LG | FLATRON-LCD-575LE-LB565B-EA | LG FLATRON LCD 575LE(LB565B-EA) Owner’s Manual

ENGLISH
Introduction.......................................................................................................................................................A1
Connecting the Monitor ....................................................................................................................................A2
Location and Function of Controls
Control Panel Function
On Screen
On Screen
Video
..............................................................................................
.........................................................................................................
.....................A3
............................A4
Display (OSD) Control Adjustment................................................................................................A5
Display(OSD) Selection and Adjustment ......................................................................................A6
Memory Modes.......................................................................................................................................A8
Troubleshooting.................................................................................................................................................A9
Specifications.....................................................................................................................................................A1
FRANCAIS
Introduction.......................................................................................................................................................C1
Branchement du Moniteur................................................................................................................................C2
Nomenclature et Fonctions...............................................................................................................................C3
Fonctions du Paneau de Commande ................................................................................................................C4
Reglage des Commandes Affichage Ecran
Options de selection et de Reglage OSD (affichage ecran)
..........................................................................................
Mise
en
..............C5
............................................................................C6
Memoire de Modes Video ...................................................................................................................C8
Quelques Conseils en Cas D'incident............................................................................................ ...................C9
Specifications D'entree ...................................................................................................................................C10
ESPANOL
Introduccion.......................................................................................................................................................E1
Conectando el Monitor......................................................................................................................................E2
Ubicacion y Funcion de los Controles ..............................................................................................................E3
Funcion del Panel de Control
.........................E4
...................................................................................................
Ajuste del Control de Exhibicion en Pantalla (OSD) ..................................................................................................E5
Ajuste del
OSD y Seleccion de Elementos ........................................................................................................E6
Modos de Memoria de Video ............................................................................................................................E8
Sugerencias para Localizar las
Especificaciones
Fallas .................................................................................................................E9
...............................................................................................................
................................E10
PORTUGUES
Introducao ..........................................................................................................................................................F1
Conectando
Posicao
o
Monitor
dos Controles
...........................................................................................................
e
Descricao
Funcoes do Painel de Controle
Ajuste
Ajustes OSD e
On Screen
...........................F2
...................................................................................................................F3
.........................................................................................................................F4
Display(OSD) .......................................................................................................................F5
Itens de
Selecao
........................................................................................................................F6
Modos de Memoria de Video ............................................................................................................................F8
Resolvendo Problemas .......................................................................................................................................F9
Especificacoes ..................................................................................................................................................F10
Introduction
The FLATRON LCD 575LE/LS/MS Flat Panel Monitor has
matrix TFT
an
active
LCD
(Thin-Film Transistor)
(Liquid Crystal Display).
designed for use in small working areas or for those who need
more working space on the desk.
ENGLISH
This monitor is
Features
The FLATRON LCD 575LE/LS is
micropro-cessor based
The FLATRON LCD 575MS is
micropro-cessor based
a
15.1-inch
(15.1
inches
viewable) intelligent
monitor.
a
15.0-inch
(15.0
inches
viewable) intelligent
monitor.
Digitally controlled auto-scanning is done with the microprocessor for horizontal
frequencies between 31 and 61kHz, and vertical scan frequencies
scan
between 56 and 75Hz.
The
microprocessor-based digital controls allow you to adjust conveniently a
variety of image controls by using the OSD (On Screen Display).
It supports resolutions up to 1024x768, and has a wide viewing angle of ±60
horizontal and ±45 degrees vertical (FLATRON LCD 575LE/LS).
degrees
It supports resolutions up to 1024x768, and has a wide viewing angle of ±60
horizontal and +45, --40 degrees vertical (FLATRON LCD 575MS).
degrees
The monitor is
shipped
with 14
factory pre-programmed
resident. In addition, there
of 30 memory modes.
permanently
Plug
and
play capability
if
are
video modes that
16 user-storable modes, for
a
are
total
supported by your system.
This monitor has DDC 2B function.*
Compliant with
-
-
the
following regulated specifications
:*
EPA ENERGY STAR
Swedish TCO'99
*For detailed information, please refer to
A1
the Reference Guide provided
.
Connecting
the Monitor
To set up the
monitor,
ensure
that the power is turned off to the
monitor,
computer system, and other attached devices, then follow these steps:
Place the monitor in
1
234
a
convenient, well-ventilated location
Power off both the monitor and
Slightly
press and
pull
the latch
near
your computer.
Computer.
on
Stand
cover.
Connect the end of monitor signal cable to the connector 1 at the rear panel
of your monitor throught the slot and cable holder on Stand. Connect the other
end to the 15-pin connector on the rear panel of the computer and tighten the
screws. Be sure the signal cable aligns with the 15-pin connector.
4' Connect the end of monitor signal cable to the connector 1 at the rear panel
of your monitor throught the slot and cable holder on Stand. Connect the other
end of the monitor signal cable to the rear panel of Macintosh computer
through a Macintosh adapter and then tighten screws.
5 Connect the plug from the AC adapter into the base of the monitor. 2
Connect one end of the AC power cord to the AC adapter 3 and the other
end to a properly grounded AC outlet that is easily accessible and close to the
monitor. 4
6 After connecting cables, put stand cover correctly into the holes unders stand.
If securely connected, you can hear click sound from the latch.
789
Power ON the PC, then the monitor.
If you
After
see
the NO SIGNAL message, check the
using
signal
cable and connectors.
the system, power OFF the monitor, then the PC.
12
Latch
MACINTOSH
Mac
Adapter
IBM PC
Stand
4
3
D-15P
AC
D-15P
Signal
cover
Power Cord
adapter
Cable
*NOTE:Ifyou
see
the "OUTOF
RANGE" message, check to make sure
your system is set to one of the factory
preset modes.(see page A8)
A2
Location and Function of Controls
Front View
Power Button
Power Indicator
AUTO/SET Button
Buttons
OSD Button
VESA wall
mounting
Connected to another
Rear View
object (stand type
wall-mounted
DC Power Connecter
+
-
-
and
type
optional)
12V
D-Sub
Signal
Connector
Kensington Security Slot
a locking
Connected to
cable that
Stand Cover
NOTE
:
This monitor
accept
a
75mm
x
75mm
A3
can
be
purchased separately
most
computer
VESA-compliant mounting
at
stores
interface
pad.
Control Panel Function
Front Panel Controls
Buttons
Power Button
OSD Button
Power
AUTO/SET Button
Control
(DPMS) Indicator
Function
Use this button to enter and from the
OSD Button
Buttons
Use these buttons to choose
the
on
display (OSD).
screen
on screen
or
adjust
items in
display.
<Shortcut
?
100
100
AUTO/SET Button
Keys>
Brightness and Contrast can be adjusted directly without
entering the On Screen Display (OSD) system. Touch
the
buttons to adjust the settings and then
the OSD button to save all changes. The Brightness
and Contrast functions
are
Screen
menu.
Display (OSD)
Use this button to enter
*
AUTO CONFIGURATION
AUTO
selection in the
on
adjustment function
Touch the AUTO/SET button before
This button is for the automatic
position,
clock and
Note: Some
properly.
If the results
This indicator
monitor
using OSD menu.
adjustment of the screen
phase.
signal from
graphics boards may not function
unsatisfactory, adjust your monitor's
manually.
some
are
Position, Clock and Phase
Power (DPMS)
Indicator
a
display.
screen
PROCESSING
also available in the On
lights
up green when the
operates normally. If the monitor is in
DPM (Energy Saving) mode (stand-by/
suspend/power off), this indicator color
changes to amber.
Power Button
Use this button to turn the monitor
A4
on or
off.
On Screen
Display (OSD) Control Adjustment
Making adjustments to the image size, position and operating parameters of
the monitor are quick and easy with the On Screen Display Control system. A
quick example is given below to familiarize you with the use of the controls.
Following section is an outline of the available adjustments and selections you
can make using the OSD.
NOTE
Allow the monitor to stabilize for at least 30 minutes before
To make
12
3
45
adjustments
in the On Screen
Display,
Press the OSD Button, then the main
To
access a
becomes
control,
the
highlighted, press
Use the
Accept
use
the
Buttons to
by Pressing
follow these steps:
of the OSD appears.
Buttons. When the icon you want
the
AUTO/SET Button.
adjust
changes by pressing
Exit the OSD
menu
making image adjustment.
the item to the desired level.
the AUTO/SET Button.
the OSD Button.
A5
On Screen
You
Display(OSD)
introduced to the
were
Selection and
Adjustment
procedure of selection and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the items that are shown on the Menu.
OSD
Adjust
Description
Brightness
BRIGHTNESS CONTRAST
Used to
88
adjust
the
brightness
of the
screen.
100
Contrast
the
desired.
Adjust
PRESET
COLOR
PRESET
9300K
display
9300K/ 6500K
To appear the
6500K
to the contrast
displays
color
temperature.
RED
?
GREEN
?
BLUE
9300K:Slightly
6500K:Slightly
bluish white.
reddish white.
RED
To set your
own
color levels.
GREEN
To set your
own
color levels.
BLUE
To set your
own
color levels.
POSITION
Vertical Positio
61
To
move
image
up and down.
39
Horizontal Position
To
A6
move
picture image
left and
right.
On Screen
Display(OSD)
OSD
Selection and
Adjust
Adjustment
Description
CLOCK
TRACKING
To minimize any vertical bars
stripes visible on the screen
background.The horizontal
change.
CLOCK
or
screen
size will also
PHASE
To
PHASE
adjust
the focus of the
display.
This item allows you to remove any
horizontal noise and clear or sharpen
the
LANGUAGE To choose the
SETUP
control
LANGUAGE
of characters.
image
language in which
displayed.
the
names are
ENGLISH
OSD POSITION
ON
BEEP
ELAPSED TIME
OSD POSITION To
0H
on
1024x768/70Hz
adjust position
the
of the OSD window
screen.
PRESET MODE
BEEP
To select
ELAPSED TIME To
A7
beep
display
the
ON
use
or
OFF.
time of monitor
Video
Memory
Modes
The monitor has 30 memory locations for
factory preset to popular video modes.
display modes,
14 of which
are
Display Modes (Resolution)
Display Modes (Resolution)
123456789
Horizontal
Freq.(kHz)
Vertical
Freq.(Hz)
VGA
640
x
350
31.47
70
VGA
720
x
400
31.47
70
VGA
640
x
480
31.47
60
MAC
640
x
480
35.00
67
VESA
640
x
480
37.86
73
VESA
640
x
480
37.50
75
VESA
800
x
600
35.16
56
VESA
800
x
600
37.88
60
VESA
800
x
600
48.08
72
10
VESA
800
x
600
46.88
75
11
MAC
832
x
624
49.72
75
12
VESA
1024
x
768
48.36
60
13
VESA
1024
x
768
56.48
70
14
VESA
1024
x
768
60.02
75
Note
:
This LCD monitor has been
pre-adjusted to the
video mode of
VESA 1024x768 @75Hz.
User Modes
Modes 15-30 are empty and can accept new video data. If the monitor detects a
new video mode that has not been present before or is not one of the preset
modes, it stores the new mode automatically in one of the empty modes starting
with mode 15.
If you use up the 16 blank modes and still have more new video modes, the
monitor replaces the information in the user modes starting with mode 15.
A8
Check the
following before calling for service.
Display Position is incorrect.
Push the AUTO/SET Button.
If the results are unsatisfactory,
and V
On the
position
icon in the
screen
adjust the image position using
display.
background, vertical bars
or
stripes
Push the AUTO/SET Button.
If the results are unsatisfactory, decrease the vertical bars
CLOCK icon in the
on screen
or
in any
image
or
are
visible.
stripes using
characters
Push the AUTO/SET Button.
If the results are unsatisfactory, decrease the horizontal bars
on screen
position
the
display.
Any horizontal noise appearing
not clearly portraid.
icon in the
the H
on screen
using
are
the PHASE
display.
NO SIGNAL message.
The signal cable is not connected,
or
is loose. Check and
secure
the
connection.
OUT OF RANGE message appears.
Picture is blank.
The
frequency of
the
signal
from the video card is outside the
operating range
of the monitor.
Horizontal
Vertical
*
Use the
Frequency: 31kHz-61kHz
Frequency: 56Hz-75Hz
graphics board's utility software to change the frequency setting (Refer to the
graphics board).
manual for
*
You
F8
change the setup to the supported
key during booting the system).
can
resolution
using
the Safe Mode
(Press the
The power LED is illuminated amber.
The monitor is in its display power management mode.
There is
The
no
signal
active
signal coming
cable is not fastened
Check the computer power and
from the PC.
securely.
graphics adapter configuration.
saving off mode (Amber).
Computer video signal is not VESA DPMS standard. Either the PC or the video
controller card is not using the VESA DPMS power management function.
The monitor doesn't enter the power
Specifications
FLATRON LCD 575LE FLATRON LCD 575LS FLATRON LCD 575MS
Display
Type
15.1inch
(38.35cm)
Flat Panel Active
matrix-TFT LCD,
Anti-Glare
Viewable Size
Pixel
Horizontal
Input
(38.35cm)
0.3mm
x
15.1inch
(38.35cm)
0.3mm
x
16 million color
-
12.1
x
12.1
9.1inch
x
9.1inch
12.0 x 9.0inch
Separate, RGB
Separate, RGB
Separate, RGB
Analog, 0.714Vp-p/ Analog, 0.714Vp-p/ Analog, 0.714Vp-p/
Resolution
VESA1024x768/75Hzmax VESA1024x768/75Hzmax VESA1024x768/75Hzmax
75ohm, Positive
75ohm, Positive
≤ 30W
≤ 30W
≤ 30W
≤3W
≤3W
≤3W
≤3W
≤3W
≤3W
Width
39.4 cm / 15.5 inches
39.4 cm / 15.5 inches
39.4 cm / 15.5 inches
Height
Depth
37.87 cm / 14.91 inches 37.87 cm / 14.91 inches 37.87 cm / 14.91 inches
16.18 cm / 6.37 inches 16.18 cm / 6.37 inches 16.18 cm / 6.37 inches
DC 12V 3A
Weight
Net
5.0
Tilt
Down
5˚
30˚
Up
Conditions
(38.1cm)
0.297mm
Input Form
AC 100-240V 50-60Hz 1.2A~0.6A
Environmental
x
16 million color
-
Input
Output
Range
0.297
-
Adapter
AC-DC
15.0inch
-
Power Of
Input
matrix-TFT LCD,
coating Anti-Glare coating
-
Consumption Stand-by/Suspend
Power
matrix-TFT LCD,
Anti-Glare
-
Normal
Dimensions
(38.1cm)
31 61kHz (Automatic) 31 61kHz (Automatic) 31 61kHz (Automatic)
75ohm, Positive
Power
15.0inch
Flat Panel Active
0.3
16 million color
(38.35cm)
Flat Panel Active
Freq.
Freq. 56 75Hz (Automatic) 56 75Hz (Automatic) 56 75Hz (Automatic)
Input Form Separate TTL, Positive/Negative Separate TTL, Positive/Negative Separate TTL, Positive/Negative
Signal Input 15 pin D-Sub Connector 15 pin D-Sub Connector 15 pin D-Sub Connector
307 x 230mm /
307 x 230mm /
304 x 228mm /
Display Area
Vertical
Video
0.3
pitch
True color
Sync Input
15.1inch
coating
15.1inch
DC 12V 3A
-
+
kg (11.02 lbs)
Operating Condition
Temperature 10 ˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Storage Condition
Temperature -20 ˚C to 60 ˚C
5 % to 95 % non-Condensing
Humidity
NOTE
Information in this document is
subject
to
change without
A10
notice.
Download PDF