LG WD-12362TD Owner's manual

P/No.: 3828ER3036D
Washing
Machine
OWNER'S MANUAL
WD-1236(0~9)SD
WD-1036(0~9)SD
WD-1236(0~9)ND
WD-1036(0~9)ND
WD-1236(0~9)TD
WD-1036(0~9)TD
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Features
Protection
against
creases
With the alternate rotation of the drum,
creasing
in the
laundry
is
minimized.
More economical
Intelligent
Wash
by Intelligent Wash System
System
detects the amount of load and water
temperature, and then determines the optimum
washing
time to minimize energy and water
water level and
consumption.
Child-Lock
The child-lock system is to be used for preventing children from
pressing any button to change the program during operation.
Low noise
speed control system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
evenly
distributes
Auto Restart
Auto Restart allows the program to restart all
power failure. It does from the stage where it
Direct Drive
by itself in
stopped.
System
The advanced Brushless DC motor rotates the drum
without belt and
C
case
directly
pulley.
ontents
Warnings....................................................................................3
Specifications.............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
of
W
arnings
READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
Before installation, check exterior
do not install.
?
Do not install
be
?
?
?
?
?
?
has,
using
dry articles that have been cleaned
in, washed in, soaked in, or spotted with
combustible or explosive substances (such as wax,
oil, paint, gasoline, degreasers, dry-cleaning
solvents, kerosene, etc.) which may ignite or
explode.
?
Do not slam the washer door closed
to the weather.
understand and have the skills to carry out.
Keep the area underneath and around your
free of combustible materials such
as
Do not wash
or
or
try to force
the door open when locked. This could result in
damage to the washer.
?
?
etc.
Close supervision is necessary if this appliance is
used by or near children. Do not allow children to
play on, with, or inside this or any other appliance.
Keep small animals away from the appliance.
Do not leave the washer door open.
An open door could entice children to hang on the
door or crawl inside the washer.
Never reach into washer while it is moving. Wait
until the drum has completely stopped.
The laundry process can reduce the flame retardant
of fabrics.
To avoid such a result, carefully follow the garment
manufacturer's wash and care instructions.
When the machine
runs
high temperature, the front
door may be very hot. Don't touch it.
To minimize the possibility of electric shock, unplug
this appliance from the power supply or disconnect
the washer at the household distribution
?
?
?
panel by
removing the fuse or switching off the circuit breaker
before attempting any maintenance or cleaning.
When unplugging power cord, do not pull out by
grasping the cord. Otherwise, the power cord may
be damaged.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially disassembled, or
has missing or broken parts, including a damaged
cord or plug.
Before discarding an old machine unplug it. Render
the plug useless. Cut off the cable directly behind
the appliance to prevent misuse.
Do not
This
to persons when
?
store the washer where it will
lint, paper, rags, chemicals,
?
If it
published user-repair instructions that you
appliances
?
damages.
Do not tamper with controls.
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recommended in the user-maintenance instructions
or
?
exposed
injury
precautions, including the following:
?
or
or
push down the door excessively,
could topple over the washer.
when washer door open.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
appliance must be grounded.
In the event of malfunction
or
breakdown, grounding will reduce the risk of electric shock by providing a path
appliance is equipped with a cord having an equipment-grounding conductor and grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
of least resistance for electric current. This
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper connection
of the equipment-grounding conductor can result in risk of electric shock. Check with
a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify
the plug provided with the appliance if it does not fit the outlet, have a proper outlet installed by a qualified electrician.
-
3
S
pecifications
Bio
CottonC
Time Left
600
400
1000
Eco
Intensive
R nse+
i
Pre
RinseHold
Dli
800
Wash
1400
t
Crease
No
Power
Care
Spin
Spin rpm
rt Pause
WD-1236(0~9)SD
WD-1036(0~9)SD
Front
Name
Power
Weight / Max.
loading washing
WD-1236(0~9)TD
WD-1036(0~9)TD
machine
220-240V~ 50Hz
supply
Size
Wash
WD-1236(0~9)ND
WD-1036(0~9)ND
,
600mm(W)x360mm(D)x850mm(H) 600mm(W)x440mm(D)x850mm(H) 600mm(W)x550mm(D)x850mm(H)
Watt
56kg
capacity
/ 2000W
3.5
Water
kg
42
consumption
Permissible water
0.3
Pressure
Spin Speed
The appearance and
59kg
No
No
Spin/No
Spin/No
-
64kg
5kg
7kg
60
56
Drain/400/600/800/1000/1200
[WD-1036(0~9)SD/1036(0~9)ND/1036(0~9)TD]
[WD-1236(0~9)SD/1236(0~9)ND/1236(0~9)TD]
may be varied without notice to raise the units
Accessories
Spanner
4
/ 2100W
10kgf/cm2 (30~1000kPa)
Drain/400/600/800/900/1000
specifications
/ 2000W
quality.
nstallation
I
temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
Install
or
carpeted
store where it will not be
exposed
to
floor.
In countries where there
which may be subject to infestation by cockroaches or other vermin,
attention to keeping the appliance and its surroundings in clean condition at all times.
particular
Any damage which
pay
are areas
may be
cause
by
cockroaches
or
other vermin will not be covered
by
the
appliance
guarantee.
Transit bolts
The
?
appliance is fitted
with transit bolts to
prevent internal damage during transport.
and all transit bolts must
Packing
be removed before
using
the
washer.
Washer
When
sure
the base, be
the additional
unpacking
to
remove
packing support in the
of the base packing.
Removing
middle
Packing Support
Base
Packing
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are
locked. Before operating the washer,
3. Take out the 4 bolts
along with the
rubber bungs by slightly twisting the
bung. Keep the 4 bolts and the
spanner for future
remove
the bolts
?
If
they
heavy
along
with the rubber
bungs.
removed, it may cause
vibration, noise and malfunction.
are
not
2. Unscrew the 4 bolts with
the spanner
use.
?
Whenever the
appliance is transported,
the transit bolts must be refitted.
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
Installation place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 1˚
:
Must be within 1.5 meters of either side of
location of washer. Do not overload the outlet
with
Laundry
Tub
more
than
one
appliance.
Additional Clearance
approx.
2cm
:
For wall, door and floor
(10cm
: rear
Do not
place
modeling is required.
/2cm:right & left side)
or
store
laundry products
washer at any times.
They can damage the finish
or
top of
on
controls.
650
850
600
Positioning
Install the washer
Make
?
?
?
?
sure
flat hard floor.
that air circulation around the washer is not
Never try to correct any unevenness in the floor with
materials under the washer.
If it is
impeded by carpets,rug
The washer must not be installed in
Please
ensure
a
adjust
all four feet
6
appliance
easily
the side
or
similar
burning
facing
the cooker
drop
below 0°C.
can
accessible for the
engineer
or
in
the transit bolt spanner provided
clearance of approximately 20mm is left between
using
is stable, and a
the top of the washer and the underside of the
ensuring
on
where the temperature
that when the washer is installed, it is
breakdown.
With the washer installed
the
rooms
to a gas cooker or coal
foil
etc.
of wood, cardboard
pieces
impossible to avoid positioning the washer next
stove,an insulating(85x60cm) covered with aluminum
stove,must be inserted between the two appliance.
the event of
?
on a
work-top.
nstallation
I
Electrical connection
1. Do not
use an
extension cord
or
double
adapter.
be replaced by the manufacturer
2. If the
3.
supply cord is damaged, it must
qualified person in order to avoid a hazard.
Always unplug the machine and turn off the
4. Connect the machine to
5. The
?
?
?
appliance
must be
water
supply after
positioned
so
that the
plug
is
easily
its service
agents
or
similarly
use.
earthed socket in accordance with current
an
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may
burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing
point.
If the appliance is delivered in the winter months and temperatures are below freezing : Place the washing
machine at room temperature for a few hours before putting it into operation.
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing Machine
is to be connected to the water mains
using
new
hose-sets and that old
hose-sets should not be used.
Connecting
water
supply hose
▶Water
supply pressure must be between 30kPa
and 1000kPa (0.3~10kgf/cm2)
▶Don't strip or crossthread when connecting
Inlet hose
to
the valve.
▶If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied
with the water
inlet hoses.
are
used for
preventing
They
water leaks.
?
?
Hose connector
?
Rubber seal
Make
sure
the connection to taps is
tight
enough.
Periodically check the condition of the hose
and replace the hose if necessary.
Make
sure
that there is
no
kink
on
the hose
and that it is not crushed.
7
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
3. Push the
connector up till the
packing is
supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing
screw
packing
one
touch type inlet hose
2. Push the upper connector up
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
Middle
Rubber
connector
till
water
(Single
3. Connect the
water
inlet
models)
supply hose
to the middle connector,
pushing the plate down.
Upper
Connector
packing
Plate
Upper
?
In
the diameter of the tap is
remove the guide plate.
Connector
case
large
Guide
Water
Middle
hose
connector
plate
Turn the middle connector not
?
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
kinks in the hose and that it is
not crushed.
Square tap
8
are no
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
if the machine is to be left for any length of time
if there is no floor drain(gully) in the immediate vicinity.
Turn off the
stopcock
especially
When disposing
of the
appliance,
cut off the mains
(e.g. holiday),
cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is
a
risk
of suffocation !
Keep
all
packaging
well away from children
Installation of drain hose
?
?
?
?
?
The drain hose should not be
When
installing the drain hose sink,
secure it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
nstallation
I
Level
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
corner
appliance
of the
solid and level floor surface,
suspended type flooring
or
excessive vibration and unblance
insert
adjust the adjustable
pieces of wood etc. under the feet)
Make
sure
that all four feet
are
then check that the
NOTE
a
appliance
washer is level, tighten
may contribute to
feet
as
required. (do
In the
is
resting on the floor and
perfectly level. (use a spirit level)
of the
washing machine is installed
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
case
not
stable and
the lock nuts up towards
the washer. All lock nuts must be tightened.
After the
in
errors.
2. If the floor is uneven,
※
preferably
room.
Timber
NOTE
on a
that the
base
on a
of
raised
Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the machine
should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Concrete floors
?
The installation surface
?
Install washer
Tile floors
on a
clean, dry and level.
flat hard floor.
on
sections and stick the
Tread Mate is
※
be
(Slippery floors)
Position each foot
?
must
a
the Tread Mate and level the machine
pieces
on
to
the
to suit.
dry tile where machine is
to
(Cut Tread
be
Mate into 70x70
placed.)
self adhesive material used on ladders & steps that prevents
slipping.
Wooden floors
?
?
(Suspended floors)
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups
at
?
If
least 15mm thick under the
possible
install the washer in
washer, secured
one
of the
corners
※
Insert the rubber cups to reduce vibration.
※
You
can
obtain the rubber cups
to at
Rubber
under each
foot,
least 2 floor beams with
of the
room,
screws.
where the floor is
(p/no.4620ER4002B) from
Cup
more
the LG spares
stable.
dept.
Important!
Proper placement and levelling of the washer ensure long,regular and reliable operation.
The washer must be absolutely horizontal and stand firmly in position.
?
?
?
?
?
under load.
The installation surface must be clean, free from floor wax and other lubricant coatings.
Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
It must not "Seesaw"
10
across corners
mm
C
are
before
Before the first
Select
washing
washing
cycle (COTTON 60°C, add
without clothing.
a
This will
remove
a
half load of
detergent)
allow the unit to wash
residues from the drum that may have been left
during manufacturing.
Caring before washing
1. Care Labels
Look for
garment
2.
your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
label
on
Sorting
get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer can occur causing discoloration of white etc. If possible, do not wash heavily
To
soiled items with
lightly soiled
Soil
one.
(Heavy, Normal, Light)
Color (White, Lights, Darks)
Lint (Lint producers, Collectors)
3.
Caring
before
Separate
Separate
clothes
according
to amount of soil.
white fabrics from colored fabrics.
Wash lint
lint collectors
producers and
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets
to make sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers, hooks and strings
make
sure
snag
?
on
that these items don't
other clothes.
Pretreat dirt and stains
a
little
to
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help shift dirt.
11
dding
detergent
A
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
?
max
The
detergent should be used according to the
instruction of the detergent manufactrurers.
If too much detergent
reduce the
Use powder
motor.
detergent only for the front
washer.
Detergent usage may need to be
adjusted for water temperature, water
?
?PreWash+MainWash
2.
washing
If suds occur too much, pleas
detergent amount.
or cause
loading
only
many suds
the
?
Main wash
too
heavy load to
(Causing malfunctions)
result
?
is used,
and this will decrease the
can occur
?
dosage
hardness, size and soil level of the load.
For best results, avoid oversudsing.
Adding Fabric Softener
4. Water softener
A water
?
softener, such
used to cut down
?
of the fabric softener which could stain
extremely hard water areas. Dispense
according to the amount specified on the
packaging. First add detergent and then
clothes.
the water softener.
can cause
early dispensing
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
?
?
?
the
in
Do not exceed the maximum fill line.
Overfilling
?
on
Calgon can be
use of detergent
as
2
Use
?
days.
a
quantity of detergent
as
for soft
water.
Softener will
automatically be added
during the last rinse cycle.
Tips
?
Full load
according
:
to
Do not open the drawer when water is
manufacturer's
supplied.
recommendation.
Solvents(benzene, etc)
are
not
allowable.
NOTE
12
Do not pour fabric softener
directly on the clothes
?
3/4 of the normal amount.
?
Part load
?
Minimum load
:
:
1/2 of full load.
Detergent is flushed from the dispenser
at the beginning of the cycle.
F
unction
Recommended
Program
courses
Fabric
according
Proper
Temp.
Type
First check if
laundry
to the
laundry type
Maximum Load
Option
WD-1236(0~9)SD WD-1236(0~9)ND WD-1236(0~9)TD
WD-1036(0~9)SD WD-1036(0~9)ND WD-1036(0~9)TD
is
machine washable.
95˚C
(white cotton, linen
towel and sheets...)
Medic Care Rinse
Cotton
Intensive
Color fast gaments
(shirts, night dresses,
pajamas...)and lightly
soiled white
60˚C
Rating
Rating
Rating
Less than
Less than
Less than
Rinse+
Pre Wash
(30°C, 40°C, Crease Care
60°C-Eco )
cotton(underwear...)
Polyamide, Acryic,
Polyester
Synthetic
Colored
Quick 30
is
Hand Wash
40˚C
(30˚C, 60°C)
Laundry which
30°C
Rinse+
30˚C
Intensive
(Cold)
Rinse+
30˚C
Intensive
(40°C, Cold)
Rinse+
soiled fast.
lightly
"Hand Wash" marked
/ Wool
laundry
or
machine
washable woolens
Delicate
laundry easily
damaged
(silk, curtains...)
Delicate
Bedcover
Only for
60˚C
bedcover
(95°C)
For elimination of
protein stains
Bio Care
Baby Care
Laundry for
1.5
60˚C
infant
95˚C
Less than
1.0
Medic Care Rinse
Intensive
Rinse+
Crease Care
Medic Care Rinse
Intensive
Rinse+
Pre Wash
Crease Care
kg
kg
Less than
1.0
kg
Less than
1.0
kg
2.0
kg
Less than
1.5
kg
Less than
1.5
kg
Less than
1.5
kg
3.0
kg
Less than
2.0
kg
Less than
2.0
kg
Less than
2.0
kg
Rating
Rating
Rating
Rating
Rating
Rating
Less than
Less than
Less than
3.0
kg
4.0
kg
6.0
kg
laundry is heavily soiled, "Pre Wash" Cotton is recommended.
Pre Wash is available in Cotton and Synthetic Program.
Eco : By selecting Eco function, the water temperature is reduced and washing time is lengthened.
So you can economize in your consumption of heating energy.
Intensive : When washing heavily soiled laundry you can increase effectiveness by choosing "Intensive" option.
Medic Care Rinse : For high effectiveness or more purity in rinse operation you can choose Medic Care Rinse
option. It can be chosen in all course with the exception of Hand Wash/Wool, Delicate,
Pre Wash
:
If the
Quick 30.
Rinse+: Used
Crease Care
to introduce an additional
:
If you want to
prevent
rinse, which may assist in removing
traces of
detergent residue.
crease, select Crease Care button.
13
H
ow
to
washer
use
Baby Care
Cotton
Bio Care
Bedcover
Medic Care
Rinse
Eco
Intensive
Delicate
Synthetic
?
?
Press the
Press the
-
2. Manual
automatically
Power(
)
button to start.
Start/Pause(
)
Wash
:
main wash
Rinse
:
3 times
button.
?
?
1200 rpm
[WD-1236(0~9)SD/1236(0~9)ND/1236(0~9)TD]
14
) button
to start.
Select the conditions which you want to
use, by turning the program dial and
each button.
selecting the each conditions, please
refer to the page15~page20
[WD-1036(0~9)SD/1036(0~9)ND/1036(0~9)TD]
Program : Cotton
Power(
For
?
:
Press the
pressing
1000 rpm
Water temperature
Selecting
on.
-Spin:
-
Crease Care
Initial conditions
-
-
Pre Wash
Rinse+Spin
selected upon power
?
Rinse+
Quick 30
Hand Wash/
Wool
1. Cotton
No Drain
60˚C
Press the
Start/Pause(
) button.
H
ow
to
use
washer
Baby Care
Cotton
Bio Care
Bedcover
Medic Care
Rinse
Eco
Intensive
Delicate
Synthetic
Dial
:
Dial
:
:
Start / Pause
Spin
Button
:
Pre Wash
Crease Care
Rinse+Spin
Program
Button
Rinse+
Quick 30
Hand Wash/
Wool
(1)
(2)
(3)
(4)
No Drain
Medic Care Rinse
(5)
(6)
(7)
(8)
(9) Child Lock
(10) Button : Power
(11) Button : Time Delay
Button
:
Intensive
Button
:
Rinse+
Button
:
Pre Wash
Button
:
Crease Care
Option
?
Medic Care
Rinse
By turning the Option
button, all Option
functions may be
selected.
Intensive
Rinse+
3. Rinse+
?
?
Pre
Wash
For additional rinse which may assist in
removing traces of detergent residue.
By selecting Rinse+ function,
time and the rinse water
are
the rinse
increased.
Crease Care
1. Medic Care Rinse
?
high effectiveness or more purity in
rinse operation you can choose Medic
Care Rinse option. It can be chosen in all
course with the exception of Hand
For
Wash/Wool, Delicate, Quick 30.
4. Pre Wash
?
If the
laundry
course
?
is
heavily soiled,
"Pre Wash"
is effective.
Pre Wash is available in Cotton and
The
required lamp
will
Synthetic.
light up for identification.
2. Intensive
?
?
If the
is
laundry heavily
option is effective.
soiled "Intensive"
By selecting the Intensive option, the wash
time may be extended, depending on the
5. Crease Care
?
If you want to prevent crease, select this
button with spin speed.
program selected.
15
H
to
ow
use
washer
Spin
?
By turning the Spin dial,
the spin speed can be
chosen.
No Drain
No Drain
900
[WD-1036(0~9)SD/
WD-1036(0~9)ND/
WD-1036(0~9)TD]
[WD-1236(0~9)SD/
WD-1236(0~9)ND/
WD-1236(0~9)TD]
Spin only:
1. Press the Power buton.
No Drain
2. Set the desired
the
Spin
spin speed by turning
Dial.
3. Press the Start/Pause button.
1. Spin selection
?
Spin Speed
is available
the program
?
as
2. No spin
according
to
follows.
WD-1036(0~9)SD/1036(0~9)ND/1036(0~9)TD
-
Cotton, Synthetic, Rinse+Spin, Quick 30,
Bio Care, Hand Wash/Wool
NoSpin-NoDrain-400-600800-900-1000
-
?
Delicate, Bedcover, Baby Care
after
required lamp
identification.
Cotton, Rinse+Spin, Quick 30, Bio Care
NoSpin-NoDrain-400-600800
-
1000
-
1200
Hand Wash/Wool,
Synthetic
NoSpin-NoDrain-400-600800
-
-
-
1000
Delicate, Bedcover, Baby Care
NoSpin-NoDrain-400-600-800
16
will
the washer stops
light
up for
3. Rinse Hold
?
Is selected
by turning
the
repeatedly
this function leaves clothes in
spin
dial
the machine; suspended in the water
after a rinse without entering into spin.
WD-1236(0~9)SD/1236(0~9)ND/1236(0~9)TD
-
spin is selected,
draining water.
The
NoSpin-NoDrain-400-600-800
?
If No
?
To
proceed through
once
the rinse hold function is
using Spin
(Spin)
The
to a drain or
dial to the
required lamp
identification.
will
required
light
spin,
completed
program.
up for
H
ow
to
use
Water
washer
Child Lock
Temp.
Baby Care
Cotton
Bio Care
Bedcover
Eco
Delicate
Hand Wash/
Wool
Synthetic
If you choose to lock the buttons on the control assembly
to prevent tampering this function may be selected.
Quick 30
1. Child Lock
Rinse+Spin
?
Child Lock
can
be set
by pressing
the
Rinse+ button and Pre Wash button
?
By turning
the
temperature
-
the water
Program Dial,
can
simultaneously. (About
be selected.
three
seconds)
Cold
-30˚C/40˚C/60˚C/95˚C
?
Water temperature can be selected
according to the program.
?
The
required temperature lamp
for identification.
For the
refer
more
to the
detailed
will
light up
?
information, please
When child lock is set, all buttons
except for power button.
?
locked
To deactivate Child Lock system, press
Rinse+ and Pre Wash buttons
simultaneously again. (About
page13.
are
To
change
three
seconds)
to the desired program, whilst
in child lock mode.
1. Press both
once
Rinse+ and Pre Wash together
again. (About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button
?
again.
The child lock can be set at any time and
it is automatically canceled when
operational errors occur. Also Child Lock
works when power is off.
17
H
to
ow
washer
use
Time
Program
Delay
Baby Care
Cotton
Bio Care
Bedcover
Eco
1. Time
Delay
Delicate
Preparing washing before starting
"Time Delay"
Turn on the water tap.
Synthetic
Quick 30
Hand Wash/
Wool
Rinse+Spin
-
-
-
Load
laundry and close the door.
Place the detergent and fabric softener
?
in the drawer.
?
?
How to set "Time
-
Program dial to select
the program you require.
Press Time Delay button and set
the
1. Program
When Start/Pause button is
Press the Start/Pause button.
(":" blinks.)
selected.
If Time
is
?
button is
Delay
displayed. The
"3:00"
pressed,
maximum delayed
time
is 19 hours and the minimum time is
3 hours.
-
By turning the Program dial, the
program is selected in order of
Cotton
Eco
Synthetic Quick 30
"
--
--
--
Each
on
?
of the button advances
pressing
time delay by
--
one
To cancel the time
hour.
delay,
press the
Power button.
?
?
up to indicate selected
light
pressed,
the Cotton program is automatically
-
?
will
to
Turn the
desired time.
?
Lamp
according
program.
Press Power button.
-
-
Delay"
10 programs are available
the laundry type.
Time
'expected time' from the
present to the completion of washing
cycle or selected process (Wash, Rinse,
Spin).
Delay
According to
is
the condition
of water supply
delayed time and the
and temperature, the
actual washing time may vary.
18
--
Rinse+Spin
Delicate
--
--
Hand Wash/Wool
Bedcover
--
--
Bio Care
Baby Care".
Regarding to
the
program Please
laundry type for each
refer to the page13.
ow
H
to
use
washer
Power
Start/Pause
1. Start
?
1. Power
This Start/Pause button is used to start
wash
cycle
or
pause the wash
?
cycle.
?
Press the Power button to turn power
and off
To cancel the Time
power button
2. Pause
?
?
?
temporary stop of wash cycle is
needed, press the Start/Pause button.
?
NB. The door will not open before 1 to 2
minutes when Pause is selected,
When the Power button is
the
pressed,
for Cotton program.
And the other initial conditions as
washer is
When in Pause, the power is turned off
automatically after 4 minutes.
at the end of the wash
the
Delay function,
should be pressed.
2. Initial Program
If
or
on
ready
follows.
?
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
cycle.
Initial program
[WD-1036(0~9)SD/1036(0~9)ND/1036(0~9)TD]
-
Cotton
Program
/ Main wash /
Normal Rinse / 1000 rpm / 60˚C
[WD-1236(0~9)SD/1236(0~9)ND/1236(0~9)TD]
-
Cotton
Program
/ Main wash /
Normal Rinse / 1200 rpm / 60˚C
19
ow
H
to
washer
use
Display
3. Completion of
?
When
washing cycle is completed,
is displayed on the "Multi
display".
"
1. Special function
?
display
"
"
?
?
delay is selected, it shows
remaining time to finish the selected
When time
the
"
4. Time left
?
When child lock is selected, the
is displayed.
During washing cycle,
time is displayed.
(
)
<
diagnosis display
-
-
?
If the machine encounters
operation,
displayed.
a
fault
during
-
the associated fault will be
-
-
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
:
Water pressure
:
Problem of
:
Door is not closed
:
Water inlet trouble
:
Drainage
:
Unbalanced load
:
Water temperature trouble
:
Over load in motor
:
Over load in motor
sensing
overfilling
error
-
water
-
-
-
trouble
-
?
?
If these
letters
displayed, please
refer to the troubleshooting page24 and
follow the guide.
20
error
are
the
Recommended program
remaining washing
by
manufacturer.
WD-1036(0~9)TD/WD-1036(0~9)ND/
WD-1036(0~9)SD
:
program.
2. Self
washing
> :
WD-1236(0~9)SD/WD-1036(0~9)SD
Cotton
(95˚C) : around 1 hour and 43<33> minutes
Cotton (60˚C) : around 1 hour and 39 minutes
Synthetic : around 1 hour and 16(17) minutes
Quick 30 : around 30 minutes
Rinse+
Spin
:
around 17 minutes
Hand Wash/Wool : around
51(52)
minutes
Delicate : around 51 minutes
Bedcover
Bio Care
around 1 hour and 28 minutes
:
:
Baby Care
around 2 hours and 21 minutes
:
around 2 hours and 24<14> minutes
The
washing time may vary by the amount of
laundry, water pressure, water temperature and
other washing conditions.
If
an
unbalanced load is detected
or
if the suds
program operates, the wash time may
be extended.
removing
(Max. increasing time
is 45
minutes.)
M
aintenance
Before
the washer interior,
cleaning
unplug the electrical power
cord to avoid electrical
shock to avoid electrical shock hazards.
When
of the
disposing
cut off the mains
appliance,
door lock to prevent young children
being trapped
cable, and destroy the plug Disable the
inside.
The water inlet filter
"
-"
detergent
-
message will blink
error
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the filter
CAUTION
is clean to
1.
smooth
laundry.
running of your
using "Drain" program and then open
whatever any threads or objects.
Be careful when draining if the water is hot.
or
the lower
Open
cap ( ) by using
opening
cover
a
the door in
2.
this time
plug ( )
water
pull
out
the hose.
an
cleaning
carrying
remove
out emergency
emergency.
use a
flowing
machine.
the pump filter to
the drain pump,
Unplug the drain plug ( ),
allowing the water to flow out.
coin. Turn the drain
to
ensure
left in the
First drain
Allow the water to cool down before
emptying
objects
3. Remove any
At
vessel to prevent
on
to the floor. When
foreign
from the pump filter
cleaning,
After
( )
clockwise and insert the drain
)to
the
plug (
the pump filter
close the lower
open to the left.
( ).
turn the pump filter
water does not flow any more, turn
( )
material
original place.
cover
cap.
100
3
1
2
3
2
21
aintenance
M
drawer
Dispenser
After
?
?
?
a
while
detergents
and fabric softeners leave
It should be cleaned from time to time with
a
a
deposit
jet of running
water.
If necessary it can be removed completely from the machine
downwards and by pulling it out.
To facilitate
cleaning,
in the drawer.
by pressing
the upper part of the fabric softener compartment
the catch
can
be removed.
max
The drawer
Detergent
can
be cleaned
?
recess
also accumulate inside the
with
occasionally
washing
?
replace
the drawer and
continuously
clogs appliances,
build up in
and if it is not
the
washing
If you
run a
washing drum is made of Stainless steel, specks
articles (paper clips, safety pins) which have been left in
Although
The
which should
old toothbrush.
If you live in a hard water area, limescale may
seen and thus not easily removed.
metal
?
recess
drum
Over time the build up of scale
be replaced.
?
an
Once you have finished cleaning,
rinse cycle without laundry.
The
?
max
use
kept
places where
in check these may have to
of rust
can
be caused
or
bleaches, make
Descaler may contain chemicals that may
Remove any spots with
22
small
drum should be cleaned from time to time.
descaling agents, dyes
use
by
the drum.
sure
they
are
suitable for
washing
use.
Never
it cannot be
steel wool.
a
stainless steel
damage part
of your
cleaning agent.
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
methylated spirits, diluents
use
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer
through
a
complete cycle using hot
water.
Repeat process if necessary.
NOTE
Remove hard water
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
a
expelled.
dry the drum interior, and close the door.
dispenser drawer drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
23
roubleshooting
guide
T
This
machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
washing
Possible Cause
Symptom
Rattling
clanking
and
?
noise
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
Vibrating
sound
noise
?
?
Heavy wash loads
a thumping sound.
If sound continues, washer is
probably
out of balance.
normal.
redistribute wash load.
Have all the transit bolts and
If not removed
packing
?
may produce
This is usually
been removed?
Are all the feet
the
Stop
and
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
Oversudsing
detergent
or
unsuitable
detergent may cause excessive
foaming which may result in water
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
is not
hose(s)
are
The filter of the inlet
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
?
24
slowly.
or
clogged.
or
?
drains
Drain hose is kinked
The drain filter is
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
roubleshooting
guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
be plugged in or connection
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
breaker tripped,or a power
Reset circuit breaker
outage has occurred.
If
Do not increase fuse
problem
is
it corrected
?
Water
supply tap
is not turned
Turn
on
a
by
water
replace
capacity.
or
fuse.
circuit overload, have
a qualified electrician.
supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
must
begins to spin. The door
lock before spin can be
achieved.
Door does not open
Once started, the door can not be
opened for safety reasons.
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
amount of laundry, water
pressure, water temperature and
other usage conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
roubleshooting
guide
T
Possible Cause
Symptom
?
?
?
?
?
?
?
?
?
supply is not adequate in area.
Water supply taps are not completely open.
Water inlet hose(s) are kinked.
The filter of the inlet hose(s) are clogged.
Check another tap in the house.
Drain hose is kinked
Clean and
Water
The drain filter is
clogged.
clogged.
or
Fully open tap.
Straighten hose(s).
Check the filter of the inlet hose.
straighten
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
an
imbalance detection
the drain hose.
Clean the drain filter.
Load is too small.
and correction system. If individual heavy
articles are loaded (ex. bath mat, bath robe,
?
Solution
or
2 similar items to
help
load to allow proper
etc.) this system may stop spinning or even
interrupt the spin cycle altogether.
If the laundry is still too wet at the end of the
cycle, add smaller articles of laundry to
balance the load and repeat the spin cycle.
Close the door.
?
Is the door
opened?
If
"
"
is not released, call for
service.
Unplug
the power
plug
service.
?
Water overfills due to the
faulty
water valve.
Close the water tap.
Unplug the power plug.
Call for service.
?
?
?
26
Water level
sensor
Over load in motor.
Over load in motor.
has malfunctioned.
and call for
T
of Warranty
erms
What Is Not Covered:
?
?
?
?
Service
trips
to your home to teach you how to
If the
product
rating plate.
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by factors
use
the
product.
other than that shown
misuse
or
on
the
Act of God.
other than normal domestic
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
of
product
or
change
by pests for example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
on use
example
water drain
warming beeps.
the installation for
example, levelling
the
product, adjustment of
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
?
?
?
Replace fuses
Incidental
example, grit, nails,
in or correct house
Correction of unauthorized
the owner's manual.
/ substances from the machine,
pump and inlet hose filter for
?
by
wiring
or
correct house
plumbing.
repairs.
or
product
the
bra wires, buttons etc.
consequential damage to personal property
possible defects with this appliance.
If this
including
caused
by
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement of
defective part, shall be borne by the owner.
a
27