LG LM-U1350A Owner's manual

LG LM-U1350A Owner's manual
LM-U1350/LM-U1050/LM-W550_Eng-84R
MINI HI-FI
System
OWNER'S MANUAL
MODEL
:
LM-U1350
(LM-U1350A/D/X, LMS-U1350)
LM-U1050
(LM-U1050A/D/X, LMS-U1050)
LM-W550
(LM-W550A/D/X, LMS-W550)
LM-U550
(LM-U550A/D/X, LMS-U550)
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Designs
and
notice for
specifications
improvement.
are
subject
to
change
CD-R/RW
without
Precautions
CAUTION
CAUTION
Most
concerning
appliances
the Power Cord
recommend
they
be
placed
upon
a
dedicated circuit;
That
is,
a
appliance
CAUTION: THESE SERVICING
Check the
INSTRUCTIONS ARE FOR USE BY
certain.
single
outlet circuit which powers only that
no additional outlets or branch circuits.
and has
specification page
of this owner's manual to be
QUALIFIED SERVICE PERSONNEL ONLY.
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT PERFORM ANY SERVICING OTHER
THAN THAT CONTAINED IN THE OPERATING
INSTRUCTIONS UNLESS YOU ARE
QUALIFIED TO DO SO.
Caution: The apparatus should not be
exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases,
should be placed on the apparatus.
CAUTION: This
product employs
a
Laser
System.
To ensure proper use of this product, please
read this owner's manual carefully and retain
for future reference. Should the unit
maintenance,
contact
an
require
authorized service
center.
Use of controls, adjustments, or the
performance of procedures other than those
specified herein may result in hazardous
radiation exposure.
To
prevent direct exposure to laser beam, do
try to open the enclosure. Visible laser
not
radiation when open. DO NOT STARE INTO
BEAM.
WARNING: Do not install this
confined space such
lar unit.
as a
equipment
bookcase
or
in
a
simi-
Do not overload wall outlets. Overloaded wall
outlets, loose
damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance,
and have the cord replaced with an exact replacement part
by an authorized servicer.
or
Protect the power cord from
physical or mechanical abuse,
being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
such
as
Table of Contents
INTRODUCTION
OPERATION
Precautions...............................2
Presettingtheradiostations.................12
TableofContents..........................3
Listeningtotheradio......................12
BeforeUse................................4
TapePlayback............................13
BasicPlayback.........................13
ToStopPlay...........................13
.13
ToPlayRewindorFastForward.
Dubbing...............................13
SafetyPrecautions........................4
NotesonDiscs..........................4
NotesonRemoteControl...................4
NotesonTapes..........................4
FrontPanel/RearPanel.....................5
RemoteControl............................6
Connections..............................7
SpeakerSystemConnection................7
Antenna(Aerial)Connections................7
BEFORE OPERATION
AudioAdjustment........................8-10
.8
SettingtheVoltage(OPTIONAL).
SettingtheCLOCK.......................8
VolumeAdjustment.......................8
SoundQualityAdjustment..................8
SleepFunction...........................8
.
.
.
.
.
.
.
.
.
.
.
MUTE.................................9
.
.
.
.
.
.
.
.
.
.
Recording...............................13
BasicSetting...........................13
Recording from Radio, CD, USB or Auxiliary
source................................13
CDtoTapeSynchronizedRecording.
.
.
.
.
.
.
.
.13
CDPlayback...........................14-15
BasicPlayback.........................14
ToPausePlay..........................14
ToStopPlay...........................14
ToSkipaTrack.........................14
ToSearchaTrack.......................14
ToGotothenextdiscs...................14
ToSelectadiscdirectly...................14
.14
ToReplacediscsduringPlayback.
.
.
.
.
.
.
.
.
.
TocheckMP3fileinformation...............14
9
ToRepeatPlay.........................15
ToProgramPlay........................15
DISPLAYMODE.........................9
ConnectingUSBPort......................16
DIMMER...............................9
USBdevicePlayback....................16-17
BasicPlayback.........................16
ToPausePlay..........................16
ToStopPlay...........................16
SURROUND............................9
XDSS
(Extreme Dynamic
Sound
System)
.
.
.
.
.
.
DEMO.................................9
OAO(OrientaionAcousticOptmizer).
.
.
.
.
.
.
.
.
.9
XTS-Pro...............................9
MP3OPTIMIZER.........................9
ToGotothenextcards...................16
TimerFunction..........................10
ToSkipaTrack.........................16
AuxiliaryFunction.........................10
TocheckMP3fileinformation...............16
RDSFunction-OPTIONAL..................11
ToRepeatPlay.........................17
ToProgramPlay........................17
AboutRDS.............................11
ProgrammeSearch(PTY).................11
REFERENCE
Troubleshooting..........................18
AdditionalInformation.....................18
Specifications............................19
About the
symbols
Indicates hazards
itself
or
for instructions
likely to cause
damage.
harm to the unit
other material
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
3
INTRODUC
Before Use
Precautions
Safety
Handling
When
The
Notes
the unit
original shipping
packing
in handy. For maximum protection, re-pack
as it was originally packed at the factory.
remote
use
volatile
liquids,
such
remote
as
the unit. Do not leave rubber
near
contact with the unit for
They
will leave marks
Cleaning
on
insecticide spray,
or
long period
a
plastic products
in
a
Remote control
of time.
battery
solution. Do not
benzine,
or
use
thinner,
are
moistened with
a
these
as
might damage
alcohol,
the surface
two
batteries with
aligned correctly.
Caution
Do not mix old and
Notes
Discs
on
Hold the disc
by
playback side of the disc.
edges so that fingerprints
the
will not
the surface.
Do not stick paper
on
Preventing
discs
Do not touch the
on
rear
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
Handling
get
the
extremely dirty,
detergent
of the unit.
Notes
cover on
control, and insert
mild
strong solvents, such
as
battery
(size AAA)
and
lightly
installation
of the remote
R03
soft, dry cloth. If the surfaces
from the front of the
sensor.
Detach the
the surface.
the unit
soft cloth
use a
(7 m)
sensor.
To clean the cabinet
Use
and press
About 30° in each direction of the front of the
Angle:
Do not
About 23 ft
Distance:
the
the surface clean
keep
sensor
the buttons.
materials
come
To
Operation Range
Point the remote control at the remote
carton and
unit
Remote Control
Remote Control
the unit
shipping
on
Tapes
record
Removing the tab(s) of the cassette (with a small
screwdriver) will prevent accidental erasure.
Side A
or
tape
on
the disc.
Tab for side A
Tab for side B
Storing
After
discs
playing,
store the disc in its
To record
case.
Do not expose the disc to direct sunlight or sources
heat, or leave it in a parked car exposed to direct
again,
cover
the hole of the tab with adhesive
tape.
of
as there may be
increase inside the car.
sunlight,
Cleaning
a
considerable
temperature
discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for
4
analog
records.
Adhesive
tape.
Front Panel/Rear Panel
FM
1
GND
13
2
3
17
12
A
U
16
X
4
10
7
9
R
14
8
?
POWER
?
DISC SKIP button
?
(
DISC 2, DISC
?
PLAY MODE button
?
DEMO button
:
3.
Z PUSH EJECT
10.
x STOP/CLEAR button
?
RECORD/ RECORD PAUSE
?
PRESET UP/DOWN buttons
3)
?PLAY(
OPTIONAL
?
(LM-U1350/1050)
4.
position-TAPE
2
(DECK 2)
( z REC/ X )
button
(b)
:
OPTIONAL
TUNING buttons
?
?
CD SKIP/SEARCH
To cancel
?
TAPE REWIND/FAST FORWARD
it, press POWER
DEMO
or
PROG./MEMO./ENTER button
?
MODE/RIF/HI-DUBB. button
?
MP3 OPTIMIZER button
again.)
( .m / M> )
11 .?MIC
12.
TIMER button
?
CLOCK button
Z OPEN) button
XTS-Pro buttton
?CDOPEN(
?
XDSS button
?
SURROUND
?
OAO button
(SURR.)
5.
HEADPHONE SOCKET
6.
?
TUNER button
?
TAPE button
?
CD button
?
AUX button
?
USB button
button
(PHONES)
-
6.3mm
( .m / M> )
(MIC VOL.)
MIC JACK
?
VOLUME CONTROL KNOB
(MIC)
-
EQUALIZER
?
SET/CD PAUSE
?
AM-NOISE button
RDS button
?
MULTI JOG.
:
6.3mm
:
:
OPTIONAL
OPTIONAL
(EQ) button
(CD X ) button
?
?
buttons
buttons
VOLUME KNOB
?
CD SYNC./NOR-DUBB. button
?
button
B ) button
REVERSE PLAY
DEMO in power off state to demonstrate
the function in the display window.
?
?
15
?
(Press
?
L
9.
DISC DIRECT PLAY buttons
(DISC 1,
2.
button
STANDBY/ON)
L
R
11
5
6
1.
AM
OPTIONAL
13.
DISPLAY WINDOW
14.
POWER CORD
15. SPEAKER TERMINAL
16. AUXILIARY INPUT JACKS
17. ANTENNA TERMINAL
(LM-W550)
7.
Z PUSH EJECT
8.
USB
position-TAPE
1
(DECK 1)
port (LM-U1350/1050/550)
5
INTRODUC
Remote Control
15
14
1
13
2
12
3
11
4
5
10
9
6
8
7
1.
POWER button
2.
PRESET
9.
/
(
)
buttons
3.
CLOCK button
4.
CD FUNCTION buttons
TAPE FUNCTION buttons
?
RECORD/ RECORD PAUSE
?
FORWARD PLAY
?
REVERSE PLAY
(B)
( b ) button
TAPE STOP
button
?
?
PLAY/ PAUSE
?
CD
6.
6
)
?
CD SKIP/SEARCH
?
TUNING UP/DOWN
?
5.
STOP(
( B/ X )
button
button
( .m/M> ) buttons
( .m/M> ) buttons
REPEAT button
DISC SKIP
(D.SKIP)
XDSS button
?
SURROUND
?
OAO button
?
XTS Pro button
7.
NUMBER buttons
8.
MP3 file information
REWIND
?
(m)
button
OPTIONAL
button
(M)
button
TAPE-1/2 SELECT buttons
?
USB button
?
FUNCTION button
(
/
)
button
(LM-U1350/1050/550)
14. MUTE button
15.
display (INFO)
:
10. PROGRAM/MEMO button
13.
(SURR.)
FAST FORWARD
?
12. VOLUME CONTROL
button
(EQ PATT.)
?
?
button
11. SLEEP button
button
EQUALIZER PATTERN
?
(x)
( z/ X )
button
button
?
DISP.MODE button
?
DIMMER button
(LM-U1350/1050)
Connections
Speaker System
Connect the
speaker
Connection
cords to the
speaker
terminals.
INTRODUC
Red
Black
Left
Right Speaker
Speaker
otes
Be
?
are
sure
the
speaker
cord to the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cords
reversed, the sound will be distorted and will lack base.
If you
?
to match the
use
front
speakers
with low maximum
input rating, adjust
the volume
carefully
to avoid excessive
output
on
speakers.
?
Do not disassemble the front
?
Be
sure
to connect the
cover
speaker
of
supplied speaker.
cord with power off.
Antenna
(Aerial) Connections
Connect the
supplied
FM/AM antennas for
listening
to the radio.
For AM(MW) reception, connect
the loop antenna (aerial) to the
terminal marked AM
FM external
antenna(aerial)
(not supplied)
AM
loop antenna (aerial)
(Supplied)
75
coaxial
cable
FM indoor
AM(MW) loop
antenna (aerial)
FM external
GND
antenna(aerial)
FM
antenna(aerial)
(not supplied)
AM
Position
it for the
best
FM 75
AM
reception
otes
?T
o
prevent noise pickup, keep the AM loop
?
Be
?
After
antenna away from the unit and other
fully extend the FM wire antenna.
connecting the FM wire antenna, keep it
sure
components.
to
as
horizontal
as
possible.
7
Audio
Setting
Adjustment
the
Sound
voltage (OPTIONAL)
If your set is equipped with a voltage selector at the
back side, be sure to set it to your local power supplied
before connecting the AC power cord.
Setting
1
the CLOCK
(If
the clock
-
2
The hours
Select
a
turning
Select
a
button
on
requires setting, press
than 2 seconds.)
begin to blink.
cycle
the remote control
or
FLAT
MUSICAL
cycle by
1
(24HR)
can
the level
5
Press SET.
6
Use MULTI JOG. to set the correct minutes.
7
Press SET and the correct time is shown
sleep
timer is
turned off after the
T
t
FLAT
1
display.
to see the
by turning
To
Adjustment
specify
the time
delay
turned off, press SLEEP.
In the display window you
)
Headphone
a
(
)
to decrease it
on
level,
or
the remote
headphone plug ( 6.3mm)
headphone jack.
The speakers are automatically disconnected
you plug in the headphones (not supplied).
system
pressed the time interval
by 10 minutes. i.e.
2
To check the
remaining
time until the power is
turned off.
While the
sleep function is active
briefly. The time remaining until it
displayed for about 5 seconds.
press SLEEP
turns off is
ote
Socket
stereo
that the
80...70... etc. Select the desired time to turn off.
counterclockwise to
to increase the sound
can see
means
after 90 minutes.
Each time the button is
decrease it.
(
automatically
elapsed.
before the power is
before it turns off is reduced
VOLUME CONTROL KNOB clockwise to
Press VOLUME
MULTI JOG.
time has
for about 5 seconds. This
press the VOLUME
control.
DRAMA
used, the power is automatically
specified
on
time.
Connect
JAZZ
Function
Sleep
When the
or
ROCK
select Three of sound mode.
Press ENTER.
level,
t
When you select USER MODE, press the
ENTER button repeatedly.
3
increase the sound
?
T
USER MODE
t
turns off
?
SALSA
T
Adjuet
briefly
CLASSIC
t
2
?Turn
changes
(BASS, MIDDLE, TREBLE)
Press SET to confirm the selected hour
Press CLOCK at any time
the
r
cycle.
Volume
PATT.
on
r
12 hour
SAMBA
or
POP
t
Use MULTI JOG. to set the correct hours.
8
EQ button
panel.
You
the
by using EQ
or
and hold
MULTI JOG..
(12HR)
3
4
desired sound mode
Each time you press the button the indication
as follows.
more
24 hour
Quality Adjustment
activate stereo sound
front
Press CLOCK.
CLOCK for
?To
into the
when
If you press SLEEP while the
the SLEEP time is reset.
To cancel the
sleep
sleep
time is
displayed,
timer mode
If you wish to stop the function, press the SLEEP button
repeatedly until SLEEP 10 appears, and then press
SLEEP
once
again
while SLEEP 10 is
displayed.
Audio
Adjustment
MUTE
DISPLAY MODE
Press MUTE to mute your unit.
You can mute your unit in order, for
Whenever you press DISPLAY MODE (DISP. MODE),
you can enjoy the spectrum change with 6 types in the
the
telephone,
example,
"MUTE" indicator blinks in the
to
answer
display
(LM-U1350/1050)
window.
display
window.
DIMMER
This function is darken the
SURROUND
To activate surround mode
?
Select
a
ROUND
desired surround mode
(SURR.)
button
on
the SUR-
by using
panel
the front
or on
the
remote control.
?
Each you press the button the indication
as follows.
is
darken, and if you press it
t
darken
by
DEMO
changes
T
THEATER
CINEMA
t
DISCO
t
half in
T
HALL
T
t
display
once
(LM-U1350/1050)
to cancel
EALA
TUNNEL
r
CHURCH
by
Press DEMO in power off state to demonstrate the
r
VOCAL
window
more, the display will
half too. To cancel it press the button again.
function in the
SURROUND OFF
display
power-on status. Press DIMMER once, and the
it, press POWER
or
DEMO
During demonstration in power-on
it by using the other buttons.
OAO
SURROUND OFF
display.
(Orientation
again.
status you
Acoustic
can
cancel
Optimizer)
Press OAO to reinforce the bass sound. The "OAO"
XDSS
-
-
(Extreme Dynamic Sound System)
Press XDSS to reinforce
treble, bass and surround effect.
Each you press the button the indication
follows.
XDSS OFF
t
XDSS ON
changes
indicator
lights and
right.
side from the
"OAO OFF" passes
"OAO ON" passes by with the left
cancel, press OAO again than
To
by
with the left side from the
right.
as
XTS Pro
The
unique sound quality of the LG Technology creats
optinum sound for you to play the prefect playback
the original sound and to feel the living sound source.
the
of
Each time you press XTS Pro the
following order.
setting changes
the
XTS-P ON
t
XTS-P OFF
ote
The XTS pro function will not be
earphone has connected.
MP3
operated
when
an
Optimizer
This function is
Improve
optimizered
for
compressible
MP3 file.
the bass sound to make swweet sound.
Each time you press MP3 OPTIMZER the
changes in the following order.
MP3OPTONt MP3OPTOFF
setting
in
BEFORPATIN
Audio
Adjustment
Timer Function
The unit
can
set the clock function in power on/off state.
With the TIMER function you can have the radio
reception and recording, CD play, tape play, USB
Device
1
play
or
turned
and off at the time desired.
on
setting mode.
TUNER-CD-TAPE-USB(LM-U1350/1050/550)
flashes in the display window in turn.
previous
memorized TIMER
press and hold the TIMER button
seconds.
setting,
-
The
previous
memorized timer
indicators appear in the
3
4
on
more
than 2
time and TIMER
display.
Press SET when the desired function is
blinking.
1.
a.
Press SET to confirm the minute to switch
function,
'PLAY' and 'REC' indicator blink in
the
display
window
alternately
9
10
Set the hour to switch off
11
Set the minute to switch off
12
13
14
Press SET.
for
Press SET to confirm the hour to switch off.
b. Select the
:
:
number with MULTI JOG. and press SET.
'ON TIME' indicator appears for about 0.5
display
window and then
disappears.
by turning
MULTI JOG.
Press SET.
""
15
appears in the display window and the
setting has been completed.
Switch the system off.
The selected function is
automatically
switched
and off at the time set.
To cancel
2. When you select the CD or TAPE function,
'ON TIME' indicator appears for about 0.5
the timer set
setting
check the timer
button
""
or
cancel. You
you can select
also check the timer
pressed
can
status.
To activate
-
display
or
Each time the TIMER button is
so
or
that
To cancel the
seconds in the
the volume level
Adjust
TUNER
TUNER
-
seconds in the
by turning
MULTI JOG.
on
play only
play and
recording
previous memorized preset
'REC' indicator
by turning
MULTI JOG.
about 3 seconds.
'PLAY' indicator
on.
'OFF TIME' indicator appears for about 0.5
seconds in the display window and then
timer
When you select the TUNER
by turning
disappears.
Press TIMER to enter the timer
For your reference
If you want to correct the
on
MULTI JOG.
Press CLOCK to check the current time.
For your reference
If you don't set clock, timer function doesn't work.
2
Set the minute to switch
7
8
check the
"
"
timer, press the TIMER
appears in the
display
window.
TIMER, press the TIMER button
disappears
in the
display
so
that
window.
window and then
disappears.
5
Set the hour to switch
6
Press SET to confirm the hour to switch
Auxiliary
1
2
on
by turning
MULTI JOG.
Connect
rear
an
on.
Function
auxiliary device i.e. TV
phone sockets.
or
VCR to the
mounted AUX
Press FUNCTION
on
the remote control.
Each time you press the button the indication
changes as follows.
FMtAMtCDtAUX
ote
You
can
also record from the
Recording
Section.
auxiliary input
source,
see
RDS Function
OPTIONAL
-
About RDS
Programme Search (PTY)
This unit is
A
which
casts with
equipped with RDS (Radio Data System),
brings a wide range of information from FM radio.
RDS is a system for transmitting station call signs or
network information, a description of station programme
type text message about the station or specifics of musi-
ability to encode broadProgramme Type (PTY) codes that indicate
type of material being broadcast. The following list
major
the
benefit of RDS is its
shows the abbreviations used to indicate each PTY
along
with
an
explanation
BEFORPATIN
of the PTY.
cal selection and the correct time.
RDS
Tuning
When
containing RDS data is tuned in,
automatically display the station's call sign
and the RDS indicator will light in the Display Window
as well as indicators for the programme type recognition
(PTY), Radio Text (RT), Clock Time (CT) and RDS
services programme (PS) if transmitted by the station.
a
FM station
the unit will
RDS
Display Options
The RDS
variety
system is capable of transmitting
a
wide
of information in addition to the initial call
that appears when
RDS operation the
a
broadcast network
or
sign
station is first tuned. In normal
display
will indicate the station name,
Pressing RDS on the
call letters.
front
panel
data
types in the sequence:
enables you to
cycle through
the various
PTY
RT
CT
(FREQUENCY
PS)
PTY (Programme type recognition)- The programme type is shown on the display window.
RT (Radio text recognition)- The radio station's
name is displayed on the display window.
CT (Time controlled by the channel)- Enable the
unit to receive the actual time and show it
on
the
display window.
PS (Programme Service name)- The programme
title is displayed on the display window.
otes
Some RDS stations may not choose to include some
of these additional features. If the data required for
the selected mode is not
Display
CT
being transmitted,
Window will show
a
PTY
NONE, PS NONE message.
the
NONE, RT NONE,
You may search for a specific
by following these steps:
Press TUNER
1
Select
2
a
Programme Type (PTY)
(or FUNCTION)
desired station
to select FM mode.
by pressing
.m /M >
buttons.
When the RDS transmission is received, the
display shows the program service name (PS) after
RDS indicator appears.
3
4
Press the RDS to select PTY mode.
To search for
still
displayed
available PTY
5
a
different PTY, press the PRESET
use is
UP/DOWN buttons while the last PTY in
to scroll
through
the list of
types.
When the PTY is
selected, press the
.m
/M > within 5 seconds.
The unit will go into an automatic search mode and
attempt to find the next station with acceptable
signal strength
that matches the desired PTY
type.
Presetting
You
can
preset
make
the radio stations
50 stations for FM and AM. Before
sure
Press TUNER
(or FUNCTION) to select
frequency (AM or FM) you want.
Every time you press this button, AM and
changes alternately.
1
Press .m/M > buttons
2
panel until
change.
the
on
FM
Press and hold PROG./MEMO.
panel
entered, FULL message
will appear in the display window for a moment and then
a preset number will blink. To change the preset number,
follow the
when the unit tunes in
a
station.
Tuning
Press PROG./MEMO.
on
the front
preset number will flash in the
control)
(or
4-5.
presets
Press and hold PRESET buttons
panel
display window.
.
on
the remote
or
appears
Press PRESET+/- buttons
the remote
steps
To recall
Use the MULTI JOG.
on
the front
on
seconds, "CLEAR" appears on the display
window and then press CLEAR, the stations are cleared.
Tuning
Scanning stops
Manual
4
2 to 5 to store other stations.
Repeat steps
for about two
the front
Press the .m / M> buttons.
A
panel.
For your reference
If all stations have already been
Automatic
3
the front
To clear all the memorized stations
otes
-
on
The station is stored.
6
the
indication starts to
frequency
Press PROG./MEMO.
5
that you have turned down the
volume to the minimum.
tuning,
PRESET
to select the
(
/
PRESET
(or
until the desired
control)
press it repeatedly.
preset
(
/
)
number
)
preset
number you want.
to the radio
Listening
1
To turn off the radio
Press .m / M>
select the
(or FUNCTION) to
frequency (AM or FM) you want.
Every time you press
changes alternately.
this
Press POWER to turn the unit off
button, AM and FM
function mode
The last received station is tuned in.
(CD,
TAPE
For your reference
If an FM program is
?
2
Press PRESET+/- buttons
on
the remote
(or PRESET ( /
control) repeatedly to select
preset station you
-
3
)
by rotating VOLUME
(or pressing VOLUME
remote control) repeatedly.
select another
so
noisy
that "STEREO"
the
want.
the volume
or
AUX).
disappears on
display window. There will be no stereo effect, but
the reception will be improved. Press MODE/RIF
again to restore the stereo effect.
the
Each time you press the button, the unit tunes in
one preset station at a time.
Adjust
Press MODE/RIF
or
?
To
improve reception
Repose the supplied antennas.
CONTROL KNOB
/
()
To listen to
on
the
non-preset radio stations
?
Use manual
?
For automatic
or
automatic
tuning
in
step
press and hold
.m/M > buttons on the front
2.
tuning,
panel.
otes
Use MODE/RIF
switch to
mono
(Radio Interference Filter) function
reception if stereo reception is
distorted
When
by noise.
recording the MW(AM) broadcast,
to
beat noises
does, press MODE/RIF once.
may
When listening the MW(AM) broadcast, beat noises
may occur. If it does, press AM-NOISE once.
occur.
If it
Each time you press AM-NOISE the
following order.
in the
AM NOISE ON
t
AM NOISE OFF
setting changes
Tape Playback
Basic
To
Playback
Press TAPE 1/2 to select TAPE 1
1
TAPE" appears in the
("NO
2
3
4
Open
(or 2) by pushing
position.
Insert
two cassette with the
one or
Press PLAY ( B
or b
:OPTIONAL
AUTO REVERSE DECK (TAPE
stops
reverse
Three
OR
times
repeatedly
at the
point
or
you want.
front
to
tape.
Cassette TAPE 1- Insert
a
playback tape
?
Cassette TAPE 2- Insert
a
blank
or
To
as
tape.
follow.
Function
Display
NOR-
DUBB.
DUBB.
NOR DUBB
HI-
HI-SP. DUBB.
DUBB.
HI DUBB
to dub.
Normal
speed
dubbing
(LM-U1350/1050)
(LM-W550/U550)
Double
speed
dubbing
(LM-U1350/1050)
(LM-W550/U550)
stop recording, press STOP( x ).
front and
plays
ote
six times
plays
front and
tape
?
Pressing
side, stops automatically.
After the cassette
( B)
Press NOR-/ HI-DUBB.
2
by
plays
reverse(backward play) side,
stops automatically.
OR
the front panel
during playback,
.m / M> on
Press TAPE 1/ 2.
1
the unit
2):OPTIONAL
After the cassette
Twice
Fast Forward
This function shows how to record from
After the cassette
OR
or
the remote control
press PLAY
Function
Display
Once
pressing
m / M on
PLAY MODE.
Pressing
panel or TAPE
during playback.
the front
Dubbing
).
select direction of the cassette you want
pressing
to
(or 2).
Rewind
Play
After
tape side
the bottom and then close the TAPE 1
can
To
cassette TAPE 1
Z PUSH EJECT
on
control
display window.)
AUTO STOP DECK (TAPE 1/2)
After auto stop deck plays only front side,
automatically.
You
STOP( x )/CLEAR
STOP( x ) on the remote
TAPE 2.
or
Stop Play
Press
reverse
The USB device
?
opening
side,
the
or
USB
tape-door
ports may be damaged if
when the USB device is con-
nected.
stops automatically.
Recording
Wind the
Basic
1
2
to the
tape
point recording
starts. Use
only
normal
To
Setting
Press CD
or
tapes. You
TUNER
USB.
(or TUNER/BAND),
the cassette TAPE 2 and insert
cassette into the cassette
Set the
recording
blank
compartment.
direction
Press PLAY MODE
a
:
repeatedly
1
complete
a
cassette.
1
2
Press z REC/ X
on
the front
2
panel.
"REC" blinks and holds the cassette in pause
mode.
Press
The
PLAY( B ) on the
recording begins.
To Pause
front
recording
"REC" blinks
on
the
display
window.
on
synchro recording function dubs
programmed titles automatically into
on
the
front
panel
display
window.
The
synchronized recording is started
automatically after about 7 seconds.
ote
?
CD
Press CD SYNC. in stop mode.
"REC" blinks and CD SYNC. is lit
If you wish to record the desired
track, select the
desired track with .m/M > before
commencing CD synchro recording.
panel.
To pause the recording, press z REC/ X
or z / X on the remote control again.
Tape Synchronized Recording
a
recording
or
STOP( x ).
and
direction.
Recording from Radio, CD, USB
Auxiliary source
only.
The CD
OPTIONAL
to set the
record from cassette deck 2
Stop recording
Press TAPE
CD to
Open
can
OPERATION
CD
Playback
Basic
Playback
Press
1
2
1
To Search
STANDBY/ON to turn
on
the unit.
After
pressing
at the
on
the front
panel
no
is
displayed.
tray, the "NO DISC"
you want.
This function is not available to
?
and
the disc
place
the left
on
(DISC 1)
is
played
Press DISC SKIP
With the label side up
ote
of the
4
8cm(3 inch) disc, put
To Select
disc
a
the front
on
it onto the inner circle
Press CD OPEN
( Z OPEN)
To
Replace
You
can
discs without
1
Audio CD: "READING" appears in the display
window, and then the total number of
time
are
2
dis-
played.
DISC 3
during playing
or
discs
during Playback
during playing a disc to
played next and replace
interrupting playback of the current disc.
Press the CD OPEN
( Z OPEN)
The disc
tray is opened. Two disc compartments
appear. Even if the unit is playing a disc, it doesn't
stop playing.
discs in the compartments with
Replace
new
ones.
The unit
the disc in the left
plays
compartment
disc, and then the one in the
right compartment.
MP3 CD: "READING" appears in the display
window, and then the total number of files
5
or
open the disc tray
check what discs are to be
to close the disc
playing
directly
When you press DISC 1-3 before playing a disc, the unit
will automatically start playing the selected disc.
compartment.
tracks and the
the
on
stopping.
tray.
is
MP3 file.
panel or D.SKIP
during playing or stopping.
first.
DISC 1
an
a
remote control
Press DISC 1, DISC 2
To load
play
To Go to the next discs
( Z OPEN)
into the disc tray.
The disc
point
button
release
otes
disc is entered in the disc
Press CD OPEN
3
holding .m/M >
during playback, then
to enter
the CD mode.
If
and
the remote control
on
Press the CD button
Track
a
after the current
displayed.
3
PLAY( B ) on the front panel or CD PLAY/
PAUSE ( B / X ) on the remote control
In addition, you can also play an Audio CD or MP3
CD using the NUMBER buttons.
Press
Press CD OPEN
( Z OPEN).
The CD door is closed.
.
otes
?
To Pause
Play
Press CD PAUSE
Do not
tray
panel or CD PLAY/
PAUSE ( B / X ) on the remote control during playback.
Press this button again it to resume play.
(CD X )
on
the front
?
place
at the
than
more
same
Do not
the disc
may
the unit.
push
damage
one
compact disc
on one
disc
time.
tray
to close CD
door,
as
you
To check MP3 file information
To
Stop Play
Press the INFO button
STOP( x )/CLEAR on the front panel or CD
STOP( x ) on the remote control during playback.
Press
-
will be shown in
-
To
?
?
Skip
a
Track
a
track, the player
that track. When it is
skipped
each time
If there is
the information of the MP3
no
returns to the start of
pressed again, a track
the button is pressed.
file
file, "NO ID3
display
window.
otes
?
is
This unit
can
audio titles
?
play
The MP3 file
a
CD-R
or
CD-RW that contains
MP3 files.
or
name
using English.
14
during MP3 file playback.
(Title, Artist or Album) of the MP3
the display window.
TAG" indicator will be shown in the
Press M> button to go to the next track.
When .m button is pressed once midway
through
The information
and ID3 TAG should be named
CD
Playback
To
Repeat Play
To
play
one
Press REPEAT
"
once
1" appears
-
To
play
one
Press REPEAT
"
on
repeatedly
the
disc
To
play
"
To cancel
the
on
window.
on
once more
display
PROGRAM/MEMO
display
window.
2
Press REPEAT several times until
repeat indicator
3
Program repeat play
Press REPEAT
once
during
-"
1" appears on the
(One track repeat)
?
Press REPEAT
-"
(All
the discs and
can
contain up
on
the front
panel
or
the remote control in the
on
Press DISC SKIP
(DISC1/2/3)
on
or
DISC DIRECT PLAY
the front
panel
or
D.SKIP
on
the
remote control to select the disc.
repeat play
disappears.
?
on
stop mode.
repeatedly
during playback.
the
Press PROG./MEMO.
1
window.
all discs
on
arrange the order of the tracks
own program. The program
to 20 tracks.
repeatedly
ALL DISC" appears
-
can
again during playback.
all tracks
Press REPEAT
display
Program Play
You
create your
during playback.
1 DISC" appears
-
-
track
To
again during
ALL DISC" appears
program
program
display
on
the
panel
or on
on
the remote control to
select the track.
play.
window.
program
Press CD SKIP/ SEARCH .m / M>
the front
4
Press PROG./MEMO.
5
Repeat steps
6
Press
play.
display
window.
repeat)
PROGRAM/MEMO
on
on
the front
panel
or
the remote control.
1~4.
PLAY( B ) on the front panel or
( B / X ) on the remote control.
CD PLAY/
PAUSE
To check program contents
Press PROG./MEMO.
remote
-
The
control)
in the
PROGRAM/MEMO
(or
on
the
stop mode.
disc, track and program number will be displayed.
To clear program contents
Press PROG./MEMO.
remote
CLEAR
control)
on
on
the front
PROGRAM/MEMO
(or
the
on
the
stop mode. And then press
panel
or
CD
STOP( x )onthe
remote control.
To add program contents
1.
Press PROG./MEMO.
remote
(or PROGRAM/MEMO on
control) repeatedly in the program stop
the
mode until "Disc Number" blinks.
2.
Repeat steps
To
modify program
1.
Press the PROG./MEMO.
PROGRAM/MEMO
the remote
program number you
want to
2.
2~4.
control)
modify.
Repeat steps
2~4.
contents
to
(or
display
on
OPERATION
USB port
Connecting
LM-U1350/1050/550
Readable Card
SmartMedia
-
-
Card(SMC)
Compact Flash Card(CFC)
Micro Drive(MD)
Secure Digital Card(SD)
Multi Media Card(MMC)
Memory Stick(MS)
Memory Stick Pro(MS-Pro)
Compatable with : FAT12,16,32
Only use the memory cards
recommended
1
2
Plug
the USB device into the USB port of your
Press USB button
Don't
on
the front
panel.
MP3
1
Numbers of file available
?
Be
?
No
memory card while
to
sure
maximum 999 EA.
are
file in the memory card after
hard disk is supported.
save
cladding
The MP3 player requiring
supported.
installation of
a
formatting.
drive is not
To Go to the next cards
Playback
Press the USB button
on
the front
panel
to
enter the USB mode.
"CHECKING" appears in the display window, and
then the total number of files is displayed.
Press
PLAY(
PAUSE
(
Press DISC SKIP
remote control
To
)
)
on
the front
panel
or
CD PLAY/
?
the remote control
In addition, you can also play using the NUMBER
buttons.
To Pause
PLAY/ PAUSE
on
(
panel or D.SKIP
or stopping.
on
Track
a
Press M> button to go to the next track.
When .m button is
a
skipped
pressed
track, the player
once
midway
returns to the start of
pressed again,
each time the button is
a
track is
pressed.
Press the INFO button
-
The information
will be shown in
it to
resume
play.
-
If there is
during MP3 file playback.
(Title, Artist or Album) of the MP3
the display window.
the information of the MP3
no
TAG" indicator will be shown in the
Stop Play
Press STOP( x )/CLEAR on the front panel or CD
STOP( x ) on the remote control during playback.
file
file, "NO ID3
display
window.
otes
?
This unit
can
play
USB device that contains
MP3/WMA files.
?
The MP3 file
?
This
player
can
not format memory card.
?
This
player
can
not
name
and ID3 TAG should be named
using English.
16
the
To check MP3 file information
(CD ) on the front panel or CD
) on the remote control during
again
the front
on
during playing
that track. When it is
playback.
Press this button
Skip
through
.
Play
Press CD PAUSE
To
playing
Playback
?
2
a
the USB.
USB device
Basic
player
or
the memory card when
multi card reader.
or remove
by using
?
?
remove a
playing
Don't add
the USB
unit.
otes
?
?
use
USB HUB.
USB device
To
Repeat Play
To
play
one
Press REPEAT
"
To
play
one
Press REPEAT
"
once
on
repeatedly
the
disc
To
play
"
To cancel
the
on
window.
on
once more
display
repeatedly
during playback.
the
display
window.
repeat play
Press REPEAT several times
until
Press REPEAT
once
during
1" appears on the
track repeat)
program
display
Press REPEAT
-"
again during
play.
window.
ALL DISC" appears
program
repeat)
on
program
the
on
the discs and
can
contain up
display window.(All
the front
panel
or
the remote control in the
Press DISC SKIP front
D.SKIP
on
the
Press CD SKIP/ SEARCH .m/M >
on
panel
or
remote control to select the disc.
the front
panel
or on
the remote control to
select the track.
4
5
Press PROG./MEMO.
6
Press
play.
on
on
stop mode.
2
3
(One
?
PROGRAM/MEMO
repeat indicator
Program repeat play
-"
Press PROG./MEMO.
1
window.
all discs
on
arrange the order of the tracks
own program. The program
to 20 tracks.
disappears.
?
can
repeatedly
ALL DISC" appears
-
Program Play
You
again during playback.
all tracks
Press REPEAT
display
To
create your
during playback.
1 DISC" appears
-
-
track
1" appears
-
Playback
PROGRAM/MEMO
Repeat steps
on
on
the front
panel
or
the remote control.
1~4.
PLAY( B ) on the front panel or
( B / X ) on the remote control.
CD PLAY/
PAUSE
To check program contents
Press PROG./MEMO.
remote
-
The
control)
in the
PROGRAM/MEMO
(or
on
the
stop mode.
disc, track and program number will be displayed.
To clear program contents
Press PROG./MEMO.
remote
CLEAR
control)
on
on
the front
PROGRAM/MEMO
(or
the
on
the
stop mode. And then press
panel
or
CD
STOP( x )onthe
remote control.
To add program contents
1.
Press PROG./MEMO.
remote
(or PROGRAM/MEMO on the
control) repeatedly in the program stop mode
until "Track Number" blinks.
2.
Repeat steps
To
modify program
1.
Press the PROG./MEMO.
PROGRAM/MEMO
the remote
program number you
want to
2.
2~4.
control)
modify.
Repeat steps
2~4.
contents
to
(or
display
on
OPERATION
Troubleshooting
Check the
for the
following guide
possible
cause
of
a
problem
before
contacting
service.
Correction
Cause
Symptom
No power.
?
The power cord is disconnected.
?
No sound.
?
The audio cables
?
are
not connected
the power cord into the wall outlet
Plug
securely.
Connect the audio cable into the
securely.
The power of the external
ment is switched off.
?
The
?
speaker
to the wrong
The unit does not start
playback.
jacks
securely.
?
No disc
?
An
?
The disc is
or
source
?T
equip-
cable is set
tape is inserted.
disc
or
tape is inserted.
placed upside
equipment
?
Set the
connected with
speaker cable to the correct
position, then turn on the unit again by
pressing POWER.
?
Insert
a
disc disc
or
?
Insert
a
playable
disc
position.
unplayable
the
urn on
the audio cable.
down.
tape.
or
Place the disc with the
?
tape.
playback
side
down.
The disc is not
?
placed
within the
guide.
Place the disc
?
inside the
The remote control
does not work
?
The disc is
?
The remote control is not
remote
properly.
dirty.
sensor
at the
There is
an
obstacle in the
of the unit.
sensor
?
Operate the
23ft(7m).
?
Remove the obstacle.
?
Replace
unit.
?
of the
path
tray correctly
Point the remote control at the remote
?
of the unit.
The remote control is too far from the
?
the disc
Clean the disc.
?
pointed
on
guide.
remote control within about
remote control and the unit.
The batteries in the remote control
?
are
the batteries with
new ones.
exhausted.
Additional Information
5.
About MP3
?
An MP3 file is audio data
compressed by using the
layer-3 file-coding scheme. We call files
have the ".mp3" file extension "MP3 files".
unit can not read an MP3 file that has not ".mp3"
MPEG1 audio
that
?
The
6.
7.
a
nology.
WMA(Windows
compression of
MP3/WMA Disc
Microsoft audio
Media
Audio)
compression
tech-
offers double the audio
the MP3 format.
compatibility
follows:
1.
Sampling Frequency / 8 48kHz (MP3), 32 44.1
kHz (WMA)
Bit rate / 8 320kbps (MP3), 32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback MP3
files. We recommend that you use "Easy-CD
3.
4.
or
30 letters
or
less
"wma" extension
"********.WMA".
Even if the total number of files
than 1000, it will
-
-
Creator", which
-
-
creates
an
This function
to
a
ex)
ISO9660 file
system.
recognizes
disc of CD-ROM
only
on
the disc have
be shown up to 999.
If there
are
the multi session disc
are
MP3/WMA files in the first
only
according
type.
MP3/WMA file in the first session is
If there
with this unit is limited
as
2.
incorporate ".mp3"
using
or
Donotusespecialletterssuchas"/:*?"<>"etc.
more
-
?
should be named
About MULTI SESSION
About WMA
An WMA file is
names
e.g. "********.MP3"
file extension.
?
File
and must
session, the
only played.
MP3/WMA files in the whole
ses-
sion, all of the MP3/WMA files in the session are
played. If there is Audio CD in the first session,
only
the Audio CD in the first session is
played.
Specifications
MODEL
SECTION
Power
[Genral]
Power
(MW)
[Amp]
[TAPE]
(W
x
H
x
D)
273
40
Frequency response
Signal-to-noise ratio
Dynamic range
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
panel
of the unit.
50W
45W
6.3
6.3
kg
x
366
Designs
kg
70 dB
87.5
108.0 MHz
-
or
65
-
74
MHz,
-
108.0 MHz
60/55 dB
10000 Hz
60
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Output Power
T. H.D
0.5 %
Frequency Response
Signal-to-noise ratio
Tape Speed
42
Wow Flutter
0.25
F.F/REW Time
120
Frequency Response
Signal to Noise Ratio
Channel Separation
40 dB
Erase Ratio
55
-
450 kHz
35 dB
120
2000 Hz
-
130W+130W
100W+100W
50W+50W
20000 Hz
-
75 dB
4.75 cm/sec
125
%(MTT -111, JIS-WTD)
(C-60)
sec
8000Hz
-
dB(P/B) / 45 dB(R/P)
dB(MTT-5511)
50
3
Type
Impedance
Frequency Response
Way
3
Speaker
LMS-U1050
3
Way
4Ω
50
Sound Pressure Level
-
Input Power
Max. Input Power
NetDimensions(WxHxD)
Net Weight
subject
(1m)
130 W
260 W
227X327X312mm
5kg
to
change
3
Speaker
LMS-W550/U550
2
Way
4Ω
20000 Hz
86 dB/W
Rated
are
87.5
10.7 MHz
522-1620kHzor520-1720kHz
specifications
REF NC
18000 Hz
-
70 dB
Frequency Response
and
kg
mm
LMS-U1350
[Speakrs]
LM-W550A/D/X
LM-U550A/D/X
6.3
326
x
LM-U1050A/D/X
60W
consumption
External dimensions
FM
AM
Refer to the back
supply
Mass
[CD]
[Tuner]
LM-U1350A/D/X
without notice.
55
-
20000 Hz
85 dB/W
2
Speaker
8Ω
(1m)
56
-
20000 Hz
85 dB/W
(1m)
100 W
50W
200 W
100 W
227X327X272mm199X326X232mm
4.2
kg
2.78
kg
P/NO
:
3834RH0084R
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement