LG | WF-T1092TP | LG WF-T1092TP Owner's manual

roduct Features
PThe
Trubo Drum washing machine does not operate with the lid open. If the lid is opened during
wash, rinse and spin cycles, the machine will stop automatically.
"For better wash of lots of
of
detergent
is
laundry, putting more heavily-soiled laundry first and using about 300g
recommended, but if too much foam is made, decrease the amount of detergent."
Fuzzy Logic Control
A built-in load
automatically detects and
load
and a microprocessor
laundry
optimizes washing conditions such as ideal water
consumption and washing time.
measures
sensor
the
Advanced technology is built into the Electronic Control
System which ensures the best washing result.
Turbo Drum
washing
While the "Punch + 3" pulsator rotates in one direction, the Turbo
Drum rotates in the opposite direction. This creates an even flow
of water in both the upper and lower parts of the drum, resulting
in and an enhanced washing and rinsing action.
3
Step washing
3 step
washing
makes the best
Rubbing and Shaking
Rubbing
Punch
+
washing performance with
3
washing
low
tangling.
Shaking and Disentangling
action
The Punch action's powerful vertical water thrust combined
with the rotating pulsator movement improves washing
performance and reduces tangles.
3
Spinning mini-pulsators create powerful jets of water which
the laundry up and down in the drum to ensure your
laundry is evenly and thoroughly washed.
move
Lint Filter
Lint and loose threads from
washing cycle
wash.
are
laundry generated during the
caught by the lint filters for a cleaner
Contents
Read this manual
Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of time and
money over the life of your washer. You will find many answers to common problems
in the
Troubleshooting
section. If you review
chart of
our
Troubleshooting Tips first,
may not need to call for service at all.
Introduction
Before
Starting
Safety
to Wash
information
4
Identification of Parts
5
Function Information
6
Preparation Before Washing
7
Use of Water,
Bleach
8
Guide for Stain Removal
11
Detergent,
and Softener
Special
Function of each Button
Washing Programs
Fuzzy
Wash
12
(Normal Wash)
14
Jean Wash, Delicate Wash, Wool Wash
Favourite Wash
16
Wash
17
Economy
Soak Wash
Additional Function
Options
Installation
Care and Maintenance
Delay
start
18
(Reservation)
Wash
Option Washing
20
Other useful Functions
22
Placing
and
Connecting
Water
Connecting
Drain Hose
Grounding
23
Leveling
Supply
Hose
Method
Terms of
Warranty
Specification
24
27
28
29
Cleaning
Troubleshooting
19
Cleaning
and Maintenance
30
Common
washing problems
31
Troubleshooting
32
Terms of
33
Warranty
Specification
34
you
4
S
afety
information
WARNING!
Read and follow this
safety information carefully.
safety, the information in this manual must be followed to minimize the risk of fire or
explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
For your
Introducin
Save these instructions.
?
WATER HEATER
Under certain conditions hydrogen gas may be produced in a water heater that has not been
used for two weeks or more.
Hydrogen gas can be explosive under these circumstances. If the
hot water has not been used for two weeks or more, prevent the possibility of damage or injury
by turning on all hot water faucets and allowing them to run for several minutes. Do this before
using any electrical appliance which is connected to the hot water system. This simple
procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not
smoke or use an open flame or appliance during this process.
SAFETY
?
PROPER
Install or store where it will not be exposed to temperatures below
freezing or exposed to the
weather.
INSTALLATION
?
Properly ground washer to conform with all governing codes and ordinances. Follow details in
Installation Instructions.
YOUR
?
LAUNDRY
AREA
?
Keep the area underneath and around your appliances free of combustible materials such as lint,
paper, rags, chemicals, etc.
Close supervision is necessary if this appliance is used by or near children. Do not allow children
to
?
WHEN USING
?
THE WASHER
play on, with, or inside this or any other appliance.
Use this appliance only for its intended purpose as described in this Owner's Manual.
Never reach into washer while it is moving. Wait until the machine has completely stopped
before opening the lid.
?
Do not mix chlorine bleach with ammonia or acids such
as
vinegar and/or rust remover. Mixing
different chemicals can produce a toxic gas which may cause death.
?
Do not wash or dry articles that have been cleaned in, washed in, soaked in,
combustible or explosive substances (such as wax, oil, paint, gasoline,
spotted with
dry-cleaning solvents,
or
kerosene, etc.) which may ignite or explode. Do not add these substances to the wash water. Do
or
place these substances around your washer or dryer during operation.
The laundry process can reduce the flame retardancy of fabrics. To avoid such a result,
not use
?
carefully
follow the garment manufacturer's wash and care instructions.
?
To minimize the possibility of electric
shock, unplug this appliance from the power supply or
disconnect the washer at the household distribution panel by removing the fuse or switching off
the circuit breaker before
NOTE:
Pressing
attempting any maintenance or cleaning.
Power button to turn off does NOT disconnect the appliance
from the power supply.
?
Never attempt to operate this
or
?
WHEN NOT IN
Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage if a break
or
USE
?
appliance if it is damaged, malfunctioning, partially disassembled,
including a damaged cord or plug.
has missing or broken parts,
rupture should occur. Check the condition of the fill hoses; they may need replacement after 5
years.
Before discarding
a
washer, or removing it from service, remove the washer lid to prevent
children from hiding inside.
?
?
Do not attempt to repair or replace any part of this appliance unless specifically recommended in
this Owner's Manual, or in published user-repair instructions that you understand and have the
skills to carry out.
Do not tamper with controls.
5
Identification
of Parts
Body
supply hose
(1EA
2EA)
?Power detergent softener
Introducin
?Water
or
?Lint filter
?Power cord*
?Control
panel
?Inner tub
*
*
?Drain hose
*
for pump model
?Pulsator
*
?Drain hose
for
?Adjustable leg
Accessories
Note
*
Parts
can
be different
according
to the model.
non
*
pump model
box
6
F
unction Information
Our machine
of laundry.
Different
Introducin
provides
various
washing
methods which suit various conditions and types
types of laundry washing
Fuzzy
(Normal) Wash
Use this
The
Program for normal clothes except for woolen clothes and lingerie.
automatically detects the quantity of laundry and selects the appropriate
washing time, rinsing time and spinning time. (refer to page 14)
sensor
power,
water
level, wash
Jean Wash
Thick and
(refer
heavy clothes or those which are excessively dirty like jeans
to page
or
working uniforms can be washed.
14)
Delicate Wash
Use this program to wash delicate and washable laundries.
(refer to page 14)
Wool Wash
Delicate clothes
(lingerie, wool, etc.)
which may be
The fibers of machine washable woolens have been
easily damaged can be washed.
(refer to page 14)
specifically modified to prevent felting when they are machine washed.
Most handknitted garments are not made of machine washable wool and we recommend that you hand wash them
Before washing your woolens check the care label for the washing instructions.
?
?
?
?
When
washing woolens use a mild detergent recommended for washing wool.
Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.
To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight.
tumble action of a
(The heat and
of woolen
dryer may
shrinkage felting
garments.)
underlays and sheepskin products can be washed in a washing machine but may cause pump blockages.
(Ensure that the whole article is suitable for machine washing and not just the backing material.) You may wish to
handwash these articles and place them in the machine to spin dry.
cause
or
Some wool
Favourite wash
This
setting
allows you to store your favorite wash condition in the normal
Washing according
Speedy
(Memory wash)
to the condition of
cycle memory.
laundry
Wash
Speedy wash can be
selected to wash
moderately
soiled clothes of less than 3.2
kg in a short time.
(refer to page 17)
Soak Wash
Soak Wash
and
grime.
(refer to page 16)
can
be selected to wash
heavily
soiled
laundry by soaking in water for some time to remove dirt
(refer to page 18)
Other washing method
Delay
start
(Reservation)
Wash
Delay start (Reservation) Wash is used to delay the finishing time of the operation.
Delayed start washing can be set according to preference.
(refer to page 19)
Option
Wash
Spin, Wash, Wash/Rinse,
or
Rinse, Rinse/Spin only options
can
selected.
(refer to page 20)
7
Before
Preparation
Washing
Care Labels
*
a care label on your clothes. This will tell you about the fabric content of your garment
and how it should be washed.
Look for
Sort clothes into loads that
can
be washed with the
same
wash
cycle, water temperature and spin speed.
Sorting
To get the best results, different fabrics need to be washed in different ways.
?
SOIL
?
COLOR (Whites, Lights, Darks)
LINT (Lint producers, Collectors)
?
(Heavy, Normal, Light)
Lint Producers
Terry cloth, Chenile, Towels, Nappies, Diapers
Synthetics, Corduroy, Permanent Press, Socks
Lint Collectors
Check before
?
?
?
pockets to make sure that they are empty. Things such as nails, hairclips, matches,
and keys can damage both your washer and your clothes.
Mend any torn garments or loose buttons. Tears or holes may become larger during washing.
Remove belts, underwires, etc. to prevent damage to the machine or your clothes.
coins,
Pretreat any dirt and stains.
sure the clothes are washable in water.
?
Make
?
Check the
?
Remove tissue in
washing instructions.
pockets.
Pretreatment
?
on
stains
or
heavy
soil
Pretreat shirt collars and cuffs with
Before
?
Loading
Check all
pens,
?
Separate clothes according to the type and amount of so
Separate white fabrics from colored fabrics.
Separate lint producers and lint collectors.
Use
a
a pre-wash product or liquid detergent when placing them in the washer.
washing treat special stains with bar soaps, liquid detergent or a paste of water and granular detergent.
pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The
longer they are left the harder they are to remove.
(For more detail refer to page11)
Loading
Do not wash fabrics
Load Size
The water level should just
cover
the clothes.
Adjust the load size accordingly.
Loosely load clothes no higher than the top row of holes in the washer tub. To
add items after washer has started, press Start button and submerge additional
items. Close the lid and press Start button again to restart.
Light
and
WARNING
containing flammable materials (waxes, cleaning fluids, etc.).
Large-sized clothing
Clothes like downs and woollens
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer
can completely remove oil.
dry anything that has ever had any type
of oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
Do not
light weight, large and float easily. Use a nylon net and
laundry floats during the wash cycle, it may
become damaged. Use dissolved detergent to prevent the detergent from clumping.
wash them in
a
are
small amount of water. If the
Long laundry items
nylon nets for long, delicate items. For laundry with long strings or long length a net will prevent
tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.
Nylon net is not supplied by LG.
Use
,
BeforStaingWsh
8
U
BeforStaingWsh
Using
se
of Water,
Detergent,
Bleach and Softener
Water
Amount of Water Level
?
?
This machine detects the
will be shown
the control
on
?
The
?
When the water level is
following table
though the
?
same
The amount of
Water
a
it may differ depending
the control panel.
automatically detected,
cup in the
diagram is
on
about
on
the
quantity of laundry even
40g for concentrated detergent.
temperature
The machine sets the
You
appropriate temperature automatically according to the wash program
change
by pressing the WATER TEMP button.
The temperature of the water impacts the effectiveness of all laundry additives and therefore,
the
results. We recommend temperatures of:
White
HOT 49~60°C...(120-140˚F)
colorfast items.
can
-
-
.
the water temperature
-
WARM
29~40°C...(85-105˚F)
COLD* 18~24°C...(65-75˚F)
items, diapers, underclothing
and
heavily soiled,
cleaning
Most items
Only very bright colors with light soil.
washing in cold water additional steps may be needed:
Adjust detergent amount and pre-dissolve detergent in warm water
When
-
-
-
-
*
(to be used)
panel.
water level is indicated
?
?
then sets the water
shows the amount of water.
?
?
quantity of laundry automatically,
level and proper amount of detergent.
When you select a wash program, the water level and amount of detergent
Pretreat spots and stains
Soak heavily soiled items
Use
appropriate bleach
Temperature below 18°C...(65˚F) will not activate laundry additives and may cause lint, residue, poor
cleaning, etc. In addition, detergent manufactures and care labels define cold water as 26~29°C...(80-85˚F).
If the temperature of the water in the tub is too cold for your hands, the detergent will not activate and clean
effectively.
Attention
If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown
or orange spots or streaks. Iron is not always visible. Installation of water softener or an iron filter may be
necessary for
severe cases.
Using Detergent
Detergent
Follow the
Use
more
detergent package directions. Using too little detergent is a common cause of laundry problems.
detergent if you have hard water, large loads, greasy or oily soils or lower water temperature.
Choosing the right detergent
use of domestic detergent, (powder, liquid or concentrated). Soap flakes or
granulated soap powders should not be used in your washing machine. When washing woolens
remember to use detergent suitable for washing woolens.
We recommend the
9
Using Detergent
How much
detergent
When you select a wash program the water level and the amount of detergent (to be used) will be
shown on the control panel. The amount of a cup in the diagram is about 40g for concentrated
detergent.
The correct amount of detergent will vary depending on the amount of soil in your clothes
and work cloches may need more detergent, while bath towels usually need less.).
For
liquid and concentrated detergents,
follow the recommendations of the
(Jeans
detergent manufacturer.
Note: To check you are using the correct amount of detergent, lift the lid of your machine
about half-way through the wash. There should be a thin layer of foam over the surface of the
good, but it does not contribute to cleaning your clothes. No
enough detergent has been used; soil and lint can settle back on the clothes
water. Lots of foam may look
foam
means
not
or
washing machine.
If excess detergent is used, the rinse will not be as clean and efficient. Also, it could cause
environmental pollution, so use it accordingly.
the
Adding
the
detergent
Open the detergent dispenser and deposit the appropriate amount of detergent where you deposit the
detergent
Powder Detergent dispenser.
Some detergents MUST be fully dissolved before adding to your machine to get the best wash results.
Check the instructions on the detergent packet.
If you use powdered detergent it is essential that the required amount be fully dissolved in very hot
water before being added to warm or hot water for the actual wash.
Pre-dissolving detergent in warm water when washing in cold water can improve its performance.
Powder
Where you
deposit the
detergent
Detergent /
Fabric Softener
dispenser.
10
U
BeforStaingWsh
of Water,
se
Detergent,
Bleach and Softener
Fabric Softener
Using
Available Fabric Softener
?
Do not
?
For
use
concentrated fabric softener. This may cause some problems in automatic
products instructions for use.
dispensing.
details refer to the softener
more
Depositing
?
Type
Fabric Softener
Don't use softener with
detergent. Use
Powder
softener in last rinse water
?
When
?
When
Detergent /
Fabric Softener
dispenser.
Where you deposit
the softener
using dispenser, dilute softener (30ml)
with fresh water (30ml)
?
?
filling dispenser, do not splash or
overfill. It may stain clothes.
Never pour fabric softener directly
Limit Line
on
Depositing
clothes.
It may stain them
If spotting occurs, wet and rub with hand
If the softener is over
filled, it can overflow.
dishwashing liquid (or mild bar soap) and
Fabr ic
Softener
Cap
softener
don't fill it
above the
limit line.
rewash.
Note
Fabric Softener will be inserted
automatically during
the final rinse and the machine
When water pressure is low, the softener may have to be inserted
Scrud(Waxy
Build
gives on
alarm sound.
manually.
up)
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener
comes into contact with detergent. This build-up is not brought about by a fault in the machine.
If scrud is allowed to build-up in the machine it
smell in your washer.
If you wish to
?
?
?
?
?
use
fabric softener
we
result in stains
on
your clothes
or an
unpleasant
recommend
Using fabric softener sparingly.
filling the dispenser, do not splash or overfill.
Clean dispenser as soon as the cycle is finished.
Clean your machine regularly. (refer to page 30)
Cold water washing increases the chance of this build-up occurring. We recommend a regular warm or hot
When
wash e.g. every 5th wash should be at least
?
can
Fabric softener of thinner
build-up.
consistency
a warm one.
is less
likely to leave residue on the dispenser and contribute to
a
11
Special
Guide for Stain Removal
Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or
products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:
?
?
?
?
?
?
Read and comply with all instructions on stain removal products.
Keep stain removal products in their original labeled containers and out of children's reach.
Thoroughly wash any utensil used.
Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents
or other flammable or explosive substances because they give off vapors that could ignite or explode.
Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.
For successful stain removal:
?
Remove stains
?
Determine the kind of
promptly.
stain,
then follow the recommended treatment in the stain
removal chart below.
?
To pretreat
stains, use a prewash product, liquid detergent, or a paste made from
granular detergent and water.
?
Use cold water
?
Check
?
Check for colorfastness
?
Rinse and wash items after stain removal.
care
on
unknown stains because hot water
label instructions for treatments to avoid
by testing
stain
can
on
remover on an
set
stains.
specific fabrics.
inside
Follow fabric
seam.
care
label
instructions
Stain Removal
TREATMENT
Adhesive tape,
rubber cement
chewing gum,
Baby formula, dairy products, egg
Beverages (coffee, tea, soda, juice,
alcoholic beverages)
Blood
Candle wax, crayon
Chocolate
Collar or cuff soil, cosmetics
Dye transfer on white fabric
Grass
Grease, oil, tar (butter, fats, salad
dressing, cooking oils, car grease,
motor oils)
Ink
Mildew, scorch
Mud
Mustard, tomato
Nail polish
Paint, varnish
Rust, brown or yellow
discoloration
Shoe polish
Apply ice. Scrape off excess. Place stain face down on paper towels.
nonflammable dry cleaning fluid.
Use product containing enzymes to pretreat or soak stains.
Pretreat stain. Wash using cold water and bleach safe for fabric.
Rinse with cold water. Rub with bar soap. Or pretreat
safe for fabric.
or
soak with
Saturate with
prewash stain remover or
product containing enzymes. Wash using bleach
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.
Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning
fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Pretreat with prewash stain remover or rub with bar soap.
Use packaged color remover. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Wash
using hottest water safe for fabric.
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured
alcohol or nonflammable dry cleaning fluid.
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and hot water before washing. Badly
mildewed fabrics may be permanently damaged.
Brush off dry mud. Pretreat or soak with product containing enzymes.
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,
OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate detergent and
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
LIQUID : Pretreat with a paste of granular detergent and water. PASTE : Scrape residue from fabric. Pretreat with
prewash stain remover or nonflammable dry cleaning fluid. Rub detergent into dampened area, Wash using bleach
safe for fabric.
12
F unction of each Button
How to select
BeforStaingWsh
Time
Temp. (option)
?
start
(Reservation), Alarm indication
During operation, the remaining time is indicated, and while paused,
washing time, rinsing time, and spin time is indicated. For example, while
washing, "1:09" indicates the time combined remaining for wash, rinse, and spin
indicates a wash time of 15minutes, 2 Rinse
cycles. When paused
times, and 6 minute spin time.
Time left
Used to select proper
water temperature of
-
the
washing water.
[COLD
left, Delay
,
?NWARM
(Hot
and cold light turn on) ?N
HOT ?NCOLD ] mode
Delay start (Reservation) indication When Delay start (Reservation) program is
selected, it indicates for the finishing time. (RES. DELAY)
-
repeats.
=
Alarm indication
-
When
an error
occurs,
an error
message appears to indicate the
abnormality.
Wash power button
?
?
This button allows you to select
the strength of the water current.
Power
option
selections
light up
in sequence as follows
NORMAL ?N STRONG
GENTLE
button is
?N
NORMAL
pushed.
This
?N
as
can
the
be
selected for any program, but
washing jeans, it starts
when
with
Strong.
Adjustment can be made while
washing.
?
Delay
Water level button
(indication
of
detergent amount)
adjust the water level as required. The appropriate amount of
detergent is shown next to the water level in the WATERDETERGENT diagram
?Water level is automatically selected for fuzzy normal and jean
LARGE
?N
settings
are
indicated
LARGE, EX-LARGE
as
the button is
pushed
?N
EX-LARGE
?N
SMALL
SMALL, MEDIUM ?NMEDIUM ?NMEDIUM, LARGE
LARGE
Note
The control
panel may differ according
(Reservation)
button
?Use to
programs.
The following
start
to different models.
?N
?N
?
Use to set
a
delayed finishing
time.The time increases when the
button is
pushed.
(refer to page 19)
13
Washing progress
Program
AUTO OFF
button
button
Indicator
Use for
selecting wash program.
This button allows you to select 6
different programs for different kinds
?
The
is to show the
cycle
washing progress.
The light turns on for the
process to be progressed,
flickers during cycle operation,
and it turns off automatically at
the cycle's completion.
?
?
name
(Power)
?
of laundry and dirtiness.
DELICATE
?N
WOOL
FUZZY
?N
?N
ECONOMY
FAVOURITE
?N
Push
or
?
JEAN
on or
again
and power goes
on
off.
The power goes off
automatically for about 10
seconds after the wash is
?N
(NORMAL), by pressing
Use to turn the power
off.
?
Program selections light up in sequence
as follows: FUZZY (NORMAL) ?N
?
?
finished.
the
button.
Start/ Pause button
?
?
?
Use to start
or
pause the
washing process.
Repeats start and pause by
pushing the button.
The power goes off
automatically 10 minutes after
stopping.
Child lock function
?
Use to lock
or
Wash. Rinse.
unlock the control buttons to
prevent settings from being changed by
a
child.
?
lock, push rinse, spin buttons
simultaneously and to unlocking push them
one more time during the washing process.
?
Use when wash,
Spin
button
rinse, spin time
need to be
?
The time increases when the button is
?
If
To
?
adjusted.
pressed
.
adjustments are needed during the wash, press the [start/pause]
button before making any changes.
When the button is pressed during washing, the remaining time
is displayed. (refer to page 20, 21)
(refer to page 22)
:
3 step works at
large and medium water level of Fuzzy and Jean Program.
BeforStaingWsh
14
W ashing Programs
The figure within
¡
WashingProm
arrow
is processing order
manually.
Add
the
Washing
Programs
Add
the detergent
laundry
Fuzzy Washing
(Normal Wash)
Used for normal
loads, this
¡GAdd the appropriate
quantity of detergent
as indicated by the
mode
automatically selects the
most appropriate conditions and
completes the sequence in one
operation. The built-in sensor
water level next to
WATER-DETERGENT.
detects the size of the load and
Or follow the
the ideal wash power and wash,
rinse and spin times are set
detergent
manufacturer's
Instructions
accordingly.
Jean Wash
Use
jeans program when
washing heavy, thick, and
extremely dirty laundry such
jeans and work outfits.
as
¡GSelect the
Jean
program on
the Control
panel.
Delicate
Use this program to wash items
requiring a gentle wash action.
This would include
blouses,
and dress shirts with
nylons
light soiled.
¡GSelect the
Delicate
program on
the Control
panel.
Wool Wash
Use this program for
delicate fabrics such
washing
as lingerie
and woolens.
(wash only "water washable"
clothes)
Before washing your woolens
check the
care
label for the
washing instructions.
(wash only water washable
clothes)
¡GSelect the
Wool
program on
the Control
panel.
¡GUse neutral
detergent
appropriate for the
laundry.
¡GWhen washing
woolens
use a
mild
detergent
recommend- ed for
washing wool.
15
Close the lid
Caution & Note
Finish
already in the tub, or putting wet laundry into
starting will increase the water level.
¡GWith light weight bulky, water level can be set low.
¡GChanges to water temperature (hot/cold) and wash level
are possible during operation.
(refer to page 12)
¡GIf
water is
the tub before
rotates for
¡GThe pulsator
8 seconds to detect the
load.
laundry
¡GThen the water
level
and the amount of
detergent to
be used
will be
¡GWater
supplied
for 2
minutes after the
start of the wash to
the
supplement
laundry
will be shown and
water the
water will be
has absorbed.
supplied.
¡GWhen
the wash
program ends,
the buzzer will
ring for
10
seconds before
the Power goes
off automatically.
¡GBefore starting to wash,
make
sure
that the
laundry
is
washable.
¡GWhen setting the water level manually, do not set to
MEDIUM to prevent damage to laundry.
¡GWashing with hot water may damage the laundry
(Water is set to cold automatically). Ensure that the load
is under 2kg.
¡GTo dry woolens lay down them flat on a towel and pat
into shape. Dry woolens out of direct sunlight.(The heat
and tumble action of a dryer may cause shrinkage or
felting of woolen garments.)
¡GIn order to avoid damage to laundry, the spin cycle
may appear slow. This also avoids wrinkles and
clothing may still contain some water. This is normal.
¡GSoak Wash cannot be selected for the Wool Wash
program.
WashingProm
16
avourite Wash
F
WashingProm
?
Program
Pressing the favourite button allows you to store your favourite wash
conditions in the normal cycle memory and then recall it for use at a later
time.
1
Press the AUTO OFF
2
Select the FAVOURITE program.
3
Select your favourite wash conditions.
(Power)
button to turn power
?
on.
Press the WATER TEMP. button to select wash water
temperature.
?
Press the WATER LEVEL button to select water level.
?
Press the WASH POWER to select STRONG
GENTLE wash
?
or
option.
Press the WASH
button, the RINSE button & the SPIN
time, rinse times & spin time
button to select wash
respectively you
4
want to store.
Press the START/PAUSE button to store & start your favourite wash
Power turns off automatically after wash.
Note
To recall your favourite cycle.
1. Press POWER on.
2. Select the favourite cycle by pressing the PROGRAM.
3. Press the START/PAUSE button. Then the wash cycle starts.
cycle.
17
Economy
Use this mode when washing lightly soilded clothes for
The weight should be under 3.0kg.
1
Press the POWER button to turn power
2
Press the PROGRAM button to select
a
short time.
WashingProm
on.
Economy.
Select the SPEEDY program
3
Add the
detergent.
The
on
the Control
panel.
appropriate quantity of detergent marked next to
the
water level of WATER-DETERGENT.
4
Add the
laundry
and press the START/PAUSE button.
The water level and the amount of detergent to be used will
be shown and water will be
5
Close the lid.
Finish
supplied.
supplied for 2 minutes after the start of the
supplement the the laundry has absorbed.
Water will be
wash to
When the wash program ends the buzzer will ring for
10seconds before the Power goes off automatically.
18
S
WashingProm
oak Wash
washing excessively dirty laundry by soaking in water for some time to
proteins and fats.¡fiSOAK¡fl mode can be used with all washing programs
simultaneously except for WOOL and DELICATE program.
Use this mode for
remove
1
Press the AUTO OFF
2
Press the PROGRAM button to select the
(Power)
button to turn power
on.
washing program.
The SOAK will not work in WOOL and DELICATE
cleaning
Program.
3
Press the WASH button, to select SOAK program.
Keep pressing the WASH button until
the light turns on¡fiSoak¡fland¡fiWash¡fl
simultaneously as next image.
SOAK program only works when socking
time is
4
Add the
detergent.
The
40, 50
or
60 minutes.
appropriate quantity of detergent marked next to
the
water level of WATER-DETERGENT.
5
Add the laundry and press the START/PAUSE button.
The water level and the amount of
be shown and water will be
6
detergent to
supplied.
be used will
supplied for 2 minutes after the start of the
supplement the absorbed water by the laundry.
Water will be
Close the lid.
wash to
Finish
When the wash program ends, the buzzer will ring for
10seconds before the Power goes off automatically.
Note
?
?
?
Order of Soak-Wash
timingSoak-Wash
Select soaking time 40minutes, 50minutes,
the Wash button repeatedly.
or
60minutes
If necessary, select the times of Rinse and the time for
buttons till you reach the desired times.
(including washing time) by pressing
Spinning by pressing
the Rinse
or
Spin
19
(Reservation) Wash
start
Delay
Delay start (Reservation) Wash is used to delay the finishing time of the
hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time not the start time.
operation.
The
,
1
Press the AUTO OFF
2
Press the PROGRAM button to select the
(Power)
button to turn power
3
Press the DELAY START
washing program.
Select the program for laundry on the Control
This method will not work in Wool Program.
?
(RESERVATION)
panel.
button.
light will
The
?
AditonalFucOps
on.
'
DELAY' turn
on
and 'TIME LEFT'
will be marked.
repeatedly to set the desired finishing time.
example,
washing in 9 hours from now, by
make the number 9:00 pressing the DELAY START
(RESERVATION ) button repeatedly.
Press the button
?
To finish
For
(RES.=DELAY)
4
Add the
The
?
detergent.
Add the
laundry
When the lid is open the machine will not operate, and
alarm signal will remind you to close the lid.
an
and press the START/PAUSE button.
When you press the START/PAUSE button the
blink and the time will be shown.
?
6
the
water level of WATER-DETERGENT.
?
5
appropriate quantity of detergent marked next to
?
Close the lid.
supplied for 2 minutes after the start of the
supplement the water the laundry has absorbed.
Water will be
wash to
Finish
light will
The
washing will be finished according to
the
delayed time.
Note
?
Finishing
time
be
can
delayed
from 3~48hours.
Delaying
from3~12hours
can
be done in 1 hour time
intervals and from 12~48hours in 2 hour time intervals.
?
If the lid is open, the machine will not work, and
an
alarm
signal will
alarm to remind you to close the
lid.
?
To select
washing time, rinsing times, spinning time, water level, hot/cold or wash power manually,
(RESERVATION) button and select the desired option. Then press the
press the DELAY START
START/PAUSE button.
?
When the
laundry cannot be taken out immediately after the wash program ends, it is
spinning program (The laundry will be wrinkled if left for a long time after spinning.)
.
better to omit the
20
0
AditonalFucOps
1
ption Washing
When you
only
need the Wash, Wash/Rinse
or
Rinse
cycles,
these
can
be set
manually.
Press the AUTO OFF
2
(Power)
button to turn power
Only Wash
Only Wash,Rinse
Press the WASH button to select the
desired
timing.
on.
(refer to page 13)
Press the WASH button to select the
desired timing.
(refer to page 13)
Press the RINSE button to select the
desired times of rinse.
(refer to page 13)
can use this option for
wrinkles of laundry
You
3
preventing
Press the WATER LEVEL button, to control the water level according to the
laundry. If you do not choose anything, it is set the middle water
level automatically.
(refer to page 12)
amount of
4
Add the
5
Press the START/PAUSE button.
6
Add the
laundry
into the
detergent
washing
tub.
and close the lid.
21
1
Press the AUTO OFF
2
Only
(Power)
button to turn power
on.
Only Rinse,Spin
Rinse
Only Spin/Only drain
Press the RINSE button to
Press the RINSE button to
Press the SPIN button to
select the desired times of
select the desired times of
select the desired times of
rinse.
rinse. (refer to page 13)
rinse.
(refer to page 13)
(refer to page 13)
Press the SPIN button to
select the desired times of
rinse. (refer to page 13)
3
Press the WATER LEVEL button to control the water
level according to the amount of laundry. (refer to page 12)
4
Add the
5
Press the START/PAUSE button.
6
Add the
laundry
into the
detergent
washing
When you want to only
drain, wait until the water in
the washing tub drains
completely.
tub.
and close the lid.
Note
When
a
Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the
water will not be drained off. If you wish to drain the water, press SPIN button and wait until the
water in the tub has drained completely. Then press the START/PAUSE button.
If you do not specify the water level, then Medium will be automatically selected.
If only Rinse is selected, the process will start from Water Supply.
AditonalFucOps
22
O
ther Useful Functions
Child Lock Function
AditonFucOps
If you want to lock all the
use
the child lock
keys to prevent all the setting from being changed by a child, you can
option.
How to Lock
1
Press the AUTO
OFF(Power)
button.
Turn Power
2
Press the START/PAUSE button to start
washing.
After all
3
on.
washing
Press both the RINSE button and the SPIN button
conditions
are
set
according
to the manual.
simultaneously.
During the wash program, all the buttons are locked
washing is completed or it is child- lock
function is deactivated manually.
until
How to Unlock
If you want to unlock
during wash, press both the RINSE
and the SPIN button
simultaneously again.
Note
"
"
Mute
& the
remaining
time
are
alternatively shown
on
the
display while they
are
locked.
Option
If you want to use the washing machine without alarm
buttons simultaneously.
To make buzzer
The
the
one more
time.
Time
remaining time for each process, press one of the WASH,
remaining time for each process will appear for about 1 second.
see
press both the WASH and SPIN
work, press both the WASH and SPIN buttons simultaneously
Seeing Remaining
To
signal sounds,
RINSE and SPIN buttons.
23
Placing
1
and
Place the machine
Leveling
on a
flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2cm to the
right side and left sides of the machine for ease of
more
installation.
At the rear,
a
than 10cm
minimum clearance of 10cm is
suggested.
more
than
2cm
more
than 2cm
2
Check that the machine is level
Open the lid
same as
and look from above to
see
Top
view of the machine
if it is
shown. Check that the bubble of the level
indicator is
placed in the center.
Level indicator
3
Leveling
Level indicator
the machine
Lift the front of the
washing machine and twist
Adjustable Leg until the surface bubble is
placed in the center.
the
Adjustable legs
Level indicator
Caution
If the appliance is supplied from a cord extension set or generator, the cord extension set or electrical
portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
Instal ion
24
C
onnecting
Connecting
Water
Supply Hose
Before connecting the Water Supply Hose to the water tap, check the hose type and then
choose the correct instruction here under. Note that the Water Supply Hose supplied may
vary from country to country. Make sure to connect the blue inlet hose to the cold water tap,
and the orange inlet hose to the hot water tap.
Water
Normal
Supply
Hose to water
Type
Untighten
the
(Normal tap without thread &
screw
type inlet hose.)
Rubber
screw
Untighten the screw of the connector so
tap can be placed in the middle.
Fixing
tap
packing
that the
screw
Connector
the connector to the tap
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
Attach the water
to the connector
Push the water
supply
hose connects
supply hose vertically upwards
that the rubber seal within the hose
completely to
can
securely
so
Connector
adhere
the tap.
Water
Supply
Fixing
the connector to the water
supply
hose
Attach the water
then
supply hose to the connector and
tighten it by screwing it to the right.
Check the connection of water
After
supply
connecting the hose, open the tap to check
for any water leakage.
If the connection leaks, close the tap and start
again from step
1
hose and the connector
Hose
25
Normal
Type
Separate
(Normal tap without thread & one touch type inlet hose.)
Middle connector from Water
Supply
Separate Middle connector from the Water
Supply Hose by pulling the Pressing Rod and the
Pressing Handle that is attached to the Water
Supply Hose while pressing them.
Ho
Middle
ed Sticker
conne
essing
Handle
essing
Rod
ater
Supply
Hose
Loosen the fixed nuts to connect the connector to the tap
Untighten the screw of the connector so that the
tap can be placed in the middle.
Rubber
packing
screw
Fixed sticker
Note
In
case
the tap is too
large.
If the tap diameter is too large or is square,
untighten the 4 screws and remove the guide
er
packing
plate.
Fixing Connectors to
the
Tap
Connecto
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
Fixing Upper Connector
and Middle Connector
Remove the fixed sticker in between the
Conn
Upper
and Middle Connectors. Tighten the connectors
by holding one connector and twist middle
connector to the right.
Connecting
e
ecto
Fixed
Middle Connector and Water
Supply
pressing rod of the Water Supply
separated from middle
connector(refer to Step1) and then join it to the
sticker
ector
le
Connector
Hose
Press down the
Hose which
was
Pressing
rod
middle connector.
Water
Check for the water
After
leakage
the
hose, open the tap to check
connecting
for any water leakage.
If the connection leaks, close the tap and start
again from step 1.
skip step1, Water leakage may occur.
If you
Supply
Hos
ng handle
26
C
onnecting
Screw
Water
Supply
Hose
Type
Attach the water
supply
hose to the tap.
Push the water supply hose up so that the rubber
packing within the hose can adhere completely to
the tap.
Water
tap
Rubber
Water
Connect the water
supply
Packing
Supply
hose to the tap.
Connect the water
tighten it by
supply hose to the tap and then
screwing it to the right.
Check water
leakage.
After
connecting the hose, open the tap to check
for any water leakage.
Connecting
Water
Supply
Connect the water
the
Hose to the machine
supply hose to
inlet valve of
and then lock it by
washing machine,
connecting part.
turning
the hose
Check
to
see
if there is
a
rubber seal inside
Hose connector
the connector.
Rubber seal
Hose
27
Drain Hose
Connecting
Before connecting Drain Hose, check your Drain Hose model and choose the correct
instructions.
Pump
1
Fit the machine end of the drain hose to the outlet
2
Put the other end of the drain hose
of the drain pump and
Fit the
holder at the
tighten the clamp.
over
the
wash tub.
standpipe
plastic
or
holder into either holes for the
of the machine.
rear
The holder is
possible
according
location of the
sure
Instal ion
Model
to
that the holder
to
fit at either direction
standpipe. Make
keeps firmly the drain hose
that the drain hose should not fall down.
so
Note
To prevent siphoning, the drain hose should not extend more than 50mm from the end of the hose
The discharge height should be approximately 0.9
1.2 m from the floor.
~
1
None
Pump
Model
Before
connecting
Ensure that the hose
2
clip
is set
as
indicted here.
Connect the Elbow Hose
Push the elbow hose toward the
body of the
washing machine.
3
Place the Drain Hose
change the direction of the hose, pull out the
change the direction.
Repeat Step2.
To
elbow hose and
guide.
28
G
rounding
Earth wire should be connected.
If the earth wire is not connected, there is
current
CarendMitc
Grounding
Method
possible danger
of electric shock caused
by
leakage.
Method with Ground insert space Terminal
If the AC current outlet has
ground terminal, then
separate grounding
required. Note that AC
outlet
power
configurations may differ from country
a
is not
to
nd Terminal
country.
rminal.
Other
Grounding
Method
Burying Copper
Plate
Connect the Ground Wire
Plate and
bury it
more
to
a
Ground
Copper
ground.
than 75cm in the
d Wire
Using Ground
Wire
ground Wire to the socket provided
exclusively for Grounding.
Connect the
Using Short Circuit
Breaker
Using a Circuit Breaker and If grounding methods
described above are not possible, a separate
circuit breaker should be employed and installed
by a qualified electrician.
Caution
To prevent a possible explosion, do not connect ground to a gas pipe.
Do not connect ground to telephone wires or lightning rods.
This may be
dangerous during electrical storms..
Connecting ground to plastic has no effect.
Ground wires should be connected when
an
extension cord is used.
the
29
Cleaning
When water supply into the tub is not clean or the filter is clogged with particles(such as
sands...), clean the filter in the inlet valve occasionally.The figure of power cord and water
tap may vary according to the country.
CarendMitc
To Clean the Filter in the Inlet Valve
1
Close the tap before
2
turning
off the power.
Select both hot/cold and then
press the
button to
cord.
[START/PAUSE]
remove
the machine
3
water from
completely.
4
After
removing the water
supply hose pull out the filter.
Then
Turn off the power
pulling out the
before
use a
Replace the filter
after cleaning it.
brush to clean
the filter.
Caution
?
Before
cleaning the filter,
the
impurities in the water supply hose
should be removed.
To Clean the Lint Filter
1
2
Pull out the lint filter from
3
Turn the net inside out
the tub in the direction
to clean the filter and
shown below.
rinse it with water.
Replace- the filter to the
original location. Push the
lip of the filter until a pop
sound
is
heard
Note
If the lint filter is torn
To Clean the
1
damaged, purchase a new one from LG service center.
Pump casing (for pump model)
Unfasten 4
back
or
screws
2
of the
cover
Turn the cap as shown in
diagram and unfasten it.
3
fasten it.
Remove
such
as
Reassemble the cap to
the arrow direction and
foreign objects
pin, button, coin,
etc
(Bottom view)
Self-cleaning function(for
pump
(Bottom view)
model)
In the initial stage of every washing machine process, the drain pump works for 3~5seconds to pump out
water with dirt from the washing tub. It helps to keep the wash tub clean and improve pumping ability.
Caution
?
Check if water leaks after
reassembling. (The
Rubber
ring
is in the
cap)
30
C
CarendMitc
leaning
and Maintenance
When there is a fear of
?
?
?
freezing
Close the water taps and remove the Water Supply Hose.
Remove the water which remains in the water supply.
Lower the drain hose and drain the water in the bowl and the drain hose
by spinning.
If frozen
?
?
?
supply hose, and immerse it in hot water at approx.. 40˚C.
Pour approx.. 2 liters of hot water at approx.. 40˚C, into the bowl and let it stand for 10 minutes.
Connect the water supply hose to the water tap and confirm that the washing machine performs the
Remove the water
supply
and
Wash Inner-tub
drainage of water.
Leave the lid open after washing to allow moisture to evaporate. If you want to clean
use a clean soft cloth dampened with liquid detergent, then rinse. (Do
the inner-tub
not use harsh or
Inlet Hoses
Hoses
connecting washer to faucet should be replaced every 5 years.
Immediately wipe off any spills. Wipe with damp cloth. Try not to hit
sharp objects.
Exterior
Long
Vacations
Be
sure
water
be below
Cleaning the
?
?
supply
freezing.
surface with
is shut off at faucets. Drain all water from hoses if weather will
Inside of your Washer
If you use fabric softener or do
the inside of your washer.
?
gritty cleaners.)
regular cold water washing,
it is very
important that you occasionally clean
Fill your washer with hot water.
Add about two cups of
a
powdered detergent that contains phosphate.
Let it operate for several minutes.
?
Stop the washer,
?
After
soaking,
open the lid and leave it to soak
drain the washer and
run
it
overnight.
through
We do not recommend that you wash clothes
a
normal
cycle.
during this procedure.
31
Common washing problems
Many washing problems involve poor soil & stain removal, residues of lint and
damage. For satisfactory washing results, follow these
scum, and fabric
instructions.
Troubleshting
WASH PROBLEM
Problems
Poor soil
removal
Solutions & Preventive Measures
Possible Causes
?
Not
?
Wash water
enough detergent
?
?
?
?
?
?
the washer
Overloading
Do not
Use
amount of
hot water for normal soil.
warm or
Different water temperature may be
Incorrect wash
cycle
sorting
?
pretreat stain
Reduce load size.
?
Wash with Jean
Incorrect
size,
soil and water hardness.
temperature
too low.
Use correct amount of detergent for load
soil type.
(refer
to page
8)
Soak(Turbo)
or
required according to
& Jean wash
cycle for
soiled
?
?
heavy
laundry.
Separate heavily soiled items from lightly soiled ones.
Pretreat stain and heavy soil according to directions shown
on
Blue Stains
?
Undiluted fabric softener
dispensed directly
onto
?
?
fabric
page 7.
Rub the stain with bar soap. Wash.
Do not overfill fabric softener
liquid fabric
softener
See page 10 for
?
Black or gray
marks on
clothes
Yellow or
brown rust
stains
A
buildup
caused
by
the
?
interaction of fabric
softener and
detergent
can
flake off and mark clothes
?
Not
enough detergent
?
Iron
or
water
or
manganese in
supply,
water
?
instructions.
Keep the recommendations against Scrud(waxy buildup).
(refer to scrud page10.)
Use correct amount of detergent for load
size,
amount of soil
and water hardness.
?
To restore discolored load of whites,
use
rust
remover
safe
for fabric.
pipes,
water heater
more
dispenser and do not pour
directly onto fabric.
?
Install
nonprecipitating
water softener
or an
iron filter in
supply system for an ongoing problem.
Before washing, run water for a few minutes to clear lines.
your water
?
Lint
?
?
?
Residue
or
detergent
Incorrect
sorting
Tissues left in pocket
Overloading the washer
?
Overloading
?
Undissolved
?
Use too
the washer
detergent
much detergent
?
?
Incorrect
use
of chlorine
?
?
Unfastened
zippers,
hooks, buckles
Ribs, tears and broken
?
Overloading the washer
Degradation of fabric
synthetic fabrics and remove tissues
sorting and caring
See page 7 for
Do not overload the washer
?
Do not overload the washer.
?
?
detergents need to be pre-dissolved, check the
detergent instructions. Try pre-dissolving the detergent.
Increase water temperature using hot water safe for fabric.
Use proper amount of detergent.
Some
Never pour chlorine bleach
See page 9 for
?
Fasten
?
Remove
threads
?
towels, flannelette sheets, separately
?
bleach.
snags
eg
pockets before wash.
before loading.
?
Holes, tears,
givers
from lint collectors eg
?
or
Wash lint
directly on fabric.
adding liquid bleach.
zippers, hooks,
objects
in
and buckles.
pockets.
loading.
?
Do not overload the washer.
See page 7 for
caring before
in
32
T roubleshooting
Before
Troubleshting
calling
for service check the
Symptom
Water
Supply
Failure
Error
problem against
the list belows.
Message
Check up
.
.
Is the water tap shut off?
Is the water supply cut off ?
.
Is the tap
.
Is the water pressure low
valve
.
or
water
supply hose frozen
or
?
is the filter of the inlet
clogged with impurities?
Is Hot/Cold selected to Hot when the hose connected is
Cold?
.
Drainage
Failure
Is the Cold hose connected to Hot?
.
Is the drain hose
.
Is the drain hose bent
.
Is the internal part of the hose
positioned correctly?
or placed too high?
or
drain pump
(only pump model) clogged with impurities?
.
Spin
Failure
Door(Lid) Open
Internal
failure
sensing
Power failure
Overflow failure
Check if electric power has gone off.
.
Is the
laundry evenly balanced?
.
Is the
washing machine placed on
.
Is the lid closed?
.
a
flat surface?
Please call your nearest LG Electronics Service Center
for help.
33
of
Terms
Warranty
What Is Not Covered:
?
?
?
?
Service
If the
trips
to your home to teach you how to use the
product
is connected to any
voltage
product.
other than that shown
the
rating plate.
Act of God.
If the fault is caused
by accident, neglect, misuse
If the fault is caused
by factors other than normal domestic
or
on
use or use
in accordance
with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
sound,
?
?
?
?
?
product
or
change
by pests for example,
the set-up of the
product.
rats or cockroaches etc..
example
water drain
the installation for
example, levelling
Normal maintenance which recommended
the
by the
product, adjustment
foreign objects / substances from the machine, including
filter for example, grit, nails, bra wires, buttons etc.
fuses in
or
correct house
Correction of unauthorized
Incidental
If this
wiring
correct house
the pump and
plumbing.
repairs.
consequential damage
appliance.
or
product
or
of drain.
owner's manual.
Removal of
Replace
sound, spin
warming beeps.
Correcting
with this
?
of
vibration that is considered normal for
or
inlet hose
?
on use
to
personal property
caused
by possible defects
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
a
34
S pecification
Specifaton
H
D
W
Model
WF-T1091~3TC(H/P),WF-T1191~3TC(H/P)
Weight
47
Size
625(W)x625(D)x1030(H)
Water tab pressure
30 -800 kPa
In
our
kg
(0.3
-8
kgf /cm2)
continuing effort to improve the quality of our appliances,
changes to the appliance without revising this manual.
to make
it may be necessary
Download PDF