Package
Air
Conditioner
OWNER'S
MANUAL
Before
manual
using your air conditioner please read this
carefully and keep it for future reference.
Prior to
installation, this air-conditioning unit
be submitted for
which
must
approval by the utility service
provides electricity (EN 61000-3 Norm).
ENGLISH
Safety precautions
Safety Precautions
SafetyPrcuions
Features and
to the
other
user or
people
and
property damage, the
instructions must be followed.
Incorrect
operation
damage,
the seriousness is classified
Operating Instructions
due to
ignoring
of instruction will
cause
by the following
harm
or
indications.
WARNING
WARNING
Specifications ....4
This
Indoor Unit Controls and
symbol
indicates the
possibility
of death
or
serious
possibility
of
or
damage
injury.
Indicators ..............................5
CAUTION
CAUTION
Name and Function-Remote
Control...................................6
This
symbol indicates
properties only.
operation.......8
Care and Maintenance
the
Installation
Care and Maintenance .......18
Operation Tips
....................18
injury
to
precautions
WARNING
WARNING
Do not
Before You
install, remove and re-install the unit by yourself.
Improper installation will cause water leakage, electrical shock, or
fire. Please consult authorized dealer or specialist for the installation
Call For Service ...............19
work.
Troubleshooting tips
WARNING
WARNING
Do not
damage
or use an
Do not
unspecified
operate with
wet hand.
power cord.
?
It will
cause
electrical shock
Do not insert
or
fire.
anything into the
?
air inlet/air
?
Since the fan rotates at
When
cause
electrical shock.
Do not expose the skin directly to cool air
long periods of time.
an
injury
or
high speed,
damage the unit.
abnormality (smell
of
this may
If the unit continues to
condition, it may
cause
This could
?
burning, etc)
Repair
occurs, stop the air conditioner, and
disconnect the power plug or turn off the
circuit breaker.
?
It will
for
outlet.
cause an
Troubleshtingp
prevent injury
following
Caution .................................3
Air conditioner
OperatingIsuco
CarendMitc
To
................................2
Warning
or
damage
your health.
relocation should not be done
by
the customer.
operate in an abnormal
fire, damage, etc. In
?
If this is done
electric
this case, consult your dealer.
water
2
incorrectly, it may cause a fire,
shock, injury by dropping of the unit,
leakage,
etc. Consult your dealer.
CAUTION
?
Contact the authorized Service technician for
?
Contact the installer for installation of this unit.
?
The air conditioner is not intended for
?
The
?
?
repair or maintenance of this
unit.
use by young children or infirm persons without supervision.
appliance is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure that they do not play with the appliance.
If the supply flexible cord is damaged, it must be replaced by the manufacturer or the manufacturer's
service agent or similary qualified person in order to avoid hazard.
CAUTION
CAUTION
When the air filter is to be
Do not clean the air
Ventilate well when used
removed, do not touch the
metal parts of the indoor unit.
conditioner with water.
together with
?
?
It may cause an injury.
Should be disconnected from
?
supply
When the unit is to be
cleaned, switch off,
Do not
and turn
It may
cause an
electric
Do not
a
pet
or
?
exposed
Do not leave
an
on
stand which is
shock,
?
This could
injure
the
pet
or
?
plant.
apply
shortage
may
occur.
house
be
An oxygen
installation
damaged.
to direct air flow.
burning.
or
put
plant where it will
off the circuit breaker.
?
Water may enter the unit and
degrade the insulation. It may
cause an electric shock.
stove, etc.
a
Do not
insecticide
flammable spray.
is
put
exposed
a
stove, etc. where
The unit may drop or fall down
and cause an injury.
Do not
to direct air flow.
not
?Itmaycauseafireor
?
It may affect combustion.
step
on
the
indoor/outdoor unit and do
?
deformation of the cabinet.
put anything
It may
on
it.
injury through
falling down.
cause an
dropping
or
Do not insert your finger or
stick etc. into the air inlet
When the unit is not
Do not open the air inlet
be used for
during operation.
grille.
off the circuit breaker.
?
It will
shock
Do not
?
use
Do not
for
?
If not, dirt may collect and
fire.
deterioration of
quality,
?
It may
shock
grille
cause an injury, electric
by the high voltage.
Do not operate for a long time in high
humidity, e.g. leaving a door or window open.
special purposes.
this air conditioner to preserve
devices, food, animal, plants, and art
cause
going to
long time, turn
cause a
use
precision
objects.
It may
electric
injury,
by the high voltage.
cause an
a
?
In the
with
etc.
3
cooling mode, if it is operated in a room
high humidity (80%RH or more) for a long
time,
water condensed in the air conditioner may
drop
and may wet and
spoil furniture,
etc.
ENGLISH
Features and
SafetyPrcuions
Specifications
Features
6. Removable air filter
1. Designed for cooling and
heating
7. Anti-Bacteria filter
2. Super energy efficiency
8. 3 minutes delay circuit
3. Micom control
9. 3 Cooling/Heating speeds
OperatingIsuco
CarendMitc
Troubleshtingp
4. Whisper quiet operation
10. Plasma Air Purifying system
5. Wireless remote control
Specifications
Air Outlet Vent
Air Intake Vent
(Rear)
Air Outlet
Vent
Remote
Signal
Receptor
Air Intake Vent
Piping
4
Indoor Unit Controls and Indicators
The remote control transmits the
signals
to the
system.
Features of the Remote Control- Door Closed
8
61
7
3
ROOM TEMP.
12 14 15
8
61
7
3
SET TEMP.
ROOM TEMP.
A/CL
A/CL
A/CL
M
LH
OUT
OUT
DOOR
MODE
5
9
10
SET TEMP.
A/CL
M
LH
17
ENGLISH
1 2 14
DOOR
MODE
23
51 1
41 61
234
16
1
(Cooling Model)
(Heat Pump Model)
1. START/STOP BUTTON
10. DEFROST OPERATION LAMP
Operation starts when this button is
pressed and stops when the button is
pressed again.
11. AUTO OPERATION LAMP
12. OFF TIMER OPERATION LAMP
2. OPERATION MODE SELECTION
BUTTON
Used to select the
13. AUTO AIRFLOW OPERATION LAMP
operation
Mode.
3. ROOM TEMPERATURE SETTING
(HORIZONTAL)
14. AIR CLEANER OPERATION LAMP
BUTTONS
Used to select the
(OPTIONAL)
room
temperature.
15. ELECTRIC HEATER OPERATION
4. INDOOR FAN SPEED SELECTION
Used to select fan
speed
in three
LAMP
steps-
low, med, high.
5. AIR CLEANER OPERATION BUTTON
16. OUTDOOR UNIT OPERATION LAMP
17. ELECTRIC HEATER OPERATION
(OPTIONAL)
BUTTON
6. FAN OPERATION LAMP
7. COOLING OPERATION LAMP
8. SOFT DRY OPERATION LAMP
9. HEATING OPERATION LAMP
5
(OPTIONAL)
Name and Function-Remote Control
Control
SafetyPrcuions
1.
1
?
to the
package
air
conditioner
2.
2
Operation Display
of the Remote Control
3. Indoor Fan
A/CL
?
10
11
9
4
14
OperatingIsuco
CarendMitc
Troubleshtingp
Signal Transmitter
Transmits the signals
7
8
3
6
Speed Selection Button
speed in three steps
[Low, Med, High]
To select the desired fan
ON Button
4.
Cooling
5.
Temperature Setting Buttons
6. Power ON/OFF Button
?
5
Operation will start when this button is
pressed, and stop when the button is pressed
again.
7. Timer Set Button
(Cooling Model)
?
Each time the button is
pressed, the
following process.
(1, 2, 3, 4, 5, 6, 7 hours)
mode is
in the
changed
1
Timer set
If you select "0:00" the off Timer function will
2
be cancelled.
13
8. Auto Airflow Direction Control Button
A/CL
11
10
4
12
3
The vertical louvers
?
The horizontal louvers
swing
can
left and
be set
Operation Button
(Cooling Model Only)
8
10. Plasma Air
purifying Button (Optional)
6
11. Indoor Fan
Operation Button
5
12.
Heating Button (Heat Pump
Model
13. Electric Heater ON/OFF Button
(Heat pump Model)
14. Soft
Handling
?
?
?
?
Only)
(Optional)
Dry Operation Button
Wireless Remote Control Puts all functions at your
?
right.
by hand.
9. Auto
14
7
?
fingertips
the remote control
Aim at the
signal receptor on the package air conditioner when operating.
The remote control signal can be received at a distance of up to about 7meters.
Be sure that there are no obstructions between the remote control and the signal receptor.
Do not drop or throw the remote control.
Do not place the remote control in a location exposed to direct sunlight, or next to a heating unit,
other heat
source.
6
or
Remote Control
Preparation
How to mount onto
1
Use the
to
screws
secure
a
wall
the holder to the wall
or
attach the holder side of indoor
unit.
2
To insert the remote control to the holder.
Insert
Pull
How to insert batteries
Remove the
cover
?
from the
?
Slide the
the
cover
according
are
to
Be
sure
that the
directions
?
Be
sure
are
(+)
and
different from
(-)
?
correct.
Change
if the remote
control does not work
properly
Re-attach the
Slide the
the batteries with
a new one
that both batteries
are new.
?
rechargeable
dry cells in
shape, dimensions, and
performance.
Insert two batteries.
?
use
standard
direction.
arrow
Do not
batteries such batteries
back of the remote controller.
cover
after
extended
cover.
into back
position.
7
using for an
length of time.
ENGLISH
Air conditioner
SafetyPrcuions
How to
1
?
the
use
Each time the
shifted in the
Operation
arrow
operation
Mode Selection Button is
Troubleshtingp
the
pressed,
Operation
Mode is
direction.
MODE
ROOM TEMP.
OperatingIsuco
CarendMitc
Mode Button
Operation
SET TEMP.
ROOM TEMP.
M
SET TEMP.
ROOM TEMP.
M
LH
M
LH
OUT DOOR
Cooling Operation
SET TEMP.
LH
OUT DOOR
Soft
OUT DOOR
Dry Operation
Heating Operation
(Heat pump Model)
MODE
ROOM TEMP.
SET TEMP.
ROOM TEMP.
M
SET TEMP.
ROOM TEMP.
M
LH
LH
OUT DOOR
LH
OUT DOOR
Auto
Cooling Operation
SET TEMP.
M
OUT DOOR
Soft
Operation
Dry Operation
(Cooling Model)
2
How to
?
use
Each time the Fan
the Fan
speed
speed Button
Button is
pressed,
the Fan
speed
is shifted in the
arrow
direction.
MODE
M
8
LH
LH
M
LH
M
High
Low
Medium
Cooling Operation
3
1
2
Press the
Select
Start/Stop
Mode
ENGLISH
Button.
Cooling Operation.
Operation Mode Selection Button.
the Cooling Operation Button on the remote
Press the
Press
controller.
MODE
ROOM TEMP.
SET TEMP.
A/CL
M
LH
OUT DOOR
3
Set the
The
temperature lower than the room temperature.
temperature can be set within a range of 16°C~30°Cby 1°C.
MODE
ROOM TEMP.
To raise the
temperature
To lower the
temperature
SET TEMP.
M
LH
4
Set the Fan
OUT
DOOR
Speed.
MODE
?
Each time the Button is
pressed,
the Fan
is shifted.
9
Speed
mode
SafetyPrcuions
OperatingIsuco
CarendMitc
Troubleshtingp
Soft
4
1
2
Dry Operation
Press the
Start/Stop
Button.
Select Soft
Press the
Press the
Dry Operation.
Operation Mode Selection Button.
Soft Dry Operation Button on the remote
controller.
MODE
ROOM TEMP.
SET TEMP.
A/CL
M
LH
OUT DOOR
3
Set the
The
temperature lower than the room temperature.
temperature can be set within a range of 16°C~30°Cby 1°C.
MODE
ROOM TEMP.
To raise the
temperature
To lower the
temperature
SET TEMP.
M
LH
During soft Dry Operation
?
The indoor fan
speed
is
automatically
10
set to low.
OUT DOOR
Model Only)
5 Heating Operation Mode(Heat Pump
1
2
Press the
Select
Start/Stop
ENGLISH
Button.
heating Operation.
Operation Mode Selection Button.
the heating Operation Button on the remote
Press the
Press
controller.
MODE
ROOM TEMP.
SET TEMP.
A/CL
M
LH
OUT DOOR
3
Set the
The
temperature upper than the room temperature.
temperature can be set within a range of 16°C~30°Cby 1°C.
MODE
ROOM TEMP.
To raise the
temperature
To lower the
temperature
SET TEMP.
M
LH
4
Set the Fan
OUT
DOOR
Speed.
MODE
?
Each time the Button is
the Fan
11
Speed
pressed,
mode is shifted.
SafetyPrcuions
OperatingIsuco
CarendMitc
Troubleshtingp
Electric Heater
6
1
2
Press the
Select
Start/Stop
Operation Mode(Option)
Button.
heating+ E/heater Operation.
Operation Mode Selection Button.
the Heater Operation Button on the remote controller.(When the unit operates in heating mode.)
Press the
Press
MODE
ROOM TEMP.
SET TEMP.
A/CL
M
LH
OUT DOOR
3
Set the
The
temperature upper than the room temperature.
temperature can be set within a range of 16°C~30°Cby 1°C.
MODE
ROOM TEMP.
To raise the
SET TEMP.
temperature
M
LH
To lower the
4
Set the Fan
temperature
OUT
DOOR
Speed.
MODE
?
Each time the Button is
the Fan
12
Speed
pressed,
mode is shifted.
Auto
7
Operation Mode(Cooling
Press the
1
Start/Stop
Model
Only)
ENGLISH
Button.
Select Auto
2
Operation.
Operation Mode Selection Button.
Auto Operation Button on the remote controller.
Press the
Press
MODE
ROOM TEMP.
SET TEMP.
A/CL
M
LH
OUT DOOR
Set the
3
The
temperature upper than the room temperature.
temperature can be set within a range of 16°C~30°Cby 1°C.
MODE
ROOM TEMP.
SET TEMP.
Cold Cool
M
LH
Proper
Warm Hot
OUT DOOR
(This
indication will be shifted to the initial Auto Mode
after 4
To raise the
To lower the
Display
seconds.)
temperature. (When you feel
temperature. (When
too cool
you feel too
or
cold)
warm or
hot)
During Auto Operation
?
It is
impossible
best condition
to switch the indoor fan
by fuzzy
speed
rule.
13
because of
being already
set to the
state
SafetyPrcuions
Fan
8
Operation
Press the
1
Mode
Start/Stop
2
Button.
Press Fan
Operation
Button.
ROOM TEMP.
A/CL
M
LH
OperatingIsuco
CarendMitc
Troubleshtingp
Set the Fan
3
Speed.
Each time the Button is
the Fan
Speed
pressed,
mode is shifted.
Airflow Direction Procedure
9
1
Press the
Start/Stop
2
Button.
Press the Auto
louvers will
Swing Button and
swing left and right.
then
Press the Airflow Direction
Control Button
again
to set
the Vertical louver at the
desired airflow direction.
(Operation will start when the button is
pressed, and stop when the button is pressed
again.)
The vertical louver
swing
left and
right.
Note
Always
use
the remote control to
direction louver
by
hand could
adjust the right/left airflow direction, manually moving
change the air conditioner.
the vertical airflow
Vertical Airflow Direction Control
Adjust the
vertical airflow direction
manually by moving
14
the horizontal louvers with hand.
OFF Timer Setting
10
1
2
Press the
Start/Stop
Procedure(OFF TIMER Setting,
or
CANCEL)
ENGLISH
Button.
Press the Timer Button.
ROOM TEMP.
SET TEMP.
M
LH
OUT DOOR
3
?
If you press the
?
If you select
button, the selected off timer is displayed
'
as
follows;
', the Off Timer function will be cancelled.
When you finish the Off Timer
ROOM TEMP.
setting,
the Timer indicator
SET TEMP.
lights
ROOM TEMP.
off.
SET TEMP.
After 4 seconds
M
M
LH
LH
OUT DOOR
4
During
off-timer
operation
OUT DOOR
if you press the Timer
15
Button, the
rest time will be
displayed.
SafetyPrcuions
11
Plasma Air Purifying
Air
1
Purifying Operation only
Press the Plasma Air
1
Operation Procedure
Purifying Operation Start/Stop
Button.
A/CL
A/CL
OperatingIsuco
CarendMitc
Troubleshtingp
(Operation
will start when the button is
Select Fan
2
The
display
pressed,
and
stop when the button is pressed again.)
speed.
shows low fan
speed
at the initial condition.
MODE
?
You
dry
2
can
or
Air
LH
M
LH
M
LH
M
Low
Medium
High
operate the Plasma Air Purifying under the unit operation of cooling, heating, soft
Auto mode.
Purifying Operation
1. Press the
Start/Stop
2. Select the desired
Cooling
or
any other
Operateion.
Button.
Operation
3. Press the Plasma Air
4. Set the fan
with
Mode.
Purifying Operation
speed.
16
ON/OFF Button.
12
Child Lock
Operation
Procedure
Press the low and
1MODE
The unit will
high temperature setting
respond with beep.
ROOM TEMP.
buttons
SET TEMP.
simultaneously
ROOM TEMP.
M
SET TEMP.
LH
OUT DOOR
After 3 seconds,
it will be shifted.
During
Child Lock
SET TEMP.
M
LH
OUT DOOR
2
ROOM TEMP.
M
LH
ENGLISH
for 3 seconds.
OUT DOOR
After 3 seconds,
it will be shifted.
Operation
Whenever you press any Button on Display Panel, it will
", which means Display panel is Locked.
immediately display
"
All the Button
on
But the Button
3
For
releasing
the indoor unit
on
Display panel
will not work.
the remote controller will work.
child lock
Operation
Press the low and
The unit will
high temperature setting buttons simultaneously for 3
respond with beep, Child Lock Operation will removed.
MODE
ROOM TEMP.
SET TEMP.
ROOM TEMP.
M
seconds
SET TEMP.
ROOM TEMP.
M
LH
SET TEMP.
M
LH
OUT DOOR
again.
LH
OUT DOOR
After pressing
the buttons it will be shifted
After 3 seconds,
it will be shifted.
OUT DOOR
immediately
Auto restart
In
case
the power
function to
comes on
again
after
a
power failure, Auto Restarting Operation is the
to the previous operating conditions.
operate procedures automatically
17
Care and Maintenance
CAUTION: Before performing any
During
SafetyPrcuions
Remove the Air Filter.
Take hold of the tab and
remove the filter.
Clean.
To remove the dust
?
?
?
Don't wash with water.
Wipe
soft
?
dry
Dip the air cleaner into the water mixed with
detergent, for 20~30minutes, and dry in the shade.
Re-insert the air cleaner to the original position.
original position.
Never
of the air conditioner
?
a
pull slightly forward to
Clean.
?
with
Remove the Air Cleaner.
Take hold of the tab and
remove the air cleaner.
to
adhering to the filters,
shade.
Re-insert the filter to the
?
any of the
Water hotter than 40°C.
Could
cloth.
use
cause
followings.
Volatile substances.
?
deformation
Could
and/or discoloration.
damage the surfaces
of the air conditioner.
When the air conditioner is not going to be used for a
At the end of the
At the start of the
season
Operate the air conditioner at the following
settings for 2 to 3 hours.
Type of operation : Cooling.
Temperature setting : 30°C.
This will dry out the internal mechanisms.
Clean the air
long time.
season
filters, re-insert, then operate
the air conditioner.
?
?
Remove the batteries from the Remote Control.
Be
sure
that
nothing
obstructs the air outlet
and intake vents.
Turn off the circuit breaker.
CAUTION
CAUTION
Turn off the circuit breaker when the air conditioner
is not going to be used for a long time.
Dirt may collect and may cause a fire.
Operation Tips
Do not overcool the
Troubleshtingp
pull slightly forward
Cleaning of the air cleaner.
Recommended about once every three months
either use a
cleaner, or wash them in water and dry in the
Cleaning
system.
season
Cleaning of the air filters.
Recommended about once every two weeks
vacuum
OperatingIsuco
CarendMitc
the
turn off the main power to the
maintenance,
room.
This is not
wastes
good for your
electricity.
health and
Keep
blinds
or
curtains closed.
Do not let direct sunshine enter the
room
when the air conditioner is in
Make
sure
Avoid
much
the
that the doors and
are
shut
room.
Clean the air filter
tight.
opening doors and windows as
as possible to keep the cool air in
Blockages
regularly.
in the air filter reduce the
airflow and lower
dehumidifying
once
room
temperature uniform.
Adjust the vertical
direction to
and horizontal airflow
ensure a
temperature in the
operation.
windows
Keep the
cooling
and
effects. Clean at least
every two weeks.
18
Ventilate the
room
Since windows
are
uniform
room.
occasionally.
kept closed,
it is
a
idea to open them and ventilate
the room now and then.
good
Before you call for service...
Troubleshooting Tips! Save
?
Check the
following points
contact your dealer
or
before
requesting repairs
or
money!
service.... If the fault
See page
Explanation
operate.
persists, please
service center.
Case
Does not
time and
?
Have you made
?
Has the fuse blown
a
mistake in timer
operation?
has the circuit breaker been
or
tripped?
?
?
?
Is the power Switch at Off?
Is the unit at the starting of
If yes, wait for
The
room
has
a
?
peculiar
It
finishing
Check that this is not
a
walls, carpet, furniture,
odor.
seems
leaking
that condensation is
?
Condensation
occurs
conditioner cools the
from the air
-
Heating Operation?
If yes, Hot-start is activating.
Is the unit in the Deicing?
the
Deicing.
damp
or
smell exuded
cloth items in the
by the
-
room.
when the airflow from the air
warm room
air.
-
conditioner.
Air conditioner does not
operate
for about 3 minutes
?
This is the Protection device of the air conditioner
?
Wait about three minutes and
operation will begin.
If the airflow
temperature become
?
when restarted.
warm, it will
order to
it is
Does not cool
or
heat
?
begins
before its
cause an
undesired
cooling
prevent this, the airflow will
not
.
effect. In
begin
until
sufficiently warm.
Is the air filter
dirty?
See air filter
cleaning
18
instructions.
effectively.
?
The
may have been very hot when the room
air conditioner was first turned on. Allow time for it
room
-
to cool down.
?
Has the
?
Are the indoor unit's air inlet
temperature been
set
incorrectly?
outlet vents
or
-
obstructed?
The air conditioner
is
operation
?
For
a
noise that sounds like water
-This is the sound of freon
noisy.
flowing
flowing.
inside the air
conditioner unit.
?
For
a
noise that sounds like the
compressed
air
-
into
atmosphere.
dehumidifying water being
processed inside the air conditioning unit.
releasing
-This is the sound of the
Remote controller
faint,
or no
display
display
at all.
is
?
Are the batteries
?
Are the batteries inserted in the
depleted?
directions?
19
opposite (+)
and
(-)
7
ENGLISH
Memo
20
P/No.: 3828A20026Z
Printed in Korea
Download PDF

advertising