OWNER’S MANUAL
Mini Hi-Fi System
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
RAD125 (RAD125, RAS125F)
P/NO : MFL67006442
RAD125-A0U_DKENHLK_ENG_6442.indd 1
2011-05-03 �� 9:21:15
2
1
Safety Information
Safety Information
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK) NO USERSERVICEABLE PARTS INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where the cord
exits the appliance. To disconnect power from the
mains, pull out the mains cord plug. When installing
the product, ensure that the plug is easily accessible.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
RAD125-A0U_DKENHLK_ENG_6442.indd 2
2011-05-03 �� 9:21:16
3
Safety Information
This device is equipped with a portable battery or
accumulator.
Unique Features
Safe way to remove the battery or the battery
from the equipment:
USB Direct Recording
Records music to your USB device.
1
Safety Information
Remove the old battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put in the appropriate
container at designated collection points. Do not
dispose of batteries or battery together with other
waste. It is recommended that you use local, free
reimbursement system batteries and accumulators.
The battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot
use it on LG players.
(Mastered/ Live File System : Disc format system for
Windows Vista)
RAD125-A0U_DKENHLK_ENG_6442.indd 3
2011-05-03 �� 9:21:16
4
Contents
1
Safety Information
1
4
Operation
2
CAUTION
13
Basic Operations
3
Unique Features
13
Other Operations
14 Programmed Playback
2
3
4
2
14Displaying file information
Preparation
6
Accessories
6
Playable file Requirement
7
Remote Control
8
Front panel
10
Rear panel
5
Connecting the speakers
11Attaching the speakers to the
unit
11
Optional Equipment Connection
11 AUX IN Connection
6
15
Radio Operations
15 Listening to the Radio
15 Presetting the Radio Stations
15 Deleting all the saved Stations
16
Installation
14 AUTO DJ playback
15 Improving poor FM reception
3
11
(ID3 TAG )
14 Turn off sound temporarily
12 USB Connection
12 Antenna Connection
Sound adjustment
16 Setting the surround mode
16
Setting the Clock
17Using your player as an alarm
Clock
17 Sleep Timer Setting
17 Dimmer
17
Advanced Operations
17Listening to music from your
external device
18 Recording to USB
7
RAD125-A0U_DKENHLK_ENG_6442.indd 4
2011-05-03 �� 9:21:16
Contents
5
5
Maintenance
19
Handling the Unit
1
19 When shipping the Unit
19 Cleaning the Unit
19 Maintaining the Unit
19
Notes on Discs
2
19 Handling Discs
19 Storing Discs
19 Cleaning Discs
3
6
Troubleshooting
20
Troubleshooting
4
7
Appendix
21
Specifications
5
6
7
RAD125-A0U_DKENHLK_ENG_6442.indd 5
2011-05-03 �� 9:21:16
6
Preparation
2
Preparation
2
Accessories
Preparation
Please check and identify the supplied
accessories.
• File extensions : “.mp3”/ “.wma”
• CD-ROM file format : ISO9660/ JOLIET
• We recommend that you use Easy-CD
Creator, which creates an ISO9660 file
system.
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive :Devices that support
USB 2.0 or USB 1.1.
FM Antenna (1)
Remote Control (1)/
Battery(1)
• The USB function of this unit does not
support all USB devices.
USB device requirement
• Devices which require additional program
installation connected to a computer, are
not supported.
AM Antenna (1)
Playable file Requirement
MP3/ WMA music file requirement
MP3/ WMA file compatibility with this unit is
limited as follows :
• Sampling frequency : within 32 kHz to
48 kHz (MP3), within 32 kHz to 48 kHz
(WMA)
• Bit rate : within 32 kbps to 320 kbps (MP3),
40 kbps to 320 kbps (WMA)
• maximum files : Under 999
RAD125-A0U_DKENHLK_ENG_6442.indd 6
• Do not extract the USB device while in
operation.
• For a large capacity USB, it may take longer
than a few minute to be searched.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB
hub, the USB device is not recognized.
• Using NTFS file system is not supported.
(Only FAT(16/32) file system is supported.)
• This unit is not supported when the total
number of files is 1 000 or more.
• External HDD, Card readers, Locked devices, or hard type USB devices are not supported.
• USB port of the unit cannot be connected
to PC. The unit can not be used as a storage
device.
2011-05-03 �� 9:21:16
Preparation
Remote Control
7
INFO : See information about your music.
MP3 files often come with tags. The tag gives
the Title, Artist, Album or Time information.
• • • • • • • • • b• • • • • • • • • •
Remote control
REPEAT : Listen to your tracks repeatedly or
randomly.
TUNING (-/+) : Tunes in the desired radio
station.
. / > (SKIP/ SEARCH)
- Searches for a section within a track
- Skips Fast backward or Forward.
B / X : Starts or pauses playback.
Preparation
a
2
x : Stops playback or recording.
b
c
d
• • • • • • • • • a• • • • • • • • •
• • • • • • • • • c• • • • • • • • • •
FOLDER · PRESET (V / v) : Searches for a
folder of MP3/ WMA files. When a CD/ USB
containing MP3/ WMA files in several folders is
being played, press FOLDER · PRESET selects
the folder you want to play. Choose a ‘preset
number’ for a radio station
PROGRAM/MEMO. : For storing radio stations
If you have saved radio stations using
PROGRAM/MEMO. , you can scroll through
them and select one.
Listens to your tracks in any order.
(MUTE) : Mutes the sound.
1 (Power) : Switches the unit ON or OFF.
VOL : Adjusts speaker volume.
SLEEP : Sets the system to turn off
automatically at a specified time. (Dimmer :
The display window will be darken by half.)
• • • • • • • • • d • • • • • • • • •
Z (Open/Close) : Opens and closes the disc
tray.
AUTO DJ : Selects the AUTO DJ mode. (For
more information refer to the page 14)
z (REC) : USB Direct Recording.
F (FUNCTION) : Selects the function and input
source.
SOUND EFFECT : Chooses sound impressions.
RAD125-A0U_DKENHLK_ENG_6442.indd 7
2011-05-03 �� 9:21:16
8
Preparation
Front panel
2
j
Preparation
a
b
k
l
c
d
m
e
n
f
o
g
h
p
i
q
r
RAD125-A0U_DKENHLK_ENG_6442.indd 8
2011-05-03 �� 9:21:16
Preparation
a 1/ ) (Power)
i Disc Tray
b TIMER
With the TIMER function you can turn CD,
USB play and TUNER reception on or off at
a desired time.
j Display window
c SET
Confirms the setting.
d STOP (x)
k FUNC.
Selects the function or input source.
l CLOCK
For setting the clock and checking the
time.
m B
/X , ST./MO.
Starts playback and pause. Selects Mono/
Stereo.
n E
Q
Chooses sound impressions.
o TUN. + / > (Skip/Search)
f ./ TUN. - (Skip/Search)
p Z (Open/Close)
g VOLUME
q A
UTO DJ
Selects the AUTO DJ mode. (For more
information refer to the page 14)
h (Rec)
Recording to USB.
RAD125-A0U_DKENHLK_ENG_6442.indd 9
2
Preparation
e BASS BLAST
Reinforces the treble, bass and surround
effect.
MP3 Opt.
This function is optimized for compressible
MP3 file. It improves the treble sound.
9
r U
SB port
You can play sound files by connecting
the USB device.
2011-05-03 �� 9:21:16
10
Preparation
Rear panel
2
Preparation
a
b
d
c
a Power cord.
c AUX IN connector
b ANTENNA (FM, AM)
d Speaker terminal
RAD125-A0U_DKENHLK_ENG_6442.indd 10
2011-05-03 �� 9:21:17
Installation
11
3
Installation
Connecting the
speakers
To connect the cable to the unit, press each
plastic finger pad to open the connection
terminals on the unit. Insert the wire and
release the finger pad.
Connect the black end of each wire to the
terminals marked - (minus) and the other end
to the terminals marked + (plus).
AUX IN Connection
3
Connect a Output of auxiliary device to the
AUX Input (L/R) Connector.
If your TV has only one output for audio
(mono), connect it to the left (white) audio jack
on the unit.
Installation
Attaching the speakers to the
unit
Optional Equipment
Connection
AUX IN Connection
Speaker connection
CAUTION
Be careful to make sure children do not put their
hands or any objects into the *speaker duct.
*Speaker duct : A hole for plentiful bass sound on
speaker cabinet (enclosure).
RAD125-A0U_DKENHLK_ENG_6442.indd 11
2011-05-03 �� 9:21:17
12
Installation
USB Connection
Antenna Connection
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the
unit.
Connect the supplied FM/AM antenna for
listening to the radio.
USB Connection
Connect the AM Loop antenna to the AM
antenna connector. (A)
Connect the FM Wire antenna to the FM
antenna connector. (F)
Antenna Connection
3
Installation
(A)
(F)
Removing the USB Device from the unit
1.Choose a different function mode or
press STOP (x) twice in a row.
2. Remove the USB device from the unit.
NOTE
• To prevent noise pickup, keep the AM Loop
antenna away from the unit and other
components.
• Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as
horizontal as possible.
RAD125-A0U_DKENHLK_ENG_6442.indd 12
2011-05-03 �� 9:21:17
Operation
13
4
Operation
Basic Operations
1. Insert the disc by Pressing Z (Open/Close)
or connect the USB device to the USB port.
2. Select the CD or USB function by pressing
FUNCTION.
3. Select a file (or track) you want to play by
pressing . or >.
Stop
Do this
Press x
Do this
Playing
repeatedly or
randomly
Press REPEAT on the
remote control repeatedly,
the display change in the
following order, RPT 1 p RPT
DIR (only MP3/ WMA) p RPT
ALL p RANDOM p OFF.
Other Operations
4
Programmed Playback
Playback
Press B/X
The program function enables you to store
your favourite files from any disc or USB device.
Pause
Press B/X
A program can contain 20 tracks.
During playback, press .
or > to go to the next
Skipping to track/file or to return to the
the next/
beginning of the current
previous track/ track/ file.
file
Press . twice briefly to
step back to the previous
track/ file.
Press and hold . or >
Searching for a
during playback and release
section within
it at the point you want to
a track
listen to.
Operation
To
To
1. Insert a CD or USB and wait for it to be
order.
2. Press PROGRAM/MEMO. on the remote
control in stop status.
3. Press . or > on the unit or on the
remote control to select a track.
4. Press PROGRAM/MEMO. again to save and
select a next track.
5. Press B/X to play the programmed music
files.
6. To clear your selection, press x,
PROGRAM/MEMO. and then x.
RAD125-A0U_DKENHLK_ENG_6442.indd 13
2011-05-03 �� 9:21:17
14
Operation
NOTE
The programs are also cleared when the disc or
USB device is removed, the unit is switched to
power off or the function is switched to others.
Displaying file information
(ID3 TAG )
While playing an MP3/ WMA file containing file
information, you can display the information
by pressing INFO..
Turn off the sound temporarily
4
Press
MUTE to mute your unit.
Operation
You can mute your unit, for example, to answer
the telephone, the “MUTE” displayed in the
display window.
AUTO DJ playback
Auto DJ blends the end of one song into
the beginning of another for seamless
playback. It equalizes volume across tracks for
uninterrupted playback.
Press AUTO DJ on the remote control or unit
repeatedly, the display changes as followings.
order, RANDOM (AUTO DJ RANDOM) p RPT
(AUTO DJ SEQUENTIAL) p (AUTO DJ OFF).
Mode
Display
window
Description
OFF
(AUTO DJ OFF)
-
RANDOM
RANDOM
(AUTO DJ
RANDOM)
The music
is played
randomly on
this mode
REPEAT
RPT
(AUTO DJ
SEQUENTIAL)
The music
is played
repeatedly on
this mode
NOTE
• Searching for a section within a track or playing
repeatedly or randomly is not supported on
the AUTO DJ mode.
• If you switch to other functions or stop the
music using x STOP on the unit(or x ENTER
on the remote control) on AUTO DJ mode,
AUTO DJ function will be disable.
• AUTO DJ function is not supported in the
music file whose length is less than 60
seconds.
• All musics are repeated continually until the
user deactivates the AUTO DJ function.
• During recording AUTO DJ function is not
available.
• If you change a disc while the AUTO
DJ function is activated the function is
deactivated.
RAD125-A0U_DKENHLK_ENG_6442.indd 14
2011-05-03 �� 9:21:17
Operation
Radio Operations
Be sure that both FM and AM aerials are
connected. (Refer to the page 12)
Listening to the Radio
1. Press FUNCTION until FM or AM appears in
the display window.
The last received station is tuned in.
2. Press and hold TUNING (-/+) for about
two seconds until the frequency indication
starts to change, then release. Scanning
stops when the Unit tunes in a station.
15
Deleting all the saved Stations
1. Press and hold PROGRAM/MEMO. for two
seconds.
“ERASE ALL” will flash up on the unit display.
2. Press PROGRAM/MEMO. to erase all saved
radio stations.
Improving poor FM reception
Press PLAY (B/X) (ST./MO.) on the unit or on
the remote control. This will change the tuner
from stereo to mono and usually improve the
reception.
or
4
Press TUNING (-/+) repeatedly.
Operation
3. Adjust the volume by rotating VOLUME on
the front panel or by pressing VOL + or - on
the remote control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure that you have turned
down the volume.
1. Press FUNCTION until FM or AM appears in
the display window.
2. Select the desired frequency by pressing
TUNING (-/+)
3. Press PROGRAM/MEMO. a preset number
will flash in the display window.
4. Press PRESET · FOLDER (v/V) to select the
preset number you want.
5. Press PROGRAM/MEMO.
The station is stored.
6. Repeat steps 2 to 5 to store other stations.
RAD125-A0U_DKENHLK_ENG_6442.indd 15
FB164
2011-05-03 �� 9:21:17
16
Operation
Sound adjustment
Setting the surround mode
This system has a number of pre-set surround
sound fields. You can select a desired sound
mode by using SOUND EFFECT on the remote
control or EQ on the unit.
The displayed items for the Equalizer may be
different depending on sound sources and
effects.
On Display
NATURAL
4
Description
You can enjoy comfortable
and natural sound
Operation
Regionally optimized
sound effect. (DANGDUT/
Local
ARABIC/ PERSIAN/ INDIA/
Specialization
REGUETON/ MERENGUE/
equalizer
SALSA/ SAMBA/ CUMBIA/
AFRO HIPHOP)
AUTO EQ
Realizes the sound equalizer
that is the most similar to the
genre of which is included in
the MP3 ID3 tag of song files.
POP
CLASSIC
JAZZ
ROCK
This program lends an
enthusiastic atmosphere to
the sound, giving you the
feeling you are at an actual
rock pop, jazz or classic
concert.
MP3 - - OPT
This function is optimized
for compressible MP3 file. It
improves the treble sound.
BASS
LOUDNESS
During playback, Reinforces
the treble, bass and surround
sound effect.
On Display
Description
VIRTUAL
You can enjoy more virtual
surround sound.
BYPASS
You can enjoy the sound
without equalizer effect.
NOTE
• In some of surround modes, some speakers
maybe no sound or low sound, it depends on
the mode of surround and the source of audio,
it is not defective.
• You may need resetting the surround mode,
after switch the input, sometimes even after
the sound track changed.
• BASS BLAST, MP3 Opt. button on the unit is
direct select the MP3 -- OPT or BASS sound.
Setting the Clock
1. Turn the power on.
2. Press CLOCK for at least 2 seconds
3. Choose from either, Using . or >.
- AM 12:00 (for an AM and PM display) or
0:00 (for a 24 hour display)
4. Press SET for confirm your selection.
5. Select the hours. Using . or >.
6. Press SET.
7. Select the minutes, using . or >.
8. Press SET.
Improves bass and treble
sound.
RAD125-A0U_DKENHLK_ENG_6442.indd 16
2011-05-03 �� 9:21:17
Operation
Using your player as an alarm
clock
1. Turn the power on.
2. Press TIMER. Each functions flashes.
3. Press SET when the function you want to
be woken by is showing.
4. “ON TIME” will be displayed. This is where
you set the time you want the alarm to
start. Use . or > to change the hours
and minutes and SET to save.
5. The “OFF TIME” will be displayed. This is
where you set the time you want the
function to stop.
17
Sleep Timer Setting
Press SLEEP one or more times to select delay
time between 10 and 180 minutes, after the
unit will turn off.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then
press SLEEP once again while “SLEEP 10” is
displayed.
NOTE
You can check the remaining time before the
unit turns off.
Press SLEEP. The remaining time appears in the
display window.
6. Use . or > to change the hours and
minutes and press SET to save.
8. Press TIMER button 2 times. You can check
the setting status.
4
Dimmer
Press SLEEP once. The display window will
be darken by half. To cancel it, press SLEEP
repeatedly until dim off.
Advanced Operations
Operation
7. You will be shown the volume (VOL) you
want to be woken by. Use . or > to
change the volume and SET to save. The
clock icon “ ” shows that the alarm is set.
NOTE
• If you set the clock time, you can check the
time by pressing CLOCK even when the player
is turned off.
• If you set the clock time and alarm, you can
check the alarm icon “ ” by pressing CLOCK
even when the unit is turned off.
• If you set the clock time and alarm, you
can check the alarm icon “ ”and setting
information by pressing TIMER even when the
unit is turned off.
Listening to music from your
external device
The unit can be used to play the music from
many types of external device.
(Refer to the page 11)
1. Connect the external device to the AUX IN
connector of the unit.
2 Turn the power on by pressing 1/ )
(Power).
3 Select the AUX function by pressing
FUNCTION.
4 Turn the external device and start it playing.
RAD125-A0U_DKENHLK_ENG_6442.indd 17
2011-05-03 �� 9:21:18
18
Operation
Recording to USB
1. Connect the USB device to the unit.
2. Select a CD function by pressing
FUNCTION.
One track recording - You can record to USB
after play you want file.
• You can check the recording percentage rate
for the USB record on the display window
during the recording. (MP3/ WMA CD Only)
• During recording MP3/ WMA, there is no
sound.
All tracks recording - You can record to USB
after stop
• When you stop recording during playback, the
file that has been recorded at that time will be
stored. (AUDIO CD Only)
Program list recording - After moving a to
the programmed list and you can record it
to USB
• Do not remove the USB device or turn off
the unit during USB recording. If not, an
incomplete file may be made and not deleted
on PC.
3 Start the recording by pressing
on the
unit or z REC on the remote control.
4 To stop recording, press x STOP
4
Pausing recording
Operation
NOTE
During recording, press to pause recording.
Press z REC to continue recording.
(Only Radio/ AUX)
• If USB recording does not work, the message
like “NO USB”, “ERROR”, “FULL” or “NO REC” is
displayed on the display window.
• Multi card reader device or External HDD can
not be used for USB recording.
• A file is recorded by about 512 Mbyte when
you record for a long term.
• When you stop recording during playback, the
file will not be stored.
• You may not store more than 999 files.
To select recording bit rate and speed
1. Press on the unit or z REC on the
remote control for longer than 3 seconds.
2. Use . or > on the unit or remote
control to select the bit rate.
• On radio or portable mode, you cannot set the
recording speed.
• It’ll be stored as follows.
AUDIO CD
MP3/ WMA
The other
source
3. Press on the unit or z REC on the
remote control again to select the recording
speed.
4. Use . or > on the unit or remote
control to select a desired recording speed.
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press on the unit or z REC on the
remote control to finish the setting.
RAD125-A0U_DKENHLK_ENG_6442.indd 18
The making of unauthorized copies of copyprotected material, including computer programs,
files, broadcasts and sound recordings, may be
an infringement of copyrights and constitute a
criminal offense. This equipment should not be
used for such purposes.
Be responsible
Respect copyrights
2011-05-03 �� 9:21:18
Maintenance
19
5
Maintenance
Handling the Unit
When shipping the Unit
Please save the original shipping carton and
packing materials. If you need to ship the unit,
for maximum protection, re-pack the unit as it
was originally packed at the factory.
Keeping the exterior surfaces
clean
• Do not use volatile liquids such as
insecticide spray near the unit.
Cleaning the Unit
To clean the unit, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth
lightly moistened with a mild detergent
solution.
Do not use strong solvents such as alcohol,
benzene, or thinner, as these might damage
the surface of the unit.
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
Cleaning Discs
5
Maintenance
• Wiping with strong pressure may damage
the surface. Do not leave rubber or plastic
products in contact with the unit for a long
period of time.
diminished. For details, please contact your
nearest authorized service center.
Fingerprints and dust on the disc can cause
poor picture quality and sound distortion.
Before playing, clean the disc with a clean
cloth. Wipe the disc from the center out.
Do not use strong solvents such as alcohol,
benzene, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl records.
Maintaining the Unit
The unit is a high-tech, precision device. If
the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality could be
RAD125-A0U_DKENHLK_ENG_6442.indd 19
2011-05-03 �� 9:21:18
20
Troubleshooting
6
Troubleshooting
PROBLEM
No Power.
No sound
The unit does
not start
playback.
CAUSE
Plug in the power cord.
Check whether electricity failed.
Check the condition by operating other
electronic devices.
Check whether you select right function.
Press FUNCTION and check the selected
function.
If not, connect speaker cables correctly.
Speaker cables connected correctly.
An unplayable disc is inserted.
Insert a playable disc.
No disc is inserted.
Insert a disc.
The disc is dirty.
Clean the disc. (Refer to the 19 page)
The disc is inserted upside down.
Place the disc with the label or printed side
facing upwards.
The antenna is positioned or connected poorly.
Radio stations
cannot be tuned
The signal strength of the radio station is too weak.
in properly.
6
Troubleshooting
The remote
control does not
work properly.
CORRECTION
The power cord is not plugged in.
Connect the antenna securely.
Tune to the station manually.
No stations have been preset or preset stations
have been cleared (when tuning by scanning preset
channels).
Preset some radio stations, see page 15 for
details.
The remote control is too far from the unit.
Operate the remote control within about 23 ft
(7m).
There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
The battery in the remote control is exhausted.
Replace the battery with new one.
RAD125-A0U_DKENHLK_ENG_6442.indd 20
2011-05-03 �� 9:21:18
Appendix
21
7
Appendix
Specifications
General
Power supply Refer to main label.
Power consumption Refer to main label.
Net Weight 3.5 kg
External dimensions (W x H x D) 202 x 307 x 278 mm
Bus Power Supply (USB)
DC 5 V
0.5 A
Operating conditions Temperature 5 °C to 35 °C,
Operation status: Horizontal
Operating humidity 5 % to 85 %
Laser Semiconductor laser, wavelength 650 nm
Tuner FM/AM
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
128 kHz
522 to 1 620 kHz, 520 to 1 710 kHz or
522 to 1 710 kHz
45 kHz
Appendix
FM Tuning Range FM Intermediate Frequency
AM Tuning Range
AM Intermediate Frequency Amplifier
Output Power
60 W + 60 W (4 Ω at 1 kHz, THD 10 %)
CD
Frequency Response Signal-to-noise ratio Dynamic range RAD125-A0U_DKENHLK_ENG_6442.indd 21
40 Hz to 20,000 Hz
75 dB
80 dB
7
2011-05-03 �� 9:21:18
22
Appendix
Specifications
Speakers
Type
Impedance Rated Input Power Max. Input Power
Net Dimensions (W x H x D)
Net Weight
Front Speaker
2 Way 2 Speaker
4Ω
60 W
120 W
210 x 310 x 235 mm
2.6 kg
Designs and specifications are subject to change without prior notice.
Appendix
7
RAD125-A0U_DKENHLK_ENG_6442.indd 22
2011-05-03 �� 9:21:18
RAD125-A0U_DKENHLK_ENG_6442.indd 23
2011-05-03 �� 9:21:18
Download PDF

advertising