LG | WF-T1081TP | LG WF-T1081TP Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODEL
:
WF-T1081TP
(H)
WF-T1181TP (H)
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
cover
information to your dealer when you
and
require
quote this
service.
Product Features
CAUTION
"Turbo Drum" washer doesn't operate during the lid opened. When the lid is
open during the wash, rinse and spin cycle, the operation stops for safety.
Fuzzy logic control
A load
set
sensor
&
a
micro processor in the controller detect laundry load and
conditions such as water level, wash time etc.
optimum washing
The most advanced
technology in
system provides
best washing performance.
electronic control
the
Turbo drum
When "Punch
SENSING
START
SETTING
Laundry Sensor
Water Level Sensor
Optimum
WASHING
Washing
Condition
washing
washing wings turns, the washing
tub turns in the opposite direction. This makes the both
sides current of water which improve wash-performance by rubbing clothes strongly.
3
3"
+
Step washing
3
step washing makes best washing performance with low tangling.
Rubbing
Innovated
Rubbing
Shaking
and
and
washing wings
Three small
washing wings generate strong and
sharp washing currents to clean laundry uniformly.
Adjusted vertical movement and rotating direction
of the washing punch reduces laundry entanglement
and improves washing power.
Device for
removing naps
Lint filter catches naps and thread generated
washing to make the laundry cleaner.
2
during
Shaking
Disentangling
AUTO
POWER
OFF
Contents
Special
Attention for
Safety .......................................................................4
Name of Each Part ....................................................................................7
Installation .................................................................................................8
Function of Each Button ..........................................................................12
Normal and Jean Wash
Program
Speedy Wash Program
...........................................................................16
Wool and Delicate Wash
............................................................14
Program
..........................................................18
Delay Start Washing Program .................................................................20
Soak Wash
Program
Favourite Wash
Selectable
...............................................................................22
Program.........................................................................24
Washing
Methods ..................................................................26
Water Level and Amount of
Detergent ....................................................28
How to Use the Bleach and the Softener ................................................29
Basic of
Selecting
Maintaining
Each Button and Child Lock Selection .......................30
the Washer ...........................................................................31
Troubleshooting Guide
Specifications
............................................................................33
..........................................................................................35
3
Special
Attention for
Safety
Following signs of special attention for safety are to prevent from unexpected danger
damages by using the washing machine properly and safely.
of
It is classified into "caution" and "attention".
This
signs
for
are
possible
situation of
follow the direction to avoid any
Caution
:
There
signs
Attention
:
might
are
There
have
They
be
meanings
dangerous
damages.
possible
of
following.
items and
operation.
circumstances for serious
injury
Please read
of
even
carefully
and
death, when this
violated.
might
be
possible
circumstances for
light injury
or
damages
of the
product.
Caution
Please ground it or connect to circuit breaker before
inserting power plug into outlet.
If it's not grounded, machine troubles of electric
shock
can
be occurred in
case
Please pay attention to children not to climb up
injured
or
washing
or
causes
injury.
or
to
Do not
put your foot
Spin part
fall down.
hands under
product
washing
machine.
can cause
injury.
Do not operate near places where there are ignitability, gasoline benzene and flammable gas leakage and
do not wash any flammable strained
clothes. It can causes
explosion
4
or
underneath of the
spin part.
machine when you
use
prop.
Possible to get
repairing when spin doesn't stop within
opening the washing machine lid. It
15 seconds after
of short circuit
get into the product.
Possible to get injured by falling
Be careful not to fall into
Please ask for
of fire.
Do not
operate it when the plug is loose.
Damaged plug
Do not
can cause
electric shock
put your hands in during
use or
or
fire.
before it
stops
com-
pletely.
You
is
get injured
can
caught
Do not
hands
place
it
near
can
Do not
place washing
exposed
places
for rain & wind.
electric
heaters, candles,
or
gas leak.
firearms.
& cord
Do not
machine in wet
places
or
shock, fire, machine trouble and
transformation
plastic
caused fire
a
Electric
in the clothes.
Transformation of
melting
as
Please open the window to let fresh air in when
cause fire, explosion or burn.
Spark can
can
be caused.
sprinkle water to the body
Electric shock & fire
can
of
washing
machine.
be caused.
or
electric shock.
Do not
put any magnetic stuff
on
the
top of the washing
machine.
Fallacy of operation
injury.
can
cause
Do not
use on
Do not
disjoint or
rebuild
washing
machine
except techni-
cians.
outlet for many machineries.
can cause fire.
Over usage of outlet
Fire, electric shock
can
be
caused.
Do not
damage the power cord by placing heavy things
covering it.
If the cord is damaged, it can
it
on
or
cause
fire
or
electric shock.
5
Attention for
Special
Safety
Because the
product is quite heavy, so more than
people should carry it when untie or place it.
Damage or injury can be caused by
dropping or striking.
Do not press a pin or awl.
It can cause electric shock.
Place it
Check if there is dusts
two
on
Vibration
flat and solid floor.
or
noise
can
be caused.
on
if there is dusts
pletely,
unstable,
a
fire
can
on
the
the
plug then insert it complug or connection is
be
caused.
Do not
place
any
heavy things
on
the
top of it.
Turn the
If
tap
on or
screws are
check connection.
loose,
water leaks and that can
electric shock
cause
or
injury.
Handle the
It
causes
plug
and switches with dried hands.
electric shock
or
ignition.
Do not
use more
Plastic
parts might be transformed
damaged
that
than 70°C hot water.
causes
or
electric
shock short circuit.
Do not wash the
Abnormal tremor
watherproof clothes or fabrics.
can cause injury during spin.
Pull out the
use
for
long
plug during cleaning
time.
Water and dusts
can cause
electric shock and short
circuit
by ignition
calorification.
6
or
or
when you don't
Name of Each Part
Inlet hose
Control button
Start/Pause button
Power
LIGHT
S
HEAVY
SML
FAVOURITE
X
COLD
HOT
LEVE
plug
K
WATER
WASH
I
MN
LEVEL
WATER
TEMP.
ME
RINSE
NOINLET
DOOROPEN
DELICATE
DELAY/IMELEFT
WOO
N
MIN
SPIN
-
M
DELAY
SPEED
AUTO
START
OFF
PAUSE
JEAN
NO
DRAIN
Lint filters
Power switch
Bleach inlet hole
Drain hose
(Pump model)
High-intensity
washing tub
stainless
Powder detergent box
for delayed washing/
softener box
Level indicator
Drain hose
(Non-Pump model)
Washing wings
Adjustable leg
Accessories
Height adjustment
plate
Inlet hose
Drain hose
or
1 Each for cold and
2 Pieces
hot water
7
Installation
Pump
1Fit
Model
the end of the drain hose to the outlet of the drain pump and
2Put
the other end of the drain hose
over
the
standpipe
tighten
the
clamp.
wash tub.
or
Hose
Guide
Within
50 mm
NOTE:
To
prevent syphoning, the drain hose should
more
The
than 50
not extend
from the end of the hose
mm
discharge height
should be
guide.
approximately 0.9~1.2m
0.9~1.2m
Drain Hose
from the floor.
Non-Pump
Model
1Before connecting
Ensure that the hose
clip
is set
as
indicated here.
Clip
2Connect
the Elbow Hose
Push the elbow hose toward the
3Place
body
of the
washing
machine.
the Drain Hose
To
change the direction of
change the direction.
Repeat Step 2.
the
hose,pull
out the elbow hose
and
Flooding drainage
Your machine
requires
a
floor
drainage slope (or hole)
that will SAFELY DISPOSE of the FULL FLOW of
any water that may leak out the machine malfunction.
It is therefore the OWNER'S RESPONSIBILITY to make
drain hole
(or slope)
that will
prevent any possibility of
sure
water
Do not install the washer where it is
CAUTION
8
this machine is installed in
damage
to floor
coverings
an area
or
with
a
property.
directly exposed to sunlight, wind, rain etc.
a properly installed standard power point
Plug the power cord of this washer into
that is switched & earthed.
Connectiong
inlet hose
The inlet hose is connected to tabs with 3/4" thread.
Ensure that rubber seals
12
Connect the cold inlet
hose
end
the blue
having
blue markings.
or
fitted.
are
Attach the
hose to
screw
it
a
straight
cold water
tightly
so
Straight
end of the cold
End
Rubber Seal
tap and then
that water will not
leak.
Water
Hose
Supply
Attach the elbow end of the cold
hose to the cold valve inlet with the
blue strainer and then
so
3
Connect the hot inlet
hose
end
having the red
or red markings.
screw
it
tightly
that water will not leak.
Attach the
hose to
screw
a
it
straight
so
Rubber Seal
Strainer
Inlet
Valve
Straight
end of the hot
hot water
tightly
Elbow End
End
Rubber Seal
tap and then
that water will not
leak.
Water
Hose
Supply
Attach the elbow end of the hot hose
to the hot valve inlet with the red
strainer and then
screw
it
tightly
Elbow End
so
that water will not leak.
Make
4 hose
sure
that the
It's the owner's
Rubber Seal
Inlet
Valve
responsibilty
to con-
nect the inlet hoses so that water
tight.
nuts are
Strainer
will not leak.
Connectiong tap adapter(Optional)
For
connecting the
optionally on some
1
inlet hose to
models.
Unscrew the
screws
Fix the
2 the tap.
taps without thread the tap adapter is provided
fixing
of the adapter.
tap adapter
to
Unscrew the 4 fixing screws of the tap
adapter so that the tap can be placed in
the middle. Push the connector vertically
upwards so that the rubber seal within
the adapter can completely adhere to the
tap.(Take care that the rubber seal will
not come off while pushing.
Place 2
wall and
fixing screws towards the
tighten it by hand or with
screwdriver to fit the size of the
diameter. Then
2
After
fixing
the tap
adapter
screws
tighten
to fit the
connect the inlet hose
Rubber Seal
Fixing
Screw
Tap Adapter
a
tap
the indicated
tap.
according
to the above instruction.
9
Installation
Improper installation of the washer may cause noise and malfunctioning.
1. The ventilating openings in the base area must not be obstructed by carpeting when the
washing machine is installed on a carpeted floor.
2. Install the washing machine on a level and firm surface, any tilt should be less than 1°.
How to
adjust level
1
Installation
Install the washer
4
on
Horizontal
area
flat and firm surface.
setting
Adjustable leg
Lift up the front of the washer and
the level indicator to the center by
adjustable legs
Horizontal
Location of
(Example)
move
plate,
10
or
setting
Cause
drop
To
clockwise
adjust the drop of
turning the
using the adjusting plate.
How to
adjust
When the front is lower.
Adjust the front adjusting plate
or adjust the adjustable legs.
with the
adjustable legs(2),
When the
Adjust the rear adjusting plate
or adjust the supporting plate.
with the
adjustable legs(2),
rear
is lower.
When the left is lower
Adjust the left part of
the supporting plate.
When the
Adjust the right part of
the supporting plate.
the
drop
and turn the
right
is lower.
of the level indicator
adjustable legs
by
15
2-3 times.
mm:
Use two
the front and
the front and
adjusting plates
adjusting plates
rear
rear
and
a
or
adjusting plates
10
mm
or
supporting
Checking
level
23 Checking slope
Open
the
lid, and check it the washer is correctly
by looking down from the top.
Adjust the drop of the level indicator to
Check if installation surface is tilted.
leveled
5 Confirming
(Try to shake
ly installed.)
the red circle.
level
the washer and check if the washer is firm-
Distance between drain hose and
the wall
More than 10cm
More than 2cm
More than 2cm
Place the washer to
Distance between drain hose and the wall should be
level
than 10cm, and the distance between the other
the wall should be more than 2 cm.
as
in the
firm the
level.)
original position and confirm the
figure. (Try to shake the washer and con-
more
part and
Check the location of the level in the front of washer.
How to
Use the
use
the
adjusting plates
adjusting plates
to level the washer when the
adjustable legs
cannot cover the gap.
11
Function of Each Button
Changing various functions is possible only in PAUSE state.
Selection button does not work when the washer is in operation
(Except
for water
level,
water
temp.).
Preparation before wash
Favourite select
Detergent deposit display
?
Upon loading laundry,
it displays the correct
amount of detergent to
be added according to
Pressing the
?
lows you to store
your favourite wash
conditions in the
the amount of laun-
NORMAL
dry(based on concendetergent).
trated
Check if
laundry
is washable in
Be
sure
to remove
keys, pins
laundry.
water.
as
things
FA-
VOURITE button al-
cycle
memory and than
recall it for use at a
later time.
such
and coins from the
SOAK
STAIN
LEVEL
LIGHT
HEAVY
WATER
LEVEL
SM
LX L
COLD
FAVOURITE
Wash
oily or dyed laundry
arately.
sep-
Brush off dust and soil from
?
?
fluffy laundry by turning
it inside out.
Wash delicate
ping
them in
a
clothes, wrap-
nylon
net.
Used to select proper watemperature of wash-
Child Lock
?
Used to lock
or
unlock the
ter
control buttons to
ing water, [COLD
WARM(HOT+COLD)
HOT] mode repeats.
all the
Use it to select hot
or
?
cold
(When hot water
only is selected, hot water
is suppled for washing
water.
and cold water
plied
12
WATER
TEMP.
clothes.
How to select temp.
Wash
HOT
for
are
rinsing)
sup-
prevent
setting from being
changed by a child.
For locking, push both
buttons simultaneously
and for unlocking, push
them
ing
one more
process.
in wash-
Stain lebel select
?
By pressing
[HEAVY ▶
?
button
displayed.
supply : IE lamp blinks.
Abnormal drainage : OE lamp blinks.
Abnormal spin : UE lamp blinks.
Abnormal water level sensing : PE lamp blinks.
Abnormal lid open : DE lamp blinks.
Abnormal over flooding sensing : OF lamp blinks.
re-
Available
during
washing.
Except for
WOOL
and DELICATE
program.
Power switch
a
washing program
?
are
Abnormal water
peats.
?
Used to indicate the time left of all processes or reservation.
In case of abnormal operation, the following indications
LIGHT ▶MEDIUM... mode
How to select
Display
Default is MEDIUM.
?
Use it to select
Use it turn
?
By pressing the button,
cycles [NORMAL
and turn
By pressing the
button [turn on turn off]
are repeated.
'
programs.
?
on
off.
washing
it
SPEEDY JEAN
Electric power automatically turns off 10 sec-
DELICATE WOOL
onds after the
NORMAL].
cycle
?
"
washing
finishes with "boo-
sound.
NO INLET
DOOR OPEN
DELICATE
WASH
MIN
RINSE
AUTO OFF
WOOL
DELAY / TIME LEFT
PROGRAM
NORMAL
TIME
START
PAUSE
How to
SPEEDY
SPIN
DELAY
MIN
adjust
wash conditions
?Wash:
JEAN
NO DRAIN
Use it to change washing time.
By pressing the button[18min
5min
SOAK 10min
SOAK 18min
OFF
SOAK
SOAK 15min
5min
10min
15min]
How to
How to
?
adjust
the water level
By pressing the button, it cycles
[LARGE LARGE EX-LARGE
?
EX-LARGE
SMALL
?
MEDIUM
?
?
SMALL
MEDIUM
?
SOAK is used to
delayed washing
dirt
LARGE].
or
SOAK pro-
automatically
based on the amount of laundry.
Water level can be adjusted ever
when the washer is in operation.
more
remove
old
or
Use this function for
Soak time is about 60 minutes.
?
Use it to set the
not
delayed washing.
delay time.
?Bypressingthebutton,itcycles[3 4 5
... 11 12 14 16 ... 46 48 3]
hours. (up to 48 hours can be delayed)
To cancel delay time, turn the power switch off.
?
Start and temporary pause
?
?
?
Use it to start
Pressing the
or pause temporarily.
button repeats start and
pause.
After 10 minutes in
power will
a
temporary
temporary pause state, the
automatically turn
off.
?
change
Rinse
hardened
effectively.
?
MEDIUM
LARGE
At NORMAL, JEAN
gram, water level is
use
in WOOL
(You
can-
program.)
:
Use it to
change the frequency of rinse.
By pressing the button.
[rinse1 rinse2 rinse3 rinse4
OFF
rinse 1] are repeated.
When you select rinse only, the operation
starts with water supply.
?Spin:
Use it to change the spinning time.
By pressing the button [5 min 7 min
OFF 1min 3min 5min].
13
Normal and Jean Wash
Use this program for
washing
Program
normal wash load.
SOAK
STAIN
WASH
LEVEL
LIGHT
HEAVY
MIN
WATER
LEVEL
SM
In
RINSE
TIME
LX L
FAVOU-
COLD
RITE
HOT
WATER
TEMP.
SPIN
MIN
NORMAL, JEAN and SOAK programs.......
The washer
senses
the amount and kinds of
laundry
and sets the most
appropriate
water
current, wash
time, number of rinses and spin time by itself.
While
sensing
the most
appropriate
water
level, each
If either the inner-tub contains water
become
Bulky
higher. Manually adjust
and
light laundry
may
or
water level
the
laundry
is wet before
proper water level before
cause a
blinks in turn.
lamp
loading, water levels may
operating the washer in this case.
water level lower than usual. In this case,
manually adjust
the water level.
For
laundry
Water
that may
easily
be
discolored, do
supply may be resumed about
adjustment function.
not use
2 minutes after
[SOAK] washing.
starting
the wash. It is
an
automatic
water level
When
on
14
the
using neutral detergent or liquid detergent, deposit
[instruction for detergent].
proper amount of
detergent
based
NO INLET
DOOR OPEN
DELICATE
DELAY / TIME LEFT
AUTO OFF
WOOL
START
PROGRAM
PAUSE
SPEEDY
DELAY
AN
NO DRAIN
2
1
1
Press the
2
Deposit laundry
3
[POWER]
button.
and
push [START/PAUSE]
button.
Deposit detergent as indicated on the display or according
instruction of detergent manufacturer and close the lid.
Electric power
"boo--" sound.
automatically
turns off 10 seconds after the
If the lid is not
closed, the machine
cannot start
washing
washing cycle
and it
to
finishes with
displays "DE"
with
alarm sound.
15
Speedy Wash Program
Use this program for
washing slightly
soiled
laundry.
SOAK
STAIN
WASH
LEVEL
LIGHT
HEAVY
MIN
WATER
LEVEL
SM
FAVOU-
COLD
RITE
HOT
RINSE
TIME
LX L
WATER
TEMP.
SPIN
MIN
This program is economical because of its short
Adjust water quantity according
Preset water level is medium.
16
to the amount of
washing
time.
laundry.(less
then
3.0kg)
NO INLET
DOOR OPEN
DELICATE
DELAY / TIME LEFT
AUTO OFF
WOOL
START
PROGRAM
NORMAL
PAUSE
D
S
DELAY
JEAN
NO DRAIN
2
4
1
Press the
2
Select
3
Deposit laundry.
4
Press
5
[POWER]
1
button.
[SPEEDY] program by pressing
[STAR/PAUSE]
the program button.
button.
Deposit detergent as indicated on the display or according
instruction of detergent manufacturer and close the lid.
If the lid is not
closed, the machine
cannot start
washing
and it
displays "DE"
to
with
alarm sound.
17
Wool and Delicate Wash
Use this program for
Program
woolens.
washing wool, shumack,
SOAK
STAIN
WASH
LEVEL
LIGHT
HEAVY
MIN
WATER
LEVEL
SM
FAVOU-
COLD
RITE
How to
Spread
dry
RINSE
TIME
LX L
WATER
TEMP.
HOT
SPIN
MIN
wool clothes
wool and Wool clothes
on a
shady,
flat
sur-
face.
In case of using a clothes hanger, wrap the upper
portion of the hanger with a towel to maintain the
shape of the neck or shoulder section.
Weak wrinkles after
drying
can
be smoothed out
by ironing.
CAUTION
When
may
setting the water
get damaged.
Only
cold water is
level
Do not wash
can
be
Since
18
easily
spin
or
SMALL water levels.
Laundry
liquid detergents for woolens or home dry cleaning that are low
in case of powdered detergent it should be dissolved in water
readily
best washing results.
use
of
and dissolve
Wash less than
do not select MEDIUM
set(Hot water may damage laundry).
It is recommended the
sudsing
before being put
manually,
for
2.0kg
or
of
laundry
altogether with
at a time. For
white
Wool, wash less than 1.0kg of laundry
clothes, bright-colored clothes
or
dark-colored clothes which
discolored.
is 'weak' for Wool program, water may
drop
even
after
at a time.
spinning.
NO INLET
DOOR OPEN
DELAY / TIME LEFT
AUTO OFF
W
START
PROGRAM
NORMAL
PAUSE
SPEEDY
DELAY
JEAN
NO DRAIN
2
3
1
1
Press the
2
Select
3
Deposit laundry
4
[WOOL
Water level is
For
[POWER]
laundry
or
DELICATE] program.
automatically
with
set
[LARGE].
and press the
fragile buttons, etc.,
Deposit detergent
If the lid is not
button.
[START/PAUSE]
button.
turn them inside out.
and close the lid.
closed, the machine
cannot start
washing
and it
displays "DE"
with alarm
sound.
19
DELAY START
This
Washing Program
conveniently for the every washing type.(except for WOOL and DELICATE program.)
to cancel delay start for delayed washing, switch the power off and start again.
be used
can
When you want
SOAK
STAIN
LEVEL
LIGHT
WASH
HEAVY
MIN
WATER
LEVEL
SM
RINSE
TIME
LX L
COLD
FAVOURITE
HOT
WATER
TEMP.
SPIN
MIN
How to set the
Example
:
It's 7
set the time as in the
When you
12
14
If
a.m. now.
push
figure
48
For
detergent
DELAY/TIME LEFT
below.
the button the
16...
Pull the box and
Time
like your wash to finish at 9 p.m.
you'd
delay time changes [3
3] repeatedly.
How to put the
Put the
Delay
4
14hours:7a.m.
5...
detergent into the detergent box
For
powder detergent
into the exclusive
the
put
again.
~9p.m.
detergent
detergent
box.
then close the box
Put the
detergent
liquid detergent
after
diluting
it with the water at
the rate of 1:1.
2
Put the
bleaching
agent here
3
1
Dry the moisture in and out of the box before inserting
detergent (the detergent can become hard).
the
CAUTION
Make
sure
to
deposit detergent
in the
powder detergent
box.
If you leave detergent with the laundry for a long time, the
When the lid is opened, delayed washing cannot proceed.
In
of power
failure,
from the
may get
partially
discolored.
beginning.
supply conditions, washing may be unable to be completed by the preset time.
Remove any water from the powder detergent box before depositing detergent.
Moisture may harden the detergent.
After setting delay time, you can change the program, wash time, number of rinses, spin time,
case
According
water
20
set
again
laundry
to water
temperature and
water level.
NO INLET
DOOR OPEN
DELICATE
DELAY / TIME LEFT
E
AUTO OFF
WOOL
START
PAUSE
PROGRAM
NORMAL
SPEEDY
DELAY
JEAN
NO DRAIN
2
3
4
1
1
Press the
2
Select
3
Set the Time.
4
Deposit laundry
and press the
Deposit detergent
in the
5
a
[POWER]
button.
program.
Select program
except for [WOOL and DELICATE] program.
Press the DELAY START button to set the time when the
delayed washing
[START/PAUSE]
powder detergent
is
completed.
button.
box and must close the lid.
Pull the powder detergent box forward and deposit proper amount of detergent displayed
according to instruction of detergent manufacturer. Then, push back the box.
If the lid is not
closed, the machine
cannot start
washing
and it
displays "DE"
or
with
alarm sound.
How to wash when you go out
When you cannot take the laundry out
select wash and rinse
only (in
immediately
after
this case, do not select
washing is completed, you'd
spin to prevent wrinkle).
better
21
SOAK Wash
Use this program for
Program
washing heavily
soiled
laundry
after
soaking.
SOAK
STAIN
WASH
LEVEL
LIGHT
HEAVY
MIN
WATER
LEVEL
SM
RINSE
TIME
LX L
FAVOU-
COLD
RITE
HOT
WATER
TEMP.
SPIN
MIN
3
3
CAUTION
If either the inner-tub contains water
or the laundry is wet, water level may be different from the inilevel.(It is not malfunction. It is the proper water setting for laundry.)
Bulky and light laundry may cause a water level lower than usual. In this case, manually adjust the
tial set
water level.
For
22
laundry
that may
easily
be
discolored, do
not use
[SOAK] washing.
NO INLET
DOOR OPEN
DELICATE
DELAY / TIME LEFT
AUTO OFF
WOOL
START
PROGRAM
NORMAL
PAUSE
SPEEDY
DELAY
JEAN
NO DRAIN
2
41
1
Press the
2
Select
3
Press the
a
[POWER]
program.
WOOL and DELICATE
Soak
washing
[WASH]
washing
18M
button.
is not available for
soaking washing.
button until soak and wash blink.
time order
5M
10M
15M
18M
5M
10M
15M
WASH
Select rinse times and
4
5
spin
Deposit laundry
time.
and press
[START/PAUSE]
button.
Deposit detergent as indicated on the display or according
instruction of detergent manufacturer and close the lid.
If the lid is not
closed, the machine
cannot start
washing
and it
displays "DE"
to
with alarm
sound.
23
Favourite Wash
Program
SOAK
STAIN
WASH
LEVEL
LIGHT
HEAVY
MIN
WATER
LEVEL
SM
FAVOU-
COLD
RITE
HOT
To recall your favourite
Press power
Select the favourite
cycle by pressing the PROGRAM.
button(FAVOURITE cycle setting)
Push the FAVOURITE
Press the START/PAUSE button.
Then the wash
24
cycle.
on.
cycle
starts.
RINSE
TIME
LX L
WATER
TEMP.
SPIN
MIN
NO INLET
DOOR OPEN
DELICATE
AUTO OFF
WOOL
DELAY / TIME LEFT
START
PROGRAM
NORMAL
PAUSE
SPEEDY
DELAY
JEAN
NO DRAIN
4
1
1
Press the
2
Select
3
Select your favourite wash conditions.
?
?
?
?
?
4
5
[POWER]
button.
[FAVOURITE] program by pressing
the program button.
Press the WATER TEMP. button to select wash water temperature.
Press the WATER LEVEL button to select water level.
Press the STAIN LEVEL to select HEAVY
or
LIGHT wash
option.
Press the WASH button, the RINSE button & the SPIN button to select wash time, rinse
times & spin time respectively you want to store.
Push the FAVOURITE
Press
button(FAVOURITE cycle setting)
[STAR/PAUSE]
button.
Deposit detergent as indicated on the display or according
instruction of detergent manufacturer and close the lid.
If the lid is not
closed, the machine
cannot start
washing
and it
displays "DE"
to
with
alarm sound.
25
Selectable
Methods
Washing
SOAK
STAIN
WASH
LEVEL
LIGHT
HEAVY
MIN
WATER
LEVEL
SM
RINSE
TIME
LX L
FAVOU-
COLD
RITE
HOT
WATER
TEMP.
SPIN
MIN
1
1
WASH
?
RINSE & SPIN
Only
Push the wash button to
?
select wash time.
?
In this
case
selected wash
Adjust water
spin
?
level for
Preset water level is
Push the rinse & the
spin
DRAIN
but-
Push the
?
spin
Only
button.
ton to select rinse times &
time is lit up.
?
Only
laundry.
"Large"
time
In this
respectively.
case
?
selected rinse
Push the Start/Pause button
with the lid open.
time &
?
spin time are lit up.
Adjust water level for laundry
amount. Preset water level is
"Large"
Put
&
Push the
detergent
232
start/pause
close the lid.
button.
?
When
washing
finishs
buzzer sound for 10
secs
and then electric power is
automatically off.
26
Push the power
switch to turn off
after drain finishes.
?
Buzzert sounds when
drain fininshs in the state
that the lid is open.
NO INLET
DOOR OPEN
DELICATE
AUTO OFF
WOOL
DELAY / TIME LEFT
START
PROGRAM
NORMAL
PAUSE
SPEEDY
DELAY
JEAN
NO DRAIN
3
1
Wash & Rinse
?
Rinse
Only
Press the WASH button
?
to select the time.
?
?
Press the RINSE button
to select the number of
Press the RINSE button to
select the number of rinses.
?
Only
Adjust the water level
according to the amount
of laundry.
Press the SPIN button
?
to select the time.
?
Press the WASH and
SPIN button to select
?
?
If the water level is not
selected, it is automati-
cally
set to
Spin Only
wash and
Adjust the water level
according to the amount
of laundry.
selected, it is automati-
set to
?
rinses.
?
If the water level is not
cally
Wash &
Spin Only
spin time.
Adjust water level for
laundry.
Put laundry and detergent.
[LARGE].
[LARGE].
Close
23
the lid
Press the
[START/ PAUSE]
button
Ifthelidisnotcom-
pletely closed, the
washer generates the
alarm sound.
PROGRAM
START
PAUSA
Electric power turns off
automatically 10 seconds
after the alarm
when
sounds,
washing completely
finishes.
27
Water Level and Amount of
WATER
LEVEL
EX
AMOUNT OF DETERGENT
AMOUNT
OF WATER
AMOUNT
OF LAUNDRY
8.0kg
5.0kg
3.0kg
About
67g
About
57g
About
53g
Less than
46L
S
76g
Less than
53L
?
About
Less than
4.0kg
2.0kg
About
46g
About
34g
Less than
34L
1.0kg
About
61g
About
51g
About
45g
About
38g
About
35g
About
31g
About
23g
91g
Less than
57L
M
About
6.5kg
67L
?
CONCENTRATED
Less than
76L
L
REGULAR
More than
91L
?
Detergent
Concentrated
detergent: 20g per 30 liters of water.
Regular synthetic detergent: 30g per 30 liters of water.
When sensing water levels automatically, the amount of water
even
For
can
differ
according
to the amount of
laundry
at the same water level.
synthetic detergent,
use one
that
generates less bubbles. This type of detergent is specially designed
for washes.
In
using liquid detergent, dissolve it with water(detergent: water=1:1)
deposit hole.
detail usage, refer to the detergent manufacturer's instruction.
case
of
and
deposit
it
from
laundry
may remain
through
the
bleach
For
CAUTION
If you use laundry soap(neutral resin) for a long time, dirt
the inner-tub wall and cling to laundry during washing.
Using
28
excessive amount of
detergent
separated
may reduce the rinse effect and
pollute
on
the environment.
How to
How to
In the
the Bleach and the Softener
use
the bleach agent
use
of using the bleach, it is necessary to use the oxygenated bleach.
powdered bleaching agent after separating the clothes only for bleaching.
liquid bleaching agent with into the washing cask.
case
Put the
Put the
For detail usage, refer to the bleach
agent manufacturer's instruction.
Bleach inlet
How to
the softener agent
use
Pull and open the detergent box in the direction of arrow as indicated at picture.
Put the enough agent under the standard line as indicated at the picture.
Put the box
slowly
and
smoothly
not to make the
For detail usage, refer to the softener
Detergent
agent
agent flow
over.
manufacturer's instruction.
Softener cap
inlet
Limited line
If the softener is
it
can
flow
over
put,
over.
Softener inlet
Powder
detergent
box
CAUTION
The softener is to be inserted
Insert the softener
yourself
automatically
at the last time of rinse.
at the last time of rinse since softener can be failed to be inserted auto-
matically when
the water pressure is weak (less than 0.5kgf/cm2).
Do not leave the washing machine with the softener in it more than 2
softener
Do not
by
days. (It could fail to insert
solidating softener.)
clothes. (The clothes can be damaged of discol-
itself when left with softener because of the
put the bleach and softener directly
to the
of
ored.)
29
Basic of
Selecting
Each Button
In addition to full-automatic washing, the user can select other functions
washer is in operation, pause the washer before making changes.
Water
as
desired. When the
selection
supply
the button, it cycles COLD
HOT
COLD.
WARM(COL & HOT)
Even when only HOT or WARM is selected, water is supplied COLD only during the RINSE
By pressing
cold water is set in the WOOL
Only
cycle.
washing.
Water LEVEL selection
Water level is set
automatically
button to
the water level.
change
after
sensing
the amount of
laundry
is
high
or
low, press the WATER LEVEL
Stain Level selection
HEAVEY
Except for WOOL and DELICATE program.
detergent, the washer starts
operating at a level which is one step lower
Heavily-stained clothes
MEDIUM
Normally-stained clothes, cotton, yam, synthetic
LIGHT
To dissolve
fabric, thin clothes
Lightly-stained clothes
than the
preset water level.
Wash selection
SOAK
18 min.
Heavily
15 min.
Normal clothes, cotton, yam,
8
10
-
5 min.
5
stained clothes, thick clothes
synthetic fabric, normally-stained clothes,
Soft clothes, delicate clothes,
Actual wash time may differ according to water level.
For WOOL and DELICATE program, washing wings revolve very
lightly-stained
thin clothes
clothes
slowly(to prevent shrinkage
and
damage).
Rinse selection
Rinse 4
Heavily
Rinse 2, 3
Rinse 1
Spin
stained clothes
Normal clothes, cotton, yam,
Lightly-stained
synthetic fabric, normally-stained clothes,
thin clothes
clothes
selection
7min.
Thick clothes
5min.
Normal clothes,
3min.
Soft clothes
1min. at low revolution
For WOOL and DELICATE
light clothes,
program, the tub turns very slowly
and spins for a very short time
thin clothes
(to prevent damage
Clothes to be ironed, delicate clothes
speed
to
clothes).
Child Lock Selection
To
guard against
unwanted alteration of
cycle settings during operation
the child lock may be utilised.
HOW TO LOCK
1
Press the POWER
2
button
Press the START/PAUSE
after all washing conditions are set according to
the manual.
key
Preset all
3
Press both the RINSE. key and the SPIN key
simultaneously while wash is proceeding,
then all the keys are locked until completing
the wash program or unlocking them.
washing
conditions.
PROGRAM
START
PAUSA
HOW TO UNLOCK
If you want to unlock
30
during
wash press both the water
"CJ"
& the
shown
on
temp key and the
remaining time are altematively
diplay while they are locked.
the
water level
key simultaneously again
the Washer
Maintaining
supply is bad, check substances
is clogged with dirt, water cannot flow
sand in the filter.
When the water
like stone
If the filter
into the washer. Clean the filter
cleaning
regularly.
the filter in the inlet valve
Cleaning
Before
or
the filter in the inlet valve,
completely
remove
the water
remaining
in the water hose.
Turn off the faucet and press
the power switch.
Disconnect water
hose, and
the inlet valve
hand
Select cold & hot water and
Remove dirt with
13
by
a
tooth
remove
filter from
with tools.
or
brush,
etc.
press START/PAUSE
button. Let the washer
operate for
2Switch
5 seconds.
off the washer and
disconnect the power cord.
Then insert it back into the water inlet.
Cleaning
the lint filter
Press and then
pull
forward
Turn inside out and wash it to
123
the lint filter from the
tub to the
arrow
remove
dirt.
Insert it back into
place
("Click").
direction.
When the lint filter is
Pump
washing
worn
out, etc., contact
a
LG Service Center for
new one.
Model
Cleaning
Unfasten 2
the pump
screws
of the back
casing
(when drainge is bad)
turn the cap to the arrow
123
direction and unfasten it.
cover.
Reassemble the cap to the
direction and fasten it.
arrow
(Bottom view)
(Bottom view)
CAUTION
:
Check it
over
if water leaks after
reassembling.(Rubber ring
is in the
cap)
31
the Washer
Maintaining
To prevent freeze in winter
Close faucet and
remove
the
Press the SPIN button and let it
123
water hose. Direct the hose
spin
toward the bottom and
from the tub and drain hose.
completely
for 1 min. to
remove
Unplug
the power cord.
water
water from the hose.
remove
(Pump)
(Pump)
(Non-pump)
(Non-pump)
(Pump)
(Non-pump)
When frozen
Pour 50°C of hot water
on
the
Pour 50°C of hot water inside
Submerge
the tub and leave it for 10 min.
in 50°C of hot water
123
faucet and
remove
the water
hose.
Connect the water hose to
Connect the water hose
the washer and then start
to the faucet and
the washer. Pour 50°C of
check if water
hot water into the water
is
45
draining.
hose.
CAUTION
Stainless steel inner tub won't be rusted.
rust may cling to it in the following causes:
product(like hairpin,etc,) that can be rusted is left inside the
However, external
Metal
long
time.
Water with
Water
or
a
lot of iron substance is used for
chlorine
a
long
time.
type bleach is left inside the tub for
a
long
time.
If rust is found, soak sponge or soft cloth with cleaner
(neutral cleaner) and wipe the rust.(Never use metal sponge)
32
tub for
a
the
separated
hose
Troubleshooting
If
a
Guide
symbol appears in the display window, check the following before asking for service.
for the service center or agent in the case of failure or damage except for the following.
abnormal
Request
SYMPTOM
ITEM TO BE CHECKED
Abnormal faucet
Is the faucet
Is the faucet frozen?
closed?
Is water
supply
Is the water preslowered or
cold water hose is connected to
the filter
the cold
sure
discontinued?
clogged?
Is hot water selected when
cold
Abnormal
only a
valve?(In this case,
water.)
select
drainage
(Pump Model)
Abnormal
Check if electric
Check that the drain
Is the drain hose
Check whether the
power
has gone off.
hose is not twisted
hung properly?
drain pump is locked
or
kinked?
by foreign objects.
drainage
(Non-Pump Model)
Is the drain hose lowered?
Abnormal
Is the drain hose frozen?
spin
Is the
Opened
Is the drain hose bent?
Is the doorsill too high?
laundry gathered
to one side?
Is the washer tilted?
lid
(At this time, buzzer sounds
without lamp indication)
Is the lid closed? If the lid is open, alarm
generated and rinse and spin cannot
is
be
proceeded.
Is the lid closed after
setting delayed
washing? If the lid is opened, delayed
washing cannot be proceeded.
33
Troubleshooting
Guide
SYMPTOM
Abnormal
ITEM TO BE CHECKED
sensor
Abnormal power
Ask for service center
Abnormal overflood
Abnormal Ball
sensor
No power
Is the power switch
Is the power plug
firmly connected?
pressed?
Is power supply correct?
Is the short-circuit breaker
No
closed?
operation
PROGRAM
START
PAUSA
Is the lid closed and the
Is the tub filled with
START/PAUSE button
required
is
Is the faucet closed?
amount of water?
pressed?
Excessive vibration and
noise during spin
Is the washer installed
Water
supply and rinse after
pausing it during spining.
34
on
firm and level surface?
It is
normal, the washer is automatically correcting the laundry gathered
No
special
action is needed.
to one side.
Specifications
H
D
W
Model
Size
:
:
WF-T1081TP(H) / WF-T1181TP(H)
632(W)
Water pressure
Revolution
688(D)
:
1029(H)mm / 632(W)
30 800kPa
speed
-
of the
688(D)
1059(H)mm
(0.3kgf/cm2 8kgf/cm2)
-
wings : 110~130rpm
Weight : 47kg
Standard amount of water
:
91L
Standard amount of water used
The appearance and
specifications
:
260L
may be varied without notice to raise the units
quality.
35
P/No.: 3828EA3012A
Download PDF

advertising