LG | FFH-261A | LG FFH-261A Owner’s Manual

LGEAL_FFH-261/263(ENG)-A044E
MINI HI-FI AUDIO SYSTEM
OWNER'S MANUAL
MODELS
:
FFH-261A/L/S/AX/AD
FE-261E
FFH-263A/L/S/AX/AD
FE-263E
Please read this manual
carefully
before
operating your
unit.
Retain it for future reference.
Designs
and
specifications are subject
improvement.
to
change
without notice for
COMPACT
DIGITAL AUDIO
P/NO:3828R-A044E
PRECAUTION
CAUTION
CAUTION
Use of controls
procedures
RISK OF ELECTRIC
or
adjustments or performance of
specified herein may
other than those
result in hazardous radiation exposure.
SHOCK DO NOT OPEN
Laser
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE
component in this product is capable of
emitting
radiation
exceeding
the limit for Class 1.
COVER(OR BACK)
NO USER SERVICEABLE PARTS INSIDE. REFER
CAUTION:INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED. AVOID
EXPOSURE TO BEAM.
SERVICING TO QUALIFIED SERVICE PERSONNEL.
VARNING:OSYNLIG LASERSTRALNING NAR
DENNA DEL AR OPPNAD STRALEN AR FARLIG.
Attention:Quand
Explanation Graphical Symbols:
The
s'exposer
lightning flash with arrowhead symbol,
an equilateral triangle is intended to
within
alert the
user
l'appareil est ouvert, ne pas
radiations invisibles du faisceau laser.
This label is located
on
the interior.
to the presence of uninsulated
dangerous voltage
within the
product's
enclo-
that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
sure
The exclamation
triangle
aux
point
within
an
is intended to alert the
equilateral
user
to the
presence of
important operating and maintenance(servicing) instructions in the literature
accompanying the appliance.
CLASS 1
LASER
KLASSE 1
LASER
PRODUKT
LUOKAN 1
LASER
LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT LASER
This
Compact Disc player
product.
is classified
PRODUCT
as a
CLASS 1
LASER
WARNING
The CLASS 1 LASER PRODUCT label is located
TO REDUCE THE RISK OF FIRE OF ELECTRIC
the exterior.
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
To avoid electrical
shock, do
not open the
Refer
qualified
personnel only.
The
servicing
to
apparatus shall
splashing
such
as
and that
cabinet,
not be
exposed to dripping or
objects filled with liquids,
be placed on the apparatus.
no
vases, shall
Warning:
Do not install this
a
book
case or
equipment
in
a
confined space such
similar unit.
2
on
OPERATING ELEMENTS
FRONT VIEW
BACK VIEW
31
OPTION
30
12
3
29
4
5
6
28
27
26
108 97
25
24
11
32
23
12
22
13
33
21
14
15
20
34
16 17
18 19
36
19. AUTO TUNING
FRONT VIEW
1.
35
UP(TUNER),
RECORD / RECORD PAUSE
button(
REC/
button
)
(
)
2.
REMOTE SENSOR
20. TAPE DECK 2 EJECT
3.
MDSS indicator
21.
4.
MEMORY / PROGRAM button
22.
5.
DIMMER button
23.
6.
MDSS button
7.
EQ. PATT. button
8.
CD REPEAT button
24.
(Equalizer)
PLAY MODE button
9.
position ( PUSH EJECT)
(DISC1,2,3)
STOP / CLEAR button (
STOP/CLEAR)
FUNCTION SELECT button [FM, MW(AM),
LW/SW (OPTION), CD, TAPE 1/2, AUX]
CD OPEN/CLOSE button (CD
)
DISC DIRECT PLAY buttons
25. TIMER button
26. CLOCK button
(OPTIONAL)
27.
MODE / RIF button
DISC SKIP button
28. CD PAUSE /
SET(CLOCK / TIMER) / COUNTER
(TAPE) button (CD II / SET / COUNTER
RESET) / RDS (TUNER) : OPTIONAL
10. TAPE 1/2 select button
11.
TAPE FAST FOR-
WARD, TRACK FORWARD SKIP/SEARCH (CD)
RESET
POWER button
12. NORMAL DUBBING button
29. VOLUME knob
CD SYNCHRO RECORDING button
13. HEADPHONE socket
30. CD PAUSE / SET indicator
(PHONES)
31. CD DOOR
14. HIGH-SPEED DUBBING button
15. TAPE DECK 1 EJECT
16.
17.
position ( PUSH EJECT)
AUTO TUNING DOWN (TUNER), TAPE REWIND,
TRACK BACKWARD (CD) SKIP/SEARCH
button(
)
32. ANTENNA
PRESET DOWN button
BACKWARD PLAY
(PRESET
18.
BACK VIEW
DOWN /
(OPTIONAL)
)
33.
button
(PRESET
terminal
34. SPEAKER terminal
35. VOLTAGE SELECTOR
PRESET UP button
FORWARD PLAY button
(AERIAL)
AUXILIARY INPUT sockets
UP /
36.
)
3
POWER CORD
(OPTIONAL)
FUNCTION DISPLAY
12
3
4
5
6
7
16
15 14 13 12 11 10
1.
LEVEL indicator
2.
CD REPEAT indicator
3.
VOLUME
FUNCTION,
9
8
DISC entered indicator
9.
10. R.I.F. indicator
(Radio
Interference
Filter)
11. AUTO TUNE RECEIVING indicator
LEVEL, CLOCK,
FREQUENCY, TAPE COUNTER, CD PLAYING
12. MUTE indicator
TIME, MDSS, EQ PATTERN
13. TAPE DIRECTION indicator
display
4.
LEVEL indicator
5.
FM STEREO RECEIVING indicator
14. PLAY MODE indicator
6.
FM MONO indicator
15. RECORD / RECORD PAUSE indicator
7.
RDS indicator
16. TIMER indicator
8.
DISC NO. indicator
(Use only
(OPTIONAL)
auto
reverse
deck)
REMOTE CONTROL
POWER
SLEEP
MUTE
1
TUNER/BAND
23
4
AUX
PRESET
6
1.
POWER button
2.
TUNER / BAND button
3.
AUX button
4.
EQ PATT. button
5.
CD FUNCTIONS
7
?
8
EQ PATT
?
CD
?
D.SKIP
?
5
REPEAT
?
TAPE1
TAPE2
REC
9
OPTION
10
VOLUME
DECK
(Equalizer)
DISC SKIP
(D.SKIP) button
(
) button
STOP/CLEAR (
) button
SKIP/SEARCH (
PLAY/PAUSE
)
buttons.
REPEAT button
6.
SLEEP button
7.
MUTE button
8.
PRESET DOWN/UP
9.
TAPE FUNCTIONS
(
)
button
?TAPE1/TAPE2button
?
RECORD / RECORD PAUSE
?
BACKWARD PLAY button
button( REC/II)
) : OPTIONAL
?
FORWARD PLAY button
?
STOP
?
REWIND / FAST FORWARD button
button(
(
)
)
10. VOLUME CONTROL
4
(
(
)
buttons
(
)
REMOTE CONTROL
Control
Range
The remote control device is
designed
for the range
shown in the illustration.
NOTE
:
Strong light
obstacles between the remote control
or
device and the stereo
Approx.7m
system may interfere with the
of the remote control.
functioning
Notes
on
Batteries
Your remote control
Use two
comes
"AAA(UM-4.
IEC
with batteries.
R03)" type high quality
batteries.
POWER
TUNER/BAND SLEEP
AUX
PRESET
EQ
D.SKIP
When the remote control fails to
MUTE
MUTE
SLEEP
POWER
PATT
TUNER/BAND
ATT
operate accurately
at maximum distance from the unit.
PRESET
CD
worn
out batteries with
Install two "AAA"
type batteries, observing
and
battery polarity(
might damage the
Do not
an
old
use
one
When you
time,
are
remove
the
).
Reversed
correct
battery polarity
unit.
different
with
Replace
new ones.
types of batteries together,
or
new one.
not
going
to
use
the batteries to
the unit for
a
long
prevent possible
electrolyte leakage.
CONNECTIONS
Connection the AUX
Two
phono
sockets marked 'AUX'
are provided on
connecting other units (for
example, a record player with a pre amplifier, video
recorders or tape recorders.)
the
rear
of the unit for
Connecting
AUX
R
L
the Loud
Speakers
Insert the red wire of the
hand
the red terminal
rear
right/left
marked(+) at the
speaker
Insert the black wire into the black terminal
AUDIO OUT
L
Left
Adjusting
the
voltage (optional)
If your set is equipped with a voltage selector at the
back side, be sure to set it to your local power
supplied before connecting the AC power cord.
5
Speaker
R
into
of the unit.
Right Speaker
marked(-).
CONNECTIONS
Antenna(aerial) Connection
For the models for other countries
For the
and U.K. model
European
IMPORTANT
figure (1), (3).
figure (2), (4).
FM Antenna
(aerial) Connection
signals are very weak, no external
antenna is necessary, simply connect the supplied
FM indoor antenna (aerial) wire to the terminal
Unless radio
marked FM
(1) 2 BAND(FM/AM)
on
the back of the unit
(2) 3 BAND(FM/MW/LW)
AREA
AREA
MW/LW
FM external
antenna
antenna(aerial)
(not supplied)
For MW/LW
the
75 ohms coaxial cable
loop
loop
(aerial)
reception, connect
(aerial) to the
antenna
terminal marked MW/LW
AM
loop antenna
(aerial)... included
FM indoor
antenna(aerial)
AM
FM external
antenna(aerial)
(not supplied)
Position
it for the
MW
/LW
GND
FM
best
FM
reception
75Ω
(3) 3 BAND(FM/MW/SW)
(4) 2 BAND[FM/AM(MW)]
AREA
For
MW
loop
antenna
(aerial)
FM indoor antenna
(aerial)
Position it for the
best
the
antenna(aerial)
(not supplied)
terminal marked AM
FM external
antenna(aerial)
(not supplied)
MW
AM
FM
75Ω
FM
MW ANTENNA WIRE
TWISTED LINE
SW Antenna
AM(MW) loop
antenna (aerial)
coaxial cable
reception
SW
GND
AM(MW) reception, connect
loop antenna (aerial) to the
FM external
AREA
FM ANTENNA WIRE
6
CLOCK SETTING
Example
1.
Set to 9:25 in the
:
morning
5.
Press the CLOCK button.
(If
the clock is
Press the CDII/SET/COUNTER RESET button.
press and hold the
than 1.5 seconds.)
already set,
CLOCK button for
more
CD /SET
COUNTER
CLOCK
2.
Select
a
pressing
24 hour
cycle
or
12 hour
cycle by
6.
the PRESET DOWN/UP button.
Set the minutes with PRESET DOWN/UP
button.
CD /SET
COUNTER
CD /SET
COUNTER
(24HR)
DOWN-PRESET
or
(12HR)
DOWN-PRESET
7.
3.
PRESET-UP
PRESET-UP
Press the CDII/SET/COUNTER RESET button.
The clock starts
Press the CDII/SET/COUNTER RESET button.
operating.
CD /SET
COUNTER
CD /SET
COUNTER
Information
4.
on
the time
AM 12:00
=
midnight
PM 12:00
=
noon
Set the hour with PRESET DOWN/UP button.
NOTE:
When
a power interruption has occurred for
than 10 seconds.
CD /SET
COUNTER
The clock
the
DOWN-PRESET
PRESET-UP
7
setting
display.
is
erased, and
"--
:
--"
more
will flash
on
BEFORE OPERATING
Volume
MUTE button
Adjustment
Turn VOLUME clockwise to increase the sound
or
counterclockwise to decrease it.
If you turn the volume up
more
You
than the maximum
level, the volume level flashes in the display.
(Or
press VOLUME CONTROL
remote
(
)
button
on
Sound
control)
mute your unit in
can
answer
the
The
indicator appears
order, for example,
to
telephone.
on
the
display.
MODE/RIF
(Radio Interference Filter) button
Quality Adjustment
(Multi Dynamic
Sound
To switch from
System)
(UBB
:
Ultra Bass
Booster),
and vice
reception
interference, switch the
STEREO off.
When
lights
to stereo
receive stereo FM without
(Hi-Tone),
and surround
effect.
The MDSS indicator
mono
If the power of transmission is too weak to
versa.
Press the MDSS button to reinforce treble
bass
remote
the
control.)
MDSS
(on
Press this button to mute your unit.
level,
a
MW(AM),
or
LW
broadcasting
is
being
recorded, the R.I.F.(BEAT-SWITCH) button
up.
To cancel it press the MDSS button
used to reduce unwanted "beat"
again.
which
were
not heard before
signals
recording.
and
can
be
noise,
To activate stereo sound
You
can
select
a
choose between 4 fixed sound modes
desired sound mode
by using
Dimmer function
:
the EQ
This function will be darken the
PATTERN button.
Press the EQ PATTERN button
current sound mode scrolled
once
to
see
the
the
And in SLEEP function
ROCK
: more
darken
POP
:
less
CLASSIC
:
for orchestral music
bass,
more
again.
treble
bass, less treble
For
personal listening
headphone to headphone socket.
sound comes from the speakers.
Connect
No
half in
press it once again the LEDs of the FUNCTION
SELECTOR will go out. To cancel it press the button
display.
Press the EQ PATTERN button repeatedly, until
the desired sound mode is scrolled on the display.
FLAT
: linear frequency response
on
display by
power-on status, if you press the DIMMER button
once, only the display will be darken, and if you
8
by
half too.
setting
mode the
display
will
RADIO RECEPTION
Tuning
in
1. Turn
the power.
on
3. To memorize in
Automatically
2. Turn the FUNCTION SELECTOR
(1)
(2)
(3)
until
repeatedly
the desired band appears.
3. Press and hold the TUNING DOWN/UP
)
tunes in
button for
a
station
(
or
(4)
in
1. Turn
the power.
on
Manually
repeatedly
Select
desired station.
a
desired channel number
by pressing
button, while the
Press the PROG./MEMO. button
4. To recall
until
the desired band appears.
and
a
Press the PROG./MEMO. button.
again
before
stops flashing.
presets.
Press and hold the PRESET DOWN / UP button
3. Press the TUNING DOWN/UP
briefly
Select
the channel number
2. Turn the FUNCTION SELECTOR
button
channel
adding
preset number flashes.
automatically.
Tuning
or
the PRESET DOWN / UP
than 0.5 second. The unit
more
selecting
number.
repeatedly
(
until the desired
)
or
preset number appears
press it
or
repeatedly.
until the desired sta-
tion appears.
RDS
Storing
(Radio Data System) Reception
(OPTIONAL)
Stations
1. To clear any program
previously
stored in any
What is RDS?
memory.
(1)
RDS
Press the PROG./MEMO. button for
1.5 seconds in TUNER mode
is
(2)
in the
flashing
Press the
CLEAR is
so
more
than
that CLEAR
normal radio
STOP/CLEAR button while
in the
on
System)
FM in many
is
system gradually being
countries, where by an
a
inaudible stream of data is transmitted in addition to the
display.
flashing
Data
(Radio
introduced
tion
display.
signal.
including
information and
radio station
This data contains various informa-
station / transmitter
a
being
identification, traffic
list of alternative
for the
frequencies
received.
2. To memorize the stations in order
(1)
Turn the FUNCTION SELECTOR to select
desired
(2)
Select
wave
a
Reception
(
)
or
2. Select
button.
Press the PROG./MEMO. button and
desired station
again
by using the
) button.
3. When the RDS transmission is
play
Press the PROG./MEMO. button
a
DOWN/UP(
preset
number flashes.
(4)
of RDS Stations
1. Turn the FUNCTION SELECTOR to select FM.
desired station with the TUNING
DOWN/UP
(3)
a
band.
while
TUNING
received, the dis-
shows the program service
name
after
(PS)
RDS indicator appears.
preset number is flashing.
(5) Repeat step (1)
to
(4)
to memorize up to 30
Notes:
stations.
?
?
RDS is
only available for FM reception.
(PROGRAM SERVICE) NAME is
played automatically when a RDS station
The PS
received.
To recall the
frequency
Press the RDS button.
9
disis
CD PLAYING
To
play
Press
one
disc
buttons to start
To
only
of the DISC DIRECT
one
PLAY(DISC 1,2,3)
play.
discs
remove
Press the CD OPEN/CLOSE
(CD
)
button to open
the disc
Number 1 disc
Basic
compartment. You
Number 2 disc
the disc
1. Select the CD FUNCTION
by turning
the
2. Press the CD OPEN/CLOSE
(CD
)
button to
Two discs
open the disc compartment.
3. Load disc (s) with the label side up.
Playing one or two discs
Place discs
trays
on
tray
1 and 2.
on
The disc
)
button to
placed
the left side
on
tray will be played
an
8cm(3 in.) disc, put
it onto the inner
tray.
NOTES
(CD
)
(
) (or
button to start
on
(CD
)
button to
close the disc compartment.
:
button to
Do not tilt the unit with discs loaded. This may
the discs. Usage under these condi-
dislodge
remote
tions may
play.
Do not
During playback
disc
A
tray which has no disc is skipped and play
proceeds to the next tray. The indicator of the
skipped tray number goes out in the display.
damage
place
tray
more
at the
the discs.
than
one
compact disc
on one
time.
same
If, during CD play, the video image of a nearby
distorted, or if static is heard from a
nearby radio, move this unit further away from the
television is
stop play
affected television
or
radio.
STOP/CLEAR button.
To pause
Press the CDII/SET/COUNTER RESET
control) button.
play, press
resume
it
skip discs
During play or in
the
for
Searching
(or
in
on
You
a
Particular Point
Track
a
particular point in a track during play
by monitoring
high-speed cueing sound or
observing the CD counter in the display.
again.
locate
can
a
the
To
stop mode, press the DISC SKIP
button.
To search back:
During play
Play begins automatically
desired
In the
(CD
open the disc compartment.
2. Remove the discs and replace with other discs.
close the disc compartment.
remote
applicable during programmed
3. Press the CD OPEN/CLOSE
5. Press the PLAY
To
is not
1. Press the CD OPEN/CLOSE
press the DISC SKIP
trays. Place the next disc
4. Press the CD OPEN/CLOSE
Press the
remaining
next.
circle of the
To
changed
During Play
while the other
play.
NOTICE
control)
played.
operation
This
3.
To load
be
can
disc is
Playing three discs
After placing two discs,
button to rotate the
Discs
Changing
FUNCTION SELECTOR.
remove
tray, press the DISC SKIP button
the disc tray.
to rotate
Operation
two discs. To
can remove
the back
on
Keep
after
skipping.
stop mode
the
button
pressed
and release it at the
pressed
and release it at the
point.
To search forward:
The
changer skips to the next disc, but the player
remains stopped. Press the PLAY (
on
) (or
remote control) button to play the next disc. Play
begins and all the discs are played once.
Keep
the
desired
10
point.
button
CD PLAYING
to the
Skipping
Beginning
of
Programmed Play
a
Track
You
The
locate the
can
To return to the
beginning
beginning
of any track
on a
of the current
player has a memory function that allows play of
up to 20 tracks over three discs in any order.
1. Press the PROG./MEMO. button in the stop
disc.
mode.
or
2. Press DISC SKIP button to select
track
previous
Press the
button
once
to return to the
3. Press the
beginning
button
backward
To
one
by
repeatedly
to
skip
tracks
one.
button
one
by
with
repeatedly
to
until track number "6" is
5.
skip track(s)
repeatedly
display.
only
Repeat steps
or
button to start
the remote
To check the
control)
(
play.
: on
programmed
remote
play
one
track
repeatedly
Press the REPEAT button to
press the PLAY/PAUSE
start
To
display
(
on
:
unit
)
the
and
play
disc
button to
?
repeatedly
(
"
display
: on unit)
all tracks
on
all discs
and press the
button to start play.
repeatedly
display
PLAY/PAUSE
(
(2)
,
(3)
To
repeat only selected tracks
Program the desired tracks, and press the REPEAT
display
"
ALL
DISC
"or"
(1)
in
pressed
number, and
a
displayed.
programmed
contents
during stop
and
STOP/CLEAR button.
so
that
"
button.
or
Press the PROG. / MEMO. button.
change
the
programmed
tracks
Press the PROG. / MEMO. button to
display
the
program number.
Select the desired track on the disc with DISC
SKIP button and
repeat play
Press the REPEAT button
"00" appears in the track number.
Select the desired track on the disc with DISC
changed
".
(2)
To cancel
display
track
Press the PROG. / MEMO. button
SKIP button and
: on
To
button to
a
To add tracks to the programme
(1) Press the PROG. / MEMO. button to search until
""
unit)
number,
button to
Press the REPEAT button three times to
ALL
DISC
disc
then press the
".
DISC
a
program number will be
play.
play
stop mode,
To clear the
one
and press PLAY/PAUSE
To
"
play.
Press the REPEAT button twice to
start
"
control)
contents
Each time the PROG. / MEMO. button is
To
displayed
2 to 4.
6. Press the PLAY
one.
Repeat Play
(Operating
track, press the
button
4. Press the PROG. / MEMO. button.
Press the
forward
To select the 6th
in the
tracks
skip
disc.
track.
of the current track.
Press the
a
button to select the
or
(3)
"inthe
or
button.
Press the PROG. / MEMO. button.
goes out.
NOTICE
?
NOTICE
the
During
programmed play, you
play
repeatedly one track (
) or all discs (
During the repeat play of an entire disc, if you
select the programmed play, it is changed to
repeat play of all discs.
ALL
DISC
The DISC SKIP button does not
programmed play.
can
).
11
operate during
AUXILIARY FUNCTION
1. Switch
on
the
device i.e. TV
auxiliary
connected to the
NOTE:
VCR,
or
mounted AUX sockets.
rear
2. Press the "AUX" function button.
You
can
see
RECORDING section.
also record from the
auxiliary input
source,
TAPE PLAYBACK
Playback
Preparation
You
All sides
normal
only
can use
:
tapes.
Unit
and
1. To set the cassette function:
Switch the unit
(If
on
the front and
side in deck 2
stops automatically
at the end of the
and press the TAPE 1/2 button.
necessary press the button
other
plays
reverse
again
Endless
loop
Like
:
to select the
tape.
but six times
in succession in deck 2.
deck.)
2)
2. To insert cassettes:
In
cassette deck 1
Open
deck
2
or
PUSH EJECT
cassettes with the
or
both
position.
tape side
or
the
by pushing
Insert
one or
facing
Option
case
and 2.
of non-autoreverse
(Front
side
(auto stop)
deck 1
play only)
two
to the bottom and the
cassette side that you wish to hear
in cassette deck 1
2nd
4.
the front
Playback:
playback with
(reverse side).
Start
2.
PLAY button
(front side)
or
NOTE:
DECK 1
-
DECK 2
-
Auto
stop only (Non-auto reverse)
Auto
reverse
5.
Fast forward
or
rewind
Press button
on
:
the unit
control for fast forward and
3. Auto reverse
played
6. To end
and how often with the PLAY MODE button.
1st
In
and auto
playback
Press the
Option
case
the remote
to rewind.
:
Select which side of the cassette is to be
1)
or on
The unit
of non-autoreverse
reverse
(auto stop)
:
STOP/CLEAR button.
stops automatically
at the end of the
deck 2.
In this case, the continuous
1 and 2 cannot be
play
performed.
between deck
Tape Counter
Reset
Press the COUNTER RESET button while
(a)
DECK 1
playing
Front side
(b)
DECK 2
One side
tape.
deck 1
play only.
(Auto Reverse)
:
Unit
plays
reverse
and
the front
or
side in deck 2
stops automatically
at the end of the
tape.
12
or
stop.
tape
RECORDING
CD, Radio
Connected Equipment
Recording
from
a
CD
or
The CD
Wind up the
only
You
can
synchro recording function dubs
programmed titles automatically
CD and
Preparation
Use
Synchro Recording
to the
tape
normal
tapes.
record from cassette deck 2
1. To select the function
Switch the unit
on
2.
Open
the CD compartment with the CD OPEN /
CLOSE
CD, TUNER, AUX
) button, insert
again.
(CD
3. To insert cassette
:
Open
the cassette deck 2.
Insert
a
blank cassette into the cassette
discs and close
the CD compartment
etc.
2. To insert the cassette
a cas-
1. Select the CD function.
only.
:
and select
complete
sette.
starts.
point recording
a
into
compart-
:
Open
the cassette deck 2.
Insert
a
blank cassette into the cassette
compart-
ment.
ment.
Rewind the cassette to the
beginning
of the
tape.
3. PLAY MODE
Select the
(OPTIONAL)
play mode with PLAY
if you wish to record
one
MODE
cassette side
4. Auto
button,
only
and
has ended.
for both cassette sides.
or
Stop (OPTIONAL)
If you want to record onto another
the
Change
tape after one
tape, then push the PLAY
button.
4.
mode
Recording
Press the
The
:
REC/
button.
in pause mode.
again
the
5. To start
recording
Press the
REC/
side
:
button
or
The
PLAY button
(OPTIONAL).
The
or
for
recording
If both cassette sides
are
to be recorded
) always start with the
(Use only auto reverse deck)
,
(PLAY
*
Press the
the
reverse
2. If you
The unit
(OPTIONAL)
if you
only
wish to
for both
or
side of the cassette
want to record certain
tape.
titles, program
synchro recording.
the desired track with the
track, select
button
commencing CD synchro recording.
4. The function change is not possible during
recording.
:
at the end of the
only
these before the CD
STOP/CLEAR button.
stops automatically
MODE,
3. If you wish to record from the desired
time.
recording
at
If the last track has stopped because the tape is
full, the track will be recorded again completely on
before
7. To end the
stops automatically
cassette sides.
front side
interrupt recording :
To interrupt the recording for a short period, press
the
REC/
button again.
To continue with the recording, press the
REC/
one more
and
record the front side and
6. To
button
:
recording begins
Select the PLAY
.
for 7
NOTES
:
PLAY
recording
1. Auto reverse
MODE
recording mute mode
starts playing and
the end of the CD.
begins.
NOTE
player
Press the CD SYNC. button.
if you want to record the front side
reverse
enters into the
recording.
The REC indicator flashes and holds the cassette
5. To start
tape
seconds then CD
tape.
13
RECORDING
Recording
(Dubbing)
from
Tape
to
3. To
Tape
DUBBING for double
Wind up the tape to the
Use only normal tapes.
point recording
The
starts.
of the
tape.
cassette deck 1.
Insert
a
:
4. To end
dubbing
Press the
The unit
recorded cassette and the cassette side
that you wish to dub to the front.
Open cassette deck 2.
NOTE
blank cassette in the cassette
operate during
dubbing.
:
Open
speed dubbing.
automatically.
starts up
The PAUSE function does not
1
1. Select the TAPE function.
2. To insert cassettes
dubbing
NOTE
Dubbing only functions from cassette deck
(playback) to cassette deck 2 (recording)
a
beginning
Press NORMAL DUBBING for normal and HIGH
Preparation
Insert
dub(auto dubbing):
Rewind both cassettes to the
stops automatically
compartment
at the end of the
tape.
:
You cannot
dubbing.
and the cassette side that you wish to record to the
front.
:
STOP/CLEAR button.
change
the
speed
The volume has
no
of
dubbing
effect
on
while
the record
level.
TIMER
Timer
(2)
Setting
With the TIMER function you can have the radio
reception and recording, CD play, tape play or play
and
from
recording
auxiliary
source
turned
on
and off
1. Check the current time.
2. Press the TIMER button to enter the timer
setting mode.
(If the timer is already set,
more than 1.5 seconds.)
(3)
display
function-TUNER, CD, TAPE, AUX
-
(4)
and each
flashes in the
(5)
in turn.
(6)
(7)
:
TUNER
TUNER
by turning
the
Press the CDII/SET/COUNTER RESET
on.
Set the minute to switch on, by
the PRESET DOWN/UP button.
pressing
Press the CDII/SET/COUNTER RESET
button to confirm the minute to switch
button to confirm either PLAY and REC.
:
on
The minute flashes.
Press the CDII/SET/COUNTER RESET
REC
Set the hour to switch
button to confirm the hour to switch
TUNER appears in the display window.
'PLAY' and 'REC' flashes in turn.
PLAY
Press the CDII/SET/COUNTER RESET
PRESET DOWN/UP button.
3. If you want to select the TUNER, press the
CDII/SET/COUNTER RESET button until the
(1)
desired radio station of the
button to confirm the selected preset
number.
press the button for
indicator appears in the
a
previous programmed preset numbers.
If the radio stations have nothing in the
memory, this step is automatically skipped and
you can operate continuously from step (3); in
this case, it will play the radio broadcast that
was being received before turning off the unit.
at the time desired.
display
Press the PRESET DOWN/UP button to
select
on.
Now OFF TIME appears and the hour flashes
in the display.
play only
play and recording
14
TIMER
(8)
the time to switch off in the
Program
as
the time to turn
way
Set the volume level
(9)
3. When the TAPE is selected for
same
cassette decks have cassette
on.
by pressing
the
sette
PRESET DOWN/UP button.
case
tapes in;
if both
the
cas-
in deck 2 will be selected first.
4. The timer-off function will be
Press the CDII/SET/COUNTER RESET but-
(10)
tape
playback,
of power-on
by
operated only
the timer
in the
on.
ton to confirm the selected volume level.
remains in the
ting
(11)
display
perfected.
has been
Switch the system off.
The selected function is
switched
on
(Operating
When the
automatically
cally
and off at the time set.
If you select the AUX:
Follow steps (1)~(11)except
select the timer
check the timer
button
steps (2)~(3)
or
that
"
that
"
used, the power is automati-
specified
you
time has
elapsed.
for about 5
can see
means
that the units turns off auto-
after 90 minutes.
Each time the button is
pressed the time interval
by 10 minutes. i.e.
before it turns off is reduced
80...70...etc.
2. To check the
you can
cancel. You can also
check the
""
or
time until the power is
While the
is
so
NOTE:
goes out.
If you press the SLEEP button while the
displayed, the SLEEP time is set again.
TAPE is selected for
disc is entered in the disc drawer
cassette
sleep function is active press the SLEEP
briefly. The time remaining until it turns off
displayed for about 5 seconds.
button
timer, press the TIMER
display
remaining
turned off.
lights
tape is entered in the
sleep
time is
if
playback,
or no
3. To cancel the
cassette
sleep
timer mode
If you wish to stop the function press the SLEEP
button repeatedly until 10 appears, and then press
deck, the TUNER
function will be
2.
display
matically
NOTES:
no
control)
specify
In the
activating or
setting status.
in the
1. When the CD
timer is
seconds. This
pressed
up in the display.
To cancel the TIMER, press the TIMER button
so
the remote
only
check the timer.
Each time the TIMER button is
To activate
sleep
Setting
the time until the power is turned
off, Press the SLEEP button.
If you select the CD or TAPE:
Follow steps (4)~(11)of the '3. If you want
to select the TUNER'. explanation section.
or
with
turned off after the
1. To
of '3. If you want to select the TUNER'.
explanation section.
4. To cancel
Timer
Sleep
and the timer set-
operated.
When the CD programmed playback is selected,
the REPEAT ALL DISC (
) will be selected
automatically.
the SLEEP button
once
again
while 10 is dis-
played.
ALL
DISC
AUTO FUNCTION SELECT SYSTEM
This unit has
ous
an
auto function select
functions. i.e. If
radio
a
system for vari-
function is in
and
wish
1. On the remote control
operation(e.g.
to
switch
to
reception),
you
another(e.g. cassette playback), all you have to do is
select the desired function(cassette playback) directly, the unit automatically switches to the new function(cassette recorder).This applies for the following
TUNER
:
CD
:
TAPE
:
PRESET(
) buttons
PLAY/PAUSE(
) button
FORWARD (
and
REVERSE (
)
PLAY button (OPTIONAL)
2. On the unit
functions:
CD
:
DISC DIRECT PLAY buttons
(DISC 1, 2, 3)
15
)
SPECIFICATIONS
MODEL
SECTION
FFH
-
FFH
261
263
-
AMP
Output Power
Frequency Response
Signal-to-Noise Ratio
10W+10W
(4Ω, 2ch,
T.H.D
10%)
10W+10W
(4Ω, 2ch,
42~25000Hz
42~25000Hz
83 dB
83 dB
T.H.D
10%)
TUNER
FM
87.5~108MHz
Tuning Range(optional)
or
65~74MHz
& 87.5~108MHz
Intermediate Frequency
Signal-to-Noise Ratio(Mono/Stereo, 98MHz)
Frequency Response
87.5~108MHz
or
65~74MHz
& 87.5~108MHz
10.7 MHz
10.7 MHz
62/58 dB
62/58 dB
60~12500Hz
60~12500Hz
522~1611kHz, 530~1720kHz
522~1611kHz, 530~1720kHz
AM(MW)
Tuning Range(optional)
or
Intermediate
Frequency
Frequency Response
530~1610kHz
or
530~1610kHz
450 kHz
450 kHz
100~2000Hz
100~2000Hz
5.8~18.0MHz
5.8~18.0MHz
450 kHz
450 kHz
35 dB
35 dB
SW(OPTIONAL)
Tuning Range
Intermediate Frequency
Signal-to-Noise Ratio(11MHz)
LW(OPTIONAL)
153~281 kHz
153~281 kHz
450 kHz
450 kHz
28 dB
28 dB
FF, REW Time(C-60)
120
120
Frequency Response
Signal-to-Noise Ratio
Channel Separation
125~8000Hz
125~8000Hz
43
43
Tuning Range
Intermediate Frequency
Signal-to-Noise Ratio(254kHz)
CASSETTE DECK
50
sec.
dB(P/B), 43dB(R/P)
dB(P/B), 45dB(R/P)
50
sec.
dB(P/B), 43dB(R/P)
dB(P/B), 45dB(R/P)
CD
Frequency Response
Signal-to-Noise Ratio
40~18000Hz
40~18000Hz
70 dB
70 dB
GENERAL
Power
Refer to the back
Net
273x326x360mm
273x326x360mm
6.1
6.1
Net
Requirements
Dimensions(WxHxD)
Weight
of the unit.
kg
MODEL
SECTION
panel
FE
-
Refer to the back
of the unit.
kg
FE
261E
panel
-
263E
SPEAKER SYSTEM
Bass Reflex 2
Bass Reflex 2
Way 2 Speaker System
4Ω
4Ω
60~18000Hz
60~18000Hz
Sound Pressure Level
85
85
Rated
10W
10W
20W
20W
200x325x206mm
200x325x206mm
2.3kg
2.3kg
Input Power
Max. Input Power
Net Dimensions(WxHxD)
Net Weight
*
Way 2 Speaker System
Type
Impedance
Frequency Response
NOTE
:
Designs
and
specifications
are
dB/W(1m)
subject
to
change
16
without notice for
dB/W(1m)
improvement.
Download PDF