LG | LM-D7550A | LG LM-D7550A Owner’s Manual

LM-D6540
FOUANI_LM-D7550_ENG_119Q
modify
DVD MINI HI-FI SYSTEM
OWNER'S MANUAL
MODEL
:
LM-D7550
LM-D7550A/D/X, LMS-D7550V,
LMS-D7550S, LMS-D7550W
CD-R/R
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Designs
and
notice for
specifications
improvement.
are
subject
to
change
without
Safety
Precautions
CAUTION
CAUTION
Power Cord
Most
appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance
RISK OF ELECTRIC SHOCK
DO NOT OPEN
and has
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
concerning the
additional outlets
no
specification
(OR BACK)
or
branch circuits. Check the
page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall
outlets, loose
damaged wall outlets, extension cords, frayed power cords,
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
damaged
PERSONNEL.
or
cracked wire insulation
these conditions could result in electric shock
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
a
risk of electric
shock to persons.
The exclamation
or
of
dangerous. Any
are
or
fire.
or
Periodically examine the cord of your
appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the
cord replaced with an exact replacement part by an authorized
servicer.
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
point
within
is intended to alert the
important operating
user
an
equilateral triangle
to the presence of
walked upon. Pay particular attention to plugs, wall
the point where the cord exits the appliance.
outlets, and
and maintenance
instructions in the literature
(servicing)
accompanying the
appliance.
POWER: This unit operates
on
mains
a
of
supply
220-240V,
50/60Hz.
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
WIRING: This unit is
TRIC
mains
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
plug,
fused at 3 amp. When
amp BS 1362, BSI
the fuse
with
supplied
cover
or
ASTA
replacing
approved type.
omitted. To obtain
your dealer. If the
sockets in your
a
This unit
To
employs
ensure
manual
proper
carefully
a
Laser
use
System.
of this
and retain for future
require maintenance,
see service procedure.
Use of
read this owner's
specified
or
the
performance
of
procedures
or
prevent direct exposure
to laser
beam, do
not
try
to open
CAUTION: The apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
vases, shall be
plug with
cover
contact
suitable for the mains
plug removed from the mains
A mains
plug
a
suit-
lead of this unit
with bared wires is hazardous if
mains socket.
with the earth
plug
symbol
is
fitted,
or
use a
pin,
marked with the letter E
coloured green
3 amp
green and
or
yellow.
fuse, either in the plug,
or
at
the distribution board.
dance with the
-
BLUE:
following
are
placed
on
the
apparatus.
coloured
coloured in
accor-
codes:
NEUTRAL, BROWN: LIVE
-
As the colours of the
wires in the mains lead of this unit may not
as
fuse
this
3
instructions below:
IMPORTANT: The wires in this mains lead
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
such
use
use a
herein may result in hazardous
radiation exposure.
To
wiring
Do not connect either wire to the earth
reference, should the unit
authorized service location-
a
If any other
controls, adjustments
other than those
an
destroyed.
inserted in
product, please
contact
be
always
home, then the plug should be removed and
WARNING: A mains
must
Never
not
13 amp
approved
the fuse
replacement
type of plug supplied is
able type fitted. Please refer to the
CAUTION:
BSI 1363
a
marking identifying
correspond
the terminals in your
with the
plug, proceed
as
follows: The wire which is coloured blue must be connected to the
terminal which is marked with the letter N
or
coloured black. The
wire which is coloured brown must be connected to the terminal
which is marked with the letter L
2
or
coloured red.
Table of Contents
SpecialDVDFeatures.........................22
Introduction
SafetyPrecautions...............................2
TitleMenu...............................22
TableofContents................................3
DiscMenu...............................22
BeforeUse...................................4-5
Precautions..................................5
CameraAngle............................22
ChangingtheAudioLanguage................22
ChangingtheAudioChannel.................22
NotesonDiscs...............................5
Subtitle.................................22
AboutSymbols...............................5
AdditionalInformation.........................23
FrontPanel/RearPanel...........................6
LastSceneMemory.......................23
RemoteControl.................................7
ScreenSaver............................23
PlayableDiscs................................4
Preparation
.
Connections.................................8-11
ConnectingtoaTV............................8
ConnectingtoAntenna.........................9
.9
ConnectingtoAuxiliaryEquipment.
.10
ConnectingtoOptionalEquipment
ConnectingtoUSB...........................10
SpeakerSystemConnection....................11
BeforeOperation.............................12-19
VolumeAdjustment...........................12
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MUTE.....................................12
HeadphoneJack.............................12
EQUALIZEREffect...........................12
.12
XDSS(ExtremeDynamicSoundSystem).
OAO (Orientation Acoustic Optimizer) ON/OFF
12
MP3Optimizer...............................12
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SURROUNDEffect...........................12
DIMMER...................................12
DEMO.....................................12
Selectingthesoundsystem.....................12
Usingthesubwoofer..........................12
SettingtheClock.............................13
SleepTimerFunction..........................13
UsingMicrophone-OPTIONAL..................13
TimerFunction...............................14
GeneralExplanation..........................15
On-ScreenDisplay............................15
InitialSettings.............................16-19
GeneralOperation.........................16
LANGUAGE.............................16
DISPLAY................................17
AUDIO.................................18
OTHERS................................18
LOCK(ParentalControl)....................19
Operation
.
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTITLE....................20
.20
MovingtoanotherCHAPTER/TRACK.
.
.
.
.
.
.
.
Search.................................20
Frame-by-Frame Playback
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTrack....................24
RepeatTrack/All/Off......................24
Search.................................24
OperationwithJPEGDisc.......................25
ViewingaJPEGdisc..........................25
SlideShow..............................25
MovingtoanotherFile......................25
StillPicture..............................25
Torotatepicture..........................25
ProgrammedPlayback..........................26
RepeatProgrammedTracks.................26
.26
ErasingaTrackfromProgramList.
.26
ErasingtheCompleteProgramList.
OperationwithDivXDisc........................27
OperationwithRADIO........................28-29
Presettingtheradiostations.....................28
Listeningtotheradio..........................28
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
RDSFunction-OPTIONAL.....................29
AboutRDS-OPTIONAL....................29
RDSTuning-OPTIONAL...................29
.29
RDSDisplayOptions-OPTIONAL.
.29
ProgrammeSearch(PTY)-OPTIONAL.
OperationwithTAPE............................30
BasicPlayback..............................30
ToStopPlay................................30
ToPlayRewindorFastForward.................30
Dubbing....................................30
Recording....................................30
BasicSetting................................30
30
Recording from Radio, CD or Auxiliary source
.30
CDtoTapeSynchronizedRecording.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
GeneralFeatures..........................20-22
.
.
.
Pause..................................24
.
.20-23
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD....................20
Still Picture and
SystemSelect............................23
Mini Glossary for Audio Stream & Surround Mode 23
.24
OperationwithAudioCDandMP3/WMADisc
.24
PlayinganAudioCDandMP3/WMADisc
.
.
.
.
.
Reference
Troubleshooting................................31
LanguageCodeList.............................32
CountryCodeList..............................33
Specifications.................................34
21
SlowMotion.............................21
Repeat.................................21
RepeatA-B..............................21
About the
symbols
Indicates hazards
other material
TimeSearch.............................21
Zoom..................................21
for instructions
likely
damage.
to
Indicates
special operating
Indicates
tips
cause
harm to the unit itself
features of this unit.
MarkerSearch...........................22
and hints for
making
the task easier.
3
or
INTRODUC
Before Use
Disc-related terms
Discs
Playable
Title
(DVD only)
DVD
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
you to locate it
Audio CD
(8cm/12cmdisc)
In
addition, this unit can play a DVD±R, DVD±RW,
SVCD, and CD-R or CD-RW that contains audio titles,
MP3, WMA, JPEG or DivX files.
--
--
(Video
Sections of
Notes
Depending
the conditions of the
recording equipment or the CD-R/RW (or DVD±R/RW) disc itself,
some CD-R/RW (or DVD±R/RW) discs cannot be
played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Notes
on
audio
or an
enabling
On
of
code of the DVD
player
and DVDs
player is designed and manufactured for playregion "5" encoded DVD software. The region
the labels of
type of player
play only
some
can
DVD discs indicates
play
those discs. This
DVD discs labeled "5"
5
or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVD discs may not have a region code label even
though
4
their
track
number,
you to locate the track you want.
playback
is
prohibited by
area
limits.
There
are
two
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
functions, or other
typical computer-like operations. Moreover, still pictures
high
system via
resolution
menus, search
can
be
played
if
they
are
included in
the disc.
Video CDs not
This DVD
can
a
video CD
of video CDs
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
unit
on a
you to locate the scene you want.
A scene is composed of one or several tracks.
with the
which
only)
a picture or a musical piece
CD. Each track is assigned
video CD with PBC
other functions may be added.
Refer also to the instructions supplied with the DVDs
or
on
CD and audio CD
(Playback control) functions,
moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
Types
code
easily.
Scene
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
back of
enabling
DVDs and Video CDs
Some
Regional
feature content
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Track
on
accompanying
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
--
or
equipped
with PBC
(Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Cont'd)
After
the unit
Handling
When
shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
radio,
or
turn off the
or
use
volatile
such
liquids,
leave marks
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunthere may be a considerable
increase inside the car.
light,
as
Cleaning
temperature
discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the center out.
on
a
plastic products in
long period of time. They will
or
the surface.
Do not
To clean the cabinet
soft, dry cloth. If the surfaces
soft cloth
use
thinner,
or
are
moistened with
lightly
solution. Do not
benzine,
case.
the unit
Cleaning
use a
store the disc in its
insecticide spray,
as
the unit. Do not leave rubber
a
playing,
the exterior surfaces clean
contact with the unit for
Use
discs
Storing
Precautions
a
extremely dirty,
mild detergent
strong solvents such
as
these
as
might damage
alcohol,
the surface
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
About
records.
vinyl
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Handling
Discs
discs
Do not touch the
Hold the disc
get
on
playback
by the edges
side of the disc.
so
that
fingerprints
the surface.
Do not stick paper
or
tape
on
the disc.
will not
on
DVD
VCD
Video CDs
CD
Audio CDs
MP3
MP3 disc
WMA
WMA disc
JPEG
JPEG disc
screen
for instructions
following symbol is
represented by the symbol.
one
to the disc
DVD
DivX
during operation.
explained in this owner's
that specific DVD video disc.
symbols
A section whose title has
applicable only
Notes
symbol display
of the
DivX disc
5
INTRODUC
Front Panel/ Rear Panel
1
14
13
2
12
3
11
45
COMPONENT
VIDEO OUT
(PROGRESSIVE SCAN)
Pr
Pb
15
21
Y
MONITOR
S-VIDEO
OUT
OUT
6
10
7
9
OPTICAL
OUT
RL
20
AUX IN
WOOFER SYSTEM
19
16
SUB WOOFER
SPEAKER
18
17
8
1.
?
DISC SKIP button
6.
HEADPHONE SOCKET
?
Z OPEN/CLOSE button
7.
Z PUSH EJECT
?
DISC DIRECT PLAY buttons
8.
USB connector
9.
Z PUSH EJECT
10.
?
MIC JACKS
?
MIC VOLUME KNOB
(DISC1, DISC2, DISC3)
DISPLAY WINDOW
2.
POWER
3.
(
STANDBY/ON)
button
FUNCTION SELECT buttons
4.
11.
(TUNER, TAPE, DVD/CD, AUX)
5.
?
?
6
position (TAPE 2)
6.3
(MIC):
MANUAL TUNING
?
CD SKIP
?
CLOCK ADJUST
?
CD SYNC./ HI-DUBB. button
12. USB button
?
PROGRAM/MEMORY button
13.
?
OAO button
14. DISC TRAY
?
CLOCK button
15.
?
Jack
(Y
Pb
MONITOR OUT Jack
button
?
S-VIDEO OUT Jack
?
AUTO TUNING DOWN/UP buttons
?
OPTICAL OUT Jack
?
CD SEARCH
?
PRESET DOWN/UP buttons
?
REVERSE PLAY
?
STOP
?
SET/ CD[]/AM-NOISE/RDS
?
VOLUME knob
?
MP3 OPTIMIZER button
?
EQ/ USER EQ/ SURROUND button
(b)/
(x)/CLEAR
17.
(B)
POWER CORD
18. SUBWOOFER Connector
buttons
19. WOOFER SYSTEM connector
button
(OPTIONAL)
button
OPTIONAL
(PROGRESSIVE
16. SPEAKER Connector
buttons
PLAY
:
Pr)
?
(bb/BB)
(MIC VOL.)
COMPONENT VIDEO OUT
SCAN)
(zREC/PAUSE)
OPTIONAL
REMOTE SENSOR
TIMER button
RECORD/ RECORD PAUSE
mm :
(./>)
MODE/ RIF/ NOR-DUBB. button
?
6.3mm
position (TAPE 1)
(
)
?
?
?
PHONES):
MULTI JOG DIAL
XDSS button
PLAY MODE/ DEMO button
(
20. AUXILIARY INPUT Sockets
21. ANTENNA Connector
(AUX IN)
Remote Control
POWER
MUTE
19
1
TUNER/BAND
DVD/CD
AUX
USB
2
1.
POWER button
2.
FUNCTION SELECT buttons
3.
(TUNER/BAND, DVD/CD, AUX,USB)
NUMERIC buttons (0-9)
4.
TAPE FUNCTION buttons
-
-
3
-
-
-
-
4
1-TAPE-2
SET UP
PRESET
+
TUN.
/ENTER
7
MENU
89
RECORD/ RECORD PAUSE
TAPE STOP
?
ARROW buttons
menu
PROG./MEMO.
/
(
highlighting
in
PRESET
(
?
TUNING
(-/+) [TUN. (
/
selection
a
/
SELECT/ENTER button
8.
MENU button
)]
on
GUI
screen.)
buttons
the MENU button to
included
on a
buttons
)
7.
(Use
//)
screen, TITLE and MENU
?
TITLE
PRESET
SCAN
use
(z/[])
(x)
6.
17
(FF/GG)
TAPE 1/2 SELECT buttons
+
SELECT
6
(G)
SET UP button
DISPLAY
INTRODUC
(F: optional)
REWIND/ FAST FORWARD PLAY
(For
5
-
PLAY
5.
18
TUN.
REVERSE PLAY
DVD video
the
display
discs.)
menu screen
-
SCAN
9.
(FF/GG)/
SLOW
(t/T)/SKIP (./>)
buttons
SLOW
REPEAT
16
10
REPEAT A-B
SKIP
10.
PROG./MEMO./ REPEAT/ REPEAT A-B buttons
11
S TO P
.
12.
STOP
PAUSE/STEP
PLAY
buttons
D.SKIP
11
15
EQ
OAO
SURR.
(x)/ PAUSE([])/ STEP/ PLAY (G) buttons
EQUALIZER (EQ)/ OAO/ AUDIO/CLEAR/ ZOOM
XDSS
13.
DIMMER/ SLEEP/ ECHO buttons
14. SURROUND
XDSS/ SUBTITLE
(SURR.)/
(S-TITLE)
RETURN / MARKER/ SEARCH buttons
AUDIO
S-TITLE
14
RETURN
12
CLEAR
ZOOM
MARKER
15.
DISC SKIP
(D.SKIP)
buttons
16. VOLUME -/+ buttons
SEARCH
17. TITLE button
DIMMER
SLEEP
(Use
ECHO
included
13
Remote Control
sensor
on
DVD video
18.
DISPLAY button
19.
MUTE button
Remote control
Operation Range
Point the remote control at the remote
the TITLE button to
battery
and press
remote
Angle:
remote
the
(7 m)
from the front of the
the title
screen
installation
Detach the
the buttons.
Distance: About 23 ft
display
discs.)
rear
battery
cover on
of the remote
trol, and insert
two R03
AAA) batteries with
aligned correctly.
sensor
About 30° in each direction of the front of the
con-
(size
and
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
Connections
Connecting
Make
the
to a TV
of the
following connections, depending
capabilities of your existing equipment.
one
ips
Depending
on
Progressive Scan (ColorStream
If your television is
your TV and other equipment you wish
to connect, there are various ways you could connect
the unit. Use one of the connections described
below.
best connections.
connection
high-definition or "digital ready"
television, you may take advantage of the unit's progressive scan output for the highest video resolution
possible.
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the unit.
on
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
pro)
a
Connect the COMPONENT VIDEO OUT
(PROGRESSIVE
SCAN) jacks from the unit to the corresponding in jacks
on the TV using an optional Y Pb Pr cable (C).
Caution
--
Make
sure
the unit is connected
Select the correct AV
--
directly
to the TV.
your TV.
Do not connect your unit to TV via your VCR. The
DVD image could be distorted by the copy protection
input
on
system.
ote
--
Set the
Progressive to "On" on the Setup
progressive signal, see page 17.
menu
for
Rear of TV
Video connection
Connect the MONITOR OUT
VIDEO IN
jack
on
the TV
jack from the unit to the
using the video cable supplied
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
VIDEO
IN
S-VIDEO
IN
(V).
Y
Pr
Pb
L
S-Video connection
Connect the S-VIDEO OUT
the unit to the S-
VIDEO IN
S-Video cable
jack
Component
on
the TV
Video
jack on
using the
(Color Stream )
Connect the COMPONENT VIDEO OUT
(S).
connection
(PROGRESSIVE SCAN) jacks from the unit to the corresponding in
jacks on the TV using an Y Pb Pr cable (C).
S
V
C
COMPON
VIDEO OU
NT
OGRESSIVE
Pr
Y
MONITOR
S-VIDEO
OPTICAL
OUT
OUT
OUT
RL
AUX IN
8
Connections
Connecting
Connect the
to Antenna
supplied
FM/AM antennas for
to
listening
the radio.
-
You
VCR
can use
or
Auxiliary Equipment
other unit connected to the AUX
connector.
Connect the AM
loop
antenna to the AM antenna
connector.
-
to
Connecting
Connect the FM wire antenna to the FM antenna
con-
nector.
1
2
Connect
a
VCR
auxiliary device,
or
etc to the AUX
connector.
Select AUX function
the unit
or
pressing
the AUX button
on
the remote control.
"AUX" will be shown
on
the
display
window.
COMPONENT
VIDEO OUT
(PROGRESSIVE SCAN)
Pr
Pb
Y
MONITOR
OUT
S-VIDEO
OUT
OPTICAL
OUT
RL
AUX IN
To AUDIO IN
COMPONENT
VIDEO OUT
IN
(PROGRESSIVE SCAN)
Pr
OUT
Pb
VIDEO
Y
MONITOR
OUT
S-VIDEO
OUT
OPTICAL
OUT
RL
AUX IN
VCR
AUDIO
(L)
AUDIO
(R)
To AUDIO OUT
(or Auxiliary Device, etc)
otes
To
prevent noise pickup, keep the AM loop
away from the unit and other component.
Be
antenna
fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it
horizontal as possible.
sure
to
as
9
PREATION
Connections
Connecting
to
Optional Equipment
Connecting
to USB
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video
receiver equipped with a multi-channel decoder
(Dolby DigitalTM, MPEG 2 or DTS)
Connect the OPTICAL OUT connector of this unit to the
in
corresponding
jack
on
your
Amplifier
Receiver.
or
USB
Memory, MP3 Player (or
Memory Card Reader, etc.)
Connect the USB port of USB memory (or MP3
player, etc) to the USB connector on the front
1
panel.
2
COMPONENT
VIDEO OUT
Select USB function
on
the front
panel
or on
"USB" will be shown
(PROGRESSIVE SCAN)
Pr
Pb
Y
MONITOR
S-VIDEO
OUT
OUT
OPTICAL
OUT
RL
pressing
on
the USB button
the remote control.
the
display
window.
otes
AUX IN
The DivX files in your memory card will not be able
to be played.
Don't insert the
otes
If the audio format of the
match the
capabilities
produce
strong,
To
see
a
digital output
does not
of your unit, the receiver will
distorted sound or no sound at all.
the audio format of the current unit
On-Screen
Display,
press AUDIO.
in the
than
one
memory card in the
multi card reader.
The unit may not be supported
card or multi card reader.
Don't insert
or
pull
card reader when
If there is
a
part of memory
out the memory card from the
using
the card reader.
memory card in the card reader, it will
be displayed "NO USB". In this status you should
pull out card reader and pull into the set again with
no
memory card.
10
more
Connections
Speaker System
Connect the
Connection
speakers using
the
supplied speaker
cords
by matching
the colors of the terminals and those of the cords.
Front
speaker
(Right)
Front
speaker
(Left)
ote
If TV screen beccomes
discolored do not
front
speakers
place
in 30 cm
from TV.
If you hear the sound from
the subwoofer, press the
SUBWOOFER ON/OFF button to turn the subwoofer
on.
Subwoofer
COMPONENT
VIDEO OUT
(PROGRESSIVE SCAN)
Pr
Y
Pb
MONITOR
OUT
S-VIDEO
OUT
OPTICAL
OUT
RL
AUX IN
WOOFER SYSTEM
SUB WOOFER
ote
SPEAKER
Do not
place the
surround speakers
by TV.
Surround
speaker
(Right)
Surround
speaker
(Left)
otes
Be
are
sure
to match the
speaker
cord to the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cords
reversed, the sound will be distorted and will lack base.
If you use front
the speakers.
speakers
with low maximum
input rating, adjust
the volume
carefully
to avoid excessive
output
on
11
PREATION
Before
Volume
?Turn
MP3
Adjustment
VOLUME knob clockwise to increase the sound
level,
?
Operation
or
counterclockwise to decrease it.
Press VOLUME
VOLUME
to decrease it
-
level,
or use
the remote control.
on
restore. You
the
mute
can
telephone,
sound, press again to
your unit in order, for example,
"
"
to
indicator flashes in the dis-
window.
a
the
Jack
stereo
into the
headphone plug ( 6.3mm)
select
on
when you
and
impressions
adjust
desired sound mode
a
the front
panel
or
by using EQ
EQ PATT. button
on
the
a
FLAT
→
sound mode passes by with the left side from
the right, press EQ or EQ PATT..
JAZZ
→
POP
can
CLASSIC
→
SALSA
ADVENTURE
-You
→
→
select
the front
a
→
MUSICAL
PUMP
mode
→
ROCK
→
→
by using
DRAMA
SAMBA
EXTREME
→
"BASS 0" will be
→
apeared
USER EQ button
more
in the
counterclockwise to select the
on
than 1 second.
display
window.
setting
or
you want.
3. Press the USER EQ button.
the MIDDLE and TREBLE
5. To cancel the USER
MODE,
as
shown above.
press the USER EQ but-
ton until "USER MODE OFF" appears.
XDSS
a
ROUND button
desired surround mode
on
the front
panel
or
by using
SUR-
SURR. button
on
a
HALL
→
→
→
THEATER
CINEMA
→
EALA
VOCAL
→
CHURCH
→
TUNNEL
→
→
→
DISCO
SURROUND OFF...
This function is turned the LED
of
front
in
panel
(Light-emitting diode)
display window by half
off and darken the
power-on status.
Press DIMMER
panel
once.
The LED
(Light-emitting diode)
of
is turned off.
If you press it once more, the display window will be
darken by half. To cancel it press the button again.
DEMO
To cancel
it, press POWER
or
DEMO
demonstration in power-on status you
by using the other buttons.
the sound
Selecting
You
can
can
cancel it
system
enoy different sounds
mode you want.
Turn MODE SELECT button
again. During
by selecting
on
the sound
the subwoofer to select
the sound mode.
LINK ON
→
SURROUND 1
→
SURROUND 2
(Extreme Dynamic Sound System)
Press XDSS to reinforce treble and bass.
The "XDSS ON" indicator
lights up.
To cancel it press XDSS again.
The "XDSS OFF" indicator lights up.
-
select
can
Press DEMO in power off state to demonstrate the
function in the display window.
FLAT...
2. Turn the MULTI JOG SHUTTLE clockwise
Adjust
MP3-OPT OFF
→
→
panel.
1. Press the USER EQ button for
4.
You
front
remote control.
When
setting
DIMMER
choose 12 fixed sound
can
button
the bass sound to make sweet sound.
SURROUND OFF
BASS, MIDDLE and TREBLE.
-You
MP3 file. It
surround mode passes by with the left side
from the right, press SURROUND or SURR..
EQUALIZER Effect
can
compressible
Each time you press MP3 OPTIMIZER the
changes in the following order.
When
headphone jack.
The speakers are automatically disconnected
plug in the headphones (not supplied).
You
for
the remote control.
Headphone
Connect
optimizered
SURROUND Effect
Press MUTE to turn off the
play
improved
MP3-OPT ON
MUTE
answer
This function is
is
to increase the sound
+
Optimizer
Using
You
the subwoofer
can use
the sound of the subwoofer to enhance the
bass.
-
Press SUBWOOFER ON/OFF
on
OAO
(Orientation
Acoustic
Optimizer)
ON/OFF
Press OAO to reinforce the
-
The "OAO
To cancel it
-
The "OAO
12
original sound.
ON" indicator lights up.
press OAO again.
OFF" indicator lights up.
on
the subwoofer to turn
the subwoofer.
SUB_WOOFER ON
SUB_WOOFER OFF
Before
Setting
Operation
the Clock
To cancel
Press CLOCK.
setting
If you wish to stop the function, press the SLEEP button
repeatedly until "SLEEP 10 appears, and then press
"
requires setting, press and
for more than 2 seconds.)
The hours display begins to blink.
(If
Timer
Sleep
the clock
hold CLOCK
SLEEP
once
again
"
after "SLEEP 10
shows
on
the
display.
-
.
Select either the 12 hour
or
the 24 hour
MULTI JOG DIAL.
cycle by turning
(12HR)
cycle
You
sing to a music
microphone to the unit.
Press SET to confirm the selected hour
cycle.
""
Play
2
Use MULTI JOG DIAL to set the current hour.
.
a
on
the
Refer to the
When the clock is not
window, follow
as
appeared
in the
display
below.
the clock is set, prese the CLOCK button.
The clock will be shown in the display window for
about 5 seconds.
as
the clock is not set, the clock will be blinked in
display
using
the
or
microphone,
set the MIC volume
turn off the MIC and
remove
the
may be distorted. In this case, turn the MIC volume
control toward minimum.
window for about 1 minute. Set the clock
above.
To
Timer Function
Sleep
sleep timer is set, the unit automatically
the specified time has elapsed.
off after
To
the time
specify
delay
about 5 seconds. This
automatically
means
40
→
30
To check the
Press the ECHO
echo effect to the sound from the
repeatedly.
ECHO-OFF→ECHO-1→ECHO-2 →ECHO-3
that the
system
turns
after 180 minutes.
→
20 →10
→
give an
microphones.
can
Volume
SLEEP 180 for
see
Each time you press SLEEP the
in the following order.
SLEEP 180 →150
turns
before the power is
turned off, press SLEEP.
In the display window you can
off
Adjust ECHO
You
When the
2
MIC
microphone from the MIC socket.
If the microphone is set too near the speaker, a
howling sound may be produced. In this case, move
the microphone away from the speaker or decrease
the sound level by using the MIC volume control.
If sound through the microphone is extremely loud, it
case
the
window.
using microphone.
"Recording" explanation section.
knob to minimum
case
display
otes
ote
In
to the MIC socket.
music you want.
When not
-
microphone
a
For your reference
You can record during
Use MULTI JOG DIAL to set current minutes.
display.
In
by connecting
VOLUME KNOB.
Press SET and the correct time is shown
-
source
will be shown in the
PREATION
OPTIONAL
Sing along with the accompaniment.
Adjust the microphone volume by turning
3
Press SET.
can
Connect your
1
(24HR)
or
Using Microphone
-
setting changes
120 →90→80→70
→
OFF
remaining
(No display)
→
60→ 50
→
→SLEEP 180...
time until the power is
turned off.
function is active press SLEEP
The time remaining until the unit turns off is
While the
sleep
briefly.
displayed
for about 5 seconds.
ote
If you press SLEEP while the
the SLEEP time is reset.
sleep
time is
displayed,
13
Before
Operation
Timer Function
With the TIMER function you can have the radio reception, CD play, TAPE play and USB play turned on and
off at the time desired.
Press CLOCK to check the current time.
1
6
7
8
Press
2
clock, timer function doesn't work.
flashes in the
CD
(TUNER
display window
→
For your reference
If you want to correct the
previous
press and hold the
2 seconds.
The
"
previous
→
in turn.
memorized TIMER
TIMER button
setting,
-
setting mode.
TAPE
USB)
→
memorized timer
setting
TIMER" indicators appear in the
for
more
on
than
Time and
display.
Press SET when the desired function flashes.
3
1.
4
When you select TUNER
a.
display
window
function,
alternately
for
about 3 seconds.
'PLAY' indicator
:
TUNER
'REC' indicator
:
TUNER
Set the turn off hour time
9
10
11
12
13
14
Set the turn off minutes
Adjust
MULTI JOG
Press SET.
""
appears in the display window and the
timer setting has been completed.
Turn the
system off.
The selected timer functions
switched
To cancel
or
setting
button
and off at the
on
are
automatically
preset times.
check the timer
To activate
TIMER button is
or
pressed
cancel. You
can
you can
also check the
status.
or
check the
repeatedly
so
that
timer, press the
"
"
TIMER
appears in the
display
window.
disappears.
2. When you select CD, TAPE or USB function,
'TIME ON' indicator appears for about 0.5
display
turning
the volume level
and press SET.
'TIME ON' indicator appears for about 0.5
window and then
MULTI JOG
DIAL.
15
timer
turning
Press SET.
select the timer set
panel
MULTI JOG
DIAL.
memorized preset
number with MULTI JOG DIAL on the front
previous
turning
Press SET.
Select the
seconds in the
minutes
DIAL.
Each time the
display
on
time.
function flashes.
seconds in the
MULTI JOG
turning
Press SET to confirm the turn
play only
play and recording
b. Press SET when the desired
c.
minutes time
DIAL.
'PLAY' and 'REC' indicator flash in
the
on
hour time.
disappears.
TIMER to enter the timer
Each function
Set the turn
on
'TIME OFF' indicator appears for about 0.5
seconds in the display window and then
For your reference
If you don't set
Press SET to confirm the turn
window and then
To cancel the
repeatedly
so
TIMER, press the
that
"
"
disappears
TIMER button
from the
display
window.
disappears.
5
Set the turn
on
hour
turning
MULTI JOG DIAL.
ote
In
case
played
14
of
on
disc with menu, the main
the screen.
a
menu
is
only
dis-
Before
Operation
3
Caution:
Before
the remote
using
control, press the DVD/CD
button to select the device to be
General
This manual
operated.
or
on
Title
General
screen.
playback
1
2
status
A-B
title
Repeat
sequence
Resume
/
can
be
displayed on the TV
changed on the menu.
can
be
to select
an
play
from this
prohibited
or
setting.
PREATION
point
not available
Some discs may not
provide all of the features on the
on-screen display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
highlighted.
DVD
Items
Function / Action using
Title Number
Shows the current title number and total number of titles /
1/3
Number
1/12
Time search
skips
Audio
/
to select item
to the desired title number.
Shows the current
chapters
/
Shows the
0:20:09
skips
chapter
elapsed playing
chapter
number.
Subtitle
Shows the current subtitle
/
time / searches
/
by elapsed
ABC
1 ENG
language,
number / changes
language
Sound
changes
angles
or
AUDIO
the set-
/or
S-TITLE
/
angle number
changes the angle.
Shows the current sound mode /
Bypass
/
,Numbers
/or
the
ting.
Shows the current
1/3
or
Numbers, SELECT/ENTER
Shows the current audio soundtrack
and channel
,Numbers
SELECT/ENTER
time.
encoding method,
setting.
Selection Method
SELECT/ENTER
number and total number of
to the desired
language
and Digital Audio
Output mode
Angle
functions,
item.
Example: On-Screen Display during playing
language
some
Notes
during playback.
The selected item will be
Chapter
For
setting
the disc.
display operation
Press DISPLAY
Press
item.
an
Display
Some items
On-screen
of
be also be used for
number).
Repeat
Action
On-Screen
title
can
setting
Te mporary Feedback Field Icons
basic instructions for
is not available
The number buttons
(e.g.,
the
change
press SELECT/ENTER to execute the
operating the
unit. Some DVDs require specific operation or allow
only limited operation during playback.
When this occurs, the symbol
appears on the TV
screen, indicating that the operation is not permitted by
the unit
to
or
numbers
Explanation
gives
Press
and total number of
can
not
change
/
the
setting.
--
Example: On-Screen Display during playing VCD
Items
Function / Action using
Track Number
Shows the current track
1/3
Time
PBC On mode /
Shows the
0:20:09
Audio Channel
skips
/
to select item
number, total number of tracks and
to the desired track number.
elapsed playing
time
Selection Method
/
,Numbers
or
SELECT/ENTER
(display only).
--
Shows the audio channel /
changes
the audio channel.
/or
AUDIO
Sound
Bypass
Shows the current sound mode /
setting.
can
not
change
the
--
15
Before
Initial
Operation
LANGUAGE
Settings
the
By using
Setup
can
make various
menu, you
ments to items such as picture and sound. You
set
for the subtitles and the
language
among other things.
a
item,
To
see
For details
Setup
each Setup
on
display
the
menu.
SETUP will take you back to initial
To go to the next level:
on
on
General
The
menu
The
previous
Original
Disc Subtitle
Off
Disc Menu
Original
/
level:
Select
audio),
appears.
option
then
/
/
Some items
will be shown the current
as
well
as
alternate
setting
setting(s).
to select the second desired
for the
option
to move to the third level.
to select the desired
require
Press SETUP
language
or
for the
Setup
menu
setting
then
steps.
PLAY to exit the
setup
was
on-screen
menu.
DVD
language
Refers to the
original language
(disc
in which the
recorded.
Other: To select another language, press number buttons to enter the
corresponding 4-digit number according to the language code list on page 32. If you enter
the wrong language code, press CLEAR on the remote
control.
to confirm your selection.
additional
and
you prefer for the audio track
subtitles, and the disc menu.
Original:
disc
to move to the second level.
item,
a
display.
to select the desired
screen
Select
OSD
Disc Audio / Subtitle / Menu
4 press SELECT/ENTER
16
Disc Audio
Move
Select the
menu
then press
Use
English
screen.
Operation
selected
Use
OSD
A second press of
the remote control.
setup
2 press
5
menu,
Press SETUP.
Use
3
also
the remote control.
To go back to the
1
can
and exit the Menu:
Press SETUP to
Press
adjust-
pages 16 to 19.
display
Press
LANGUAGE
Before
Operation
DISPLAY
Progressive Scan
DVD
DISPLAY
TV
16:9
Aspect
Display
Mode
Progressive
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.
Widescreen
Scan
Off
To Turn ON
Move
TV
Aspect
a
16:9: Select when
Display
Display
Mode
component out of the DVD to the input of your
monitor/television, set your television or monitor to
Component Input.
1. Select
standard 4:3 TV is connected.
a
"Progressive
then press
16:9 wide TV is connected.
Scan"
on
the DISPLAY
menu
.
DISPLAY
DVD
TV
Mode
scan:
Connect
Select
DVD
4:3: Select when
progressive
setting
works
only
when the TV
Display
Aspect
Off
Aspect
On
Mode
Progressive
Scan
mode is set to "4:3".
Letterbox:
upper and
Displays a wide picture with
lower portions of the screen.
bands
on
the
Prev.
Panscan:
the entire
Automatically displays
the wide
picture
and cuts off the
portions
that do not fit.
screen
Move
Select
on
2. Select "On"
the
using
/
buttons.
3. Press SELECT/ENTER to confirm your selection.
The confirm menu will appear.
4. When the confirm
menu
appears
on
your
screen
Cancel is
5.
/
highlighted as default. Use the
buttons to highlight Enter.
Pressing ENTER will set the player to Progressive
scan
mode.
Caution
Once the
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
1)
Remove any disc from the unit and close the disc
tray. See that "NO DISC" is displayed on the display
window
2)
Press and hold STOP
release it. The video
standard
visible
on a
for five seconds then
output will be restored
to the
picture will once again be
conventional analog TV or monitor.
setting,
and
(x)
a
17
PREATION
Before
Operation
AUDIO
OTHERS
Each DVD disc has
Set the
audio
variety
output options.
player's AUDIO options according to the type
system you
OTHERS
of audio
a
of
use.
PBC
On
DivX(R) Registration
Select
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48 kHz
DRC
On
Vocal
On
Move
PBC
Set
Move
Select
VCD
Playback
Control
/ DTS / MPEG
with
a
Dolby Digital,
DVD
DTS
or
:
Off:Video CDs with PBC
tal stereo
MPEG
a
two-channel
DVDs encoded in
amplifier.
will be automatically
digiDolby Digital or
You
can
Your
Sample Freq. (Frequency)
DVD
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of signal through without any
further processing. Check the documentation for your
capabilities.
Dynamic Range Control (DRC)
hear
code is
this code to
register
the
this
DivX(R)
more
purchase videos
Video On Demand format.
go to www.divx.com/vod
The
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental
Notes
If you rent the DivX VOD file, it has several
viewing limits as show below.
Display
sound-
a
depending
Vocal
only during playback
recorded discs.
Dynamic Range Compression
on
the number which you
can
?
ends when you stop playback,
video, or turn off your player.
Do you want to
use one
The rental has been
a
different
of your 7 views
Yes
?
play
now
No
expired.
expired.
DVD is
The karaoke channels
18
playing.
a
when
a
the authorization
player
play
multi-channel Karaoke
normal stereo sound.
Display
This video
DVD
only
?
on
error.
the disc will
is not authorized to
this video.
options
watch the file.
This rental video has 7 views left. A view
may differ
the DVD disc.
Set Vocal to On
mix into
of
an
encrypt movie file.
Notes
The level of
only.
Video On Demand service.
This rental is
Dolby Digital
as
player with
DRC to On for this effect.
The DRC function works
way
XXXXXXXX
:
DVD
program's
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing dialog intelligibility. Set
can
use
To learn
?
format, you
code for your unit
registration
DivX(R)
using
made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
With the DVD
same
(Digital Right
This will allow you to rent and
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
its
the
downmixed to two-chan-
the
verify
played
to the
DivX
Management) Registration
Please
to
are
show the DivX DRM
nel PCM audio.
amplifier
played according
Audio CDs.
DivX(R) Registration
Select when connected to
are
MPEG
decoder.
PCM
Off.
or
PBC.
Bitstream: Select "Bitstream" if you connect the DVD
Player's DIGITAL OUT jack to an amplifier or other
equipment
to On
(PBC)
On:Video CDs with PBC
Dolby Digital
Select
of
Before
LOCK
Operation
Password
(Parental Control)
You
LOCK
Rating
Unlock
Password
****
2
Follow
control information
certain
scenes on
that may not be suitable
of these discs contain parental
scenes
Many
that applies
to the
step
2
on
the LOCK
shown left
as
menu
then press
(Rating). "Change"
.
or
3
highlighted.
Enter the new 4-digit code, then press
SELECT/ENTER. Input it again to verify.
4
Press SETUP to exit the
complete
the disc. Movies and
menu.
Select
DVD
for children to view.
change password.
Select Password
If you
Some movies contain
or
"New" is
Move
Rating
enter
1
NG
Code
Country
can
(Security Code)
disc
scenes are
or
to
rated
from 1 to 8, depending on the country. Some discs offer
more suitable scenes as an alternative.
forget
your Security Code
If you forget your security code you
the following steps:
1
Input
the
6-digit number
security code is
and the
2
Enter
a new
code
can
"210499"
on
clear it
the
using
setup
menu
cleared.
described above.
as
ote
The
to
control feature allows you to block access
below the rating you input, thereby preventing
parental
scenes
your children from being able to view material you
believe is unsuitable.
1
2
Select
"Rating"
on
the LOCK
appears on the TV screen,
and then press SETUP to move to the
(x)
menu.
Country
Code
DVD
.
Enter the code of the
To access the
Rating,
Password and
Code features, you must input the
security code you created.
If you have not
prompted to do
Input
Enter
yet entered
4-digit code and
it again and press
a
a
Country
4-digit
security
code you
are
so.
a
If you make
press SELECT/ENTER.
SELECT/ENTER to verify.
mistake before
pressing
SELECT/ENTER, press CLEAR.
3
"
INPUT PASSWD
press STOP
setup
then press
menu
When
"
Select
rating
a
from 1 to 8
using
one
(1)
has the most restrictions
is the least restrictive.
If you select
and the disc
unlock, parental control is
plays
whose standards
disc, based
on
the list
chapter.
1
Select
2
Follow
3
Select the first character
using
Shift the
button and select the
press
"Country
Code"
on
the LOCK
menu
then
.
step 2
as
cursor
shown left
using
4 second character using
5
Unlock
used to rate the DVD video
in the reference
/
the
buttons.
Rating 1-8: Rating
and rating eight (8)
were
country/area
(Rating).
/
/
buttons.
buttons.
Press SELECT/ENTER to confirm your country
code selection.
not active
in full.
ote
If you set a rating for the player, all disc scenes with
the same rating or lower are played. Higher rated
not
scenes are
available
on
played
unless
an
alternate
scene
is
the disc. The alternative must have the
rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc.
same
Press SELECT/ENTER to confirm your
4 selection, then press SETUP
rating
to exit the menu.
19
PREATION
with DVD and Video CD
Operation
Playing
General Features
DVD and Video CD
a
Playback Setup
Turn
on
the TV and select the video
input
ote
source
Unless stated
connected to the unit.
Audio
the
1
system: Turn
input
on
the audio
system and select
Press Z OPEN/CLOSE button to open the disc
Moving
tray.
When
to another TITLE
disc has
a
more
than
one
then the
appropriate
number
DVD
title, you
another title. Press DISPLAY while
Load your chosen disc in the tray, with the
playback side facing down.
2
use
the remote control. Some features may also be
available on the Setup menu.
connected to the unit.
source
otherwise, all operations described
(0-9)
can move
playback
or use
/
is
to
stopped
to
move
to another title.
Playing
?
one or
You
two
back is
discs
Place discs
on
Moving
Playing three discs
After placing two discs,
DVD
press the DISC SKIP on
the front panel to rotate the
disc
on
tray
When
If
The
trays.
3.
is
a menu screen
or
may be displayed first after
Video CD which contains a menu.
loading
a
Use the
/
//
buttons to select the
you want to view, then press SELECT/
ENTER to start. Press TITLE or MENU to return to
title/chapter
Use the number buttons to select the track you want
to view and press RETURN to return to the menu
screen.
Menu
settings
and
operating procedures
may differ. Follow the instructions on the each menu
screen. You also may set PBC to Off (See "PBC" on
18).
If
parental control is set and the disc is not within the
rating settings you must input the password.
(See "LOCK" on page 19.)
DVDs may have a region code. Your player will not
play discs that have a region code different from your
player. The region code for this player is 5 (five).
To Select
Press
a
disc
directly
DISC 1, DISC 2
or
DISC 3
during playing
or
stopping.
When you press DISC 1,2 or 3 before playing a disc,
the unit will automatically start playing the selected disc.
20
title
on a
disc has
than
more
as
Press .
or
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
>
/
to select the chappress DISPLAY and press
ter/track icon. Then, input the chapter/track number or
Search
DVD
1 Press FF
player
or
will
or
VCD
DivX
GG during playback.
now
go into SEARCH mode.
GG repeatedly to select the required
speed: mX2, mX4, mX8, mX16, mX100
(backward) or MX2, MX4, MX8, MX16,
MX100 (forward).
With a DivX/ Video CD, the Search speed changes:
mX2, mX4, mX8, mX16 (backward) or MX2,
MX4, MX8, MX16 (forward).
3 To exit SEARCH
Notes
--
a
2 Press FF
VCD
--
DivX
chapter/track
The
menu screen.
page
play-
use/.
DVD
the
its number while
briefly during playback to select
the next chapter/track or to return to the beginning of
the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
displayed
menu screen
DVD
by inputting
to another CHAPTER/TRACK
VCD
disc has
Place the next
Press Z OPEN/CLOSE button to close the tray.
Playback starts automatically. If playback does not
start, press PLAY. In some cases, the disc menu
might appear instead.
3
title
trays
1and2.
?
play any
stopped.
can
mode, press PLAY.
with DVD and Video CD
Operation
General Features
Still Picture and
DVD
Frame-by-frame playback
the remote control
on
during
will
display
repeatedly
by
the remote
on
2 Within 10
con-
trol.
3 To exit still motion
player
the
T
or
mode, press PLAY.
DVD
3 Within 10
VCD
during play-
required speed: t
1/2, t 1/4, t 1/8 or t 1/16 [(backward) DVD
only]orT1/2,T1/4,T1/8orT1/16
(forward).
or
seconds,
required
T to select the
PLAY, press PLAY.
Slow motion
playback
in
reverse
is not
applicable
for
Repeat
DVD
play
can
a
DivX
VCD
title/chapter/all/track
Press REPEAT
during playback
on a
to select
a
desired
use
Title:
?
Off
Playback
does not
right
Track
?
All
?
Off
hours, minutes, and
sec-
in the box.
seconds, press SELECT/ENTER
to confirm
starts from the selected time
invalid
Zoom
time, playback
DVD
the disc. If you enter
will continue from the current point.
on
VCD
1 Press ZOOM
during playback
or
still
playback
to acti-
If you press ZOOM repeatedly, the
increases up to four steps.
magnification
100% size
400% size
(screen
2 Use the
/
fit
→
//
mode)
→
100% size
(screen
fit
level
→
800%
mode)
buttons to
move
through
function may not work for
some
DVDs.
the
picture.
ote
The
zoom
current title.
play repeatedly.
DivX/ Video CDs
?
an
-
repeats the
:
the number buttons to enter
the start time.
zoomed
Repeat Chapter/Title/Off
Chapter: repeats the current chapter.
?
display.
start time. Enter
size→ 1600% size
disc.
mode.
DVD Video Discs
?
to select the Time
vate the Zoom function.
Video CD.
repeat
time of the
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
ote
You
/
on-screen
-
3 To return to normal
elapsed playing
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
4 Within 10
will enter SLOW mode.
2 Use the t
on-screen
screen.
seconds, press
onds from left to
the remote control
on
The
at
The "-:--:--" appears in the Time Search box.
back.
The
on
Search icon in the
the
Slow Motion
1 Press t
appears
during playback.
playing
current disc.
now
PAUSE/STEP
pressing
VCD
The Time Search box shows the
go into PAUSE mode.
advance the picture frame-by-frame
can
DVD
The Time Search function allows you to start
any chosen time on the disc.
1 Press DISPLAY
1 Press PAUSE/STEP
2 You
(continued)
DivX
VCD
playback.
The player
Time Search
-
Repeat
Track/All/Off
repeats the current track
repeats all the tracks on a disc.
:
:
does not
:
play repeatedly.
ote
--OnaVideoCDwithPBC,youmustsetPBCtoOffon
the setup menu to use the repeat function (See "PBC"
on page 18).
Repeat
To
repeat
A-B
a
DVD
sequence in
VCD
a
title:
1 Press REPEAT A-B at your chosen starting
A
appears briefly on the TV screen.
"
point.
"
-
2 Press REPEAT A-B
again at your chosen end point.
"A B" appears briefly on the TV screen, and the
repeat sequence begins.
-
3
To cancel the sequence, press REPEAT A-B.
21
OPERATION
Operation
with DVD and Video CD
General Features
Marker Search
DVD
You
from
nine
can
points
To enter
1
start
playback
Special
VCD
point. Up
to
follow these
steps.
During disc playback, press MARKER when
playback reaches the spot that you want to
The Marker icon will appear
on
the TV
press the
points
Marked Scene
a
disc
During
playback,
The MARKER SEARCH
2 Within 10
If the current title has
press SEARCH.
menu
will appear
/
seconds, press
on
to select
the
a
Marker
2 The
will start from the Marked
remove
menu can
and subtitle
3 To
a
menu, the
Otherwise, the disc
screen.
screen.
3 Press SELECT/ENTER.
4 To
option.
1 Press TITLE.
number that you want to recall.
Playback
an
DVD
Title Menu
To Recall
number button to select
on a
disc.
1
appropriate
/
//
buttons to highlight your
Or, use the
selection, then press SELECT/ENTER.
briefly.
screen
1 to enter up to nine Marker
Repeat step
discs: Menus
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
memorize.
2
DVD
the contents of DVD Video
Checking
memorized
a
DVD Features
be memorized.
can
mark,
a
(continued)
remove
list
menu
menu
will appear
the
on
may appear.
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
again.
scene.
the MARKER SEARCH menu, press
SEARCH.
Disc Menu
DVD
Press MENU.
To clear
1
a
During
Marked Scene
disc
playback,
The MARKER SEARCH
2
Press
want to
3
/
The disc
menu
will appear
on
the
screen.
to select the Marker number that you
Camera
Press CLEAR.
To
remove
SEARCH.
Angle
2 and 3 to
erase
additional Marker
DVD
scenes
angles, you can change
during playback.
to
recorded at different
a
different
camera
1 Press DISPLAY and then press the
numbers.
5
displayed.
If the disc contains
erase.
Repeat steps
is
press SEARCH.
The Marker number will be erased from the list.
4
menu
a
angle
to select
angle.
The number of the current
the MARKER SEARCH menu, press
/
camera
angle
appears
on
the
display
window.
2 Select
a
desired
angle pressing
the Audio
Changing
the
/
Language
Press AUDIO
different
buttons.
repeatedly during playback
audio language or audio track.
to hear
the Audio Channel
Changing
DVD
a
VCD
Press AUDIO
different
repeatedly during playback to hear a
audio channel (STER., LEFT or RIGHT).
Subtitle
DVD
DivX
Press S-TITLE
different
repeatedly during playback
subtitle languages.
to
see
the
ote
If
22
appears, the feature is not available
on
the disc.
with DVD and Video CD
Operation
Mini
Additional Information
Last Scene
This
Memory
memorizes last
player
is viewed. The last
DVD
scene
from the last disc that
The
scene
player. If you load a disc that has the
the scene is automatically recalled.
scene
memorized,
ote
This
player
does not memorize the
you switch off the
disc.
player
for Audio Stream &
Surround mode
remains in memory even if
the disc from the player or switch off the
remove
you
Glossary
before
scene
of
commencing
a
disc if
to
play
the
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital
mark, you
program source. If you play DVDs with
can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range.
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and double-D symbol are trademarks
of Dolby Laboratories.
"
"
BYPASS
Screen Saver
The
Outputs
appears when you leave the DVD
mode for about five minutes.
the sound from the front left and
right speakers
and subwoofer.
screen saver
in
player
Stop
System
Select
For your reference
You can identify the
encoding format of program
software by looking at its packaging.
Dolby Digital discs are labelled with the
logo.
Dolby Surround encoded programs are labelled with
the
logo.
-
You must select the
TV
system. If NO
appropriate system mode for your
DISC appears in the display window,
press and hold PAUSE/STEP on the remote control for
more than 5 seconds to be able to select a system
(PAL,
NTSC
or
AUTO).
When the selected
system
ote
does not coincide with the
system of your TV, normal colour picture may
not be
displayed.
AUTO:
-
When you
the output
play sound
signals will
tracks with 96kHz
be converted to
sampling frequency,
48kHz (sampling fre-
quency).
Select when the unit is connected with Multi
system TV.
NTSC:
Select when the unit is connected with NTSCTV.
PAL:
Select when the unit is connected with PALTV.
23
OPERATION
with Audio CD and MP3/WMA Disc
Operation
Playing
Disc
Audio CD and MP3/WMA
an
MP3
CD
Repeat
You
WMA
can
MP3/WMA formatted
play
CD-ROM, CD-R,
recordings
on
a
track/all
CD-RW discs.
or
audio CD
an
Press
screen.
/
a menu
to select
SELECT/ENTER and
or
0:00:00
a
the
on
appears
Off
?
(No display):
Search
CD
1 Press FF
or
The
Track2
will
player
2 Press FF
Track3
Track4
Track5
Track7
Track8
does not
MP3
play repeatedly.
WMA
go into SEARCH mode.
now
or
GG repeatedly to select the required
3 To exit SEARCH
MP3 / WMA
MP3 / WMA disc
to select
SELECT/ENTER to
/
repeat mode.
speed: mX2, mX4,mX8 (backward)
MX4, MX8 (forward).
Track6
Press
desired
GG during playback.
Program
Track1
2.
a
1/12
List
/
repeat icon
starts.
Audio CD
Press
disc. The
repeats the current track
ALL: repeats all the tracks on a disc.
track then press
playback
a
TRACK:
?
Once you insert
WMA
disc.
playing
2 Press REPEAT to select
Audio CD
1.
on a
MP3
CD
appears.
?
PLAY
play
can
1 Press REPEAT when
The unit
TV
Track/All/Off
folder, and press
limited
the folder contents.
see
to select
SELECT/ENTER.
a
a
?
track then press PLAY
Playback
or
starts.
or
MX2,
mode, press PLAY.
compatibility
with this
player
is
follows:
as
within 32
48 kHz (MP3),
Sampling frequency:
within 24 48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
40
192kbps (WMA)
The player cannot read an MP3/WMA file that has a
file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which cre-
-
?
-
-
1/104
0:00:00
?
MP3 / WMA
List
Program
1-Music1
?
2-Music2
3-Music3
?
4-Music4
5-Music5
6-Music6
7-Music7
ates
?
otes
?
If you
are
in
a
file list
on
the MP3/WMA
menu
and want
?
to return to the Folder
the
on
?
?
list,
use
the
/
to
stop mode and press SELECT/ENTER.
Press MENU to go to the next page.
On a CD with MP3/WMA file and JPEG
switch MP3/WMA and JPEG
the
menu.
stop mode and MP3/WMA
of the
menu
MP3/WMA
Pause
is
or
or
highlighted. Then,
MP3
CD
press PLAY
to another Track
>
briefly
In
CD,
the track number
during playback.
24
to select
press
incorporate
They
should not
CD
to
step back
to go
using
or
MP3
WMA
directly
to return to the
to the
previous
to any
track,
the numbered buttons
a
maximum of 8 letters and
.mp3 or .wma extension.
contain special letters such as
an
The total number of files
on
This DVD
player requires
/ ?
the disc should be less
discs and
track.
enter
(0-9)
recordings
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including
CD-R containing MP3 or WMA files) and these require
certain pre-existing conditions (see above) to ensure
compatible playback.
Customers should note that
briefly during
Press . twice
of audio
or
must
required
playback to go to the next track
beginning of the current track.
case
top
on
during playback.
playback,
PAUSE/STEP again.
or
on
WMA
2 To return to
Press .
/
should have
can
Press TITLE
use
names
system.
than 999.
file, you
JPEG word
ISO 9660 file
*:"<>letc.
?
JPEG then press SELECT/ENTER.
1 Press PAUSE/STEP
Moving
highlight
File
an
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always
be
sought
from the
copyright
owner.
Operation
Viewing
This unit
with JPEG Disc
JPEG disc
a
Slide Show
JPEG
Use
play discs with JPEG files.
Before playing JPEG recordings, read the
JPEG Recordings on right.
can
Insert
notes
on
/
//
disc and close the tray.
The JPEG menu appears on the TV
highlight
to another File
Press .
screen.
to
the
(Slide Show)
then press SELECT/ENTER.
Moving
a
JPEG
or
>
once
advance to the next file
JPEG
during viewing a picture
or to the previous file.
OPERATION
to
JPEG
List
Still Picture
Preview
JPEG
JPEG Folder 1
1 Press PAUSE/STEP
JPEG Folder 2
JPEG Folder 3
The
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
JPEG Folder 8
2
/
Press
to select
player
To rotate
folder, and press
SELECT/ENTER. A list of files in the folder
a
Press
appears.
will
during
slide show.
picture
now
picture
/
JPEG
during showing
clockwise
or
a
picture
to rotate the
counter-clockwise.
Tip
If you
list,
"
are
file list and want to return to the Folder
/
buttons
on
the remote to
highlight
JPEG disc
as
?
and press SELECT/ENTER to return to the
previous
3
a
the
use
"
in
menu screen.
If you want to view
a
upon the size and number of JPEG
files, it could take a long time for the DVD player to
read the disc's contents. If you don't see an on-
Depending
after several
display
/
to
file and press
PLAY.
highlight
a
or
While
move
?
viewing a file, you can press STOP(x)
to the previous menu (JPEG menu).
to
of the
Press MENU to
move
to the next page.
The total number of files and folders
are
(Slow),
Use
/
/
four Slide
>>
Speed options: :
(Normal), >>> (Fast) and
//
to select the
Some discs may be incompatible due to
recording format or the condition of disc.
?
Ensure that all the selected files have the
II
?
(off).
highlight the Speed. Then, use
option you want to use then press
to
into the CD
different
".jpg"
layout.
Off, Slide Show is
not
If the files have
rename
to
Speed option
copying
a
:
SELECT/ENTER.
If you set
active.
the disc
?
extensions when
There
on
should be less than 999.
Tip
?
some
burn another disc.
Speed
is not Off.
option
>
minutes,
files may be too large
reduce the resolution of
the JPEG files to less than 2760 x 2048 pixels and
Slide Show starts from the selected file if
?
is limited
player
---
SELECT/ENTER
?
with this
follows:
screen
particular file, press
compatibility
?
File
them
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
".jpg" extension will not be able
to be read by this DVD player. Even though the
files are shown as JPEG image files in Windows
Explorer.
names
without
25
Programmed Playback
The
MP3
CD
WMA
function enables you to store your favorite tracks from any disc in the
A program can contain 300 tracks (Audio CD/MP3/WMA).
Program
Insert
1
a
disc.
Repeat Programmed
You
Audio CD and MP3/WMA Discs:
Audio CD
MP3/WMA
or
menu
1/12
0:00:00
appears
0:00:00
Audio CD
as
Program
play
Program
?
Music8
Track1
Track8
Track2
Track3
Music1
Music16
Track3
Track12
Music2
Music5
Track4
Track7
Music3
Music9
Track5
Track6
Music4
Music1
Track6
Track9
Music5
Music7
Track7
Track1
Music6
Music6
Track8
Track10
Music7
Music3
?
?
MP3/WMA Menu
title/chapter/all/track
a
2
a
track
disc. The
desired
a
Off(No display):
a
1 Use
/
erase
does not
Track from
repeat icon
repeat mode.
//
from the
the
Program
List
to select the track that you wish
list.
Program
Or, select
list.
play repeatedly.
Program
"
Press SELECT/ENTER to
the List.
on
a
disc.
repeats the current track
ALL: repeats all the tracks on a disc.
2 Press CLEAR.
Select
playing
on a
TRACK:
Erasing
to
memory.
Tracks
appears.
2 Press REPEAT to select
1/104
List
Audio CD Menu
can
1 Press REPEAT when
below.
MP3 / WMA
List
player
Repeat
(Delete)" icon then
place the selected track
to
erase
additional tracks
on
on
the list.
"
3
Press PROG./MEMO. Or, select
(Add)" icon
then SELECT/ENTER to place the selected track
on
the
tracks
Program
on
list.
Repeat
to
place
additional
the list.
Erasing
Select
You
can
add all tracks in the disc. Select
(Add All)"
icon then press SELECT/ENTER.
4
Select the track you want to start
Program list.
playing
on
the
Tip
Press MENU to
move
Press PLAY
or
to the next page.
SELECT/ENTER to start.
5 Playback begins
in the order in which you prothe tracks and "PROG." appears on the
grammed
display window. Playback stops after all of the
tracks on the Program list have played once.
26
Complete Program
"
List
(Del all)", then press SELECT/ENTER.
complete Program for the disc is erased.
ote
"
the
The
ote
The programs
To
resume
Select
are
also cleared when the disc is removed.
normal playback from
the List then press SELECT/ENTER.
"PROG." disappears from the display window.
a
track
programmed playback
on
with DivX Disc
Operation
The unit
play
can
Insert
the DivX files.
DivX disc
disc and close the tray.
The DivX menu appears on the TV
1
as
a
0:00:00
screen.
compatibility
with this
player
is limited
follows:
?A vailable resolution size of the DivX file is under
720x576
1/12
(W
x
H) pixel.
DIVX
?
List
The file
name
of the DivX subtitle is available
20-40 characters
Movie Folder 1
Movie Folder 2
Movie Folder 3
?
Movie Folder 4
Movie Folder 6
from
If there is
impossible code to
may be displayed as
"
file, it
Movie Folder 5
(differs
by
language).
express in the DivX
mark on the dis"
_
play.
Movie Folder 7
Movie Folder 8
?
If the number of the screen frame is
1
2
/
Press
to select
SELECT/ENTER to
a
see
folder, and press
?
the folder contents.
second, this unit may
not
over
30 per
operate normally.
If the video and audio structure of recorded file
is not interleaved, either video
or
audio is out-
putted.
Tip
If you
list,
?
are
in
file list and want to return to the Folder
a
the
use
/
"
highlight
the previous
"
buttons
on
the remote control to
and press SELECT/ENTER to return to
menu screen.
If the file is recorded with
ports
*
some
3
/
to
highlight
SELECT/ENTER
or
a
file and press
PLAY.
starts.
Playback
encoders, like DivX
are
Playable
or
Xvid, have this option.
different levels of GMC
1-point, 2-point,
a
of the record level.
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
There
particular file, press
1-point
GMC?
MPEG4
If you want to view
of
GMC, the unit sup-
or
3-point
encoding, usually
called
GMC.
DivX subtitle file
z ".srt ", ".smi ", ".sub ".
otes
Be
sure
to select "SUBTITLE ON" mode
subtitle file every time before
When the subtile has
original
subtile is
only
more
playing
than two
a
by pressing
DivX file
languages
the
.
in the
available.
play.
General
screen.
".mpg ", ".mpeg
Playable
Codec format
status
can
be
displayed
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ", "MP42 ".
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
?
Sampling frequency: within 32 48 kHz
during playback.
playback
z ".avi ",
Playable
DivX
Press DISPLAY
DivX file
file,
The DivX files in your memory card will not be able to be
Display
Playable
-
on
within 24
the TV
?
Bit
40
(MP3),
48kHz
(WMA)
rate: within 32
320kbps (MP3),
192kbps (WMA)
-
-
-
27
OPERATION
with RADIO
Operation
Presetting
the radio stations
You
50 stations for FM and AM.
preset
can
Before
tuning,
sure
Press TUNER/BAND
FM
or
AM in
to show either
(or TUNER)
the display window.
Every time you press
changes alternately.
this
2 the frequency indication
starts to
panel
change.
front
panel or TUN. ( /
Scanning stops when
the next
until
3
)
the
on
the remote control.
on
the unit tunes in
a
station.
Tuning
PROG./MEMO.
preset
on
on
the front
panel
or
For manual
?
For
number will flash in the
tunes in
remote
control)
(or
display
PRESET
to select the
Press PROGRAM/MEMORY
PROG./MEMO.
on
Repeat steps
non-preset radio stations
on
/
on
select another
AUX
USB).
or
panel
or
the remote control.
noisy
Press MODE/RIF repeatedly so that
disappears in the display window. There will be no
stereo effect, but the reception will improve. Press
MODE/RIF again to restore the stereo effect.
"
preset number
the front
(TAPE, DVD/CD,
or
For your reference
If a FM program is
window.
?
The station is stored.
"
To
improve reception
Reposition the supplied
antennas.
2 to 5 to store other stations.
otes
Use MODE/RIF
to switch to
To clear all memorized stations
Press and hold PROGRAM/MEMORY
the front
panel
for about two seconds, "CLEAR appears in the display
window and then press STOP (x) on the front panel,
on
"
the stations
are
cleared.
the
To recall
entered, "FULL"
preset number, follow the steps
the remote
ber appears
28
or
control)
(or
a
4-5
PRESET
until the desired
press the button
AM
broadcasts, if noises
occurs, press MODE/RIF once.
When receiving the MW (AM) broadcast, beat noises
occur.
AM-NOISE ON
.
preset numbers
Press and hold PRESET DOWN/UP
on
While
by noise.
recording weak
If it
does, press AM-NOISE button
once.
message will appear in the display window for
moment and then a preset number will flash.
change
(Radio Interference Filter) function
Mono reception if stereo reception is
distorted
may be
For your reference
If all stations have already been
To
button, the unit
Press POWER to turn off the unit
you want.
6
want.
tuning, see "Manual Tuning".
automatic tuning, see "Automatic Tuning".
function mode
the remote control.
Press PRESET DOWN/UP
5
the
Adjust the volume by rotating VOLUME knob
(or pressing VOLUME -/+ on the remote control)
repeatedly.
?
?
4 the
on
To turn the radio off
Press PROGRAM/MEMORY
A
/
preset station.
To listen to
Use the MULTI JOG DIAL.
3
the remote
(or PRESET
control) repeatedly to select
Tuning
Press the AUTO TUNING DOWN/UP buttons
Manual
Press PRESET DOWN/UP
preset station you
the front
on
select either
The last received station is tuned in.
otes
-
FM in the
or
(or TUNER) to
display window.
Each time you press this
Turn the MULTI JOG DIAL
Automatic
AM
2
button, AM and FM
to the radio
Press TUNER/BAND
1
that you have turned the voldown to the minimum level.
ume
make
Listening
preset
repeatedly.
/
num-
AM-NOISE OFF
with RADIO
Operation
RDS Function
About RDS
OPTIONAL
-
Programme
A
OPTIONAL
-
This unit is
equipped with RDS (Radio Data System),
which brings a wide range of information from FM radio.
RDS is a system for transmitting station call signs or
network information, a description of station programme
type text message about the station or specifics of
Search (PTY)
-
OPTIONAL
ability to encode broadcasts with Programme Type (PTY) codes that indicate
the type of material being broadcast. The following list
major
benefit of RDS is its
shows the abbreviations used to indicate each PTY
along
with
an
explanation
of the PTY.
OPERATION
musical selection and the correct time.
RDS
Tuning
When
-
OPTIONAL
containing RDS data is tuned in, the
unit will automatically display the station's call sign and
the RDS indicator will light in the Display Window as
well as indicators for the programme type recognition
(PTY), Radio Text (RT), Clock Time (CT) and RDS
services programme (PS) if transmitted by the station.
RDS
FM station
a
Display Options
The RDS
-
OPTIONAL
system is capable of transmitting
a
wide
of information in addition to the initial call
variety
that appears when
RDS operation the
a
broadcast network
or
front
panel
data
types
station is first tuned. In normal
will indicate the station name,
call letters. Pressing RDS on the
display
enables you to cycle
in the sequence:
FREQUENCY
(PS
PTY
sign
PTY
the various
through
RT
CT)
(Programme type recognition)-
The programme type is shown on the display window.
RT (Radio text recognition)- The radio station's
displayed on the display window.
(Time controlled by the channel)- Enable
name
CT
is
unit to receive the actual time and show it
on
the
the
display window.
PS (Programme Service name)- The programme
title is displayed on the display window.
You may search for a specific
by following these steps:
ote
Some RDS stations may not choose to include some of
these additional features. If the data required for the
selected mode is not
Window will show
a
PS NONE message.
being transmitted,
PTY
the
Display
NONE, RT NONE, CT NONE,
1
2
Press TUNER
mode.
Programme Type (PTY)
(or TUNER/BAND)
Select a desired station
TUNING DOWN/UP.
by pressing
When the RDS transmission is
AUTO
received, the
shows the program service
RDS indicator appears.
display
3
4
to select FM
name
after
(PS)
Press the RDS to select PTY mode.
To search for
a
different PTY, press the PRESET
DOWN/UP while the last PTY in use is still dis-
played
to scroll
through
the list of available PTY
types.
5
When the PTY is
selected, press AUTO TUNING
DOWN/UP within 5 seconds.
The unit will go into an automatic search mode and
attempt to find the next station with acceptable
signal strength
that matches the desired PTY
type.
29
with TAPE
Operation
Basic
1
2
3
To
Playback
Press TAPE1-2
"
(or TAPE)
("NO
TAPE
Open
cassette TAPE1-2
appears in the
PUSH EJECT
Insert
to select
to the
To
position.
tape side
the bottom and then close the TAPE 1
to
(and/or 2)
door.
4
Press G
(or F: OPTIONAL).
)
on
panel or TAPE STOP(
during playback.
the front
Play
Rewind
After press FF/GG
or
on
Fast Forward
the front
panel
:optional)
select direction of the cassette you want
pressing PLAY MODE.
by
Function
1
2
To
After the cassette of TAPE 1
or reverse
the
during playback, press G (or F
the tape position you want.
at
Press TAPE1-2
1/2) : OPTIONAL
can
Display
or on
remote control
This function shows how to record from
AUTO REVERSE DECK (TAPE
)
Dubbing
AUTO STOP DECK (TAPE 1/2)
After auto stop deck plays front side of cassette, the unit
stops automatically.
You
STOP(
the remote control
on
display window.)
two cassettes with the
one or
Press
tape function.
by pushing
Stop Play
2
or
plays
(backward play) side, stops
tape
to
tape.
(or TAPE).
?
Cassette TAPE 1- Insert the
?
Cassette TAPE 2- Insert
a
playback tape
blank
tape
to dub.
to copy
on.
Press NOR-DUBB./HI-DUBB..
?
NORMAL DUBBING
?
HIGH DUBBING
-
-
Normal
Double
speed copying
speed copying
stop recording, press STOP (x).
front
auto-
matically.
After the cassette of TAPE 1
and
reverse
After the cassette of TAPE 1
times
repeatedly
automatically.
After
a
2
plays
side, stops automatically.
front and
or
or
2
reverse
cassette of TAPE 1 and 2
times
repeatedly
automatically.
front and
plays
six
side, stops
plays
reverse
front
six
side, stops
Recording
Basic
CD to
Setting
Select
function you want to record except tape
function.
a
1
Open the
2 blank
cassette deck TAPE 2 and insert
cassette into the cassette
Set the
recording
Press PLAY MODE
direction
OPTIONAL
:
repeatedly
to set the
recording
direction.
Recording
1
from
Radio, CD
Press zREC/PAUSE
on
on
or
Auxiliary
the front
panel
or
z/[]
"PAUSE" and "REC" flashes and holds the cassette
2
Press G
The
(or F: OPTIONAL).
recording begins.
To pause the recording
Press z/[] or zREC/PAUSE.
To
Stop
Press
30
the
recording
STOP(x).
a
complete
and
a
cassette.
1
2
synchro recording function dubs
programmed titles automatically into
Press DVD/CD button
3
on
CD
the remote
control.
Press CD SYNC. in stop mode.
"REC" flashes and "CD SYNC" displays in the dis-
play
source
the remote control.
in pause mode.
The CD
a
compartment.
Tape Synchronized Recording
window.
The
synchronized recording is started
automatically after about 7 seconds.
otes
If you wish to record from the desired track, select
the desired track with MULTI JOG DIAL before
commencing CD synchro recording.
A function change is not possible during
recording.
Troubleshooting
Check the
following guide
for the
possible
cause
of
before
problem
a
contacting
service.
Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
Plug the power
securely.
The power is on, but the
unit does not work.
?
No disc is inserted.
?
Insert a disc. (Check that the DVD or, audio
CD indicator in the DVD display is lit.)
No
?
The TV is not set to receive DVD
?
Select the appropriate video input mode on
the TV so the picture from the unit appears
on the TV screen.
?
Connect the video cable into the
picture.
signal
out-
put.
?
The video cable is not connected
securely.
cord into the wall outlet
jacks
securely.
There is no sound or only
a very low-level sound is
heard.
?
The connected TV power is turned off.
?T
?
The equipment connected with the audio
cable is not set to receive DVD signal output.
?
Select the correct input mode of the audio
you can listen to the sound from the unit.
?
The audio cables
?
Connect the audio cable into the
not connected
are
securely
The
playback picture
is poor.
The unit does not start
The power of the equipment connected with
the audio cable is turned off.
?
The audio
connecting
cord is
damaged.
the TV.
so
jacks
securely.
.
?
urn on
?T urn on the equipment connected with the
audio cable.
it with
?
Replace
?
Clean the disc.
new one.
?
The disc is
?
No disc is inserted.
?
Insert a disc. (Check that the DVD, or audio
CD indicator in the DVD display is lit.)
An
?
Insert a playable disc. (Check the disc
color system and Regional code.)
down.
?
Place the disc with the
within the
?
Place the disc on the disc
inside the guide.
?
Clean the disc.
?
Press the SET-UP button to turn off the
dirty.
playback.
?
unplayable
?
The disc is
?
The disc is not
?
placed upside
The disc is
?Amenu
disc is inserted.
placed
guide.
is
dirty.
on
the TV
screen.
playback
type,
side down.
tray correctly
menu
screen.
Severe hum
heard.
or
noise is
?
The
Rating
?
The
plugs
and
jacks
?
The disc is
?
The speakers and
connected poorly.
?
are
Cancel the
ing level.
?
level is set.
?W ipe them with
with alcohol.
dirty.
dirty.
components
are
function
Rating
?
Clean the disc.
?
Connect the
a
cloth
speakers
or
slightly
and
the rat-
change
moistened
components
securely.
The unit is located with too close to the TV.
Move your TV away from the audio compo-
?
nents.
Radio stations cannot be
tuned in.
?
The antenna is
positioned
or
connected
poorly.
?
The signal strength of the stations is too
weak (when tuning in with automatic tuning).
?
No stations have been preset or preset stations have been cleared (when tuning by
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
antenna if necessary.
?T
une
in the station
?
Preset the stations.
an
external
manually.
scanning preset stations).
The remote control does
not work
The disc
opened.
?
The remote control is not pointed at the
remote sensor of the unit.
?
Point the remote control at the remote
of the unit.
?
The remote control is too far from the unit.
?
Operate
(7 m).
?
There is an obstacle in the path of the
remote control and the unit.
?
Remove the obstacle.
?
The batteries in the remote control
exhausted.
?
Replace
?
The DVD/CD function is not selected.
?
Select the DVD/CD function
properly.
tray is
not
are
sensor
the remote control within about 23 ft
the batteries with
new ones.
by pressing
the
DVD/CD button. And then press the
Z OPEN/CLOSE button.
31
REF NC
Language Code
Enter the
appropriate
(See page 16).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
32
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
19).
Code
Country
Code
Country
Code
Country
Code
Country
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
FI
Finland
LR
Liberia
SG
Singapore
AI
Afghanistan
Antigua and
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
GF
ML
Mali
SU
Former USSR
BA
Azerbaidjan
Bosnia-Herzegovina
Georgia
French Guyana
GH
Ghana
MM
Myanmar
SV
El Salvador
BB
Barbados
GI
Gibraltar
MN
Mongolia
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
French Southern
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
Malaysia
TN
Tunisia
BS
Bahamas
GY
MZ
Mozambique
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
BZ
Belize
HR
Croatia
NG
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nigeria
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA
CI
Ivory
Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
Territory
OM
Oman
UY
Uruguay
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
CS
Former Czechoslovakia
JM
Jamaica
PH
Polynesia (French)
Papua New Guinea
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Kenya
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
DE
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
AG
Barbuda
Verde
Republic
Republic
Georgia
& S. Sandwich
(USA)
Islands
Anguilla
Mayen
Islands
Republic
Principe
Territories
(French)
Tobago
Kingdom
Minor Outlying
Islands
Miquelon
(French)
City
State
Grenadines
Islands
Islands
(British)
(USA)
33
REF NC
Specifications
General Section
Power
Refer to the main label.
supply
consumption
Power
200 W
Weight
External dimensions
(W
x
H
x
D)
8.5
kg
280
x
370
x
400
mm
Tuner/Amplifier Section
FM
AM
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Output
Power
87.5
60/55 dB
60
(Mono/Stereo)
30 dB
120
2000 Hz
-
Front:270W+270W(6Ω,THD10%)
Surround:110W+110W(6Ω,THD10%)
Subwoofer: 350 W (6Ω, THD 10 %)
Cassette tape
20000 Hz
-
80 dB
player/DVD/VCD/CD player
Section
player
Frequency response (audio)
Signal-to-noise ratio (audio)
Signal-to-noise ratio (video)
Dynamic range (audio)
output
Video
Cassette tape
100
18000 Hz
-
More than 70 dB
More than 60 dB
(1 kHz)
(1 kHz)
More than 70 dB
1.0 V
output
output
(p-p), 75 Ω
(Y) 1.0 V (p-p), 75 Ω
(C) 0.3 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync.,
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack
RCA
jack
x
1
2
x
player
Tape Speed
Wow Flutter
F.F/REW. Time
3000
±
3 %
125
8000 Hz
(MTT-111. NORMAL-SPEED)
0.25 % (MTT -111, JIS-WTD)
120 sec (C-60)
Frequency Response
Signal to Noise Ratio
Channel Separation
40 dB
Erase Ratio
55 dB
Speaker
87.5 -108.0 MHz
450 kHz
Frequency Response
Signal-to-noise ratio
Component
MHz,
522-1620kHzor520-1720kHz
42
S-video
65 -74
10000 Hz
-
0.7 %
Video
or
10.7 MHz
T. H.D
DVD/VCD/CD
108.0 MHz
-
-
50 dB
(P/B)/45 dB (R/P)
(MTT-5511)
Section
Surround
Speaker
Name
Type
Impedance
Frequency Response
Sound Pressure Level
Rated
Input Power
Max. Input Power
NetDimensions(WxHxD)
Weight (1EA)
34
Front
Speaker (L/R)
Bass Reflex
3Way 3Speaker
Speaker (L/R)
Bass Reflex
6Ω
55
-
2Way 2Speaker
Bass Reflex
24Ω
20000 Hz
86 dB/W
Subwoofer
(1m)
60
-
6Ω
20000 Hz
86 dB/W
1Way 1Speaker
(1m)
45
-
15000 Hz
84 dB/W
(1m)
270 W
110 W
350 W
540 W
220 W
700 W
250X300X415mm
9.8
kg
187X258X415mm
4.3
kg
279X320X415mm
11.9
kg
P/NO
:
3834RH0119Q
Download PDF

advertising