV.
Note
Make
sure
VCR and
that you have correctly installed your
successfully tuned in a dedicated video
on your TV. If you do not tune in a
dedicated video channel on your TV you will be
channel
unable to view and record video
tapes!
and the sound is clear.
If you have used a AUDIO and VIDEO cables you
will not have to tune your TV, simply select the AV
channel. The AV channel is already pre-tuned for
optimum
video
playback
on
your TV.
Using your VCR for the very first time
Following picture
will
display
on
the TV
screen
Store this channel
when you have just connected your video recorder
for the very first time.
you do not know how to do this.
To make
tuning
3 to 4
shown "ACMS"
4 You
on your TV.
will need to look at the TV instruction book if
out
stages
5 Only carry playback
clear video
Select
a
5
as
8 if you cannot obtain
described in stages 1
4.
~
TV channel number
as
TV stations,
please follow stages
(see p.13).
~
on
which you wish to
watch video's.
Make
sure
POWER
be
that your VCR is in
the remote control
on
displayed).
standby pressing
(only the clock will
ACMS
Pr-12
ACMS
OKi
11
PREATION
Before
Setting
Operation
the clock
-
VCR part
To set the colour system
Manually
The clock in your VCR controls time and date
settings for your VCR.
1
Press i.
1
Press 1
or
2 to select TIME DATE.
Press OK.
:.
-
-
--
--
--
2
The main
3
Press 1
or
Press 3
or 4
menu
---
.
will appear
on
the TV
screen.
2 to select the SYSTEM and press OK.
4 system used.
HHMNDDMMYY
--
Press i.
to select
according
to the COLOUR
12
TIME
DATE
2
i
Use the numbered buttons
to alter the
the remote control
on
HOURS, MINUTES, DAY, MONTH and
VCR
YEAR.
REC
fOS
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The
day
of the week will appear
automatically
ON
OFF
AUTO
PAL
MESECAM
SYSE
TEM
Dr.
SYSTEM
i
OPR
when
Press 1
5 Press
you enter the year.
or
2 to select the RF AUDIO.
3 or 4 to
select
according
to the RF AUDIO
used.
HHMNDDMMYY
8
:.
0010104THU
.
12
TIME
DATE
i
VCR
REC
fOS
ON
OFF
3
4
If you make a mistake press 1
correct details.
Press i.
12
or
RF I/I
RF B/G
RF D/K
SYSE
TEM
Dr.
SYSTEM
i
OPR
2 and enter the
6
Press i to
remove
the
menus
from the TV
screen.
Before
How to
Operation
using
VCR part
-
the main
Tuning
menu
This VCR
menus
The
can easily be programmed by using
displayed on screen.
menus are
the
controlled from the Remote
Control Handset.
1
2
If the TV broadcast
by pressing
Press i button.
menu
will appear
on
the TV
screen.
Automatically
is weak your VCR may
signal
not detect the necessary information and will not
be able to store them correctly. To overcome this
problem please
Switch on your TV set and video recorder
the POWER button.
The main
in TV Stations
section
1
2
on
turn to the MANUAL TUNING
PREATION
page 14.
Press POWER to turn
your VCR.
on
Press i button.
The main
Press 1
will appear on the TV
2 to select the ACMS.
menu
or
screen.
Press OK.
VCR
12
REC
PSET
R
Pr-12
ACMS
TIME
DATE
SYSTEM
Dr.
fOSD
ON
OFF
REC
REC
OKi
OPR
12
Timer
recording setting (see p. 22).
PR SET Manual tuning setting (see p. 14).
ACMS ACMS (Automatic Channel Memory
System) (see p. 13).
TIME DATE Date & clock setting (see p. 12).
SYSTEM To set the Colour TV System
(see p. 12).
Dr. To check a problem with your VCR
(see p. 30).
F.OSD ON/OFF To display the operational
mode of your VCR (see p. 30).
OPR To improve the playback picture
(see p. 20).
-
Pr-12
PSET
R
REC
ACMS
TIME
DATE
VCR
SYSTEM
Dr.
Pr-12
ACMS
fOSD
ON
OFF
-
OPR
OKi
-
-
O
O
O
O
-
-
ACMS
Pr-12
-
3
Press OK
again
change the menu language on the DVD setup
(See the Menu Language on page 17.)
can
menu.
3
Press 1 and 2 to select the desired
4
Press "i" to return to
to start the automatic
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
menu.
S
Press OK and press 3
a
or 4
TV
to select.
picture.
tuning
process.
Tip
You
OKi
ACMS
-
E
Pr-12
i
ACMS
The TV STATION TABLE will appear when
4 is complete.
Press i to
save
your
settings.
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
tuning
PR-07
PR-08
MOVE
:
DELETE
:
,
OKi
13
Before
Tuning
In certain
Operation
VCR part
-
in TV Stations
areas
4 Searching
Press
Manually
of the country broadcast
will
stop when it locates
a
station.
2 to select MFT.
signals
Press 3
or 4
to
adjust.
may be too weak for your VCR's automatic tuning
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations
manually
1
PR
CH
MFT
09
C10
00
in order for your VCR to store them.
CHANNEL/CABLE
Press i.
:
PSET
R
The main
Press 1
STATION
will appear on the TV
2 to select the PR SET.
menu
or
AV
i
screen.
Press 2 to select STATION
5 your
Press OK.
that you may
so
name
TV station.
Press OK.
PR
C09
12
REC
PSET
R
Pr-12
ACMS
TIME
DATE
SYSTEM
Dr.
OKi
OPR
PR
01
MFT
00
STATION
-
PSET
R
fOSD
ON
OFF
CH
C10
VCR
CH
MFT
STATION
C02
00
PR-01
PSET
R
6
Press 3
new
or 4
station
Press 1
or
OK i
to select letters and numbers for the
name.
2 to
move
back and forth between
characters.
CHANNEL/CABLE
:
AV
PSET
R
2
Press OK.
i
Press i.
The station table will appear.
Press 3 or 4 to select the programme number that
you want to tune
(for example,
PR
PR
C09
CH
MFT
STATION
C10
00
ABC
09).
PSET
R
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
7
PR-07
:
DELETE
:
new
TV station has
If you wish to
stages 1 7.
OKi
,
Press i, confirm the station
Press i again.
Your
PR-08
MOVE
OK i
now
manually
placement.
been tuned into your VCR.
tune other stations
-
3
Press OK.
09
Press AV to select C
(Standard stations)
or
S
(Cable stations):
C02
-
C69, S01
13
S41.
14
15
to tune with the numbered buttons or use 3 or 4
required
station.
PR
CH
09
C--
MFT
STATION
--
----
CHANNEL/CABLE
P
R SET
14
11
12
-
Enter the channel number of station that you want
to find the
10
:
AV
i
16
PSET
R
C10
ABC
00
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
--
--
-----
-----
MOVE
:
DELETE
:
,
OKi
repeat
Before
Operation
Changing
-
VCR part
the order of TV Stations
Deleting
After tuning TV stations into your VCR you may
wish to change the order in which they are stored
without having to retune them. The instructions given
on this page will show you how you can simply move
them into your desired order.
1
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
TV Stations
After tuning TV stations into your VCR you may
wish to delete a station.
The instructions given on this page will show you
how easily delete any unwanted TV stations.
1
screen.
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
12
PSET
R
REC
REC
Pr-12
ACMS
TIME
DATE
Dr.
TEM
ON
OFF
PSET
R
Dr.
TEM
PSET
R
OKi
OPR
PR
PR
SYS-
OKi
OPR
01
VCR
TIME
DATE
fOSD
SYS-
fOSD
ON
OFF
Pr-12
ACMS
VCR
12
PSET
R
CH
MFT
STATION
C02
00
PR-01
01
CH
MFT
STATION
C02
00
PR-01
CHANNEL/CABLE
CHANNEL/CABLE
:
AV
PSET
R
2
Press i.
Press 3
or 4 to select the programme number
you want to delete. (for example, PR 03)
01
C02
00
PR-01
02
C03
00
PR-02
03
C05
00
PR-03
00
PR-01
04
C06
00
PR-04
02
C03
00
PR-02
05
C04
00
PR-05
03
C05
00
PR-03
06
C07
00
PR-06
C08
00
C09
00
04
C06
00
PR-04
07
05
C04
00
PR-05
08
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PSET
R
PR-07
PR-08
MOVE
:
DELETE
:
OKi
,
PR-08
MOVE
:
DELETE
:
OKi
,
C02
00
02
C03
00
PR-01
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
C07
00
PR-05
06
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
3
Press 1.
After a short while, the selected station will be
deleted.
OKi
01
C02
00
02
C03
00
PR-02
03
C05
C06
00
PR-04
00
PR-05
C04
00
PR-03
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
C02
00
PR-01
02
C03
00
03
00
04
C05
C06
00
PR-02
PR-03
PR-04
05
06
C04
C07
00
00
PR-05
PR-06
07
C08
00
PR-07
08
C09
00
DELETE
P SET
R
4
PR-01
05
01
PR-08
MOVE
to select the programme number
you want to move to (for example, PR 05).
or 4
PSET
R
4
Press i.
Press 3
C02
04
AV
i
01
PSET
R
3
2
to select the programme number
you want to move (for example, PR 03).
Press 2.
Press 3
:
PSET
R
i
or 4
01
PREATION
screen.
,
OKi
Press i to remove the menus from the TV screen.
If you wish to delete other TV stations repeat
stages
1
-
3.
OKi
Press OK.
The selected programme will be moved to the new
programme number.
If you wish to move other TV stations repeat stages 1 4.
Press i to remove the menus from the TV screen.
:
:
01
C02
00
PR-01
02
C03
C06
00
03
00
PR-02
PR-03
04
C04
00
PR-04
05
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
08
MOVE:
PSET
R
DELETE
:
,
OKi
-
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
04
00
PR-02
PR-03
PR-04
05
C04
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
PR-07
PR-08
MOVE
:
DELETE
:
,
How to
selecting
Stored TV stations:
Stored TV stations can be selected in either of two ways.
Press PROG. 3 or 4 to select different stations that are
tuned into your VCR.
You may also directly select stations using the
numbered buttons on the remote control.
OKi
15
Before
General
This manual
Operation
DVD
-
part
Temporary
Explanation
the basic instructions for
gives
operating
require specific operation or allow
only limited operation during playback. When this
occurs, the symbol
appears on the TV screen,
that
the
indicating
operation is not permitted by this unit
is not available
or
On-Screen
The
TV
general playback
screen.
1
2
3
Press 3
or
can
be
highlighted.
the
change
The number buttons
(e.g.,
Repeat
A-B
title
can
setting
of
press ENTER to execute the
For
Video CDs
(non-PBC
only)
Video CDs
only)
Repeat Off
play
from this
prohibited
or
point
not available
some
Some discs may not
Screen Display.
provide
all of the below On-
If no button is pressed
Display disappears.
for 10 seconds, the On-Screen
item.
an
be also be used for
number).
(non-PBC
Notes
during playback.
Press 1
numbers
AB
Action
4 to select an item.
2 to
Repeat
All Tracks
Resume
The selected item will be
or
ALL
displayed on the
changed on the menu.
display operation
Press DISPLAY
Track
status can be
Some items
On-screen
Repeat
OFF
Display
Title
Repeat Chapter
CHAPT
TRACK
the disc.
on
Repeat
TITLE
this unit. Some DVDs
Feedback Field Icons
setting
functions,
setting.
DVD
Items
Function (Press 3/4 to select desired item)
Shows the current title number and total number of
Title Number
1/3
Chapter
1 /12
Time search
0:20:09
Audio
language
Digital Audio
Output mode
1 ENG
and
D
5.1 CH
OFF
1/1
chapters,
and
Shows the
number and total number of
chapter
skips
to the desired
chapter number.
elapsed playing time, and
point by the elapsed time directly.
searches the
Shows the current audio soundtrack
encoding method, and
changes the setting.
channel
language,
number, and
language,
angles,
and
1/2,or
Numbers, ENTER
1/2,or
Numbers
,
ENTER
Numbers
,
ENTER
1/2,or
AUDIO
1/2,or
and
SUBTITLE
changes the setting.
angle number and total
changes the angle number.
Shows the current sound
NORM.
mode,
number of
1/2,or
ANGLE
and
1/2
changes the setting.
VCD1.1
Items
Function (Press 3/4 to select desired item)
Shows the current track
Track Number
1/4
Time
Audio Channel
16
to the desired title number.
Shows the current subtitles
ABC
Sound
Sound
skips
Shows the current
Angle
VCD2.0
and
Shows the current
Number
Subtitle language
titles,
Selection Method
0:20:09
and PBC On
Shows the
mode,
and
number, total number of tracks
skip to the desired track number.
elapsed playing
Shows the audio
STER.
NORM.
channel,
changes the audio channel.
Shows the current sound
changes the setting.
time
Selection Method
1 /2,or
Numeric, ENTER
(Display only)
and
--
1
/2,or
AUDIO
mode,
and
1/2
Before
Initial
You
DVD
-
part
Picture
Settings
set your own Personal Preferences on this unit.
can
Initial
1
Operation
General
Settings
Aspect
DVD
4:3 Letterbox: Select when a standard 4:3 TV is con-
Operation
nected.
Displays
theatrical
images
picture.
above and below the
Press SETUP.
The setup
TV
menu
with
masking
bars
4:3 Panscan: Select when a conventional TV set is
appears.
connected. The video material formatted in the Pan &
Scan
Disc Audio
Original
Disc Subtitle
English
Disc Menu
Spanish
Rating
German
Country
TV
Code
Language
Scan
Progressive
Audio
Digital
is
played
off).
back in that
Output
Portuguese
Disc Audio
4:3 Letterbox
Greek
Disc Subtitle
4:3 Panscan
French
Disc Menu
16:9 Wide
Chinese
Rating
Other------------
Country
TV
Code
Aspect
Menu
Language
Scan
Progressive
Press 3/4 to select the desired item.
screen
as
well
as
setting for the
alternate setting(s).
While the desired item is
press 2,
3 3/4 select the desired selected,
setting.
Press ENTER
confirm your
4 selection.
then
to
Press
5 setup
additional steps.
require
RETURN
SETUP,
or
PLAY to exit the
menu.
Disc
Language
Original
DVD
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting this unit to
a standard (analog) television, set Progressive Scan to
for the disc's Menu, Audio, and
Subtitle.
The
set for the disc is selected.
original language
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 36. If you enter the wrong language
:
Scan
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.
DVD
language
a
Progressive
Off.
Language
Select
Output
Others
to
Some items
Audio
Digital
will show the current
selected item,
sides of the
16:9 Wide: Select when a 16:9 wide TV is connected.
Others
2 The
style (Both
cut
Italian
Aspect
Menu
style
picture are
Disc Audio
Off
Disc Subtitle
On
Disc Menu
Rating
Country
TV
Language
Progressive
code, press CLEAR.
Digital
Disc Audio
Original
Disc Subtitle
English
Disc Menu
Spanish
Rating
German
Country
TV
Code
Aspect
Menu
Scan
Audio
Digital
Output
Scan
Audio
Output
Others
Italian
Caution
Portuguese
Language
Progressive
Code
Aspect
Menu
Greek
Once the
setting for progressive scan output is entered,
image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
French
Chinese
an
Other-----------Others
to On in error,
Menu
Language
Select
a
you
see
language
1)
for the setup
menu.
when you press SETUP.
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
German
Rating
Italian
Country
TV
Code
menu
window.
2)
Press STOP and hold it for five seconds before
releasing
it. The video
standard
setting
ble
on a
and
conventional
output will be restored
picture will once again
analog TV or monitor.
a
to the
be visi-
Greek
Aspect
Menu
Portuguese
This is the
you must reset the unit.
Remove any disc from the unit and close the disc
tray. See that "NO DISC" is displayed on the display
Language
Progressive
Digital
Audio
Scan
Output
Others
17
PREATION
Before
Operation
DVD
-
part
Sound
Digital
Others
Audio
Output
Each DVD disc has
The DRC, Vocal, PBC and Auto
of audio output
variety
options.
player's Digital Audio Output according to the
Set the
a
type of audio system you
use.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
between On and Off.
Disc Audio
ment with a
Disc Menu
DTS decoder,
MPEG decoder.
or
Dolby Digital
on
the
Country
TV
a
2-channel
On
Off
Code
Aspect
Menu
decoder
Language
Progressive
digital
Scan
Audio
Output
Others
This unit outputs sounds in the PCM
2ch format when you play a DVD video disc recorded
stereo
On
Play
Rating
Digital
PCM: select when connected to
On
PBC
Auto
Stream/PCM: Select "Stream/PCM" if you connected
this unit's DIGITAL OUT jack to an amplifier or other
a
DRC
Vocal
Disc Subtitle
Dolby Digital decoder).
with
be
can
Press 3/4 to select the desired item and press
ENTER. The setting of the selected item is changed
if you connected this unit's DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equip-
equipment
Play settings
changed.
amplifier.
Dolby Digital, MPEG1,
MPEG2
or
recording
sys-
Dynamic Range
Control
(DRC)
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
tem.
Disc Audio
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
/PCM
PCM
Rating
Country
TV
Code
Aspect
Menu
48KHz
Language
96KHz
Scan
Progressive
Digital
Sample Freq.
Audio
Output
thanks to
possible,
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
quietest ones). Then, you may
losing clarity
at a lower volume without
listen to
a
movie
of sound. Set
DRC to On for this effect.
Others
Vocal
Sample Frequency
Set Vocal to On
To
only
DVD is
The karaoke channels
Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
change
the
playing.
mix into
a
when
a
multi-channel karaoke
on
the disc will
normal stereo sound.
PBC
Set
Playback Control (PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On or Off.
played according to the PBC.
played the same way as Audio
CDs.
Auto
You
Play
can
ically
set up the DVD
starts
If Auto
Play
search
a
play
DVD
playing
Player
so a
DVD disc automat-
whenever the DVD is inserted.
mode is set to On, this DVD player will
playback time is long most and then
title that
back the title
automatically.
On: Auto
Off:
Play function is activated.
Auto Play function is not activated.
Note
The Auto
18
Play
function may not work for
some
DVDs.
Before
Operation
DVD
-
part
Parental Control
Rating
DVD
Enter the code of
DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain
Code
Country
scenes on
the disc. These
scenes are
a
country/area
rated
country-dependent.
were
are
PREATION
Code Set
Disc Audio
AE
Disc Subtitle
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
whose standards
used to rate the DVD video disc, referring to the list
(See "Country Code List", page 37.).
Disc Menu
Rating
Country
The Parental Control feature allows
TV
Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Code
Aspect
Language
Progressive
Digital
Scan
Audio
Output
Others
Disc Audio
8
Disc Subtitle
7
Disc Menu
6
Rating
TV
Code
4
Aspect
Menu
Select
the
Code
Country
setup
using
While
2
Scan
Audio
1
Output
Unlock
Change
Country
2
step
3
4
5
6 selection,
Follow
Others
Code is
1
2
While
3
When you have not entered a password yet.
Enter a 4-digit password using the numbered but-
3
and
on
the
Setup
menu
using
the
buttons.
4
"Rating"
tons to create a
is
3 of
"Rating"
Shift the
selected,
personal 4-digit security password,
4-digit password again
tons to confirm the
Changing
pass-
4
mistake before
CLEAR and enter
pressing ENTER, press
4-digit security password again.
Select
from 1 to 8
a
rating
(1) has
tons. One
has the most
Eight (8)
using
playback restrictions.
playback restrictions.
Unlock: If you select Unlock, Parental Control is
play in full.
not active. The disc will
Ratings
played. Higher
unless
an
rated
alternative
scenes
scene
If
will not be
is available
The alternative must have the
lower
same
on
rating
played
the disc.
or a
suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
5
1/2 buttons and select
using
using
3/4 buttons.
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
).
the
4-digit
code
1
Follow
3
Enter the old code, then press ENTER.
Select "Change" using the 3/4 buttons then press
ENTER.
4
Enter the
ENTER.
Enter
time and veri-
Steps
1-2 as shown above to the left
5
new 4-digit code, then press
exactly the same code a second
fy by pressing ENTER.
6
Press SETUP to exit the
(Rating).
menu.
1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be
the 3/4 buttons.
2
the 3/4 but-
the least
using
Note
below
personal 4-digit security
left.
Confirmation of the
the code is
word, then press ENTER.
on
Press ENTER to confirm your country code
then press SETUP to exit the menu.
When you have already entered a password;
Enter a 4-digit password using the numbered but-
a
cursor
the second character
press 2.
then press ENTER. Enter the
and press ENTER to verify.
If you make
on
selected, press 2.
Select the first character
Select
"Rating"
the 3/4 buttons
menu.
3
Language
Progressive
Digital
1
5
Country
one.
no
Press ENTER to confirm your
then press SETUP to exit the
If you
If you
forget
forget
your
your
4-digit
password,
code
to clear the current pass-
word, follow the procedure below.
1
Press SETUP to
2
Use the Number buttons to enter the
display
the setup
menu.
6-digit
number
"210499".
The
3
4-digit password is cleared.
Enter
a new
code
as
shown above to the left
(Rating).
rating selection,
menu.
19
with
Operation
Playing
You will
a
only
tape
playback, Shuttle :
or still picture press F or G.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
Slow motion
tape
5 During playing back
be able to load and
eject video
cassettes
when your VCR is plugged into the mains.
Your VCR may also playback recordings from NTSC
To switch off the slow motion and shuttle, press the
desired function.
tapes (on PAL TV).
better
Getting
a
When
cassette is inserted and
a
picture
slow motion and shuttle, the noise bars may
appear on the picture according to the status of
During
playback started, the
function works to get the best
automatic
tracking
possible picture automatically. If the quality of the
recording is poor, repeatedly press TRK + or on
the remote control to manually adjust the tracking
tape.
If distortions
-
until any distortions have been removed. Press numbered 0 on the remote control to switch automatic
tracking
back
1
VCR
that you have correctly connected your
described earlier in this book.
sure
as
your TV.
Press POWER to turn
Turn
in the
seen
picture,
reduce
-.
playback.
Press EJECT.
If the end of the
tape is reached, your VCR will stop
the tape.
playback automatically, rewind, stop, eject
CM
Make
be
+ or
Press STOP to end
6
again.
on
can
them with TRK
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
normal
on
playback.
your VCR.
Insert the video cassette into your VCR.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
The video cassette should have the window side
material).
Repeatedly
facing
up and the
on
arrow
facing
away from you.
press CM SKIP to
skip:
1 Press 30 seconds
2 Press 60 seconds
2
Press PLAY to start
playing
your tape.
video cassette which has had its
3 Press 90 seconds
If you load a
record protection tab removed, playback of the
cassette will start automatically.
4 Press 120 seconds
5 Press 150 seconds
6 Press 180 seconds
AUTO TRACKING
Your VCR will
give
3
the best
automatically adjust
picture quality.
Press PAUSE/STEP to still
the
tracking
the
tape frame by frame.
If you press FORWARD, the picture will be slowed
can
be
paused
1
Press i.
2
Press 1
3
Press OK.
.
Still
picture quality can
pressing TRK + or
be
Picture
Response)
tape.
playback.
for up to 5 minutes. After 5
minutes your VCR will stop the tape to prevent
damaging the tape or your VCR
Tapes
(Optimum
automatically improves playback picture
quality by adjusting your VCR to the condition of the
a
down at about 1/19 times the normal
OPR
This feature
picture.
repeatedly to advance
Press PAUSE/STEP
to
improved slightly by
or
2 to select OPR.
-.
4
Press PLAY to continue
playing
your tape.
Picture search:
back press either FORWARD or
BACKWARD and this will enable you to rapidly
wind the tape (7 times normal playback) and see
During playing
where you
are on
FORWARD
played
or
ON
OFF
the tape.
Logic search:
During fast forwarding
rewinding press and hold
picture will be
normal playback speed.
4
or
3
or 4
VCR
TIME
DATE
SYSTEM
Dr.
OPR
i
OPR
repeatedly
to select:
OFF, SOFT
SHARP.
playing
5
20
Press
12
12
MS
Please note you may
BACKWARD the
back at 7 times
OFF
SOFT
SHARP
R
f
a
only
tape.
Press i return to
screen.
set OPR when
or
Operation
with
Instant Timer
tape
Press LP if you wish to record in
Recording (ITR)
Your VCR allows you to make
variety of simple methods:
recordings using
SP will
a
Recording (ITR) start recording
for
a set period of time or until the
immediately
Your VCR
incorporates Long Play (LP)
time
record up to 180 minutes using Standard Play (SP);
using LP you will be able to record up to 360 minutes.
Please note there will be
when
quality
as
SP.
Press REC/ITR to start
6 RECORD
which
enables you to record up to twice the amount of
time on a video cassette. For example an E-180 will
sound
produce improved picture and sound quality,
provide twice as much recording
recording.
will appear on the TV screen.
Press REC/ITR several times. Each successive
out.
runs
or
however LP will
Instant Timer
video cassette
Long Play
5 Standard Play.
a
slight
loss in
picture
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
7
recording
unwanted
scenes.
Press PAUSE/STEP to continue
and
recording.
If you press PAUSE/STEP during ITR, this unit will
enter the record pause mode and ITR is cancelled.
LP.
using
Press PAUSE/STEP to avoid
be paused for up to 5 minutes; RECP
displayed when a tape is paused. After 5
minutes your VCR will stop recording to prevent
damaging the tape or your VCR.
Tapes
can
will be
1
Make
VCR
that you have correctly connected your
described earlier in this book.
sure
as
Press POWER to turn
Insert
2 VCR.
a
on
your VCR.
video cassette with
protection
tab into your
up and the
arrow
facing
recording.
Press EJECT.
EJECT will appear
The video cassette should have the window side
facing
Press STOP to end
8
on
the TV
screen
for
a
few
seconds.
away from you.
Notes
3
Press PR
+
or
-
to select the programme number
you wish to record.
You may also directly select programme number
using the numbered buttons on the remote control.
directly from the AUDIO L/R
AV1)/ VIDEO (VCR IN AV1) or AUDIO IN
(L(MONO)/R)/ VIDEO IN terminals repeatedly press
If
you
4 (VCR
wish to record
IN
AV until the socket you wish to record from is dis-
played.
If you do not wish to record
on a tape (this can
happen quite easily by accident!) remove the
protection tab on the back edge of the video cassette.
It is possible to record on a video cassette with the
record protection tab removed by covering the hole
with self adhesive
tape.
Remember you can record one programme while
watching another by starting your instant recording,
press TV/VCR to appear TV indicator in the
window and then selecting a different channel
display
recording from AUDIO
VIDEO (VCR IN AV1) terminals
AV 1 for
L/R
on
(VCR
the
IN
rear
AV1)/
on
your TV.
of your
unit.
AV 2 for
recording
from AUDIO IN
VIDEO IN terminals
on
(L(MONO)/R)/
the front of your unit.
21
OPERATION
with
Operation
tape
recording using On Screen
Display
Timer
6
You may set up to seven timer record events within
one month of the current date.
Press the numbered buttons to enter the recording
start and end times of the programme that you wish
to record.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
You may also select the the start and end times by
pressing
Note
or 4.
3
Before setting the timer make sure that you have set
the VCR clock correctly and you know which stations
you have tuned TV stations on your VCR.
1
Insert a video cassette with protection tab into your
VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
2
Press i.
Press 1 or 2 to select REC.
Press OK.
REC
P
SET
R
Pr-12
ACMS
TIME
DATE
3
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SYSTEM
Dr.
::
--
-~
--
SP
SP
SP
SP
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
or
OKi
OPR
,
SP
PR
SP
OK i
Press 1 to delete the event.
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
--
-~
--
-~
::
--
-~
--
-~
-~
-~
::
--
-~
::
--
-~
--
--
--
SP
SP
SP
SP
SP
speed
TIME
16
1900
::
2000
SP
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
i
Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1
9, press 0 first, then the
channel number; for example Stations 3 03. You
may also select Channels by pressing 3 or 4.
Once selected press 2.
If you wish to record from AUDIO L/R (VCR IN AV1)/
VIDEO (VCR IN AV1) or AUDIO IN (L(MONO)/R)/
VIDEO IN from the back or on the front of your unit,
press AV to select for correct display (AV1 or AV2).
-
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
Press STOP to end
SP
--
-~
--
9
SP
--
::
--
SP
--
::
--
SP
--
::
--
--
Check that the timer event details are correct.
Press i twice.
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your VCR Standby.
will appear in the display window while your
VCR waits to make the recording. To watch a DVD
during timer recording standby mode, press
POWER and DVD to switch to DVD mode.
SP
--
::
--
8
SP
--
::
::
-~
i
SP
--
::
-~
--
DATE
PR-01
SP
Press OK to start setting the timer record event.
If all timer record events are full press 3 or 4 to
select the event that you wish to remove and
PR
-~
--
LP).
REC
DELETE:
--
::
SP
replace.
4
19002000
::
--
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program.
TIME
--
VCR
fOSD
ON
OFF
DATE
TIME
16
Press 2 to select the recording speed.
Press 3 or 4 to select the desired tape
(SP, IP,
--
DATE
--
i
7
PR
12
PR
PR-01
recording.
-
PR
PR-01
DATE
change.
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
Press 1 to delete the event...or
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3 or
4 to enter the correct information.
SP
SP
SP
SP
SP
SP
SP
i
5
Press the numbered buttons to enter the date of
the programme.
If you press OK before entering the date you may
select one of the following automated recording
features. Press 1 or 2 to select, then press OK to
confirm.
DLY To record every day (except Saturday and
Sunday) at the same time.
SU
SA To record at the same time every week.
~
PR
DATE
TIME
--
PR-0116---
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
::
SP
DLYSUMOTUWETHFRSA
--
--
--
--
-~
--
OK i
22
Notes
If at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press 3
or 4 to select the event that you wish to delete or
If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme
will always be given priority.
Example:
Programme
1 is
programmed
to start at 16:00 and end
Programme
2 is
programmed
to start at 16:30 and end
at 17:00.
at 17:30.
(In
but
this case, Programme 1 will be recorded in its entirety,
only the last 30 minutes of Programme 2 will be
recorded.)
Operation
Playing
with DVD and Video CD
DVD and Video CD
a
Playback Setup
Turn
on
DVD
VCD2.0
the TV and select the video
nected to the DVD
General Features
Note
VCD1.1
input
source con-
player.
features may also be available
Audio system: Turn on the audio system
and select the input source connected to the
DVD
1
Moving
player.
Press OPEN/CLOSE to open the disc
Unless stated otherwise, all operations
described use the remote control. Some
2 facing
tray, with the label
a
Press OPEN/CLOSE to close the
3 READING
starts
appears
automatically.
The
a menu screen
is
may be displayed first after
Video CD which contains a menu.
or
loading
a
DVD
Use the 1 2
3
4
buttons to select the
than
more
one
title, you
to
can move
follows:
as
num-
title/chapter
you want to view, then press ENTER to start playback.
Press TITLE or DISC MENU to return to the menu
to another CHAPTER/TRACK
a
title
on a
more
1/3
1 /12
VCD1.1
disc has
displayed
menu screen
DVD
disc has
DVD
When
appear
instead.
If
a
another title
Moving
tray.
might
DVD
Press DISPLAY, then press the appropriate
(0-9) to select a title number.
the TV screen, and playback
If playback does not start,
menu
menu.
bered button
sure
on
press PLAY.
In some cases, the disc
to another TITLE
Setup
1/3
up.
double-sided DVD is inserted, make
the side you want to play is facing down.
When
the
tray.
When
Load your chosen disc in the
on
disc has
than
chapter/track
as
Press .
or
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
>
briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
screen.
Note
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
the
operating procedures
depending on the disc.
menu
for
menu screen.
You also may set PBC to Off under setup. See page
18.
Notes
--
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
--
--
Your
player
will not
different from your
player is 2 (two).
--
To watch
a
DVD
the numbered buttons
Slow Motion
DVD
1 Press m or M
during
The
player
VCD2.0
VCD1.1
pause.
will enter SLOW mode.
2 Use the m or M to select the
required speed:
1/16, t 1/8, t 1/4 or t 1/2 (backward),
T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
or
t
T 1/16,
code must
be entered and/or the disc must be authorized
"Parental Control",
DVDs may have a
two-digit numbers, press
(0-9) in rapid succession.
menu screen.
and the exact
may differ
Follow the instructions on the each
using
For
(see
page 19).
region code.
on
Note
Slow motion
playback
in
reverse
is not
applicable
for
Video CD.
play discs that have a region code
player. The region code for this
during
timer
recording standby
mode, press POWER and DVD to switch to DVD
mode.
23
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
Frame-by-frame playback
VCD1.1
1 Press PAUSE/STEP
The
player
Video CDs
(continued)
will
now
-
Track/All/Off
Repeat
1 To repeat the track currently
The Repeat Track icon appears
press REPEAT.
playing,
on
the TV
screen.
repeat the disc currently playing, press REPEAT
2 To
a
second time.
during playback.
The
go into pause mode.
2 You can advance the
picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the remote
Repeat
All icon appears
the TV
on
screen.
Repeat mode, press REPEAT a third time.
Repeat Off icon appears on the TV screen.
3 To exit
The
control.
Note
Search
VCD2.0
DVD
1 Press m or M
The
player
will
On
VCD1.1
setup
during playback.
go into SEARCH mode.
now
2 Press m or M
to select the
required
speed: mX2, mX4, mX16, mX100 (backward)
or MX2, MX4, MX16, MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
3 To exit SEARCH
repeatedly
a
mode, press PLAY.
Video CD with PBC, you must set PBC to Off on the
menu to use the Repeat function. See page 18.
Repeat
A-B
A*
AB
To repeat
a
VCD2.0
Karaoke DVD
2 To return to normal
"NORMAL" appears
Tips
By pressing
on
the TV
screen.
press RANDOM until
the TV screen.
playback,
on
during Random playback, the unit
title (track) and resumes Random play-
back.
Time Search
only
works with DVD Karaoke discs and
play
appears
CHAPT
VCD2.0
DVD
TITLE
TRACK
VCD1.1
on-screen
ALL
OFF
-
the
an
Repeat Chapter/Title/Off
Repeat Chapter icon appears on the TV screen.
repeat the title currently playing, press REPEAT
second time.
elapsed playing time of the
seconds, press 3/4 to select the Time
on-screen
display.
seconds,
required
use
the number buttons to enter
start time. Enter
right
hours, minutes, and
sec-
in the box.
Repeat Title icon appears
on
the TV
seconds, press ENTER to confirm the start
screen.
Repeat mode, press REPEAT a third time.
Repeat Off icon appears on the TV screen.
starts from the selected time on the disc. If you enter
playback will continue from the current point.
invalid time,
3D Surround
This unit
a
can
DVD
produce
VCD2.0
a
VCD1.1
3D SUR
NORM.
3D Surround effect, which
playback from two
simulates multi-channel audio
conventional stereo
five
more
speakers, instead of the
speakers normally required to listen to
multi-
channel audio from
1 Press DISPLAY
a
or
home theater system.
during playback.
2 Press 3/4 to select "NORM." or "3D SUR".
3 Press 1/2
selected.
24
dis-
screen.
time.
The
The
The
at
The "-:--:--" appears in the Time Search box.
4 Within 10
repeat the currently playing chapter, press
3 To exit
the
onds from left to
to use the Random function. See
REPEAT.
The
during playback.
playing
current disc.
Playback
2 To
-:--:--
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
DVD Video Discs
1 To
on
The Time Search box shows the
3 Within 10
OnaVideoCDwithPBC,youmustsetPBCtoOffon
menu
0:20:09
DVD
Search icon in the
video CD without PBC.
Repeat
on
3 To cancel the sequence, press A-B.
2 Within 10
Notes
the setup
page 18.
briefly
point.
at your chosen end point.
the TV screen, and the repeat sequence
again
1 Press DISPLAY
This function
title:
The Time Search function allows you to start
any chosen time on the disc.
>
selects another
a
begins.
VCD1.1
during playback or in stop mode.
automatically begins Random Playback and
"RANDOM" appears
OFF
sequence in
2 Press A-B
1 Press RANDOM
The unit
VCD1.1
1 Press A-B at your chosen starting
A* appears briefly on the TV screen.
A B appears
Random
VCD2.0
DVD
repeatedly
until the desired sound is
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
(continued)
VCD1.1
Checking
during playback
or
still
playback
to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the
increases up to six times.
2 Use the 1 2
zoomed
3 4
buttons to
picture.
3 Press CLEAR to resume normal
the
the
through
playback
or
the contents of DVD Video
DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select
option. Or, use the 1/2/3/4 buttons to highlight your
selection, then press ENTER.
magnification level
move
return to
paused image.
1 Press TITLE.
If the current title has
screen.
zoom
The
zoom
function may not work for
function may not work on
some
DVDs.
nine
can
and subtitle
multi-angle
1
DVD
VCD2.0
menu
may appear.
options,
angles, spoken language
chapters for the title.
and
start
playback
a
1 Press DISC MENU.
memorized
point. Up
to
be memorized.
can
The disc
is
menu
displayed.
2 To remove the disc menu, press DISC MENU
mark, follow these steps.
a
DVD
Disc Menu
from
again.
VCD1.1
MARKER SEARCH
points
To enter
menu, the menu will appear on the
3 To remove the title menu, press TITLE
1/9
You
a
Otherwise, the disc
2 The menu can list camera
scenes.
Marker Search
an
DVD
Title Menu
Note
The
DVD
discs: Menus
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
Angle
DVD
again.
1/1
memorize.
The Marker icon will appear
2
Repeat step
on
the TV
If the disc contains
briefly.
screen
1 to enter up to nine Marker
points
on a
disc.
To Recall
1
a
Marked Scene
disc
During
playback,
The MARKER SEARCH
menu
will appear
on
a
the
screen.
Marker
ferent audio
scene.
Marked Scene
playback,
The MARKER SEARCH
2
3
the
display.
the Audio
Language
DVD
1 ENG
Press AUDIO
will start from the Marked
disc
on
D
SEARCH.
During
angle appears
a
5.1 CH
4 To remove the MARKER SEARCH menu, press
1
Changing
num-
3 Press ENTER.
a
camera
angles, you
change
angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
The number of the current
seconds, press 1/2 to select
ber that you want to recall.
To clear
recorded at different
to a different camera
press SEARCH.
2 Within 10
Playback
scenes
can
repeatedly during playback
language or audio track.
to hear a dif-
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(STER., LEFT or RIGHT).
VCD2.0
VCD1.1
a
dif-
ferent audio channel
press SEARCH.
menu
will appear
on
the
screen.
Press 1/2 to select the Marker number that you want
Subtitles
DVD
to erase.
Press SUBTITLE
Press CLEAR.
different subtitle
ABC
1 ENG
repeatedly during playback
languages.
to see the
The Marker number will be erased from the list.
4
Repeat steps
2 and 3 to erase additional Marker
numbers.
5
To
remove
the MARKER SEARCH menu, press
Note
If
appears, the feature is not available
on
the disc.
SEARCH.
25
OPERATION
Operation
with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
CD
MP3
The DVD
Notes
MP3/WMA
Insert
1
Recordings
a
files that have
The
player
tray.
About
CD; Audio CD menu appears on the TV
go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
screen
MP3/WMA Disc
limited
Press 3/4 to select the MP3/WMA then press
ENTER.
appears on the TV screen.
to the MP3/WMA-JPEG
1.
2.
3.
4.
Program
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Clear All
Folder8
5.
OFF
0:00:00
as
a
folder, and ENTER.
Press 3/4 to select
a
track then press PLAY
3 A list of files in the folder appears.
Media
or
compatibility
move
to the
previous page.
Program
MP3 WMA
Program
TRACK02
TRACK 1.mp3
TRACK03
TRACK 2.mp3
CD Creator", which creates an ISO9660 file system.
single session disc requires MP3/WMA files in the
TRACK 4.mp3
TRACK05
TRACK06
TRACK 6.mp3
TRACK07
TRACK 7.mp3
Clear All
Clear All
TRACK 8.mp3
0:00:00
1
MP3/WMA
OFF
the
5
in
26
a
34 to
previous
To
or use a new one.
names
should be named
incorporate ".mp3"
or
using
or
8 letters
file list and want to return to the Folder list,
and press ENTER to return to
highlight
menu screen.
stop playback
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
This DVD
player requires discs/recordings
to meet
certain technical standards in order to achieve
Pre-recorded DVDs
are
optimal
automatically
at any other
types
(including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
required
permission
time, press STOP.
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
grant such permission. Permission should
to
are
the
File
Customers should also note that
menu
Tip
If you
MP3/WMA file in the 1st
of recordable disc formats
TRACK 5.mp3
menu
no
set to these standards. There are many different
TRACK 3.mp3
TRACK04
Audio CD
is
A
playback quality.
TRACK01
NORM.
player
to the next page.
move
Press DISC MENU to
STER.
with this
-
e.g. "********.MP3"
the current track's elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
0: 56: 18
offers double the audio
the MP3 format.
follows:
and must
Playback starts.
During playback,
use
6.
ENTER.
TRACK08
Audio)
compression
Sampling Frequency / only at 44.1kHz (MP3),
(WMA)
Bit rate / within 32 320kbps (MP3),
32-128 kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "Easy-
the disc
CD
Audio)
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
Press 3/4 to select
Press TITLE to
Media
Microsoft audio
first track. If there is
4
".mp3".
22.05-44.1 kHz
move
MP3 WMA
a
technology.
WMA(Windows
compression of
JPEG
menu
not read an MP3 file that has a file
WMA(Window
An WMA file is
MP3 WMA
Press RETURN to
choice menu.
can
extension other than
disc and close the
The MP3/WMA
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
MPEG1 audio
right.
on
Audio
2
Recordings
An MP3 file is audio data
MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on
play
can
MP3/WMA
About MP3
WMA
Player
on
always
be
sought
from the
copyright
owner.
right
with Audio and MP3/WMA Disc
Operation
CD
Pause
MP3
1 Press PAUSE/STEP
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
or
To repeat
1
press
CD
another Track
MP3
WMA
Press . twice
track.
case
briefly
to
step back
to the
previous
of audio CD, to go directly to any track, enter
using the numbered buttons (0-9)
during playback.
Repeat Track/All/Off
CD
MP3
WMA
"
appears
on
the
at your chosen end
menu screen.
point.
Repeat icon and "A B" appears on the menu
and the sequence begins to play repeatedly.
repeat all tracks
on a
disc, press REPEAT
"ALL" appears
on
the
a
MP3
3D Surround
This unit
produce
can
on
the
play,
press
menu screen.
CD
a
3D Surround effect, which
speakers normally required
multi-channel audio from
a
or
to listen to
home theater system.
1 Press DISPLAY or AUDIO
3 Press 3/4
during playback.
repeatedly
until the desired sound is
selected.
menu screen.
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.
CD
Repeat icon and "OFF" appears
screen,
2 Press 1/2 to select "NORM." or "3D SUR".
second time.
Repeat icon and
3 To exit the sequence and return to normal
A-B again.
more
screen.
Search
again
press A-B at your chosen start*
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five
1 To repeat the track currently playing, press REPEAT.
The Repeat icon and "TRACK" appears on the menu
The
Repeat icon and "A
2 Press A-B
The
the track number
2 To
sequence.
The
Press . or > briefly during playback to go to the
next track or to return to the beginning of the current
track.
In
a
CD
During disc playback,
ing point.
The
Moving to
A-B
Changing
the Audio Channel
CD
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
WMA
1 Press m or M during playback.
The player will now go into SEARCH mode.
2 Press m or M
repeatedly to select the required
speed: mX2, mX4, mX8 (backward) or MX2,
MX4, MX8 (forward).
Search speed and direction
are
indicated
on
the
menu
screen.
3 To exit SEARCH
Random
mode, press PLAY.
CD
1 Press RANDOM
MP3
WMA
during playback
or
when
playback
is
stopped.
The unit automatically begins Random
"RAND." appears on the menu screen.
2 To return to normal
repeatedly
Playback
and
playback, press RANDOM
disappears on the menu
until "RAND."
screen.
27
OPERATION
Operation
Viewing
with JPEG Disc
JPEG disc
a
JPEG
Player can play discs with JPEG files and
Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
This DVD
1
Insert
disc and close the
a
TV
to another File
Press .
or
>
once
advance to the next file
1 Press PAUSE/STEP
menu
appears
on
during viewing a picture
to the previous file.
to
or
Still Picture
tray.
The MP3/WMA-JPEG choice
Moving
the
screen.
slide show.
during
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
The
player
will
now
MP3 WMA
To
JPEG
2
Press 3/4 to select the JPEG then press
ENTER.
The JPEG
menu
appears
on
the TV
screen.
flip the picture
Press 3/4 during showing a picture
picture horizontally or a vertically.
To rotate
Press 1/2
JPEG
picture
Folder1
Folder2
to
flip
the
picture
during showing
clockwise
or
a
picture
to rotate the
counter clockwise.
Folder3
Folder4
Folder5
Notes
Folder6
Folder7
on
JPEG
Recordings
Folder8
Slide
Depending
Off
Speed
upon the size and number of the JPEG
a long time for the DVD player to
files, it could take
Press 3/4 to select
and ENTER.
3 A list of files in the folderfolder,
appears.
Press RETURN to
choice menu.
a
move
to the MP3/WMA-JPEG
If you
"
"
in
a
file list and want to return to the Folder
the 34 buttons
on
the remote to
highlight
and press ENTER to return to the
previous
menu screen.
If
want to view
you
4 highlight
a
particular file,
file and press ENTER
the file proceeding starts.
a
or
Viewing
During viewing a file, press RETURN
the previous menu (JPEG menu).
Press TITLE to
press 3/4 to
PLAY.
to move to
Picture1.jpg
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
1024X768
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
Tip
are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Press 1/2 to highlight the Slide
There
Speed
then press 3/4 to select the
option
you want to
use, and press ENTER.
To
at
other
viewing
any
5 Thestop
JPEG
appears.
menu
28
---
reduce the resolution of the JPEG files
pixels
and burn another disc.
on
the disc should
be less than 650.
Some disc may be incompatible due to different
recording format or condition of disc.
When you are using software such as "Easy CD
Creator" to burn the jpeg files into the CD-R, ensure
that all the selected files have the ".jpg" extensions
when
copying
rename
File
move
Folder1
5/32
big
into the CD
layout.
If the files have
to the next page.
Press DISC MENU to move to the previous page.
JPEG
too
Total number of files and folders
are
use
are
to less than 2 mega
Tip
list,
read the disc's contents. If you don't see an ondisplay after several minutes, some of the files
screen
time, press STOP.
them
".jpg" extension will not be able to
player. Even though the files are
JPEG image files in windows explorer.
names
be read
shown
by
as
".jpe" or ".jpeg" extensions, please
as ".jpg" files.
without
this DVD
Programmed Playback
CD
VCD2.0
with Audio CD
Programmed Playback
VCD1.1
function enables you to store your favorite
tracks from any disc in the player memory.
Program
Program
with Video CD
Note
On
a
setup
Video CD with PBC, you must set PBC to Off on the
menu to use the Program function. See page 18.
contain 30 tracks.
can
Press PROGRAM
1
WMA
Programmed Playback
and MP3/WMA disc
The
MP3
mode to enter the
during playback or in
Program Edit mode.
the
E
The
mark will appear to the right of the word
on the right side of the menu screen.
stop
Program
Insert Video CD and close the
1
2
Press PROGRAM while
The VCD
Program
menu
is
playback
stopped.
will appear.
Program
VCD
OPERATION
tray.
E
TRACK 1
TRACK 2
Note
TRACK 3
Press PROGRAM to exit the
Program
TRACK 4
Edit mode;
TRACK 5
TRACK 6
E
the
mark will
Select
2
disappear.
TRACK 7
track, then press ENTER
a
selected track
the
on
Clear All
TRACK 8
to
place
the
list.
Program
Note
2 to
Repeat step
Program list.
3
place
E
Program
CD
additional tracks
the
Program
MP3 WMA
TRACK 1
TRACK 12
TRACK 2
TRACK 8
TRACK 1.mp3
TRACK 2.mp3
TRACK 3
TRACK 10
TRACK 2.mp3
TRACK 4.mp3
TRACK 4
TRACK 3
TRACK 3.mp3
TRACK 6.mp3
TRACK 7
TRACK 7.mp3
TRACK 8.mp3
Clear All
TRACK 8
STER.
0: 56: 18
Audio CD
NORM.
0:00:00
Clear All
To repeat the track
programmed track you selected last is highlighted
on
5 playing.
the TV
PROGRAM.
screen.
Tracks
currently playing,
press REPEAT.
on
the
menu
screen.
To repeat all tracks on the program list, press
REPEAT a second time.
Repeat icon and "ALL" appears on the menu screen.
Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.
move
Press PLAY to start.
6 Playback begins
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
stops after all of the tracks
Playback
played
have
playback,
on
the
Program
list
normal
playback
from
programmed
Program
press PROGRAM to exit the
mode;
the
Erasing
a
E
mark will
track of CD
disappear
(or MP3/WMA) list
and
and then
press ENTER.
"PROG." indicator disappears
on
the
Track from
Program
List
1 Press PROGRAM
MP3/WMA disc
Program
once.
resume
a
from
To cancel
to the next page.
Press DISC MENU to move to the previous page.
select
with
left.
The
Press TITLE to
Edit
on
Repeat icon and "TRACK" appears
The
Press 3/4 to select the track you want to start
7
on
menu.
"Programmed Playback
normal
Repeat Programmed
menu
the program list.
To
resume
"NORMAL" appears
Press 2.
The
2-6 of
Program
OFF
3
MP3/WMA
menu
steps
PROGRAM to exit the
Audio CD and MP3/WMA disc"
To
TRACK 5.mp3
TRACK 6
Follow
or
playback
4 programmed playback,
press
TRACK 3.mp3
TRACK 4.mp3
Press RETURN
3
E
TRACK 8.mp3
TRACK 5
4
on
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to move to the
Program
list.
3 Use 3/4 to select the track that you wish to erase
from the
Program
list.
4 Press CLEAR.
The track will be erased from the
menu screen.
Erasing
1 Follow
List"
as
the
Program list.
Complete Program
steps
1-2 of
"Erasing
a
List
Track from
Program
above.
2 Use 3/4 to select "Clear
The
All", then press ENTER.
complete Program for the disc will be erased.
The programs
are
also cleared when the disc is removed.
29
Additional
On Screen
Operation
-
VCR part
Video Doctor
Display
You may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your VCR will appear on the TV screen. If a recording
is taking place these On Screen Displays will not be
recorded onto the tape.
(Self-Diagnosis)
This feature informs you that there is a problem with
error messages will appear on the TV
your VCR. These
screen.
1
Press i.
Press 1
or 2
to select Dr.
Press OK.
1
Press CLK/CNT to
Press CLK/CNT
display.
repeatedly
to
cycle through
the
The tape counter and amount of
tape left will appear if there is a tape loaded.
display options.
12
REC
majority of the On Screen
leaving only the clock or tape
After 3 seconds the
2 Displays
will clear
counter and the amount of
tape left
the
on
P
SET
R
Pr-12
ACMS
TIME
DATE
SYSTEM
VCR
VCR
Dr.
Dr.
fOSD
ON
OFF
OKi
OPR
screen.
VCR
Press CLK/CNT
the TV
again
to remove all
displays
from
Dr.
VIDEO DOCTOR
HEAD STATUS
screen.
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
OK
Tape Counter Memory Stop
The
Digital Tape
Counter
i
be displayed on the display
by pressing CLK/CNT on
Digital Tape Counter indicates
recordings on the tape.
can
window instead of the time
the remote control. The
the relative
1
positions
of
O
recording.
will display the
playback
or
actual
play
time in
recording
is
complete.
The control buttons on the front of the unit can be
switched off so that your unit can only be operated
using the remote control.
Press LOCK.
will appear in the display window.
None of the buttons on the front of your unit will
work.
the front of your unit
display
are
window for
a
pressed
few
seconds.
2
Press LOCK
30
will
again to switch off the child
disappear in the display window.
lock.
tape with its protection tab in place
2Shows
the number of timer
recording.
PR-01 26 10:00~11:00SP
Shows the current status of timer
3
Child Lock
a
NEXT TIMER PROGRAMME
O
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
will flicker in the
NOT RECORDABLE:
NO. OF TIMER PROGRAMME
O
Press BACKWARD.
on
problem.
PLEASE CLEAN:
Insert
start
Press STOP when
If any buttons
to check a
TAPE STATUS
The tape counter
hours, minutes and seconds.
1
3 or 4
HEAD STATUS
Clean your video heads.
Press CLEAR to set the counter to 0:00:00.
or
Press
O
Press CLK/CNT.
Press PLAY
2
2
Press i.
recording.
Additional
Operation
Hi-Fi Stereo Sound
Your VCR will record and
-
VCR part
System
playback
Hi-Fi stereo sound.
This allows you to record and playback the sound in
several different ways. Video cassettes recorded on
your VCR will have a normal mono audio track and two
VHS Hi-Fi stereo audio tracks. These stereo tracks
OPERATION
allow you to make audio recordings in Hi-Fi stereo or
bilingual mode from a TV broadcast, stereo audio system,
video disc or another Hi-Fi VCR.
1
Your VCR allows you to enjoy broadcasts with standard stereo, bilingual and mono sound. The particular type of sound received or that recorded will be
briefly displayed on the TV screen for a couple of
seconds:
STEREO
Sound is
and
automatically
mono
recorded
the Hi-Fi stereo
on
tracks of the video tape.
BIL
Both audio channels will be recorded
stereo tracks. The
will be recorded
on
primary language
the
mono
on
the Hi-Fi
channel
(left)
track of the video
tape.
MONO
The sound is recorded
mono
on
the Hi-Fi tracks and the
track of the video tape without any
Press AUDIO
repeatedly
separation.
until the desired audio
2
mode appears.
3
The choice is STEREO, LEFT, RIGHT and MONO.
In BIL playback the primary language is output on
the left channel and the
secondary
channel is out-
put simultaneously from the right channel when
audio output is set to STEREO. The primary language will be output from both channels when the
audio
setting
is MONO.
Please note that when
adjusting
the
tracking
control
Hi-Fi stereo sound may revert to MONO.
31
Additional
Operation
Last Condition
DVD
This
CD
player
-
DVD
part
Video Mode
Memory
VCD1.1
memorizes the
If you load
a
user
settings
ering
for the last disc
disc that has its
settings
VCD2.0
VCD1.1
playback picture may be flickon straight lines. That
interpolation or De-interlace is not
Dot Crawl is shown
Vertical
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
memo-
video mode.
To
the video mode, press and hold DISPLAY
during disc playback. The new video
change
about 3 seconds
Notes
--
or
means
rized, the latest stop position is automatically recalled.
--
DVD
With certain discs, the
that you have viewed. Settings remain in memory even
if you remove the disc from the player or switch off the
player.
Setting
displayed on the TV screen.
quality has improved. If not,
procedure until picture quality is
mode number selected is
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
Check whether the video
repeat the above
improved.
it.
Video mode sequence:
MODE1
Screen Saver
The
screen saver
DVD
Player
in
picture
→
MODE2
→
MODE3
→
MODE1
If you turn off the power, the video mode will return to
initial default state (MODE1).
appears when you leave the
stop mode for about five minutes.
Detailed
MODE1
The
Description
of each Video Mode
material of the DVD video
(film material
material) is determined from disc information.
MODE2 : Suitable for playing film based content or video
based material recorded by the progressive scan method.
MODE3 : Suitable for playing video based content with comparatively little motion.
or
:
source
video
Note
The video mode
setting only works when
Progressive Scan mode is set to "On" on
menu.
32
the
the setup
Special Recording
Copying
from DVD To VCR
This unit allows you to copy the contents of
VHS tape with a press of the COPY button.
Recording from
a
DVD to
a
sure
setup
recorder
With this video recorder you
an external source, such as
recorder
Note
Be
"Progressive Scan"
to set
protected,
make
recordings
from
from another video
camcorder.
to "Off" on the
Note
to copy is copy
you may not be able to copy the disc.
attempting
are
In the
following description, this video recorder will be
recording and will be referred to as VCR
The other appliance will be used for playback and
one
2
or a
can
copying
menu.
If the DVD you
1
another video
used for
Insert Disc
B.
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
will be referred to
Insert VHS
Insert
3 Copy
a
1
Tape
blank VHS
videotape
the DVD to VHS
Press the COPY button
Tape
on
the unit front
panel
or
If the DVD disc
press the
Play
menu
button
appears, you may need to
manually
to
VCR A.
VCR A should be connected to the AUDIO L/R
(VCR
panel
IN
AV1)/VIDEO (VCR
IN
AV1)
on
the
rear
of your unit or AUDIO IN (L(MONO)/R) /
VIDEO IN on the front panel of your unit.
into the VCR deck.
press the REC/ITR button.
The DVD will go into Play mode and the VCR will
go into Record mode.
as
Insert the recorded tape into VCR A and
into VCR B.
2 tape
a
blank
Press AV until the socket you wish to record from is
3 displayed. (VCR B)
begin copying.
recording from AUDIO
(VCR IN AV1) terminals
AV 1 for
L/R
VIDEO
on
(VCR
the
IN
rear
AV1)/
of your
unit.
Note
If you press the REC/ITR button, be
DVD mode.
the
sure
end the copy.
You must stop the
Copy
the DVD movie ends,
record over and over
or
recording
from AUDIO IN
VIDEO IN terminals
To start
Process
Copy
4 Stop
When the
is finished playing, press STOP
DVD
AV 2 for
this unit in
to
process manually when
the unit may replay and
4 and
5
on
press the REC/ITR
VCR A.
recording,
PLAY
on
(L(MONO)/R)/
the front of your unit.
When you want to finish
on both video recorders.
copying,
on
VCR B
press the STOP
again.
33
OPERATION
Controlling
You
can
Your TV with the
control the sound level,
switch of your LG TV with the
input source, and power
supplied remote control.
Controlling
can
control your TV
using
the buttons below.
other TVs with the remote
control
You
You
Remote Control
Supplied
can
control the sound level,
input
source, and
power switch of non-LG TVs as well. If your TV is listed
in the table below, set the appropriate manufacturer
code.
1.
While holding down TV POWER button, press
the number buttons to select the manufacturer
code for your TV
2.
TV Control
Buttons
(see
the table
below).
Release TV POWER button.
Code numbers of controllable TVs
If
more
them
than
one
code number is listed, try
entering
at a time until you find the one that works with
one
your TV.
By pressing
You
TV POWER
Turns the TV
TV AV
Switch the TV's
can
on or
Code Number
LG / GoldStar
1
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
input
2
source
input
Notes
your TV, some or all buttons may not
the TV, even after entering the correct
manufacturer code.
Depending
sources.
TV PR +/--
Scans up or down through
memorized channels.
TV VOL +/--
Adjust
MUTE
Turns
the volume of the TV.
off TV sound
function
on
on
If you enter
previously
a new
code number, the code number
entered will be erased.
When you replace the batteries of the remote, the
code number you have set may be reset to the
default
again.
34
(Default),
off.
between the TV and other
on or
Manufacturer
setting. Set
the
appropriate
code number
Troubleshooting
Check the
following guide
for the
possible
cause
VCR do not
DVD
or
properly.
a
before
problem
service.
contacting
Cause
Symptom
work
of
DVD
or
Correction
VCR button is not switched
Refer to page 2.
properly.
No power.
The power cord is disconnected.
Plug the power
securely.
The power is on, but
the DVD player does
not work.
No disc is inserted.
Insert
No
The TV is not set to receive DVD
picture.
signal
a
Select the
the TV
player
Progressive Scan
is set to "On"
menu
on
a
signal output.
The audio cables
are
not connected
not start
Progressive Scan
(see page 17).
screen.
the audio cable.
is set to the
The disc is dirty.
The TV channels
An
unplayable
The disc is
are
Turn
on
the
equipment
jacks
connected with
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
not tuned in
properly.
Clean the disc.
Check tuning, carry out
Insert
tuning again.
playable disc. (Check
type and Regional code.)
disc is inserted.
placed upside
to "Off"
Connect the audio cable into the
The power of the equipment connected
with the audio cable is turned off.
Digital Audio Output
position.
jacks
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
securely.
The
player does
playback.
Set
securely.
wrong
The DVD
the TV
Connect the video cable into the
The equipment connected with the
audio cable is not set to receive DVD
is poor.
on
securely.
but is connected to
standard(analog) television.
picture
appears
securely.
The
The
appropriate video input mode
the picture from the DVD
so
The video cable is not connected
the setup
No sound.
disc.
on
output.
cord into the wall outlet
Place the disc with the
down.
the disc
a
playback
side
down.
The disc is not
The remote control
does not work
properly.
placed
within the
Place the disc on the disc tray
inside the guide.
The disc is
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
the rating level.
Rating
There is an obstacle in the path of the
remote control and this unit.
Remove the obstacle.
The batteries in the remote control
exhausted.
Replace
Video tape cannot be
inserted.
Is the cassette compartment
No Hi-Fi sound
Audio mode is not set
Video Head
guide.
are
empty?
properly.
Eject
the batteries with
or
correctly
change
new ones.
the tape in.
Select "STEREO" by repeatedly
"AUDIO" on the remote control.
pressing
Cleaning
Whenever a video cassette is inserted into or ejected from your VCR the video head is automatically cleaned.
This should mean that additional head cleaning should not be necessary.
However dirt accumulating on the head after a long period of time can cause the playback picture to become blurred
or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged
tapes might.
35
REF NC
Language Code
Enter the
(See
appropriate
17).
List
code number for the initial
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
36
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country Code" (See
page
19).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and Barbuda
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
CI
Ivory Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
Territory
OM
Oman
UY
Uruguay
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape Verde
JP
Japan
PL
Poland
VI
Virgin Islands (British)
Virgin Islands (USA)
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Anguilla
Kingdom
Outlying
Islands
Miquelon
City State
Grenadines
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman Islands
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
Republic
(French)
37
REF NC
Specification
General
Power
requirements
Power
consumption
Dimensions
Mass
AC 110-240V, 50/60 Hz
19W
430 X 78.5 X 270
(approx.)
4.2
(approx.)
(w/h/d)
mm
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
display tape
RF Modulator
UHF 22
68
-
(41˚F
to
95˚F)
(Adjustable)
System
Laser
Semiconductor laser,
Video Head system
Double azimuth 4 heads, helical
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
wavelength
650
nm
scanning.
CD:8Hzto20kHz
ratio
Signal-to-noise
(ANALOG OUT
More than 100dB
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
connectors
only)
(DVD)
(CD)
Inputs (VCR)
Audio
-6.0dBm,
more
Video
1.0
75 ohms, unbalanced
Vp-p,
than 47 kohms
Outputs (DVD)
VIDEO OUT
1
S-VIDEO OUT
Vp-p
75 ohms, sync
negative
(Progressive Scan)
(Y)
Vp-p
negative sync., Mini Din 4-pin
0.3
75
ohms
(C)
Vp-p
(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Audio output
(coaxial audio)
0.5V(p-p),75Ω,RCAjackx1
Audio output
(optical audio)
3 V
Audio output
(analog audio)
2.0 Vrms
1.0
COMPONENT VIDEO OUT
75 ohms,
(p-p),
75
Ω, Optical
(1 KHz,
0
dB),
connector
600
x
x
1
1
Ω, RCA jack (L, R)x2
Outputs (VCR)
Audio
-6.0dBm, less than 1 kohms
Video
1.0Vp-p,
Design
and
specifications
are
Manufactured under license from
subject
to
change
75 ohms, unbalanced
without notice.
Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol
Laboratories.
"DTS" and "DTS Digital Out"
38
are
trademarks of
Digital Theater Systems,
Inc.
are
trademarks of
Dolby
P/NO
:
3834RV0012J
Download PDF