LG CM6520 Owner's manual

LG CM6520 Owner's manual
OWNER’S MANUAL
Mini Hi-Fi System
Please read this manual carefully before operating
your set and retain it for future reference.
CM6520 (CM6520, CMS6520F/W)
CM6520-AP_DNGAFLK_ENG.indd 1
2012-07-26
1:57:53
1
Getting Started
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
T his lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
T he exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CM6520-AP_DNGAFLK_ENG.indd 2
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
2012-07-26
1:57:54
Getting Started
This device is equipped with a portable battery or
accumulator.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot
use it on LG players.
(Mastered/Live File System : Disc format system for
Windows Vista)
CM6520-AP_DNGAFLK_ENG.indd 3
In NIGERIA
POWER: This unit operates on a mains supply of 200240V~, 50/60Hz.
WIRING: This unit is supplied with a BS 1363 approved
main plug. When replacing the fuse, always use of the
same rating approved to BS 1362. Never use this plug
with the fuse cover omitted. To obtain a replacement
fuse cover contact your dealer. If the type of plug
supplied is not suitable for the mains sockets in your
home, then the plug should be removed and a suitable type fitted. Please refer to the wiring instructions
below:
WARNING: A mains plug removed from the mains
lead of this unit must be destroyed. A mains plug
with bared wires is hazardous if inserted in a mains
socket. Do not connect either wire to the earth pin,
marked with the letter E or with the earth symbol or
coloured green or green and yellow. If any other plug is
fitted, use same rating of fuse in the plug.
IMPORTANT: The wires in this mains lead are coloured
in accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours
of the wires in the mains lead of this unit may not
correspond with the coloured marking identifying the
terminals in your plug, proceed as follows: The wire
which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured
black. The wire which is coloured brown must be connected to the terminal which is marked with the letter
L or coloured red.
2012-07-26
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
3
1:57:54
4
Table of Contents
Table of Contents
1
Getting Started
2
Safety Information
6
Unique Features
6Accesories
7
Playable file Requirement
7
– MP3/WMA music file requirement
7
– Compatible USB Devices
7
– USB device requirement
8
Remote control
9
Front panel
11 Rear panel
2Connecting
12
12
13
13
13
13
14
14
Connecting to speakers
– Attaching the speakers to the unit
Optional Equipment Connection
– AUX IN Connection
– PORT. IN Connection
– AUDIO OUT connection
– USB Connection
– Antenna Connection
CM6520-AP_DNGAFLK_ENG.indd 4
3Operating
15
15
16
Basic Operations
– CD/USB Operations
– Selecting a folder and a MP3/WMA
file
16 – Deleting a MP3/WMA file
16 Other Operations
16 – Programmed Playback
16 – Turn off the sound temporarily
17 – AUTO DJ playback
17 – Displaying file information (ID3 TAG )
17 – DEMO
18 – VOCAL FADER
18 – Using Microphone
18 Radio Operations
18 – Listening to the radio
19 – Presetting the Radio Stations
19 – Deleting all the saved stations
19 – Improving poor FM reception
19 Sound adjustment
19 – Setting the surround mode
20 – Setting the USER EQ
20 Setting the Clock
20 – Using your player as an alarm clock
21 – Sleep Timer Setting
21 – Dimmer
21 Advanced Operations
21 – Playing the iPod/iPhone
22 – Compatible iPod/iPhone
23 – Listening to music from your portable
player or external device
23 – Changing the lighting effect
23 – Recording to USB
23 – To select recording bit rate and speed
24 – Dubbing USB to USB
2012-07-26
1:57:54
Table of Contents
5
4Troubleshooting
25Troubleshooting
25 – General
1
5Appendix
26 Trademarks and Licenses
27 General specifications
28 Speaker specifications
29Maintenance
29 – Notes on Discs
29 – Handling the Unit
2
3
4
5
CM6520-AP_DNGAFLK_ENG.indd 5
2012-07-26
1:57:54
6
Getting Started
Unique Features
1
Portable In
Accesories
Please check and identify the supplied accessories.
Getting Started
Listens to music from your portable device. (MP3,
Notebook, etc)
USB Direct Recording
Records music to your USB device.
FM Antenna (1)
AM Antenna (1)
Remote Control (1)
Batteries (2)
Beat lighting
Listens to music with special lighting effect.
CM6520-AP_DNGAFLK_ENG.indd 6
2012-07-26
1:57:54
Getting Started
7
USB device requirement
MP3/WMA music file
requirement
yy Do not extract the USB device while in operation.
MP3/WMA file compatibility with this unit is limited
as follows :
yy To prevent data loss, back up all data.
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy Maximum files : Under 999
yy File extensions : “.mp3”/“.wma”
yy CD-ROM file format : ISO 9660/JOLIET
yy We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
yy Devices which require additional program
installation when you have connected it to a
computer, are not supported.
yy For a large capacity USB, it may take longer than
a few minute to be searched.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
1
Getting Started
Playable file
Requirement
yy Using NTFS file system is not supported.
(Only FAT(16/32) file system is supported.)
yy This unit is not supported when the total
number of files is 1 000 or more.
yy External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yy USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
Compatible USB Devices
yy MP3 Player : Flash type MP3 player.
yy USB Flash Drive :
Devices that support USB 2.0 or USB 1.1.
yy The USB function of this unit does not support
all USB devices.
CM6520-AP_DNGAFLK_ENG.indd 7
2012-07-26
1:57:55
8
Getting Started
Remote control
• • • • • • a • • • • • • 1
Getting Started
1 (POWER) : Switches the unit
ON or OFF.
B (OPEN/CLOSE) : Opens and
closes the disc tray.
PRESET.FOLDER W/S :
-- Searches for a folder of MP3/
WMA files. When a CD/USB
containing MP3/WMA files in
several folders is being played,
press PRESET.FOLDER W/S
to select the folder you want to
play.
-- Chooses a preset number for a
radio station.
FUNCTION : Selects the function
and input source.
C/V (Skip/Search) :
-- Skips Fast backward or Forward.
-- Searches for a section within a
track/file.
Z ENTER :
-- Stops playback or recording.
-- Cancels DELETE function.
-- Chooses an item on IPOD mode.
d/M (Play/Pause) :
-- Starts or pauses playback.
-- Selects STEREO/MONO.
SOUND EFFECT : Chooses sound
impressions.
VOL +/- : Adjusts speaker volume.
AUTO DJ : Selects the AUTO DJ
mode. (For more information refer
to the page 17)
• • • • • • b • • • • • • DELETE : Deletes MP3/WMA files.
PROGRAM/MEMORY :
• • • • • • c • • • • • • -- Stores radio stations.
0 to 9 numerical buttons : Selects
numbered tracks, files, or preset
number.
MUTE @ : Mutes the sound.
-- Creates a playlist you want to
listen to.
USB REC : USB direct recording.
DISC/USB SKIP : Chooses a
desired CD or USB.
Battery Installation
TUNING-/+ : Selects the radio
stations.
REPEAT (MENU) :
-- Listens to your tracks/files
repeatedly or randomly.
-- Moves to the previous menu on
IPOD mode.
INFO : Sees informations about
your music. An MP3 file often
come with ID3 tag. The tag gives
the Title, Artist, Album or Time
information.
SLEEP: Sets the system to turn off
automatically at a specified time.
(Dimmer : The display window will
be darkened by half.)
• • • • • • d • • • • • • Remove the battery cover on the
rear of the Remote Control, and
insert two (size AAA) batteries
with 4 and 5 matched correctly.
CM6520-AP_DNGAFLK_ENG.indd 8
: The button is not available for
any function.
2012-07-26
1:57:55
Getting Started
9
Front panel
1
Getting Started
CM6520-AP_DNGAFLK_ENG.indd 9
2012-07-26
1:57:55
10
1
Getting Started
Getting Started
a iPod DOCKING SYSTEM
l LG EQ
b Display window
Chooses sound impressions.
c 1/!(Power)
AUTO DJ
Selects the AUTO DJ mode. (For more
informaion refer to the page 17)
BASS BLAST
Reinforces the treble, bass or surround effect.
d TIMER
With the TIMER function you can turn CD, USB
play and TUNER reception on or off at a desired
time.
CLOCK
For setting the clock and checking the time.
m SET
Confirms the setting.
e CD/USB
Selects the CD or USB function.
TUNER
Selects the TUNER function.
n SOUND EFFECT
Chooses sound impressions.
iPod/AUX
Selects the iPod or AUX function.
DEMO
Show demo.
PORT. IN
Selects the PORT. IN function.
f VOLUME
Adjusts speaker volume.
g DISC/USB SKIP
Chooses a desired CD or USB.
DISC 1/DISC 2/DISC 3
You can directly select a desired CD.
OPEN/CLOSE
h Disc tray
i PORT. IN jack
j FILE SEARCH
Moves to the another file/track or you can
select the tuning range.
FOLDER
Moves to folder and file selection mode.
DELETE
Deletes MP3/WMA files.
k Remote control sensor
CM6520-AP_DNGAFLK_ENG.indd 10
USER EQ
Controls sound register.
LIGHT EFFECT
Changes lighting effects.
VOCAL FADER
You can enjoy the function as karaoke, by
reducing singer vocal of music in the various
sources.
o MIC VOL.
p USB Ports
You can play or recoding sound files by
connecting the USB device.
REC. TO USB 2
Recoding to USB.
q MIC jack
rI
Stops playback or cancel.
sT ST. /MONO
Starts or pauses playback. Selects Mono/Stereo.
tY
Prev./Scan
uU
Next/Scan
2012-07-26
1:57:55
Getting Started
11
Rear panel
1
Getting Started
a Cooling fan
c AUDIO OUT connectors
b Speaker terminal
d ANTENNA (FM, AM)
e AUX IN connectors
f Power cord
CM6520-AP_DNGAFLK_ENG.indd 11
2012-07-26
1:57:55
12
Connecting
>>Caution
Connecting to
speakers
Attaching the speakers to the
unit
2
Connecting
To connect the cable to the unit, press each plastic
finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad.
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
Color
Speaker
Position
Orange
Sub woofer
Any of position
Red
Front
Front right
White
Front
Front left
CM6520-AP_DNGAFLK_ENG.indd 12
yy Be careful to make sure children not to put
their hands or any objects into the *speaker
duct.
*Speaker duct: A hole for plentiful bass
sound on speaker cabinet (enclosure).
yy The speakers contain magnet parts, so color
irregularity may occur on the TV screen or
PC monitor screen. Please use the speakers
far away from either TV screen or PC
monitor.
yy Make sure to install the speaker with other
people in order to prevent it from falling
and causing injuries to the installer.
2012-07-26
1:57:56
Connecting
Optional Equipment
Connection
13
PORT. IN Connection
Connect an output (earphone or line out) of
portable device (MP3 or PMP etc) to the
PORT. IN connector.
AUX IN Connection
Connect an output of auxiliary device(Camcoder,
TV, Player, etc) to the AUX IN (L/R) connector.
2
Connecting
If your device has only one output for audio(mono),
connect it to the left (white) audio jack on the unit.
AUDIO OUT connection
TV
You can connect another device.
Connect the left and right AUDIO OUT jacks of the
unit to the audio left and right jacks on another
device using the audio cables.
CM6520-AP_DNGAFLK_ENG.indd 13
2012-07-26
1:57:56
14
Connecting
USB Connection
Antenna Connection
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
Connect the supplied FM/AM antenna for listening
to the radio.
Connect the AM loop antenna to the AM antenna
connector. (A)
Connect the FM wire antenna to the FM antenna
connector. (F)
2
Connecting
,,Note
yy Removing the USB Device from the unit
1. Choose a different function/mode or
press Z ENTER on the remote control
or I on the unit twice in a row.
2. Remove the USB device from the unit.
yy You can only recharge your iPod through
USB port. To listen to music on iPod, refer to
the page 22.
,,Note
yy To prevent noise pickup, keep the AM Loop
antenna away from the unit and other
components.
yy Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep
it horizontal.
CM6520-AP_DNGAFLK_ENG.indd 14
2012-07-26
1:57:57
3Operating
Operating
Basic Operations
CD/USB Operations
1. Insert the disc by pressing B (OPEN/CLOSE) or
connect the USB device to the USB port.
2. Select the CD or USB function by pressing
FUNCTION on the remote control or CD/USB
on the unit.
3. Select the disc by pressing DISC/USB SKIP,
DISC1, DISC 2, DISC 3 on the unit or
DISC/USB SKIP on the remote control.
15
,,Note
The display changes in the following order,
USB
MP3/WMA CD
Audio CD
REPEAT TRK
REPEAT TRK
REPEAT TRK
REPEAT DIR
REPEAT DIR
-
-
REPEAT CD
REPEAT CD
REPEAT ALL
REPEAT ALL
REPEAT ALL
RANDOM
RANDOM
RANDOM
OFF
OFF
OFF
To
Do this
Press Z ENTER on the remote
Stop
control or I on the unit.
Press d/M on the remote control
Playback
or T ST. /MONO on the unit.
Press d/M on the remote control
Pause
or T ST. /MONO on the unit.
Press C/V on the remote
Searching
control or Y/U on the unit
for a section
during playback and release it at
within a track
the point you want to listen to.
Selecting Press 0 to 9 numerical buttons on
files or tracks the remote control to go to the
directly
desired file or track directly.
During playback, press or rotate;
3
Operating
(1) to go to the next track/file:
- On the remote control: V
- On the unit: FILE SEARCH or
U
Skipping to
the next/
previous (2) to go back to the previous track/
track/file file or to return to the beginning of
current track/file:
- On the remote control: C
- On the unit: FILE SEARCH or
Y
Press REPEAT(MENU) on the
Playing
remote control repeatedly. Refer
repeatedly or
to the note for details about the
randomly
display change.
CM6520-AP_DNGAFLK_ENG.indd 15
2012-07-26
1:57:57
16
Operating
Selecting a folder and a MP3/
WMA file
Other Operations
On the unit
Programmed Playback
1.Press FOLDER and rotate FILE SEARCH until a
desired folder appears.
The program function enables you to store your
favorite files from any disc or USB device.
2.Press FILE SEARCH or T ST. /MONO.
A program can contain 20 tracks/files.
3. If you want to move to the upper folder, press
FOLDER.
1. Insert a CD or USB and wait for it to be ordered.
4.Rotate FILE SEARCH until a desired file appears.
Press T ST. /MONO to play it.
3
On the remote control
Operating
1.Press PRESET.FOLDER W/S repeatedly until a
desired folder appears.
2.Press d/M to play it. The first file of folder will
play.
Deleting a MP3/WMA file
You can delete file, folder or format by pressing
DELETE. (USB only)
1.Press DELETE repeatedly during selecting
the MP3/WMA file. This function is supported
only in stop status. The display changes in the
following order.
- DELETE? : Deletes file
- DEL FOLDER : Deletes folder
- FORMAT? : Formats USB
2. To delete file/folder or format, press d/M on the
remote control or press T ST. /MONO on the
unit.
2.Press PROGRAM/MEMORY on the remote
control in stop status.
3. Press or rotate to select a track;
- On the remote control : C/V
- On the unit : FILE SEARCH or Y/U
4.Press PROGRAM/MEMORY again to save and
select a next track.
5.Press d/M to play the programmed music files.
6. To clear your selection, press Z ENTER twice.
,,Note
The programs are also cleared when the disc
or USB device is removed, the unit is powered
off or the function is switched to others.
Turn off the sound temporarily
Press MUTE @ to mute your unit.
You can mute your unit, for example, to answer
the telephone, the mute icon "Q” is blinked in the
display window.
3. If you want to exit the current mode, press
Z ENTER on the remote control or press I on
the unit.
>>Caution
o not extract the USB device during
yy D
operation.(play, delete, etc.)
egular back up is recommended to
yy R
prevent data loss.
yy T he delete function may not be supported
according to the USB status. (lock, etc.)
CM6520-AP_DNGAFLK_ENG.indd 16
2012-07-26
1:57:57
Operating
AUTO DJ playback
Auto DJ blends the end of one song into the
beginning of another for seamless playback. It
equalizes volume across tracks for uninterrupted
playback.
Press AUTO DJ on the remote control or unit
repeatedly, the display changes as followings.
RANDOM (AUTO DJ RANDOM) -> REPEAT DISC/ALL
(AUTO DJ SEQUENTIAL) -> (AUTO DJ OFF)
Mode
OFF
Display
Window
(AUTO DJ OFF)
Description
The music is
played randomly
on this mode.
REPEAT
REPEAT DISC/
ALL
(AUTO DJ
SEQUENTIAL)
The music is
played repeatedly
on this mode.
Displaying file information
(ID3 TAG )
While playing an MP3 file containing file
information, you can display the information by
pressing INFO.
DEMO
In the power off state, it demonstrates the function
on display window by pressing DEMO. To cancel
the DEMO, press it again.
,,Note
hile DEMO, this unit will keep DEMO
yy W
status even if you unplug the power cord
connection.
ou can enjoy other functions during
yy Y
the DEMO. Then the DEMO will pause to
temporary.
-Without input key in 10 sec, the DEMO
will play back automatically.
3
Operating
RANDOM
RANDOM
(AUTO DJ
RANDOM)
17
,,Note
yy S earching for a section within a track or
playing repeatedly or randomly is not
supported on the AUTO DJ mode.
uring AUTO DJ mode, press
yy D
PRESET.FOLDER W/S on the remote
control or FOLDER on the unit is not
available.
yy If you move to other functions or stop the
music using I on the unit (or Z ENTER on
the remote control) on AUTO DJ mode,
AUTO DJ function will be disable.
UTO DJ function is not supported in the
yy A
music file whose length is less than 60
seconds.
uring recording, AUTO DJ function is not
yy D
available.
yy If you change a disc while the AUTO DJ
function is activated, the function is
deactivated.
CM6520-AP_DNGAFLK_ENG.indd 17
2012-07-26
1:57:57
18
Operating
VOCAL FADER
You can enjoy the function as karaoke by reducing
singer vocal of music in the various sources. (MP3/
WMA/CD/etc.) Press the VOCAL FADER.
Radio Operations
Be sure that both FM and AM aerials are connected.
(Refer to the page 14)
To cancel it, press VOCAL FADER again.
- The quality of the VOCAL FADER may be
different depending on the recording
conditions of music files.
Using Microphone
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3
Operating
3.Sing along with the accompaniment. Adjust the
microphone volume by rotating
MIC VOL clockwise or unclockwise on the unit.
,,Note
hen not using the microphone, set the
yy W
MIC VOL to minimum or turn off the MIC
and remove the microphone from the
MIC jack.
Listening to the radio
1.Press FUNCTION until FM or AM appears in the
display window.
The last received station is tuned in.
2. Press and hold TUNING -/+ for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Press TUNING -/+ repeatedly.
3. Adjust the volume by rotating VOLUME on
the unit or by pressing VOL +/- on the remote
control repeatedly.
yy If the microphone is set too near the
speaker, a howling sound may be produced.
In this case, move the microphone away
from the speaker or decrease the sound
level by using the MIC VOL.
yy If sound through the microphone is
extremely loud, it may be distorted. In this
case, rotate MIC VOL to minimum.
CM6520-AP_DNGAFLK_ENG.indd 18
2012-07-26
1:57:57
Operating
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure to turn down the volume.
1.Press FUNCTION until FM or AM appears in the
display window.
2. Press to select a desired frequency;
- On the remote control : TUNING -/+
- On the unit : Y/U
3.Press PROGRAM/MEMORY. A preset number
will flash in the display window.
4.Press PRESET.FOLDER W/S to select the
preset number you want.
5.Press PROGRAM/MEMORY. The station is
stored.
7. To listen a preset station, press
PRESET.FOLDER W/S or 0 to 9 numerical
buttons.
Sound adjustment
Setting the surround mode
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using SOUND EFFECT.
The displayed items for the Equalizer may be
different depending on sound sources and effects.
On Display
Description
NATURAL
You can enjoy comfortable and
natural sound.
Local
Specialization
equalizer
Regionally optimized sound
effect. (FORRO/FUNK/
SERTANEJO/DANGDUT/ARABIC/
PERSIAN/INDIA/REGUETON/
MERENGUE/SALSA/SAMBA/
CUMBIA/AFRO HIP HOP)
AUTO EQ
Realizes the sound equalizer that
is the most similar to the genre
of which is included in the MP3
ID3 tag of song files.
POP
CLASSIC
JAZZ
ROCK
This program lends an
enthusiastic atmosphere to the
sound, giving you the feeling
you are at an actual rock pop,
jazz or classic concert.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY for two
seconds.
“ERASE ALL” will flash up on the unit display.
2.Press PROGRAM/MEMORY to erase all saved
radio stations.
Improving poor FM reception
Press T ST. /MONO on the unit or d/M on the
remote control. This will change the tuner from
stereo to mono and usually improve the reception.
CM6520-AP_DNGAFLK_ENG.indd 19
MP3 - OPT
This function is optimized
for compressible MP3 file. It
improves the treble sound.
BASS BLAST
Reinforces the treble, bass and
surround sound effect.
LOUDNESS
Improves the bass and treble
sound.
VIRTUAL
You can enjoy more virtual
surround sound.
BYPASS
You can enjoy the sound
without equalizer effect.
2012-07-26
3
Operating
6. Repeat steps 2 to 5 to store other stations.
19
1:57:57
20 Operating
,,Note
n some speakers, sound may not be heard
yy O
or heard in low sound depending on the
sound mode.
aybe you need reset the surround mode,
yy M
after switching the input, sometimes even
after the sound track changed.
y pressing BASS BLAST on the unit you
yy B
can directly select the BYPASS or
BASS BLAST sound.
Setting the USER EQ
3
You can listen to music with the desired sound
effect by adjusting the BASS, MIDDLE and TREBLE.
Operating
1.Press USER EQ.
“USER EQ” is displayed.
2.Press SET to enter the USER EQ.
3. Select the BASS, MIDDLE or TREBLE sound effect
you want by rotating FILE SEARCH.
4. Press Y/U to select the sound level you
want.
5. To finish the setting, press SET.
Setting the Clock
1. Turn the unit on.
2.Press CLOCK for at least 2 seconds.
3. Choose time mode by pressing Y/U.
- AM 12:00 (for an AM and PM display)
or 0:00 (for a 24 hour display)
4.Press SET to confirm your selection.
5. Select the hours by pressing Y/U.
6.Press SET.
7. Select the minutes by pressing Y/U.
8.Press SET.
Using your player as an alarm
clock
1. Turn the unit on.
2.Press TIMER. Each of functions flashes.
3.Press SET when the function you want to be
woken by is showing.
4. “ON TIME” will be displayed. This is your desired
time to unit turns on. Press Y/U to change
the hours and minutes and press SET to save.
5. The “OFF TIME” will be displayed. This is your
desired time to unit turns off.
6.Press Y/U to change the hours and
minutes and press SET to save.
7.Press Y/U to change the volume and
press SET to save. The clock icon "(“ shows
that the alarm is set.
8.Press TIMER button 2 times. You can check the
setting status.
,,Note
yy If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “(“ by pressing
CLOCK even when the player is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “(“ and setting
informaiton by pressing TIMER even when
the unit is turned off.
CM6520-AP_DNGAFLK_ENG.indd 20
2012-07-26
1:57:57
Operating
Sleep Timer Setting
Press SLEEP repeatedly to select delay time
between 10 and 180 minutes. After the delay time,
unit will turn off.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
,,Note
yy You can check the remaining time before
the unit turns off.
21
Advanced Operations
Playing the iPod/iPhone
You can enjoy the sound with your iPod/iPhone. For
details about iPod/iPhone, refer to the iPod/iPhone
User Guide.
1. Connect the iPod/iPhone firmly.
yy Press SLEEP. The remaining time appears in
the display window.
3
Operating
Dimmer
Press SLEEP once. The display window will be
darkening by half. To cancel it, press SLEEP
repeatedly until dim off.
If you turn this unit on, your iPod/iPhone will be
automatically turned on and start recharging.
2.Press iPod/AUX on the unit or FUNCTION on
the remote control to select iPod function.You
can operate your iPod/iPhone through an iPod/
iPhone’s display by using the supplied remote
control and also control on your iPod/iPhone.
CM6520-AP_DNGAFLK_ENG.indd 21
2012-07-26
1:57:57
22 Operating
To
3
,,Note
Do this
Operating
ON UNIT
ON REMOTE
Pauses or
restart
T ST. /MONO
d/M
Skip
Y/U
C/V
Search
Press and hold
Y/U
Press and hold
C/V
Move to the
previous
menu
-
REPEAT
(MENU)
Move to the
desired item
-
PRESET.
FOLDER
W/S
Chooses an
item
I
Z ENTER
Compatible iPod/iPhone
We recommend installing the latest software
version.
The unit supports the models as follows.
yy iPod touch 2 G, 3 G, 4 G
yy If this unit displays an error message, follow
the message. An error message “ERROR”.
- Your iPod/iPhone is not connected firmly.
-This unit recognizes your iPod/iPhone as
an unknown device.
- Your iPod/iPhone is exceptionally low in
power.
/The battery needs to be charged.
/If you charge the battery while iPod/
iPhone is extremely low in power,
it may take longer to be charged.
yy iPod/iPhone does not support recording
function when connected.
epending on your iPod/iPhone’s software
yy D
version, it may not be possible to control
your iPod/iPhone from this unit. We
recommed installing the latest software
version.
yy If you use an application, make a call, or
send and receive SMS text message, etc. on
iPod touch or iPhone, disconnect it from
iPod/iPhone dock of this unit and then use
it.
yy If you have a problem with your iPod/
iPhone, please visit www.apple.com/
support.
yy iPod 5 G
yy iPod 4 G
yy iPod classic
yy iPod nano 1 G, 2 G, 3 G, 4 G, 5 G, 6 G
yy iPhone 4
yy iPhone 3G
Depending on your iPod/iPhone’s software version,
you may not control your iPod/iPhone from the
unit.
CM6520-AP_DNGAFLK_ENG.indd 22
2012-07-26
1:57:57
Operating 23
Listening to music from your
portable player or external
device
The unit can be used to play the music from many
types of portable player or external device. (Refer to
the page 13)
1. Connect the portable player to the
PORT. IN (PORTABLE IN) connector of the unit.
Or
Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing 1/!.
You can record a various sound source to USB.
1. Connect the USB device to the unit.
2. Select a function in which you want to record
by using CD/USB, TUNER on the unit or
FUNCTION on the remote control.
One track recording - You can record to USB
after playing a file you want.
All tracks recording - You can recording to USB
after stop.
Program list recording - After showing the
programmed list, you can record it to USB.
4. Turn the portable player or external device and
start it playing.
3.Press REC. TO USB 2 on the unit or USB REC on
the remote control.
- If you connect both of USB1 and USB2, press
T ST. /MONO to record to USB1 and press I
to record to USB2.
Changing the lighting effect
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
You can change the unit’s lighting effects by
pressing LIGHT EFFECT on the unit in 5 types.
(Forward Level Mode/Peak Level Mode/Center
Level Mode/Reverse Level Mode/Shower Level
Mode)
3
Operating
3. Select the PORTABLE or AUX function by
pressing FUNCTION on the remote control or
iPod/AUX, PORT. IN on the unit.
Recording to USB
To select recording bit rate
and speed
1.Press REC. TO USB 2 on the unit or USB REC on
the remote control for longer than 3 seconds.
2. Press to select a bit rate;
- On the remote control: C/V
- On the unit: Y/U
3.Press REC. TO USB 2 on the unit or USB REC on
the remote control again to select the recording
speed.
4. Press to select a desired recording speed; (Only
AUDIO CD)
- On the remote control: C/V
- On the unit: Y/U
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5.Press REC. TO USB 2 on the unit or USB REC on
the remote control to finish the setting.
CM6520-AP_DNGAFLK_ENG.indd 23
2012-07-26
1:57:57
24 Operating
Dubbing USB to USB
You can do dubbing a various sound source in
USB1 to USB2 on USB function.
1. Connect a USB device including desired sound
files to USB1.
2. Connect an USB device to USB2.
3.Press REC. TO USB 2 on the unit or USB REC on
the remote control.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
Pausing recording
3
Operating
During recording, press REC. TO USB2 on the
unit or USB REC on the remote control to pause
recording. Press it again to restart recording. (Only
Radio/AUX/Portable)
,,Note
yy You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/WMA,
CD Only)
yy During recording MP3/WMA, there is no
sound.
yy When you stop recording during playback,
the file that has been recorded at that time
will be stored. (Except MP3/WMA files)
yy Do not remove the USB device or turn
off the unit during USB recording. If not,
an incomplete file may be made and not
deleted on PC.
yy If USB recording does not work, the
message like “NO USB”, “ERROR”, “USB FULL”
or “NO REC” is displayed on the display
window.
yy Multi card reader device or External HDD
can not be used for USB recording.
yy A file is recorded by about 512 Mbyte when
you record for a long term.
yy You may not store more than 999 files.
yy It’ll be stored as follows.
AUDIO CD
MP3/WMA
The other
source*
* : TUNER, AUX, Poratable and the like.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
CM6520-AP_DNGAFLK_ENG.indd 24
2012-07-26
1:57:58
4Troubleshooting
Troubleshooting 25
Troubleshooting
General
Symptom
Cause & Solution
yy The power cord is not plugged in. Plug in the power cord.
No Power.
No sound.
yy Check whether electricity failed.
Check the condition by operating other electronic devices.
yy Check whether you select right function.
Press FUNCTION and check the selected function.
yy If not, connect speaker cables correctly.
Speaker cables connected correctly.
yy An unplayable disc is inserted. Check the playable disc.
The unit does not start
playback.
yy No disc is inserted. Insert a disc.
4
yy The disc is dirty. Clean the disc. (Refer to the 29 page)
Troubleshooting
yy The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
yy The antenna is positioned or connected poorly.
Connect the antenna securely.
Radio stations cannot
be tuned in properly.
yy The signal strength of the radio station is too weak.
Tune to the station manually.
yy No stations have been preset or preset stations have been cleared (when
tuning by scanning preset channels).
Preset some radio stations, see page 19 for details.
yy The remote control is too far from the unit.
Operate the remote control within about 23 ft (7 m).
yy There is an obstacle in the path of the remote control and the unit.
The remote control
does not work properly. yy Remove the obstacle.
yy The batteries in the remote control are exhausted.
Replace the batteries with new ones.
iPod does not work.
yy Check whether the player is connected to the unit correctly.
Connect it to the unit correctly.
Sub woofer does not
work.
yy Check whether the woofer is connected to the unit correctly.
Connect cables to the unit correctly. (Refer to the 12 page)
CM6520-AP_DNGAFLK_ENG.indd 25
2012-07-26
1:57:58
5Appendix
26 Appendix
Trademarks and
Licenses
“Made for iPod” and “Made for iPhone” mean
that an electronic accessory has been designed
to connect specifically to iPod or iPhone
respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
Please note that the use of this accessory with
iPod, iPhone may affect wireless performance.
5
Appendix
CM6520-AP_DNGAFLK_ENG.indd 26
2012-07-26
1:57:58
Appendix 27
General specifications
General
Power requirements
Refer to main label
Power consumption
Refer to main label
Dimensions (W x H x D)
285 x 350 x 352 mm without foot
Net Weight (Approx.)
6.6 kg
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 90 %
Bus Power Supply
USB DC 5 V 0 500 mA
iPod DC 5 V 0 1 A
Inputs/Outputs
ANALOG AUDIO IN
1.2 Vrms (1 kHz), 600 Ω, RCA jack (L, R) x 1
PORT. IN
0.5 Vrms (3.5 mm stereo jack)
ANALOG AUDIO OUT
800 mVrms (1 kHz), 600 Ω, RCA jack (L, R) x 1
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
AM Tuning Range
522 to 1 620 kHz, 520 to 1 710 kHz or 522 to 1 710 kHz
5
Appendix
Amplifier
Stereo mode
Surround mode
220 W + 220 W (4 Ω at 1 KHz)
Front
220 W + 220 W (4 Ω at 1 KHz, THD 15 %)
Subwoofer
220 W (4 Ω at 60 Hz, THD 15 %)
CD
Frequency Response
40 to 20 000 Hz
Signal-to-noise ratio
75 dB
Dynamic range
80 dB
CM6520-AP_DNGAFLK_ENG.indd 27
2012-07-26
1:57:58
28 Appendix
Speaker specifications
Front speaker
Type
2 Way 2 speaker
Impedance
4Ω
Rated Input Power
220 W
Max. Input power
440 W
Net Dimensions (W x H x D)
240 x 404 x 317 mm
Net Weight
5.16 kg
Passive subwoofer
Type
1 Way 1 speaker
Impedance
4Ω
Rated Input Power
220 W
Max. Input power
440 W
Net Dimensions (W x H x D)
272 x 333 x 333 mm
Net Weight
5.73 kg
yy Design and specifications are subject to change without notice.
5
Appendix
CM6520-AP_DNGAFLK_ENG.indd 28
2012-07-26
1:57:58
Appendix 29
Maintenance
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
Do not use volatile liquids such as insecticide spray
near the unit.
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
5
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
CM6520-AP_DNGAFLK_ENG.indd 29
2012-07-26
Appendix
Maintaining the Unit
1:57:58
CM6520-AP_DNGAFLK_ENG.indd 30
2012-07-26
1:57:58
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement