LG | RH188H | LG RH188H Owner's manual

RH1878P1S/RH1888P1S/RH1979P1S/RH1F99P1S_NA1ALL_ENG
HDD/DVD
RECORDER
OWNER'S MANUAL
MODEL: RH188S/RH188HS/
RH199S/RH200MHS
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
CAUTION: The
CAUTION
(dripping
as
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
or
vases,
CAUTION
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL
.
concerning the
Power Cord
appliances recommend they be placed upon a
circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch circuits.
Check the specification page of this owner's manual to be
Most
dedicated
certain.
This
lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation
triangle
point
within
an
is intended to alert the
equilateral
user
to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying
the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
Slots and
openings
ensure
it from
over
Protect the power cord from
physical or mechanical abuse,
being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
such
as
To disconnect power from the mains, pull out the mains cord
plug. When installing the product, ensure that the plug is
accessible.
Disposal
Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
in the cabinet
reliable
operation
are
of the
provided for ventilation
product and to protect
heating.
The openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface.This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
the manufacturer's instruction have been adhered to.
outlets, loose
damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized servicer.
easily
CAUTION:
and to
Do not overload wall outlets. Overloaded wall
or
of your old
appliance
1. When this crossed-out wheeled bin
symbol is
product it means the product is
covered by the European Directive 2002/96/EC.
All electrical and electronic products should be
disposed of separately from the municipal
waste stream via designated collection facilities
appointed by the government or the local
attached to
2.
a
authorities.
3. The correct
disposal of your old appliance will
help prevent potential negative consequences
for the environment and human health.
4. For
detailed information about disposal
appliance, please contact your city
office, waste disposal service or the shop
where you purchased the product.
more
of
your old
This
CLASS 2M VISIBLE AND INVISIBLE LASER RADIATION
product is manufactured to comply with
requirements of EEC
DIRECTIVE 89/336/EEC, 93/68/EEC and
WHEN OPEN AND INTERLOCKS DEFEATED DO NOT
73/23/EEC.
the radio interference
CAUTION:
STARE INTO THE
BEAM OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS.
CAUTION:
This
To
product employs
a
Laser
System.
proper use of this product, please read this
owner's manual carefully and retain it for future reference.
ensure
Should the unit
require maintenance,
contact
an
authorized
service center.
Performing controls, adjustments, or carrying out procedures
specified herein may result in hazardous
other than those
radiation exposure.
prevent direct exposure to laser
To
beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
2
ViewingaJPEGFile..................31-32
.33-34
Editing a MP3/WMA, JPEG, DivX file
Contents
.
.
.
.
.
Introduction.............................4-9
SymbolUsedinthisManual................4
NotesonDiscs..........................4
.5
RecordableandPlayableDiscs
PlayableDiscs..........................6
RegionalCode..........................6
.6
Availability of copying or moving feature
.
.
Abouttheinternalharddiskdrive
Card useable
on
this unit
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
(RH200MHS only)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.7
.7
FrontPanel.............................8
RemoteControl.........................9
RemoteControlOperation.................9
HookupandSettings...................10-23
RearPanel............................10
ConnectingtotheAerial..................10
ConnectionstoYourTV..................11
HDMI connection
(RH188HS, RH200MHS only) 12
ConnectingtoanAmplifier................13
Accessory Audio/Video (A/V) Connections .14-15
UsingtheHomeMenu...................16
InitialSettings..........................16
GeneralOperation....................16
GeneralSettings.....................16-19
AutoProgramming...................16
ProgramEdit........................17
.
AutoClockSet/ManualClockSet
.
.
.
.
.
.
.18
TVAspect/DisplayMode..............18
Progressive Scan (RH188S/RH199S only) .18
Recording............................35-42
AboutDVDrecording....................35
AboutHDDrecording....................35
Timeshift..............................36
BasicRecordingfromaTV................37
InstantTimerRecording..................37
TimerRecording........................38
Timer Recording with SHOWVIEW System.
.39
.40
Checking Timer Recording Details
.40
RecordingfromanExternalInput
RecordingfromDVInput.................41
Simultaneous recording and playback
.42
.42
Playback another title during recording
TimeSlip...........................42
MPEG4Recording......................42
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Editing...............................43-50
Title List and Chapter List Menu Overview
.43
.44
HDD, VR Mode: Original and Playlist Editing
AddingChapterMarkers.................44
ChangingTitleThumbnails................44
MakingaNewPlaylist....................45
Adding Additional Title/Chapters to the Playlist .45
.46
Deleting an Original or Playlist Title/Chapter
DeletingaPart.........................46
NamingaTitle.........................47
.
.
.
.
.
.
.
TimeSearch..........................47
Sort.................................48
.
AV2 Connection / Power Save Mode
.
.
.
.
.
.18
Initialization.........................19
LanguageSettings......................19
AudioSettings.........................19
.19
DolbyDigital/DTS/MPEG.
SamplingFrequency..................19
.19
DRC(DynamicRangeControl).
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Vocal..............................19
.20
Lock(ParentalControl)Settings
.20
Rating/SetPassword/AreaCode
DivXRegistrationCode...............20
RecordingSettings......................21
.21
RecordModeSet/RecordAspect.
DV Recording Audio / TV Recording Audio .21
Auto Chapter / MPEG4 / AV2 Recording
.21
DiscSettings........................21-22
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Finalize/DiscLabel..................22
DiscProtect/PBC...................22
Explanation
of On-Screen
Display
.
.
.
.
.23
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.48
.48
DivideOneTitlesIntoTwo................49
.49
CombiningTwoChaptersIntoOne
MovingaPlaylistChapter.................50
HideaChapter/Title.....................50
.
.
.
.
.
.
.
.
.
ProtectaTitle..........................50
Dubbing..............................51-53
BeforeDubbing.........................51
DubbingfromHDDtoDVD...............52
DubbingfromDVDtoHDD................52
.53
OneTouchCopy(HDDtoDVD).
.53
OneTouchCopy(DVDtoHDD).
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Reference............................54-59
AdditionalInformation....................54
OverwritingRecording.................54
Viewing Title List menu displayed on other
DVDRecordersorPlayers.............54
Playing Your Recordings on Other DVD
.54
Players(FinalizingaDisc).
LanguageCodes.......................55
.
Playback.............................24-34
.24-27
GeneralPlaybackFeatures
PlayingaDivXMovieFile.................28
.29
PlayinganAudioCDorMP3/WMAfile
Program Playback with Audio CD and
.
.
.
DiscFormat........................21
General
Undoing/Redoing the Last Deletion
CombiningTwoTitlesIntoOne
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AreaCodes...........................55
Controlling
Your TV with the
Supplied
.
MP3/WMAfile..........................30
RemoteControl........................56
Troubleshooting......................57-58
Specifications..........................59
3
Introduction
Notes
on
To
ensure proper use of this product, please read this
owner's manual carefully and retain for future
Handling
Discs
Do not touch the
the
reference.
disc
on
by
the
Discs
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
This manual
information
provides
on
the
or
tape
on
the disc.
operation
and maintenance of your recorder. Should the unit
require service, contact an authorized service location.
About the
"
Symbol Display
"
may appear on your TV display during
operation and indicates that the function explained in
this owner's manual is not available
on
that
specific
media.
Used in this Manual
Symbol
Note:
Indicates
special
notes and
operating
features.
Tip:
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Indicates
tips
and hints for
A section whose title has
applicable only
symbol.
are
HDD
RAM
of the
following symbols
represented by the
the HDD
All DVD discs listed below.
DVD-RW with VR
-RW Video
recording
DVD-RW with Video
DVD+RW disc
-R
DVD-R disc
+R
DVD+R
DVD
one
DVD-RAM disc
-RW VR
+RW
on
the task easier.
making
to the disc
Titles recorded
DVD ALL
(DL)
mode
recording
mode
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
vinyl
records.
disc
DVD-Video disc
Moisture Condensation
VCD
Video CDs
ACD
Audio CDs
DivX
DivX files
moving
MP3
MP3 files
Leave it for two
WMA WMA files
JPEG JPEG files
4
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Never
If you
operate this product immediately after
it from
use
damage
this
a
cold location to
or
a warm
three hours without
product
in such
discs and internal
a
parts.
location.
operating
situation, it may
it.
Recordable and
DVD-RW
Playable
Video Disc ReWritable):
be formatted for VR mode
(Digital
DVD-RW discs
These Discs
on
the
Discs
-
can
be recorded
can
on
recording
repeatedly. Recordings
or
Video mode
be
can
recording.
erased, then you
can
record
again
Disc.
same
[VR mode]
Recordings can be extensively edited
Playable only on VR mode compatible players (after finalization)
[Video mode]
Playable on regular DVD players (after finalization)
Limited editing features
DVD-R
Video Disc Recordable)
be recorded only once. After you finalize
DVD-R discs can be only formatted to Video mode.
(Digital
These Discs
-
can
a
DVD-R, you
cannot record
on
it
or
edit it.
Playable on regular DVD players (after finalization)
editing features
Limited
DVD-RAM
DVD-RAM discs
Random Access Memory)
can be formatted for VR mode
These Discs
be recorded
the
(DVD
-
can
on
recording.
repeatedly. Recordings can be erased,
Playable on DVD-RAM compatible players.
Recordings can be extensively edited.
Only DVD-RAM standard Version 2.0, 2.1 and 2.2
You cannot use the cartridge-type DVD-RAM disc
DVD+RW
(Digital
These Discs
on
the
same
Playable
can
Video Disc + ReWritable)
be recorded on repeatedly.
record
again
on
discs
can
be used in this unit.
in this unit.
Recordings
be
can
erased, then you
can
record
again
DVD+RW
on
Recordings
can
(Digital
These Discs
it any
can
Disc.
compatible players (automatically finalization)
playable on DVD+RW compatible players only
edited the title/chapter
The edited contents
DVD+R
then you
Disc.
same
be
are
Video Disc + Recordable)
be recorded only once. After you finalize
can
a
after finalization
DVD+R, you
cannot record
on
it
or
edit
more.
Playable on DVD+R compatible players (after finalization)
Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine,
added chapter mark, etc.)
Limited title/chapter editing features.
DVD+R DL
(Digital
These Discs
Video Disc
be recorded
+
Recordable; Double Layer)
it
or
nearly doubled with double layer DVD+R media, allowing consumers to record
on a single DVD+R disc.
Playable on DVD+R DL compatible players (after finalization)
Any edited contents are not be compatible on DVD+R DL compatible players. (Hide, chapter
combine, added chapter mark, etc.)
Limited title/chapter editing features.
up
edit it any
Storage
can
only
once.
After you finalize
a
DVD+R
DL, you
cannot record
on
more.
space is
to 8.5GB of video
Recommended recordable DVD discs
DVD-R
DVD+R
Mitsubishi
(8x, 16x)
That's (8x, 16x)
Verbatim (8x)
Mitsubishi
--
--
Note: If
a
the
using this recorder.
original recorder.
DVD+RW
Mitsubishi
(4x)
Verbatim (4x)
JVC (4x)
Victor (4x)
Maxell (4x)
DVD-RW/DVD+RW discs is recorded
format the disc
using
DVD-RW
(8x, 16x)
Ricoh (8x, 16x)
Verbatim (8x)
using
So if you want to
a
use
Mitsubishi
(4x)
SONY (4x)
Imation (4x)
Maxell (4x)
Ricoh (4x)
personal computer
the disc
on
this
or
DVD+R(DL)
(2.4x, 8x)
Maxell (2.4x)
Mitsubishi
-
-
-
-
-
other DVD
recorder, you
DVD-RAM
Fujifilm (2x)
Mitsubishi (3x)
Maxell (5x)
recorder, you
cannot
must format the disc
5
Discs
Playable
DVD(8cm/12cmdisc)
Discs such
Video CD
movies that
as
(VCD) (8
VIDEO CDs
or
cm
be
can
/ 12
cm
purchased
or
rented
disc)
CD-Rs/CD-RWs in VIDEO
CD/Super
VIDEO CD format
AudioCD(8cm/12cmdisc)
Music CDs
CD-Rs/CD-RWs in music CD format that
or
CD-R/CD-RW
(8
cm
/ 12
cm
can
be
purchased
disc)
CD-R/CD-RW discs that contain audio
titles, DivX, MP3, WMA,
or
JPEG files.
Notes:
recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some
played on the unit.
Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.
Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may
not be playable.
DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder
may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder's lens.
If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases
in which it may not play because of the settings of the application software used to create the disc. (Check
with the software publisher for more detailed information.)
This recorder requires discs and recordings to meet certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types
of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain preexisting conditions (see above) to ensure compatible playback.
Customers should note that permission is required in order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such permission. Permission should always be sought from the
copyright owner.
Depending
CD-R/RW
on
the conditions of the
(or DVD±R/RW)
discs cannot be
Regional Code
This unit has
the
rear
Notes
a
regional
of the unit
on
or
Regional
code
printed
on
the
rear
of the unit. This unit
a
globe
with
one or more
numbers in it
clearly
match your unit's regional code or the disc cannot play.
If you try to play a DVD with a different regional code from the
back" appears
Availability
of
on
the TV
To
HDD
DISC
DISC
DISC
Memory
Memory
same as
Memory
or
on
the
cover.
This number must
Card* 2
Card*
2
feature
moving
MP3/WMA
HDD
Memory
visible
unit, the message "Incorrect region code. Can't
JPEG
DivX
Audio CD
Video CD
Title*
No
No
No
No
No
Yes
No
Yes
No
No
No
No
Yes
Yes
Yes
No
No
Yes
No
Yes
No
No
No
No
Card* 2
DISC
No
No
No
No
No
No
Card* 2
HDD
Yes
Yes
No
No
No
No
*1 The title is recorded from this unit.
*2 The RH188S/RH188HS/RH199S do not have memory card slots.
6
DVD discs labeled
screen.
copying
From
HDD
play only
Codes
Most DVD discs have
play
can
"ALL".
1
About the internal hard disk
Card useable
drive
(RH200MHS only)
The internal hard disk drive
(HDD) is a fragile piece
equipment. Please use the recorder following the
guidelines below to protect against possible HDD
of
Compact
(CF)
(MD), ST1 MD
Secure Digital Card (SD), Mini SD
Multi Media Card (MMC), MMC Plus,
We recommend that you back up your important
recordings onto DVD discs in order to protect against
Install and
the recorder while it is
use
the recorder
on a
Do not block the
Do not
rear
(xD)
Memory Stick (MS), MS Duo, MS Pro, MS Pro Duo
Compatible with: FAT 12, FAT 16, or FAT 32
Only use the memory cards recommended above.
stable, level
vent/cooling
the recorder in
Regarding
fan.
temperature
can cause
the recorder. This
can
hot
or
humid
condensation to form inside
be
a cause
Write Protect
For cards that have
excessively
places, or in places that may be subject to sudden
changes in temperature. Sudden changes in
use
MMC,
xD-Picture Card
on.
surface.
RS
MMC Mobile
accidental loss.
move
Flash Card
Micro Drive
failure.
Do not
this unit
on
is
on
it will not be
a
write
possible
protect switch, if the switch
write, erase or format
to
the card.
the
Inserting/Removing
Memory Card
of HDD failure.
Slot 1
While the recorder is switched on, do not unplug
from the wall socket or switch the electricity off from
Slot 2
the breaker switch.
Do not move the recorder immediately after
switching it off. If you need to move the recorder,
please follow the steps below:
Insert
CF, MD,
Insert SD, Mini SD,
MMC, MMC Plus,
RS MMC, MMC Mobile,
xD, MS, MS Duo,
MS-Pro, or MS Pro Duo
or
ST1 MD
1. After the message POWER OFF is shown in the
display, wait at least two minutes.
2.
card
from the wall socket.
Unplug
3. Move the recorder.
If there's
there is
a
power failure while the recorder is on
chance that some data on the HDD will
a
Inserting the card
Insert straight-in until
be lost.
The HDD is very delicate. If used improperly or in
an unsuitable environment, it is possible that the
HDD will fail after
a few years of use. Signs of
playback unexpectedly freezing
and noticeable block noise (mosaic) in the picture.
However, sometimes there will be no warning signs
problems
Removing
it fits into
the card
Slot 1: Withdraw the card
Slot 2: Press
the card
include
place.
on
carefully.
the center of the card then withdraw
carefully.
Notes:
Keep
of HDD failure.
the memory card out of reach of children. If
swallowed, seek medical advice immediately.
If the HDD
fails, no playback of recorded material
possible. In this case it will be necessary to
replace the HDD unit.
A memory card may not be used for this recorder
Do not extract the memory card in operating
will be
(play,
copy, move,
etc.).
Using Memory Card
1.
Insert
2.
Press HOME
3.
Select
[MUSIC]
or
4.
Select
[Memory
Card
a
memory card.
on
press ENTER.
Details for the
the remote control.
[PHOTO] option.
options
1]
or
[Memory
are on
Card
2]
then
page 16.
7
Front Panel
e
ab
c
HDD/DVD
Set the recorder's mode to HDD
defghijk
f
x (STOP)
Stops playback
Starts
nop
Pause
press
c
d e f ghijk
h
z (REC)
recording.
recording time.
i
j
d ef gh j k
PROG.
Press
repeatedly
to set the
(V/v)
Scans up
nop
RH199S
c
recording.
playback.
playback or recording temporarily,
again to exit pause mode.
Starts
ab
DVD.
gN/X(PLAY/PAUSE)
RH188S/RH188HS
ab
or
or
or
TIMESHIFT
down
memorized channels.
through
(RH188S, RH199S)
TV/playback (timeshift)
Activates pause live
live TV program.
j
RESOLUTION
Sets the
for
a
(RH188HS, RH200MHS)
output resolution for HDMI and
COMPONENT/ PROGRESSIVE SCAN VIDEO
OUT
-
lm
i n op
RH200MHS
-
a
k
Remote Sensor
Point the recorder remote control here.
l
MEMORY CARD Slot 1
POWER button
or
OFF.
m
timeshifting
REC: The recorder is
mode.
recording.
Connect the DV
o
dubbing.
Indicates when the recorder is in TV tuner
mode.
:
Indicates when the recorder is in timer
or a
timer
recording
d
OPEN/CLOSE
Opens
8
or
Indicates
is
programmed.
clock, total playing
time, elapsed time, title number, chapter/track
number, channel, etc.
:
(Z)
closes the disc
tray.
AV IN 4
output of
a
digital
camcorder.
(S-VIDEO IN)
Connect the S-Video
DVD: The recorder is DVD mode.
HDD bBDVD: The recorder is
Duo).
nDVIN
HDD: The recorder is HDD mode.
recording
(RH200MHS only)
a
MS Duo/MS Pro
Shows the current status of the recorder.
TV:
(RH200MHS only)
(CF/MD/ST1 MD).
memory card
memory card (SD/Mini SD/MMC/MMC
Plus/RS MMC/MMC Mobile/xD/MS/MS-Pro/
window
T/S: Indicates the
a
MEMORY CARD Slot 2
Insert
Disc Tray
Insert a disc here.
c Display
1080i, 720p, 576p, 576i
576p, 576i
COMPONENT:
Insert
Switches the recorder ON
b
jacks.
HDMI:
output of
an
external
source
(TV/ Monitor, VCR, Camcorder, etc.).
p
AV IN 4
(VIDEO
IN/AUDIO IN
Connect the audio/video
(Left/Right))
output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
AV/INPUT:
Remote Control
or
Changes the input to
recording (Tuner, AV1-4,
IN).
for
use
DV
0-9 numerical buttons: Selects
numbered
options in a menu.
Copies DVD to HDD
to DVD).
DUBBING:
(or
HDD
TV Control Buttons: See page
56.
a
b
AUDIO
(
language
an
audio
(
):
Selects
a
subtitle
language.
b
the
Program
REC
track number
a
List
the Marker Search
c
or a
mark
on
menu.
recording.
Selects the recording
REC MODE:
mode.
Record
Displays
Timer
/
(m
backward
M):
or
picture.
the
ON
DVD disc. Switches between Title
closes the disc
tray.
Repeat
and Title
sequence.
menu on a
List-Playlist
a
thumbnail
TV/DVD: To view channels
selected
menu.
List-Original
a
THUMBNAIL: Selects
MENU/LIST: Accesses
and
off.
chapter
playing/recording.
I.SKIP (INSTANT SKIP): Skips 15
seconds forward during playback.
REPEAT: Repeat chapter, track,
A-B:
POWER: Switches the recorder
(Z): Opens
on or
Enlarges video image.
Displays the disc's Title
marker when
d
or removes
the
or removes
menu.
title, all.
HOME
OFF.
SETUP: Accesses
(N): Starts playback.
STOP (x): Stops playback or
recording.
a
or
Marker Search
Displays
menu.
CHP. ADD: Inserts
(X) : Pause
recording temporarily.
HOME: Accesses
point during
playback.
menu, if available.
forward.
or
PLAY
OPEN/CLOSE
MARKER: Marks any
TITLE:
Search
PAUSE/STEP
playback
menu.
TIMESHIFT: Activates pause live
TV/playback (timeshift) for a live
ZOOM:
SKIP(./>):Gotonextor
previous chapter or track.
e
(O)
PIP: Selects PIP function
menu.
c
SCAN
RETURN
Setup
TIMER REC:
d
Display.
SEARCH:
Starts
(z):
DISPLAY: Accesses On-Screen
TV program.
CLEAR: Removes
on
-
e
audio channel.
or
SUBTITLE
( )
Acknowledges menu selection.
Displays information while
viewing a TV program.
PR/CH (+/-): Scans up or down
through memorized channels.
Removes the
Selects
):
ENTER
-
by
by
the recorder tuner
or
the TV tuner.
RESOLUTION
RH200MHS
(RH188HS,
only): Sets the output
resolution for HDMI.
menu.
DVD: Selects the unit's function
b / B / v / V
mode to DVD.
Selects
an
(left/right/up/down):
option in the menu.
HDD: Selects the unit's function
SHOWVIEW
program
:
To
display
the
for SHOWVIEW
menu
System programming.
mode to HDD.
Remote Control
Remote Control
Operation
Point the Remote Control at the remote
sensor
and
Installation
Remove the
rear
press the buttons.
battery
of the Remote
insert two R03
Caution
Do not mix old and
Battery
batteries with
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
cover on
Control,
the
and
(size AAA)
and
matched
correctly.
9
and
Hookup
Settings
Rear Panel
a
ab
cd ef
jk
lmn
gh
i
AERIAL
Connect the aerial to this terminal.
b
c
HDMI
(Type A)
only)
output providing a high quality
digital
audio and video.
(VIDEO
Connect to
e
AV IN 3
a
output
Set
an
external
Top Box, VCR, etc.).
/ AUDIO OUT
TV with video/audio
(VIDEO
IN/AUDIO IN
(Left/Right))
inputs.
l
m
f
Connect
g
audio out
(Digital
to digital (coaxial)
OPTICAL
jack)
audio equipment.
from the AERIAL to your
a
S-Video
Input
TV.
on
EURO AV 1 AUDIO/VIDEO
a
TV with SCART
jack.
VIDEO OUT SELECT Switch
Select either COMPONENT
or
RGB
EURO AV1 AUDIO/VIDEO terminal
(Left/Right))
output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
signal
S-VIDEO OUT
Connect to
Connect the audio/video
COAXIAL
RF. OUT
Connect to
of
source.
TV/monitor
k
(Pay-TV decoder,
AV OUT 3
into the power
Passes the
interface for
EURO AV 2 DECODER
source
d
j
RH200MHS
Connect the audio/video
AC Power Cord
Plug
HDMI Connector
(RH188HS,
i
signal of
depending
on
how you connect the recorder to the TV.
n
COMPONENT/PROGRESSIVE SCAN VIDEO
OUT
(Y
Pb
Connect to
Pr)
a
TV with Y Pb Pr
inputs.
(Digital audio out jack)
digital (optical) audio equipment.
Connect to
h Cooling
fan
Connecting
to the Aerial
Rear of TV
Aerial
SCART INPUT
Remove the aerial cable
from your TV set and
insert it into the aerial socket at the back of the
recorder.
socket
aerial
on
Plug
one
plug
socket
AUDIO INPUT
L
VIDEO
INPUT
R
end of the aerial cable into the TV
the recorder and the other end into the
input
ANTENNA
INPUT
on
R
your TV set.
RF coaxial connection
Connect the RF. OUT
jack on the recorder to the
input jack on the TV using the 75-ohm Coaxial
Cable supplied (R). The RF. OUT jack passes the
signal through from the AERIAL jack.
aerial
Rear of the recorder
10
SCART connection
Connections to Your TV
Make
on
the
When
of the
following connections, depending
capabilities of your existing equipment.
one
using
jacks,
the TV
using
the scart
using
the
set the VIDEO OUTPUT SELECT
Tips
Audio
(Left/Right) Connection
on
AUDIO OUT
connect the recorder. Use
recorder's AUDIO OUT
only
one
of the
using
the audio cables
(record deck)
Please refer to the manuals of your TV, VCR,
System or other devices as necessary to
S-Video connection
directly to the
input channel.
not connect the recorder's AUDIO OUT jack to
phono in jack (record deck) of your audio
sure
the recorder is connected
right
(A). Do
jack to
of your audio
connections described below.
IN
jacks of the
jacks on the TV
not connect the
the
phono
in
jack
system.
Connect the S-VIDEO OUT
the recorder to the
S-Video in
S-Video cable
jack
Caution
Component
the TV
on
jack on
using the
(S).
Video connection
TV. Tune the TV to the correct video
Connect the COMPONENT / PROGRESSIVE SCAN
Do
VIDEO OUT
the
system.
--
right
recorder to the audio left and
on
make the best connections.
--
the TV
your TV and other equipment you
wish to connect, there are various ways you could
Make
on
jack on the recorder to the
using the video cable (V).
jack
Connect the left and
Stereo
--
on
Connect the VIDEO OUT
video in
switch to RGB.
Depending
jacks
Video connection
set the VIDEO OUT
SELECT switch to COMPONENT. When
jack,
jack
in
corresponding
cable (T).
the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT
SCART
Connect the EURO AV1 AUDIO/VIDEO scart
the recorder to the
Do not connect your recorder via your VCR. The
DVD image could be distorted by the copy
protection system.
Rear of TV
S-VIDEO
SCART INPUT
INPUT
VIDEO
INPUT
COMPONENT VIDEO INPUT
Y
Pb
AUDIO INPUT
Pr
jacks on the recorder to the
corresponding input jacks on the TV using
cable (C).
If your television is
an
Y Pb Pr
high-definition or "digital ready"
television,
advantage of the recorder's
progressive scan output for the highest video
resolution possible. If your TV does not accept the
Progressive Scan format, the picture will appear
scrambled if you try Progressive Scan on the recorder.
RH188S/RH199S: Set the [Progressive Scan]
option to [ON] on the setup menu for progressive
signal, see page 18.
RH188HS/RH200MHS: Set the resolution to 576p
using RESOLUTION button for progressive signal.
a
you may take
Note:
S
T
C
V
A
does not work with the
Progressive
scan
connections
(yellow
VIDEO OUT
jack)
or
analog
video
S-VIDEO
connection.
Caution
(RH188S/RH199S only)
setting for Progressive Scan output is
entered, an image will only be visible on a
Progressive Scan compatible TV or monitor. If you set
Progressive Scan to [ON] in error, you must reset the
Once the
recorder.
Rear of the recorder
First,
remove
the disc in the recorder.
Next,
press STOP (x) and hold it for five seconds before
releasing it. The video output will be restored to the
standard
visible
setting,
on a
Caution
and
a
picture will once again be
analog TV or monitor.
conventional
(RH188HS/RH200MHS only)
720p or 1080i,
If the resolution is set to
OUT,
the VIDEO
S-VIDEO OUT and COMPONENT VIDEO OUT
connections
are
not available.
11
HDMI connection
HDMI
TV
compatible
HDMI
(RH188HS/RH200MHS only)
If you have
a
HDMI TV
to this recorder
using
a
monitor, you
HDMI cable.
or
can
connect it
H
1. Connect the HDMI
HDMI
jack
jack on the recorder to the
HDMI compatible TV or monitor
on a
(H).
2. Set the TV's
source
to HDMI
to TV's Owner's
(refer
manual).
Notes:
If your TV is NOT
capable of handling 96 kHz
sampling frequency, set the [Sampling Freq.] option
to [48 kHz] on the setup menu (See page 19).
When this choice is
your system
so
made, this unit will
convert any 96 kHz
automatically
signals
to 48 kHz
to
HDMI
[PCM]
on
the
Dolby Digital and
Digital] and [MPEG]
setup menu (See page 19).
If your TV is not equipped with DTS decoder, set
the [DTS] options to [OFF] on the setup menu (See
page
19).
To
enjoy
DTS multi channel
must connect this recorder to
receiver via
one
a
surround, you
DTS
of this recorder's
compatible
digital audio
the cable connector
arrow on
alignment
should face
body
with the connector
on
Definition Multimedia
Interface) supports
single digital connection for
Players, Set-Top Boxes, and other AV
use
with DVD
on a
devices.
HDMI
developed to provide the technologies of
(High Definition Contents Protection). HDCP is
to protect digital content transmitted and
was
HDCP
used
received.
capability to support standard, enhanced,
high-definition video plus standard to multi-channel
or
up for correct
recorder.
(High
both video and audio
HDMI has the
outputs.
The
About HDMI
decode them.
can
If your TV is not equipped with
MPEG decoder, set the [Dolby
options
Rear of the recorder
the
surround-sound
audio, HDMI features include
uncompressed digital video, a bandwidth of up to 5
gigabytes per second, one connector (instead of several
cables and connectors), and communication between the
AV
source
and AV devices such
as
DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface
HDMI
are
trademarks
licensing
or
registered
trademarks of
LLC.
(Type A)
If there is noise
or
lines
on
the screen,
please
check
the HDMI cable.
Tip
When you connect a HDMI or DVI compatible
device make sure of the followings:
-T ry
:
When you
resolution
Additional Information for HDMI
use
HDMI
connection, you
can
(576i, 576p, 720p, or 1080i)
output using RESOLUTION button.
change
the
for the HDMI
on
-
-
the resolution when the recorder is
connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
on
again.
on
the HDMI/DVI device
seconds, then switch
this recorder.
The connected device's video
correctly
recorder and then turn it
off the HDMI/DVI device and this
Next, switch
and leave it for around 30
Caution
Changing
switching
recorder.
input
is set
for this unit.
The connected device is
compatible with
720(1440)x576i, 720x576p, 1280x720p, or
1920x1080i video input.
Not all
HDCP-compatible
DVI devices will work with
this recorder.
-
The
picture
will not be
non-HDCP device.
12
displayed properly
with
Connecting
to an
Amplifier
Rear of the recorder
Connecting to an amplifier equipped with two
analog stereo or Dolby Pro Logic ll/
Pro Logic
channel
Connect the Left and
Right
AUDIO OUT
jacks on the
jacks on your
system, using the audio
recorder to the audio left and
amplifier, receiver,
(A).
or
stereo
right
in
cables
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
channel
1.
Connect
A
X
O
of the recorder's DIGITAL AUDIO
one
OUT
jacks (OPTICAL O or COAXIAL X) to the
corresponding in jack on your amplifier. Use an
optional digital (optical O or coaxial X) audio cable.
2.
You will need to activate the recorder's
output. (See "Audio Settings"
Digital
A
on
page
digital
19).
AUDIO INPUT
connection
provides
the best
sound
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
Dolby Digital
and the logos
supported by your recorder (MPEG 2,
and DTS). Check the receiver manual
Manufactured under license from
Laboratories.
"Dolby",
D
trademarks
symbol
are
"DTS" and "DTS
Caution:
Digital
Licensing agreement, the digital
DTS digital out when DTS audio
output will be in
Dolby
Logic", and the doubleof Dolby Laboratories.
"Pro
the front of the receiver.
on
Due to the DTS
OPTICAL
DIGITAL INPUT
Amplifier (Receiver)
Multi-channel sound
digital multi-channel
quality. For this
COAXIAL
DIGITAL INPUT
Theater
Digital Out" are
Systems, Inc.
trademarks of
stream is selected.
Notes:
--
If the audio format of the
digital output does not
capabilities of your receiver, the receiver
produce a strong, distorted sound or no sound
match the
will
at all.
--
Six Channel
Digital Surround Sound via digital
only be obtained if your receiver
equipped with a Digital Multi-channel decoder.
connection
--To
see
can
is
the audio format of the current DVD in the
display, press AUDIO.
This recorder does not perform internal
on-screen
--
decoding
of
DTS sound track. To
a
multi channel
surround, you
recorder to
DTS
a
this recorder's
(2 channel)
enjoy DTS
must connect this
compatible receiver
digital audio outputs.
via
one
of
13
Audio/Video
Accessory
TV
(A/V)
VCR, Cable Box, or
Satellite Tuner, etc.
Connections
Connecting
You
can
watch
PAY-TV/Canal Plus Decoder
a
or
record PAY-TV/Canal Plus
programmes if you connect a decoder (not supplied)
to the recorder. Disconnect the recorder's mains lead
from the mains when
To watch
or
connecting
the decoder.
record PAY-TV/Canal Plus programmes,
set
[AV2 Connection] option to [Decoder] (see page
18) and set the program's [Decoder On/Off] option to
[On] on the Setup menu (page 17).
Tip:
You do not need to turn
signals
on
the recorder to view the
from the connected tuner
on
your TV.
Note:
If you disconnect the recorder's mains lead, you will
signals from the connected
Rear of the recorder
not be able to view the
decoder.
Tip:
You do not need to turn
TV
signals
PAY-TV/Canal Plus
Decorder
the recorder to view the
on
your TV.
Notes:
Pictures
prohibit
SCART AV
on
from the connected tuner
containing copy protection signals
copying cannot be recorded.
that
any
If you pass the recorder signals via the VCR, you
may not receive a clear image on your TV screen.
Be sure to connect your VCR to the recorder and
your TV in the order shown below. To watch video
tapes, watch the tapes through a second line input
on
your TV.
Line
VCR
RECORDER
input
1
TV
Line
input
2
When you record to a VCR from this recorder, do
not switch the input source to TV by pressing the
TV/DVD button
Rear of the recorder
Connecting
jack
Connect
a
VCR
to the EURO AV2 DECODER
or
similar
EURO AV2 DECODER
To watch
or
record the
recording device to
jack of this recorder.
source
DECODER
VCR
from EURO AV2
DECODER
14
the remote.
jack.
If you disconnect the recorder's mains lead, you will
not be able to view the signals from the connected
the
jack, set [AV2 Connection] option to
[Others] (see page 18) and set [AV2 Record] option
[Auto], [CVBS] or [RGB] as required (see page 21).
on
If you are using a B Sky B tuner, be sure to connect
the tuner's VCR SCART jack to the EURO AV2
to
or
tuner.
ConnectingtotheAVIN3orAVIN4
Jacks
Connect the
input jacks (AV
IN 3, AV IN
4)
on
the
recorder to the audio/video out
accessory component,
using
jacks on your
audio/video cables.
Connecting
Using
a
tapes
Use
Note:
Digital Camcorder
the front
connect
DV
a
DV
panel DV IN jack, it is possible to
digital camcorder and digitally transfer
to DVD.
DV cable (not supplied) to connect the DV
jack of your DV camcorder to the front panel
jack of this recorder.
a
in/out
If you use the S-VIDEO IN jack on the front panel, the
VIDEO IN jack on the front panel is not available.
IN
DV
Note:
This
Jack
panel of Accessory Component
(VCR, Camcorder, etc.)
only.
jack
is for connection to DV
It is not
compatible
with
digital camcorder
digital satellite tuners
Hokupand Setings
or
D-VHS video decks.
AUDIO
OUTPUT
R
DV
L
Digital
Camcorder
DV
IN/OUT
VIDEO
OUTPUT
S-VIDEO
OUTPUT
Rear of
the recorder
OR
Front of
the recorder
Front of the recorder
15
Using
From the Home Menu
Media for
playback
Press HOME to
1.
screen
and
you
recording
display
can access
the Home Menu
a
main
screen.
option
Operation
1.
Press SETUP and the
2.
Use v / V to select the desired
3.
While the desired item is
move
Setup
menu
appears.
option.
selected, press B
you
Use v / V to select the second desired
Use the v / V and ENTER buttons to select the
5.
Press B to
sub
6.
Use v / V to select the desired
option
options
to
to the second level.
4.
want. Sub
3.
all the
of the recorder.
Use the b / B buttons to select
2.
General
the Home Menu
appears.
you want.
move
option.
to the third level.
setting
then press
ENTER to confirm your selection.
Some items require additional steps.
Press SETUP to exit the
7.
Setup
menu.
Note:
To exit the HOME menu, press HOME.
4.
Press b
TV
TV HDD: Returns to live TV
viewing
for HDD
General
viewing
for DVD
Auto
recording.
TV DVD: Returns to live TV
recording.
Displays the Title List menu for
HDD DivX: Displays the [Movie List]
(page 28)
HDD.
menu
-
-
equipped with a frequency
capable of receiving up to
tuner
(page 43)
channels.
for HDD.
Preparation:
Connect the recorder to the desired
DISC:
as
Displays Title List menu for recordable
Displays [Movie List] menu for DivX
(page 28)
Plays back Video CD or DVD-Video
(page 24-27).
level.
Programming
synthesized
HDD:
previous
Settings
This recorder is
MOVIE
-
to go back to the
disc
shown in
Connecting
88 TV
type of aerial,
to the Aerial
on
page 10.
(page 43)
disc.
disc
PHOTO
(See page 31)
Displays [Photo List] menu for HDD.
DISC: Displays [Photo List] menu for disc.
Memory Card 1/2 (RH200MHS only): Displays
[Photo List] menu for memory card.
HDD:
MUSIC
(See page 29)
Displays [Music List] menu for HDD.
DISC: Displays [Music List] (or Audio CD) menu
HDD:
1.
Select the
2.
Press B to
for
SETUP
(See page 16)
Start: Displays Setup
Initial
In this
3.
4.
menu.
Settings
menu
system, there
customize the
to the third level.
is
highlighted.
Use v / V to select
[Start]
icon is
If your
country is
country then press B.
a
highlighted.
not
listed, select [Others]
Press ENTER to
begin the channel search.
The tuner will automatically cycle through all
available channels in the area and place them
in
the tuner's memory.
are
several ways to
settings provided. Most menus consist
of three levels to set up the options, but some require
greater depth for the variety of settings.
Note:
After you have connected your recorder for the very
first time. If you press SETUP for initial setting, you
can only set the [Auto Programming] option. Then you
can
16
move
[Country] option
disc.
Memory Card 1/2 (RH200MHS only): Displays
[Music List] menu for memory card.
[Auto Programming] option.
set the other
options.
General
Program
You
You
Edit
edit
can
move,
Program
Settings (Continued)
a
channel
manually (add, delete,
name,
etc.).
Select
2.
Press ENTER while
[Program Edit] option
Program
perform a search to select and store TV
manually.
When you select [Program Edit] in step 4 above,
display for setting channels appears.
can
channels
1.
The
Edit
List
[Edit]
menu
the
1.Useb/Btoselecttheitemandpressv/Vto
change the setting.
then press B.
is selected.
appears.
[PR]
indicates the selected programme
Hokupand Setings
position.
[Seek] Searches for a channel automatically.
Searching stops when the recorder tunes in a
channel.
[Ch.] Changes
3.
Use v / V to select
[MFT] Fine
picture.
PR number then press
a
ENTER.
4.
Use v / V to select the program
ENTER.
option
then press
Names
see page 47.
be up to 5 characters long.
Sorts the programme positions
List. Press v / V to
move
the
the selected
Sets the channels for the
decoder. You need this
setting
to watch
or
record PAY-TV/Canal Plus programmes.
Press ENTER so [Decoder] appears on the
Press ENTER
display.
setting.
[NICAM Auto/off]
display.
is not
again
clearer
encoded video
1.
jack
for
inputting
signals.
Press AV/INPUT while the
Program
List
menu
appears.
Press ENTER
[Canal+] appears on the display.
again to turn off the setting.
Off: Inputs the signals from the EURO AV1
AUDIO/VIDEO jack. Normally select this.
On: The encoded video signal input from the
EURO AV1 AUDIO/VIDEO jack is output to the
EURO AV2 DECODER jack for decoding.
The decoded signal is then input back through
the EURO AV2 DECODER jack so you can
so
Press ENTER
record
or
view PAY-TV/Canal Plus programmes.
to turn off the
Sets the channels for the
NICAM broadcast.
the
Sets the EURO AV1 AUDIO/VIDEO
2.
on
programme position to a new location.
[Delete] Disables a programme position you do
not need.
[Decoder On/Off]
a
2. Choose OK then press ENTER to confirm the
setting and returns to the Program List menu.
characters,
can
[Move]
Program
tunes the channel to obtain
AV1 Decoder
[Program Edit] Sets the channel manually. See
"Program Edit" on the right.
[Station Rename] Changes the station name.
The display for entering characters appears.
To enter
the channel number.
is lit
Normally, [NICAM]
on
If the sound from NICAM broadcast
clear, press ENTER
so
[NICAM]
disappears.
5.
Press RETURN
List
(O) repeatedly
to exit
Program
menu.
17
General
Progressive Scan (RH188S/RH199S only)
Settings (Continued)
Auto Clock Set
When Channel auto search is
Time and Date
also set
are
the recorder
completed the actual
automatically. If the time
in
is not correct, the clock must be
set
display
manually.
1.
Select
2.
Use v / V to select
[Clock set] option
then press B.
then press
[Auto] option
ENTER.
Note:
There
are cases
where the TV station does not
send,
sends wrong date and/or time information and the
recorder sets the incorrect time.
or
If this happens,
manually.
we
recommend that you set the clock
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the
recorder to a standard (analog) television, set
Progressive Scan to [OFF].
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks for connection to a TV or
monitor that is compatible with a progressive scan
signal, set Progressive Scan to [ON].
Note:
Progressive
Scan will be disable in the
when the VIDEO OUT SELECT switch
panel
is set to RGB
setup
on
menu
the
rear
position.
Caution
Once the
setting for Progressive Scan output is
image will only be visible on a
Progressive Scan compatible TV or monitor. If you set
Progressive Scan to [ON] in error, you must reset the
entered,
Manual Clock Set
1.
Select
2.
Use v / V to select
[Clock set] option
then press B.
[Manual] option
recorder.
then press
ENTER.
Enter the necessary information for date and time.
(left/right): Moves the cursor to the previous
3.
b / B
next column.
or
v / V
the
setting
Press ENTER to confirm your
setting.
(up/down): Changes
cursor position.
at the
First,
remove
the disc in the recorder.
standard
visible
setting,
on a
and
a
picture will once again be
analog TV or monitor.
conventional
You
can
connect
a
decoder
or
EURO AV2 DECODER socket
TV
Selects the
aspect ratio of the connected TV (4:3
wide).
TV. When you select
below.
[16:9]
Select this when
TV with
a
or
to
connecting
a
similar
wide-screen
Power Save Mode
You
when
[4:3]
the upper and lower
a
a
wide
picture
[TV Aspect].
wide
portions
picture
of the
[Pan Scan] Automatically displays
screen
set up the unit into
Nothing
is
displayed
an
economic power save
display window
in the
when the unit is turned off.
display
[Letter Box] Displays
not fit.
can
mode.
is selected in
the entire
recording
and cuts off the
a
on
the
screen
[OFF]
[ON]
with bands
portions
Power Save Mode is active.
on
Notes:
screen.
wide
Power Save Mode is not active.
picture
that do
on
The encoded television
PREMIERE)
are
signals (CANAL+
or
not decoded in the Power Save
Mode.
The Power Save Mode is not available in the
standby
mode for the timer
recording
and when
power off of the unit after receiving the encoded
television signals (CANAL+ or PREMIERE).
18
or
device.
wide mode function.
Mode
Selects how to
Canal Plus decoder.
Select [Others] if you connect the
recorder's EURO AV2 DECODER jack to a VCR
connecting to a 4:3 screen
[4:3], set [Display Mode]
TV
Display
the back.
[Others]
Select this when
or
on
Select [Decoder] if you connect the
recorder's EURO AV2 DECODER jack to a PAY-TV
standard
[4:3]
other device to the
[Decoder]
Aspect
or
Next,
press STOP (x) and hold it for five seconds before
releasing it. The video output will be restored to the
AV2 Connection
current
4.
an
General
Settings (Continued)
Audio
Settings
Each DVD disc has
Initialization
variety of audio output options.
Output according to the type
a
Set the recorder's Audio
You
can reset the recorder to its original factory
settings and initialize the HDD or Memory Card.
[Factory Set] If you need to, you can reset the
recorder to all its factory settings. Some options
cannot be reset. (Rating, Password, and Area
Code)
[HDD format] Initializes
everything recorded on
the HDD
(Hard
Disk
of audio
system you
use.
Drive):
Hokupand Setings
the HDD will be erased.
[M/C format] (RH200MHS only) Initializes the M/C
(Memory Card): everything recorded on the Memory
Card will be erased.
1.
Select
2.
Press v / V to select the desired
3.
[Initialize] option
Dolby Digital
then press B.
option
then press
[Bitstream]:
/ DTS / MPEG
Select "Bitstream" if you connect the
ENTER.
recorder's DIGITAL AUDIO OUT
The confirm message will appear.
or
Use b / B to select
MPEG decoder.
[Yes]
or
[No]
then press
ENTER.
other
with
equipment
Language Settings
a
an
amplifier
DTS
or
/
two-channel
DVDs encoded in
automatically
jack to
Dolby Digital,
MPEG): Select when
digital stereo amplifier.
Dolby Digital or MPEG will be
[PCM] (for Dolby Digital
connected to
a
downmixed to two-channel PCM
audio.
[Off] (for DTS): If you select "Off", the DTS signal is
not output through the DIGITAL AUDIO OUT jack.
Sampling Frequency
If your receiver or amplifier is NOT capable of
96 kHz signals, select [48 kHz]. When this
handling
choice is
96 kHz
Select
a
them.
Menu
Display
language
made, this unit will automatically convert any
to 48 kHz so your system can decode
signals
for the
Setup
menu
and
on-screen
display.
If your receiver
or
96 kHz
select
amplifier is capable of handling
[96 kHz]. When this choice is
made, this unit will pass each type of signal through
without any further processing.
signals,
Disc Menu/Audio/Subtitle
[Original]Refers
the disc
was
to the
original language
in which
recorded.
language, press number
corresponding
4-digit number according to the language code list
in the reference chapter (see page 55). If you enter
the wrong language code, press CLEAR.
[Other]
To select another
buttons then ENTER to enter the
[Off](for
Disc
Subtitle)
:
Turn off Subtitle.
DRC
(Dynamic Range Control)
With the DVD
format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen
without
losing clarity
to
a
movie at
a
lower volume
of sound. Set DRC to
[ON]
for
this effect.
Vocal
Set Vocal to
DVD is
[ON] only when a multi-channel karaoke
playing. The karaoke channels on the disc will
mix into normal stereo sound.
19
Lock
(Parental Control) Settings
Set Password
1.
Select
2.
Follow
[Set Password] option
2
then press B.
shown
"Rating".
password, select the [Change],
press ENTER and input the new 4-digit code then
press ENTER. Input it again to verify.
To delete the password, select [Delete] then press
To
step
change
as
the
ENTER.
If you forget your 4-digit code
If you forget your password, to clear the current
password,
1.
Rating
Blocks
playback
1.
Select
2.
To
of rated DVDs based
the
on
their
3. Select
[Yes]
password is
then press B.
Rating, Password and Area Code
input the 4-digit security code
code you
code and
Select
a
rating using
"Area
the v / V buttons.
[8]: Rating one (1) has the
rating eight (8) is the least
most restrictions
selection.
[Area Code] option
2.
Follow
step
3.
Select the first character
Shift the
5.
available
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
the disc.
2
as
shown
then press B.
"Rating".
the v / V
using
cursor
using B buttons and select
using v / V buttons.
Press ENTER to confirm your
DivX
rating for the recorder, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
same
(See
Codes", page 55.).
Select
Registration
We
Note:
scenes
used
were
to the list
the
second character
If you select [No Limit], parental control
is not active and the disc plays in full.
If you set
the same
whose standards
disc, referring
1.
4.
restrictive.
rating
6-digit
buttons.
[No Limit]:
Press ENTER to confirm your
an area
to rate the DVD video
ENTER, press CLEAR.
4.
1 level icon.
then press ENTER. The 4-digit
cleared. Enter a new code.
Enter the code of
security
a 4-digit
press ENTER. Enter it again and press ENTER to
verify. If you make a mistake before pressing
-
an
Area Code
must
you created.
If you have not yet entered a
are prompted to do so. Input
and
below.
then select
number "210499".
rated.
are
[Rating] option
access
features, you
[1]
Display Setup
procedure
menu
2. Use the Number buttons to enter the
content. Not all discs
3.
follow the
is
Code
area
code selection.
DivX
VOD (Video On Demand)
you the DivX
code that allows you to rent and purchase
provide
registration
videos using
the DivX
VOD service. For
more
information, visit www.divx.com/vod.
1.
Select
2.
Press ENTER while
[DivX Reg. Code] option
registration
3.
Use the
[View]
then press B.
is selected and the
code will appear.
registration
videos from Divx
code to
purchase
or
rent the
VOD service at
www.divx.com/vod. Follow the instructions and
download the video onto
a
disc for
playback
on
this unit.
Note:
All the downloaded videos from DivX
be
20
played
back
on
this unit.
VOD
can
only
MPEG4
Recording Settings
When HDD
you can set the video recording
MPEG4. If you want to record a
recording,
format to MPEG2
or
video with MPEG4
format, select [ON]. When this
made, this unit will record the video with
choice is
MPEG4 format
the HDD.
on
[OFF] For MPEG2 recording in HDD mode
[ON] For MPEG4 recording in HDD mode
AV2
You
Record Mode Set
You
XP
LP
recording,
aspect ratio
to suit the material
or
[Auto]
you
can
The video
input signal
will
automatically
follow
signal received.
[CVBS] Only for recording CVBS input signal.
[RGB] Only for recording RGB input signal.
set the
recording
you're recording (16:9
4:3).
DV
Hokupand Setings
type of the signal when recording
from the device connected to the
the video
Aspect
When DVD
select the
input signal
EURO AV2 DECODER socket.
set the
Record
can
video
picture quality for recording;
(High Quality), SP (Standard Quality),
(Low Quality), EP (Extend Quality).
can
Recording
Disc
Settings
Disc Format
Recording
If you load a completely blank
initialize the disc.
Audio
disc, the recorder will
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV
DVD-R: The recorder initialize the disc to Video
IN
mode.
jack.
Some digital
mode. The
camcorders have two stereo tracks for
audio. One is recorded at the time of
shooting;
shooting.
other is for
overdubbing after
setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is
always
be Video
DVD-RW/DVD+RW/DVD+R(DL)/DVD-RAM: The
Initialize menu will appears. Select [OK] then press
the
On the Audio 1
mode will
recording
ENTER. DVD-RW disc is initialized to Video mode.
Also, you
can
reformat the DVD-RW/DVD+RW/
DVD-RAM from the
Setup
menu as
below.
used.
TV
Recording
When TV
Audio
recording
with
bilingual,
you
can
choose
audio channel to record.
[Main+Sub] Main language
[Main] Main language only
[Sub] Sub language only
Auto
When
language
Chapter
recording in Video mode, chapter
specified setting. You can change
put in
minutes,
5
and Sub
Select
Press ENTER while
this interval to
3.
with the
or
menu
[Start]
is selected.
appears.
Use b / B to select
Video
then press B.
[Disc Format] option
Format Disc
are
15 minutes. If you select
switch off automatic chapter marking
[None],
altogether
10 minutes
markers
1.
2.
a
desired mode
(VR
Mode
or
then press ENTER.
Confirm message will appear.
[None] setting.
For
4.
Mode)
DVD+RWs, go
to
step
4.
Use b / B to select
It takes
a
[OK] then press ENTER.
few moments to initialize the disc.
Caution
If you want to change the disc format,
recorded on the disc will be erased.
everything
21
Disc
Disc Label
Settings (Continued)
Use this to enter
Finalize
recordings in place so that the
disc can be played on a regular DVD player or
computer equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. This is accessed by pressing
Finalizing
'fixes' the
MENU/LIST
The disc
only
see
DVD-RW disc
record and edit
display
be up to 32 characters long.
on a different recorder, you will
limited character set.
a
1.
Select
2.
Press ENTER while
[Disc Label] option
To enter
Once you have finalized a DVD-R and DVD+R disc,
you cannot edit or record anything else on that disc
can
name
name can
Keyboard
Caution
except DVD+RW. However, you
for the disc. This
For discs formatted
TITLE.
or
a name
appears when you load the disc and when you
disc information on-screen.
a
by choosing [Unfinalize] option.
menu
[Edit]
then press B.
is selected.
appears.
characters,
see
page 47.
Disc Protect
When
recording
in DVD-RAM / DVD+RW / +R disc
VR mode formatted DVD-RW
disc,
prevent accidental recording, editing
or
[ON] to
deleting of
or
set to
the
disc loaded. If you need to unlock the disc to make
edits, select [OFF].
PBC
PBC stands for
menus
some
Select
2.
Press ENTER while
[Finalize] option
Finalize
Select
then press B.
menu
[Finalize]
is selected.
appears.
[OK]
Note:
How
long
finalization takes
number of titles
on
DVD+R DL disc
can
on the type of
disc, and the
depends
disc, how much is recorded
on
the
the disc.
take up to 30 minutes to
finalize.
Tips
If you load
a
finalized, you
DVD-RW that has
can
Unfinalize from the Finalize
you
can
edit and re-record onto the disc.
You cannot unfinalize
If
[Disc Protect] option
not available. To
[OFF].
22
already been
by choosing
menu. After doing this,
'Unfinalize' it
a
DVD-R and DVD+R disc.
is set to
finalize,
set
[ON], the finalize is
[Disc Protect] option to
Video CDs
are
played according
to the
PBC, if
available.
[OFF]
CDs.
then press ENTER.
The recorder starts finalizing the disc.
3.
Playback Control and refers to special
navigation features that are available on
Video CDs.
[ON]
1.
and
Video CDs
are
played
the
same
way
as
Audio
General
Explanation
On-Screen Display
This manual
of
Displaying
You
loaded
operating the
require specific operation or
allow only limited operation during playback. When
this occurs, the symbol
appears on the TV screen,
indicating that the operation is not permitted by the
gives
basic instructions for
recorder. Some DVDs
recorder
or
is not available
Displaying
on
the disc.
Information While
can
Watching
1.
2.
display
Press DISPLAY
once
to show current status.
Press DISPLAY
once
again
to show various
information.
The items
During viewing the TV, press ENTER or DISPLAY
to display/remove the information displayed
on-screen
various information about the disc
on-screen.
playback
TV
Disc Information
displayed differ depending
playing status.
type
or
You
can
on
Hokupand Setings
the disc
on-screen.
Indicates channel
audio
number, station
signal (STEREO, MONO)
name, and
received by
the tuner.
Indicates the record
mode,
free space, and elapsed
time progress bar.
Indicates disc
name
and format.
3.
change
select
or
an
item
select the
by pressing v / V and
setting by pressing b / B.
For details about each
item,
see
the pages in
parentheses.
(or track) number/total
(or tracks) (page 24, 26)
[Chapter]: Current chapter number/total number
of chapters (page 24)
[Time]: Elapsed playing time (page 26)
[Audio]: Selected audio language (DVD VIDEO
only) or audio channel (page 25)
[Subtitle]: Selected subtitle (page 25)
[Angle]: Selected angle/total number of angles
(page 26)
[Sound]: Selected sound mode (page 27)
[Title]:
Current title
number of titles
Indicates current date and time.
Note:
If
button is
pressed
display disappears.
no
for 10
seconds, the
on-screen
23
Playback
General
Features
Playback
Load your chosen disc in the
tray, with the playback side down.
2.
Starts
menu
3.
To
1.
playback using
the
HOME
(see
page
16).
press STOP
playback,
(x).
stopped point, depending on the disc. "Xx" appears
Press PLAY (N) to resume playback (from the scene point). If you press
("x" appears on the screen.), the unit will clear the stopped point.
stop
The unit records the
4.
Press OPEN/CLOSE
Press OPEN/CLOSE
(Z)
(Z)
to
on
the
STOP
screen briefly.
(x) again or unload
the disc
the disc.
remove
to close disc
tray
or
press POWER
(1),
the disc
tray closes automatically and unit
turns off.
Note:
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
(see "Rating", on page 20).
entered and/or the disc must be authorized
Buttons
Operations
OPEN / CLOSE
PAUSE/STEP
(Z)
(X)
Opens
All Discs
tray.
press PAUSE/STEP
During playback,
playback.
Press PAUSE/STEP
(X) repeatedly
to
(X)
All Discs
to pause
play Frame-by-Frame.
Tip:
You
advance
back up the
picture frame-by-frame by
pressing
repeatedly during PAUSE mode.
The picture frame-by-frame in reverse is not available for
can
or
b / B
Video CD.
SKIP
(.
/
>)
During playback, press SKIP (. or >) to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
Press SKIP . twice briefly to step back to the previous
chapter/track.
Tips:
To go directly to any chapter during DVD playback, press
DISPLAY twice and press v / V to select the chapter
icon.
On
Then, input the chapter number or use
Audio CD, to go directly to any track,
an
track number
using
the numbered buttons
b / B.
enter the
(0-9) during
playback.
SCAN
(m
/
M)
During playback, press SCAN (m
required scan speed.
or
M) repeatedly
to
select the
HDD, DVD; 5 steps
DivX; 4 steps
Video CD, Audio CD;
While the
3
steps
is
playback
paused, press
repeatedly to play in slow motion.
SCAN
(m
or
M)
HDD, DVD; 4 steps
CD; 3 steps (Forward only)
Video
ZOOM
During playback or pause mode, press ZOOM to enlarge
image.
x2 size
x4 size
x1 size (normal size)
(x1 size
You can move through the zoomed picture using bBvV
the video
→
buttons.
24
4-digit
Discs
closes the disc
or
the
→
→
code must be
General
Features
Playback
Buttons
(Continued)
Operations
REPEAT
Discs
During playback,
desired
HDD
press REPEAT
repeatedly
to select
a
repeat mode.
DVD
(Title/Off),
(Chapter/Title/Off)
(Chapter/Title/All/Off)
Video CD, Audio CD (Track/All/Off)
MP3/WMA (Track/Folder/Off)
VR mode DVD-RW
Notes:
On
Video CD with
must set PBC to [OFF] in
Repeat function. See page 22.
If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
a
Setup
A-B
to
menu
use
PBC, you
the
the
During playback, each press of A-B button to select point A
point B and repeats a sequence from point A (Starting
point) to point B (End point).
and
Note:
HDD
During
playback,
you cannot select
sequence less
a
than 5 seconds.
TITLE
If the current DVD title has
on
MENU/LIST
SUBTITLE
AUDIO
(
the
The disc
(
)
)
a
menu, the title
Otherwise, the disc
screen.
menu
on
appears
the
menu
menu
appears
may appears.
screen.
During playback, press SUBTITLE then press b
repeatedly to select a desired subtitle language.
/ B
Press AUDIO then press b / B repeatedly to hear
language or audio track.
a
different audio
Note:
Some discs feature both
soundtracks. There is
no
Dolby Digital and DTS
analog audio output when
selected. To listen to the DTS
recorder to
a
soundtrack,
DTS decoder via
one
of the
DTS is
connect this
digital outputs.
See page 13 for connection details.
Press AUDIO then press b / B repeatedly during playback
a different audio channel (STEREO, LEFT or
to hear
RIGHT).
With DVD-RW discs recorded in VR mode and HDD that
have both
a
main and
switch among Main
Press AUDIO
audio channel
I.SKIP
Press I.SKIP
a
(L),
Bilingual audio channel, you
(R), or Main+sub (L+R).
can
Sub
repeatedly during playback to
(STEREO, LEFT or RIGHT).
repeatedly during playback
to
hear
skip
a
different
forward
15 seconds.
In HDD
skips
playback
forward
or
Timeshift
or reverse
mode, each press
b / B
5 minutes.
25
If
is
The
displayed
DVD
VCD
may be displayed first after
Video CD which contains a menu.
loading
a menu screen
menu screen
DVD
or
Marker Search
a
HDD
-RW VR
+R
DVD
DVD
To enter
Usetheb/B/v/Vbuttonstoselectthe
Press TITLE
view, then press ENTER
want to
title/chapter you
start playback.
MENU/LIST to return to the
or
You
to
menu
RAM
+RW
-R
VCD
Marker
a
start
can
playback
To enter
points.
screen.
-RW Video
desired
point
the TV
screen
from up to six memorized
at the
marker, press MARKER
a
the disc. The Marker icon appears
to enter up to six
on
on
briefly. Repeat
markers.
VCD
Use the number buttons to select the track you want
to view.
Press RETURN
to return to the
(O)
To Recall
or
1.
During
disc
search
menu
menu screen.
Menu
for
setting and the exact operating procedures
using the menu may differ depending on the
Clear
disc. Follow the instructions
Setup
the each
on
You may also set PBC to
screen.
(see
menu
page
[OFF]
2.
menu
3.
under
22).
-RW Video
RAM
+RW
HDD
-R
playback,
appears
press SEARCH. The marker
on the screen.
Useb/B/v/Vtoselectamarkedscenethat
or
Press ENTER and
marked
to another TITLE
Marked Scene
you want to recall
scene
Moving
a
clear.
playback
starts from the
Or, press CLEAR and the marked
scene.
is erased from the marker search
menu.
-RW VR
+R
DVD
DivX
When
disc has
a
another title
more
than
one
Press DISPLAY twice
during playback
v / V to select the title icon.
appropriate
select
a
can move
to
then
use
press the
or b / B to
Then,
numbered button
(0-9)
title number.
Time Search
+RW
title, you
follows:
as
-R
HDD
+R
-RW VR
DVD
-RW Video
RAM
Camera
DivX
Angle
DVD
If the disc contains
To start
1.
2.
playing
at any chosen time
on
the disc:
recorded at different
Press DISPLAY twice
search box shows
1.
during playback. The time
the elapsed playing time.
Press v / V to select the time clock icon
and "0:00:00" appears.
3.
scenes
angles, you can change
angle during playback.
camera
Input
the
required
Display
2.
start time in
seconds from left to
hours, minutes, and
right.
3.
If you enter the wrong numbers, press b / B to
move the under bar (_) to the wrong number. Then
Press DISPLAY
appears
to
a
during playback.
on
the TV
different
camera
The On-Screen
screen.
Usev/VtoselecttheAngleiconintheOnScreen Display.
Use b / B to select
a
desired
The number of the current
TV
angle.
angle appears
on
the
screen.
enter the correct numbers.
4.
Press ENTER to confirm.
selected time.
Playback
starts from the
Tip:
The ANGLE indicator will blink
scenes
recorded at different
angle switching
26
is
possible.
on
the TV
angles
screen
at
to indicate that
3D Surround
-R
+R
This unit
can
-RW VR
DVD
produce
-RW Video
VCD
a
RAM
3D Surround
from two
playback
speakers, instead of the
speakers normally required to listen to
1.
Press DISPLAY
Display
2.
home theater
the TV
Picture)
+RW
HDD
-R
-RW VR
+R
DVD
This function enables you to view the stored stations
in sub picture during playback.
or
multi-
system.
during playback.
on
RAM
The On-Screen
screen.
Usev/VtoselecttheSoundiconintheOnScreen
3.
appears
a
five
in
(Picture
VCD
effect, which
conventional stereo
more
PIP
-RW Video
simulates multi-channel audio
channel audio from
+RW
DivX
Display.
Useb/Btoselect"3DSUR".
To turn off the 3D Surround
effect, select
"NORMAL".
Last Condition
Memory
This recorder memorizes the
DVD
user
settings
for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the recorder or
switch off the recorder. If you load a disc that had its
settings memorized, the latest stop position is
automatically
recalled.
Notes:
--
--
stored in memory for use any time.
This recorder does not memorize settings of a disc
Settings
are
if you switch off the recorder before
it.
play
commencing
to
Playbck
On and off
Press PIP to switch
button
Input
again
on
the sub
picture,
press this
to switch it off.
mode selection for sub
picture
Press AV/INPUT to select the input mode for the
sub picture. Each time this button is pressed, each
input mode for the sub picture is displayed as
shown below.
Tuner→AV1→AV2→AV3→AV4
Program
selection for sub
picture
(+/-) to change the program when sub
picture's input is set to tuner. The selected program
number is displayed on the TV screen. You can
view the selected program by pressing STOP (x).
Use PR/CH
Sub
picture position change
repeatedly until desired position is
achieved. The sub picture moves clockwise or
Press b / B
counterclockwise.
Zoom Sub
picture
repeatedly to enlarge the sub picture,
magnification level increases up to three steps.
Press ZOOM
the
27
Movie List
DivX Movie File
Playing
a
The recorder
can
play DivX files.
file requirement"
files, read "DivX
Before
on
playing
right.
DivX
1.
Note for model RH200MHS:
This recorder cannot
Memory
play
back the DivX
file(s)
2.
1.
Press HOME then select
2.
Select
a
press ENTER.
The [Movie List]
menu
appears
on
file(s)
Press v / V to select a folder/file on the [Movie
List] menu then press ENTER.
[Movie List] menu options appear.
The menu options displayed differ depending on
Pressv/V/b/Btoselectanoption,andpress
ENTER.
[MOVIE] option.
media that contains DivX
[Play] Start playback the
[Open] Opens the folder
then
the TV
options
the selected media.
in the
Card.
menu
folder appears.
[Delete] Deletes the
screen.
selected title.
and
file(s)
or
list of files in the
a
from the
folder(s)
media.
[Rename] Edits the file name. (page 33)
[Move] Moves the file(s) to another folder
media. (page 34)
[Copy] Copies the file(s) to another folder
media. (page 34)
3.
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons
on
the remote to
and
highlight
press ENTER.
4.
If you want to view a particular
highlight a file and press PLAY
file, press
You
functions. Refer to
variable
can use
playback
v / V to
(N).
pages 24-27.
5.
stop the playback. The [Movie List]
appears.
Notice for
displaying
the DivX subtitle
display properly, please
follow
steps below.
1.
Press PAUSE/STEP when the subtitle appears.
2.
Press and hold SUBTITLE about 3 seconds.
The
3.
language
4.
code will appear.
Press b / B to select another
the subtitle is
Press PLAY
requirement
Available resolution size: 720x576
DivX file extensions:
".avi",
(W
x
H) pixel
".divx"
Playable DivX subtitle: ".smi", ".srt",
(Micro DVD format only)",
".txt (Micro DVD format only)"
Playable Codec format: "DIV3", "MP43", "DIVX",
".sub
language
displayed properly.
(N)
Playable
"MP3",
If the subtitle does not
the
or
"XVID", "DX50"
Press STOP to
menu
DivX file
or
to continue
playback.
Audio format:
Sampling frequency:
48 kHz (MP3),
within 8
-
within 32
48kHz
-
(WMA)
Bit rate:
within 8
-
320kbps (MP3),
within 32
-
192kbps (WMA)
CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660
(UDF Bridge format)
(total number
Maximum Files/Disc: Less than 1999
of files and
code until
"AC3", "PCM", "MP2",
"WMA"
Notes
folders)
DivX format
on
If the number of the
frames per
screen
frame is
second, this unit may
not
over
29.97
operate
normally.
If the video and audio structure of recorded file is
not
interleaved,
returns to the
If the file is recorded with
only 1-point
*
menu screen.
GMC, the unit supports
of the record level.
GMC?
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
MPEG4 standard. Some MPEG4
DivX
or
There
are
usually
28
encoders, like
Xvid, have this option.
different levels of GMC
called
1-point, 2-point,
or
encoding,
3-point GMC.
Playing
Audio CD
an
or
MP3/WMA
file
1.
The recorder
play
playing MP3/WMA files,
requirement" on right.
read "MP3/WMA audio
The HOME
2.
2.
3.
menu
[MUSIC] option.
Select
a
menu
The
menu
The
menu
media that contains MP3/WMA
options appear.
options displayed
Start
on
or
the TV
[Random]
audio
Start
screen.
You
a
track then press PLAY
(N).
variable
playback
functions. Refer to
pages 24-27.
1.
Press DISPLAY to view
ID3-Tag
the MP3 file. If
information is not
ID3-Tag
information for
present, [ID3-Tag: None] will appear. If you
select a folder, the number of subfolders and
number of MP3/WMA files in the folder
Press DISPLAY
information
again
to
remove
list of files in the
a
file(s)
Moves the
media.
(page 34)
from the media.
(page 33)
name.
file(s)
to another folder
or
[Copy] Copies the file(s)
media. (page 34)
to another folder
or
Adds the
to
track(s)
Playbck
List.
Program
use
at any
stop playback
time, press STOP.
Press v / V to select
menu
options
file then press ENTER.
a
appear.
Press v / V to select
then press
[Random] option
ENTER.
The unit
automatically begins
and "RANDOM" appears
3.
to the upper
directory,
and press ENTER.
highlight
You also display HOME menu to select another
media by pressing HOME.
move
2.
the
the v / V to
To
on
stop random playback.
Edits the file
[Move]
The
are
screen.
If you want to
5.
depending
Random
Tips:
displayed.
or
the folder and
Deletes the
[Program Add]
(page 30)
starts.
can use
differ
folder appears
[Rename]
Playback
the Audio CD
the selected title.
playback
[Open] Opens
[Delete]
Use v/V to select
on
Pressv/V/b/Btoselectanoption,andpress
[Play]
title then press ENTER.
The [Music List] menu appears
4.
folder/file
a
then press ENTER.
ENTER.
appears.
Select
Music
options
menu
the selected media.
Press HOME.
1.
Press v / V to select
or
audio CDs and MP3/WMA files.
can
Before
file
Audio CD and Music
To return to normal
option again
on
random
the
playback,
playback
menu screen.
select
[Random]
then press ENTER.
Tip:
during
Random
playback,
unit selects another track and
resumes
Random
By pressing
SKIP >
the
playback.
Tip:
You
on
can
create
new
the Music-HDD
folder. Select
or
[New Album] option
Music-Memory Card* menu
1
then press ENTER. "NONAME##" folder is created.
*1
The RH188S/RH188HS/RH199S do not have
memory card slots.
MP3/WMA audio file
requirement
File extensions
".mp3",
".wma".
Sampling frequency:
within 8 48 kHz (MP3),
-
within 32
48kHz
-
(WMA)
Bit rate:
within 8
-
320kbps (MP3),
within 32
-
192kbps (WMA)
CD-R Format:
ISO 9660 and JOLIET.
DVD±R/RW Format:
ISO 9660
(UDF Bridge format)
Maximum Files/Disc:
Less than 1999
(total
number of files and
folders)
29
with Audio
Program Playback
CD and MP3/WMA file
1.
contain up to 99 Audio CD tracks
MP3/WMA files.
Use v / V to select
a
Audio CD
menu.
1.
You
can
Music
or
track/file
menu
cancel the
by pressing
(or folder)
on
2.
The
files/tracks
Repeat step
(folders).
or
(folders)
2.
options
the left side of the
List
menu.
[Program Add] option
[Save]
If you select a folder for Programmed Playback, all
tracks/files in the folder are added to the Program List.
Program
a
(N)
Playback stops
after
playing
the last
programmed
Select
the
(HDD only)
Program
List
options appears
then press ENTER.
menu
[Delete] option
Track Order in the
Program
List
Select the track you wish to move on the Program
List. Use MARKER button to select multiple tracks.
2.
Press ENTER. The
3.
Select
4.
Use v / V to
track in the program list.
options appears
then press ENTER.
the yellow bar to the desired
menu
[Move] option
move
location, then press ENTER.
To exit
8.
Program Playback and resume normal
playback, select a track on the List and press
PLAY (N).
Save Your
you have
can access or remove
pressing
the
Program
List
screen
Program
List
(HDD only)
This recorder memorizes the
Tip:
You
by
1.
Select
The
MENU/LIST.
2.
user
program list that
programmed.
a
track
menu
on
the
options
Select
The
Program
List.
appear.
[Save] option then press ENTER.
Program List is saved in the HDD's
PROGRAM folder.
30
change
tracks.
3.
1.
to start.
to
Tracks
Track from the
Press ENTER. The
Use v / V to select the track you want to start
Press PLAY
track(s)
Memorizes the program list.
2.
Changing
playing.
Program
Select the track you wish to erase from the
Program List. Use MARKER button to select
list.
programmed track you selected last is
highlighted on the program list.
from the
Repeat mode.
[TRACK] Repeats the current track.
[ALL] Repeats all tracks on the Program List.
[OFF] Cancels Repeat mode (no display).
multiple
to the
track(s)
Press REPEAT to select the desired
1.
move
Moves the
Repeat Programmed
Erasing
The
stop random playback.
or
program order.
1-3 to mark additional tracks.
Note:
Use B to
then press ENTER
menu.
[Move]
then
Start
Deletes the
[Delete]
on
option
an
[Play] Playback begins in the order in which you
programmed the tracks from the selected track.
folder.
[Random]
appear
Repeat steps
Use v / V to select
to confirm your selection.
press ENTER.
7.
Program
on
1 to mark additional file/track
Use v / V to select the
6.
the
CLEAR button. To
Press ENTER.
5.
on
Press MARKER.
marked file/track
4.
track/file
the
A check mark appears on the file/track or
folder. Press MARKER again to cancel the
3.
a
selections, press CLEAR again.
Selecting multiple
2.
Press v / V to select
256
select all MP3/WMA files and folders
the Music
1.
or
options
menu
List then press ENTER.
The menu options appear.
Program Playback enables you to make custom
playlists of Audio CD or MP3/WMA tracks. Programs
can
List
Program
a
The recorder
can
JPEG
Photo List
JPEG File
Viewing
JPEG files. Before
play
recordings,
read "Photo file
playing
requirement" on
1.
menu
Press HOME.
The HOME
file
a
the
[Photo List]
differ
depending
on
then press ENTER.
The
menu
The
menu
options appear.
options displayed
on
the selected media.
menu
You
appears.
2.
Select
[PHOTO] option.
3.
Select
a
can
select all files and folders
pressing
[Photo List]
appears
on
the TV
1.
screen.
menu
by
selections,
again.
Selecting multiple
menu
the
on
CLEAR button. To cancel the
press CLEAR
media that contains JPEG file then press
ENTER.
The
options
Press v / V to select
1.
right.
menu
files
(folders)
Press MARKER.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
or
2.
folder.
Repeat step
1 to mark additional file
Use v / V to select
2.
an
option
(folders).
then press ENTER
to confirm your selection.
[Open] Opens
the folder and
a
Playbck
list of files in the
folder appears
4.
Useb/B/v/Vtoselectafile,thenpress
[Full Screen]
ENTER.
The
menu
options
appear
on
the left side of the
[Slide Show] Displays
Tips:
If you want to
move
to the upper
v / V to
directory,
use
the
[Full Screen]
[Copy] Copies the file(s)
media. (page 34)
then press
ENTER.
The selected
image
is
displayed
name.
full
in full
screen.
upon the size and number of JPEG
a long time for the recorder to
files, it could take
read the files.
menu.
(page 33)
[Move] Moves the file(s) to another
(album) or media. (page 34)
and press ENTER.
HOME menu to select another
Use v / V to select
Slide Show
Edits the file
[Rename]
highlight
You can also display
media by pressing HOME.
Depending
as
Deletes the selected file from the media.
[Delete]
menu.
5.
Shows the selected file
screen.
folder
to another folder
or
Tip:
You
create
can
Card* 1
.
Select
new
folder in the HDD
[New Album] option
or
Memory
then press ENTER.
"NONAME##" folder is created.
*1
The RH188S/RH188HS/RH199S do not have
memory card slots.
Photo file
requirement
File extensions
".jpg"
Photo size:
Less than 4MB recommended
Press ENTER to appear or disappear this
the full screen.
menu
during viewing
CD-R Format:
ISO 9660 and JOLIET.
DVD±R/RW Format:
6.
To
stop viewing
The
[Photo List]
at any
menu
time, press STOP.
ISO 9660
appears.
Maximum Files/Disc:
(UDF Bridge format)
Less than 1999
Notes
on
(total
number of files and
JPEG file
Progressive
and lossless
files
supported.
are
folders)
not
compression
JPEG
image
31
To listen to music while slide show
Skip Images
While
once
viewing
a
press SKIP
picture,
to advance to the next file
simultaneously
(.or >)
return to the
or
You
previous
file.
Rotate
Images
can
display photo
files while
MP3/WMA music files recorded
Use v / V while
clockwise
or
1. Select
viewing
a
picture
to
flip
the
(Refer
picture
counterclockwise.
[Slide Show] option on the [Photo List] menu
"[Photo List] menu options" on page 31).
to
The Slide Show
3.
[Slide Show] option
to "Photo List
(Refer
menu
to
HDD.
2. Press ENTER.
View Slide Shows
1. Select
listening
on
the
menu
menu
[Simultaneous
Slide Show
[Photo List]
options" on page 31).
on
Select
appears.
Music
play] option
on
the
menu
2. Press ENTER.
The Slide Show
menu
appears.
4.
Press ENTER.
Simultaneous Music
5.
3.Useb/B/v/Vtosettheoptions.
[Object] option:
[Selected] Views
slide show
only
Select
Use the MARKER button to select
[All]
multiple
files.
menu
appears.
multiple files.
[Select All] option to select all tracks
press ENTER.
Select [Deselect
selected files.
play
Press MARKER to select
All] option
then
to deselect all
selected tracks then press ENTER.
Select [Cancel] option to exit this menu then
Views slide show all files.
[Speed] option:
press ENTER.
Sets the Slide Show
speed
to
[Slow], [Normal],
or
6.
[Fast].
Use b / B / v / V to
highlight [Start] option
then
press ENTER.
4. Select the
[Start] option
then press ENTER to start
the Slide Show.
5. Press STOP to
the
[Photo List]
stop the Slide Show and
returns to
menu.
To Pause the Slide Show
1. Press PAUSE/STEP
(X)
to pause slide show.
2. When you want to continue slide
PLAY
show, press
(N).
7.
32
Press STOP to
stop the Slide Show and
the
menu.
[Photo List]
return to
Editing
MP3/WMA, JPEG, DivX
a
file
Naming
Card*
You
These
descriptions are MP3 file's operation for
example, other kind's files are operated same way.
Notes for model RH200MHS:
The MP3/WMA, and DivX files on the disc
cannot be
The DivX
Erasing file(s)/folder(s)
Memory Card*
on
MP3/WMA files
1
independently.
characters long.
HDD
1.
Select
2.
Press ENTER.
The
3.
a
Names
file you wish to
menu
Select
Edit
from the HDD
the HDD
or
Memory
options
on
can
the HDD
rename on
appear
on
or
Memory
be up to 32
the
the
menu.
menu.
then press ENTER.
[Edit] option
options appears.
1
or
You
can erase
folder(s)
on
Select
You
a
can
pressing
MP3/WMA, JPEG
the HDD
or
Memory
DivX
file(s)/
.
CLEAR button. To cancel the
by
selections,
files
(folders)
Press MARKER.
4.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
or
2.
Playbck
again.
Selecting multiple
1.
or
Card* 1
file you wish to erase on the menu.
select all files and folders on the menu
press CLEAR
2.
file
can name
Card*
copied or moved to Memory Card.
file(s) in the memory card is not available.
a
1.
or
a
1
1 to mark additional file
[Rename] option then
Keyboard menu appears.
To enter
folder.
Repeat step
Select
characters,
see
press ENTER.
page 47.
(folders).
Press ENTER.
The
menu
options
appear
on
the
menu.
*1
The RH188S/RH188HS/RH199S do not have
memory card slots.
3.
Select
[Delete] option
file(s) is
The selected
then press ENTER.
deleted.
33
Copying
a
to another media or
file(s)
Moving
folder
You
You
can
copy
to another media
file(s)/folder(s)
a
Select
You
a
can
pressing
CLEAR button. To cancel the
1.
1.
by
2.
selections,
again.
files
Follow
(folders)
1-3
steps
shown left.
as
Press ENTER.
The
3.
Selecting multiple
file(s)/folder(s) to another media or
moving, the file(s)/folder(s) are deleted
from the current location.
file you wish to copy on the menu.
select all files and folders on the menu
press CLEAR
file(s)
can move a
folder. After
or
folder.
1.
a
options
Select
Move
on
appear
[Move] option
menu
the left side of the
menu.
then press ENTER.
will appear.
Press MARKER.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
folder.
or
2.
Repeat step
1 to mark additional file
(folders).
Press ENTER.
2.
The
menu
options
Select
3.
Edit
on
the
menu.
then press ENTER.
[Edit] option
options appears.
Select
4.
appear
Copy
[Copy] option
menu
4.
then press ENTER.
You
1.
appears.
can
After
select
a
album
(folder)
to
move.
selecting a media then press
(folder) list appears.
ENTER.
The album
2.
Select
a
folder.
Also, you
can
create
[New Album] option
new
on
album
the Move
(folder).
menu
Select
then
press ENTER.
"NONAME##" folder is created.
5.
You
5.
1.
2.
can
select
a
album
After
(folder)
to copy.
selecting media then press ENTER.
The album (folder) list appears.
a
Select
a
folder.
Also, you
can
create
[New Album] option
new
on
album
the
Copy
(folder).
menu
Select
then
press ENTER.
"NONAME##" folder is created.
Select
6.
[Copy] option
copying.
then press ENTER to
begin
Note:
If
a
folder's
available.
34
depth
is
more
than 5
level, the copy is
not
Select
[Move] option
moving.
then press ENTER to
begin
Note:
Recording
About DVD
The maximum number of titles that
recording
Using
This recorder cannot make
recordings
on
CD-R
Our company takes
failure due to power
no
responsibility
for
Notes for
The
recording
outages, defective discs,
Disc types and
care
of your discs.
recording formats, modes,
settings
This recorder
discs:
can play five different kinds of DVD
pre-recorded DVD-Video discs, DVD-RW,
DVD-R, DVD-RAM, DVD+RW and DVD+R discs. The
DVD-R, DVD+R, DVD+RW discs is
disc format for
always
"Video format"---the
DVD-Video discs. This
same as
means
that
pre-recorded
once
finalized, you
play a DVD-R, DVD+R, or DVD+RW in a regular
DVD player. The DVD-RAM disc format is Video
Recording (VR) format.
By default, the DVD-RW disc format is Video format,
though you can change this to Video Recording (VR)
format, if required. (Reinitializing the disc will erase
the contents of the disc.)
The recording mode is closely related to the disc
format. If the disc format is Video Recording format,
then the recording mode is VR mode; if the disc
format is Video mode, then the recording mode is
Video mode (except for DVD-Video, which is not
recordable, and so does not have a recording mode).
Within the recording modes (which are fixed for them
whole disc) are the record settings. These can be
changed as required for each recording and
determine the picture quality and how much space the
recording will take up on the disc.
can
About HDD
recording
can
record,
erase
and re-record
many times
of the hard disk drive means
as
you like. The capacity
that you can store many hours of video on it, even in
the higher quality recording modes. To help you
organize
the contents, the HDD is divided into ten
genre. You can name and use these genres as you
like---for example, you might have a genre for movies,
another for TV shows, and one for camcorder
recordings.
recording
times shown
uses
erase
not exact because
are
variable bit-rate video
the last title recorded
The Delete Title
menu
hides the
only
on
the disc.
in the Title List
option
title, it does
time available
(except
for the last recorded title
DVD-RW disc in Video
Overwrite
recording
(Original)
actually erase
the recording
not
the title from the disc and increase
on a
mode).
is available
using
DVD+RW
discs.
When
using a DVD+R/RW, the recorder will execute
Menu-making operation to update the new title
and editing when removing the disc from the recorder
the
turn off the recorder. So you must
after
as
recording
compression. This means that the exact recording
time will depend on the material being recorded.
When recording a TV broadcast, if the reception is
poor or the picture contains interference, the
recording times may be shorter.
If you record still pictures or audio only, the
recording time may be longer.
The displayed times for recording and time
remaining may not always add up to exactly the
length of the disc.
The recording time available may decrease if you
heavily edit a disc.
If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 21 (Disc
Format) for how to do this.
When using a DVD-R or DVD+R disc, you can keep
recording until the disc is full, or until you finalize the
disc. Before you start a recording session, check
the amount of recording time left on the disc.
When using a DVD-RW disc in Video mode,
recording time available will only increase if you
or
Recording to the internal hard disk drive (HDD) is
basically similar to recording to a VR mode DVD-RW
disc. You have the full choice of recording quality
options, including the manual mode, and of course
you
maximum of
a
continuously.
the recorder
or
damage to the Recorder.
Fingerprints and small scratches on a disc can
affect playback and/or recording performance.
Please take proper
be recorded
or
CD-RW discs.
and
the HDD allows you to record
12 hours
Notes:
can
the HDD is 255.
on
selecting
the recorder's
remove
operation
the disc
mode to DVD
mode.
Recording
There
XP
are
four
time and
picture quality
preset recording quality modes:
Highest quality setting, gives about
recording time on a
DVD (4.7GB).
SP
Default quality, sufficient for most applications,
gives about 2 hours of recording time on a DVD (4.7GB).
LP
Slightly lower video quality, gives about 4 hour
of recording time on a DVD disc (4.7GB).
EP
Lowest video quality, gives about 6 hour of
recording time on a DVD (4.7GB).
You may see a fragmented picture during playing
--
1 hour of
--
--
--
back the contents recorded in EP mode
.
35
Timeshift
Do not miss
Clip
HDD
a scene
from
live broadcast. If the
a
You
telephone rings while you are watching your favorite
live broadcast, just press "TIMESHIFT" and "PAUSE"
before answering the phone. The timeshift function will
1.
later
viewing.
phone
call
or
2.
viewing interruption,
press
or "SCAN" to watch the program.
Press "STOP" to return to the live broadcast.
can
on
During Timeshift, use pause step, search and
slow-motion to find the starting point.
Press REC at the
Progress
Progress
starting point
of the section you
of the edit is indicated in red
on
the
Bar.
HDD
3.
store
a
program in the HDD storage cache
temporarily.
4.
Progress
shown below.
watching a TV program.
display appears on the screen as
The Progress Bar changes to timeshift
Use pause
the
step, search and slow-motion
to find
ending point.
Press REC at the
ending point
of the section you
want to record.
Press TIMESHIFT while
The
to store the program
(Pause, Live TV/Playback)
Operation
You
during Timeshift
(Hard Disk Drive).
want to record.
"PLAY"
Timeshift
HDD
edit
can
the HDD
be activated and the broadcast is then recorded for
After the
Record
Normal
Bar
5.
playback
Repeat steps
Records of
icon after 5 seconds.
a
continues.
1 and 4 to make several
Clip
program.
12
6.
Press STOP to
stop Timeshift.
Confirm message will appear.
34
5
Indicates
2.
Indicates current Timeshift
3.
Indicates Timeshift start time.
4.
Indicates Timeshift
playback
mode.
position.
elapsed
Indicates the time that is
5.
7.
Selected sections
time.
one
during
hour from Timeshift
trick
play
timeshift. Refer to
(Slow, Scan, etc.)
Playback Operation on
Clip
Jump
button is
pressed
stop automatically.
for 6
one
in Timeshift mode. Press MARKER
point during
Timeshift.
Press SEARCH to recall the marked
36
scene.
to Start or End
Press ENTER
Press b and
beginning
the HDD.
during
during
Timeshift
timeshift. The
menu
will
playback
starts from the very
of the timeshift.
Press B and
hours, the Timeshift will
Marker Search in Timeshift mode
at the desired
on
appear.
2.
deleted.
mark
recorded
are
recording is not available with Clip
Recording. (available only in MPEG2 recording
format)
1.
There is not free space on the HDD, the oldest
timeshift section of the cache will be incrementally
can
screen.
MPEG4
Timeshift to
clip during
Notes:
You
the
less than 5 seconds.
functions
retain the program on the HDD. Refer to
Record on the right.
no
on
the program may not be recorded on the HDD.
Clip records cannot be made for sections lasting
pages 24-27.
You can edit the cached
If
displayed
Or,
If you want to stop Clip recording, press the STOP
button. If you press POWER to stop Clip recording,
Tips:
can use
then press ENTER.
[Yes]
Notes:
start time.
You
Use b / B to select
press STOP again.
The current broadcast is
1.
jumps
to the very end of the timeshift
then goes to pause mode.
To Exit the Timeshift
1.
Press STOP to exit Timeshift function.
2.
Confirm message will appear.
Use b / B to select [Yes] then press ENTER.
The current broadcast is displayed on the screen.
Basic
Recording
from
a
Follow the instructions below to record
Recording
starts
disc is full
or
To Pause the
TV
TV program.
and continues until the
a
Press PAUSE/STEP
2.
When you want to continue
PAUSE/STEP (X).
immediately
recording.
you stop the
To record
Note:
You must load
recordable disc for DVD
a
recording.
watching
The HOME
menu
appears.
2.
Select
[TV] option.
3.
Select
[TV HDD]
or
[TV DVD] option
then press
(X)
to pause
recording.
recording, press
TV program while
one
another
1.
Press TV/DVD to select the TV mode
2.
recording. The TV indicator appears.
Using the TV, select the channel to be
Press HOME.
1.
Recording
1.
Instant Timer
during
viewed.
Recording
ENTER.
Also make
sure
that the TV
input
Instant Timer Recording allows you to make a
recording easily of a preset length without using
is set to this
recorder.
If you load a completely blank disc, the recorder
takes a short while to initialize the disc.
Set
4.
recording mode as necessary by pressing
MODE repeatedly. (XP, SP, LP, EP)
a
REC
Use PR/CH
5.
(+/-)
buttons to select the TV channel
to record.
the
program timer.
Follow
steps
from
TV).
1.
a
Press REC
2.
time
1-5
as
shown left
(z) repeatedly
(Basic Recording
to select the
recording
length.
Changing TV Audio Channel
You
can
select the audio channel
by pressing
(language) to
during viewing TV program.
channel is displayed on-screen.
AUDIO
current audio
Stereo
or mono
Stereo
→
→
The
Recording starts after the first press. Each
subsequent press increases the recording time
within free space (maximum 240 minutes).
The recording time is displayed on the TV screen.
At the end of the recording, the recorder will stop
recording and shut off.
broadcast:
→
Right
Mono
→
broadcast:
Bilingual
Main
Left
listen
Sub
→
Main+Sub
recording with bilingual, set audio channel
[TV Rec Audio] in sub-menu of the Setup
(see page 21).
Recording
For TV
from the
menu
If the sound is of poor quality when set to Stereo,
you can often improve it by changing to Mono (Left
or
Right).
record either NICAM
can
audio. If the NICAM
setting (page 17)
or
regular
is set to
then if the broadcast is
NICAM, the audio
automatically changes
to NICAM and you
will
screen
for
a
display
Time
to check the
automatically
recording
time. The
return to the TV
moment.
window.
The
non-
NICAM sound distortion occurs, due to poor
reception, you can switch off NICAM setting of the
time
Recording
Time
be extended
recording
anytime by
pressing REC (z).
Each subsequent press increases the recording
within free space (maximum 240 minutes).
can
time
Caution
program.
Press REC
(z)
Recording will start. (The
the display window.)
Recording
the disc
REC indicator
lights
continues until you press STOP
or HDD is full.
a
fixed
Recording
Press STOP
If the recorder is
once.
To record for
7.
recalled
To Extend the
NICAM, the regular audio is always recorded. If
Timer
Recording
once
(z)
setting
Auto,
can
record the NICAM audio. If the broadcast is
or
the
Press REC
Also, remaining time of recording is shown in the
This recorder
6.
Checking
(x)
to
on
length
right.
of
time,
see
in
failure)
unplugged (or there is a power
recording, the recording
while the recorder is
will be lost.
(x)
Instant
stop recording.
37
Timer
2.
Recording
This recorder
can be programmed to record up to 16
programs within a period of 1 month. For unattended
recording, the timer needs to know the channels to be
recorded,
the
and
starting
ending
Enter the necessary information for your timer
recording(s).
b / B
(left/right) move the cursor left/right
(up/down) change the setting at the
current cursor position
Press RETURN (O) to exit the Timer Record
time.
Note:
If you
--
menu.
use a
blank disc for timer
completely
recording,
Press ENTER after
you must format the disc before starting timer
recording. (Refer to "Disc Format" on page 21.)
1.
--
v / V
Press TIMER REC to
3.
Press TIMER REC.
The Timer Record
in all the program
Set
a
display
Timer Record List.
recording mode as necessary by pressing
repeatedly. (XP, SP, LP, EP)
REC MODE
will appear.
menu
filling
information.
4.
Press
ENTER, the program will be memorized by
the recorder.
To check the
programming,
will appear.
Check field's "Rec. OK"
indicates that the timer
[Media]
DVD).
[PR]
one
(You
Choose
Choose
a
a
media to record
(HDD
memorized program number, or
inputs from which to record.
cannot select DV
[Date]
Choose
[Start Time]
[End Time]
input.)
date up to 1 month in advance.
a
[Repeat]
Daily (Monday
-
a
desired
Friday),
or
Weekly).
Notes:
VPS/PDC
typically
include
VPS/PDC information in the teletext TV
guide
pages. Please refer to these pages when
setting a timer recording.
When
using VPS/PDC, there may be
beginning of the
instances where the
is not recorded.
38
6.
Make
programmed
(O)
to exit the Timer Record List.
that you load a recordable disc for DVD
and press POWER to switch your unit to
sure
recording
Standby.
Notes:
lights in the display window
standby with the timer
displayed while the [Power Save
(Nothing is
ON.)
For TV recording with bilingual, set audio channel
from the [TV Rec Audio] in sub-menu of the Setup
menu (see page 21).
Mode]
of the program you want to record.
Note that VPS/PDC may not work with every
station.
use
Press RETURN
active.
repeat (Once,
[VPS/PDC] The VPS/PDC system automatically
adjusts the recording time so that even if a
program is not running to schedule, you won't
miss it. For VPS/PDC to work properly, you
must input the correct announced time and date
Stations that
is
when the recorder is in
Set the end time.
Choose
5.
The timer indicator
Set the start time.
the Timer Record List
recording
correctly.
or
of the external
on
the Timer Record List
program
is
You must press STOP to stop the timer recording.
If you set a timer recording to record to DVD but
there isn't
a
recordable DVD loaded at the time of
the
recording, the Recovery Recording feature will
automatically record the program to the HDD for
you.
MPEG4
recording is not available with Timer
recording. (available only in MPEG2 recording
format)
Timer
Recording with
SHOWVIEW System
This
3.
You
can change the information as required using
b/B/v/V(Media,VPS/PDC,etc.)
Refer to "Timer Recording" on previous page.
4.
Choose
5.
Press
system makes programming timer recordings
simple. Most TV guides publish SHOWVIEW
programming numbers with their program details.If
you want to make a timer recording of a program, you
just input the corresponding SHOWVIEW programming
number. The date, start, stop and channel settings are
made automatically. All you have to do is tell the
recorder the recording mode, and whether it's a onceonly recording, or a regular recording.
Up to 16 timer programs can be stored in the
very
ENTER,
To check the
programming,
will appear.
Check field's "Rec. OK"
SHOWVIEW is
registered trademarks of Gemstar
Development Corporation.
The SHOWVIEW System is manufactured under license
from Gemstar Development Corporation.
a
The SHOWVIEW
menu
will appear.
Press SHOWVIEW button
[Number]
indicates that the timer
again
to exit the
Enter the SHOWVIEW
menu.
or
EP).
by
on
the Timer Record List
the Timer Record List
recording
is
programmed
correctly.
6.
Press RETURN
(O)
to exit the Timer Record
menu.
7.
Press SHOWVIEW button.
(XP, SP, LP,
the program will be memorized
the recorder.
recorder.
1.
record mode
a
Make
that you load a recordable disc for DVD
and press POWER to switch your unit to
sure
recording
Standby.
Recording
programming
number.
2.
Use the number buttons then press ENTER to
programming number.
enter the SHOWVIEW
To check the
menu
programming,
the Timer Record
will appear.
If you make a mistake before pressing ENTER,
press CLEAR repeatedly to delete numbers one
by one then correct it.
39
Checking
Timer
If two
Recording
or more
timer programs
Details
The earlier program takes
When the earlier program
Programming
program starts.
If two programs
is turned
can
be checked whenever the recorder
Press TIMER REC twice.
on.
Use v / V to select
timer
a
overlap:
priority.
finishes, the later
set to start at
are
exactly
the
same
time, the program entered first takes priority.
recording.
If the disc is damaged,
complete successfully.
Press ENTER to edit the selected program.
Timer Record menu appears.
the
recording
In this
Check field shows "Rec.
OK", it may
Press CLEAR to delete the selected program
may not
case even
though
the
not be.
from the Timer Record List.
Recording
Input
Recording
You
a
can
from
from External
record from
camcorder
or
Make
Components
component, such
as
to any of the
inputs.
that the
sure
external
an
VCR, connected
recorder's external
1.
External
an
from is connected
component you
properly
want to record
to the recorder. See
page 14-15.
Canceling
Timer
a
2.
Recording
Choose
using
You
can clear a timer setting anytime before the
recording actually starts.
Usev/Vtoselectaprogramyouwanttoeraseon
the Timer Recorder List. If you want to
program, press CLEAR.
erase
3.
a
media
HOME
Press AV/INPUT
input
(TV HDD or TV DVD)
(see page 16).
to record
menu.
repeatedly
to select the external
to record from.
Tuner: Built-in tuner
the
AV1: EURO AV1 AUDIO VIDEO mounted
back
AV2: EURO A/V2 DECODER mounted
Stopping
After
a
Timer
a
timer
Recording
recording
has
in
Progress
started, you
can
Even
on back panel
(VIDEO, AUDIO (L/R), S-VIDEO
IN) mounted on front panel
DV: DV IN mounted on front panel
AV4: AV IN 4
4.
on
the timer is set, the recorder will not
disc loaded and there is not free space
no
5.
the HDD.
A non-recordable disc is loaded and there is not
free space
on
in the
on
Setup
the HDD.
or
(see
the HDD.
Yo u cannot enter
A
a
timer program when:
recording is already underway.
The time you're trying to set has already passed.
There are already 16 timer programs set.
40
or
REC indicator
lights
continues until you press STOP
in
(x)
To record for
a
fixed
Recording"
on
length
of
time,
see
"Instant
page 37.
on.
already 99 titles (DVD-RW, DVD-R,
DVD-RAM), 49 titles (DVD+R, DVD+RW) recorded
on the disc and there are already 255 titles
on
as necessary by
repeatedly. (XP, SP, LP,
the disc is full.
Timer
are
recorded
mode
(z) once.
Recording will start. (The
the display window.)
Recording
[ON]
and there is not free space
page 22).
Power is turned
There
is set to
recording
REC MODE
Press REC
the HDD.
[Disc Protect] option
menu
Select the
pressing
EP)
record when:
There is
back
panel
Recording Troubleshooting
though
on
AV3: AV IN 3 mounted
still
cancel the program.
Press STOP.
Timer
on
panel
6.
Press STOP
(x)
to
stop recording.
Note:
If your source is copy-protected using CopyGuard,
you will not be able to record it using this recorder.
See Copyright on page 51 for more details.
from DV
Recording
Before DV
You
1.
Input
dubbing
2.
DV-equipped camcorder to this
using single DV cable for input and output
of audio, video, data and control signals.
This recorder is only compatible with DV-format
(DVC-SD, DV25) camcorders. Digital satellite tuners
and Digital VHS video recorders are not compatible.
can
connect
recorder
menu
more
than
one
3.
16-bit/48kHz,
or
DV
is
input
choose between Audio 1
HOME
you require.
(original audio)
as
(overdubbed audio).
is set from the
Input
sub-menu of the
4.
Setup
Audio"
on
[DV
Rec
menu.
Audio]
in
See "DV
page 21 for
more
Press AV/INPUT
repeatedly to select the DV input.
display window and on the TV
DV appears in the
screen.
5.
Find the
place on the
recording
want to the
camcorder
tape that you
to start from.
For best results, pause playback at the
which you want to record.
twin stereo tracks of 12can
point
from
on your camcorder, you can use this
recorder's remote to control the camcorder
Depending
using
6.
the
Press REC
STOP, PLAY and PAUSE functions.
(z)
once
to start
recording.
is
automatically stopped if the
recorder detects no signal.
You can pause or stop the recording by
pressing PAUSE/STEP (X) or STOP (x).
Recording
unrecorded section of
source
can
Recording
only record one stereo
audio track. Set [DV Rec Audio] option to [Audio 1]
or [Audio 2] as required (see page 21).
Audio input to the DV IN jack should be 32 or
48kHz (not 44.1kHz).
Picture disturbance on the recording may occur if
the source component pauses playback or plays an
the
[TV DVD] option on the
(see page 16).
or
information.
equipment connected via the DV IN jack (including
two recorders).
It may not always be possible to control the
connected camcorder via the DV IN jack.
Digital camcorders can usually record audio as
bit/32kHz. This recorder
[TV HDD]
then press ENTER.
and Audio 2
DV camcorder
You cannot control this recorder from external
stereo
your digital camcorder is connected to
DV IN jack. See page 15.
panel
Check that the DV audio
You
time to this recorder.
a
sure
Select
a
a
You cannot connect
at
Make
the front
tape, or if the power fails in
component, or the DV cable becomes
disconnected.
You cannot control the camcorder from this
from
Recording
You
can
record from
the DV IN
Using
jack
on
a
a
remote control
Digital Camcorder
In Video
digital camcorder connected
panel of this recorder.
to
can
recording, make sure
DV IN jack is set up (see
Before
that the audio
the
page
input
If you cannot get a picture and/or audio
DV IN jack, check the bullet points:
21).
Make
signal
using
a
while
jack.
You cannot record date and time information from
a
through
the
properly connected.
equipment then
off the connected
on.
the audio
Try switching
If you connect a second recorder using a DV cable,
you cannot control the second DVD from this one.
You cannot control this unit remotely from a
DV cassette.
the DV cable is
switch back
this
recorder's remote.
to the DV IN
sure
Try switching
must be DVC-SD format.
Some camcorders cannot be controlled
component connected
for
Troubleshooting
for
Tips:
source
on screen
control both the
camcorder and this recorder.
The
may remain displayed
after recording stops.
the front
the recorder's remote, you
during recording.
mode, the final frame of the recording
input.
Note:
Depending
on
the connected
not be able to control it
supplied
using
camcorder, you may
the remote control
with this recorder.
MPEG4 recording is not available with the DV
dubbing. (available only in MPEG2 recording
format)
41
Simultaneous
recording
MPEG4
and
playback
another title
Playback
Playback
You
during recording
and
recording for both DVD and built in hard
(HDD) are completely independent. For
disk drive
you can record to either the DVD or HDD
and play back video from the other source at the
example,
source
same
1.
3.
2.
Press HOME to
3.
Usethev/V/b/BandENTERbuttonsto
recording.
select
a
Start
The
display
different media
the Home Menu
type that you
screen.
Set
a
Start
want to
on
source
setup
you want to record
(TV
recording mode as necessary by pressing
repeatedly. (XP, SP, LP, EP)
the HDD.
menu.
To
play
listed
are
back
an
on
the
MPEG4
[Movie
recordings,
Notes:
continue while
You can't
use
recording
while
playing
back the
You cannot edit the video content with MPEG4. If
you want to edit functions, set the [MPEG4]
to [OFF] on the setup menu (See page 21).
simultaneous
playback
during
set to
appear.
A button is not activated
simultaneous
during MPEG4 recording.
(PLAY, TIMESHIFT, MENU/LIST, HOME, DVD,
HDD, etc.)
This function is not available in MPEG4
recording
mode.
The loss of video may occur while MPEG4
recording because of characteristics of MPEG4
HDD
You
can play back
simultaneously.
1.
Start HDD
2.
Press PLAY
video
the current title in
You
(N).
playback starts and the recording will continue
while playing back.
YoucanusePAUSE(X)andSCAN(m/M)
buttons for pause, scan, slow-motion during
playback.
The
Press STOP
(x).
playback will stop
recording position.
The
then returns to the current
until 15 seconds
after
This function does not work in DVD
recording
mode.
This function is not available in MPEG4
mode.
can
select the audio channel to record
Specifications
of MPEG4
the
Recording
Video
Encoding Format
Encoding: XVID format
Resolution: 640 x 480 (XP, SP mode),
480 x 352 (LP mode),
352 x 256 (EP mode)
Audio
Notes:
Playback cannot be started
recording starts.
This is not malfunction.
encoding.
by
pressing AUDIO. The [TV Rec Audio] option on
Setup menu does not affect to the MPEG4
recording.
recording
recording.
recording
option
If you press MENU/LIST when [MPEG4] option is
[ON] in HDD mode, the [Movie List] menu will
and
copying.
You cannot edit programs
recording and playback.
Encoding Format
Encoding: AC3
Quality: 128 kbit/sec, 48 kHz (Sampling rate),
Stereo
Maximum Titles
Less than 1999 titles
Maximum Title Size
2
GBytes
If the size of title recorded
2GBytes,
the
recording
presently
when
creating
the
new
Recordable Time
Approx.
409/625 hours
more
during
a
than
a new
few seconds
title.
(160GB/250GB)
(XP mode),
(SP mode), 281/429 hours (LP mode),
(EP mode)
168/258 hours
220/337 hours
is
will be continued in
title. The unit cannot record
42
the
on
Recording.
List]
play
Notes:
3.
input
[ON]
refer to pages 28.
Playback.
recording will
Slip
Select
The recorded contents
media from the other mode.
Time
to
[MPEG4] option
(See page 21).
This unit will record the video with MPEG4 format
back.
4.
video with MPEG4 video format.
REC MODE
4.
Start
a
HDD
channel, AV input, etc).
time.
1.
record
can
Set the
menu
2.
Recording
123
Editing
Title List and
Chapter
45
67
List Menu
Overview
Using the Title List menu you can edit video content.
editing features available in the Title List menu
depend on whether you are editing video on DVD, or
the HDD, and whether you're editing Original content,
or a Playlist.
The
There
You
are
can
two ways to edit VR mode DVD-RW discs.
edit the Original content of the disc,
directly
you can create and edit a Playlist. The Playlist
doesn't actually change any of the content on the
disc, but just controls how the content is played back.
or
Editing material recorded on the HDD is similar to
editing the Original content of a VR mode DVD-RW,
with similar commands for erasing and naming titles,
as well as fine control over the content of chapters
1.
Note:
if you display the Title List menu for
of the titles may appear with a mark.
These titles were recorded with a Line Input setting
During recording,
HDD,
some
different to the current
During recording,
1.
setting
of the recorder.
these titles cannot be
played.
Press MENU/LIST to
Playback
should be
display the Title List menu.
stopped when you do this.
If you press MENU/LIST when [MPEG4] option
is set to [ON] in HDD mode, the [Movie List]
menu
You
will appear.
also access it
using
can
select
HOME menu,
then select
[MOVIE] option
[DVD] option and press
[HDD]
options: To display menu option, select a
chapter then press ENTER. The options
displayed differ depending on the disc type.
or
[Combine] Combines two titles or chapters into one
(page 48, 49).
[Delete] Deletes the title or chapter. (page 46)
[Delete Part] Deletes a part of the Title (page 46).
[Divide] Divides a title into two (page 49).
[Dubbing] Copies the title to another media. (page 52)
[Full Play] Starts playback of the selected title
including the hidden chapters.
[Hide (Show)] Hides (or Shows) the selected title or
chapter. (page 50)
[Move] Moves a chapter on the Chapter List-Playlist
menu to a position on the menu. (page 50)
[Play] Start playback of the selected title or chapter.
The hidden titles and chapters on the DVD+R/RW
cannot be play back.
[Playlist Add] Adds the title or chapter to the Playlist.
(page 45)
[Protect] Protects accidental recording, editing or
deleting of the title. (page 50)
[Rename (Title Name)] Edits the title name. (page 47)
[Search]
[Chapter]; Displays Chapter List of the Title.
[Time]; Search time for you want start point
of the title. (page 47)
[Sort] Lists the programs on the Title List menu by
Date, Title, or Category. (page 48)
[Title] Displays Title List of the chapter.
within titles for DVD disc.
the
Menu
title
or
ENTER.
When
selecting titles, use the v / V buttons to
display the previous/next page if there are more
than six titles.
Edit ng
-
-
If you are editing a VR mode disc, press
MENU/LIST to switch between Original and
Playlist
menu.
On the left side of the
The main
part of the
titles
screen are
screen
the
menu
options.
the DVD
HDD. You
(or chapter)
change these thumbnails using the THUMBNAIL
button---see Changing Title Thumbnails on page 44.
on
Press DISPLAY to
title
on
display
the Title List
or
can
the information of selected
menu.
After
selecting a title or chapter on the Title List or
Chapter List menu, then press ENTER. The menu
options appears on the left side of the menu. Use
v / V to select a option then press ENTER to confirm
To exit the Title List menu, press RETURN
2.
Indicates the record
elapsed
3.
Un-do/Re-do the last deletion/ action.
mode, free space, and
time progress bar.
Current media
selected title.
4.
Currently
5.
Thumbnail
6.
Shows the selected title number and total number
of titles.
7.
Shows the title name, recorded
date, and
recording length.
your selection.
2.
[Undo]/[Redo]
(page 48)
shows thumbnails of the
(O)
repeatedly.
43
HDD, VR Mode: Original and
Adding Chapter
Markers
Playlist Editing
HDD
Titles, Chapters and Parts
Titles in the disc's
You
content contain
original
-RW VR
can
chapter
one or
chapters. When you insert a disc's title into the
Playlist, all the chapters within that title also appear. In
other words, chapters in the Playlist behave exactly as
chapters on a DVD-Video disc do. Parts are sections
of Original or Playlist titles. From the Original and
Playlist menu you can add or delete parts. Adding a
chapter or title to the Playlist creates a new title made
up of a section (ie., chapter) of an Original title.
Deleting a part removes part of a title from the
Original or Playlist menu.
create
RAM
chapters
+RW
within
marks at the desired
+R
a
title
by inserting
points.
more
Caution
When
editing using
functions, the
the
Note:
Chapter markers are inserted at regular intervals
automatically. You can change this interval from the
Initial Setup menu (see "Auto Chapter" on page 21).
During recording
want to start
A
pause between edits. This is not
HDD
a
editing
tape?
DVD like
a
editing
a
video
a
No. When you edit a video tape you need one video
deck to play the original tape and another to record
the edits. With
DVD, you edit by making
'Playlist'
what to play and when to play it. On playback, the
Recorder plays the disc according to the Playlist.
About word
-RW VR
'Original'
and
a
of
'Playlist'
the edited version.
Playlist:
44
content refers to what's
actually
recorded
the disc.
disc
---
Title Thumbnails
content refers to the edited version of the
how the
Original
content is to be
played.
-RW VR
RAM
+RW
Press THUMBNAIL to make the
picture
the
The still
Original
+R
is
from the
from within
one
picture
Playlist
or
currently displayed
that appears in the Title List menu.
that you choose appears in both the
menu.
Tip:
change the thumbnail picture of the title
Chapter List menu. Select a chapter on the
Chapter List menu then press THUMBNAIL. The
thumbnail picture of the title that includes the chapter
is changed.
on
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
on
screen.
title.
You
RAM
Original:
the TV
Each title displayed in the Title List menu
represented by a thumbnail picture taken
start of that title or chapter.
If you prefer, select a different still picture
malfunction.
Is
on
you
start and end frames may not be
exactly as set in the start and end point display.
During Playlist playback, you may notice a
momentary
playing back, at the point
chapter, press CHP ADD.
marker icon appears
chapter
Changing
Delete, Add and Move
or
a new
can
the
also
Making
-RW VR
a
New
Adding Additional Title/Chapters
RAM
to the Playlist -RW
Playlist
RAM
VR
Use this function to add
You
the
an Original title or chapter to
Playlist. When you do this, the whole title is put
into the Playlist (you can delete bits you don't need
later
see Deleting an Original or Playlist
title/chapter on page 46).
Playlist
1.
can
add
title
Choose
menu or
Playlist,
if you add more chapter markers to the Original
these are not automatically copied over into the
Playlist
You
can
add up to 999
only
title/chapter
title
or
then press ENTER.
menu
options
on
appears
the left side of the
screen.
later,
chapters to one disc If you
chapter of a title, use the Adding
Playlist on this page.
.
a
title or chapter on the Title List-Original
Chapter List-Original menu to put into the
then press ENTER.
menu
options
appears
on
the left side of the
2.
menu.
2.
a
a
menu or
Playlist,
a
to the
Choose
The
to
title.
want to add
1.
The
Original title or chapter to add
if it is already registered.
chapter on the Title List-Original
Chapter List-Original menu to put into the
a
---
The title appears in the Playlist complete with the
chapter markers that appear in the Original. However,
an
even
Use v / V to select
options
Use v / V to select
[Playlist Add] option
then press
ENTER.
3.
Choose
[Playlist Add]
from
menu
then press ENTER.
a
registered
Title
List-Playlist
to insert
a
title
that is
or
already
chapter, then
press
Edit ng
ENTER.
4.
Repeat steps 1-3
the Playlist.
to add additional title
or
chapter
on
You
can
view the added
List-Playlist
3.
Select
The
chapters
on
the
Chapter
menu.
then press ENTER.
title appears in the updated Playlist. All
of the title are added to the Playlist.
[New Playlist]
new
chapters
5.
Press RETURN
back to the Title
(O) to exit,
List-Original
or
MENU/LIST to go
menu.
45
Deleting an Original
Title/Chapter
or
When you
from the
erase a
title
or
chapter
Playlist
You
menu, you only remove it from the Playlist;
title/chapter remains in the Original menu.
If you choose to delete
a
title
or
Deleting
chapter
Playlist
can
a
delete
a
Part
HDD
-RW VR
part which you do
RAM
not want in the
title.
the
1.
Useb/B/v/Vtochooseatitleyouwantto
delete
from the
The
Original (title/chapter) menu, the title or chapter is
actually deleted from the disc and the remaining time
available for recording increases. Titles/chapters
deleted from the Original are also removed from the
Playlist.
2.
on
the Title List
options
appears
then press ENTER.
the left side of the menu.
menu
on
Select
[Delete Part] option then press ENTER.
Edit (Delete Part) menu appears on the TV screen.
[Start Point] icon is highlighted.
Edit
Example:
(Delete Part) (HDD)
Note:
It may not be possible to delete
than 5 seconds long.
1.
chapters
that
are
less
Useb/B/v/Vtochooseachapterortitleyou
on the Title List or Chapter List
want to delete
menu
The
then press ENTER.
menu
options
appears
on
the left side of the
screen.
Select
2.
3.
[Delete] option
from the
options
on
the
menu.
4.
Example:
Title List
Starts
and
playback
use
slow-motion to find the
(HDD)
Press ENTER at the
pause step, search and
starting point.
starting point
of the section
you want to delete.
'End Point' icon is highlighted.
The
5.
6.
part is indicated
Use pause
the ending
step,
on
the
Bar.
point.
Press ENTER at the
ending point
you want to delete.
You can cancel the selected
select
Progress
search and slow-motion to find
[Cancel]
point,
of the section
use
v / V to
icon then press ENTER.
Tip:
With HDD
Select
Press ENTER to confirm.
3.
The confirm message for
deleting
ENTER, then repeat steps
will appear.
Use b / B to select
[Yes] then press ENTER.
chapter or title is deleted.
After pressing ENTER, the new, updated menu
displayed.
4.
7.
The selected
5.
Repeat steps
1
-
is
4 to continue to delete from the
menu.
(O) repeatedly
to exit the
is
changed
If
more
recording,
name
to 'Deleted Title'.
than two titles
are
the deleted title's
are
combined into
repeatedly deleted,
the
one.
When you are deleting a title or chapter, only the
last one on DVD+RW increases remaining recording
46
edit, select [Done] icon then press
The confirm message for deleting will appear.
Use b / B to select [Yes] then press ENTER.
The selected part is deleted from the title and Title
menu
appears.
Note:
When DVD+RW
time.
3-6.
menu.
Notes:
titles
If you finish to
ENTER.
List
Press RETURN
6.
recordings, you can delete additional part.
[Next Part] icon on the menu then press
It may not be possible to delete
than 3 seconds long.
parts that
are
less
Naming
You
can
Time Search
Title
Playlist
titles
be up to 32 characters
and
long.
Original
can name
Names
1.
a
Choose the title you want to
menu, then press ENTER.
The
options
menu
appears
independently.
RAM
You
1.
Use v/V to select
Keyboard
3.
-RW Video
+R
point
of the title.
[Rename (Title Name)] option
Useb/B/v/VtochooseatitleontheTitleList
The
2.
then press ENTER.
appears on the left side of the
options
Select
[Time] option
[Search]
then press ENTER.
menu
select start
menu
the left side of the
menu.
2.
can
-R
-RW VR
the Title List
name on
on
+RW
HDD
menu
Example:
appears.
then press ENTER.
appears
Title List
menu.
on
the TV
screen.
(HDD)
Enteranameforthetitle.Useb/B/v/Vto
select
a
character then press ENTER to confirm
your selection.
Use MENU/LIST button to
change keyboard
type.
Current
OK: Select to finish.
picture
Cancel: Cancels all entered characters.
Inserts a space at the cursor position.
Delete: Deletes the previous character at the
Space:
cursor
End time
position.
b / B: Moves
cursor
to left
or
right.
Start time
Tip:
Remote control buttons for
PLAY
X
x
(N):
Inserts
a
(STOP),
a name
cursor
. / >: Moves
the after character at
3.
(0-9):
to left
or
4.
right.
Edit ng
Use b / B to find the
The
point
point you want to start.
increase 1 minute step.
If you press and hold b / B then the
5 minute step.
previous
position.
cursor
point
position.
cursor
CLEAR: Deletes the
character at the
Numbers
Selected
entering
space at the
(PAUSE/STEP): Deletes
the cursor position.
Selected time
Press ENTER to start selected
point
increase
point.
Enters the
character at the
cursor
corresponding
position.
Tip:
You
can
add the genre
only
for HDD title
4.
Choose OK then press ENTER to fix the
and return to the previous menu screen.
5.
Press RETURN
(O) repeatedly
name.
name
to exit the
menu.
Notes:
Names
can be up to 32 characters long.
For discs formatted on a different recorder, you will
see only a limited character set.
When
recording
on
discs, the entered
player only
DVD-R, DVD+R
name
is
displayed
or
DVD+RW
on
the DVD
after finalization.
47
Sort
Combining
HDD
This function allows you to
organized by Date, Title,
HDD
menu.
So you
can
access
or
show
Category
on
listings
the Title List-
find title you want to watch
easily.
Choose any title
press ENTER.
1.
The
menu
on
options
the Title List-HDD menu, then
appears
on
HDD
Use this function to combine two
HDD titles into
Use v/V to select
Sort
options
This function is not available if there is
If there
[Sort] option
only
one
titles within the HDD.
the left side of the
are more
than 60 titles
on
the
HDD, you
cannot combine the titles.
then press ENTER.
appears.
adjacent Original-
one.
Notes:
menu.
2.
Two Titles Into One
1.
On the Title List-HDD menu, select the first title of
the two titles you want to combine then press
ENTER.
The
menu
options
appears
on
the left side of the
screen.
2.
[Combine] option
then press ENTER.
Use v/V to select [Date], [Title] or [Category]
option then press ENTER.
After pressing ENTER, the sorted menu is
displayed.
3.
Undoing/Redoing
Deletion
-RW VR
the Last
3.
undo the last
one
deletion you
made).
Use v / V to select
[Undo] option then press ENTER.
It doesn't matter whether you are currently in the
menu screen; the last deletion is undone.
Notes:
You can't undo
a recording.
anything after ejecting the disc from the
recorder or switching the recorder into standby mode.
You can still undo a deletion even after exiting the
menu display.
You can't undo
Tip:
You
can
option.
redo the last undo action
Select the second title of the two titles you want to
combine then press ENTER.
Confirm message appears.
RAM
If you make a mistake while deleting, you can undo it.
There is one level of undo (in other words, you can
48
Select
using
the
[Redo]
4.
Use b / B to select
[Yes] then press ENTER.
pressing ENTER, the updated menu is
displayed.
After
Divide One Titles Into Two
HDD
One
+RW
Use this command to
1.
split
a
title up into two
On the Title List menu, select
divide then press ENTER.
The
Combining
menu
options
appears
on
a
new
titles.
title you want to
the left side of the
2.
Select
Example:
Title List
Original chapters
+RW
into
+R
RAM
adjacent Playlist
or
one.
Note:
This function is not available if there is
1.
[Divide] option.
-RW VR
Into
Chapters
Use this function to combine two
chapter
screen.
HDD
Two
On the
chapter
(HDD)
only
one
within the title.
Chapter
List menu, select the second
chapters you want to combine
of the two
then press ENTER
The menu options appears
on
the left side of the
screen.
2.
Use v / V to select
[Combine] option.
The combine indicator appears between the two
chapters you want to combine.
3.
Press ENTER.
Edit (Divide)
highlighted.
Current
menu
appears.
[Divide] option
is
picture
3.
Press ENTER.
The first title's
thumbnail
The second title's
thumbnail
4.
Use
play, pause step, search and slow-motion
point you want to divide the title.
Edit ng
to
find the
5.
Select
[Divide] option
then press ENTER at the
point.
To reset the
point, select [Cancel] option
Repeat from step 3.
then
press ENTER.
6.
Choose
[Done] option
dividing point.
then press ENTER to fix the
The title is divided into two
new
titles. It take up to
4 minutes to divide.
Note:
You cannot select
dividing point
less than 3 seconds.
49
Moving
-RW VR
a
Playlist Chapter
Tip
RAM
Use this function to re-arrange the playing order of
Playlist chapters on the Title List-Playlist menu.
If you select a hidden chapter or title on the Title List
or Chapter List menu, you can 'show' it by choosing
[Show] option on the menu. After doing that, you are
able to
see
the
Protect
Note:
This function is not available if there is
only
a
chapter
Title
+RW
+R
-RW VR
Use this function to
Select
a
chapter
the
on
Chapter List-Playlist
menu.
Press ENTER.
2.
The
menu
on
appears
the left side of the
menu.
[Move] option
from
Playlist
then press ENTER.
options
4.
Hide
a
You
skip playing chapters
Chapter/Title
or
+RW
+R
titles without
deleting
from the disc.
1.
Use vVbBto choose
to hide
on
the Title List
a
or
chapter
Chapter
or title you want
List menu, then
press ENTER.
Options
2.
Select
appear
the left side of the
screen.
Title List
(DVD+RW)
Press ENTER to confirm.
The
50
on
[Hide] option.
Example:
3.
protect against accidental
or
of the title.
deleting
Press MENU/LIST to
display
Use vVbBto choose
chapter's
or
Options
3.
Useb/B/v/Vtochoosetheplaceyouwantto
move the chapter to then press ENTER.
After pressing ENTER, the updated menu is
displayed.
can
2.
RAM
a
the Title List
menu.
title you want to
protect
then press ENTER.
Use v / V to select
3.
recording, editing
1.
options
title.
one
chapter.
1.
or
title's thumbnail will dim.
4.
Select
appear
[Protect]
on
the left side of the
from the
screen.
options.
Press ENTER to confirm.
The lock mark will appears
on
the title's thumbnail.
Tip
If you select a title that has already been protected on
the Title List menu, you can 'unprotect' it by choosing
[Protect] option from the Title List menu options. After
doing that,
you
can
edit and delete the title.
authorized
by Macrovision corporation. Reverse
engineering or disassembly is prohibited.
Dubbing
Before
Use the
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
Dubbing
COMPATIBLE WITH THIS PRODUCT AND MAY
copying features of this recorder to:
important recordings stored on the
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
Back up
a DVD.
Make
a
Transfer video from
a
recording
on
the HDD to
The
method of
editing.
is to
use
the other way around.
If the title's
length is less than 5 seconds,
available. (from HDD to DVD)
Restrictions
on
the
dubbing
copying
Some video material is copy-once
material cannot be copied to HDD
protected:
or
Such
DVD.
You
can identify copy-once protected material during
playback by displaying disc information on-screen.
NTSC format
from the
analog or the DV
correctly with this recorder.
Video signals in SECAM format (from the built-in TV
tuner or from the analog inputs) are recorded in PAL
signals
is not recorded
inputs
format.
What is 'CPRM'?
CPRM is
protection system (with scramble
system) only allowing the recording of 'copy once'
a
copy
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
CPRM
recordings
can
only
be made
discs formatted in VR mode
or
on
DVD-RW
DVD-RAM
discs, and
CPRM
are
recordings can only be played on players
specifically compatible with CPRM.
that
625p
RECORDER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
copying (Maximum 12x)
Copying between DVD and HDD is a completely
digital process and therefore involves no loss of
quality in the audio or video. This means that you can
transfer back and forth without having to worry about
the quality getting worse with each copy 'generation'.
It also means that copying can be carried out at the
maximum speed possible.
When copying from HDD to DVD, the speed of
copying depends on the recording mode and the kind
of DVD disc you're using.
Minimum fast
copying
times
The table below shows the minimum HDD to DVD
copying
time for 2 hours of video recorded with SP
mode.
Disc
Disc
Type
Speed
16x
DVD-R / DVD+R / DVD+RW
8x
8 min.
DVD+R DL
8x
13 min.
(4x)
DVD-RW
6x
12 min.
(6x)
DVD-RAM
5x
11.5 min.
DVD-R / DVD+R
4x
13 min.
(4x)
17 min
(3x)
3x
DVD-R / DVD-RW / DVD-RAM
This
product incorporates copyright protection
technology that is protected by method claims
of
patents and other intellectual property
6.5 min.
(12x)
(8x)
(5x)
DVD-RW / DVD+RW
DVD+R / DVD+RW / DVD+R DL
Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the area in which you are
making a copy. Copying of copyright material such
as films or music is unlawful unless permitted by a
legal exception or consented to by the rights owner.
Copying Time
(Record Speed)
DVD-R / DVD+R
DVD-RAM
Copyright
certain U.S.
HDD/DVD
Fast
Note:
is not
THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL
the One
simplest
copying
Touch Copy feature. Using this you can very simply
copy the title that's currently playing from HDD to
or
PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE 'STANDARD DEFINITION' OUTPUT. IF
DVD to the HDD for
Transfer edited video from the HDD to DVD.
DVD,
PICTURE. IN CASE OF 625 PROGRESSIVE SCAN
PICTURE
DVD copy of a
in another player.
play
HDD to
21 min.
2.4x
(2.4x)
25 min.
2x
(2x)
Notes:
All times in the above table
are
approximate.
Actual copy speed varies with the
being recorded.
part of the disc
There may be cases where even 4x/6x/8x/16x
compatible discs do not copy at full speed.
Fast
copying
initialized
on
may not be possible when
another recorder.
using
disc
owned
rights
by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only, unless otherwise
51
Dubbing
1.
from HDD to DVD
On the Title List-HDD menu, select
a
Dubbing
title you want
1.
to dub then press ENTER.
The
menu
options
on
appears
the left side of the
Use v / V to select
[Dubbing] option
Fast),
To
information
on
Fast
stop dubbing
press ENTER.
highlighted,
at any other
time, press
recording
depending on
time of
[Fast]
data size of
in
source.
Stopping dubbing
[Fast]
recording and
to that point will be lost.
and
mode could be varied
mode
will cancel the
The
4.
When
[Start] icon
Dubbing starts.
5.
To
stop dubbing
is
highlighted,
at any other
press ENTER.
time, press
(x).
partway through
any data recorded up
space on the disc is
mode is not available.
remaining
title.
not be
Stopping dubbing in [Fast] mode partway through
recording and any data recorded up
to that point will be lost.
will cancel the
insufficient, the
mode is not available for edited HDD title
[Fast]
Clip Recording
Depending on the conditions of the recording
equipment or the disc itself, the dubbing may
capable.
The
recording
time of
[Fast]
mode
can
take up to 19
minutes.
The
[Fast]
mode is not available for edited title
the DVD-RW with VR
52
(XP, SP, LP, EP,
Notes:
The
If the
appears.
Only available when copying VR mode disc
(See page 51 for more information on
copying.)
STOP
(x).
Notes:
[Fast]
menu
to HDD.
Fast
icon is
[Start]
Dubbing starts.
STOP
then press
Fast),
Fast:
more
copying.
5.
[Dubbing] option
Use b / B to select record mode
or
highlighted.
Fast: See page 51 for
When
the left side of the
then press V.
'Start' icon is highlighted.
(XP, SP, LP, EP,
then press V.
'Start' icon is
4.
on
appears.
Use b / B to select record mode
or
Use v / V to select
Dubbing
menu
3.
3.
appears
title you want to
ENTER.
then press
ENTER.
Dubbing
options
a
screen.
2.
2.
On the Title List menu, select
dub then press ENTER.
Menu
screen.
from DVD to HDD
recording
mode.
on
One Touch
Copy (HDD
to
DVD)
The One Touch
Copy feature copies the currently
playing title from the HDD to DVD. The whole title is
copied, regardless of where in the title you start
copying. The recorder copies at the maximum speed
possible.
For One Touch
to
Copy
work, make
sure
that
a
recordable DVD disc is loaded.
During
HDD
playback, press
DUBBING to copy the
current title to DVD.
The
on-screen display indicates that the title
copied. Playback continues while copying.
You cannot
copy
a
use
the One Touch
title if any
Copy
is
being
function to
part of the title is copy-once
protected.
One Touch
One Touch
Copy
Copy (DVD
from DVD to HDD
to
copies
HDD)
a
single
title to the HDD in real time. When you start copying,
playback jumps back to the start of the title, then
continues
through to the end of the title, when
recording automatically stops. The copy will be
in the recording mode (XP, SP, LP, EP) that is
currently set.
During
DVD
playback, press
made
DUBBING to copy the
current title to HDD.
Playback
starts
title is
from the
again
current title. The
on-screen
beginning of the
display indicates that
the
being copied.
Notes:
Video CD cannot be
The
copying stops
badly scratched or
If
some
copied
copy
Dub ing
to HDD.
when then recorder detects
a
protected part.
part of the title being copied is copy-
protected, copying will start,
portions will not be copied.
During Playlist
title's
but the
playback,
copy-protected
One Touch
Copy
is
not available.
Tip:
To
stop dubbing
at any other
time, press STOP (x).
53
2.
Reference
To overwrite
a new
video
You
can remove
STOP
+RW
recording
play
will appear
menu
or
stop mode.
as
shown below.
Tip
Additional Information
Overwriting Recording
Press TITLE in
Title List
on a
the Title List
menu
by pressing
(x).
previously
recorded
title, follow these steps. This feature is not
available for DVD+Rs, that always record at the end
of the Disc.
Select
1.
input
you want to record
source
(TV
channel, AV1-4, DV).
Press MENU/LIST to
2.
the Title List
display
menu.
To
3.
play
back
a
press ENTER
title, select the title you
or
PLAY
want then
(N).
Playing Your Recordings on Other
Players (Finalizing a Disc)
Most
regular
DVD
recorded in Video
players
play
can
Use vVbBto choose
3.
a
title you want to
Check the manual that
Press REC
4.
Overwrite
to start overwrite
(z)
recording
recording.
point
starts from the start
new
(x)
to
stop the overwrite recording.
title is created and
updated
menu
is
displayed.
Notes:
If the overwrite is
longer
of the current
a
protected title.
recording
than the
title, the
overwriting stops
at the
protected,
starting point of
the
the
title.
If the selected title's
seconds, the
recording length
Title List
can
1.
54
to
play.
'fixes' the
recordings and editings in place
be played on a regular DVD
computer equipped with a suitable DVD-
that the disc
so
player
or
can
ROM drive.
Finalizing a Video mode disc creates a menu screen
navigating the disc. The menu can be accessed by
pressing MENU/LIST or TITLE.
player
that is
on
displayed on the
capable of playing DVD+RW
menu
DVD+R discs.
Insert DVD+R
To finalize
disc, refer
to "Finalize"
on
page 22.
Notes:
Unfinalized DVD+RW is
DVD+RW disc recorded
playable
on
regular
DVD
players.
The edited contents of
compatible
Any edited
compatible
on
regular
a
DVD+RW disc is
DVD
players only
after
already.
contents of the DVD+R disc
are
not
regular DVD players. (Hide, chapter
combine, added chapter mark, etc.)
How long finalization takes depends on the type of
on
disc, how much is recorded
number of titles
on
DVD+R DL disc
can
finalize.
or
a
finalization.
+R
view the Title List
other DVD
or
displayed
or Players
menu
other DVD Recorders
+RW
is less than 10
next title is overwritten. But if the next
protected, overwriting stops.
Viewing
You
not.
player
next title is
overwritten. But if next title is
title is
with the other
play
or
for
This function is not available for
length
also
of
Finalizing
Press STOP
The
came
or
can
mode, finalized
check what formats of discs it will
the title.
5.
players
DVD-RW discs recorded in VR
overwrite.
finalized discs
mode, finalized DVD+R
DVD+RWs. A small number of
DVD
on
the
disc, and the
the disc.
take up to 30 minutes to
Language Codes
Use this list to
Disc
input
your desired
language
for the
following
initial
settings:
Audio, Disc Subtitle, Disc Menu.
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
an area
Area
code from this list.
Code
AF
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Finland
FI
Mexico
MX
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Heard and McDonald Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
Hungary
HU
New Zealand
NZ
Sweden
SE
Chile
CL
India
IN
Switzerland
CH
CN
Indonesia
ID
Nigeria
Norway
NG
China
NO
Thailand
TH
Colombia
CO
Israel
IL
Oman
OM
CG
Italy
IT
Pakistan
PK
Turkey
Uganda
TR
Congo
Costa Rica
CR
Jamaica
JM
Panama
PA
Ukraine
UA
Croatia
HR
JP
United States
US
KE
Paraguay
Philippines
PY
CZ
Japan
Kenya
PH
Uruguay
UY
Denmark
DK
Kuwait
KW
Poland
PL
Uzbekistan
UZ
Ecuador
EC
LY
Portugal
PT
Vietnam
VN
Egypt
EG
Libya
Luxembourg
LU
Romania
RO
Zimbabwe
ZW
El Salvador
SV
Russian Federation
RU
Afghanistan
Argentina
AR
Ethiopia
Fiji
Australia
AU
Austria
AT
Belgium
Czech
Republic
SG
SK
UG
55
Controlling Your TV with the
Supplied Remote Control
You
can
control the sound
level, input
power switch of your LG TV with the
You
can
control your TV
using
You
source, and
supplied
other TVs with the remote
Controlling
remote.
can
control the sound
level, input
source, and
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
manufacturer code.
the buttons below.
1.
While
holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV
2.
(see
the table
below).
Release TV POWER button.
Code numbers of controllable TVs
If
more
them
than
one
at
one
code number is
listed, try entering
time until you find the
a
one
that works
with your TV.
TV Control
Buttons
Manufacturer
Code Number
LG / GoldStar
1
Zenith
1,3,4
Samsung
6,7
(Default),
Sony
8,9
Hitachi
4
2
Notes:
Depending
function
on
on
your
the TV,
TV,
some or
even
after
all buttons may not
the correct
entering
manufacturer code.
By pressing
You
POWER
Turn the TV
AV/INPUT
Switch the TV's
can
on or
If you enter a new code number, the code number
entered will be erased.
previously
off.
input
source
between the TV and other
input
sources.
56
PR/CH +/--
Scans up or down through
memorized channels.
VOL +/--
Adjust
MUTE
Temporarily
press again
to restore.
default
again.
the volume of the TV.
turns TV sound
When you replace the batteries of the remote, the
code number you have set may be reset to the
OFF,
setting.
Set the
appropriate
code number
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
contacting
Cause
Symptom
Solution
The power cord is disconnected.
No power.
Plug
the power cord into the wall
outlet
No
service.
picture.
securely.
TV/DVD mode for the recorder is set
Press TV/DVD
to TV.
repeatedly to choose DVD mode. TV
indicator disappears in the display
on
the remote control
window.
The TV is not set to receive recorder
Select the
signal output.
on
The video cable is not connected
Connect the video cable
the TV
appropriate video input
the picture from the
mode
so
recorder appears
the TV
on
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
connected with the
equipment
audio cable is not set to receive
recorder
signal output.
The audio cables
not connected
are
the TV.
on
input mode on the
you can listen to the
sound from the recorder.
audio receiver
so
Connect the audio cable
securely.
securely.
The
playback picture
is
The power of the equipment connected
with the audio cable is turned off.
Turn
The audio
Replace
connecting
The disc is
cord is
damaged.
the
on
equipment
connected
with the audio cable.
it with
new one.
Clean the disc.
dirty.
poor.
The recorder does not
start
No disc is inserted.
Insert
disc.
a
(Check that the disc
display window is lit.)
indicator in the
playback.
An
unplayable
disc is inserted.
Insert
a
playable
disc.
(Check the
disc
type, color system, and regional code.)
The disc is
placed upside
down.
Place the disc with the
side
playback
down.
The disc is not
placed
within the
guide.
The
picture from
input is
the
dirty.
The
level is set.
Rating
The video
Cancel the
the
from the external
signal
distorted
Some channels
are
Those channels
are
recorder.
The
picture or sound of
broadcasting channel is
weak or missing.
Aerial
Camcorder
Camcorder is off.
image
is not
image
via
cables
not stored in the
are
loose.
Camcorder
input
or
rating
tray
guide.
Rating
function
or
change
level.
Connect the component
your TV.
Restore channels. See
directly
to
"Program
Edit"
page 17.
Tighten
connections
Turn camcorder
on
or
replace
and
cable.
operate
properly.
shown.
A/V
the disc
You cannot connect via this recorder.
on
skipped over when
using PR/CH (+/-).
or
on
inside the
Clean the disc.
The disc is
component is copy-protected.
external
Place the disc
correctly
DV IN to
The recorder's
source
is incorrect.
Use AV/INPUT to select
input
channel
(AV1, AV2, DV, etc.)
recorder is not shown
on
TV
screen.
57
Cause
Symptom
Cannot
The disc
play a disc
using this
recorded
recorder
on
Some
another
Solution
recorded in Video mode.
was
will not
players
play
Finalize the disc.
(page 22)
No solution.
even a
finalized disc recorded in Video mode.
player.
The disc
was
recorded in VR
The other
player must be RW
compatible in order to play it.
mode,
Discs recorded with copy-once material
played on other players.
No solution.
The
Use another disc.
cannot be
Cannot record
not record
or
did
The
source
protected.
When
setting
When
the
protected
recording
possible.
the
on
to record is
trying
recording channel,
on
recording
programs that
is not
are
you
copy
channel is tuned
Timer
blank space
remaining
disc is insufficient.
successfully.
the TV's
to
a
own
the
source.
Select the channel
the recorder's
on
built-in TV tuner.
tuner.
Video mode
You cannot record the
Use
disc,
a
VR mode formatted disc for
copy-once material.
are
copy-once
cannot be recorded.
Clock in recorder is not set to correct
Set clock to correct time. See "Auto
time.
Clock Set"
or
"Manual Clock Set"
on
page 18.
Timer has been
programmed
Reprogram
Recording"
incorrectly.
Timer record indicator
appear after
Stereo Audio Record
and/or
Playback
TV is not
is not
light does
programming timer.
not
Reprogram
page 38.
Timer.
No solution.
Stereo-compatible.
Broadcast program is not in stereo
present.
Timer. See "Timer
on
No solution.
format.
The recorder A/V Out
jacks are
jacks.
Make A/V connections. Stereo is
not
connected to TV A/V In
available
only
via A/V
output from the
recorder.
The recorder Audio/Video Out is not
Select AUX
selected for
input.
viewing
at the TV.
or
A/V
source as
TV
The recorder's TV audio channel is
Set TV audio channel mode to Stereo.
set to
See
mono.
"Changing
TV audio channel"
on
page 37.
The remote control
The remote control is not
does not work
the remote
properly.
sensor
pointed
Point the remote control at the remote
at
of the recorder.
sensor
of the recorder.
The remote control is too far from the
Operate
recorder.
7m.
There is
an
obstacle in the
path
of the
the remote control within
Remove the obstacle.
remote control and the recorder.
The batteries in the remote control
are
Resetting
the recorder
If you observe any of the
The unit is
on or
58
following symptoms...
but the power will not turn
off.
The front
The
plugged in,
Replace
the batteries with
new ones.
exhausted.
panel display is not working.
recorder is not operating normally.
...you
can
reset the recorder as follows:
Press and hold the POWER button for at least five
seconds. This will force the unit to power off then
turn the unit back on.
Unplug
the power
plug it in
and then
cord, wait
again.
at least five
seconds,
Specifications
General
Power
AC
Power
35W
requirements
consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Television
200-240V, 50/60 Hz
430 X 54 X 275
4.1
mm
(w
x
h
x
d)
without foot
kg
5˚C to 35˚C
5 % to 90 %
system
PAL
Recording
format
PAL
I, B/G, I/I, SECAM D/K, K1 color system
Recording
format
DVD Video
Recording
Recordable media
HDD
Recording, DVD-VIDEO
(RH188S/RH188HS: 160GB, RH199S/RH200MHS: 250GB),
DVD-ReWritable, DVD-Recordable, DVD+ReWritable,
DVD+Recordable, DVD+Recordable (Double Layer), DVD-RAM
Recordable time
DVD
(4.7GB): Approx. 1 hour (XP mode), 2 hours (SP mode),
(LP mode), 6 hours (EP mode)
DVD+R DL (8.5GB): Approx. 3 hour (XP mode),
3 hours 40 minutes (SP mode), 7 hours 10 minutes (LP mode),
10 hours 30 minutes (EP mode)
HDD (160GB/250GB, MPEG2 Recording):
Approx. 43/66.5 hours (XP mode), 84/129 hours (SP mode),
164/251 hours (LP mode), 233/356 hours (EP mode)
4 hours
Video
recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
27MHz
MPEG2
or
MPEG4
(HDD only)
48kHz
Dolby Digital
Playback
Frequency
response
Signal-to-noise
ratio
Harmonic distortion
Dynamic
Inputs
range
AERIAL IN
(PCM 48 kHz): 8 Hz to 22 kHz, CD: 8
DVD(PCM96kHz):8Hzto44kHz
More than 100 dB (AUDIO OUT connector)
Less than 0.008% (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
input, 75 ohms
Vp-p 75 ohms, sync negative,
1.0
AUDIO IN
2.0 Vrms
DV IN
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
HDMI video/audio
output
(RH188HS/RH200MHS only)
Audio output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
Hz to 20 kHz
Aerial
VIDEO IN
S-VIDEO IN
Outputs
DVD
more
than 47
RCA jack
x
2 / SCART
kohms, RCA jack (L, R)
(Y) 1.0 V (p-p), 75 Ω, sync negative,
(C)0.3V(p-p)75Ω
4 pin (IEEE 1394 standard)
Mini DIN
x
4-pin
x
1
1 Vp-p 75 Ω, sync negative, RCA jack x 1 / SCART
(Y) 1.0 V (p-p), 75 Ω, sync negative, Mini DIN 4-pin
(C)0.3V(p-p)75Ω
(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
19 pin (HDMI standard, Type A)
x
2
x
1
2
x
2.0
Accessory:
RCA jack
(L, R)
x
1 / SCART
x
Scartcable.............................1
RFCoaxialCable................1
Remotecontrol..........................1
Batteries.......................2
Design
and
specifications
are
2
0.5 V
3 V
(p-p), 75 Ω, RCA jack x 1
(p-p), Optical connector x 1
Vrms (1 KHz, 0 dB), 600 Ω,
x
2 / SCART
subject
to
change
2
without notice.
59
P/NO:3834RD0100V
Download PDF