LG | VK661WK | LG VK661WK Owner’s Manual

DVD PLAYER/
Hi-Fi STEREO
KARAOKE
VIDEO CASSETTE
PLAYER
OWNER'S MANUAL
MODEL
:
VK661WK
PAL
Before
connecting, operating
or
adjusting this product,
carefully and
read this instruction booklet
please
completely.
Safety Precautions/Important
notes on
controlling
CAUTION
Notes
(OR BACK)
discs.
NO USER-SERVICEABLE PARTS INSIDE
This
REFER SERVICING TO QUALIFIED SERVICE
with arrowhead
within
symbol
is intended to alert the
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
to constitute
magnitude
a
product incorporates copyright protection technology that
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
is
PERSONNEL.
lightning flash
equilateral triangle
law to copy, broadcast, show, broadcast
play in public, or rent copyright material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
OF ELECTRIC SHOCK
This
copyrights:
by
via cable,
CAUTION: TO REDUCE THE RISK
DO NOT REMOVE COVER
on
It is forbidden
RISK OF ELECTRIC SHOCK
DO NOT OPEN
this unit
risk of electric
shock to persons.
SERIAL NUMBER: The serial number is found
on
the back of
this unit. This number is
The exclamation mark within
equilateral triangle
an
is intended to alert the
user to the presence of
and maintenance (servicing)
important operating
instructions in the literature
accompanying
the
product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
DO NOT EXPOSE THIS PRODUCT TO
SHOCK,
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
LASER PRODUCT
KLASSE 1
LASER PRODUKT
Features:
KLASS 1
LASER APPARAT
PRODUIT
?
Watch
recording
?
Remote controls both DVD and VCP decks.
?
To
Digital
ensure
manual
Video Disc
proper
carefully
use
Player employs
of this
Use of
controls, adjustments
specified
Laser
product, please
and retain for future
require maintenance, contact
see service procedure.
other than those
a
read this
owner 's
reference, should the unit
authorized service location-
an
or
System.
the
performance
of
procedures
herein may result in hazardous
radiation exposure.
To
prevent direct exposure
to laser
beam, do
not
try
CAUTION: The
apparatus shall
or
such
vases, shall be
as
splashing
and that
dripping
the
TV show to the VCP.
a
(unless
DVD is copy
protected
notes on
controlling
this
unit
This unit
uses one
set of controls to
operate both DVD
and VCP. The
following buttons are helpful
successfully controlling each part.
1
2
in
POWER Button
Press the POWER button
front
exposed to water,
objects filled with liquids,
on
VHS
Macrovision).
Important
not be
no
placed
DVD while
or
Hi-Fi Stereo VCP.
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
a
Records from DVD to VHS
with
?
This
audio CDs
to
LASER
CAUTION:
play DVD, VCDs,
Complete versatility
Tapes.
LUOKAN 1 LASER LAITE
CLASSE 1
___________________________________
___________________________________
?
RAIN OR MOISTURE.
CLASS 1
panel
to turn
on
the remote control
or
on
this unit.
on
the remote control when you
DVD Button
Press DVD button
want to control the DVD.
The DVD indicator will
apparatus.
display
3
light
on
the front
panel
to show that the DVD is selected.
VHS Button
Press the VHS button
on
the remote control when
you want to control the VCP.
The VHS indicator will
display
4
light
on
the front
panel
to show that the VCP is selected.
DVD/VHS Button
Press the DVD/VHS button
toggle
2
to
on
the front
panel
control between the DVD and the VCP.
to
Contents
Introduction
SafetyPrecautions.........................2
2
Important notes on controlling this unit.
.
.
.
.
.
.
.
.
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Operation with Audio CD and MP3/WMA Disc
PlayinganAudioCDandMP3/WMADisc.
NotesonMP3/WMARecordings.
.
.
.
.
20-21
.
.
.
.
.20
.20
Pause.............................21
.
.
.
.
.
.
.
MovingtoanotherTrack...............21
RepeatTrack/All/Off...................21
Precautions.............................5
NotesonDiscs..........................5
Search.............................21
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
RepeatA-B.........................21
RemoteControl............................7
RearPanel................................8
.21
ChangingtheAudioChannel.
OperationwithJPEGDisc...................22
ViewingaJPEGdisc.....................22
MovingtoanotherFile.................22
.
.
.
.
.
.
.
.
.
.
.
.
Preparation
Connections............................9-10
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
BeforeOperation-VCPpart.................11
Howtousingthemainmenu...............11
.12-15
BeforeOperation-DVDpart.
GeneralExplanation......................12
On-ScreenDisplay.......................12
InitialSettings........................13-15
Initial Settings General Operation.
13
Language..........................13
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................13
Sound.............................14
Others............................14
ParentalControl......................15
Operation
OperationwithTape.......................16
Playingatape..........................16
.16
CM(CommercialMessage)Skip.
.16
OPR(OptimumPictureResponse).
.17-19
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............17
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
GeneralFeatures........................17
MovingtoanotherTITLE...............17
17
Moving to another CHAPTER/TRACK
.
.
.
.
.
SlowMotion.........................17
Still Picture and Frame-by-Frame Playback
18
Search.............................18
Random...........................18
.
.
.
.
Repeat............................18
RepeatA-B.........................18
TimeSearch........................18
3DSurround........................18
Zoom..............................19
MarkerSearch.......................19
SpecialDVDFeatures....................19
TitleMenu..........................19
DiscMenu..........................19
CameraAngle.......................19
.19
ChangingtheAudioLanguage.
.19
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles...........................19
Random...........................21
3DSurround........................21
.
.
.
.
.
.
.
.
.
.
StillPicture.........................22
Toflipthepicture.....................22
Torotatepicture......................22
.22
NotesonJPEGRecordings.
ProgrammedPlayback.....................23
Programmed Playback with Audio CD
.
.
.
.
.
.
.
.
.
.
.
andMP3/WMAdisc.........................23
.23
ProgrammedPlaybackwithVideoCD.
.23
RepeatProgrammedTracks
.23
ErasingaTrackfromProgramlist.
23
Erasingthe CompleteProgram list.
.24
AdditionalOperation-VCPpart.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
OnScreenDisplay.......................24
TapeCounterMemoryStop................24
.24
VideoDoctor(Self-Diagnosis).
Hi-FiStereoSoundSystem................24
.25
AdditionalOperation-DVDpart.
LastConditionMemory...................25
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ScreenSaver...........................25
26
Special Operation-Karaoke function.
Beforeyoustartkaraoke.....................26
Karaokesing-along.........................26
Gradingyoursinging........................26
SpecialRecording.........................27
CopyingfromDVDtoVCP.................27
.27
Recordingfromanothervideoplayer
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Reference
Troubleshooting..........................28
LanguageCodeList.......................29
CountryCodelist.........................30
Specification.............................31
About the
symbols
Indicates hazards
itself
or
for instructions
likely to cause
damage.
harm to the unit
other material
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
3
INTRODUC
Before Use
Disc-related terms
Discs
Playable
Title
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
Chapter (DVD only)
Sections of a picture
Audio CD
(8cm/12cmdisc)
can
play
audio titles, MP3, WMA
or
CD-RW that contains
or
feature content
or a
musical
piece
that
are
smaller
than titles.
DVD-R, DVD±RW,
a
Kodak PICTURE CD and CD-R
accompanying
or
additional feature content, or music album. Each title
is assigned a title reference number enabling you to
locate it easily.
Video CD
In addition, this unit
(DVD only)
DVD
JPEG files and SVCD also.
A title is
composed of one or several chapters. Each
assigned a chapter number, enable you to
locate the chapter you want. Depending on the disc, no
chapters may be recorded.
is
chapter
Notes
--
Depending
ment
some
or
--
the conditions of the
CD-R/RW
played
--
on
recording equip(or DVD-R/±RW) disc itself,
(or DVD-R/±RW) discs cannot be
the CD-R/RW
on
CDs
irregular shaped
octagonal). It may result in
or
use
Notes
on
(Video
Sections of
(the
(e.g., heart-shaped
malfunctions.
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be avail-
On
Regional
player
player is designed and manufactured
for playback of region "5" encoded DVD soft5
ware. The region code on the labels of some
DVD discs indicates which type of player can play those
discs. This unit can play only DVD discs labeled "5" or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
4
on a
a
video CD
track number,
video CD with PBC
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
Types
There
of video CDs
are
two
with the
This DVD
only)
piece
assigned
musical
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
Video CDs. Some DVDs made for business purposes
may not be played on the unit.
and DVDs
or a
Scene
Video CDs
code of the DVD
CD and audio CD
picture
you to locate the track you want.
or other functions may be added.
Refer also to the instructions applied with the DVDs and
able,
a
audio CD. Each track is
or an
enabling
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
Track
PBC
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
Video CDs not
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Cont'd)
Precautions
Storing
After
the unit
Handling
discs
playing,
store the disc in its
case.
When
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
The
light,
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
the unit
setting
picture and sound of a nearby TV or radio may be
distorted during playback. In this case, position the unit
The
away from the TV or radio,
removing the disc.
To
keep
Do not
near
or
turn off the unit after
volatile
liquids,
such
as
leave marks
on
a
long period
ter out.
plastic products in
of time. They will
the surface.
To clean the cabinet
soft, dry cloth. If the surfaces
soft cloth
are
moistened with
lightly
solution. Do not
benzine,
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
the unit
Cleaning
a
discs
insecticide spray,
the unit. Do not leave rubber of
use a
Cleaning
temperature
the surface clean
use
contact with the unit for
Use
as there may be a considerable
increase inside the car.
a
extremely dirty,
detergent
mild
strong solvents, such as alcohol,
thinner, as these might damage the surface
or
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
records.
vinyl
use
About
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
5
INTRODUC
Front Panel and
Window
Display
Tape Eject
Forward
Skip/Scan,
Fast-Forward
(
)
chapter/track.
Go to NEXT
Press and hold for two seconds for
fast forward search.
a
Winds the
tape forwards.
PLAY
Starts
( G)
playback.
Reverse
Go to
DVD OPEN/CLOSE
Opens
or
closes the disc
Disc
Insert
DVD to VHS
a
(
)
tray.
Skip/Scan, Rewind (
)
beginning of current chapter/track or
to PREVIOUS chapter/track.
Press and hold for two seconds for
reverse
Tray
Rewinds the
disc here.
Copy
Button
POWER
PAUSE(
)
playback temporarily /
repeatedly for frame-by-frame
playback.
DVD/ VHS Indicator
OFF.
Tape Compartment
Display
STOP(A)
Stops playback.
window
Shows the current
MIC IN 1/2
status of the unit.
MIC VOL
ECHO VOL
TRACKING
TITLE
PROG.
(D /E)
(D /E)
(D /E)
Programmed playback
VCP Record
Remote Sensor
DVD/VHS
Point the remote control here.
Selector
Indicates current title number
MP3
CHP/TRK
Indicates current
chapter
or
track number
active
VCP
MP3 disc inserted
recording
is
engaged
Indicates total
ANGLE active
playing time/elapsed
time
DVD to VHS copy is in progress
Karaoke indicator
Indicates
tape.
Pause
Switches the unit to
or
fast
/
press
ON
a
search
The Hi-Fi track of
repeat mode
a
VHS
tape is playing
CD Audio CD inserted
DVD DVD inserted
VCD Video CD inserted
Cassette-In indicator
The VCP Record
Speed
or
AB
PROG. TITLE
CHP/TRK
REC
CDREC
HI-FI
ALL MP3
VCD
DVD
6
SP
LP
LP
is set to SP
Remote Control
DVD/VHS select button
Selects
operational
OPEN/CLOSE
EJECT
Open or close the disc
mode of remote
control.
-
POWER
Switch this unit ON
or
-
DISC MENU
Access menu of
OFF.
DISPLAY
Display.
FGDE(left/right/up/down)
Select
an
item in the
DVD disc.
REC
Record your input sources into tape.
?
Forward SKIP/SCAN (
)/
Fast Forward
Search forward / go to next
Shows you the counter.
-
a
SELECT/ENTER/OK
Acknowledge menu selection.
COUNT
Access the On-Screen
tray.
Tape Eject.
menu
-
-
Perform the Karaoke Search.
-
SETUP/ i
Access
or remove
setup
-
TITLE
Display
the title
menu
chapter
menu.
track.
or
Winds the
?
tape forwards.
Press and hold button for about
of the disc if
two seconds.
available.
PLAY (G)
Starts playback.
?
PAUSE/STEP (
)
playback temporarily / press
repeatedly for frame-by-frame
playback.
STOP(A)?
Stops playback.
?
Pause
?
-
0-9 numerical buttons
Select numbered items in
audio
an
an
Press and hold button for about
two seconds.
?
language (DVD) or
(CD).
PROGRAM
Access or remove program menu.
CLEAR
Clear a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
audio channel
SUBTITLE
Select
a
subtitle
?
language.
MARKER
Mark any
-
a menu.
AUDIO
Select
-
?
point during playback.
SEARCH
-
?
?
Display
MARKER SEARCH
menu.
REPEAT
Repeat chapter, track, title, all.
RANDOM/CM SKIP
Play tracks in random order.
CM SKIP
-
MIC/ECHO
?
?
To select the MIC/ECHO mode
RETURN
-
-
Reverse SKIP/SCAN (
)/
Rewind
Search backward / go to beginning of current chapter or track or
go to previous chapter or track.
Rewinds the tape.
Remove the
Displays
the
menu
setup
of
a
-
?
-
menu.
?
video CD
with PBC.
on
camera
angle
if
available
KARAOKE
Switch Karaoke
ANGLE
Select DVD
?
and off.
A-B/LP
-
-
Repeat sequence.
Select the recording
speed
of the
tape.
*
?
Feature is not available.
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
the buttons.
Distance: About 23 ft
remote
Angle:
remote
battery
Detach the
AAA AAA
(7 m)
ZOOM
Enlarge
from the front of the
video
image.
installation
battery
cover on
(size AAA) batteries
aligned correctly.
sensor
the
rear
of
the remote control, and insert two R03
with
and
About 30° in each direction of the front of the
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel
AUDIO OUT
Connect to
COAXIAL
(Digital
audio out
jack) (DVD EXCLUSIVE OUT)
digital (coaxial) audio equipment.
Connect to
AUDIO OUT L/R
Connect to
an
(Left/Right) (DVD EXCLUSIVE OUT)
amplifier, receiver or stereo system.
an
DVD and VHS
(Both
amplifier,
receiver
or
stereo
out)
system.
AUDIO IN L/R
Receive the audio
external
(VHS IN )
signals from an
source
to VCP.
AC Power Cord
Connect to
a
power
source.
VIDEO IN
Receive the video
external
VIDEO OUT
(Both
Connect to
a
(VHS IN )
signals from an
source
to VCP.
DVD and VHS
TV with video
S-VIDEO OUT
(DVD
Connect to
COMPONENT VIDEO OUT
out)
inputs.
a
(Y
EXCLUSIVE
TV with S-Video
Pb
Pr) (DVD
Connect to
a
(DVD
Connect to
8
EXCLUSIVE
TV with Y Pb Pr
VIDEO OUT
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
OUT)
inputs.
a
OUT)
inputs.
EXCLUSIVE
TV with video
OUT)
inputs.
Connections
DVD exclusive out connection
Tips
Depending
your TV and other equipment you wish
to connect, there are various ways you could connect
the unit.
You
on
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
1
can
For better sound
reproduction, connect this unit's
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page 10.
2
watch the DVD
Connect the VIDEO OUT
playback.
jack
on
EXCLUSIVE OUT to the video in
using
best connections.
only
this unit's DVD
jack
on
the TV
the video cable.
Connect the Left and
Right
AUDIO OUT
jacks
of
this unit's DVD EXCLUSIVE OUT to the audio left/
right
in
jacks
on
the TV
using
the audio cables.
Caution
--
Make
directly to the TV.
input channel.
Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
sure
this unit is connected
Set the TV to the correct video
--
Connecting
to a TV
Make
one of the following connections, depending
capabilities of your existing equipment.
When using the COMPONENT VIDEO OUT jacks,
on
the
set TV's INPUT to COMPONENT VIDEO.
When
using
the S-VIDEO OUT
jack,
set the TV'
s
INPUT to S-VIDEO.
Basic connection
1
(AV)
Connect the VIDEO OUT
jack
on
DVD/VHS OUT to the video in
this unit's
jack
on
the TV
using
the video cable.
2
Connect the Left and
jacks
on
the TV
using
S-Video connection
1
Right AUDIO
OUT
this unit's DVD/VHS OUT to the audio
jacks of
left/right in
the audio cables.
(for DVD)
Connect the S-VIDEO OUT
S-Video in
jack
on
the TV
jack on this unit
using the optional
to the
S-Video cable.
2
Connect the Left and
this unit to the audio
using
the audio cables.
Component
(for DVD)
1
Video
(Color
Stream
) connection
Connect the COMPONENT VIDEO OUT
jacks
the unit to the
the TV
using
2
Right AUDIO OUT jacks of
left/right in jacks on the TV
an
in
corresponding
jacks
optional Y Pb Pr cable.
on
on
Connect the Left and
the unit to the audio
using
Right AUDIO OUT jacks of
left/right in jacks on the TV
the audio cables.
9
PREATION
Connections
Connecting
(Cont'd)
Optional Equipment
to
Notes
--
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic II /
Pro Logic
Connect the Left and
AUDIO OUT
this
Right
jacks
right in jacks on your amplifier,
system, using the audio cables.
on
unit to the audio left and
receiver
stereo
or
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
channel
Connect this unit's DIGITAL AUDIO OUT
1
(COAXIAL) to
amplifier. Use
the
an
jack
corresponding in jack on your
optional coaxial audio cable.
You will need to activate this unit's
2 (See "Digital
Digital
A
Audio
Output"
on
digital output.
14).
page
Multi-channel sound
digital multi-channel
quality. For this
connection
the best
provides
sound
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
Rear of this unit
VHS
DVD/VHS
IN
OUT
DVD EXCLUSIVE OUT
R
DIGITAL
COMPONENT
AUDIO
AUDIO OUT
VIDEO OUT
OUT
Pr
R
Pb
L
AUDIO
COAXIAL
L
VIDEO
Y
S-VIDEO OUT
2 channel
analog
stereo
or
Dolby
DVD exclusive out
Both DVD and
VCR out
Logic
II / Pro
Logic
Digital
connection.
multi-channel
connection
L
R
AUDIO INPUT
Amplifier (Receiver)
10
Pro
VIDEO OUT
COAXIAL
DIGITAL INPUT
If the audio format of the
the
capabilities of
produce a strong,
--
To
see
Screen
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the On-
Display,
press AUDIO.
Before
How to
Operation
the main
using
This VCP
be
menus
screen.
The
VCP part
-
can easily
displayed on
menu
the
programmed by using
manually
Control Handset.
1
2
Switch
your TV set and video
the POWER button.
Press i button.
menu
will appear
the TV
on
recorded in.
(Normally
If your tape
recorded in
was
set the switch to
AUTO.)
player by pressing
on
The main
system
If streaks appear during playback, set colour system
to conform to the system that the tape was
controlled from the Remote
menus are
To set the colour
PAL
screen.
Set colour
system
If your TV is
to
PAL
NTSC3.58
MULTI-SYSTEM TV
NTSC3.58
NTSC4.43
VCR
DR
OPR
O
F.OSD ON/OFF
O
OPR
O
DR
O
ABC
-
-
AB
C
MESECAM
OSD
PAL TV
NTSC4.43
MULTI-SYSTEM TV
NTSC-PB
PAL TV
MESECAM
MULTI-SYSTEM TV
To switch the
display of operational mode of your VCP ON or
OFF.
improve the playback picture
(see p 16).
To check a problem with your VCP
(see p 24).
OSD To change the language setting
-
NTSC-PB
To
-
for
OSD.
You
can
between
O
KARAOKE
-
select the
To switch
language
and Russian.
English
off Karaoke &
on or
Karaoke Search.
O
SCORE
O
SYSTEM
-
(see p 26).
display the score your
you Karaoke (see p 26).
To
-
Select the colour
playback
song when
system used for
and
recording.
The system is changed as shown
below. (Refer to the right for more
information.)
*If you want to record NTSC signals,
press OK and select between
NTSC 3.58 and NTSC 4.43.
Source
Mode
System Change
PAL/
Recording
AUTO
→
PA L → MESECAM
MESECAM
Playback
AUTO
→
PA L → MESECAM
Recording
NTSC3.58
Playback
NTSC-PB
NTSC
3
Press 1 and 2 to select the
then Press OK to
change
→
→
Press "i" to
remove
the
NTSC3.58
*
→
NTSC4.43
option to change,
setting and
the
press 1 and 2 to select the sub
4
NTSC4.43
menu.
menu screen.
11
PREATION
Before
General
This manual
Operation
-
DVD
part
Temporary
Explanation
the basic instructions for
gives
operating
require specific operation or allow
only limited operation during playback. When this
occurs, the symbol
appears on the TV screen,
that
the
indicating
operation is not permitted by this unit
is not available
or
On-Screen
The
TV
screen.
Track
ALL
Repeat
All Tracks
AB
Repeat
A-B
Repeat
Off
OFF
can
Resume
displayed on the
changed on the menu.
can
be
be
Action
display operation
Press DISPLAY
1
status
Some items
On-screen
Repeat
Display
general playback
Title
Repeat Chapter
CHAPT
TRACK
the disc.
on
Repeat
TITLE
this unit. Some DVDs
Feedback Field Icons
play
(non-PBC
Video CDs
(non-PBC
from this
only)
Video CDs
only)
point
not available
prohibited
or
may not
provide
Notes
Some discs
during playback.
all of the below On-
Screen
2
Press 3
or
4 to select an item.
highlighted.
Press 1
the
3
The selected item will be
or
2 to
change
The number buttons
numbers
Display.
If no button is pressed
Display disappears.
(e.g.,
title
can
setting
of
item.
an
be also be used for
number).
For
some
press SELECT/ENTER to execute the
for 10 seconds, the On-Screen
setting
functions,
setting.
DVD
Items
Function (Press 3/4 to select desired item)
Title Number
Shows the current title number and total number of
1/3
Chapter
Number
1 /12
Time search
0:20:09
Audio
1 ENG
language
Digital Audio
Output mode
and
Subtitle
language
Angle
5.1 CH
ABC
OFF
1/1
Sound
VCD2.0
D
NORM.
and
Track Number
1/4
Time
0:20:09
Audio Channel
to the desired title number.
Shows the current
chapters,
and
to the desired
chapter
number.
Shows the
searches
elapsed playing time, and
the point by the elapsed time directly.
Shows the current audio soundtrack
encoding method, and
changes the setting.
channel
Shows the current subtitles
changes
the
language,
number, and
language,
and
the
,
SELECT/ENTER
Numbers
,
SELECT/ENTER
1/2,or
AUDIO
SUBTITLE
angle number and total
changes the angle number.
Shows the current sound
changes
1/2,or
Numbers
1/2,or
and
setting.
Shows the current
angles,
1/2,or
Numbers, SELECT/ENTER
number and total number of
chapter
skips
mode,
number of
and
setting.
1/2,or
ANGLE
1/2
Function (Press 3/4 to select desired item)
Selection Method
Shows the current track
1/2,or
Numeric, SELECT/ENTER
and PBC On
Shows the
mode,
NORM.
changes
and
number, total number of tracks
skip to the desired track number.
elapsed playing
Shows the audio
STER.
channel,
time
(Display only)
the
setting.
--
1/2,or
and
AUDIO
the audio channel.
Shows the current sound
changes
12
skips
VCD1.1
Items
Sound
titles,
Selection Method
mode,
and
1/2
Before
Initial
You
-
DVD
Personal Preferences
own
General
Settings
part
Menu
Settings
set your
can
Initial
1
Operation (Cont'd)
on
this unit.
Select
you
Language
a
see
Operation
Press SETUP.
The
setup
menu
for the
language
appears.
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
Country
Disc Subtitle
English
French
Rating
German
Audio
PREATION
Output
Spanish
Code
Aspect
Menu
Italian
Code
Others
Country
TV
menu
Language
Digital
Disc Menu
This is the
Aspect
Menu
Original
menu.
Disc Audio
TV
Disc Audio
setup
when you press SETUP.
Italian
Chinese
Language
Polish
Digital
Audio
Output
Picture
Hungarian
Other--------
Others
2
TV
Press 3/4 to select the desired item.
The
screen
will show the current
selected item,
well
as
as
for the
setting
setting(s).
alternate
While the desired item is
selected,
3 3/4 select the desired setting. press
Press SELECT/ENTER
confirm your
4 selection.
2, then
to
to
Some items
Press
5 setup
require
additional
SETUP, RETURN
or
Aspect
DVD
4:3 Letterbox: Select when
connected.
Displays
a
standard 4:3 TV is
theatrical
bars above and below the
images
picture.
4:3 Panscan: Select when
a
with
masking
conventional TV set is
connected. The video material formatted in the Pan &
Scan
style
picture are
is
played
off).
back in that
style (Both
sides of the
cut
16:9 Wide: Select when
a
16:9 wide TV is connected.
steps.
PLAY to exit the
menu.
Disc Audio
4:3 Letterbox
Disc Subtitle
4:3 Panscan
Disc Menu
16:9 Wide
Rating
Country
TV
Language
Disc
Language
Select
language
a
DVD
Language
Digital
for the disc's Menu, Audio and
Code
Aspect
Menu
Audio
Output
Others
Subtitle.
original language set for the disc is selected.
language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 29. If you enter the wrong language
Original
Other
:
:
The
To select another
code, press CLEAR.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Code
Aspect
Menu
Spanish
Italian
Language
Chinese
Polish
Digital
Audio
Output
Hungarian
Other--------
Others
13
Before
Operation (Cont'd)
-
DVD
Sound
Digital
Others
Audio
Output
Each DVD disc has
Set this unit's
of audio
part
The DRC, Vocal, PBC and Auto
variety of audio output options.
Digital Audio Output according to the type
a
system you
SELECT/ENTER. The
changed
if you connected this unit's DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equipa
between On and Off.
DTS decoder,
MPEG decoder.
or
with
stereo
amplifier.
This unit
a
Auto
2 channel
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
/PCM
PCM
Rating
Code
Aspect
Menu
48KHz
Language
Digital
Audio
Sample Freq.
96KHz
Output
Others
Sample Frequency
To
Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
change
Play
Off
Code
Aspect
Menu
Language
Audio
Output
Others
outputs sounds in the PCM
Disc Audio
TV
TV
digital
system.
Country
Country
decoder
2ch format when you play a DVD video disc recorded
on the Dolby Digital, MPEG1 or MPEG2 recording
Disc Menu
PBC On
Rating
Digital
PCM: Select when connected to
Vocal On
Disc Subtitle
Disc Menu
Dolby Digital
a
DRC On
Disc Audio
Dolby Digital decoder).
Stream/PCM: Select "Stream/PCM" if you connected
this unit's DIGITAL OUT jack to an amplifier or other
equipment
be
can
Press 3/4 to select the desired item and press
setting of the selected item is
use.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
ment with
Play settings
changed.
Dynamic Range
Control
(DRC)
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
thanks to
possible,
audio
digital
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
at
a
quietest ones). Then, you may
losing clarity
lower volume without
listen to
a
movie
of sound. Set
DRC to On for this effect.
Vocal
the
Set Vocal to On
only
DVD is
The karaoke channels
playing.
mix into
a
when
a
multi-channel karaoke
on
the disc will
normal stereo sound.
PBC
Set
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On
or
Off.
played according to the PBC.
played the same way as Audio
CDs.
Auto
You
Play
can
ically
set up the DVD
starts
If Auto
Play
search
a
play
DVD
playing
Off: Auto
so a
DVD disc automat-
mode is set to On, this DVD player will
playback time is long most and then
title that
back the title
On: Auto
Player
whenever the DVD is inserted.
Play
Play
automatically.
function is activated.
function is not activated.
Note
The Auto
14
Play
function may not work for
some
DVDs.
Before
Operation (Cont'd)
DVD
-
Parental Control
Rating
Code
Country
DVD
Enter the code of
DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain
part
scenes on
the disc. These
scenes are
whose standards
were
PREATION
Code Set
NG
Disc Subtitle
Disc Menu
are
Rating
Country
TV
The Parental Control feature allows
country-dependent.
country/area
Disc Audio
rated
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
a
used to rate the DVD video disc, referring to the list
(See "Country Code List", page 30.).
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Code
Aspect
Menu
Language
Audio
Digital
Output
Others
Disc Audio
8
Disc Subtitle
7
Disc Menu
6
Rating
5
Country
TV
Code
3
Language
2
1
Digital
Audio
Output
Unlock
Change
Others
1
Select
3
"Rating"
and
on
the
Setup
menu
using
the
buttons.
4
2
While
3
When you have not entered a password yet.
Enter a 4-digit password using the numbered but-
"Rating"
tons to create
a
is
selected, press
2.
a
tons to
4-digit password using the numbered butconfirm the personal 4-digit security pass-
word, then press SELECT/ENTER.
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
4
Select
2
3
4
5
6
rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Unlock: If you select Unlock, Parental Control is
play in full.
1 to 8: Some discs contain
scenes
not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
played. Higher rated scenes
unless
an
alternative
scene
one.
back will
or
If
same
played
on
rating
the
level in order to
play
Follow
on
3 of
step
selected, press 2.
"Rating"
Select the first character
Shift the
cursor
on
using
using
the 3/4 buttons.
3/4 buttons.
Press SELECT/ENTER to confirm your country
selection, then press SETUP to exit the
code
the code is
below
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
).
Changing
the
4-digit
code
1
Follow
2
Enter the old code, then press SELECT/ENTER.
Select Change using the 3/4 buttons then press
3
Steps
1-2
as
shown above to the left
(Rating).
SELECT/ENTER.
4
Enter the
new
4-digit code,
then press
SELECT/ENTER.
5
Enter exactly the same code a second
fy by pressing SELECT/ENTER.
6
Press SETUP to exit the
If you
forget
your
4-digit
code
If you
forget
your
password,
to clear the current pass-
1
Press SETUP to
2
Use the Number buttons to enter the
display
time and veri-
menu.
word, follow the procedure below.
the
setup
menu.
6-digit
number
"210499".
the disc.
Press SELECT/ENTER to confirm your rating
selection, then press SETUP to exit the menu.
left.
1/2 buttons and select
using
the second character
The
5
Code is
Country
the disc.
suitable alternative is found, playYou must enter the 4-digit password
rating
While
or a
no
stop.
change
will not be
is available
The alternative must have the
lower
the 3/4 buttons
Note
not active. The disc will
be
using
menu.
Confirmation of the
a
Ratings
Code
Country
setup
menu.
personal 4-digit security password,
then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify.
When you have already entered a password;
Enter
the
4
Aspect
Menu
Select
1
3
4-digit password
Enter
a new
code
is cleared.
as
shown above to the left
(Rating).
15
with
Operation
Playing
You will
a
only
tape
tape
be able to load and
eject video
tapes (on PAL TV).
better
Getting
a
cassette is inserted and
picture
playback started,
function works to
the
the best
tracking
get
possible picture automatically. If the quality of the
recording is poor, repeatedly press 3 or 4 on the
remote control to manually adjust the tracking until
any distortions have been removed. Press numbered
0 on the remote control to switch automatic tracking
back
1
on
again.
Make
as
Turn
on
that you have correctly connected your
described earlier in this book.
your TV.
Press POWER to turn
on your VCP.
Insert the video cassette into your VCP.
The video cassette should have the window side
facing
up and the
arrow
facing
away from you.
Press PLAY to start
playing your tape.
If you load a video cassette which has had its
record protection tab removed, playback of the
cassette will start
Your VCP will
the best
automatically adjust
picture quality.
Press PAUSE/STEP to still
3
(Commercial Message) Skip:
normal
While
playback.
tape is playing press CM SKIP
control to
commercial
skip
material).
Repeatedly press
Press PAUSE/STEP
the
skip:
3 Press 90 seconds
4 Press
120 seconds
5 Press
150 seconds
6 Press
180 seconds
OPR
tracking
picture.
repeatedly to advance
(Optimum
Picture
automatically improves playback picture
quality by adjusting your VCP to the condition of the
tape.
1
Press i.
2
Press 1
3
Press OK.
or
2 to select OPR.
to
the
fOSD
can
be
Still
picture quality
pressing 3 or 4.
can
be
playing
your tape.
back press either FORWARD or
BACKWARD and this will enable you to rapidly
During playing
tape (7 times normal playback) and
are on the tape.
see
where you
FORWARD
played
or
rewinding press and hold
picture will be
normal playback speed.
or
BACKWARD the
back at 7 times
OFF
SOFT
SHARP
SYSTEM
OPRi
Press 1
or
2
repeatedly
to select:
OFF, SOFT
SHARP.
Please note you may
improved slightly by
Picture search:
Logic search:
During fast forwarding
4
playing
Press PLAY to continue
OPR
OK
paused
.
wind the
ON
OFF
playback.
for up to 5 minutes. After 5
minutes your VCP will stop the tape to prevent
damaging the tape or your VCP
Tapes
Response)
This feature
a
down at about 1/19 times the normal
16
CM SKIP to
the remote
2 Press 60 seconds
tape frame by frame.
If you press FORWARD, the picture will be slowed
4
(or
on
another programme
1 Press 30 seconds
automatically.
AUTO TRACKING
give
CM
sure
VCP
2
tape is reached, your VCP will stop
playback automatically, rewind, stop, eject the tape.
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
When
automatic
playback.
Press EJECT.
If the end of the
cassettes
when your VCP is plugged into the mains.
Your VCP may also playback recordings from NTSC
a
Press STOP to end
5
a
5
Press OK.
6
Press i to
only
set OPR when
tape.
remove
the
menus.
or
Operation
Playing
with DVD and Video CD
DVD and Video CD
a
Playback Setup
Turn
on
the TV and select the video
nected to the DVD
Audio
1
Note
VCD1.1
input
source con-
player.
system: Turn
and select the
DVD
VCD2.0
DVD
General Features
input
the audio
on
source
features may also be available
system
Moving
Press OPEN/CLOSE to open the disc
2 facing
tray, with the label
up.
double-sided DVD is inserted, make
the side you want to play is facing down.
Press OPEN/CLOSE to close the
starts
automatically.
The
a menu screen
is
appear
or
loading
a
DVD
you want to
3
4
buttons to select the
title/chapter
view, then press SELECT/ENTER
to start
playback.
Press TITLE
or
than
more
one
title, you
can move
to
num-
to another CHAPTER/TRACK
1 /12
a
title
on a
more
disc has
than
chapter/track
as
Press .
or
1/3
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
>
briefly during playback to select
chapter/track or to return to the beginning of
the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
the next
may be displayed first after
Video CD which contains a menu.
Use the 1 2
DVD
follows:
as
VCD1.1
disc has
displayed
menu screen
DVD
disc has
DVD
When
might
a
another title
Moving
tray.
the TV screen, and playback
If playback does not start,
menu
to another TITLE
Press DISPLAY, then press the appropriate
(0-9) to select a title number.
instead.
If
menu.
bered button
sure
on
press PLAY.
In some cases, the disc
Setup
1/3
a
READING appears
the
tray.
When
When
on
connected to the
player.
Load your chosen disc in the
3
Unless stated otherwise, all operations
described use the remote control. Some
DISC MENU to return to the
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
menu
screen.
Note
For
VCD2.0
Use the number buttons to select the track you want
two-digit numbers, press
(0-9) in rapid succession.
the numbered buttons
to view.
Press RETURN to return to the
Menu
setting
the
operating procedures for
depending on the disc.
may differ
Follow the instructions on the each
using
Slow Motion
menu screen.
and the exact
menu
You also may set PBC to Off under
14.
menu screen.
setup. See page
1 Press .
The
player
or
VCD2.0
DVD
>
during
VCD1.1
pause.
will enter SLOW mode.
2 Use the .
or
> to select the
t
required speed:
1/16, t 1/8, t 1/4 or t 1/2 (backward),
T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
or
T 1/16,
Notes
--
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
--
--
--
(see
"Parental Control",
DVDs may have a
Note
Slow motion
playback
in
reverse
is not
applicable
for
Video CD.
on page 15).
region code.
Your player will not play discs that have a region code
different from your player. The region code for this
player is 5 (five).
If you load
protection
a
video cassette which has had its record
tab removed
during playing the DVD,
automatically.
the
mode will be switched to VHS
17
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
VCD1.1
2 You
can
will
during playback.
repeatedly
on
Track icon appears
Repeat
repeat
the disc
on
the TV
screen.
press REPEAT
currently playing,
a
second time.
The
now
PAUSE/STEP
pressing
Track/All/Off
Repeat
-
repeat the track currently playing, press REPEAT.
The
2 To
go into PAUSE mode.
advance the picture frame-by-frame
player
1 To
Frame-by-frame playback
1 Press PAUSE/STEP
The
Video CDs
(continued)
by
Repeat All
3 To exit
the remote
The
icon appears
Repeat mode,
screen.
press REPEAT
Off icon appears
Repeat
the TV
on
the TV
on
a
third time.
screen.
control.
Note
Search
VCD2.0
DVD
1 Press and hold .
On
VCD1.1
setup
> for about two seconds
or
during playback.
The
player
will
go into SEARCH mode.
now
2 Press and hold .
>
3 To exit SEARCH
mode, press PLAY.
A-B
A*
AB
To
repeat
a
VCD2.0
DVD
OFF
sequence in
a
title:
1 Press A-B at your chosen
A* appears
2 Press A-B
briefly
the TV
on
starting point.
screen.
at your chosen end point.
the TV screen, and the repeat sequence
repeat appears on the player's display).
again
A B appears
begins (a-b
VCD1.1
briefly
on
3 To cancel the sequence, press A-B.
Random
Karaoke DVD
VCD1.1
1 Press RANDOM
The unit
Video CD with PBC, you must set PBC to Off on the
menu to use the Repeat function. See page 14.
Repeat
to select the
repeatedly
required speed: mX2, mX4, mX16, mX100
(backward) or MX2, MX4, MX16, MX100
(forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
or
a
during playback or in stop mode.
automatically begins Random Playback and
"RANDOM" appears
2 To return to normal
on
the TV
screen.
press RANDOM
the TV screen.
playback,
until "NORMAL" appears
on
again
Time Search
0:20:09
DVD
The Time Search function allows you to start
any chosen time on the disc.
1 Press DISPLAY
play
appears
on
>
The
during playback.
the
playing
on-screen
at
dis-
screen.
The Time Search box shows the
Tips
By pressing
-:--:--
elapsed playing
time of the
current disc.
during Random playback, the unit
(track) and resumes Random
2 Within 10
selects another title
seconds, press 3/4
Search icon in the
playback.
on-screen
to select the Time
display.
The "-:--:--" appears in the Time Search box.
Note
This function
works with DVD Karaoke discs and
only
video CD without PBC.
OnaVideoCDwithPBC,youmustsetPBCtoOffon
the
setup
menu
to
use
the Random function. See
page 14.
VCD2.0
DVD
TRACK
repeat
the
-
2 To
Repeat Chapter/Title/Off
currently playing chapter,
Repeat Chapter
icon appears
on
the TV
3 To exit
The
Title icon appears
Repeat mode,
Repeat
on
the TV
screen.
press REPEAT
Off icon appears
on
the TV
a
third time.
screen.
invalid
This unit
hours, minutes, and
sec-
in the box.
seconds, press SELECT/ENTER
starts from the selected time
on
to confirm
the disc. If you enter
time, playback will continue from the
can
a
VCD2.0
DVD
produce
a
VCD1.1
current
point.
3D SUR
NORM.
3D Surround effect, which
playback from two
conventional stereo
five
more
speakers, instead of the
speakers normally required to listen to
multi-
channel audio from
1 Press DISPLAY
a
home theater
or
system.
during playback.
2 Press 3/4 to select "NORM."
3 Press 1/2
selected.
18
right
simulates multi-channel audio
screen.
second time.
Repeat
the number buttons to enter
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
3D Surround
press
repeat the title currently playing, press REPEAT
The
onds from left to
an
OFF
REPEAT.
The
use
start time. Enter
the start time.
VCD1.1
ALL
seconds,
required
Playback
TITLE
DVD Video Discs
1 To
the
4 Within 10
Repeat
CHAPT
3 Within 10
repeatedly
or
"3D SUR".
until the desired sound is
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
(continued)
VCD1.1
during playback
or
still
playback
discs: Menus
to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the
increases up to six times.
2 Use the 1 2
zoomed
3 4
move
the
through
picture.
3 Press CLEAR to
the
buttons to
normal
resume
playback
or
DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select
option. Or, use the 1/2/3/4 buttons to highlight your
selection, then press SELECT/ENTER.
level
magnification
return to
paused image.
1 Press TITLE.
If the current title has
screen.
zoom
The
zoom
function may not work for
function may not work on
some
DVDs.
2 The
3 To
DVD
VCD2.0
menu, the
list
menu can
menu
menu
will appear
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
the
on
may appear.
again.
VCD1.1
DVD
Disc Menu
MARKER SEARCH
1/9
a
Otherwise, the disc
and subtitle
multi-angle
scenes.
Marker Search
an
DVD
Title Menu
Note
The
DVD
the contents of DVD Video
Checking
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
1 Press DISC MENU.
You
can
nine
points
To enter
1
start
playback
from
memorized
a
point. Up
to
be memorized.
can
mark, follow these steps.
a
The disc
2 To
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
memorize.
The Marker icon will appear
2
Repeat step
on
the TV
1 to enter up to nine Marker
points
1
a
on a
Marked Scene
disc
During
playback,
The MARKER SEARCH
menu
will appear
on
a
the
screen.
Marker
1
During
playback,
2
angle
appears
on
the
display.
the Audio
Language
DVD
1 ENG
repeatedly during playback
language or audio track.
to hear
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(STER., LEFT or RIGHT).
VCD2.0
a
dif-
VCD1.1
a
dif-
press SEARCH.
menu
will appear
on
the
screen.
Subtitles
DVD
ABC
1 ENG
Press SUBTITLE
erase.
different subtitle
Press CLEAR.
repeatedly during playback
languages.
to
see
the
The Marker number will be erased from the list.
4
Repeat steps
2 and 3 to
erase
additional Marker
Note
numbers.
If
5
To
remove
a
ferent audio channel
Press 1/2 to select the Marker number that you want
to
3
Changing
ferent audio
scene.
Marked Scene
disc
camera
camera
D
the MARKER SEARCH menu, press
The MARKER SEARCH
different
Press AUDIO
will start from the Marked
a
recorded at different
a
5.1 CH
SEARCH.
To clear
to
1/1
angles, you
change
angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
num-
3 Press SELECT/ENTER.
remove
scenes
The number of the current
seconds, press 1/2 to select
ber that you want to recall.
4 To
DVD
again.
press SEARCH.
2 Within 10
Playback
Angle
can
disc.
To Recall
displayed.
the disc menu, press DISC MENU
If the disc contains
briefly.
screen
is
menu
remove
the MARKER SEARCH menu, press
appears, the feature is not available
on
the disc.
SEARCH.
19
OPERATION
Operation
with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
CD
MP3
The DVD
ings
can
play
CD-ROM, CD-R
on
or
MPEG1 audio
CD-RW discs.
playing MP3/WMA recordings,
MP3/WMA Recordings on right.
Insert
MP3/WMA
read the notes
files that have
on
The
player
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
can
not read
extension other than
disc and close the tray.
CD; Audio CD menu appears on the TV
screen go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
MP3 file that has
an
file
a
".mp3".
a
About
Audio
MP3/WMA Disc
limited
Press 3/4 to select the MP3/WMA then press
2 SELECT/ENTER.
The MP3/WMA
1.
as
appears on the TV screen.
to the MP3/WMA-JPEG
menu
2.
move
menu.
3.
MP3 WMA
4.
Program
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Clear All
Folder8
5.
OFF
00:00
Media
a
offers double the audio
with this
compatibility
player
is
follows:
Sampling Frequency / only at 44.1kHz (MP3),
(WMA)
Bit rate / within 32 320kbps (MP3),
32-128 kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "Easy-
CD Creator", which creates an ISO9660 file system.
single session disc requires MP3/WMA files in the
A
track, it
folder, and SELECT/ENTER.
3 A list of files in the folder appears.
to
a
track then press PLAY
or
6.
File
should be named
incorporate ".mp3"
e.g. "********.MP3"
the current track's
elapsed playing
time will appear on the display window and
Playback will stop at the end of the disc.
menu.
MP3/WMA file in the 1st
playback
or use a new one.
names
and must
SELECT/ENTER.
no
MP3/WMA files. If you wish
MP3/WMA files, format all the data in
cannot
playback
the disc
Press 3/4 to select
Press TITLE to
Audio)
compression
the MP3 format.
first track. If there is
Press 3/4 to select
Playback starts.
During playback,
Audio)
Microsoft audio
22.05-44.1 kHz
Press RETURN to
choice
a
technology.
WMA(Windows
compression of
JPEG
Media
WMA(Window
An WMA file is
MP3 WMA
4
Recordings
An MP3 file is audio data
MP3/WMA formatted record-
Before
1
on
About MP3
WMA
Player
Notes
or
using
or
8 letters
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
to the next page.
move
Press DISC MENU to
move
to the
previous
page.
This DVD
player requires discs/recordings
to meet
certain technical standards in order to achieve
Program
CD
Program
MP3 WMA
TRACK01
TRACK02
TRACK 1.mp3
TRACK03
TRACK 2.mp3
TRACK04
TRACK 3.mp3
TRACK 6.mp3
TRACK07
TRACK 7.mp3
Clear All
TRACK08
STER.
NORM.
Audio CD
menu
0: 56: 18
Clear All
TRACK 8.mp3
00:00
1
If you
MP3/WMA
a
file list and want to return to the Folder list,
and press SELECT/ENTER to
in
return to the
20
required
permission
highlight
previous menu
stop playback
screen.
at any other
time, press STOP.
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
grant such permission. Permission should
to
are
To
many different types
(including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
Customers should also note that
menu
the 34 to
5
optimal
automatically
OFF
Tip
use
are
are
of recordable disc formats
TRACK 5.mp3
TRACK06
Pre-recorded DVDs
set to these standards. There
TRACK 4.mp3
TRACK05
playback quality.
always
be
sought
from the
copyright
owner.
right
with Audio and MP3/WMA Disc
Operation
CD
Pause
MP3
1 Press PAUSE/STEP
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
or
To
1
press
repeat
Press .
next track
CD
another Track
MP3
WMA
or
>
briefly during playback to go to the
beginning of the current
to return to the
track.
Press . twice
to
briefly
step back
to the
previous
In
case
during playback.
again
Repeat
"
appears
on
the
menu screen.
at your chosen end point.
on the menu screen,
icon and "AB" appears
and the sequence
The
of audio CD, to go directly to any track, enter
using the numbered buttons (0-9)
icon and "A
Repeat
press A-B at your chosen start*
begins
to
play repeatedly.
3 To exit the sequence and return to normal
A-B again.
track.
the track number
sequence.
2 Press A-B
The
or
a
CD
During disc playback,
ing point.
The
Moving to
A-B
Repeat
icon and "OFF" appears
3D Surround
This unit
the
press
menu screen.
CD
produce
can
on
play,
a
3D Surround effect, which
playback from two
simulates multi-channel audio
Repeat Track/All/Off
1 To
CD
MP3
conventional stereo
WMA
more
repeat the track currently playing, press REPEAT.
The
icon and "TRACK" appears
Repeat
the
on
menu
speakers, instead of the
speakers normally required to listen to
multi-channel audio from
1 Press DISPLAY
or
screen.
2 To
repeat all tracks
on a
disc, press REPEAT
icon and "ALL" appears
Repeat
3 To cancel
The
Repeat mode,
Repeat
on
the
3 Press 3/4
selected.
menu screen.
press REPEAT
icon and "OFF" appears
on
the
third time.
a
home theater
menu screen.
repeatedly
or
system.
during playback.
2 Press 1/2 to select "NORM."
a
second time.
The
a
AUDIO
five
or
"3D SUR".
until the desired sound is
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear a
(STER., LEFT, or RIGHT).
CD
different audio channel
Search
CD
MP3
1 Press and hold .
or
WMA
> for about two seconds
during playback.
The
player
will
now
go into SEARCH mode.
2 Press and hold .
or > repeatedly to select the
required speed: mX2, mX4, mX8 (backward) or
MX2, MX4, MX8 (forward).
Search
speed
and direction
are
indicated
on
the
menu
screen.
3 To exit SEARCH
Random
mode, press PLAY.
CD
MP3
1 Press RANDOM
WMA
during playback
or
when
playback
is
stopped.
The unit
automatically begins
"RAND." appears
on
2 To return to normal
repeatedly
until
the
Random
Playback
and
menu screen.
playback, press RANDOM
disappears on the menu
"RAND."
screen.
21
OPERATION
Operation
Viewing
with JPEG Disc
JPEG disc
a
JPEG
This DVD
Player can play discs with JPEG files and
Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
1
Insert
disc and close the
a
TV
menu
to another File
Press .
or
>
once
advance to the next file
1 Press PAUSE/STEP
appears
on
during viewing a picture
to the previous file.
to
or
Still Picture
tray.
The MP3/WMA-JPEG choice
Moving
the
screen.
The
will
during
slide show.
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
player
now
MP3 WMA
To
JPEG
2
flip the picture
Press 3/4 during showing a picture
picture horizontally or a vertically.
Press 3/4 to select the JPEG then press
to
flip
the
SELECT/ENTER.
The JPEG
menu
appears
on
the TV
To rotate
screen.
Press 1/2
JPEG
Folder2
during showing
clockwise
picture
Folder1
picture
or
a
picture
to rotate the
counter clockwise.
Folder3
Folder4
Folder5
Notes
Folder6
Folder7
on
JPEG
Recordings
Folder8
Slide
Depending
Off
Speed
upon the size and number of the JPEG
a long time for the DVD player to
files, it could take
Press 3/4 to select
and SELECT/ENTER.
3 A list of files in the folderfolder,
appears.
Press RETURN to
choice
a
move
to the MP3/WMA-JPEG
menu.
If you
are
in
file list and want to return to the Folder
a
the 34 buttons
on
the remote to
previous
menu screen.
If
want to view
you
4 highlight
a
a particular file, press 3/4 to
file and press SELECT/ENTER or
PLAY.
Press TITLE to
move
Press DISC MENU to
move
to
to the next page.
move to the previous page.
Picture1.jpg
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
1024X768
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
Tip
There
are
three
viewing
Slide
Speed options: Fast,
to highlight the Slide
select the option you want to
Normal, Slow, and Off. Press 1/2
Speed
then press 3/4 to
use, and press SELECT/ENTER.
5
To
stop viewing
The JPEG
22
reduce the resolution of the JPEG files
pixels
and burn another disc.
on
the disc should
be less than 650.
When you are using software such as "Easy CD
Creator" to burn the jpeg files into the CD-R, ensure
that all the selected files have the ".jpg" extensions
when
copying
rename
to
Folder1
5/32
---
into the CD
layout.
If the files have
Viewing the file proceeding starts.
During viewing a file, press RETURN
the previous menu (JPEG menu).
JPEG
big
Some disc may be incompatible due to different
recording format or condition of disc.
highlight
and press SELECT/ENTER to return to the
"
too
Total number of files and folders
use
"
are
to less than 2 mega
Tip
list,
read the disc's contents. If you don't see an ondisplay after several minutes, some of the files
screen
menu
at any other
appears.
time, press STOP.
File
them
names
be read
shown
by
as
".jpe" or ".jpeg" extensions, please
as ".jpg" files.
without
".jpg" extension will not be able to
player. Even though the files are
image files in windows explorer.
this DVD
JPEG
Programmed Playback
CD
VCD2.0
with Audio CD
Programmed Playback
VCD1.1
function enables you to store your favorite
tracks from any disc in the player memory.
Program
Program
mode to enter the
during playback or in
Program Edit mode.
the
E
The
mark will appear to the right of the word
the right side of the menu screen.
on
with Video CD
Note
On
a
setup
Video CD with PBC, you must set PBC to Off on the
menu to use the Program function. See page 14.
contain 30 tracks.
can
Press PROGRAM
1
WMA
Programmed Playback
and MP3/WMA disc
The
MP3
stop
Program
Insert Video CD and close the
1
2
Press PROGRAM while
The VCD
Program
menu
OPERATION
tray.
is
playback
stopped.
will appear.
Program
VCD
E
TRACK 1
TRACK 2
Note
TRACK 3
Press PROGRAM to exit the
Program
TRACK 4
Edit mode;
TRACK 5
TRACK 6
E
the
mark will
disappear.
TRACK 7
Clear All
TRACK 8
Select
2 place
a track, then press SELECT/ENTER to
the selected track on the Program list.
Note
Repeat step 2
Program list.
3
to
place
the
TRACK 12
TRACK 2
TRACK 8
TRACK 1.mp3
TRACK 2.mp3
TRACK 3
TRACK 10
TRACK 2.mp3
TRACK 4.mp3
TRACK 4
TRACK 3
TRACK 3.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 7
Clear All
TRACK 8
STER.
0: 56: 18
Audio CD
Clear All
TRACK 8.mp3
NORM.
00:00
To
track you selected last is
highlighted
on
the program list.
5 playing.
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops
played once.
Program
list
have
7
To
resume
playback,
Edit
a
playback
from
the
E
mark will
track of CD
programmed
Program
disappear
(or MP3/WMA) list
and
and then
press SELECT/ENTER.
"PROG." indicator
disappears
Tracks
the
on
the
menu
a
the program list, press
icon and "ALL" appears
Repeat mode,
Track from
the
on
menu screen.
press REPEAT
icon and "OFF" appears
Repeat
Erasing
on
on
Program
the
a
third time.
menu screen.
List
1 Press PROGRAM
MP3/WMA disc
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to
to the
move
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
on
PROGRAM.
screen.
second time.
a
Repeat
Program
normal
press PROGRAM to exit the
mode;
select
repeat all tracks
REPEAT
The
Press PLAY to start.
the
the TV
icon and "TRACK" appears
Repeat
To cancel
6 Playback begins
on
from
repeat the track currently playing, press REPEAT.
The
to the next page.
Press DISC MENU to move to the previous page.
move
after all of the tracks
with
left.
on
screen.
To
Press 3/4 to select the track you want to start
Press TITLE to
on
menu.
"Programmed Playback
normal
Repeat Programmed
menu
The
programmed
resume
"NORMAL" appears
Press 2.
The
2-6 of
Program
OFF
3
MP3/WMA
menu
steps
PROGRAM to exit the
playback
4 programmed playback,
press
TRACK 5.mp3
TRACK 6
Follow
or
Audio CD and MP3/WMA disc"
To
TRACK 3.mp3
TRACK 4.mp3
Press RETURN
3
E
TRACK 8.mp3
TRACK 1
TRACK 5
4
on
Program
MP3 WMA
E
Program
CD
additional tracks
menu screen.
Erasing
1 Follow
List"
as
the
Program
Complete Program
steps
1-2 of
"Erasing
a
list.
List
Track from
Program
above.
2 Use 3/4 to select "Clear
All", then press
SELECT/ENTER.
The
complete Program
The programs
are
for the disc will be erased.
also cleared when the disc is removed.
23
Additional
On Screen
Operation
-
VCP part
Video Doctor
Display
(Self-Diagnosis)
You may easily display the operating mode, tape speed.
colour system, audio output channel and tape counter
This feature informs you that there is a problem with
your VCP. These error messages will appear on the TV
of your VCP on the TV
place these On Screen
screen.
onto the
1
If
a
recording
is
taking
will not be recorded
Displays
tape.
1
Press DISPLAY to
The
screen.
tape
Press i.
Press 1
or 2
to select DR.
Press OK.
display.
counter will also appear if there is
a
tape
loaded.
After 3 seconds the
2 Displays
the
will clear
majority of the On Screen
leaving only the tape counter
on
OK
screen.
Press DISPLAY
the TV
again
to
remove
all
displays
from
Digital Tape
2
indicates the
Counter is
on
O
win-
or
start
recording.
display the
tape
hours, minutes and seconds.
2
Press STOP when
playback
or
actual
recording
play
is
time in
complete.
Press BACKWARD.
The
tape will rewind and automatically stop when
the counter returns to 0:00:00.
a
problem.
PLEASE CLEAN:
O
RECORDABLE
O
NOT RECORDABLE:
Insert
Press CLEAR to set the counter to M 0:00:00.
counter will
2 to check
TAPE STATUS
Press COUNT.
Press PLAY
or
Clean your video heads.
loaded. The
a
tape.
The
Press 1
HEAD STATUS
OOK
the
displayed
display
tape
Digital Tape Counter
relative positions of recordings on the
dow if there is
1
OK i
screen.
Tape Counter Memory Stop
The
VCR
DR
HEAD STATUS
TAPE STATUS
3
4
tape with its protection tab in place.
a
Press OK.
Press i to
remove menus
Hi-Fi Stereo Sound
Press AUDIO
repeatedly
from the TV
screen.
System
until the desired audio mode
appears.
The choice is STEREO, LEFT, RIGHT and MONO.
24
Additional
Operation-DVD part
Last Condition
DVD
This
CD
player
Memory
VCD1.1
memorizes the
user
settings
for the last disc
that you have viewed. Settings remain in memory even
if you remove the disc from the player or switch off the
player.
If you load
a
disc that has its
settings
OPERATION
memo-
rized, the latest stop position is automatically recalled.
Notes
--
--
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
it.
Screen Saver
The
screen saver
DVD
Player
in
picture
appears when you leave the
stop mode for about five minutes.
25
Special Operation
Karaoke function
-
Before you start karaoke
Grading
As
You cannot
You
can
enjoy
sing along
with
a
karaoke
extra
use an
(video tape,
sing duets if
can
microphone.
1TurnonyourTVandsetittotheAV.
using
amplifier,
amplifier
When
Connect
2 duets,
turn
an
select this
on
the
?
microphone
to the MIC 1
jack.
connect another
microphone
to MIC 2
a
To
Insert
a
karaoke video
player
turns
a
on
tapes
tape.
and starts
playing automatically
tape with its safety tab removed.
Press PLAY.
If you want to play back
the Karaoke search.
a
specific
has been
perform
song,
Karaoke search will be
microphone
operated only
plugged in.
when
a
Karaoke search
3
Press F
or
G
on
Press F
or
G
again
Now you
can
Singing along
Press
1
disc
2
3
To
the remote control.
to
play
enjoy playing
a
desired song.
karaoke.
with karaoke VIDEO CD
or
DVD
OPEN/CLOSE, and place the disc
on
the
tray.
Press PLAY.
The disc
tray closes and
Now you
can
adjust
the
starts.
enjoy playing
microphone
karaoke.
volume
Press the MIC/ECHO to select the MIC control mode.
Press the 3/4 for the
microphone
connected to MIC
1/2.
Setting the microphone volume to the centre position
provides the best microphone volume.
To control the echo effect
Press the MIC/ECHO to select the ECHO control mode.
Press the 3/4. This controls both
effect in the
To
a
same
microphones'
echo
way.
get the best effect, adjust the microphone volume
level
26
grade
your
slightly higher
singing,
your
score
appears
on
than the music volume.
to
reproduced through
down the volume of
a
stereo
amplifier
before
If streaks appear during playback, select the
system that the tape was recorded in
"To set the colour system" on page 11).
If feedback occurs, turn down the microphone or TV
volume, or move the microphone away from the
(see
speakers.
with karaoke video
if you insert
?
can
colour
sing
jack.
sing-along
Singing along
If the sound is
amplifier, turn
operation.
and
player position.
Karaoke
2
player
Notes
?
The
challenge,
singing
this
source
?
1
your
When you have finished
the TV screen.
Karaoke from DVD exclusive out.
VCD, audio CD, Karaoke DVD). You
you
extra
singing.
Note
--
an
Special Recording
Copying
from DVD To VCP
This unit allows you to copy the contents of
tape with a press of the COPY button.
a
DVD to
a
Recording from
player
another video
VHS
With this video
player you can make recordings from
external source, such as copying from another video
player or a camcorder.
Note
If the DVD you
protected,
1
2
are attempting to copy is copy
you may not be able to copy the disc.
an
Note
Insert Disc
In the
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
used for
Insert VHS
Insert
3 Copy
a
the DVD to VHS
Press the COPY button
tape into the VCP deck.
If the DVD disc
the
as
VCP A.
Play
Copy
menu
button
1
Tape
on
the unit front
panel.
(VHS IN)/VIDEO (VHS IN)
Insert the recorded
2 tape
appears, you may need to
manually
VCP A should be connected to the AUDIO L/R
on
the
rear
panel
of your
VCP.
The DVD will go into Play mode and the VCP will
go into Record mode.
4 Stop
be referred to
Tape
blank VHS video
press the
The
following description, this video player will be one
recording and will be referred to as VCP B.
other appliance will be used for playback and will
to
begin copying.
tape into VCP A and
a
blank
into VCP B.
3
To start
4
When you want to finish
on both video players.
PLAY
recording,
on
press the REC
on
VCP B and
VCP A.
Process
When the DVD is finished
playing,
press the STOP
button to end the copy.
You must stop the Copy process manually when
the DVD movie ends, or the unit may replay and
record over and over again.
copying,
press the STOP
27
OPERATION
Troubleshooting
Check the
following guide
for the
possible
cause
or
VCP do not
work
properly.
a
before
problem
DVD
or
Correction
VHS button is not switched
Refer to page 2.
properly.
No power.
The power cord is disconnected.
The power is on, but
the DVD player does
No disc is inserted.
Plug the power
securely.
Insert
a
window is
The TV is not set to receive DVD
picture.
signal
the TV
player
The
No sound.
equipment
audio cable is not set to receive DVD
The audio cables
are
not connected
The DVD
not start
player does
playback.
The disc is
An
so
on
the
equipment
jacks
connected with
the audio cable.
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
Clean the disc.
dirty.
unplayable
input
screen.
mode of the
Connect the audio cable into the
Turn
is set to the
the TV
on
you can listen to the
sound from the DVD player.
The power of the equipment connected
with the audio cable is turned off.
wrong
poor.
audio receiver
securely.
Digital Audio Output
position.
display
appropriate video input mode
the picture from the DVD
appears
securely.
The
is
that the DVD or,
so
Select the correct
connected with the
signal output.
picture
(Check
lit.)
Select the
on
output.
The
disc.
cord into the wall outlet
audio CD indicator in the
not work.
No
service.
contacting
Cause
Symptom
DVD
of
Insert
disc is inserted.
a
playable
disc.
(Check
the disc
type, color system and Regional code.)
The disc is
placed upside
Place the disc with the
down.
playback
side
down.
The disc is not
within the
placed
guide.
Place the disc
inside the
dirty.
The
level is set.
Cancel the
the
The remote control
There is
does not work
remote control and this unit.
properly.
an
the disc
tray correctly
Clean the disc.
The disc is
Rating
on
guide.
obstacle in the
path
of the
The batteries in the remote control
are
rating
Rating
function
or
change
level.
Remove the obstacle.
Replace
the batteries with
new ones.
exhausted.
Video
tape
cannot be
Is the cassette
compartment empty?
Eject
the
tape in.
inserted.
No Hi-Fi sound
Audio mode is not set
properly.
Select "STEREO"
"AUDIO"
on
by repeatedly pressing
the remote control.
Video Head
Cleaning
accumulating on the head after a long period of time can cause the playback picture to
up. High quality video cassette tapes will not normally deposit dirt onto the video head, but
might. Clean the video heads with a commercially available video heads cleaning tape.
Dirt
28
become blurred
old
or
or
broken
damaged tapes
Language Code
Enter the
(See
appropriate
13).
List
code number for the initial
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6565
Afar
7079
Faroese
7678
Lingala
8375
Slovak
6566
Abkhazian
7082
French
7679
Laothian
8376
Slovenian
6570
Afrikaans
7089
Frisian
7684
Lithuanian
8377
Samoan
6577
Ameharic
7165
Irish
7686
Latvian, Lettish
8378
Shona
6582
Arabic
7168
Scots Gaelic
7771
Malagasy
8379
Somali
6583
Assamese
7176
Galician
7773
Maori
8381
Albanian
6588
Aymara
7178
Guarani
7775
Macedonian
8382
Serbian
6590
Azerbaijani
7185
Gujarati
7776
Malayalam
8385
Sudanese
6665
Bashkir
7265
Hausa
7778
Mongolian
8386
Swedish
6669
Byelorussian
7273
Hindi
7779
Moldavian
8387
Swahili
6671
Bulgarian
7282
Croatian
7782
Marathi
8465
Tamil
6672
Bihari
7285
Hungarian
7783
Malay
8469
Telugu
6678
Bengali; Bangla
7289
Armenian
7784
Maltese
8471
Tajik
6679
Tibetan
7365
Interlingua
7789
Burmese
8472
Thai
6682
Breton
7378
Indonesian
7865
Nauru
8473
Tigrinya
6765
Catalan
7383
Icelandic
7869
Nepali
8475
Turkmen
6779
Corsican
7384
Italian
7876
Dutch
8476
Tagalog
6783
Czech
7387
Hebrew
7879
Norwegian
8479
Tonga
6789
Welsh
7465
Japanese
7982
Oriya
8482
Turkish
6865
Danish
7473
Yiddish
8065
Panjabi
8484
Tatar
6869
German
7487
Javanese
8076
Polish
8487
Twi
6890
Bhutani
7565
Georgian
8083
Pashto, Pushto
8575
Ukrainian
6976
Greek
7575
Kazakh
8084
Portuguese
8582
Urdu
6978
English
7576
Greenlandic
8185
Quechua
8590
Uzbek
6979
Esperanto
7577
Cambodian
8277
Rhaeto-Romance
8673
Vietnamese
6983
Spanish
7578
Kannada
8279
Rumanian
8679
Volapuk
6984
Estonian
7579
Korean
8285
Russian
8779
Wolof
6985
Basque
7583
Kashmiri
8365
Sanskrit
8872
Xhosa
7065
Persian
7585
Kurdish
8368
Sindhi
8979
Yoruba
7073
Finnish
7589
Kirghiz
8372
Serbo-Croatian
9072
Chinese
7074
Fiji
7665
Latin
8373
Singhalese
9085
Zulu
REF NC
29
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
15).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
Coast
IN
India
NU
Niue
IO
British Indian Ocean
NZ
New Zealand
US
United States
Uruguay
Kingdom
Outlying
CI
Ivory
CK
Cook Islands
CL
Chile
Territory
OM
Oman
UY
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Verde
Anguilla
Islands
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
30
Republic
Islands
(French)
State
(British)
(USA)
Specification
General
Power
Power
requirements
AC 110-240V
consumption
20W
Dimensions
Mass
,
50/60 Hz
430 X 97.5 X 360
(approx.)
4.8
(approx.)
mm
(w/h/d)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
(41˚F
REF NC
95˚F)
to
System
Laser
Semiconductor laser,
Video Head
wavelength
Double azimuth 4 heads, helical
system
650
scanning.
Signal system
PAL
Frequency
DVD(PCM96kHz):2Hzto44kHz
DVD(PCM48kHz):2Hzto22kHz
response
nm
CD:2Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 95 dB
range
More than 95 dB
Wow and flutter
OUT connectors
only)
(DVD)
(CD)
Less than detected value
(±0.001%
W
PEAK)
Inputs (VHS)
Audio
-6.0dBm,
more
Video
1.0
75
Vp-p,
than 47 kohms
ohms, unbalanced
Outputs (DVD)
VIDEO OUT
1
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync.,
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack
S-VIDEO OUT
Vp-p
75
(Y)
1.0 V
(C)
0.3 V
ohms, sync negative
(p-p),
75 Ω,
(p-p),
75 ohms
negative
Audio
output (digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (analog audio)
2.0 Vrms
(1 KHz,
0
dB),
RCA
x
jack
sync., Mini DIN
600 Ω, RCA
x
1
2
4-pin
x
1
jack (L, R)
Outputs (VHS/DVD)
Audio
-6.0dBm, less than 1 kohms
Video
1.0
Design
and
specifications
are
Manufactured under license from
to
subject
Dolby
Vp-p,
change
Laboratories.
75
ohms, unbalanced
without notice.
"Dolby",
"Pro
Logic",
and the double-D
symbol
are
trademarks of
Dolby
Laboratories.
"DTS" and "DTS
Digital
Out"
are
trademarks of
Digital
Theater
Systems,
Inc.
31
P/NO
:
3834RP0106P
Download PDF

advertising