LG | FLATRON-793FT-FB793C-EP | LG FLATRON 793FT(FB793C-EP) Owner’s Manual

ENGLISH
Funzione del Pannello di Controllo.......................D5
Introduction ...........................................................A1
Controllo
the Monitor.........................................A2
Connecting
Making use of USB (Universal Serial Bus).............A3
Regolazione On Screen Display (OSD)D6
e
Regolazione dell'OSD.....D7
Elementi di Selezione
Modalita di Memoria Video ................................D11
Location and Function of Controls ........................A4
In Caso di Problemi .............................................D12
Control Panel Function ..........................................A5
Specifiche .............................................................D13
Display (OSD) Control Adjustment ....A6
Display(OSD) Selection
On Screen
On Screen
and
Adjustment .....................................................A7
Memory Modes .........................................A11
ESPANOL
Introduccion ...........................................................E1
Video
Conectando del Monitor ........................................E2
Troubleshooting ...................................................A12
Specifications .......................................................A13
Utilizacion del USB (Bus de serie universal)......E3
DEUTSCH
Einleitung ................................................................B1
Ubicacion y Funcion de los Controles ...................E4
Funcion del Panel de Control .................................E5
Ajuste del Control de Exhibicion en Pantalla (OSD) .......E6
Ajuste del OSD y Seleccion de Elementos .............E7
Anschließen ............................................................B2
Modos de Memoria de Video ...............................E11
des USB (Universal Serial Bus) ........B3
Sugerencias para Localizar las Fallas ...................E12
Especificaciones ....................................................E13
Verwendung
Ort und Funktion der
..........B4
Bedienungselemente
Bedienungselemente der Bildkontrolle ..................B5
On Screen Display (OSD) Anpassung ...................B6
OSD Einstellung und Auswahlsymbole .................B7
Videospeichermodi ..............................................B11
Storungen
.............................................................B12
Produktbeschreibung ...........................................B13
FRANCAIS
PORTUGUES
Introducao...............................................................F1
Conectando
o
Monitor ...........................................F2
Utilizacao de USB (Universal Serial Bus) ..........F3
Posicao dos Controles e Descricao ........................F4
Funcoes do Painel de Controle
..............................F5
Introduction ...........................................................C1
Ajuste On Screen Display(OSD) ............................F6
Ajustes OSD e Itens de Selecao .............................F7
Branchement du Moniteur ....................................C2
Modos de Memoria de Video ...............................F11
Utilisation du USB (Bus
serie universel) .......C3
Resolvendo Problemas..........................................F12
Nomenclature et Fonctions ...................................C4
Especificacoes .......................................................F13
en
Fonctions du Paneau de Commande .....................C5
Reglage des Commandes Affichage Ecran .............C6
Options de selection et de Reglage
OSD (affichage ecran) ..........................................C7
Mise
en
Memoire de Modes Video......................C11
Conseils
Quelques
Specifications
en
Cas D'incident .................C12
D'entree ........................................C13
ITALIANO
Introduzione ..........................................................D1
Collegamento
del Monitor ....................................D2
Utilizzo dell'USB (Universal Serial Bus) ..........D3
Posizione
e
Funzione dei Conando di Controllo ..D4
NEDERLANDS
Inleiding .................................................................N1
De Monitor Aansluiten ..........................................N2
Gebruikmaken
van
de USB (Universele Seriele Bus).....N3
plaatsing en de werking van de knoppen ........N4
Het bedieningspaneel ............................................N5
Bediening via het beeldscherm OSD
(On Screen Display) ..............................................N6
De
Kiezen
Modi
en
instellen via het
OSD-systeem ..............N7
videogeheugen...................................N11
Problemen oplossen ............................................N12
Specificaties .........................................................N13
voor
Thank you for purchasing a high resolution monitor. It will give you high
resolution performance and convenient reliable operation in a variety of
video
operating modes.
Features
The monitor is
17 inches
(16.0
inches viewable
) intelligent, microprocessor
compatible
analog RGB (Red, Green, Blue) display
standards, including IBM PC , PS/2 , Apple , Macintosh , Centris , Quadra , and
Macintosh II family.
a
based monitor
with most
The monitor
provides crisp text and vivid color graphics with VGA, SVGA, XGA,
Ergonomic modes (non-interlaced), and most Macintosh compatible
color video cards when used with the appropriate adaptor. The monitor's wide
compatibility makes it possible to upgrade video cards or software without
purchasing a new monitor.
and VESA
Digitally controlled auto-scanning is done with the micro-processor for horizontal
frequencies between 30 and 96kHz, and vertical scan frequencies
scan
between 50-160Hz.
This monitor is
dots and
a
capable
of
producing
a
maximum horizontal resolution of 1600
maximum vertical resolution of 1200 lines.
The
microprocessor-based digital controls allow you to adjust conveniently a
variety of image controls by using the OSD (On Screen Display).
USB
(Universal Serial Bus) ports at the back of the monitor are prepared for the
can easily and flexibly connect USB-designed devicessuch as a mouse, keyboard or printer- to the monitor for true Plug and Play
USB cable and hub. You
function.*
Plug
and
play capability
if
supported by your system
This monitor has DDC 1 and DDC 2B function.**
Compliant with
-
-
-
the
following regulated specifications
:**
EPA ENERGY STAR
Swedish MPR II
Swedish TCO'99
*
**
Applies to 793FT plus only.
For detailed information,
please refer to the Reference Guide provided
.
the Monitor
Connecting
On the back of the monitor
power
1
2
cord,
are
plug-in connections; one for the AC
signal cable from the video card.
two
and the other for the
Power off both the monitor and PC.
Connect the 15
pin VGA connector of
VGA video connector
on
the
supplied signal
cable to the output
only one way. If
the PC. The connectors will mate
you cannot attach the cable easily, turn the connector upside down and try
again. When mated, tighten the thumbscrews to secure the connection.
2'
appropriate MAC to VGA adapter block at your local computer
adapter changes the high density 3 row 15 pin VGA connector to
the correct 15 pin 2 row connection to mate with your MAC. Attach the other
end of the signal cable to the side of the adapter block with 3 rows.
Locate the
store. This
Connect the attached
cable to the video output
adapter block/signal
on
your
MAC.
3
One end of the AC power cord is connected into the AC power connector on
the back of the monitor. The other end is plugged into a properly grounded
three-prong AC outlet.
4
5
Power ON the PC, then the monitor.
If you
see
the SELF DIAGNOSTICS message, check the
signal
cable and
connectors.
6
After
using
the system, power OFF the monitor, then the PC.
IBM PC
MACINTOSH
2'
2
Mac
D-15P
3
Power Cord
Applies
to 793FT
Signal
Adapter
MAC6
D-15P
plus only.
Cable
*
NOTE
:
For
Apple
Macintosh use,
separate plug adapter is needed
change the
15
pin high density (3 row)
on the supplied
pin 2 row connector.
D-sub VGA connector
cable to
A2
a
15
a
to
Making
use
of USB
(Universal Serial Bus)- Applies to 793FT plus only
(Universal Serial Bus) is an innovation in connecting your different
desktop peripherals conveniently to your computer. By using the USB, you will
be able to connect your mouse, keyboard, printer, and other peripherals to your
monitor instead of having to connect them to your computer. This will give you
greater flexibility in setting up your system. USB allows you to connect chain up
to 120 devices on a single USB port, and you can "hot" plug (attach them while
the computer is running) or unplug them while maintaining Plug and Plug auto
detection and configuration. This monitor has an integrated self-powered USB
hub, allowing up to 4 other USB devices to be attached it.
USB
USB connection
1.
Connect the upstream port of the monitor to the downstream port of the USB
compliant PC or another hub using the USB cable (Computer must have a
2.
Connect the USB
USB
port).
compliant peripherals
to the downstream
ports of the
monitor.
USB downstream Ports
connect the cables from USB
compliant peripherals-such
keyboard, mouse, printer,
as
scanner, etc
USB
upstream
Port
etc.
mouseprinter
keyboard
To USB downstream
the USB
port of
PC
or
To activate the USB hub function, the monitor must be connected to
PC(OS) or another hub with the USB cable(enclosed).
a
compliant
another hub cable
NOTE
When connecting the USB cable, check that the
side matches the shape at the connecting side.
shape
USB
compliant
of the connector at the cable
When the monitor is not plugged into an electric socket, the
the downstream ports will not operate.
peripherals connected to
Even if the monitor is in a power saving mode, USB compliant devices will function
when they are connected the USB ports(both the upstream and downstream) of the
monitor.
A3
Location and Function of Controls
Front View
OSD
SET
Power Button
Power Indicator
SET Button
Buttons
OSD Button
Rear View
ID Label
USB upstream
USB downstream
ports*
AC Power Socket
D-Sub
Signal
Cable
*
A4
Applies
to 793FT
port*
plus only.
Control Panel Function
Front Panel Controls
SET Button
OSD Button
OSD
Power
(DPMS)
Indicator
SET
Power Button
Buttons
Control
Function
OSD Button
OSD
Use this button to enter
or
exit the
on screen
display.
Buttons
Use these buttons to choose
the
SET
SET Button
on screen
Use this button to enter
screen
or
adjust
items in
display.
a
selection in the
on
display.
Power Button
Use this button to turn the monitor
Power (DPMS)
Indicator
This Indicator
lights
on or
off.
up green when the monitor
operates normally. If the monitor is in DPM
(Energy Saving) mode (stand-by/suspend/off),
this indicator color changes to amber.
A5
On Screen
Display (OSD) Control Adjustment
Making adjustments to the image size, position and operating parameters of
the monitor are quick and easy with the On Screen Display Control system. A
quick example is given below to familiarize you with the use of the controls.
Following section is an outline of the available adjustments and selections you
can make using the OSD.
NOTE
Allow the monitor to stabilize for at least 30 minutes before
To make
adjustments
in the On Screen
Display,
follow these steps:
OSD
SET
OSD
12
acces a
becomes
control,
Accept
use
the
highlighted, press
Use the
345
SET
Press the OSD Button, then the main
To
making image adjustment.
the
or
changes by pressing
by Pressing
of the OSD appears.
Buttons. When the icon you want
the SET Button.
Buttons to
Exit the OSD
menu
adjust
the item to the desired level.
the SET Button.
the OSD Button.
A6
On Screen
You
were
Display(OSD)
introduced to the
Selection and
Adjustment
procedure of selection and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the items that are shown on the Menu.
OSD
Adjust
Description
BRIGHTNESS CONTRAST
Brightness
Used to adjust the brightness of the screen.
66
92
Contrast
Adjust the display to the contrast desired.
COLOR
PRESET
6500K
PRESET
6500K/ 9300K
To appear the
9300K
?
TEMP
?
displays color temperature.
6500K:Slightly reddish white.
9300K:Slightly bluish white.
RED
GREEN
User easily color set without
Green and Blue (R/G/B).
TEMP
BLUE
adjustment Red,
RED
GREEN
To set your
own
color levels.
BLUE
POSITION
Vertical Position
To
move
66
image
up and down.
Horizontal Position
45
To
SIZE
move
picture image left
Vertical Size
To
49
adjust image height.
Horizontal Size
64
To
A7
adjust image width.
and
right.
On Screen
Display(OSD)
OSD
Selection and
Adjust
Adjustment
Description
SHAPE
Side Pincushion
To correct the
bowing
in and out of the
image.
Side
pincushion
balance
To correct the balance of both sides
bowing.
Trapezoid
SHAPE
To correct
geometric
distortion.
Parallelogram
This control
the
screen
Top
adjusts
image.
for
skewing
of
Corner
To correct the
irregular
displayed image.
the
a
distortion of
Bottom Corner
To correct the
irregular
displayed image.
the
distortion of
Tilt
To correct
Pin W
image
rotation.
Adjust
To correct the balance of both sides
W
bowing.
Pin S
Adjust
To correct the balance of both sides
S
A8
bowing.
On Screen
Display(OSD)
OSD
Selection and
Adjust
Description
SETUP
VIDEO LEVEL
0.7V
DDC
ON
LANGUAGE
ENGLISH
OSD POSITION
CLAMP
Adjustment
SEP
VIDEO LEVEL This item is used to select the
monitor's input signal level. The
normal level used for most PC's is
0.7V.
When the screen suddenly gets
brightened or blurry, please select
1.0V and try again.
To select the DDC
DDC
LANGUAGE
function(ON/OFF).
To choose the language in which
the control names are displayed.
OSD Menus
are
available in 8
language: English, Deutsch,
Francais, Espanol, Italiano,
Svenska, Suomi and Portugues.
OSD POSITION To adjust position of the OSD
window on the screen.
CLAMP
In
case
Green)
of
input SOG(Sync On
Signal, the back
Video
raster will appear the green. Then,
SOG(Sync On Green)
to select the
A9
in the
take you back to
the
clamp, will
original back
raster.
On Screen
Display(OSD)
OSD
Selection and
Adjust
Adjustment
Description
SPECIAL
DEGAUSS To
DEGAUSS
ON
RECALL
ON
MOIRE
H: 0/V: 0
CONVERGENCE
H:50
PURITY
50
manually demagnetize the
some image
incorrectly.
which may show
RECALL
54.4kHz/60.0Hz
You
can use
screen
or
color
this function when you want
display of the
purchased the product after
adjusting to modify it in the Preset Mode.
to go back to the screen
USER MODE
time you
When you
recall
in the User
are
only
,
,
mode, you
,
,
can
,
,
convergence items. After
adjust the
screen
using Recall,
display again if
necessary. If you want
on
MOIRE
more
information
the Preset Mode, refer to A11 page.
This item allows you to reduce the
moire (Moire is caused by
interference Horizontal Scan Line with
periodical dot screen). It is
normally OFF(H:0/V:0).
The moire adjustments may affect
the
focus of the
the
screen.
The screen image may shake slightly
while the moire reduction function is
on.
CONVERGENCE This item allows you to adjust the
horizontal convergence.
The horizontal convergence control
adjust the alignment of the red and
blue horizontal fields.
PURITY
A10
Use to
adjust
image
if the color appears
the overall
purity
of the
uneven.
The monitor has 37 memory locations for
factory preset to popular video modes.
Preset Modes
display modes, 12 of which are
(Resolution)
832
x
624
49.725
75
VESA
1280
x
1024
79.976
75
123456789
VESA
720
x
400
31.469
70
VESA
640
x
480
31.469
60
VESA
640
x
480
43.269
85
MAC
1152
MAC
VESA
1280
x
x
870
68.681
75
1024
91.146
85
85
864
77.487
VESA
1600
x
1200
93.750
75
10
VESA
800
x
600
53.674
85
11
VESA
1024
x
768
60.023
75
12
VESA
1024
x
768
68.677
85
VESA
1152
x
User Modes
Modes 13-37
are
empty and
can
accept
new
video data. If the monitor detects
video mode that has not been present before or is not one of the preset
modes, it stores the new mode automatically in one of the empty modes
a new
starting with
mode 13.
If you use up the 25 blank modes and still have more new video modes, the
monitor replaces the information in the user modes starting with mode 13.
Recalling Display Modes
When your monitor detects a mode it has seen before, it automatically recalls
the image settings you may have made the last time you used that mode.
You may, however, manually force a recall of each of the 12 preset modes by
pressing the Recall button. All preset modes are automatically recalled as the
monitor
The
senses
ability to
the
incoming signal.
recall the preset modes is
dependent
on
the
signal coming from
factory
your PC's video card or system. If this signal does not match any of the
modes, the monitor automatically sets itself to display the image.
Check the
following before calling for service.
SELF DIAGNOSTICS message.
The signal cable is not connected, or is loose. Check and
secure
the connection.
OUT OF FREQUENCY message appears.
The frequency of the sync input is outside the operating range of the monitor.
*Horizontal
*Vertical
Use the
Frequency : 30-96kHz
Frequency : 50-160Hz
graphics
to the manual for
board's
utility software
graphics board).
to
change
the
frequency setting (Refer
The power LED is illuminated amber.
Display power management mode.
There is
no sync signal and the signal cable is not fastened securely.
Check the computer power and graphics adapter configuration.
image on the SCREEN is
rectangle shape.
The
Image adjustment
not been done
OSD, SET and
not
centered,
yet in the
buttons to set the
current
image
The monitor doesn't enter the power
or
too
small,
operating mode.
liking.
or
not a
Use the
to your
saving off mode (Amber).
Computer video signal is not VESA DPMS standard. Either the PC or the video
using the VESA DPMS power management function.
controller card is not
Specifications
Picture Tube
17 inch
(16.0 inches viewable) Perfect Flat
degree deflection
0.24mm Slot pitch
ARAS(Anti-Reflective Anti-Static) coating
Tube
90
Sync Input
Horizontal
Freq.
Vertical Freq.
Input Form
30
96kHz
Signal Input
(Automatic)
(Automatic)
TTL,
Separate
Positive/Negative
Composite TTL, Positive/Negative
SOG (Sync On Green)
15 pin D-Sub Connector
50
-
160Hz
-
RGB Analog,
Input Form
Separate,
Resolution(max)
1600
USB
USB standard
Rev. 1.1
specifications
Downstream power supply 500mA for each (MAX)
Communication speed 12 Mbps (full), 1.5 Mbps
Video
-
Input
Applies to
793FT plus only.
USB port
1
x
0.7Vp-p/75 ohm,
complied self-powered
(low)
ports
Power
Normal(Max.)
≤ 110W
Consumption
Stand-by/Suspend
≤
8W
Power Off
≤
3W
Dimensions (with
tilt/ swivel stand)
Width
41.50
cm
/ 16.3 inches
Height
Depth
43.90
cm
/ 17.3 inches
43.50
cm
/ 17.1 inches
Europe
AC 200-240V 50Hz 1.5A
Others
AC 100-240V 50/60Hz 2.0A
Input
(120W)
(30W)
(20W)
*(
The
products should be used according
requirements of each ID LABEL.
19.2
Net
Environmental
Conditions
Operating Condition
10 ˚C to 40 ˚C
Temperature
10 % to 90 % non-Condensing
Humidity
kg (42.3 lbs)
Storage Condition
0 ˚C to 60 ˚C
Temperature
5 % to 90 % non-Condensing
Humidity
NOTE
subject
to
change without
A13
notice.
): with
USB
to the Power
Weight
Information in this document is
hub
Upstream port
4 Downstream
Power
Positive
1200@75Hz
Download PDF

advertising