advertisement
▼
Scroll to page 2
of 27
DVD PLAYER OWNER'S MANUAL MODEL : DV8621P/ DV8721P Before connecting, operating please read this instruction booklet or adjusting this product, carefully and completely. Safety Precautions CAUTION NOTES ON COPYRIGHTS: RISK OF ELECTRIC SHOCK DO NOT OPEN It is forbidden CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER by law to copy, broadcast, show, broadcast play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. via cable, (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric This shock to persons. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINIThe exclamation point is intended to alert the within user an equilateral triangle to the presence of TION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE important operating and maintenance (servicing) instructions in the literature accompanying the product. DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE WARNING: TO REDUCE THE RISK OF FIRE OR ELEC- QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. TRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this such as a book case or equipment in a confined space similar unit. SERIAL NUMBER: The serial number is found Serial No. CAUTION: To Digital Video Disc Player employs manual of this a Laser System. read this owner's proper product, please carefully and retain for future reference should the ensure use require maintenance, contact (see service procedure). Use of controls, an unit authorized service location adjustments, or the performance of procespecified herein may result in haz- dures other than those ardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be 2 placed on the back of unique to this unit and not available others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. This on this unit. This number is the apparatus. ___________________________________ ___________________________________ to Table of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 BeforeUse..............................4-5 PlayableDiscs...........................4 Precautions.............................5 NotesonDiscs..........................5 AboutSymbols..........................5 .6 FrontPanelandDisplayWindow. . . . . . . . . . . . . RemoteControl............................7 Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3/WMA Disc NotesonMP3/WMARecordings. . Preparation . . . . .18-19 18 . . . . . . . . .18 Pause.............................19 MovingtoanotherTrack...............19 RepeatTrack/All/Off..................19 Search.............................19 Random...........................19 RepeatA-B.........................19 3DSurround........................19 .19 ChangingtheAudioChannel. OperationwithJPEGDisc...................20 ViewingaJPEGdisc.....................20 MovingtoanotherFile.................20 . RearPanel................................8 . . . . . . . . . . . . Connections............................9-10 StillPicture.........................20 ConnectingtoaTV.......................9 .10 ConnectingtoOptionalEquipment. BeforeOperation.......................11-14 GeneralExplanation......................11 On-ScreenDisplay.......................11 InitialSettings........................12-14 12 Initial Settings General Operation. Language..........................12 Toflipthepicture.....................20 Torotatepicture......................20 .20 NotesonJPEGRecordings. ProgrammedPlayback.....................21 Programmed Playback with Audio CD and . . . . . . . . . . . . . . . . . Picture.............................12 Sound.............................13 Others.............................13 ParentalControl......................14 . . . . . . . . . . . MP3/WMADisc.........................21 ProgrammedPlaybackwithVideoCD. RepeatProgrammedTracks ErasingaTrackfromProgramList. ErasingtheCompleteProgramList. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 .21 .21 .21 AdditionalInformation.....................22 LastConditionMemory...................22 ScreenSaver...........................22 Operation .15-17 OperationwithDVDandVideoCD. PlayingaDVDandVideoCD...............15 . . . . . . . GeneralFeatures........................15 MovingtoanotherTITLE...............15 15 Moving to another CHAPTER/TRACK . . . . . Search.............................15 Still Picture and Frame-by-Frame Playback . 16 SlowMotion.........................16 VideoModeSetting......................22 22 Controlling other TVs with the remote control SystemSelect..........................22 . . . Reference Troubleshooting..........................23 LanguageCodeList.......................24 CountryCodeList.........................25 Specifications............................26 Random...........................16 Repeat............................16 RepeatA-B.........................16 About the symbols for instructions TimeSearch........................16 3DSurround........................16 Indicates hazards Zoom..............................17 itself MarkerSearch.......................17 SpecialDVDFeatures....................17 TitleMenu..........................17 DiscMenu..........................17 or likely to cause damage. harm to the unit other material Indicates special operating Indicates tips and hints for features of this unit. making the task easier. CameraAngle.......................17 .17 ChangingtheAudioLanguage. .17 ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . Subtitles...........................17 3 INTRODUC Before Use Playable Disc-related terms Discs Title The main film content (8cm/12cmdisc) or can Audio CD Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. play a DVD±R, DVD±RW, Kodak Track -- -- the conditions of the recording equipment or the CD-R/RW (or DVD±R/±RW) disc itself, some CD-R/RW (or DVD±R/±RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. Notes (Video Sections of on on enabling On only) piece assigned musical on a a video CD track number, you to locate the track you want. video CD with PBC (Playback control) functions, pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a moving pictures and still you to locate the scene you want. A scene is composed of one or several tracks. other functions may be added. Refer also to the instructions supplied with the DVDs with the or and Video CDs. Some DVDs made for business purposes may not be played on the unit. code of the DVD player and DVDs player is designed and manufactured 2 playback of region "2" encoded DVD software. The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit can play only DVD discs labeled "2" or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVD discs may not have a region code label even though their playback is prohibited by area limits. 4 or a Scene Types for CD and audio CD picture audio CD. Each track is or an playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available This DVD a easily. DVDs and Video CDs Some Regional enabling you to locate it Notes Depending feature content (VCD) (8cm/12cmdisc) PICTURE CD, SVCD, and CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files. -- accompanying or additional feature content, or music album. Each title is assigned a title reference number Video CD (8cm/12cmdisc) In addition, this unit (DVD only) DVD There of video CDs are two types of video CDs: equipped with PBC (Version 2.0) (Playback control) functions allow you to interact Video CDs PBC system via menus, search functions, typical computer-like operations. Moreover, of high resolution can be played if they are or still other pictures included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. in the same Before Use (Continued) Storing Precautions After the unit Handling When shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. The When setting up the unit The picture and sound of a nearby TV, VCR, or radio during playback. In this case, position may be distorted the unit away from the TV, VCR, unit after removing the disc. To keep Do not near or radio, or turn off the volatile liquids, contact with the unit for a leave marks such as on long period Cleaning discs Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the centure ter out. plastic products in of time. They will the surface. soft, dry cloth. If the surfaces soft cloth lightly solution. Do not benzine, light, as there may be a considerable temperature increase inside the car. insecticide spray, or To clean the cabinet a store the disc in its case. the unit Cleaning Use playing, Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- the exterior surfaces clean use the unit. Do not leave rubber use a discs or are moistened with a extremely dirty, detergent mild strong solvents such as alcohol, thinner, as these might damage the surface Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older records. vinyl use About Symbols of the unit. About the To obtain clear picture The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. a " may appear on the TV This icon means the function manual is not available About the disc on Discs DVD VCD2.0 Handling Hold the disc on playback side of the disc. by the edges so that fingerprints the surface. Do not stick paper during operation. explained in this owner's that specific DVD video disc. symbols screen for instructions of the following symbol is represented by the symbol. one to the disc DVD Video CDs with the PBC (playback control) function. discs VCD1.1 Do not touch the get on A section whose title has applicable only Notes symbol display " or tape on the disc. Video CDs without the PBC (playback control) function. will not CD Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. 5 INTRODUC Front Panel and Display Window 1. DV8621P POWER Switches the 12 3 4 5 6 7 891 0 2. player ON and OFF. PLAY(N) playback. Starts 3 4 PAUSE(X) Pause playback temporarily/press repeatedly for frame-by-frame playback. 4. STOP(x) Stops playback. 5. DV8721P 12 3. 5 6 7 Scan/Skip ( m / . ) previous chapter / track or to the beginning. Press and hold for two seconds Reverse Go to 891 0 for fast 6. search. reverse Forward Skip/Scan ( > / M ) chapter / track. Go to the next Press and hold for two seconds for fast forward search. 7. Disc Tray Insert 8. 9. a disc here. OPEN/CLOSE(Z) Opens or closes the disc tray. Display window Shows the current status of the player. 10. Remote Sensor Point the DVD Display Player remote control here. Window Indicates current function DVD player (Play, Pause) DVD inserted Indicates repeat mode CD Audio CD inserted VCD Video CD inserted SVCD Super MP3 MP3 or Indicates Video CD inserted DTS and of the current disc. WMA disc inserted CHP/TRK current Indicates chapter or encoding Dolby digital Indicates total time/elapsed playing time track number S VCD DVD CHP MP3 CD TRK 6 AD B ALL Remote Control OPEN / CLOSE Opens TV Control Buttons and closes the disc tray. TV POWER: POWER Turns the TV Switches DVD Player ON and OFF. 0-9 number buttons Selects numbered items in a menu. CLEAR Removes track number on the program list or a mark MARKER SEARCH on the a menu. SCAN(m/M) Search backward or forward. PAUSE/STEP(X) playback temporarily/ press repeatedly for frame-by-frame playback. Pauses PLAY(N) playback. Starts on or off. TV PR/CH +/--: Selects TV's channel. INTRODUC TV VOL +/--: Adjusts TV's volume. AV: Selects the TV's source. SKIP(./>) Go to next chapter or track. Returns to beginning of current chapter or track or go to previous chapter or track. STOP(x) Stops playback. TITLE title menu, if available. Displays DVD MENU Accesses menu on a DVD disc. bBvV(left/right/up/down) Selects - an item in the ? RETURN Removes the setup menu, disthe video CD with PBC. plays menu. ? ENTER Confirms menu ? selection. DISPLAY ? Accesses On-Screen display. AUDIO Selects an audio language (DVD) or (CD). audio channel an SUBTITLE Selects a subtitle a DVD ? language. ANGLE Selects ? camera angle ? SETUP or removes setup MARKER SEARCH menu. ? PROGRAM Places a track on the program list. ? ZOOM Enlarges ? video image. REPEAT Repeat chapter, track, title, all. ? ? Accesses point during play- SEARCH Displays if available MARKER Marks any back. menu. A-B Repeat ? RANDOM Plays ? sequence. * tracks in random order. This button is not available. 7 Rear Panel COAXIAL Connect to (Digital audio out jack) digital (coaxial) audio equipment. AUDIO OUT Connect to stereo (Left / Right) amplifier, receiver, an or system. VIDEO OUT Connect to a TV with video inputs. COMPONENT VIDEO OUT/PROGRESSIVE SCAN Connect to a TV with Y Pb Pr (Y Pb Pr) inputs. S-VIDEO OUT Connect to a TV with S-Video inputs. OPTICAL DIGITAL OUT Connect to (Digital audio out jack) digital (optical) audio equipment. AC Power Cord Plug Do not touch the inner rear permanent damage Remote Control Operation Point the remote control at the remote sensor and press the buttons. Remote Ccontrol Battery Detach the installation battery cover on the rear of the remote control, and insert two AAA AAA batteries (size AAA) aligned correctly. Do not mix old and mix different with new and batteries and types of batteries such standard, alkaline, etc. 8 pins of the jacks on the discharge may cause Electrostatic panel. never as into the power to the unit. source. Connections Tips Depending Progressive Scan (ColorStream Pro) If your television is your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections on video resolution Please refer to the manuals of your TV, VCR, Stereo or other devices as necessary to make the best connections. reproduction, connect jacks to the audio in jacks the player's of your audio/video equipment. amplifier, receiver, stereo or See "Connecting to Optional Equipment" on -- Make the DVD directly to the input channel. Do not connect the DVD Player's AUDIO OUT jack to the phono in jack (record deck) of your audio system. Do not connect your DVD Player via your VCR. The DVD image could be distorted by the copy protection sure Player 1 is connected -- 2 Make the one of the capabilities -- following connections, depending existing equipment. -- of your in jacks on the DVD Player jacks on the TV using the to Connect the Left and Right AUDIO OUT jacks of Player to the audio left/right in jacks on the (A) using the audio cables. the DVD Notes -- to a TV on corresponding Pb Pr cable (C). TV system. Connecting possible. PROGRESSIVE SCAN Y TV. Tune the TV to the correct video -- "digital ready" Connect the COMPONENT VIDEO OUT/ the page 10. Caution or If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player. System For better sound high-definition television, you may take advantage of the DVD Player's progressive scan output for the highest described below. AUDIO OUT a connection Set the Progressive to "On" on the setup progressive signal, see page 12. Set the Progressive to "Off" by removing menu STOP and hold it for five seconds before relesasing it. analog video for any disc from the unit and close the disc tray. See that "no disc" is displayed on the display window. Then press does not work with the Progressive scan connections (yellow VIDEO OUT jack) or S-VIDEO connection. Video connection 1 2 Connect the VIDEO OUT the video in jack jack on the DVD Player to using the video cable (V). the TV on Connect the Left and Right AUDIO OUT jacks of Player to the audio left/right in jacks on the (A) using the audio cables. the DVD TV S-Video connection 1 Connect the S-VIDEO OUT to the S-Video in cable 2 on the DVD using Player the S-Video (S). Connect the Left and Right AUDIO OUT jacks of Player to the audio left/right in jacks on the (A) using the audio cables. Component Video (Color Stream ) connection Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN the Pr 2 jack the TV the DVD TV 1 jack on corresponding cable (C). in jacks on the DVD Player to jacks on the TV using an Y Pb Connect the Left and Right AUDIO OUT jacks of Player to the audio left/right in jacks on the (A) using the audio cables. the DVD TV Note If the TV has an S-video input, connect the DVD player using an S-video cable, video cable. yellow with the S-video cable. When do not connect the 9 PREATION Connections Connecting (Continued) Optional Equipment to Notes -- Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and DVD Player to the amplifier, receiver, cables (A). Right AUDIO OUT jacks on the right in jacks on your stereo system, using the audio audio left and or Connecting to an amplifier equipped with two digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2, or DTS) Connect one of the DVD Player's DIGITAL AUDIO jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable. OUT You will need to activate the 2 (See "Digital Digital Audio Output" player's digital output. page 13). on Multi-channel sound A digital multi-channel sound quality. For this connection provides the best you need a multi-channel Audio/Video receiver that supports one or more of the supported by your DVD Player (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver. audio formats Caution: Due to the DTS will be in DTS Licensing agreement, the digital output digital out when DTS audio stream is selected. Rear of DVD O player X OPTICAL A COAXIAL DIGITAL INPUT Amplifier (Receiver) 10 digital output does not match capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. the -- --To see screen channel 1 If the audio format of the R L AUDIO INPUT the audio format of the current DVD in the display, press AUDIO. on- Before General Operation Temporary Explanation This manual gives basic instructions for operating the Player. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indithat the cating operation is not permitted by the DVD Player or is not available on the disc. DVD On-Screen General screen. playback 1 2 3 CHAPT TRACK ALL AB OFF Display Repeat Title Repeat Chapter Repeat Track Repeat All Tracks Repeat A-B Resume displayed on the TV changed on the menu. can be display operation Press DISPLAY (non-PBC Video CDs (non-PBC only) Video CDs only) Repeat Off status can be Some items On-screen TITLE Feedback Field Icons Action play from this prohibited or point not available Notes Some discs may not provide all of the features on the display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. during playback. on-screen Press 3/4 to select an The selected item will be Press 1/2 to change The number buttons numbers (e.g., title item. highlighted. the can setting of an item. be also be used for number). press ENTER to execute the For some setting functions, setting. DVD Items Function (Press 3/4 to select desired item) Title Number 1/3 Chapter Number 1 /12 Time search 0:20:09 Audio language and Digital Audio Output D mode Subtitle language Angle Sound VCD2.0 1 ENG 5.1 CH ABC Shows the current title number and total number of to the desired title number. Numbers ENTER Shows the current chapter number and total number of chapters, and skips to the desired chapter number. Numbers ENTER Shows the elapsed playing time, and searches the point by the elapsed time directly. Shows the current audio soundtrack language, encoding method, and channel number, and changes the setting. Shows the current subtitles language, and changes the setting. 1/1 Shows the current angle number and total number of angles, and changes the angle number. Shows the current sound mode, and changes the setting. 1/2,or 1/2,or Numbers ENTER 1/2,or AUDIO 1/2,or SUBTILE 1/2,or ANGLE 1/2 VCD1.1 Items Function (Press 3/4 to select desired item) Track Number 1/4 Time Shows the current track number, total number of tracks and PBC On mode, and skip to the desired track number. 0:20:09 Shows the elapsed playing time (Display only) STER. Shows the audio channel, and changes the audio channel. Audio Channel Sound titles, and skips OFF NORM. Selection Method NORM. Shows the current sound mode, and changes the setting. Selection Method 1 /2,or Numbers ENTER -- 1 /2,or AUDIO 1/2 11 PREATION Before Initial You Operation (Continued) Picture Settings set your own Personal Preferences on the can player. TV Aspect nected. Initial General Settings Operation The setup Displays menu above and below the appears. Scan is English 16:9 Wide: Select when Disc Menu French Rating German Disc Audio 4:3 Letterbox Spanish Disc Subtitle 4:3 Panscan Italian Disc Menu 16:9 Wide Code Aspect Country Hungarian Output Digital Press 3/4 to select the desired item. will show the current well as setting for the setting(s). While the desired item is selected, press 2, then Press ENTER to confirm selection. additional Press or PLAY to exit the menu. Language Language Progressive Scan DVD Disc Audio Off Disc Subtitle On Disc Menu original language set for the disc is selected. Other : To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 24. If you enter the wrong language : The Rating Country Aspect Menu Language Progressive Digital Original Disc Subtitle English Disc Menu French Rating German Country TV Code Language Progressive Scan Audio Digital Output Caution Dutch Polish Once the setting for progressive scan output is entered, image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan Hungarian an you to On in error, you must reset the unit. Language a see 1) for the setup menu. This is the when you press SETUP. language Remove any disc from the unit and close the disc on the display tray. See that "no disc" is displayed menu window. 2) Press STOP and hold it for five seconds before Disc Audio English Spanish releasing it. The video Disc Subtitle Disc Menu French standard setting Rating German visible Country TV Code Language Progressive Italian Dutch Aspect Menu 12 Output Spanish Others Select Scan Others Other-------- Menu Audio Italian Aspect Menu Code TV code, press CLEAR. Disc Audio DVD Progressive provides the highest quality pictures with less flickering. If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks, but are connecting the DVD Player to a standard (analog) television, set Progressive Scan to Off. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. Subtitle. Original Output Others for the disc's Menu, Audio, and language Scan Scan Video 3/4 to select the desired items Audio alternate 3 setting. your 4 Some require steps. SETUP, RETURN, 5 setup a Code Progressive as 16:9 wide TV is connected. Aspect Menu Language Other-------- screen a TV Others selected item, sides of the Rating Polish Scan style (Both cut Dutch Language Audio played off). back in that Disc Subtitle Digital con- bars conventional TV set is style picture are Progressive Disc masking Original Menu Select a with Disc Audio TV The standard 4:3 TV is images picture. connected. The video material formatted in the Pan & Country 2 a theatrical 4:3 Panscan: Select when Press SETUP. 1 DVD 4:3 Letterbox: Select when Scan on a output will be restored to the picture will once again be conventional analog TV or monitor. and a Before Operation (Continued) Sound Others Audio Digital Output Each DVD disc has Set the of audio output variety options. player's Digital Audio Output according to the a type of audio system you use. DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" The DRC, Vocal, PBC and Auto be changed. Play settings Press 3/4 to select the desired item and press ENTER. The setting of the selected item is changed between On and Off. if you connected the DVD Player's DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equip- Disc Audio DRC On Disc Subtitle Vocal On ment with a Disc Menu PBC Rating Auto Dolby Digital decoder). Stream/PCM: Select "Stream/PCM" if you connected the DVD Player's DIGITAL OUT jack to an amplifier or other DTS decoder, MPEG decoder. equipment decoder or with a PCM: Select when connected to a Country TV Dolby Digital recorded on the Dolby Digital, MPEG1, recording system. Disc Audio DOLBY DIGITAL Disc Subtitle Stream/PCM Disc Menu PCM digital or MPEG2 /PCM Rating Country Code TV Aspect Menu Language Progressive Digital Scan Audio Language Digital amplifier. player outputs sounds in the PCM 2ch format when you play a DVD video disc Sample Freq. 48 KHz 96KHz Output Off Code Progressive 2-channel On Play Aspect Menu The DVD stereo can Scan Audio Output Others Dynamic Range Control (DRC) With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation thanks to possible, digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may losing clarity at a lower volume without listen to a movie of sound. Set DRC to On for this effect. Others Vocal Sample Frequency To Sample Frequency setting, first select the desired Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing. change the Set Vocal to On only DVD is The karaoke channels playing. when a multi-channel karaoke on the disc will mix into normal stereo sound. PBC Set Playback Control (PBC) On: Video CDs with PBC are Off: Video CDs with PBC are to On or Off. played according to the PBC. played the same way as Audio CDs. Auto You Play can ically set up the DVD starts If Auto Play search a play DVD playing Player so a DVD disc automat- whenever the DVD is inserted. mode is set to On, this DVD player will playback time is long most and then title that back the title automatically. On: Auto Off: Play function is activated. Auto Play function is not activated. Note The Auto Play function may not work for some DVDs. 13 PREATION Before Operation (Continued) Parental Control Rating DVD Enter the code of DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain Code Country the disc. These scenes on scenes are 8 Disc Subtitle 7 Disc Menu 6 are Rating Country TV Country TV Code Menu Progressive Digital Digital 1 1 Country the setup Output Change Others Code using Country 2 step 3 Select 4 Shift 5 6 selection, 1 "Rating" on the Setup menu using the 3/4 buttons. 3 of the "Rating" While 3 When you have not entered a password yet. Enter a 4-digit password using the numbered but- "Rating" is selected, press 2. tons to create a personal 4-digit security password. then press ENTER. Enter the 4-digit password again and press ENTER to verify. When you have already entered a password; Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER. Select a rating from 1 (1) has the tons. One unless an the code is Changing the 4-digit code Enter the new 4-digit code, then press exactly the same code a second fy by pressing ENTER. ENTER. 5 Enter time and veri- 6 Press SETUP to exit the scenes scene scenes will not be is available same Press ENTER to confirm your 14 is necessary when the 4-digit code" 4 using the 3/4 butplayback restrictions. playback restrictions. not on rating played If you If you 1-2 as shown above to the left forget your 4-digit forget your (Rating). menu. password, code to clear the current pass- the disc. 1 Press SETUP to or a 2 Use the Number buttons to enter the display the setup menu. 6-digit number "210499". The 4-digit password is cleared. display for a moment. 3 rating selection, to exit the menu. Steps word, follow the procedure below. no 5 then press SETUP 4-digit password changed (see "Changing below.). suitable alternative is found, playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc. one. If Note Confirmation of the to 8 The alternative must have the lower Press ENTER to confirm your country code then press SETUP to exit the menu. least rated alternative button and select the 3/4 buttons. 3 1 to 8: Some discs contain played. Higher the 3/4 buttons. Enter the old code, then press ENTER. Select Change using 3/4 buttons then press ENTER. suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will be using Follow Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. Ratings left. 1 has the most Eight (8) using 2 using on 2 If you make a mistake before pressing ENTER, press CLEAR and enter 4-digit security password again. 4 cursor second character 2 on Code is selected, press 2. the first character Select the 3/4 buttons menu. Follow Unlock Output Select While 2 Scan Audio Scan Audio Others 3 Language Language Progressive 4 Aspect Code Aspect Menu 5 Rating US Disc Menu you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio were Code Set Disc Subtitle The Parental Control feature allows country-dependent. whose standards country/area Disc Audio rated from 1 to 8, and alternatively, more suitable scenes available for selection on some discs. Ratings are a used to rate the DVD video disc, referring to the list (See "Country Code List", page 25.). Enter a new code as "P CLr" appears shown above to the left on the (Rating). Operation Playing with DVD and Video CD Playback Setup Turn on General Features DVD and Video CD a DVD VCD2.0 the TV and select the video nected to the DVD Note VCD1.1 input source con- player. available Audio system: Turn on the audio system and select the input source connected to the DVD player. 1 Unless stated otherwise, all operations described the remote control. Some features may also be Moving Press OPEN/CLOSE to open the disc tray. When Load your 2 playback chosen disc in the tray, with the Press OPEN/CLOSE to close the tray. appears on the TV screen, and If playback press PLAY. In some cases, the disc disc has playback does not start, Moving The might When is loading a DVD Use the 1 234 buttons to select the title/chapter you want to view, then press ENTER to start playback. Press TITLE or title, you can move to num- to another CHAPTER/TRACK a title 1 /12 DVD MENU to return to the on a more chapter/track displayed may be displayed first after Video CD which offer a menu. or one 1/3 appear menu screen DVD than more 1/3 DVD follows: as VCD1.1 DVD menu disc has a menu screen menu. Press DISPLAY, then press the appropriate (0-9) to select a title number. instead. If Setup bered button 3 READING automatically. a the to another TITLE another title side down. starts on use menu disc has than as one more than track, you one chapter can move or a to another follows: Press SKIP . or > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, press DISPLAY. Then, press 3/4 to select the chapter/track icon. Then, enter the chapter/track number using the numbered buttons (0-9). screen. VCD2.0 Use the number buttons to select the track you want to view. Press RETURN to return to the Menu setting and the exact menu screen. operating procedures for two-digit numbers, press (0-9)in rapid succession. may differ depending on the disc. Follow the instructions on the each menu screen. Search You also may set PBC to Off under setup. See page 13. 1 Press SCAN m using the Note For menu The player DVD will now VCD2.0 or M the numbered buttons VCD1.1 during playback. go into SEARCH mode. 2 Press SCAN m Notes -- If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized -- "Parental Control", DVDs may have a Your player will not different from your player is 2 (two). (see page 14). region code. on play discs that have a region code player. The region code for this or M repeatedly to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, (backward) or MX2, MX4, MX8, (forward). 3 To exit SEARCH mode, press PLAY. 15 OPERATION with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD Video CDs (continued) 1 To Frame-by-Frame playback VCD1.1 The 2 To can advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote control. VCD2.0 DVD VCD1.1 2 Press SCAN Repeat (m or M) during PAUSE player will enter SLOW mode. (m or a the TV on screen. Video CD with PBC, you must set PBC to Off on the menu to use the Repeat function. See page 13. Repeat mode. speed changes: a 4. To exit Slow Motion A-B A* T 1/8, DVD AB To repeat VCD2.0 VCD1.1 OFF sequence in a a title: 1 Press A-B at your chosen " * A briefly appears 2 Press A-B on starting point. the TV screen. at your chosen end again point. "A B" appears briefly on the TV screen, and the repeat sequence begins ("AsB" appears the display window). mode, press PLAY (N). 3 To cancel the sequence, press A-B. Note Slow motion Video CDs. in playback Random reverse during playback The "RANDOM" appears 2 To return to normal possible > on Time Search in or stop mode. 1 Press DISPLAY screen. press RANDOM the TV screen. again. play during Random playback, the (track) and resumes Random OnaVideoCDwithPBC,youmustsetPBCtoOffon to use the Random function. See TRACK VCD1.1 ALL DVD Video Discs Repeat Chapter/Title/Off Repeat Chapter icon appears Repeat on the TV currently playing, Repeat Title icon appears on on the number buttons to enter hours, minutes, and starts from the selected time on the disc. If you enter playback will continue from the current point. DVD VCD2.0 VCD1.1 the TV the TV 3D SUR can produce five more speakers, instead of the speakers normally required to listen to multi- channel audio from screen. third time. screen. 3D Surround effect, which playback from two conventional stereo 1 Press DISPLAY a a simulates multi-channel audio a 2 Use 3 or 4 The sound a home theater system. during playback. to select the sound option will be option. highlighted. 3Use1or2totoselect"3DSUR". To turn off the 3D Surround effect, select "NORM". 16 sec- in the box. invalid time, This unit screen. press REPEAT mode, press REPEAT Repeat Off icon appears use right 3D Surround REPEAT. repeat the title second time. elapsed playing time of the OFF repeat the currently playing chapter, press 2 To dis- 4 Within 10 seconds, press ENTER to confirm the start time. NORM. - on-screen If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. Playback TITLE CHAPT The at screen. start time. Enter required onds from left to an VCD2.0 the 3 Within 10 seconds, Note This function only works with DVD Karaoke discs and video CD without PBC. DVD during playback. on The Time Search box shows the the Repeat appears playing 2 Within 10 seconds, press 3/4 to select the Time Search icon in the on-screen display. The "-:--:--" appears in the Time Search box. playback. menu -:--:-- current disc. unit selects another title the setup page 13. 0:20:09 DVD The Time Search function allows you to start any chosen time on the disc. VCD1.1 the TV on with playback, The "NORMAL" appears Tips By pressing SKIP is not VCD2.0 Karaoke DVD 1 Press RANDOM The All icon appears to select the M) Video CD, the Slow T 1/4 or T 1/2 (forward). The a Repeat mode, press REPEAT a third time. Repeat Off icon appears on the TV screen. The " 3 To exit screen. repeat the disc currently playing, press REPEAT setup required speed: t 1/16, t 1/8, t 1/4, or t 1/2 (backward), or T 1/16, T 1/8, T 1/4, or T 1/2 (forward). The the TV 3 To exit On 1 Press PAUSE/STEP (X) during playback. The recorder will now go into PAUSE mode. 1 To on Note Slow Motion With press REPEAT. currently playing, Repeat Track icon appears The 2 You 3 Use the SCAN repeat the track second time. 1 Press PAUSE/STEP during playback. The player will now go into PAUSE mode. The DVD Track/All/Off Repeat - or with DVD and Video CD Operation General Features Zoom VCD2.0 DVD (continued) during playback or still playback If you press ZOOM repeatedly, the increases up to six steps. 2 Use the 1 234 buttons to discs: Menus to DVDs may offer menus that allow you to access special features. To use the disc menu, press DVD MENU. magnification level move the zoomed through picture. the resume normal playback or the contents of DVD Video Checking activate the Zoom function. 3 Press CLEAR to return to paused image. Then, press the appropriate number button to select option. Or, use the 1 234 buttons to highlight your selection, then press ENTER. Title Menu 1 Press TITLE. screen. Note function may not work for zoom 2 The DVDs. some VCD2.0 DVD menu, the menu will appear on the menu can remove list menu may appear. angles, spoken language chapters for the title. camera options, and the title menu, press TITLE again. VCD1.1 Disc Menu MARKER SEARCH 1/9 a Otherwise, the disc and subtitle 3 To Marker Search an DVD If the current title has The DVD VCD1.1 The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM DVD Features Special DVD 1 Press DVD MENU. You can start playback from a memorized point. Up The disc to menu nine points can be memorized. To enter a mark, follow these steps. 2 To 1 Camera During disc playback, press MARKER when playback reaches the spot that you want to 2 Repeat step on the TV briefly. screen 1 to enter up to nine Marker points on a disc. To Recall a displayed. the disc menu, press DVD MENU Angle If the disc contains memorize. The Marker icon will appear remove is DVD scenes again. 1/1 recorded at different camera angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select desired angle. The number of the current Marked Scene angle appears on the a display. 1 ENG 1 disc During playback, The MARKER SEARCH press SEARCH. menu will appear on 2 Within 10 seconds, press 1/2 to select number that you want to recall. a the screen. Marker 3 Press ENTER. will start from the Marked Playback 4 To remove scene. the MARKER SEARCH menu, press SEARCH. To clear 1 a During playback, The MARKER SEARCH 2 the Audio Press AUDIO repeatedly during playback language or audio track. to hear a Changing the Audio Channel VCD2.0 Press AUDIO repeatedly during playback to hear (STER., LEFT or RIGHT). different audio Language 5.1 CH VCD1.1 a dif- ferent audio channel Marked Scene disc D DVD Changing Subtitles press SEARCH. menu will appear on the screen. Press 1/2 to select the Marker number that you want DVD ABC 1 ENG Press SUBTITLE repeatedly different subtitle languages. during playback to see the to erase. 3 Press CLEAR. The Marker number will be erased from the list. 4 Repeat steps 5 To remove the MARKER SEARCH menu, press SEARCH. Note If appears, the feature is not available on the disc. 2 and 3 to erase additional Marker numbers. 17 OPERATION with Audio CD and MP3/WMA Disc Operation Playing an Audio CD and MP3 CD The DVD MP3/WMA Disc Notes MP3/WMA Insert play Recordings files that have The player can not read an MP3 file that has a file extension other than ".mp3". a About An WMA file is JPEG Press 3/4 to select the MP3/WMA then press ENTER. The MP3/WMA menu appears on the TV screen. 1. 2. 4. Program Folder1 Folder2 Folder3 Folder4 Folder5 Folder6 Folder7 Clear All Folder8 5. OFF 00:00 Microsoft audio Media 3 4 Press 3/4 to select ENTER. compatibility track then press PLAY or move is - - CD Creator", which creates an ISO9660 file system. single session disc requires MP3/WMA files in the A 6. File no MP3/WMA file in the 1st or use a new one. names and must should be named incorporate ".mp3" e.g. "********.MP3" the current track's elapsed playing time will appear on the display window and menu. Playback will stop at the end of the disc. Press DVD MENU to player track, it cannot playback MP3/WMA files. If you wish to playback MP3/WMA files, format all the data in Playback starts. During playback, Press TITLE to with this follows: Sampling Frequency / only at 44.1kHz (MP3), 44.1kHz (WMA) Bit rate / within 32 320kbps (MP3), 32 128kbps (WMA) CD-R physical format should be "ISO 9660" If you record MP3/WMA files using the software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback MP3/WMA files. We recommend that you use "Easy- the disc a offers double the audio the MP3 format. first track. If there is Press 3/4 to select a folder, and ENTER. A list of files in the folder appears. Audio) compression - 3. MP3 WMA as 22.05 to the MP3/WMA-JPEG move a MP3/WMA Disc limited Press RETURN to choice menu. WMA(Window Media Audio) technology. WMA(Windows compression of MP3 WMA 2 compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". MPEG1 audio right. on disc and close the tray. Audio CD; Audio CD menu appears on the TV screen go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 1 Recordings An MP3 file is audio data MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on can MP3/WMA About MP3 WMA Player on or using or 8 letters or less ".wma" extension "********.WMA". 7. Donotusespecialletterssuchas"/:*?"<>"etc. 8. Total number of files on the disc should be less than 650. to the next page. move to the previous page. This DVD player requires discs/recordings to meet certain technical standards in order to achieve Program CD Program MP3 WMA TRACK01 TRACK02 TRACK 1.mp3 TRACK03 TRACK 2.mp3 TRACK 5.mp3 TRACK06 TRACK 6.mp3 TRACK07 TRACK 7.mp3 Clear All TRACK08 STER. NORM. Audio CD menu 0: 56: 18 Clear All TRACK 8.mp3 00:00 1 If you are use MP3/WMA in return to the To 5 18 a menu file list and want to return to the Folder the 3/4 to and highlight previous menu screen. stop playback at any other optimal automatically types (including CD-R containing MP3 or WMA files). That require certain pre-existing conditions (see above) to insure compatible playback. OFF Tip list, are of recordable disc formats TRACK 4.mp3 TRACK05 Pre-recorded DVDs set to these standards. There are many different TRACK 3.mp3 TRACK04 playback quality. press ENTER to time, press STOP. Customers should also note that required permission is in order to download MP3/WMA files and music from the Internet. Our company has no grant such permission. Permission should to always be sought from the copyright owner. right Operation Pause with Audio and MP3/WMA Disc MP3 CD 1 Press PAUSE/STEP WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or MP3 CD WMA or > Press SKIP . twice vious track. step back briefly to to return to the to the pre- of audio CD, to go directly to any track, enter using the numbered buttons (0-9) the track number during playback. Repeat Track/All/Off " appears on the at your chosen end again menu screen. point. MP3 CD 3 To exit the sequence and return to normal A-B again. The 3D Surround This unit WMA more Repeat icon and "TRACK" appears the on Repeat icon and "OFF" appears can on the screen, play, CD produce a 3D Surround effect, which speakers normally required channel audio from 1 Press DISPLAY menu press menu screen. simulates multi-channel audio playback from two conventional stereo speakers, instead of the five repeat the track currently playing, press REPEAT. The 2 Press A-B * Repeat icon and "A B" appears on the menu and the sequence begins to play repeatedly. briefly during or 1 To Repeat icon and "A The playback to go to the next track beginning of the current track. case CD ing point. to another Track Press SKIP . In A-B To repeat a sequence. 1 During disc playback, press A-B at your chosen start- press The Moving (Continued) a or to listen to multi- home theater system. during playback. screen. 2 To repeat all tracks on a disc, press REPEAT 2 Use 1 a sec- ond time. The "ALL" appears Repeat icon and on the or The sound 2 to select the sound option will be option. highlighted. 3Use3or4totoselect"3DSUR". menu screen. To turn off the 3D Surround effect, select "NORM". 3 To cancel The Repeat mode, press REPEAT a third time. Repeat icon and "OFF" appears on the menu screen. Search 1 Press SCAN m The player MP3 CD will now or M Changing the Audio Channel CD Press AUDIO repeatedly during playback to hear a different audio channel (STER., LEFT, or RIGHT). WMA during playback. go into SEARCH mode. 2 Press SCAN m or M repeatedly to select the required speed: mX2, mX4, mX8 (backward) MX2, MX4, MX8 (forward). Search speed and direction are indicated on the or menu screen. 3 To exit SEARCH mode, press PLAY. Random MP3 CD 1 Press RANDOM WMA during playback or when playback is stopped. The unit automatically begins Random "RAND." appears on the menu screen. Playback and playback, press RANDOM repeatdisappears on the menu screen. 2 To return to normal edly until "RAND." 19 OPERATION Operation Viewing with JPEG Disc JPEG disc a Moving JPEG Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. This DVD Insert 1 a or > appears on during viewing a picture previous file. Still Picture 1 Press PAUSE/STEP menu once to advance to the next file or to the disc and close the tray. The MP3/WMA-JPEG choice TV to another File Press SKIP . the screen. slide show. during go into PAUSE mode. 2 To return to the slide show, press PLAY or press PAUSE/STEP again. The player will now MP3 WMA To JPEG 2 menu appears on the TV picture Press 3/4 during showing a picture picture horizontally or a vertically. Press 3/4 to select the JPEG then press ENTER. The JPEG the flip To rotate screen. Press 1/2 JPEG picture Folder1 Folder2 to flip the picture during showing clockwise or a picture to rotate the counter clockwise. Folder3 Folder4 Folder5 Notes Folder6 Folder7 on JPEG Recordings Folder8 Slide Speed Depending Off upon the size and number of the JPEG a long time for the DVD player to files, it could take Press 3/4 to select and ENTER. 3 A list of files in the folderfolder, appears. Press RETURN to choice menu. a move to the MP3/WMA-JPEG If you are in a file list and want to return to the Folder the 3/4 buttons the remote to on highlight and press ENTER to return to the " previous menu screen. If want to view you 4 highlight a particular file, press file and press ENTER the file proceeding starts. a or Viewing During viewing a file, press RETURN the previous menu (JPEG menu). Press TITLE to 3/4 to PLAY. to move to Picture1.jpg Picture2.jpg Picture3.jpg Picture4.jpg Picture5.jpg Picture6.jpg Picture7.jpg 1024X768 Slide Speed 5/32 Off 1024X768 Picture5.jpg Tip are three viewing Slide Speed options: Fast, Normal, Slow, and Off. Press 1/2 to highlight the Slide There Speed then press 3/4 to select the option you want to use, and press ENTER. To at other time, press STOP. viewing any 5 Thestop JPEG appears. menu 20 --- reduce the resolution of the JPEG files pixels and burn another disc. on the disc should be less than 650. Some disc may be incompatible due to different recording format or condition of disc. When you are using software such as "Easy CD Creator" to burn the jpeg files into the CD-R, ensure that all the selected files have the ".jpg" extensions when copying rename File move Folder1 5/32 big into the CD layout. If the files have to the next page. Press DVD MENU to move to the previous page. JPEG too Total number of files and folders use " are to less than 2 mega Tip list, read the disc's contents. If you don't see an ondisplay after several minutes, some of the files screen them ".jpg" extension will not be able to player. Even though the files are JPEG image files in windows explorer. names be read shown by as ".jpe" or ".jpeg" extensions, please as ".jpg" files. without this DVD Programmed Playback CD VCD2.0 with Audio CD Programmed Playback function enables you to store your favorite tracks from any disc in the player memory. Program Program with Video CD Note On a setup Video CD with PBC, you must set PBC to Off on the menu to use the Program function. See page 13. contain 30 tracks. can Press PROGRAM 1 WMA Programmed Playback and MP3/WMA Disc The MP3 VCD1.1 mode to enter the during playback or in Program Edit mode. the stop E The mark will appear to the right of the word on the right side of the menu screen. Program OPERATION Insert Video CD and close the tray. 1 2 Press PROGRAM while The VCD Program menu is playback stopped. will appear. Program VCD E TRACK 1 TRACK 2 Note TRACK 3 Press PROGRAM to exit the Program TRACK 4 Edit mode; TRACK 5 TRACK 6 E the mark will Select 2 disappear. TRACK 7 track, then press ENTER a selected track the on Clear All TRACK 8 Program to place the list. Note 2 to Repeat step Program list. 3 place E Program CD additional tracks the Program MP3 WMA TRACK 1 TRACK 12 TRACK 2 TRACK 8 TRACK 1.mp3 TRACK 3 TRACK 10 TRACK 2.mp3 TRACK 4 TRACK 3 TRACK 3.mp3 TRACK 7 TRACK 7.mp3 Clear All TRACK 8 0: 56: 18 STER. Audio CD 00:00 To repeat the track programmed track you selected last is highlighted on Press 3/4 to select the track you want to start 5 playing. left. from on the TV Tracks currently playing, Repeat icon and "TRACK" appears The screen. press REPEAT. on the menu screen. To repeat all tracks on the program list, press REPEAT a second time. Repeat icon and "ALL" appears on the menu screen. Repeat mode, press REPEAT a third time. The Repeat icon and "OFF" appears on the menu screen. The Press TITLE to to the next page. Press DVD MENU to move to the previous page. move Press PLAY to start. 6 Playback begins in the order in which you programmed the tracks and "PROG." appears on the menu screen. Playback stops after all of the tracks have played once. To resume normal playback, on normal Repeat Programmed menu the program list. 7 resume The "NORMAL" appears OFF Press 2. The steps 2-6 of "Programmed Playback with Audio CD and MP3/WMA disc" To Clear All 3 MP3/WMA menu menu. playback 4 programmed playback, press PROGRAM. TRACK 3.mp3 TRACK 8.mp3 NORM. Program TRACK 4.mp3 TRACK 5.mp3 TRACK 6.mp3 Follow PROGRAM to exit the or TRACK 2.mp3 TRACK 4.mp3 TRACK 6 Press RETURN 3 E TRACK 8.mp3 TRACK 5 4 on select a playback on the Program list programmed (or MP3/WMA) list and then press ENTER. "PROG." indicator disappears on the Erasing a menu screen. Track from Program List 1 Press PROGRAM MP3/WMA disc Program from track of CD To cancel E The during playback (Audio CD and only) or in the stop mode to enter the Edit mode. mark will appear. 2 Press 2 to move to the Program list. 3 Use 3/4 to select the track that you wish to from the Program list. erase 4 Press CLEAR. The track will be erased from the Erasing the 1 Follow steps List" as Program list. Complete Program 1-2 of "Erasing a List Track from Program above. 2 Use 3/4 to select "Clear All", then press ENTER. The complete Program for the disc The programs are will be erased. also cleared when the disc is removed. 21 Additional Information Last Condition DVD This CD player Controlling Memory memorizes the settings user for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings Notes -- You control the sound level, can Settings are stored in memory for use any time. This player does not memorize settings of a disc if you switch off the player before commencing to play You control the sound level, can Screen Saver picture screen saver Player in appears when you leave the holding down TV POWER button, press the number buttons to select the manufacturer code for While 1 2 for about five If minutes, the DVD turn itself off. them Player (see the table below). Release TV POWER button. After the Screen Saver has been will source, and Code numbers of controllable TVs stop mode for about five minutes. engaged automatically input code. your TV DVD and remote power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer it. The input source, supplied power switch of your LG TV with the control. memo- rized, the latest stop position is automatically recalled. -- other TVs with the remote control VCD1.1 more than one one code number is listed, try entering at a time until you find the one that works with your TV. Video Mode VCD2.0 DVD Setting Manufacturer Code Number VCD1.1 LG / GoldStar 1 With certain discs, the playback picture may be flickering or Dot Crawl is shown on straight lines. That means Vertical interpolation or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the (Default), Zenith 1,3,4 Samsung 6,7 Sony 8,9 Hitachi 4 2 video mode. Note the video mode, press and hold DISPLAY about 3 seconds during disc playback. The new video To change mode number selected is the TV displayed quality has improved. procedure until picture quality on your TV, some or all buttons may not the TV, even after entering the correct manufacturer code. Depending function screen. Check whether the video If not, repeat the above is If you enter a new code number, the code number entered will be erased. previously improved. Video mode MODE1 → change MODE2 → When you replace the batteries of the remote, the code number you have set may be reset to the sequence: MODE3 → MODE1 default If you turn off the power, the video mode will be back to initial state (MODE1). setting. Set or video Descriptions for Video Modes material of the DVD video material (film material) is determined from disc information. source the appropriate Select You must select the appropriate system mode for your If NO DISC system. appears in the display window, press and hold PAUSE on the front panel for more than TV MODE2: Suitable for 5 seconds to be able to select material recorded or MODE3: playing film based content or video based by the progressive scan method. Suitable for playing video based content with compar- atively little motion. code number again. System Detailed MODE1: The on on ? a system (PAL, NTSC, AUTO). When the selected system does not coincide with the system of your TV, normal color picture may not be displayed. AUTO: Note The video mode setting only works when the Scan mode is set to "On" in the Setup menu. Progressive Select when DVD NTSC: is connected with Select when DVD player is connected with player is connected with NTSC-TV. PAL: Select when DVD PAL-TV. 22 player Multi system TV. Troubleshooting Check the following guide for the possible cause of a problem before service. contacting Cause Symptom Correction No power. The power cord is disconnected. the power cord into the wall outlet Plug securely. The power is on, but the DVD player does No disc is inserted. Insert a disc. (Check that the DVD or, audio CD indicator in the display window is lit.) not work. No The TV is not set to receive DVD picture. signal output. Select the the TV on player appropriate video input mode the picture from the DVD so appears on the TV Connect the video cable The video cable is not connected screen. securely. securely. No sound. The connected TV power is turned off. Turn The Progressive Scan is set to "On" on the setup menu but is connected to a standard(analog) television. Set The equipment connected with the audio cable is not set to receive DVD Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player. signal output. The audio cables are not connected on the TV. Progressive Scan (see page 12). to "Off" Connect the audio cable securely. securely. The power of the equipment connected with the audio cable is turned off. The Digital Audio Output position. is set to the playback picture is The disc is on the equipment connected with Set the Digital Audio Output to the position, then turn on the DVD player again by pressing POWER. correct wrong The Turn the audio cable. Clean the disc. dirty. poor. The DVD not start player does playback. No disc is inserted. Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.) An unplayable disc is inserted. Insert a playable disc. the disc (Check type, color system, and Regional code.) The disc is placed upside The disc is not The remote control does not work properly. placed Place the disc with the down. down. within the guide. playback Place the disc on the disc tray inside the guide. The disc is dirty. Clean the disc. The level is set. Cancel the Rating function the rating level. Rating The remote control is not pointed at the remote sensor of the DVD player. correctly change Point the remote control at the remote of the DVD player. sensor the remote control within 23 ft The remote control is too far from the DVD player. Operate (7 m). There is an obstacle in the path of the remote control and the DVD player. Remove the obstacle. The batteries in the remote control exhausted. Replace are or side the batteries with new ones. 23 OPERATION Language Code Enter the (See appropriate 12). List code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" page Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili 6583 Assamese 6976 Greek 7773 Maori 8386 Swedish 6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog 6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 Tajik 6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil 6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar 6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu 6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai 6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan 6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya 6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga 7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish 6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen 7577 Cambodian 7384 Italian 8084 Portuguese 8487 Twi 6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian 9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu 6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek 7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese 6783 Czech 7575 Kazakh 8377 Samoan 8679 Volap k 6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh 7876 Dutch 7579 Korean 7168 Scots Gaelic 8779 Wolof 6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa 6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish 6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba 7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu 24 Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 14). Code Country Code Country Code Country Code AD Andorra ER Eritrea LC Saint Lucia SC Country Seychelles AE United Arab Emirates ES Spain LI Liechtenstein SD Sudan AF ET Ethiopia LK Sri Lanka SE Sweden AG Afghanistan Antigua and Barbuda FI Finland LR Liberia SG Singapore AI Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan AN Netherlands Antilles FO Faroe Islands LV Latvia AO Angola FR France LY Libya SK Slovak AQ Antarctica FX France MA Morocco SL Sierra Leone AR Argentina (European Territory) MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE MK Macedonia ST Saint Tome and AZ Azerbaidjan GF Georgia French Guyana ML Mali SU Former USSR BA Bosnia-Herzegovina GH Ghana MM El Salvador Barbados GI Gibraltar MN Myanmar Mongolia SV BB SY Syria BD Bangladesh GL Greenland MO Macau SZ Swaziland BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad BG Bulgaria GP MR Mauritania TF BH Bahrain GQ Guadeloupe (French) Equatorial Guinea MS Montserrat BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S. MU Mauritius TH Thailand BM Bermuda Isls. MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY TN Tunisia BS Bahamas GY MZ TO Tonga BT Bhutan HK Guyana Hong Kong Malaysia Mozambique NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia TR Turkey BW Botswana Islands NE Niger TT Trinidad and BY Belarus HN Honduras NF Norfolk Island TV Tuvalu Georgia & S. Sandwich (USA) Mayen Islands Republic Principe French Southern Territories (French) Tobago BZ Belize HR Croatia NG Nigeria TW Taiwan CA Canada HT Haiti NI Nicaragua TZ Tanzania CC Cocos HU Hungary NL Netherlands UA Ukraine CF (Keeling) Islands Central African Republic ID Indonesia NO Norway UG Uganda CG Congo IE Ireland NP Nepal UK United CH Switzerland IL Israel NR Nauru UM USA Minor CI Ivory Coast IN India NU Niue CK Cook Islands IO British Indian Ocean NZ New Zealand US United States CL Chile Territory OM Oman UY Uruguay CM Cameroon IQ Iraq PA Panama UZ Uzbekistan CN China IR Iran PE Peru VA Vatican CO Colombia IS Iceland PF VC Saint Vincent & CR Costa Rica IT Italy PG Polynesia (French) Papua New Guinea CS Former Czechoslovakia JM Jamaica PH Philippines VE Venezuela CU Cuba JO Jordan PK Pakistan VG CV Cape Verde JP Japan PL Poland VI Virgin Islands (British) Virgin Islands (USA) CX Christmas Island KE Saint Pierre and VN Vietnam Cyprus KG Kenya Kyrgyzstan PM CY PN Pitcairn Island VU Vanuatu CZ Czech KH Cambodia PR Puerto Rico WF Wallis and Futuna Islands KI Kiribati PT Portugal WS Samoa DJ Republic Germany Djibouti KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts & Nevis PY Paraguay YT DM Dominica KP North Korea QA Qatar YU Mayotte Yugoslavia DE Anguilla Kingdom Outlying Islands Miquelon City State Grenadines DO Dominican KR South Korea RE Reunion ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman Islands RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands Republic (French) 25 REF NC Specifications General Power Power requirements AC 110-240V consumption 12W Dimensions Mass (approx.) , 50/60 Hz 430x39x242mm(WxHxD)withoutfoot 2.2 (approx.) kg Operating temperature 5˚C to 35˚C Operating humidity 5%to90% System Laser Semiconductor laser, Signal system PAL/NTSC Frequency DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto22kHz response wavelength 650 nm CD:8Hzto20kHz ratio Signal-to-noise (ANALOG OUT More than 100dB Harmonic distortion Less than 0.008% Dynamic More than 100 dB range More than 95 dB connectors only) (DVD) (CD) Outputs VIDEO OUT 1 Vp-p 75 Ω, sync negative, RCA jack x 1 S-VIDEO OUT (Y) (p-p), (C)0.3V(p-p)75Ω COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 Audio output (digital audio) 0.5V(p-p),75Ω,RCAjackx1 Audio output (optical audio) 3 V Audio output (analog audio) 2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1 1.0 V 75 (p-p), 75 Ω, negative sync, Mini DIN 4-pin Ω, Optical connector x x x 1 1 1 Accessory Videocable.......................1 Audiocable.......................1 Remotecontrol....................1 Batteries.........................2 Design and specifications are Manufactured under license from subject to change without notice. Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol Laboratories. DTS and DTS Digital Outare registered trademarks of Digital Theater 26 Systems, Inc. are trademarks of Dolby P/NO : 3834RD0015D
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project