LG | LH-R4400 | LG LH-R4400 Owner's manual

BN-LH-R4400-Eng-65D
DVD Recorder Receiver
System
OWNER'S MANUAL
MODEL
:
LH-R4400
(DR6900, LHS-A4400T, LHS-A4400C, LHS-A4400WA/WD/WX)
Before
connecting, operating
adjusting this product,
booklet carefully and completely.
please
read this instruction
or
Safety
Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
to constitute
magnitude
a
risk of electric
shock to persons.
The exclamation mark within
is intended to alert the
important operating
user
an
equilateral triangle
to the presence of
and maintenance
instructions in the literature
(servicing)
accompanying the
appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
confined space
a
similar unit.
CAUTION:
This DVD Recorder
To
ensure
manual
proper
carefully
employs
use
of this
a
Laser
read this owner's
product, please
and retain for future reference should the unit
require maintenance, contact
(see service procedure).
an
Use of
or
controls, adjustments,
other than those
System.
specified
authorized service location
the
performance
of
procedures
herein may result in hazardous radi-
ation exposure.
To
prevent direct exposure
to laser
beam, do
not
try
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The
(dripping
as
vases,
apparatus
must not be
to water
splashing) and no objects filled with liquids,
should be placed on the apparatus.
or
This
product
is manufactured to
radio interference
DIRECTIVE
73/23/EEC.
2
exposed
requirements
comply
such
with the
of EEC
89/336/EEC, 93/68/EEC and
SERIAL NUMBER: The serial number is found
on
the back of
this unit. This number is
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
___________________________________
___________________________________
to
Before Use
Ta ble of Contents
SafetyPrecautions.........................2
Precautions
TableofContents..........................3
BeforeUse................................3
Precautions.............................3
Guidetosymbols.........................3
Diagramsofequipment....................4-5
FrontView..............................4
RearView..............................4
Handling
the unit
When
shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
DisplayWindow..........................4
RemoteControl..........................5
To
SpeakerPositioning........................6
Do not
Connections.............................7-8
near
SpeakerSystemConnection................7
Antenna(Aerial)Connections................7
.8
ConnectingtoOptionalEquipment.
Display Information about External Digital Input
Signal.................................8
Presettingtheradiostations.................9
Listeningtotheradio.......................9
.
.
.
.
.
.
.
.
.
the surface clean
keep
insecticide spray,
the unit. Do not leave rubber of plastic products in
use
volatile
contact with the unit for
leave marks
such
liquids,
a
as
long period
of time.
will
They
the surface.
on
.
RDSFunction-OPTIONAL..................10
AboutRDS............................10
ProgrammeSearch(PTY).................10
SpeakerSetup............................11
DelayTimeSetting.......................11
MiniGlossaryforSoundMode...............12
SoundAdjustment.........................13
SoundMode...........................13
SoundLevel............................13
Installing
Do not install the unit in
bookcase
confined space, such
built-in cabinet.
or
as a
Allow
adequate air circulation to prevent internal heat
buildup.
Do not place the unit on surfaces (rugs, blankets,
etc.) or near materials (curtains, draperies) that may
block the ventilation slots.
Do not install the unit
ators
light,
place heavy objects
TestTone..............................13
To clean the cabinet
use a
such
as
radi-
on
the unit.
the unit
Mute.................................13
a
sources
air ducts, or in a place subject to direct sunexcessive dust, mechanical vibration or shock.
Do not
Use
heat
near
or
Cleaning
SleepTimerSetting......................13
Selectinginputsource....................13
BeforeRequestingService..................14
Specifications............................15
a
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzine,
or
lightly
use
thinner,
are
moistened with
a
extremely dirty,
mild detergent
strong solvents, such
as
these
as
might damage
alcohol,
the surface
of the unit.
Guide to
symbols
Indicates hazards
itself
or
other
harm to the unit
likely to cause
material damage.
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
Manufactured under license from
Dolby Laboratories.
"Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished
works. Copyright 1992-1997 Dolby Laboratories. All rights
reserved.
Manufactured under license from
Digital
Theater
Systems,
Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380,
5,978,762 and other world-wide patents issued and
pending.
"DTS" and "DTS
trademarks
1996, 2000
Digital Surround" are registered
of Digital Theater Systems, Inc. Copyright
Digital Theater Systems, Inc. All rights
reserved.
3
Diagrams
of
equipment
Front View
Rear View
Display
Window
TUNING(-/+)
VOLUME
(/)b uttons
MEMORY
button
POWER switch
(ON/OFF)
SELECT
button
/ON
POWER Cord
Subwoofer
Speaker
antenna
AUXILIARY
Connectors
terminal
OPTIONAL
COAXIAL INPUT
Connector
Display Window
MUTE indicator
RDS indicator
SLEEP indicator
Sound mode
indicator
FM stereo
receiving
Delay
time/Sound
indicator
mode/Sleep
Test tone/RDS etc. Indicators
4
time/
SPEAKER
Connectors
OPTICAL INPUT
Connector
of
Diagrams
equipment
Remote control
POWER button
OPEN/CLOSE button
Function Select buttons
DVD Button
SPEAKER button
TV button
AV/FUNC. button
.
.
.
0-9 Numerical buttons
TITLE button
MARKER button
SEARCH button
ZOOM button
SLEEP button
.
.
AUDIO button
.
.
MO./ST. button
.
.
DRC button
.
SUBTITLE button
.
MENU/LIST button
SETUP button
v/V/b/B
(up/down/left/right)
buttons
ENTER/MEMORY button
TUN.
CH/PR/PRESET
(-/+) buttons
(-V/v+) buttons
.
.
.
RETURN button
.
VOLUME buttons
DISPLAY button
LEVEL button
REC MODE button
.
DELAY button
TIMER REC button
.
MUTE
.
SKIP
(-./M++)
buttons
SCAN
(-m/M+) buttons
STOP (x) button
PAUSE/STEP (X) button
PLAY (B) button
RECORD (z) button
.
REPEAT button
.
.
REPEAT A-B button
.
.
RANDOM button
.
.
TEST TONE button
.
.
BY-PASS button
.
;PLII button
.
CHP ADD button
.
SOUND button
.
THUMBNAIL button
CLEAR button
Controlling
.
can
Remote Control
operate your TV's functions.(LG brand
RDS
.
PTY
(OPTIONAL) button
(OPTIONAL) button
Operation Range
Point the remote control at the remote
and press the
sensor
buttons.
only)
Hold TV and press CH V
turn the TV on or off.
.
.
TV with the remote control
The remote control
) button
.
.
TV/DVD button
(
or
CH v button
repeatedly
until
Distance: About 23 ft
Angle:
(7 m)
from the front of the remote
sensor
About 30° in each direction of the front of the remote
sensor
Remote control
battery installation
Detach the battery
remote
cover on
control, and insert
AAA) batteries
rectly.
with
the
rear
two R03
and
of the
(size
aligned
cor-
Caution
Do not mix old and
batteries
new
batteries. Never mix different
types of
(standard, alkaline, etc.).
5
Speaker Positioning
In the
?F
of normal
case
use
of the 5
speakers (2
speakers,
center
speaker
and 2
rear
speakers).
r ont
speakers
According to your listening position
speakers to 45 degrees.
?
front
Center
set up the
speakers equal distance, apart
and set up the interval between
speaker
It is ideal that the center
and front
speakers
speakers
are same
height.
But you
can
place
it above
or
below the
television.
?
Rear
speakers
Place the left and
right behind the listening area. These speakers recreate sound motion and atmosphere required
for surround playback. For best results, do not install the rear speakers too far behind the listening position and
install them at or above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall
or ceiling to further disperse the sound.
In the case of a smaller room size, if the audience is near to the rear wall set the rear speakers opposite each
other, and set the rear speakers above 60 90 cm than the listener's ears.
-
Center
Front
Rear
Speaker
Front
Speaker
(Right)
Speaker
(Left)
Rear
Speaker
(Right)
Speaker
(Left)
Speaker Positioning Example
1
Important Note
About Ferrite Core(OPTIONAL)
Be
sure
to attach the ferrite
(for connecting
This ferrite
to this
core can
to the Power cord
reduce noise.
core.
stopper [a] of the ferrite
core
2. Wind the Power cord
once on
3. Close the ferrite
until it clicks.
6
2
unit).
How to attach the ferrite
1. Push the
core
core
to open.
other ferrite
core.
3
Connections
Speaker System
Connection
Connect the
cords. To
speakers using the supplied speaker cords by matching the colors of the terminals and those
obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.).
of the
otes
Be
sure
to match the
speaker
cord to the
terminal
appropriate
on
the
components:
+
to
+
and
--
to
--.
If the cords
are
reversed,
the sound will be distorted and will lack base.
If you use front speakers with low maximum input rating,
Do not disassemble the front cover of supplied speaker.
adjust
the volume
carefully
to avoid excessive
output
on
the
speakers.
OPTIONAL
Antenna
(Aerial) Connections
Connect the
supplied
FM/AM antennas for
listening
to the radio.
For AM(MW) reception, connect
the loop antenna (aerial) to the
terminal marked AM
FM external
75
coaxial
cable
antenna(aerial)
(not supplied)
AM
loop antenna (aerial)
(Supplied)
FM indoor
antenna(aerial)
FM 75
FM
FM external
antenna(aerial)
(not supplied)
Position
it for the
best
reception
AM(MW) loop
antenna (aerial)
AM
AM
otes
?T
o
prevent noise pickup, keep the AM loop
?
Be
?
After
to
antenna away from the unit and other
extend the FM wire antenna.
fully
connecting
sure
the FM wire antenna,
keep
it
as
horizontal
as
components.
possible.
7
Connections
Connecting
Connecting
to
(Cont'd)
to
Optional Equipment
amplifier
with two-channel
analog
stereo or
Dolby Surround
Connect Left and
jacks
on
Connect
Right AUX INPUT jacks on the Dolby Digital Speaker System into the Audio
DVD player, Digital Device or stereo system by the supplied audio cables (A).
your
Left and
Right
OUT
of the
Dolby Digital Speaker System DIGITAL AUDIO OUT jacks (OPTICAL O or COAXIAL C) to the
jack on your DVD player, Digital Device or Stereo system. Use an optional digital (optical O or
one
corresponding out
coaxial C) audio cable.
OPTIONAL
Rear view of
Dolby Digital Speaker System
Display
This
display
Information about External
appears
depending
UNLOCK DISPLAY
on
the
change
Digital Input Signal
of the external
digital input signal.
appears when the problem gets in external digital input while normally operating in optical or coaxial function. It could be displayed instantaneously according to the external
system quality while operating in switching audio
CHANNEL DISPLAY
8
appears when the Audio coding mode is changed
changed or the function mode is switched.
1+1
ch1, ch2
1/0
C
2/0
L,R
3/0
L,R,C
2/1
L, R, S(Mono Surround)
2/2
L,R,Ls,Rs
3/1
L, R, C, S(Mono Surround)
3/2
L,R,C,Ls,Rs
.1
or
LFE
signal,
no
LFE
signal
in
or
skip,
open and channel
up/down.
when the stream information is
Presetting
the radio stations
5
ote
Adjust
POWER switch
before
operation
You
preset
can
make
on
the
to select ON
backpanel
6
50 stations for FM and AM. Before
that you have turned down the
volume to the minimum.
tuning,
1
sure
Press SELECT
control)
(or
AV/FUNC.
to select the
frequency (AM
or
-
The station is stored.
Repeat steps
2 to 5 to store other stations.
To clear all the memorized stations
the remote
on
Press MEMORY.
FM) you
Press and hold MEMORY for about two seconds, "MEM
CLEAR" appears on the display window and then press
MEMORY, the stations are cleared.
want.
Every time you press
changes alternately.
2
this button, AM and FM
Press TUNING
(-/+) (or TUN.(-/+) on the remote
control) until the frequency indication starts to
change.
For your reference
If all stations have already been entered, FULL message
will appear in the display window for a moment and then
preset number will blink. To change the preset number,
follow the steps 4-5.
a
otes
?
Automatic
To recall
Tuning
Press TUNING
(-/+) (or TUN.(-/+)
on
the remote
Press TUNING
(-/+) (or TUN.(-/+)
control) briefly and repeatedly.
3
4
in
a
station.
the remote
A
preset number will flash in the display window.
Press PRESET
(-/+)
to select the
preset number
you want.
to the radio
Press SELECT
control)
(or
AV/FUNC.
to select the
the remote
on
frequency (AM
or
FM) you
want.
To turn off the radio
Press POWER to turn the unit off
For your reference
If an FM program is
?
Press MO./ST.
3
Press PRESET
(-/+) repeatedly
preset station you
to select the
Adjust the volume by pressing
repeatedly.
(-/+)
that "STEREO"
disappears
on
the
restore the stereo effect.
?
To
improve reception
Repose the supplied antennas.
non-preset radio stations
?
Use manual
?
For automatic
(or TUN.(-/+)
VOLUME
so
noisy
display window. There will be no stereo effect, but the
reception will be improved. Press MO./ST again to
want.
Each time you press the button, the unit tunes in
one preset station at a time.
To listen to
select another
this button, AM and FM
The last received station is tuned in.
-
or
function mode.
Every time you press
changes alternately.
2
or
(-/+) until the desired preset
press it repeatedly.
Press MEMORY.
Listening
1
on
Press and hold PRESET
number appears
control) for more than 0.5 seconds.
Scanning stops when the unit tunes
Manual Tuning
-
?
presets
or
automatic
tuning,
on
tuning
in
step
2.
press and hold TUNING
the remote
(-/+)
control).
9
RDS Function
OPTIONAL
-
About RDS
Programme Search (PTY)
This unit is
A
equipped with RDS (Radio Data System),
which brings a wide range of information from FM radio.
RDS is a system for transmitting station call signs or
network information, a description of station programme
type text message about the station or specifics of musi-
ability to encode broadcasts with Programme Type (PTY) codes that indicate
the type of material being broadcast. The following list
major
benefit of RDS is its
shows the abbreviations used to indicate each PTY
along
with
explanation
an
of the PTY.
cal selection and the correct time.
RDS
Tuning
When
containg RDS data is tuned in, the
unit will automatically display the station's call sign and
the RDS indicator will light in the Display Window as
well as indicators for the programme type recognition
(PTY), Radio Text (RT), Clock Time (CT) and RDS services programme (PS) if transmitted by the station.
RDS
a
FM station
Display Options
The RDS
system is capable of transmitting
ety of information in addition
a
to the initial call
wide vari-
sign
that
appears when a station is first tuned. In normal RDS
operation the display will indicate the station name,
broadcast network
front
panel
data
types
or
call letters.
enables you to
in the sequence:
FREQUENCY
(PS
Pressing RDS on the
cycle through the various
PTY
RT
CT)
(Programme type recognition)- The programme
type is shown on the display window.
?RT (Radio text recognition)- The radio station's name
is displayed on the display window.
CT (Time controlled by the channel)- Enable the unit
to receive the actual time and show it on the display
?
PTY
?
window.
?
PS
is
(Programme Service name)- The
displayed on the display window.
programme title
ote
Some RDS stations may not choose to include some of
these additional features. If the data required for the
selected mode is not
Window will show
a
PS NONE message.
being transmitted, the Display
PTY NONE, RT NONE, CT NONE,
You may search for a
following these steps:
Press SELECT
specific Programme Type (PTY) by
(or
AV/FUNC.
on
the remote
1 trol) select
Select
station by pressing
2 (-/+) (or TUN.(-/+) the
control).
con-
FM mode.
to
a
desired
TUNING
on
remote
When the RDS transmission is received, the
display shows the program service name (PS) after
3
4
RDS indicator appears.
Press the RDS to select PTY mode.
To search for
PRESET
played
a
different
PTY, press the
while the last PTY in
(-/+)
to scroll
through
use
is still dis-
the list of available PTY
types.
5
When the PTY is
selected, press the TUNING
(-/+) (or TUN.(-/+) on the remote control) within
5
seconds.
The unit will go into an automatic search mode and
attempt to find the next station with acceptable
signal strength
10
that matches the desired PTY
type.
Speaker Setup
Delay
In
Time
Dolby Digital
Center
Setting
or
Dolby
Pro
Logic
mode it is assumed
that the distance from the listener to each of the
ers
is
center
equal.
If not then
or rear
neously by
setting
the
delay
speak-
times of the
the sound will be heard simulta-
speakers
The interval from the
speakers
to the listener. If the dis-
tance from the listener to each
speakers is same, in the
Pro Logic mode the delay time
time
setting
If the distance of DF is
equal
(Dolby Digital
mode
only)
to the distance of DC in
the left
figure, set the Center Delay Time as 0ms.
Otherwise, change the setting according to the informa-
tion below.
Eg)
the listener.
delay
er
If the distance from the front
speakers to the listenspeaker to the listener is
is 3m and from the center
2.4m, the center delay time is 2msec.
Dolby Digital
Dolby
of each speakers is as following.
3m
In
Setting the delay time in the Dolby
Digital and Dolby Pro Logic (II) mode
and
Dolby Digital mode
Center delay time : 0
5ms
Rear delay time: 0
15ms
In Dolby Pro Logic mode
Center delay time : cannot change
If the rear delay time is set in Dolby Digital mode, in the
Dolby Pro Logic mode the delay time will be automatically set.
The delay time is 1 msec per 30 cm.
If the center and rear speakers are further than the front
speakers from the listener, the delay time will be at min~
~
imum.
Surround
delay
time
If the distance of DS is
to
equal
or
=
(A)
L
(DC)
/ 30cm
60cm
=
(A)
2msec
=
Press DELAY.
The current surround
play
window.
You
can
in the
2
Press
3
If
time appears in the dis-
delay
select center
delay time by pressing
Dolby Digital mode only.
/
setting
to
is
change
complete,
the
/
time.
delay
press DELAY.
R
C
DC
ote
than the DF in
=
=
1
2.4m
setting
longer
the left figure, set the Surround Delay Time as 0ms.
Otherwise, change the setting according to the below.
Eg) If the distance from front speakers to the listener is
3 m and from rear speakers from the listener is 1.5 m,
in the Dolby Digital mode the rear delay time is 5 msec.
3m (DF)
1.5m (DS)
1.5m (B)
1.5m (B)
150cm / 30cm
5msec
-
(DF)
60cm (A)
-
DF
You
adjust the center delay time only
and its delay time appears.
can
mode
Center Width (MUSIC
mode of
in the
Dolby
Pro
Dolby Digital
II
Logic
only)
This control allows center-channel sounds to be
posileft/right
tioned between the center
speaker and the
speakers over a range of eight steps. Step "3" uses a
combination of all three front speakers to give the best
vocal imaging and most seamless soundstage presentation, and is recommended for most recordings. Step
"0" places all center sound in the center speaker. Step
"7" places all center sound equally in the left/right
speakers, just as in conventional stereo.
SW
DIMENSE (MUSIC
DS
SL
SR
(B)
mode of
This control allows the
user
Dolby
to
Pro
Logic
II
only)
gradually adjust
soundfield either towards the front
or
the
rear.
the
This
can
be useful to
In
Dolby Pro Logic II (Surround delay time):
Prologic: 15 30msec
~
Movie: 10
Music: 0
Matrix: 0
25msec
~
~
15msec
~
help achieve the desired balance from all
the speakers with certain recordings that may contain
either too much or too little spatial effect. Step "0" is the
recommended setting, which has no effect on the
sound. Steps 1, 2, and 3 gradually move the sound forward, and steps --1, --2, and --3
move
the sound
towards the surrounds.
15msec
PANORAMA (MUSIC
mode of
Dolby
Pro
Logic
II
only)
This control extends the front stereo
image to include
the surround speakers for an exciting "wraparound"
effect with side-wall imaging. It is particularly effective
for recordings which have strong left- or right-channel
elements in the mix, as these are detected and
tuated by the Panorama process.
accen-
11
Mini
for Sound Mode
Glossary
Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources bearing the
trademark such as discs, DVD and compact discs, etc. DTS Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and results in exceptional clarity throughout a true 360
degree sound field.
Technology, LLC.
The
Dolby Digital
The term DTS is
a
trademark of DTS
surround format lets you
If you play DVDs with
"
program source.
cy, and improved
When
dynamic
enjoy
"
Technology,
up to 5.1 channels of
mark, you
can
enjoy
digital
even
surround sound from
better sound
Dolby Digital
quality, greater spatial accuraa
range.
of live music and classic, this mode
playing recordings
LLC. Manufactured under license from DTS
provides
a
feeling
similar to
actually being
in
a
small
concert hall.
When
playing recordings
of live music and classic, this mode
provides
a
feeling
similar to
actually being
in
a
large
con-
cert hall.
This mode
provides
a
three dimensional effect similar to that of movie theater.
(II)
Dolby Pro Logic II creates five full-bandwidth output channels from two-channel sources. This is done using an
advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without
adding any new sounds or tonal colorations.
PROLOGIC mode:
The Pro
the
Logic
Emulation mode offers
users
the
same
robust surround
processing
as
original
Pro
Logic,
in
case
optimum quality, or if there is a desire to hear the program more "as it used to be."
When this mode is used, it is called Pro Logic, as before. There is no "Pro Logic I" mode. The Pro Logic emulation
mode is optional. Dolby does not require PLII products to use the original Pro Logic decoding algorithm. However,
if the DSP contains the original Pro Logic code, and if the product maker would like to use it, this is quite acceptable and even encouraged. A product must not offer both original Pro Logic and the Pro Logic emulation mode.
source
content is not of
MOVIE mode:
The Movie mode is for
with stereo television shows and all programs encoded in Dolby Surround. The result
is enhanced soundfield directionality that approaches the quality of discrete 5.1-channel sound.
use
MUSIC mode:
The Music mode is for
with any stereo music recordings, and provides a wide and deep sound space. The
Music mode includes controls that allow the sound to be tailored to individual listening tastes.
use
MATRIX mode:
The Matrix mode is the
same as
the Music mode
except that the directional enhancement logic is turned off. It
may be used to enhance mono signals by making them seem "larger." The Matrix mode may also find use in auto
systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals
from
a
logic
decoder. The ultimate "cure" for poor FM stereo
SURROUND OFF
reception
may be
simply
to force the audio to
mono.
(2CH STEREO)
Outputs the sound from the front left and right speakers and subwoofer. Standard two channel (stereo) sources
completely bypass the sound field processing. This allows you to play any source using only the front left and right
speakers and subwoofer. You can select SURROUND OFF by pressing BY-PASS on the remote control.
Dynamic Range
Control
(DRC)
With the DVD*1 format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output
(the
12
without
losing clarity
Dolby Digital only
ume
*1:
difference between the loudest sounds and the
of sound. You
can
select
quietest ones). Then, you may
DRC ON or OFF by pressing
listen to
DRC
on
a
movie at
a
lower vol-
the remote control.
Sound
Adjustment
Sound Mode
Test Tone
When PCM indicator
This function allows you can easily adjust the sound
balance of the speakers from the listener's position.
display
only
is
in the
displayed
window:
Each time you press SOUND button, the sound mode
is changed as the following order;
PRO LOGIC
HALL1
→
→
HALL2
→
1
Select the test tone mode
button, the sound mode of Pro
following order;
,
2
PRO LOGIC → MOVIE → MUSIC → MATRIX
ip
select SURROUND OFF
can
pressing
mode
(2CH STEREO)
You
out for 2 seconds from each
3
speak-
adjust
can
the sound level
→
during operating
the test tone, first press LEVEL then press
buttons, so that all speaker's sound level is
from the listener's
/
position.
?
During operating the test tone, if you adjust the sound
level, it will be paused in the current speaker channel.
If
setting
by
BY-PASS button.
comes
in the
same
You
noise
following order;
FL (Front Left) → C (Center) → FR (Front Right)
SR (Surround Right) → SL (Surround Left) →
SW (Subwoofer) → FL (Front Left)
ers
Each time you press
Logic II is changed as the
TEST
TONE.
?Ahiss
THEATER
by pressing
is
press TEST TONE.
complete,
For your reference
?
You
identify the encoding format
software by looking at its packaging.
Dolby Digital discs are labeled with the
Dolby Surround encoded programs are
the
logo.
DTS Digital Surround discs are marked
can
of program
logo.
-
-
-
labeled with
with DTS.
Sleep Timer Setting
You
can
automatically
1
You
can
2
set the sound level of the desired channel.
at
a
specified
System
The SLEEP indicator and
to turn off
time.
Press SLEEP to set the desired
play
Sound Level
set the Surround Sound
sleep
time.
time appears in the dis-
sleep
window.
Each time you press SLEEP the
in the following order.
setting changes
SLEEP180→150→120→90→80→70→60→50→40→
1
2
Press LEVEL.
30→20→10→OFF
The level indicator will appear in the
Press
/
to select
Each time you press the
a
desired
/
display
window.
ote
to set.
speaker
button, it is changed
the
as
following order;
FL
(Front Left) → C (Center) → FR (Front Right) →
SR (Surround Right) → SL (Surround Left) →
SW (Subwoofer) → FL (Front Left)
On the 2 channel stereo mode, you can only select
SW (Subwoofer).
?
Press
/
adjust the
channel. (-6dB
to
the
sound level of the
3
+6dB)
Repeat step
adjust
4
setting
complete,
5
selected
2-3 and
is
the sound level of
press LEVEL.
Window.
Selecting input
source
You
other units connected to the AUX
can use
INPUT(R/L),
DVDs
or
COAXIAL INPUT
or
OPTICAL INPUT
manual
selecting the analog signal
(R/L) Connectors.
example,
con-
supplied with the
unit for further information on the operation.
Press SELECT repeatedly on the front panel or
press AV/FUNC.repeatedly on the remote control to
select the desired input source.
owners
ANALOG: for
Press MUTE to mute your unit.
You can mute your unit in order, for
telephone,
check the time
Each time you press this button, the mode of the function changes in the following sequence:
Mute
the
remaining before the
Surround Sound System turns off.
Press SLEEP. The remaining time appears in the
display window.
can
nector. Refer to the
~
the other channels.
If
You
to
"MUTE" indicator flashes in the
answer
OPTICAL: for
Display
selecting
from AUX INPUT
the
digital signal
from OPTICAL IN
the
digital signal
from COAXIAL IN
Connector.
COAXIAL: for
selecting
Connector.
ote
The
Optical input function is available only when
other unit's Sampling Frequency is 32
48kHz.
the
~
13
Before
Requesting Service
Cause
Symptom
No sound.
Power is not
even
though
Speaker
securely.
cords
are
not connected
?
Connect them
?
Speaker
correctly.
cords
are
not connected
?
Connect them correctly, that is L
L, R (right) to R.
?
The power cord is not
?
Plug
?
The remote control is not
?
supplied
Correction
plugged
in.
securely.
the power cord into
an
(left)
to
AC outlet.
the
POWER button is
pressed
in.
The remote control
does not work
remote
properly.
?
sensor
pointed
at the
of this unit.
The remote control is too far from this
?P oint the remote control at the remote
sensor of this unit.
?
Operate the
23ft(7m).
?
Remove the obstacle.
?
Replace
unit.
?
There is
an
obstacle in the
path
of the
remote control within about
remote control and this unit.
?T he batteries in the remote control
exhausted.
14
are
the batteries with
new ones.
Specification
Power
Power
Refer to the main label
supply
consumption
60W
Mass
10
External dimensions
(W
x
H
x
D)
kg
246
x
430
x
420
Operating conditions
Frequency response (audio)
Signal-to-noise ratio (audio)
Harmonic distortion (audio)
Temperature:
Surround mode
Front:
mm
5°C to 35°C,
Operation
status: Horizontal
120 Hz to 20 kHz
More than 75 dB
1.0 %
(1 kHz, NOP, W/IHF-A & 20 kHz Filter)
(1 kHz, at 12W position) (20 kHz LPF/A Filter)
60W + 60W (THD 10 %)
Center*: 60W
Surround*: 60W
60W
+
Subwoofer*: 120W
FM
AM
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
87.5
-
or
at
65
-
74
MHz, 87.5
-
108.0 MHz
10.7 MHz
60/55 dB
140 -10,000 Hz
522-1611kHzor530-1610kHzor530-1720kHz
450 kHz
37 dB
140
-
25,000 Hz
AUX, COAXIAL, OPTICAL AUDIO
Inputs
Model
Satellite
2
Type
Impedance
Frequency Response
Speaker (LHS-A4400T)
Way 2 Speaker
120
Input Power
Max. Input Power
NetDimensions(WxHxD)
Net Weight
specifications
2
Speaker (LHS-A4400C)
Way 2 Speaker
120
84 dB/W
(1m)
1
(LHS-A4400WA/WD/WX)
Way 1 Speaker
4Ω
20,000 Hz
-
Active Subwoofer
(1m)
40-180Hz
82 dB/W
(1m)
60W
60W
120 W
120 W
120 W
240 W
100x162x120mm
225x102x120mm
246x430x420mm
0.8
are
8Ω
20,000 Hz
-
84 dB/W
Rated
and
Center
8Ω
Sound Pressure Level
Designs
108.0 MHz
(4Ω
kHz, THD 10 %)
250 Hz, THD 10 %)
at 1
(8Ω
subject
to
kg
change
0.9
kg
10
kg
without notice.
15
DR6921NS_NA7BLL_ENG
DVD RECORDER
OWNER'S MANUAL
Before
connecting, operating
adjusting this product,
booklet carefully and completely.
please
read this instruction
or
Ta ble of Contents
INTRODUCTION
DVR HOOKUP
TableofContents......................2-3
DVDRecorderOverview.................4-9
RecordableDiscs.......................4
PlayableDiscs.........................4
Disc-relatedterms......................5
Connections........................13-17
ConnectingtotheAerial.................13
ConnectionstoYourTV..................14
Connecting to a cable box or satellite receiver 15
15
Connecting an external decoder box
ConnectingtoanAmplifier...............16
Accessory Audio/Video (A/V) Connections
.
.
?T
ypesofvideoCDs..................5
AboutSymbols.........................5
?Aboutthesymboldisplay............5
About the disc symbols for instructions
5
?
.
.
.
.
Aboutrecordablediscs...................6
.6
?Whatare'recordingmodes'?.
Is editing a DVD like editing a video tape?
6
About word 'Original' and 'Playlist'.
6
AboutDVDrecording...................7-8
Disc types and recording formats, modes,
andsettings........................7
.7
?RecordingTVaudiochannels.
?Notesforrecording...................7
.8
?Restrictionsonvideorecording.
.
.
.
.
.
.
.
.
.
?
.
.
.
.
.
.
.
toDVDRecorder......................17
ConnectingaDigitalCamcorder.
.
.
.
.
.
.
.
.
.
.17
DVR SETUP
.
?
.
.
.
.
.
.
.
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Pre-operationSetup..................18-29
InitialSettings.........................18
GeneralOperation.....................18
General...........................18-23
?A
utoProgramming..................18
?ProgramEdit....................19-20
?A utoClockSet.....................21
.
?Whatis'CPRM'?....................8
?Copyright..........................8
ResettingtheDVDRecorder...............8
Precautions...........................9
?Handlingtheunit....................9
?Cleaningtheunit....................9
NotesonDiscs.........................9
?Handlingdiscs......................9
?Storingdiscs.......................9
?Cleaningdiscs......................9
FrontPanel............................10
FunctionDisplayWindow................11
RearPanelConnections.................12
?ManualClockSet...................21
?TVAspectRatio....................21
?DisplayMode......................22
?A V1Decoder......................22
?ProgressiveScan...................22
?P B C(On/Off)......................23
?F actorySet.......................23
Language............................23
?DisplayLanguage...................23
?DiscLanguage.....................23
Audio...............................24
?DolbyDigital.......................24
?DTS.............................24
?MPEG...........................24
?SamplingFrequency.................24
.24
DRC(DynamicRangeControl).
?
.
.
.
.
.
.
.
?V ocal............................24
Lock(ParentalControl)...............25-26
?SetPassword......................25
?Rating...........................25
?C ountryCode......................26
Recording.........................26-27
?RecordModeSet...................26
?RecordAspect.....................26
?D VRecordAudio...................26
?A
utoChapter......................27
Disc..............................27-28
?DiscFormat.......................27
?DiscProtect.......................27
?Finalize..........................28
?DiscLabel........................28
Overview for the On-Screen
?
?
2
Display
Displaying Information While Watching
Disc Information On-screen Display
.
.
.
.
.
.
TV
.
.
.
.
.
.
.
.
.
29
29
29
Ta ble of Contents
Recording from External Input source
Recording from External Components
Recording from a Digital Camcorder
PLAYBACK
.30-33
DVDandVideoCDOperation.
DVDorVideoCDPlayback...............30
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
41-42
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
41
41
?D V-RelatedMessages...............42
?TITLESelection....................30
.
.
WhatisDV?..........................42
GeneralFeatures......................30
?CHAPTER/TRACKSelection.
.
?T
.30
roubleshooting....................42
?Search...........................30
?
Still Picture and
Frame-by-Frame Playback
.
30
EDITING
?SlowMotion.......................31
?RepeatTrack/All/Off.................35
.43-47
TitleListandChapterListMenu
Using the Title List-Original menu VR ......43
Using the Chapter List-Original menu VR ...43
Using the Title List-Playlist menu VR ......44
Using the Chapter List-Playlist menu VR ...44
Using the Title List menu Video ...........45
?DeletingaTitle.....................45
Using the Title List menu +RW ............46
Using the Chapter List menu +RW .........46
Using the Title List menu +R ............47
Using the Chapter List menu +R .........47
.48-53
TitleandChapterEditing.
Titles,ChaptersandParts................48
AddingChapterMarkers.................48
ChangingTitleThumbnails...............48
MakingaNewPlaylist...................49
Adding Additional Title/Chapters to the Playlist 49
DeletingaTitle/Chapter.................50
DeletingaPart........................50
NamingaTitle........................51
.51
CombiningTwoChaptersIntoOne.
MovingaPlaylistChapter................52
?Random..........................35
ProtectaTitle.........................52
?Search...........................35
HideaChapter........................53
?Random..........................31
?Repeat..........................31
?RepeatA-B.......................31
?TimeSearch......................31
?Zoom............................32
?MarkerSearch....................32
?R
e
viewing
the Contents of DVD Video
Discs:Menus......................32
?TitleMenu........................32
?DiscMenu........................32
?CameraAngle.....................32
.32
ChangingtheAudioSoundtrack.
?
.
.
.
.
.
.
.
?A udioChannelSelection.............33
?3DSurround......................33
?Subtitles..........................33
?LastConditionMemory..............33
Audio CD and MP3/WMA Operation
34-36
.34
PlayinganAudioCDorMP3/WMAfile.
.34
NotesonMP3/WMARecordings.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?P ause...........................35
?T rackSelection.....................35
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
DivideOneTitleIntoTwo................53
AdditionalInformation...................54
OverwriteRecording....................54
Viewing Title List menu displayed on other
DVDRecordersorPlayers...............54
Playing Your Recordings on Other
.54
DVDPlayers(FinalizingaDisc).
?SlideShow........................37
?StillPicture........................37
?T
.
.
.
?RepeatA-B.......................35
ProgrammedPlayback................36
JPEGFileOperation....................37
ViewingJPEGDisc.....................37
?M
.
.
vingtoanotherFile...............37
orotatepicture...................37
o
.
.
.
.
.
.
.
.
.
.
REFERENCE
RECORDING
55
Language Code and Country Code List
Troubleshooting.....................56-57
Specifications.........................58
.
BasicRecording........................38
.38
BasicRecordingfromTVchannels.
InstantTimerRecording.................38
TimerRecording.....................39-40
40
Reviewing Timer Recording Details
.40
CancelingaTimerRecording.
40
Stopping a Timer Recording in Progress
Timer Recording Troubleshooting
40
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
About the
symbols
.
.
.
.
for instructions
.
Indicates hazards
itself
or
other
likely to cause
material damage.
harm to the unit
Note Indicates special operating features of this unit.
Tip
Indicates
tips
and hints for
making
the task easier.
3
INTRODUC
DVD Recorder Overview
Recordable Discs
DVD-RW
(Digital
These Discs
you finalize
or edit it.
be recorded
can
Recordings can
record again on
DVD+RW
Video Disc
(Digital
These Discs
DVD-R
Playable
be
can
(Digital
These Discs
(Digital
These Discs
(VCD)
(8cm/12cmdisc)
on
(8cm/12cmdisc)
In addition, this unit can play DVD-R/DVD-RW discs;
DVD+R/DVD+RW discs; CD-R/CD-RW/DVD-R/
ReWritable):
on repeatedly.
DVD-RW/DVD+R/DVD+RW discs that contain audio
record
can
Audio CD
it
+
then you
titles, MP3 files, WMA Files,
+
be recorded
Recordable):
only once. After
you finalize a DVD+R, you cannot record
or edit it any more.
on
--
it
--
Notes :
--
--
This Recorder cannot record CD-R
or
CD-RW discs.
--DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD
--
Recorder may not play if the disc is damaged or dirty,
or if there is dirt or condensation on the Recorder's
If you record a disc
if it is recorded in a
cases
in which it
of the
using personal computer,
compatible format, there are
may not play because of the settings
a
even
software used to create the disc.
application
(Check with the software publisher
information.)
--
Depending
The Recommendable DVD discs
for
more
detailed
on
the conditions of the
code of the DVD Recorder and DVDs
This DVD Recorder is
tured for
playback of
software. The region
designed and manufacRegion 2 encoded DVD
code
on
the labels of
type of DVD Recorder
those discs. This unit
can
play only
2
DVD
some
discs indicates which
can
play
DVD discs labeled 2
ALL. If you try to play any other discs, the message
"Incorrect region code. Can't play back" will appear on
or
:
the TV
DVD-R
DVD+R
DVD-RW
DVD+RW
SONY
SONY
SONY
SONY
TDK
TDK
TDK
TDK
Imation
Imation
Imation
Imation
Verbatim
MAXELL
Verbatim
Verbatim
RiDATA
RiDATA
Memorex
RiDATA
Panasonic
Fujifilm
Fujifilm
Fujifilm
LG
Ricoh
LG
Ricoh
Mitsubishi
HP
Mitsubishi
HP
That's
That's
Samsung
Ritek
Pioneer
Philips
Pioneer
Radus
4
JPEG files and SVCD.
recording equipment or the CD-R/RW (or DVD±R/±RW) disc itself,
some CD-R/RW (or DVD±R/±RW) discs cannot be
played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). Doing so may result in malfunctions.
Depending on the recording software & the finalization,
some recorded discs (CD-R/RW or DVD±R/RW) may
not be playable.
Regional
lens.
--
or
Notes :
Video Disc
can
Video CD
-
Video Disc
Recordings can be erased,
again on the same Disc.
DVD+R
can
cannot record
be recorded
can
(8cm/12cmdisc)
Recordable):
recorded only once. After
DVD-R, you
a
DVD
ReWritable):
on repeatedly.
-
be erased, then you
the same Disc.
Video Disc
Discs
Some DVD discs may not have a region
code label even though their playback is prohibited by
area
screen.
limits.
Notes on DVDs and Video CDs
Some
playback operations of DVDs and Video CDs may
be intentionally fixed by software manufacturers. As this
unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available
functions may be added.
Refer also to the instructions
supplied
or
other
with the DVDs
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
DVD Recorder Overview
(Continued)
Disc-related terms
About
Title
About the
(DVD only)
The main film content,
or music album.
Each title is
assigned
locate it easily.
you to
accompanying
symbol display
feature content,
"
a
Symbols
title reference number
enabling
"
may appear on the TV
This icon means the function
manual is not available
on
during operation.
explained in this owner's
that specific disc, or at that
screen
time.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number to
enable you to locate the chapter you want. Depending
on the disc, chapters may not be labeled.
Track
(Video
CD and Audio CD
only)
Sections of a picture or a musical piece on a Video CD
or an Audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Video CD with PBC
(Playback control) functions,
moving pictures and still pictures are divided into sections called "Scenes". Each scene available is displayed
on the Scene menu and assigned a scene number,
enabling you to locate the scene you want.
A scene may be composed of one or several tracks.
a
Types
There
of Video CDs
are
two
types of Video CDs:
Video CDs
PBC
symbols
A section whose title has
applicable only
symbol.
are
Many
dent
for instructions
one
of the
to those discs
following symbols
represented by the
functions
the
on
provided on this Recorder
recording mode. One or more
VR
bols(
Video
,
DVD+R
,
,
DVD+RW
each function
see
at
a
are
depen-
of the sym-
appear by
so that you can
(explained in this manual)
glance whether it's applicable to
)
the disc
loaded.
Scene
On
About the disc
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
with the
system
via menus, search functions,
or
other
typical computer-like operations. Moreover, high resolution still pictures can be played if they are included on
Video
DVD-R/RW with Video
VR
DVD-RW with VR
+R
DVD+R disc
+RW
DVD+RW disc
DVD
DVD-Video disc
VCD
Video CDs
CD
Audio CDs
MP3
MP3 CDs
WMA
WMA CDs
JPEG
JPEG CDs
The finalized DVD disc is
a
recording
recording
mode
mode
DVD-Video disc.
the disc.
Video CDs not
equipped
with PBC
(Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
5
INTRODUC
DVD Recorder Overview
(Continued)
About recordable discs
How
are
DVD+RW mode
recordable discs different?
The essential difference among DVD-R, DVD-RW,
DVD+R and DVD+RW is that DVD-R and DVD+R are
recording +RW
?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players
The edited contents is playable on regular DVD players only after finalizing
Recordings can be edited the title/chapter
?
?
record-once medium, while DVD-RW and DVD+RW
re-recordable/erasable medium. You can re-record/
are
?
DVD-RW and DVD+RW disc
erase a
approximately
1,000 times.
DVD+R mode
Can I
play my recordable discs in a regular DVD
player?
Generally, DVD-R, DVD+R and DVD-RW discs recorded
in Video mode are playable in a regular DVD player, but
they must be 'finalized' first. This process fixes the contents of the disc to make them readable to other DVD
players
DVD-Video discs.
as
DVD-RW discs recorded in VR
are
in
playable
some
players.
Unfinalized DVD+RW discs
DVD
player.This
indicates
capable
of
with Video
What
are
There
are
mode
(Video Recording)
are
playable
in
regular
a
product feature that is
playing DVD-RW discs recorded
Recording format.
a
'recording modes'?
various
recording modes available using this
Recorder. When recording to a DVD-R, DVD+R or
DVD+RW disc, recordings are always in Video mode.
DVD-RW discs can be formatted for VR mode recording
or Video mode recording.
VR mode
VR
recording
?4different picture quality/recording time settings
able (HQ, SQ, LQ, EQ)
Not playable on regular DVD players
Recordings can be extensively edited
avail-
?
?
Video mode
recording Video
?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players (after finalization)
Limited editing features
?
?
Disc
?
?
Note :
DVD-Video Format
(Video mode)
is
a new
format for
recording on DVD-R/RW and DVD+R/RW discs that was
approved by the DVD Forum in 2000. You may therefore
experience problems playing recordable DVD discs in
some players. Symptoms include video artifacts, audio
and/or video dropouts and playback suddenly stopping.
Our company cannot take responsibility for problems
playing discs recorded on this Recorder in other players.
Is
editing
a
DVD like
editing
a
video
tape?
No. When you edit a video tape you need one video
deck to play the original tape and another to record the
edits. With DVD, you edit by making a 'Playlist' of what
to play and when to play it. On playback, the Recorder
plays
the disc
About word
according
to the
'Original'
and
Playlist.
'Playlist'
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
the edited version.
?
Original:
content refers to what's
actually
recorded
?
content refers to the edited version of the
Playlist:
disc
---
how the
Original
content is to be
played.
Recording
DVD-Video
Video format
n/a
Playback only
DVD-RW
Video
Recording
for mat (default)
VR mode
Playback, Recording, Original/Playlist Editing
Video format
Video mode
Playback,
limited
Recording,
limited
Editing
DVD-R
Video format
Video mode
Playback,
limited
Recording,
limited
Editing
DVD+RW
+RW Video format
DVD+RW
Playback,
limited
Recording, Title/Chapter Editing
DVD+R
+R Video format
DVD+R
Playback,
limited
Recording,
6
on
the disc.
Disc format
type
mode
+R
recording
?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players (after finalization)
?A ny edited contents are not be compatible on regular
DVD players. (Hide, chapter combine, added chapter
mark, etc.)
Limited title/chapter editing features.
Functions
limited
Title/Chapter Editing
DVD Recorder Overview
About DVD
(Continued)
Notes for
recording
?
This recorder cannot make
recordings
CD-R
on
This
or
on
CD-RW discs.
?
Our company takes no responsibility for recording failure due to power outages, defective discs, or damage
?
to the Recorder.
?
and small scratches
disc
Fingerprints
playback and/or recording performance.
proper
This recorder
on a
can
affect
can
?
?
five different kinds of DVD discs:
?
DVD-Video discs, DVD-RW, DVD-R,
DVD+RW and DVD+R discs. The disc format for DVD-R
pre-recorded
always
"Video format"---the
ed DVD-Video discs. This
you
can
play
a
DVD-R in
means
a
same as
that
regular
once
pre-record-
finalized,
player.
Video Recording
for DVD-Video, which is not recordable, and
have a recording mode).
so
does not
Within the
recording modes (which are fixed for them
whole disc) are the record settings. These can be
changed as required for each recording and determine
the picture quality and how much space the recording
on
Recording
are
not exact because the
variable bit-rate video
that the exact
the material
being
compression.
recording time will depend
recorded.
When
recording a TV broadcast, if the reception is
or the picture contains interference, the record-
poor
ing times may be shorter.
If you record still pictures
time may be longer.
The displayed times for
add up
always
or
audio
recording
to exactly
only,
the
recording
and time
the
remaining
length of the
The
recording time available may decrease if you
heavily edit a disc.
If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 27 (Disc
Format) for how to do this.
When using a DVD-R disc, you can keep recording
amount of
?
recording time left on the disc.
When using a DVD-RW disc in Video mode, recording
time available will only increase if you erase the last
title recorded
on
?T he Erase Title
the disc.
option
in the Title
List-Original menu
only hides the title, it does not actually erase the title
from the disc and increase the recording time available (except for the last recorded title on a DVD-RW
disc in Video mode).
?O v erwrite recording is available using DVD+RW discs.
the disc.
TV audio channels
This recorder
can
If the NICAM
setting (page 20)
record either NICAM
or
regular
audio.
is set to Auto, then if the
record the NICAM audio.
broadcast is NICAM, you can
If the broadcast is non-NICAM, the
always
times shown
until the disc is full, or until you finalize the disc.
Before you start a recording session, check the
DVD
By default, the DVD-RW disc format is
(VR) format, though you can change this to Video format, if required. (Reinitializing the disc will erase the
contents of the disc.)
The recording mode is closely related to the disc format.
If the disc format is Video Recording format, then the
recording mode is VR mode; if the disc format is Video
mode, then the recording mode is Video mode (except
will take up
?
uses
means
may not
disc.
recording formats, modes,
play
?
Please take
of your discs.
care
Disc types and
and settings
discs is
recording
recorder
Notes :
?
The
recording
regular
audio is
recorded.
7
INTRODUC
DVD Recorder Overview
Restrictions
?Y
?
?
?
on
video
(Continued)
recording
Resetting
copy-protected video using this
recorder. Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-protected
material is encountered during a recording, recording
will pause or stop automatically and an error message
will be displayed on-screen.
Video that is 'copy-once only' can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
below).
NTSC format signals from the analog or the DV inputs
is not recorded correctly with this recorder.
Video signals in SECAM format (from the built-in TV
tuner or from the analog inputs) are recorded in PAL
ou
cannot record
format.
What is 'CPRM'?
CPRM is
protection system (with scramble system) only allowing the recording of 'copy once' broada
copy
cast programs. CPRM stands for Content Protection for
Recordable Media.
This Recorder is CPRM
compatible,
which
means
that
record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM
you
can
recordings
can
only
be made
on
DVD-RW discs format-
ted in VR mode, and CPRM recordings can only be
played on players that are specifically compatible with
CPRM.
Copyright
?
Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the area in which you are making
a copy. Copying of copyright material such as films or
music is unlawful unless permitted by a legal exception or consented to by the rights owner.
?
This
product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only, unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited.
?
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
IN CASE OF 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY
WITH THIS MODEL
DVD RECORDER,
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.
8
625p
the DVD Recorder
If you observe any of the
The unit is
or
following symptoms...
plugged in,
but the power will not turn
off.
The front
panel display
is not
The DVD Recorder is not
...you
on
can
working.
operating normally.
reset the DVD Recorder
as
follows:
Press and hold the POWER button for at least five
seconds. This will force the unit to power off.
Press the POWER button again to turn the unit back
on.
the power cord, wait at least five seconds,
and then plug it in again.
Unplug
DVD Recorder Overview
(Continued)
Precautions
Notes
Handling
the unit
Handling
on
When
shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
Discs
discs
Do not touch the
by
the
edges
so
playback side of the disc. Hold the disc
that fingerprints will not get on the sur-
face. Do not stick paper
or
tape
on
the disc.
INTRODUC
When
setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR,
unit after removing the disc.
or
radio,
or
turn off the
Storing
After
To
keep
Do not
near
the surface clean
use
volatile
such
liquids,
as
the unit. Do not leave rubber
contact with the unit for
leave marks
on
a
insecticide spray,
plastic products in
long period of time. They will
or
discs
playing,
there may be a considerable
increase inside the car.
light,
as
a
use a
the unit
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzine,
lightly
use
thinner,
or
temperature
the surface.
To clean the cabinet
Use
case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
Cleaning
Cleaning
store the disc in its
are
moistened with
a
extremely dirty,
mild detergent
strong solvents such
as
these
as
might damage
discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the center outward.
alcohol,
the surface
of the unit.
Yes
To obtain
clear
picture
The DVD Recorder is a high-tech, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
No
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
vinyl
records.
9
Front Panel
POWER
REC
Switches the DVD Recorder ON
INPUT4
(VIDEO
or
IN/AUDIO IN
OFF.
Starts
(z)
recording. Press repeatedly
to set the recording time.
(Left/Right))
Connect the audio/video
of
external
STOP
output
(Audio system, TV/ Monitor, VCR, Camcorder, etc.).
an
source
Stops playback
or
(x)
recording.
PAUSE
Display
Pause
window
Shows the current status of the
(X)
playback or recording temporarily,
press again to exit pause mode.
DVD Recorder.
PLAY
To
back
play
a
(N)
disc.
INPUT 4
(S-VIDEO IN)
Connect the S-Video output of an
external source (TV/ Monitor, VCR,
Camcorder, etc.).
Opens
or
OPEN/CLOSE
(Z)
closes the disc
tray.
DV INPUT
Power indicator
Connect the DV
up red when
the recorder is in
output of
Lights
digital
a
camcorder.
standby
Disc
Insert
a
mode.
Tray
disc here.
PROG.
(+/-)
through
Scans up or down
memorized channels.
m/.
Go to
beginning
of current
chapter/
Press and hold for two seconds for
a
track
fast
or
to
reverse
previous chapter/track.
search during playback.
>/M
Go to NEXT
Press and hold for two seconds for
a
fast forward search
chapter/track.
during playback.
Remote Sensor
Point the DVD Recorder remote control here.
10
Function
Display Window
Disc
REC The Recorder is
type indicators
Indicates the type of disc loaded.
recording.
Indicates that the recorder is timer
recording
or
that
a
timer
recording is
programmed.
INTRODUC
HQ, SQ, LQ, EQ
Indicates recording mode.
ST
BIL
Indicates
Indicates when
a
stereo broadcast is
TRK
TV
received.
BILINGUAL broadcast
a
is
CHP
being
Indicates current
being
chapter
received.
number.
Indicates current track number.
Indicates when the recorder
is in TV tuner mode.
TITLE
Indicates
current title number
DVD
SVC D
+RW
-
TITLE
TV
TRK
CHP
BIL
ST
HQSQLQEQ
REC
-RW
Character indicators
Indicates clock, total
playing time, elapsed time,
chapter/track number, channel,
title number,
etc.
11
Rear Panel Connections
AERIAL
Connect the aerial to this terminal.
EURO AV 2 DECODER
Connect the audio/video
Set
output of
external
an
(Pay-TV decoder,
source
Top Box, VCR, etc.).
COAXIAL
Connect
(Digital audio out jack)
to digital (coaxial) audio equipment.
COMPONENT VIDEO OUT/PROGRESSIVE SCAN
Connect to
a
TV with Y Pb Pr
VIDEO OUT/AUDIO OUT
Connect to
Pb
Pr)
inputs.
(Left/Right)
TV with video and audio
a
(Y
VIDEO IN 3 / AUDIO IN 3
inputs.
(Left/Right)
Connect the audio/video
output of an external
(Audio system, TV/Monitor, VCR, Camcorder).
Cooling
source
fan
AC Power Cord
Plug
into the power
source.
OPTICAL
Connect
(Digital audio out jack)
to digital (optical) audio equipment.
S-VIDEO OUT
Connect to
a
S-Video
Input
on
TV.
VIDEO OUTPUT Switch
Select either COMPONENT VIDEO OUT
VIDEO terminal
depending
on
EURO AV 1 AUDIO/VIDEO
Connect to
a
TV with SCART
jack.
RF. OUT
Passes the
signal
from the AERIAL to your TV/monitor
Caution
Do not touch the inner
panel. Electrostatic
damage to the unit.
12
pins of the jacks on the rear
discharge may cause permanent
or
RGB
signal
of EURO AV1 AUDIO/
how you connect the DVD Recorder to the TV.
Connections
Connecting
to the Aerial
Remove the aerial cable
from your TV set and
insert it into the aerial socket at the back of the
recorder.
socket
aerial
on
Plug
one
plug
end of the aerial cable into the TV
the DVD recorder and the other end into the
input
socket
on
DVRHOKUP
your TV set.
RF coaxial connection
Connect the RF. OUT
jack
on
the DVD Recorder to the
aerial
input jack on the TV using the 75-ohm Coaxial
Cable supplied (R).The RF. OUT jack passes the signal
through from the AERIAL jack.
Rear of TV
Aerial
SCART INPUT
ANTENNA
INPUT
AUDIO INPUT
L
VIDEO
INPUT
R
R
Rear of DVD Recorder
13
Connections
(Continued)
Connections to Your TV
Tips
your TV and other equipment you wish
to connect, there are various ways you could connect
the recorder. Use only one of the connections
Depending
on
Make
the
described below.
When
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
set the VIDEO OUTPUT switch to COMPONENT.
When
the DVD Recorder is connected
directly to
the TV. Tune the TV to the correct video input channel.
Do not connect the DVD Recorder's AUDIO OUT jack
to the phono in jack (record deck) of your audio sys-
--
sure
tem.
Do not connect your DVD Recorder via your VCR.
The DVD image could be distorted by the copy pro-
--
tection
using
the COMPONENT VIDEO OUT
the SCART
jacks,
set the VIDEO OUT-
jack,
SCART connection
Caution
Make
using
on
PUT switch to RGB.
best connections.
--
of the
following connections, depending
capabilities of your existing equipment.
one
system.
Connect the EURO AV1 AUDIO/VIDEO scart
the DVD Recorder to the
TV
using
the scart cable
in
corresponding
(T).
jack on
jacks on the
Video connection
Connect the VIDEO OUT
the DVD Recorder to
the video in
the video cable
jack
jack on
TV using
the
on
(V).
S-Video connection
Connect the S-VIDEO OUT
to the S-Video in
cable
Rear of TV
SCART INPUT
S-VIDEO
INPUT
COMPONENT VIDEO INPUT
AUDIO INPUT
VIDEO
INPUT
jack
jack
the TV
on
on
the DVD Recorder
using
the S-Video
(S).
Component Video
connection
Connect the COMPONENT VIDEO OUT
Y
Pb
Pr
L
R
jacks on the
DVD Recorder to the corresponding input jacks on the
TV using an Y Pb Pr cable (C).
Progressive Scan (ColorStream Pro)
If your television is
T
S
C
AV
connection
high-definition or "digital ready"
television, you may take advantage of the recorder's
progressive scan output for the highest video resolution
possible. If your TV does not accept the Progressive
Scan format, the picture will appear scrambled if you try
Progressive Scan on the recorder.
a
Connect the COMPONENT VIDEO OUT /
PROGRESSIVE SCAN
corresponding
cable (C).
in
jacks
jacks
on
on
the TV
the recorder to the
using
the Y Pb Pr
Notes :
Set the
Rear of DVD Recorder
Progressive to "On" on the setup menu for
progressive signal, see page 22.
Set the progressive to "Off" by removing any disc
from the unit and close the disc
DISC" is
window. Then press
STOP and hold it for five seconds before releasing it.
displayed
Progressive
scan
video connections
on
the
tray. See that "NO
display
does not work with the
(yellow
VIDEO OUT
analog
jack) or S-
VIDEO connection.
Audio
(Left/Right) Connection
Connect the left and
right
AUDIO OUT
Recorder to the audio left and
IN
the DVD
the TV
(A). Do not connect the DVD
Recorder's AUDIO OUT jack to the phono in jack
(record deck) of your audio system.
using
14
the audio cables
right
jacks of
jacks on
Connections
Connecting
(Continued)
to a cable box or
Connecting
satellite receiver
If you have
decoder,
shown
a
cable
or
decoder box
satellite receiver with
a
built-in
connect it to this recorder and your TV
If you have an external, dedicated decoder box for your
satellite or cable TV system, use the setup described on
as
this page. If you are using a separate decoder
box for your cable/satellite TV, set up following the
instructions on the right.
on
this page you can:
Record any channel by selecting it on the cable
box/satellite tuner.
Using
?
the
setup
on
1
Connect RF cables
as
this page.
1
2
shown.
Use the SCART cable to connect the EURO AV1
AUDIO/VIDEO connector to
SCART AV connector
a
your TV.
This enables you to watch discs.
3
3
a
4
SCART cable to connect the EURO AV2
DECODER connector to
a
SCART AV connector
the aerial
Use
your satellite/cable box.
This enables you to record scrambled TV channels.
on
your cable/satellite tuner.
SCART cable to connect your decoder to
your cable/satellite tuner.
See the manual for your decoder box for more
Use
a
a
SCART cable to connect the EURO AV2
DECODER connector to
a
SCART AV connector
AUDIO/VIDEO connector to
a
SCART AV connector
your TV.
Caution:
Do not connect your decoder box
recorder.
Tip
Information from the decoder
This recorder has
a
'loop through'
function. This feature
allows you to record a TV program from the built-in TV
tuner in this recorder, while watching a satellite or cable
channel. Press TV/DVD to select the TV mode
recording.
during
The TV indicator appears
on
Use the SCART cable to connect the EURO AV1
on
on
input
your satellite/cable box.
on
Use
Connect the cable from the aerial/cable TV outlet to
detailed instructions.
This enables you to watch and record TV channels.
2
external
an
pay TV services), is
is off (in standby).
For timer
only
directly
to this
(for example, relating
to
viewable when this recorder
this recorder,
the satellite/cable box must also be switched on dur-
recording
to work
properly
on
ing recording.
Caution:
Do not connect this recorder
lite receiver
nent
directly
or
cable box.
to your TV
'through' your VCR, satelAlways connect each compo-
or
AV receiver.
Decoder
Aerial/
SCART AV
Cable TV
Wall Jack
Aerial/Cable TV
Wall Jack
Cable Box
AERIAL
INPUT
AERIAL
OUTPUT
or
Satellite Receiver
Cable Box
or
Satellite Receiver
SCART AV1
SCART AV2
AERIAL
INPUT
Rear of DVD Recorder
AERIAL
OUTPUT
SCART AV1
SCART AV2
Rear of DVD Recorder
15
DVRHOKUP
Connections
Connecting
(Continued)
to an
Amplifier
Rear of DVD Recorder
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and
jacks on the
DVD Recorder to the audio left and right in jacks on
your amplifier, receiver, or stereo system, using the
audio cables (A).
Right
AUDIO OUT
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
1
Connect
one
X
A
of the DVD Recorder's DIGITAL
AUDIO OUT
jacks (OPTICAL O or COAXIAL X) to
the corresponding in jack on your amplifier. Use an
optional digital (optical O or coaxial X) audio cable.
COAXIAL
DIGITAL INPUT
You will need to activate the recorder's
2 put. (See
Digital
"Audio"
on
page
digital
out-
Amplifier (Receiver)
23).
Multi-channel sound
A
digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that
supports
one or more
of the
audio formats
supported by your DVD Recorder
(MPEG 2, Dolby Digital and DTS). Check the receiver
manual and the logos on the front of the receiver.
Caution:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
Notes :
--
If the audio format of the
digital output
does not match
the
--
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
--To
see
the audio format of the current DVD in the
on-
press AUDIO.
This recorder does not perform internal
screen
--
O
display,
decoding
of
a
DTS sound track. To
(2 channel)
enjoy DTS
multi channel surround, you must connect this
recorder to a DTS compatible receiver via one of this
recorder's
16
digital
audio
outputs.
L
R
AUDIO INPUT
OPTICAL
DIGITAL INPUT
Connections
Accessory
(Continued)
Audio/Video
(A/V)
Connections to DVD Recorder
Connect the
input jacks (AV3, AV4) on the DVD
Recorder to the audio/video out jacks on your accessory component, using audio/video cables.
Connecting
Using
If you use the S-VIDEO IN jack on the front panel, the
VIDEO IN jack on the front panel is not available.
a
DV
digitally
panel DV IN jack, it is possible to
digital camcorder or DVD-R/RW recorder
transfer DV
tapes
or
DVD-R/RW discs to
DVD-R/RW.
Use
Note :
Digital Camcorder
the front
connect
and
a
a
DV cable
(not supplied)
to connect the DV in/out
of your DV camcorder/video deck to the front
DV IN jack of this recorder.
jack
panel
Note :
Jack
panel of Accessory Component
(VCR, Camcorder, etc.)
This
It is
jack is for connection to DV digital camcorder only.
not compatible with digital satellite tuners or D-VHS
video decks.
S-VIDEO
OUTPUT
AUDIO
OUTPUT
DV
R
Digital
Camcorder
OR
DV
IN/OUT
L
VIDEO
OUTPUT
OR
Rear of
DVD Recorder
Front of
DVD Recorder
Front of DVD Recorder
17
DVRHOKUP
Pre-operation Setup
Initial
In this
General
Settings
system, there
menu
several ways to cusMost menus consist of
Auto
are
tomize the
settings provided.
three levels to set up the options, but some require
greater depth for the variety of settings. If you press
SETUP, only the first and second level of the menu system will appear
on
the TV
B.For
displayed by pressing
you will
see
"B"
on
screen.
the
right
The third level
navigating
side of the
the
can
levels,
menu
menu
be
label to
Programming
This DVD Recorder is
synthesized
tuner
equipped with a frequency
capable of receiving up to 88 TV
channels.
Preparation:
Connect the DVD Recorder to the desired
shown in
Connecting
on
as
page 13.
you go to the next level.
help
Auto
To
to the Aerial
type of aerial,
up and exit the Menu:
Press SETUP to bring up the menu. A second press of
SETUP will take you back to initial screen.
bring
Belgium
Programming
Program Edit
Stop
Clock Set
TV
Aspect Ratio
Display
Searching
Mode
11%
AV1 Decoder
To go to the next level:
Press B on the remote control.
Scan
Progressive
PBC
Factory Setting
To go back to the previous level:
Press b on the remote control.
General
1
Operation
2
1
Press SETUP.
The
Setup
menu
The
Setup
menu
appears.
Use v / V to select the General
While the General
appears.
2
3
4
5
6
While the desired item is
option.
option
is
option.
selected, press
3
Programming
4 option.
5 Country option highlighted.
country
6
highlighted.
begin
7
move
Use v / V to select the desired
move
Press SETUP.
B to
to the second level.
Use v / V to select the Auto
selected, press
B to
to the second level.
Press B to
move
to the third level.
is
Use v / V to select the second desired
option.
Use v / V to select
a
then press B.
"Start" icon is
Press B to
move
to the third level.
Press ENTER/MEMORY to
the channel
search.
Use v / V to select the desired
setting
The tuner will
then
available
press ENTER/MEMORY to confirm your selection.
Some items
7
require
additional
Press SETUP to exit the
in
the tuner's memory.
steps.
Setup
menu.
Note :
After you have connected your DVD recorder for the
very first time. If you press SETUP for initial setting, you
can only set the "Auto Programming" option. Then you
can
18
automatically cycle through all
channels in the area and place them
set the other
options.
Pre-operation Setup (Continued)
Edit
Program
You
can
move,
edit
a
channel
manually (add, delete,
8
Programming
You
Edit
Aspect Ratio
Scan
Factory Setting
2
3
4
Use v / V to select the General
is
option
selected, press
B to
'Program
Edit'
option
from the
C2
1
PAL/SECAM
MFT
Seek Ch.
OK
PAL
0
to the second level.
Use v / V to select the
press B to
move
"Edit" icon is
highlighted.
Program
Edit
option
then
to the third level.
3. See the
5 Program
List
menu
b / B
appears.
PR
Ch.
MFT
Station
01
C12
+10
BBC1
02
C23
0
BBC2
03
C7
0
ITV
04
C27
-10
CH2
05
C17
0
CHTV
06
C33
0
WEST
07
C34
+20
ANGLI
08
C47
0
ABC
09
C10
-60
TV2
Seek: Searches
a
Program
Edit
to the
previous
or
the
setting
Searching stops
at the current
(display only)
station
b / B to select Seek
Move
Select
selectaPRnumberthenpress
ENTER/MEMORY.
appears
automatically. Use
option then press v / V.
when the DVD recorder tunes in
Ch.:
on
the left side of the
Changes the channel number to
select Ch. option then press v / V.
a
then press
option
ENTER/MEMORY to confirm.
Edit: Edits the select-
Program Edit
Program
Station Rename
ed program.
Move
Station Rename: Edits the sta-
Delete
tion
Decoder On/Off
Move: Moves the
Nicam Auto/Off
location
edit. Use b / B
MFT:
Changes the frequency for fine tuning.
Useb/BtoselectMFToptionthenpressv/V.
PAL/SECAM:
an
cursor
PR: Indicates program number
to
Use v / V to select
use
station.
Page Up/Down
Program List options
menu display.
Moves the
(left/right):
(up/down): Changes
cursor position.
11
6Usev/Vto
below to
v / V
10
Close
on
next column.
NICAM
PR-01
descriptions
menu.
Press ENTER/MEMORY.
7
menu.
option.
PR
move
a
options then press ENTER/MEMORY.
Program Edit menu appears.
appears.
While the General
search to select and store TV chan-
2. Use v / V to select
Press SETUP.
menu
List
Program
PBC
Setup
a
program on the Program List
menu then press ENTER/MEMORY.
Program List options appears on the left side of the
AV1 Decoder
Progressive
perform
manually.
1. Use v / V to select
Mode
Display
Program
Edit
can
nels
Clock Set
TV
to exit
menu.
Program
Program Edit
The
List
(O) repeatedly
name,
etc.).
Auto
1
Press RETURN
SECAM).
Changes
Use b / B to
TV
signal system (PAL or
select PAL/SECAM option
then press v / V.
4. Choose OK then press ENTER/MEMORY to confirm
the setting and returns to the Program List menu.
name.
on
program's
the program list.
Delete: Deletes the program
from program list.
Decoder On/Off: Set the
decoder for the program to On
or Off.
Nicam Auto/Off: Set the NICAM
function to for the program Auto
or Off.
19
DVRSETUP
Pre-operation Setup (Continued)
Edit
Program
Sorting
(Continued)
You
Station Rename
You
can name
Names
independently.
can
be up
long.
1. Use v / V to select
program on the Program List
menu then press ENTER/MEMORY.
Program List options appears on the left side of the
Program
List
sort the
manually
program's position
on
the
Program
List
menu.
stations
to 5 characters
can
TV channels
a
menu.
1. Use v / V to select
program on the Program List
menu then press ENTER/MEMORY.
Program List options appears on the left side of the
Program
Program List options then
Keyboard menu appears.
option
from
press ENTER/MEMORY.
menu.
2. Use v / V to select 'Move'
options
2. Use v / V to select 'Station Rename'
List
a
option
from
Program
List
then press ENTER/MEMORY.
3. Use v / V to select
a
desired
position
then press
ENTER/MEMORY to store.
Deleting
a
program
ABC
You
can
delete
Alphabet Capital
123456789
0
ABCDE
J
FGH
I
Program
3.
Enter/memory
to select
a name
Space
Delete
?
for the station. Use vVbB
?
Switches the
keyboard
upper
characters.
Alphabet
case
Small: Switches the
keyboard
to lower
characters.
Symbol:
Switches the
keyboard
to
symbol
charac-
ters.
?
OK: Select to finish.
?
Cancel: Select to exit the
?
?
Inserts
menu.
List
menu.
menu.
option
from
then press ENTER/MEMORY.
is deleted.
options
Setting
Program List
The Program
the Decoder On/Off
1. Use v / V to select the program you wish to link with
the decoder function on the Program List menu then
press ENTER/MEMORY.
Program List options appears
Program
List
the left side of the
menu.
a
List
option
from
options
screen.
position.
b / B: Moves
cursor
to left
or
right.
Setting
the NICAM Auto/Off
This DVD recorder
Remote control buttons for
Numbers
on
then press ENTER/MEMORY. If
you select On, 'Decoder' appears on the menu
Program
Tip
ing
List
a
2. Use v / V to select 'Decoder On/Off'
space at the cursor position.
Delete: Deletes the previous character at the
Space:
cursor
?
Program
a
Alphabet Capital:
case
the
2. Use v / V to select 'Delete'
character then press ENTER/MEMORY to
confirm your selection.
?
on
program on the Program List
menu then press ENTER/MEMORY.
Program List options appears on the left side of the
UVWXYZ
Cancel
program
1. Use v / V to select
KLMNOPQRST
OK
a
(0~9): Enters
location
on
entering
a name
the character of
correspond-
the selected column.
4. Choose 'OK' icon then press ENTER/MEMORY to fix
the name and returns to the Program List menu.
receive Hi-Fi sound transmis-
can
sions in NICAM Stereo. However, if sound distortion
occurs, due to poor reception, you can switch Off
1. Use v / V to select
program on the Program List
menu then press ENTER/MEMORY.
Program List options appears on the left side of the
Program
List
a
menu.
2. Use v / V to select 'Nicam Auto/Off'
from
then press ENTER/MEMORY. If
you select Auto, 'NICAM' appears on the menu
Program
screen.
20
List
option
options
Pre-operation Setup (Continued)
Auto Clock Set
Manual Clock Set
When Channel auto search is
and Date
are
DVD recorder
also set
completed the actual Time
automatically. If the time in the
display
is not correct, the clock must be set
manually.
Auto
1
2
Follow
steps
1-5
Auto
then
Clock Set
Auto
TV
Manual
TV
Manual
Aspect Ratio
Mode
Date
--
/
DVRSETUP
Mode
Date
--
/
--
AV1 Decoder
Year
Scan
Time
----
Progressive
--
:
Year
Scan
PBC
--
Time
----
--
:
--
Factory Setting
3
Press SETUP.
appears.
2
Use v / V to select the General
3
4
5
6
7
While the General
Enter/memory
b / B
menu.
option
is
selected, press
or
B to
option.
(left/right):
Moves the
4
cursor
to the
previous
next column.
(up/down): Changes
cursor position.
to the second level.
Use v / V to select the Clock Set
the necessary information for
date and time.
v / V
move
Aspect Ratio
Display
--
Factory Setting
menu
Set).
Programming
Auto
PBC
Press B to
option
Clock Set
Progressive
move
Clock
Program Edit
AV1 Decoder
Setup
(Auto
press ENTER/MEMORY.
Programming
Display
The
shown left.
Use v / V to select the Manual
Program Edit
1
as
the
setting
at the current
Press ENTER/MEMORY to confirm your setting,
then press SETUP to exit the Setup menu.
to the third level.
Use v / V to select the Auto
option
then press
ENTER/MEMORY.
Press SETUP to exit the
Setup
menu.
Note :
There
where the TV station does not send, or
sends wrong date and/or time information and the DVD
Recorder sets the incorrect time.
If this
are cases
happens,
manually.
we
recommend that you set the clock
21
Pre-operation Setup (Continued)
TV
You
-
-
Aspect
can
AV1 Decoder
Ratio
choose:
We have
4:3:
Select when
a
standard 4:3 TV is connected.
for
16:9:
Select when
a
16:9 wide TV is connected.
of
Auto
already described, how to connect a decoder
pay-TV station on page 15. For viewing or recording
encoded program from EURO AV1 AUDIO/VIDEO
connector, you do not have to control anything. You just
an
select AV1
Programming
by pressing AV/FUNC.
the decoding will start.
source
Program Edit
wait
Clock Set
Choose 'On' if your recorder is connected with
decoder, otherwise leave it set to 'OFF '.
TV
Aspect Ratio
Display
4:3
Mode
16:9
shortly
until
button and
a
AV1 Decoder
Progressive
Scan
Auto
PBC
Programming
Program Edit
Factory Setting
Clock Set
TV
Aspect Ratio
Display
Mode
AV1 Decoder
Display
Progressive
Mode
Scan
OFF
ON
PBC
Factory Setting
Display
Mode
works
setting
only
when the TV
Aspect
Ratio is set to "4:3".
You
-
-
can
choose:
Letter Box:
Pan Scan:
Displays
wide
with bands
the
picture
upper and lower portions of the screen.
Automatically displays the wide picture on
the entire screen and cuts off the portions
a
that do not fit.
Auto
Programming
Program Edit
Aspect Ratio
Display
Mode
AV1 Decoder
Progressive
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT /
PROGRESSIVE SCAN jacks, but are connecting the
DVD Recorder to a standard (analog) television, set
Progressive Scan to OFF.
If you are using the COMPONENT VIDEO OUT jacks
for connection to a TV or monitor that is compatible
with a progressive scan signal, set Progressive Scan
?
?
Clock Set
TV
on
Letter Box
Pan Scan
to ON.
Scan
PBC
Auto
Factory Setting
Programming
Program Edit
Clock Set
TV
Aspect Ratio
Display
Mode
AV1 Decoder
Progressive
Scan
PBC
OFF
ON
Factory Setting
Caution
Once the
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
ON in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that "NO DISC" is displayed
on
the
display
window.
2)
Press STOP and hold it for five seconds before
releasing
it. The video
standard
setting
visible
22
on a
and
output will be restored
to the
picture will once again be
conventional analog TV or monitor.
a
Pre-operation Setup (Continued)
PBC
Language
The PBC
(PBC)
-
ON:
setting
to ON
or
can
be
changed.
Set
Playback
Control
OFF.
Video CDs with PBC
are
played according
to the
PBC.
-
Select
a
language
for the
Setup
menu
and
on-screen
display.
OFF: Video CDs with PBC
as
Display Language
are
played
the
same
way
DVRSETUP
Audio CDs.
English
Deutsch
Auto
Programming
Italiano
Program Edit
Clock Set
Nederlands
TV
Aspect Ratio
Display Mode
AV1 Decoder
Progressive
Scan
PBC
OFF
Factory Setting
ON
Disc
Select
-
Factory Set
If you need to, you can reset the Recorder to all its factory settings. Select ''Set'' icon then press ENTER/MEMORY.
Note :
options can
Country Code)
language for the disc's Menu, Audio,
Original: The original language set for the
a
and Subtitle.
disc is
selected.
-
Some
Language
not be reset.
Auto
(Rating, Password,
Programming
Program Edit
Clock Set
TV
Aspect Ratio
Display
and
Other:
To select another
language,
select Other
then press ENTER/MEMORY. Use the
numbered and ENTER/MEMORY buttons to
option
key-in the corresponding 4-digit number
according to the language code list on page
55. If you a mistake before pressing
ENTER/MEMORY, press b repeatedly to
delete one by one and correct it.
Display Menu
Original
Disc Menu
English
Disc Audio
French
Disc Subtitle
German
Mode
Spanish
AV1 Decoder
Progressive
Italian
Scan
Chinese
PBC
Factory Setting
Polish
Set
Other----
23
Pre-operation Setup (Continued)
Audio
Sampling Frequency
Each DVD disc has
Set the Recorder's
of audio
of audio
variety
output options.
Audio Output according to the type
a
system you
use.
automatically
convert any 96 kHz
signals
to
your system can decode them.
If your Receiver or Amplifier is capable of handling
96 kHz signals, select 96 kHz. If this choice is made,
PCM: Select when connected to
amplifier.
this unit will
48 kHz
Dolby Digital
stereo
If your Receiver or Amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. If this choice is made,
2-channel
a
The DVD Recorder's
digital
digital
audio out-
puts sound in the PCM 2ch format when you play
DVD video disc recorded
on
the
so
this unit will pass each type of
any further processing.
Dolby Digital recording
Dolby Digital
system.
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to a Dolby Digital
MPEG
(or an Amplifier
Dolby Digital decoder).
or
other
equipment
Dolby Digital
PCM
DTS
Bitstream
with
without
a
DTS
decoder
signal through
a
Sampling Freq.
48KHz
DRC
96KHz
Vocal
MPEG
DRC
Sampling Freq.
(Dynamic Range Control)
DRC
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
Vocal
possible,
thanks to
digital
audio
technology. However,
dynamic range of the
you may wish to compress the
audio output (the difference between the loudest sounds
DTS
OFF: If you select "OFF", the DTS
through the DIGITAL OUT jack.
signal
is not
output
and the
listen to
at
of sound. Set
a
quietest ones). Then, you may
lower volume without losing clarity
or
other
equipment
with
a
DTS
movie
DRC to ON for this effect.
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to a DTS decoder (or an
Amplifier
a
Dolby Digital
DTS
decoder).
MPEG
Sampling Freq.
Dolby Digital
DTS
OFF
MPEG
DRC
OFF
Vocal
ON
Bitstream
Sampling Freq.
DRC
Vocal
Vocal
MPEG
Set Vocal to ON
PCM: Select when connected to
stereo
amplifier.
a
2-channel
digital
The DVD Recorder's
puts sound in the PCM
video disc recorded
on
digital audio out2ch format if you play a DVD
the MPEG2 recording system.
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to an MPEG decoder (or
an
Amplifier
or
other
equipment
with
a
MPEG
decoder).
DVD is
playing.
only
when
mix into normal stereo sound.
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
MPEG
PCM
Sampling Freq.
Bitstream
Vocal
24
OFF
ON
DTS
DRC
multi-channel karaoke
The karaoke channels
Vocal
Dolby Digital
a
on
the disc will
Pre-operation Setup (Continued)
Lock
If you
(Parental Control)
If you
your password, to clear the current password, follow the procedure below.
Set Password
Changing
the
code
forget your 4-digit
1. Press SETUP to
code
4-digit
forget
display
the
2. Use the Number buttons to
Set Password
Chang
Rating
Delete
Country
Setup menu.
enter/memory
the
6-digit
number "210499".
New Password
OK
Code
3. Select "Yes" then press ENTER/MEMORY.
The 4-digit password is cleared. Enter/memory
code
a new
shown left.
as
Rating
Movies
DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
on
information that
1
2
Press SETUP.
The
Setup
certain
menu
appears.
Use v / V to select the Lock
3
4
5
6 Enter/memory
move
option
is
selected,
press B to
to the second level.
Press B to
scenes are
rated from
to
prevent
have certain discs
Rating
Country
RY, press
by
b
one
While
a
mistake before
repeatedly
to
pressing ENTER/MEMOdelete password numbers
then correct it.
"Change"
Level 5
Level 4
Level 3
Level 2
Level 1
1
2
Follow steps
is
selected, press
Use v / V to select the
move
Rating option.
to the third level.
as
shown above to the left
has the least
has the most
restrictions.
playback
restrictions.
No limit: If you select No limit, Parental Control is
not active. The disc will play in full.
Level 1 to 8: Some discs contain
scenes
not suit-
able for children. If you set a rating for the Recorder,
all disc scenes with the same rating or lower will be
played. Higher
unless
an
lower
one.
rated
alternate
The alternate
the
If
scene
scene
no
scenes
will not be
is available
must have the
suitable alternate
played
on
same
scene
the disc.
rating
is
or a
found,
playback will stop. You must enter/memory the 4digit password or change the rating level in order
play the disc.
mistake before
then correct it.
6
Eight (8)
ENTER/MEMORY.
Tip
repeatedly
(Set
3
(Set
step
4 Password).
5Selectaratingfrom1to8usingthev/Vbut(1)
playback
a
to
left
the
1-3 as shown above to
tons. One
pressing ENTER/MEMORY,
delete password numbers one by
(Kids)
Password).
Press B to
4-digit password again and
press ENTER/MEMORY to verify when "OK" is
highlighted.
Enter/memory
press b
(Adult)
Level 6
4-digit password using the
numbered buttons to create a personal 4-digit
security password then press ENTER/MEMORY
when "OK" is highlighted.
Enter/memory
a
Level 8
Code
password yet;
4-digit password using the numcreate a personal 4-digit security
If you select "Delete" then press ENTER/MEMORY.
The password is deleted.
If you
No limit
a
Follow
a
scenes.
Level 7
Tip
If you make
with alternate
played
option.
password, then press ENTER/MEMORY.
Enter/memory the 4-digit password again and press
ENTER/MEMORY to verify when "OK" is highlighted.
If you have already entered a password;
Enter/memory a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER/MEMORY when
"OK" is highlighted.
one
to
or
The Parental Control feature allows you
discs from being played by your children or to
to the third level.
move
bered buttons to
9
the disc. These
scenes on
disc
Set Password
If you have not entered
8
complete
Level 1 to 8, and alternatively, more suitable scenes are
available for selection on some discs. Ratings are coun-
option.
Use v / V to select the Set Password
7
to the
try-dependent.
While the Lock
one
applies
6
Press ENTER/MEMORY to confirm your
selection, then press SETUP to exit the
to
rating
menu.
25
DVRSETUP
Pre-operation Setup (Continued)
Country
Code
Enter/memory
dards
were
the list
Recording
the code of
a
country/area
whose stan-
used to rate the DVD video disc,
(See "Country Codes",
page
referring
to
55.).
Record Mode Set
You
picture quality for recording; HQ (High
Quality), SQ (Standard Quality), LQ (Low Quality), EQ
(Extend Quality).
Set Password
can
set the
Rating
Country
1
2
US
Code
Rec Mode Set
HQ
Rec
SQ
Aspect
DV Rec Audio
LQ
Auto
EQ
Chapter
Press SETUP.
The
Setup
menu
appears.
Use v / V to select the Lock
While the Lock
3
4
5
6 Enter/memory
move
option
is
option.
Record
selected, press
B to
to the second level.
Use v / V to select the
Press B to
Country
When
you
Code
option.
in VR mode formatted DVD-RW disc,
set the recording aspect ratio to suit the material
recording
can
you're recording (16:9 widescreen,
Rec
Aspect
DV Rec Audio
If you have not entered
a
bered buttons to
or
4:3
standard).
Rec Mode Set
to the third level.
move
Ratio
Aspect
password yet;
4-digit password using the numcreate a personal 4-digit security
a
password, then press ENTER/MEMORY.
Enter/memory the 4-digit password again and press
ENTER/MEMORY to verify when "OK" is highlighted.
If you have already entered a password;
Enter/memory a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER/MEMORY when
"OK" is highlighted.
Auto
4:3
16:9
Chapter
DV Record Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
port.
Tip
If you
a
mistake before
press b repeatedly to
one then correct it.
pressing ENTER/MEMORY,
delete password numbers one by
7
Select the first character
8
Shift the
9
Press ENTER/MEMORY to confirm your country
code selection, then press SETUP to exit the
using
the v / V
buttons.
second
menu.
26
using B buttons and select
character using v / V buttons.
cursor
Some
digital
camcorders have two stereo tracks for
audio. One is recorded at the time of
shooting;
is for
the other
over-dubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the over-dubbed sound is used.
the
Rec Mode Set
Rec
Aspect
DV Rec Audio
Audio 1
Auto
Audio 2
Chapter
Pre-operation Setup (Continued)
Auto
Chapter
7
When
recording, chapter markers
specified interval. You can set this
10
minutes,
es
automatic
or
put in
are
at the
DVD-RWs, use b / B to select a Disc Format
Mode (Vr Mode or Video Mode) then press
ENTER/MEMORY.
interval to 5 minutes,
15 minutes. If you select None, it switch-
chapter marking off,
For
For
DVD+RWs, go
separations.
no
step
8.
Disc Format
Select
a
Rec Mode Set
Rec
to
DVRSETUP
Mode.
Vr Mode
Video Mode
Aspect
DV Rec Audio
Auto
None
Chapter
5 Min
8
10 Min
15 Min
Use b / B to select "Yes" then press
ENTER/MEMORY.
It takes
a
few moments to format the disc.
Disc Format
All data
on
the disc will be deleted.
Proceed?
Yes
No
Disc
Disc Format
Caution
If you load a completely blank disc, the "Disc Format"
menu will appear. Select "Yes" then press ENTER/MEMORY. The Recorder will initialize the disc.
DVD-R: The Recorder initializes the disc for Video
mode. The
mode will
recording
always
be Video
If you want to change the disc format,
recorded on the disc will be erased.
everything
Disc Protect
mode.
When
DVD-RW: The Recorder initializes the disc for VR
mode.
matted DVD-RW disc, set to ON to prevent accidental
recording, editing or deleting of the disc loaded. If you
DVD+R / DVD+RW: The Recorder initializes the disc.
need to unlock the disc to make edits, select OFF.
Also, you
can
format the disc from the
Setup
recording
in DVD+RW / +R disc
or
VR mode for-
menu as
below.
Disc Format
Finalize
Disc Label
Disc Format
Start
Disc Protect
Finalize
OFF
ON
Disc Label
Disc Protect
1
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the Disc
3
4
5
6
While the Disc
move
option
is
option.
selected, press
B to
to the second level.
Use v / V to select the Disc Format
Press B to
move
"Start" icon is
option.
to the third level.
highlighted.
Press ENTER/MEMORY.
Disc Format
menu
appears.
27
Pre-operation Setup (Continued)
Finalize
Disc Label
Finalizing 'fixes' the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu for
navigating the disc. This is accessed by pressing
Use this to
MENU/LIST
or
TITLE.
enter/memory
a name
for the disc. This
appears when you load the disc and when you
display disc information on-screen.
name
be up to 21 characters long.
?F or discs formatted on a different DVD Recorder, you
will see only a limited number of characters.
?
The disc
name can
Caution
Disc Format
you've finalized a disc recording on a DVD-R,
DVD-RW, or a DVD+R disc, you can't edit or record
anything else on that disc except on a DVD+RW
After
Finalize
Edit
Disc Label
Disc Protect
disc.
Disc Format
Finalize
Finalize
Disc Label
Unfinalize
Disc Protect
Follow
1
Follow
steps
Format).
1
1-3
as
shown
on
page 27
on
page
2
move
"Edit" icon is
option.
to the third level.
highlighted.
Press ENTER/MEMORY.
Press B to
3
4
Finalize is
move
to the third level.
menu
highlighted.
appears.
DVD-RW
Press ENTER/MEMORY.
Finalize
menu
Alphabet Capital
appears.
Finalize
Yes
finalization takes
how much is recorded
titles
on
or more
5
depends
on
the
type of disc,
?
on
Enter/memory
?
to finalize.
Cancel
Delete
Space
a name
for the disc. Use vVbB
a
Alphabet Capital:
case
Alphabet
case
Switches the
keyboard
to
characters.
Small: Switches the
keyboard
to lower
characters.
Symbols:
Switches the
keyboard
to
symbol
char-
acters.
Tip
?
If you load a DVD-RW that has already been finalized,
you can 'unfinalize' it by choosing Unfinalize from the
menu.
After
doing this,
you
can
edit and
OK: Select to finish.
?C ancel: Select to exit the
?
re?
record onto the disc.
?
Inserts
menu.
space at the cursor position.
Delete: Deletes the previous character at the
Space:
cursor
28
I
character then press ENTER/MEMORY to confirm your selection.
to select
upper
?
Finalize
J
OK
the disc, and the number of
the disc. A heavily recorded disc can take up to
8 minutes
ABCDEFGH
No
Note :
long
0
UVWXYZ
Select "Yes" then press ENTER/MEMORY.
The recorder starts finalizing the disc.
How
123456789
KLMNOPQRST
Do you want finalization?
5
shown Disc Format
as
Use v / V to select the Disc Label
3
4 Keyboard
option.
1-3
27.
Press B to
Use v / V to select the Finalize
2
(Disc
steps
a
position.
b / B: Moves
cursor
to left
or
right.
6
Choose OK then press ENTER/MEMORY to
the name and return to the Setup menu.
7
Press SETUP to exit the
menu.
save
Pre-operation Setup (Continued)
Overview for the On-Screen
This manual
Disc Information On-screen
Display
You
operating the
DVD Recorder. Some DVDs require specific operation
or allow only limited operation during playback. When
this occurs, the symbol
appears on the TV screen,
indicating that the operation is not permitted by the DVD
Recorder
or
gives
basic instructions for
is not available
Displaying
on
loaded
1
information
Watching TV
Information While
While
ORY
viewing the TV channels, press ENTER/MEMto display the information displayed on-screen.
on-screen.
Press DISPLAY
2
the disc.
To
received
the
Display, press
DISPLAY repeatedly until it disappears.
See the descriptions on the following pages for
detailed explanations of displays as a disc is
playing.
Recorder Status Icon
Resume
Action
the tuner.
by
repeatedly to display/change
displayed on-screen.
the On-Screen
remove
Indicates channel number, station
name, and audio signal (STEREO,
MONO)
various information about the disc
display
can
Display
play
Displays
from this
prohibited
or
point
not available
PR-06
STEREO
Notes :
ABC
Some discs may not provide all of the features on the
On-Screen Display, examples shown the below.
If
no
button is
Display
01/01/2004
will
pressed
disappear.
for 5 seconds, the On-Screen
13:35
Indicates current date and time.
DVD
Menu
VR
Video
+RW
+R
Function (Use v / V to select desired option)
Options
Title Number
1/6
Chapter
Number
4/26
Shows the current title number and total number of
titles, and skips to the desired title number.
Shows the current
chapters,
Time Search
00:10:30
Audio
Language
(DVD only) and Digital
Audio Output Mode
Subtitle
Language
Angle
D
2CH
OFF
1/3
Sound
NORM
skips
number and total number of
to the desired
chapter
number.
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes
ABC
and
chapter
the
language,
and
Shows the current angle number, total number of
angles, and changes the angle number.
Shows the current sound
changes
b/B,or
Numbers, ENTER/MEMORY
b/B,or
Numbers, ENTER/MEMORY
Numbers, ENTER/MEMORY
b/B
setting.
Shows the current subtitles
changes the setting.
the
Selection Method
mode,
b/B
b/B
and
b/B
setting.
VCD
Menu
Function (Use v / V to select desired option)
Options
Track Number
Shows the current track number and total number of tracks
1/6
Time
Audio Channel
00:10:30
Stereo
Sound
NORM
or
PBC On
mode,
and
skip
to the desired track number.
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Shows the audio channel, and
changes the audio channel.
Shows the current sound
changes
the
mode,
Selection Method
b/B,or
Numbers, ENTER/MEMORY
Numbers, ENTER/MEMORY
b/B
and
b/B
setting.
29
DVRSETUP
DVD and Video CD
DVD
Video CD
or
Operation
General Features
Playback
Playback Setup
Tu rn the TV
on
Note :
and select the video
input
source con-
nected to the DVD Recorder.
Audio
the
1
2
3
Turn the Audio
System:
input source
System
(Z)
to open the disc
Load your chosen disc in the
playback side down.
Press OPEN/CLOSE
READING appears
In
some
on
(Z)
able
on
the
tray.
DVD
If
tray, with the
If
cases, the disc
menu
disc has
another title
playback
might
A
does not
appear
is
displayed
loading
DVD
a
or
If
Use the bBvVbuttons to select the
title/chapter
view, then press ENTER/MEMORY
Press TITLE
or
MENU/LIST to return to the
to start
you
play-
menu
display.
VCD
Use the number buttons to select the track you want
to view.
a
title
on a
Follow the instructions
1. Press SCAN
to return to the
on
each
menu
menu screen.
You may also set PBC to OFF in the
See page 23.
Setup
DVD
Video
2. Press SCAN
If Parental Control is set and the disc is not within the
the
4-digit
code must
be entered and/or the disc must be authorized
page 25).
--DVDs may have a Region Code.
Your recorder will not play discs that have
(see
on
code different from your recorder. The
this Recorder is 2 (two).
3.
region
region code
VR
v / V to select the title
use
a
for
+RW
more
VR
(m
The Recorder will
menu.
Notes :
Rating settings (not authorized),
to
than
+R
one
VCD
chapter/track,
you
to another
Search
(O)
can move
1/6
disc has
display.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Press RETURN
title, you
chapter/track as follows:
Press SKIP (. or >) briefly during playback to
select the next chapter/track or to return to the beginning of the current chapter/track.
Press SKIP (.) twice briefly to step back to the
previous chapter/track.
To go directly to any chapter/track during playback,
press DISPLAY. Then, use v / V to select chapter
icon (or for a Video CD, select track icon). Then,
enter/memory the chapter/track number using the
numbered buttons (0-9) or press b / B.
back.
or
(m
+R
VCD
M) during playback.
DVD
Video
or
M)
SEARCH mode.
to select the
required
speed: mX2, mX4, mX16, mX100 (backward)
or MX2, MX4, MX16, MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
To e xit SEARCH mode, press PLAY (N).
Still Picture and
2.
+RW
enter/memory
Frame-by-Frame Playback
VR
1. Press PAUSE/STEP
30
one
follows:
Video
can move
DVD
"Rating",
than
+R
CHAPTER/TRACK Selection
DVD
may be displayed first after
Video CD that contains a menu.
--
+RW
4/26
menu
want to
VR
more
as
1/6
icon. Then, press the appropriate numbered button
(0-9) or b / B to select a title number.
Tip
a menu
menu.
Press DISPLAY then
tray.
the display window, and
automatically.
PLAY (N).
a
Video
instead.
If
Setup
TITLE Selection
to close the
starts
start, press
and select
connected to the DVD Recorder.
Press OPEN/CLOSE
playback
on
Unless stated otherwise, all operations described use
the Remote Control. Some features may also be avail-
+RW
+R
VCD
(X) on the remote control during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP (X) repeatedly.
To e xit PAUSE mode, press PLAY (N).
DVD and Video CD
General Features
Operation (Continued)
Video CDs
(Continued)
Press REPEAT to select
Slow Motion
?
?
DVD
Video
VR
+RW
+R
VCD
?
desired
repeat mode.
Track:
repeats the current track.
All: repeats the all tracks on the disc.
Off: does not
play repeatedly.
(X) during playback.
The Recorder will enter/memory PAUSE mode.
Press SCAN (m or M) during PAUSE mode.
Video CD with PBC, you must set PBC to OFF in
the Setup menu to use the Repeat function. See page
The DVD Recorder will
23.
3. Use the SCAN
(m
enter/memory
M)
On
SLOW mode.
or
a
to select the
required
speed: t 1/16, t 1/8, t 1/4, or t 1/2 (backward), or T 1/16, T 1/8, T 1/4, or T 1/2 (forward).
With a Video CD, the Slow speed changes: T 1/8,
T 1/4 or T 1/2 (forward).
To e xit Slow Motion mode, press PLAY (N).
4.
a
Note :
1. Press PAUSE/STEP
2.
Repeat Track/All/Off
-
Repeat
DVD
To
Video
repeat
Repeat
playback
in
is not
reverse
possible
with
+RW
sequence in
a
+R
Karaoke DVD
Random
title:
icon and 'A-' appears
the TV
on
during playback.
automatically begins Random Playback
"RANDOM" appears
2. To return to normal
"NORMAL" appears
at your chosen
again
the TV
on
the TV
icon and 'A-B' appears
Time Search
press RANDOM until
playback,
on
screen.
DVD
screen.
on
the TV screen, and the
repeat-
during Random playback, the
title (track) and resumes Random
Video
00:10:30
VR
+RW
+R
The Time Search function allows you to start
at any chosen time on the disc.
1. Press DISPLAY
Display
playback.
appears
during playback.
on
the TV
Note :
playback
The On-Screen
screen.
The Time Search box shows the
elapsed playing
time of the
current disc.
This function
only
works with DVD Karaoke discs
or
2. Within 10
seconds,
use
v / V to select the Time
Video CDs without PBC.
Search icon in the On-Screen
On
The "0:00:00"
Video CD with PBC, you must set PBC to OFF
in the Setup menu to use the Random function. See
a
3. Within 10
page 23.
display
seconds,
enter/memory
the
Display.
appears in the Time Search box.
use
the number buttons to
required
start time.
Enter/memory
left to right in the
hours, minutes, and seconds from
Repeat
box.
Chapter
You
Video
DVD Discs
-
VR
+RW
+R
a
desired
Chapter: repeats
the current
Title:
current title
repeats the
Off: does not
repeat mode.
chapter.
enter/memory an invalid time.
If you enter/memory the wrong numbers,
Then enter/memory the correct numbers.
VCD
Repeat Chapter/Title/Off
Press REPEAT to select
?
ending
and
SKIP >
unit selects another
?
screen.
3. To cancel the sequence, press REPEAT A-B
edly to select Off.
Tip
?
starting point.
repeat sequence begins.
VCD
1. Press RANDOM
DVD
VCD
point.
Repeat
By pressing
a
VR
2. Press REPEAT A-B
Video CDs.
The unit
A-B
1. Press REPEAT A-B at your chosen
Note :
Slow motion
A-B
4
can
not
press CLEAR.
Within 3 seconds, press ENTER/MEMORY to
confirm the start time.
Playback
starts from the selected time
on
the disc.
.
play repeatedly.
31
PLAYBCK
DVD and Video CD
General Features
Operation (Continued)
(Continued)
Discs: Menus
Zoom
DVD
Video
VR
+RW
+R
DVDs may contain menus that allow you to access
special features. To open the disc menu, press
MENU/LIST. Then, press the appropriate number button
VCD
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1. Press ZOOM
during playback
still
or
playback
x2 size
→
x4 size
3. To
display
in
an
highlight
your selection, then press ENTER/MEMORY.
repeatedly
If the current title has
through
move
TV
the
screen.
press CLEAR or press
until the normal picture appears.
playback,
Note :
The Zoom function may not work for
DVDs.
some
You
Video
can
start
+RW
may contain camera
guage and subtitle options, and
playback
from
a
2. To
+R
1.
point. Up
to
these
steps.
2.
Repeat step 1 to enter/memory
points on a disc.
To Recall
1.
the TV
During
or
Clear
disc
a
The Marker Search
2. Within 10
seconds,
screen
briefly.
up to nine Marker
use
will appear
scene.
play
again.
Angle
on
the TV
DVD
1/3
during playback.
The On-Screen
appears on the TV screen.
2. Use v / V to select the Angle icon in the On-Screen
Display.
screen.
Changing
b / B to select the marker
D
DVD
angle
angle.
appears
on
the TV
screen.
the Audio Soundtrack
2CH
Video
VR
+RW
+R
Or, Press CLEAR and the marker
any marker
the marker search menu.
can
the disc menu, press MENU/LIST
The number of the current
number is erased from the list.
4. You
displayed.
3. Use b / B to select the desired
number that you want to recall or clear.
3. Press ENTER/MEMORY and playback starts from
the marked
is
Display
press SEARCH.
menu
angles, spoken lanchapters for the title.
DVD
1. Press DISPLAY
Marked Scene
playback,
may appear.
wish.
memorize.
on
the
If the disc contains sequences recorded from different
camera angles, the angle icon appears briefly on the TV
screen. You can then change the camera angle if you
During disc playback, press MARKER when
playback reaches the spot that you want to
The Marker icon will appear
menu
remove
Camera
nine
To
on
VCD
memorized
points can be memorized.
enter/memory a mark, follow
menu
will appear
1. Press MENU/LIST.
1/9
VR
menu
menu
The disc
Marker Search
menu, the
a
Otherwise, the disc
Disc Menu
DVD
the bBvVbuttons to
use
DVD
Title Menu
2. The
normal
option. Or,
1. Press TITLE.
picture.
resume
ZOOM
the TV
normal size
→
2. Use the bBvVbuttons to
zoomed
changes
to select
to acti-
vate the Zoom function.
Each press of the ZOOM button
the sequence shown below.
the Contents of DVD Video
Reviewing
by inputting
its number
on
Press AUDIO then press b / B repeatedly during playback to hear a different audio language (DVD only) or
audio soundtrack if available.
Note :
Some discs feature both
tracks. There is
no
Dolby Digital and DTS soundanalog audio output when DTS is
selected. To listen to the DTS soundtrack, connect this
Recorder to a DTS decoder via one of the digital out-
puts. See page
32
16 for connection details.
DVD and Video CD
Operation (Continued)
Audio Channel Selection
VCD
Stereo
Press AUDIO then press b / B repeatedly during playback to hear a different audio channel (Stereo, Left or
Right).
3D Surround
DVD
This unit
Video
PLAYBCK
NORM
VR
+RW
+R
VCD
3D Surround effect, which
simulates multi-channel audio playback from two
can
produce
a
conventional stereo
speakers, instead of the five or
more speakers normally required to listen to multichannel audio from a Home Theater System.
1. Press DISPLAY during playback. The On-Screen
Display appears on the TV screen.
2. Use v / V to select the Sound icon in the On-Screen
Display.
3. Press b / B
repeatedly during playback
to select "3D
SUR".
4. To turn off the 3D Surround
Subtitles
DVD
Video
effect, select "NORM".
OFF
ABC
VR
+RW
+R
Press SUBTITLE then press b / B repeatedly during
playback to see the different subtitle languages.
Last Condition
DVD
Video
VR
Memory
+RW
This Recorder memorizes the
user
+R
settings
for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the Recorder or switch
off the Recorder. If you load a disc that had its settings
memorized, the latest stop position is automatically
recalled.
Notes :
--
--
stored in memory for use any time.
This Recorder does not memorize settings for a disc if
Settings
are
you switch off the Recorder before
play the disc.
commencing
to
33
Audio CD and MP3/WMA
Playing
file
Audio CD
an
CD
MP3
The DVD Recorder
recordings
Operation
MP3/WMA
or
WMA
can
Notes
MP3/WMA
MP3 / WMA disc
play
ited
MP3/WMA formatted
?
CD-ROM, CD-R, CD-RW, DVD-R,
on
on
as
Recordings
compatibility
with this
player
is lim-
follows:
within 32
48 kHz (MP3),
Sampling frequency:
32 48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
32
192kbps (WMA)
-
within
-
DVD-RW, DVD+R
or
DVD+RW discs.
?
-
-
Audio CD
?
Once you insert an audio CD
screen. Press v / V to select
PLAY
(N)
a menu
a
appears
track then press
ENTER/MEMORY and
or
on
playback
a
TV
starts.
The recorder cannot read
file extension other than
MP3/WMA file that has
an
".mp3"
/ ".wma".
?
CD-R
?
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is impos-
physical
format should be ISO 9660
sible to
that
1/12
1:10:00
Audio CD
playback MP3 / WMA files. We recommend
you use Easy-CD Creator, which creates an ISO
9660 file
Program
List
?
TRACK1
TRACK2
File
names
must
TRACK3
system.
incorporate
should not
TRACK5
They
TRACK6
"<>letc.
TRACK4
?
TRACK7
?
TRACK8
should have
a
maximum of 8 letters and
.mp3 or .wma extension.
contain special letters such as
an
The total number of files
on
/ ?
*
the disc should be less
than 999.
This DVD recorder
MP3 / WMA
1.
2.
discs and
a
ENTER/MEMORY to
see
Press v / V to select
a
ENTER/MEMORY.
folder, and press
the folder contents.
track then press PLAY
Playback
(N)
starts.
MP3/WMA
List
Program
be
Music Folder 2
Music Folder 3
Music Folder 4
Music Folder 5
Music Folder 6
Music Folder 7
Music Folder 8
Tips
a
file list and want to return to the
Folder list, use the v/V to highlight
and press
ENTER/MEMORY to return to the previous menu
screen.
Pressandholdv/Vtogotothenext/previous
page.
On CDs
files
(or DVDs) with mixed content (MP3/WMA
and JPEG files), you can select between the
MP3/WMA
menu
MP3/WMA
or
highlighted.
and JPEG
JPEG word
on
top
on
34
the
menu
Use b/B to select MP3/WMA
RETURN
AUDIO CD
Press TITLE and
menu.
then press ENTER/MEMORY.
You can view TV channel or video
pressing
or
is
required
from the Internet. Our company has no right to
grant such permission. Permission should always
Music Folder 1
in
permission
in order to download MP3 / WMA files and music
00:00:00
are
to
optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require compatible playback.
Customers should note that
If you
recordings
meet certain technical standards in order to achieve
Press v / V to select
or
requires
input
or
is
JPEG
source
by
If you want to return to the
MP3/WMA menu, press MENU/LIST.
(O).
sought
from the
copyright
owner.
:
Audio CD and MP3/WMA
CD
Pause
MP3
1. Press PAUSE/STEP
Operation (Continued)
Search
WMA
1. Press SCAN
(X) during playback.
2. To return to
PLAY
playback, press
PAUSE/STEP (X) again.
Track Selection
(N)
or
or
press
2. Press SCAN
CD
>
MP3
briefly
or
to
WMA
3. To
Audio CD, to go directly to any track,
enter/memory the track number using the numbered
an
buttons
(0-9) during playback
on
CD
the Track List.
TRACK:
?
ALL
?
OFF
:
WMA
Repeat
To
repeat
CD
Random
to select the
M)
and direction
are
required
(backward) or MX2,
indicated
SEARCH mode, press PLAY
A-B
a
CD
MP3
the
on
menu
(N).
sequence in
a
WMA
track:
1. Press REPEAT A-B at your chosen
The
icon and 'A' appears
a
desired
repeat
does not
MP3
Repeat
and the
mode.
3. To
again
on
the
starting point.
menu screen.
at your chosen
icon and 'A
-
B' appears
on
the
ending
menu
e xit
The
play repeatedly.
screen,
repeat sequence begins.
the sequence and return to normal
REPEAT A-B again.
repeats the current track.
repeats the all tracks on the disc.
(No display):
or
point.
Press REPEAT to select
?
(m
2. Press REPEAT A-B
Track/All/Off
MP3
speed
e xit
Repeat
Repeat
SEARCH mode.
enter/memory
to the pre-
vious track.
On
M) during playback.
display.
to return to the
step back
or
speed: mX2, mX4, mX8
MX4, MX8 (forward).
briefly during
playback to go to the next track
beginning of the current track.
Press SKIP . twice
(m
The Recorder will
Search
Press SKIP .
CD
Repeat
icon
disappears
from the
play,
press
menu screen.
WMA
1. Press RANDOM
during playback or in Stop mode.
The unit automatically begins Random Playback and
"Random" appears on the menu display.
2. To return to normal
repeatedly
display.
until
playback, press RANDOM
"Random" disappears from the
menu
Tip
during
Random
playback,
the
unit selects another track and
resumes
Random
play-
By pressing
SKIP >
back.
35
PLAYBCK
Audio CD and MP3/WMA
Operation (Continued)
Repeat Programmed
Programmed Playback
The program function enables you to store your favorite
tracks from any disc in the player memory. A program
can contain 99 tracks (Audio CD) or 256 tracks
(MP3/WMA).
1.
Insert
a
You
1.
can
2.
Audio CD and MP3/WMA Discs:
2.
3.
Select
Select
"
track
on
?
the List.
"
additional tracks
You
add all tracks in the disc. Select
on
the list.
disc. The
repeat icon
a
desired
repeat mode.
TRACK:
repeats the current track
ALL: repeats all the tracks on programmed list.
Off(No display):
Erasing
1.
Select the track you want to start playing on the
Program list. Press and hold v / V to move to the
previous
a
does not
play repeatedly.
If you press SKIP (>) once during Repeat Track
playback, the repeat playback cancels.
icon then press ENTER/MEMORY.
next /
playing
Note :
place
to place
can
disc.
appears.
icon then press ENTER/MEMORY to
the selected track on the Program list. Repeat
""
4.
a
menu
on a
Press REPEAT to select
?
MP3/WMA
track/all
Press REPEAT when
?
or
a
appears.
disc.
Audio CD
play
Tracks
page.
2.
a
Track from
Program
List
Use vVbBto select the track that you wish to
erase from the Program list.
"
"
Press CLEAR. Or, select
icon then press
ENTER/MEMORY to erase the selected track on the
Program
list.
Repeat
to
erase
additional tracks
the list.
1:10:00
1/12
00:00:00
Audio CD
List
MP3/WMA
Program
List
Program
TRACK1
Track8
TRACK2
Track3
1-Music1
2-Music16
TRACK3
Track12
2-Music2
3-Music5
TRACK4
Track7
3-Music3
4-Music9
TRACK5
Track6
4-Music4
5-Music1
TRACK6
Track9
5-Music5
6-Music7
TRACK7
Track10
6-Music6
7-Music6
TRACK8
Track1
7-Music7
8-Music3
1-Music8
Erasing
Select
"
the
Complete Program
List
", then press ENTER/MEMORY. The
complete Program
for the disc is erased.
Note:
Audio CD Menu
5.
Press PLAY
MP3/WMA Menu
(N) or ENTER/MEMORY to start.
Playback begins in the order in which you
programmed the tracks. Playback stops after all of
the tracks on the Program list have played once.
36
The programs
removed.
are
also cleared when the disc is
on
JPEG File
Viewing
Operation
JPEG Disc
a
Slide Show
this DVD Recorder you can view CD-R/RW,
DVD+R/RW or DVD-R/RW with JPEG files.
Using
Insert
1.
disc and close the
a
appears
the TV
on
tray. The JPEG
JPEG
Use v V b B to
JPEG
highlight
the
on
then press ENTER/MEMORY.
menu
Still Picture
1.
JPEG
Press PAUSE/STEP
The recorder will
JPEG
2.
Preview
JPEG Folder 1
JPEG Folder 2
II
JPEG Folder 3
(Slide Show)
menu
screen.
List
the
during
now
PLAYBCK
slide show.
go into PAUSE mode.
To return to the slide show, press PLAY
press PAUSE/STEP again.
(N)or
JPEG Folder 4
to another File
Moving
JPEG Folder 5
JPEG Folder 6
JPEG
JPEG Folder 7
JPEG Folder 8
Folder
:
JPEG Folder 01/
Press v / V to select
2.
a
folder, then press
appears. If you are in a file list and want to return to
the previous Folder list, use the v / V buttons on the
highlight
to the next
a
Press v / V
picture
ture clockwise
or
(N). Slide Show starts from the
file if Speed option is not II (Off).
While viewing a file, you can press STOP
the previous menu (JPEG menu).
PLAY
limited
There
are
four Slide
(Normal),
Then,
If you
>
Speed options (
(Slow) and II (Off).
highlight
the
with this recorder is
follows:
as
to
the disc's contents. If you don't see an on-screen display after several minutes, some of the files may be
move
to
Depending
too
(Fast),
: >>>
large
---
reduce the resolution of the JPEG files to
pixels
as
2760
x
2048
pixels
and burn
?
are
in
a
).
to
?
Ensure that all the selected files have the
use
file list and want to return to the Folder
sions when
menu
?
Pressandholdv/Vtogotothenext/previous
?
File
be read
On CDs
are
(or DVDs)
and JPEG files),
menu
MP3/WMA
or
lighted.
(MP3/WMA
them
names
page.
with mixed content
into the CD
copying
a
different
".jpg"
exten-
layout.
If the files have
rename
MP3/WMA
the disc
Some discs may be incompatible due to
recording format or the condition of disc.
screen.
files
on
?
the v/V to
use
The total number of files and folders
should be less than 999.
Speed options (
option you want
b / B to select the
use
)
and press
highlight
ENTER/MEMORY to return to the previous
list,
?
counter clockwise.
selected
then press ENTER/MEMORY.
?
pic-
another disc.
Use v V b B to
?
to rotate the
upon the size and number of JPEG files, it
could take a long time for the DVD Recorder to read
?
Tip:
>>
picture
a
compatibility
less than 5M
?
B) once while
or previous file.
or
JPEG
during showing
JPEG disc
If you want to view a particular file, press
v / V to highlight a file then press ENTER/MEMORY
or
viewing
(b
then press ENTER/MEMO-
RY.
3.
cursor
(. or >) or
picture to advance
To rotate
ENTER/MEMORY. A list of files in the folder
remote to
Press SKIP
by
shown
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
".jpg"
extension will not be able to
this DVD Recorder. Even
as
JPEG
image
though
files in Windows
the files
Explorer.
you can select between the
and JPEG menu. Press TITLE and
JPEG word
on
top
on
the
Use b/B to select MP3/WMA
or
menu
is
high-
JPEG then
press ENTER/MEMORY.
?Y
ou can
view TV channel
video
input
source
by
If you want to return to the
JPEG menu, press MENU/LIST.
pressing
RETURN
or
(O).
37
Basic
Basic
Recording
Recording
from TV channels
Follow the instructions below to record
Recording
starts
disc is full
or
Switch
1
on
immediately
stop the recording.
the recorder and load
Also make
a
a
2
input source is set to
completely blank disc,
3
recording mode as necessary by pressing
REC MODE repeatedly. (HQ, SQ, LQ, EQ)
HQ; High Quality, SQ; Standard Quality,
LQ: Low Quality, EQ: Extended Quality
a
can
to select the TV
V) buttons
/
during recorddisplay window.
2
ing. The TV indicator appears in the
Using the TV, select the channel to be
Instant Timer
TV Audio Channel
select the audio channel
AUDIO
to listen
(language)
easily
audio channel is
Stereo
broadcast: Stereo
Right
Bilingual
broadcast: Main+Sub
→
Left
Main
→
→
→
of
Recording
preset length
a
1
Sub
If the sound is of poor quality when set to Stereo, you
can often improve it by changing to Mono (Left or
Follow
from
a
steps 1-4 as shown left (Basic Recording
TV channels).
Press REC
(z) repeatedly to select the recording time length.
Recording starts after the first press. Each
additional press increases the recording time by
10 minutes within the available free space (maximum 120 minutes).
The recording time is displayed on the TV screen.
At the end of the recording, the DVD Recorder will
stop recording and shut off.
Right).
?
This recorder
record either NICAM
can
audio. If the NICAM
or
0:39:59
regular
is set to Auto,
then if the broadcast is NICAM, the audio automatically changes to NICAM and you can record the
setting (page 20)
NICAM audio. If the broadcast is non-NICAM, the regular audio is always recorded.
If NICAM sound distortion occurs, due to poor reception, you can switch off NICAM setting of the program.
4
Press REC
(z)
the disc is full.
Timer
5
a
fixed
Recording
Press STOP
(x)
To Pause the
on
to
length
right.
of time,
see
Instant
Checking
Press REC
remaining
the
(z)
Recording
to check the
once
time will be
displayed
Menu
Time
Recording
To Extend the
The
recording
ing REC (z).
recording
on
the TV
time. The
screen
for
a
stop recording.
time
Time
Recording
can
be extended
anytime by
press-
Each additional press increases the recording time by
10 minutes within the available free space (maximum
120
Recording
minutes).
(X)
If the Recorder is
to pause the disc
during
recording.
while the
lost.
2. When you want to continue
38
Instant Timer
Caution
1. Press PAUSE/STEP
PAUSE/STEP
40M Rec
moment.
once.
Recording will start. (The REC indicator lights in the
display window.)
Recording continues until you press STOP (x) or
To record for
allows you to make a recording
without using the program
timer.
by
The current
or mono
viewed.
Recording
Instant Timer
2
during viewing TV program.
displayed on-screen.
pressing
?
Press TV/DVD to select the TV mode
channel to record.
Changing
You
(v
1
that the TV's
sure
Use CH/PR
TV program while watch-
recordable disc.
this recorder. If you load a
the recorder takes a short while to initialize the disc.
Set
one
another
ing
TV program.
and continues until the
you
To record
(X).
recording,
press
unplugged (or
Recorder is recording,
there is
power failure)
the recording will be
a
Timer
Recording
This DVD Recorder
be
can
programmed
to record up to
7 programs over a period of 1 month. For unattended
recording, the timer needs to be set with the channels to
be recorded, the
1
time and
starting
2
Enter/memory the necessary
your timer recording(s).
?
length.
?
Press TIMER REC.
The Timer Record
?
menu
will appear.
?
Start Time
End Time
Mode
Repeat
VPS/PDC
4
25/7 Sun
19:20
19:50
SQ
Once
Off
PR
?
Timer Record List
TIMER REC
Choose
Date
--
?
End Time
?
Mode
AT
--
--
a
Set the
AT).
(Auto) mode
recording ending
?
will appear.
Check field's "Rec. OK"
indicates that the timer
correctly
(HQ, SQ, LQ,
or
determines how much disc time
neces-
When you set the VPS/PDC
mode is not available.
Repeat
(Monday
Choose
--
a
Friday),
-
VPS/PDC
adjusts
Timer Record List.
and
a
on
the Timer Record List
recording
is
programmed
recordable disc is inserted.
4
Press RETURN
5
Make
(O)
to exit the
Program
List.
that you load a recordable disc and
press POWER to switch your unit to Standby.
sure
Notes :
Note :
?
3
time.
is available and switches record mode, if
sary, to complete recording the program.
?
display
in all the pro-
ENTER/MEMORY, the program will be
memorized by the DVD Recorder.
To check the programming, the Timer Record List
time.
recording starting
record mode
a
gram information.
Press TIMER REC to
filling
Press
date up to 1 month in advance.
Set the
Choose
--
Press ENTER/MEMORY after
Close
a
Choose
Start Time
EQ,
?
memorized program number, or
of the external inputs from which to record.
--
--
119Min Free
Date
one
?
SQ
PR
OK
(left/right) moves the cursor left/right
v / V (up/down)
changes the setting at the current cursor position
Press RETURN (O) to exit the Timer Record
--
menu.
?
Timer Record
b / B
information for
--
desired
or
On, AT
time
?
The timer indicator
the
Recorder is in
the timer active.
?Y
repeat (Once, Daily
Weekly).
The VPS/PDC
the
option
to
system automatically
that
if
recording
program is not running to schedule, you won't miss
it. For VPS/PDC to work properly, you must input
so
even
a
?
lights in
standby with
display
window if the
must press POWER to stop the timer recording.
There is a short delay when a timer recording finishes to
ou
confirm the recorded program. If two timer recordings are
set to record sequentially (one right after the other), the
very
beginning
of the later program may not be recorded.
the correct announced time and date of the program you want to record.
Note that VPS/PDC may not work with every station.
Notes :
?
Stations that
use
VPS/PDC
typically
include
VPS/PDC information in the teletext TV
guide
pages. Please refer to these pages when setting a timer recording.
?
This recorder takes
seconds
to switch
means
on
that when
instances
and
approximately 20
start recording. This
using VPS/PDC, there may be
where the beginning of the program
is not recorded.
39
RECODING
Timer
Recording (Continued)
Timer
Reviewing
Programming
Details
Recording
be checked whenever the DVD
can
Recorder is turned
Press TIMER REC twice.
on.
?
Use v / V to select
?
Press ENTER/MEMORY to edit the selected program.
Timer Record menu appears.
?
Press CLEAR to
a
timer
recording.
the selected program
from the Timer Record List.
remove
Timer Record List
PR
Date
Start Time
Length
Mode
Check
10:20
60
LQ
Rec. OK
51
25/7 (Su)
1:20
50
HQ
Rec. OK
5
17/7
Edit
Canceling
You
can
clear
(Sa)
Delete
CLEAR
Timer
timer
TIMER REC
Timer Record
Close
Recording
setting anytime
before the record-
starts.
ing actually
?
a
a
VPS/PDC
:
Use v / V to select
program you want to remove
the Timer Recorder List. If you want to remove the
program, press CLEAR.
a
on
The confirm message will appear. use b/B to select
"Yes" then press ENTER/MEMORY.
Timer
Stopping
a
After
recording
timer
a
Recording
in
has started, you
Progress
can
still cancel
the program.
Press POWER.
?
Timer
Even
Recording Troubleshooting
though
the timer is set, the Recorder will not
record when:
?
There is
no
disc loaded.
?Anon-recordable
?
disc is loaded.
Disc Protect is set to ON in the
page 27).
?P ower is turned
Setup
menu
(see
?
There
are
DVD+R),
on.
already
49 titles
You cannot
99 titles
(DVD-RW, DVD-R,
(DVD+RW) recorded on the
enter/memory program
for
a
disc.
timer
recording if:
?Arecording is already underway.
The time you're trying to set has already passed.
There are already 7 timer programs set.
?
?
If two
?
?
timer programs overlap:
The earlier program takes priority.
or more
After the earlier program finishes, the later program
starts.
?
If two programs are set to start at exactly the
time, the program entered first takes priority.
If the disc is
same
damaged, the recording may not be
pleted successfully. In this case even though the
field shows "Rec. OK", it may not be.
40
com-
Check
from
Recording
from External
Recording
You
can
record from
camcorder
external
1
or
External
an
Input Source
Components
external A/V device, such as a
VCR, connected to any of the Recorder's
an
You
can
record from
the DV IN
port
digital camcorder connected to
front panel of this Recorder. Using
a
the
on
Digital Camcorder
a
the Recorder's remote, you can control both the
Camcorder and this Recorder.
inputs.
Make
from
Recording
that the component you want to
record from is connected properly to the DVD
sure
Before
DV IN
recording,
port is
make
set up
sure
(see
that the audio
page
input
for the
26).
Recorder. See page 17.
2
Press AV/FUNC.
nal
?T
input
uner:
repeatedly
to select the exter-
to record from.
Built-in tuner
?A V1: EURO AV1 AUDIO VIDEO mounted
?
The
?
Some camcorders cannot be controlled
back
panel
?A V2: EURO AV2 DECODER mounted on back panel
?A V3: AUDIO IN 3 / VIDEO IN 3 mounted on back panel
?A V4: INPUT 4 (VIDEO, AUDIO (L/R), S-VIDEO IN)
mounted on front panel
?D V: DV IN mounted on front panel
on
Tips
a
recordable disc.
3
4 pressing
Select the
recording
REC MODE
mode
as
necessary
by
?
If you connect
5 Recording
Quality
(z)
?Y
ou
ou
Recording
6
on
Press STOP
2
(The
REC indicator
lights
to
from
a
component
port.
DV
a
your Digital Camcorder is connected
to the front panel DV IN port. See page 17.
Check that the DV audio
You
in the
can
the
(x)
or
the
input
choose between Audio 1
is
as
you
require.
(original audio)
and
(over-dubbed audio).
Input is set from the DV Rec Audio in sub-menu
Setup menu. See DV Rec Audio on page 26 for
length
of
time,
see
Instant Timer
stop recording.
3 input.
DV appears in the
4
repeatedly
display
to select the DV
window and
on
the TV
Find the
Camcorder
want to
to start from.
For best
of
information.
Press AV/FUNC.
page 38.
(x)
remotely
one.
sure
more
fixed
DV
a
can't record date and time information from
?D V
disc is full.
a
using
Audio 2
continues until you press STOP
To record for
second DVD Recorder
can't control this unit
Make
display window.)
Recording
a
connected to the DV IN
once.
will start.
this
using
cannot control the second DVD from this
cable, you
1
repeatedly.
HQ; High Quality, SQ; Standard Quality, LQ: Low Quality,
Press REC
must be DVC-SD format.
cassette.
(HQ, SQ, LQ, EQ)
EQ: Extended
signal
Recorder's remote.
?Y
Load
source
place on the
the recording
results, pause playback
Note :
you want to record.
If your source is copy-protected using CopyGuard, you will not
be able to record it using this Recorder. See Copyright on page
8 for more details.
?
Depending
on
your
at the
Camcorder, you
screen.
tape that you
point
from which
can use
Recorder's remote to control the Camcorder
this
using
the
STOP, PLAY and PAUSE functions.
5
Press REC
(z)
once
to start
recording.
automatically stopped if the
Recorder detects no signal.
?Y ou can pause or stop the recording by pressing
PAUSE/STEP (X) or STOP (x). You cannot
?
Recording
is
control the Camcorder from this Remote Control
during recording.
?
?
In Video mode, the final frame of the recording
may remain displayed on screen for a while after
recording stops.
For timer recording to work properly on this
Recorder, the Digital Camcorder must also be
switched on and be operating.
41
RECODING
Recording
from
Input Source (Continued)
External
an
What is DV?
DV-Related
Using DV, also known as i.LINK, you can connect
DV-equipped Camcorder to this Recorder using a
DV cable for
control
input
signals.
and
single
output of audio, video, data and
The i.LINK interface is also known
"i.LINK" and the "i.LINK"
?
a
as
IEEE 1394-1995.
trademarks.
logo
This Recorder is only compatible with DV-format
(DVC-SD) camcorders. Digital Satellite Tuners, PCs,
and D-VHS Video Recorders are not compatible.
?Y
ou
cannot connect
are
more
than
one
DV camcorder at
?Y
ou
cannot control this Recorder from external
ment connected via the DV IN
port (including
equip-
two
your TV
on
Not connected to Camcorder
The Camcorder is not connected
properly,
or
the
Camcorder is switched off.
Too many devices connected
The DV IN port on this Recorder
just
one
supports connection
to
Camcorder.
It
Recorders).
may not be possible
to
always
ed Camcorder via the DV IN
Digital
Camcorders
stereo
16-bit/48kHz,
can
or
There is
no
tape
cassette loaded into the connected
equip-
control the connect-
Uncontrollable device
port.
usually
Check the
ment.
DVD
?
You may see the following messages appear
screen when using the DV IN port.
time to this Recorder.
a
?
Messages
record audio
This Recorder cannot control the Camcorder.
as
twin stereo tracks of 12-
bit/32kHz. This Recorder
can
only
record
audio track. Set DV Rec Audio to Audio 1
one
or
stereo
Audio 2
required (see page 26).
?A udio input to the DV IN port should be 32 or 48kHz
(not 44.1kHz).
Picture disturbance on the recording may occur if the
source component pauses playback or plays an
Updating
Information
Camcorder is
information for DV.
updating
as
Camera mode
Camcorder is set to
camera
mode.
?
unrecorded section of
source
component,
or
if the power fails in the
the DV cable becomes discon-
tape,
Troubleshooting
or
nected.
If you can't get a picture and/or audio
port, check the bullet points:
?
?
Although DV Rec Audio is set to Audio 2 and Audio
signal is not present, DV Rec Audio will be reset to
Audio 1 automatically.
2
Make
sure
through
the DV IN
the DV cable is
?T ry
properly connected.
connected equipment then
switching off the
switching back on.
?T ry switching the audio input.
Note :
the connected Camcorder, you may not
be able to control it using the Remote Control supplied
Depending
on
with this Recorder.
42
Title List and
the Title
Using
The Title
List Menu
Chapter
List-Original
VR
menu
is where you build and edit your
and where you can delete titles and make other
List-Original
Playlist,
changes to the Original content of the disc. You can also
play individual titles directly from the Title List-Original
menu.
The Recorder must be in
using
1
the Title
Original
?
o
the Title List-
display
Use the v / V buttons to
?T
exit the Title
RETURN
2
display
are more
the
display Title List-Original
Use vVbBto choose the title you want to
view the Chapter List-Original menu then press
ENTER/MEMORY.
List-Original options
on
appears
the left side of
menu.
Use v / V to select
3 Original options
previous/
VR
menu
menu.
Title
from Title List-
'Chapter'
then press ENTER/MEMORY.
List-Original menu appears on the TV
Chapter
than 6 titles.
List-Original
Chapter List-Original
Press MENU/LIST to
the
menu.
next page if there
1
mode in order to edit
Stop
List-Original.
Press MENU/LIST to
Using
the
screen.
menu, press
(O).
Chapter List
Title 1
06/27
Original
Sun
0:30:16
1/9
1/12
Title List
Original
DVD-VR
TITLE 1
EQ
1:54:55
7/12
TITLE 2
0:16:00
9/12
TITLE 3
0:35:00
10/12
0:30:00
Free
Select
TITLE 4
13/12
TITLE 5
0:08:00
Select
2
To view Title
Info
LIST
0:15:00
19/12
List-Original options,
select the
menu.
Use v / V to select
an
option
then press
Play
Starts
playback
for the
Moves to
Chapter:
Chapter
List-Original menu of the title.
(refer to right on this page)
Delete
Edit
Delete: Deletes the title.
Playlist
?
a
selected
Title
playback
chapter.
of the
Title: Moves to Title List-
Original
(refer to
Edit
menu
left
of the
on
this
chapter.
page)
Delete: Deletes the
Playlist
chapter.
(page 50)
Edit: Selects Edit
?
options.
Combine: Combines two
into
one.
(page 51)
Playlist: Adds the chapter
Playlist. (page 49)
to the
part
Adds the title to the
Playlist:
Playlist. (page 49)
4 List-Original
then press
Starts
chapters
(page 50)
(O) repeatedly
option
Play:
options.
Delete Parts: Deletes
an
ENTER/MEMORY to confirm.
(page 51)
of the Title.
Press RETURN
Use v / V to select
Title Name: Edits the title
name.
Delete Part
5
select the
menu.
Combine
Edit: Selects Edit
?
side of the
(page
50)
Title Name
Chapter
want then press ENTER/MEMORY.
List-Original options appears on the left
Delete
selected title.
Chapter
Chapter List-Original options,
Play
ENTER/MEMORY to confirm.
Play:
To view
4 chapter you
Close
Playlist
title you want then press ENTER/MEMORY.
Title List-Original options appears on the left side of
the
3
DISPLAY
Close
Playlist
TITLE 6
0:10:00
16/12
LIST
Press RETURN
6 List-Original
(O) repeatedly
to exit
Chapter
menu.
to exit the Title
menu.
Tip
Press DISPLAY to show
more
detailed title information
for selected title.
43
EDITNG
Title List and
Using
1
the Title
repeatedly
To
e xit
the Title
the Title
the
Using
Chapter List-Playlist
Press MENU/LIST
repeatedly
to
VR
Menu
display
the Title
1 List-Playlist
vVbBto
the title you
2
then press
Chapter List-Playlist
menu.
next page if there
?
display
menu.
Use the v / V buttons to
?
to
(Continued)
VR
Menu
List-Playlist
Press MENU/LIST
List-Playlist
List Menu
Chapter
display
previous/
than 6 titles.
are more
List-Playlist,
the
Use
want to
view
press RETURN
menu
ENTER/MEMORY.
(O).
Title
the
1/12
Title List
choose
List-Playlist options
appears
on
the left side of
menu.
Playlist
Use v / V to select
TITLE 1
TITLE 2
0:16:00
7/12
0:35:00
9/12
3 Playlist options
TITLE 3
0:30:00
10/12
Chapter
from Title List-
'Chapter'
then press ENTER/MEMORY.
List-Playlist menu appears on the TV
screen.
TITLE 4
13/12
TITLE 5
0:08:00
16/12
Select
LIST
TITLE 6
0:10:00
19/12
0:15:00
Chapter List
Close
Original
Title 1
6/27
Playlist
Sun
0:25:45
1/9
2
To view Title
3
Use v / V to select
List-Playlist options,
select the title
you want then press ENTER/MEMORY.
Title List-Playlist options appears on the left side of
the menu.
an
option
then press
Select
LIST
Close
Original
ENTER/MEMORY to confirm.
Play:
Starts
playback
selected title.
Chapter
Chapter: Moves to Chapter
List-Playlist menu of the title.
(refer to right on this page)
Edit
Chapter
want then press ENTER/MEMORY.
List-Playlist options appears on the left
side of the
List-Playlist
menu.
(page
50)
5
Use v / V to select
Title Name
?
Title Name: Edits the title
name.
Delete Part
?
(page 51)
Delete Part: Deletes
the Title.
Press RETURN
options.
Play
Delete
Delete: Deletes the
chapter from
the Chapter List-Playlist menu.
(page 50)
Edit: Selects Edit
?
Press DISPLAY to
Combine
more
?M
for selected title.
Press RETURN
44
into
one.
ove:
Moves
(page 51)
chapter of
Chapter List-Playlist menu to
position on the menu. (page
52)
detailed title information
6 List-Playlist
options.
Combine: Combines two
chapters
Move
display
of the
List-Playlist
menu of the chapter. (refer to
left on this page)
to exit Title List-
Tip
playback
chapter.
Title: Moves to Title
part of
menu.
then press
Starts
selected
(page 50)
(O) repeatedly
option
Play:
Edit
a
an
ENTER/MEMORY to confirm.
Title
Edit: Selects Edit
select the
menu.
Delete: Deletes the title from the
Title
4 Playlist
Chapter List-Playlist options,
4 chapter you
the
Play
Delete
To view
(O) repeatedly
menu.
a
to exit
Chapter
a
Title List and
the Title List
Using
From the Title List
List Menu
Chapter
display
Video
menu
can
you
(Continued)
play,
Deleting
name, and
delete titles.
After
Before
Video
on
disc is finalized, you
the disc.
Video mode disc is finalized, the Title List screen
changes its appearance and all you can do is select
a
can
delete titles recorded
a
titles to
1
Title
a
play.
Press MENU/LIST to
display
Caution
?
If you delete a title from a DVD-R disc, the title will
disappear from the Title List, but the available recording time will not increase.
?
When
the Title List.
1/12
Title List
deleting a title from a DVD-RW disc, the
remaining time available for recording will only
increase if it is the last title
on
the disc.
DVD-RW
Title 1
HQ
1:05:43
Title 2
7/12
0:16:00
Title
9/12
0:35:00
10/12
3
1
0:30:00
Free
Title 4
Title
13/12
0:08:00
Select
5
16/12
0:10:00
DISPLAY
2
Title 6
19/12
Info
0:15:00
Close
Press MENU/LIST to
Use vVbBto choose
ENTER/MEMORY.
Title List
List
3
options
display.
appears
Use v / V to select
an
the left side of the Title
on
option
Play:
Starts
Use v / V to select 'Delete' then press
ENTER/MEMORY to confirm.
The confirm message for
deleting
will appear.
Play
then press
Delete
playback
of the
Edit
selected title.
Delete
Delete: Deletes the title from the
Edit
Title List.
Edit: Selects Edit
?
Title Name
options.
4
chapter or title is deleted.
After pressing ENTER/MEMORY, the new, updated
menu is displayed.
(page 51)
(O) repeatedly
to exit Title List.
Tip
display
more
detailed title information
Use b / B to select 'Yes' then press
ENTER/MEMORY.
The selected
Title Name: Edits the title
name.
Press RETURN
Press DISPLAY to
a
menu.
ENTER/MEMORY to confirm.
Play
4
3
List
title you want to
delete then press ENTER/MEMORY.
Title List options appears on the left side of the Title
List
2Usev/Vtochooseatitlethenpress
display Title
Repeat steps
5 the Title List.
6
2-3 to delete additional titles from
Press RETURN
Title List
(O) repeatedly
display.
to
remove
the
for selected title.
45
EDITNG
Title List and
Using
List Menu
Chapter
the Title List
(Continued)
Tip
+RW
menu
Press DISPLAY to
The Title List is where you can see the all recorded
titles, and where you can delete titles and make other
changes to the Original content of the disc. You can also
play titles directly from the Title List menu.
The Recorder must be in Stop mode in order to edit
using the Title List menu.
1
?
Use the v / V buttons to
next page if there
?T
o
the Title List
display
display
the
Caution
If you press REC (z) after the Title List menu
appears, the selected title is erased then overwrite
previous/
exit the Title List menu, press RETURN
(O).
Using
1
2
1/12
Title List
Original
Title 1
1:07:16
54 for
(See page
more
details.)
the
List
Chapter
Press MENU/LIST to
+RW
menu
display Title
List
menu.
Use vVbBto choose the title you want to
view Chapter List menu then press
ENTER/MEMORY.
DVD+RW
HQ
starts.
menu.
than 6 titles.
are more
detailed title information
more
for selected title.
recording
Press MENU/LIST to
display
7/12
Title 2
0:16:00
9/12
Title 3
0:35:00
10/12
Title List
0:30:00
Free
options
the left side of the
on
appears
menu.
Title 4
13/12
Select
Title 5
0:08:00
DISPLAY
0:10:00
16/12
Info
Use v / V to select
3 options
Title 6
19/12
REC
0:15:00
Close
Chapter
2
options, select the title you
want then press ENTER/MEMORY.
Title List options appears on the left side of the
from Title List
then press ENTER/MEMORY.
List menu appears on the TV screen.
Capter List
To view Title List
'Chapter'
Title 1
06/16
Original
Wed
0:30:56
1/9
menu.
3
Use v / V to select
an
then press
option
ENTER/MEMORY to confirm.
Play:
Play
Full
Starts
playback
selected title
Play
Chapter
Delete
Protect
Edit
of the
To view
Play:
Starts
the selected title
hidden
menu
Moves to
Chapter List
(refer to right
of the title.
this
on
playback of
including the
page)
Delete: Deletes the title.
Title Name
Divide
(page 50)
Protect: Protects
Edit: Selects Edit
?
menu.
46
Chapter
Divide: Divides
5
Use v / V to select
an
option
Play
Play:
Title
selected
chapter
Edit
Combine
playback
chapter.
Press RETURN
menu.
chapter. (refer
page)
Edit: Selects Edit
?
Hide
List
Starts
of the
this
6
then press
of the
Title: Moves to Title List
title into
to exit Title List
select the
ENTER/MEMORY to confirm.
?
one
options,
menu.
(page 53)
(O) repeatedly
List
want then press ENTER/MEMORY.
Chapter List options appears on the left side of the
(page 51)
two titles.
4
options.
Title Name: Edits the title
name.
Press RETURN
acci-
against
dental recording, editing, or
deleting of the title. (page 52)
?
4 you
chapters.
Chapter:
Close
except the hidden
chapters.
Full
Select
menu
to left
on
options.
Combine: Combines two
chapters into one. (page 51)
Hide (Show): Hides (or
Shows) the selected chapter.
(page 53)
(O) repeatedly
to exit
Chapter
Title List and
the Title List
Using
List Menu
Chapter
(Continued)
+R
menu
Using
The Title List is where you can see the all recorded
titles, and where you can delete titles and make other
changes to the Original content of the disc. You can also
play titles directly from the Title List menu.
The Recorder must be in Stop mode in order to edit
using the Title List menu.
Press MENU/LIST to
1
the Title List
display
the
Chapter
Press MENU/LIST to
1
2
Use the v / V buttons to
next page if there
?T
display
are more
the
than 6 titles.
exit the Title List menu, press RETURN
o
Title List
options
List
menu.
the left side of the
on
appear
menu.
3 options
Chapter
from the Title List
'Chapter'
then press ENTER/MEMORY.
List menu appears on the TV screen.
(O).
Capter List
Title 1
06/16
Original
1/6
Title List
display Title
ENTER/MEMORY.
menu.
previous/
+R
menu
Use vVbBto choose the title you want to
view the Chapter List menu then press
Use v / V to select
?
List
Wed
0:30:56
Original
1/9
DVD+R
Title 1
HQ
0:50:36
Title 2
7/12
0:16:00
Title 3
9/12
0:35:00
10/12
0:30:00
Free
Title 4
Title 5
13/12
0:08:00
16/12
Select
2
To view Title List
0:10:00
DISPLAY
-/-
-
-
Title
0:38:00
Info
options,
Use v / V to select
an
option
Full
To view
4 you
Starts
playback
selected title
Play
except
Chapter
the hidden
Use v / V to select
Chapter
Play:
Starts
the selected title
Delete
hidden
Protect
Edit
on
of the title.
this
List
Chapter
(refer to right
Title
Edit
left
Hide
?
page)
against accidental recording, editing, or
deleting of the title. (page 52)
Edit: Selects Edit
?
on
of the
this
chapter. (refer
page)
to
options.
Combine: Combines two
chapters into one. (page 51)
Hide (Show): Hides (or
Shows) the selected chapter.
(page 53)
(O) repeatedly
to exit
Chapter
menu.
options.
(page 51)
Divide: Not available
(DVD+RW
Press RETURN
Press RETURN
List
of the
Title Name: Edits the title
name.
?
6
playback
chapter.
Edit: Selects Edit
?
Protect: Protects
then press
Starts
menu
(page 50)
Divide
chapter
Title: Moves to the Title List
Delete: Deletes the title.
Title Name
option
selected
Combine
Moves to
an
Play:
the
chapters.
Chapter:
menu
playback
including
of
select the
ENTER/MEMORY to confirm.
chapters.
Full
options,
menu.
Play
of the
List
want then press ENTER/MEMORY.
Chapter List options appear on the left side of the
5
then press
ENTER/MEMORY to confirm.
Play:
Close
Close
menu.
Play
4
Select
select the title you
want then press ENTER/MEMORY.
Title List options appears on the left side of the Title
List
3
Empty
disc
(O) repeatedly
only)
to exit Title List
menu.
Tip
Press DISPLAY to
display
more
detailed title information
for selected title.
47
EDITNG
Title and
Chapter Editing
Edits you make to the Original content change the actual content of the disc. For example, if you delete a title
chapter
or
that title
from the
Original
content
(Title
Chapter),
disc, freeing up
or
chapter is deleted from the
extra recording time.
When you edit the Playlist, on the other hand, you are
not changing the content of the disc. For example, when
you delete a title from the Playlist, you are just telling
the Recorder not to play that title; nothing is actually
or
Titles in the disc's
and Parts
original
VR
content contain
one or more
chapters. When you insert a title into the Playlist, all the
chapters within that title also appear. In other words,
chapters in the Playlist behave exactly as chapters on a
DVD-Video disc do. Parts are sections of Original or
Playlist titles. From the Original and Playlist menu, you
can add or delete parts. Adding a chapter or title to the
Playlist creates a new title made up of a section (ie.,
chapter) of an Original title. Deleting a part removes
part of a title from the Original or Playlist menu.
Caution
?
?
When
VR
You
+RW
the Delete, Add, or Move functions, the start and end frames may not be exactly as
set in the starting and ending points display.
editing using
you may notice a momentary
pause between edits. This is not a malfunction.
During Playlist playback,
Markers
Chapter
+R
chapter marker anywhere in a Playlist or
Original title during playback.
Once the chapter is marked, you can use the Chapter
put
can
a
Search feature,
chapters in the
Playlist
deleted from the disc.
Titles, Chapters,
Adding Chapter
well
as
as
delete, combine and
Chapter List-Original
or
Chapter
move
List-
menu.
Note :
Chapter markers are inserted at regular intervals automatically. You can change this interval from the Initial
Setup menu (see Auto Chapter on page 27).
1
2
the title
Play
At the
(Original
or
Playlist).
you want to start
press CHP ADD.
A
point
a new
chapter,
marker icon appears on the TV screen.
can also put chapter markers in while recording.
chapter
?Y
ou
Changing
VR
Title Thumbnails
+RW
Thumbnail
+R
Each title
displayed in the Title List menu is represented
by a thumbnail picture taken from the start of that title or
chapter.
If you prefer, select a different still picture from within a
title.
1
the title
Play
(Original
or
Playlist).
Press THUMBNAIL to make the
2 played picture
Original
The still
or
the
Playlist
one
currently
dis-
that appears in the
menu.
picture that you choose
Original or Playlist menu.
appears in both the
Tip
You
change the thumbnail picture of the title on
the Chapter List-Original or Chapter List-Playlist menu.
Select a chapter on the Chapter List-Original or Chapter
List-Playlist menu, then press THUMBNAIL. The thumbnail picture of the title that includes the chapter is
changed.
48
can
also
Title and
Making
Chapter Editing (Continued)
New
a
VR
Playlist
Use this function to add
an
Original
title
or
chapter
to
the
Playlist. When you do this, the whole title is put into
the Playlist (you can delete bits you don't need later
see Deleting a Title/Chapter on page 50).
Adding
Playlist
Additional
You
Original title or chapter
already registered.
---
The title appears in the Playlist complete with the chapter markers that appeared on the Original. However, if
even
1
if it is
an
Press MENU/LIST
Title
to the
VR
add
can
Title/Chapters
List-Original
repeatedly
to
to
a
title
Playlist
display
menu.
If you want to show the Chapter List-Original menu,
refer to "Using the Chapter List-Original" on page
you add more chapter markers to the Original later,
these are not automatically copied over into the Playlist
43.
title.
You
add up to 999 chapters to one disc If you
want to add a chapter of a title, use the Adding a
can
.
title/chapter
1
Playlist
Press MENU/LIST
on
2
this page.
repeatedly
to
display
List-Original menu.
If you want to display the Chapter List-Original
menu, refer to "Using the Chapter List-Original
page 43.
on
Choose
chapter on the Original menu to
put into the Playlist, then press ENTER/MEMORY.
Original (Title or Chapter) options appear on the left
side of the Original menu.
a
title
an
Original
or
Play
Chapter
Title
Play
Play
Chapter
Title
Delete
Delete
Edit
Edit
Playlist
Playlist
Title
List-Original
to
put into
of the
Chapter List-Original
3 options
'Playlist'
from
Original
menu
then press ENTER/MEMORY.
Delete
New
Edit
Edit
chapter
Playlist, then press ENTER/MEMORY.
Original menu options appear on the left side
Select
Delete
or
the
Use v / V to select
Play
title
screen.
Title
menu"
2
to the
only
Choose
a
Playlist
Playlist
TITLE 1
Playlist
Playlist
Title
List-Original
Use v / V to select
3 options
TITLE 2
Chapter List-Original
'Playlist'
from
Original
Choose
then press ENTER/MEMORY.
Select
a
4 tered
to insert
4
Select 'New
Playlist
Playlist'
List-Playlist that is already regisa title or chapter, then press
ENTER/MEMORY.
Playlist
The title
New
Title
a
or
chapter
appears in the
updated Playlist
menu.
5
Repeat steps 1-4 to
ter on the Playlist.
6
Press RETURN
back to
add additional title
or
(O) to exit, or MENU/LIST
the Title List-Original menu.
chapto go
then press ENTER/MEMO-
RY.
The
new
chapters
title appears in the updated
of the title are added to the
Playlist.
Playlist.
All
49
EDITNG
Title and
Deleting
VR
a
Chapter Editing (Continued)
Title/Chapter
+RW
Deleting
+R
You
If you erase a title or chapter from the Playlist menu on
DVD-RW discs formatted in VR mode, you only remove
it from the Playlist; the title/chapter remains in the
Original
menu.
If you choose to delete a title or chapter from Title List
or Chapter List menu, the title or chapter is actually
deleted from the disc and the
remaining time available
for recording increases. Titles/chapters deleted from the
Original are also removed from the Playlist.
1
can
VR
Part
a
delete
part which you do
a
not want in the title.
Press MENU/LIST
Title
repeatedly to display
List-Original or Title List-Playlist menu.
Use vVbBto choose
2
title you want to
delete then press ENTER/MEMORY.
The options appears on the left side of the menu.
3
Select 'Delete Part' from the
a
options
on
the
menu.
e.g., If you select "Delete Part"
Original
on
the Title List-
menu.
Note :
It may not be possible to delete
than 5 seconds long.
1
On the Title List
that
are
Play
less
Chapter
appears
or
on
the left side of the
Select 'Delete' from the
options
e.g., If you select "Delete"
on
on
the Title
Delete Part
Edit
Playlist
screen.
the
Title Name
Delete
Chapter List menu, use vV
bBto choose a chapter or title you want to
delete then press ENTER/MEMORY.
Options
2
chapters
menu.
List-Original
menu.
4
Press ENTER/MEMORY.
Title Edit
(Delete Part)
menu
appears
on
the TV
screen.
'Start Point' icon is
Play
highlighted.
Title 1
Delete Part
20/8 00:35:42
Chapter
Title Edit
Delete
Edit
Playlist
Start Point
End Point
0:00:00.00
Cancel
3
4
Press ENTER/MEMORY to confirm.
The confirm message for
deleting
will appear.
Starts
The selected
chapter or title is deleted.
After pressing ENTER/MEMORY, the new, updated
menu is displayed.
5
6
Repeat steps
-
4 to continue to delete from the
menu.
Press RETURN
(O) repeatedly
to exit the
menu.
6
When DVD+RW
changed
?
If
more
titles
?
recording,
are
combined into
repeatedly
use
to find the
part is indicated
on
only the last
recording
starting point.
the
starting point
Progress
of
8
Press ENTER/MEMORY at the
Bar.
step, search and slow-motion
to find
point.
ending point
of
the section you want to delete.
You can cancel the selected point, use v / V to
select 'Cancel' icon then press ENTER/MEMORY.
After you finish editing, select the 'Done' icon
then press ENTER/MEMORY.
The confirm message for
one.
pause step, search and
7
9
Close
the section you want to delete.
'End Point' icon is highlighted.
10Use
deleting
will appear.
b / B to select 'Yes' then press
ENTER/MEMORY.
The selected
List-Original
50
and
Use pause
the ending
is
deleted, the
When you are deleting a title or chapter,
one on DVD+R/RW increases remaining
time.
name
to 'Deleted Title'.
than two titles
are
the deleted title's
Move Point
Press ENTER/MEMORY at the
The
Notes :
?
playback
5 slow-motion
Use b / B to select 'Yes' then press
ENTER/MEMORY.
1
Select
Done
part is deleted from the title and Title
or
Title
List-Playlist
menu
appears.
Title and
Naming
You
1
Chapter Editing (Continued)
VR
Title
a
can name
titles
Video
+RW
Combining
+R
VR
independently.
On the Title List menu, use vVbBto choose
the title you want to name then press
ENTER/MEMORY.
Options
2
on
appears
the left side of the
Use v/V to select the 'Title Name'
menu
then
Original
on
into
adjacent Playlist
or
one.
only
one
chapter
within the title.
1
appears.
e.g., If you select "Title Name"
+R
Use this function to combine two
Original chapters
Into One
This function is not available if there is
press ENTER/MEMORY.
Keyboard
+RW
Chapters
Note :
menu.
option
Two
On the
Chapter List menu, select the second
chapter of the two chapters you want to combine then press ENTER/MEMORY.
Chapter List options appear on the left side of the
the Title List-
menu.
menu.
Play
2
Chapter
Title Name
Delete
The combine indicator appears between the two
chapters you want to combine.
e.g., If you select "Combine"
Delete Part
Edit
Use v / V to select 'Combine'.
Playlist
on
the
Chapter
List-
menu.
Playlist
Play
3
Enter/memory
for the title. Use vVbB
a name
Title
character then press ENTER/MEMORY to confirm your selection. Refer to step 5 as
to select
shown
a
on
page 28
Delete
(Disc Label).
Edit
Title 1
3
Alphabet Capital
123456789
0
ABCDE
J
FGH
I
Combine
Move
Press ENTER/MEMORY to confirm.
After
is
pressing ENTER/MEMORY,
displayed.
the
updated
menu
KLMNOPQRST
UVWXYZ
OK
4
Cancel
Space
Delete
Choose OK then press ENTER/MEMORY to save
the name and return to the previous menu dis-
play.
5
Press RETURN
(O) repeatedly
to exit the
menu.
Notes :
?
Names
be up to 21 characters long.
?F or discs formatted on a different DVD Recorder, you
will see only a limited character set.
?
When
can
recording
on
discs, the entered
player only
DVD-R, DVD+R
name
is
or
displayed
DVD+RW
on
the DVD
after finalization.
51
EDITNG
Title and
Moving
Chapter Editing (Continued)
VR
Playlist Chapter
a
Protect
Use this function to re-arrange the playing order of the
Playlist chapters on the Title List-Playlist menu.
1
Press MENU/LIST
repeatedly
display Title
to
List-Playlist menu.
To display the Chapter List-Playlist
"Using the Chapter List-Playlist" on
editing
menu, refer to
Chapter List
Title 1
6/27 Sun
Playlist
only
one
chapter.
deleting
+R
protect against accidental recording,
of the title.
Press MENU/LIST to
display
Use vVbBto choose
the Title List
menu.
2
title you want to protect then press ENTER/MEMORY.
Options appear on the left side of the screen.
3
Select 'Protect' from the
Note :
This function is not available if there is
or
+RW
Title
Use this function to
1
page 44.
a
a
options.
Play
0:25:45
1/9
Full
Play
Chapter
Delete
Select
2
Select
a
chapter
LIST
from the
Protect
Close
Original
Edit
Chapter List-Playlist
menu.
Press ENTER/MEMORY.
3 Chapter List-Playlist options
of the
appear
on
the left side
4
Press ENTER/MEMORY to confirm.
The lock mark will appears
4 options then press
Tip
Playlist
If you select a title that has already been protected on
the Title List menu, you can 'unprotect' it by choosing
"Protect" from the Title List menu options. After doing
ENTER/MEMORY.
that, you
Play
Title
Delete
Combine
Move
Edit
Use vVbBto choose the
move
the
chapter
you want to
to then press ENTER/MEMO-
place
RY.
After
pressing ENTER/MEMORY, updated
displayed.
52
the title's thumbnail.
menu.
Use v / V to select 'Move' from
5
on
menu
is
can
edit and delete the title.
Title and
Hide
a
Chapter Editing (Continued)
+RW
Chapter
Use this function to hide
a
+R
chapter
Dividing
on
Chapter
List
Use this command to
menu.
1
On the
List menu,
Chapter
choose a chapter
use
vVbBto
2
appear
on
split
1
The
you want to hide then press
title up into two
a
new
titles.
menu
options
appears
on
the left side of the
screen.
the left side of the
Select ''Hide' from the
screen.
Select 'Divide' from the Title List
2
options.
menu
options.
Play
e.g., If you select "Hide"
Play
on
the
Chapter
List
menu.
Full
Play
Chapter
Combine
Title
Delete
Hide
Edit
Title Name
Protect
Divide
Edit
3
+RW
On the Title List menu, select a title you want to
divide then press ENTER/MEMORY.
ENTER/MEMORY.
Options
One Title Into Two
Press ENTER/MEMORY to confirm.
The
chapter's
thumbnail will dim.
3
Tip
If you select a chapter that is already dim on the
Chapter List menu, you can 'show' it by choosing
"Show" from the Chapter List menu options. After
that, you
are
able to
see
Press ENTER/MEMORY after the 'Divide'
option
is
highlighted.
Title Edit (Divide)
menu
appears and goes into
STOP mode.
doing
the title.
Current
Title Edit
Divide
picture
Title 1
20/8 00:35:42
The first title's
thumbnail
#01
00:00:00
The second title's
thumbnail
Divide
00:00:00
Cancel
Select
Done
Move Point
Close
4
Use pause step, search and slow-motion to find
the point you want to divide the title.
5
When the 'Divide'
option
ENTER/MEMORY at that
You
can remove
the
is
highlighted,
point.
dividing point
press
and exit the Title
Edit
(Divide) menu, use v / V to select 'Cancel'
option then press ENTER/MEMORY. The division
point is removed.
6
Choose 'Done'
RY to fix the
option then press
dividing point.
The title is divided into two
new
ENTER/MEMO-
titles. It take up to
4 minutes to divide.
53
EDITNG
Additional Information
Overwriting Recording
To overwrite
a new
video
recording
recorded title, follow these
available for DVD+Rs, that
on a
not
+RW
You
1
2
input source you
channel, AV1-4, DV).
Press MENU/LIST to
want to record
display
view the Title List
that is
player
displayed on the other
playing DVD+RW or
menu
of
capable
DVD+R discs.
menu.
1
Insert DVD+R
or
DVD+RW disc recorded
already.
1/12
Original
2
DVD+RW
Title 1
1:07:16
+R
can
DVD
(TV
the Title List
Title List
HQ
menu
record at the end of
the Disc.
Select
displayed
Recorders or Players
other DVD
on
previously
steps. This feature is
always
Title List
Viewing
+RW
7/12
Title 2
0:16:00
9/12
Press TITLE in
Title List
mode.
Play
will appear
menu
as
shown below.
Title 3
0:35:00
10/12
0:30:00
Tip
Free
You
Title 4
13/12
Select
Title 5
0:08:00
DISPLAY
16/12
Info
STOP
Title 6
0:10:00
19/12
REC
can remove
the Title List
menu
by pressing
(x).
0:15:00
Close
DVD+RW
Title List
3
Use vVbBto choose
a
title you want to
over-
write.
TITLE 1
7/12
4
0:16:00
9/12
TITLE 3
0:35:00
10/12
0:30:00
Press REC
Overwrite
(z) to start overwrite recording.
recording starts from the start point of
the
title.
5
TITLE 2
TITLE 4
13/12
Press STOP
The
new
TITLE 5
0:08:00
16/12
TITLE 6
0:10:00
19/12
0:15:00
1/2
(x)
to
stop the overwrite recording.
title is created and
updated
menu
is dis-
played.
3
To
back
title, select the title you want
then press ENTER/MEMORY or PLAY (N).
play
a
Notes :
This function is not available for
If the overwrite is
protected title.
the recording length
a
longer than
of the current title, the next title is overwritten. But
if next title is protected, the overwriting stops at
the starting point of the title.
If the selected title's recording length is less than 10
seconds, the
title is
next title is overwritten. But if the next
protected, overwriting stops.
Playing
Your
Other DVD
Most
Recordings on
Players (Finalizing
DVD
regular
players
can
play
a
Disc)
finalized discs
recorded in Video mode, finalized DVD+R or DVD+RWs.
A small number of players can also play DVD-RW discs
recorded in VR mode, finalized or not. Check the manual that came with the other player to check what formats
of discs it will
Finalizing
play.
'saves' the
that the disc
can
be
recordings and editings in place so
played on a regular DVD player or
computer equipped with
a
suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen
navigating the disc. The menu can be accessed by
pressing MENU/LIST or TITLE.
To finalize a disc, refer to "Finalize" on page 28.
for
Notes :
Unfinalized DVD+RW is
playable
on
regular
DVD
play-
ers.
The edited contents of
a
DVD+RW disc is
compatible
regular DVD players only after finalization.
Any edited contents of the DVD+R disc are not
compatible on regular DVD players. (Hide, chapter
combine, added chapter mark, etc.)
on
54
Language Code
and
Country
Code List
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Tu r kish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Tu rkmen
8475
Cambodian
7577
Italian
7384
Por tuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Country
Choose
a
8373
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Code
ET
Country
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
AR
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
UG
Croatia
HR
Jamaica
JM
Pa raguay
PY
Ukraine
UA
CZ
JP
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Por tugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
Republic
AF
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
Country
Code
Country
Ethiopia
Fiji
SG
SK
55
REF NC
Tr oubleshooting
Check the
following guide
for the
possible
of
cause
a
before
problem
service.
contacting
Cause
Symptom
Solution
No power.
The power cord is disconnected.
Plug the power
securely.
No
TV/DVD mode for the recorder is set to
Press TV/DVD
TV.
repeatedly to choose DVD mode. TV
indicator disappears in the display
picture.
cord into the wall outlet
the remote control
on
window.
The TV is not set to receive DVD
Select the
Recorder
on
signal output.
appropriate video input mode
so the picture from the DVD
the TV
Recorder appears
The video cable is not connected
on
the TV
Connect the video cable
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
equipment connected with the
audio cable(s) is not set to receive
Recorder signal output.
The audio cables
are
DVD
not connected
theTV.
on
Audio Receiver
mode
input
on
the
you can listen to the
sound from the DVD Recorder.
so
Connect the audio cable
securely.
securely.
The
playback picture
is
The power of the equipment connected
with the audio cable is turned off.
Tu rn
The audio
Replace
connecting
The disc is
cord is
damaged.
the
on
equipment
connected with
the audio cable.
it with
new one.
Clean the disc.
dirty.
poor.
The DVD Recorder
does not start
No disc is inserted.
Insert
disc.
a
cator in the
playback.
An
unplayable
disc is inserted.
Insert
placed upside
down.
indi-
disc.
(Check the disc
system, and regional code.)
playable
a
type, color
The disc is
(Check that the disc
display window is lit.)
Place the disc with the
playback
side
down.
The disc is not
within the
placed
guide.
Place the disc
inside the
dirty.
Clean the disc.
The
level is set.
Cancel the
the
The
picture from the
external input is distort-
The video
ponent is
signal from the
copy-protected.
external
com-
Some channels
are
Those channels
are
function
Rating
or
change
level.
You cannot connect via this Recorder.
Connect the
component directly
Aerial
Camcorder
Camcorder is off.
is not
or
cables
are
loose.
shown.
to your
"Program
Edit"
pages 19-20.
Tighten
connections
Tu rn camcorder
on
or
replace
and
cable.
operate
properly.
Camcorder
input
or
image
via
DV IN to
DVD Recorder is not
shown
Restore channels. See
on
picture or sound of
broadcasting channel is
weak or missing.
The
image
not stored in the
Recorder.
when
skipped over
usingv/V.
56
tray correctly
TV.
ed
A/V
rating
the disc
guide.
The disc is
Rating
on
on
TV
screen.
DVD Recorder INPUT SELECT is
Use AV/FUNC. to select
incorrect.
(AV1, AV2, DV, etc.)
input
channel
Troubleshooting (Continued)
Cause
Symptom
The disc
Can't
play a disc
recorded using this
Recorder
on
Some
another
was
Solution
recorded in Video mode.
Finalize the disc.
will not
No solution.
players
play
final-
even a
ized disc recorded in Video mode.
player.
The disc
was
recorded in VR mode,
The other
player must
order to play it.
ble in
Cannot record
not record
or
did
successfully.
Discs recorded with copy-once material
cannot be played on other players.
No solution.
The
Use another disc.
remaining
blank space
source
copy
you
are
setting
the
channel is tuned
When
trying
to record is
on
to
recording
the
recording channel,
a
the TV's
own
tuner.
Video mode disc,
programs that are copy-once
cannot be recorded.
is not
compati-
You cannot record the
source.
Select the channel
the Recorder's
protected.
When
recording
possible.
the disc
on
be RW
is insufficient.
The
Timer
(page 28)
Clock in DVD Recorder is not set to
built-in TV tuner.
Use
protected
cor-
rect time.
on
VR mode formatted disc for copymaterial.
once
a
Set clock to correct time. See "Auto
Clock Set"
or
"Manual Clock Set"
on
page 21.
Timer has been
Reprogram Timer. See "Timer
Recording" on page 39.
programmed
incorrectly.
Timer record indicator
appear after
Stereo Audio Record
and/or
Playback
TV is not
is not
present.
light does
programming timer.
not
Reprogram
Stereo-compatible.
No solution.
Broadcast program is not in stereo for-
No solution.
Timer.
mat.
DVD Recorder A/V Out
connected to TV A/V In
jacks are
jacks.
Make A/V connections. Stereo is
not
available
only
via A/V
output from DVD
Recorder.
DVD Recorder Audio/Video Out is not
selected for
viewing
Select AUX
or
A/V
source as
TV
input.
at the TV.
DVD Recorder's TV audio channel is set
Set TV audio channel mode to Stereo.
to
See
mono.
"Changing
TV audio channel"
on
page 38.
The Remote Control
The Remote Control is not
does not work
remote
properly.
pointed
at the
the DVD Recorder.
sensor on
Point the Remote Control at the remote
sensor on
The Remote Control is too far from the
Operate
the DVD Recorder.
the Remote Control within 7
m.
DVD Recorder.
There is
an
obstacle in the
path
of the
Remove the obstacle.
Remote Control and the DVD Recorder.
The batteries in the Remote Control
are
Replace
the batteries with
new ones.
exhausted.
Moisture Condensation
Moisture condensation
?
If the DVD Recorder is moved from
warm
In locations where moisture condensation may
can occur:
a
cold
place
to
a
?
Keep
the DVD Recorder
plugged
outlet with POWER On. This will
place.
into
help
occur:
AC power
prevent condenan
sation.
?
Under
extremely
humid conditions.
?
If condensation has occurred, wait a few hours for the
DVD Recorder to dry before using it.
57
REF NC
Specifications
General
Power
AC 110-240V, 50/60 Hz
30W
requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Television
430
x
69
x
280
mm
(w
h
x
x
d)
3.8Kg
5˚C to 35˚C
5 % to 90 %
PAL B/G, SECAM L colour
system
Recording
format
PAL
Recording
format
DVD Video
system
Recording
Recordable discs
Recording,
DVD-VIDEO
DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable
Recordable time
Approx.
6 hours
1 hour
(HQ mode),
(EQ mode)
2 hours
(SQ mode),
4 hours
(LQ mode),
Video
recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
27MHz
MPEG 2
48kHz
Dolby Digital
Playback
Frequency
DVD
(PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to
DVD(PCM96kHz):8Hzto44kHz
More than 100 dB (AUDIO OUT connector)
Less than 0.008% THD (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
response
Signal-to-noise
ratio
Harmonic distortion
Dynamic
range
20 kHz
Inputs
ANTENNA IN
Antenna
VIDEO IN
input,
75 ohms
Vp-p 75 ohms, sync negative, RCA jack x 2 / SCART x 2
0dBmmorethan47kohms,RCAjack(L,R)x2/SCARTx2
4 pin (i.LINK/IEEE 1394 standard)
1.0
AUDIOIN
DV IN
Outputs
VIDEO OUT
Vp-p 75 Ω, sync negative, RCA jack x 1 / SCART
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin
(C)0.3V(p-p)75Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
0.5 V (p-p), 75 Ω, RCA jack x 1
3 V (p-p), 75 Ω, Optical connector x 1
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
1
S-VIDEO OUT
COMPONENT VIDEO OUT
Audio
output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
x
1
/ SCART
Accessories:
Scartcable.............................1
Videocable.....................1
Audiocable(L,R)........................1
RFCoaxialCable................1
Design
and
specifications
are
subject
Manufactured under license from
marks of
58
Dolby
change
without notice.
Laboratories.
"Dolby",
"Pro
Logic"
and the double-D
Laboratories.
Dolby
DTS and DTS
to
Digital
Out
are
registered
trademarks of
Digital
Theater
Systems,
Inc.
symbol
are
trade-
P/NO
:
3834RH0065D
Download PDF

advertising