LG VC8404M Owner’s Manual

LG VC8404M Owner’s Manual
DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
VC8404M
PAL
Before
connecting, operating
or
adjusting this product,
carefully and
read this instruction booklet
please
completely.
CAUTION
To reduce the risk of electric
Warning:
shock, do
of this
not
iceable
the
remove
product.
There
parts inside. Refer servicing
qualified
service
Warning:
To reduce the risk of fire
shock, do
product
to
or
to
personnel.
electric
rain,
back
cover or
are no user-serv-
or
not expose this
dripping
SERIAL NUMBER:
splashing water,
not place objects
or
moisture. Do
filled with water such
as
vases,
on
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
IN CASE OF 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS ECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE 'STANDARD
DEFINITION' OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH
THIS MODEL 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
the
product.
You can find the serial number on the back of the unit.
This number is unique to this unit and not available to
others. You should record requested information here
and retain this guide as a permanent record of your
purchase.
Model No.
Serial No.
______________________________
______________________________
Date of Purchase_________________________
Warning: This digital video disc player
employs a laser system. Use of controls,
adjustments, or the performance of
procedures other than those specified
herein may result in hazardous radiation
exposure.
Features:
?
Complete versatility
or VHS Tapes.
?
Watch
?
?
Warning:
To
prevent direct exposure
to
laser beam, do not open the enclosure.
Visible laser radiation when open.
Never stare
laser beam.
Warning:
directly
?
a
confined space such
similar unit.
as a
product
book
in
a
case or
(unless
DVD is copy
notes on
protected
controlling
uses one
set of controls to
this
operate both
DVD and VCR. The
following buttons
successfully controlling each part.
are
helpful
in
POWER Button
Press the POWER button
or
front
panel
on
the remote control
to turn on this unit.
DVD Button
2 Press
DVD button on the remote control when
you want to control the DVD.
The DVD indicator will light on the front panel
display to show that the DVD is selected.
Copyrights:
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
2
TV show to the VCR.
unit
This product is manufactured to comply
with the radio interference requirements
of EEC DIRECTIVE 89/336/EEC,
93/68/EEC and 73/23/EEC.
on
a
Hi-Fi Stereo VCR.
1
Notes
recording
Records from DVD to VHS
with Macrovision).
Important
into the
play DVD, DivX, VCDs, audio CDs
Remote controls both DVD and VCR decks.
This unit
Caution: Do not install this
DVD while
to
VCR Button
3 Press the VCR button
on
the remote control
when you want to control the VCR.
The VCR indicator will light on the front
display
4
panel
to show that the VCR is selected.
DVD/VCR Button
Press the DVD/VCR button on the front panel to
control between the DVD and the VCR.
toggle
Contents
PlayingaDVDorVideoCD...............26-28
Introduction...................4
SymbolUsedinthisManual...............4
AbouttheSymbolDisplay..............4
NotesonDiscs..........................4
HandlingDiscs........................4
StoringDiscs.........................4
CleaningDiscs........................4
TypesofPlayableDiscs...................5
Regionalcode..........................5
Disc-relatedterms.......................6
FrontPanel.............................7
DisplayWindow.........................7
RemoteControl.........................8
RearPanel.............................9
GeneralFeatures.......................26
MovingtoanotherTITLE...............26
.26
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................26
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.
.
.
.
.
.
.
.
.
.
.
.
.26
.27
SlowMotion.........................27
Random............................27
RepeatA-B..........................27
Repeat.............................27
3DSurround.........................27
TimeSearch.........................27
Zoom..............................28
MarkerSearch.......................28
SpecialDVDFeatures...................28
TitleMenu..........................28
DiscMenu..........................28
InstallationandSetup
.
.
.
.
.
.
.
.
.10
.
CameraAngle.......................28
.28
ChangingtheAudioLanguage
.
Connecting to a TV & Decoder (or Satellite) .10
.11
Connecting to Optional Equipment
.12-16
BeforeOperation-VCRpart.
.12
Tuning in a video channel on your TV
.12
Using your VCR for the very first time
.13
SettingtheclockManually.
Tosetthecoloursystem..............13
.14
Howtousingthemainmenu.
.14
Tuning in TV Stations Automatically
.15
TuninginTVStationsManually.
.16
Changing the order of TV Stations
DeletingTVstations..................16
.17-21
BeforeOperation-DVDpart.
On-ScreenDisplay......................17
InitialSettings.......................18-21
GeneralOperation....................18
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
LANGUAGE.........................18
MenuLanguage....................18
DiscAudio/Subtitle/Menu.
.18
DISPLAY...........................19
.
.
.
.
.
.
.
.
.
.
TVAspect.........................19
DisplayMode......................19
ProgressiveScan...................19
TVOutputSelect....................19
AUDIO.............................20
.20
.20
.20
Vocal.............................20
DolbyDigital/DTS/MPEG.
SampleFreq.(Frequency)
DynamicRangeControl(DRC).
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AutoPlay..........................21
DivX(R)VOD.......................21
LOCK(ParentalControl)................22
Rating............................22
.22
Password(SecurityCode).
CountryCode......................22
.
.
.
.
.
.
.
.
.
.
.
Operation....................23
Playingatape.......................23-25
.23
CM(CommercialMessage)Skip
OPR (Optimum Picture Response)
.23
.24
InstantTimerRecording(ITR).
Timer recording using On Screen Display
.25
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.29
PlayinganAudioCDorMP3/WMADisc
AudioCDandMP3/WMADiscFeatures
.30
Pause..............................30
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTrack................30
RepeatTrack/All/Off...................30
Search.............................30
Random............................30
RepeatA-B..........................30
3DSurround.........................30
ProgrammedPlayback.....................31
.31
RepeatProgrammedTracks.
.31
ErasingaTrackfromProgramList
.31
Erasing the Complete Program List
ViewingaJPEGDisc......................32
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow..........................32
StillPicture..........................32
MovingtoanotherFile.................32
Zoom..............................32
Torotatepicture......................32
To listen to MP3/WMA music watching picture
.32
.33
PlayingaDVDVRformatDisc.
.
.
.
.
.
.
.
.
.
.
.
.
.
MaintenanceandService.................33
PlayingaDivXMovieDisc................34
Additional Features-VCR
part
.
.
.
.
.
.
.
.
.
.35-36
.
OnScreenDisplay....................35
TapeCounterMemoryStop.............35
Lock(ChildLock).....................35
.35
VideoDoctor(Self-Diagnosis).
Hi-FiStereoSoundSystem.............36
.36
WideScreenCompatibility16:9
.
OTHERS...........................21
PBC.............................21
.
Subtitles............................28
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Tosetthedecoder....................36
AdditionalFeatures.....................37
LastSceneMemory...................37
ScreenSaver........................37
VideoModeSetting...................37
Controlling other TVs with the remote control 37
CopyingfromDVDToVCR...............38
.38
Recording from another video recorder
.
.
.
.
Reference....................39
LanguageCodes.......................39
CountryCodes.........................39
Troubleshooting........................40
Specification..........................41
3
Introduction
About the
To
proper use of this product, please read this
owner's manual carefully and retain for future
Symbol Display
ensure
reference.
"
"
may appear on your TV display during
and indicates that the function explained in
operation
this owner's manual is not available
This manual
provides
information
on
the
operation
on
that
specific
DVD video disc.
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
Notes
Symbol
Used in this Manual
on
Handling
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
of
Discs
Discs
Do not touch the
the
disc
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the disc.
electric shock.
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to cause harm to the
other material
damage.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
making
the task easier.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
A section whose title has
is applicable only
symbol.
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
DivX
4
to the disc
of the
following symbols
represented by the
one
DivX Discs
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
vinyl
records.
Types
of
Playable
Discs
Regional
code
This DVD
player
is
designed and
playback of region
DVD
manufactured for
(8cm/12cmdisc)
encoded DVD software. This unit
only
Video CD
(VCD)
(8cm/12cmdisc)
DVD discs labeled "2"
Notes
Audio CD
?
(8cm/12cmdisc)
on
Regional
play
clearly
a
globe
visible
on
with
the
one or more
cover.
This number must match your DVD
code or the disc cannot play.
In addition, this unit
plays
DivX file, DVD -R, DVD +R,
?
DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and
CD-R / CD-RW that contains audio titles, MP3, WMA,
and/or JPEG files.
This indicates
2
"ALL".
Codes
Most DVD discs have
numbers in it
or
"2"
can
player's regional
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears on the TV screen.
product feature that is
capable
playing DVD-RW discs
recorded with Video Recording format.
a
of
Notes:
?
?
?
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g.,
heart-shaped or octagonal) since they may
(the
result in
malfunctions.
Notes
on
DVDs and Video CDs
Some
playback operations
of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according
to disc content
manufacturer, therefore
designed by the software
playback features may
some
not be available or other functions may be added.
Manufactured under license from
Dolby
"Dolby", "Pro Logic", and the
symbol are trademarks of Dolby
Laboratories.
double-D
Laboratories.
DTS and DTS
Digital
Digital Out
Systems,
Theater
are
trademarks of
Inc.
5
PBC:
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
Disc-related terms
DVD±R/DVD±RW
DVD -R and DVD +R
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
are
only
two standards for
meaning the DVD content can be
Single-sided discs can hold
re-writable media,
erased and re-recorded.
4.38
Gigabytes
and double-sided discs hold twice
as
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
CDs.
discs.
(DVD video discs only)
generally a distinct section of a DVD disc. For
example the main feature could be title 1, a documentary describing how the film was made could be title 2,
VCD
and cast interviews could be title 3. Each title is
much. There
are no
dual
sided recordable
layer single
(Video CD)
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
with
Title
A title is
assigned
easily.
a
reference number
enabling
stereo sound.
quality
Chapter (DVD video discs only)
chapter is a segment of a title such
MPEG
A
MPEG is
an
you to locate it
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
film
interview in
series. Each
as a scene
in
a
is
chapter
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
or one
a
may not be recorded.
audio.
Scene
MP3
On
MP3 is
audio
popular compression format used for digital
files that yields very high near-CD quality.
a
WMA
Windows media audio file. A type of
developed by Microsoft Corp.
coding
/
decoding
(VCD)
video CD with PBC
(playback control) functions,
pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
moving pictures
and still
Track
JPEG
A distinct element of audiovisual information, such
Expert Group. JPEG is a compressed
that allows you to save images with no limit
Joint Pictures
file format
on
the number of colors.
as
the
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow one
DivX
track of video
DivX is the
of
name
which is based
on
a
revolutionary
the
new
MPEG-4
new
compression
play DivX
standard for video.You will be able to
movies
6
using
this DVD
player.
video codec
of audio.
(with multiple angles)
and several tracks
Front Panel
POWER
Switches the unit to ON
or
OFF.
Reverse
Go to
Skip/Scan, Rewind (
)
beginning of current chapter/track or
Press and hold for two seconds for
a
fast
to PREVIOUS
chapter/track.
search.
reverse
Rewinds the tape.
Forward
Skip/Scan, Fast-Forward (
chapter/track.
)
Go to NEXT
Press and hold for two seconds for
a
fast forward search.
Winds the tape forwards.
Disc
Tray
STOP
(
Insert
A
a
disc here.
) Stops playback.
PAUSE/STEP
Pause
press
( /
)
playback temporarily /
repeatedly for frame-by-frame playback.
DVD OPEN/CLOSE
Opens
or
(
VCR Record
)
closes the disc tray.
DVD/VCR Selector
Tape Compartment
Display
DVD to VCR
Copy
window
Audio IN
Shows the current status of the unit.
Button
Video IN Jack
Remote Sensor
PLAY
( G)
Starts playback.
(L/R)
Jacks
Point the remote control here.
Channel
Programme Selectors.
Tape Eject
Display
Window
Child Lock is
engaged
DVD+VCR is in timer
timer
Indicates repeat mode.
Indicates the
recording
is
recording
programmed.
or a
A Cassette is in the VCR deck.
VCR deck is selected.
Progressive
Scan is set to On mode.
VCR
recording
is
engaged.
DVD to VHS copy is in progress.
A disc is loaded in the DVD deck.
(Lights when a disc is loaded in the DVD
deck and flashes when no disc is loaded.)
Indicates TV mode.
Notes on page
(See
24.)
DVD deck is selected.
DVD
VCR
P
REC
TV
Indicates total
playing time/elapsed
time/current time
7
Remote Control
POWER
Switch this unit ON
OPEN/CLOSE
EJECT
Open or close the the disc
OFF.
or
DVD/VCR select button
operational mode of
remote control.
-
Selects
-
AV
Select input
into tape.
0-9 numerical buttons
Select numbered items in a menu.
(see
picture
PAUSE/STEP (
)
playback temporarily / press
repeatedly for frame-by-frame
playback.
PLAY (G)
Starts playback.
STOP(A)?
Stops playback.
?
Access
?
?
?
audio
video CD
language (DVD).
a
subtitle
language.
camera
angle
if available
ZOOM
video
image.
LOCK
input sources
(Child Lock)
Switch the Child Lock
-
Play
a
REC/ITR
Record your
-
-
of
ANGLE
Enlarge
PR/TRK(+/-)
Select the
menu
?
Select channel programme of VCR.
To adjust tracking.
To control vertical tremble during
picture still.
-
an
Select DVD
?
menu
?
ENTER/OK
selection.
DISC MENU
a DVD disc.
on
into tape.
and off.
TITLE
Display the title
available.
menu
A-B/LP
menu.
SUBTITLE
Select
?
FGDE(left/right/up/down)
-
setup
AUDIO
Select
counter.
of
or remove
Displays the
with PBC.
Access the On-Screen Display.
Shows you the current time or
menu
off TV sound.
RETURN
DISPLAY
CLK/CNT
Access
on or
SETUP/ i
?
Acknowledge
source.
SKIP(./>)
Go to next chapter or track. Returns to
beginning of current chapter or track
or go to previous chapter or track.
Pause
-
off the TV.
on or
Adjusts TV's volume.
MUTE: Turns
search.
item in the
37)
TV VOL +/--:
or
-
an
recording
TV PR +/--: Selects TV's channel.
forward.
VCR: Rewinds the tape during the
STOP mode, for fast reverse picture
search and Advances the tape during
Select
for
TV AV: Selects the TV's
(m/M)
the STOP mode, fast forward
p.
TV POWER: Turns
BACKWARD / FORWARD
DVD: Search backward
source
TV Control Buttons
TV/VCR
Switch between your TV's tuner
and the VCR's internal tuner.
-
tray.
Tape Eject.
menu
of the disc if
PROGRAM
Access or remove program menu.
?
MARKER
Mark any point during playback.
?
?
Repeat sequence.
recording speed of
?
the tape.
RANDOM/CM SKIP ?
tracks in random order.
CM SKIP
SEARCH
MARKER SEARCH
Display
?
menu.
CLEAR
Clear a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
?
REPEAT
Repeat chapter, track, title, all.
-
-
-
Remote Control
Remote control
Operation
Point the remote control at the remote
sensor
Detach the
press the buttons.
Do not mix old and
new
batteries and
different types of batteries such
alkaline, etc.
8
battery
as
installation
and
never
standard,
mix
AAA AAA
battery
cover on
the
rear
of
the remote control, and insert two batteries
(size AAA)
aligned correctly.
with
and
Rear Panel
VIDEO/AUDIO
Connect to
a
OUT(Left/Right) (DVD/VCR OUT)
inputs.
TV with video and audio
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(DVD
EXCLUSIVE
Connect to
a
TV with Y Pb Pr
AERIAL
AUDIO OUT
Connect the aerial
Connect to
using
this
(Y
Pb
Pr)
OUT)
inputs.
(Left/Right) (DVD EXCLUSIVE OUT)
amplifier, receiver or stereo system.
an
EURO AV2 DECODER
jack.
Connect to
pay-TV
decoder
or
another video recorder.
OPTICAL
(Digital audio out jack)
digital (optical) audio
equipment.
Connect to
S-VIDEO OUT
Connect to
EURO AV1 AUDIO/VIDEO
Connect to your TV set
COAXIAL
a
(VCR
or
(DVD
EXCLUSIVE
TV with S-Video
IN+OUT / DVD
OUT)
input.
OUT)
another video recorder.
(Digital audio out jack) (DVD EXCLUSIVE OUT)
digital (coaxial) audio equipment.
Connect to
RF.OUT
(DVD/VCR OUT)
using this jack.
Connect to your TV
AC Power Cord
Connect to
a
power
source.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
9
Installation and
Setup
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Tips:
Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the unit.
1.
Please refer to the manuals of your TV, Stereo
or other devices as necessary to make the
best connections.
Connect the COMPONENT/ PROGRESSIVE SCAN
VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using the Y Pb Pr cable.
2.
Connect the Left and Right AUDIO OUT jacks of the
DVD Player to the audio left/right in jacks on the TV
using the audio cables.
System
For better sound reproduction, connect this unit's
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page
11.
Caution:
Make sure this unit is connected directly to the TV.
Set the TV to the correct video input channel.
Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Connecting to
(or Satellite)
a
TV & Decoder
Make one of the following connections, depending
the capabilities of your existing equipment.
on
You must set the "TV Output Select" option to use
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
and SCART jacks. (See "TV Output Select" on
page
19.)
Basic connection
1.
2.
2.
Set the
Progressive to "On" on the setup menu for
progressive signal, see page 19.
Once the setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that "DISC" is displayed on the display
window.
2) Press STOP and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack) or S-VIDEO
connection.
Rear of this unit
(DVD
exclusive out
connection)
(AV)
(RF)
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel
of this unit.
Connect the supplied RF antenna cable from the
RF.OUT jack on the rear panel of this unit to your
television's Antenna Input.
Component
2.
Player.
Notes:
Rear of TV
AERIAL
DVD exclusive out connection
1.
the DVD
on
Connect the EURO AV1 AUDIO/VIDEO on the
rear panel of this unit to the SCART input socket
on the TV using a SCART lead.
Some TV broadcasters transmit encoded television
signals which you can only see with a purchased
or rented decoder. You can connect such a
decoder (descrambler) to this unit.
Basic connection
1.
Progressive Scan
Video
VIDEO
INPUT
COMPONENT VIDEO INPUT/
PROGRESSIVE SCAN
Pr
(Color Stream )
Pb
Y
AUDIO INPUT
L
SCART INPUT
S-
UT
R
connection
Connect the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks on the DVD Player to
the corresponding in jacks on the TV using the
Y Pb Pr cable.
Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on
the TV using the audio cables.
Decoder
(or Satellite)
S-Video connection
1.
2.
Connect the S-VIDEO OUT jack on this unit to the
S-Video input jack on the TV using the S-Video
cable.
Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on
the TV using the audio cables.
Progressive
Scan
(ColorStream Pro)
If your television is
a
high-definition
or
connection
"digital ready"
television, you may take advantage of the DVD
Player's progressive scan output for the highest video
resolution
10
possible.
Rear of this unit
(Basic connection)
Note:
If the TV has an S-video input, connect the DVD player
with the S-video cable. When using an S-video cable, do
not connect the yellow video cable.
Connecting
Optional Equipment
to
Connecting to an amplifier equipped with
channel analog stereo or Dolby Pro Logic
II/Pro Logic
two
Connect the Left and Right AUDIO OUT jacks on this
unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables.
Notes:
If the audio format of the
the
capabilities of
produce a strong,
To
see
digital output
does not match
your receiver, the receiver will
distorted sound
or no
sound at all.
the audio format of the current DVD in the
On-Screen
Display,
press AUDIO.
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
channel
1.
2.
Connect this unit's DIGITAL AUDIO OUT
jack
(OPTICAL or COAXIAL) to the corresponding
jack on your amplifier. Use an optional digital
(optical or coaxial) audio cable.
You will need to activate this unit's
(See "AUDIO"
Digital
on
InstaliodSeup
in
digital output.
20).
page
Multi-channel sound
A
digital multi-channel
sound quality. For this
connection provides the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS Licensing agreement, the digital
output will be in DTS digital out when DTS audio
stream is selected.
Rear of this unit
2 channel
analog
stereo
or
Pro
Dolby
Logic
II/Pro
Logic
connection.
DVD exclusive out
DVD/VCR OUT
Digital
COAXIAL
DIGITAL INPUT
multi-channel connection
L
(DVD
exclusive out
connecttion)
R
OPTICAL
AUDIO INPUT
DIGITAL INPUT
Amplifier (Receiver)
11
Before
in
Tuning
a
Operation-VCR part
video channel
6.
on
Press PROG. 3
your TV
or 4 on
the front of your VCR for
than 4 seconds.
more
RF36 will appear in the display window.
following picture will be displayed on the TV
The
Notes:
screen.
The output frequency of this video recorder
(VCR) is set at UHF channel 36. If channel 36
already used by another TV station, or if
picture is distorted, you can change the
transmitter channel of your VCR. Stages 5
will show you how to change the output
frequency of your VCR.
is
Your TV receives
recorder
(VCR)
signals
the
8
~
7.
from the video
a
channel number
on
video channel built
36
Press PROG. 3
or 4
to select another video
can also set it to "OFF" if there is any
interference when your TV is connected to the
VCR with a SCART lead.
You
and tune it in
already have a dedicated
into it, usually called AV.
CHANNEL
channel. You may select any channel number
between 22 and 68.
like another TV station. You
your TV
so that you may watch video
tapes. If you have used a SCART or AUDIO
and VIDEO cables then your TV should
have to select
RF
PSET
R
8.
Select
a
TV channel number
on
which you wish to
watch video's.
I on the front of your VCR when you
Press
have finished.
1.
Make
VCR
that you have correctly installed your
described earlier in this book.
sure
as
Press POWER to turn
Turn
2.
on
your VCR.
Tune this channel
so
appears.
Store this channel
on
that
a
bright
blue
screen
your TV.
your TV.
on
Insert a pre-recorded video tape into your VCR
and press PLAY on the remote control.
Select a TV channel number on which you wish to
watch video's.
Don't worry if you don't have a video-tape to play
at this stage! If you switch your VCR on and
continue stages 3
4, instead of seeing video
~
playback
tune your TV until you see a
bright
Note:
Make
sure
VCR and
that you have correctly installed your
tuned in a dedicated
successfully
on your TV. If you do not tune in a
dedicated video channel on your TV you will be
unable to view and record video tapes!
video channel
blue
screen.
3.
Tune this channel until the video
picture
is
sharp
and the sound is clear.
If you have used a SCART or AUDIO and VIDEO
cables you will not have to tune your TV, simply
select the AV channel. The AV channel is already
pre-tuned
4.
for
optimum
video
playback
on
your TV.
Store this channel
on your TV.
You will need to look at the TV instruction book if
Using your VCR for
the very
first time
Following picture
will
display
on
the TV
TV stations,
To make
tuning
3 to 4
shown "ACMS"
as
please follow stages
(see p.14).
you do not know how to do this.
5.
Only carry out stages 5 8 if you cannot
obtain clear video playback as described in
~
stages
1
4. Select a TV channel number on
~
which you wish to watch video's.
Make sure that your VCR is in standby pressing
POWER on the remote control (only the clock will
be
12
displayed).
screen
when you have just connected your video
recorder for the very first time.
A
BD
CH
NN L
Pr-12
ACMS
DK
E
F
PSS FOTHERS
the clock
Setting
To set the colour system
Manually
The clock in your VCR controls time and date
settings for your VCR.
automatically during ACMS
(Automatic Channel Memory System) when
The clock is set
VCR detects
Teletext
a
channel that broadcasts
your
a
1.
Press i.
2.
The main
3.
Press 1
or
Press 3
or 4
4.
If the broadcast
signal.
the clock will not be set and
signal is weak
will require setting
will appear
menu
on
the TV
screen.
2 to select the SYSTEM and press OK.
to select
according
to the COLOUR
system used.
manually.
1.
Press i.
Press 1
or
2 to select TIME DATE.
Press OK.
VCR
SYS-
REC
TEM
Dr.
SYS-
The auto
pressing
adjust
mode
be set to "OFF"
can
D or E if you want to set the time
ON
OFF
by
InstaliodSeup
TEM
fOSD
i
DECO
16:9
4:3
DER
OPR
manually.
Press OK.
5.
2 to select the RF AUDIO.
Press 1
or
Press 3
or 4
to select
according
to the RF AUDIO
used.
AUTO
ADJUST
:
ON
--
12
TIME
DATE
OK
i
VCR
SYS-
REC
E
TEM
Dr.
ON
OFF
6.
HHMNDDMMYY
--
:.
-
-
--
--
--
Press i to
remove
SYSTEM
fOS
4:3
DER
the
OPR
menus
i
from the TV
screen.
---
.
12
TIME
DATE
2.
i
Use the numbered buttons
to alter the
the remote control
on
HOURS, MINUTES, DAY, MONTH and
YEAR.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The
day
of the week will appear
automatically
when you enter the year.
HHMNDDMMYY
8
:.
0010104THU
.
12
TIME
DATE
3.
If you make
a
mistake press 1
i
or
2 and enter the
correct details.
4.
Press i.
13
How to
using
the main
This VCR
easily
displayed
be
the
can
menus
The
menu
programmed by using
on screen.
controlled from the Remote
menus are
Control Handset.
Switch
1.
your TV set and video recorder
the POWER button.
on
pressing
by
The main
If the TV broadcast
this
1.
will appear
menu
on
the TV
is weak your VCR
signal
may not detect the necessary information and
will not be able to store them correctly. To overcome
turn to the MANUAL TUNING
problem please
section
Press i button.
2.
Tuning in TV Stations
Automatically
on
page 15.
Press POWER to turn
on
your VCR.
screen.
2.
Press i button.
The main
Press 1
will appear on the TV
2 to select the ACMS.
menu
or
screen.
Press OK.
VCR
Pr-12
P
SET
R
ACMS
TIME
DATE
16:9
4:3
DECODER
OPR
SYSTEM
Dr.
fOSD
ON
OFF
12
REC
Pr-12
P SET
R
REC
Timer
recording setting (see p. 25).
PR SET Manual tuning setting (see p. 15).
ACMS ACMS (Automatic Channel Memory
System) (see p. 14).
TIME DATE Date & clock setting (see p. 13).
SYSTEM To set the Colour TV System
(see p. 13).
Dr. To check a problem with your VCR
(see p. 34).
F.OSD ON/OFF To display the operational
-
fOSD
ON
OFF
DECODER
16:9
4:3
TIME
DATE
VCR
SYS-
Dr.
TEM
Pr-12
OPR
-
-
-
-
A
BD
CH
NN L
DK
E
F
PSS FOTHERS
-
Pr-12
ACMS
-
mode of your VCR
3.
16:9/4:3
-
p. 35).
To select the aspect ratio of your TV
(see
DECODER
OPR
-
To
p.
36).
pay-TV decoder (or
Satellite) with your VCR
(see p. 36).
To improve the playback picture
(see p. 23).
-
Press 1
or
2 to select COUNTRY.
(A:Austria, B:Belgium, CH:Switzerland,
D:Germany, DK:Denmark, E:Spain, F:France,
I:Italy, N:Norway, NL:Nertherlands, P:Portugal,
S:Sweden, SF:Finland, OTHERS)
Press OK again to start the automatic tuning
(see
use a
process.
The VCR's clock will be set
automatically when
tuning has finished. If the clock is wrong
please see "Setting the clock manually" on page 13.
automatic
Tip:
You
can
setup
3.
change the menu language on the DVD
(See the Menu Language on page 18.)
menu.
Press 1 and 2 to select the desired
Press OK and press 3
4.
Press i to
remove
the
or 4
C02
00
RAI 1
02
C03
00
RAI 2
03
C04
00
RAI 3
menu.
S
to select.
menus
01
from the TV
screen.
4.
The TV STATION TABLE will appear when
is complete.
Press i to
save
your
settings.
02
C03
00
03
C04
00
RAI 3
04
C05
00
TVE
05
C06
00
06
C07
00
CNN
07
C08
00
TMC
08
C09
00
PSET
R
14
E
Pr-12
ACMS
RAI 2
HRT
YLE1
MOVE
:
DELETE
:
,
tuning
in TV Stations
Tuning
In certain
areas
Manually
of the country broadcast
4.
Searching
will
stop when it locates
signals
Press 3
to
or 4
correctly.
PR
CH
09
C10
You must tune in these weaker broadcast
manually
MFT
in order for your VCR to store
STATION
CHANNEL/CABLE
:
AV
PSET
R
them.
1.
station.
adjust.
may be too weak for your VCR's automatic
tuning process to find or assign TV stations
stations
a
Press 2 to select MFT.
5.
Press i.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
Press 2 to select STATION
that you may
so
name
your TV station.
Press OK.
screen.
The TV station
Press OK.
list will appear.
name
PR
CH
MFT
09
C10
00
VCR
Pr-12
REC
ACMS
TIME
DATE
DECODER
OPR
SYSTEM
Dr.
PSET
R
fOSD
ON
OFF
16:9
4:3
6.
Press D
E to select a station name from the list.
or
Press OK to select it.
PR
CH
01
MFT
STATION
00
PR-01
If your station
to
OK, but go
CHANNEL/CABLE
:
name
isn't
stage
7.
the list do not press
on
AV
PSET
R
2.
Press i.
The station table will appear.
Press 3 or 4 to select the programme number
that you want to tune (for example, PR 09).
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PSET
R
:
DELETE
:
MFT
00
You
can
change a TV station name manually
using the "standard" names.
rather than
Press G.
PR-08
MOVE
CH
C10
PSET
R
7.
02
PR
09
or 4
station
new
Press 1
,
to select letters and numbers for
Press 3
the
or
2 to
name.
move
back and forth between
characters.
3.
Press OK.
Press OK.
Press AV to select C
(Standard stations)
or
S
(Cable stations):
C02
-
C69, S01
-
S41.
PR
C09
Enter the channel number of station that you want
CH
MFT
C10
00
STATION
to tune with the numbered buttons or use 3 or 4
to find the
required
PSET
R
station.
8.
PR
09
CH
MFT
STATION
--
----
CHANNEL/CABLE
Press i, confirm the station
Press i again.
Your
new
TV station has
now
placement.
been tuned into your
VCR.
:
AV
If you wish to
stages 1 8.
manually
tune other stations
repeat
-
PSET
R
10
11
12
13
14
15
16
PSET
R
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
MOVE
:
DELETE
:
,
15
Changing
the order of TV Stations
After tuning TV stations into your VCR you may
wish to change the order in which they are stored
without having to retune them against! The instructions given on this page will show you how you can
simply move them into your desired order.
1.
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
TV Stations
Deleting
After tuning TV stations into your VCR you may
wish to delete a station.
The instructions given on this page will show you
how easily delete any unwanted TV stations.
1.
screen.
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
screen.
VCR
Pr-12
REC
VCR
Pr-12
REC
fOSD
ON
OFF
16:9
4:3
PR
ACMS
TIME
DATE
DECODER
OPR
CH
01
SYS-
ON
OFF
Dr.
TEM
MFT
STATION
00
PR-01
CHANNEL/CABLE
Press i.
Press 3
:
2.
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
CH
MFT
STATION
00
PR-01
:
AV
MOVE
:
DELETE
:
C02
00
Press i.
Press 3
or 4 to select the programme number
you want to delete. (for example, PR 03)
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
PR-07
PR-08
MOVE
:
DELETE
:
,
,
C03
00
PR-01
PR-02
04
C05
00
PR-04
05
06
C06
C07
00
00
PR-05
07
C08
00
PR-07
08
C09
00
PR-08
03
Press 1.
After a short while, the selected station will be
deleted.
PR-06
P
SET
R
to select the programme number
you want to move to (for example, PR 05).
or 4
01
C02
00
02
C03
00
PR-02
03
C05
C06
00
PR-04
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
04
Dr.
TEM
CHANNEL/CABLE
3.
Press 3
OPR
SYS-
PSET
R
PSET
R
3.
DECODER
AV
to select the programme number
you want to move (for example, PR 03).
Press 2.
02
16:9
4:3
PR
or 4
01
TIME
DATE
01
PSET
R
2.
ACMS
fOSD
00
PR-01
C03
00
PR-02
04
05
06
C06
00
PR-04
C04
C07
00
00
PR-05
PR-06
07
C08
00
08
C09
00
DELETE
PSET
R
PR-07
PR-08
:
:
,
Press i to remove the menus from the TV screen.
If you wish to delete other TV stations repeat
stages
05
C02
02
MOVE
4.
PR-01
01
1
-
3.
01
C02
00
PR-01
02
C03
00
PR-02
04
05
C04
00
PR-04
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
PSET
R
4.
Press OK.
The selected programme will be moved to the
new programme number.
If you wish to move other TV stations repeat stages 1 4.
Press i to remove the menus from the TV screen.
08
MOVE:
PSET
R
DELETE
:
,
-
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
04
00
PR-02
PR-03
PR-04
06
C07
00
PR-06
07
C08
00
08
C09
00
P
R SET
16
PR-07
PR-08
MOVE
:
DELETE
:
,
How to
selecting
Stored TV stations:
Stored TV stations can be selected in either of two
ways.
Press PROG. 3 or 4 to select different stations that
are tuned into your VCR.
You may also directly select stations using the
numbered buttons on the remote control.
Before
Operation-DVD part
On-Screen
You
the
Some items
the
use
general playback status on the TV
can be changed using the menu.
on-screen display:
display
can
screen.
To
Display
1.
Press DISPLAY
2.
Press v / V to select
Press b / B to
an
inputting
change
the
the title
For
number).
some
no
Number
also
functions,
Playback
Title
A-B
1/9
B, Numbers
provide
1/12
b /
B, Numbers
ENTER
0:20:09
Numbers, ENTER
language
Digital Audio
Output mode
b/Bor
and
AUDIO
InstaliodSeup
setting.
all of the features
button is
on-screen
b /
Audio
Subtitle language
Some discs may not
shown below.
If
1/3
Time search
setting. You can
appropriate (e.g.
Notes:
?
Title Number
Chapter
highlighted.
press ENTER to execute the
?
Selection Method
ENTER
item.
the number buttons if
use
Items
during playback.
The selected item is
3.
Example: On-Screen Display during
playing DVD Video
pressed for 10 seconds,
display disappears.
the
ABC
1 ENG
Angle
b/Bor
SUBTITLE
b/Bor
1/3
ANGLE
Sound
3D SUR
b/B
Status/Restrictions
Example: On-Screen Display during
playing VCD
Repeat
title
Repeat
sequence
Enter
Marker
a
Items
Selection Method
Track Number
MARKER SEARCH
123456789
Marker Search
Resume
Action
play
menu
from this
prohibited
or
1/3
B, Numbers
ENTER
Time search
0:20:09
Audio Channel
STEREO
point
not available
b /
(or PBC mode)
Numbers
ENTER
b/Bor
Sound
AUDIO
3D SUR
b/B
Example: On-Screen Display during
playing divx movie disc
Items
Selection Method
Track Number
1/3
b /
B, Numbers
ENTER
Time search
0:20:09
Audio
language
Digital Audio
Output mode
1
and
Subtitle language
Sound
MP3
ABC
ENG
3D SUR
Numbers, ENTER
b/Bor
AUDIO
b/Bor
SUBTITLE
b/B
17
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 18 to 21.
To
display
the
menu.
SETUP will take you back to initial
To go back to the
previous
move
alternate
18
menu
appears.
option
the selected item,
move
as
well
as
option
then
to the third level.
Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
additional steps.
Press SETUP
or
Menu
Language
Select
a
for the
language
PLAY to exit the
Original:
Refers to the
disc
recorded.
was
Setup
menu
and
on-screen
DVD
Setup
menu.
original language
Other: To select another
according
chapter.
reference
press CLEAR.
to the
If you
track
in which the
language, press number
corresponding 4-digit
language code list in the
enter the wrong language code,
buttons then ENTER to enter the
number
Use v / V to select the second desired
press B to
5.
Setup
setting for
setting(s).
Select
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
then press
to the second level. The screen shows
the current
Move
Select the
Use v / V to select the desired
require
Original
Disc Audio / Subtitle / Menu
Operation
2.
4.
Off
Disc Menu
display.
level:
Press SETUP. The
3.
Disc Subtitle
A second press of
the remote control.
on
1.
B to
Original
screen.
To go to the next level:
Press B on the remote control.
General
English
Language
Disc Audio
and exit the Menu:
display
Press SETUP to
Press b
Menu
4. When the confirm menu appears on your screen
DISPLAY
Cancel is
DISPLAY
TV
16
Aspect
Display
Mode
Progressive
TV
Output
:
to
9Wide
highlighted
highlight Enter.
as
default. Use the b button
Widescreen
Scan
5.
Off
Select
Pressing
scan
RGB
ENTER will set this unit to
Progressive
mode.
Caution:
Once the
Move
TV
DVD
Aspect
4:3
:
setting for progressive scan output is entered,
image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
an
Select
Select when
a
On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc tray.
See that "DISC" is displayed on the display window.
standard 4:3 TV is connected.
16:9 Wide: Select when a 16:9 wide TV is connected.
Display
Display
DVD
Mode
Press STOP and hold it for five seconds before
releasing
it. The video
standard
setting
visible
Mode
setting
works
only
when the TV
LetterBox:
TV
Displays a wide picture with
portions of the screen.
bands
on
the
upper and lower
Panscan:
Automatically displays the wide picture on
and cuts off the portions that do not fit.
the
progressive
InstaliodSeup
output will be restored to the
picture will once again be
analog
TV
or
monitor.
Select
Set this unit TV
Output Select options according
to the
type.
YPbPr: When your TV is connected with the
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
jacks
Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
To turn On
Output
a
conventional
TV connection
screen
Progressive
on a
and
Aspect
mode is set to "4:3".
entire
2)
on
this unit.
RGB: When your TV is connected with the SCART
(RGB signal) jack.
scan:
Connect component out of this unit to the input of your
monitor/television, set your television or monitor to
Component Input.
1. Select
"Progressive Scan"
on
the DISPLAY
menu
then press B.
DISPLAY
TV
Aspect
Display
Mode
Progressive
TV
Output
Scan
On
Off
Select
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
Note:
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive
Scan
on
the DVD
Player.
19
AUDIO
Each DVD disc has
a variety of audio output options.
options according to the type of
Set this unit AUDIO
audio system you
use.
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48KHz
DRC
On
Vocal
On
Move
Dolby Digital
Select
DVD
/ DTS / MPEG
DivX
Bitstream: Select "Bitstream" if you connect the
DVD Player's DIGITAL OUT jack to an amplifier or
other
equipment
with
a
Dolby Digital, DTS
or
MPEG decoder.
PCM
MPEG): Select when
digital stereo amplifier.
Dolby Digital or MPEG will be
(for Dolby Digital
connected to
a
DVDs encoded in
automatically
/
two-channel
downmixed to two-channel PCM
audio.
Off
not
(for DTS): If you select "Off", the DTS signal is
output through the DIGITAL OUT jack.
Sample Freq. (Frequency)
DVD
If your receiver or amplifier is NOT capable of han96 kHz signals, select 48 kHz. When this choice
dling
is made, this unit
to 48 kHz
signals
automatically
so
converts any 96 kHz
your system
can
decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of
any further processing.
signal through
Check the documentation for your
its capabilities.
Dynamic Range
Control
(DRC)
amplifier
DVD
without
to
verify
DivX
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic presen-
tation
possible,
thanks to
digital
audio
technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the
quietest ones).
This allows
you to listen to a movie at a lower volume without
losing clarity of sound. Set DRC to On for this effect.
Vocal
DVD
Set to On
playing.
only
when
normal stereo sound.
20
a
multi-channel karaoke DVD is
The karaoke channels
on
the disc mix into
OTHERS
DivX(R)
The PBC, Auto
Play
and
DivX(R) VOD settings
can
be
changed.
VOD
DivX
can display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
You
OTHERS
PBC
Auto
DivX(R)
On
DivX(R)
Your
Off
Play
VOD
Video On Demand
registration
code is
:
XXXXXXXX
Select
To learn
more
visit
www.divx.com/vod
(Done)
Move
Select
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent
The
PBC
Set
VCD
Playback Control (PBC)
On: Video CDs with PBC
are
played according
to the
are
played
the
same
way
as
Audio CDs.
Auto
Play
Display
Play
function is not active.
Play
function may not work for
of
can
watch the file.
VOD Rental
DivX(R)
This rental has 3 views left.
can set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will
search for title that has the longest playback time and
then play back the title automatically.
Play
the number which you
View
You
Off: Auto
options
viewing
DVD
function is active.
InstaliodSeup
file.
Notes:
?
On: Auto
move
If you rent the DivX VOD file, it has several
limits as shown below.
PBC.
Off: Video CDs with PBC
encrypt
an
to On or Off.
Do you want to
use one
of your 3 views now?
(Yes) (No)
?
The rental has been
expired.
Notes:
The Auto
some
DVDs.
Rental
Expired
(Done)
?
Display
the authorization
error.
Authorization Error
This
player is not authorized
to play this video.
(Done)
21
LOCK
Password
(Parental Control)
You
LOCK
Unlock
Rating
Password
Country
New
2. Follow
step
"New" is
Input
Move
that may not be suitable
of these discs contain
scenes
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
suitable
more
scenes as an
If you
control feature allows you to block
rating you input, there
to scenes below the
1.
2.
3.
your children from being able to view
material you believe is unsuitable.
"Rating"
on
the LOCK
menu
code you
Press SETUP to
Input
the
6-digit
display
the
can
Setup
clear it
using
menu.
number "210499" and the
Enter
a new
code
as
security
described above.
Code
DVD
country/area
whose standards
used to rate the DVD video disc, based
list in the reference chapter.
Rating,
Password and
Country Code
are
prompted
to do so.
Input 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
a
rating
a
from 1 to 8
using
1.
1-8:
tions and
Rating one (1)
rating eight (8) is
3.
Select the first character
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Notes:
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
is
the disc.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
selection, then
the LOCK
menu
the
then
as
shown left
(Rating).
using
v / V buttons.
Press ENTER and select the second character
using
v / V buttons.
Press ENTER to confirm your country code
selection.
the least restrictive.
on
Follow step 2
the v / V buttons.
same
"Country Code"
2.
4.
has the most restric-
Select
on
press B.
5.
22
Security Code
Enter the code of the
then
features, you must input the 4-digit security code
you created. If you have not yet entered a security
available
your
were
2. To access the
scenes
forget
Country
press B.
If you set
the same
then press ENTER.
by
preventing
Rating
4-digit code,
verify.
to
code is cleared.
parental
3. Select
new
again
If you forget your security code you
the following steps:
alternative.
1. Select
or
4. Press SETUP to exit the menu.
Some movies contain
access
(Rating). "Change"
Select
DVD
for children to view.
The
it
2 as shown left
highlighted.
3. Enter the
Rating
change password.
1. Select Password on the LOCK menu then press B.
IT
Code
(Security Code)
enter or
can
Operation
Playing
a
5.
tape
You will only be able to load and eject video cassettes when your VCR is plugged into the mains.
Your VCR may also playback recordings from
NTSC tapes (on PAL TV).
the desired function.
During
Make
If distortions
that you have correctly connected your
described earlier in this book.
Turn on your TV.
Press POWER to turn
your VCR.
Insert the video cassette into your VCR.
on
The video cassette should have the window side
facing
2.
up and the
arrow
Press PLAY to start
facing
away from you.
3.
automatically adjust
picture quality.
Press PAUSE/STEP to still
Press PAUSE/STEP
the
tracking
to
a
playback.
If the end of the tape is reached, your VCR will
stop playback automatically, rewind, stop, eject the
tape.
CM
Operation
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then
resume normal playback.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
press CM SKIP to
skip:
3 Press 90 seconds
4 Press 120 seconds
5 Press 150 seconds
6 Press 180 seconds
(Optimum
Picture
Response)
This feature
the
tape frame by frame.
If you press FORWARD, the picture will be slowed
down at about 1/19 times the normal
reduce
Press EJECT.
OPR
picture.
repeatedly to advance
picture,
-.
2 Press 60 seconds
AUTO TRACKING
the best
in the
seen
1 Press 30 seconds
If you load a
record protection tab removed, playback of the
cassette will start automatically.
Your VCR will
+ or
Press STOP to end
material).
Repeatedly
playing
your tape.
video cassette which has had its
give
6.
be
can
them with TRK
sure
as
slow motion and shuttle, the noise bars
on the picture according to the status
may appear
of tape.
-
VCR
G.
To switch off the slow motion and shuttle, press
Getting a better picture
When a cassette is inserted and playback started,
the automatic tracking function works to get the
best possible picture automatically. If the quality of
the recording is poor, repeatedly press TRK + or
on the remote control to manually adjust the
tracking until any distortions have been removed.
Press numbered 0 on the remote control to switch
automatic tracking back on again.
1.
playback, Shuttle :
During playing back or still picture press F or
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play,
2xplay, 7xplay)
Slow motion
playback
can be paused for up to 5 minutes. After 5
minutes your VCR will stop the tape to prevent
damaging the tape or your VCR
Tapes
automatically improves playback picture
quality by adjusting your VCR to the condition of the
tape.
1.
Press i.
2.
Press 1
3.
Press OK.
or
2 to select OPR.
.
Still
picture quality can
pressing TRK + or
be
improved slightly by
-.
4.
Press PLAY to continue
playing
your tape.
Picture search:
back press either FORWARD or
BACKWARD and this will enable you to rapidly
wind the tape (7 times normal playback) and see
During playing
where you
are on
the tape.
Logic search:
During fast forwarding
OFF
SOFT
SHARP
f
ON
OFF
4.
Press
3
or 4
16:9
4:3
MS
TIME
DATE
SYSTEM
Dr.
OPR
-
DECODER
i
OPR
repeatedly
to select:
OFF, SOFT
or
SHARP.
Please note you may
rewinding press and hold
FORWARD or BACKWARD the picture will be
played back at 7 times normal playback speed.
VCR
12
12
playing
or
5.
a
only
set OPR when
tape.
Press i return to
screen.
23
Instant Timer
5.
Recording (ITR)
Your VCR allows you to make
of simple methods:
recordings using
a
variety
Instant Timer
immediately
Recording (ITR) start recording
a set period of time or until the
for
video cassette
Your VCR
runs
which
will record up to 180 minutes using Standard Play
(SP); using LP you will be able to record up to 360
minutes. Please note there will be
quality
Long Play or
Play.
SP will produce improved picture and sound
quality, however LP will provide twice as much
recording time as SP.
Press REC/ITR to start
recording.
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
incorporates Long Play (LP)
and sound
6.
out.
enables you to record up to twice the amount of
time on a video cassette. For example an E-180
picture
Press LP if you wish to record in
Standard
when
slight
using LP.
a
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
7.
Press PAUSE/STEP to avoid
recording
unwanted
scenes.
Press PAUSE/STEP to continue
loss in
recording.
If you press PAUSE/STEP during ITR, this unit will
enter the record pause mode and ITR is cancelled.
paused for up to 5 minutes; RECP
displayed when a tape is paused. After 5
minutes your VCR will stop recording to prevent
damaging the tape or your VCR.
Tapes
can
be
will be
1.
Make
VCR
that you have correctly connected your
described earlier in this book.
sure
as
Press POWER to turn
2.
Insert
your VCR.
on
video cassette with
a
protection
8.
tab into
your VCR.
The video cassette should have the window side
facing
3.
up and the
arrow
facing
away from you.
Press PR + or to select the programme
number you wish to record.
-
You may also directly select programme number
using the numbered buttons on the remote
4.
EJECT will appear
recording
the
rear
the
rear
from EURO AV1 SCART socket
of your unit.
AV 2 for recording from EURO AV2 SCART socket
of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
on
(Left
&
Right)
sockets
on
the front of your unit.
screen
for
a
few
If you do not wish to record on a tape (this can
happen quite easily by accident!) remove the
protection tab on the back edge of the video
cassette.
If you wish to record directly from the SCART or
RCA sockets repeatedly press AV until the socket
on
the TV
Notes:
It is
AV 1 for
on
seconds.
record
displayed.
recording.
Press EJECT.
control.
you wish to record from is
24
Press STOP to end
possible to record on a video cassette
protection tab removed by covering
with self adhesive
with the
the hole
tape.
Remember you can record one programme while
another by starting your instant recording,
watching
press TV/VCR to appear TV indicator in the display
window and then selecting a different channel on
your TV.
You may also select the the start and end times
recording using On Screen
Display
Timer
pressing
PR
PR-01
You may set up to seven timer record events
within one month of the current date.
Note:
Before setting the timer make sure that you have
set the VCR clock correctly and you know which
stations you have tuned TV stations on your VCR.
1.
7.
Insert a video cassette with protection tab into
your VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
2.
Press i.
Press 1 or 2 to select REC.
Press OK.
3.
Press OK to start setting the timer record event.
If all timer record events are full press 3 or 4 to
select the event that you wish to remove and
(SP, IP,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
--
-~
-~
or
-~
::
--
-~
--
-~
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
DATE
TIME
16
1900
::
2000
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
-~
9.
Press STOP to end
SP
--
::
SP
--
DATE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
If at a later date you wish to delete or change any of the
settings in timer event memory you may do so without
having to enter all the timer event information again.
Simply display the timer event screen. Press 3 or 4 to
select the event that you wish to delete or change.
Press 1 to delete the event...or
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3
or 4 to enter the correct information.
SP
SP
SP
SP
SP
SP
SP
Press the numbered buttons to enter the date of
the programme.
If you press OK before entering the date you may
select one of the following automated recording
features. Press 1 or 2 to select, then press OK to
confirm.
DLY To record every day (except Saturday and
Sunday) at the same time.
SU~SATo record at the same time every week.
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
recording.
Notes:
TIME
--
SP
SP
SP
SP
SP
SP
SP
SUMOTUWETHFRSA
6.
-~
Check that the timer event details are correct.
Press i twice.
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your VCR Standby.
will appear in the display window while your
VCR waits to make the recording. To watch a DVD
during timer recording standby mode, press
POWER and DVD to switch to DVD mode.
SP
--
::
--
--
--
8.
SP
--
-
PR
--
::
LP).
PR-01
SP
--
::
--
SP
--
::
--
SP
--
::
Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1
9, press 0 first, then
the channel number; for example Stations 3 03.
You may also select Channels by pressing 3 or
4. Once selected press 2.
If you wish to record from AUDIO IN (L/R) and
VIDEO IN on the front or from the EURO SCART
sockets on the back of your unit, press AV to
select for correct display (AV1, AV2 or AV3).
PR-01
::
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program. IP mode is not
selected when VPS/PDC is ON.
-
5.
SP
~
--
--
TIME
--
--
PR
TIME
190020
::
--
Press 1 to delete the event.
4.
16
--
Press 3 or 4 to switch VPS/PDC on or off.
Press 2 to select the recording speed.
Press 3 or 4 to select the desired tape speed
replace.
DATE
DATE
--
PR
PR
by
3 or 4.
Press the numbered buttons to enter the recording
start and end times of the programme that you wish to
record.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme
will always be given priority.
Example:
Programme 1 is programmed to start at 16:00 and end at 17:00.
Programme 2 is programmed to start at 16:30 and end at 17:30.
(In this case, Programme 1 will be recorded in its entirety, but
only the last 30 minutes of Programme 2 will be recorded.)
Video
Programme System (VPS)
The Video Programme System (VPS) ensures that the TV programmes that you have programmed for timer recording will be
recorded exactly from their beginning to end, even if the actual
broadcasting time differs from the scheduled time due to
delayed start, or if the programme is extended beyond its
scheduled time. Also, if a programme is interrupted, for example,
if a news flash is inserted, the recording will also be interrupted
automatically and resumed when the programme continues.
The VPS signal is broadcast by the TV station and this controls
the timer in the video recorder.
VPS should be set ON for all timer recordings from TV stations
broadcasting these signals. It should be set OFF for all timer
recordings from TV stations that are not broadcasting these signals.
The similar system PDC, which is used in the time being in
the Netherlands, can also be used with your new video
recorder.
***
25
Playing
a
DVD
or
General Features
Video CD
Note:
Playback Setup
Turn
1.
on
the TV and select the video
connected to the DVD
Turn
input
source
player.
2.
the audio system (if applicable) and select
the input source connected to the DVD player.
3.
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the
on
playback
side down.
Press OPEN/CLOSE to close the tray. Playback
starts automatically. If playback does not start,
4.
press PLAY.
In
Unless stated otherwise, all
Moving
to another TITLE
When
the disc
menu
might
disc has
a
stopped
screen.
You
on
page
can
operating
21).
?
parental control is set and the disc is not within
rating settings you must input the password.
(See "Lock Menu" on page 22.)
?
To watch
a
The
region
code for this
player
is 2
disc has
than
one
chapter/track
than
more
track, you
one
chapter
can move
or a
to
follows:
as
Press SKIP .
or > briefly during playback
chapter/track or to return to the
the current chapter/track.
of
Press SKIP . twice
briefly
to
step back
DVD
during
timer
to
to the
to any chapter during DVD playback,
DISPLAY
and press v / V to select the
press
chapter/track icon. Then, input the chapter/track
To go
directly
numberoruseb/B.
Search
1.
Press m
or M
during playback.
2.
Press m
or M
repeatedly
to select the
required
speed.
DVD, DivX disc; X2, X4, X16
recording standby
mode, press POWER and DVD to switch to DVD
mode.
Video CD; X2, X4
3.
or
or
X100
X8
To exit SEARCH mode, press PLAY.
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(Stereo, Left, or Right).
different audio channel
26
its number while
previous chapter/track.
If
player.
(two).
on a
more
beginning
the
your
play any title by inputting
is stopped.
select the next
?
DVDs may have a region code. Your player does
not play discs that have a region code different from
a
another
Notes:
?
to
can move
playback is
appropriate number (0-9) or use
title
may differ. Follow the instructions on
the each menu screen. You also may set PBC to
?
then the
disc has
procedures
(See "PBC"
title, you
When
Use the number buttons to select the track you
Off
one
to another CHAPTER/TRACK
want to view and press RETURN to return to the
and
than
Moving
?
settings
more
appear
Use the b B v V buttons to select the title/chapter
you want to view, then press ENTER to start.
Press TITLE or DISC MENU to return to the menu
Menu
use
b / B to move to another title.
instead:
menu screen.
described
another title. Press DISPLAY while
playback
some cases,
operations
the remote control. Some features may also be
available on the Setup menu.
a
Still Picture and
Frame-by-Frame Playback
Repeat
You
1.
2.
Press PAUSE/STEP
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
on
?
?
?
The DVD
player
will
?
go into PAUSE mode.
?
?
2.
Use m
or
M to select the
required speed: t
(backward), or T
1/2 (forward).
1/16, t 1/8, t 1/4,
or
t 1/2
1/16, T 1/8, T 1/4,
or
T
Video CD, the Slow speed changes: T
1/16, T 1/8, T 1/4 or T 1/2 (forward).
With
a
To exit Slow Motion mode, press PLAY.
-
Repeat Chapter/Title/Off
chapter.
the current
Title: repeats the current title.
Off : does not play repeatedly.
Track
All
Repeat
Track/All/Off
repeats the current track
repeats all the tracks on a disc.
:
Off
-
:
does not
:
play repeatedly.
Notes:
?OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the repeat function (See "PBC" on
page 21).
?
3.
Chapter: repeats
Video CDs
(X) during playback.
now
title/chapter/all/track on a disc.
during playback to select a desired
DVD Video Discs
To exit still motion mode, press PLAY.
Press PAUSE/STEP
a
repeat mode.
Slow Motion
1.
play
can
Press REPEAT
If you press SKIP
(>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
Note:
Slow motion
playback
in
reverse
is not
with
possible
Video CDs and DivX Discs.
3D Surround
To
produce
a
3D surround effect that simulates
multi-channel audio from two stereo
speakers (instead
speakers normally required for multi-chanfrom a home theater system).
of the five+
Random
nel audio
1.
Press RANDOM
The unit
during playback or in stop mode.
automatically begins random playback
and RANDOM appears
2.
Press RANDOM
again
the TV
on
screen.
By pressing SKIP
Use 3
during random playback, the unit
(track) and resumes random playback.
menu
must set PBC to Off on the
to use the random function
(See "PBC"
on
1.
page
2.
1.
2.
3.
a
playing
at any chosen time on the disc:
Press DISPLAY
box shows the
A-B
To repeat
option.
highlighted.
Time Search
21).
Repeat
will be
Use1or2totoselect"3DSUR".
To start
PBC, You
option
To turn off the 3D Surround effect, select "Normal".
>
Video CD with
during playback.
to select the sound
or 4
The sound
Note:
setup
2.
3.
selects another title
a
Press DISPLAY
to normal.
Tip:
On
1.
during playback. The
elapsed playing time.
time search
Press v / V to select the time clock icon and
"-:--:--" appears.
3.
sequence.
Press A-B at your chosen
appears briefly on the TV
starting point.
Press A-B
end
screen
again at your chosen
briefly on the TV
repeat sequence begins.
again
the
required
start time in
"
A
*
"
point.
and the
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
screen.
"A B" appears
Press A-B
Input
seconds from left to
4.
right.
Press ENTER to confirm.
Playback
starts from the
selected time.
to cancel.
27
Zoom
Use
to
zoom
Press ZOOM
1.
the video
enlarge
image.
during playback
or
still
playback
to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
DVD Features
Checking
the contents of DVD discs: Menus
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DISC
MENU.
Input
the
B v V buttons to
Each press of the ZOOM button changes the TV
in the sequence: 100% size → 400% size
2.
Special
corresponding number or use the b
highlight your selection. Then press
ENTER.
screen
→
1600% size
→ screen
fit mode
→
100% size
Title Menu
Screen fit mode:
You
the
can
when
screen
1.
the way the
change
image appears on
you're playing a DVD movie.
Press 3/4 to select between Normal, Enhanced,
and Maximum.
3.
Use the bBvVbuttons to
zoomed
4.
To
move
through
picture.
resume
normal
playback,
?
press CLEAR button.
To enter
points.
point
the TV
screen
a
on
the disc. The Marker icon appears
to enter up to nine
on
markers.
or
1.
During
disc
Clear
search
menu
a
Marked Scene
Within 10 seconds, press b / B to select
number that you want to recall or clear.
3.
Press ENTER and
marked
scene.
playback
a
and
again
menu
is
displayed.
to exit.
recorded at different
scenes
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
Changing
press SEARCH. The marker
appears on the screen.
playback,
2.
angles,
as camera
options,
camera
briefly. Repeat
To Recall
subtitle
Angle
If the disc contains
from up to nine memorized
marker, press MARKER at the
playback
desired
the
Press TITLE to exit.
Camera
Marker
start
can
3.
Press DISC MENU
Marker Search
You
offers features such
menu
Press DISC MENU and the disc
disc, VR disc and movie file.
a
may appear.
a menu,
Otherwise, the disc
screen.
Disc Menu
Zoom may not work on some DVDs.
Screen fit mode is available for playing the DVD
To enter
menu
The
on
the
appears
spoken language and
chapters for the title.
the
Notes:
?
2.
Press TITLE. If the current title has
menu
marker
starts from the
Or, press CLEAR and the marker
the Audio
Press AUDIO
different audio
Language
repeatedly during playback
language or audio track.
to hear a
With DVD-RW discs recorded in VR mode that have
both
a
main and
Bilingual audio channel, you can
(L), Bilingual (R), or a mix of
Bilingual) by pressing AUDIO.
a
switch between Main
both
(Main
+
number is erased from the list.
4.
You
on
any marker by
the marker search menu.
can
play
inputting
its number
Subtitles
Press SUBTITLE
repeatedly during playback
languages.
to see
the different subtitle
Note:
?
The subtitle file of the DivX file is
displayed only
smi, srt and sub.
?
If there is
no
information
not read in the DivX
28
file,
or
"
1
there is
"
or
a
code that
etc. are
can
displayed.
Playing
Audio CD
an
or
MP3/WMA
MP3 / WMA disc
limited
Disc
?
player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
?
player
is
Sampling frequency: within 8 48 kHz (MP3),
48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
within 32
The DVD
with this
compatibility
follows:
as
-
-
-
?
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY or ENTER and playback starts.
?
?
AUDIO CD
1/12
0:52:07
List
Program
creates an ISO 9660 file
Track1
Track2
Track3
?
Track4
File
names
and must
Track5
Track6
Track7
?
Clear All
Track8
PROGRAM
They
should have
maximum of 8 letters
.mp3 or .wma extension.
contain special letters such as /
incorporate
should not
system.
a
an
?*:"<>letc.
Edit
?
The total number of files
on
the disc should be
Operation
less than 650.
MP3 / WMA
1.
Press v / V to select
folder, and press ENTER
a
to see the folder contents.
2.
Press v / V to select a track then press PLAY
ENTER. Playback starts.
or
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MUSIC
1/12
0:00:00
This DVD
these
List
require certain pre-existing conditions (see
above) to ensure compatible playback.
Program
1-Music1
2-Music2
Customers should note that
3-Music3
4-Music4
required
5-Music5
6-Music6
DISPLAY
PROGRAM
Info
Edit
should
Tip:
?
If you
is
and music from the Internet. Our company has
no right to grant such permission. Permission
Clear All
7-Music7
permission
in order to download MP3 / WMA files
always
be
sought
from the
copyright
owner.
are
in
a
file list
return to the Folder
on
list,
the MUSIC
menu
the v / V to
use
and want to
and
highlight
press ENTER.
?
?
?
Press DISC MENU to
move
to the next page.
On
a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word
on
When
a
playing
titles, you
top of the
file
can see
menu
containing
is
highlighted.
information such
the information
as
track
by pressing DISPLAY.
29
Audio CD and MP3 / WMA Disc
Random
Features
1.
Pause
1.
Press PAUSE/STEP
2.
To return to
press
Moving
ENTER
or
(.
2.
until RANDOM
menu screen.
Tip:
>) briefly during playback
track or to return to the beginning
or
By pressing SKIP
>
Press SKIP . twice
previous
3.
In
case
Repeat
You
1.
can
to go back to the
track.
Repeat
1.
of audio CD, to go
enter the track number
buttons
briefly
directly to any track,
using the numbered
(0-9).
a
2.
track/all
on a
Press REPEAT when
disc.
playing
?
?
on
the
menu screen.
Press A-B
again at your chosen end point.
Repeat icon and "A-B" appear on the menu
screen, and the sequence begins to play
repeatedly.
3.
a
disc. The repeat
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the
Press REPEAT to select
?
To repeat a sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
The
icon appears.
2.
A-B
and "A" appear
Track/All/Off
play
during random playback, the unit
resumes random playback.
selects another track and
to go to the next
of the current track.
2.
playback, press RANDOM
disappears from the
To return to normal
repeatedly
to another Track
Press SKIP
1.
screen.
during playback.
playback, press PLAY,
PAUSE/STEP again.
Press RANDOM during playback or when
playback is stopped. Random Playback begins
immediately and RANDOM appears on the menu
a
desired repeat mode.
3D Surround
Track: repeats the current track
All: repeats all the tracks on a disc.
Off(No display):
does not
menu screen.
To
play repeatedly.
produce
a
3D surround effect that simulates
multi-channel audio from two stereo
speakers (instead
speakers normally required for
multi-channel audio from a home theater system).
of the five+
Note:
If you press SKIP (>) once
the repeat playback cancels.
during Repeat Track playback,
2.
Search
1.
2.
30
Press AUDIO
Press m
or M
during playback.
Press m
or M
repeatedly
to select the
X8 backward
or
forward.
on
To return to normal
playback, press AUDIO
disappears from
To exit SEARCH mode, press PLAY.
the
until "3D SUR."
menu screen.
required
during playback.
"3D SUR." appears
repeatedly
speed: X2, X4,
3.
1.
menu screen.
the
Repeat Programmed
Programmed Playback
1.
1.
Insert
a
2.
contain 30 tracks.
can
Press REPEAT when
Press REPEAT to select
?
disc.
?
?
Audio CD
2.
MUSIC
or
menu
a
desired repeat mode.
Track: repeats the current track
repeats all the tracks on programmed list.
All:
Off(No display):
does not
If you press SKIP (>) once
the repeat playback cancels.
mark will appear to the right of the word
on the right side of the menu screen.
E
disc. The repeat
play repeatedly.
Note:
appears.
Press PROGRAM.
The
a
MP3/WMA Discs:
or
AUDIO CD
playing
icon appears.
The program function enables you to store your
favorite tracks from any disc in the player memory.
A program
Tracks
during Repeat Track playback,
"Program"
Erasing
Note:
Press PROGRAM
disappear
again, then
Program
to exit the
the
2.
List
List
E
Program
E
Program
Track1
Track5
Track2
Track7
1-Music1
4-Music4
Track3
Track4
2-Music2
6-Music6
Track4
Track1
3-Music3
1-Music1
3.
2-Music2
Track5
Press B to
move
to the
"Program"
list.
Use v/V to select the track that you wish to
"Program" list.
Operation
erase
from the
5-Music5
4.
6-Music6
Track7
Clear All
Track8
Clear All
7-Music7
Press CLEAR.
on
PROGRAM Edit
DISPLAY
Audio CD Menu
Erasing
MP3/WMA Menu
1.
The program
PROGRAM to exit the
stopped.
playback
is
the
to erase additional tracks
Complete Program
Follow steps 1-2 of
List" as above.
"Erasing
a
List
Track from
Program
appears. Press
menu
2.
menu.
Use 3/4 to select "Clear All", then press ENTER.
The
Note:
Video CD with PBC, you must set PBC to Off
the setup menu to use the
(See "PBC" on page 21).
Repeat
the list.
PROGRAM Edit
Info
Video CD: Press PROGRAM while
a
Press PROGRAM in the stop mode to
Edit mode.
Program
4-Music4
Track6
On
:
List
Program
1/12
0:00:00
1/12
Track from
Video CD
enter
MUSIC
AUDIO CD
0:52:07
1.
mark will
E
Edit mode.
a
on
programmed playback
complete Program for the disc
will be erased.
Note:
The programs
removed.
are
also cleared when the disc is
VIDEO CD
List
E
Program
Track1
Track5
Track2
Track2
Track3
Track3
Track4
Track1
Track5
Clear All
Video CD Menu
3.
Select
a
track
on
the "List", then press ENTER to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
4.
Press B.
Select the track you want to start
"Program" list.
5.
Press PLAY
or
ENTER to start.
playing
on
the
Playback begins
in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
list have
"Program"
6.
To
resume
playback,
normal
select
a
played
once.
playback
from
track of CD
programmed
(or MP3/WMA) list
and then press PLAY.
31
Viewing
JPEG Disc
a
Moving
Using this DVD Player you can view Kodak PICTURE
CDs and discs with JPEG files.
1.
Insert
a
appears
disc and close the tray. The PHOTO
on the TV screen.
menu
PHOTO
Preview
List
JPEG Folder 1
JPEG
to another File
Press SKIP
(. or >) or cursor (b or B) once
viewing a picture to advance to the next or
previous file.
while
Zoom
JPEG
Use
zoom
(see
28
to enlarge
page)
the
photo image.
JPEG Folder 2
>>>
JPEG Folder 3
To rotate
JPEG Folder 4
JPEG Folder 5
picture
JPEG Folder 6
Press
JPEG Folder 7
v / V
during showing
JPEG Folder 8
picture
clockwise
or
a
To listen to MP3/WMA music
2.
Press v / V to select
a
folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
use the v / V buttons on the remote to
and press ENTER.
highlight
3.
Viewing the file proceeding starts.
While viewing a file, you can press STOP
to the previous menu (PHOTO menu).
Press DISC MENU to
Slide Show
move
PLAY.
>
containing
the two types of file in
display PHOTO
Press TITLE to
Press v / V to select
4.
Use B / V to select
a
starts. The
STOP is
photo
menu.
file.
icon then press ENTER.
will continue until
playback
pressed.
the
(Slide Show)
then
To listen to
only the desired music watching picture,
programmed the desired tracks from the "MUSIC"
menu and then proceed as above.
Speed options
(Slow).
: >>>
(Fast),
>>
limited
as
compatibility
with this
is
player
follows:
upon the size and number of JPEG
a long time for the DVD player
Depending
files, it could take
PHOTO word
to read the disc's contents. If you don't see an
on
top of the
menu
is
highlighted.
Press RETURN, information of file is hidden.
player
will
now
slide show.
?
go into PAUSE mode.
To return to the slide show, press PLAY
PAUSE/STEP again.
after several minutes,
some
of
---
2048
during
display
the files may be too large
reduce the resolution
of the JPEG files to less than 2M pixels as 2760 x
JPEG
Press PAUSE/STEP
The
or
pixels
and burn another disc.
The total number of files and folders
on
the disc
should be less than 650.
press
?
Some discs may be incompatible due to a
recording format or the condition of disc.
different
?
Ensure that all the selected files have the
extensions when
?
If the files have
rename
?
File
them
names
the files
are
Windows
copying
into the CD
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
as
without
able to be read
32
to MP3/WMA
disc.
On a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
Still Picture
2.
same
player.
on-screen
1.
listening
the
3.
?
?
on
Tip:
highlight
three Slide
(Normal) and
?
Insert the disc
JPEG disc
are
files while
2.
to the next page.
Tip:
There
display
Playback
press ENTER.
?
can
music files recorded
to move
JPEG
Use vVbBto
You
the
or
watching picture
JPEG
1.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
to rotate the
picture
counter clockwise.
by
shown
Explorer.
".jpg"
extension will not be
this DVD
as
JPEG
player.
image
Even
though
files in
DVD VR format Disc
Playing
a
This unit will
play
DVD-R/RW discs recorded
Maintenance and Service
using
using
the DVD-Video format that have been finalized
a
?
This unit will
play DVD-RW discs recorded using
Recording (VR) format.
a
appears
When
shipping
save
?
?
Press TITLE to
move
or
to the list menu.
Do not
use
near
carton and
packing
volatile
liquids
such
as
insecticide
the unit.
or plastic products in contact
long period of time. since they
Do not leave rubber
with the unit for
a
leave marks
the surface.
Cleaning
on
the unit
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
To clean the
Note:
Unfinalized DVD-R/RW discs cannot be
played
in this
surfaces
are
moistened
player.
?
original shipping
the exterior surfaces clean
spray
Press v / V to select a track then press PLAY
ENTER and playback starts.
the
the unit
factory.
Keeping
?
before
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the
3.
chapter
service technician.
the Unit
Handling
Please
disc and close the tray. The DVD-VR
on the TV screen.
Insert
menu
DVD-VR
2.
a
DVD-recorder.
the Video
1.
Refer to the information in this
contacting
Some DVD-VR disc
are
made with CPRM data
by
DVD
RECORDER. Player does not support these kinds of
discs.
Do not
or
strong solvents such
use
thinner,
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
What is 'CPRM'?
CPRM is
a copy protection system (with scramble system)
only allowing the recording of 'copy once' broadcast
programs. CPRM stands for Content Protection for
Recordable Media.
player is CPRM compatible, which means that you
record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
This
can
can
only be made
on
DVD-RW discs formatted in VR
mode, and CPRM recordings
players
that
are
only be played on
specifically compatible with CPRM.
can
Maintaining
the Unit
The DVD
player is a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
If the
or
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For details,
please
use.
contact your nearest authorized
service center.
33
Playing
a
DivX Movie Disc
DivX disc
Using
this DVD
Player
you
can
play
with this
player
is limited
DivX disc.
?
disc and close the tray. The MOVIE
appears on the TV screen.
Insert
1.
compatibility
follows:
as
a
menu
Available resolution size of the DivX file is under
720x576
?
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
56 characters.
MOVIE
0:00:00
List
?
Movie Folder 1
If there is
impossible
code to express in the DivX
as
mark on the
"
file, it may be displayed
Movie Folder 2
Movie Folder 3
"
_
display.
Movie Folder 4
Movie Folder 5
Movie Folder 6
Movie Folder 7
?
Movie Folder 8
If the number of the
screen
frame is
over
30
per 1 second, this unit may not operate
normally.
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
2.
v / V buttons on the remote to
If you want to view a particular file, press
v / V to highlight a file and press ENTER
PLAY.
or
audio is
If the file is recorded with GMC, the unit
supports only 1-point of the record level.
*
or
interleaved, either video
outputted.
?
GMC?
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4 encoders, like DivX or Xvid, have this option.
are different levels of GMC encoding, usually
Press STOP to exit.
4.
If the video and audio structure of recorded
file is not
and
highlight
press ENTER.
3.
?
There
called
Tip:
?Press DISC MENU to
?
On
move
is
a
MUSIC, PHOTO and MOVIE word
highlighted.
or
3-point GMC.
to the next page.
CD with MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and
1-point, 2-point,
on
top of the
menu
Playable
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 8 48 kHz (MP3),
?
-
within 32
?
Bit
32
34
48kHz
(WMA)
rate: within 8 320kbps (MP3),
192kbps (WMA)
-
-
-
Additional Features-VCR part
On Screen
You may
Video Doctor
Display
easily display
the current time
or
tape
counter, amount of tape left, day, month, year, day of
programme channel, tape speed and operational mode of your VCR will appear on the TV
screen. If a recording is taking place these On Screen
week,
Displays
will not be recorded onto the
(Self-Diagnosis)
This feature informs you that there is a problem with
error messages will appear on the
your VCR. These
TV screen.
1.
Press i.
Press 1
tape.
or 2
to select Dr.
Press OK.
Press CLK/CNT to
1.
Press CLK/CNT
display.
repeatedly
to
cycle through
the
display options. The tape counter and amount of
tape left will appear if there is a tape loaded.
2.
REC
majority of the On Screen
leaving only the clock or tape
After 3 seconds the
Displays
will clear
counter and the amount of
Press CLK/CNT
the TV
again
tape left
to remove all
on
the
Pr-12
PSET
R
ACMS
TIME
DATE
16:9
4:3
DECODER
OPR
SYSTEM
fOSD
ON
OFF
screen.
displays
from
VIDEO DOCTOR
HEAD STATUS
screen.
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
Tape Counter Memory Stop
Digital Tape Counter
display window instead of
The
OK
displayed on the
by pressing
CLK/CNT on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
on
can
be
the time
2.
Press
3 or 4
to check a
problem.
HEAD STATUS
O
PLEASE CLEAN:
Clean your video heads.
the tape.
TAPE STATUS
1.
Press CLK/CNT.
O
Press CLEAR to set the counter to 0:00:00.
Press PLAY
or
The tape counter
in hours, minutes and seconds.
2.
Insert
start
recording.
will display the
Press STOP when
playback
or
actual
play
recording
a
tape with its protection tab in place
NO. OF TIMER PROGRAMME
time
O
is
2Shows
the number of timer
recording.
NEXT TIMER PROGRAMME
complete.
O
Press BACKWARD.
PR-01 26 10:00~11:00SP
Shows the current status of timer
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
Lock
NOT RECORDABLE:
3.
recording.
Press i.
(Child Lock)
The control buttons on the front of the unit can be
switched off so that your unit can only be operated
using the remote control.
1.
Press LOCK.
and SAFE will appear in the display window.
None of the buttons on the front of your unit will
work.
If any buttons
on
the front of your unit
SAFE will flicker in the
display
are
window for
pressed
a
few
seconds.
2.
Press LOCK
will
again to switch off the child
disappear in the display window.
lock.
35
Hi-Fi Stereo Sound
2.
System
or
programmes
as
programmes
as
will be recorded
the
on
mono
Press AUDIO
repeatedly
mode appears.
3.
The choice is STEREO, LEFT, RIGHT and
MONO. In BIL playback the primary language is
output onthe left channel and the secondary
channel is output simultaneously from the right
channel when audio output is set to STEREO.
The primary language willbe output from both
channels when the audio setting is MONO.
3.
Your VCR can record and play back wide screen
aspect ratio programmes (16:9). To record a wide
screen format programme successfully the correct
type of wide screen signal must be broadcast by the
TV station.
1.
Switch on your VCR.
Press i.
Press F or G to select 16:9/4:3.
Press OK.
ON
OFF
PSET
R
36
Pr-12
ACMS
+
16:9
4:3
TIME
DATE
-
DECODER
OPR
SYSTEM
Dr.
VCR
12
VCR
12
REC
fOSD
REC
16:9
4:3
fOSD
OKi
ON
OFF
PSET
R
Pr-12
ACMS
+
16:9
4:3
-
DECODER
AUTO
4:3
16:9
Dr.
16:9
4:3
i
Press i to
Pr-12
+
16:9
4:3
remove
AUTO
ACMS
Dr.
16:9
4:3
4:3
16:9
-
DECODER
the
menus
i
from the TV
screen.
enjoy Wide-Screen playback you must
connect your VCR to the TV using a SCART
cable.
To set the decoder
We have already described, how to connect a
decoder for pay-TV station as CANAL+ or PREMIERE
on page 10. For the recording of an encoded station
you do not have to control anything. You just select
the station and wait shortly until the decoding will
start.
1.
Press i.
The main menu will appear on the TV screen.
Press F or G to select the DECODER.
Press OK.
2.
Press D or E to select.
ON: When the decoder is connected to the AV2
16:9
Compatibility
PSET
R
To
Please note that when adjusting the tracking
control Hi-Fi stereo sound may revert to MONO.
Wide Screen
VCR
12
REC
track of the video
until the desired audio
Normal format
playing back and recording Wide-Screen
recordings (16:9).
ON
OFF
MONO
The sound is recorded on the Hi-Fi tracks and the
mono track of the video tape without any separation.
recording
for
format
fOSD
on the Hi-Fi
channel (left)
and
16:9:
Only
tape.
2.
4:3 or
back Wide-Screen
Wide-Screen and Normal
normal.
Only for playing back
recordings (4:3).
BIL
primary language
AUTO,
4:3
tape.
Both audio channels will be recorded
to select:
Automatically plays
The particular type of sound received or that
recorded will be briefly displayed on the TV screen
for a
couple of seconds:
STEREO
Sound is automatically recorded on the Hi-Fi
stereo tracks. The
repeatedly
AUTO:
Your VCR's NICAM digital sound decoder allows
you to enjoy broadcasts with NICAM sound, as
well as standard stereo, bilingual and mono sound.
stereo and mono tracks of the video
E
16:9.
This allows you to record and playback the sound in
several different ways. Video cassettes recorded on
your VCR will have a normal mono audio track and
two VHS Hi-Fi stereo audio tracks. These stereo
tracks allow you to make audio recordings in Hi-Fi
stereo or bilingual mode from a TV broadcast, stereo
audio system, video disc or another Hi-Fi VCR.
1.
Press D
socket.
OFF: When another VCR is connected to the AV2
socket.
3.
Press i to return to
a
TV
picture.
Controlling
Additional Features
Last Scene
This
player
memorizes last
scene
from the last disc
can
You
can
other TVs with the remote control
control the sound level, input source, and
power switch of your LG TV with the supplied remote
control.
Memory
You
control the sound level,
input
source, and
that is viewed. The last
power switch of non-LG TVs as well. If your TV
is listed in the table below, set the appropriate
even
manufacturer code.
scene remains in memory
if you remove the disc from the player or switch
off the player. If you load a disc that has the scene
memorized, the
scene
is
automatically
recalled.
1.
Note:
holding down TV POWER button, press the
number buttons to select the manufacturer code
While
for your TV
(see
the table
below).
player does not memorize the scene of a disc if you
switch off the player before commencing to play the disc.
2.
Screen Saver
Code numbers of controllable TVs
This
The
appears when you leave the DVD
mode for about five minutes.
screen saver
player
in
Stop
Video Mode
Setting
With certain discs, the
flickering
That
or
means
playback picture may be
on straight lines.
interpolation or De-interlace is
If
Release TV POWER button.
more
them
than
one
code number is listed, try
entering
at a time until you find the one that works
with your TV.
one
Manufacturer
Code Number
LG / GoldStar
1
Zenith
1,3,4
(Default),
Samsung
6,7
Dot Crawl is shown
Sony
8,9
Vertical
Hitachi
4
2
not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
Note:
?
video mode.
To
change
your TV, some or all buttons may not
the TV, even after entering the correct
manufacturer code.
Depending
function
the video mode, press and hold
during disc playback.
on
on
DISPLAY about 3 seconds
The
?
video mode number selected is
displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
new
Video mode sequence:
MODE1 → MODE2 → MODE3
→
If you enter
a new
previously entered
?
code number, the code number
will be erased.
When you replace the batteries of the remote, the code
number you have set may be reset to the default setting.
Set the appropriate code number again.
MODE1
If you turn off the power, the video mode will return
to initial default state
Detailed
MODE1
al
or
:
MODE2
:
Description
The
video
(MODE1).
of each Video Mode
material of the DVD video
(film materimaterial) is determined from disc information.
source
Suitable for playing film based content or video
by the progressive scan method.
based material recorded
MODE3 : Suitable for playing video based
comparatively little motion.
content with
Note:
The video mode
setting only works when
Progressive Scan mode is set to "On" on
the
the setup
menu.
37
Copying
from DVD To VCR
Recording from
This unit allows you to copy the contents of a DVD to
a VHS tape with a press of the COPY button.
Notes:
Be
sure
setup
to set
"Progressive Scan"
to "Off" on the
recorder
With this video recorder you can make recordings
from an external source, such as copying from
another video recorder
protected,
are
attempting
In the
following description, this video recorder will be
recording and will be referred to as VCR
The other appliance will be used for playback and
B.
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
will be referred to
Insert VHS
Tape
blank VHS
Insert
a
Copy
the DVD to VHS
videotape
into the VCR deck.
Tape
Press the COPY button on the unit front
press the REC/ITR button.
panel
or
The DVD will go into Play mode and the VCR
will go into Record mode.
If the DVD disc menu appears, you may need
to press the Play button manually to begin
2.
3.
the Copy Process
When the DVD is finished
end the copy.
sure
Insert the recorded tape into VCR A and
a
blank
Press AV until the socket you wish to record from
is displayed. (VCR B)
recording from EURO AV1 SCART socket
the rear of your unit.
AV 2 for recording from EURO AV2 SCART socket
on the rear of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
(Left & Right) sockets on the front of your unit.
this unit in
Stop
playing,
over
and
over
4.
To start recording, press the REC/ITR
and PLAY on VCR A.
5.
When you want to finish
on both video recorders.
press STOP to
You must stop the Copy process manually
when the DVD movie ends, or the unit may
38
VCR A should be connected to the SCART socket
on the rear panel of your unit or the AV sockets on
the front panel of your unit.
on
If you press the REC/ITR button, be
DVD mode.
and record
VCR A.
AV 1 for
Note:
replay
as
tape into VCR B.
copying.
4.
used for
Insert Disc
1.
3.
camcorder.
Note:
to copy is copy
you may not be able to copy the disc.
one
2.
or a
menu.
If the DVD you
1.
another video
again.
copying,
on
VCR B
press the STOP
Reference
Language Codes
Use this list to
input your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
following
initial
settings:
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Country
Choose
a
8373
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Country
Malaysia
Code
ET
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Country
Code
AR
Country
Ethiopia
Fiji
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
AF
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
UG
Croatia
HR
Jamaica
JM
Ukraine
UA
CZ
JP
PH
United States
US
DK
Japan
Kenya
Paraguay
Philippines
PY
Czech Republic
Denmark
KE
Poland
PL
Uruguay
UY
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
TR
39
Troubleshooting
Check the
following guide
for the
possible
cause
or
VCR do not
a
problem
before
contacting
service.
Cause
Symptom
DVD
work
of
DVD
or
Correction
VCR button is not switched
Refer to page 2.
properly.
properly.
No power.
The power cord is disconnected.
Plug the power
let securely.
The power is on, but
the DVD player does
not work.
No disc is inserted.
Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
No
The TV is not set to receive DVD
Select the appropriate video input
mode on the TV so the picture from
the DVD player appears on the TV
picture.
signal output.
cord into the wall out-
screen.
No sound.
The video cable is not connected
Connect the video cable into the
securely.
securely.
The Progressive Scan is set to "On"
on the setup menu but is connected
to a standard (analog) television.
Set
The equipment connected with the
audio cable is not set to receive DVD
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
signal output.
The audio cables
are
not connected
is poor.
The DVD
not start
does
player
playback.
jacks
Turn on the equipment connected
with the audio cable.
Digital Audio Output
position.
is set to the
An
unplayable
properly.
disc is inserted.
placed upside
placed
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
The disc is dirty.
The TV channels are not tuned in
The disc is not
down.
within the
guide.
Clean the disc.
Check tuning, carry out
tuning again.
Insert a playable disc. (Check the disc
type and Regional code.)
Place the disc with the
down.
playback
Place the disc on the disc tray
rectly inside the guide.
The disc is
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
the rating level.
Rating
There is an obstacle in the path of the
remote control and this unit.
Remove the obstacle.
The batteries in the remote control
are exhausted.
Replace
Video tape cannot be
inserted.
Is the cassette compartment
Eject
No Hi-Fi sound
Audio mode is not set
empty?
properly.
Video Head Cleaning
Whenever a video cassette is inserted into or ejected from
This should mean that additional head cleaning should not
However dirt accumulating on the head after a long period
blurred or broken up. High quality video cassette tapes will
old or damaged tapes might.
40
Connect the audio cable into the
The power of the equipment connected with the audio cable is turned off.
The disc is
The remote control
does not work properly.
to "Off"
securely.
The
picture
Progressive Scan
page 19).
securely.
wrong
The
(see
jacks
the batteries with
or
side
cor-
change
new ones.
the tape in.
Select "STEREO" by repeatedly pressing "AUDIO" on the remote control.
your VCR the video head is automatically cleaned.
be necessary.
of time can cause the playback picture to become
not normally deposit dirt onto the video head, but
Specification
General
Power
requirements
Power
consumption
Dimensions
Mass
AC 200-240V, 50 Hz
19W
430 X 78.5 X 270
(approx.)
4.2
(approx.)
mm
(w/h/d)
kg
Operating temperature
Operating humidity
5˚C to 35˚C
Timer
24 hours
RF Modulator
UHF 22
(41˚F
to
95˚F)
5%to90%
display tape
68
-
(Adjustable)
System
Laser
Semiconductor laser,
Video Head system
Double azimuth 4 heads, helical
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
wavelength
650
nm
scanning.
CD:8Hzto20kHz
ratio
Signal-to-noise
(ANALOG OUT
More than 100dB
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
connectors
only)
(DVD)
(CD)
Inputs (VCR)
Audio
Video
-6.0dBm,
-6.0dBm,
more
than 10 kohms
more
than 47 kohms
1.0
75 ohms, unbalanced
(SCART/RCA)
1 Vp-p 75 ohms, sync negative
(Y) 1.0 Vp-p 75 ohms, negative
(C) 0.3 Vp-p 75 ohms
sync., Mini Din
Vp-p,
(SCART)
(RCA)
Outputs (DVD)
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
(Progressive Scan)
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
RGB output
0.7
4-pin
x
x
1
1
75 ohms
Vp-p,
Audio output
(digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio output
(optical audio)
3 V
Audio output
(analog audio)
2.0 Vrms
(p-p),
75
Ω, Optical
(1 KHz,
0
dB),
connector
600
x
1
Ω, RCA jack (L, R)x2/SCART (TO TV)
Outputs (VCR)
Audio
-6.0dBm, less than 1 kohms (SCART)
Video
1.0Vp-p,
RGB output
0.7
Design
and
specifications
are
Manufactured under license from
subject
to
75 ohms, unbalanced
Vp-p,
change
without notice.
Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol
Laboratories.
"DTS" and "DTS Digital Out"
are
(SCART)
75 ohms
trademarks of
Digital Theater Systems,
Inc.
are
trademarks of
Dolby
P/NO
:
3834RV0025M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement