LG | DVC5930 | LG DVC5930 Owner's manual

DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
DVC5930
PAL SECAM
Before
connecting, operating
or
adjusting this product,
carefully and
read this instruction booklet
please
completely.
Precautions /
Safety
Important
WARNING
Notes
copyrights:
by
law to copy, broadcast, show, broadcast
via cable,
play in public, or rent copyright material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
on
It is forbidden
RISK OF ELECTRIC SHOCK
DO NOT OPEN
this unit
controlling
notes on
(OR BACK)
discs.
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
an
shock to persons.
This
product incorporates copyright protection technology that
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
is
SERIAL NUMBER: The serial number is found
the back of
on
this unit. This number is
The exclamation mark within
an
equilateral triangle
is intended to alert the
important operating
user to the presence of
and maintenance (servicing)
instructions in the literature
accompanying
the
product.
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
___________________________________
___________________________________
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
Features:
TRIC
?
Complete versatility
Tapes.
to
?
Watch
recording
?
Remote controls both DVD and VCR decks.
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
?
?
CAUTION:
This
To
Digital
ensure
manual
Video Disc
proper
carefully
use
Player employs
of this
Use of
controls, adjustments
specified
Laser
product, please
and retain for future
require maintenance, contact
see service procedure.
other than those
a
System.
read this owner's
reference, should the unit
authorized service location-
an
prevent direct exposure
or
the
performance
of
procedures
herein may result in hazardous
to laser
beam, do
not
try
apparatus shall
or
such
vases, shall be
as
splashing
and that
dripping
This
product
the
This unit
(unless
DVD is copy
requirements
comply
1
uses one
89/336/EEC, 93/68/EEC and 73/23/EEC.
this
set of controls to
operate both DVD
2
in
POWER Button
Press the POWER button
front
panel
to turn
on
the remote control
or
on
this unit.
on
the remote control when you
DVD Button
Press DVD button
want to control the DVD.
The DVD indicator will
display
with the
of EEC DIRECTIVE
protected
controlling
notes on
following buttons are helpful
successfully controlling each part.
apparatus.
is manufactured to
radio interference
TV show to the VCR.
a
unit
exposed to water,
objects filled with liquids,
on
VHS
Macrovision).
Important
not be
no
placed
or
Hi-Fi Stereo VCR.
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The
audio CDs
and VCR. The
radiation exposure.
To
DVD while
a
play DVD, VCDs,
Records from DVD to VHS
with
3
light
on
the front
panel
to show that the DVD is selected.
VHS Button
Press the VHS button
on
the remote control when
you want to control the VCR.
The VHS indicator will
display
4
light
on
the front
panel
to show that the VCR is selected.
DVD/VCR
Toggle
Press the DVD/VHS SELECT button
panel
to
toggle
on
the front
control between the DVD and the
VCR.
5
OUTPUT SELECT Button
Select
TV
2
to
one
screen.
of your
output
sources
to view
on
the
Contents
Introduction
SafetyPrecautions.........................2
2
Important notes on controlling this unit
.
.
.
.
.
.
Operation withAudioCDandMP3Discs.
PlayinganAudioCDandMP3Discs.
.
.
.
.
.
.26
.26
Pause.............................26
.
.
.
.
.
.
.
.
.
.
TableofContents..........................3
BeforeUse..............................4-5
MovingtoanotherTrack...............26
RepeatTrack/All/Off...................26
PlayableDiscs...........................4
Search.............................26
Precautions.............................5
NotesonDiscs..........................5
Random...........................26
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
3DSurround........................26
.
.
.
.
.
.
.
.
.
.
.
.
RemoteControl............................7
RearPanel................................8
Preparation
Connections............................9-10
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
.11-15
BeforeOperation-VCRpart.
Initialpreset............................11
SettingtheclockManually.................12
Tosetthecoloursystem..................12
Howtousingthemainmenu...............13
.13
TuninginTVstationsAutomatically.
.14
TuninginTVstationsManually.
.15
ChangingtheotherofTVstations
DeletingTVstations......................15
.16-19
BeforeOperation-DVDpart.
GeneralExplanation......................16
On-ScreenDisplay.......................16
InitialSettings........................17-19
Initial Settings General Operation.
17
Language..........................17
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................17
Sound.............................18
RepeatA-B.........................26
.26
ChangingtheAudioChannel.
ProgrammedPlayback.....................27
Programmed Playback with Audio CD
.
.
.
.
.
.
.
.
.
.
andMP3Discs............................27
.27
ProgrammedPlaybackwithVideoCD.
.27
RepeatProgrammedTracks
.27
ErasingaTrackfromProgramlist.
27
Erasing the Complete Program list.
.28-29
AdditionalOperation-VCRpart.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
OnScreenDisplay.......................28
TapeCounterMemoryStop................28
ChildLock.............................28
.28
VideoDoctor(Self-Diagnosis).
ez(easy)repeat.........................28
Hi-FiStereoSoundSystem................29
.29
WideScreenCompatibility16:9.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Tosetthedecoder......................29
.30
AdditionalOperation-DVDpart.
.
.
.
.
.
.
.
.
.
.
.
.
LastConditionMemory...................30
ScreenSaver...........................30
VideoModeSetting......................30
NotesonMP3Discs.....................30
SpecialRecording.........................31
CopyingfromDVDtoVCR.................31
31
Recording from another video recorder
.
.
.
.
.
.
.
Others(DRC/Vocal/PBC)...............18
ParentalControl......................19
Operation
OperationwithTape.....................20-22
Playingatape..........................20
.20
CM(CommercialMessage)Skip.
.20
OPR(OptimumPictureResponse).
.21
InstantTimerRecording(ITR).
Timer recording using On Screen Display.
22
.23-25
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............23
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Reference
Troubleshooting..........................32
LanguageCodeList.......................33
CountryCodelist.........................34
Specification.............................35
About the
symbols
for instructions
.
.
Indicates hazards
itself
or
likely to cause
damage.
harm to the unit
other material
GeneralFeatures........................23
MovingtoanotherTITLE...............23
23
Moving to another CHAPTER/TRACK
.
.
.
.
.
SlowMotion.........................23
Still Picture and Frame-by-Frame Playback
24
Search.............................24
Random...........................24
.
.
.
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
.
Repeat............................24
RepeatA-B.........................24
TimeSearch........................24
3DSurround........................24
Zoom..............................25
MarkerSearch.......................25
SpecialDVDFeatures....................25
TitleMenu..........................25
DiscMenu..........................25
CameraAngle.......................25
.25
ChangingtheAudioLanguage.
.
.
.
.
.
.
.
.
.
Subtitles...........................25
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
Chapter (DVD only)
Sections of a picture
Audio CD
(8cm/12cmdisc)
In addition, this unit
can
or
play
a
CD-R
or
Depending
CD-RW that
MP3 files.
--
on
the conditions of the
recording equip-
The unit cannot
or
play
musical
piece
that
are
smaller
composed of one or several chapters. Each
assigned a chapter number, enable you to
locate the chapter you want. Depending on the disc, no
chapters may be recorded.
or an
or
data,
or a
is
chapter
Track
no
feature content
A title is
the CD-R/RW disc itself, some CD-R/RW
discs cannot be played on the unit.
ment
accompanying
than titles.
Notes
--
or
additional feature content, or music album. Each title
is assigned a title reference number enabling you to
locate it easily.
Video CD
contains audio titles
(DVD only)
DVD
the CD-R/RW discs that contain
contain different kinds of formatted data
(Video
Sections of
a
CD and audio CD
picture
or a
audio CD. Each track is
enabling
only)
piece
assigned
musical
on a
a
video CD
track number,
you to locate the track you want.
other than MP3 and CD-DA data.
--
Do not attach any seal or label to either side
or the recorded side) of a disc.
(the
labeled side
--
Do not
or
irregular shaped CDs (e.g., heart-shaped
octagonal). It may result in malfunctions.
use
Notes
Some
on
DVDs and Video CDs
playback operations
Scene
On
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
you to locate the scene you want.
A scene is composed of one or several tracks.
of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
designed by the software manufacturer,
playback features of the unit may not be avail-
Types
There
of video CDs
are
two
disc content
some
and still
types of video CDs:
Video CDs
PBC
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
other functions may be added.
able,
Refer also to the instructions applied with the DVDs and
with the
Video CDs. Some DVDs made for business purposes
may not be played on the unit.
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
system via
menus, search
functions,
or
still
other
pictures
included in
the disc.
player and DVDs
player is designed and manufactured
2
for playback of region "2" encoded DVD software. The region code on the labels of some DVD discs
indicates which type of player can play those discs. This
unit can play only DVD discs labeled "2" or "ALL". If you
try to play any other discs, the message "Check Regional
Regional
code of the DVD
This DVD
Code" will appear on the TV screen. Some DVD discs
may not have a region code label even though their
playback
4
is
prohibited by
area
limits.
Video CDs not
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Cont'd)
Storing
Precautions
After
the unit
Handling
When
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
The
When
the unit
setting
picture and sound of a nearby TV or radio may be
distorted during playback. In this case, position the unit
The
away from the TV or radio,
removing the disc.
To
keep
Do not
near
or
turn off the unit after
volatile
liquids,
contact with the unit for
leave marks
such
as
on
a
long period
light, as there may be a considerable
increase inside the car.
Cleaning
temperature
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
ter out.
plastic products in
of time. They will
the surface.
soft, dry cloth. If the surfaces
soft cloth
are
moistened with
lightly
solution. Do not
benzine,
case.
insecticide spray,
To clean the cabinet
a
store the disc in its
the unit
Cleaning
Use
playing,
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
the surface clean
use
the unit. Do not leave rubber of
use a
discs
a
extremely dirty,
detergent
mild
strong solvents, such as alcohol,
thinner, as these might damage the surface
or
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
records.
vinyl
use
About
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
MP3
Audio CDs.
MP3 disc.
5
INTRODUC
Front Panel and
Window
Display
Tape Eject
Pause
PAUSE( /
)
playback temporarily / press repeatedly
for frame-by-frame playback.
STOP(A)
Stops playback.
Forward
Skip/Scan,
Fast-Forward
(
)
chapter/track.
Go to NEXT
Press and hold for two seconds for
a
fast forward search.
Winds the
tape forwards.
PLAY
DVD OPEN/CLOSE
Opens
or
closes the disc
Disc
Insert
a
( )
tray.
Reverse
Tray
Go to
disc here.
Skip/Scan,
beginning of
Rewind
current
to PREVIOUS
or
POWER
reverse
a
fast
search
Rewinds the
OFF.
or
(
)
chapter/track
chapter/track.
Press and hold for two seconds for
Switches the unit to
ON
( G)
playback.
Starts
tape.
Tape Compartment
EJECT
OPEN/
CLOSE
AV3
VIDEO
COPY
/I
L-AUDIO-R
REC/ITR
PROG.
DVD/VHS
Audio IN
(L/R)
TITLE
window
VCR Record
Shows the current
Channel
status of the unit.
DVD/VHS
Jacks
Copy
Point the remote control here.
Programmed playback
CHP/TRK
Indicates current
A timer
VCR
MP3 disc inserted
repeat
recording
is
Indicates total
ANGLE active
Bilingual
chapter or track number
engaged
recording is programmed or in progress
VCR's internal tuner is
active
Channel programme
Indicates
engaged
playing time/elapsed
Child Lock is
mode
The Hi-Fi track of
VHS
Cassette-In indicator
The current TV
The VCR Record
video is
Speed
broadcast in stereo
or
AB
PROG. TITLE
CHP/TRK
VCR
TIMER
REC
CDREC
HI-FI
ALL MP3
VCD
DVD
ST
6
a
tape is playing
VCD Video CD inserted
or
time
engaged
DVD to VHS copy is in progress
mode
CD Audio CD inserted
DVD
DVD inserted
show
Selectors
Button
Indicates current title number
MP3
Programme
Remote Sensor
Selector
DVD to VHS
PROG.
Display
Indicator
Video IN Jack
BIL
PR
SP
LP
LP
is set to SP
Remote Control
DVD/VHS select button
Selects
operational
OPEN/CLOSE
EJECT
Open or close the the disc
mode of remote
control.
POWER
Switch this unit ON
-
TV/VCR
OPEN/CLOSE
EJECT
POWER
Switch between your TV's tuner and
the VCR's internal tuner.
TV/VCR
DISPLAY
CLK/CNT
Access the On-Screen
Shows you the current time
DVD
DISPLAY
or
counter.
CLK/CNT
Select
an
item in the
SETUP
/ i
Select channel programme of VCR.
SETUP/ i
-
Access
or remove
setup
the title
menu
AV
Select input
into tape.
SELECT
ENTER
AV
REC/ITR
TITLE PAUSE/STEP STOP
?
PLAY
)
recording
sources
into
tape.
Forward SKIP/SCAN (
)/
Fast Forward
Search forward* / go to next
chapter or track.
FORWARD
-
available.
(
input
for
-
BACKWARD
?
of the disc if
PAUSE/STEP
DVD disc.
source
REC/ITR
Record your
menu.
TITLE
Display
DISC MENU
OK
menu
a
sources
SELECT/ENTER/OK
Acknowledge menu selection.
Display.
FGDE(left/right/up/down)
-
DISC MENU
Access menu of
OUTPUT
SELECT
VHS
Tape Eject.
OUTPUT SELECT
Select one of your output
to view on the TV screen.
OFF.
or
tray.
-
PROGRAM
-
*
?
CLEAR
Pause
playback temporarily / press
repeatedly for frame-by-frame
playback.
STOP(A)?
Stops playback.
Winds the
tape forwards.
Press and hold button for about
two seconds.
PLAY (G)
Starts playback.
?
?
AUDIO SUBTITLE MARKER
-
SEARCH
Reverse SKIP/SCAN (
)/
Rewind
Search backward* / go to beginning
of current chapter or track or go
to previous chapter or track.
Rewinds the tape.
-
0-9 numerical buttons
Select numbered items in
a menu.
AUDIO
Select
audio
an
an
a
subtitle
ez
REPEAT CM SKIP
*
LP
PROGRAM
Access or remove program menu.
CLEAR
Clear a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
?
point during playback.
SEARCH
MARKER SEARCH
camera
angle
-
?
menu.
ANGLE
Press and hold button for about
two seconds.
?
language.
MARKER
Select DVD
A-B
-
language (DVD)
audio channel (CD).
Select
Display
REPEAT RANDOM
?
or
SUBTITLE
Mark any
C.LOCK ANGLE RETURN ZOOM
-
?
if available
?
REPEAT/ez REPEAT
-
RETURN
?
-
-
-
Remove the
Displays
the
menu
setup
of
a
menu.
?
video CD
-
-
CHILD LOCK
on
all.
REPEAT
A-B/LP
with PBC.
Switch the Child Lock
Repeat chapter, track, title,
ez
Repeat sequence.
Select the recording
speed
of the
tape.
and off.
?
RANDOM/CM SKIP
Play tracks in random order.
CM SKIP
-
-
?
ZOOM
Enlarge
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
the buttons.
Distance: About 23 ft
remote
Angle:
remote
Detach the
AAA AAA
(7 m)
battery
from the front of the
video
image.
installation
battery
cover on
(size AAA) batteries
aligned correctly.
sensor
the
rear
of
the remote control, and insert two R03
with
and
About 30° in each direction of the front of the
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel
AUDIO OUT
Connect to
amplifier,
an
receiver
or
(Left/Right)
stereo
system.
COAXIAL
Connect to
(Digital audio out jack)
digital (coaxial) audio equipment.
AERIAL
Connect the aerial
using
this
jack.
EURO AV2 DECODER
Connect to
pay-TV
decoder
or
another video recorder.
VHS IN+OUT/DVD OUT
DVD EXCLUSIVE OUT
AERIAL
DIGITAL
AUDIO
AUDIO OUT
OUT
COAXIAL
R
EURO AV2
DECODER
RF.OUT
EURO AV1
L
AUDIO/
VIDEO
VIDEO OUT
AC Power Cord
Connect to
a
power
source.
EURO AV1 AUDIO/VIDEO
Connect to your TV set
(VHS
or
IN+OUT/DVD
OUT)
another video recorder.
RF.OUT
Connect to your TV
using
this
jack.
VIDEO OUT
Connect to
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
a
TV with video
inputs.
Connections
DVD exclusive out connection
Tips
Depending
your TV and other equipment you wish
to connect, there are various ways you could connect
the unit.
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
For better sound
reproduction, connect this unit's
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page 10.
this unit is connected
watch the DVD
Connect the VIDEO OUT
jack
on
this unit's DVD
jack
on
the TV
the video cable.
Connect the Left and
Right
AUDIO OUT
jacks
of
this unit's DVD EXCLUSIVE OUT to the audio left/
right
in
jacks
on
the TV
the audio cables.
using
(DVD
exclusive out
VHS IN+OUT/DVD OUT
connection)
DVD EXCLUSIVE OUT
AUDIO
DIGITAL
Set the TV to the correct video
--
playback.
EXCLUSIVE OUT to the video in
to the TV.
directly
input channel.
Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
sure
2
only
Rear of this unit
Caution
Make
1
can
using
best connections.
--
You
on
OUT
AUDIO OUT
AERIAL
EURO AV2
DECODER
R
COAXIAL
RF.OUT
EURO AV1
L
AUDIO/
VIDEO
to a TV
Connecting
Make
the
To
one
of the
VIDEO OUT
following connections, depending
existing equipment.
on
of your
capabilities
enjoy playing back a tape you must
using a SCART lead.
connect this
unit to the TV
Basic connection
1
(AV)
Rear of TV
Connect the EURO AV1 AUDIO/VIDEO
panel of this unit to
TV using a SCART
the SCART
input
on
the
socket
on
rear
the
SCART INPUT
VIDEO
INPUT
AUDIO INPUT
AERIAL
lead.
L
R
Some TV broadcasters transmit encoded television
2 signals
which you can only see with a purchased or
rented decoder. You can caonnet such a decoder
(descrambler)
Basic connection
1
Decoder
(or Satellite)
to this unit.
(RF)
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel
of this unit.
2
Connect the
RF.OUT
jack
supplied
on
the
television's Antenna
DVD EXCLUSIVE OUT
RF antenna cable from the
panel
Input.
rear
DIGITAL
of this unit to your
AE
AL
AUDIO OUT
AUDIO
OUT
EURO AV2
DECODER
R
COAXIAL
EURO AV1
RF.OUT
L
AUDIO/
VIDEO
VIDEO OUT
Rear of this unit
(Basic connection)
9
PREATION
Connections
Connecting
(Cont'd)
Optional Equipment
to
Notes
--
Connecting to an amplifier equipped with
channel analog stereo or Dolby Surround
two
Connect the Left and
Right AUDIO OUT jacks on this
unit to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
channel
1
Connect this unit's DIGITAL AUDIO OUT
(COAXIAL) to
amplifier. Use
the
an
jack
corresponding in jack on your
optional coaxial audio cable.
You will need to activate this unit's
2 (See "Digital
Digital
A
Audio
Output"
on
digital output.
18).
page
Multi-channel sound
digital multi-channel
quality. For this
connection
provides
the best
sound
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
Rear of this unit
VHS IN+OUT/DVD OUT
DVD EXCLUSIVE OUT
AUDIO
DIGITAL
OUT
AUDIO OUT
AERIAL
EURO AV2
DECODER
R
COAXIAL
RF.OUT
EURO AV1
Pb
L
AUDIO/
VIDEO
VIDEO OUT
2 channel
analog
stereo
or
Dolby
Surround connection.
DVD exclusive out
Digital
multi-channel
connection
L
R
AUDIO INPUT
Amplifier (Receiver)
10
COAXIAL
DIGITAL INPUT
If the audio format of the
the
capabilities of
produce a strong,
--
To
see
Screen
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the On-
Display,
press AUDIO.
Before
Operation
-
VCR part
Initial preset
For the following steps we do assume that you have just
connected your video recorder for the very first time. In
this case the video recorder is on after mains connection.
You should not touch any buttons yet. On the connected
TV you will now see.
Note
-
If this
was
1
menu
Select the
F
PREATION
does not appear, your video recorder
programmed already.
country according
to your
area
with
andG.
"A": Austria, "B": Belgium, "CH": Switzerland, "D":
Germany, "DK": Denmark, "E": Spain, "F": France,
"I": Italy, "N": Norway, "NL": Netherlands, "P":
Portugal,
"S": Sweden, "SF": Finland, "AUTRES":
Others
A
BD
CH
NN L
DK
EFI
PSS F
Pr-12
OKi
ACMS
2
Press OK to start the automatic
storing
channels of the TV stations in your
01
Pr-12
S
C02
00
of the
area.
TF1
E
ACMS
i
11
Before
Setting
Operation
the clock
VCR part
-
To set the colour system
Manually
The clock in your VCR controls time and date
settings for your VCR.
automatically during ACMS
Channel
(Automatic
Memory System) when your
The clock is set
VCR detects
a
channel that broadcasts
If the broadcast
signal.
will not be set and will
a
Teletext
signal is weak the clock
require setting manually.
1
Press i.
2
The main
3
Press 1
menu
will appear
on
the TV
screen.
or
2 to select the SYSTEM and press OK.
or
4 to select
Press i.
1
Press 1
or
Press 3
4 system
2 to select TIME DATE.
Press OK.
The auto
D
or
mode
adjust
E if you
can
be set to "OFF"
want to set the time
according
to the COLOUR
used.
by pressing
manually.
Press OK.
REC
fOSD
ON
OFF
AUTO
ADJUST
:
AUTO
PAL
SECAM
MESECAM
SYSTEM
AB
C
OSD
VCR
Dr.
NIC
SYSTEM
i
ON
--
5
12
TIME
DATE
OK i
HHMMDDMMYY
--
:.
-
-
--
--
--
---
.
12
TIME
DATE
2
i
Use the numbered buttons
to alter the
the remote control
on
HOURS, MINUTES, DAY,
MONTH and
YEAR.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The
day
of the week will appear
automatically
when
HHMMDDMMYY
8
:.
0010102TUE
.
12
TIME
DATE
i
you enter the year.
3
4
If you make
a
correct details.
Press i.
12
mistake press 1
or
2 and enter the
Press i to
remove
the
menus
from the TV
screen.
Before
How to
Operation
using
-
VCR part
the main
Tuning
menu
This VCR
menus
The
can easily be programmed by using
displayed on screen.
menus are
the
controlled from the Remote
Control Handset.
1
2
by pressing
menu
will appear
on
the TV
screen.
is weak your VCR may
signal
turn to the MANUAL TUNING section on
page 14.
1
Press i button.
The main
If the TV broadcast
Automatically
not detect the necessary information and will be
and to store them correctly. To overcome this problem
please
Switch on your TV set and video recorder
the POWER button.
in TV Stations
2
Press POWER to turn
your VCR.
on
Press i button.
The main
Press 1
will appear on the TV
2 to select the ACMS.
menu
or
screen.
Press OK.
12
REC
PSET
R
fOSD
Pr-12
ACMS
+
ON
OFF
16:9
4:3
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
NIC
-
DECODER
REC
OKi
OPR
12
PSET
R
REC
REC
Timer
Pr-12
ACMS
+
fOSD
recording setting (see p. 22).
PR SET Manual tuning setting (see p. 14).
ACMS ACMS (Automatic Channel Memory
System) (see p. 13).
TIME DATE
Date & clock setting (see p. 12).
SYSTEM To set the Colour TV System
(see p. 12).
ABC OSD To change the language setting for
-
ON
OFF
16:9
4:3
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
Pr-12
NIC
-
DECODER
ACMS
OPR
OKi
-
-
-
O
O
-
A
BD
CH
NN L
-
DK
EFI
PSS F
OTHERS
Pr-12
OKi
ACMS
OSD.
You
O
O
O
select the
language among
English, Deutsch, Francais, Italiano,
Espanol and Dutch.
Dr. To check a problem with your VCR
(see p. 28).
F.OSD ON/OFF To display the operational
mode of your VCR (see p. 28).
can
Press 1
-
-
To select the
process.
The VCR's clock will be set
automatically when
tuning has finished. If the clock is wrong
please see "Setting the clock manually" on page 12.
aspect ratio of your TV
automatic
(see p.29).
O
O
DECODER
OPR
-
-
To
use a
pay-TV
decoder
(or Satellite)
with your VCR (see p. 29).
To improve the playback picture
(see
O
NIC
-
p. 20).
To activate or deactivate the NICAM
sound
(see
p.
2 to select COUNTRY.
D:Germany, DK:Denmark, E:Spain, F:France,
I:Italy, N:Norway, NL:Nertherlands, P:Portugal,
S:Sweden, SF:Finland, Others)
Press OK again to start the automatic tuning
-
16:9/4:3
or
3 (A:Austria, B:Belgium, CH:Switzerland,
01
C02
00
TF1
02
C03
00
FR2
03
C04
00
FR3
digital
29).
S
E
Pr-12
3
Press 1 and 2 to select the desired
4
Press "i" to return to
Press OK and press 3
a
or
TV
i
ACMS
menu.
4 to select.
picture.
4
The TV STATION TABLE will appear when
is complete.
Press i to
save
your
settings.
01
C02
00
TF1
02
C03
00
FR2
03
C04
00
04
C05
00
ARTE
05
C06
00
TV1
06
C07
00
TV2
07
C08
00
08
C09
00
PSET
R
tuning
FR3
SVT
SVT1
MOVE
:
DELETE
:
,
OKi
13
PREATION
Before
Tuning
In certain
Operation
VCR part
-
in TV Stations
Manually
5
of the country broadcast signals
be
too
weak
for your VCR's automatic tuning
may
to
find
or
process
assign TV stations correctly.
Press OK.
Press 2 to select MFT.
Press 3
areas
or
4 to
You must tune in these weaker broadcast stations
manually
adjust.
PR
CH
MFT
09
C10
00
STATION
in order for your VCR to store them.
CHANNEL/CABLE
1
Press i.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
AV
:
OK i
PSET
R
screen.
6
Press OK.
Press 2 to select STATION
that you may
so
name
your TV station.
Press OK.
The TV station
list will appear.
name
TF1
FR2
12
REC
PSET
R
fOSD
ON
OFF
Pr-12
ACMS
+
16:9
4:3
TIME
DATE
SYSTEM
VCR
OSD
Dr.
ARTE
PSET
R
NIC
-
DECODER
FR3
AB
C
OKi
OPR
PR
CH
MFT
TV1
09
C10
00
TV2
SVT
SVT1
PSET
R
PR
01
CH
MFT
STATION
C02
00
PR-01
CHANNEL/CABLE
PSET
R
2
:
7
AV
Press D
OK i
E to select
or
station
a
name
from the list.
Press OK to select it.
OK i
If your station
name
isn't
OK, but go
stage
8.
to
the list do not press
on
Press i.
The station table will appear.
Press 3 or 4 to select the programme number that
you want to tune
(for example,
PR
TF1
FR2
FR3
ARTE
09).
PR
CH
MFT
TV1
09
C10
00
TV2
SVT
SVT1
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
PSET
R
8
than
change a TV station name manually
using the "standard" names.
can
Press 3
3
Press OK.
new
Press AV to select C
(Standard stations)
or
S
-
C69, S01
or
station
Press 1
(Cable stations):
C02
rather
Press G.
OKi
,
You
OK i
or
4 to select letters and numbers for the
name.
2 to
move
back and forth between
characters.
-
S41.
Press OK.
Enter the channel number of station that you want
to tune with the numbered buttons or use 3 or 4
to find the
required
station.
PR
C09
PR
CH
09
C--
MFT
--
STATION
CHANNEL/CABLE
:
9
AV
FR2
OK i
Press i, confirm the station
Press i again.
Your
or
3 or 4.
"SECAM"
by
new
TV station has
If you wish to
stages 1 9.
now
manually
placement.
been tuned into your VCR.
tune other stations
-
09
10
PR
CH
MFT
09
C10
STATION
11
12
00
13
PAL
SECAM
14
15
16
OKi
PSET
R
14
STATION
00
PSET
R
OK i
Press OK and select the "PAL"
PSET
R
MFT
----
PSET
R
4 pressing
CH
C10
C10
FR2
00
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
--
--
-----
-----
MOVE
:
DELETE
:
,
OKi
repeat
Before
Operation
Changing
VCR part
-
the order of TV Stations
Deleting
After tuning TV stations into your VCR you may
wish to change the order in which they are stored
without having to retune them against! The instructions
given on this page will show you how you can simply
move them into your desired order.
1
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
TV Stations
After tuning TV stations into your VCR you may
wish to delete a station.
The instructions given on this page will show you
how easily delete any unwanted TV stations.
1
screen.
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
12
PSET
R
REC
12
PSET
R
REC
Pr-12
ACMS
+
fOSD
ON
OFF
16:9
4:3
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
fOSD
PSET
R
NIC
-
DECODER
16:9
4:3
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
PSET
R
NIC
-
DECODER
OKi
OPR
OKi
OPR
PR
PR
01
Pr-12
ACMS
+
ON
OFF
CH
MFT
STATION
C02
00
PR-01
01
CH
MFT
STATION
C02
00
PR-01
CHANNEL/CABLE
CHANNEL/CABLE
PSET
R
2
Press i.
Press 3
:
AV
PSET
R
2
4 to select the programme number
you want to move (for example, PR 03).
or 4 to select the programme number
you want to delete. (for example, PR 03)
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
C05
00
PR-04
01
C02
00
PR-01
02
C03
00
PR-02
05
C06
00
PR-05
03
C04
00
PR-03
06
C07
00
PR-06
04
C05
00
PR-04
07
C08
00
05
C06
00
PR-05
08
C09
00
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PSET
R
:
DELETE
:
PR-08
:
DELETE
:
OKi
,
OKi
,
C02
00
02
C03
00
PR-01
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
00
PR-05
06
C06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
3
Press 1.
After a short while, the selected station will be
deleted.
OKi
01
C02
00
02
C03
00
PR-02
03
C05
C06
00
PR-04
00
PR-05
C04
00
PR-03
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
C02
00
PR-01
02
C03
00
03
00
04
C05
C06
00
PR-02
PR-03
PR-04
05
06
C04
C07
00
00
PR-05
PR-06
07
C08
00
PR-07
08
C09
00
DELETE
P SET
R
4
PR-01
05
01
PR-08
MOVE
4 to select the programme number
you want to move to (for example, PR 05).
or
04
PR-07
MOVE
PR-08
MOVE
PSET
R
4
01
04
PSET
R
3
AV
OKi
Press i.
Press 3
Press 2.
Press 3
:
OKi
or
01
PREATION
screen.
:
:
,
OKi
Press i to remove the menus from the TV screen.
If you wish to delete other TV stations repeat
stages 1 3.
-
OKi
Press OK.
The selected programme will be moved to the new
programme number.
If you wish to move other TV stations repeat stages 1 4.
Press i to remove the menus from the TV screen.
01
C02
00
PR-01
02
C03
C06
00
03
00
PR-02
PR-03
04
C04
00
PR-04
05
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
08
MOVE:
PSET
R
DELETE
:
,
OKi
-
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
04
00
PR-02
PR-03
PR-04
05
C04
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
PR-07
PR-08
MOVE
:
DELETE
:
,
How to
selecting
Stored TV stations:
Stored TV stations can be selected in either of two ways.
Press PROG. 3 or 4 to select different stations that are
tuned into your VCR.
You may also directly select stations using the
numbered buttons on the remote control.
OKi
15
Before
General
This manual
Operation
-
DVD
part
Temporary
Explanation
the basic instructions for
gives
operating
require specific operation or allow
only limited operation during playback. When this
occurs, the symbol
appears on the TV screen,
that
the
indicating
operation is not permitted by this unit
or
is not available
On-Screen
The
TV
general playback
screen.
1
2
3
status
Some items
On-screen
or
highlighted.
Press 1
the
change
numbers
(e.g.,
title
can
setting
For
Video CDs
(non-PBC
only)
Video CDs
only)
Action
play
from this
prohibited
or
point
not available
Notes
Some discs may not
Screen Display.
provide
If
for 10 seconds, the On-Screen
no button is pressed
Display disappears.
of
setting
functions,
some
press SELECT/ENTER to execute the
all of the below On-
item.
an
be also be used for
number).
(non-PBC
Off
Resume
displayed on the
changed on the menu.
during playback.
The number buttons
Repeat
All Tracks
be
4 to select an item.
2 to
Track
Repeat
OFF
can
be
can
Repeat
Repeat A-B
AB
The selected item will be
or
ALL
display operation
Press DISPLAY
Press 3
TRACK
Display
Title
Repeat Chapter
CHAPT
the disc.
on
Repeat
TITLE
this unit. Some DVDs
Feedback Field Icons
setting.
DVD
Items
Function (Press 3/4 to select desired item)
Title Number
Shows the current title number and total number of
1/3
Chapter
Number
titles,
1/12
Time search
0:16:57
Audio
language
Digital Audio
Output mode
1
ENG
and
Subtitle
language
Angle
6CH
OFF
1/1
Sound
VCD2.0
D
NORM.
Track Number
1/4
Time
Audio Channel
to the desired title number.
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Shows the
elapsed playing time, and
point by the elapsed time directly.
searches the
1/2,or
Numbers, SELECT/ENTER
1/2,or
Numbers
,
SELECT/ENTER
Numbers
,
SELECT/ENTER
Shows the current audio soundtrack
encoding method, and
changes the setting.
channel
Shows the current subtitles
changes
the
language,
number, and
language,
angles,
and
and
angle number and total
changes the angle number.
Shows the current sound
changes the setting.
mode,
1/2
1/2
setting.
Shows the current
number of
and
1/2
1/2
0:16:57
STER.
NORM.
Function (Press 3/4 to select desired item)
Selection Method
Shows the current track
1/2,or
Numeric, SELECT/ENTER
and PBC On
Shows the
mode,
changes
and
number, total number of tracks
skip to the desired track number.
elapsed playing time (Display only)
Shows the audio
channel,
and
the
setting.
mode,
--
1/2
the audio channel.
Shows the current sound
changes
16
skips
VCD1.1
Items
Sound
and
Selection Method
and
1/2
Before
Initial
You
-
DVD
Personal Preferences
own
part
Menu
Settings
set your
can
Initial
1
Operation (Continued)
on
this unit.
Select
you
General
Settings
Language
a
see
Operation
Press SETUP.
The
setup
menu
for the
language
appears.
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
Country
Disc Subtitle
English
Disc Menu
French
Rating
German
PREATION
Italian
Code
Language
Audio
Digital
Output
Spanish
code
Italian
Aspect
Menu
menu
Others
Country
TV
This is the
Aspect
Menu
Original
menu.
Disc Audio
TV
Disc Audio
setup
when you press SETUP.
Chinese
Language
Polish
Audio
Digital
Output
Hungarian
Picture
Russian
Other------------
Others
TV
Press 3/4 to select the desired item.
2 The
screen
will show the current
selected item,
as
well
as
While the desired item is
3/4 to select the desired
3
Press SELECT/ENTER
4 selection.
Some items
Press
5 setup SETUP,
selected, press 2, then
setting.
to confirm your
additional
require
RETURN
setting for the
setting(s).
alternate
or
steps.
Aspect
DVD
4:3 Letterbox: Select when
nected.
Displays
a
theatrical
standard 4:3 TV is
images
picture.
above and below the
4:3 Panscan: Select when
a
with
standard 4:3 TV is
nected.
Both
Displays pictures cropped to
sides of the picture are cut off.
16:9 Wide: Select when
a
masking
fill your TV
con-
bars
conscreen.
16:9 wide TV is connected.
PLAY to exit the
menu.
Disc Audio
4:3 Letterbox
Disc Subtitle
4:3 Panscan
Disc Menu
16:9 Wide
Rating
Language
Disc
Select
Country
TV
Language
language
a
Aspect
Menu
DVD
for the disc's Menu, Audio, and
Subtitle.
Code
Language
Digital
Audio
Output
Others
original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 33. If you enter the wrong language
Original
:
The
code, press CLEAR.
Original
Disc Audio
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
code
Spanish
Italian
Aspect
Menu
Language
Chinese
Polish
Digital
Audio
Output
Hungarian
Russian
Others
Other------------
17
Before
Operation (Continued)
-
DVD
Sound
Digital
Others
Audio
Output
Each DVD disc has
Set the
part
of audio
variety
output options.
player's Digital Audio Output according to the
a
type of audio system you
The DRC, Vocal and PBC settings can be changed.
Press 3/4 to select the desired item and press
SELECT/ENTER. The
changed
use.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
a
DTS decoder,
MPEG decoder.
or
Dolby Digital
a
Rating
Country
TV
amplifier.
This unit
Menu
a
2-channel
digital
outputs sounds in the PCM
Disc Audio
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
PCM
/PCM
Rating
Code
Menu
Audio
Sample Freq.
thanks to
audio
digital
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
a
quietest ones). Then, you may
losing clarity
lower volume without
listen to
a
movie
of sound. Set
DRC to On for this effect.
48 KHz
Language
Digital
Output
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
at
Aspect
Audio
Dynamic Range Control (DRC)
possible,
tem.
Country
Language
Digital
decoder
2ch format when you play a DVD video disc recorded
on the Dolby Digital, MPEG1, or MPEG2 recording sys-
TV
Code
Aspect
Others
PCM: select when connected to
stereo
PBC On
Disc Menu
Dolby Digital decoder).
with
Vocal On
Disc Subtitle
Stream/PCM: Select "Stream/PCM" if you connected
this unit's DIGITAL OUT jack to an amplifier or other
equipment
DRC On
Disc Audio
if you connected this unit's DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equipment with
of the selected item is
setting
between On and Off.
96KHz
Output
Vocal
Others
Sample Frequency
To
Sample Frequency setting, first select
Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
change
the desired
18
Set Vocal to On
only
DVD is
The karaoke channels
playing.
mix into
a
when
a
multi-channel karaoke
on
the disc will
normal stereo sound.
the
PBC
Set
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
CDs.
to On
or
Off.
played according to the PBC.
played the same way as Audio
Before
Operation (Continued)
-
DVD
Parental Control
Rating
Code
Country
DVD
Enter the code of
DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain
part
the disc. These
scenes on
scenes are
country-dependent.
country/area
whose standards
were
CH
Disc Subtitle
are
PREATION
Code Set
Disc Audio
rated
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
a
used to rate the DVD video disc, referring to the list
(See "Country Code List", page 34.).
Disc Menu
Rating
Country
The Parental Control feature allows
TV
Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Code
Aspect
Language
Digital
Audio
Output
Others
Disc Audio
8
Disc Subtitle
7
Disc Menu
6
Rating
TV
Code
2
Audio
Digital
Output
Unlock
Change
Others
1
Select
2
While
3
When you have not entered a password yet.
Enter a 4-digit password using the numbered but-
3
and
on
the
Setup
menu
using
the
buttons.
4
"Rating"
tons to create
a
2
3
4
5
6
While
is
using
the 3/4 buttons
on
menu.
selected,
press 2.
Code is
Country
Follow
3 of
step
selected, press
"Rating"
Select the first character
Shift the
cursor
on
2.
left.
using
the 3/4 buttons.
1/2 buttons and select
using
the second character
using
3/4 buttons.
Press SELECT/ENTER to confirm your country
selection, then press SETUP to exit the
code
menu.
personal 4-digit security password,
then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify.
When you have already entered a password;
the code is
Enter
below
a
Code
Country
the setup
3
Language
1
"Rating"
Select
4
Aspect
Menu
1
5
Country
4-digit password using the numbered butpersonal 4-digit security pass-
Note
Confirmation of the
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
).
tons to confirm the
4
word, then press SELECT/ENTER.
Changing
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
1
Follow
2
Enter the old code, then press SELECT/ENTER.
Select Change using the 3/4 buttons then press
Select
a
rating from 1
(1) has the
tons. One
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
Ratings
1 to 8: Some discs contain
suitable for children. If you set
scenes
an
alternative
scene
is available
The alternative must have the
lower
one.
back will
or
If
no
change
same
on
rating
the disc.
or a
suitable alternative is
stop. You
the
a
found, play4-digit password
order to play the disc.
must enter the
rating
level in
Press SELECT/ENTER to confirm your
5 selection, then press
SETUP to exit the
1-2
as
code
shown above to the left
(Rating).
Enter the
new
4-digit code,
then press
SELECT/ENTER.
5
exactly the same code a second
fy by pressing SELECT/ENTER.
6
Press SETUP to exit the
Enter
If you
If you
menu.
forget your 4-digit
forget
your
time and veri-
password,
code
to clear the current pass-
word, follow the procedure below.
1
Press SETUP to
2
Use the Number buttons to enter the
display
the
setup
menu.
6-digit
number
"210499".
rating
menu.
Steps
4-digit
SELECT/ENTER.
4
not
rating for the player, all disc scenes with the same rating or lower will
be played. Higher rated scenes will not be played
unless
3
least
has the most
Eight (8)
using the 3/4 butplayback restrictions.
playback restrictions.
to 8
the
The
3
4-digit password
Enter
a new
code
is cleared.
as
shown above to the left
(Rating).
19
with tape
Operation
Playing
You will
a
only
playback, Shuttle :
back or still picture press F or G.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
Slow motion
tape
5 During playing
be able to load and
eject
video cassettes
when your VCR is plugged into the mains.
Your VCR may also playback recordings from NTSC
To switch off the slow motion and shuttle, press the
desired function.
tapes (on PAL TV).
better
Getting
a
When
cassette is inserted and
a
picture
During
playback started, the
function works to get the best
automatic
tracking
possible picture automatically. If the quality of the
recording is poor, repeatedly press 3 or 4 on the
remote control to manually adjust the tracking until
any distortions have been removed. Press numbered
0 on the remote control to switch automatic tracking
back
on
appear
tape.
can
or
that you have correctly connected your
described earlier in this book.
sure
VCR
as
Turn
on
your TV.
Press POWER to turn
If the end of the
tape is playing press CM SKIP
control to
away from you.
tape is reached, your VCR will stop
the tape.
playback.
material).
Repeatedly
facing
playback.
(Commercial Message) Skip:
normal
arrow
reduce
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
The video cassette should have the window side
up and the
picture,
playback automatically, rewind, stop, eject
While
facing
in the
seen
Press EJECT.
your VCR.
Insert the video cassette into your VCR.
on
be
E.
Press STOP to end
6
CM
1
If distortions
them with D
again.
Make
slow motion and shuttle, the noise bars may
on the picture according to the status of
commercial
skip
on
the remote
another programme
(or
press CM SKIP to
skip:
1 Press 30 seconds
2 Press 60 seconds
2
Press PLAY to start
playing
your tape.
video cassette which has had its
3 Press 90 seconds
If you load a
record protection tab removed, playback of the
cassette will start automatically.
4 Press 120 seconds
5 Press 150 seconds
6 Press 180 seconds
AUTO TRACKING
Your VCR will
give
3
the best
automatically adjust
picture quality.
Press PAUSE/STEP to still
Press PAUSE/STEP
the
tracking
to
picture.
repeatedly to advance
the
be
paused for up to 5 minutes. After 5
minutes your VCR will stop the tape to prevent
damaging the tape or your VCR
.
picture quality
pressing 3 or 4.
can
be
Press PLAY to continue
4 Picture
improved slightly by
playing
Picture
tape.
1
Press i.
2
Press 1
3
Press OK.
or
2 to select OPR.
your tape.
search:
back press either FORWARD or
BACKWARD to this will enable you to rapidly wind
During playing
the
tape (7 times normal playback)
the tape.
see
Logic search:
During fast forwarding
rewinding press and hold
FORWARD or BACKWARD the picture will be
played back at 7 times normal playback speed.
OFF
SOFT
SHARP
R
f
ON
OFF
where you
are on
20
Response)
automatically improves playback picture
quality by adjusting your VCR to the condition of the
slowed down at about 1/19 times the normal
Still
(Optimum
This feature
a
tape frame by frame.
If you hold down FORWARD, the picture will be
playback.
Tapes can
OPR
4
Press
3
or 4
16:9
4:3
12
12
MS
TIME
DATE
DECODER
VCR
OSD
Dr.
OPR
i
repeatedly
to select:
OFF, SOFT
SHARP.
playing
5
AB
C
OPR
Please note you may
or
SYSTEM
NIC
-
a
only
tape.
Press i return to
screen.
set OPR when
or
Operation
with tape
Instant Timer
Recording (ITR)
Your VCR allows you to make
variety of simple methods:
recordings using
5
a
video cassette
Your VCR
out.
runs
incorporates Long Play (LP)
record up to 180 minutes using Standard Play (SP);
using LP you will be able to record up to 360 minutes.
Please note there will be
sound
1
quality
Make
VCR
when
using
slight
loss in
picture
7
Insert
your VCR.
video cassette with
a
protection
as
recording.
Press PAUSE/STEP to avoid
recording
facing
scenes.
recording.
paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5
minutes your VCR will stop recording to prevent
damaging the tape or your VCR.
8
can
be
Press STOP to end
recording.
Press EJECT.
on
the TV
screen
for
a
few
seconds.
up and the
arrow
facing
away from you.
Notes
If you do not wish to record
happen
quite easily by accident!)
protection tab on
the back edge of the video cassette.
It is possible to record on a video cassette with the
record protection tab removed by covering the hole
on a
tape (this
remove
4
unwanted
VCR.
The video cassette should have the window side
3
quality,
recording
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
EJECT will appear
tab into your
and sound
much
SP.
Press REC/ITR to start
Tapes
LP.
on
or
Press PAUSE/STEP to continue
and
that you have correctly connected your
described earlier in this book.
Long Play
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
sure
as
Press POWER to turn
2
a
6
which
enables you to record up to twice the amount of
time on a video cassette. For example an E-180 will
Play.
SP will produce improved picture
however LP will provide twice as
time
Instant Timer
Recording (ITR) start recording
for
a set period of time or until the
immediately
Press LP if you wish to record in
Standard
Press
3 or 4 to select the programme number
wish
to record.
you
You may also directly select programme number
using the numbered buttons on the remote control.
If you wish to record directly from the SCART or
RCA sockets repeatedly press AV until the socket
you wish to record from is
AV 1 for
recording
on
the
rear
on
the
rear
displayed.
with self adhesive
can
the
tape.
Remember you can
watching another by
record
one
programme while
your instant recording,
TV/VCR
to
select
TV
mode
and then selecting a
press
different channel on your TV.
starting
from EURO AV1 SCART socket
of your unit.
AV 2 for recording from EURO AV2 SCART socket
AV 3 for
(Left
&
of your unit.
recording from VIDEO IN
Right) sockets on the front
and AUDIO IN
of your unit.
21
OPERATION
with tape
Operation
recording using On Screen
Display
Timer
6
You may set up to seven timer record events within
one month of the current date.
Press the numbered buttons to enter the recording start
and end times of the programme that you wish to record.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
You may also select the the start and end times by
pressing
Note
or 4.
PR
PR-01
Before setting the timer make sure that you have set
the VCR clock correctly and you know which stations
you have tuned TV stations on your VCR.
1
Insert a video cassette with protection tab into your
VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
2
Press i.
Press 1 or 2 to select REC.
Press OK.
Press OK to start setting the timer record event.
If all timer record events are full press 3 or 4 to
select the event that you wish to remove and
3
3
DATE
TIME
16
19002000
::
SP
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
--
--
--
--
SP
SP
SP
SP
SP
i
7
Press 3 or 4 to switch VPS/PDC on or off.
Press 2 to select the recording speed.
Press 3 or 4 to select the desired tape speed (SP, IP, or LP).
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program. IP mode is not
selected when VPS/PDC is ON.
replace.
Press 1 to delete the event.
PR
PR-01
PR
--
DATE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
--
--
--
--
SP
--
--
--
SP
--
--
--
--
--
--
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
Press the numbered buttons to enter the date of
the programme.
If you press OK before entering the date you may
select one of the following automated recording
features. Press 1 or 2 to select, then press OK to
confirm.
DLY To record every day (except Saturday and
Sunday) at the same time.
Weekly To record at the same time every week.
PR
DATE
TIME
--
PR-0116---
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
DLYSUMOTUWETHFRSA
--
--
--
::
--
--
~
--
OK i
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
--
--
--
--
SP
SP
SP
SP
SP
Check that the timer event details
Press i twice.
are
correct.
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your VCR Standby.
TIMER will appear in the display window while your
VCR waits to make the recording.
Notes
If at a later date you wish to delete or change any of the
settings in timer event memory you may do so without
having to enter all the timer event information again.
Simply display the timer event screen. Press 3 or 4 to
select the event that you wish to delete or change.
Press 1 to delete the event...or
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3 or
4 to enter the correct information.
If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme
will always be given priority.
Example:
Programme 1 is programmed to start at 16:00 and end at 17:00.
Programme 2 is programmed to start at 16:30 and end at 17:30.
(In this case, Programme 1 will be recorded in its entirety, but
only the last 30 minutes of Programme 2 will be recorded.)
To watch a DVD while performing a timer
recording, press TV/VCR.
Video
Programme System (VPS)
The Video Programme System (VPS) ensures that the TV programmes that you have programmed for timer recording will be
recorded exactly from their beginning to end, even if the actual
broadcasting time differs from the scheduled time due to delayed
start, or if the programme is extended beyond its scheduled time.
Also, if a programme is interrupted, for example, if a news flash is
inserted, the recording will also be interrupted automatically and
resumed when the programme continues.
The VPS signal is broadcast by the TV station and this controls the
timer in the video recorder.
VPS should be set ON for all timer recordings from TV stations
broadcasting these signals. It should be set OFF for all timer
recordings from TV stations that are not broadcasting these signals.
The similar system PDC, which is used in the time being in the
Netherlands, can also be used with your new video recorder.
***
22
--
~
SP
i
5
--
i
-
DATE
--
~
::
SP
--
-
--
--
SP
--
Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1
9, press 0 first, then the
channel number; for example Stations 3 03. You
may also select Channels by pressing 3 or 4.
Once selected press 2.
If you wish to record from AUDIO IN (L/R) and
VIDEO IN on the front or from the EURO SCART
sockets on the back of your unit, press AV to select
for correct display (AV1, AV2 or AV3).
FR3
--
::
SP
--
8
PR
SP
~
--
i
4
SP
::
--
SP
--
19002000
::
--
SP
--
TIME
16
--
TIME
--
DATE
--
Operation
Playing
a
with DVD and Video CD
DVD and Video CD
Playback Setup
Turn
on
nected to the DVD
Audio
VCD2.0
Note
VCD1.1
input
source con-
player.
system: Turn
and select the
DVD
DVD
the TV and select the video
General Features
on
input
the audio
source
Unless stated otherwise, all operations
described use the remote control. Some
features may also be available
system
on
the
Setup
menu.
connected to the
Moving
player.
to another TITLE
DVD
1/3
1
Press OPEN/CLOSE to open the disc
tray.
When
Load your chosen disc in the
2 facing
tray, with the label
up.
double-sided DVD is inserted, make
the side you want to play is facing up.
When
3
a
Press OPEN/CLOSE to close the
READING appears
starts
automatically.
tray.
might
another title
appear
Moving
DVD
When
instead.
The
is
a
title
displayed
may be displayed first after
Video CD which contains a menu.
DVD
or
loading
a
DVD
Use the 1 2
3
4
buttons to select the
title/chapter
view, then press SELECT/ENTER
you want to
to start
playback.
Press TITLE
or
DISC MENU to return to the
is
playback
menu
stopped, then
(0-9) to
disc has
than
as
1/3
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
>
briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
or
press DISPLAY. Then, press 3/4 to select C
(chapter) (or for a Video CD, select T for track). Then,
enter the chapter/track number using the numbered
buttons
screen.
1/12
on a
more
Press .
menu screen
title, you
to
can move
to another CHAPTER/TRACK
VCD1.1
disc has
a menu screen
one
follows:
as
chapter/track
If
than
more
Press DISPLAY when
the TV screen, and playback
If playback does not start,
menu
disc has
press the appropriate numbered button
select a title number.
sure
on
press PLAY.
In some cases, the disc
a
(0-9).
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
the
and the exact
menu screen.
operating procedures
setup. See page
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
--
--
(see
"Parental Control",
DVDs may have a
on
Your
play discs that have a region code
player. The region code for this
player
will not
different from your
player is 2 (two).
To watch
a
recording,
page 19).
region code.
DVD while
performing
1 Press .
The
player
or
VCD2.0
DVD
>
during
VCD1.1
pause.
will enter SLOW mode.
or
> to select the
required speed:
1/16, t 1/8, t 1/4 or t 1/2 (backward),
T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
or
t
T 1/16,
Note
Slow motion
a
rapid
code must
be entered and/or the disc must be authorized
--
Slow Motion
2 Use the .
Notes
--
press the buttons in
for
menu
You also may set PBC to Off under
18.
two-digit numbers,
succession.
may differ depending on the disc.
Follow the instructions on the each menu screen.
using
Note
For
playback
in
reverse
is not
applicable
for
Video CD.
timer
press TV/VCR.
23
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
The
1 To
Frame-by-frame playback
VCD1.1
1 Press PAUSE
2 You
Video CDs
(continued)
PAUSE
Search
repeatedly
VCD2.0
DVD
1 Press and hold .
or
the remote control.
on
> for about two seconds
a
setup
1 Press RANDOM
during playback or in stop mode.
automatically begins Random Playback and
Tips
By pressing
playback, press RANDOM
disappears on the TV screen.
Video CD with PBC, you must set PBC to Off on the
menu to use the Repeat function. See page 18.
Repeat
A-B
A*
To
AB
repeat
a
VCD2.0
DVD
sequence in
a
title:
1 Press A-B at your chosen
A- appears
2 Press A-B
briefly
the TV
on
starting point.
screen.
at your chosen end point.
on the TV screen, and the repeat sequence
repeat appears on the player's display).
again
briefly
Time Search
until
1 Press DISPLAY
play
>
or
unit selects another title
Random
during
(track) and
VCD1.1
OFF
0:16:57
DVD
appears
on
playback,
resumes
-:--:--
the
Random
the
playing
on-screen
at
dis-
screen.
elapsed playing
time of the
current disc.
2 Within 10
playback.
The
during playback.
The Time Search box shows the
.
screen.
The Time Search function allows you to start
any chosen time on the disc.
screen.
2 To return to normal
"RANDOM"
the TV
3 To cancel the sequence, press A-B.
VCD1.1
the TV
on
Repeat mode, press REPEAT a third time.
Repeat Off icon appears on the TV screen.
begins (a-b
on
All icon appears
Repeat
A-B appears
mode, press PLAY.
"RANDOM" appears
a
Note
On
required speed: mX2, mX4, mX16, mX100
(backward) or MX2, MX4, MX16, MX100
(forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
The unit
screen.
repeat the disc currently playing, press REPEAT
The
VCD1.1
Karaoke DVD
the TV
on
3 To exit
The player will now go into SEARCH mode.
2 Press and hold . or > repeatedly to select the
Random
Track icon appears
Repeat
The
by
during playback.
3 To exit SEARCH
The
second time.
will now go into PAUSE mode.
advance the picture frame-by-frame
pressing
repeat the track currently playing, press REPEAT.
2 To
during playback.
player
can
Track/All/Off
Repeat
-
seconds, press 3/4
Search icon in the
on-screen
to select the Time
display.
The "-:--:--" appears in the Time Search box.
Note
This function
only
works with DVD Karaoke discs and
3 Within 10
video CD without PBC.
the
seconds,
required
onds from left to
Repeat
DVD
VCD2.0
the number buttons to enter
right
hours, minutes, and
sec-
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
VCD1.1
CHAPT
ALL
TRACK
use
start time. Enter
TITLE
4 Within 10
OFF
seconds, press SELECT/ENTER
to confirm
the start time.
DVD Video Discs
1 To
-
Playback
Repeat Chapter/Title/Off
an
starts from the selected time
REPEAT.
Repeat Chapter
icon appears
on
the TV
repeat the title currently playing, press REPEAT
The
Repeat
3 To exit
The
the disc. If you enter
current
point.
a
This unit
can
DVD
produce
a
3D SUR
NORM.
3D Surround effect, which
playback from two
simulates multi-channel audio
Title icon appears
Repeat mode,
Repeat
3D Surround
screen.
second time.
on
the TV
screen.
press REPEAT
Off icon appears
on
the TV
a
third time.
screen.
conventional stereo
five
more
speakers, instead of the
speakers normally required to listen to
multi-
channel audio from
1 Press DISPLAY
a
home theater
3 Press 1/2
selected.
or
system.
during playback.
2 Press 3/4 to select "NORM."
24
on
time, playback will continue from the
repeat the currently playing chapter, press
The
2 To
invalid
repeatedly
or
"3D SUR".
until the desired sound is
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
VCD1.1
during playback
or
still
playback
discs: Menus
to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the
increases up to six times.
2 Use the 1 2
zoomed
3 4
move
the
through
picture.
3 Press CLEAR to
the
buttons to
normal
resume
playback
or
DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select
option. Or, use the 1/2/3/4 buttons to highlight your
selection, then press SELECT/ENTER.
level
magnification
return to
paused image.
1 Press TITLE.
If the current title has
screen.
zoom
The
zoom
function may not work for
function may not work on
some
DVDs.
2 The
3 To
DVD
VCD2.0
menu, the
list
menu can
menu
menu
will appear
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
the
on
may appear.
again.
VCD1.1
DVD
Disc Menu
MARKER SEARCH
1/9
a
Otherwise, the disc
and subtitle
multi-angle
scenes.
Marker Search
an
DVD
Title Menu
Note
The
DVD
the contents of DVD Video
Checking
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
(continued)
1 Press DISC MENU.
You
can
nine
points
To enter
1
start
playback
from
memorized
a
point. Up
to
be memorized.
can
mark, follow these steps.
a
The disc
2 To
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
memorize.
The Marker icon will appear
2
Repeat step
on
the TV
1 to enter up to nine Marker
points
1
a
on a
Marked Scene
disc
During
playback,
The MARKER SEARCH
menu
will appear
on
a
the
screen.
Marker
to
1/1
recorded at different
different
camera
angles, you
change
angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
will start from the Marked
Changing
num-
a
angle
camera
appears
on
the
a
display.
1
the Audio
Language
DVD
ENG
D
6CH
3 Press SELECT/ENTER.
Press AUDIO
scene.
ferent audio
remove
scenes
The number of the current
seconds, press 1/2 to select
ber that you want to recall.
4 To
DVD
again.
press SEARCH.
2 Within 10
Playback
Angle
can
disc.
To Recall
displayed.
the disc menu, press DISC MENU
If the disc contains
briefly.
screen
is
menu
remove
the MARKER SEARCH menu, press
repeatedly during playback
language or audio track.
to hear
a
dif-
SEARCH.
Subtitles
To clear
a
DVD
1
ENG
Marked Scene
Press SUBTITLE
1
During
disc
playback,
The MARKER SEARCH
2
menu
will appear
on
the
different subtitle
screen.
repeatedly during playback
languages.
to
see
the
Press 1/2 to select the Marker number that you want
to
3
press SEARCH.
Note
erase.
If
Press CLEAR.
appears, the feature is not available
on
the disc.
The Marker number will be erased from the list.
4
Repeat steps
2 and 3 to
erase
additional Marker
numbers.
5
To
remove
the MARKER SEARCH menu, press
SEARCH.
25
OPERATION
with Audio CD and MP3 Discs
Operation
Playing
The DVD
Audio CD and MP3 discs
an
Player
CD-ROM, CD-R,
Before
Insert
1
The
a
on
read the notes
recordings,
on
CD
player
will
screen.
Program
TRACK 2
TRACK 3
TRACK 3.MP3
TRACK 4
TRACK 4.MP3
TRACK 5
TRACK 5.MP3
TRACK 6
TRACK 6.MP3
TRACK 7
TRACK 7.MP3
Clear All
3 Search
speed
1
To
The unit
the current track's
stop playback
at any other
CD
elapsed playing
2 To return to
edly
time, press
To
during playback.
press PLAY
or
press PAUSE
again.
Moving
or
when
playback
automatically begins
the
on
Random
Playback
and
menu screen.
until "RAND."
playback, press RANDOM repeatdisappears on the menu screen.
repeat
A-B
a
CD
sequence.
During disc playback,
ing point.
The
Repeat
icon and "A
press A-B at your chosen start-"
appears
the
on
menu screen.
2 Press A-B
CD
to another Track
Press BACKWARD .
Press . twice
briefly
to
MP3
FORWARD >
or
during playback to go to the next track
the beginning of the current track.
step back
or
briefly
to return to
to the
previous
again at your chosen end point.
The Repeat icon and "A B" appears on the menu screen,
and the sequence begins to play repeatedly.
3 To exit the sequence and return to normal
A-B again.
The
Repeat
icon and "OFF" appear
3D Surround
on
the
play,
press
menu screen.
CD
track.
In
of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
case
during playback.
2 To
CD
Repeat
on a
produce
on
a
3D Surround effect, which
playback from two
conventional stereo
five
more
speakers, instead of the
speakers normally required to listen to
multi-
1 Press DISPLAY
Track icon appears
repeat all tracks
can
simulates multi-channel audio
a
home theater
MP3
repeat the track currently playing, press REPEAT.
The
This unit
channel audio from
Repeat Track/All/Off
1 To
the
menu screen.
disc, press REPEAT
a sec-
or
AUDIO
repeatedly
system.
during playback.
2 Press 1/2 to select "NORM."
3 Press 3/4
selected.
or
or
"3D SUR".
until the desired sound is
ond time.
The
Repeat
3 To cancel
The
Repeat
ALL icon appears
Repeat mode,
on
the
menu screen.
press REPEAT
OFF icon appears
on
the
a
third time.
menu screen.
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear a
(STEREO, LEFT, or RIGHT).
different audio channel
26
is
STOP.
MP3
playback,
during playback
2 To return to normal
1
1 Press PAUSE
the
CD
"RAND." appears
Repeat
Pause
on
stopped.
track then press PLAY.
time will appear on the display.
Playback will stop at the end of the disc.
3
indicated
menu
starts.
During playback,
are
mode, press PLAY.
1 Press RANDOM
2 Playback
MX2, MX4, MX8
OFF
Random
a
or
and direction
4 To exit SEARCH
MP3
Press 3/4 to select
required speed: mX2,
Clear All
56:35
menu
FORWARD >
menu screen.
TRACK 8.MP3
NORM.
or
(forward).
MP3
TRACK 2.MP3
FORWARD >
go into SEARCH mode.
now
mX4, mX8 (backward)
TRACK 1.MP3
Audio CD
or
during playback.
to select the
repeatedly
the TV
on
Program
STER.
The
tray.
TRACK 1
TRACK 8
for about two seconds
2 Press and hold BACKWARD .
disc and close the
appears
CD
1 Press and hold BACKWARD .
MP3
page 30.
menu
0:56:35
recordings
CD-RW discs.
or
MP3
playing
Recordings on
MP3 formatted
play
can
Search
CD
Programmed Playback
Programmed Playback
CD
VCD2.0
MP3
with Audio CD
VCD1.1
Note
Program allows you to store your favorite
particular disc in the player memory.
contain 32 tracks
Program can
(MP3 disc).
tracks for
On
a
The
2
(Audio CD)
or
is
displayed
on
the TV
on
Insert Video CD and close the tray.
2
screen.
Press PROGRAM
during playback or in
the Program Edit mode.
mode to enter
Video CD with PBC, you must set PBC to Off on the
menu to use the Program function. See page 18.
60 tracks
1
menu
Press PROGRAM while
The VCD
Program
the stop
playback
is
stopped.
will appear.
menu
VCD
Program
E
TRACK 1
TRACK 2
E
The
a
setup
Insert the disc and close the tray.
1
with Video CD
Programmed Playback
and MP3 Discs
mark will appear to the right of the word
the right side of the menu screen.
Program
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
Clear All
TRACK 8
Note
Press PROGRAM to exit the
mark will
3
disappear.
Note
Press 3/4 to select
SELECT/ENTER to
the
E
Edit mode; the
Program
a
3 to
step
4 Repeat
Program list.
3
place
additional tracks
on
Program
MP3
TRACK 1.MP3
TRACK 8.MP3
TRACK 8
TRACK 2.MP3
TRACK 2.MP3
TRACK 3
TRACK 10
TRACK 3.MP3
TRACK 4.MP3
TRACK 4
TRACK 3
TRACK 4.MP3
TRACK 3.MP3
TRACK 5
TRACK 5.MP3
TRACK 6
TRACK 6.MP3
TRACK 7
Follow
To
STER.
NORM.
56:35
REPEAT
MP3
menu
track you selected last is
highlighted
on
Press 3/4 to select the track you want to start
6 playing.
move
Press DISC MENU to
7
with
left.
Tracks
the
on
menu screen.
on
All icon appears
Repeat mode,
Off icon appears
Repeat
the
on
menu screen.
press REPEAT
the
on
a
third time.
menu screen.
menu
the program list.
Press TITLE to
a
OFF
Erasing
programmed
on
the program list, press
second time.
Repeat
To cancel
1
"Programmed Playback
Track icon appears
Repeat
The
Press 2.
The
3-7 of
repeat all tracks
Clear All
TRACK 8.MP3
menu.
repeat the track currently playing, press REPEAT.
The
The
5
steps
Audio CD and MP3 Disc"
To
E
TRACK 7.MP3
Clear All
TRACK 8
Program
the
Program
TRACK 12
TRACK 2
Audio CD
PROGRAM to exit the
Repeat Programmed
E
TRACK 1
0:00:14
or
on
list.
Program
CD
track, then press
place the selected track
Press RETURN
a
Track from
1 Press PROGRAM
mode to enter the
E
The
Program
List
during playback or in
Program Edit mode.
the
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
to the next page.
move to the previous page.
stop
erase
4 Press CLEAR.
Press PLAY to start.
The track will be erased from the
in the order in which you programmed
the tracks and "PROG." appears on the display window.
Program
list.
Playback begins
Playback stops after
have played once.
all of the tracks
on
the
Program
list
the
Erasing
1 Follow
List"
steps
as
Complete Program
1-2 of
"Erasing
a
List
Track from
Program
above.
2 Use 3/4 to select "Clear
All", then press
SELECT/ENTER.
The
complete Program
The programs
To
resume
are
for the disc will be erased.
also cleared when the disc is removed.
normal
playback
from
programmed
playback
Press and hold PROGRAM for 3 seconds until "PROG."
indicator
disappears
in the
display
window.
27
OPERATION
Additional
On Screen
Operation
VCR part
-
Video Doctor
Display
You may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your VCR will appear on the TV screen. If a recording
is taking place these On Screen Displays will not be
recorded onto the
tape.
(Self-Diagnosis)
This feature informs you that there is a problem with
your VCR. These error messages will appear on the TV
screen.
1
Press i.
Press 1
or 2
to select Dr.
Press OK.
1
Press CLK/CNT to
display.
repeatedly
Press CLK/CNT
The
display options.
to
the
cycle through
counter and amount of
tape
tape left will appear if there is
a
tape loaded.
12
REC
After 3 seconds the
2 Displays
will clear
majority of the
leaving only the
counter and the amount of
On Screen
clock
tape left
ON
OFF
Pr-12
+
16:9
4:3
TIME
DATE
ACMS
SYSTEM
AB
C
OSD
VCR
VCR
Dr.
Dr.
NIC
-
DECODER
OKi
OPR
tape
or
the
on
P
SET
R
fOSD
screen.
VCR
Press CLK/CNT
the TV
again
to
all
remove
displays
from
Dr.
VIDEO DOCTOR
HEAD STATUS
screen.
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
OK
Tape Counter Memory Stop
The
Digital Tape
i
be displayed on the display
by pressing CLK/CNT on
Digital Tape Counter indicates
recordings on the tape.
Counter
can
window instead of the time
the remote control. The
the relative
positions
of
2
Press
3 or 4
to check
a
problem.
HEAD STATUS
O
PLEASE CLEAN:
Clean your video heads.
1
Press CLK/CNT.
TAPE STATUS
Press CLEAR to set the counter to 0:00:00.
Press PLAY
The
or
start
counter will
recording.
display the
tape
hours, minutes and seconds.
O
actual
play
NOT RECORDABLE:
Insert
time in
a
tape with its protection tab in place
NO. OF TIMER PROGRAMME
O2
2
Press STOP when
playback
or
recording
is
Shows the number of timer
complete.
Press BACKWARD.
The
recording.
NEXT TIMER PROGRAMME
tape will rewind and automatically stop when
O
the counter returns to 0:00:00.
PR-01 26 10:00~11:00SP
Shows the current status of timer
recording.
Press i.
Child Lock
The control buttons
switched off
using
1
on
the front of the VCR
that your VCR
the remote control.
so
can
only
be
can
be
operated
will appear in the display window.
None of the buttons on the front of your VCR will
STOP and
(except
If any buttons
on
(easy) repeat
By pressing & holding ez REPEAT during play back,
holding section is replayed twice automatically.
Press C.LOCK.
work
ez
EJECT).
the front of your unit
will flicker in the
display
are
window for
a
1
few
2
Release
2
will
again to switch off the child
disappear in the display window.
REPEAT at the
ez
REPEAT at the
reverse
point
search.
where
repeat play
holding
section is
replayed
twice
automatically.
lock.
Note
Pressing
ez
REPEAT
return to normal
28
ez
is to start.
The
Press C.LOCK
& hold
is to be concluded.
Then, your VCR will go into
pressed
seconds.
During play back, press
point where repeat play
the
play.
again during repeat play,
will
Additional
Operation
Hi-Fi Stereo Sound
VCR part
-
System
2
Press D
or
E
Your VCR will record and
AUTO:
In addition it has
Automatically plays
playback Hi-Fi stereo sound.
digital stereo sound
to record and playback the
stereo NICAM
a
decoder. This allows you
sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track
or
programmes
Wide-Screen and Normal
programmes
as
normal.
Your VCR's NICAM
digital
or
and
recording
Normal format
16:9:
another Hi-Fi VCR.
Only
for
format
1
4:3
back Wide-Screen
as
Only for playing back
recordings (4:3).
and two VHS Hi-Fi stereo audio tracks. These stereo
system, video disc
AUTO,
4:3
tracks allow you to make audio recordings in Hi-Fi
stereo or bilingual mode from a TV broadcast, stereo
audio
to select:
repeatedly
16:9.
playing back and recording
recordings (16:9).
Wide-Screen
sound decoder allows
you to enjoy broadcasts with NICAM sound, as well
as standard stereo, bilingual and mono sound. The
particular type of sound received or that recorded
briefly displayed on the TV screen for a
couple of seconds:
12
will be
REC
Pr-12
PSET
R
ON
OFF
AUTO
ACMS
fOSD
+
16:9
4:3
AB
C
VCR
OSD
Dr.
16:9
4:3
4:3
16:9
-
DECODER
i
STEREO NICAM
Sound is
and
automatically
recorded
tracks of the video
mono
the Hi-Fi stereo
on
tape.
3
Both audio channels will be recorded
stereo tracks. The
will be recorded
the
remove
the
mono
menus
from the TV
Wide-Screen
playback you
the TV using a
screen.
must
SCART cable.
the Hi-Fi
channel
primary language
on
on
(left)
To set the decoder
track of the video
We have
tape.
The sound is recorded
mono
already described, how to connect a decoder
pay-TV station as CANAL+ or PREMIERE on page
9. For the recording of an encoded station you do not
have to control anything. You just select the station and
wait shortly until the decoding will start.
for
MONO
track of the video
Press AUDIO
on
the Hi-Fi tracks and the
tape without any separation.
repeatedly
until the desired audio
mode appears.
3
enjoy
connect your VCR to
BIL NICAM
2
Press i to
To
1
Press F
The choice is STEREO, LEFT, RIGHT and MONO.
In BIL NICAM playback the primary language is
output onthe left channel and the secondary channel is output simultaneously from the right channel
when audio output is set to STEREO. The primary
language willbe output from both channels when the
audio
setting
adjusting
the
tracking
control
Your VCR
will appear
on
the TV
screen.
G to select the DECODER.
Press OK.
2
Press D
or
E to select.
ON: When the decoder is connected to the AV2
socket.
Compatibility
socket.
Press i to return to
Hi-Fi stereo sound may revert to MONO.
Wide Screen
menu
or
OFF: When another VCR is connected to the AV2
is MONO.
Please note that when
Press i.
The main
a
TV
picture.
16:9
record and
play back wide screen aspect
(16:9). To record a wide screen format programme successfully the correct type of wide
screen signal must be broadcast by the TV station.
can
ratio programmes
1
Switch
your VCR.
on
Press i.
Press F
or
G to select 16:9/4:3.
Press OK.
12
Pr-12
REC
PSET
R
fOSD
ON
OFF
ACMS
+
16:9
4:3
TIME
DATE
DECODER
SYSTEM
NIC
-
OPR
AB
C
VCR
OSD
Dr.
12
REC
16:9
4:3
OKi
PSET
R
fOSD
ON
OFF
Pr-12
ACMS
+
16:9
4:3
-
DECODER
AUTO
4:3
16:9
AB
C
OSD
VCR
Dr.
16:9
4:3
i
29
OPERATION
Additional
Operation
Last Condition
DVD
This
CD
player
-
DVD
part
Notes
Memory
VCD1.1
on
MP3 Discs
About MP3
memorizes the last condition for the last
An MP3 file is audio data
disc you have watched. Settings remain in memory
even if you remove the disc from the player or switch off
files that have the
the
The
If you load a disc that has its settings memorized, the latest stop position is automatically recalled.
player.
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
it.
Screen Saver
Player
Video Mode
VCD2.0
interpolation
or
change
displayed on the TV screen.
quality has improved. If not,
procedure until picture quality is
repeat the above
change
MODE1
→
MODE2
MODE5
→
MODE1
→
→
system.
MP3 files in the first
MP3 file in the 1st track, it
playback
can-
playback
MP3
use a new
We do not recommend
7.
File
and
8.
using CD-RW discs.
only.
names should be named using 8 letters
must incorporate the ".mp3" extension
Please
finished CD-R discs
e.g. "********.MP3".
Do not use special characters such
"_?!><+*}{`[@ ]:;\/.,"
etc.
Total number of files
on
or
less
as
the disc should be less than
200.
sequence:
MODE3
ISO9660 file
one.
6.
9.
improved.
no
an
requires
MP3 files. If you wish to
files, format all the data in the disc or
not
mode number selected is
Check whether the video
creates
session disc
track. If there is
about 3 seconds
Video mode
single
use
the video mode, press and hold DISPLAY
during disc playback. The new video
is
player
-
Creator", which
video mode.
To
with this
A
De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
a
5.
VCD1.1
With certain discs, the playback picture may be flickering or Dot Crawl is shown on straight lines. That
Vertical
fake MP3 file that has
4.
picture
DVD
a
Sampling Frequency / only at 44.1kHz
Bit rate/ within 32 320kbps
CD-R physical format should be "ISO 9660"
If you record MP3 files using the software which
cannot create a FILE SYSTEM, for example "DirectCD" etc., it is impossible to playback MP3 files. We
therefore recommend that you use "Easy-CD
3.
Setting
not read
follows:
as
file
a
".mp3".
compatibility
appears when you leave the
in stop mode for about five minutes.
screen saver
means
can
MP3 file that has
an
".mp3".
limited
1.
DVD
player
file extension "MP3 files".
".mp3"
not read
MP3 Disc
2.
The
can
file extension
Notes
--
player
extension other than
The
--
compressed by using
MPEG1, the audio layer-3 file-coding scheme. We call
MODE4
→
If you turn off the the power, the video mode will be
back to initial state (MODE1).
10. Use 74 minute CD-R discs
minute CD-R
This DVD
(700M)
(650M),
do not
use
80
software.
player requires discs/recordings
to meet
certain technical standards in order to achieve
playback quality.
Pre-recorded DVDs
set to these standards. There
of recordable disc formats
MP3
are
are
optimal
automatically
many different types
CD-R containing
(including
files).
Customers should also note that
permission
is
required
in order to download MP3 files and music from the
Internet. Our company has no right to grant such permission. Permission should always be sought from the
copyright
30
owner.
Special Recording
Copying
from DVD To VCR
This unit allows you to copy the contents of
VHS tape with a press of the COPY button.
Recording
a
DVD to
a
recorder
protected,
1
2
to copy is copy
not
be
able
to copy the disc.
you may
Insert
a
blank VHS
videotape
Press the COPY button
If the DVD disc
the
into the VCR deck.
Play
Copy
B.
used for
will be referred to
menu
button
1
Tape
on
the unit front
panel.
as
VCR A.
VCR A should be connected to the SCART socket
on
the
to
begin copying.
panel
panel of
rear
of your unit
your unit.
Insert the recorded
2 tape
appears, you may need to
manually
or
the AV sockets
tape into VCR A and
a
on
blank
into VCR B.
3
To start
press the REC/ITR
VCR A.
4
When you want to finish
on both video recorders.
recording,
and PLAY
on
on
VCR B
Process
playing, press the VHS
the remote control and then press the
STOP button to end the copy.
on
You must
camcorder.
following description, this video recorder will be
recording and will be referred to as VCR
The other appliance will be used for playback and
one
the front
When the DVD is finished
button
from
Note
The DVD will go into Play mode and the VCR will
go into Record mode.
press the
recordings
from another video
Tape
the DVD to VHS
3 Copy
make
In the
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
Insert VHS
or a
can
copying
attempting
are
Insert Disc
4 Stop
recorder
With this video recorder you
an external source, such as
Note
If the DVD you
from another video
copying,
press the STOP
stop the Copy process manually when
the DVD movie ends,
record over and over
or
the unit may
replay
and
again.
31
OPERATION
Troubleshooting
Check the
following guide
for the
possible
cause
DVD
or
properly.
VCR do not
before
problem
a
DVD
or
Correction
VHS button is not switched
Refer to page 2.
properly.
No power.
The power cord is disconnected.
The power is on, but
the DVD player does
No disc is inserted.
Plug the power
securely.
Insert
signal
the TV
player
equipment
are
not connected
The power of the equipment connected
with the audio cable is turned off.
Turn
Digital Audio Output
position.
The disc is
An
is set to the
The disc is
so
on
the
equipment
jacks
connected with
the audio cable.
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
Clean the disc.
dirty.
unplayable
jacks
Connect the audio cable into the
securely.
The TV channels
player
playback.
screen.
input mode of the
you can listen to the
sound from the DVD player.
audio receiver
securely.
The
not start
the TV
Select the correct
connected with the
wrong
does
on
appears
Connect the video cable into the
The audio cables
The DVD
appropriate video input mode
the picture from the DVD
so
securely.
The
is poor.
display
securely.
signal output.
picture
that the DVD or,
The video cable is not connected
audio cable is not set to receive DVD
The
(Check
lit.)
Select the
on
output.
No sound.
disc.
window is
The TV is not set to receive DVD
picture.
a
cord into the wall outlet
audio CD indicator in the
not work.
No
service.
contacting
Cause
Symptom
work
of
are
not tuned in
properly.
Insert
tuning,
carry out
tuning again.
playable disc. (Check
type and Regional code.)
disc is inserted.
placed upside
Check
Place the disc with the
down.
the disc
a
playback
side
down.
The disc is not
placed
within the
guide.
Place the disc
inside the
dirty.
The
level is set.
Cancel the
the
The remote control
There is
does not work
remote control and this unit.
properly.
an
the disc
tray correctly
Clean the disc.
The disc is
Rating
on
guide.
obstacle in the
path
of the
The batteries in the remote control
are
Rating
function
or
change
level.
rating
Remove the obstacle.
Replace
the batteries with
new ones.
exhausted.
Video
tape
cannot be
Is the cassette
compartment empty?
Eject
the
tape in.
inserted.
No Hi-Fi sound
Audio mode is not set
properly.
Select "STEREO"
"AUDIO"
No NICAM sound
recording
NICAM mode is not set
properly.
Make
on
sure
by repeatedly pressing
the remote control.
NICAM in the
menu
is set to
AUTO for the station to be recorded.
Video Head
Cleaning
accumulating on the head after a long period of time can cause the playback picture to
up. High quality video cassette tapes will not normally deposit dirt onto the video head, but
might. Clean the video heads with a commercially available video heads cleaning tape.
Dirt
32
become blurred
old
or
or
broken
damaged tapes
Language Code
Enter the
appropriate
(See page 17).
List
code number for the initial
Code
Language
Code
6566
Abkhazian
6565
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
Language
Code
Language
Code
7074
Language
Fiji
7678
Lingala
8373
Afar
7073
Singhalese
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
33
Code List
Country
Enter the
appropriate
code number for the initial
setting "Country
Code"
(See
page
19).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
Coast
IN
India
NU
Niue
IO
British Indian Ocean
NZ
New Zealand
US
United States
Territory
OM
Oman
UY
Uruguay
Kingdom
Outlying
CI
Ivory
CK
Cook Islands
CL
Chile
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Verde
Anguilla
Islands
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
34
Republic
Islands
(French)
State
(British)
(USA)
DC593NSQ
NA9SSL_Eng_Correction
Specification
General
Power
requirements
AC 200-240V, 50 Hz
Power
consumption
23W
Dimensions
Mass
430 X 97.5 X 360
(approx.)
5.4
(approx.)
mm
(w/h/d)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
(41˚F
to
REF NC
95˚F)
display tape
System
Laser
Semiconductor laser,
Video Head
Double azimuth 6 heads, helical
system
wavelength
650
scanning.
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Inputs (VHS)
Audio
Video
-6.0dBm,
-6.0dBm,
more
than 10 kohms
more
than 47 kohms
1.0
75
Vp-p,
(SCART)
(RCA)
ohms, unbalanced (SCART/RCA)
Outputs (DVD)
VIDEO OUT
1
Vp-p
75
ohms, sync negative
Audio
output (digital audio)
0.5V(p-p),75 ,RCAjackx1
Audio
output (analog audio)
2.0 Vrms
(1 KHz,
0
dB),
330
,
RCA
jack (L, R)x1/SCART (TO TV)
Outputs (VHS)
Audio
-6.0dBm, less than 1 kohms (SCART)
Video
1.0Vp-p,
Design
and
specifications
are
subject
to
change
75
ohms, unbalanced (SCART)
without notice.
Manufactured under license from
Confidential
unpublished
"DTS" and "DTS
Digital
works.
Out"
are
Dolby Laboratories. "Dolby" and the double-D symbol are trademarks
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
trademarks of
Digital
Theater
Systems,
of
Dolby
Laboratories.
Inc.
35
P/NO
:
3834RP0080B
Download PDF

advertising