LG | FLATRON-774FT-FB774F-EA | LG FLATRON 774FT(FB774F-EA) Owner’s Manual

Thank you for purchasing a high resolution monitor. It will give you high
resolution performance and convenient reliable operation in a variety of
video
operating modes.
Features
The monitor is
17 inches (16.0 inches viewable ) intelligent, microprocessor
compatible with most analog RGB (Red, Green, Blue) display
standards, including IBM PC , PS/2 , Apple , Macintosh , Centris , Quadra , and
Macintosh II family.
a
based monitor
The monitor
provides crisp text and vivid color graphics with VGA, SVGA, XGA,
Ergonomic modes (non-interlaced), and most Macintosh compatible
color video cards when used with the appropriate adaptor. The monitor's wide
compatibility makes it possible to upgrade video cards or software without
purchasing a new monitor.
and VESA
Digitally controlled auto-scanning is done with the micro-processor for horizontal
frequencies between 30 and 70kHz, and vertical scan frequencies
scan
between 50-160Hz.
This monitor is
dots and
a
capable of producing a maximum horizontal resolution of 1280
maximum vertical resolution of 1024 lines.
We
accomplished to adapt the advanced design and technology to the monitor.
on the front panel are simple and allow you to conveniently
adjust a variety of image controls. The absolute flat screen and screen surface
treatment eliminate distracting glare.
Soft touch buttons
Plug and play capability if supported by your system.
This monitor has DDC 2B function.*
Compliant with
-
-
-
the
following regulated specifications
:*
EPA ENERGY STAR
Swedish MPR II
Swedish TCO'99
*For detailed information, please refer to
the Reference Guide
provided
.
Connecting
the Monitor
On the back of the monitor
plug-in connections; one for the AC
power cord, and the other for the signal cable from the video card.
1
2
are
two
Power off both the monitor and PC.
Connect the 15 pin VGA connector of the supplied signal cable to the output
on the PC and the matching input connector on the rear
VGA video connector
of the monitor. The connectors will mate only one way. If you cannot attach
easily, turn the connector upside down and try again. When mated,
the cable
tighten the thumbscrews
2'
to secure the connection.
appropriate MAC to VGA adapter block at your local computer
adapter changes the high density 3 row 15 pin VGA connector to
the correct 15 pin 2 row connection to mate with your MAC. Attach the other
end of the signal cable to the side of the adapter block with 3 rows.
Locate the
store. This
Connect the attached adapter block/signal cable to the video output
MAC.
3
on
your
One end of the AC power cord is connected into the AC power connector on
the back of the monitor. The other end is plugged into a properly grounded
three-prong AC outlet.
4
5
Power
If you
on
see
the PC, then the monitor.
the SELF DIAGNOSTICS message, check the
signal cable and
connectors.
6
After using the system, power off the monitor, then the PC.
IBM PC
MACINTOSH
Mac
D-15P
2
2'
Adapter
D-15P
3
Power Cord
Signal
Cable
*
NOTE
:
For
Apple
Macintosh use,
separate plug adapter is needed
change the
15
a
to
pin high density (3 row)
D-sub VGA connector on the supplied
cable to a 15 pin 2 row connector.
A2
Location and Function of Controls
Front View
SET Button
Power Indicator
Power Button
OSD Button
Buttons
Put the
not
Rear View
keyboard here while
using the computer.
you
are
ID Label
D-Sub
AC Power
Socket
A3
Signal Connector
Control Panel Function
Front Panel Controls
OSD Button
Buttons
Power Button
<Shortcut
?
100
100
Power Indicator
Keys>
Brightness and Contrast can be adjusted directly without
entering the On Screen Display (OSD) system. Press the
buttons to display the menu and then the
buttons to adjust the settings. To save all changes, press
the OSD button. The Brightness and Contrast functions
are also available in the On Screen Display (OSD) menu.
Control
OSD Button
SET Button
Function
Use this button to enter
or
exit the
on screen
display.
Use these buttons to choose
Buttons
SET Button
the
on screen
Use this button to enter
screen
or
adjust
items in
display.
a
selection in the
on
display.
off.
Power Button
Use this button to turn the monitor
Power (DPMS)
Indicator
The power indicator light is shown in the power
button. This Indicator lights up green when the
monitor operates normally. If the monitor is in
on or
DPM (Energy Saving) mode (stand-by/
suspend/ off), this indicator color changes
amber.
A4
to
On Screen
Display (OSD) Control Adjustment
Making adjustments to the image size, position and operating parameters of
the monitor are quick and easy with the On Screen Display Control system.
A quick example is given below to familiarize you with the use of the controls.
Following section is an outline of the available adjustments and selections you
can make using the OSD.
NOTE
Allow the monitor to stabilize for at least 30 minutes before
To make
12
adjustments
Display, follow these steps:
Press the OSD Button, then the main
To
access a
becomes
control,
use
highlighted,
Use the
345
in the On Screen
the
menu
of the OSD appears.
Buttons. When the icon you want
or
press the SET Button.
Buttons to
adjust the item
to the desired level.
Accept the changes by pressing the SET Button.
Exit the OSD
making image adjustment.
by pressing the OSD Button.
A5
On Screen
Display(OSD)
Selection and
Adjustment
procedure of selection and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the items that are shown on the Menu.
You
were
introduced to the
OSD
Adjust
Description
BRIGHTNESS CONTRAST
Brightness
Used to adjust the brightness
100
of the
screen.
Contrast
100
Adjust the display to the contrast desired.
Vertical Position
POSITION
To
move
66
image
up and down.
Horizontal Position
45
To
move
picture image left
and
right.
Vertical Size
SIZE
To
49
adjust image height.
Horizontal Size
64
To
adjust image width.
Tilt
SHAPE
To correct
image
rotation.
Side Pincushion
To correct the
Side
bowing
pincushion
in and out of the
image.
balance
To correct the balance of both sides
bowling.
Parallelogram
This control
screen
adjusts
image.
for
a
skewing
of the
Trapezoid
To correct
Corner
geometric distortion.
Top
To correct the
irregular distortion
displayed image.
of the
Corner Bottom
To correct the
irregular distortion
displayed image.
A6
of the
COLOR
PRESET
6500K
9300K
PRESET 6500K / 9300K
To appear the displays color
TEMP
?
6500K
:
?
9300K
:
temperature.
Slightly reddish white.
Slightly bluish white.
RED
GREEN
BLUE
SETUP
VIDEO LEVEL
0.7V
LANGUAGE
ENGLISH
OSD POSITION
TEMP
User easily color set without
Green and Blue (R/G/B).
RED
To set your
own
color levels.
GREEN
To set your
own
color levels.
BLUE
To set your
own
color levels.
adjustment Red,
VIDEO LEVEL This item is used to select the monitor's input
signal level. The normal level used for most
PC's is 0.7V. When the screen suddenly gets
brightened or blurry, please select 1.0V and
try again.
LANGUAGE To choose the
names are
OSD POSITION To
language
displayed.
adjust position
in which the control
of the OSD window
on
the
screen.
DEGAUSS To
SPECIAL
DEGAUSS
ON
RECALL
ON
MOIRE
H: 0/V: 0
PURITY
50
manually demagnetize the screen which
some image or color incorrectly.
may show
RECALL
68.6kHz/85.0Hz
PRESET MODE
You can use this function when you want to
go back to the screen display of the time you
purchased the product after adjusting to
modify it in the Preset Mode.
When you are in the User mode, you can
recall only
items.
After using Recall, adjust the screen display
again if necessary. If you want more
information on the Preset Mode, refer to A8
,
,
,
,
,
page.
MOIRE
This item allows you to reduce the moire
(Moire is caused by interference Horizontal
Scan Line with the periodical dot screen). It
is normally OFF(H:0/V:0).
The moire adjustments may affect the focus
of the screen. The screen image may shake
slightly while the moire reduction function is
on.
PURITY
Use to adjust the overall purity of the
if the color appears uneven.
image
Video
Modes
Memory
The monitor has 34 memory locations for
factory preset to popular video modes.
display modes, 10 of which are
Display Modes (Resolution)
Display Modes (Resolution)
Horizontal
Freq.(kHz)
Vertical
Freq.(Hz)
VESA
640
x
480
37.50
800
x
600
46.88
75
VESA
800
x
600
53.68
85
1234
VESA
VESA
1024
*5
VESA
640
x
*6
VESA
*7
VESA
*8
75
68.677
85
400
31.47
70
640
x
480
31.47
60
800
x
600
37.88
60
VESA
640
x
480
43.27
85
*9
VESA
1024
768
60.02
75
*10
VESA
1024
63.98
60
1280
x
x
x
768
*
Pre-loaded mode
User Modes
Modes 11-34
are
empty and
can
accept
new
video data. If the monitor detects
video mode that has not been present before or is not one of the preset
modes, it stores the new mode automatically in one of the empty modes
a new
starting with mode
11.
If you use up the 24 blank modes and still have more new video modes, the
monitor replaces the information in the user modes starting with mode 11.
Recalling Display Modes
When your monitor detects a mode it has seen before, it automatically recalls
the image settings you may have made the last time you used that mode.
You may, however, manually force a recall of each of the 10 preset modes by
pressing the Recall button. All preset modes are automatically recalled as the
monitor
The
senses
the
incoming signal.
ability to recall the preset modes is dependent
on
the
signal coming from
factory
your PC's video card or system. If this signal does not match any of the
modes, the monitor automatically sets itself to display the image.
A8
Troubleshooting
Check the
following before calling for service.
SELF DIAGNOSTICS message.
The signal cable is not connected, or is loose. Check and
secure
the connection.
OUT OF FREQUENCY message appears.
The frequency of the signal from the video card is outside the operating
range of
the monitor.
*
Horizontal
*
Vertical
Use the
Frequency : 30-70kHz
Frequency : 50-160Hz
graphics board's utility software
graphics board).
to
change the frequency setting (Refer
to the manual for
The power LED is illuminated amber.
Display power management mode.
There is no active signal coming from the PC.
The signal cable is not fastened securely.
Check the computer power and graphics adapter configuration.
image on the SCREEN is
rectangle shape.
The
Image adjustment has
not
not been done
Use the OSD, SET and
centered,
yet in the
or
too
small,
or
not a
operating mode.
image to your liking.
current
buttons to set the
The monitor doesn't enter the power saving off mode (Amber).
Computer video signal is not VESA DPMS standard. Either the PC or the video
controller card is not using the VESA DPMS power management function.
An abnormal
picture is displayed on the screen. For example, the
picture may be missing or dark.
upper part of the
If
using certain non-VESA Standard video card, an abnormal picture may be
displayed. Try setting it to one of the factory preset modes, or selecting to a
resolution and refresh rate within the specification limits of the monitor.
NOTE
If the power indicator(LED)
the monitor.
light
is
blinking amber,
Then press a power ON/OFF button
technician for more information.
on
the front
A9
may result in abnormal condition of
panel
control and call your service
Specifications
Picture Tube
17 inch (16.0 inches viewable) Perfect Flat Tube
90
degree deflection
0.24mm Slot
pitch
W-ARAS(Wide Anti-Reflective Anti-Static) coating
Sync Input
Horizontal
Vertical
Video
Input
Freq.
Freq.
30
50
-
-
70kHz (Automatic)
160Hz (Automatic)
Input Form
Separate, TTL, Positive/Negative
Signal Input
15
Input Form
Separate, RGB Analog, 0.7Vp-p/75 ohm,
pin D-Sub Connector
Resolution(max) 1280
x
1024@60Hz
Power
Normal
≤
74W
Consumption
Stand-by/Suspend
≤
15W
Power Off
≤3W
Dimensions
Width
42.0
cm
/ 16.5 inches
tilt/ swivel
Height
46.6
cm
/ 18.3 inches
Depth
44.3
cm
/ 17.4 inches
Power
(with
stand)
Input
AC 100-240V 50/60Hz 2.0A
Weight
Net
Environmental
Operating
Conditions
20
kg (44.1 lbs)
Condition
Temperature
10 ˚C to 40 ˚C
Humidity
10 % to 90 %
non-Condensing
Condition
Storage
Temperature
Humidity
0 ˚C to 60 ˚C
5 % to 90 %
non-Condensing
NOTE
Information in this document is
subject to change without
A10
notice.
Positive
Download PDF

advertising