LG | M2380D-PZ | LG M2380D-PZ Owner’s Manual

ENGLISH
OWNER’S MANUAL
LED LCD MONITOR TV
Please read this manual carefully before operating
your set and retain it for future reference.
LED LCD MONITOR TV MODELS
M2080D
M2280D
M2380D
M2780D
M2080DF
M2280DF
M2380DF
M2780DF
M2080DB
M2280DB
M2380DB
M2080DN
M2280DN
M2380DN
M2780DN
www.lg.com
CONTENTS
PREPARATION
CONTENTS
FRONT PANEL CONTROLS...............................4
BACK PANEL INFORMATION.............................6
STAND INSTALLATION.......................................8
DETACHING STAND.........................................11
DETACHING STAND BODY..............................14
WALL MOUNT : HORIZONTAL INSTALLATION........15
DESKTOP PEDESTAL INSTALLATION............16
POSITIONING YOUR DISPLAY........................17
SWIVEL STAND(Only M2780D / M2780DF).....17
LOCATION.........................................................17
KENSINGTON SECURITY SYSTEM................18
EXTERNAL EQUIPMENT SETUP
ANTENNA CONNECTION.................................19
HD RECEIVER SETUP.....................................20
DVD SETUP.......................................................23
VCR SETUP.......................................................26
INSERTION OF CI MODULE............................29
DIGITAL AUDIO OUT SETUP...........................30
USB SETUP.......................................................31
HEADPHONE SETUP.......................................32
OTHER A/V SOURCE SETUP..........................33
PC SETUP.........................................................34
BACK COVER FOR WIRE ARRANGEMENT...37
SUPPORTED DISPALY RESOLUTION............38
WATCHING TV / PROGRAMME
CONTROL
REMOTE CONTROL KEY FUNCTIONS...........40
TURNING ON THE TV......................................42
PROGRAMME SELECTION..............................42
VOLUME ADJUSTMENT...................................42
QUICK MENU....................................................43
ON SCREEN MENUS SELECTION AND
ADJUSTMENT...................................................44
AUTO PROGRAMME TUNING.........................45
CABLE DTV SETTING
(IN CABLE MODE ONLY).........................50
MANUAL PROGRAMME TUNING
(IN DIGITAL MODE)..................................51
2
MANUAL PROGRAMME TUNING
(IN ANALOGUE MODE)............................53
PROGRAMME EDIT..........................................55
IN DTV/RADIO MODE.......................................56
IN TV MODE......................................................56
SOFTWARE UPDATE.......................................58
DIAGNOSTICS..................................................60
CI [COMMON INTERFACE] INFORMATION....61
SELECTING THE PROGRAMME LIST.............62
FAVOURITE PROGRAMME SETUP.................63
INPUT LIST........................................................64
EPG (ELECTRONIC PROGRAMME
GUIDE)(IN DIGITAL MODE)
Switch on/off EPG..............................................65
Select a programme...........................................65
Button Function in NOW/NEXT Guide Mode....66
Button Function in 8 Day Guide Mode..............66
Button Function in Date Change Mode.............67
Button Function in Extended Description Box...67
Button Function in Record/Remind Setting Mode.........68
Button Function in Schedule List Mode.............68
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL........69
PICTURE WIZARD............................................71
ꕊ ENERGY SAVING........................................72
PRESET PICTURE SETTINGS.........................73
MANUAL PICTURE ADJUSTMENT..................74
PICTURE IMPROVEMENT TECHNOLOGY.....75
EXPERT PICTURE CONTROL.........................76
PICTURE RESET..............................................79
SCREEN SETUP FOR PC MODE....................80
SOUND CONTROL
AUTO VOLUME LEVELER................................85
CLEAR VOICE II................................................86
BALANCE...........................................................87
PRESET SOUND SETTINGS-SOUND MODE......88
PRESET SOUND SETTINGS-USER MODE....89
Surround X.........................................................89
TIME SETTING
CLOCK SETUP..................................................96
AUTO ON/OFF TIME SETTING........................97
SLEEP TIMER SETTING...................................98
AUTOMATIC STNADBY SETTING...................98
TO USE A USB DEVICE
WHEN CONNECTING A USB DEVICE..........113
PHOTO LIST....................................................115
MUSIC LIST.....................................................121
MOVIE LIST.....................................................125
DIVX REGISTRATION CODE.........................132
DEACTIVATION...............................................133
CONTENTS
AUDIO RESET...................................................90
DIGITAL AUDIO OUT.........................................91
TV SPEAKERS ON / OFF SETUP....................92
DTV AUDIO SETTING
(IN DIGITAL MODE ONLY).......................93
I/II
Stereo/Dual Reception
(In Analogue Mode Only)...................94
NICAM Reception
(In Analogue Mode Only)...................95
Speaker Sound Output Selection..............95
TELETEXT
SWITCH ON/OFF............................................134
SIMPLE TEXT..................................................134
TOP TEXT........................................................134
FASTEXT.........................................................135
SPECIAL TELETEXT FUNCTION ..................135
DIGITAL TELETEXT
OPTION SETTING
ON-SCREEN MENU LANGUAGE / COUNTRY
SELECTION.......................................................99
LANGUAGE SELECTION
(IN DIGITAL MODE ONLY).....................100
AUDIO DESCRIPTION
(IN DIGITAL MODE ONLY).....................101
DATA SERVICE................................................102
INPUT LABEL..................................................103
POWER INDICATOR.......................................104
DEMO MODE...................................................105
MODE SETTING..............................................106
INITIALIZING(RESET TO ORIGINAL FACTORY
SETTINGS)..........................................................107
TELETEXT WITHIN DIGITAL SERVICE.........136
TELETEXT IN DIGITAL SERVICE...................136
APPENDIX
TROUBLESHOOTING.....................................137
MAINTENANCE...............................................141
PRODUCT SPECIFICATIONS........................142
IR CODES........................................................146
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup........................................147
Type of Connector; D-Sub 9-Pin Male.....147
RS-232C Configurations..........................147
Set ID........................................................148
Communication Parameters.....................149
PARENTAL CONTROL / RATINGS
SET PASSWORD & LOCK SYSTEM..............108
BLOCK PROGRAMME....................................109
PARENTAL CONTROL
(IN DIGITAL MODE ONLY).....................110
INPUT BLOCK................................................. 111
KEY LOCK.......................................................112
3
PREPARATION
FRONT PANEL CONTROLS
■■ This is a simplified representation of the front panel. The image shown may be somewhat different
from your set.
PREPARATION
M2080D / M2280D
M2380D / M2780D
M2080DF / M2280DF
M2380DF / M2780DF
1
1
9
2
3
4
1
IR receiver (Remote controller receiver)
2
INPUT Button
3
MENU Button
4
OK Button
5
VOLUME Button
6
PROGRAMME Button
7
Power Button
8 Power Indicator
5
6
Illuminates blue when the set is switched on.
Note: You can adjust Power indicator in the OPTION menu.
9
4
WOOFER
7
8
FRONT PANEL CONTROLS
■■ This is a simplified representation of the front panel. The image shown may be somewhat different
from your set.
M2080DN / M2280DN
M2380DN / M2780DN
1
PREPARATION
M2080DB / M2280DB
M2380DB
1
2
3
4
5
6
1
IR receiver (Remote controller receiver)
2
INPUT Button
3
MENU Button
4
OK Button
5
VOLUME Button
6
PROGRAMME Button
7
Power Button
8
Power Indicator
Illuminates blue when the set is switched on.
Note: You can adjust Power indicator in the OPTION menu.
7
8
5
PREPARATION
BACK PANEL INFORMATION
■■ This is a simplified representation of the back panel. The image shown may be somewhat different
from your set.
PREPARATION
M2080D / M2280D
M2380D / M2780D
M2080DF / M2280DF
M2380DF / M2780DF
13
1
2
7
3
8
9
13
4
10
5
6
11
12
13
M2080DB / M2280DB
M2380DB
6
13
M2080DN / M2280DN
M2380DN / M2780DN
BACK PANEL INFORMATION
DC ADAPTER PORT
Connect to the power cord socket.
2
HDMI / DVI INPUT
Connect a HDMI signal to HDMI IN.
Or DVI (VIDEO) signal to HDMI IN with DVI to HDMI cable.
3
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of equipment. Connect to a Digital Audio Component.
Use an Optical audio cable.
4
RGB/DVI AUDIO INPUT
Connect the audio from a PC.
5
HEADPHONE SOCKET
Plug the headphone into the headphone socket.
6
Euro Scart Socket (AV1)
Connect scart socket input or output from an external device to these jacks.
7
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
8
RGB INPUT (PC)
Connect the output from a PC.
9
USB Input
PREPARATION
1
10 COMPONENT INPUT
Connect a component video/audio device to these jacks.
11 AV2 (AUDIO/VIDEO) INPUT
Connect audio/video output from an external device to these jacks.
12 ANTENNA / CABLE INPUT
Connect over-the-air signals to this jack.
13 PCMCIA (PERSONAL COMPUTER MEMORY CARD INTERNATIONAL ASSOCIATION) CARD SLOT
Insert the CI Module to PCMCIA CARD SLOT.
(This feature is not available in all countries.)
7
PREPARATION
STAND INSTALLATION
M2080D/M2280D/M2380D/M2780D
■■ The image shown may be somewhat different from your set.
Carefully place the product screen side down on a
cushioned surface that will protect product and
screen from damage.
2
Insert the Stand Base into the product.
PREPARATION
1
Stand Base
3
Use a Coin on the bottom of the stand base
and turn the screw clockwise to tighten.
Coin
8
STAND INSTALLATION
M2080DF/M2280DF/M2380DF/M2780DF
■■ The image shown may be somewhat different from your set.
Carefully place the product screen side down on a
cushioned surface that will protect product and
screen from damage.
2
Insert the Stand Base into the product.
PREPARATION
1
Stand Base
3
Use a Coin on the bottom of the stand base
and turn the screw clockwise to tighten.
Coin
9
PREPARATION
M2080DB/M2280DB/M2380DB
STAND INSTALLATION
■■ The image shown may be somewhat different from your set.
Carefully place the product screen side down on a
cushioned surface that will protect product and
screen from damage.
2
Insert the Stand Base into the product.
PREPARATION
1
Stand Base
3
Use a Coin on the bottom of the stand base
and turn the screw clockwise to tighten.
Coin
10
DETACHING STAND
M2080D/M2280D/M2380D/M2780D
■■ The image shown may be somewhat different from your set.
Place the set screen side down on a cushion
or soft cloth.
2
Detach the monitor to the Stand Base by turning the screw to the left.
Turn the screw by using a Coin.
PREPARATION
1
Coin
Stand Base
3
Pull the stand base.
11
PREPARATION
DETACHING STAND
M2080DF/M2280DF/M2380DF/M2780DF
■■ The image shown may be somewhat different from your set.
PREPARATION
1
Place the set screen side down on a cushion
or soft cloth.
2
Detach the monitor to the Stand Base by turning the screw to the left.
Turn the screw by using a Coin.
Coin
Stand Base
3
12
Pull the stand base.
DETACHING STAND
M2080DB/M2280DB/M2380DB
■■ The image shown may be somewhat different from your set.
Place the set screen side down on a cushion
or soft cloth.
2
Detach the monitor to the Stand Base by turning the screw to the left.
Turn the screw by using a Coin.
PREPARATION
1
Coin
Stand Base
3
Pull the stand base.
13
PREPARATION
DETACHING STAND BODY
■ The image shown may be somewhat different from your set.
■ Remove the Stand Body in the same way as the following when using it as a Wall Hook.
PREPARATION
1. Remove the screw 2 point.
2. Pull the stand body.
M2080D / M2280D
M2380D / M2780D
M2080DB / M2280DB
M2380DB
3. Assemble the screw 2 point
Screw
14
WALL MOUNT : HORIZONTAL INSTALLATION
For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation
instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
10 cm
10 cm
PREPARATION
10 cm
10 cm
10 cm
If you intend to mount the set to a wall, attach Wall mounting interface (optional parts) to the back of the set.
When you install the set using the wall mounting interface (optional parts), attach it carefully so it will not drop.
1. Be sure to use screws and a wall mount that meet VESA standards.
2. Using screws longer than those recommended might damage the product.
3. Using screws that do not meet VESA standards might either damage the product or result in it coming
away from the wall. We will not be held responsible for any damage resulting from failure to follow these
instructions.
4. VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications
5. Please use VESA standard as below.
5-1) 784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm
5-2) 787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad and screws.
< Screw Mounting Interface Dimensions >
Model
M2080D
M2280D
M2380D
M2080DF
M2380DF
M2380DF
VESA ( A x B)
75 x 75
Wall mount
RW120
bracket(optional)
M2080DB
M2280DB
M2380DB
M2080DN
M2380DN
M2380DN
Wall Mount Pad
M2780D
M2780DF
M2780DN
200 x 100
RW240
15
PREPARATION
DESKTOP PEDESTAL INSTALLATION
■■ The image shown may be somewhat different from your set.
For proper ventilation, allow a clearance of 10 cm on each side and from the wall.
PREPARATION
M2080D / M2280D
M2380D / M2780D
10 cm
10 cm
10 cm
10 cm
M2080DF / M2280DF
M2380DF / M2780DF
10 cm
10 cm
10 cm
10 cm
M2080DB / M2280DB
M2380DB
10 cm
10 cm
10 cm
16
10 cm
POSITIONING YOUR DISPLAY
■ The image shown may be somewhat different from your set.
* Tilt range
-5°
10°
Adjust the position of the panel in various ways for maximum
comfort.
PREPARATION
SWIVEL STAND(Only M2780D / M2780DF)
■ The image shown may be somewhat different from your set.
After installing the set, you can adjust the set manually to the
left or right direction by 179 degrees to suit your viewing position.
LOCATION
Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to
expose the set to any unnecessary vibration, moisture, dust or heat. Also, ensure that the set is placed in a
position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
WARNING
■ When adjusting the angle of the screen,
do not put your finger(s) in between the
head of the monitor and the stand body
or woofer.
You can hurt your finger(s).
M2080DF / M2280DF / M2380DF / M2780DF
17
PREPARATION
KENSINGTON SECURITY SYSTEM
PREPARATION
- The product is equipped with a Kensington Security System connector on the back panel. Connect the
Kensington Security System cable as shown below.
- For detailed installation and use of the Kensington Security System, refer to the user’s guide provided
with the Kensington Security System.
For further information, contact http://www.kensington.com, the internet homepage of the Kensington
company. Kensington sells security systems for expensive electronic equipment such as notebook
PCs and LCD projectors.
NOTE
- The Kensington Security System is an optional accessory.
NOTES
a. If the product feels cold to the touch, there may be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with product.
b. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the monitor’s performance.
c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
18
M2080D / M2280D
M2380D / M2780D
M2080DF / M2280DF
M2380DF / M2780DF
M2080DB / M2280DB
M2380DB
M2080DN / M2280DN
M2380DN / M2780DN
EXTERNAL EQUIPMENT SETUP
■■ To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
■■ For optimum picture quality, adjust antenna direction.
■■ An antenna cable and converter are not supplied.
Multi-family Dwellings / Apartments
(Connect to wall antenna socket)
RF Coaxial Wire (75 Ω)
Outdoor
Antenna
Antenna
EXTERNAL EQUIPMENT SETUP
Wall
Antenna
Socket
Single-family Dwellings / Houses
(Connect to wall jack for outdoor antenna)
UHF
Signal
Amplifier
VHF
■■ In poor signal areas, to get better picture quality, install a signal amplifier to the antenna as shown above.
■■ If signal needs to be split for two sets, use an antenna signal splitter for connection.
19
EXTERNAL EQUIPMENT SETUP
■■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
■■ The image shown may be somewhat different from your set.
HD RECEIVER SETUP
Connecting with a component cable
EXTERNAL EQUIPMENT SETUP
1
Connect the video outputs (Y, PB, PR) of the digital
set-top box to the COMPONENT IN VIDEO jacks on
the SET.
2
Connect the audio output of the digital set-top box
to the COMPONENT IN AUDIO jacks on the SET.
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top
box.)
4
Select COMPONENT input source using the INPUT
button on the remote control
1
►►HDMI Audio Supported format : Dolby Digital, PCM
DTS Audio format is not supported.
20
Signal
Component
HDMI
480i / 576i
YES
No
480p / 576p
YES
YES
720p / 1080i
YES
YES
1080p
YES
(50 Hz / 60Hz only)
YES
(24 Hz / 30 Hz / 50Hz / 60Hz)
2
Connecting a set-top box with a HDMI cable
Connect the digital set-top box to HDMI/DVI IN 1 or
HDMI/DVI IN 2 jack on the SET
2
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
3
Select HDMI 1 or HDMI 2 input source using the
INPUT button on the remote control.
1
EXTERNAL EQUIPMENT SETUP
1
! NOTE
►Check
►
that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are not High Speed
HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
21
EXTERNAL EQUIPMENT SETUP
Connecting with an HDMI to DVI cable
EXTERNAL EQUIPMENT SETUP
1
Connect the digital set-top box to HDMI/DVI IN 1 or HDMI/DVI IN 2 jack on the SET.
2
Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the SET.
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
4
Select HDMI 1 or HDMI 2 input source using the INPUT button on the remote control.
1
22
2
DVD SETUP
Connecting with a component cable
Connect the video outputs (Y, PB, PR) of the DVD
to the COMPONENT IN VIDEO jacks on the SET.
2
Connect the audio outputs of the DVD to the
COMPONENT IN AUDIO jacks on the SET.
3
Turn on the DVD player, insert a DVD.
4
Select Component input source using the INPUT
button on the remote control.
5
Refer to the DVD player's manual for operating
instructions.
1
2
EXTERNAL EQUIPMENT SETUP
1
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the SET
Video output ports
on DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
23
EXTERNAL EQUIPMENT SETUP
Connecting with a Euro Scart cable
EXTERNAL EQUIPMENT SETUP
2
Connect the Euro scart socket of the DVD to the AV1
Euro scart socket on the SET.
OPTICAL
AUDIO
DIGITAL
IN
AUDIO OUT (RGB/DVI)
1
USB IN
Turn on the DVD player, insert a DVD.
YP
3
AV IN2
1
VIDEO
B
VIDEO
PR
H/P
(MONO) L - AUDIO - R
ANTENNA /
CABLE IN
LR
AUDIO
Select AV1 input source using the INPUT button on
the remote control.
1
4
Refer to the DVD player's manual for operating
instructions.
AUDIO/
VIDEO
Scart
AV1
Input
Output
Video
Audio
RGB
Video, Audio
O
O
O
Analogue TV, Digital TV
Output Type
AV1
AV1
(TV Out)
(When DTV scheduled recoring is in
progress using recording equipment)
Digital TV
Digital TV
O
Analogue TV, AV
Analogue TV
Component / RGB
Analogue TV
HDMI
X
Current input mode
(R) AUDIO (L )
►►TV Out : Outputs Analogue
TV or Digital TV signals.
O
(The input mode is converted
to DTV)
! NOTE
►Signal
►
type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart and the
AV 1 can be received. These signals are transmitted, for example, by a paid TV decoder, game
machine or photo CD unit, etc.
►Please
►
use shielded scart cable.
24
Connecting the HDMI cable
Connect the HDMI output of the DVD to the HDMI/DVI
IN 1 or HDMI/DVI IN 2 jack on the SET
2
Select HDMI 1 or HDMI 2 input source
using the INPUT button on the remote control.
3
Refer to the DVD player's manual for operating
instructions.
1
EXTERNAL EQUIPMENT SETUP
1
! NOTE
►Check
►
that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are not High Speed
HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
25
EXTERNAL EQUIPMENT SETUP
VCR SETUP
■■ To avoid picture noise (interference), allow adequate distance between the VCR and SET.
Connecting with a RF cable
EXTERNAL EQUIPMENT SETUP
26
1
2
Wall Jack
Antenna
1
Connect the ANT OUT socket of the VCR to the ANTENNA / CABLE IN socket on the SET.
2
Connect the antenna cable to the ANT IN socket of the VCR.
3
Press the PLAY button on the VCR and match the appropriate channel between the SET and VCR
for viewing.
Connecting with a Euro Scart cable
1
Connect the Euro scart socket of the VCR to the AV1
Euro scart socket on the SET.
OPTICAL
AUDIO
DIGITAL
IN
AUDIO OUT (RGB/DVI)
1
Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner’s manual.)
3
Select AV1 input source using the INPUT button on
the remote control.
4
Refer to the VCR player's manual for operating
instructions.
YP
VIDEO
B
VIDEO
PR
(MONO) L - AUDIO - R
ANTENNA /
CABLE IN
LR
AUDIO
1
AUDIO/
VIDEO
Scart
AV1
Input
Output
Video
Audio
RGB
Video, Audio
O
O
O
Analogue TV, Digital TV
Output Type
AV1
AV1
(TV Out)
(When DTV scheduled recoring is in
progress using recording equipment)
Digital TV
Digital TV
O
Analogue TV, AV
Analogue TV
Component / RGB
Analogue TV
HDMI
X
Current input mode
(R) AUDIO (L )
EXTERNAL EQUIPMENT SETUP
2
AV IN2
USB IN
H/P
►►TV Out : Outputs Analogue TV
or Digital TV signals.
O
(The input mode is converted
to DTV)
! NOTE
►Signal
►
type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart and the
AV 1 can be received. These signals are transmitted, for example, by a paid TV decoder, game
machine or photo CD unit, etc.
►Please
►
use shielded scart cable.
27
EXTERNAL EQUIPMENT SETUP
Connecting with a RCA cable
Left = white, and Audio Right = red)
EXTERNAL EQUIPMENT SETUP
2
3
Insert a video tape into the VCR and press PLAY on
USB IN
YP
AV IN2
1
OPTICAL
AUDIO
DIGITAL
IN
AUDIO OUT (RGB/DVI)
Connect the AUDIO/VIDEO jacks between SET and 1
VCR. Match the jack colours (Video = yellow, Audio
VIDEO
B
the VCR. (Refer to the VCR owner’s manual.)
VIDEO
PR
(MONO) L -
H/P
AUDIO - R
AUDIO
LR
COMPONENT IN
Select AV2 input source using the INPUT button on
1
the remote control.
S-VIDEO
VIDEO
OUTPUT
SWITCH
L
R
ANT IN
ANT OUT
! NOTE
►If
► you have a mono VCR, connect the audio cable from the VCR to the AUDIO L / MONO jack of
the SET.
28
INSERTION OF CI MODULE
--To view the encrypted (pay) services in digital TV mode.
--This feature is not avai lable in al l countries.
1
Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association)
CARD SLOT of SET as shown.
EXTERNAL EQUIPMENT SETUP
For further information, see p.61
! NOTE
►Check
►
if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is
not inserted properly, this can cause damage to the TV and the PCMCIA card slot.
29
EXTERNAL EQUIPMENT SETUP
DIGITAL AUDIO OUT SETUP
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT
terminal on the back of TV to a Home Theater (or amp).
EXTERNAL EQUIPMENT SETUP
1
Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.
2
Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment.
3
Set the “TV Speaker option - Off ” in the AUDIO menu. (► P. 92)
Refer to the external audio equipment instruction manual for operation.
1
2
CAUTION
►Do
► not look into the optical output port. Looking at the laser beam may damage your vision.
30
USB SETUP
1
Connect the USB device to the USB IN jacks on the side of SET.
2
After connecting the USB IN jacks, you use the USB function. (► p.113)
EXTERNAL EQUIPMENT SETUP
Memory Stick
USB Cable
31
EXTERNAL EQUIPMENT SETUP
HEADPHONE SETUP
You can listen the sound through the headphone.
EXTERNAL EQUIPMENT SETUP
1
Plug the headphone into the headphone socket.
2
To adjust the headphone volume, press the
+ or - button. If you press the MUTE button, the
sound from the headphone is switched off.
! NOTE
►► AUDIO menu items are disabled when connecting a headphone.
►► Optical Digital Audio Out is not available when connecting a headphone.
32
OTHER A/V SOURCE SETUP
1
Connect the AUDIO / VIDEO jacks between SET and external equipment. Match the jack colours.
2
Select AV2 input source with using the INPUT button on the remote control.
3
Operate the corresponding external equipment.
(Video = yellow, Audio Left = white, and Audio Right = red)
Camcorder
OPTICAL
AUDIO
DIGITAL
IN
AUDIO OUT (RGB/DVI)
YP
AV IN2
USB IN
VIDEO
B
VIDEO
PR
Video Game Set
H/P
(MONO) L - AUDIO - R
ANTENNA /
CABLE IN
LR
AUDIO
VIDEO
COMPONENT IN
L
EXTERNAL EQUIPMENT SETUP
Refer to external equipment operating guide.
R
1
33
EXTERNAL EQUIPMENT SETUP
PC SETUP
When using the remote control, aim it at the remote control sensor on the SET.
When connecting with a D-sub 15 pin cable
EXTERNAL EQUIPMENT SETUP
1
Connect the signal cable from the monitor output socket
of the PERSONAL COMPUTER to the PC input socket
of the SET.
2
Connect the audio cable from the PC to the AUDIO IN
(RGB/DVI) sockets of the SET.
3
Press the INPUT button to select RGB.
4
Switch on the PC, and the PC screen appears on the set.
The set can be operated as a PC monitor.
2
1
! NOTE
►Connect
►
the signal input cable and tighten it up by turning in
the direction of the arrow as shown in the figure.
34
Connecting with an HDMI to DVI cable
1
Connect the DVI output of the PC to the HDMI/DVI IN1
2
Connect the PC audio output to the AUDIO IN (RGB/
3
Turn on the PC and the SET.
4
Select HDMI 1 or HDMI 2 input source using the INPUT
or HDMI/DVI IN2 jack on the SET.
1
2
button on the remote control.
EXTERNAL EQUIPMENT SETUP
DVI) jack on the SET.
! NOTE
►If
► you want to use HDMI-PC mode, you must set the input label to PC mode.
►Connect
►
the signal input cable and tighten it up by turning in
the direction of the arrow as shown in the figure.
35
EXTERNAL EQUIPMENT SETUP
Connecting with an HDMI to HDMI cable
EXTERNAL EQUIPMENT SETUP
1
Connect the HDMI output of the PC to the HDMI/DVI IN1
2
Turn on the PC and the SET.
3
Select HDMI 1 or HDMI 2 input source using the INPUT
or HDMI/DVI IN2 jack on the SET.
button on the remote control.
1
! NOTE
►►Check that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are not High Speed HDMI
Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
►If
► you want to use HDMI-PC mode, you must set the input label to PC mode.
36
BACK COVER FOR WIRE ARRANGEMENT
Tie cables together with a cable management as shown in the illustration.
M2080D / M2280D
M2380D / M2780D
M2080DF / M2280DF
M2380DF / M2780DF
EXTERNAL EQUIPMENT SETUP
M2080DB / M2280DB
M2380DB
M2080DN / M2280DN
M2380DN / M2780DN
37
EXTERNAL EQUIPMENT SETUP
SUPPORTED DISPALY RESOLUTION
RGB[PC] mode
M2080D / M2080DF / M2080DB / M2080DN
Resolution
EXTERNAL EQUIPMENT SETUP
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1280 x 1024
1600 x 900
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
31.469
37.5
37.879
46.875
49.725
48.363
60.023
63.981
60
59.94
75
60.317
75
64.55
60
75.029
60.02
60
HDMI/DVI - PC mode
M2080D / M2080DF / M2080DB / M2080DN
Resolution
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1280 x 1024
1600 x 900
38
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
31.469
37.5
37.879
46.875
49.725
48.363
60.023
68.681
63.981
60
59.94
75
60.317
75
64.55
60
75.029
75.062
60.02
60
M2280D / M2380D / M2780D / M2280DF /
M2380DF / M2780DF / M2280DB / M2380DB /
M2280DN / M2380DN / M2780DN
Resolution
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1680 x 1050
1600 x 1200
1920 x 1080
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
31.468
31.469
37.5
37.879
46.875
48.363
60.023
67.500
63.981
79.976
64.674
65.290
75.0
67.5
70.08
59.94
75
60.317
75.0
60.0
75.029
75.000
60.02
75.025
59.883
59.954
60.0
60
M2280D / M2380D / M2780D / M2280DF /
M2380DF / M2780DF / M2280DB / M2380DB /
M2280DN / M2380DN / M2780DN
Resolution
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1680 x 1050
1600 x 1200
1920 x 1080
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
31.468
31.469
37.5
37.879
46.875
48.363
60.023
67.500
63.981
79.976
64.674
65.290
75.0
67.5
70.08
59.94
75
60.317
75.0
60.0
75.029
75.000
60.02
75.025
59.883
59.954
60.0
60
HDMI/DVI - DTV mode
Resolution
720 x 576
1280 x 720
1280 x 720
1920 x 1080
1920
1920
1920
1920
x
x
x
x
1080
1080
1080
1080
1920 x 1080
! NOTE
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
31.469
31.5
31.25
37.500
44.96
45
33.72
33.75
28.125
27
33.75
56.250
67.43
67.5
59.94
60
50
50
59.94
60
59.94
60
50.00
24
30.00
50
59.94
60
►Avoid
►
keeping a fixed image on the set’s screen
for prolonged periods of time. The fixed image
may become permanently imprinted on the
screen use a screen saver when possible.
►►There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution
or change the refresh rate to another rate or adjust
the brightness and contrast on the menu until the
picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC
graphic card or consult the manufacturer of the PC
graphic card.
►►The synchronization input waveform for Horizontal
and Vertical frequencies are separate.
►►Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the SET or
the signal cable from the HDMI output port of the
PC to the HDMI/DVI IN port on the SET.
Resolution
720 x 480
720 x 480
720 x 576
720 x 480
720 x 480
720 x 576
1280 x 720
1280 x 720
1280 x 720
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
15.73
15.75
15.625
31.47
31.50
31.25
44.96
45.00
37.50
33.72
33.75
28.125
56.25
67.432
67.5
59.94
60.00
50.00
59.94
60.00
50.00
59.94
60.00
50.00
59.94
60.00
50.00
50
59.94
60.00
EXTERNAL EQUIPMENT SETUP
720 x 480
Component mode
►►Connect the audio cable from the PC to the Audio
input on the SET. (Audio cables are not included
with the SET).
►►If using a sound card, adjust PC sound as
required.
►►If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect
only one of either RGB or HDMI/DVI IN to display
the PC output on the SET.
►►If the graphic card on the PC does output analogue and digital RGB simultaneously, set the SET
to either RGB or HDMI. (The other mode is set to
Plug and Play automatically by the SET.)
►►DOS mode may not work depending on the video
card if you use an HDMI to DVI cable.
►►If you use too long an RGB-PC cable that is too
long, there may be interference on the screen. We
recommend using under 5m of cable. This provides the best picture quality.
39
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the set.
ꔰ (POWER)
Switches the set on from standby or off to standby.
ENERGY A
djust the Energy Saving mode of the SET.
SAVING
(► P. 72)
TV/PC Selects TV or PC mode.
WATCHING TV / PROGRAMME CONTROL
INPUT External input mode rotates in regular sequence.
TV/RAD Selects Radio, TV and DTV channel.
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table. (► P. 62)
Q.VIEW Returns to the previously viewed programme.
MENU Selects a menu.
Clears all on-screen displays and returns to TV
viewing from any menu. (► P. 44)
GUIDE Shows programme schedule. (► P. 65 to 68)
Q. MENU Select the desired quick menu source. (Aspect
Ratio, Clear Voice II , Picture Mode, Sound Mode,
Audio, Sleep Timer, Favourite, USB Device). (►P.43)
THUMBSTICK Allows you to navigate the on-screen menus and
(Up/Down/Left/Right)
adjust the system settings to your preference.
OK Accepts your selection or displays the current mode.
BACK Allows the user to move return one step in an interactive application, EPG or other user interaction
function.
꘍ Shows the present screen information.
EXIT Clears all on-screen displays and returns to TV
viewing from any menu
Coloured These buttons are used for teletext (on TELETEXT
buttons models only) , Programme edit.
40
VOLUME Adjusts the volume.
UP/DOWN
FAV Displays the selected favourite programme.
(► P. 63)
MARK Check and un-check programmes in the USB menu.
RATIO Selects your desired Aspect Ratio of picture.
Programme Selects a programme.
UP/DOWN
PAGE Move from one full set of screen information to the
UP/DOWN next one.
1 TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.
(► P. 134 to 135)
SUBTITLE Recalls your preferred subtitle in digital mode.
USB Menu USB menu(Photo List and Music List or Movie List ).
control
buttons
Auto Config. Automatically adjusts picture position and minimizes image instability.
WATCHING TV / PROGRAMME CONTROL
MUTE Switches the sound on or off.
Installing Batteries
1
■■ Open the battery compartment cover on the back side and
install the batteries matching correct polarity (+with +, -with -)
■■ Install two 1.5 V AAA batteries. Don’t mix old or used batteries
with new ones.
■■ Close cover.
■■ To remove the batteries, perform the installation actions in
reverse.
41
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
--When your TV is turned on, you will be able to use its features.
1
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
2
In standby mode to turn TV on, press the
/ I, INPUT or Pꕌꕍ button on the TV or press the
POWER, INPUT, Pꕌꕍor NUMBER button on the remote control and the TV will switch on.
WATCHING TV / PROGRAMME CONTROL
Initializing setup
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
Language, Mode Setting, Country or Set Password (When France is selected for Country), Auto
Tuning.
Note:
a. If you close without completing the initial setting, the Initial Setting menu can be displayed again.
b. Press the BACK button to change the current OSD to the previous OSD.
c. For those countries without confirmed DTV broadcasting standards, some DTV features might not work,
depending on the DTV broadcasting environment.
d. "Home Use” mode is the optimal setting for home environments, and is the TV's default mode.
e. "Store Demo" mode is the optimal setting for store environments. If a user modifies image quality data, “Store
Demo” mode initializes the product to the image quality set by us after a certain period of time.
f. The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the OPTION menu.
g. When France is selected for Country, password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, ‘3’, ‘4’.
PROGRAMME SELECTION
1
Press the P ꕌꕍ or NUMBER buttons to select a programme number.
VOLUME ADJUSTMENT
1
Press the
2
If you wish to switch the sound off, press the MUTE button.
+ or - button to adjust the volume.
You can cancel this function by pressing the MUTE,
42
+ , - button.
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
ꔣ Aspect Ratio: Selects your desired picture format.For Zoom Setting, select 14:9, Zoom and
Cinema Zoom in Ratio Menu. After completing
Zoom Setting, the display goes back to Q.Menu.
ꔩ Backlight: Adjusts the brightness of the screen
by controlling the LCD backlight.
◄
ꔴ Audio: Selects the sound output.
ꔤ Sleep Timer: Sets the sleep timer.
ꔲ Favourite: Selects the favourite programme.
ꔢ USB Device: Selects “Eject” in order to eject
USB device.
Aspect Ratio
►
16:9
1
2
WATCHING TV / PROGRAMME CONTROL
ꕇ Picture Mode: Selects your desired Picture
Mode.
ꕈ Sound Mode: It is a feature to automatically set
the sound combination which it deems the best
for the images being watched. Selects your
desired Sound Mode.
Display each menu.
Select your desired Source.
3
• Press the BACK button to move to the previous menu screen.
43
WATCHING TV / PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your set's OSD (On Screen Display) may differ slightly from what is shown in this manual.
SETUP
Move
OK
PICTURE
Move
Auto Tuning
Aspect Ratio Manual Tuning
Programme Edit
AUDIO
OK
Move
OK
Auto Volume : Off
Picture Wizard
Clear Voice II : Off ꕅ 3
ꕊ Energy Saving : Off
Balance Picture Mode : Vivid
Sound Mode : Music
Diagnostics
• Backlight 100
• Surround X CI Information
• Contrast 100
• Treble 50
• Brightness 50
• Bass 50
• Sharpness 70
• Reset
Software Update : ON
: 16:9
▼
WATCHING TV / PROGRAMME CONTROL
OPTION
Move
0
▼
IME
OK
Move
Menu Language
: English
Clock
Audio Language
: English
Off Time : Off
Subtitle Language : English
On Time : Off
Sleep Timer : Off
SETUP
Disabled Assistance
PICTURE
AUDIO
TIME
OK
Automatic Standby : 4 hours
: ­- -
Country : Off
Input Label
Set ID
:1
Power Indicator
: On
OPTION
LOCK
INPUT
USB
▼
LOCK
Move
INPUT
OK
Set Password
Move
OK
USB
Antenna
Photo List
Lock System : Off
AV1
Music List
• Block Programme
AV2
Movie List
• Parental Guidance
Component
DivX Reg. Code
• Input Block
RGB
Deactivation
Key Lock
: Off
HDMI1
Move
OK
HDMI2
1
MENU
Display each menu.
2
3
Select a menu item.
Move to the pop up menu.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
! NOTE
44
►It
► is not possible to use CI Information in Analogue mode.
AUTO PROGRAMME TUNING
(For countries other than Finland, Sweden, Denmark and Norway)
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
The maximum number of programmes that can be stored is 1000. But the number may differ slightly
depending on broadcasting signals.
Move
SETUP
OK
ꔉ
Auto
Auto Tuning
Tuning Manual Tuning
➩
Programme Edit
Software Update Move
Auto
AutoTuning
Tuning : ON
OK
ꔉ
Manual Tuning
Programme Edit
Software Update Diagnostics
Diagnostics
CI Information
CI Information
: ON
➩
Check your antenna connection.
The previous channel information will
be updated during Auto Tuning.
□ SECAM L Search
□ Automatic Numbering
Start
Close
1
2
MENU
Select SETUP.
Select Auto Tuning.
3
Select Antenna.
4
Run Auto tuning.
• Use NUMBER buttons to input a 4-digit
password in Lock System ‘On’.
• If you wish to keep on auto tuning select
Start using the ꕌꕍ button. Then, press
the OK button. Otherwise select Close.
• Automatic Numbering: Decide whether to use the programme numbers as
sent by broadcasting stations for tuning.
• When select Italy in the County menu, if
the pop up is displayed when the conflicted Programme after Auto Tuning,
select a broadcaster for conflicting programme number to solve.
WATCHING TV / PROGRAMME CONTROL
SETUP
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
45
WATCHING TV / PROGRAMME CONTROL
AUTO PROGRAMME TUNING
(Only for Finland, Sweden, Denmark and Norway)
DVB-C Auto Tuning is a menu for users in countries that support DVB cable.
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
If you want to select the Antenna,
WATCHING TV / PROGRAMME CONTROL
SETUP
Move
Auto
AutoTuning
Tuning SETUP
OK
ꔉ
Manual Tuning
Programme Edit
Software Update : ON
Move
Auto
AutoTuning
Tuning ➩
OK
ꔉ your TV Connection.
Please select
Manual Tuning
➩
Programme Edit
Software Update Diagnostics
Diagnostics
CI Information
CI Information
: ON
Antenna
Cable
Close
Check your antenna connection.
The previous channel information will
be updated during Auto Tuning.
□ SECAM L Search
□ Automatic Numbering
Start
Close
1
2
MENU
Select SETUP.
Select Auto Tuning.
3
Select Antenna.
4
5
• Use NUMBER buttons to input a 4-digit
password in Lock System ‘On’.
• If you wish to keep on auto tuning select
Start using the ꕌꕍbutton. Then, press
the OK button. Other wise select Close.
• Automatic Numbering: Decide whether to use the programme numbers as
sent by broadcasting stations for tuning.
Select Start.
Run Auto tuning.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
46
If you want to select the Cable,
■■ The image shown may be somewhat different from your set.
Service Operator
SETUP
Move
SETUP
OK
ꔉ
Auto
AutoTuning
Tuning Manual Tuning
SETUP
OK
Manual Tuning
➩
Programme Edit
Software Update Move
Auto
AutoTuning
Tuning Please select your ꔉ
TV Connection.
: ON
➩
Programme Edit
Software Update Diagnostics
Diagnostics
CI Information
CI Information
: ON
Antenna
Move
Auto
AutoTuning
Tuning
Comhem
OK
ꔉ
ꔉ
Manual Tuning
Other Operators
Programme Edit
Software UpdatePrevious
: ON
Next
Diagnostics
Cable
CI Information
Close
Move
Auto
AutoTuning
Tuning ➩
Manual Tuning
◄
OK
Symbol rate(kS/s)
Programme Edit
2
MENU
►
362000
6875
Software Update Modulation
: ON
640AM
Diagnostics
Network ID
0
CI Information
1
Default
ꔉ
Frequency(kHz)
6
be updated during Auto Tuning.
□ SECAM L Search
Start
Close
Close
7
Select SETUP.
Select Auto Tuning.
8
9
Select Cable.
5
The previous channel information will
OK
3
4
Check your antenna connection.
➩
Select Comhem or Other
Operators.
Select Default, Full or User
Make appropriate adjustments. (Except for Full
mode)
Select Close.
Select Start.
WATCHING TV / PROGRAMME CONTROL
SETUP
Run Auto tuning.
• Use NUMBER buttons to input a 4-digit
password in Lock System ‘On’.
• If you wish to keep on auto tuning select
Start using the ꕌꕍ button. Then, press
the OK button. Other wise select Close.
• Automatic Numbering: Decide whether to use the programme numbers as
sent by broadcasting stations for tuning.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
47
WATCHING TV / PROGRAMME CONTROL
• When you select the Cable, the Cable Service Operator selection screen can differ or not exist by the
Cable situation of the applicable country
• The popup window to select between Service Operator is only shown initially for the 3 cases when you
accessing the Initial Setting menu, when you change from Antenna to Cable or when you access the
menu after changing the Country.
• When you want to select between Service Operator aside from the above 3 cases, you can do so by
selecting SETUP → Cable DTV Setting → Service Operator.
WATCHING TV / PROGRAMME CONTROL
• Acquired certification SO: Sweden(Comhem), Denmark(YouSee, Stofa).
• If there are not any Service Operator that you want, select Other Operators.
• If you select "Other Operators", or the selected country supports "Other Operators" only, it may take some
time to search all the channels, or it may not search some of the channels.
If some of the channels do not appear, follow the steps below.
1. SETUP → Auto Tuning → Cable
2. Input additional values such as the frequency, symbol rate, modulation, and network ID
(You can ask your cable service provider for the above information
The following values are needed in order to search all available programmes quickly and correctly.
The commonly used values are provided as "default".
However, for correct settings, please inquire of the cable service provider.
When running Auto Tuning in DVB cable mode, selecting Full will search through all frequencies to find available channels.
In the case when the programme is not searched by selecting the Default, perform the searching by selecting the Full.
However, in the case when the programme is searched by selecting the Full, the Auto Tuning time can be
taken too much.
• Frequency: Enter a user-defined frequency range.
• Symbol rate: Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem
sends symbols to a channel).
• Modulation: Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier).
• Network ID: Unique identifier allocated for each user.
48
AUTO PROGRAMME TUNING
If you select the “- -” of Country Setting, (Except for Finland, Sweden,
Denmark and Norway)
To watch DVB-C in the countries excluding Finland, Sweden, Denmark and Norway select '- -' as the
Country in OPTION.
You can select User mode or Full mode in Auto Tuning.
During Full mode tuning, some channel may be restricted for some Cable Service Operator (SO), and it may
take a long time for tuning.
Note
►►Your cable provider may charge for their services, or require you to agree to its items and conditions of business.
►►DVB-C Cable may not operate correctly with some cable providers.
►►Compatibility with DVB-C digital cable broadcasts is not guaranteed.
! NOTE
►M**80D/DF/DB/DN-PYM
►
does not support DVB-C. (Check the model name on the label on the
back of the product.)
WATCHING TV / PROGRAMME CONTROL
The corresponding home frequency information may need to be changed when tuning the User mode, and
the corresponding information depends on the Cable Service Operator (SO) in service.
49
WATCHING TV / PROGRAMME CONTROL
CABLE DTV SETTING (IN CABLE MODE ONLY)
The range that a user can select from the Service Operator menu differs depending on number of Service
Operator supported by each country, and if number of supported Service Operator for each country is 1, corresponding function becomes non-activation.
After changing Service Operator, a warning window saying that channel map will be deleted when OK button
is pressed or Close is selected, and a Auto-tuning pop-up window appears when 'YES' is selected.
WATCHING TV / PROGRAMME CONTROL
SETUP
Move
SETUP
OK
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
➩
Programme Edit
Software Update : ON
Diagnostics
Move
OK
Programme Edit
Software Update : ON
Diagnostics
CI Information
Cable DTV Settiing
Sttiing
CI Information Service Operator
Cable DTV Settiing
SttiingChannel Auto Update ꔉ
ꔉ
◄ Comhem ►
On
Close
1
2
3
4
MENU
Select SETUP.
Select Cable DTV Setting.
Select Service Operator or
Channel Auto Update.
• If you select Cable, you can see Cable
DTV Setting menu.
• When Channel Auto Update in On, the
channel information will be automatically
updated whenever the network information
changes.
• When Channel Auto Update is Off, the
channel information will not be updated.
Select your desired source.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
50
MANUAL PROGRAMME TUNING (IN DIGITAL MODE)
Manual Tuning lets you manually add a programme to your programme list.
(For countries other than Finland, Sweden, Denmark and Norway &
When selecting Antenna if Finland, Sweden, Denmark, Norway or “--”
country is chosen)
SETUP
Move
SETUP
OK
Manual
ManualTuning
Tuning Auto Tuning
ꔉ
Programme Edit
Software Update : ON
➩
Manual
ManualTuning
Tuning OK
◄
ꔉ
DTV
Programme Edit
to your channel list.
Software Update UHF CH. : ON
Diagnostics
Diagnostics
CI Information
CI Information
►
Your receiver will add this channel
Bad
30
normal
Good
Update
Close
1
2
MENU
• Use NUMBER buttons to input a 4-digit
password in Lock System ‘On’.
Select SETUP.
Select Manual Tuning.
3
WATCHING TV / PROGRAMME CONTROL
Auto Tuning
Move
Select DTV.
4
Select the desired channel number.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
51
WATCHING TV / PROGRAMME CONTROL
(When selecting Cable (DVB cable mode) if Finland, Sweden, Denmark,
Norway or “--” country is chosen)
SETUP
Move
SETUP
OK
Auto Tuning
Move
Auto Tuning
Manual
ManualTuning
Tuning ꔉ
Programme Edit
Software Update : ON
➩
Manual
ManualTuning
Tuning Programme Edit
Software Update WATCHING TV / PROGRAMME CONTROL
Diagnostics
Diagnostics
CI Information
CI Information
OK
◄
DTV
ꔉ
Frequency(kHz)
Symbol rate(kS/s)
: ON
Modulation
Bad
►
36200
6875
640AM
normal
Good
Add
Close
1
MENU
2
Select SETUP.
Select Manual Tuning.
3
Select DTV.
4
• Use NUMBER buttons to input a 4-digit
password in Lock System ‘On’.
• Symbol rate: Enter a user-defined symbol rate. (symbol rate: Speed at which a
device such as modem sends symbols
to a channel.)
• Modulation: Enter a user-defiend modulation. (Modulation: Loading of audio or
video signals onto carrier)
Select the desired channel number.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
! NOTE
►M**80D/DF/DB/DN-PYM
►
does not support DVB-C. (Check the model name on the label on the
back of the product.)
Frequency, Symbol rate, and Modulation mode are needed in order to add a programme correctly in
DVB cable mode. Please inquire of the cable service provider about the correct values.
52
MANUAL PROGRAMME TUNING (IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
SETUP
Move
SETUP
OK
Auto Tuning
Move
Auto Tuning
ꔉ
Manual
ManualTuning
Tuning Programme Edit
Software Update : ON
Manual
ManualTuning
Tuning ➩
Programme Edit
Software Update Diagnostics
CI Information
CI Information
◄
Storage
TV
ꔉ
►
3
System
: ON
Band
BG
V/UHF
Channel
0
Search
◄►
Name
C 02
Store
Close
1
2
MENU
6
Select SETUP.
Select V/UHF or Cable.
Select Manual Tuning.
3
8
Select TV.
4
5
or
7
Select the desired
programme number on.
9
or
Select the desired
channel number.
Commence searching..
WATCHING TV / PROGRAMME CONTROL
Diagnostics
OK
Select Store.
Select a TV system.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
•Use NUMBER buttons to input a 4-digit password in Lock System ‘On’.
•L: SECAM L/L (France)
BG: PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia)
I: PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK: PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
•To store another channel, repeat steps 4 to 9.
53
WATCHING TV / PROGRAMME CONTROL
SETUP
Move
SETUP
OK
Auto Tuning
ꔉ
Manual
ManualTuning
Tuning ➩
Programme Edit
Software Update Move
Auto Tuning
: ON
Manual
ManualTuning
Tuning Programme Edit
Software Update Diagnostics
Diagnostics
CI Information
CI Information
OK
◄
Storage
ꔉ
TV
►
3
System
: ON
Band
BG
V/UHF
Channel
0
Search
◄►
Name
C 02
Store
Close
WATCHING TV / PROGRAMME CONTROL
■■ Assigning a station name
You can assign a station name with five characters to each programme number.
1
2
MENU
Select SETUP.
Select Manual Tuning.
3
Select TV.
4
5
6
7
Select Name.
Select the position and make your choice of the second character, and so on.
You can use an the alphabet A to Z, the number 0 to 9, +/ -, and blank.
Select Close.
Select Store.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
54
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P ꕌꕍ button
during TV viewing.
If you wish to select the skipped programme, directly enter the programme number with the NUMBER
buttons or select it in the Programme edit menu.
This function enables you to skip the stored programmes.
You can change the programme number using “Move” function, if “Automatic Numbering” is unchecked
when you start Auto Tuning.
Move
1
OK
YLE TV1
Auto Tuning
Manual Tuning
ꔉ
Programme
ProgrammeEdit
Edit Software Update : ON
➩
Diagnostics
CI Information
Pr. Change
Navigation
DTV
RADIO
TV
1 YLE TV1
2 YLE TV2
4 TV4 Stockholm
5 YLE FST
6 CNN
8 YLE24
9 YLE Teema
14 TV4 Film
24 TV4 Fakta
50 TV400
24 TV4 Fakta
84 Kanal Lokal
24 TV4 Fakta
86 Info/3sat
87 Doku/Kika
88 TVE 1
Page Change
Previous
Skip
1
2
MENU
• Use NUMBER buttons to input a 4-digit
password in Lock System "On".
Select SETUP.
WATCHING TV / PROGRAMME CONTROL
SETUP
Select Programme Edit.
3
Enter the Programme Edit.
4
Select a programme to be stored or skipped.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
55
WATCHING TV / PROGRAMME CONTROL
IN DTV/RADIO MODE
■■ Skipping a programme number
1
2
3
Select a programme number to be skipped.
BLUE Turn the programme number to blue.
BLUE Release.
WATCHING TV / PROGRAMME CONTROL
IN TV MODE
This function enables you to delete or skip the stored programmes.
You can also move some channels and use other programme numbers.
■■ Deleting a programme
1
2
3
Select a programme number to be skipped.
RED
Turn the programme number to red.
RED
Delete.
BLUE Release.
■■ Moving a programme
1
2
3
56
• When programmes are to be skipped,
the skipped programme shows in blue
and these programmes will not be
selected by the P ꕌꕍ buttons during TV
viewing.
• If you wish to select a skipped programme, directly enter the programme
number with the NUMBER buttons or
select it in the programme edit or EPG.
Select a programme number to be skipped.
GREEN
GREEN Release.
Turn the programme number to green.
• The selected programme is deleted, all
the following programmes are shifted up
one.
■■ Auto Sort
1
YELLOW Start Auto Sort.
• After activating Auto Sort once, you can
no longer edit programmes.
1
2
3
Select a programme number to be skipped.
BLUE Turn the programme number to blue.
BLUE Release.
• When a programme number is skipped it
means that you will be unable to select it
using the P ꕌꕍ button during normal TV
viewing.
• If you wish to select a skipped programme, directly enter the programme
number with the NUMBER buttons or
select it in the programme edit or EPG.
WATCHING TV / PROGRAMME CONTROL
■■ Skipping a programme number
57
WATCHING TV / PROGRAMME CONTROL
SOFTWARE UPDATE
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
SETUP
Move
SETUP
OK
Auto Tuning
Manual Tuning
Programme Edit
Software
SoftwareUpdate
Update
WATCHING TV / PROGRAMME CONTROL
58
1
OK
ꔉ
: ON
Manual Tuning
Programme Edit
Software
SoftwareUpdate
Update
Diagnostics
CI Information
CI Information
:Off
On : ON
ꔉ
On
On
Select SETUP.
2
Select Software Update.
3
4
: On
➩
Diagnostics
MENU
Move
Auto Tuning
Select On or Off.
• If you select On, a user confirm message box will be displayed to notify
that new software is found.
Save.
ꔉ
* When setting “Software Update”
Occasionally, a transmission of
updated digital software information will result in the following
menu on the TV screen.
YES
Close
Simple Update: for current
update stream
A new software update is available at 00/00/0 00:00.
Do you want to update the software when available?
YES
After the Software Update is
complete, the System restarts.
Software downloading progress.
Ver. 03.01.00 ► Ver. 03.02.00
65 %
HIDE
New Software is successfully installed.
Stop
When the power is turned off, downloading starts.
When the power is turned on while updating, the
progress status is displayed.
Close
Schedule Update: for scheduled update stream
When the Software Update menu is "Off", the
message to change it to "On" appears.
--During Progress of a Software Update, please note the following:
• Power to the TV must not be interrupted.
• The TV must not be switched off.
• The antenna must not be disconnected.
• After Software Update, you can confirm the updated software version in Diagnostics menu.
• It may take hours to download the software, so make sure that the power stays on during the download.
WATCHING TV / PROGRAMME CONTROL
Software update is available.
Would you like to download now?
(approximately 30 Min ~ 2 hours)
Your TV software is updated when you turn off the TV
using the remote control or local key.
Do not unplug!
Select the Yes using the < > button and you will see the following
picture.
59
WATCHING TV / PROGRAMME CONTROL
DIAGNOSTICS
This function enables you to view information on the Manufacturer, Model/Type, Serial Number and
Software Version.
This displays the information and signal strength of the tuned *MUX.
This displays the signal information and service name of the selected MUX.
(*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.))
SETUP
Move
Engineering Diagnostics
WATCHING TV / PROGRAMME CONTROL
Manufacturer : LG Electronics Inc.
Model / Type : M2380D
Serial No. : SKJY1107
Software Version : V01.08.00
OK
Auto Tuning
Manual Tuning
Programme Edit
Software Update : ON
Diagnostics
Diagnostics
ꔉ
➩
▼
ꔉ
CH 30
CH 34
CI Information
CH 36
CH 38
CH 54
CH 60
▼
Prev.
1
2
MENU
Popup
Exit
Select SETUP.
Select Diagnostics.
3
Display Manufacturer, Model / Type, Serial Number and Software Version.
4
Display the information of Channel.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
60
CI [COMMON INTERFACE] INFORMATION
This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you
cannot watch pay services.
When the module is inserted into the CI slot, you can access the module menu.
To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CI module
from the TV. This may cause a malfunction. When the TV is turned on after inserting a CI Module, you may not
have any sound output.
This may be incompatible with the CI module and smart card.
CI (Common Interface) functions may not be possible depending upon the country broadcasting circumstances.
SETUP
Move
Viaccess Module
OK
Auto Tuning
Consultations
Manual Tuning
Authorizations
Programme Edit
Software Update : ON
Diagnostics
CICIInformation
Information
ꔉ
➩
Module information
Select the item
• This OSD is only for illustration and the menu options and screen format will vary according to the
Digital pay services provider.
• It is possible for you to change CI (Common Interface) menu screen and service by consulting your
dealer.
1
MENU
Select SETUP.
2
Select CI Information.
3
4
WATCHING TV / PROGRAMME CONTROL
When using a CAM(Conditional Access Module), please make sure it meets fully the requirements of either
DVB CI or CI plus.
Select the desired item: Module information, smart card information, language, or software download etc.
Save.
• Press the BACK button to move to the previous menu screen.
61
WATCHING TV / PROGRAMME CONTROL
SELECTING THE PROGRAMME LIST
You can check which programmes are stored in the memory by displaying the programme list.
Programme List
Mini Glossary
Displayed when the
Locked Programme.
1 BBC
2 BBC
ꔉ
3 BBC
WATCHING TV / PROGRAMME CONTROL
Exit.
■■ Displaying programme LIST
1
LIST
Display the Programme List.
• You may find some blue programmes. These
have been set up to be skipped by auto programming or in the programme edit mode.
• Some programmes with the channel number
shown in the programme LIST indicate there is
no station name assigned.
■■ Selecting a programme in the programme list
1
Select a programme.
TV/
RAD
2
Switch to the chosen programme number.
■■ Paging through a programme list
1
Turn the pages.
2
LIST
62
Return to normal TV viewing.
The mode will be switched between
TV, DTV, and Radio from the program you are currently watching.
FAVOURITE PROGRAMME SETUP
■■ Selecting favourite programme
Favourite programme is a convenient feature that lets you quikly scan up to programmes of your choice
without having to wait for the TV to scan through all the in-between programmes.
Favourite
◄
►
1
2
3
Select your desired
programme.
or
4
Select Favourite.
Select Favourite.
Return to TV viewing.
WATCHING TV / PROGRAMME CONTROL
Favourite
• This will automatically include the selected programme into your favourite programme list.
■■ Displaying the favourite programme list
♥ Favourite List
1 BBC
2 BBC
ꔉ
3 BBC
3
MARK
FAV
Display the Favourite Programme List.
Exit.
63
WATCHING TV / PROGRAMME CONTROL
INPUT LIST
HDMI1/2, AV1/2, COMPONENT and RGB can be recognized by a detect pin and thus enabled only
when an external device approves voltage.
By using TV/RAD button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV mode.
• Antenna or Cable: Select it when watching the DTV/TV. (Digital cable input is available only at Finland,
Sweden and “--” country)
• AV1, AV2: Select it when watching the VCR or external equipment.
• Component: Select it when using the DVD or the Digital set-top box depends on connector.
WATCHING TV / PROGRAMME CONTROL
• RGB: Select it when using PC depends on connector.
• HDMI 1, HDMI 2: Select it when using DVD, PC or Digital set-top box depend on connector.
Antenna
AV1
HDMI 2
1
AV2
HDMI 1
Component
RGB
INPUT
Select the input source.
! NOTE
►►The OSD (On Screen Display) is displayed on the screen as shown below.
Is the input connected to your PC?
Yes
No
• When turning the product on in HDMI input.
• When switching to HDMI input.
• When connecting an HDMI cable with no signal.
Do not show message again.
• If you select "Yes," the size and image quality are optimised for your PC.
• If you select "No," the size and image quality are optimised for the AV device (DVD player, set-top
box, gaming device).
• If you select "Do not show message again," this message does not appear until the monitor is
reset. You can change the set value in MENU s Option sInput label.
• The values set for HDMI1/HDMI2 are saved independently.
64
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options.
The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability
and amount of these programme details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcast by broadcasting companies.
The EPG displays the programme details for next 8 days.
Shows the present screen information.
Broadcasted programme with the icon may not be
displayed in Monitor Out depending on the information of the programme.
576i/p, 720p, 1080i/p: Resolution of broadcasting programme
Switch on/off EPG
1
GUIDE
Switch on or off EPG.
Select a programme
1
2
or
Select desired programme.
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
ꔖ Displayed with a DTV Programme.
ꔕ Displayed with a Radio Programme.
꘎ Displayed with a MHEG Programme.
ꔰ Displayed with a AAC Programme.
ꔶ Aspect ratio of broadcasting programme.
ꔷ Aspect ratio of broadcasting programme.
ꔇ Displayed with a Teletext Programme.
Displayed with a Subtitle Programme.
ꔚ Displayed with a Scramble Programme.
ꔨ Displayed with a Dolby Programme.
ꔩ Displayed with a Dolby Digital PLUS
Programme.
The EPG will disappear after moving to a selected program.
65
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
Button Function in NOW/NEXT Guide Mode
You can view a program being broadcasted and one scheduled to follow.
RED Change EPG mode.
Programme Guide
1 YLE TV1
YELLOW Enter Timer Record/Remind setting mode.
NOW
1 YLE TV1
5 YLE FST Naturtimmen
6 CNN
Lyssna
8 YLE24
Glamour
Favourite
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Select NOW or NEXT Programme.
Select the Broadcast Programme.
▲
Information
GUIDE
Keno
World Business
Fantomen
Kritiskt
ABC
Tänään otsikoissa
Schedule
or
or
BACK
RADIO
Pr. Change
Mode
Schedule List
Switch off EPG.
EXIT
Select TV or RADIO Programme.
TV/
RAD
Page Up/Down.
Detail information on or off
Button Function in 8 Day Guide Mode
RED Change EPG mode.
Programme Guide
1 YLE TV1
GREEN Enter Date setting mode.
14:00
15:00
Antigues Roadshow
Mint Extra
TV2: Farmen
Kungskonsumente
The Drum
The Drum
You Call The Hits
Fashion Essentials
...
... ...
Tänään otsikoissa
1 YLE TV1
2 YLE TV2
4 TV..
YELLOW Enter Timer Record/Remind setting mode.
5 YLE FST
6 CNN
...
8 YLE24
▲
Favourite
BLUE Enter Timer Record/Remind list mode.
The EPG will disappear after moving to a
selected program.
Select the Broadcast Programme.
Page Up/Down.
Information
Mode
GUIDE
TV/
RAD
6 Apr. 2007 15:09
▲
6 Apr. (Fri.)
ALL
Select Programme.
66
NEXT
That ’70s show
2 YLE TV2 Your World Today
4 TV..
Legenen om Den....
BLUE Enter Timer Record/Remind list mode.
The EPG will disappear after moving to a
selected program.
6 Apr. 2007 15:09
▲
ALL
Pr. Change
Date
or
BACK
Schedule
or
EXIT
RADIO
Schedule List
Switch off EPG.
Select TV or RADIO Programme.
Detail information on or off
Button Function in Date Change Mode
GREEN Switch off Date setting mode.
Programme Guide
1 YLE TV1
ALL
Change to the selected date.
1 YLE TV1
2 YLE TV2
5 YLE FST
6 CNN
8 YLE24
6 Apr. (Fri.)
14:00
4 TV..
Select a date.
6 Apr. 2007 15:09
▲
◄
...
►
15:00
Kungskonsumente
Antigues Roadshow
The Drum
Mint Extra
TV2: Farmen
The Drum
You Call The Hits
Fashion Essentials
...
... ...
Tänään otsikoissa
▲
Date. Change
Date Exit
Switch off Date setting mode.
or
BACK
or
EXIT
Switch off EPG.
Button Function in Extended Description Box
Text Up/Down.
Information
YELLOW Enter Timer Record/Remind setting mode.
▲
or
BACK
The detail information on or off.
▲
Information
GUIDE
Switch off EPG.
Schedule
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
GUIDE
67
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
Button Function in Record/Remind Setting Mode
Sets a start or end time for recording, and sets only a start time for the reminder with the end time grayed out.
This function is available only when recording equipment that use pin8 recording signalling has been connected to the TV-OUT(AV1) terminal, using a SCART cable.
BACK
Change to Guide or Schedule mode.
Select the date to record.
Date
Start Time
End Time
Programme
6 Mar.
15:09
17:30
That ’70s sh
▼
Select Record or Remind.
Function setting.
▼
OK
Prev.
Select Date, Start/End time or Programme.
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Save Timer Record/Remind.
Button Function in Schedule List Mode
If you’ve created a schedule list, a scheduled program is displayed at the scheduled time even when you
are watching a different program at the time.
Only the Up/Down/OK/BACK keys will work when a popup window is open.
RED Add new Manual Recording setting mode.
Schedule List
Start Date
GREEN Add new Timer Watching setting mode.
Fri. 6 Apr. 2007 15:09
Start Time
Title
6 May 16:00 Friend1
6 May 18:00 Friend2
Friend2
16:00
Modify
Delete
Delete All
BLUE
or
GUIDE
Remind
DTV 19 Dave
(Fri.)06/05/2007
16:00
Change to Guide mode.
Move
BACK
or
EXIT
Switch off EPG.
New Record
Select your desired Option(Modify/Delete/Delete All).
Select Schedule List.
Page Up/Down.
68
Page1/1
Close
Modify/Delete
New Remind
Page Change
Exit
Programme Guide
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats: 16:9, Just Scan, Original, Full Wide, 4:3, 14:9,
Zoom and Cinema Zoom.
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on
the screen and remain visible.
You can adjust the enlarge proportion using ꕌꕍ button.
This function works in the following signal.
1
Select the desired picture format.
• 16:9
The following selection will allow you to
adjust the picture horizontally, in linear proportion, to fill the entire screen(useful for
viewing 4:3 formatted DVDs).
• You can also adjust Aspect Ratio in the PICTURE
menu.
• For Zoom Setting, select 14:9, Zoom and Cinema
Zoom in Ratio Menu. After completing Zoom
Setting, the display goes back to Q.Menu.
• Original
When your TV receives a wide screen signal
it will automatically change to the picture
format broadcast.
PICTURE CONTROL
2
Select Aspect Ratio.
Original
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there is noise in original Picture, You
can see the noise at the edge.
• Full Wide
When TV receives the wide screen signal,it
will lead you to adjust the picture horizontally
or vertically, in a linear proportion,to fill the
entire screen fully.
Just Scan
Full Wide
69
PICTURE CONTROL
• 4:3
The following selection will allow you to view
a picture with an original 4:3 aspect ratio,
gray bars will appear on both the left and
right of the screen.
• Zoom
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and bottom of the picture will be cropped.
• 14 : 9
You can view a picture format of 14:9 or a
gen eral TV programme in the 14:9 mode.
The 14:9 screen is viewed in the same way
as in 4:3, but is magnified to the left and right.
• Cinema Zoom
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
Note:When enlarging or reducing the picture,
the image may become distorted.
PICTURE CONTROL
◄ or ► button: Adjust enlarge proportion of
Cinema Zoom. The adjustment range is 1 to 16.
▼ or ▲ button: Move the screen.
! NOTE
►You
►
can only select 4:3, 16:9 (Wide), 14:9, Zoom/Cinema Zoom in Component mode.
►You
►
can only select 4:3, Original, 16:9 (Wide), 14:9, Zoom/Cinema Zoom in HDMI mode.
►You
►
can only select 4:3, 16:9 (Wide) in RGB-PC, HDMI-PC mode only.
►In
► DTV/HDMI/Component (over 720p) mode, Just Scan is available.
►In
► Analogue/AV mode, Full Wide is available.
70
PICTURE WIZARD
This feature lets you adjust the picture quality of the original image.
Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can
calibrate the screen quality by easily following each stage.
When you adjust the image to Low, Recommended or High, you can see the changed result as an
example.
In RGB-PC / HDMI-PC mode, the changed Colour, Tint and H/V Sharpness values are not applied.
PICTURE
Move
Aspect Ratio Picture Wizard
OK
With Picture Wizard, you can adjust the picture quality of the
: 16:9
original image.
ꔉ
Picture
PictureWizard
Wizard
Picture Mode : Vivid
• Backlight 100
• Contrast • Brightness 50
• Sharpness 70
100
Previous
▼
1
2
3
4
MENU
Select PICTURE.
Next
• If you stop the setting before the final stage, the
changes will not be applied
• The adjustment value is saved to Expert 1.
PICTURE CONTROL
➩
ꕊ Energy Saving : Off
Select Picture Wizard.
Adjust Black level, White level, Colour, Tint, Horizontal Sharpness, Vertical Sharpness,
Colour Temperature, Dynamic Contrast , Colour Gain, Backlight.
Select input source to apply the settings.
5
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
71
PICTURE CONTROL
ꕊ ENERGY SAVING
It reduces the TV’s power consumption.
The default factory setting is adjusted to the comfortable level to be viewed at home.
You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the
Picture Mode.
When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is finished.
Selecting ‘Screen Off’ while tuned to a radio station channel will reduce power consumption.
PICTURE
Move
Aspect Ratio PICTURE
OK
: 16:9
Aspect Ratio Picture Wizard
ꔉ
PICTURE CONTROL
➩
2
3
ꕊ
Off
ꕊ Energy
Energy Saving
Saving :: Off
Picture Mode : Vivid
Picture Mode : Vivid
• Backlight 100
• Backlight 100
• Contrast 100
• Contrast • Brightness 50
• Brightness 50
• Sharpness 70
• Sharpness 70
▼
MENU
OK
Picture Wizard
ꕊ
Off
ꕊ Energy
Energy Saving
Saving :: Off
1
Move
: 16:9
Off
Off
ꔉ
Minimum
Medium
Maximum
Screen Off
ꔉ
100
▼
Select PICTURE.
Select ꕊ Energy Saving.
Select Off, Minimum, Medium, Maximum or Screen Off.
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
• When you select Screen Off, the screen will be turned off in 3 seconds and Screen Off will start. And
the TV is disabled to be automatically turned off.
• You can also adjust this feature by selecting Energy Saving button on the remote control.
• If you want to return from Screen off, input any key.
72
PRESET PICTURE SETTINGS
Picture Mode-Preset
Vivid Standard Cinema Sport Game Strengthen the contrast, brightness, colour and sharpness for vivid picture.
The most general screen display status.
Optimizes video for watching movies.
Optimizes video for watching sports events.
Optimizes video for playing games.
PICTURE
Move
Aspect Ratio PICTURE
OK
: 16:9
Aspect Ratio Picture Wizard
Picture Wizard
ꕊ Energy Saving : Off
ꔉ
➩
ꕊ Energy Saving : Off
3
Vivid
Vivid
ꔉ
Standard
ꔉ
Cinema
:: Vivid
Vivid
Picture
Picture Mode
Mode :: Vivid
Vivid
• Backlight 100
• Contrast 100
• Backlight 100 Sport
• Contrast 100 Game
• Brightness 50
• Brightness 50 ꕋ Expert 1
• Sharpness 70
• Sharpness 70 ꕋ Expert 2
▼
Select PICTURE.
PICTURE CONTROL
2
MENU
OK
Picture
Picture Mode
Mode ▼
1
Move
: 16:9
Select Picture Mode.
Select Vivid, Standard, Cinema, Sport or Game
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
• Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture
Mode menu based on the programme category.
• You can also adjust Picture Mode in the Q. Menu.
73
PICTURE CONTROL
MANUAL PICTURE ADJUSTMENT
Picture Mode-User option
PICTURE CONTROL
Backlight
To control the brightness of the screen, adjust the brightness of LCD panel.
Adjusting the backlight when setting the brightness of the set is recommended.
Contrast
Adjusts the signal level between black and white in the picture. You may use Contrast when the bright
part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Colour
Adjusts intensity of all colours.
Tint
Adjusts the balance between red and green levels.
Colour Temperature
Set to warm to enhance hotter colours such as red, or set to cool to make picture bluish.
PICTURE
Aspect Ratio Move
PICTURE
OK
: 16:9
Aspect Ratio Picture Wizard
OK
Picture Wizard
ꕊ Energy Saving : Off
ꔉ
➩
Vivid
Vivid
ꕊ Energy Saving : Off
:: Vivid
Standard
Picture
Picture Mode
Mode :: Vivid
Standard
• Backlight 100
• Backlight 100
Sport
• Contrast 100
• Contrast Game
• Brightness 50
• Brightness 50
• Sharpness 70
• Sharpness 70
MENU
2
ꔉ
Standard
ꔉ
Cinema
Picture
Picture Mode
Mode ▼
1
Move
: 16:9
100
ꕋ Expert 1
ꕋ Expert 2
▼
Select PICTURE.
Select Picture Mode.
3
Select Vivid, Standard, Cinema, Sport or Game
4
Select Backlight, Contrast, Brightness, Sharpness, Colour, Tint or Colour
Temperature.
5
Make appropriate adjustments.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
! NOTE
74
►You
►
cannot adjust colour and tint in the RGB-PC / HDMI-PC mode.
►When
►
the Expert 1/2 is selected, you can select Backlight, Contrast, Brightness, H Sharpness, V
Sharpness, Colour or Tint .
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special video
screen.
You can set the video value differently for each input.
To reset to the factory default screen after making adjustments to each video mode, execute the “Picture
Reset” function for each Picture Mode.
PICTURE
Move
PICTURE
OK
▲
Move
OK
▲
• Brightness 50
• Brightness 50
• Sharpness 70
• Sharpness 70
• Colour • Colour • Tint • Tint • Colour Temperature0
•• Advanced
Advanced Control
Control
• Colour Temperature0 Gamma
•• Advanced
ꔉ
Advanced Control
Control Black Level
• Picture Reset
Film Mode
➩
50
0
ꔉ
• Picture Reset
Screen
Screen
50
0
Dynamic Contrast
Off
Dynamic Colour
Off
Noise Reduction
Off
◄ High ►
Off
Off
Close
1
2
3
MENU
PICTURE CONTROL
Select PICTURE.
Select Advanced Control.
Select Dynamic Contrast, Dynamic Colour, Noise Reduction, Gamma, Black Level
or Film Mode. (Refer to p. 77 to 78)
4
Select your desired Source.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
75
PICTURE CONTROL
EXPERT PICTURE CONTROL
By segmenting categories, Expert 1 and Expert 2 provide more categories which users can set as they
see fit, offering the optimal picture quality for users.
This may also be used to help a professional optimize the TV performance using specific videos.
PICTURE
Aspect Ratio Move
PICTURE
OK
: 16:9
Move
OK
▲
Nosie Reduction
Off
Off
Picture Wizard
• Contrast ꕊ Energy Saving : Off
• Brightness 50
Gamma
• H Sharpness 50
Black Level
• V Sharpness 49
Off
• Colour Film Mode
Colour Standard
HD
Expert
ꔉ Pattern
Off
Picture
Picture Mode
Mode Vivid
:: ꕋ
Expert 1
Standard
Standard
• Backlight Cinema
70
Sport
90
PICTURE CONTROL
• Contrast • Brightness Game
50
ꕋ
ꕋ Expert
Expert 1
1
• H Sharpness 70
➩
ꔉ
▼
ꔉ
ꕋ Expert 2
90
Dynamic Contrast
50
• Tint 0
•• Expert
Control
Advanced
Control
• Picture Reset
▼
◄ Medium ►
High
Colour Filter
Off
Colour Temperature
Warm
Close
1
2
3
4
5
6
MENU
Select PICTURE.
Select Picture Mode.
Select ꕋ Expert 1 or ꕋ Expert 2.
Select Expert Control.
Select your desired Source.
Make appropriate adjustments.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
76
Dynamic Contrast
(Off/Low/High)
■■ Adjusts the contrast to keep it at the best level according to the brightness
of the screen. The picture is improved by making bright parts brighter and
dark parts darker.
Dynamic Colour
(Off/Low/High )
■■ Adjusts screen colours so that they look livelier, richer and clearer. This
feature enhances hue, saturation and luminance so that red, blue, green
and white look more vivid.
Noise Reduction
(Off/Low/Medium/High)
■■ Reduces screen noise without compromising video quality.
Black Level
(Low/High/Auto)
• Low: The picture of the screen gets darker.
• High: The picture of the screen gets brighter.
• Auto: Realizing the black level of the screen and set it to High or Low
automatically.
■■ Set black level of the screen to proper level.
■■ This function enables to select 'Low' or 'High' in the following mode:
AV(NTSC-M), HDMI or Component. Otherwise, 'Black level' is set to
'Auto'.
Film Mode
(On/Off)
Colour Standard
(SD/HD)
PICTURE CONTROL
Gamma
(Low/Medium/High)
■■ You can adjust brightness of dark area and middle gray level area of
the picture.
• Low: Make dark and middle gray level area of the picture brighter.
• Medium: Express original picture levels.
• High: Make dark and middle gray level area of the picture darker.
■■ You can watch a cinema-like video by eliminating judder effect.
■■ Use this function when you watch movies.
■■ Converts the colour of a different video to HD colour. This function is
set for SD video (BT-601) and HD video (BT-709) colour format.
77
PICTURE CONTROL
Expert Pattern
(Off/Expert 1/Expert 2)
■■ This is the pattern necessary for expert adjustment.
■■ This function is enabled in "Picture Mode - Expert" when you watch DTV.
Colour Filter
(Off/Red/Green/Blue)
■■ This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
■■ This is the function to adjust the overall colour of the screen to the
feeling you want.
a. • Method: 2 Points
PICTURE CONTROL
• Pattern: Inner, Outer
• Red/Green/Blue Contrast, Red/Green/Blue Brightness :
Colour Temperature
(Medium/Warm/Cool)
The adjustment range is -50 to +50.
b. • Method: 10 point IRE
• Pattern: Inner / Outer
• IRE (Institute of Radio Engineers) is the unit to display the size of
the video signal and can be set among 10, 20, 30 to 100. You can
adjust Red, Green or Blue according to each setting.
• Red/Green/Blue: The adjustment range is -50 to +50.
Colour Management
System
■■ As the tool used by the experts to make adjustments by using the
test patterns, this does not affect other colours but can be used to
selectively adjust the 6 colour areas (Red/Green/Blue/Cyan/
Magenta/Yellow).
Colour difference may not be distinctive even when you make the
adjustments for the general video.
■■ Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
• Red/Green/Blue/Yellow/Cyan/Magenta Colour: The adjustment
range is -30 to +30.
• Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range
is -30 to +30.
■■ This feature is disable in RGB-PC and HDMI (PC) mode.
78
PICTURE RESET
Settings of the selected picture modes BACK to the default factory settings.
PICTURE
Move
PICTURE
OK
▲
• Brightness 50
• Brightness 50
• Sharpness 70
• Sharpness 70
• Colour • Tint • Colour Temperature0
• Colour 60
All picture setting will be resetted.
• Tint 0
continue?
• Colour Temperature0
• Advanced Control
•• Picture
Picture Reset
Reset
➩
50
0
3
ꔉ
?
• Advanced Control
•• Picture
Yes
Picture Reset
Reset
ꔉ
NO
Screen
Select PICTURE.
Select Picture Reset.
PICTURE CONTROL
2
MENU
OK
Screen
1
Move
▲
Select Yes or No.
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
79
PICTURE CONTROL
SCREEN SETUP FOR PC MODE
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC] mode.
M2080D / M2080DF / M2080D / M2080DN
<Vertical resolution : 900>
SCREEN
Resolution
<Vertical resolution : 768>
PICTURE
Move
OK
SCREEN
▲
Resolution
PICTURE CONTROL
• Brightness 50
• Sharpness 70
• Colour • Tint • Colour Temperature0
Size
• Advanced Control
Phase
Screen
Screen
• Picture Reset
➩
50
0
ꔉ
Move
►
1024 x 768
Auto Config.
1280 x 768
Position
1360 x 768
Reset
Move
►
Prev.
1280 x 960
Auto Config.
1440 x 900
Position
1600 x 900
Size
Prev.
Phase
Reset
M2280D / M2380D / M2780D
M2280DF / M2380DF / 2780DF
M2280DB / M2380DB
M2280DN / M2380DN / M2780DN
<Vertical resolution : 900>
SCREEN
Resolution
Move
►
Prev.
1280 x 960
Auto Config.
1440 x 900
Position
1600 x 900
Size
Phase
Reset
1
2
3
4
MENU
Select PICTURE.
Select Screen.
Select Resolution.
Select the desired resolution.
5
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
80
Auto Configure (RGB [PC] mode only)
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is
still not correct, your set is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, clock, and phase The displayed image
will be unstable for a few seconds while the auto configuration is in progress.
1. Using OSD
PICTURE
Move
2
3
4
5
MENU
Move
Prev.
Resolution
• Brightness 50
• Sharpness 70
• Colour • Tint • Colour Temperature0
• Advanced Control
➩
50
0
Auto Config.
►
Position
Size
To Set
Yes
No
Phase
• Picture Reset
ꔉ
Select PICTURE.
Select Screen.
Select Auto Config.
Reset
PICTURE CONTROL
1
▲
Screen
Screen
SCREEN
OK
• If the position of the image is still not correct, try
Auto adjustment again.
• If picture needs to be adjusted again after Auto
adjustment in RGB (PC), you can adjust the Posi
tion, Size or Phase.
Select Yes.
Run Auto Config.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
81
PICTURE CONTROL
2. Using Auto Config. (Remocon)
This function is available for RGB signals only.
M2080D / M2080DF / M2080DB / M2080DN
1
Auto Config.
Press Auto Config.
Auto in progress
<1600 x 900 Resolution>
Auto in progress
For optimal display
change resolution 1600 x 900
<Others Resolution>
PICTURE CONTROL
82
2
M2280D / M2380D / M2780D / M2280DF / 2380DF / M2780DF
M2280DB / M2380DB / M2280DN / M2380DN / M2780DN
Auto Config.
Press Auto Config.
Auto in progress
<1920 x 1080 Resolution>
Auto in progress
For optimal display
change resolution 1920 x 1080
<Others Resolution>
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the
picture phase manually.
This function works in the following mode: RGB[PC].
PICTURE
Move
• Brightness 50
• Sharpness 70
• Colour • Tint • Colour Temperature0
• Advanced Control
1
2
3
4
MENU
Move
Prev.
Resolution
➩
50
0
Auto Config.
Position
►
Size
Phase
• Picture Reset
ꔉ
Reset
Select PICTURE.
Select Screen.
PICTURE CONTROL
Screen
Screen
SCREEN
OK
▲
Select Position, Size or Phase.
Make appropriate adjustments.
5
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
83
PICTURE CONTROL
Screen Reset
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode: RGB[PC].
PICTURE
Move
• Brightness 50
• Sharpness 70
• Colour • Tint • Colour Temperature0
• Advanced Control
PICTURE CONTROL
Screen
Screen
1
2
3
4
5
MENU
SCREEN
OK
▲
Move
Prev.
Resolution
➩
50
0
Auto Config.
Position
To Set
Size
Yes
No
Phase
• Picture Reset
ꔉ
Reset
►
Select PICTURE.
Select Screen.
Select Reset.
Select Yes.
Run Reset.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
84
SOUND CONTROL
AUTO VOLUME LEVELER
AVL automatically remains on the same level of volume if you change programmes.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed
every time the channel is changed. This feature allows users to enjoy stable volume levels by making
automatic adjustments for each program.
If sound quality or volume is not at the level you want, it is recommended to use a separate home theater
system or amp to cope with different user environments.
AUDIO
Move
Auto
Auto Volume
Volume : Off
Clear Voice II : Off ꕅ3
AUDIO
OK
ꔉ
Balance ➩
0
: Music
• Surround X • Treble 50
• Bass 50
• Reset
: Off
▼
1
2
3
MENU
: Off
Clear Voice II : Off ꕅ3
OK
ꔉ
Off
Off
Balance ꔉ
On
0
Sound Mode : Music
• Surround X • Treble 50
• Bass 50
• Reset
: Off
▼
Select AUDIO.
Select Auto Volume.
SOUND CONTROL
Sound Mode Move
Auto
Auto Volume
Volume Select On or Off.
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
85
SOUND CONTROL
CLEAR VOICE II
By differentiating the human sound range from others, it helps users listen to human voices better.
AUDIO
Auto Volume Clear
Clear Voice
Voice IIII Move
: Off
Off ꕅ3
ꕅ3
:: Off
AUDIO
OK
ꔉ
Balance ➩
0
Sound Mode : Music
• Surround X • Treble • Bass • Reset
Auto Volume Clear
Clear Voice
Voice IIII SOUND CONTROL
2
3
MENU
OK
• Clear Voice II
ꔉ
0• Level
Balance Sound Mode : Music
• Surround X 50
• Treble 50
50
• Bass 50
• Reset
: Off
▼
1
Move
: Off
Off ꕅ3
ꕅ3
:: Off
◄
Off
Close
: Off
▼
Select AUDIO.
Select Clear Voice II.
• If you select “On” for Clear Voice II, Surround X
feature will not work.
• Select levels from ‘-6’ to ’+6’.
Select On or Off.
Adjustment for Clear Voice Level With selecting On
4
5
Select Level.
Make desired adjustment.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
86
►
3
BALANCE
You can adjust the sound balance of the speakers to preferred levels.
AUDIO
Move
Auto Volume : Off
Clear Voice II : Off ꕅ3
Balance
Balance AUDIO
OK
0
ꔉ
0
Sound Mode : Music
• Surround X • Treble 50
• Bass 50
• Reset
: Off
▼
2
3
MENU
: Off
Clear Voice II : Off ꕅ3
Balance
Balance OK
Sound Mode 0
Balance
: Standard
• Surround X • Treble 50
• Bass 50
• Reset
0
0
◄
ꔉ
►
:Close
Off
▼
Select AUDIO.
Select Balance.
Make desired adjustment.
SOUND CONTROL
1
➩
Move
Auto Volume • Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
87
SOUND CONTROL
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can
also adjust the Treble, Bass.
Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content.
Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
Standard Music Cinema Sport Game Offers standard-quality sound.
Optimizes sound for listening to music.
Optimizes sound for watching movies.
Optimizes sound for watching sports events.
Optimizes sound for playing games.
AUDIO
Move
Auto Volume : Off
Clear Voice II : Off ꕅ3
SOUND CONTROL
Balancze AUDIO
OK
0
ꔉ
Sound
Sound Mode
Mode Music
: Standard
• Surround X • Treble 50
• Bass 50
• Reset
: Off
➩
: Off
Clear Voice II : Off ꕅ3
Balance 2
3
MENU
OK
0
ꔉ
Sound
Sound Mode
Mode music :: Standard
• Surround Standard
X
: Off
music
• Treble Music
50
• Bass • Reset
▼
1
Move
Auto Volume ▼
ꔉ
Cinema
50
Sport
Game
• You can also adjust Sound Mode in the Q. Menu.
Select AUDIO.
Select Sound Mode.
Select Standard, Music, Cinema, Sport or Game.
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
88
PRESET SOUND SETTINGS-USER MODE
AUDIO
Move
Auto Volume : Off
Clear Voice II : Off ꕅ3
Balance AUDIO
OK
0
ꔉ
Sound
Sound Mode
Mode : Standard
Music (User)
• Surround X • Treble 50
• Bass 50
• Reset
➩
Move
Auto Volume : Off
Clear Voice II : Off ꕅ3
Balance : Off
MENU
2
0
Sound
Sound Mode
Mode : Standard
Music (User)
• Surround Standard
X
: Off
Music
• Treble Music
50
• Bass • Reset
▼
1
OK
ꔉ
ꔉ
Cinema
50
Sport
Game
▼
Select AUDIO.
Select Sound Mode.
3
4
SOUND CONTROL
Select Standard, Music, Cinema, Sport or Game.
Select Treble or Bass.
5
Set the desired sound level.
Surround X
Select this option to sound realistic.
Enhance sound depth and darity by maximizing Surround effect.
1
2
3
4
MENU
Select AUDIO.
AUDIO
Select Surround X.
: Off
Clear Voice II : Off ꕅ3
Balance Sound Mode Select On or off
Move
Auto Volume OK
0
: Music
Off
ꔉ
:•:Off
Surround
X
Surround X
X
•• Surround
• Treble 50
• Bass 50
• Reset
▼
◄
• Treble
50
• Bass
50
Off
►
Close
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
89
SOUND CONTROL
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
Move
AUDIO
OK
Move
Sound Mode : Music
• Surround X :
• Treble 50
50
➩
Off
SOUND CONTROL
2
3
MENU
Sound Mode : Music
• Surround X :
• Treble • Bass Reset
•• Reset
Digital Audio Out : PCM
Digital Audio Out : PCM
TV Speaker : On
TV Speaker : On
ꔉ
Off
50
• Bass 50
Resetting sound mode configuration...
Reset
ꔉ
•• Reset
DTV Audio Setting : Auto
DTV Audio Setting : Auto
1
OK
▲
▲
Select AUDIO.
Select Reset.
Initialize the adjusted value.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
90
DIGITAL AUDIO OUT
This function allows you to select your preferred Digital Audio Output.
The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio.
When Dolby digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF (Sony Philips
Digital InterFace) output to Dolby Digital.
If Auto is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be
PCM (Pulse-code modulation).
Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby Digital
Audio, only Dolby Digital will be played.
AUDIO
Move
AUDIO
OK
Move
▲
Sound Mode : Music
• Surround X :
• Treble 50
• Bass 50
• Reset
Digital Audio
Audio Out
Out Digital
PCM
:: PCM
TV Speaker : On
➩
Off
ꔉ
2
3
MENU
Sound Mode : Music
• Surround X :
• Treble 50
• Bass 50
Digital
Digital Audio
Audio Out
Out • Reset
:: PCM
PCM
Auto
PCM
PCM
TV Speaker : On
Off
ꔉ
ꔉ
DTV Audio Setting : Auto
Manufactured under license from
Dolby Laboratories. “Dolby “and
the double-D symbol are trademarks of Dolby Laboratories.
Select AUDIO.
Select Digital Audio Out.
Select Auto or PCM.
4
Item
• There is a possibility that when HDMI mode,
some DVD players do not make SPDIF sound.
At that time, set the output of the digital audio
of the DVD player to PCM. (In HDMI, Dolby
Digital Plus is not supported).
Audio Input
Digital Audio output
Auto (Speaker On)
MPEG
Dolby Digital
Dolby Digital Plus
HE-AAC
PCM
Dolby Digital
Dolby Digital
PCM
Auto (Speaker Off)
MPEG
Dolby Digital
Dolby Digital Plus
HE-AAC
PCM
Dolby Digital
Dolby Digital
Dolby Digital
PCM
PCM
SOUND CONTROL
DTV Audio Setting : Auto
1
OK
▲
PCM
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
91
SOUND CONTROL
TV SPEAKERS ON / OFF SETUP
You can adjust the TV internal speaker status.
In AV1, AV2, COMPONENT, RGB and HDMI 1 or HDMI with HDMI to DVI cable, the TV speaker can be
operational even when there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
AUDIO
Move
AUDIO
OK
▲
Sound Mode : Music
• Surround X :
• Treble 50
• Bass 50
• Reset
Digital Audio Out : PCM
TV
TV Speaker
Speaker On
:: On
SOUND CONTROL
MENU
2
OK
▲
➩
Off
Sound Mode : Music
• Surround X :
• Treble 50
• Bass 50
• Reset
Digital Audio Out ꔉ
DTV Audio Setting : Auto
1
Move
TV
TVSpeaker
Speaker : PCM
:: On
On
DTV Audio Setting : Auto
Off
Off
On
On
ꔉ
ꔉ
Select AUDIO.
Select TV Speaker.
3
Select On or Off.
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
! NOTE
►When
►
the TV speaker is turned off while the Simplink home theater is operating, the sound output automatically switches to the Home theater speaker, but when the TV speaker is turned on, the sound output
the TV speaker.
►Some
►
menus in AUDIO are disabled when TV Speaker is set to Off.
92
DTV AUDIO SETTING (IN DIGITAL MODE ONLY)
When different audio types exist in an input signal, this function allows you to select the audio type you want.
AUDIO
Move
AUDIO
OK
▲
OK
▲
Sound Mode : Music
• Surround X :
• Treble 50
• Bass 50
• Reset
Digital Audio Out : PCM
TV Speaker : On
DTV Audio
Audio Setting
Setting : Auto
DTV
: Auto
Move
➩
Off
ꔉ
Sound Mode : Music
• Surround X :
• Treble 50
• Bass 50
• Reset
Digital Audio Out : PCM
TV Speaker : On
DTV
DTV Audio
Audio Setting
Setting: Auto
: Auto
Off
Auto
Auto
HE-AAC
ꔉ
ꔉ
Dolby Digital
MPEG
2
3
MENU
Select AUDIO.
Select DTV Audio Setting.
SOUND CONTROL
1
Select Auto, HE-AAC, Dolby Digital or MPEG.
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
• Auto: Automatically outputs in the order HE - AAC ► Dolby Digital ► MPEG.
• HE - AAC, Dolby Digital, MPEG: Allows users to select the audio type they want.
If MPEG is selected, MPEG is always outputted.
If MPEG is not supported, HE - AAC and Dolby Digital are selected in that order.
• Refer to p. 100 (Audio Language Selection)
93
SOUND CONTROL
I/II
Stereo/Dual Reception (In Analogue Mode Only)
When a programme is selected, the sound information for the station appears with the programme number and station name.
1
Select Audio.
2
Select the sound output.
SOUND CONTROL
Broadcast
On Screen Display
Mono
Stereo
Dual
MONO
STEREO
DUAL I , DUAL II , DUAL I + II
■■Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity
of sound is improved.
■■Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or
DUAL I + II.
DUAL I DUAL I I DUAL I+I I 94
Sends the primary broadcast language to the loudspeakers.
Sends the secondary broadcast language to the loudspeakers.
Sends a separate language to each loudspeaker.
NICAM Reception (In Analogue Mode Only)
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
1
When NICAM mono is received, you can select NICAM MONO or MONO.
2
When NICAM stereo is received, you can select NICAM STEREO or MONO.
If the stereo signal is weak, switch to MONO.
3
When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or
NICAM DUAL I+II or MONO.
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
SOUND CONTROL
Speaker Sound Output Selection
Select the sound output.
L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input
is sent to the right loudspeaker.
L+L: Audio signal from audio L input is sent to left and right loudspeakers.
R+R: Audio signal from audio R input is sent to left and right loudspeakers.
95
TIME SETTING
CLOCK SETUP
The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the
TV has no DTV signal.)
You must set the time correctly before using on/off timer function.
When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone
and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.
Once Clock is set in DTV mode, you cannot change time, but if the city name in Time Zone is changed
into offset, you can change time by 1 hour.
TIME
Move
TIME
OK
ꔉ
Clock
Clock Off Time : Off
On Time : Off
Sleep Timer : Off
Automatic Standby : 4 hours
Move
Clock
Clock ➩
Off Time : Off
On Time : Off
Sleep Timer : Off
Date
OK
Month
ꔉ
01
Mar
Year
2010
Hour
16
Automatic Standby : 4 hoursMinute
09
Time Zone
London
TIME SETTING
GMT
Close
1
2
3
4
MENU
Select TIME.
Select Clock.
Select either the year, month, date, time or Time Zone option.
Set the year, month, date, time or Time Zone option.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
96
AUTO ON/OFF TIME SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby
mode unless a button has been pressed.
The Off time function overrides the On time function if both are set to the same time.
The TV must be in standby mode for the On time to work.
TIME
Move
TIME
OK
Clock
Move
Clock
Off Time : Off
On
On Time
Time :: Off
Off
Sleep Timer : Off
ꔉ
➩
Off Time : Off
On
On Time
Time :: Off
Off
Sleep Timer OK
ꔐ 11 Feb. 2010 19:48
Repeat
Hour
ꔉ
◄
►
00
: Off
Automatic Standby : 4 hoursMinute
Automatic Standby : 4 hours
Off
00
Input
Antenna
Programme
TV1
Volume
30
Close
1
3
4
5
6
Select TIME.
• To cancel On/Off Time function, select Off.
• For On Time function only
Select Off Time or On Time.
1
Select Repeat.
2
Select Off, Once, Daily, Mon ~ Fri,
Mon ~ Sat, Sat ~ Sun or Sun.
3
4
Set the hour.
Select Input.
Select the input source.
TIME SETTING
2
MENU
Set the programme.
Adjust volume level at
switch-on.
Set the minutes.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
97
TIME SETTING
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
1
Select Sleep Timer.
2
Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 min.
• When you switch the TV off, the preset sleep timer is cancelled.
• You can also adjust Sleep Timer in the TIME menu.
AUTOMATIC STNADBY SETTING
TIME SETTING
If you do not press any button when Automatic Standby function is on, the TV automatically switches to
the standby mode.
1
MENU
Select TIME.
2
Select Automatic Standby.
3
Select Off, 4 hours, 6 hours or 8 hours.
4
Save.
! NOTE
►This
►
function does not work on Store Demo mode or while Software update.
►This
►
function does not work on RGB-PC/HDMI-PC mode.
98
OPTION SETTING
ON-SCREEN MENU LANGUAGE /
COUNTRY SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
1
Select your desired language.
2
Select your country.
• If you want to change Language/ Country selection
1
MENU
Select OPTION.
2
Select Menu Language or Country.
3
4
• When France is selected for Country,
password is not '0' , '0' , '0' , '0' but '1' , '2' ,
'3' , '4' .
Select your desired language or country.
Save.
! NOTE
OPTION SETTIN
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
►If
► you do not finish the set-up Installation Guide by pressing RETURN or if you time out on the OSD (On
Screen Display) the installation menu will continuously appear until the set up is completed whenever the
TV is switched on.
►If
► you select the wrong local country, teletext may not appear correctly on the screen and some problems
may occur during teletext operation.
►The
►
CI (Common Interface) function may not be applied based on country broadcasting circumstances.
►DTV
►
mode control buttons may not function based on country broadcasting circumstances.
►In
► country that Digital broadcasting regulation isn’t fixed, some DTV function may not work depending on
digital broadcasting circumstances.
►The
►
Country Setting "UK" should only be activated in UK.
►If
► the country setting is set to "--", European terrestrial/cable digital standard broadcasting programmes
are available, but some DTV functions may not work properly.
99
OPTION SETTING
LANGUAGE SELECTION (IN DIGITAL MODE ONLY)
The Audio function allows selection of a preferred language.
If audio data in a selected language is not broadcast, the default language audio will be played.
Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
When the languages you selected as the primary for Audio Language and Subtitle Language are not
supported, you can select language in secondary category.
1
MENU
1
Select OPTION.
2
Select Audio Language or
Subtitle Language.
3
Select your desired language.
4
MENU
Select OPTION.
2
Select Disabled
Assistance.
3
Select Hard of
Hearing(ꔞ).
4
Save.
Select On or Off.
• Press the BACK button to move to the previous menu screen.
OPTION SETTIN
< Audio Language Selection >
►When two or more audio languages are broadcast, you can select the audio language.
1
2
3
Select Audio.
Select an audio language.
Audio Language OSD Information
Display
N.A
꘏
ꕂ
ꔔ
ꔬ
ꔩ
ꔰ
Select L+R, L+L or R+R.
Status
Not Available
MPEG Audio
Dolby Digital Audio
Audio for “Visual Impaired”
Audio for “Hearing Impaired”
Dolby Digital Plus Audio
AAC Audio
Subtitle Language OSD Information
< Subtitle Language Selection >
Display
Status
►When two or more subtitle languages are broadN.A
Not Available
cast, you can select the subtitle language with
ꔇ
Teletext Subtitle
the SUBTITLE button on the remote control.
ꔬ
Subtitle for “Hard of Hearing”
►Press the ꕌꕍ button to select a subtitle language.
• The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service provider.
• When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the TV may output a part of the Main audio.
100
AUDIO DESCRIPTION (IN DIGITAL MODE ONLY)
This function is for the blind, and provides explanatory audio describing the current situation in a TV
programme in addition to the basic audio.
When Audio Description On is selected, basic audio and Audio Description are provided only for those
programmes that have Audio Description included.
OPTION
Move
OPTION
OK
: English
Menu Language
: English
Audio Language
: English
Audio Language
: English
Subtitle Language : English
ꔉ
Disabled
DisabledAssistance
Assistance
➩
: MHEG
Data Service
Audio Description
: MHEG
: ­Ireland
Country : ­Ireland
● Volume
Input Label
:1
Set ID
▼
3
4
:1
◄
Off
►
Antenna
0
Close
▼
Select OPTION.
Select Disabled Assistance.
Select Audio Description.
Select On or Off.
OPTION SETTIN
2
Subtitle Language : English
Hard of Hearing( ꔞ)
Disabled
ꔉ
Disabled Assistance
Assistance
Country Set ID
MENU
OK
Data Service
Input Label
1
Move
Menu Language
Adjustment for Audio Description Volume With selecting On
5
6
Select Volume.
Make desired adjustment.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
101
OPTION SETTING
DATA SERVICE
(This menu is enabled only in Ireland. )
This function allow users to choose between MHEG (Digital Teletext) and Teletext if both exist at the
same time.
If only one of them exists, either MHEG or Teletext is enabled regardless of which option you selected.
OPTION
Move
OPTION
OK
: English
Menu Language
: English
Audio Language
: English
Audio Language
: English
➩
Subtitle Language : English
Disabled Assistance
Data
Data Service
Service
: MHEG
Country : ­Ireland
ꔉ
Set ID
MHEG
MHEG
MHEG
:: MHEG
Teletext
: ­Ireland
ꔉ
ꔉ
Set ID
:1
▼
OPTION SETTIN
Select OPTION.
2
Select Data Service.
3
4
Disabled Assistance
Data
Data Service
Service
Input Label
:1
▼
MENU
OK
Subtitle Language : English
Country Input Label
1
Move
Menu Language
Select MHEG or Teletext.
Save.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
102
INPUT LABEL
Selects a label for each input source.
OPTION
Move
OPTION
OK
Menu Language
: English
Menu Language
Audio Language
: English
Audio Language
➩
Subtitle Language : English
Disabled Assistance
Country : ­Ireland
ꔉ
Input
InputLabel
Label
Set ID
Power Indicator
:1
: On
▼
Move
OK
: English
: English
AV1
Subtitle Language : English
AV2
Disabled Assistance
Component
Country : ­Ireland
RGB
Input
ꔉ
InputLabel
Label
HDMI1
Set ID
:1
Power Indicator
: On HDMI2
▼
◄
►
Close
If you want to use HDMI-PC mode, you must set the input label to PC mode.
(Refer to the below figure)
OPTION
Menu Language
Move
OK
: English
Audio Language
▼
1
2
3
4
MENU
◄
PC
►
PC
Close
Select OPTION.
OPTION SETTIN
: English
AV1
Subtitle Language : English
AV2
Disabled Assistance
Component
Country : ­Ireland
RGB
Input
ꔉ
InputLabel
Label
HDMI1
Set ID
:1
HDMI2
Power Indicator
: On
Select Input Label.
Select the source.
Select the label.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
103
OPTION SETTING
POWER INDICATOR
Select the power indicator on of off.
Power indicator On
- Normal Mode: Blue LED On.
- Off Mode: LED Off
Power indicator Off
- Normal Mode: Blue LED Off.
- Off Mode: LED Off
OPTION
Move
OPTION
OK
▲
Disabled Assistance
Country Input Label
: ­- -
Set ID
:1
Power
PowerIndicator
Indicator
::On
On
Demo Mode
: Off
Mode Setting
: Home Use
➩
ꔉ
Factory Reset
OPTION SETTIN
1
2
3
MENU
Move
OK
▲
Disabled Assistance
Country Input Label
: ­- -
Set ID
Demo Mode
:1
::On
OnOff
On
On
: Off
Mode Setting
: Home Use
Power
PowerIndicator
Indicator
ꔉ
ꔉ
Factory Reset
Select OPTION.
Select Power Indicator.
Select On or Off.
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
104
DEMO MODE
Display the slide show to explain the various logo of this TV.
It is not possible to use Demo Mode in Home Use mode.
In Store Demo, Demo Mode is automatically set to On.
Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is reset.
The screen is reset automatically after 5 minutes in Demo Mode.
OPTION
Move
OPTION
OK
▲
Disabled Assistance
Country Input Label
: ­- -
Set ID
:1
Power Indicator
: On
Demo
DemoMode
Mode
::Off
Off
Mode Setting
: Home Use
➩
3
4
OK
: ­- -
Set ID
:1
ꔉ
Demo
DemoMode
Mode
Mode Setting
: On
Off
Off
::Off
Off
On Use
: Home
ꔉ
ꔉ
Factory Reset
OPTION SETTIN
2
MENU
Country Input Label
Power Indicator
Factory Reset
1
Move
▲
Disabled Assistance
Select OPTION.
Select Demo Mode.
Select On to show the various logo of TV.
Return to TV viewing.
If you want to stop the demo, press any button. (Except for MUTE,
+ , - button)
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
105
OPTION SETTING
MODE SETTING
We recommend setting the TV to “Home Use” mode for the best picture in your home environment.
“Store Demo” mode is an optimal setting for displaying at stores..
OPTION
Move
OPTION
OK
▲
Disabled Assistance
Country Input Label
: ­- -
Set ID
:1
Power Indicator
: On
Demo Mode
: Off
Mode
ModeSetting
Setting
::Home
HomeUse
Use
➩
ꔉ
Factory Reset
OPTION SETTIN
1
MENU
OK
Country Input Label
: ­- -
Set ID
:1
Power Indicator
Demo Mode
Selecting the environment.
: On
Choose the setting mode you want.
: Off
Mode
ModeSetting
Setting
::Home
HomeUse
Use
Factory Reset
Store Demo
ꔉ
Home Use
Select [Home Use] to use this TV at home.
To use this TV at store, select [Store Demo].
Select OPTION.
2
Select Mode Setting.
3
4
Move
▲
Disabled Assistance
Select Store Demo or Home Use.
Save.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
106
INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS)
This function initializes all settings.
But the settings of ꕋ Day and ꕋ Night of the Picture Mode cannot be initialized.
It is useful to initialize the product or when you move to other city or country.
When the Factory Reset is completed, you must restart the Initializing setup.
When the Lock System menu is "On", the message to enter the password appears.
OPTION
Move
OPTION
OK
▲
Disabled Assistance
Country Input Label
: ­- -
Set ID
:1
Power Indicator
: On
Demo Mode
Mode Setting
Move
Country Input Label
: ­- -
Set ID
:1
Power Indicator
: On
: Off
Demo Mode
: Off
: Home Use
Mode Setting
Factory
FactoryReset
Reset
OK
▲
Disabled Assistance
➩
ꔉ
Factory
FactoryReset
Reset
All user settings and channel
settings will be reset. Still
: Home Use
Continue?
ꔉ
Yes
2
3
4
MENU
• In Lock System "On", if you forget your pass-
Select OPTION.
word, press '0', '3', '2', '5' on the remote control
handset.
Select Factory Reset.
OPTION SETTIN
1
No
Select Yes.
Start Factory Reset.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
107
PARENTAL CONTROL / RATINGS
SET PASSWORD & LOCK SYSTEM
Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset.
When France is selected for Country, password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’,’2’,’3’,’4’.
When France is selected for Country, password cannot be set as ‘0’, ‘0’, ‘0’, ‘0’.
If a channel is locked, enter the password to unlock it temporarily.
LOCK
Move
LOCK
OK
Set Password
Lock
LockSystem
System 1
2
PARENTAL CONTROL / RATINGS
3
4
5
MENU
Move
OK
Set Password
ꔉ
::Off
Off
• Block Programme
• Parental Guidance
• Input Block
Key Lock
: Off
Select LOCK.
Lock
LockSystem
System ➩
Off
::Off
Off
Off
ꔉ
On Programme
• Block
• Parental Guidance
• Input Block
Key Lock
: Off
ꔉ
• If you forget your password, press ‘0’, ‘3’, ‘2’, ‘5’ on
the remote control handset.
Select Lock System.
Select On.
Set the password.
Input a 4-digit password.
Be sure to remember this number!
Re-enter new password for confirm.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
108
BLOCK PROGRAMME
Blocks any programmes that you do not want to watch or that you do not want your children to watch.
This function is available in Lock System “On”.
Enter a password to watch a blocked programme.
1
LOCK
Move
YLE TV1
OK
Set Password
Lock System : ON
•• Block
Block Programme
Programme ꔉ
• Parental Guidance
• Input Block
Key Lock
: Off
➩
Pr. Change
Navigation
RADIO
DTV
TV
1 YLE TV1
2 YLE TV2
4 TV4 Stockholm
5 YLE FST
6 CNN
8 YLE24
9 YLE Teema
14 TV4 Film
24 TV4 Fakta
50 TV400
24 TV4 Fakta
84 Kanal Lokal
24 TV4 Fakta
86 Info/3sat
87 Doku/Kika
88 TVE 1
Page Change
Previous
Block / Unblock
1
2
4
Select LOCK.
Select Block Programme.
Enter the Block Programme.
GREEN Select a programme to be locked.
PARENTAL CONTROL / RATINGS
3
MENU
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
109
PARENTAL CONTROL / RATINGS
PARENTAL CONTROL (IN DIGITAL MODE ONLY)
This function operates according to information from the broadcasting station. Therefore if the signal has
incorrect information, this function does not operate.
A password is required to gain access to this menu.
This set is programmed to remember which option it was last set to even if you switch the set off.
Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
Enter a password to watch a blocked programme.
LOCK
Move
LOCK
OK
Set Password
Set Password
Lock System : ON
• Block Programme
• Parental Guidance ꔉ
Lock System ➩
• Input Block
Key Lock
: Off
Key Lock
Move
OK
Blocking
Off : Permits all
programmes
: ON
10 and above
• Block Programme
11 and above
• Parental Guidance ꔉ
12 and above
• Input Block
13 and above
: Off
14 and above
15 and above
16 and above
17 and above
18 and above
Blocking Off
Blocking Off : Permits all
programmes
10 and above
11 and above
12 and above
13 and above
14 and above
15 and above
16 and above
17 and above
18 and
and above
above
18
ꔓ
ꔓ
(Only France)
(Except for France)
PARENTAL CONTROL / RATINGS
1
MENU
Select LOCK.
2
Select Parental Guidance.
3
Make appropriate adjustments.
4
Save
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
110
INPUT BLOCK
Enables you to block an input.
It is available to use this function in Lock System ”On”.
LOCK
Move
LOCK
OK
Set Password
: ON
• Block Programme
Lock System • Parental Guidance
• Input Block
Key Lock
OK
Set Password
Lock System Move
ꔉ
: Off
➩
Key Lock
: ON
AV1
• Block Programme
AV2
• Parental Guidance
Component
• Input Block
ꔉ
RGB
: Off
◄
Off
►
Off
Off
Off
HDMI1
Off
HDMI2
Off
Close
1
Select LOCK.
2
Select Input Block.
3
Select input source.
4
Select On or Off.
5
Save
PARENTAL CONTROL / RATINGS
MENU
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
111
PARENTAL CONTROL / RATINGS
KEY LOCK
The TV can be set so that the remote control is required to control it. This feature can be used to prevent
unauthorized viewing.
LOCK
Move
LOCK
OK
Set Password
1
MENU
: Off
• Block Programme
• Parental Guidance
• Input Block
➩
Lock System : Off
• Block Programme
• Parental Guidance
Key Lock
Lock
Key
• Input Block
::Off
ꔉ
Off
Off
On
On
ꔉ
• In Key Lock ‘On’, if the TV is turned off, press
Select Key Lock.
the INPUT, P ꕌꕍ button on the TV or
POWER, INPUT, P ꕌꕍ, TV/PC or NUMBER
buttons on the remote control then the set will
PARENTAL CONTROL / RATINGS
be turned on.
3
4
::Off
ꔉ
Off
Select LOCK
2
OK
Set Password
Lock System Key Lock
Lock
Key
Move
Select On or Off.
Save
• With the Key Lock On, the display ‘
Key Lock
On ’ appears on the screen if any button on the
front panel is pressed while viewing the TV.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
112
TO USE A USB DEVICE
WHEN CONNECTING A USB DEVICE
When you connect a USB device, this pop up menu is displayed, automatically.
“POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated
or while the Bluetooth Headset is connected.
When the Pop Up menu does not appear, you can select Music List, Photo List or Movie List in the
USB menu.
In USB device, you can not add a new folder or delete the existing folder.
1 Connect the USB device to the USB IN jack
• Only photo(JPEG), music (MP3) and movie (DAT,
MPG, MPEG, VOB, AVI, DIVX, MP4, MKV, TS,
TRP, TP) are supported.
USB IN
on the TV.
When removing the USB device
2
Select PHOTO LIST, MUSIC LIST or
MOVIE LIST
PHOTO LIST
MUSIC LIST
MOVIE LIST
Select the USB Device menu before removing
the USB device.
1
2
Select USB Device.
Select Eject.
3
TO USE A USB DEVICE
113
TO USE A USB DEVICE
Precautions when using the USB device
TO USE A USB DEVICE
114
►►Only a USB storage device is recognizable.
►►If the USB storage device is connected through a USB hub, the device is not recognizable.
►►A USB storage device using an automatic recognition programme may not be recognized.
►►A USB storage device which uses its own driver may not be recognized.
►►The recognition speed of a USB storage device may depend on each device.
►►Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When
such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
►►Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause
the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal
music files, image files or movie files.
►►Please use only a USB storage device which was formatted as a FAT, FAT16, FAT32, NTFS file system provided
with the windows operating system. In case of a storage device formatted as a different utility programme which is
not supported by Windows, it may not be recognized.
►►Please connect power to a USB storage device(over 0.5 A) which requires an external power supply. If not, the
device may not be recognized.
►►Please connect a USB storage device with the cable offered by the device maker.
►►Some USB storage devices may not be supported or operated smoothly.
►►File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100 English
characters.
►►Be sure to back up important files since data stored in a USB memory device may be damaged. We will not be
responsible for any data loss.
►►If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to
connect the external power source.
- Please use a power adaptor for an external power source. We do not guarantee an USB cable for an external
power source.
►►Data in a USB storage device cannot be deleted in the NTFS file system.
►►If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4
partitions or USB memory devices.
►►Only the FAT, FAT16, FAT32 file system supports the delete function.
►►If a USB memory device is connected to a USB multi-card reader, its volume data may not be detected.
►►If the USB memory device does not work properly, disconnect and reconnect it.
►►How fast a USB memory device is detected differs from device to device.
►►If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is turned on.
►►The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory.
►►Any device with more than the recommended capacity may not work properly.
►►If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on again to
make it work properly.
►►USB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list.
►►When a broken file is played in the USB storage, the TV may turn off or work abnormally.
PHOTO LIST
You can view photo files on USB storage device.
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
When you are watching the photo by the Photo List function, you can not change the picture mode.
PHOTO(*.JPEG) supporting file
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
• You can play JPEG files only.
• Non-supported files are displayed in the form of predefined icon.
Screen Components
2
1
MENU
Select Photo List.
Select USB.
3
1 Moves to upper level folder.
2 Current page / Total pages.
Photo List
3 Total number of marked photos.
Page 2/3
Drive1
SGKIM001
4 Corresponding buttons on the
Up Folder
remote control.
1366x768, 125KB
1
Up Folder
Navigation
No Marked
Popup Menu
SG103
02/12/2010
SG101
02/12/2010
SG104
02/12/2010
SG102
02/12/2010
SG105
02/12/2010
SGKIM001
02/12/2010
SGKIM005
02/12/2010
SGKIM002
02/12/2010
SGKIM006
02/12/2010
SGKIM003
02/12/2010
SGKIM007
02/12/2010
SGKIM004
02/12/2010
SGKIM008
02/12/2010
Page Change
MARK
Mark
TO USE A USB DEVICE
2
Exit
4
115
TO USE A USB DEVICE
Photo Selection and PopUp Menu
Photo List
Page 2/3
Drive1
SGKIM001
1366x768, 125KB
Up Folder
Navigation
No Marked
Up Folder
SG103
02/12/2010
SG101
02/12/2010
SG104
02/12/2010
SG102
02/12/2010
SG105
02/12/2010
SGKIM001
02/12/2010
SGKIM005
02/12/2010
SGKIM002
02/12/2010
SGKIM006
02/12/2010
SGKIM003
02/12/2010
SGKIM007
02/12/2010
SGKIM004
02/12/2010
SGKIM008
02/12/2010
Popup Menu
Page Change
MARK
Mark
Exit
➩
Photo List
Page 2/3
Drive1
SGKIM001
Up Folder
1366x768, 125KB
Up Folder
Navigation
1
No Marked
Popup Menu
SG103
02/12/2010
SG101
02/12/2010
SG104
SG102
02/12/2010
SG105
SGKIM001
02/12/2010
SGKIM005
02/12/2010
SGKIM002
02/12/2010
SGKIM006
02/12/2010
SGKIM003
02/12/2010
SGKIM007
02/12/2010
SGKIM004
02/12/2010
SGKIM008
02/12/2010
Page Change
02/12/2010
1366x768, 125KB
02/12/2010
View
ꔉ
Mark All
Delete
Close
MARK
Mark
►►View: Display the selected item.
►►Mark All: Mark all photos on the screen.
►►Unmark All: Deselect all marked photos.
►►Delete or Delete Marked: Delete the selected
photo item.
►►Close: Close the Pop-Up menu.
Exit
Select the target folder or drive.
2
Select the desired photos.
TO USE A USB DEVICE
3
4
Show the Pop-Up menu.
• Use the P ꕌꕍ button to navigation in the
photo page.
• Use the MARK button to mark or unmark a
photo. When one or more photos are marked,
you can view each marked photo or a slide
show of the marked photos. If no photos are
marked, you can view every individual photo
in the folder or a slide show of all photos in the
folder.
Select the desired PopUp menu.
• Press the BACK button to move to the previous menu screen.
116
How to view photo
Detailed operations are available on full-sized photo view screen.
Photo List
Page 2/3
Drive1
SGKIM001
1366x768, 125KB
Up Folder
Navigation
No Marked
Up Folder
SG103
02/12/2010
SG101
02/12/2010
SG104
02/12/2010
SG102
02/12/2010
SG105
02/12/2010
SGKIM001
02/12/2010
SGKIM005
02/12/2010
SGKIM002
02/12/2010
SGKIM006
02/12/2010
SGKIM003
02/12/2010
SGKIM007
02/12/2010
SGKIM004
02/12/2010
SGKIM008
02/12/2010
Popup Menu
Page Change
MARK
Mark
Exit
➩
Photo List
Page 2/3
Drive1
SGKIM001
1366x768, 125KB
Up Folder
Navigation
1
No Marked
Up Folder
Popup Menu
SG103
02/12/2010
SG101
02/12/2010
SG104
SG102
02/12/2010
SG105
SGKIM001
02/12/2010
SGKIM005
02/12/2010
SGKIM002
02/12/2010
SGKIM006
02/12/2010
SGKIM003
02/12/2010
SGKIM007
02/12/2010
SGKIM004
02/12/2010
SGKIM008
02/12/2010
Page Change
02/12/2010
1366x768, 125KB
02/12/2010
View
➩
◄
ꔉ
Slideshow ꘡
Mark All
BGM ꘡
1/17
꘤
Delete
►
Q.MENU
Option
Hide
Delete
Close
MARK
Mark
Exit
The aspect ratio of a photo may change the size of the photo
displayed on the screen in full size.
Press the BACK button to move to the previous menu screen.
Select the target folder or drive.
2
• Use the P ꕌꕍ button to navigation in the
photo page.
3
4
Show the Pop-Up menu.
Select View.
5
The selected photo is displayed in full size.
TO USE A USB DEVICE
Select the desired photos.
• Press the BACK button to move to the previous menu screen.
117
TO USE A USB DEVICE
6
◄
Slideshow ꘡
BGM ꘡
1/17
꘤
Delete
►
Q.MENU
Option
Hide
Select the Slideshow , BGM,
꘤(Rotate), Delete , Option or
Hide.
• Use < > button to select the previous or
next photo.
• Use < > button to select and control the
menu on the full-sized screen.
►►Slideshow : When no picture is selected, all photos in the current folder
are displayed during slide show. If some photos are selected, those
photos are displayed in a slide show.
■■Set the time interval of the slide show in Option.
►►BGM (Background Music): Listen to music while viewing photos in full
size.
■■Set the Music Folder for BGM in Options before using
this function.
TO USE A USB DEVICE
►► ꘤ (Rotate): Rotate photos.
■■Rotates the photo 90°, 180°, 270°, 360° clockwise.
■■It can not be rotate when the width of a picture is bigger
than supported height.
►►Delete: Delete photos.
►►Option: Set values for Slide Speed and Music Folder for BGM.
■■Use ꕌꕍ < > button and OK button to set values. Press
OK to save the settings.
■■You cannot change Music Folder while BGM is playing.
►►Hide: Hide the menu on the full-sized screen.
■■To see the menu again on the full-sized screen, press OK
button to display.
118
Using the Photo List function
Choose Options.
Set Photo View
Set Video.
◄
Slideshow ꘡
1/17
꘤
BGM ꘡
Set Audio.
►
Delete
Q.MENU
Option
Hide
ꕉ Previous
1
Show the PopUp menu.
2
Select Set Photo View, Set Video or Set Audio.
►When
►
you select the Set Photo View,
Set Photo View.
Slide Speed
◄
Music Folder
Fast
►
...
Repeat
◄
On
►
Random
◄
Off
►
1
Show the Slide Speed or Music Folder.
2
Make appropriate adjustments.
• When “Off” is selected in Repeat menu,
replay will stop once the last file in the list
finishes playing. But, when “►►” button is
pressed while the last fine in the list is in
the middle of replay and “Repeat” is in
“Off” position, the first file in the list will be
played and “Repeat” menu will be activated.
TO USE A USB DEVICE
ꕉ Previous
119
TO USE A USB DEVICE
►When
►
you select the Set Video,
Set Video.
Picture Mode
◄
Vivid
►
● Dynamic Contrast
◄
Medium
►
● Noise Reduction
◄
Medium
►
● Backlight
100
● Contrast
100
● Brightness
50
● Colour
50
● Picture Reset
ꕉ Previous
1
Make appropriate adjustments.(Refer to p. 74, 77, 78)
►When
►
you select the Set Audio,
Set Audio.
Sound Mode
◄
Standrd
►
• Auto Volume
◄
Off
►
• Clear Voice II
◄
Off
►
• Balance
0
ꕉ Previous
TO USE A USB DEVICE
120
1
Show the Sound Mode, Auto Volume, Clear Voice II, Balance.
2
Make appropriate adjustments. (Refer to p. 85 to 89)
MUSIC LIST
You can play music files on USB storage device.
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your TV. Images are an example to assist with the TV
operation.
MUSIC (*.MP3) supporting file
Bit rate 32 to 320
• Sampling rate MPEG1 Layer3: 32 kHz, 44.1 kHz, 48 kHz
• Sampling rate MPEG2 Layer3: 16 kHz, 22.05 kHz, 24 kHz
• Sampling rate MPEG2.5 Layer3: 8 kHz, 11.025 kHz, 12 kHz
Screen Components
2
1
MENU
Select Music List.
Select USB.
4
TO USE A USB DEVICE
3
1 Preview: If any album jacket for
the file (Album Art Image) exists,
Music List
this jacket is displayed.
2 Moves to upper level folder.
1
3 Current page / Total pages.
Page 2/3
Title
Music
SGKIM003
5 Corresponding buttons on the
remote control.
00:00/01:34
2
Up Folder
Navigation
Duration
Up Folder
4 Total number of marked music
title.
No Marked
Popup Menu
SGKIM001
03:33
SGKIM002
04:45
SGKIM003
01:30
SGKIM004
02:37
SGKIM005
01:58
Page Change
MARK
Mark
Q.MENU
Option
Exit
5
121
TO USE A USB DEVICE
Music Selection and PopUp Menu
As shown, up to 6 music titles are listed per page.
Music List
No Marked
Duration
Up Folder
00:00/01:34
Up Folder
Navigation
Page 2/3
Title
Music
SGKIM003
SGKIM001
03:33
SGKIM002
04:45
SGKIM003
01:30
SGKIM004
02:37
SGKIM005
01:58
Popup Menu
MARK
Page Change
Mark
Q.MENU
Option
Exit
➩
Music List
Page 2/3
No Marked
Title
Music
SGKIM003
Up Folder
SGKIM001
SGKIM002
00:00/01:34
Up Folder
Navigation
1
Popup Menu
Duration
➩
4395KB 1Kbps
SGKIM003
SGKIM004
Play
ꔉ
Play with Photo
Mark All
Delete
Close
04:45
01:30
02:37
01:58
SGKIM005
Page Change
03:33
MARK
Mark
Q.MENU
Option
Exit
►►Play (During stop): Play the selected music titles.
One playback of a piece of music finishes, the
next selected one will be played. When there
are no selected music titles to play, the next
one in the current folder will be played. If you
go to a different folder and press the OK button, the current music in playback will stop.
►►Play Marked: Play the selected music titles. Once a
music finishes playing, the next selected one will be
played automatically.
►►Stop Play (During playback): Stop the playing music
titles.
►►Play with Photo: Start playing the selected music titles
and then move to the Photo List.
►►Mark All: Mark all music titles in the folder.
►►Unmark All: Deselect all marked music titles.
►►Delete or Delete Marked: Delete the selected music
titles.
►►Close: Close the Pop-Up menu.
Select the target folder or drive.
2
Select the desired photos.
TO USE A USB DEVICE
3
4
Show the Pop-Up menu.
Select the desired PopUp menu.
• Use the P ꕌꕍ button to navigate up/down in
the music page.
• Use MARK button to mark or unmark a
music. When one or more music files are
marked, the marked music title will be played
in sequence. For example, if you want to listen to only one music repeatedly, just mark
the music only and play it. If no music is
marked, all the music in the folder will be
played in sequence.
• Press the BACK button to move to the previous menu screen.
122
■■ If you don't press any button for a while during the playing, the play
information box (as shown in the below) will float as a screen saver.
■■ The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an fixed image
remaining on the screen for a extended period of time.
Music
S003
► 0:27 / 3:67
Q.MENU
Option
! NOTE
►When
►
a music file is played, ♪ is displayed behind the title.
►A
► damaged or corrupted music does not play but displays 00:00 in play time.
►A
► music downloaded from a paid service with copyright protection does not start but displays inappropriate
information in playtime.
►►If you press OK, ꔛ buttons, screen saver is stopped.
►►The PLAY(►), Pause(II), ꕗ, ►►, ◄◄ buttons on the remote control are also available in this mode.
►You
►
can use the ►► button to select the next music and the ◄◄ button to select the previous music.
Using the Music List function, play
No Marked
Duration
Up Folder
00:00/01:34
Up Folder
Navigation
Page 2/3
Title
Music
SG003
Popup Menu
S001
03:33
S002
04:45
S003
01:30
S004
02:37
S005
01:58
Page Change
MARK
Mark
Q.MENU
Option
Choose Options.
Set Audio Play.
Set Audio.
Exit
1
ꕉ Previous
TO USE A USB DEVICE
Music List
Show the PopUp menu.
2
Select Set Audio Play or Set Audio.
123
TO USE A USB DEVICE
►When
►
you select the Set Audio Play,
Set Audio Play.
◄
Repeat
Random
On
►
Off
ꕉ Previous
1
Show the Set Audio Play.
2
Make appropriate adjustments.
• When “Off” is selected in Repeat menu,
replay will stop once the last file in the list
finishes playing. But, when “►►” button is
pressed while the last fine in the list is in
the middle of replay and “Repeat” is in “Off”
position, the first file in the list will be played
and “Repeat” menu will be activated.
►When
►
you select the Set Audio,
Set Audio.
Sound Mode
◄
Standard
►
• Auto Volume
◄
Off
►
◄
Off
►
• Clear Voice II
• Balance
0
TO USE A USB DEVICE
ꕉ Previous
1
Show the Sound Mode, Auto Volume, Clear Voice II, Balance.
2
Make appropriate adjustments. (Refer to p. 85 to 89)
124
MOVIE LIST
You can play movie files on a USB storage device.
The movie list is activated once USB is detected. It is used when playing movie files on TV.
Displays the movies in the USB folder and supports Play.
Allows playback of all movies in the folder and user desired files.
It is a movie list that displays folder information and movie file.
The On Screen Display may be different from your TV. Images are an example to assist with the TV
operation.
TO USE A USB DEVICE
Movie(*.dat / *.mpg / *.mpeg / *.ts / *.trp / *.tp / *.vob/ *.mp4 / *.mkv / *.avi / *.divx) supporting file
Video format :DivX3.11, DivX4.12, DivX5.x, DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid 1.10- beta1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC
Audio format: Dolby Digital, AAC, Mpeg, MP3, LPCM, HE-AAC
Bit rate: within 32 kbps to 320 kbps (MP3)
Subtitle format: *.smi / *.srt / *.sub (MicroDVD, SubViewer1.0/2.0) / *.ass / *.ssa / *.txt (TMPlayer) / *.psb
(PowerDivx).
• Some user-created subtitles may not work properly.
• Some special characters are not supported in subtitles.
• HTML tags are not supported in subtitles.
• Subtitles in languages other than the supported languages are not available.
• Time information in an external subtitle file should be arranged in ascending order to be played.
• The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio
language is changed.
• A damaged movie file may not be played correctly, or some player functions may not be usable.
• Movie files produced with some encoders may not be played correctly.
• If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
• HD videos with a maximum of 1920 x 1080 @ 25/30P or 1280 x 720 @ 50 / 60P are supported, depending on the frame.
• Videos with resolutions higher than 1920 x 1080 @ 25 / 30P or 1280 x 720 @ 50 / 60P may not work
properly depending on the frame.
• Movie files other than the specified types and formats may not work properly.
• Max bitrate of playable movie file is 20 Mbps.
• We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264 / AVC.
• DTS Audio codec is not supported.
• A movie file more than 30GB in file size is not supported for playback.
• A DivX movie file and its subtitle file must be located in the same folder.
• A video file name and its subtitle file name must be identical for it to be displayed.
• Playing a video via a USB connection that doesn’t support high speed may not work properly..
• Files encoded with GMC (Global Motion Compensation) may not be played.
• When you are watching the movie by Movie List function, you can adjust an image by Energy Saving
key on the remote control. User setup for each image mode does not operate.
125
TO USE A USB DEVICE
File
Max
Resolution
Video Decoder
Audio Codec
mpeg, vob
MPEG1, MPEG2
Dolby Digital, MPEG, MP3, LPCM
dat
MPEG1
Dolby Digital, MPEG, MP3, LPCM
ts,trp,tp
MPEG2, H.264 / AVC
Dolby Digital, AAC, MPEG
xtension
name
MPEG4 SP, MPEG4 ASP, Divx 3.11, Dvix 4.12, Dvix 5.x
mp4
Dolby Digital, HE-AAC,
Dvix 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03
AAC, MPEG, MP3, LPCM
Xvid 1.10–beta 1, Xvid 1.10-beta 2, H.264/AVC
1920 x 1080 @ 30p
MPEG 2, MPEG 4 SP, MPEG4 ASP, Divx 3.11, Divx 4,
avi
Dolby Digital, HE-AAC, AAC, MPEG,
Divx 5, Divx 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid
MP3, LPCM
1.03, Xvid 1.10–beta 1, Xvid 1.10–beta 2, H.264/AVC
mkv
H.264 / AVC, MPEG 1, MPEG 2, MPEG 4 SP , MPEG4 ASP
divx
Divx 5, Divx 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03,
Dolby Digital, HE-AAC, AAC, MPEG,
MP3, LPCM
MPEG 2, MPEG 4 SP, MPEG4 ASP, Divx 3.11, Divx 4,
Dolby Digital,HE-AAC,AAC,MPEG,
MP3,LPCM
Xvid 1.10–beta 1, Xvid 1.10–beta 2, H.264 / AVC
Screen Components
2
1
MENU
Select Movie List.
Select USB.
TO USE A USB DEVICE
2
3
Page 2/3
No Marked
1 Moves to upper level folder.
2 Current page/Total pages.
Movie List
3 Total number of marked movie
title.
Title
Movie
SGKIM002
4 Corresponding buttons on the
Up Folder
remote control.
Favorite Music
SGKIM001
640x480, 720KB
1
Up Folder
Navigation
Popup Menu
SGKM002
01:34:15
SGKIM001
01:35:30
SGKIM001
01:30:20
Page Change
4
126
Duration
MARK
Mark
Exit
Movie Selection and PopUp Menu
Movie List
Page 2/3
No Marked
Title
Movie
SGKIM002
Duration
Up Folder
Favorite Music
SGKIM001
640x480, 720KB
Up Folder
Navigation
SGKM002
01:34:15
SGKIM001
01:35:30
SGKIM001
01:30:20
Popup Menu
Page Change
MARK
Mark
Exit
➩
Movie List
Page 2/3
No Marked
Title
Movie
SGKIM002
Duration
1366x768, 125KB
Up Folder
Play
Favorite Music
SGKIM001
1
Close
SGKIM001
Up Folder
Navigation
Delete
SGKM002
640x480, 720KB
Popup Menu
01:34:15
01:35:30
01:30:20
SGKIM001
Page Change
ꔉ
Mark All
MARK
Mark
►►Play: Play the selected movie. Divx Play is executed
while screen changes.
►►Mark All: Mark all Movie in the folder.
►►Unmark All: Deselect all marked movies.
►►Delete or Delete Marked: Delete the selected Movie item.
►►Close: Close the pop-up menu.
Exit
Select the target folder or drive.
2
Select the desired movie title
4
Show the PopUp menu.
Select the desired PopUp menu.
TO USE A USB DEVICE
3
• Use the P ꕌꕍ button to navigation in the
movie page.
• Use MARK button to mark or unmark a
movie. When one or more movie files are
marked, the marked movies will be played in
sequence.
• Press the BACK button to move to the previous menu screen.
! NOTE
►In
► the case of files not supported, a message regarding non-supported file is displayed.
127
TO USE A USB DEVICE
Using the Movie List function, play
Choose Options.
Set Video Play.
Set Video.
Set Audio.
ꕉ Previous
Q.MENU
1
Option
Show the PopUp menu.
2
Select Set Video Play, Set Video or Set Audio.
TO USE A USB DEVICE
128
►When
►
you select the Set Video Play,
◄
Picture Size
Audio Language
Subtitle Language
Full
►
1
Off
. Sync
0
. Position
0
ꕉNormal
Previous
. Size
ꕉ Previous
►►Picture Size: Selects your desired picture format during
movie play.
►►Audio Language & Subtitle Language: Changes the
Language Group of the audio/subtitle during movie play.
►►Sync: Adjusts the time synchronisation of the subtitle
from -10 secs to +10 secs by steps of 0.5 secs during
movie play.
►►Position: Changes the position of the subtitle either
up or down during movie play.
►►Size: Selects your desired Subtitle size during movie
play.
1
Show the Picture Size, Audio Language or Subtitle Language.
2
Make appropriate adjustments.
Support Language
Latin1
English, Spanish, French, German, Italian, Swedish, Finnish, Dutch,
Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic, Welsh,
Irish, Catalan, Valencian
Latin2
Bosnian, Polish, Croatian, Czech, Slovak, Slovenian, Serbian, Hungarian
Latin4
Estonian, Latvian, Lithuanian
Cyrillic
Bulgarian, Macedonian, Russian, Ukrainian, Kazakh
Greek
Greek
Turkish
Turkish
! NOTE
TO USE A USB DEVICE
Subtitle Language
►Only
►
the files saved in ASCII CODE is supported for the external subtitles of the movie.
►Only
►
500 alphabets and 500 numbers are supported for each line of the subtitle.
►Only
►
10,000 of sync blocks can be supported within the subtitle file.
129
TO USE A USB DEVICE
►When
►
you select the Set Video,
Set Video.
Picture Mode
◄
Vivid
►
● Dynamic Contrast
◄
Medium
►
● Noise Reduction
◄
Medium
►
● Backlight
100
● Contrast
100
● Brightness
50
● Colour
50
● Picture Reset
ꕉ Previous
1
Make appropriate adjustments.(Refer to p. 74, 77, 78)
►When
►
you select the Set Audio,
Set Audio.
Sound Mode
◄
Standard
►
• Auto Volume
◄
Off
►
• Clear Voice II
◄
Off
►
• Balance
0
ꕉ Previous
TO USE A USB DEVICE
130
1
Show the Sound Mode, Auto Volume, Clear Voice II, Balance.
2
Make appropriate adjustments. (Refer to p. 85 to 89)
Using the remote control
◄◄ / ►►
When playing,
repeatedly, press the REW(◄◄) button to speed up ◄◄(x2) → ◄◄◄ (x4)
→ ◄◄◄◄(x8) → ◄◄◄◄◄(x16) →◄◄◄◄◄◄(x32) .
repeatedly, press the FF(►►) button to speed up ►►(x2) → ►►► (x4) →
►►►► (x8) → ►►►►►(x16) → ►►►►►►(x32).
■ Pressing these buttons repeatedly increases the fast forward/reverse speed.
During playback, press the Pause (II) button.
■ Still screen is displayed.
■ If no buttons are pressed on the remote control for 10 minutes after pausing, the TV returns to the playback state.
■ Press the Pause (II) button and then use the FF (►►) button for slow motion.
< >
Play(►)
When using the < or > button during playback a cursor indicating the position
can be viewed on the screen.
Press the Play(►) button to return to normal playback.
Press the ENERGY SAVING button repeatedly to increase the brightness of
your screen. (Refer to p. 72)
TO USE A USB DEVICE
131
TO USE A USB DEVICE
DIVX REGISTRATION CODE
Confirm the DivX registration code number of the TV. Using the registration number, movies can be
rented or purchased at www.divx.com/vod.
With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed.
(Only DivX files matched with the registration code of the purchased TV are playable.)
USB
Move
USB
OK
Photo List
Photo List
Music List
Music List
Movie List
DivX
DivX Reg.
Reg. Code
Code
➩
ꔉ
Deactivation
Movie List
DivX
DivX Reg.
Reg. Code
Code
Deactivation
Move
OK
DivX(R) Video On Demand
ꔉ Code is: xxxxxxxxxx
Your registration
To learn more visit www.divx.com/vod.
Close
1
MENU
Select USB.
2
Select DivX Reg. Code.
3
Display DivX Reg. Code.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
TO USE A USB DEVICE
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official
DivX Certified device that plays DivX video. Visit www.divx.com for more information and
software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX
Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the
device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more
about DivX VOD.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under license.”
“Pat. 7,295,673; 7,460,668; 7,515,710; 7,519,274”
! NOTE
►Movie
►
files are supported as follows
Resolution: under 1920x1080 WxH pixels
Frame rate: under 30 frames/sec(1920x1080), under 60 frames/sec(under 1280x720)
►Video
►
Codec: MPEG 1, MPEG 2, MPEG 4, H.264/AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid
1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1, Xvid 1.10-beta2
132
DEACTIVATION
The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web server and are blocked from activating more devices. DivX VOD allowed
the consumer to activate up to 6 devices under one account, but to replace or deactivate any of those
devices, the consumer had to contact DivX Support and request deletion. Now with this added feature,
consumers will be able to deactivate the device themselves and hence better manage their DivX VOD
devices.
USB
Move
USB
OK
Photo List
Photo List
Music List
Music List
Movie List
Deactivation
Deactivation
DivX Reg. Code
DivX(R) Video On Demand
Deactivation
ꔉ
Deactivation
Do you want to deactivate your device?
ꔉ
Yes
1
MENU
OK
Movie List
➩
DivX Reg. Code
Move
No
➩
DivX(R) Video On Demand
This device is deactivated.
Your deactivation code is: xxxxxxxx
To learn more visit www.divx.com/vod.
Close
Select USB.
2
Select Deactivation.
TO USE A USB DEVICE
3
Select Yes.
4
Display Deactivation.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
133
TELETEXT
This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives up-tothe-minute information on news, weather, television programmes, share
prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of
pages which are selected by directly entering the corresponding page
number. TOP and FASTEXT are more modern methods allowing quick
and easy selection of teletext information.
SWITCH ON/OFF
Press the TEXT button to switch to teletext. The initial page or last page
appears on the screen.
Two page numbers, TV station name, date and time are displayed on the
screen headline. The first page number indicates your selection, while the
second shows the current page displayed.
Press the TEXT or EXIT button to switch off teletext. The previous mode
reappears.
SIMPLE TEXT
■■ Page selection
1 Enter the desired page number as a three-digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three-digit number and then re-enter the correct page
number.
2 The P ꕌꕍ button can be used to select the previous or next page.
TOP TEXT
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow
field denotes the next group and the blue field indicates the next block.
■■ Block / group / page selection
TELETEXT
1 With the blue button you can progress from block to block.
2 Use the yellow button to proceed to the next group with automatic overflow to the next block.
3 With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively, the P ꕌ button can be used.
4 The RED button permits you to return to previous selection. Alternatively, the P ꕍ button can be used.
■■ Direct page selection
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the
NUMBER buttons in TOP mode.
134
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the
corresponding coloured button.
■■ Page selection
1 Press the T.OPT button and then use ꕌꕍ button to select ꔻ menu. Display the index page.
2 You can select the pages which are colour coded along the bottom line with corresponding coloured
buttons.
3 AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with
the NUMBER buttons in FASTEXT mode.
4 The P ꕌꕍ button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTION
■■ Press the T. OPT button and then use ꕌꕍ button to select the Text Option menu.
ꔻ Index
Select the each index page.
ꔾ Time
When viewing a TV programme, select this menu to display the time at the top
right hand corner of the screen.
In the teletext mode, press this button to select a sub page number. The sub
page number is displayed at the bottom of the screen. To hold or change the sub
page, press the RED/GREEN, < > or NUMBER buttons.
ꕀ Hold
Text Option
Index
Time
Hold
Reveal
Update
Close
ꔽ Reveal
Select this menu to display concealed information, such as solutions to riddles or puzzles.
ꔼ Update
TELETEXT
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages.
The number of sub pages and the sub page displayed is, usually, shown on the screen below the
time. When this menu is selected the stop symbol is displayed at the top left-hand corner of the
screen and the automatic page change is inactive.
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear
at the top left hand corner of the screen. When the updated page is available then display will change
to the page number. Select this menu again to view the updated teletext page.
135
DIGITAL TELETEXT
*This function works in UK, Ireland only.
The TV gives you access to digital teletext which is greatly improved in various aspects such as text,
graphics etc.
This digital teletext can access special digital teletext services and specific services which broadcast
digital teletext.
You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button.
TELETEXT WITHIN DIGITAL SERVICE
1
Press the numeric or P ꕌꕍ button to select a digital
service which broadcasts digital teletext.
2
Follow the indications on digital teletext and move
onto the next step by pressing TEXT, OK, ꕌꕍ< > ,
RED, GREEN, YELLOW, BLUE or NUMBER buttons
and etc.
3
To change digital teletext service, select a different
service by the numeric or P ꕌꕍ button.
TELETEXT IN DIGITAL SERVICE
DIGITAL TELETEXT
136
1
Press the numeric or P ꕌꕍ button to select a certain
service which broadcasts digital teletext.
2
Press the TEXT or coloured button to switch on teletext.
3
Follow the indications on digital teletext and move
onto the next step by pressing OK, ꕌꕍ< > , RED,
GREEN, YELLOW, BLUE or NUMBER buttons and
so on.
4
Press the TEXT or colour button to switch off digital
teletext and return to TV viewing.
Some services may allow you to access text services
by pressing the RED button.
APPENDIX
TROUBLESHOOTING
The operation does not work normally.
The remote control
doesn’t work
■■ Check to see if there is any object between the product and the remote
control causing obstruction. Ensure you are pointing the remote control
directly at the set.
■■ Ensure that the batteries are installed with correct polarity (+ to +, - to -).
■■ Ensure that the correct remote operating mode is set: TV, VCR, etc.
■■ Install new batteries.
Power is suddenly
turned off
■■ Is the sleep timer set?
■■ Check the power control settings. Power interrupted.
■■ If the TV is switched on and there is no input signal, it will switch off
automatically after 15 minutes to save the power consumption.
■■ When a broken file was played in the USB mode, the TV may turn off.
Please check the file in your usb storage.
■■ Except the screen off mode of the energy saving menu.
The video function does not work.
No picture &No sound
Picture appears slowly
after switching on
No color, poor colour,
or poor picture
or picture shaking
■■ This is normal, the image is muted during the product startup process.
Please contact your service centre, if the picture has not appeared
after five minutes.
■■ Adjust Colour in menu option.
■■ Keep a sufficient distance between the product and the VCR.
■■ Try another channel. The problem may be with the broadcast.
■■ Are the video cables installed properly?
■■ Activate any function to restore the brightness of the picture.
■■ Check for local interference such as an electrical appliance or power
tool.
APPENDIX
Horizontal / vertical bars
■■ Check whether the product is turned on.
■■ Try another channel. The problem may be with the broadcast.
■■ Is the power cord inserted into wall power outlet?
■■ Check your antenna direction and/or location.
■■ Test the wall power outlet, plug another product’s power cord into the
outlet where the product’s power cord was plugged in.
137
APPENDIX
The video function does not work.
Poor reception on
some channels
Lines or streaks
in pictures
No picture
when connecting HDMI
■■ Station or cable product experiencing problems, tune to another station.
■■ Station signal is weak, reorient antenna to receive weaker station.
■■ Check for sources of possible interference.
■■ Check antenna (Change the direction of the antenna).
■■ Check that your HDMI cable is High Speed HDMI Cable.
If the HDMI cables are not High Speed HDMI Cable, flickering or no
screen display can result. Please use the High Speed HDMI Cable.
The audio function does not work.
Picture OK & No sound
APPENDIX
138
■■ Press the
+ or - button.
■■ Sound muted? Press MUTE button.
■■ Try another channel. The problem may be with the broadcast.
■■ Are the audio cables installed properly?
No output from one
of the speakers
■■ Adjust Balance in menu option.
Unusual sound from
inside the product
■■ A change in ambient humidity or temperature may result in an unusual
noise when the product is turned on or off and does not indicate a
problem with the product.
No sound when
connecting HDMI
or USB
■■ Check HDMI cable is High Speed HDMI Cable.
■■ Check USB cable over version 2.0.
■■ If the sound is abnormal in the HDMI, check the audio format in your
external equipments
►►Audio Supported format : Dolby Digital, PCM
There is a problem with PICTURE settings.
When the user changes
the picture settings, the
TV automatically converts
back to the initial settings
after a certain period of
time.
■■ It means that the TV is currently set to Store Demo mode.
To switch to Home use mode you should do the followings:
From the TV Menu, choose OPTION → Choose Mode Setting →
Choose Home use. Now, you have completed switching to the Home
use mode.
Only PC mode applied
No image is displayed.
Power is on, power indictor
is blue but the screen
■■ Adjust brightness and contrast again.
appears extremely dark.
Does the ‘Invalid format’
message appear?
■■ The signal from the PC (Video card) is out of the vertical or horizontal
frequency range of the product.
Adjust the frequency range by referring to the Specifications in this
user’s guide.
Does the ‘Check signal
cable’ message appear?
■■ The signal cable between PC and product is not connected. Check the
signal cable.
■■ Press the ‘INPUT’ button in the remote control to check the input signal.
‘Unknown Product’ message appears when the product is connected.
Did you install the driver?
■■ Install the product driver, which is provided with the product, or download it from the web site. (http://www.lg.com)
■■ See if the plug & play function is supported by referring to the video
card user’s guide.
After-image appears when
the product is turned off.
■■ If you use a fixed image for a long time, the pixels may be damaged
quickly.
Use the screen saver function.
APPENDIX
After-image appears on the product.
139
APPENDIX
Screen color is abnormal.
Screen has poor color resoluion (16_colors).
■■ Set screen color resolution to more than 24 bits (true color)
Select control Pane → Display → Settings → Color Table menu in
Windows.
Screen color is unstable
or mono color.
■■ Check the connection status of the signal cable.
Do back spots appear on
the screen?
■■ Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel.
It is not a malfunction of the LCD.
The screen image looks abnormal.
■■ Adjust the Position menu in OSD.
Is the screen position
wrong?
APPENDIX
140
■■ A See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended resolution in the Control Panel → Display → Setting menu.
Do thin lines appear on
the background screen?
■■ Adjust the Clock menu in OSD.
Horizontal noise appears
or the characters look
blurred.
■■ Adjust the Phase menu in OSD.
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new set.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and
then use it to wipe the screen.
2 Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before
switching on.
Cleaning the Cabinet
■■ To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
■■ Do not to use a wet cloth..
Extended Absence
WARNING
►►If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord
to protect against possible damage from lightning or power surges.
APPENDIX
141
APPENDIX
PRODUCT SPECIFICATIONS
M2080D / M2080DF / M2080DB / M2080DN
508.5 mm Wide (20.0 inch) TFT (Thin Film Transistor)
LCD Panel
Video Signal
Screen Type
Visible diagonal size: 508.5 mm
Pixel Pitch
0.2766 mm (H) x 0.2766 mm (V)
Max. Resolution
1600 x 900 @ 60 Hz
Recommended Resolution
1600 x 900 @ 60 Hz
Horizontal Frequency
30 kHz to 65 kHz
Vertical Frequency
56 Hz to 75 Hz
Synchronization Type
Separate Sync, Digital
TV, D-Sub Analog, SCART, PC Audio In, component, HDMI*2, CVBS
Input Connector
Rated Voltage
Power
Power Consumption
AC/DC Adapter
Tilt
LCD (Liquid Crystal Display) Panel
19 V
2.0 A
On Mode 32 W (typ.)
Off Mode ≤ 1 W
Manufacturer: LITE-ON, Model PA-1650-68
Tilt Range
-5° to 10°
M2080D
476.4 mm x 376.1 mm x 193.8 mm (18.75 inch x 14.81 inch x 7.62 inch)
3.5 kg ( 7.12 lb)
M2080DF
476.4 mm x 387.8 mm x 193.9 mm (18.75 inch x 15.26 inch x 7.63 inch)
Dimensions (Width x Height x Depth)
3.7 kg ( 8.16 lb)
M2080DB
Weight
476.4 mm x 389.4 mm x 194.4 mm (18.75 inch x 15.33 inch x 7.65 inch)
3.5 kg ( 7.12 lb)
M2080DN
476.4 mm x 310.5 mm x 56.1 mm (18.75 inch x 12.22 inch x 2.21 inch)
2.7 kg ( 5.95 lb)
APPENDIX
142
Environmental
conditions
Operating Temperature
10 °C to 35 °C
Operating Humidity
20 % to 80 %
Storage Temperature
-10 °C to 60 °C
Storage Humidity
5 % to 90 %
■■ The specifications shown above may be changed without prior notice for quality improvement.
M2280D / M2280DF / M2280DB / M2280DN
546.86 mm Wide (21.53 inch) TFT (Thin Film Transistor)
LCD Panel
Video Signal
Screen Type
Visible diagonal size: 546.86 mm
Pixel Pitch
0.248 mm (H) x 0.248 mm (V)
Max. Resolution
1920 x 1080 @ 60 Hz
Recommended Resolution
1920 x 1080 @ 60 Hz
Horizontal Frequency
30 kHz to 83 kHz
Vertical Frequency
56 Hz to 75 Hz
Synchronization Type
Separate Sync, Digital
TV, D-Sub Analog, SCART, PC Audio In, component, HDMI*2, CVBS
Input Connector
Rated Voltage
Power
Power Consumption
AC/DC Adapter
Tilt
LCD (Liquid Crystal Display) Panel
19 V
2.2 A
On Mode 35 W (typ.)
Off Mode ≤ 1 W
Manufacturer: LITE-ON, Model PA-1650-68
Tilt Range
-5° to 10°
M2280D
509.6 mm x 396.2 mm x 193.8 mm (20.06 inch x 15.6 inch x 7.63 inch)
3.7 kg (8.16 lb)
M2280DF
509.6 mm x 407.3 mm x 193.9 mm (20.06 inch x 16.03 inch x 7.63 inch)
Dimensions (Width x Height x Depth)
3.9 kg ( 8.6 lb)
M2280DB
Weight
509.6 mm x 409.6 mm x 194.4 mm (20.06 inch x 16.12 inch x 7.65 inch)
3.7 kg ( 8.16 lb)
M2280DN
509.6 mm x 330.5 mm x 53.6 mm (20.06 inch x 13 inch x 2.11 inch)
2.9 kg ( 6.4 lb)
conditions
10 °C to 35 °C
Operating Humidity
20 % to 80 %
Storage Temperature
-10 °C to 60 °C
Storage Humidity
5 % to 90 %
■■ The specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
Environmental
Operating Temperature
143
APPENDIX
M2380D / M2380DF/ M2380DB / M2380DN
584.2 mm Wide (23 inch) TFT (Thin Film Transistor)
LCD Panel
Video Signal
Screen Type
Visible diagonal size: 584.2 mm
Pixel Pitch
0.265 mm (H) x 0.265 mm (V)
Max. Resolution
1920 x 1080 @ 60 Hz
Recommended Resolution
1920 x 1080 @ 60 Hz
Horizontal Frequency
30 kHz to 83 kHz
Vertical Frequency
56 Hz to 75 Hz
Synchronization Type
Separate Sync, Digital
TV, D-Sub Analog, SCART, PC Audio In, component, HDMI*2, CVBS
Input Connector
Rated Voltage
Power
Power Consumption
AC/DC Adapter
Tilt
LCD (Liquid Crystal Display) Panel
19 V
2.4 A
On Mode 40 W (typ.)
Off Mode ≤ 1 W
Manufacturer: LITE-ON, Model PA-1650-68
Tilt Range
-5° to 10°
M2380D
547 mm x 415.7 mm x 193.8 mm (21.53 inch x 16.37 inch x 7.63 inch)
4.2 kg ( 9.26 lb)
M2380DF
547 mm x 427.9 mm x 193.9 mm (21.53 inch x 16.85 inch x 7.6 inch)
Dimensions (Width x Height x Depth)
4.4 kg ( 9.7 lb)
Weight
M2380DB
547 mm x 429.1 mm x 194.4 mm (21.53 inch x 16.89 inch x 7.65 inch)
4.2 kg ( 9.26 lb)
M2380DN
547 mm x 349.6 mm x 57.8 m (21.53 inch x 13.76 inch x 2.27 inch)
3.4 kg ( 7.5 lb)
APPENDIX
Environmental
conditions
Operating Temperature
10 °C to 35 °C
Operating Humidity
20 % to 80 %
Storage Temperature
Storage Humidity
-10 °C to 60 °C
5 % to 90 %
■■ The specifications shown above may be changed without prior notice for quality improvement.
144
M2780D / M2780DF / M2780DN
685.8 mm Wide (27 inch) TFT (Thin Film Transistor)
LCD Panel
Video Signal
Screen Type
Visible diagonal size: 685.8 mm
Pixel Pitch
0.3114 mm (H) x 0.3114 mm (V)
Max. Resolution
1920 x 1080 @ 60 Hz
Recommended Resolution
1920 x 1080 @ 60 Hz
Horizontal Frequency
30 kHz to 83 kHz
Vertical Frequency
56 Hz to 75 Hz
Synchronization Type
Separate Sync, Digital
TV, D-Sub Analog, SCART, PC Audio In, component, HDMI*2, CVBS
Input Connector
Rated Voltage
Power
Power Consumption
AC/DC Adapter
Tilt
LCD (Liquid Crystal Display) Panel
19 V
2.8 A
On Mode 47 W (typ.)
Off Mode ≤ 1 W
Manufacturer: LITE-ON, Model PA-1650-68
Tilt Range
-5° to 10°
M2780D
644 mm x 480.6 mm x 222.8 mm (23.53 inch x 18.92 inch x 8.77 inch)
5.8 kg ( 12.79 lb)
Dimensions (Width x Height x Depth)
Weight
M2780DF
644 mm x 493.6 mm x 221.7 mm (23.53 inch x 19.43 inch x 8.72 inch)
6.1 kg ( 13.45 lb)
M2780DN
644 mm x 407.8 mm x 57.6 mm ( 23.53 inch x 16.05 inch x 2.27 inch)
4.8 kg ( 10.58 lb)
Environmental
conditions
Operating Temperature
10 °C to 35 °C
Operating Humidity
20 % to 80 %
Storage Temperature
-10 °C to 60 °C
5 % to 90 %
■■ The specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
Storage Humidity
145
APPENDIX
IR CODES
•This feature is not available for all models.
Code (Hexa)
Note
95
Energy Saving
R/C BUTTON
08
POWER
R/C BUTTON (POWER ON/OFF)
50
TV / PC
R/C BUTTON
0B
INPUT
R/C BUTTON
79
RATIO
R/C BUTTON
F0
TV/RAD
R/C BUTTON
45
Q.MENU
R/C BUTTON
43
MENU
R/C BUTTON
AB
GUIDE
R/C BUTTON
40
Up (ꕌ)
R/C BUTTON
41
Down (ꕍ)
R/C BUTTON
07
Left (<)
R/C BUTTON
06
Right (>)
R/C BUTTON
44
OK(ꔉ )
R/C BUTTON
28
BACK
R/C BUTTON
5B
EXIT
꘍
R/C BUTTON
AA
R/C BUTTON
02
(+)
R/C BUTTON
03
(-)
R/C BUTTON
1E
FAV ( MARK )
R/C BUTTON
09
R/C BUTTON
00
MUTE
P (ꕌ)
01
P (ꕍ)
R/C BUTTON
10 to 19
APPENDIX
146
Function
R/C BUTTON
Number Key 0 to 9
R/C BUTTON
53
LIST
R/C BUTTON
1A
Q.VIEW
R/C BUTTON
72
RED Key
R/C BUTTON
71
GREEN Key
R/C BUTTON
63
YELLOW Key
R/C BUTTON
61
BLUE Key
R/C BUTTON
20
TEXT
R/C BUTTON
21
T.OPT (T.Option)
R/C BUTTON
39
SUBTITLE
R/C BUTTON
99
Auto Config.
R/C BUTTON
B1
▀
R/C BUTTON
B0
►
ll
R/C BUTTON
BA
8F
◄◄
R/C BUTTON
8E
►►
R/C BUTTON
R/C BUTTON
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an
A/V control system) to control the product’s functions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
Note: RS-232C connection cables are not supplied
with the product.
Type of Connector; D-Sub 9-Pin Male
No.
1
2
3
4
5
6
7
8
9
Pin Name
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
1
5
6
9
RS-232C Configurations
3-Wire Configurations(Not standard)
7-Wire Configurations (Standard RS-232C cable)
RXD TXD
GND
DTR
DSR
RTS
CTS
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
APPENDIX
PC
147
APPENDIX
Set ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’. ► p.153
OPTION
Move
OPTION
OK
: English
Menu Language
: English
Audio Language
: English
Audio Language
: English
➩
Subtitle Language : English
Disabled Assistance
Country : ­- -
Set
SetID
ID
Power Indicator
Disabled Assistance
ꔉ
:On
Set
SetID
ID
Power Indicator
▼
2
3
APPENDIX
148
MENU
: ­- -
Input Label
::11
OK
Subtitle Language : English
Country Input Label
1
Move
Menu Language
::11
:On
◄
ꔉ
1
►
Close
▼
Select OPTION.
Select Set ID.
Adjust Set ID to choose the desired TV ID number.
The adjustment range of SET ID is 1 to 99.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
Communication Parameters
■■ Baud rate: 9600 bps (UART)
■■ Data length: 8 bits
■■ Parity : None
■■ Stop bit: 1 bit
■■ Communication code: ASCII code
■■ Use a crossed (reverse) cable.
Transmission / Receiving Protocol
Transmission
Command Reference List
COMMAND COMMAND
1
2
DATA
(Hexadecimal)
01. Power
k
a
00 to 01
02. Aspect Ratio
k
c
Refer to p. 150
03. Screen Mute
k
d
00 to 01
04. Volume Mute
k
e
00 to 01
05. Volume Control
k
f
00 to 64
06. Contrast
k
g
00 to 64
07. Brightness
k
h
00 to 64
08. Colour
k
i
00 to 64
09. Tint
k
j
00 to 64
10. Sharpness
k
k
00 to 64
11. OSD Select
k
l
00 to 01
12. Remote control lock mode
k
m
00 to 01
13. Treble
k
r
00 to 64
14. Bass
k
s
00 to 64
15. Balance
k
t
00 to 64
16. Colour Temperature
x
u
00 to 64
17. Energy Saving
j
q
00 to 05
18. Auto Configuration
j
u
01
19. Tune Command
m
a
Refer to p. 152
20. Programme Add/Skip
m
b
00 to 01
21. Key
m
c
Key Code
22. Back Light
m
g
00 to 64
23. Input select (Main)
x
b
Refer to p. 153
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1] : First command to control the TV.
(j, k, m or x)
* [Command 2] : Second command to control the TV.
: You can adjust the set ID to choose
* [Set ID]
desired monitor ID number in option
menu. Adjustment range is 1 to 99.
When selecting Set ID ‘0’, every connected set is controlled.
Set ID is indicated as decimal (1 to 99) on
menu and as Hexa decimal (0x0 to 0x63)
on transmission/receiving protocol.
: To transmit command data.
* [DATA] Transmit ‘FF’ data to read status of command.
: Carriage Return
* [Cr] ASCII code ‘0x0D’
: ASCII code ‘space (0x20)’
* [ ]
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based
on this format when receiving normal data. At this
time, if the data is data read mode, it indicates present status data. If the data is data write mode, it
returns the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
APPENDIX
* When setting the 17 to 24, a menu does not appear on * The set transmits ACK (acknowledgement) based
on this format when receiving abnormal data from
screen.
* Note : During USB operations such as Dvix or EMF, all non-viable functions or communication errors.
commands except Power(ka) and Key(mc) are not exeData00: Illegal Code
cuted and treated as NG.
149
APPENDIX
01. Power (Command: k a)
►► To control Power On/Off of the set.
Transmission
03. Screen Mute (Command: k d)
[k][a][ ][Set ID][ ][Data][Cr]
[k][d][ ][Set ID][ ][Data][Cr]
Data00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
Ack
Data00 : Power Off
Ack
01 : Power On
[a][ ][Set ID][ ][OK/NG][Data][x]
►► To show Power On/Off.
Transmission
►► To select screen mute on/off.
Transmission
[d][ ][Set ID][ ][OK/NG][Data][x]
[k][a][ ][Set ID][ ][FF][Cr]
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
* Similarly, if other functions transmit ‘0xFF’ data
based on this format, Acknowledgement data feed
back presents status about each function.
* OK Ack., Error Ack. and other message may display on the screen when TV is power On.
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
04. Volume Mute (Command: k e)
►► To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
02. Aspect Ratio (Command: k c) (Main Picture Size)
►► To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen (4:3)
02 : Wide screen (16:9)
04 : Zoom
06 : Original
Ack
[e][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control (Command: k f)
07 : 14:9
09 : Just Scan
0B : Full Wide
10to 1F : Cinema Zoom 1to 16
[c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50 Hz /
60 Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60 Hz),
Component( 720p, 1080i, 1080p 50 Hz / 60 Hz)
mode, Just Scan is available.
* Full Wide is supported only for Analogue, AV1, 2.
APPENDIX
150
Data00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack
►► To adjust volume.
You can also adjust volume with the VOLUME buttons on remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 153.
Ack
[f][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 153.
Ack
[g][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
►► To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 153.
Ack
11. OSD Select (Command: k l)
►► To select OSD (On Screen Display) on/off when controlling remotely.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
Ack
01 : OSD on
[h][ ][Set ID][ ][OK/NG][Data][x]
[l][ ][Set ID][ ][OK/NG][Data][x]
08. Colour (Command: k i)
►► To adjust the screen colour. (Except PC mode)
You can also adjust colour in the PICTURE menu.
Transmission
12. Remote control lock mode (Command: k m)
[k][i][ ][Set ID][ ][Data][Cr]
[k][m][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 153.
Ack
Data00 : Lock off
Ack
[i][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
►► To adjust the screen tint. (Except PC mode)
You can also adjust tint in the PICTURE menu.
►► To lock the front panel controls on the monitor and
remote control.
Transmission
01 : Lock on
[m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this
mode.
When main power is on/off, external control lock is
released.
* Local Power Key will work properly.
13. Treble (Command: k r)
Transmission
►► To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
[k][r][ ][Set ID][ ][Data][Cr]
DataRed : 00 to Green : 64
* Refer to ‘Real data mapping 1’. See page 153.
Ack
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 153.
[j][ ][Set ID][ ][OK/NG][Data][x]
Ack
[r][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
►► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
14. Bass (Command: k s)
[k][k][ ][Set ID][ ][Data][Cr]
[k][s][ ][Set ID][ ][Data][Cr]
►► To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 153.
[k][ ][Set ID][ ][OK/NG][Data][x]
Ack
APPENDIX
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 153.
Ack
[s][ ][Set ID][ ][OK/NG][Data][x]
151
APPENDIX
15. Balance (Command: k t)
18. Auto Configure(Command: j u)
►► To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission
►► To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
[j][u][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 153.
Ack
Data01: To set
Ack
[t][ ][Set ID][ ][OK/NG][Data][x]
16. Colour Temperature (Command: x u)
19.Tune Command (Command: m a)
►► To adjust colour temperature. You can also adjust Colour
Temperature in the PICTURE menu.
Transmission
►► Select channel to following physical number.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data00 :High channel data
Data01 :Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 8A (18AH),
DTV No. 0 -> Don’t care
Data02 :0x00 : Analogue Main
0x10 : DTV Main
0x20 : Radio
Channel data range
Analogue - Min: 00 to Max: 63 (0 to 99)
Digital - Min: 00 to Max: 3E7 (0 to 999)
(Except For Sweden, Finland, Norway, Denmark,
Ireland)
Digital - Min: 00 to Max: 270F (0 to 9999)
(Only Sweden, Finland, Norway, Denmark, Ireland)
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 153.
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
17. Energy Saving (Command: j q)
►►To reduce the power consumption of the TV. You
can also adjust Energy Saving in OPTION menu.
Transmission
Power Saving
Function
7
6
5
4
0
0
0
0
0
0
0
0
0
0
0
0
0
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
[j][q][ ][Set ID][ ][Data][Cr]
APPENDIX
152
[u][ ][Set ID][ ][OK/NG][Data][x]
DataMin: 00 to Max: 7DH
Level
Description
3
2
1
0
Low Power
0
0
0
0
Off
0
Low Power
0
0
0
1
Minimum
0
0
Low Power
0
0
1
0
Medium
0
0
Low Power
0
0
1
1
Maximum
0
0
Low Power
0
1
0
1
Screen Off
Ack
[q][ ][Set ID][ ][OK/NG][Data][x]
20. Programme Add/Skip(Command: m b)
►► To set skip status for the current Programme.
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip
01 : Add
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
* Real data mapping 1
00 : Step 0
Tint
Step 0 : R50
A:
Step 10 (Set ID 10)
F:
10 :
Step 15 (Set ID 15)
Step 16 (Set ID 16)
Step 49 : R1
Step 50 : 0
Step 51 : G1
64 :
Step 100
Step 100 : G50
6E : Step 110
73 :
74 :
Step 115
Step 116
CF : Step 199
FE : Step 254
FF : Step 255
Balance
Step 0 : L50
Step 49 : L1
Step 50 : 0
Step 51 : R1
Step 100 : R50
Colour Temperature
Step 0 : W50
22. Back Light (Command: m g)
►► To Control the back light.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data: data Min: 00 to Max: 64
Ack
[g][ ][Set ID][ ][OK/NG][Data][x]
23. Input select (Command: x b)
(Main Picture Input)
►► To select input source for main picture.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
DataStructure
Data
00: DTV
40: Component
10: Analogue
60: RGB
20: AV
90: HDMI
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
Step 49 : W1
Step 50 : 0
Step 51 : C1
Step 100 : C50
21. Key(Command: m c)
►► To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
DataKey code - Refer to page 148.
Ack
APPENDIX
[c][ ][Set ID][ ][OK/NG][Data][x]
153
UK Only
Make sure to read the Safety Precautions before
using the product.
Keep the Owner’s Manual (CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
Download PDF

advertising