LG | LT-15A10 | LG LT-15A10 Owner’s Manual

LCD
Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0237P
(MF004A,
044L TX,
486-403B/D)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel
4
Basic
7
operation
Programme selection
Volume adjustment / Quick view / Mute function
Auto Demonstration / On screen language selection
On and off /
On
8
screen menus
Menu selection
TV stations
Auto programme tuning
Manual programme tuning
9
Setting up
Fine
Tuning
Programme edit
Calling the programme
table
Picture adjustment
Picture adjustment
14
Sound
15
adjustment
adjustment
Stereo/Dual reception
Sound
Sound
reception
Other functions
TV, AV and PC monitor modes / Child lock
Auto sleep / Sleep timer
17
Teletext (option)
Switch on / off
SIMPLE text
TOP text (option)
FASTEXT mode
Special teletext functions
19
Connection of external equipment
Aerial socket
Euro scart sockets
Audio/Video in sockets
S-video/Audio in sockets
Headphone socket
22
Connection of PC
Picture adjustment
24
PC in socket
(D-Sub jack)
Troubleshooting
2
/ NICAM
output selection
check list
26
Installation
Power
This set operates on a DC supply provided by the AC-DC adaptor,
the voltage is as indicated on the label on the back cover. Use only
the AC-DC
adaptor supplied
with the set and
never
apply
an
AC
mains to the set directly. The AC-DC adaptor operates on an AC
mains supply, the voltage is as indicated on the label of the AC-DC
adaptor.
a.
Connect the DC
the set.
plug
of the AC-DC
adaptor
to the 12V socket of
b. Connect the AC-DC
adaptor and it's power cord.
Connect the power cord to an AC mains.
In the event of thunderstorms or powercuts, please
a
bc
c.
mains
plug
anything to
of the AC-DC
adaptor
and the aerial
plug.
pull
out the
Do not allow
rest upon or roll over the power cord, and do not
the set where the power cord is subject to damage.
place
Warning
To
prevent fire
or
shock
moisture. Do not rub
hard
as
this may
or
hazard, do not expose the set to rain or
strike the Active Matrix LCD with anything
scratch,
mar,
or
damage
the Active Matrix LCD
permanently.
Service
Never
remove
the back
cover
of the set as this can expose you to
the set does not operate proper-
high voltage and other hazards. If
ly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back.
For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
or
heat. Also
ensure
that the
position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
This set can be positioned by using the table top stand or wall
mounting bracket (optional parts). When you install the set to use
the wall mounting bracket, fix it carefully so as not to drop.
placed
a
Cleaning
the set before cleaning the face of the LCD Screen. Dust
by wiping the screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
Unplug
the set
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
adjusted
with the buttons
on
the front
of the set.
Remote control handset
POWER
MUTE
1
1
2
3
Before you use the remote control
teries. See the next page.
1.
POWER
switches the set
2
4
5
6
7
8
9
2.
on
from
standby
or
off to
standby
or
directly
standby.
NUMBER BUTTONS
switches the set
on
from
select
a
number.
TV/AV/PC
MENU
0
3
3.
MENU
selects
4.
VOL
a menu.
SLEEP
PR
4
handset, please install the bat-
VOL
OK
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set
Q.VIEW
on from standby.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
Φ
LIST
PR
5
TEXT
MIX
Γ
OK
INDEX
i
TIME
/
accepts your selection
REVEAL MODE
or
displays
the current mode.
M
SIZE
HOLD
UPDATE
5.
Q.VIEW
returns to the
I/II
PSM
previously
viewed programme.
6
6.
I/II
selects the
7
language during dual language
output (option).
selects the sound
7.
PSM
(Picture Status Memory)
preferred picture setting.
recalls your
4
broadcast.
Location and function of controls
8.
MUTE
switches the sound
9.
off.
on or
TV/AV/PC
selects
TV, DVD, AV
clears the
menu
switches the set
or
PC monitor mode.
from the
on
from
screen.
standby.
POWER
MUTE
10. SLEEP
sets the
8
sleep
timer.
11. LIST
displays
the programme table.
12. TELETEXT BUTTONS
These buttons
For further
Note
:
are
details,
In teletext
(option)
used for teletext.
see
1
2
3
4
5
6
7
8
0
the 'Teletext' section.
mode, the SLEEP, LIST and Q.VIEW buttons
9
10
are
SLEEP
PR
used for teletext function.
VOL
Battery
9
TV/AV/PC
MENU
Q.VIEW
installation
VOL
OK
LIST
PR
11
The remote control handset is
powered by two AAA type batteries.
batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
To load the
TEXT
MIX
INDEX
i
TIME
M
-
SIZE
HOLD UPDATE
I/II
Note
:
To avoid
damage
from
batteries if you do not plan to
extended
period
possible battery leakage,
use
remove
12
REVEAL MODE
PSM
the
the remote control handset for
an
of time.
5
Location and function of controls
Front
You
panel
can use
the front
pressing.
10
1
11
2
TV/AV/PC
S-VIDEO
VIDEO
(MONO)
L
AUDIO
panel
buttons
34
MENU
OK
softly touching
5
them instead of
6
VOL
VOL
PR
78
PR
STAND-BY
R
AV
Back
panel
9
1.
MAIN POWER
(POWER
on (I) or
switches the set
2.
TV/AV/PC
selects TV,
clears the
I/O
off
10. HEADPHONE SOCKET
)
(O).
Connect the
headphone plug
11. AUDIO/VIDEO IN SOCKETS
DVD, AV
menu
switches the set
or
PC monitor mode.
from the
on
from
(AV)
Connect the audio/video out sockets of external
screen.
to this socket.
equipment
to these sockets.
standby.
S-VIDEO/AUDIO IN SOCKETS
3.
4.
MENU
selects
Connect the video out socket of
VCR to the S-VIDEO socket.
a menu.
mode.
or
displays
the current
5.
Φ / Γ
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
6.
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
7.
STAND-BY
( )
switches the set
on
from
standby
or
off to
standby.
POWER/STANDBY INDICATOR
illuminates
brightly
when the set is in
mode.
dims when the set is switched
9.
6
an
S-VIDEO
Connects the audio out sockets of the S-
OK
accepts your selection
8.
(SAV)
on.
REMOTE CONTROL SENSOR
standby
VIDEO VCR to the audio sockets
as
in AV.
Basic
operation
On and off
1.
2.
Press the main power button (I) to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε, TV/AV/PC
or NUMBER buttons on the remote control handset to switch it on
fully.
3.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
4.
Press the main power button
(O)
to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You
a
can
select
programme number with the
Δ
/
Ε
or
POWER
MUTE
1
2
3
4
5
6
7
8
NUMBER
buttons.
Volume
adjustment
Press the
Φ
/
button to
Γ
9
TV/AV/PC
MENU
0
adjust
the volume.
PR
Quick view
VOL
Press the Q.VIEW button to view the last programme you
were
OK
Q.VIEW
VOL
PR
watching.
Mute function
Press the MUTE button. The sound is switched off and the
display
W
appears.
You can cancel it
by pressing
the
MUTE,
Φ
/ Γ, I/II button.
I/II
Auto Demonstration
To review all the
programmed in the set, press the OK butcontrol for about 5 seconds. To stop auto
demonstration, press any button of the front panel control and
POWER button of the remote control.
ton of the front
On
screen
The
menu
language
can
First select your
1.
2.
3.
4.
5.
menus
panel
be
selection
displayed
language.
on
the
screen
in desired
language.
Press the MENU button to select the Station menu.
Press the Δ / Ε button to select Language.
Press the OK button.
Press the Δ / Ε button to select your desired
Press the OK button.
language.
All the
6.
on screen displays will appear in the selected language.
Press the TV/AV/PC button to return to normal TV viewing.
7
On
screen menus
The
an
also
between you and your set takes place on screen with
The buttons required for the operating steps are
dialogue
operator
menu.
displayed.
Menu selection
press the MENU button to display each menu.
Press the Δ / Ε button to select a menu item.
The selected menu item changes from white to red.
3.
Press the Φ / Γ button to change the setting of a menu item or
OK button to display the sub menu.
Note :
a.
In the AV mode, the Station menu is not displayed.
b. In the teletext mode, menus are not displayed.
c.
In some models, the Normal/Turbo search will not display,
the Start will display in the Auto programme menu.
1.
2.
Repeatedly
MENU
BG
1
System
StorageOfrom
AutoOprogramme
ManualOprogramme
NormalOsearch
TurboOsearch
ProgrammeOedit
Language
PR
()OOKOMENUO
VOL
OK
()O}{OMENUO
VOL
Station
menu
PR
Contrast
Brightness
Colour
Sharpness
Tint
100
95
85
80
0
()O}{OOKOMENUO
Channel
V
BG
UHFO1
Fine
Search
Name
Storage
{{{
CO01
1
()O}{OOKOMENUO
Picture
menu
0OOOOCR01OOOOOO5OOSR 07
1OOCD05
OOOO6OOSR 07
OEqualizer
OBalance
OAVL
System
0
Off
O
2OOOOCR07OOOOOO7OOCR 12
3OOOOSR02OOOOOO8OOCR 15
4OOOOCR06OOOOOO9OOSR 05
OODeleteO O Copy
OOMoveO OOOOSkip
()OOKOMENUO
()O}{OOKOMENUO
Sound
Input
ChildOlock
AutoOsleep
menu
TV
Off
Off
FlatOOOO
Music
Movie
Speech
User
OOOOOOOO0.1O0.5O1.5O5.0O10OkHzO
()O}{OMENUO
Special
TV programme
8
()OMENUO
menu
Setting up
TV stations
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use
the Δ / Ε or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
tuning
()OOKOMENUO
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this
set.
1.
2.
3.
press the MENU button to select the Station menu.
Press the Δ / Ε button to select Auto programme.
Press the OK button to display the Auto programme menu.
Repeatedly
BG
1
System
StorageOfrom
NormalOsearch
TurboOsearch
1
2
3
4
5
6
7
8
4.
5.
6.
7.
8.
0
Press the Δ / Ε button to select System. Select a TV system
with the Φ / Γ button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines)
Press the Δ / Ε button to select Storage from.
Select the beginning programme number with the Φ / Γ button
or NUMBER buttons. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Normal or Turbo search.
Option:
In
some
models, you
can
9
TV/AV/PC
MENU
()O}{OOMENUO
only
PR
VOL
OK
VOL
PR
select Start.
Note :
a.
Turbo search is further faster than Normal search and
in some models, these searches will automatically store all
receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
Press the OK button to begin auto programming.
System
StorageOfrom
NormalOsearch
TurboOsearch
1
BG
1
CO15
2%
MENUO
(Normal search)
System
StorageOfrom
BG
1
NormalOsearch
TurboOsearch
CO38
1
2%
MENU
(Turbo search)
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
Press the TV/AV/PC button to return to normal TV
viewing.
9
TV stations
Setting up
Station
Menu
Manual programme
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name
with five characters to each programme number.
()OOKOMENUO
1.
Repeatedly
2.
Press the
3.
Δ
press the MENU button to select the Station menu.
/ Ε button to select Manual programme.
Press the OK button to
display
the Manual programme
menu.
1
2
3
4
5
6
7
8
9
System
Channel
V
Fine
BG
UHFO1
{{{
Search
Name
CO01
1
Storage
()O}{OOKOMENUO
MENU
4.
Press the Δ / Ε button to select System. Select
with the Φ / Γ button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines)
5.
Press the Δ / Ε button to select Channel. Press the Φ / Γ
button to select V/UHF or Cable as required.
If possible, select the channel number (1 to 69) directly with the
0
PR
VOL
OK
VOL
PR
number buttons.
6.
Any
a
TV
number under 10 is entered with
system
a numer-
ic '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Search. Press the Φ / Γ button to commence searching. If a station is found the search will
stop.
7.
If this station is the
Storage.
the
Φ
/
Γ
one required, press the Δ / Ε button to select
Select the desired programme number (0 to 99) with
button or NUMBER buttons. Any number under 10 is
entered with
8.
a
numeric '0' in front of
Press the OK button to store it. The
System
Channel
Fine
Search
Name
Storage
V
it, i.e. '05' for
BG
UHFO1
{{{
CO01
1
Stored
9.
10
To store another
5.
display Stored will
station, repeat steps
4 to 8.
appear.
TV stations
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
3.
Δ / Ε button to select Name.
Press the Γ button. You can use a blank, +,
and the alphabet A to Z.
Station
Menu
1 to 3.
Press the
-,
the numeric 0 to 9
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
4.
Φ button
you can select in the opposite direction.
Select the next position by pressing the OK button and then take
your choice of the second character, and so on.
5.
Repeat
With the
the 'Manual programme
7 to 8.
tuning' steps
Press the TV/AV/PC button to return to normal TV
Fine
viewing.
tuning
Normally
fine
tuning
is
only
necessary if
reception
the 'Manual programme tuning'
Δ / Ε button to select Fine.
1.
Repeat
2.
Press the
steps
()OOKOMENUO
is poor.
1 to 3.
1
2
3
4
5
6
7
8
MENU
9
TV/AV/PC
0
System
Channel
V
Fine
Search
Name
Storage
BG
UHFO1
PR
{{{
CO01
1
VOL
OK
VOL
()O}{OOKOMENUO
PR
3.
Press the
Φ
/
Γ
button to fine tune for the best
picture
and
sound.
4.
5.
the 'Manual programme tuning' steps 7 to 8.
Press the TV/AV/PC button to return to normal TV viewing.
Repeat
The
finely tuned programme will
during programme selection.
be indicated
by yellow
number
11
TV stations
Setting up
Station
Menu
Programme
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
()OOKOMENUO
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert
a
blank station data into the selected programme number.
press the MENU button to select the Station
/ Ε button to select Programme edit.
1.
Repeatedly
2.
Press the
3.
Press the OK button to
Δ
display
the
Programme edit
menu.
menu.
0OOOOCR01OOOOOO5OOS R07
1 OOCD05
OOOO6OOS R07
2OOOOCR07OOOOOO7OOC R12
3OOOOSR02OOOOOO8OOC R15
4OOOOCR06OOOOOO9OOS R05
1
2
3
4
5
6
7
8
9
OODeleteO O Copy
OOMoveO OOOOSkip
()O}{OOKOMENUO
MENU
TV/AV/PC
Deleting
1.
2.
0
programme to be deleted with the
Press the RED button twice.
Copying
1.
OK
programme
a
The selected programme is deleted,
grammes are shifted up one position.
PR
VOL
a
Select
VOL
2.
Δ
/
Ε or Φ
all the
/
Γ
button.
following
pro-
a
programme
programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
Select
a
or Φ
one
/
button.
Γ
position.
PR
Moving
1.
2.
3.
a
programme
programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
Select
a
theΔ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
again
to release this function.
0OOOOCR01OOOOOO5OOS R07
1 OOCD05
OOOO6OOS R07
2OOOOCR07OOOOOO7OOC R12
3OOOOSR02OOOOOO8OOC R15
4OOOOCR06OOOOOO9OOS R05
OOMoveRoff
()O}{OMENUO
Skipping
a
Select
a
1.
programme number
programme number to be
skipped
with the
Δ
/ Ε
or Φ
/
Γ
button.
2.
3.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
gramme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV/PC button to return to normal TV
12
viewing.
Setting up
TV stations
the programme table
Calling
You can check the programmes stored in the memory
the programme table.
Displaying programme table
Press the LIST button to display
the
by displaying
Programme table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
0OOOOCR01OOOOOO5OOS R 07
1OOCD05
OOOO6OOS R 07
2OOOOCR07OOOOOO7OOC R 12
3OOOOSR02OOOOOO8OOC R 15
4OOOOCR06OOOOOO9OOS R 05
()O}{OOKOMENUO
Note
:
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
programme in the programme table
programme with the Δ / Ε or Φ / Γ button.
Selecting
Select
a
a
Then press the OK button.
The set switches to the chosen programme number.
Paging through
There
are
a
TV/AV/PC
PR
VOL
OK
PR
VOL
LIST
programme table
10 programme table pages in which contain 100 pro-
grammes.
Pressing the
Δ
/ Ε
or Φ
/
Γ
button
repeatedly
turns the pages.
Press the TV/AV/PC button to return to normal TV
viewing.
13
Picture
Picture
Menu
Picture
Contrast
100
95
85
80
0
Brightness
Colour
Sharpness
Tint
()O}{OOKOMENUO
You
can
ness
adjustment
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
press the MENU button to select the Picture menu.
/ Ε button to select the desired picture item.
Press the Φ / Γ button to make appropriate adjustments.
1.
Repeatedly
2.
Press the
3.
Δ
Contrast
Brightness
Colour
Sharpness
Tint
4.
Press the OK button to store it for the
The
MENU
100
95
85
80
0
display Stored
picture User.
appears.
TV/AV/PC
Press the TV/AV/PC button to return to normal TV
PR
VOL
appears. The
VOL
OK
PR
PSM
14
viewing.
To recall your preferred setting, press the PSM button until the
desired picture (Dynamic, Standard, Mild, Game or User)
picture Dynamic, Standard, Mild and Game are
programmed for good picture reproduction at the factory and cannot be changed.
Sound
Sound
You
adjustment
Sound
Menu
adjustment
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer,
balance. If you switch AVL to on, the set automatically keeps on an
equal volume level even if you change programmes.
can
Speech
1.
2.
3.
press the MENU button to select the Sound menu.
Press the Δ / Ε button to select the desired sound item; Equalizer,
Balance or AVL.
Press the Φ / Γ button to make desired adjustment.
Press the OK button in Equalizer to set the Equalizer User.
OEqualizer
OBalance
OAVL
0
Off
O
()OOKOMENUO
Repeatedly
FlatOOOO
Music
Movie
Speech
User
OOOOOOOO0.1O0.5O1.5O5.0O10OkHzO
()OMENUO
MENU
Press the
Δ
/
Ε
button to select your
Speech or User.
preferred setting
;
TV/AV/PC
Flat,
Music, Movie,
To set the Equalizer User,
Select User by pressing the Δ / Ε button.
b. Select a sound band by pressing the Φ / Γ button.
c. Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
The display Stored appears.
PR
a.
Press the TV/AV/PC button to return to normal TV
VOL
OK
VOL
PR
viewing.
The sound Flat, Music, Movie and Speech are programmed for
good sound reproduction at the factory and cannot be changed.
15
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
for dual language broadcast
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
Language selection
If
a
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
I/II
2.
3.
When
NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
16
:
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
Other functions
TV, AV and PC monitor modes
Inputs
when
can
a
be set for
TV, AV
or
Special
Menu
PC monitor mode. AV mode is used
video cassette recorder
(VCR),
other
or
equipment
is
con-
TV
Off
Off
Input
ChildOlock
AutoOsleep
nected to the set.
()O}{OMENUO
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
press the MENU button to select the Special menu.
/ Ε button to select Input.
Φ / Γ button to select TV, DVD, AV, SAV or PC.
1.
Repeatedly
2.
Press the
Press the
3.
Δ
The AV mode and external
DVD
equipments
are :
:
COMPONENT connected to the COMPONENT INPUT
socket of the set
1
2
3
AV
:
VCR connected to the AV of the set
4
5
6
SAV
:
S-VIDEO VCR connected to the S-VIDEO sockets of the set
PC
:
7
8
PERSONAL COMPUTER connected to the PC socket
of the set
MENU
9
TV/AV/PC
0
To return to TV
mode, press the
Δ
/
Ε or
Alternatively you can select the TV, DVD,
by pressing the TV/AV/PC button.
NUMBER buttons.
AV
or
PC monitor mode
PR
VOL
Child lock
VOL
PR
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
press the MENU button to select the Special menu.
/ Ε button to select Child lock.
/ Γ button on the remote control handset to select On.
1.
Repeatedly
2.
Press the
3.
Press the
4.
Press the TV/AV/PC button to return to normal TV
Δ
Φ
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the front panel is pressed while displaying the menus.
17
Other functions
Special
Auto
Menu
TV
Off
Off
Input
ChildOlock
AutoOsleep
sleep
If you select Auto sleep On the set will automatically switch itself
standby mode approximately ten minutes after a TV station stops
to
broadcasting.
()O}{OMENUO
press the MENU button to select the
/ Ε button to select Auto sleep.
Φ / Γ button to select On.
1.
Repeatedly
2.
3.
Press the
Press the
4.
Press the TV/AV/PC button to return to normal TV
Sleep
Special
menu.
Δ
viewing.
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
preset time elapses.
Press the SLEEP button to select the number of minutes. The disMENU
TV/AV/PC
0 will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
PR
SLEEP
Note :
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
0 appears.
c.
When you switch the set off, the set releases the preset sleep
time.
a.
VOL
VOL
PR
18
Teletext
Teletext
(or
TOP
with the teletext
Teletext is
a
text)
is
system
an
can
optional function,
information
grammes, share
prices
therefore
only
a
set
receive the teletext broadcast.
free service broadcast
up-to-the-minute
(option)
on
by
most TV stations which
news,
and many other
The teletext decoder of this TV
can
gives
weather, television pro-
topics.
support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corre-
sponding
methods
page number. TOP and FASTEXT are more modern
and easy selection of teletext information.
allowing quick
1
2
3
4
5
6
7
8
Switch on/off
Press the TEXT button to switch to teletext. The initial page
page appears on the screen.
or
last
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page nimber indicates your selec-
9
TV/AV/PC
0
tion, while the second shows the
Press the TEXT
or
current page displayed.
TV/AV/PC button to switch off teletext. The pre-
vious mode reappears.
PR
OK
SIMPLE text
PR
Page selection
1.
2.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the
lowing
TEXT
MODE
preceding
or
fol-
M
page.
Programming
a
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
or
FASTEXT
mode, press the
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
2.
buttons, select the page you wish to programme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
can select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
3.
4.
Using
a
coloured button.
the NUMBER
19
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
1
2
3
3.
With the green button you can proceed to the next
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4.
The
red
button
the
Alternatively
4
5
6
7
8
9
to
permits
Ε
button
can
return
to
previous
existing
selection.
be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
0
FASTEXT
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
Page selection
1.
INDEX
2.
i
Press the
i
button to select the index page.
select the pages which are colour coded
tom line with the same coloured buttons.
You
can
3.
Corresponding to the SIMPLE
page by entering its three digit
4.
The
along
the bot-
teletext mode, you can select a
page number with the NUMBER
buttons in FASTEXT mode.
Δ
lowing
20
/ Ε
button
page.
can
be used to select the
preceding
or
fol-
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
the TV
picture
on
the
screen
teletext page. The display
corner of the screen. When the
while
waiting
for the
1
2
3
4
5
6
7
8
9
new
0
will appear at the top left hand
updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
PR
HOLD
Stops
the automatic page
text page consists of 2
change
which will
occur
if
a
tele-
PR
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
or more
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
MIX
TIME
REVEAL
SIZE
HOLD
screen
UPDATE
MIX
Displays
the teletext pages superimposed on the TV
picture off press this button again.
picture.
To switch the TV
TIME
When
viewing
a
the time at the
button
again
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
again
RED/GREEN,
Δ
/
Ε
or
to exit this function.
21
Connection of external
You
can
connect additional
etc. to your set.
Examples
equipment
such
shown below.
equipment,
are
as
VCRs, camcorders
Aerial socket
VCR
1.
Connect the RF out socket of the VCR to the aerial socket
the back of the set.
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel on a desired programme number
the 'Manual programme tuning' section.
4.
Select the programme number where the VCR channel
stored.
Press the PLAY button on the VCR.
5.
Component
on
using
is
in sockets
1.
Connect the COMPONENT video output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the COMPONENT to the COMPONENT
2.
Connect the audio cable from the COMPONENT to the AUDIO
INPUT sockets
(Y
Pb
Pr)
of the set.
sockets of the set.
COMPONENT
(DVD)
3.
Press the TV/AV/PC button to select DVD.
4.
Press the PLAY button on the COMPONENT.
The COMPONENT playback picture appears on the
screen.
Audio/Video in sockets
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
VCR
22
2.
Press the TV/AV/PC button to select AV.
3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the
screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L (MONO) socket of the set.
Connection of external
S-Video/Audio in sockets
When
connecting
picture quality will
1.
an
(S-AV)
S-VIDEO VCR to the S-VIDEO
be further
equipment
socket, the
improved.
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
3.
Select SAV
4.
Press the PLAY button on the VCR.
The VCR playback picture appears on the
Headphone
by pressing
the TV/AV/PC button
S-VIDEO VCR
repeatedly.
screen.
socket
Insert the
headphone plug to the headphone socket of the set. You
through the headphone and TV's speaker.
To adjust the headphone volume, press the Φ / Γ button. If you
press the MUTE button, the sound from the headphone and TV's
speaker are switched off.
can
listen to the sound
23
Connection of PC
Picture
You
can
adjustment
adjust picture contrast, brightness,
tion, clock, clock phase, auto-configure and
1.
Repeatedly
horizontal/vertical
reset
as
you
posiprefer.
press the TV/AV/PC button to select the PC moni-
tor mode.
2.
Press the MENU button to select the Picture
OInput
PC
O'
60
OΩ
90
0
O
menu.
0
O
OClock
OClockOOphase
40
16
OAuto_configure
OReset
()O}{OOKOMENUO
MENU
MENU
3.
Press the
Δ
4.
Press the
Φ
/
/
Ε
button to select the desired
Γ
button to make
picture item.
appropriate adjustments.
TV/AV/PC
/
(Horizontal Position/Vertical Position)
This function is to adjust picture to left/right and up/down
as
you
prefer.
PR
Clock
VOL
VOL
OK
This function is to minimize any vertical bars or stripes visible on
screen background. And the horizontal screen size will also
the
change.
PR
Clock Phase
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
Auto-configure
This function is for the automatic
adjustment
of the
screen
posi-
tion, clock and clock phase. The displayed image will disappear
PSM
for
a
few seconds while the
Auto-configuration
is in process.
Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and clock phase manually.
Reset
This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed.
5.
Press the OK button to store it for the PC monitor
picture.
The
6.
24
display Stored appears.
Repeatedly press the TV/AV/PC
viewing.
button to return to normal TV
Connection of PC
PC in socket
1.
2.
3.
4.
(D-Sub jack)
Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the PC input socket of the set.
Connect the audio cable from the PC to the AUDIO sockets of
the set.
Press the TV/AV/PC button to select PC.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
PERSONAL COMPUTER
Note :
If you have an Apple macintosh, connect the VGA desktop
block from the 3 row 15 pin to 2 row 15 pin with the signal cable
and connect the VGA desktop block to the Macintosh.
b.
The cables are not supplied, such as the signal cable, audio
cable, VGA desktop block, etc.
a.
Displayable Monitor Specification
MODE
VGA
SVGA
(MAC)
XGA
Resolution
Horizontal
V ertical
Frequency(KHz)
Frequency(Hz)
640x480
31.5KHz
60Hz
640x480
35KHz
67Hz
640x480
37.9KHz
72Hz
640x480
37.5KHz
75Hz
640x480
43.3KHz
85Hz
720x400
31.5KHz
70Hz
800x600
35.2KHz
56Hz
800x600
37.9KHz
60Hz
800x600
48.1KHz
72Hz
800x600
46.9KHz
75Hz
800x600
53.7KHz
85Hz
832x624
49.7KHz
75Hz
1024x768
48.4KHz
60Hz
1024x768
56.5KHz
70Hz
1024x768
60.2KHz
75Hz
1024x768
68.7KHz
85Hz
Note :
If the set is cold, there may be a small "flicker" when the set is
switched on. This is normal, there is nothing wrong with the set.
b.
If possible, use the VESA 1,024x768@60Hz video mode to
obtain the best image quality for your LCD monitor. If used under
the other resolutions, some scaled or processed pictures may
appear on the screen. The set has been pre-adjusted to the
mode VESA 1,024x 768@60Hz.
c.
Some dot defects may appear on the screen, like Red, Green or
Blue spots. However, this will have no impact or effect on the
monitor performance.
d. Do not press the LCD screen with your finger for a long time as
this may incur some afterimages.
e.
When the PC screen appears on the set, some message may be
appear on the screen, and the message is different depend on
Window system version (Win98, 2000). If some message appear,
click the "Next" continuously until appear finish message.
a.
25
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Incorrect
position
Vertical bars
or
stripes
on
background
Horizontal noise
Signal
Cable message appears
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Auto-configure
adjust
(VCR only)
the H/V
position
Auto-configure
or
adjust
Clock
Auto-configure
or
adjust
Clock Phase
Is the
26
or
Signal
Cable connected
or
loose
Download PDF