DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
DVS7920
PAL
Before
connecting, operating
or
adjusting this product,
carefully and
read this instruction booklet
please
completely.
Precautions /
Safety
notes on
Important
CAUTION
Notes
on
copyrights:
It is forbidden
by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyright material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
this unit
controlling
(OR BACK)
discs.
NO USER-SERVICEABLE PARTS INSIDE
This
REFER SERVICING TO QUALIFIED SERVICE
product incorporates copyright protection technology that
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
is
PERSONNEL.
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
This
an
shock to persons.
SERIAL NUMBER: The serial number is found
on
the back of
this unit. This number is
The exclamation mark within
is intended to alert the
user
an
equilateral triangle
to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
to
___________________________________
___________________________________
Features:
TRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
?
Complete versatility
Tapes.
?
Watch
?
?
DVD while
recording
or
VHS
TV show to the VCR.
a
Remote controls both DVD and VCR decks.
Records from DVD to VHS
with
?
a
play DVD, VCDs, audio CDs
to
(unless
DVD is copy
protected
Macrovision).
Hi-Fi Stereo VCR.
CAUTION:
This
To
Digital Video Disc Player employs
ensure
manual
proper
use
of this
Laser
System.
product, please read this owner's
a
carefully and retain for future reference, should the
unit
contact an authorized service location-
require maintenance,
service procedure.
see
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The
apparatus shall not be exposed to water,
splashing and that no objects filled with liquids,
or
such
vases, shall be
as
This
product
notes on
controlling
placed
on
This unit
uses one
set of controls to
operate both DVD
following buttons are helpful
successfully controlling each part.
1
2
comply
Press the POWER button
panel
on
the remote control
DVD Button
Press DVD button
on
the remote control when you
The DVD indicator will
display
3
light
on
the front
panel
to show that the DVD is selected.
VCR Button
Press the VCR button
on
the remote control when
you want to control the VCR.
The VCR indicator will light on the front
display
panel
to show that the VCR is selected.
DVD/VCR Button
4 Press the DVD/VCR button
toggle
2
or
to turn on this unit.
want to control the DVD.
with the
radio interference requirements of EEC DIRECTIVE
89/336/EEC, 93/68/EEC and 73/23/EEC.
in
POWER Button
front
the apparatus.
is manufactured to
this
unit
and VCR. The
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous
dripping
Important
on
the front
panel
control between the DVD and the VCR.
to
Contents
Introduction
SafetyPrecautions.........................2
2
Important notes on controlling this unit
.
.
.
.
.
.
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Operation with Audio CD and MP3/WMA Disc
PlayinganAudioCDandMP3/WMADisc.
NoteonMP3/WMARecordings.
.
26-27
.
.26
.26
Pause.............................27
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTrack...............27
RepeatTrack/All/Off...................27
Precautions.............................5
NotesonDiscs..........................5
Search.............................27
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
RepeatA-B.........................27
.
.
.
.
.
.
.
.
.
.
.
.
RemoteControl............................7
RearPanel................................8
Preparation
Connections............................9-10
9
Connecting to a TV & Decoder (or Satellite)
.10
ConnectingtoOptionalEquipment.
.11-15
BeforeOperation-VCRpart.
.11
TuninginavideochannelonyourTV.
.11
UsingyourVCRveryfirsttime.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SettingtheclockManually.................12
Tosetthecoloursystem..................12
Howtousingthemainmenu...............13
.13
TuninginTVStationsAutomatically.
.14
TuninginTVStationsManually.
.15
ChangingtheotherofTVStations.
DeletingTVstations......................15
.16-19
BeforeOperation-DVDpart.
GeneralExplanation......................16
On-ScreenDisplay.......................16
InitialSettings........................17-19
17
Initial Settings General Operation.
Language..........................17
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................17
Sound.............................18
Others............................18
ParentalControl......................19
Operation
OperationwithTape.....................20-22
Playingatape..........................20
.20
CM(CommercialMessage)Skip.
.20
OPR(OptimumPictureResponse).
.21
InstantTimerRecording(ITR).
22
Timer recording using On Screen Display.
.23-25
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............23
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3DSurround........................27
.27
ChangingtheAudioChannel.
OperationwithJPEGDisc...................28
ViewingaJPEGdisc.....................28
Movingtoanotherfile.................28
.
.
.
.
.
.
.
.
.
.
StillPicture.........................28
.
.
.
Random...........................27
.
.
Toflipthepicture.....................28
Torotatepicture......................28
.28
NotesonJPEGRecordings.
ProgrammedPlayback.....................29
Programmed Playback with Audio CD and MP3/WMA Discs 29
.29
ProgrammedPlaybackwithVideoCD.
.29
RepeatProgrammedTracks
.29
ErasingaTrackfromProgramlist.
29
Erasing the Complete Program list.
.30-31
AdditionalOperation-VCRpart.
OnScreenDisplay.......................30
TapeCounterMemoryStop................30
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ChildLock.............................30
.30
VideoDoctor(Self-Diagnosis).
ez(easy)repeat.........................30
Hi-FiStereoSoundSystem................31
.31
WideScreenCompatibility16:9.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Tosetthedecoder......................31
.32
AdditionalOperation-DVDpart.
LastConditionMemory...................32
.
.
.
.
.
.
.
.
.
.
.
.
ScreenSaver...........................32
SpecialRecording.........................33
CopyingfromDVDtoVCR.................33
33
Recording from another video recorder
.
.
.
.
.
.
.
Reference
Troubleshooting..........................34
LanguageCodeList.......................35
CountryCodeList.........................36
Specification.............................37
GeneralFeatures........................23
MovingtoanotherTITLE...............23
23
Moving to another CHAPTER/TRACK
.
.
.
.
.
.
.
About the
.
SlowMotion.........................23
24
Still Picture and Frame-by-Frame Playback
Search.............................24
Random...........................24
.
Repeat............................24
RepeatA-B.........................24
symbols
for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
TimeSearch........................24
3DSurround........................24
Zoom..............................25
MarkerSearch.......................25
SpecialDVDFeatures....................25
TitleMenu..........................25
DiscMenu..........................25
CameraAngle.......................25
.25
ChangingtheAudioLanguage.
.25
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles...........................25
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In addition, this unit
play
can
a
DVD-R, DVD±RW,
Kodak PICTURE CD and CD-R
audio titles, MP3, WMA
(DVD only)
DVD
or
or
CD-RW that contains
JPEG files and SVCD also.
or
accompanying
feature content
additional feature content, or music album. Each title
is assigned a title reference number enabling you to
locate it easily.
Chapter (DVD only)
Sections of a picture
or a
musical
piece
that
are
smaller
than titles.
A title is
composed of one or several chapters. Each
assigned a chapter number, enable you to
locate the chapter you want. Depending on the disc, no
chapters may be recorded.
is
chapter
Notes
--
Depending
the conditions of the
recording equip(or DVD-R/±RW) disc itself,
some CD-R/RW (or DVD-R/±RW) discs cannot be
played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregular shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
on
ment or the CD-R/RW
--
--
Notes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be avail-
Track
(Video
Sections of
enabling
On
Regional
player
player is designed and manufactured
for playback of region "2" encoded DVD soft2
ware. The region code on the labels of some
DVD discs indicates which type of player can play those
discs. This unit can play only DVD discs labeled "2" or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
This DVD
4
on a
a
video CD
track number,
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
Types
There
of video CDs
are
two
with the
and DVDs
only)
piece
assigned
musical
Scene
Video CDs. Some DVDs made for business purposes
may not be played on the unit.
code of the DVD
or a
you to locate the track you want.
Video CDs
or
CD and audio CD
picture
audio CD. Each track is
or an
other functions may be added.
Refer also to the instructions applied with the DVDs and
able,
a
PBC
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
Video CDs not
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Cont'd)
Precautions
Storing
After
the unit
Handling
When
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
The
When
the unit
setting
picture and sound of a nearby TV or radio may be
distorted during playback. In this case, position the unit
The
away from the TV or radio,
removing the disc.
To
keep
Do not
near
or
turn off the unit after
volatile
liquids,
contact with the unit for a
leave marks
such
as
on
long period
Cleaning
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
ter out.
plastic products in
of time. They will
the surface.
soft, dry cloth. If the surfaces
soft cloth
lightly
solution. Do not
benzine,
light, as there may be a considerable temperature
increase inside the car.
insecticide spray,
To clean the cabinet
a
store the disc in its case.
the unit
Cleaning
Use
playing,
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
the surface clean
use
the unit. Do not leave rubber of
use a
discs
are
moistened with
a
extremely dirty,
detergent
mild
strong solvents, such as alcohol,
thinner, as these might damage the surface
or
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
records.
vinyl
use
About
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
5
INTRODUC
Front Panel and
Display
Window
PAUSE( /
)
playback temporarily /
frame-by-frame playback.
Tape Eject
Pause
press
repeatedly
Forward
Skip/Scan,
for
Fast-Forward
Go to NEXT
Press and hold for two seconds for
DVD OPEN/CLOSE
Opens
or
(
Insert
a
Copy
Button
)
STOP(A)
Stops playback.
Tray
VCR Record
disc here.
Reverse
Press and hold for two seconds for
POWER
a
Switches the
fast
or
Display
-
Select
Channel
an
PLAY
item in the
Starts
menu
Remote Sensor
(FGDE).
Point the remote control here.
DVD/VCR
Selector
Programme Selectors
(PROG. DE).
Indicates current title number
Programmed playback
CHPTRK
Indicates current
chapter
or
track number
A disc is loaded in the DVD deck. (Lights when a disc is
loaded in the DVD deck and flashes when no disc is loaded.)
active.
Indicates repeat mode.
Bilingual
MP3 disc is inserted.
mode
Indicates total
VCR deck is
selected.
playing time/elapsed
The current TV show
DVD deck is
selected.
or
time/current time
video is broadcast in stereo
DVD to VHS copy is in progress
VCR
Video
CD is
inserted.
recording
is
engaged
The Hi-Fi track of
a
VHS tape is playing
Cassette-In indicator
Indicates TV
mode.
(See Notes on
page 21.)
A timer
VCR MP3
DVD RPT ALL AB
VCD
TV
6
( G)
playback.
status of the unit.
FGDE(left/right/up/down)
-
window
Shows the current
Jacks
(L/R)
search
Tape Compartment
OFF.
Video IN Jack
Audio IN
reverse
Rewinds the tape.
unit to
ON
Rewind
()
beginning of current
chapter/track or to PREVIOUS
chapter/track.
selection
menu
Skip/Scan,
Go to
ENTER
Acknowledge
fast forward search.
Winds the tape forwards.
closes the disc tray.
Disc
DVD to VCR
a
(
)
chapter/track.
PROG
TITLE CHPTRK
BIL
STEREO COPY
REC
Hi-Fi
is
recording
programmed
or
in progress
Child Lock is
engaged
Remote Control
DVD/VCR select button
Selects
operational
OPEN/CLOSE
EJECT
Open or close the the disc
mode of remote
control.
Tape Eject.
-
POWER
Switch this unit ON
or
AV
OFF.
TV/VCR
Select input
into tape.
OPEN/CLOSE
EJECT
POWER
Switch between your TV's tuner and
the VCR's internal tuner.
TV/VCR
DISPLAY
CLK/CNT
Access the On-Screen Display.
Shows you the current time
or
DVD
VCR
source
for
recording
DISC MENU
Access menu of a DVD disc.
SELECT/ENTER/OK
Acknowledge menu selection.
AV
DISPLAY
DISC MENU
RETURN
counter.
CLK/CNT
FGDE(left/right/up/down)
-
SELECT
-
OK
Select an item in the menu
Select channel programme of VCR.
SETUP
/ i
-
-
tray.
-
SETUP/ i
ENTER
REC/ITR
Record your
RETURN
?
REC/ITR
TITLE PAUSE/STEP STOP
Remove the setup menu.
menu of a video CD with PBC.
Displays the
input
sources
into tape.
Forward SKIP/SCAN (
)/
Fast Forward
Search forward* / go to next
chapter or track.
-
Access
Display
or remove
the title
menu
setup
menu.
-
BACKWARD
TITLE ?
of the disc if
PLAY
FORWARD
-
PROGRAM
available.
PAUSE/STEP (
)
playback temporarily / press
repeatedly for frame-by-frame
playback.
STOP(A)?
Stops playback.
Press and hold button for about
two seconds.
?
PLAY (G)
Starts playback.
?
Reverse SKIP/SCAN (
)/
Rewind
Search backward* / go to beginning
of current chapter or track or go
to previous chapter or track.
Rewinds the tape.
?
CLEAR
Pause
AUDIO SUBTITLE MARKER
0-9 numerical buttons
Select numbered items in
C.LOCK ANGLE
ZOOM
REPEAT RANDOM
A-B
-
-
?
*
an
language (DVD) or
audio channel (CD).
SUBTITLE
Select
a
subtitle
Mark any
ez
REPEAT CM SKIP
LP
PROGRAM
Access or remove program menu.
CLEAR
Clear a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
?
REPEAT/ez REPEAT
Repeat chapter, track, title, all.
ez REPEAT
?
language.
MARKER
-
?
point during playback.
SEARCH
MARKER SEARCH
?
-
menu.
ANGLE
Press and hold button for about
two seconds.
audio
an
Display
SEARCH
a menu.
AUDIO
Select
-
Winds the tape forwards.
*
-
?
-
Select DVD
camera
angle
if available
?
CHILD LOCK
Switch the Child Lock
on
A-B/LP
-
and off.
-
Repeat sequence.
Select the recording
speed
of the
tape.
?
RANDOM/CM SKIP
Play tracks in random order.
-
-
?
CM SKIP
ZOOM
Enlarge
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
the buttons.
Distance: About 23 ft
Detach the
AAA AAA
(7 m)
from the front of the
image.
installation
battery
cover on
the
rear
of
the remote control, and insert two R03
(size AAA) batteries
aligned correctly.
remote sensor
Angle:
battery
video
with
and
About 30° in each direction of the front of the
remote sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel
DVD/VCR AUDIO OUT
(Left/Right)
Connect to
receiver
an
amplifier,
COMPONENT VIDEO OUT
Connect to
a
or
stereo
system.
(Y Pb Pr) (DVD
inputs.
EXCLUSIVE
OUT)
TV with Y Pb Pr
AUDIO OUT
Connect to
(Left/Right) (DVD EXCLUSIVE OUT)
amplifier, receiver or stereo system.
an
EURO AV2 DECODER
Connect to
AERIAL
Video
Connect the aerial
using
this
pay-TV
decoder
Output
or
another video recorder.
Switch
Select either COMPONENT
jack.
depending
DVD EXCLUSIVE OUT
DVD/VCR
COMPONENT
AUDIO
AUDIO OUT
VIDEO OUT
OUT
R
Pr
R
L
Pb
L
on
or
SCART's RGB
VCR IN+OUT/DVD OUT
EURO AV2
DECODER
EURO AV1
AUDIO/VIDEO
COMPONENT
Y
COAXIAL
RGB
OPTICAL
(Digital audio out jack)
digital (optical) audio
equipment.
Connect to
AC Power Cord
Connect to
EURO AV1 AUDIO/VIDEO
Connect to your TV set
COAXIAL
S-VIDEO OUT
Connect to
RF.OUT
a
(DVD
EXCLUSIVE
TV with S-Video
OUT)
input.
(DVD/VCR OUT)
using this jack.
Connect to your TV
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
(VCR
or
a
power
IN+OUT / DVD
source.
OUT)
another video recorder.
(Digital audio out jack) (DVD EXCLUSIVE OUT)
digital (coaxial) audio equipment.
Connect to
signal
how you connected this unit to the TV.
Connections
DVD exclusive out connection
Tips
Depending
your TV and other equipment you wish
to connect, there are various ways you could connect
the unit.
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
For better sound
reproduction, connect this unit's
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page 10.
Make
to the TV.
this unit is connected
directly
input channel.
Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
sure
2
Connect the Left and
Make
one
of the
a
the audio
S-Video connection
Connect the S-VIDEO OUT
S-Video
input jack
jack,
1
in
left/right
Rear of this unit
on
(Component
COMPONENT
VIDEO OUT
AUDIO
OUT
R
Pr
R
L
Pb
L
DVD/VCR
AUDIO OUT
jacks,
connection)
VCR IN+OUT/DVD OUT
EURO AV2
DECODER
EURO AV1
AUDIO/VIDEO
COMPONENT
Y
COAXIAL
RGB
the SCART
input
on
the
socket
on
rear
the
lead.
Some TV broadcasters transmit encoded television
2 signals
which you can only see with a purchased or
rented decoder. You can caonnet such a decoder
1
Video
DVD EXCLUSIVE OUT
(AV)
panel of this unit to
TV using a SCART
to this unit.
Basic connection
to
audio cables.
set the TV' s
Connect the EURO AV1 AUDIO/VIDEO
(descrambler)
Right AUDIO OUT or
jacks of the DVD Player
jacks on the TV using the
DVD/VCR AUDIO OUT
INPUT to S-VIDEO.
Basic connection
jack on this unit to the
using the S-Video
the TV
on
Connect the Left and
set TV's INPUT to COMPONENT VIDEO.
using
to
audio cables.
2
following connections, depending
the S-VIDEO OUT
Right AUDIO OUT or
jacks of the DVD Player
jacks on the TV using the
in
left/right
the
When
in
cable.
TV & Decoder
capabilities of your existing equipment.
When using the COMPONENT VIDEO OUT
connection
DVD/VCR AUDIO OUT
the audio
Connecting to
(or Satellite)
(Color Stream )
jacks on the DVD Player to the corresponding
jacks on the TV using an Y Pb Pr cable.
Set the TV to the correct video
--
Video
Connect the COMPONENT VIDEO OUT
1
1
Caution
--
Component
on
(RF)
Rear of TV
AERIAL
S-VIDEO INPUT
AUDIO INPUT
L
COMPONENT VIDEO INPUT
R
Pr
Decoder
Pb
SCART INPUT
Y
(or Satellite)
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel
of this unit.
2
Connect the
supplied RF antenna cable from the
jack on the rear panel of this unit to your
television's Antenna Input.
RF OUT
DVD EXCLUSIVE OUT
DVD/VCR
AUDIO OUT
COMPONENT
AUDIO
VIDEO OUT
OUT
R
Pr
R
L
Pb
L
EURO AV2
DECODER
EURO AV1
AUDIO/VIDEO
COMPONENT
Y
COAXIAL
RGB
Rear of this unit
(Basic connection)
9
PREATION
Connections
Connecting
(Cont'd)
Optional Equipment
to
Notes
--
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic II
/Pro Logic
Connect the Left and
AUDIO OUT
this
Right
jacks
right in jacks on your amplifier,
system, using the audio cables.
on
unit to the audio left and
receiver
or
stereo
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
channel
1
Connect this unit's DIGITAL AUDIO OUT
(COAXIAL) to
amplifier. Use
the
an
jack
corresponding in jack on your
optional coaxial audio cable.
You will need to activate this unit's
2 (See "Digital
Digital
A
Audio
Output"
on
digital output.
18).
page
Multi-channel sound
digital multi-channel
quality. For this
connection
provides
the best
sound
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
Rear of this unit
DVD EXCLUSIVE OUT
DVD/VCR
COMPONENT
AUDIO
AUDIO OUT
VIDEO OUT
OUT
R
Pr
R
L
Pb
L
VCR IN+OUT/DVD OUT
EURO AV2
DECODER
EURO AV1
AUDIO/VIDEO
COMPONENT
Y
COAXIAL
RGB
2 channel
analog
stereo
or
Pro
Dolby
Logic
II/Pro
Logic
connection.
DVD exclusive out
Both DVD and VCR out
Digital
COAXIAL
DIGITAL INPUT
multi-channel connection
L
exclusive out
connecttion)
R
AUDIO INPUT
Amplifier (Receiver)
10
(DVD
OPTICAL
DIGITAL INPUT
If the audio format of the
the
capabilities of
produce a strong,
--
To
see
Screen
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the On-
Display,
press AUDIO.
Before
Tuning
Operation
in
a
-
VCR part
video channel
on
your TV
Notes
The output frequency of this video recorder
(VCR) is set at UHF channel 36. If channel 36
is already used by another TV station, or if the
picture is distorted, you can change the
transmitter channel of your VCR. Stages 5
8
will show you how to change the output
frequency of your VCR.
~
Your TV receives signals from the video
recorder (VCR) like another TV station. You
have to select a channel number on your TV
and tune it in so that you may watch video
tapes. If you have used a SCART cable then
your TV should already have a dedicated video
channel built into it, usually called AV.
1
Make sure that you have correctly installed your
VCR as described earlier in this book.
Press POWER to turn on your VCR.
Turn on your TV.
2
Insert a pre-recorded video tape into your VCR
and press PLAY on the remote control.
Select a TV channel number on which you wish to
watch video's.
Don't worry if you don't have a video-tape to play at
this stage! If you switch your VCR on and continue
stages 3 4, instead of seeing video playback tune
your TV until you see a bright blue screen.
4
Press PROG. 3 or 4 to select another video channel.
You may select any channel number between 22
and 68.
You can also set it to "OFF" if there is any
interference when your TV is connected to the
VCR with a SCART lead.
Select
a
TV channel number
8 watch video's.
which you wish to
on
I on the front of your VCR when you have
Press
finished.
Tune this channel so that a bright blue screen
appears.
Store this channel
on
your TV.
Notes
Make sure that you have correctly installed your
VCR and successfully tuned in a dedicated video
channel on your TV. If you do not tune in a
dedicated video channel on your TV you will be
unable to view and record video tapes!
Using your VCR very first
~
3
7
Tune this channel until the video picture is sharp
and the sound is clear.
If you have used a SCART cable you will not have
to tune your TV, simply select the AV channel. The
AV channel is already pre-tuned for optimum video
playback on your TV.
Following picture
will
display
on
time
the TV
screen
when you have just connected your video recorder
for the very first time.
TV stations,
To make
tuning
3 to 4
shown "ACMS"
as
A
BD
CH
please follow stages
(see p.13).
DK
EFI
NNLPSSFALTRI
Pr-12
ACMS
OKi
Store this channel on your TV.
You will need to look at the TV instruction book if
you do not know how to do this.
8 if you cannot obtain
described in stages 1
4.
Select a TV channel number on which you wish to
watch video's.
Make sure that your VCR is in standby pressing
POWER on the remote control (only the clock will
out
Only carry
stages
5 clear
video playback
5
~
as
be
6
~
displayed).
Press PROG. 3 or 4 on the front of your VCR for
than 4 seconds.
RF36 will appear in the display window.
The following picture will be displayed on the TV
more
screen.
RF
PSET
R
CANAL
36
i
11
PREATION
Before
Setting
Operation
the clock
VCR part
-
To set the colour system
Manually
The clock in your VCR controls time and date
settings for your VCR.
1
automatically during ACMS
Channel
(Automatic
Memory System) when
The clock is set
VCR detects
a
channel that broadcasts
If the broadcast
signal.
will not be set and will
a
your
Teletext
signal is weak the clock
require setting manually.
Press i.
2
The main
3
Press 1
or
Press 3
or 4
menu
will appear
on
the TV
screen.
2 to select the SYSTEM and press OK.
Press i.
1
Press 1
or
4 system used.
2 to select TIME DATE.
Press OK.
The auto
D
or
mode
adjust
can
be set to "OFF"
to select
according
to the COLOUR
by pressing
E if you want to set the time manually.
Press OK.
REC
fOSD
ON
OFF
AUTO
ADJUST
:
AUTO
PAL
MESECAM
4:3
DER
SYSTEM
AB
C
OSD
VCR
Dr.
OPR
SYSTEM
i
ON
--
5
12
TIME
DATE
OK i
HHMMDDMMYY
--
:.
-
-
--
--
--
---
.
12
TIME
DATE
2
i
Use the numbered buttons
to alter the
the remote control
on
HOURS, MINUTES, DAY, MONTH and
YEAR.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The
day
of the week will appear
automatically
when
you enter the year.
HHMMDDMMYY
8
:.
0010103WED
.
12
TIME
DATE
3
4
If you make
a
correct details.
Press i.
12
mistake press 1
i
or
2 and enter the
Press i to
remove
the
menus
from the TV
screen.
Before
How to
Operation
VCR part
-
the main
using
Tuning
menu
This VCR
menus
The
can easily be programmed by using
displayed on screen.
menus are
the
controlled from the Remote
Control Handset.
1
2
by pressing
will appear
menu
on
the TV
screen.
is weak your VCR may
signal
turn to the MANUAL TUNING section
on
page 14.
1
Press i button.
The main
If the TV broadcast
Automatically
not detect the necessary information and will be
and to store them correctly. To overcome this problem
please
Switch on your TV set and video recorder
the POWER button.
in TV Stations
2
Press POWER to turn
your VCR.
on
Press i button.
The main
Press 1
will appear on the TV
2 to select the ACMS.
menu
or
screen.
Press OK.
12
REC
PSET
R
fOSD
Pr-12
ACMS
+
ON
OFF
16:9
4:3
SYS-
TIME
DATE
TEM
AB
C
OSD
VCR
Dr.
-
DECODER
REC
OKi
OPR
12
Pr-12
PSET
R
REC
REC
ACMS
+
fOSD
Timer
recording setting (see p. 22).
PR SET Manual tuning setting (see p. 14).
ACMS ACMS (Automatic Channel Memory
System) (see p. 13).
TIME DATE Date & clock setting (see p. 12).
SYSTEM To set the Colour TV System
(see p. 12).
ABC OSD To change the language setting for
-
ON
OFF
16:9
4:3
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
Pr-12
ACMS
-
DECODER
OPR
OKi
-
-
-
O
O
-
A
BD
CH
NN L
-
DK
EFI
PSS F
OTHERS
Pr-12
OKi
ACMS
OSD.
You
O
O
O
select the
language among
English, Deutsch, Francais, Italiano,
Espanol, Dutch and Portuguese.
Dr. To check a problem with your VCR
(see p. 30).
F.OSD ON/OFF To display the operational
mode of your VCR (see p. 30).
can
-
-
16:9/4:3
-
To select the aspect ratio of your TV
(see p.31).
O
O
DECODER
OPR
-
To
use a
pay-TV
decoder
(or Satellite)
or
2 to select COUNTRY.
D:Germany, DK:Denmark, E:Spain, F:France,
I:Italy, N:Norway, NL:Nertherlands, P:Portugal,
S:Sweden, SF:Finland, Others)
Press OK again to start the automatic tuning
process.
The VCR's clock will be set
automatically when
tuning has finished. If the clock is wrong
please see "Setting the clock manually" on page 12.
automatic
with your VCR (see p. 31).
To improve the playback picture
(see
3
-
Press 1
3 (A:Austria, B:Belgium, CH:Switzerland,
p.
20).
Press 1 and 2 to select the desired
Press OK and press 3
or 4
01
C02
00
RAI1
02
C03
00
RAI2
03
C04
00
RAI3
menu.
to select.
S
E
Pr-12
i
ACMS
4
Press "i" to return to
a
TV
picture.
The TV STATION TABLE will appear when
4 is complete.
Press i to
save
your
settings.
01
C02
00
02
C03
00
03
C04
00
RAI3
04
C05
00
TVE
05
C06
00
06
C07
00
CNN
07
C08
00
TMC
08
C09
00
PSET
R
tuning
RAI1
RAI2
HRT
YLE1
MOVE
:
DELETE
:
,
OKi
13
PREATION
Before
Tuning
In certain
Operation
VCR part
-
in TV Stations
areas
Press 2 to select STATION
Manually
of the country broadcast
5 your
signals
that you may
so
Press OK.
may be too weak for your VCR's automatic tuning
process to find or assign TV stations correctly.
The TV station
list will appear.
name
RAI1
RAI2
You must tune in these weaker broadcast stations
manually
1
name
TV station.
RAI3
TVE
in order for your VCR to store them.
PR
CH
MFT
HRT
09
C10
00
CNN
TMC
YLE1
Press i.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
screen.
Press OK.
PSET
R
6
Press D
E to select a station name from the list.
or
Press OK to select it.
If your station
to
OK, but go
12
PSET
R
REC
fOSD
ON
OFF
Pr-12
ACMS
+
16:9
4:3
SYS-
TIME
DATE
TEM
AB
C
VCR
OSD
Dr.
name
isn't
stage
7.
the list do not press
on
PSET
R
-
DECODER
OK i
RAI1
OKi
OPR
RAI2
RAI3
TVE
PR
CH
MFT
HRT
09
C10
00
CNN
TMC
YLE1
PR
01
CH
MFT
STATION
C02
00
PR-01
CHANNEL/CABLE
PSET
R
:
AV
PSET
R
7
i
You
than
OK i
change a TV station name manually
using the "standard" names.
can
rather
Press G.
2
Press i.
Press 3
The station table will appear.
Press 3 or 4 to select the programme number that
new
you want to tune
(for example,
PR
Press 1
09).
or 4
station
or
to select letters and numbers for the
name.
2 to
move
back and forth between
characters.
Press OK.
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
3
MOVE
:
DELETE
:
PR-07
PR
PR-08
C09
(Standard stations)
or
S
(Cable stations):
C69, S01
-
Enter the channel number of station that you want
required
8
station.
new
09
13
14
09
C--
MFT
STATION
--
----
15
16
PSET
R
CHANNEL/CABLE
:
P
SET
R
will
AV
i
stop when it locates
2 to select MFT.
Press 3
or 4
to
adjust.
PR
CH
MFT
09
C10
00
STATION
CHANNEL/CABLE
PSET
R
14
:
AV
i
a
stations.
placement.
been tuned into your VCR.
tune other stations
-
12
CH
now
manually
11
PR
OK i
TV station has
If you wish to
stages 1 8.
10
4 Searching
Press
RAI2
Press i, confirm the station
Press i again.
Your
S41.
to tune with the numbered buttons or use 3 or 4
to find the
STATION
00
PSET
R
Press AV to select C
-
MFT
OKi
,
Press OK.
C02
CH
C10
C10
RAI2
00
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
--
--
-----
-----
MOVE
:
DELETE
:
,
OKi
repeat
Before
Operation
Changing
-
VCR part
the order of TV Stations
Deleting
After tuning TV stations into your VCR you may
wish to change the order in which they are stored
without having to retune them against! The instructions
given on this page will show you how you can simply
move them into your desired order.
1
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
TV Stations
After tuning TV stations into your VCR you may
wish to delete a station.
The instructions given on this page will show you
how easily delete any unwanted TV stations.
1
screen.
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
AB
C
12
PSET
R
REC
12
PSET
R
REC
Pr-12
ACMS
+
fOSD
ON
OFF
16:9
4:3
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
fOSD
PSET
R
-
DECODER
16:9
4:3
TIME
DATE
SYS-
VCR
Dr.
OSD
TEM
PSET
R
-
DECODER
OKi
OPR
OKi
OPR
PR
PR
01
Pr-12
ACMS
+
ON
OFF
CH
MFT
STATION
C02
00
PR-01
01
CH
MFT
STATION
C02
00
PR-01
CHANNEL/CABLE
CHANNEL/CABLE
AV
:
PSET
R
2
Press i.
Press 3
Press i.
Press 3
or 4 to select the programme number
you want to delete. (for example, PR 03)
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
C05
00
PR-04
01
C02
00
PR-01
02
C03
00
PR-02
05
C06
00
PR-05
03
C04
00
PR-03
06
C07
00
PR-06
04
C05
00
PR-04
07
C08
00
05
C06
00
PR-05
08
C09
00
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PSET
R
:
DELETE
:
PR-08
:
DELETE
:
OKi
,
OKi
,
C02
00
02
C03
00
PR-01
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
00
PR-05
06
C06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
3
Press 1.
After a short while, the selected station will be
deleted.
OKi
01
C02
00
02
C03
00
PR-02
03
C05
C06
00
PR-04
00
PR-05
C04
00
PR-03
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
C02
00
PR-01
02
C03
00
03
00
04
C05
C06
00
PR-02
PR-03
PR-04
05
06
C04
C07
00
00
PR-05
PR-06
07
C08
00
PR-07
08
C09
00
DELETE
P SET
R
4
PR-01
05
01
PR-08
MOVE
to select the programme number
you want to move to (for example, PR 05).
or 4
04
PR-07
MOVE
PR-08
MOVE
PSET
R
4
i
04
PSET
R
3
2
to select the programme number
you want to move (for example, PR 03).
Press 2.
Press 3
AV
:
PSET
R
i
or 4
01
PREATION
screen.
,
OKi
Press i to remove the menus from the TV screen.
If you wish to delete other TV stations repeat
stages
1
-
3.
OKi
Press OK.
The selected programme will be moved to the new
programme number.
If you wish to move other TV stations repeat stages 1 4.
Press i to remove the menus from the TV screen.
:
:
01
C02
00
PR-01
02
C03
C06
00
03
00
PR-02
PR-03
04
C04
00
PR-04
05
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
08
MOVE:
PSET
R
DELETE
:
,
OKi
-
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
04
00
PR-02
PR-03
PR-04
05
C04
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
PR-07
PR-08
MOVE
:
DELETE
:
,
How to
selecting
Stored TV stations:
Stored TV stations can be selected in either of two ways.
Press PROG. 3 or 4 to select different stations that are
tuned into your VCR.
You may also directly select stations using the
numbered buttons on the remote control.
OKi
15
Before
General
This manual
Operation
-
DVD
part
Temporary
Explanation
the basic instructions for
gives
operating
require specific operation or allow
only limited operation during playback. When this
occurs, the symbol
appears on the TV screen,
that
the
indicating
operation is not permitted by this unit
or
is not available
On-Screen
The
TV
general playback
screen.
1
2
3
Press 3
or
can
be
highlighted.
the
change
The number buttons
(e.g.,
Repeat A-B
title
can
setting
of
For
Video CDs
(non-PBC
only)
Video CDs
only)
Repeat Off
play
from this
prohibited
or
point
not available
provide
all of the below On-
If no button is pressed
Display disappears.
for 10 seconds, the On-Screen
setting
functions,
some
press SELECT/ENTER to execute the
Some discs may not
Screen Display.
item.
an
be also be used for
number).
(non-PBC
Notes
during playback.
Press 1
numbers
AB
Action
4 to select an item.
2 to
Repeat
All Tracks
Resume
The selected item will be
or
ALL
displayed on the
changed on the menu.
display operation
Press DISPLAY
Track
status can be
Some items
On-screen
Repeat
OFF
Display
Title
Repeat Chapter
CHAPT
TRACK
the disc.
on
Repeat
TITLE
this unit. Some DVDs
Feedback Field Icons
setting.
DVD
Items
Function (Press 3/4 to select desired item)
Shows the current title number and total number of
Title Number
1/3
Chapter
1 /12
Time search
0:20:09
Audio
language
Digital Audio
Output mode
1 ENG
and
D
5.1 CH
OFF
1/1
chapters,
and
Shows the
to the desired
chapter number.
elapsed playing time, and
point by the elapsed time directly.
searches the
Shows the current audio soundtrack
encoding method, and
changes the setting.
channel
language,
number, and
language,
and
and
1/2,or
Numbers
,
SELECT/ENTER
Numbers
,
SELECT/ENTER
1/2,or
AUDIO
1/2,or
changes the setting.
angles,
1/2,or
Numbers, SELECT/ENTER
number and total number of
chapter
skips
SUBTITLE
angle number and total
changes the angle number.
Shows the current sound
NORM.
mode,
number of
and
changes the setting.
1/2,or
ANGLE
1/2
VCD1.1
Items
Track Number
1/4
Time
Audio Channel
16
to the desired title number.
Shows the current subtitles
ABC
Sound
Sound
skips
Shows the current
Angle
VCD2.0
and
Shows the current
Number
Subtitle language
titles,
Selection Method
0:20:09
Function (Press 3/4 to select desired item)
Selection Method
Shows the current track
1/2,or
Numeric, SELECT/ENTER
and PBC On
Shows the
mode,
and
number, total number of tracks
skip to the desired track number.
elapsed playing
Shows the audio
STER.
NORM.
channel,
changes the audio channel.
Shows the current sound
changes the setting.
time
(Display only)
and
--
1/2,or
AUDIO
mode,
and
1/2
Before
Initial
You
-
DVD
General
Settings
part
Menu
Settings
set your own Personal Preferences on this unit.
can
Initial
1
Operation (Continued)
Select
you
Language
a
see
Operation
Press SETUP.
The setup
menu
for the setup
language
appears.
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
Country
TV
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
PREATION
Portuguese
Language
Audio
Digital
Output
Spanish
Code
Italian
Aspect
Menu
menu
Others
Country
TV
This is the
Italian
Code
Aspect
Menu
Disc Audio
menu.
when you press SETUP.
Chinese
Language
Polish
Digital
Audio
Output
Hungarian
Picture
Other-------Others
TV
Press 3/4 to select the desired item.
2 The
While the desired item is
nected.
then
to
to
Some items
Press
5 setup
require
additional steps.
SETUP, RETURN
or
DVD
4:3 Letterbox: Select when a standard 4:3 TV is con-
screen will show the current setting for the
selected item, as well as alternate setting(s).
press 2,
3 3/4 select the desired selected,
setting.
Press SELECT/ENTER
confirm your
4 selection.
Aspect
PLAY to exit the
Displays
theatrical
images
picture.
above and below the
with
masking
bars
4:3 Panscan: Select when a conventional TV set is
connected. The video material formatted in the Pan &
Scan
style
picture are
is
played
off).
back in that
style (Both
sides of the
cut
16:9 Wide: Select when a 16:9 wide TV is connected.
menu.
Language
Disc Audio
4:3 Letterbox
Disc Subtitle
4:3 Panscan
Disc Menu
16:9 Wide
Rating
Disc
Select
Language
language
a
DVD
Country
TV
for the disc's Menu, Audio, and
Subtitle.
Language
Digital
original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 35. If you enter the wrong language
Original
:
Code
Aspect
Menu
Audio
Output
The
Others
code, press CLEAR.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Code
Aspect
Menu
Spanish
Italian
Language
Chinese
Polish
Digital
Audio
Output
Hungarian
Other--------
Others
17
Before
Operation (Continued)
-
DVD
Sound
Digital
Others
Audio
Output
Each DVD disc has
The DRC, Vocal, PBC and Auto
of audio output
variety
options.
player's Digital Audio Output according to the
Set the
part
a
type of audio system you
use.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
Press 3/4 to select the desired item and press
setting of the selected item is
changed
between On and Off.
DTS decoder,
MPEG decoder.
or
a
PCM: select when connected to
Auto
on
the
On
Play
Off
Rating
Dolby Digital
a
On
PBC
Disc Menu
2-channel
Country
TV
Code
Aspect
Menu
Language
decoder
Digital
digital
Audio
Output
Others
This unit outputs sounds in the PCM
2ch format when you play a DVD video disc recorded
stereo
On
Vocal
Disc Subtitle
Dolby Digital decoder).
with
DRC
Disc Audio
Stream/PCM: Select "Stream/PCM" if you connected
this unit's DIGITAL OUT jack to an amplifier or other
equipment
be
can
SELECT/ENTER. The
if you connected this unit's DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equipment with a
Play settings
changed.
amplifier.
Dolby Digital, MPEG1,
MPEG2
or
recording
sys-
Dynamic Range
Control
(DRC)
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
tem.
Disc Audio
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
PCM
/PCM
Rating
Country
TV
Code
Aspect
Menu
Digital
Audio
Sample Freq.
48 KHz
Language
96KHz
Output
thanks to
possible,
audio
digital
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
quietest ones). Then, you may
losing clarity
at a lower volume without
listen to
a
movie
of sound. Set
DRC to On for this effect.
Others
Vocal
Sample Frequency
Set Vocal to On
To
only
DVD is
The karaoke channels
Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
change
the
playing.
mix into
a
when
a
multi-channel karaoke
on
the disc will
normal stereo sound.
PBC
Set
Playback Control (PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On or Off.
played according to the PBC.
played the same way as Audio
CDs.
Auto
You
Play
can
ically
set up the DVD
starts
If Auto
Play
search
a
play
DVD
playing
Player
so a
DVD disc automat-
whenever the DVD is inserted.
mode is set to On, this DVD player will
playback time is long most and then
title that
back the title
automatically.
On: Auto
Off:
Play function is activated.
Auto Play function is not activated.
Note
The Auto
18
Play
function may not work for
some
DVDs.
Before
Operation (Continued)
-
DVD
Parental Control
Rating
Code
Country
DVD
Enter the code of
DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain
part
the disc. These
scenes on
scenes are
country-dependent.
whose standards
country/area
were
IT
Disc Subtitle
are
PREATION
Code Set
Disc Audio
rated
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
a
used to rate the DVD video disc, referring to the list
(See "Country Code List", page 36.).
Disc Menu
Rating
Country
The Parental Control feature allows
TV
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Code
Aspect
Menu
Language
Digital
Audio
Output
Others
Disc Audio
8
Disc Subtitle
7
Disc Menu
6
Rating
TV
Code
4
Aspect
Menu
1
Audio
Output
Unlock
Change
Others
1
Select
2
While
3
When you have not entered a password yet.
Enter a 4-digit password using the numbered but-
3
"Rating"
and
on
the
Setup
menu
using
the
buttons.
4
"Rating"
tons to create a
is
the
selected,
press 2.
2
3
4
5
6
While
using
the 3/4 buttons
on
menu.
Code is
Country
Follow
3 of
step
selected, press 2.
"Rating"
Select the first character
Shift the
cursor
on
left.
using
the 3/4 buttons.
1/2 buttons and select
using
the second character
using
3/4 buttons.
Press SELECT/ENTER to confirm your country
selection, then press SETUP to exit the
code
menu.
personal 4-digit security password,
then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify.
When you have already entered a password;
the code is
Enter
below
a
Code
Country
setup
3
2
Language
Digital
Select
1
5
Country
4-digit password using the numbered butpersonal 4-digit security pass-
Note
Confirmation of the
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
).
tons to confirm the
4
word, then press SELECT/ENTER.
Changing
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
1
Follow
2
Enter the old code, then press SELECT/ENTER.
Select Change using the 3/4 buttons then press
Select
a
rating from 1
(1) has the
tons. One
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
Ratings
played. Higher
unless
an
rated
alternative
scenes
scene
is available
The alternative must have the
lower
one.
If
no
will not be
same
played
on
rating
the disc.
or a
suitable alternative is found,
play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
Press SELECT/ENTER to confirm your
5 selection,
then press SETUP to exit the
code
1-2 as shown above to the left
(Rating).
Enter the
new
4-digit code,
then press
SELECT/ENTER.
5
exactly the same code a second
fy by pressing SELECT/ENTER.
6
Press SETUP to exit the
Enter
If you
If you
forget
forget
your
your
time and veri-
menu.
4-digit
password,
code
to clear the current pass-
word, follow the procedure below.
1
Press SETUP to
2
Use the Number buttons to enter the
display
the setup
menu.
6-digit
number
"210499".
rating
menu.
Steps
4-digit
SELECT/ENTER.
4
1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be
3
least
has the most
Eight (8)
using the 3/4 butplayback restrictions.
playback restrictions.
to 8
the
The
3
4-digit password is cleared.
Enter
a new
code
as
shown above to the left
(Rating).
19
with
Operation
Playing
You will
a
only
tape
playback, Shuttle :
or still picture press F or G.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
Slow motion
tape
5 During playing back
be able to load and
eject video
cassettes
when your VCR is plugged into the mains.
Your VCR may also playback recordings from NTSC
To switch off the slow motion and shuttle, press the
desired function.
tapes (on PAL TV).
better
Getting
a
When
cassette is inserted and
a
picture
During
playback started, the
function works to get the best
automatic
tracking
possible picture automatically. If the quality of the
recording is poor, repeatedly press 3 or 4 on the
remote control to manually adjust the tracking until
any distortions have been removed. Press numbered
0 on the remote control to switch automatic tracking
back
appear
tape.
Make
VCR
that you have correctly connected your
described earlier in this book.
sure
as
your TV.
Press POWER to turn
Turn
can
or
in the
seen
picture,
reduce
playback.
Press EJECT.
If the end of the
tape is reached, your VCR will stop
the tape.
playback automatically, rewind, stop, eject
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
normal
on
be
E.
Press STOP to end
6
CM
1
If distortions
them with D
again.
on
slow motion and shuttle, the noise bars may
on the picture according to the status of
playback.
your VCR.
Insert the video cassette into your VCR.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
The video cassette should have the window side
material).
Repeatedly
facing
up and the
on
arrow
facing
away from you.
press CM SKIP to
skip:
1 Press 30 seconds
2 Press 60 seconds
2
Press PLAY to start
playing
your tape.
video cassette which has had its
3 Press 90 seconds
If you load a
record protection tab removed, playback of the
cassette will start automatically.
4 Press 120 seconds
5 Press 150 seconds
6 Press 180 seconds
AUTO TRACKING
Your VCR will
give
3
the best
automatically adjust
picture quality.
Press PAUSE/STEP to still
Press PAUSE/STEP
the
tracking
to
picture.
repeatedly to advance
the
be
paused for up to 5 minutes. After 5
minutes your VCR will stop the tape to prevent
damaging the tape or your VCR
.
picture quality
pressing 3 or 4.
4
can
be
Press PLAY to continue
improved slightly by
playing
Picture
Response)
automatically improves playback picture
quality by adjusting your VCR to the condition of the
slowed down at about 1/19 times the normal
Still
(Optimum
This feature
a
tape frame by frame.
If you hold down FORWARD, the picture will be
playback.
Tapes can
OPR
tape.
1
Press i.
2
Press 1
3
Press OK.
or
2 to select OPR.
your tape.
Picture search:
back press either FORWARD or
BACKWARD to this will enable you to rapidly wind
During playing
the tape
you
(7
are on
times normal
playback)
and
see
4
rewinding press and hold
FORWARD or BACKWARD the picture will be
played back at 7 times normal playback speed.
20
ON
OFF
16:9
4:3
12
12
MS
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
OPR
-
DECODER
i
OPR
where
the tape.
Logic search:
During fast forwarding
OFF
SOFT
SHARP
R
f
Press
3
or 4
repeatedly
Please note you may
or
playing
5
to select:
OFF, SOFT
SHARP.
a
only
tape.
Press i return to
screen.
set OPR when
or
Operation
with
Instant Timer
tape
Press LP if you wish to record in
Recording (ITR)
Your VCR allows you to make
variety of simple methods:
5 Standard Play.
recordings using
SP will
a
Recording (ITR) start recording
for
a set period of time or until the
immediately
Your VCR
incorporates Long Play (LP)
time
record up to 180 minutes using Standard Play (SP);
using LP you will be able to record up to 360 minutes.
Please note there will be
1
quality
Make
VCR
when
a
using
slight
loss in
and
picture
LP.
that you have correctly connected your
described earlier in this book.
sure
as
Press POWER to turn
Insert
2 VCR.
on
your VCR.
video cassette with
a
as
SP.
Press REC/ITR to start
6 RECORD
which
enables you to record up to twice the amount of
time on a video cassette. For example an E-180 will
sound
produce improved picture and sound quality,
provide twice as much recording
recording.
will appear on the TV screen.
Press REC/ITR several times. Each successive
out.
runs
or
however LP will
Instant Timer
video cassette
Long Play
protection
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
7
Press PAUSE/STEP to avoid
recording
unwanted
scenes.
Press PAUSE/STEP to continue
recording.
paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5
minutes your VCR will stop recording to prevent
damaging the tape or your VCR.
Tapes
can
be
Press STOP twice within 5 seconds to end
8 recording.
Press EJECT.
tab into your
EJECT will appear
on
the TV
screen
for
a
few
seconds.
The video cassette should have the window side
up and the
facing
arrow
facing
away from you.
Notes
If you do not wish to record
3
Press
3
or 4
to select the programme number
you wish to record.
You may also directly select programme number
using the numbered buttons on the remote control.
If
wish to record
from the SCART
you
directly
4 RCA
sockets repeatedly press
you wish to record from is
AV 1 for
recording
on
the
rear
on
the
rear
or
AV until the socket
displayed.
from EURO AV1 SCART socket
of your unit.
AV 2 for recording from EURO AV2 SCART socket
(Left
&
with self adhesive
tape.
Remember you can
watching another by
record
programme while
starting your instant recording,
press TV/VCR to appear TV indicator in the display
window and then selecting a different channel on your
one
TV.
of your unit.
recording from VIDEO IN
Right) sockets on the front
AV 3 for
on a tape (this can happen
quite easily by accident!) remove the protection tab on
the back edge of the video cassette.
It is possible to record on a video cassette with the
record protection tab removed by covering the hole
and AUDIO IN
of your unit.
21
OPERATION
with
Operation
tape
recording using On Screen
Display
Timer
6
You may set up to seven timer record events within
one month of the current date.
Press the numbered buttons to enter the recording start
and end times of the programme that you wish to record.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
You may also select the the start and end times by
pressing
3
PR
Note
PR-01
Before setting the timer make sure that you have set
the VCR clock correctly and you know which stations
you have tuned TV stations on your VCR.
1
2
3
Insert a
protection tab into your
VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
7
Press i.
Press 1 or 2 to select REC.
Press OK.
Press OK to start setting the timer record event.
If all timer record events are full press 3 or 4 to
select the event that you wish to remove and
19002000
::
SP
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
Press 3 or 4 to switch VPS/PDC on or off.
Press 2 to select the recording speed.
Press 3 or 4 to select the desired tape speed (SP, IP, or LP).
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program. IP mode is not
selected when VPS/PDC is ON.
PR
PR
--
DATE
--
PR-01
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
-~
-~
--
-~
--
-~
--
-~
SP
--
8
-
-
PR
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
i
Press the numbered buttons to enter the date of
the programme.
If you press OK before entering the date you may
select one of the following automated recording
features. Press 1 or 2 to select, then press OK to
confirm.
DLY To record every day (except Saturday and
Sunday) at the same time.
SU
SA To record at the same time every week.
~
PR
DATE
TIME
--
PR-0116---
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
DLYSUMOTUWETHFRSA
--
--
--
::
--
-~
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
i
Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1
9, press 0 first, then the
channel number; for example Stations 3 03. You
may also select Channels by pressing 3 or 4.
Once selected press 2.
If you wish to record from AUDIO IN (L/R) and
VIDEO IN on the front or from the EURO SCART
sockets on the back of your unit, press AV to select
for correct display (AV1, AV2 or AV3).
PR-01
FR3
SP
::
--
SP
--
::
19002000
::
--
SP
--
::
TIME
16
SP
--
::
DATE
--
SP
--
::
--
SP
--
::
--
SP
--
i
--
OK i
9
Check that the timer event details
Press i twice.
are
correct.
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your VCR Standby.
will appear in the display window while your
VCR waits to make the recording. To watch a DVD
during timer recording standby mode, press
POWER and DVD/VCR to switch to DVD mode.
Press POWER twice within 5 seconds to end
recording.
Notes
If at a later date you wish to delete or change any of the
settings in timer event memory you may do so without
having to enter all the timer event information again.
Simply display the timer event screen. Press 3 or 4 to
select the event that you wish to delete or change.
Press 1 to delete the event...or
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3 or
4 to enter the correct information.
If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme
will always be given priority.
Example:
Programme 1 is programmed to start at 16:00 and end at 17:00.
Programme 2 is programmed to start at 16:30 and end at 17:30.
(In this case, Programme 1 will be recorded in its entirety, but
only the last 30 minutes of Programme 2 will be recorded.)
Video Programme System (VPS)
The Video Programme System (VPS) ensures that the TV programmes that you have programmed for timer recording will be
recorded exactly from their beginning to end, even if the actual broadcasting time differs from the scheduled time due to delayed start, or if
the programme is extended beyond its scheduled time. Also, if a programme is interrupted, for example, if a news flash is inserted, the
recording will also be interrupted automatically and resumed when the
programme continues.
The VPS signal is broadcast by the TV station and this controls the
timer in the video recorder.
VPS should be set ON for all timer recordings from TV stations broadcasting these signals. It should be set OFF for all timer recordings from
TV stations that are not broadcasting these signals.
The similar system PDC, which is used in the time being in the
Netherlands, can also be used with your new video recorder.
***
22
TIME
16
i
Press 1 to delete the event.
5
DATE
--
video cassette with
replace.
4
or 4.
Operation
Playing
with DVD and Video CD
DVD and Video CD
a
Playback Setup
Turn
on
DVD
VCD2.0
the TV and select the video
nected to the DVD
General Features
Note
VCD1.1
input
source con-
player.
features may also be available
Audio system: Turn on the audio system
and select the input source connected to the
DVD
1
Moving
player.
Press OPEN/CLOSE to open the disc
Unless stated otherwise, all operations
described use the remote control. Some
2 facing
tray, with the label
a
Press OPEN/CLOSE to close the
3 READING
starts
appears
automatically.
The
a menu screen
is
or
may be displayed first after
Video CD which contains a menu.
loading
a
DVD
Use the 1 2
you want to
3
4
buttons to select the
title/chapter
view, then press SELECT/ENTER to start
playback.
Press TITLE
or
DISC MENU to return to the
title, you
to
can move
num-
a
title
on a
more
1/3
1 /12
disc has
than
as
Press .
or
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
>
briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
menu
Note
For
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
setting
the
operating procedures
depending on the disc.
menu
two-digit numbers, press
(0-9)in rapid succession.
Slow Motion
menu screen.
and the exact
may differ
Follow the instructions on the each
using
one
to another CHAPTER/TRACK
chapter/track
screen.
Menu
than
more
follows:
as
VCD1.1
disc has
displayed
menu screen
DVD
disc has
DVD
When
appear
instead.
If
a
another title
Moving
tray.
might
DVD
Press DISPLAY, then press the appropriate
(0-9) to select a title number.
the TV screen, and playback
If playback does not start,
menu
menu.
bered button
sure
on
press PLAY.
In some cases, the disc
to another TITLE
Setup
1/3
up.
double-sided DVD is inserted, make
the side you want to play is facing down.
When
the
tray.
When
Load your chosen disc in the
on
for
menu screen.
You also may set PBC to Off under setup. See page
18.
The
player
VCD2.0
DVD
1 Press . or >
the numbered buttons
during
VCD1.1
pause.
will enter SLOW mode.
2 Use the . or > to select the
required speed:
1/16, t 1/8, t 1/4 or t 1/2 (backward),
T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
or
t
T 1/16,
Notes
--
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
--
--
--
"Parental Control",
DVDs may have a
(see
page 19).
region code.
Your player will not play discs that have a region code
different from your player. The region code for this
player is 2 (two).
To watch a DVD during timer recording standby
Note
Slow motion
playback
in
reverse
is not
applicable
for
Video CD.
on
mode, press POWER and DVD/VCR to switch to
DVD mode.
23
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
Frame-by-Frame Playback
VCD1.1
player
will
picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote control.
VCD2.0
DVD
the TV
screen.
a
Repeat
All icon appears
the TV
on
screen.
Repeat mode, press REPEAT a third time.
Repeat Off icon appears on the TV screen.
3 To exit
The
Note
VCD1.1
On
1 Press and hold . or > for about two seconds
a
setup
during playback.
The player will now go into SEARCH mode.
2 Press and hold . or > repeatedly to select the
required speed: mX2, mX4, mX16, mX100
(backward) or MX2, MX4, MX16, MX100
(forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
3 To exit SEARCH
press REPEAT.
playing,
on
repeat the disc currently playing, press REPEAT
The
2 You can advance the
Search
Track/All/Off
Repeat
second time.
during playback.
go into PAUSE mode.
now
-
1 To repeat the track currently
The Repeat Track icon appears
2 To
1 Press PAUSE/STEP
The
Video CDs
(continued)
mode, press PLAY.
Video CD with PBC, you must set PBC to Off on the
menu to use the Repeat function. See page 18.
Repeat
A-B
A*
AB
To repeat
a
VCD2.0
DVD
OFF
sequence in
a
title:
1 Press A-B at your chosen
A* appears briefly on the TV
2 Press A-B
briefly
starting point.
screen.
at your chosen end point.
the TV screen, and the repeat sequence
again
A B appears
VCD1.1
on
begins.
Random
VCD1.1
Karaoke DVD
3 To cancel the sequence, press A-B.
1 Press RANDOM
The unit
during playback or in stop mode.
automatically begins Random Playback and
"RANDOM" appears
2 To return to normal
the TV
screen.
on
Time Search
1 Press DISPLAY
play
>
during Random playback, the unit
(track) and resumes Random play-
selects another title
appears
only
works with DVD Karaoke discs and
video CD without PBC.
OnaVideoCDwithPBC,youmustsetPBCtoOffon
the setup
page 18.
Repeat
menu
to use the Random function. See
VCD2.0
DVD
TITLE
1 To
repeat the
REPEAT.
TRACK
ALL
3 Within 10
the
elapsed playing time of the
on-screen
display.
seconds,
use
the number buttons to enter
start time. Enter
onds from left to
right
hours, minutes, and
sec-
in the box.
seconds, press SELECT/ENTER to confirm
an
-
Repeat Chapter/Title/Off
currently playing chapter,
on
the TV
3D Surround
press
DVD
VCD2.0
VCD1.1
3D SUR
screen.
a
This unit
can
produce
a
3D Surround effect, which
playback from two
simulates multi-channel audio
Repeat Title icon appears
Repeat
starts from the selected time on the disc. If you enter
playback will continue from the current point.
invalid time,
on
the TV
screen.
mode, press REPEAT
Repeat Off icon appears
on
the TV
a
third time.
screen.
conventional stereo
five
more
speakers, instead of the
speakers normally required to listen to
multi-
channel audio from
1 Press DISPLAY
a
or
home theater system.
during playback.
2 Press 3/4 to select "NORM." or "3D SUR".
3 Press 1/2
selected.
24
dis-
seconds, press 3/4 to select the Time
required
Playback
OFF
repeat the title currently playing, press REPEAT
The
on-screen
screen.
The "-:--:--" appears in the Time Search box.
4 Within 10
second time.
The
The
at
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
VCD1.1
Repeat Chapter icon appears
3 To exit
the
playing
current disc.
NORM.
2 To
-:--:--
the start time.
DVD Video Discs
The
during playback.
Search icon in the
Note
CHAPT
on
The Time Search box shows the
2 Within 10
back.
This function
0:20:09
DVD
The Time Search function allows you to start
any chosen time on the disc.
press RANDOM until
the TV screen.
playback,
"NORMAL" appears
Tips
By pressing
on
repeatedly
until the desired sound is
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
(continued)
VCD1.1
Checking
during playback
or
still
playback
to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the
increases up to six times.
2 Use the 1 2
zoomed
3 4
buttons to
picture.
3 Press CLEAR to resume normal
the
the
through
playback
or
the contents of DVD Video
DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select
option. Or, use the 1/2/3/4 buttons to highlight your
selection, then press SELECT/ENTER.
magnification level
move
return to
paused image.
1 Press TITLE.
If the current title has
screen.
zoom
The
zoom
function may not work for
function may not work on
some
DVDs.
nine
can
and subtitle
multi-angle
1
DVD
VCD2.0
menu
may appear.
options,
angles, spoken language
chapters for the title.
and
start
playback
a
1 Press DISC MENU.
memorized
point. Up
to
be memorized.
can
The disc
is
menu
displayed.
2 To remove the disc menu, press DISC MENU
mark, follow these steps.
a
DVD
Disc Menu
from
again.
VCD1.1
MARKER SEARCH
points
To enter
menu, the menu will appear on the
3 To remove the title menu, press TITLE
1/9
You
a
Otherwise, the disc
2 The menu can list camera
scenes.
Marker Search
an
DVD
Title Menu
Note
The
DVD
discs: Menus
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
Angle
DVD
again.
1/1
memorize.
The Marker icon will appear
2
Repeat step
on
the TV
If the disc contains
briefly.
screen
1 to enter up to nine Marker
points
on a
disc.
To Recall
1
a
Marked Scene
disc
During
playback,
The MARKER SEARCH
menu
will appear
on
a
the
screen.
Marker
will start from the Marked
During
playback,
2
4
press SEARCH.
menu
will appear
on
the
ferent audio
repeatedly during playback
language or audio track.
repeatedly during playback to hear
(STER., LEFT or RIGHT).
Subtitles
DVD
Press SUBTITLE
different subtitle
SEARCH.
to hear a dif-
Press AUDIO
Press CLEAR.
remove
DVD
the Audio Channel
The Marker number will be erased from the list.
To
Language
Changing
VCD2.0
VCD1.1
a
dif-
ABC
1 ENG
repeatedly during playback
languages.
to see the
2 and 3 to erase additional Marker
numbers.
5
the Audio
screen.
Press 1/2 to select the Marker number that you want
Repeat steps
display.
ferent audio channel
to erase.
3
the
1 ENG
Press AUDIO
scene.
Marked Scene
disc
on
D
SEARCH.
The MARKER SEARCH
angle appears
a
5.1 CH
4 To remove the MARKER SEARCH menu, press
1
Changing
num-
3 Press SELECT/ENTER.
a
camera
angles, you
change
angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
The number of the current
seconds, press 1/2 to select
ber that you want to recall.
To clear
recorded at different
to a different camera
press SEARCH.
2 Within 10
Playback
scenes
can
Note
the MARKER SEARCH menu, press
If
appears, the feature is not available
on
the disc.
25
OPERATION
Operation
with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
CD
MP3
The DVD
Notes
MP3/WMA
Insert
1
play
Recordings
a
files that have
The
player
can
not read an MP3 file that has a file
extension other than
disc and close the
tray.
About
CD; Audio CD menu appears on the TV
go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
screen
a
technology.
WMA(Windows
compression of
JPEG
MP3/WMA Disc
limited
Press 3/4 to select the MP3/WMA then press
1.
SELECT/ENTER.
appears on the TV screen.
to the MP3/WMA-JPEG
menu
2.
move
3.
MP3 WMA
4.
Program
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Clear All
Folder8
5.
OFF
00:00
as
a
folder, and SELECT/ENTER.
Media
Press 3/4 to select
a
track then press PLAY
or
compatibility
move
Program
elapsed playing
menu.
to the
previous page.
Program
MP3 WMA
CD Creator", which creates an ISO9660 file system.
single session disc requires MP3/WMA files in the
TRACK02
TRACK 1.mp3
TRACK03
TRACK 2.mp3
TRACK04
TRACK 3.mp3
TRACK06
TRACK 6.mp3
TRACK07
TRACK 7.mp3
TRACK 8.mp3
Clear All
menu
00:00
Clear All
1
MP3/WMA
OFF
in
a
file list and want to return to the Folder list,
34 to
and press SELECT/ENTER to
are
To
26
should be named
incorporate ".mp3"
or
using
or
8 letters
highlight
previous menu
stop playback
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
This DVD
player requires discs/recordings
to meet
certain technical standards in order to achieve
Pre-recorded DVDs
are
optimal
automatically
screen.
at any other
types
(including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
required
permission
time, press STOP.
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
grant such permission. Permission should
to
return to the
5
or use a new one.
names
Customers should also note that
menu
Tip
the
MP3/WMA file in the 1st
of recordable disc formats
TRACK 5.mp3
Audio CD
no
set to these standards. There are many different
TRACK 4.mp3
TRACK05
If you
File
playback quality.
TRACK01
NORM.
is
to the next page.
move
STER.
player
A
e.g. "********.MP3"
the current track's
Press DISC MENU to
0: 56: 18
with this
follows:
and must
time will appear on the display window and
Playback will stop at the end of the disc.
use
6.
SELECT/ENTER.
TRACK08
offers double the audio
the MP3 format.
Sampling Frequency / only at 44.1 kHz (MP3),
(WMA)
Bit rate / within 32-320 kbps (MP3),
32-128 kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "Easy-
the disc
CD
Audio)
compression
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
3 A list of files in the folder appears.
Press TITLE to
Audio)
Microsoft audio
first track. If there is
Press 3/4 to select
Playback starts.
During playback,
Media
22.05-44.1 kHz
Press RETURN to
choice menu.
4
".mp3".
WMA(Window
An WMA file is
MP3 WMA
The MP3/WMA
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
MPEG1 audio
right.
on
Audio
2
Recordings
An MP3 file is audio data
MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on
can
MP3/WMA
About MP3
WMA
Player
on
always
be
sought
from the
copyright
owner.
right
with Audio and MP3/WMA Disc
Operation
CD
Pause
MP3
1 Press PAUSE/STEP
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
or
To repeat
1
press
CD
another Track
MP3
WMA
Press . twice
track.
case
briefly
to
step back
to the
previous
of audio CD, to go directly to any track, enter
using the numbered buttons (0-9)
during playback.
Repeat Track/All/Off
CD
MP3
WMA
on
the
at your chosen end
menu screen.
point.
repeat all tracks
on a
disc, press REPEAT
icon and "ALL" appears
a
on
the
MP3
Repeat icon and "OFF" appears
3D Surround
This unit
produce
can
on
the
play,
press
menu screen.
CD
a
3D Surround effect, which
speakers normally required
multi-channel audio from
a
or
to listen to
home theater system.
1 Press DISPLAY or AUDIO
3 Press 3/4
during playback.
repeatedly
until the desired sound is
selected.
menu screen.
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.
CD
3 To exit the sequence and return to normal
A-B again.
screen,
2 Press 1/2 to select "NORM." or "3D SUR".
second time.
Search
again
appears
Repeat icon and "A B" appears on the menu
and the sequence begins to play repeatedly.
more
screen.
Repeat
Repeat icon and "A
press A-B at your chosen start* "
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five
1 To repeat the track currently playing, press REPEAT.
The Repeat icon and "TRACK" appears on the menu
The
sequence.
2 Press A-B
The
the track number
2 To
a
CD
The
Press . or > briefly during playback to go to the
next track or to return to the beginning of the current
track.
In
A-B
During disc playback,
ing point.
The
Moving to
(Continued)
Changing
the Audio Channel
CD
Press AUDIO repeatedly during playback to hear
ferent audio channel (STER., LEFT, or RIGHT).
WMA
a
dif-
1 Press and hold . or > for about two seconds
during playback.
The
player
will
now
go into SEARCH mode.
2 Press and hold . or >
repeatedly to select the
required speed: mX2, mX4, mX8 (backward) or
MX2, MX4, MX8 (forward).
Search speed and direction
are
indicated
on
the
menu
screen.
3 To exit SEARCH
Random
mode, press PLAY
CD
1 Press RANDOM
MP3
.
WMA
during playback
or
when
playback
is
stopped.
The unit automatically begins Random
"RAND." appears on the menu screen.
2 To return to normal
repeatedly
Playback
and
playback, press RANDOM
disappears on the menu
until "RAND."
screen.
27
OPERATION
Operation
Viewing
a
with JPEG Disc
JPEG disc
JPEG
Player can play discs with JPEG files and
Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
This DVD
1
Insert
a
disc and close the
TV
menu
appears
on
the
screen.
JPEG
menu
appears
on
the TV
>
once
1 Press PAUSE/STEP
during viewing a picture
to the previous file.
to
or
screen.
JPEG
player
Folder2
Folder4
now
Press 3/4 during showing a picture
picture horizontally or a vertically.
To rotate
picture
Folder3
will
flip the picture
Press 1/2
Folder1
slide show.
during
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
The
To
Press 3/4 to select the JPEG then press
SELECT/ENTER.
The JPEG
or
Still Picture
MP3 WMA
2
to another File
Press .
advance to the next file
tray.
The MP3/WMA-JPEG choice
Moving
to
flip
the
picture
during showing
clockwise
or
a
picture
to rotate the
counter clockwise.
Folder5
Folder6
Folder7
Folder8
Slide
Press 3/4 to select
a
Speed
Notes
Off
folder, and SELECT/ENTER.
3 A list of files in the folder appears.
Press RETURN to
choice menu.
move
to the MP3/WMA-JPEG
Depending
use
"
"
in
a
file list and want to return to the Folder
the 34 buttons
on
the remote to
highlight
and press SELECT/ENTER to return to the
previous
4
menu screen.
If you want to view a particular file, press 3/4 to
highlight a file and press SELECT/ENTER or
PLAY.
Viewing the file proceeding starts.
During viewing a file, press RETURN
the previous menu (JPEG menu).
Press TITLE to
move
Press DSIC MENU to
JPEG
to move to
read the disc's contents. If you don't see an ondisplay after several minutes, some of the files
to the next page.
move to the previous page.
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
1024X768
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
Tip
are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Press 1/2 to highlight the Slide
There
then press 3/4 to select the
option
you want to
use, and press SELECT/ENTER.
To
stop viewing
5 The JPEG
28
big
---
reduce the resolution of the JPEG files
menu
at any other
appears.
time, press STOP.
pixels
and burn another disc.
Total number of files and folders
on
the disc should
be less than 650.
Some disc may be incompatible due to different
recording format or condition of disc.
When you are using software such as "Easy CD
Creator" to burn the jpeg files into the CD-R, ensure
that all the selected files have the ".jpg" extensions
when
copying
into the CD
If the files have
File
them
by
as
".jpe"
".jpg"
as
or
layout.
".jpeg" extensions, please
files.
".jpg" extension will not be able to
player. Even though the files are
JPEG image files in windows explorer.
names
be read
shown
Picture1.jpg
Speed
too
rename
Folder1
5/32
upon the size and number of the JPEG
a long time for the DVD player to
to less than 2 mega
are
Recordings
screen
Tip
list,
JPEG
files, it could take
are
If you
on
without
this DVD
Programmed Playback
Programmed Playback
CD
VCD2.0
with Audio CD
VCD1.1
function enables you to store your favorite
tracks from any disc in the player memory.
Program
Program
with Video CD
Note
On
a
setup
Video CD with PBC, you must set PBC to Off on the
menu to use the Program function. See page 18.
contain 30 tracks.
can
Press PROGRAM
1
WMA
Programmed Playback
and MP3/WMA Disc
The
MP3
mode to enter the
during playback or in
Program Edit mode.
the
E
The
mark will appear to the right of the word
on the right side of the menu screen.
stop
Program
Insert Video CD and close the
1
2
Press PROGRAM while
The VCD
Program
OPERATION
tray.
is
playback
stopped.
will appear.
menu
Program
VCD
E
TRACK 1
TRACK 2
Note
TRACK 3
Press PROGRAM to exit the
Program
TRACK 4
Edit mode;
TRACK 5
TRACK 6
E
the
mark will
disappear.
TRACK 7
Clear All
TRACK 8
Select
2 place
a track, then press SELECT/ENTER to
the selected track on the Program list.
Note
Repeat step 2
Program list.
3
to
place
Program
CD
E
on
the
Program
MP3 WMA
TRACK 12
TRACK 2
TRACK 8
TRACK 1.mp3
TRACK 2.mp3
TRACK 3
TRACK 10
TRACK 2.mp3
TRACK 4.mp3
TRACK 4
TRACK 3
TRACK 3.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 7
Clear All
TRACK 8
0: 56: 18
STER.
Audio CD
00:00
3
MP3/WMA
menu
on
5 playing.
playback
from
with
left.
on
programmed
on
the TV
screen.
Tracks
currently playing,
press REPEAT.
on
the
menu
screen.
To repeat all tracks on the program list, press
REPEAT a second time.
Repeat icon and "ALL" appears on the menu screen.
Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.
The
Press TITLE to
To cancel
to the next page.
Press DISC MENU to move to the previous page.
move
Press PLAY to start.
6 Playback begins
Erasing
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks
have played once.
normal
playback
on
the
a
programmed
disappear the
(or MP3/WMA)
and then press SELECT/ENTER.
"PROG." indicator disappears on the menu
screen.
Track from
Program
List
1 Press PROGRAM
Program list
MP3/WMA disc
Program
from
press PROGRAM to
mark and select a track of CD
playback,
"Programmed Playback
Repeat icon and "TRACK" appears
The
Press 3/4 to select the track you want to start
7
menu.
PROGRAM.
To repeat the track
programmed track you selected last is highlighted
resume
normal
Repeat Programmed
menu
the program list.
To
resume
"NORMAL" appears
OFF
Press 2.
The
2-6 of
Program
Clear All
TRACK 8.mp3
NORM.
steps
PROGRAM to exit the
4 playback, press
TRACK 5.mp3
TRACK 6
Follow
or
Audio CD and MP3/WMA disc"
To
TRACK 3.mp3
TRACK 4.mp3
Press RETURN
3
E
TRACK 8.mp3
TRACK 1
TRACK 5
4
additional tracks
E
list
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to move to the
Program
list.
3 Use 3/4 to select the track that you wish to erase
from the
Program
list.
4 Press CLEAR.
The track will be erased from the
Erasing
1 Follow
List"
as
the
Program list.
Complete Program
steps
1-2 of
"Erasing
a
List
Track from
Program
above.
2 Use 3/4 to select "Clear
All", then press
SELECT/ENTER.
The
complete Program for the disc
The programs
are
will be erased.
also cleared when the disc is removed.
29
Additional
On Screen
Operation
VCR part
-
Video Doctor
Display
You may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your VCR will appear on the TV screen. If a recording
is taking place these On Screen Displays will not be
recorded onto the tape.
(Self-Diagnosis)
This feature informs you that there is a problem with
error messages will appear on the TV
your VCR. These
screen.
1
Press i.
Press 1
or 2
to select Dr.
Press OK.
1
Press CLK/CNT to
Press CLK/CNT
display.
repeatedly
to
cycle through
the
The tape counter and amount of
tape left will appear if there is a tape loaded.
display options.
12
REC
majority of the On Screen
leaving only the clock or tape
After 3 seconds the
2 Displays
will clear
counter and the amount of
Press CLK/CNT
the TV
again
tape left
to remove all
the
on
ON
OFF
screen.
displays
PSET
R
fOSD
Pr-12
ACMS
+
16:9
4:3
TIME
DATE
SYSTEM
AB
C
OSD
VCR
VCR
Dr.
Dr.
-
DECODER
OKi
OPR
VCR
Dr.
from
VIDEO DOCTOR
HEAD STATUS
TAPE STATUS
screen.
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
OK
Tape
The
Counter
Digital Tape
i
Memory Stop
Counter
be displayed on the display
by pressing CLK/CNT on
Digital Tape Counter indicates
recordings on the tape.
can
window instead of the time
the remote control. The
the relative
1
positions
to check a
PLEASE CLEAN:
TAPE STATUS
O
or
start
play
Press STOP when
is
playback
or
recording
time in
complete.
Press C.LOCK.
(except Z).
If any buttons
on
the front of your unit
SAFE will flicker in the
display
are
window for
a
few
Press C.LOCK
2Shows
the number of timer
PR-01 26 10:00~11:00SP
3
Press i.
ez
(easy) repeat
again
to switch off the child lock.
display
window.
recording.
By pressing & holding ez REPEAT during play back,
holding section is replayed twice automatically.
1
During play back, press
point where repeat play
& hold
2
Release
REPEAT at the
ez
ez
the
REPEAT at the
is to be concluded.
Then, your VCR will go into
OFF will appear in the
recording.
Shows the current status of timer
pressed
seconds.
tape with its protection tab in place
NEXT TIMER PROGRAMME
O
SAFE will appear in the display window.
None of the buttons on the front of your unit will
a
NO. OF TIMER PROGRAMME
O
Press BACKWARD.
work
NOT RECORDABLE:
Insert
recording.
The tape counter will display the actual
hours, minutes and seconds.
problem.
Clean your video heads.
Press CLEAR to set the counter to 0:00:00.
Child Lock
2
3 or 4
HEAD STATUS
O
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
1
Press
Press CLK/CNT.
Press PLAY
2
of
2
reverse
point
search.
where repeat
play
is to start.
The
holding
section is
replayed
twice
automatically.
Note
Pressing
ez
REPEAT
return to normal
30
play.
again during repeat play,
will
Additional
Operation
Hi-Fi Stereo Sound
Your VCR will record and
-
VCR part
System
playback
2
Press D
E
to select:
repeatedly
AUTO,
4:3 or
AUTO:
Hi-Fi stereo sound.
This allows you to record and playback the sound in
several different ways. Video cassettes recorded on
Automatically plays
your VCR will have a normal mono audio track and two
VHS Hi-Fi stereo audio tracks. These stereo tracks
back Wide-Screen
programmes
as
Wide-Screen and Normal
programmes
as
normal.
4:3
Only for playing back
recordings (4:3).
allow you to make audio recordings in Hi-Fi stereo or
bilingual mode from a TV broadcast, stereo audio system,
video disc or another Hi-Fi VCR.
and
recording
Normal format
16:9:
Only
playing back and recording Wide-Screen
recordings (16:9).
for
format
Your VCR's allows you to enjoy broadcasts with
standard stereo, bilingual and mono sound. The
1
or
16:9.
particular type of sound received or that recorded
briefly displayed on the TV screen for a
couple of seconds:
will be
12
STEREO
Sound is
and
REC
Pr-12
PSET
R
automatically
mono
recorded
ON
OFF
the Hi-Fi stereo
on
AUTO
ACMS
fOSD
+
16:9
4:3
AB
C
VCR
OSD
Dr.
16:9
4:3
4:3
16:9
-
DECODER
i
tracks of the video tape.
BIL
Both audio channels will be recorded
stereo tracks. The
will be recorded
the
mono
the Hi-Fi
channel
primary language
on
on
3
(left)
Press i to
remove
the
menus
from the TV
screen.
enjoy Wide-Screen playback you must
connect your VCR to the TV using a SCART
To
cable.
track of the video
To set the decoder
tape.
MONO
The sound is recorded
mono
on
the Hi-Fi tracks and the
track of the video tape without any
Press AUDIO
repeatedly
separation.
until the desired audio
2
mode appears.
3
The choice is STEREO, LEFT, RIGHT and MONO.
In BIL playback the primary language is output
onthe left channel and the
secondary
adjusting
the
1
tracking
Press i.
The main
Press F
is MONO.
Please note that when
already described, how to connect a decoder
pay-TV station as CANAL+ or PREMIERE on page
9. For the recording of an encoded station you do not
have to control anything. You just select the station and
wait shortly until the decoding will start.
for
channel is
output simultaneously from the right channel when
audio output is set to STEREO. The primary language
willbe output from both channels when the audio
setting
We have
control
menu
or
will appear
on
the TV
screen.
G to select the DECODER.
Press OK.
2
Press D
or
E to select.
ON: When the decoder is connected to the AV2
socket.
OFF: When another VCR is connected to the AV2
Hi-Fi stereo sound may revert to MONO.
socket.
Wide Screen
16:9
Compatibility
Press i to return to
a
TV
picture.
Your VCR can record and play back wide screen aspect
ratio programmes (16:9). To record a wide screen format programme successfully the correct type of wide
screen signal must be broadcast by the TV station.
1
Switch
your VCR.
on
Press i.
Press F
or
G to select 16:9/4:3.
Press OK.
12
REC
PSET
R
fOSD
ON
OFF
Pr-12
ACMS
+
16:9
4:3
TIME
DATE
-
DECODER
OPR
SYSTEM
AB
C
VCR
OSD
Dr.
12
16:9
4:3
OKi
REC
PSET
R
fOSD
ON
OFF
16:9
4:3
Pr-12
S
SAB
C
ACMS
AUTO
+
4:3
16:9
-
DECODER
OSD
VCR
Dr.
16:9
4:3
i
31
OPERATION
Additional
Operation
Last Condition
DVD
This
CD
-
DVD
part
Memory
VCD1.1
memorizes the last condition for the last
player
disc you have watched. Settings remain in memory
even if you remove the disc from the player or switch off
the
player.
If you load
a
disc that has its
settings
memo-
rized, the latest stop position is automatically recalled.
Notes
--
--
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
it.
Screen Saver
The
screen saver
DVD
32
Player
in
picture
appears when you leave the
stop mode for about five minutes.
Special Recording
Copying
from DVD To VCR
This unit allows you to copy the contents of
VHS tape with a press of the COPY button.
Recording from
a
DVD to
a
recorder
protected,
1
2
to copy is copy
not
be
able
to copy the disc.
you may
3 Copy
a
videotape
the DVD to VHS
Press the COPY button
from
camcorder.
Note
into the VCR deck.
following description, this video recorder will be
recording and will be referred to as VCR
The other appliance will be used for playback and
one
B.
used for
will be referred to
Tape
or
REC/ITR button
on
as
VCR A.
Play
the
menu
button
appears, you may need to
manually
to
begin copying.
Process
Copy
4 Stop
When the
is finished playing, press STOP
DVD
twice within 5 seconds to end the copy.
You must stop the Copy process manually when
the DVD movie ends,
record over and over
or
VCR A should be connected to the SCART socket
on
the
the unit may
replay
panel
panel of
rear
of your unit
your unit.
or
the AV sockets
on
the
The DVD will go into Play mode and the VCR will
go into Record mode.
If the DVD disc
1
the front
panel.
press the
recordings
from another video
Tape
blank VHS
unit front
make
In the
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
Insert VHS
or a
can
copying
attempting
are
Insert Disc
Insert
recorder
With this video recorder you
an external source, such as
Note
If the DVD you
another video
Insert the recorded tape into VCR A and
into VCR B.
2 tape
press the REC/ITR
VCR A.
3
To start
4
When you want to finish
on both video recorders.
recording,
and PLAY
on
copying,
on
a
blank
VCR B
press the STOP
Press STOP twice within 5 seconds at this unit.
and
again.
33
OPERATION
Troubleshooting
Check the
following guide
for the
possible
cause
VCR do not
or
work
properly.
a
before
problem
service.
contacting
Cause
Symptom
DVD
of
DVD
or
Correction
VCR button is not switched
Refer to page 2.
properly.
No power.
The power cord is disconnected.
Plug the power
securely.
The power is on, but
the DVD player does
not work.
No disc is inserted.
Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
No
The TV is not set to receive DVD
picture.
signal
Select the
the TV
on
output.
player
No sound.
not start
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
are
not connected
properly.
jacks
securely.
The power of the equipment connected
with the audio cable is turned off.
Turn on the equipment connected with
the audio cable.
Digital Audio Output
position.
The disc is dirty.
The TV channels
An
unplayable
is set to the
are
properly.
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
Place the disc with the
down.
down.
within the
Clean the disc.
Check tuning, carry out
tuning again.
Insert a playable disc. (Check the disc
type and Regional code.)
disc is inserted.
placed
Set the
correct
not tuned in
placed upside
The disc is not
does not work
Connect the audio cable into the
jacks
securely.
The disc is
The remote control
screen.
equipment connected with the
audio cable is not set to receive DVD
The
player does
playback.
the TV
securely.
wrong
The DVD
on
securely.
The
is poor.
appears
The video cable is not connected
The audio cables
picture
appropriate video input mode
the picture from the DVD
so
Connect the video cable into the
signal output.
The
cord into the wall outlet
guide.
playback
Place the disc on the disc tray
inside the guide.
The disc is
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
the rating level.
Rating
There is an obstacle in the path of the
remote control and this unit.
Remove the obstacle.
The batteries in the remote control
exhausted.
Replace
Video tape cannot be
inserted.
Is the cassette compartment
No Hi-Fi sound
Audio mode is not set
are
empty?
properly.
Eject
the batteries with
or
side
correctly
change
new ones.
the tape in.
Select "STEREO" by repeatedly
"AUDIO" on the remote control.
pressing
Video Head
Cleaning
accumulating on the head after a long period of time can cause the playback picture to
up. High quality video cassette tapes will not normally deposit dirt onto the video head, but
might. Clean the video heads with a commercially available video heads cleaning tape.
Dirt
34
become blurred or broken
old or damaged tapes
Language Code
Enter the
(See
appropriate
17).
List
code number for the initial
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
35
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country Code" (See
page
19).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Liechtenstein
SD
Sudan
ET
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and Barbuda
Spain
Ethiopia
LI
AF
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
Belgium
GL
Greenland
MO
Macau
SZ
Swaziland
BE
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
Guyana
MZ
Malaysia
Mozambique
TO
Tonga
BT
Bhutan
HK
Hong Kong
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
Central African
ID
Indonesia
NO
UG
CG
Congo
IE
Ireland
NP
Norway
Nepal
CH
Switzerland
IL
Israel
NR
Nauru
UM
Uganda
United Kingdom
USA Minor Outlying
CI
Ivory Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
Oman
UY
Uruguay
Cameroon
IQ
Territory
Iraq
OM
CM
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
Virgin Islands (British)
CV
Cape Verde
JP
PL
Poland
VI
Virgin Islands (USA)
CX
Christmas Island
KE
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Japan
Kenya
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
DE
Republic
Germany
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
Mayotte
DM
Dominica
KP
North Korea
QA
Qatar
YU
Yugoslavia
(Keeling) Islands
Republic
Anguilla
UK
Islands
Miquelon
City State
Grenadines
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman Islands
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
36
Republic
(French)
Specification
General
Power
requirements
AC 200-240V, 50 Hz
Power
consumption
23W
Dimensions
Mass
430 X 85 X 293
(approx.)
4.8
(approx.)
mm
(w/h/d)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
RF Modulator
UHF 22-68
(41˚F
to
REF NC
95˚F)
display tape
(Adjustable)
System
Laser
Semiconductor laser,
Video Head system
Double azimuth 4 heads, helical
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
wavelength
650
nm
scanning.
CD:8Hzto20kHz
ratio
Signal-to-noise
(ANALOG OUT
More than 100dB
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
connectors
only)
(DVD)
(CD)
Inputs (VCR)
Audio
Video
-6.0dBm,
-6.0dBm,
more
than 10 kohms
more
than 47 kohms
1.0
75 ohms, unbalanced
(SCART/RCA)
1 Vp-p 75 ohms, sync negative
(Y) 1.0 Vp-p 75 ohms, negative
(C) 0.3 Vp-p 75 ohms
sync., Mini Din
Vp-p,
(SCART)
(RCA)
Outputs (DVD)
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
Audio output
(digital audio)
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
0.5V(p-p),75Ω,RCAjackx1
Audio output
(optical audio)
3 V
Audio output
(analog audio)
2.0 Vrms
(p-p),
75
Ω, Optical
(1 KHz,
0
dB),
connector
600
x
4-pin
x
x
1
1
1
Ω, RCA jack (L, R)x2/SCART (TO TV)
Outputs (VCR)
Audio
-6.0dBm, less than 1 kohms (SCART)
Video
1.0Vp-p,
Design
and
specifications
are
subject
to
change
75 ohms, unbalanced
without notice.
Manufactured under license from
Confidential unpublished works.
"DTS" and "DTS Digital Out"
are
(SCART)
Dolby Laboratories. "Dolby" and the double-D symbol are trademarks
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
trademarks of
Digital Theater Systems,
of
Dolby Laboratories.
Inc.
37
P/NO
:
3834RP0104S
Download PDF

advertising