DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 1
ENGLISH
DR385
P/NO : MFL56778736
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book
case or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings
should be never be blocked by placing the product on a bed, sofa, rug or other
similar surface. This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to.
CAUTION:CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WEN OPEN AND INTERLOCKS
DEFEATED AVOID EXPOSER TO THE BEAM.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully
and retain it for future reference. Should the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible laser radiation when open. DO NOT STARE INTO BEAM.
2
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the
apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain. Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could
result in electric shock or fire. Periodically examine the cord of your appliance,
and if its appearance indicates damage or deterioration, unplug it, discontinue
use of the appliance, and have the cord replaced with an exact replacement
part by an authorized service center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance. To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure that the plug is easily
accessible.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
This product is manufactured to comply with EMC Directive
2004/108/EC and Low Voltage Directive 2006/95/EC.
European representative:
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, The Netherlands
(Tel : +31-036-547-8940)
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 3
Copyrights
Recording equipment should be used only for lawful copying and you are
advised to check carefully what is lawful copying in the area in which you are
making a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the rights owner.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 625p DVD RECORDER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
Manufactured under license from Dolby Laboratories. Dolby and the doubleD symbol are trademarks of Dolby Laboratories.
3
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 4
Contents
Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-11
Auto setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Using the Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Adjust the SETUP settings . . . . . . . . . . . . . . . . . . . . . . .13-16
Displaying disc Information . . . . . . . . . . . . . . . . . . . . . . .17-18
Play a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19
Playing a DivX® movie files . . . . . . . . . . . . . . . . . . . . . . . . . .20
Listening to a music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Viewing a photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23-24
Editing a title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-27
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29-30
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
4
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 5
Before you start
Recordable and Playable discs
This unit can play and record all widely-used DVD types. The table below shows some specific compatibility differences depending on the disc types.
DVD-R
Symbol used in
this manual
-R
DVD-RW
-RWVR
-RWVideo
DVD+R
DVD+RW
+R
+RW
Logos
Re-Writable
Formatting Mode
(new discs)
Editing
Play on other
players
Recommended
discs
No
Yes
No
Yes
Video mode
Video mode
Auto
Auto
Limited
Yes
Limited
Yes
The player must compatible with corresponding media
and the media has to be finalized.
Mitsubishi(8x,16x)
Mitsubishi(4x)
Mitsubishi(8, 16x)
Mitsubishi(4x)
That’s (8x,16x)
Verbatim(4x)
Ricoh(8, 16x)
SONY(2.4x)
SONY (6x)
JVC(4x)
SONY (16x)
Verbatim(2.4x)
Maxell(4x)
Ricoh(2.4x, 4x)
Playable discs
The table below shows the file formats and media types that this unit can playback.
Symbol used in
this manual
DVD
Audio CD
DVD
ACD
Discs such as movies
that can be
purchased or rented.
Music CDs or CD-R/RWs
in music CD format that
can be purchased
Data disc (DivX, JPEG, MP3 or WMA)
DivX
JPEG
MP3
WMA
Logos
Characteristics
Discs that contain DivX, JPEG, MP3 or WMA
files.
5
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 6
Notes on discs
Restrictions on copying
Depending on the conditions of the recording equipment or the CD-R/RW (or
DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be
played on the unit.
Some video material is copy-once protected: Such material cannot be copied to
DVD. You can identify copy-once protected material during playback by displaying disc information on-screen.
Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
NTSC format signal is not recorded correctly with this unit.
Video signals in SECAM format (from the built-in TV tuner or from the analog inputs) are recorded in PAL format.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing
so may result in malfunctions.
Depending on the recording software & the finalization, some recorded discs
(CD-R/RW or DVD±R/RW) may not be playable.
DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal
computer or a DVD or CD Recorder may not play if the disc is damaged or
dirty, or if there is dirt or condensation on the Unit’s lens.
If you record a disc using a personal computer, even if it is recorded in a
compatible format, there are cases in which it may not play because of the
settings of the application software used to create the disc. (Check with the
software publisher for more detailed information.)
This unit requires discs and recordings to meet certain technical standards
in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these
require certain pre-existing conditions (see above) to ensure compatible
playback.
Customers should note that permission is required in order to download
MP3 / WMA files and music from the Internet. Our company has no right to
grant such permission. Permission should always be sought from the copyright owner.
6
About the
Symbol Display
“
” may appear on your TV display during operation and indicates that the
function explained in this owner’s manual is not available on that specific media.
Regional Codes
This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play.
If you try to play a DVD with a different regional code from the unit, the message “Incorrect region code. Can’t play back” appears on the TV screen.
Remote Control Operation
Point the Remote Control at the remote sensor and press the buttons.
Remote Control Battery Installation
Remove the battery cover on the rear of the Remote Control, and insert R03
(size AAA) battery with 3 and # matched correctly.
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 7
Remote control
a
a POWER: Switches the unit ON or OFF.
OPEN/CLOSE: Opens and closes the disc tray.
0-9 numerical buttons: Selects numbered options in a
menu.
TV Control Buttons: You can control the sound level, input
source, and power switch of your TV.
AV/INPUT: Changes the input source (Tuner, AV1-3).
b
d
b
SCAN (m / M): Search backward or forward.
SKIP (. / >): Go to next or previous chapter/track/file.
PLAY (N): Starts playback.
STOP (x): Stops playback or recording.
PAUSE/STEP (X): Pause playback or recording temporarily.
c
c
HOME: Accesses or removes the HOME menu.
MENU/LIST: Accesses menu on a DVD disc. Switches
between Title List-Original and Title List-Playlist menu.
DISPLAY: Accesses On-Screen Display.
RETURN (O): Removes the on-screen displays.
b / B / v / V (left/right/up/down):
Used to navigate on-screen displays.
(ENTER): Acknowledges menu selection.
PR/CH (+/-): Scans up or down through memorized
channels.
AUDIO ( ): Selects an audio language or audio channel.
SUBTITLE ( ): Selects a subtitle language.
ZOOM: Enlarges video image.
SETUP: Accesses or removes the Setup menu.
d
REC (z): Starts recording. Press repeatedly to set the
recording time.
REC MODE: Selects the recording mode.
THUMBNAIL: Selects a thumbnail picture.
CHP. ADD: Inserts a chapter marker when playing/recording.
PLAY MODE: Selects a play mode.
CLEAR: Removes a track number on the Program List.
TITLE: Displays the disc’s Title menu, if available.
TV/DVD: Press to switch between ‘TV mode’, in which you
get the picture and sound from the TV’s tuner, and ‘DVD
mode’, in which you get picture and sound form this unit.
Setting up the remote to control your TV
You can operate your TV with the supplied remote control.
If your TV is listed in the table below, set the appropriate
manufacturer code.
While holding down TV POWER button, and press the manufacturer code for your TV with the numerical buttons (see
the table below). Release the TV POWER button to complete setting.
Manufacturer
LG / GoldStar
Zenith
Samsung
Sony
Hitachi
Code Number
1 (Default), 2
1, 3, 4
6, 7
8, 9
4
Depending on your TV, some or all buttons may not function on
the TV, even after entering the correct manufacturer code.
When you replace the batteries of the remote, the code number
you have set may be reset to the default setting. Set the appropriate code number again.
7
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 8
Main Unit
a
b
c
d
e
f
g
h
i
j
a 1 / I (POWER button)
Switches the unit ON or OFF.
f N (PLAY)
Starts playback.
b Disc Tray
Insert a disc here.
g x (STOP)
Stops playback or recording.
c OPEN/CLOSE (Z)
Opens or closes the disc tray.
h z (REC)
Starts recording. Press repeatedly to set the recording time.
d Remote Sensor
Point the remote control here.
i P/S (Progressive Scan)
Switches the progressive mode.
576i(OFF), 576p(ON)
e Display window
Shows the current status of the unit.
REC: The unit is recording.
: Indicates when the unit is in timer recording or a timer recording is programmed.
: Indicates clock, total playing time, elapsed time, title number,
chapter/track number, channel, etc.
8
j AV IN 3 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external source (Audio system, TV/
Monitor, VCR, Camcorder, etc.).
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 9
Hooking up the unit
c SCART connection
Connect one end of the scart
cable into the AV1 SCART
jack on the unit and other
end to the
corresponding in jack on
your TV.
You can get Audio and Video
signals together with this
connection.
d Power cord connection
Connect the mains lead to
the AC IN terminal on the
unit. Then plug the power
cord into the mains.
a Antenna connection
Connect the Terrestrial
TV antenna to the
ANTENNA IN jack on
the unit.
b Antenna connection to
your TV
Connect one end of the RF
cable to ANTENNA OUT jack
on the unit and other end to
ANTENNA IN jack on your
TV.
Passes the signal from the
ANTENNA IN jack to your
TV/monitor.
9
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 10
Hooking up the unit - more you can do
Component connection
Connect one end of the component(Y PB PR) cable to the COMPONENT OUTPUT jack on the unit and other end to the COMPONENT INPUT jack on your
TV.
Connect one ends of the audio cables (red and white) to the analog AUDIO
OUTPUT jack on the unit and other ends to the AUDIO INPUT jack on your TV.
This recorder does not perform internal (2 channel) decoding of a DTS sound
track. To enjoy DTS multi channel surround, you must connect this recorder to a
DTS compatible receiver via one of this recorder’s digital audio outputs.
Connecting to the AV IN 3 Jacks
Connect the input jacks (AV IN 3) on the unit to the audio/video out jacks on
your accessory component using audio/video cables.
If your television is a high-definition or “digital ready” television, you may take
advantage of the unit’s progressive scan output for the highest video resolution
possible. If your TV does not accept the Progressive Scan format, the picture
will appear scrambled with the progressive signal.
Set the resolution to 576p using P/S button on the front panel for progressive
signal.
Digital audio connection
Connecting to an amplifier/receiver, Dolby Digital/MPEG/DTS decoder or other
equipment with a digital input.
Connect one end of the digital audio cables (COAXIAL) to the digital audio output jack (COAXIAL) on the unit and other end to the digital audio input jack
(COAXIAL) on your amplifier.
10
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 11
Connecting a PAY-TV/Canal Plus Decoder
You can watch or record PAY-TV/Canal Plus programmes if you connect a
decoder (not supplied) to the unit. Disconnect the unit’s mains lead from the
mains when connecting the decoder. You do not need to turn on the unit to view
the signals from the connected tuner on your TV.
Pictures containing copy protection signals that prohibit any copying cannot
be recorded.
If you pass the unit signals via the VCR, you may not receive a clear image
on your TV screen.
Be sure to connect your VCR to the unit and your TV in the order shown
below. To watch video tapes, watch the tapes through a second line input on
your TV.
When you record to a VCR from this unit, do not switch the input source to
TV by pressing the TV/DVD button on the remote.
If you are using a B Sky B tuner, be sure to connect the tuner’s VCR SCART
jack to the AV2 DECODER jack.
If you disconnect the unit’s mains lead, you will not be able to view the signals from the connected VCR or tuner.
To watch or record PAY-TV/Canal
Plus programmes, set [AV2
Connection] option to [Decoder]
(see page 14) and set the program’s [Decoder On/Off] option to
[On] on the Setup menu (page 12).
SCART AV
If you disconnect the unit’s mains
lead, you will not be able to view
the signals from the connected
decoder.
Connecting to the AV2 DECODER jack
Connect a VCR or similar recording device to the AV2 DECODER jack of this
unit. You do not need to turn on the unit to view the signals from the connected
tuner on your TV.
To watch or record the source from
AV2 DECODER jack, set [AV2
Connection] option to [Other Device]
(see page 14).
11
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 12
Auto setup
When the first time to turn on the unit, the initial setup
wizard sets the language, clock and channels
automatically.
ON REMOTE
1 Turn on the unit
The initial setup wizard appears on the screen.
POWER
2 Choose a language:
vV
3 Select the chosen language:
ENTER
4 Check the antenna and go to the next step:
ENTER
5 Choose a country you are using the unit:
vV
6 Select the [Start] and starts channel scan:
B ENTER
7 Set the clock:
v V b B, ENTER
8 Close the initial setup:
ENTER
Auto setup - more you can do
Adjust the programmed channels
Press HOME, then use b B to select [SETUP] option. Press ENTER while
[Start] is selected. The SETUP menu appears on the screen. Select the
[Program Edit] on the second level options then press B to move to the third
level. Press ENTER while [Edit] option is selected. The channel editing screen
appears on the screen.
Select which channel you would like to edit and press ENTER. An option menu
appear on the left side of the screen.
[Program Edit]: Change the settings of a channel manually.
[Station Rename]: change a name of the selected channel.
12
[Move]: Change the order of the channels and which numerical button they
correspond to.
[Delete]: Delete the selected channel from programmed channel list.
[Decoder On/Off] Sets the channels for the decoder. You need this setting to
watch or record PAY-TV/Canal Plus programmes. Press ENTER so [Decoder]
appears on the display. Press ENTER again to turn off the setting.
Editing a channel
You can change the settings of prgrammed channel by selecting [Program Edit]
option on the left side of the channel editing screen.
[PR]: Indicates the selected channel position.
[Seek]: Searches for a channel automatically. Searching stops when the unit
tunes in a channel.
[Ch.] Changes the channel number.
[MFT] Fine tunes the channel to obtain a clearer picture.
[PAL/SECAM] Changes TV signal system (PAL or SECAM).
[OK]: Confirm the settings and return to the channel list menu.
Setting the AV1 Decoder
Sets the AV1 scart jack for inputting encoded video signals. This option sets the
unit to output the encoded signal from AV1 scart jack to AV2 (DECODER) scart
jack for decoding. The decoded signal is then input back through the AV2
(DECODER) jack so you can record or watch PAY-TV/Canal Plus programs.
Press AV/INPUT once while the channel editing screen appears. Press ENTER
to turn on the option and press ENTER again to turn off. The [DECODER]
appears on the screen when this option is turned on.
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 13
MUSIC
Using the Home Menu
ON REMOTE
DISC – Displays [Music List] menu, which shows music files or audio tracks on
the disc. (page 21)
1 Displays the HOME menu:
HOME
Easy Menu
2 Select a main option:
bB
Disc Manager – Displays the disc settings menu. (page 16)
Rec Mode – Displays [Record Mode Set] option in the SETUP Menu. (page 16)
3 Select a sub option:
vV
4 Execute the selected option
ENTER
5 Exit the HOME menu:
HOME
Adjust the SETUP settings
ON REMOTE
1 Displays the HOME menu:
HOME
2 Select the [SETUP] option:
bB
3 Select the [Start] option:
ENTER
4 Select a desired option on the first level:
vV
5 Move to second level:
B
6 Select a desired option on the second level:
vV
Setup
7 Move to third level:
B
Start – Displays SETUP menu. (page 13)
8 Adjust or confirm the setting:
v V, ENTER
TV
9 Go back to the previous level:
b
Using the Home Menu - more you can do
Auto Ch. Scan – Displays [Auto Programming] option in the SETUP Menu.
(page 14)
PR Edit – Displays [Program Edit] option in the SETUP Menu. (page 12)
Timer Record – Displays [Timer Record] menu. (page 23)
MOVIE
DISC
– Displays [Title List] menu, which shows recorded titles on the disc. (page
24)
– Displays [Movie List] menu, which shows DivX® movie files on the disc.
(page 20)
– Plays DVD-Video disc (page 18).
PHOTO
First level
Second level
Third level
DISC – Displays [Photo List] menu, which shows photo files on the disc. (page
22)
13
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 14
Adjust the SETUP settings - more you can do
Adjust the general settings
Progressive Scan (For Component Video connections) – If your TV accepts
progressive format signals, you will enjoy accurate color reproduction and high
quality image by selecting [ON] option. If your TV does not accept progressive
format signals, select [OFF] option. If you are not sure about progressive format
compatibility, check the owner’s manual that came with your TV.
If your TV is incompatible with progressive format signals and you set the
[Progressive Scan] option to [ON], you will not see a picture properly. Remove
the disc in the tray and press and hold STOP for five seconds to set
[Progressive Scan] option to [OFF].
AV2 Connection – You can connect a decoder or the other device to the
AV2(DECODER) jack on the rear panel.
Auto Programming – This option automatically scans and sets the available
channels.
[Country]: Select a country where you operate this unit. If the country that
you want to set is not listed, select [Others].
[Start]: Start the channel scanning.
Program Edit– This option allows you to add channels and edit preset
channels.
[Edit]: Displays the screen which show preset channel list and channel
editing options. (page 12)
Clock Set– The clock must be set in order to use [Timer record].
TV Aspect – Selects the aspects ratio of the connected TV.
[4:3 Letter Box]: Select this when connecting to a standard 4:3 screen TV
and prefer the wide picture with bands on the upper and lower portions of the
screen.
[4:3 Pan Scan]: Select this when connecting to a standard 4:3 screen TV and
prefer the wide picture on the entire screen cuts off the portions that do not
fit.
[16:9 Wide]: Select this when connecting to a wide-screen TV.
14
[Decoder]: Select this when you connect a PAY-TV or Canal Plus decoder to
the AV2(DECODER) jack on the unit.
[Other Device]: Select this when you connect a VCR or similar recording
device to the AV2(DECODER) jack on the unit.
Video output format – Select an option according to the TV connection type.
[YPbPr]: When your TV is connected to the COMPONENT OUTPUT jacks on
the unit.
[RGB]: When your TV is connected to the SCART jack on the unit.
Power Save mode – Selects whether this unit is in power save mode when the
power is turned off. This option is not available when a timer recording is set.
[ON]*1: The front panel display is off and only signals arriving at the antenna
input are passed through when the unit is turned off.
[OFF]: Turns off the [Power Save Mode].
*1 If you turns off the unit while receiving encoded signals, the power save mode
does not work
Factory Set – You can reset the unit to all its factory settings. Some options
cannot be reset (Rating, Password, and Area Code). The auto setup menu
appears on the screen after the factory settings.
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 15
Adjust the language settings
Sample Freq. (Frequency) – Selects the sampling frequency of the audio
signal.
[48 kHz]: The audio signals are always converted to 48 kHz.
[96 kHz]: The audio signals are output in their original format.
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Adjust the lock settings
Display Menu – Select a language for the Setup menu and on-screen display.
Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 28. If
you make a mistake while entering number, press CLEAR repeatedly to
delete numbers one by one then correct it.
[OFF] (for Disc Subtitle): Turn off Subtitle.
Adjust the audio settings
To access the DVD Rating, Password or Area Code options, you must enter the
4-digit password. If you have not yet entered a password you are prompted to
do so. Enter a 4-digit password. Enter it again to verify. If you make a mistake
while entering number, press CLEAR repeatedly to delete numbers one by one
then correct it.
If you forget your password, you can reset it. Displays the SETUP menu. Input
‘210499’ and select [OK] to confirm. The password has now been cleared.
Rating – Select a DVD rating level. The lower the level, the stricter the rating.
Select [No Limit] to deactivate the rating.
Set Password – Changes or deletes the password.
[Change]: Enter the new password twice after entering the current password.
[Delete]: Delete the current password after entering the current password.
Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when
using the DIGITAL AUDIO OUTPUT jack.
[Bitstream] – Select this when you connect this unit’s DIGITAL AUDIO
OUTPUT jack to an audio component with a built-in Dolby Digital, DTS or
MPEG decoder.
[PCM] (for Dolby Digital / MPEG) – Select this when you connect this unit’s
DIGITAL AUDIO OUTPUT jack to an audio component without a built-in
Dolby Digital or MPEG decoder.
[Off] (for DTS) – Select this when you connect this unit’s DIGITAL AUDIO
OUTPUT jack to an audio component without a built-in DTS decoder.
Area code – Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. See the Area Codes on page 28.
15
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 16
Adjust the recording settings
Finalize – Finalizing is necessary when you play disc recorded with this unit on
other DVD equipment. How long finalization takes depends on the disc condition, recorded length and number of titles.
[Finalize]: The [Finalize] menu appears. The unit starts finalizing after
confirmation.
[Unfinalize]: The finalized DVD-RW discs can be unfinalized after confirming
on the [Unfinalize] menu. After unfinalizing, the disc can be edited and rerecord.
Before finalizing, check the characteristics between the disc type in the table
below.
Record Mode Set – Select the picture quality for recording from XP, SP, LP, EP
or MLP. See recording time of each mode on page 30.
[XP]: Highest picture quality.
[SP]: Standard picture quality.
[LP]: Slightly lower picture quality than [SP] mode.
[EP]: Low picture quality.
[MLP]: The longest recording time with the lowest picture quality.
Auto Chapter – When DVD recording, chapter markers are added automatically in every specified interval (5 or 10 min.).
Adjust the disc settings
The finalized DVD-RW discs can be unfinalized
so that the disc can edit or record again.
-RW
+R
+RW
-R
Once you finalize a disc, you can not edit or
record anything on the disc.
Discs are automatically finalized when removed from
the unit.
Disc Label – This function allow you to change the default disc name to something more descriptive. This name appears when you load a disc and when you
display disc information on-screen. The keyboard menu appears by pressing
ENTER while [Edit] is selected.
Disc Protect – This function allow you to protect discs from accidental record,
erasure and editing by setting this option to [ON]. The DVD-R and Video mode
formatted DVD-RW are not available to protect.
DivX Reg. Code– We provide you with the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase videos using the DivX®
VOD service. For more information, visit www.divx.com/vod.
Press ENTER when [Enter] icon is highlighted and you can view the registration
code of the unit.
Initialize – You can Initialize a DVD by pressing ENTER while [Start] is selected. The [Initialize] menu appears. The unit starts formatting after
confirmation. You can select a mode between VR and Video for DVD-RW discs.
The everything recorded on the DVD will be erased after formatting.
If you load a completely blank disc, the unit will initialize the disc automatically.
See “Formatting mode (new disc)” on page 5 for more information.
16
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 17
Moving to another title DVD ALL
Displaying disc information
ON REMOTE
1 Play the disc loaded on the unit
PLAY
When a disc has more than one title, you can move to another title.
Press DISPLAY twice during playback then use v / V to select the title icon.
Then, press the appropriate numbered button (0-9) or b / B to select a title
number.
2 Displays current status of playback:
DISPLAY
3 Displays the playback menu:
DISPLAY
Starting playback from selected time DVD ALL
vV
Press DISPLAY twice during playback. The time search box shows the elapsed
playing time. Select the time search box and then input the required start time
in hours, minutes, and seconds from left to right. For example, to find a scene
at 2 hours, 10 minutes, and 20 seconds, enter "21020" and press ENTER.
If you enter the wrong numbers, press b / B to move the under bar (_) to the
wrong number. Then enter the correct numbers.
4 Select an item:
5 Adjust the playback menu settings:
bB
6 Exit the disc playback menu
DISPLAY
Displaying disc Information - more you can do
DivX
Adjusting playback menu item
Selecting a subtitle language DVD
You can select an item by pressing vV and change or select the setting by
pressing b B.
During playback, press DISPLAY twice to display the playback menu. Use v V
to select the subtitle option then use b B to select desired subtitle language.
OR
During playback, press SUBTITLE then use b B to select desired subtitle language.
a
b
c
d
e
f
g
DivX
Watching from a different angle DVD
If the disc contains scenes recorded at different camera angles, you can change
to a different camera angle during playback.
During playback, press DISPLAY twice to display the playback menu. Use v V
to select the angle option then use b B to select desired angle.
Selecting a sound mode DVD ALL
a
b
c
d
e
f
g
Current title/track/file / Total number of titles/tracks/files
Current chapter / total number of chapters
Elapsed playing time
Selected audio language or audio channel
Selected subtitle
Selected angle / Total number of angles
Selected sound mode
This unit can produce a 3D Surround effect, which simulates multi-channel
audio playback from two conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-channel audio from a home
theater system.
During playback, press DISPLAY twice to display the playback menu. Use v V
to select the sound option then use b B to select desired sound mode
(3D SUR. or NORMAL).
17
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 18
Displaying information while watching TV
During viewing the TV, Press DISPLAY to display the information displayed
on-screen.
a
b
c
Play a disc
ON REMOTE
1 Open the disc tray:
Z)
OPEN/CLOSE (Z
2 Insert a disc:
-
3 Close the disc tray:
Z)
OPEN/CLOSE (Z
4 Adjust the disc menu settings:
v V b B, ENTER
A disc menu may not appears on the screen
depending on the disc.
5 Starts playback:
N)
PLAY (N
6 Stops playback:
x)
STOP (x
d
a
b
c
d
Indicates
Indicates
Indicates
Indicates
disc name and format.
the record mode, free space, and elapsed time progress bar.
channel number, and station name received by the tuner.
current date and time.
Play a disc - more you can do
Playing a disc that contains a menu DVD
The menu screen may be displayed first after loading a DVD which contains a
menu.
Use the b / B / v / V buttons to select the title/chapter you want to view, then
press ENTER to start playback. Press TITLE or MENU/LIST to return to the
menu screen.
Skip to the next/previous chapter/track/file
DVD ALL
ACD
MP3
WMA
DivX
Press SKIP (>) to move to the next chapter/track/file.
Press SKIP (.) to return to the beginning of the current chapter/track/file.
Press SKIP (.) twice briefly to step back to the previous chapter/track/file.
18
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 19
Pause a playback
Repeating a specific portion (A-B) DVD ALL
Press PAUSE/STEP (X) to pause playback. Press PLAY (N) to continue playback.
Press PLAY MODE to select [A-] at the beginning of the portion you wish to
repeat and press ENTER at the end of the portion. Your selected portion will be
repeated continually. You cannot select a portion less than 3 seconds.
To return to normal playback, press PLAY MODE repeatedly to select [OFF].
Frame-by-Frame playback DVD ALL
Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.
You can advance or back up the picture frame-by-frame by pressing b / B
repeatedly during PAUSE mode.
Fast forward or fast reverse DVD ALL
ACD
DivX
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the various playback speed by pressing SCAN (m or M)
repeatedly. Press PLAY ( N) to continue play at normal speed.
Hearing a different audio DVD ALL
DivX
Press AUDIO then press b or B repeatedly to hear a different audio language,
audio track or encoding method.
Watching a enlarged video image
ACD
DVD ALL
During playback or pause mode, press ZOOM repeatedly to select zoom mode.
You can move through the zoomed picture using vVb B buttons. Press CLEAR
to exit.
Last Scene Memory DVD
This unit memorizes last scene from the last disc that is viewed. The last scene
remains in memory even if you remove the disc from the player or switch off the
unit. If you load a disc that has the scene memorized, the scene is automatically recalled.
Slow down the playing speed DVD ALL
While playback is paused, press SCAN(bb or BB) to slow down forward or
reverse playback. You can change the various playback speed by pressing
SCAN (m or M) repeatedly. Press PLAY ( N)to continue play at normal
speed.
Viewing the Title menu DVD
Press TITLE to displays the title menu or disc menu. If the current DVD title has
a menu, the title menu appears on the screen. Otherwise, the disc menu may
appears.
Playing repeatedly DVD ALL
ACD
MP3
WMA
Press PLAY MODE repeatedly to select an item to be repeated. The current
title, chapter, folder or track will be played back repeatedly. To return to normal
playback, press PLAY MODE repeatedly to select [Off].
19
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 20
Displaying movie file information
Playing DivX® movie files
Press DISPLAY to show file information on the highlighted file in the movie list.
ON REMOTE
1 Displays the HOME menu:
HOME
2 Selects a [MOVIE] option:
bB
3 Selects an option that contains DivX® file:
v V, ENTER
4 Selects a movie file from the menu:
vV
5 Plays the selected movie file:
PLAY
6 Stops the playback:
STOP
Playing a DivX® movie files - more you can do
Movie List menu options
Select which file you would like to play from the menu and press ENTER. An
options menu appear on the left side of the screen.
Divx file requirement
Available resolution size: 720x576 (W x H) pixel
DivX® file extensions: “.avi”, “.divx”
Playable DivX® subtitle: “.smi”, “.srt”, “.sub (Micro DVD, Subviewer 1.0/2.0)”,
“.txt (TM player, DVD subtitle system)”, “.ssa”
Playable Codec format: “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”
Playable Audio format: “AC3”, “MP3”
Sampling frequency: within 8-48 kHz (MP3)
Bit rate: within 8 - 320kbps (MP3)
CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660 (UDF Bridge format)
Maximum Files/Folder: Less than 2,000
Notes on DivX® format
[Play]: Starts playback the selected file.
[Open]: Opens the folder and a list of files in the folder appears.
Notice for displaying DivX® subtitle
If the subtitle does not display properly, press PAUSE/STEP when the subtitle
appears. Then press and hold SUBTITLE about 3 seconds to display the
language code menu. Use b / B to change the language code until the subtitle
is displayed properly. Press PLAY (N) to continue playback.
20
The DivX® subtitle file name has to be identified with the DivX® file name to
be display on the unit.
If the number of the screen frame is over 29.97 frames per second, this unit
may not operate normally.
If the video and audio structure of DivX® file is not interleaved, returns to the
menu screen.
If there is impossible code to express in the DivX® file name, it may be displayed as “*” mark.
This unit does not support the DivX® file that is recorded with GMC (Global
Motion Compensation).
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 21
Playing musics in random order
Listening to a music
ON REMOTE
When you select the [RANDOM] option on the Music List menu then press
ENTER, the unit automatically begins random playback and “RANDOM”
appears on the menu screen. To return to normal playback, select [Random]
option again then press ENTER.
1 Displays the HOME menu:
HOME
2 Select a [MUSIC] option:
bB
3 Selects an option that contains music:
v V, ENTER
File extensions: “.mp3”, “.wma”.
4 Selects a music from the menu:
vV
Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)
5 Plays the selected music:
PLAY
Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)
6 Stops the playback:
STOP
CD-R Format: ISO 9660 and JOLIET.
Listening to a music - more you can do
MP3/WMA audio file requirement
DVD±R/RW Format: ISO 9660 (UDF Bridge format)
Maximum Files/Folder: Less than 2,000
Music List menu options
Select which file/track you would like to play from the menu and press ENTER.
A menu appears on the left side of the screen.
Audio CD
MP3/WMA
[Play]: Starts playback the selected file/track.
[Random]: Starts or stops random playback.
[Open]: Opens the folder and a list of files in the folder appears.
Displaying MP3/WMA file information
Press DISPLAY while the file you want to show the file information is selected.
The unit shows the ID3-Tag information of the file. If the file does not have
ID3-Tag information, [ID3-Tag: Not checked] appears on the screen.
21
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 22
Viewing photo files as a slide show
Viewing a photo
ON REMOTE
To slide show photos in the [Photo list], select the [Slide Show] option on the left
side of the screen then press ENTER, The [Slide Show] menu appears on the
screen. Set the [Speed] option then press ENTER while [Start] option is selected. The unit starts slide show as you set on the menu.
1 Displays the HOME menu:
HOME
2 Selects a [PHOTO] option:
bB
3 Selects an option that contains photo file:
v V, ENTER
4 Selects a photo from the list:
vVbB
Pause a slide show
5 Displays the selected photo in full screen:
PLAY
6 Returns to the Photo List:
STOP
Press PAUSE/STEP to pause a slide show. Press PLAY to continue the slide
show.
Viewing a photo - more you can do
[Speed] option:
Sets the Slide Show speed to [Slow], [Normal], or [Fast].
Photo file requirement
File extension: “.jpg”
Photo size: Less than 4MB recommended
Photo List menu options
CD-R Format: ISO 9660 and JOLIET.
Select which file you would like to show from the menu and press ENTER.
A menu appears on the left side of the screen.
DVD±R/RW Format: ISO 9660 (UDF Bridge format)
Maximum Files/Folder: Less than 2,000
Notes on JPEG file
[Full Screen]: Shows the selected file in full screen.
[Open]: Opens the folder and a list of files in the folder appears.
[Slide Show]: Displays the [Slide Show] menu.
Skip to the next/previous photo
Press SKIP (. or >) to view the previous/next photo while displayed in full
screen.
Rotate a photo
Use vV to rotate the photo while displayed in full screen.
22
Progressive and lossless compression JPEG image files are not supported.
Depending on the size and number of the JPEG files, it may take several
minutes to read the contents of the media.
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 23
Recording
Follow the instruction below to record a TV channel or
other source. The recording continues until the media
is full or you stop the recording.
1 Selects a recording mode:
You can select a recording mode on the
SETUP menu. (XP, SP, LP, EP or MLP)
ON REMOTE
HOME,
v V b B,
ENTER
2 Selects a channel or source you want to record: PR/CH, AV/INPUT
3 Starts recording:
REC
4 Stops recording:
STOP
[PR]: Choose a memorized program number, or one of the external inputs
from which to record.
[Date]: Choose a date up to 1 month in advance.
[Start Time]: Set the start time.
[End Time]: Set the end time.
[Mode] Choose a recording mode (XP, SP, LP, EP, MLP or AT)
AT (Auto) mode determines how much disc time is available and switches
record mode, if necessary, to complete recording the program.
Press ENTER to set a timer recording. The “Rec OK” on the [Check] field on
the [Timer Record List] menu indicates the timer recording is programmed
correctly.
Recording - more you can do
Instant timer recording
Instant timer recording allow you to make a recording of preset length easily.
When the REC is first pressed, recording starts. Press REC repeatedly to select
a certain amount of time. Each press of REC to displays the increased recording time on-screen. You can set the instant timer recording within free space.
Setting a timer record
This unit can be programmed to record up to 16 timer recording within a month.
The clock must be set correctly before setting a timer record.
Make sure that you load a recordable disc for DVD recording and press
POWER to switch your unit to Standby. If you do not switch to standby, the
timer record function will not work.
Canceling a timer record
You can cancel a timer record before the timer recording actually starts. Select
a timer recording that you want to cancel on the [Timer Record List] menu and
press CLEAR to confirm.
Press HOME and select [TV] option. Press v V to select the [Timer Record]
and press ENTER to display [Timer record List] menu. Use v V to select [New]
and press ENTER to display [Timer Record] menu. Adjust the each field using
v V b B.
23
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 24
Timer Recording Troubleshooting
Even though the timer is set, the unit will not record when:
– There is no disc loaded.
– A non-recordable disc is loaded
– [Disc Protect] option is set to [ON] in the Setup menu. (see page 16)
– Power is turned on.
– There are already 99 titles (DVD-RW, DVD-R), 49 titles (DVD+R,
DVD+RW) recorded on the disc.
You cannot enter a timer program when:
– A recording is already underway.
– The time you’re trying to set has already passed.
– There are already 16 timer programs set.
If two or more timer programs overlap:
– The earlier program takes priority.
– When the earlier program finishes, the later program starts.
– If two programs are set to start at exactly the same time, the program
entered first takes priority.
Recording From an external inputs
You can record from an external component, such as a camcorder or VCR,
connected to any of the recorder’s external inputs.
Each press of the AV/INPUT changes the input source as described below.
Make sure that the component you want to record from is connected properly to
the unit before recording an external source.
Tuner: Built-in tuner
AV1: AV1 scart jack mounted on back panel
AV2: AV2 DECODER scart jack mounted on back panel
AV3: AV IN 3 (VIDEO, AUDIO (L/R)) mounted on the front panel
Editing a title
ON REMOTE
Using the Title list menu, you can edit video contents.
1 Displays a [Title List] menu:
MENU/LIST
2 Selects a title you want to edit:
vVbB
3 Displays an editing menu:
ENTER
The options are differ depending on the media type.
4 Selects a menu option:
v V b B, ENTER
5 Exit the [Title List] menu:
RETURN
Editing a title - more you can do
About title list menu
Press MENU/LIST to display the Title List menu. Playback should be stopped
when you do this. You can also access it using HOME menu, select [MOVIE]
option then select [DISC] option and press ENTER. If you are editing a VR
mode disc, press MENU/LIST to switch between Original and Playlist menu.
a
b
d
e
f
c
a Current media
b Indicates the record mode, free space, and elapsed time progress bar.
c Menu options: To display menu option, select a title or chapter then press
ENTER. The options displayed differ depending on the disc type.
d Currently selected title.
e Thumbnail
f Shows the title name, recorded date, and recording length.
24
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 25
Before editing
Chapter search -RWVR
This unit offers various edit options for various disc types. Before you edit,
check the disc type, and select the option available for your disc.
You can select the start of a title by searching a chapter. Select a title that you
want to search and press ENTER. Select [Chapter] in the [Search] option from
the menu on the left of the screen, and press ENTER to display the [Chapter
List] menu.
You can enjoy advanced edit functions with VR mode formatted DVD (DVDRW). Editing either the original recording(called the “original”), or the playback
information created from the original (called a “Playlist).
Edits made to the original titles are final. If you plan to edit a title without editing
the original title, you can create a Playlist title for editing.
A Playlist is a group of Playlist titles created from the original title for editing purpose.
Titles in the disc’s original content contain one or more chapters. When you
insert a disc’s title into the Playlist, all the chapters within that title also appear.
In other words, chapters in the Playlist behave exactly as chapters on a DVDVideo disc do. Parts are sections of Original or Playlist titles. From the Original
and Playlist menu you can add or delete parts. Adding a chapter or title to the
Playlist creates a new title made up of a section (ie., chapter) of an Original title.
Deleting a part removes part of a title from the Original or Playlist menu.
Adding chapter markers -RWVR
+RW
-RWVideo
+RW
+R
-R
Use v V b B to find the chapter you want to start playback, and press PLAY to
start playback.
Making a new PlayList -RWVR
The PlayList allow you to edit or re-edit a title or chapter without changing the
Original recordings. Use this function to add an Original title or chapter to a new
PlayList or the registered Playlist.
+R
You can create chapters within a title by inserting chapter marks at the desired
point. Press CHP. ADD at the desired point while playback or recording.
A chapter marker icon appears on the screen.
The chapter markers can be added at regular interval automatically by setting
the [Auto Chapter] option in the SETUP menu.
Changing the thumbnail -RWVR
+RW
+R
Each title displayed in the Title List menu is represented by a thumbnail picture
taken from the start of that title or chapter.
Press THUMBNAIL to make the currently displayed picture that appears in the
Title List menu.
Deleting a title or chapter
When you delete a title or chapter from the PlayList, the title or chapter in the
Original still remains. However, if you delete a chapter or title from Original, the
title or chapter deleted from the Original are also removed from PlayList.
Select an Original title or chapter that you want to put into the PlayList then
press ENTER. Select the [Playlist Add] option and then press ENTER to display
the [Select PlayList] menu. Choose a PlayList-title that you want to put the
selected Original title or chapter to, or select the [New PlayList] to create a new
PlayList.
Moving a PlayList chapter -RWVR
Use this function to re-arrange the playing order of a PlayList title on the
[Chapter List-Playlist] menu. Select [Move] option from the menu on the left of
the [Chapter List-Playlist] screen and press ENTER. Use v V b B to choose the
place you want to move the chapter then press ENTER. The updated menu is
displayed
Select a title or chapter that you want to delete and press ENTER. Select
[Delete] option from the menu on the left of the screen and press ENTER to
confirm.
25
DR385-S_BFRALLK-ENG
Time search -RWVR
6/13/08
-RWVideo
11:29 AM
+RW
+R
Page 26
-R
You can select the start of a title by searching through the time duration. Select
a title that you want to search and press ENTER. Select [Time] in the [Search]
option from the menu on the left of the screen and press ENTER to display the
[Search] menu.
Use b B to find the time you want to start. Each press of b B to moves 1
minute and press and hold b B to moves 5 minutes. Press ENTER to watch a
title from a selected time.
Hiding a chapter or title +RW
+R
You can skip through playing chapters or titles without actually deleting them.
Select a chapter or title you want to hide and press ENTER. Select [Hide] in the
[Edit] option then press ENTER.
If you want to recover the hidden title or chapter, select the hidden title or chapter and press ENTER. Select [Show] in the [Edit] option then press ENTER to
recover it.
26
Deleting a part -RWVR
You can delete a part which you do not want in the title.
Select a title that you want to delete part and press ENTER. Select [Delete Part]
in the [Edit] option from the menu on the left of the screen and press ENTER to
display the [Delete part] menu. You can find the point using PLAY, SCAN,
PAUSE/STEP buttons.
[Start Point]: Select starting point of a part that you want to delete then press
ENTER.
[End Point]: Select ending point of a part that you want to delete then press
ENTER.
[Cancel]: Press ENTER to cancel the selected part.
[Done]: Press ENTER to delete the selected part.
Dividing a title +RW
Use this function to split a title up into two titles. Select a title that you want to
divide and press ENTER. Select [Divide] in the [Edit] option from the menu on
the left of the screen and press ENTER to display the [Divide] menu. Find the
point you want to divide a title using PLAY, SCAN, PAUSE/STEP buttons and
press ENTER while [Divide] option is selected. The playback screen shows the
divided point. Select [Done] option and press ENTER to divide. You cannot
select dividing point less than 3 seconds.
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 27
Naming a title
Protect a title -RWVR
When a title is recorded by this unit, the title name will be named by a number.
You can change a title name by using this function.
Use this function to protect a title against accidental recording, editing or deleting. Select a title you want to protect and press ENTER. Select [Protect] option
from the menu on the left and press ENTER. The lock mark will appears on the
title thumbnail.
+RW
+R
If you want to unprotect the title, select the protected title and press ENTER.
Select [Unprotect] option from the menu on the left and press ENTER to unprotect it.
Overwriting +RW
Select a title that you want to change a name and press ENTER. Select [Title
Name] option from the menu on the left of the screen and press ENTER to display the keyboard menu. Use v V b B to select a character then press ENTER
to confirm your selection on the keyboard menu.
[OK]: Finish the naming.
[Cancel]: Cancels all entered characters.
[Space]: Inserts a space at the cursor position.
[Delete]: Deletes the previous character at the cursor position.
You can overwrite a new video recording on a recorded title that is not protected. Select the TV channel or input source you want to record. Press
MENU/LIST to display the Title List menu. Use v V b B to highlights a title you
want to overwrite and then press REC to start overwrite. To stop the recording,
press STOP.
If you overwrite the longer recording than the current title on the fully recorded
disc, the next title is overwritten. If next title is protected, the overwriting stops at
the starting point of the title.
You can use remote control buttons for entering a name
PLAY (N): Inserts a space at the cursor position.
X (PAUSE/STEP): Deletes the after character at the cursor position.
x (STOP), CLEAR: Deletes the previous character at the cursor position.
. / >: Moves cursor to left or right.
MENU/LIST, DISPLAY: Changes the character set on the keyboard menu.
Numbers (0-9): Enters the corresponding character at the cursor position.
Combining chapters -RWVR
+RW
+R
Use this function to merge the selected chapter with adjacent chapter. Select a
chapter and press ENTER. Select [Combine] option to views combine indicator
between chapter thumbnails. Press ENTER to combine indicated two chapters.
This function is not available in conditions as listed below.
There is only one chapter within the title.
The first chapter is selected.
The chapters that you want to combine are created by deleting a part from
an Original title.
The chapters that you want to combine are created from different titles.
One of the playlist chapter that you want to combine has been moved.
27
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 28
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Chinese
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose an area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
28
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
FI
FR
DE
GB
GR
Area
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
Code
GL
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
MY
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Code
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
Area
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Code
PY
PH
PL
PT
RO
RU
SA
SN
SG
SK
SI
ZA
KR
ES
Area
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 29
Troubleshooting
General
The power does not turned on.
b Plug the power cord into the wall outlet securely.
There is no picture.
b Select the appropriate video input mode on the TV so the picture from the
unit appears on the TV screen.
b Connect the video connection securely.
b Check the [Video Output Format] in SETUP menu is set to the appropriate
item that conforms to your video connection.
Picture noise appears.
b You are playing a disc recorded in a color system that is different form
your TV.
b The video signal from the external component is copy-protected.
The channel is not found or stored.
b Check your antenna connection.
There is no sound.
b Connect the audio connection securely.
b The input source setting on the amplifier or the connection to the amplifier
is incorrect.
b The unit is in scan, slow motion, or pause mode.
The remote control does not work properly.
b
b
b
b
The remote control is not pointed at the remote sensor of the unit.
The remote control is too far from the unit.
There is an obstacle in the path of the remote control and the unit.
The batteries in the remote control are exhausted.
Playback
The unit does not start playback.
b Insert a playable disc. (Check the disc type, color system, and regional
code.)
b
b
b
b
Cannot play a disc recorded using this unit on other player.
b Finalize the disc.
b Check the disc compatibility of the player.
b Place the disc on the disc tray correctly inside the guide.
b Discs recorded with copy-once material cannot be played on other
players.
The angle cannot be changed.
b Multi-angles are not recorded on the DVD Video being played.
b The angle cannot be changed for the titles recorded on this unit.
The subtitle language cannot be changed or turned off.
b Subtitles are not recorded on the DVD Video being played.
b The subtitle cannot be changed for the titles recorded on this unit.
Cannot play MP3/WMA/JPEG/DivX files.
b The files are not recorded in a format that the unit can play.
b The unit does not support the codec of the DivX® movie file.
b The resolution is higher than the unit can support.
Recording
Cannot record or does not record successfully.
b Check the remaining space on the disc.
b Check that the source you are trying to record in not copy protected.
b The power may have failed during recording.
b Use a VR mode formatted disc for copy-once material.
Timer record does not record successfully.
b Clock is not set to correct time.
b The start time of the timer recording is past.
b Two timer recordings may have overlapped, in which case only the earlier
one will record completely.
b When setting the recording channel, make sure you set the unit’s built-in
tuner, not the TV’s built-in tuner.
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
Clean the disc.
Cancel the Rating function or change the rating level.
29
DR385-S_BFRALLK-ENG
6/13/08
11:29 AM
Page 30
Resetting the unit
If you observe any of the following symptoms.
The unit is plugged in, but the power will not turn on or off.
The front panel display is not working.
The unit is not operating normally.
You can reset the unit as follows.
Press and hold the POWER button for at least five seconds. This will
force the unit to power off then turn the unit back on.
Unplug the power cord, wait at least five seconds, and then plug it in
again.
Audio recording format
Sampling frequency
Compression format
48kHz
Dolby Digital
Playback
Frequency response
Signal-to-noise ratio
Harmonic distortion
DVD (PCM 48 kHz): 8 Hz to 22 kHz,
CD: 8 Hz to 20 kHz
DVD (PCM 96 kHz): 8 Hz to 44 kHz
More than 100 dB (AUDIO OUT connector)
Less than 0.008% (AUDIO OUT connector)
Inputs
Specifications
ANTENNA IN
VIDEO IN
General
Power requirements
Power consumption
Dimensions (approx.)
Net weight (approx.)
Operating temperature
Operating humidity
Television system
Recording format
AC 200-240V, 50/60 Hz
15W
430 X 49 X 245 mm (w x h x d) without foot
2.6 kg
5˚C to 35˚C
5 % to 65 %
PAL B/G, SECAM L
color system
PAL
Recording
Recording format
Recordable media
Recordable time
Video recording format
Sampling frequency
Compression format
30
DVD Video Recording, DVD-VIDEO
DVD-RW, DVD-R, DVD+RW, DVD+R
DVD (4.7GB): Approx. 1 hour (XP mode),
2 hours (SP mode), 4 hours (LP mode),
6 hours (EP mode), 11 hours (MLP mode)
27MHz
MPEG2
AUDIO IN
Antenna input, 75 ohms
1.0 Vp-p 75 ohms, sync negative, RCA jack x 1/
SCART x 2
2.0 Vrms more than 47 kohms, RCA jack
(L, R) x 1 / SCART x 2
Outputs
VIDEO OUT
COMPONENT VIDEO OUT
Audio output (digital audio)
Audio output (analog audio)
1 Vp-p 75 Ω, sync negative, SCART x 2
(Y) 1.0 V (p-p), 75 Ω, sync negative,
RCA jack x 1, (PB)/(PR) 0.7 V (p-p), 75 Ω,
RCA jack x 2
0.5 V (p-p), 75 Ω, RCA jack x 1
2 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R)
x 1/ SCARTx2
Accessories
RF cable (1), Remote control (1), Battery (1)
Design and specifications are subject to change without notice.
Download PDF

advertising