LG | RT-54NA63RB | LG RT-54NA63RB Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
cover
require
and
quote this infor-
service.
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
On screen language selection (option)
7
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine tuning / Programme edit
Favourite programme
Calling the programme table
9
Setting
Picture adjustment
PSM (Picture Status Memory)
Picture adjustment / Auto convergence
Turbo picture selection
14
Sound adjustment
SSM (Sound Status Memory) / Sound adjustment
Turbo sound selection / Sound output selection
Stereo/Dual reception / NICAM reception (option)
16
Time setting
Clock / Off time / On time
Auto sleep
19
Other functions
TV and AV modes
Auto AV switching (option) / Child lock
Picture format / Sleep timer
21
PIP operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
23
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
24
Connection of PC
PC in socket (option)
RGB-PC mode (option)
27
Connection of external equipment
Aerial socket
Audio/Video in/out sockets
Euro scart socket (option)
S-video/Audio in sockets (S-AV) (option)
DVD in sockets / DTV in sockets (option)
Monitor out sockets
29
Troubleshooting
2
check list
Back
cover
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms
ial and mains
or
powercuts, please pull
out the aer-
plugs.
Warning
To prevent fire
moisture.
or
shock hazard, do not expose the set to rain
or
Service
Never
remove
the back
high voltage
properly, unplug it
very
of the set
this
expose you to
and other hazards. If the set does not operate
cover
as
can
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is
the
Do
on
in
position to allow a free flow
ventilation openings on the back cover.
not place the set on a sloping or unstable
placed
a
the bottom of the set may
cause
it to
move
of air. Do not
area as
cover
the casters
and to be
damaged.
When displaying still pictures such as videogames, 16:9 picture format, PIP display, and station label for a long time, the image may
be persisted on the screen.
Manufactured under license from Dolby Laboratories. "Dolby"
and the double-D symbol are trademarks of Dolby Laboratories.
3
Location and function of controls
POWER
1
TV/AV
2
MULTIMEDIA
12
TURBO
SOUND
34
PICTURE
PIP
13 Remote control handset
TEXT
PR-
PR+
SWAP
MENU
INPUT
PR
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
14 Before you use the remote control
teries. See the next page.
15 1. POWER
switches the set
MUTE
16 2.
5
VOL
OK
7
8
9
PSM
0
SSM
SCAN
STILL
18
9
10
TIME
SLEEP
REVEAL
M
?
LIST
19
I/II
STOP
11
REW
Q.VIEW
P/STILL
PLAY
ARC
20
21
REC
FF
5.
6.
TELETEXT /
(With
MENU
selects
D / E
(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Up/Down)
adjusts the volume.
PIP)
adjusts
menu
7.
4
PR-
PR+
SWAP
MENU
INPUT
PR
MUTE
5
7
8
9
PSM
0
SSM
POSITION
SCAN
STILL
SLEEP
LIST
Q.VIEW
ARC
SIZE
I/II
(Without TELETEXT/With PIP)
4
settings.
accepts your selection
PICTURE
PIP
pictures.
a menu.
OK
SOUND
standby.
PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
SCAN
switches on or off the programme scan mode 12 sub
17
8
MIX
standby.
off to
4.
456
SIZE
TV/AV
selects TV or AV mode.
switches the set on from
or
TURBO SOUND BUTTON
selects Turbo sound.
123
POSITION
standby
3.
PR
7
from
on
VOL
6
handset, please install the bat-
8.
9.
or
displays
the current mode.
NUMBER BUTTONS
switches the set on from
standby or directly
PSM (Picture Status Memory)
recalls your preferred picture setting.
SLEEP
sets the
sleep
select
a
number.
timer.
10. I/II
selects the language during dual language broadcast.
selects the sound output (option).
11. VCR BUTTONS
control a LG video cassette recorder.
Location and function of controls
12. MULTIMEDIA
selects Component 1,
PC (option) modes.
Component 2
or
RGB-DTV
or
RGB-
POWER
1
TV/AV
MULTIMEDIA
2
13. TURBO PICTURE BUTTON
selects Turbo picture.
SOUND
PICTURE
3
14. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
MENU
PR
MUTE
16
5
returns to the
viewed programme.
favourite programme.
a
13
15
15. SWAP
selects
TURBO
12
previously
VOL
OK
VOL
6
16. MUTE
switches the sound
on or
off.
17. SSM (Sound Status Memory)
recalls your preferred sound setting.
18. STILL
freezes motion of the
PR
picture.
4
5
6
7
8
9
PSM
0
SSM
17
STILL
18
picture
format.
SLEEP
9
10
21. Q.VIEW
returns to the
a
3
8
the programme table.
20. ARC
select your desired
selects
2
7
19. LIST
displays
1
previously viewed programme.
favourite programme.
19
I/II
STOP
11
LIST
REW
Q.VIEW
P/STILL
PLAY
ARC
20
21
REC
FF
* : No function
COLOURED BUTTONS
TELETEXT
models)
or
These buttons
programme edit.
:
are
used for teletext
(only
Note : In teletext mode, the PR +/-, SWAP and INPUT buttons
used for teletext function.
are
(Without PIP/TELETEXT)
SOUND
Battery
PICTURE
installation
TEXT
14
The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
-
MENU
PR
MUTE
5
7
8
9
PSM
0
SSM
UPDATE
INDEX
SIZE
TIME
MIX
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
6
I/II
STOP
SLEEP
HOLD
REVEAL
M
Q.VIEW
P/STILL
?
LIST
ARC
REC
(With TELETEXT/Without PIP)
5
Location and function of controls
Front
?
panel
RT-44NZ31 series
2
TV/AV
TVAV
OK
MNU
NDEX
OL
MENU
OK
INDEX
VOL
PR
PR
1
3
5678
4
10
S-VIDEOL/MN
11
AUDIO
R
AV3
?
RT-44/49/54NA63 series
(Side panel)
2
TV/AV
TV/AVMENU
1
OK
MUTE
VOL
MAIN POWER
on or
off.
8.
3.
(Light Emitting Diode) DISPLAY
Option : Only RT-44/49/54NA63 series,
: PAL/SECAM input signal indicator
: STEREO sound indicator
: SLEEP timer indicator
: CHILD LOCK setting indicator
: RGB-DTV input signal indicator
LED
9.
PAL
(option)
: PC input signal
7.
6
PR
indicator
TV/AV
selects TV or AV mode.
switches the set on from
OK
a menu.
or
mode.
INDEX
switches LED DISPLAY
MUTE
switches the sound
displays
on or
on or
the current
off.
off.
10. F / G
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
(option)
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
mode.
dims when the set is switched on.
MENU
selects
10
accepts your selection
REMOTE CONTROL SENSOR
6.
VOL
5679
4
2.
5.
MUTE
ON/OFF
switches the set
4.
OK
PR
3
1.
MENU
11. AUDIO/VIDEO IN SOCKETS
(AV3)
Connect the audio/video out sockets of external equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-AV)
Connect the video out socket of an S-VIDEO
VCR to the S-VIDEO socket.
Connect the audio out sockets of the SVIDEO VCR to the audio sockets as in AV3.
standby
standby.
*
CASTERS (on the bottom)
turn and move the set easily.
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E, TV/AV,
MULTIMEDIA or NUMBER buttons on the remote control handset
to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You can select
buttons.
a
Volume
programme number with the D / E
or
TURBO
SOUND
MENU
adjust
VOL
Press the Q.VIEW
or
PR
MUTE
the volume.
Quick view
were
MULTIMEDIA
SWAP
Press the F / G button to
Note
TV/AV
NUMBER
adjustment
gramme you
POWER
SWAP button to view the
previous
OK
VOL
pro-
watching.
This function works only when Favourite programme is
set to Off. Otherwise each press of this button will select a stored
favorite programme.
:
Mute function
1
2
3
display
4
5
6
TURBO
7
8
9
0
SSM
Press the MUTE button. The sound is switched off and the
W appears.
You can cancel it by pressing the
SOUND or SSM button.
MUTE,
F
/
G, I/II,
PR
Auto Demonstration
To review all the menus programmed in the set, press the OK button of the front panel control for about 10 seconds. To stop auto
demonstration, press any button of the front panel control and
POWER button of the remote control.
On
screen
language
selection
The menu can be displayed
First select your language.
1.
3.
the
Q.VIEW
(option)
screen
in desired
language.
Press the MENU button and then D / E button to select the
Special
2.
on
I/II
menu.
Press the G button and then D / E button to select Language.
Press the G button and then D / E button to select your desired
language.
4.
All the on screen displays will appear in the selected language.
Press the OK or F button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
viewing.
7
On
The
screen menus
between you and your set takes place on screen with
an operator menu. The buttons required for the operating steps are
also displayed.
dialogue
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
2.
3.
Press the G button and then D / E button to select a menu
item.
Press the G button to display the sub menu or the pull-down
menu.
4.
Change
the
setting
of
an
item in the sub
or
pull-down
menu
with
F/GorD/E.
You
can move
to the
higher
level
to move to the lower level menu
MENU
VOL
Note :
In AV modes, if you adjust the Station menu, AV modes return
a.
to the TV mode.
b. In the teletext mode, menus are not displayed.
In some models, the Language will not display.
c.
PR
OK
with OK or F button and
press the G button.
menu
VOL
Station
Picture
Auto programme
Manual programme
Programme
edit
Favourite programme
G
PSM
G
G
Contrast
G
G
Brightness
G
G
Colour
G
Sharpness
G
Auto convergence
G
PR
DEOF GOOKOMENU
DEOF GOOKOMENU
Station
Picture
menu
menu
Sound
SSM
G
AVL
G
Balance
G
DEOF GOOKOMENU
Sound
Time
Special
Input
Language
G
Clock
G
G
Off time
G
Child lock
G
On time
G
Screen
G
Auto
G
DEOF GOOKOMENU
Special
8
menu
menu
sleep
DEOF GOOKOMENU
Time
menu
Setting
TV
stations
up
Station
to 100 TV stations can be stored
Up
by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
some
models up to 200 TV stations
Auto programme
can
Auto programme
Manual programme
Programme
edit
G
G
G
Favourite programme
G
be stored.
DEOF GOOKOMENU
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Auto pro-
3.
gramme.
Press the G button to
display
the Auto programme
menu.
Auto programme
System
Storage
G
from
Start
G
G
BGI
DK
MENU
M
VOL
DEOF GOOKOMENU
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
5. Press the OK or F button.
6. Press the D / E button to select Storage from.
7. Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
8. Press the OK button.
9. Press the D / E button to select Start.
10. Press the G button to begin auto programming.
PR
OK
VOL
4.
PR
1
2
3
4
5
6
7
8
9
0
Auto programme
System
Storage
Start
G
from
G
G
-----(BG)
7
45%
MENU
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
9
Setting
Station
TV
stations
up
Manual programme
Auto programme
Manual programme
Programme
edit
G
G
G
Favourite programme
G
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
DEOF GOOKOMENU
tuning
2.
3.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Manual
programme.
Press the G button to display the Manual programme menu.
Manual programme
Storage
System
G
Channel
G
Fine
G
Search
G
Name
G
Booster
G
5
G
DEOF GOOKOMENU
MENU
VOL
4.
5.
PR
OK
VOL
6.
7.
8.
PR
1
2
3
4
5
6
7
8
9
9.
10.
11.
0
12.
13.
14.
15.
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it,
i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF or
Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
Manual programme
Storage
System
G
Channel
G
Fine
G
Search
G
Name
G
Booster
G
G
GGG
Stored
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
10
Setting
TV
stations
up
Station
Assigning station name
1.
Repeat the 'Manual programme tuning' steps 1 to 3.
2.
Press the D / E button to select Name.
3. Press the G button on the Name pull-down menu.
4.
Press the D button. You can use the alphabet A to Z, the numeric
a
Auto programme
Manual programme
Programme
edit
G
G
G
Favourite programme
G
0to9anda+, -,blank.
5.
6.
7.
With the E button you can select in the opposite direction.
Select the position by pressing the F / G button and then take
your choice of the second character, and so on.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
DEOF GOOKOMENU
viewing.
Booster
In some models, Booster is an optional function.
Booster can perform this function.
Only
a
set with
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
1.
2.
3.
4.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
Press the G button.
Press the D / E button to select On or Off on the Booster
Repeat
pull-down
5.
6.
Repeatedly press
viewing.
VOL
OK
VOL
the MENU button to return to normal TV
tuning
Normally
1.
2.
3.
PR
menu.
Press the OK or F button.
Fine
MENU
fine
tuning
is
only
necessary if
reception
is poor.
PR
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Fine.
Press the G button.
Repeat
Manual programme
Storage
System
G
Channel
G
Fine
G
Search
G
Name
G
Booster
G
1
2
3
4
5
6
7
8
9
0
G
GGG
F GOOKOMENU
4.
5.
6.
Press the F / G button to fine tune for the best picture and
sound on the Fine pull-down menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will
during programme selection.
be indicated
by yellow
number
11
Setting
Station
Auto programme
Manual programme
Programme
edit
Programme
G
G
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
DEOF GOOKOMENU
edit
G
G
Favourite programme
TV
stations
up
2.
3.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E
button to select
Programme edit.
Press the G button to display the Programme edit menu.
Programme
0
1
2
3
4
edit
5C05
-----
6
-----
7
-----
8
-----
9
-----
Delete
-----
-----
-----
-----
Copy
Skip
Move
DEF GOMENU
MENU
PR
Deleting
a
Copying
a
1.
2.
VOL
VOL
1.
2.
programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
programme
Select a programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
Moving
PR
1
2
3
4
5
6
7
8
9
1.
2.
3.
or F
one
/ G button.
position.
a
programme
Select a programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
theD/EorF/Gbutton.
4.
Press the YELLOW button
Programme
0
0
1
2
3
4
again
to release this function.
edit
-----
-----
-----
-----
-----
5C05
6
7
8
9
-----
-----
-----
-----
Move Off
DEF GOMENU
Skipping
1.
2.
3.
a
programme number
programme number to be
F
G
E
Select a
with
the
D
or
/
/
skipped
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
gramme.
When a programme number is skipped it means that you will be
unable to select it using the D / E button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Repeatedly press
12
the MENU button to return to normal TV
viewing.
TV
stations
up
Setting
Station
Favourite programme
This function lets you select your favourite programmes
1.
2.
directly.
Programme
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Favourite
programme.
3.
Auto programme
Manual programme
Press the
G
button to
edit
G
G
G
Favourite programme
G
the Favourite programme
display
menu.
DEOF GOOKOMENU
Favourite programme
Auto programme
Manual programme
Programme
G
G
edit
G
Favourite programme
On
---
-----
---
-----
---
-----
---
-----
G
---
-----
---
-----
---
-----
---
-----
F G0-9ODEOOKOMENU
4.
5.
6.
7.
8.
9.
Press the F / G button to select On.
Press the D / E button to select
-----.
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
To store another programme, repeat steps 5 to 6.
You can store up to 8 programmes.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
--
viewing.
MENU
VOL
press the Q.VIEW
favourite programmes.
Repeatedly
Calling
SWAP
or
PR
OK
VOL
SWAP button to select stored
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
PR
1
2
3
4
5
6
7
8
9
Displaying
Station
0
0
1
2
3
4
-----
-----
-----
-----
-----
5C05
6
7
8
9
-----
-----
-----
-----
LIST
Q.VIEW
DEOF GOOKOMENU
Note :
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
programme in the programme table
Select a programme with the D / E or F / G button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
a
Paging through a programme table
There are 10 (or 20) programme table pages in which contain 100
(or 200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
Press the LIST button to return to normal TV
viewing.
13
Picture
Picture
PSM
PSM
G
Contrast
G
Brightness
G
Colour
G
Sharpness
G
Auto convergence
G
1.
2.
3.
adjustment
(Picture Status Memory)
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select PSM.
Press the G button and then D / E button to select a picture
setting on the PSM pull-down menu.
Picture
DEOF GOOKOMENU
PSM
G
Dynamic
Contrast
G
Standard
Brightness
G
Mild
Colour
G
Game
Sharpness
G
User
Auto convergence
G
DEOFOOKOMENU
4.
5.
Press the OK
Repeatedly
viewing.
You
MENU
VOL
can
VOL
Picture
You
1.
2.
3.
adjustment
adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC input only) to the levels you prefer.
can
ness
PR
button.
press the MENU button to return to normal TV
also recall a desired picture (Dynamic, Standard,
Mild, Game or User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for good picture reproduction at the factory and cannot be changed.
PR
OK
or F
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select the desired
picture item.
Press the G button.
Picture
PSM
Contrast
PSM
G
G
Brightness
G
Colour
G
Sharpness
G
Tint
G
Auto convergence
G
100
DEOF GOOKOMENU
4.
Press the F / G button to make appropriate adjustments on the
each sub menu.
You can also select other Picture items directly with D / E button and adjust them with F / G button.
Contrast
85
F GODEOOKOMENU
5.
6.
Press the OK button to store it for the picture.
Repeatedly press the MENU button to return to normal TV
viewing.
14
Picture
adjustment
Picture
Auto convergence
This function enables you to
adjust the colour convergence of
screen automatically during receiving the signals. When the set is
first installed or it is relocated, the picture may be unstable with
three colour ghosts (red, green, blue). This problem can be solved
by adjusting the colour convergence.
1.
2.
PSM
G
Contrast
G
Brightness
G
Colour
G
Sharpness
G
Auto convergence
G
DEOF GOOKOMENU
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Auto con-
vergence.
Auto convergence
85%
TURBO
PICTURE
3.
Press the G button to
adjust
the colour convergence
Note :
a.
The Auto convergence isn't suitable to
b.
c.
use
in
automatically.
case
of no broad-
casting signal.
MENU
The Auto convergence function will be operated about 40 seconds.
The colour of operating point will be changed in order of 'blue-
green-red'.
d.
PR
VOL
OK
VOL
Make the surrounding illumination dark when the screen is
unstable or the message "Ensure lights are dimmed sufficiently" is displayed on screen after operating Auto convergence. The Auto convergence will then have to be operated
again.
e.
f.
This function will be operated after about 20 minutes from
switching the set on.
Adjust the Auto convergence according to a broadcasting system (50Hz or 60Hz) each.
Turbo
picture
PR
selection
When this function is on, picture will be more brilliant and distinct
picture than normal picture. You can enjoy the Turbo picture so
much better than normal picture.
Repeatedly press the TURBO PICTURE button to switch on or off.
(Turbo Picture off)
(Turbo Picture on)
15
Sound
Sound
SSM
SSM
G
AVL
G
Balance
G
You
adjustment
(Sound Status Memory)
select your preferred sound setting; Dolby Virtual, Flat,
Music, Movie or Speech and you can also adjust the sound frequency of equalizer.
1.
DEOF GOOKOMENU
2.
3.
can
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select SSM.
Press the G button and then D / E button to select a sound setting on the SSM pull-down menu.
Sound
TV/AV
SSM
G
Dolby
AVL
G
Flat
Balance
G
Music
Virtual
Movie
Speech
User
G
DEOFOOKOMENU
MENU
PR
Dolby Virtual
Dolby Virtual lets you experience panoramic
VOL
OK
Sound Frequency Adjustment
a. Press the G button in User to
VOL
display
effects of sound.
the User sub
menu.
PR
0.1
0.5
1.5
5.0
10KHz
DEOF GOOKOMENU
SSM
b. Select a sound band by pressing the F / G button.
c. Make appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
Repeatedly press the MENU button to return to normal TV viewing.
You
desired sound (Dolby Virtual, Flat, Music,
Movie, Speech or User) with SSM button on the remote control.
The sound Dolby Virtual, Flat, Music, Movie and Speech are
programmed for optimum sound reproduction at the factory and
cannot be changed.
can
also recall
a
If you press the SSM button after making appropriate adjustment on the User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Dolby Virtual, Flat, Music, Movie or Speech.
Note
16
:
Sound
Sound
You
adjustment
Sound
adjustment
adjust
matically keeps
can
balance
on an
or
AVL
equal
Volume Leveler). AVL autovolume level even if you change pro-
(Auto
SSM
G
AVL
G
Balance
G
grammes.
1.
2.
3.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; Balance or AVL.
Make desired adjustment with the F / G, D / E or OK button
on each pull-down menu.
DEOF GOOKOMENU
Sound
TURBO
SSM
G
AVL
G
SOUND
GOn
Balance
Off
DEOFOOKOMENU
4.
Repeatedly press
viewing.
Note
:
PICTURE
MENU
the MENU button to return to normal TV
The AVL isn't suitable to
use
Dolby
Virtual.
Turbo sound selection
When this function is on, sound will be more emphasized and
amplified sound than normal sound. You can enjoy the Turbo
Sound so much better than normal Sound.
Repeatedly press the TURBO SOUND button to switch on or off.
MEGA TURBO
(Turbo Sound off)
Note
:
The Turbo Sound isn't suitable to
(Turbo Sound on)
use
Dolby
Virtual.
17
Sound
adjustment
Sound output selection
In AV
mode, you
can
select output sound for the left and
right
loud-
speakers.
Repeatedly press the I/II button to select the sound output.
L+R :
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L : Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
Stereo/Dual
MENU
VOL
When
programme is selected, the sound information for the station
appears after the programme number and station name disappear.
PR
OK
PR
reception
a
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
VOL
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
selection for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II but-
Language
ton
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
a
separate language
to each
loudspeaker.
I/II
NICAM
reception (option)
with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
If your set is
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
18
equipped
Time
setting
Time
Clock
1.
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Clock.
Press the G button and then D / E button to adjust hour.
Clock
G
Off time
G
On time
G
Auto
G
sleep
Time
DEOF GOOKOMENU
Clock
G
Off time
G
On time
G
Auto
G
sleep
01 :06
DEOF GOOKOMENU
4.
5.
6.
Press the G button and then D / E button to adjust minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
MENU
PR
Off time
By using this function in On mode, the set automatically switches
off at a preset time. You must set the time correctly before using off
time function.
1.
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Off time.
Press the G button and then D / E button to adjust hour.
VOL
OK
VOL
PR
Time
Clock
G
Off time
G
07 :00
On time
G
Off
Auto
G
sleep
DEOF GOOKOMENU
4.
5.
6.
Press the G button and then D / E button to adjust minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
19
Time
Time
setting
On time
Clock
G
Off time
G
On time
G
Auto
G
sleep
this function in On mode, the set automatically switches
on at a preset time with desired program number and volume. You
must set the time correctly before using on time function.
By using
1.
2.
DEOF GOOKOMENU
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select On time.
Press the G button and then D / E button to adjust hour.
Time
Clock
G
Off time
G
On time
G
01 :00
Auto
G
Pr.
sleep
Vol.
3
30
On
DEOF GOOKOMENU
4.
5.
6.
MENU
PR
7.
8.
Press
Press
Press
Press
the
the
the
the
G button and then D / E button to
G button and then D / E button to
G button and then D / E button to
adjust
adjust
adjust
minute.
Pr..
Vol..
OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
VOL
VOL
Auto
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
PR
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto sleep.
Press the G button and then D / E button to select On or Off on
the Auto sleep pull-down menu.
Time
Clock
G
Off time
G
On time
G
Auto
GOn
sleep
Off
DEOFOOKOMENU
4.
Repeatedly
viewing.
press the MENU button to return to normal TV
Note :
a.
This functions work only in standby mode.
b. If you adjust hour or minute on the on/off time menu, automatically on/off time is changed to On.
c.
To cancel the set's on/off time, set the on/off time to Off.
d.
To view the remaining on/off time, select the Time menu.
e.
Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
20
Other functions
Special
TV and AV modes
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Input
Language
G
Child lock
G
Screen
G
G
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
DEOF GOOKOMENU
1.
Press the MENU button and then D / E button to select the
Special
2.
3.
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1,
AV2, AV3, AV4 (option), COMPONENT1, COMPONENT2 or
RGB-DTV
or
RGB-PC
(option)
on
the
Input pull-down
TV/AV
menu.
Special
Input
Language
G
TV
G
Child lock
G
Screen
G
AV1
AV2
AV3
AV4
COMPONENT1
COMPONENT2
RGB-DTV
MENU
PR
RGB-PC
DEOFOOKOMENU
VCR connected to the AV1 sockets on the set
AV 2 : VCR connected to the AV2 sockets on the set
AV 3 : VCR connected to the AV3 sockets on the set
AV 4 : VCR connected to the Euro scart socket on the set
AV 1
:
VOL
VOL
(option)
COMPONENT 1 : DVD Player connected to the COMPONENT 1
sockets on the back
COMPONENT 2 : DVD Player or SET TOP connected to the
COMPONENT 2 sockets on the back
RGB-DTV : SET TOP connected to the RGB-DTV INPUT sockets on the back
RGB-PC : PC connected to the PC INPUT sockets on the back
PR
(option)
4.
Repeatedly press
viewing.
Alternatively you
can
the MENU button to return to normal TV
select the TV
or
AV mode
by pressing
the
TV/AV button.
In AV
modes, to return to TV mode, press the
Auto AV
D / E or NUMBER buttons.
switching (option)
If your VCR outputs switching voltage when switched to playback
with the VCR connected to the Euro scart socket, the set will auto-
matically
switch to AV4 mode when
an
AV
signal
is
input.
Press the
TV/AV button to return to AV modes.
21
Other functions
Special
Child lock
Input
Language
G
Child lock
G
Screen
G
G
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
DEOF GOOKOMENU
4.
Press the MENU button and then D / E button to select the
Special
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off
on the Child lock pull-down menu.
Repeatedly press the MENU button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The
any button
Child lock on will not appear on the screen if
the front panel is pressed while displaying the
display
on
menus.
Picture format
MENU
You can watch TV in various picture formats; 16:9, 14:9 (option),
Zoom (option), Auto (option) and 4:3.
In some models, You can watch TV in various picture formats; 4:3
or 16:9 (Wide). (only COMPONENT2 or RGB-DTV modes)
Repeatedly press the ARC button to select your desired picture format.
PR
16:9
You can
VOL
OK
VOL
enjoy the cinema (the picture
programme through the 16:9 mode.
format of
16:9)
or
general
TV
14:9 (option)
The screen 14:9 is viewed just like that but the screen 4:3 is magnified to the upper / lower so that the screen 14:9 is full.
You can move the screen up or down with D / E button.
Zoom (option)
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower sides so that the
screen 16:9 is full. The bottom and top of the picture may be lost.
You can move the screen up or down with D / E button.
PR
Auto (option)
When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent.
4:3
This
SLEEP
ARC
picture
format is 4 to 3 of
general
TV.
Note :
In the double window and scan mode, ARC function isn't availa.
able.
b.
When you watch the TV on 4:3 or 16:9 mode, the screen will
move every 2 hours to avoid a permanent image on the screen.
Sleep
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
---
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
c.
When you switch the set off, the set releases the preset sleep
time.
---
22
PIP
Option
PIP is
operation (option)
:
an
optional function,
so
that
only the
set with PIP function can
operate.
PIP
(Picture
in
Picture) displays
a
within
picture
a
picture.
On and off
Press the PIP button to switch on the sub
press this button again to switch it off.
Input
mode selection for sub
picture.
picture
Press the INPUT button to select the
input mode for
pressed, each input mode
the sub
Each time this button is
ture is displayed as shown below.
for the
Programme
AV4
Swapping
number
between main and sub
Note : When the main
available.
Programme
picture
is TV
selection for sub
Press the PR +/- buttons to select
picture
or
a
AV
Note :
a.
When the sub
modes, the swapping is
picture
the desired sub
1/2 size
picture.
size is 1/2 of the main
picture
(option)
picture,
is able to work in TV
or
the
picture
AV modes
POSITION
SCAN
STILL
SIZE
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
pictures.
programme for the sub
picture
quality might get poor.
1/2 size of the main picture
for main picture.
picture
pictures
size
1/9 size of the main
Sub
INPUT
picture
Repeatedly press the SIZE button to select
size. The sub picture appears as below.
b.
PR+
SWAP
the main and sub
exchange
PIP
PR-
AV3
Press the SWAP button to
Sub
AV2
AV1
(option)
picture.
sub pic-
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub pictures move clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations on 12
sub pictures and see your favourite station by exchanging the main
and sub pictures.
Press the SCAN button to select 12 sub pictures.
The selected sub pictures search all the stored stations.
Press the SCAN button again to switch off sub pictures.
Note : When the main
available.
picture
is TV
or
AV
modes, the scanning is
23
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
Teletext is
a
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
TEXT
Switch on/off
Press the TEXT button to switch to teletext.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
PR
OK
reappears.
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or following page.
Page
PR
1.
1
2
3
4
5
6
7
8
9
2.
0
colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
M
button to switch to LIST mode.
Programming
M
a
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
can
4.
24
coloured button.
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
PR
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
Page
1.
2.
3.
4.
PR
1
2
3
4
5
6
7
8
9
0
lowing page.
25
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
solutions of riddles or puzzles.
Press this button again to remove the information from the
display.
SIZE
Selects double
Press
Press
height text.
this button to enlarge the top
this button again to enlarge
page.
Press this button
PR
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
teletext
the TV
picture on
page. The display
of the
corner
screen.
will
display
the
while
waiting
for the
new
will appear at the top left hand
When the updated page is available then
change
to the page number.
Press this button to view the
PR
screen
updated
teletext page.
HOLD
1
2
3
4
5
6
7
8
9
the automatic page
text page consists of 2 or
Stops
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
stop symbol is displayed
0
more
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
SIZE
MIX
TIME
REVEAL
?
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
picture
off press this button
again.
TIME
TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
When
viewing
button
again
a
to remove the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED / GREEN, D / E
NUMBER buttons.
change
Press
26
again
to exit this function.
or
Connection of PC
PC in socket
1.
2.
3.
4.
(option)
Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the PC input socket of the set.
Connect the audio cable from the PC to the AV2 (PC SOUND)
sockets of the set.
Press the TV/AV or MULTIMEDIA button to select RGB-PC.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
Note :
a.
Connect PC to the PC input sockets of the set after changing
the resolution of PC.
b. If you want to watch the PC monitor only, switch off the set with
the POWER button on the remote control handset. (If you
switch off the set with the ON/OFF button on the set, the screen
of the PC isn't displayed.)
Displayable
MODE
Monitor
(R)-AUDIO-(L)
VIDEO
OUT
S-VIDEO
AV2
RGB-DTV
()
(L)
(L)
AUDIO (R)
(R)
AUDIO
SOUND
RGB DTV/PC
-
AV1
Y
Y
PB
PB
PR
PR
MONO
VIDEO
ANT IN
LL
AV4
COMPONENT1
(480/576i)
VIDEO
COMPONENT2
(480p/576p/
720p/1080)
DVD/DTV INPUT
RGB-DTV INPUT(480p/576p/720p/1080i)
RGB-PC INPUT(VGA/SVGA/XGA/SXGA)
PERSONAL COMPUTER
Specification
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
720x400
31.5
70
640x480
31.5
60
640x480
37.5
75
640x480
43.3
85
800x600
37.9
60
800x600
46.9
75
800x600
53.7
85
832x624
49.4
1024x768
48.4
60
1024x768
60.023
75
1024x768
68.677
85
1152x864
67.5
75
1280x1024
64.0
60
VGA
SVGA
XGA
SXGA
(Synchronization input
form
:
74.55
(Mac)
separate)
27
Connection of PC
Special
RGB-PC Mode
Input
Language
G
Child lock
G
Screen
G
G
1.
2.
3.
(option)
Press the MENU button and then D / E button to select the
Special
menu.
Press the G button and then D / E button to select Screen.
Press the G button and then D / E button to select the desired
picture item.
Screen
DEOF GOOKOMENU
H-Position
G
V-Position
G
Clock
G
Clock
phase
Auto-configure
G
Reset
G
0
G
DEOF GOOKOMENU
4.
Press the F / G button to make
appropriate adjustments.
Horizontal Position / Vertical Position
This function is to adjust picture to left/right and
up/down
as
you
prefer.
MENU
VOL
Clock
This function is to minimize any vertical bars or stripes visible on
the screen background. And the horizontal screen size will also
PR
OK
change.
VOL
Clock phase
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
Auto-configure
PR
This function is for the automatic adjustment of the screen position, clock and clock phase. The displayed image will disappear
for a few seconds while the Auto-configuration is in process.
Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and clock phase manually.
Reset
This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed.
5.
6.
Press the OK button to store it for the PC monitor picture.
Repeatedly press the MENU button to return to normal TV
viewing.
28
Connection of external
You
can
connect additional
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
VIDEO
(R)-AUDIO-(L)
OUT
S-VIDEO
AV2
RGB-DTV
()
(L)
(L)
AUDO (R)
(R)
Y
Y
PB
PB
PR
PR
AUDIO
SOUND
RGB DTV
-
AV1
MONO
VIDEO
Aerial socket
1.
2.
3.
4.
5.
AV4
ANT IN
VIDEO
COMPONENT1
LL
(480i/576i)
COMPONENT2
(480p/576p
720p/1080i)
RGB-DTV
DVD/DTV INPUT
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
INPUT(480p/576p/720p/1080i)
VCR
VIDEO
(R)-AUDIO-(L)
OUT
S-VIDEO
AV2
RGB-DTV
SOUND
()
(L)
(L)
AUDIO (R)
(R)
AUDIO
RGB
AV1
Y
Y
PB
PB
PR
PR
DTV
-
MONO
VIDEO
ANTIN
AV4
VIDEO
COMPONENT1
COMPONENT2
(480/576i)
(480p/576p
720p/1080)
LL
RGB-DTV INPUT(480p/576p/720p/1080i)
DVD/DTV INPUT
Audio/Video in/out sockets
1.
2.
3.
VCR
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
Press the TV/AV button to select AV 1, AV 2 or AV 3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
also record programmes received
tape via audio/video out sockets.
can
by
the TV
on
S-VIDEOL/MN
video
AUDIO
R
AV3
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Euro scart socket
1.
2.
VCR
(option)
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket, the set will switch to AV4 mode automatically. But if you
want to keep on watching TV mode, press the D / E or NUMBER buttons.
(R)-AUDIO-(L)
VIDEO
OUT
S-VIDEO
AV2
RGB-DTV
()
(L)
(L)
AUDO (R)
(R)
AUDIO
SOUND
RGB
AV1
Y
Y
PB
PB
PR
PR
-
DTV
MONO
VIDEO
ANT IN
AV4
COMPONENT1
LL
(480i/576i)
VIDEO
COMPONENT2
(480p/576p
720p/1080i)
DVD/DTV INPUT
RGB-DTV INPUT(480p/576p/720p/1080i)
VCR
Otherwise press the TV/AV button on the remote control handset to select AV4. The VCR playback picture appears on the
screen.
You
can
also record programmes received
by the TV on
video tape.
29
Connection of external
equipment
S-Video / Audio in sockets
When
(R)-AUDIO-(L)
connecting
picture quality will
VIDEO
OUT
S-VIDEO
AV2
RGB-DTV
SOUND
()
(L)
(L)
AUDIO (R)
(R)
Y
Y
PB
PB
PR
PR
AUDO
(S-AV) (option)
S-VIDEO VCR to the S-VIDEO socket, the
be further improved.
an
RGB DTV
-
AV1
MONO
VIDEO
AV4
ANT IN
VIDEO
COMPONENT1
COMPONENT2
(480i/576i)
(480p/576p
720p/1080i)
LL
DVD/DTV INPUT
1.
RGB-DTV
INPUT(480p/576p/720p/1080i)
2.
S-VIDEO VCR
3.
4.
Note: If both S-VIDEO and VIDEO sockets have been connected
to the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
S-VIDEOL/MN
AUDIO
DVD in sockets
R
AV3
1.
S-VIDEO VCR
2.
3.
4.
(R)-AUDIO-(L)
VIDEO
OUT
S-VIDEO
AV2
RGB-DTV
SOUND
()
(L)
(L)
AUDIO (R)
(R)
AUDO
RGB DTV
-
Y
AV1
Y
MONO
VIDEO
ANT IN
AV4
VIDEO
PB
PB
PR
PR
COMPONENT1
480i/576
LL
COMPONENT2
(480p/576p
720p/1080i)
DVD DTV INPUT
DVD
30
Connect the S-video socket of the VCR to the S-VIDEO socket
of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
Select AV1 or AV3 by pressing the TV/AV button repeatedly.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
RGB-DTV
INPUT(480p/576p/720p/1080i)
Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y
or Y PB PR) of the DVD to the DVD/DTV INPUT sockets (Y PB
PR) of the set.
Connect the audio cable from the DVD to DVD/DTV INPUT
AUDIO sockets of the set.
Press the TV/AV button to select COMPONENT1 (480i/576i) or
COMPONENT2 (480p/576p/720p/1080i).
Press the PLAY button on the DVD.
The DVD playback picture appears on the screen.
Connection of external
DTV in sockets
1.
2.
3.
equipment
(option)
Connect the SET TOP outputs to the DVD/DTV INPUT sockets
(Y PB PR) on the set. (or, connect the SET TOP with the D-Sub
output socket to RGB-DTV/PC INPUT socket on the set and
audio cable of the SET TOP to the AUDIO sockets of AV2.)
Connect the audio cable from the SET TOP to DVD/DTV INPUT
AUDIO sockets of the set.
Press the TV/AV button to select COMPONENT2 or RGB-
(R)-AUDIO-(L)
S-VIDEO
AV2
RGB-DTV
()
(R)
AUDIO
RGB
Y
Y
PB
PB
PR
PR
AV1
-
DTV
MONO
VIDEO
AV4
ANTIN
LL
VIDEO
COMPONENT1
COMPONENT2
(480/576i)
(480p/576p
720p/1080
DVD/DTV INPUT
RGB-DTV INPUT(480p/576p/720p/1080i)
position
as
you
prefer
in RGB-
Press the MENU button and then D / E button to select the
Special
3.
(L)
HD-SET TOP
H/V Position adjustment
You can adjust horizontal/vertical
DTV mode.
2.
(L)
AUDIO (R)
SOUND
DTV.
1.
VIDEO
OUT
menu.
Press the G button and then D / E button to select Screen.
Press the G button to display the Screen menu.
Screen
H-Position
G0
V-Position
G
D EOF G OKOMENU
4.
5.
6.
Press the D / E button to select the desired picture item.
Press the F / G button to make appropriate adjustments.
Repeatedly press the MENU button to return to normal TV
viewing.
Monitor out sockets
Connect the audio/video in sockets of the other TV
OUT sockets of the set.
or
monitor to
(R)-AUDIO-(L)
VIDEO
OUT
S-VIDEO
AV2
RGB-DTV
SOUND
()
(L)
(L)
AUDIO (R)
(R)
AUDIO
RGB DTV
-
AV1
Y
Y
PB
PB
PR
PR
MONO
VIDEO
ANT IN
LL
AV4
COMPONENT1
COMPONENT2
(480i/576i)
(480p/576p
720p/1080i)
DVD/DTV INPUT
VIDEO
RGB-DTV
INPUT(480p/576p/720p/1080i)
Second TV
31
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
Download PDF