LG | 44NB2RNB | Owner's Manual | LG 44NB2RNB Owner’s Manual

LG 44NB2RNB Owner’s Manual
Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
cover
require
and
quote this infor-
service.
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
On screen language selection (option)
7
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine tuning / Programme edit
Favourite programme
Calling the programme table
9
Setting
Picture adjustment
PSM (Picture Status Memory)
XD / VM (Velocity Modulation)
Picture adjustment / Auto convergence
Convergence (option) / Picture format
Turbo picture selection (option)
14
(option)
Sound adjustment
SSM (Sound Status Memory)
Sound adjustment / X-WAVE (Wireless Sound)
Turbo sound selection (option)
Sound output selection / Stereo/Dual reception
NICAM reception (option)
18
(option)
21
Time setting
Clock / On/Off time
Auto sleep
Other functions
TV and AV modes / Auto AV switching
PIP Picture Source Selection (option)
Child lock / Sleep timer
PIP
22
(option)
operation (option)
24
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
25
Connection of external equipment
Aerial socket
Euro scart sockets (option)
Audio/Video in/out sockets (option)
S-Video/Audio in sockets (S-AV) (option)
Component in sockets
Monitor out sockets
28
Troubleshooting
2
check list
31
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms
ial and mains
or
powercuts, please pull
out the aer-
plugs.
Warning
To prevent fire
moisture.
Do not
or
shock hazard, do not expose the set to rain
place anything containing liquid on top
fire or could give an electric shock.
or
of the set, this may
cause a
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
For the best
cover.
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
the
set is
in
a position to allow a free flow
openings on the back cover.
place the set on a sloping or unstable
placed
of air. Do not
cover
the ventilation
Do not
on
the bottom of the set may
cause
it to
When displaying still pictures such as
mat, PIP display, and station label for
be persisted on the screen.
move
area as
the casters
and to be
damaged.
videogames, 4:3 picture fora long time, the image may
Manufactured under license from Dolby Laboratories. "Dolby"
and the double-D symbol are trademarks of Dolby
Laboratories. (option)
3
Location and function of controls
POWER
1
TV/AV
MULTIMEDIA
2
TURBO
SOUND
PICTURE
13 Remote control handset
3
PIP
TEXT
4
PR-
PR+
SWAP
MENU
INPUT
PR
MUTE
OK
14 Before you use the remote control handset, please install the batteries. See the next page.
15
1.
POWER
switches the set on from standby or off to standby.
16
5
VOL
12
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
2.
TV/AV
selects TV or AV mode.
switches the set on from
3.
TURBO SOUND BUTTON
selects Turbo sound.
4.
PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
SCAN
switches on or off the programme scan mode 12 sub
5.
MENU
selects
VOL
6
PR
123
456
7
7
8
9
PSM
0
SSM
17
8
POSITION
SCAN
STILL
18
SIZE
MIX
TIME
SLEEP
REVEAL
M
?
LIST
19
9
10
I/II
Q.VIEW
STOP
P/STILL
11
REW
PLAY
ARC
REC
20
21
FF
6.
TELETEXT /
(With
PIP)
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Up/Down)
adjusts the volume.
adjusts
PICTURE
PIP
4
PR-
menu
SWAP
MENU
INPUT
PR
8
9
PSM
0
SSM
POSITION
SCAN
STILL
SLEEP
LIST
Q.VIEW
ARC
SIZE
I/II
(Without TELETEXT/With PIP)
4
or
7.
NUMBER BUTTONS
switches the set on from
8.
PSM (Picture Status
recalls your preferred
9.
SLEEP
sets the
MUTE
5
7
settings.
accepts your selection
PR+
pictures.
a menu.
OK
SOUND
standby.
sleep
displays
the current mode.
standby or directly
Memory)
picture setting.
select
a
number.
timer.
10. I/II
selects the language during dual language broadcast.
selects the sound output (option).
11. VCR BUTTONS
control a LG video cassette recorder.
Location and function of controls
12. MULTIMEDIA
selects Component 1
or
POWER
Component 2 modes.
1
TV/AV
13. TURBO PICTURE BUTTON
selects Turbo picture.
2
MULTIMEDIA
TURBO
SOUND
PICTURE
12
13
3
14. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
MENU
15. SWAP
selects
a
previously viewed programme.
favourite programme.
VOL
16. MUTE
switches the sound
on or
18. STILL
freezes motion of the
picture.
the programme table.
VOL
picture
1
2
3
4
5
6
7
8
9
PSM
0
SSM
17
8
SLEEP
format.
LIST
STILL
Q.VIEW
ARC
19
18
9
I/II
21. Q.VIEW
20
21
10
returns to the
a
viewed programme.
favourite programme.
previously
STOP
11
* : No function
COLOURED BUTTONS
TELETEXT
OK
PR
19. LIST
selects
16
off.
7
20. ARC
select your desired
MUTE
6
17. SSM (Sound Status Memory)
recalls your preferred sound setting.
displays
PR
5
returns to the
models)
or
: These buttons
programme edit.
are
used for teletext
REW
P/STILL
REC
PLAY
FF
(only
Note : In teletext mode, the PR +/-, SWAP and INPUT buttons
used for teletext function.
are
(Without PIP/TELETEXT)
Battery
installation
SOUND
PICTURE
TEXT
The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
14
-
MENU
PR
MUTE
5
7
PSM
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
INDEX
SIZE
TIME
I/II
9
SSM
0
UPDATE
MIX
6
8
SLEEP
HOLD
REVEAL
M
Q.VIEW
?
LIST
ARC
(With TELETEXT/Without PIP)
5
Location and function of controls
Front
panel
44NB2 series
?
TV/AV
2
MENU
OK
7
5
6
8
VOL
1
S-VIDEOL/MN
AUDIO
ON/OFF
3
R
AV 3
PR
4
(Side panel)
1.
MAIN POWER
switches the set
on or
7.
TV/AV
selects TV or AV mode.
clears the menu / text from the screen.
switches the set on from standby.
8.
AUDIO/VIDEO IN SOCKETS (AV3)
Connect the audio/video out sockets of external equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-AV)
Connect the video out socket of an S-VIDEO
VCR to the S-VIDEO socket.
Connect the audio out sockets of the S-VIDEO
VCR to the audio sockets as in AV3.
off.
2.
REMOTE CONTROL SENSOR
3.
F / G (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
4.
5.
6.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
mode.
dims when the set is switched on.
MENU
selects
a menu.
OK
accepts your selection
mode.
6
standby
or
displays
the current
*
CASTERS
(on the bottom) (option)
easily.
turn and move the set
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E TV/AV,
MULTIMEDIA or NUMBER buttons on the remote control handset
to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
,
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
POWER
TV/AV
Programme
selection
You can select
buttons.
a
Volume
SOUND
programme number with the D / E
or
NUMBER
adjustment
Press the F / G button to
MULTIMEDIA
TURBO
SWAP
adjust
the volume.
MENU
PR
MUTE
Quick view
Press the SWAP
were
Note
or
Q.VIEW button to view the last programme you
watching.
VOL
OK
VOL
This function works only when Favourite programme is
set to Off. Otherwise each press of this button will select a stored
favorite programme.
:
Mute function
PR
Press the MUTE button. The sound is switched off and the
appears.
You can cancel it
SOUND button.
by pressing
the MUTE, F / G
,
display
1
2
3
SSM, I/II, TURBO
4
5
6
7
8
9
0
SSM
Auto Demonstration
To review all the menus programmed in the set, press the OK button of the front panel control for about 10 seconds. To stop auto
demonstration, press any button of the front panel control or
POWER button of the remote control.
On
screen
language
selection
The
menu can be displayed on the
guage. First select your language.
1.
2.
3.
I/II
(option)
screen
Q.VIEW
in your desired lan-
Press the MENU button and then D / E button to select the
Special
Press
menu.
the
G
button
and
then
D
/
E
button
to
select
Language.
Press the G button and then D / E button to select your desired
language.
4.
All the on screen displays will appear in the selected language.
Press the OK or F button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
viewing.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
Press the MENU button and then D / E button to display each menu.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down menu.
Change the setting of an item in the sub or pull-down menu with
F/Gor D / E
You can move to the higher level menu by pressing the F button
and to move to the lower level menu by pressing the G button.
Note :
In the teletext mode, menus are not displayed.
a.
b. In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
In some models, the Language, X-WAVE, Input (
c.
) will
1.
2.
3.
4.
.
not
d.
display.
In some models, the Auto convergence will not display,
the Convergence will display in the Picture menu.
Auto programme
Station
MENU
PR
VOL
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
System
StorageOfrom
{
NormalOsearch
TurboOsearch
{
{
OBG
OOI
ODK
OOM
VOL
()O}{OOKOMENU
()O}{O OKOMENU
Station
menu
Manual programme
Picture
PR
PSM
XD
VM
Contrast
{
{
Brightness
Colour
{
Sharpness
Convergence
{
{
Storage
System
Channel
{
{
{
Fine
{
{
Search
Name
Booster
{
{
{
{
{
()O}{O OKOMENU
()O}{O OKOMENU
Picture
menu
Programme
Sound
SSM
AVL
DBS
Balance
{
X-WAVE
edit
OO0OOCO03
OO5OOSO69
{
O1OOCO03OOO6OOSO17
{
O2OOCO12OOO7OOSO22
{
O3OOSO66OOO8OOCO09
{
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
()}{O OKOMENU
()O}{OOKOMENU
Sound
menu
Time
Clock
{
{
OffOtime
OnOtime
{
{
AutoOsleep
()O}{OOKOMENU
T ime
menu
Special
Language
Input
InputOOO(
{
{
)
ChildOlock
{
{
()O}{O OKOMENU
Special
TV programme
8
{
menu
2
only
Setting up
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
some
models up to 200 TV stations
Auto programme
can
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
Station
Menu
{
{
be stored.
tuning
()O}{O OKOMENU
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Auto pro-
gramme.
3.
Press the G button to
display
the Auto programme
menu.
Auto programme
System
StorageOfrom
{
NormalOsearch
TurboOsearch
{
{
{
OBG
OOI
ODK
OOM
()O}{O OKOMENU
MENU
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
5.
Press the OK or F button.
6.
Press the D / E button to select Storage from.
7.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
8.
Press the OK button.
9.
Press the D / E button to select Normal or Turbo search.
Option: In some models, you can only select Start.
Note :
a.
Turbo search is further faster than Normal search and in
some models, these searches will automatically store all receivable stations.
b.
If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
PR
4.
Auto programme
VOL
OK
VOL
PR
1
2
3
4
5
6
7
8
9
0
Auto programme
System
StorageOfrom
{
NormalOsearch
TurboOsearch
{
{
OCO01O(BG)
{
System
StorageOfrom
{
NormalOsearch
TurboOsearch
{
77O7O7O736%
{
{
OCO01O(BG)
77O7O7O736%
MENU
MENU
(Normal search)
10. Press the G button to
All receivable stations
(Turbo search)
begin
are
auto
stored.
programming.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
9
Setting up
Station
Station
Menu
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
()O}{O OKOMENU
{
{
TV stations
Manual programme
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
3.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Manual
programme.
Press the G button to display the Manual programme
menu.
Manual programme
Storage
System
{
{
Channel
{
Fine
{
Search
Name
Booster
{
2
{
{
()O}{O OKOMENU
MENU
VOL
4.
5.
PR
OK
VOL
6.
7.
8.
PR
1
2
3
4
5
6
7
8
9
0
9.
10.
11.
12.
13.
14.
15.
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number with the F / G button or NUMBER
buttons on the Storage pull-down menu. Any number under 10
is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or
'005') for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF or
Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
Name
Booster
{
{
{
{{{{
{
Stored
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
10
TV stations
Setting up
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
2.
3.
4.
5.
6.
7.
Station
1 to 3.
Press the D / E button to select Name.
Press the G button on the Name pull-down menu.
Press the D button. You can use a blank, +, -, the numeric 0 to
9 and the alphabet A to Z.
With the E button you can select in the opposite direction.
Select the position by pressing the F / G button and then make
your choice of the second character, and so on.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
Station
Menu
{
()O}{O OKOMENU
viewing.
Booster (option)
In some models, Booster is an optional function.
Booster can perform this function.
Only
a
set with
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
1.
2.
3.
4.
5.
6.
PR
Repeat
Press
Press
Press
down
Press
VOL
OK
VOL
pull-
menu.
the OK button.
the MENU button to return to normal TV
Repeatedly press
viewing.
Fine
PR
tuning
Normally
1.
2.
3.
the 'Manual programme tuning' steps 1 to 3.
the D / E button to select Booster.
the G button.
the D / E button to select On or Off on the Booster
MENU
fine
tuning
is
only necessary
if
reception
is poor.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Fine.
Press the G button.
Repeat
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
Name
Booster
{
{
{{{
{
{
}{O OKOMENU
4.
5.
6.
Press the F / G button to fine tune for the best picture and
sound on the Fine pull-down menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will be
ber during programme selection.
indicated
by
a
yellow
num-
11
Setting up
Station
Station
Menu
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
()O}{O OKOMENU
{
{
Programme
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select
Programme edit.
Press the G button to display the Programme edit menu.
Programme
edit
OO0OOCO03
OO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
()}{O OKOMENU
Deleting
MENU
1.
PR
2.
VOL
VOL
a programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Copying
1.
2.
a programme
Select a programme to be copied with the D / E orF/Gbutton.
Press the GREEN button.
All the following programmes are shifted down one position.
Moving
PR
1.
1
2
3
4
5
6
7
8
9
2.
3.
4.
a programme
Select a programme to be moved with the D / E orF/Gbutton.
Press the YELLOW button.
Move the programme to the desired programme number with
the D / E or F / G button.
Press the YELLOW button again to release this function.
0
Programme
edit
OO0OOCO03
OO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
()}{O MENU
a programme number
Select a programme number to be skipped with the D / E orF/G
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
Skipping
1.
2.
3.
Repeatedly press
12
the MENU button to return to normal TV
viewing.
Setting up
TV stations
Favourite programme
Station
This function lets you select your favourite programmes
1.
2.
directly.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Favourite
programme.
3.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
Station
Menu
{
{
()O}{O OKOMENU
Press the G button.
Favourite programme
{
ProgrammeOedit
FavouriteOprogramme
{
Off
AutoOprogramme
ManualOprogramme
{
56O CO 05
{
}{O()OOKOMENU
4.
5.
6.
7.
8.
9.
Press the F / G button to select On or Off.
Press the D / E button to select
-----.
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
To store another programme, repeat steps 5 to 6.
You can store up to 8 programmes.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
--
viewing.
Repeatedly
MENU
VOL
press the SWAP
favourite programmes.
Calling
SWAP
PR
OK
VOL
Q.VIEW button to select stored
or
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
PR
1
2
3
4
5
6
7
8
9
Displaying
0
Station
OO0OOCO03
OO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
LIST
()}{O OKOMENU
Q.VIEW
Note :
a.
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
Select a programme with the D / E orF/Gbutton.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
Paging through a programme table
are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
Repeatedly press the MENU button to return to normal TV viewing.
There
13
Picture
Picture
Picture
Menu
PSM
XD
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
()O}{OOKOMENU
PSM
{
adjustment
(Picture Status Memory)
{
{
1.
2.
3.
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select PSM.
Press the G button and then D / E button to select a picture
setting on the PSM pull-down menu.
Picture
PSM
XD
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
Dynamic
Standard
{
Mild
{
Game
User
{
()O}OOKOMENU
MENU
Press the OK
5.
Repeatedly press
viewing.
You
PR
OK
VOL
button.
the MENU button to return to normal TV
a desired picture (Dynamic, Standard,
User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for optimum picture reproduction at the factory and cannot be
changed.
can
also recall
Mild, Game
VOL
or F
4.
or
XD
PR
You
can enjoy the vivid and hi-definition picture
Digital Reality processor technology.
1.
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select XD.
Press the G button and then D / E button to select On or Off
on the XD pull-down menu.
2.
PSM
3.
or F
4.
Press the OK
5.
Repeatedly press
viewing.
VM
button.
the MENU button to return to normal TV
(Velocity Modulation)
This is the function to enhance the
1.
2.
3.
with LG's excellent
sharpness
of
image edge.
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select VM.
Press the G button and then F / G button to adjust the vm.
Picture
PSM
XD
VM
Contrast
{
Brightness
{
Colour
{
{
Sharpness
Convergence
{
{
1
{
{
}{OOKOMENU
4.
5.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
14
Picture
Picture
You
can
ness
1.
2.
adjustment
Picture
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
PSM
XD
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
{
Picture
Menu
{
()O}{O OKOMENU
Picture
PSM
XD
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
{
50
{
()O}{OOKOMENU
3.
Press the G button and then F / G button to make
the each sub menu.
Press the OK button to store it for the
adjustments
4.
appropriate
on
picture
Contrast
user.
VOL
}{O()OOKOMENU
5.
Repeatedly press
viewing.
MENU
PR
80
OK
VOL
the MENU button to return to normal TV
Auto convergence
(option)
PR
This function enables you to
adjust the colour convergence of screen
automatically during receiving the signals. When the set is first
installed or it is relocated, the picture may be unstable with three
colour ghosts (red, green, blue). This problem can be solved by
adjusting the colour convergence.
1.
Press the MENU button and then D
Picture menu.
/ E
button to select the
Picture
PSM
XD
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
AutoOconvergence
{
{
{
{
{
()O}{O OKOMENU
2.
Press the G button and then D / E button to select Auto con-
vergence.
3.
Press the G button to
adjust
the colour convergence automati-
cally.
Note :
a.
The operating point colour will change in the order of 'blue-greenred'.
b. Please make sure the surrounding illumination where the TV is
situated remains dark otherwise the screen will become unstable or the message Ensure lights are dimmed sufficiently" will be displayed on screen after Auto convergence is completed. Auto convergence will then have to be operated again.
"
15
Picture
Picture
Picture
Menu
PSM
XD
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
()O}{OOKOMENU
{
{
{
{
adjustment
Convergence (option)
This function enables you to adjust the colour convergence of
screen all area or 9 points during receiving the signals. When the
set is first installed or it is relocated, the picture may be unstable
with three colour ghosts (red, green, blue). This problem can be
solved by adjusting the colour convergence.
1.
2.
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E
button to select
Convergence.
TV/AV
3.
Press the G button and then D / E button to select 1
or 9
(9 point convergence).
(All
point convergence)
Picture
MENU
PR
PSM
XD
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
{
{
1
{
9
{
()O}{O OKOMENU
4.
VOL
OK
VOL
Press the G button.
The display DE FG is selected in red.
If the display + are unstable with three colour
convergence needs to be adjusted.
ghosts,
the colour
PR
()O}{O1-9OTV/AVOOKOMENU
()O}{OTV/AVOOKOMENU
If the
display
+
is white, colour convergence
adjustment
is not
necessary.
5.
6.
7.
Press the TV/AV button to select the display DE FGinblue.
: Press the number (1 to 9) button to select
Only selection 9
the position you want to adjust the convergence.
Press the D / E / F / G button to superimpose the display +
(red or blue) with the green one.
The display + is moved to the left, right, up or down by pressing
the D / E / F / G button.
If the red and blue display + are superimposed with the green
one, the display + will be changed to yellow or cyan.
9. Press the OK button to store it for the convergence.
10. Repeatedly press the MENU button to return to normal TV view8.
ing.
Note :
a.
Press the MENU button to cancel the adjustment before saving.
b. If the picture needs to be adjusted more after 1
(All point
convergence) adjustment, you can adjust the 9
(9 point convergence) for the position you want to adjust.
c.
Adjust the convergence according to a broadcasting system
(50Hz or 60Hz) each.
16
Picture
adjustment
Picture format
You can watch TV in various picture formats; 4:3, 16:9.
In some models, you can watch TV in various picture formats; 16:9,
14:9, Zoom, Auto and 4:3.
Repeatedly press the ARC button to select your desired picture format.
4:3
This
picture
16:9
You can
format is 4 to 3 of
general
enjoy the cinema (the picture
through the 16:9 mode.
TV.
format of
16:9)
or
general
TV
programme
TURBO
PICTURE
14:9
The screen 14:9 is viewed just like that but the screen 4:3 is magnified to the upper / lower and left / right so that the screen 14:9 is
full.
You can move the screen up or down with D / E button.
PR
Zoom
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower and left/right sides
so that the screen 16:9 is full. The bottom and top of the picture
may be lost.
You can move the screen up or down with D / E button.
Auto
When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent.
Note : In the double window and
available.
scan
PR
mode, ARC function isn't
PSM
Turbo
picture
selection
(option)
When this function is on, the picture will be more brilliant and distinct than normal. Repeatedly press the TURBO PICTURE button
to switch on or off.
ARC
(Turbo Picture off)
(Turbo Picture on)
Note : If you press the PSM button with the Turbo picture function,
the Turbo picture function is automatically switched off.
17
Sound
SSM
Sound
Sound
Menu
SSM
AVL
DBS
Balance
X-WAVE
adjustment
(Sound Status Memory)
{
{
{
{
{
You
can
select your
preferred sound setting; Dolby Virtual (option),
Speech and you can also adjust the sound
equalizer.
Flat, Music, Movie
frequency
of the
or
()O}{O OKOMENU
1.
2.
3.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select SSM.
Press the G button and then D / E button to select a sound setting on the SSM pull-down menu.
Sound
SSM
AVL
DBS
Balance
X-WAVE
{
DolbyOVirtual
{
Flat
{
{
Music
Movie
{
Speech
User
{
()O}OOKOMENU
MENU
PR
Dolby Virtual (option)
Dolby Virtual lets you experience panoramic
VOL
OK
effects of sound.
VOL
0.1O0.5O1.5O5.0O10OkHz
()O}{O OKOMENU
PR
Sound Frequency Adjustment
a. Press the G button in User to display the User sub menu.
b. Select a sound band by pressing the F / G button.
c. Select appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
SSM
Repeatedly press
You
the MENU button to return to normal TV
(Dolby Virtual (option),
User) with SSM button on the
control. The sound Dolby Virtual (option), Flat, Music,
and Speech are programmed for optimum sound reproat the factory and cannot be changed.
can
also recall
a
desired sound
Flat, Music, Movie, Speech
remote
Movie
duction
Note
:
viewing.
or
If you press the SSM button after
ment on the
making appropriate adjust-
User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Dolby Virtual (option), Flat, Music, Movie or Speech.
18
Sound
Sound
You
adjustment
Sound
adjustment
adjust AVL (Auto Volume Leveler), DBS (Dynamic Bass
Sound), TV Speaker or balance. AVL automatically keeps on an
equal volume level even if you change programmes. If you switch
DBS to on, the set creates a dynamic bass sound. The Turbo sound
can
creates
1.
2.
an
all around sound
in
as
a
concert hall.
SSM
AVL
DBS
Balance
X-WAVE
{
{
{
Sound
Menu
{
{
()O}{O OKOMENU
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL, DBS, or Balance.
Sound
SSM
{
AVL
{
DBS
{
Balance
X-WAVE
{
TURBO
SOUND
0
{
()O}{O OKOMENU
In the AVL, DBS and
ton to select On
3.
or
on
the Sound menu, press the D / E but-
Off.
MENU
viewing.
Note : In the
available.
X-WAVE
You
1.
2.
3.
PR
In the Balance on the Sound menu, make desired adjustment
with the F / G button on the Balance pull-down menu.
Repeatedly press the MENU button to return to normal TV
can
VOL
Dolby
VOL
Virtual mode, AVL and DBS function isn't
(Wireless Sound) (option)
also listen to the sound
through
the FM receiver.
PR
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select X-WAVE.
Press the G button and then D / E button to tune in a frequency on the X-WAVE pull-down menu.
Sound
SSM
{
87.7OMHz
AVL
{
DBS
{
Balance
{
X-WAVE
{
87.9OMHz
88.1OMHz
88.3OMHz
88.5OMHz
88.7OMHz
88.9OMHz
Off
106.7OMHz
or
106.9OMHz
107.1OMHz
107.3OMHz
107.5OMHz
107.7OMHz
107.9OMHz
Off
()O}{O OKOMENU
4.
Match the TV's
frequency
Turbo sound selection
and the FM receiver's.
(option)
When this function is on, the sound will be more emphasized and
amplified than normal.
Repeatedly press the TURBO SOUND button to switch on or off.
(Turbo
Sound
off)
(Turbo
Sound
on)
19
Sound
adjustment
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
:
speaker.
Audio signal
speakers.
Audio signal
speakers.
Stereo/Dual
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button
twice again.
selection for dual language broadcast
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
Language
If
a
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
I/II
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Commanding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
20
Time
setting
Clock
1.
2.
3.
Time
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Clock.
Press the G button and then D / E button to adjust the hour.
Clock
{
{
OffOtime
OnOtime
{
Time
Menu
{
AutoOsleep
Time
C lock
{
OffOtime
OnOtime
{
AutoOsleep
{
()O}{O OKOMENU
-i-o:o-i-
{
()O}{OOKOMENU
4.
5.
6.
Press the G button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
On/Off time
By using this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
function.
1.
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
MENU
VOL
PR
OK
VOL
Time
Clock
{
OffOtime
OnOtime
{
{
-i-o:o-i-
AutoOsleep
{
Pr
1
VOLOOO30
Off
PR
()O}{OOKOMENU
4.
5.
6.
7.
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
Note :
a.
On time function works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset.
d.
Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
e.
Once the on or off time is set, these functions operate daily at
the preset time.
Auto
sleep
If you select On on the Auto Sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
4.
5.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto Sleep.
Press the G button and then D / E button to select On or Off
on the Auto Sleep pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
21
Other functions
TV and AV modes
Special
Special
Menu
Inputs
OOO
O
can
be set for TV
cassette recorder
or
(VCR),
AV mode. AV mode is used when
other
or
equipment
a video
is connected to the
set.
Note : When a VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external equipment' section.
OOO
1.
Press the MENU button and then D / E
Special
2.
TV/AV
3.
button to select the
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1,
AV2, AV3, AV4 (option), COMPONENT 1 or COMPONENT 2
on
the
Input pull-down
menu.
Special
{
Input
TV
OOO
O
MENU
PR
OOO
VOL
PR
1
2
3
4
5
6
7
8
9
4.
0
: VCR connected to the Euro scart socket or phone jack of
the set
AV2 : VCR connected to the Euro scart socket or phone jack of
the set
AV3 : VCR connected to the AV3 sockets on the set
AV4 : VCR connected to the AV4 sockets on the set (option)
COMPONENT1/2 : COMPONENT connected to the COMPONENT1/2 sockets on the back
Repeatedly press the MENU button to return to normal TV
AV1
viewing.
Alternatively you
can
select the TV
or
AV mode
by pressing
the
TV/AV button.
In AV mode, to return to TV mode, press the D / E
or
NUMBER but-
tons.
Auto AV
switching (option)
If your VCR outputs switching voltage when connected to the Euro
scart socket, the set will switch to AV1 or AV2 mode automatically.
But if you want to keep on watching TV mode, press the D / E
NUMBER buttons.
Press the TV/AV button to return to AV modes.
22
or
Other functions
PIP Picture Source Selection
1.
2.
3.
(option)
Press the MENU button and then D / E
Special
button to select the
Special
{
{
Language
Input
InputOOO(
)
ChildOlock
menu.
Press the G button and then D / E button to select Input (
).
Press the G button and then D / E button to select TV, AV1,
AV2, AV3 or AV4 (option).
{
Special
Menu
{
()O}{O OKOMENU
Special
Language
Input
InputOOO(
ChildOlock
{
{
)
{
{
TV
AV1
AV2
AV3
AV4
()O}OOKOMENU
4.
5.
or F
Press the OK
Repeatedly press
viewing.
button.
the MENU button to return to normal TV
Child lock
MENU
PR
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized view-
ing.
VOL
1.
2.
3.
4.
5.
Press the MENU button and then D / E
Special
OK
VOL
button to select the
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off
on the Child lock pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
PR
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The
any button
Child lock on will not appear on the screen if
the front panel is pressed while displaying the
display
on
menus.
Sleep
timer
SLEEP
You don't have to remember to switch the set off before you go to
bed. The sleep timer automatically switches the set to standby after
the preset time elapses.
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
---
Note :
a.
To view the
remaining sleep time, press
the SLEEP button
once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
When you switch the set off, the set releases the preset sleep
time.
---
c.
23
PIP
operation (option)
Option
PIP is
:
an
optional function,
so
that
the set with PIP function
only
can
operate.
PIP
(Picture
in
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP button to switch on the sub
Press this button again to switch it off.
Input
mode selection for sub
Press the INPUT button to select the
picture
input
Each time this button is pressed, each
ture is displayed as shown below.
Programme
PIP
PR-
SWAP
INPUT
AV4
mode for the sub
input
picture.
mode for the sub
pic-
AV2
AV1
number
PR+
picture.
(option)
AV3
Note :
a.
You can also adjust it in the Special menu.
b. In some models, when the sub picture quality get poor for sub
picture, select Auto, PAL, SECAM or NTSC in PIP System menu.
Swapping
between main and sub
Press the SWAP button to
Programme
exchange
selection for sub
pictures
the main and sub
pictures.
picture
Press the PR +/- buttons to select a programme for the sub picture.
The selected programme number is displayed just below the programme number of main picture.
Sub
picture
size
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
1/16 size of the main
POSITION
SIZE
SCAN
picture
1/9 size
picture
1/2 size
STILL
Note : If broadcasting system of the main picture for PIP is differ
from sub picture's for PIP, the sub picture not be natural. (ex: In
case that main picture/sub picture is PAL/NTSC system)
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub pictures move clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations on 12
sub pictures and see your favorite station by exchanging the main
and sub pictures.
Press the SCAN button repeatedly to select 12 sub pictures.
The selected sub pictures search all the stored stations
Press the SCAN button again to switch off sub pictures.
.
24
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
Teletext is
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
TV/AV
Switch on/off
TEXT
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button (option) or TV/AV button (option) to switch
off teletext. The previous mode reappears.
PR
OK
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
Page
1.
2.
lowing page.
colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
M
button to switch to LIST mode.
Programming
PR
1
2
3
4
5
6
7
8
9
a
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
0
M
the remote control handset.
1.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
4.
coloured button.
select this page with the same coloured button.
The three other coloured buttons are programmed in the
same
way.
25
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
PR
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
Page
1.
2.
PR
1
2
3
4
5
6
7
8
9
3.
0
26
4.
lowing page.
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
teletext
the TV
picture on
page. The display
of the
corner
screen.
the
screen
When the
while
waiting
for the
PR
new
will appear at the top left hand
is available then
updated page
will change to the page number.
Press this button to view the updated teletext page.
display
HOLD
Stops
the automatic page
change
which will
occur
if
a
telePR
text page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown
on the screen below the time. When this button is pressed
the stop symbol is displayed at the top left-hand corner of
the screen and the automatic page change is inhibited.
To continue press this button again.
1
2
3
4
5
6
7
8
9
0
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
SIZE
TIME
REVEAL
?
MIX
picture
off press this button
again.
TIME
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED / GREEN, D / E
NUMBER buttons.
change
Press this button
again
or
to exit this function.
27
Connection of external
You
can
connect additional
equipment
equipment,
such
as
VCRs, camcorders
etc. to your set.
VIDEO
PB
Y
(L)-AUDIO-(R)
PR
Here shown may be somewhat different from your set.
COMPONENT 1
(480i/480p/576i)
DVD
INPUT
COMPONENT 2
(480i/480p /576i)
Y
VIDEO
PB
PR
VIDEO
(L)-AUDIO-(R)
(L)-AUDIO-(R)
MONITOR
OUTPUT
ANT IN
Aerial socket
AV2
LL
AV1
MONO
1.
2.
VCR
3.
4.
5.
VIDEO
Y
PB
PR
(L)-AUDIO-(R)
Y
PB
PR
(L)-AUDIO-(R)
COMPONENT
1
(480i/480p/576i)
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
DVD
INPUT
COMPONENT 2
(480i/480p /576i)
VIDEO
VIDEO
(L)-AUDIO-(R)
Euro scart socket
MONITOR
OUTPUT
ANT IN
AV2
(option)
AV1
1.
MONO
2.
VCR
VIDEO
PB
Y
PR
L-AUDIO-R
PR
L -AUDIO -R
COMPONENT
Otherwise press the TV/AV button
1
(480i/480p/576i)
DVD
INPUT
to select AV 1 or AV 2. The VCR
COMPONENT 2
(480i/480p /576i)
VIDEO
Y
PB
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket, the set will switch to AV 1 or AV 2 mode automatically.
But if you want to keep on watching TV mode, press the D / E
or NUMBER buttons.
on
the remote control handset
on the
playback picture appears
screen.
ANT IN
OUT
LL
VIDEO
(L)-AUDIO-(R)
IN
AV1
You can also record programmes received
in the AV1.
AV2
AV4
Note
VCR
a.
VIDEO
Y
PB
PR
(L)-AUDIO-(R)
Y
PB
PR
(L)-AUDIO-(R)
COMPONENT
1
(480i/480p/576i)
b.
DVD
INPUT
COMPONENT 2
(480i/480p /576)
VIDEO
VIDEO
(L)-AUDIO-(R)
by the
TV
on
video tape
:
Signal type RGB, i.e. the signals red, green and blue can only
be selected for the Euro scart can be received. These signals
are transmitted, for example, by a pay TV decoder, game
machine or photo CD unit, etc.
If Euro scart 4 socket has been connected to the VCRs simultaneously, only the AV 2 can be received.
MONITOR
OUTPUT
ANT IN
AV2
Audio/Video in/out sockets
AV1
MONO
1.
VCR
2.
3.
(option)
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
Press the TV/AV button to select AV 1, AV 2 or AV 3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
AV3
S-VIDEOL/MN
AUDIO
R
VCR
28
You
also record programmes received
via
audio/video
out sockets.
tape
can
by
the TV
on
video
Note :
If you have a mono VCR, connect the audio cable from the VCR
a.
to the AUDIO L/MONO socket of the set.
b. When the set has been connected to the external equipment,
you can select AV or COMPONENT modes with the remote control handset.
Connection of external
S-Video / Audio in sockets
When
ity
1.
connecting
will be further
an
equipment
(S-AV) (option)
VCR to the S-VIDEO socket, the
picture qual-
AV3
S-VIDEO
improved.
Connect the S-video socket of the VCR to the S-VIDEO socket
L/MON
of the set.
2.
AUDIO
R
Connect the audio cable from the VCR to the AUDIO sockets of
the set.
3.
Select AV3
4.
Press the PLAY button
The VCR
Note
:
the TV/AV button
by pressing
on
repeatedly.
S-VIDEO VCR
the VCR.
playback picture appears
on
the
screen.
If both S-VIDEO and VIDEO sockets have been connected to
the VCR
simultaneously, only
Component
the S-VIDEO
can
be received.
in sockets
VIDEO
Y
PB
PR
(L)-AUDIO-(R)
COMPONENT 1
(480i/480p/576i)
DVD
INPUT
COMPONENT 2
(480i/480p /576i)
Y
PB
VIDEO
VIDEO
1.
2.
Connect the COMPONENT VIDEO output sockets
(Y Cb Cr,
YPbPr,YB-YR-YorYPBPR)oftheDVDplayertotheDVD
INPUT VIDEO sockets (Y PB PR) of the set.
Connect the audio cable from the DVD player to DVD
PR
(L)-AUDIO-(R)
(L) AUDIO-(R)
MONITOR
OUTPUT
ANT IN
AV2
AV1
MONO
DVD
Player
INPUT AUDIO sockets of the set.
3.
Press the TV/AV button to select COMPONENT1
or
COMPO-
NENT2.
4.
Press the PLAY button
The DVD
Note
:
on
the DVD
playback picture appears
DVD audio
input can
player.
on
the
screen.
be output, but DVD video
input
cannot
be output.
VIDEO
Y
PB
PR
(L)-AUDIO-(R)
Y
PB
PR
(L)-AUDIO-(R)
COMPONENT 1
(480i/480p/576i)
DVD
INPUT
COMPONENT 2
(480i/480p /576i)
VIDEO
VIDEO
Monitor out sockets
(L)-AUDIO-(R)
MONITOR
OUTPUT
ANT IN
AV2
AV1
MONO
Connect the audio/video in sockets of the other TV
MONITOR OUTPUT sockets of the set.
or
monitor to
Second TV
29
NOTE
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
31
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising