LG | LPC-D1000A | LG LPC-D1000A Owner’s Manual

LPC-D1000_Eng
DVD RADIO CASSETTE
OWNER'S MANUAL
MODEL: LPC-D1000A/X/S
VIDEO CD
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Designs
without
and
specifications are subject
notice for improvement.
to
change
CAUTION
Use of controls
CAUTION
procedures
RISK OF ELECTRIC SHOCK
adjustments or performance of
than those specified herein may
or
other
result in hazardous radiation exposure.
DO NOT OPEN
Laser
CAUTION:TO REDUCE THE RISK OF
component in this product is capable of emitting
radiation not
ELECTRIC SHOCK DO NOT REMOVE
COVER(OR BACK)
the limit for Class 1.
exceeding
NO USER SERVICEABLE
PA RTS INSIDE. REFER SERVICING TO
CAUTION:INVISIBLE LASER RADIATION
QUALIFIED SERVICE PERSONNEL.
WHEN OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM.
LASERSTRALNING
AR OPPNAD STRALEN AR
VARNING:OSYNLIG
Explanation Graphical Symbols:
DENNA DEL
lightning flash with arrowhead
symbol, within an equilateral triangle
FARLIG.
The
intended to alert the
of uninsulated
is
Attention:Quand
to the presence
user
dangerous voltage
the
product's enclosure that may
sufficient magnitude to constitute a
NAR
s'exposer
within
aux
l'appareil
est
ouvert,
ne
pas
radiations invisibles du faisceau
laser.
be of
risk of
electric shock to persons.
This label is located
on
the interior.
The exclamation
point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and maintenance(servicing)
instructions in the literature accompanying
the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OF ELECTRIC
This
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
1
RAIN OR MOISTURE.
The CLASS 1 LASER PRODUCT label is located
To avoid electrical
shock, do
Refer
qualified personnel only.
The
servicing
to
apparatus should
not open the
cabinet,
not be
exposed to dripping
or splashing objects filled with liquids, such as
vases, should not be placed on the apparatus.
Do not install this
such
2
a
bookcase
equipment
or
in
similar unit.
a
confined space
Compact Disc player
LASER product.
is classified
as a
CLASS
on
the exterior.
This
product
is manufactured to
with the radio interference
EEC DIRECTIVE
and 73/23/EEC.
comply
requirements
of
89/336/EEC, 93/68/EEC
Contents
Introduction.....................4-9
SymbolusedinthisManual...............4
AbouttheSymbolDisplay.............4
NotesonDiscs.........................4
HandlingDiscs...........................4
StoringDiscs............................4
CleaningDiscs...........................4
NotesonTapes.........................4
TypesofPlayableDiscs...................5
Regionalcode.........................5
Disc-relatedterms......................6
FrontPanel............................7
RearPanel............................7
RemoteControl.........................8
DisplayWindow.........................9
Operation.....................16-27
AutoFunctionSelection..................16
SettingtheClock.......................16
UsingtheSleepFunction.................16
.16
UsingMicrophone(OPTIONAL).
.
.
.
.
.
.
.
.
.
.
Timer................................17
.18
PresettingtheRadioStations.
ListeningtotheRadio...................18
TapePlayback.........................19
TapeRecording........................19
PlayingaDVDandVideoCD............20
.
.
.
.
.
.
.
.
.
.
.
.
PlaybackSetup........................20
GeneralFeatures......................20
MovingtoanotherTITLE..................20
.20
Moving to another CHAPTER/TRACK
.
.
.
.
.
.
.
.
Search................................20
InstallationandSetup.
.
.
.
.
.
.
.
.
.
.9-15
.
Pause.................................20
TheACPowerCordConnection.................9
Still Picture and
BatteryInstallation............................9
SlowMotion............................21
TVConnections.......................10
AntennaConnection....................10
RepeatA-B.............................21
Repeat................................21
SoundAdjustment......................11
TimeSearch............................21
Mini
Frame-by-frame playback
.
.
.
.
.
.21
for Audio Stream & Surround mode 11
CameraAngle...........................21
BYPASS...............................11
Zoom...............................22
SoundQualityAdjustment..................11
XDSS (Extreme Dynamic Sound System)
.11
MarkerSearch........................22
Glossary
.
.
.
.
.
SpecialDVDFeatures..................22
SURROUND............................11
Checking
VolumeAdjustment.......................11
TitleMenu..............................22
MUTE.................................11
DiscMenu..............................22
HeadphoneSocket.......................11
.11
MicrophoneSocket(OPTIONAL).
AdjustingTapespeed.....................11
ChangingtheAudioLanguage..............22
ChangingtheAudioChannel................22
.
.
.
.
.
.
.
.
.
.
.
On-ScreenDisplay.....................12
PlaybackStatus/Restrictions...............12
the contents of DVD discs: Menus
.
.
.22
Subtitles..............................22
Playing an Audio CD or MP3/WMA
NotesonMP3/WMARecordings
.
Disc
.
.
.
.
.
.
.
.
.
.
.
.
.
.23
.23
InitialSettings.........................13
Pause.................................24
GeneralOperation.......................13
Language..............................13
?DiscLanguage........................13
?MenuLanguage.......................13
MovingtoanotherTrack...................24
RepeatTrack/All/Off......................24
Picture................................13
?TVAspect..........................13
Search...............................24
RepeatA-B............................24
ChangingtheAudioChannel................24
ViewingaJPEGDisc...................25
Others.................................14
MovingtoanotherFile.....................25
.14
StillPicture.............................25
?DynamicRangeControl(DRC)
.
.
.
.
.
.
.
.
.
.
?Vocal...............................14
?PBC................................14
?AutoPlay............................14
ParentalControl.........................15
?Rating..............................15
?CountryCode.........................15
Toflipthepicture.........................25
Torotatepicture.........................25
NotesonJPEGRecordings.................25
Programmed Playback
with Audio CD
andMP3/WMADisc.....................26
.26
Programmed Playback with Video CD
.
.
.
.
.
.
RepeatProgrammedTracks..............27
.27
ErasingaTrackfromProgramList.
.27
Erasing the Complete Program List
LastConditionMemory..................27
SystemSelect.........................27
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Reference....................28-30
LanguageCodes.......................28
CountryCodes........................28
Troubleshooting.......................29
Specifications.........................30
3
Introduction
To
proper use of this product, please read this
owner's manual carefully and retain for future
Notes
reference.
Handling
ensure
This manual
provides
information
on
the
operation
the unit require
and maintenance of your unit. Should
service, contact an authorized service location.
Symbol
Discs
on
Discs
Do not touch the
the
disc
on
by
playback side of the disc. Hold
edges so that fingerprints do not get
the
the surface. Never stick paper
or
tape
on
the disc.
Used in this Manual
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
After
of electric shock.
the disc to direct
Storing
playing,
leave it in
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
likely
to
cause
other material
or
harm to the
damage.
Discs
a
Cleaning
store the disc in its
Do not expose
of heat and never
case.
sunlight or sources
parked car exposed to direct sunlight.
Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Note:
Indicates
?
notes and
special
features.
operating
Tip:
Indicates
?
tips
and hints for
making
the task easier.
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
A section whose title has
is
applicable only
symbol.
to the disc
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
About the
"
"
Notes
Tapes
on
Preventing
CD
records.
of the
following symbols
represented by the
one
vinyl
record
Removing the tab(s) of the cassette (with a small
screwdriver) will prevent accidental erasure.
Side A
Tab for side A
Tab for side B
Symbol Display
may appear
your TV display during
operation and indicates that the function explained in
on
this owner's manual is not available
on
that
To record
again,
adhesive
tape.
cover
the hole of the tab with
specific
DVD video disc.
Adhesive
4
tape.
Types
of
Playable
Discs
DVD
(8cm/12cmdisc)
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In
addition, this unit plays DVD -R, DVD +R,
DVD -RW, DVD +RW, SVCD, and CD-R / CD-RW that
contains audio titles, MP3, WMA, and JPEG files.
Depending
equipment or
on
the conditions of the
the CD-R/RW
(or
recording
DVD
-R, DVD +R,
?
designed and manufactured
for playback of region "5" encoded DVD
software. This unit can play only DVD
-RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
discs labeled "5"
cannot be
Notes
DVD
?
code
This unit is
Notes:
?
Regional
played
on
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
use
shaped
or
(the
on
Codes
Most DVD discs have
clearly
a
globe
visible
on
number must match your unit
disc cannot play.
?
DVDs and Video CDs
"ALL".
Regional
numbers in it
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
malfunctions.
Notes
?
on
or
5
with
the
one or more
cover.
regional
This
code
or
the
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears
on
the TV
screen.
Some
playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available
or
other functions may be added.
5
Disc-related terms
DVD±R/DVD±RW
DVD -R and DVD +R
PBC:
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable
two standards for
media, meaning the DVD
erased and re-recorded.
4.38
are
Gigabytes
much. There
only
Single-sided
content
discs
can
can
hold
and double-sided discs hold twice
are no
dual
layer single
be
as
sided recordable
Playback
Playback
Control
(Video
CD
only)
control is available for Video CD
(VCD)
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
CDs.
discs.
Title
VCD
(Video CD)
A title is
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
with
quality
(DVD
stereo sound.
video discs
generally
a
only)
distinct section of
a
DVD disc. For
example the main feature could be title 1,
documentary describing how the film was
a
made could
be title 2, and cast interviews could be title 3. Each
title is assigned a reference number enabling you to
locate it easily.
MPEG
MPEG is
an
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital and MPEG audio.
video discs
Chapter (DVD
A
chapter
film
is
or one
a
segment of
interview in
a
a
only)
title such
series. Each
as a scene
chapter
in
a
is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
may not be recorded.
MP3
MP3 is
audio
popular compression format used for digital
files that yields very high near-CD quality.
a
Scene
On
WMA
Windows media audio file. A
developed by
Microsoft
type of coding / decoding
Corp.
(VCD)
video CD with PBC
(playback control) functions,
moving pictures and still pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
JPEG
Joint Pictures
Expert Group.
file format that allows you to
on the number of colors.
JPEG is
save
compressed
images with no limit
a
Track
A distinct element of audiovisual
information, such
the
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow
track of video
of audio.
6
as
(with multiple angles)
one
and several tracks
Front Panel
1
9
2
8
3
3
4
1.
?
?
?
?
RECORD/RECORD PAUSE
(
)
button
RESET button
CD( )/STEP/SET/COUNTER
TUNING/TIME(-/+), CD SKIP/SEARCH
(/),TAPE REWIND/FAST
FORWARD (
/
) buttons
CD PLAY
PRESET(-/+),
[TAPE REVERSE
(
(
PLAY
) ,TAPE PLAY( )
) button:OPTIONAL]
5
6
LEFT/RIGHT SPEAKERS
4.
LCD
5
CD DOOR
6.
REMOTE SENSOR
2.
)/CLEAR
button
9.
?
FUNCTION SELECT buttons
?
XDSS button
?
AM/FM/BAND button
?
CD SYNC. button
?
REPEAT/RIF/FM MODE button
?
PROGRAM/MEMORY button
?TAPE
SPEED button
?TAPE
SPEED
?S
(-10%, +10%)
(DISPLAY WINDOW)
CD OPEN/CLOSE button
7.
buttons.
?STOP(
7
3.
8.
Introducin
?
VOLUME
?
TIMER button
?
CLOCK button
?
PLAY MODE button
(-/+)
TAPE DOOR
button
:
OPTIONAL
(PUSH EJECT)
indicator
TANDBY/ON
Rear Panel
10
17
11
16
12
15
13
14
10. FM ANTENNA
11
.
14.
MICROPHONE SOCKET
-
3.5mm.(OPTIONAL)
12. AM ANTENNA TERMINAL
13. AUDIO
Input/Output
Connectors
?
OPTICAL OUT Connector
?
S-VIDEO OUT Connector
?
VIDEO OUT Connector
15. AC POWER INPUT SOCKET
16. VOLTAGE SELECTOR
17. HEADPHONE
-
[OPTIONAL]
SOCKET (
PHONES)
3.5mm.
7
Remote Control
1.
POWER button
2.
Function select buttons
(TUNER/BAND, DVD/CD, AUX)
1
3.
NUMBER buttons
4.
TAPE FUNCTION buttons
?
BACKWARD PLAY
?
FORWARD PLAY
?
FAST REWIND/FAST FORWARD PLAY
19
2
18
)
OPTIONAL
button
4
16
)button
5.
SET UP button
6.
MENU button
7.
?
PROGRAM button
?
SCAN(-
?
REPEAT button
?
SLOW(-
?
REPEAT A-B
?
SKIP(-
OPTIONAL
17
RECORD/RECORD PAUSE
?STOP(
3
6
(
):
8.
9.
15
/
buttons
+)
t / T
buttons
+)
/
+)
10. DVD/CD CONTROL buttons
7
8
?STOP(
14
)button
?P AUSE/STEP
9
10
?
PLAY
11 .?EQ
11
13.
button
)
button
)
PATTERN
button
(EQ)
SURROUND(SURR.)
?
XDSS button
?
AUDIO(
?
MARKER button
?
SEARCH button
?
S-TITLE button
?
RETURN
?
CLEAR button
?
ZOOM button
?
SLEEP button
13
12.
(
(
?
12
)
14. VOLUME
button
(
button
)
(-/+)
button
buttons
15. TITLE button
16.
?
ARROW buttons
?
SELECT/ENTER button
17. DISPLAY button
18. PRESET
(
19. MUTE button
8
(
buttons
?
5
(
/
)
buttons
(
)
button
/
)
Window
Display
65
4
3
2
1
Introducin
7
8
9
10
11
12
13
14
1.
function indicator
2.
STEREO indicator
3.
REPEAT indicator
11
4.
CHAPTER/TRACK indicator
12. MUTE indicator
5.
TITLE indicator
13.
6.
PROGRAM indicator
7.
MP3 file indicator
8.
Indicates current audio stream
9.
ANGLE active indicator
Installation and
10.
the
2.
3.
TAPE PLAY MODE
Battery
indicators
(
)
indicator
end of the AC power cord
to the AC IN socket located at the
Installation
Remote Control
Remove the
1.
battery
cover on
the
rear
of the
remote control.
2.
Insert two R03
3.
Replace
(size AAA)
aligned correctly.
the
battery
batteries with
and
cover.
Notes:
?
the AC power cord from the wall outlet if you
do not to use for an extended period of time.
Unplug
the
voltage (OPTIONAL)
If your unit is equipped with a voltage selector, be
sure to set it to your local power supplied before
connecting
)DIRECTION
Setup
backside of your unit.
Plug the other end into the wall outlet.
Adjusting
/
14. SLEEP indicator
Note:
?
(
(OPTIONAL)
one
(supplied)
TAPE PLAY
?
?
connecting the AC power cord, check that
operating voltage of your unit is identical with
voltage of your mains supply.
Connect
PLAY/PAUSE indicator
.
(OPTIONAL)
Before
the
TIMER indicator
?
The AC Power Cord Connection
1.
RECORD/ RECORD PAUSE indicator
?
?
To avoid
damage
possible battery leakage,
remove the batteries if you do not plan to use the
unit for an extended period of time.
When the batteries are weak, replace all the
batteries with
?
from
new ones.
Do not mix old and
new
batteries.
the AC power cord.
9
TV Connections
VIDEO OUT
connection
jack
Connect the VIDEO OUT
to
a
VIDEO IN
AUDIO OUT
jack
of
jacks
TV
a
a
AUDIO IN
AUDIO IN
jack
jacks
Connect the AUDIO
a
of
AUDIO OUT
jack
or
on
the back of the unit
monitor.
connection
Connect the AUDIO OUT
to
jack
jack
TV
a
or
on
a
TV
or
or
Monitor
the back of the unit
monitor.
connection
IN jack on the back
of
TV
of the unit to
monitor.
To TV Video In
S-Video connection
Connect the S-VIDEO OUT
to the S-
VIDEO IN
cable
jack
on
the TV
Rear of UNIT
jack on the unit
using the S-Video
S-VIDEO
VIDEO
VIDEO
.
To Video out
AUDIO AUDIO
OUT
IN
To Audio out Jack
To Audio in Jack
OPTICAL OUT connection
Connect
OUT
optical input
connector (O).
an
of receiver to the OPTICAL
Rear of UNIT
Notes:
?
?
Refer to the owner's manual of your TV as well.
When you connect the unit to your TV, be sure to
turn off the power and
wall outlet before
unplug
making.
both units from the
OPTICAL
IN
Rear of Receiver
Antenna Connection
Connect the
supplied AM(MW)
antennas for
listening
to the radio.
Note:
?
To
prevent noise pickup, keep the AM loop
away from the unit and other components.
antenna
AM
(MW) loop
antenna (aerial)
(Supplied)
For AM
(MW) reception, connect
the loop antenna (aerial) to the
terminal marked AM
10
Sound
Mini
Adjustment
Glossary
for Audio Stream & Surround mode
The Dolby Digital surround format lets you enjoy up to
5.1 channels of digital surround sound from a Dolby
Digital program source. If you play DVDs with
mark, you can enjoy even better sound quality, greater
spatial accuracy, and improved dynamic range.
"
"
BYPASS
Software with multichannel surround audio signals is
played according to the way it was recorded.
Sound
Quality Adjustment
You can choose between 4 fixed sound settings.
Select a desired sound mode by using EQ button
the remote control.
FLAT
: linear frequency response
ROCK
: more bass, more treble
POP
: less bass, less treble
CLASSIC
: for orchestral music
on
Volume
Adjustment
Press VOLUME (+) to increase the sound
press the VOLUME (-) to decrease it.
Dynamic Sound System)
Press XDSS to reinforce treble, bass and the
surround effect. The "XDSS ON" or "XDSS OFF"
indicator lights. To cancel, press XDSS again.
or
MUTE
Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, the "MUTE" indicator flashes in
the display window.
Headphone Socket
Connect
a
stereo
headphone plug ( 3.5mm)
headphone jack.
The speakers are automatically disconnected
you plug in the headphones (not supplied).
into the
when
Microphone Socket (OPTIONAL)
Connect
microphone plug ( 3.5mm)
microphone jack.
a
into the
Adjusting Tape speed
Select the
XDSS (Extreme
level,
TAPE SPEED button
0
/+10) you want by
repeatedly during the tape
tape speed (-10/
press
playback.
-10%→0%→+10%→0%
SURROUND
To activate surround mode
Press SURR. to reinforce surround effect.
SURROUND OFF
↔
SURROUND ON
11
On-Screen
You
Display
the
general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
display
can
Press DISPLAY
1.
Example: On-Screen Display during
playing DVD Video
Selection Method
Items
during playback.
Title Number
Chapter
Press b / B to change the setting. You can also
use the number buttons if appropriate (e.g.
3.
inputting
the title
number).
For
some
functions,
press SELECT/ENTER to execute the
setting.
Notes:
?
?
Some discs may not
shown below.
If
no
provide
button is
for 10
pressed
display disappears.
screen
B,Numbers
SELECT/ENTER
Press v / V to select an item.
The selected item is highlighted.
2.
1/3
b /
all of the features
seconds,
the
on-
Number
1/12
B,Numbers
SELECT/ENTER
Time search
0:20:09
Audio
language
and Digital Audio
Output mode
Subtitle
b /
language
Angle
Numbers, SELECT/ENTER
b/Bor
AUDIO
ABC
1 ENG
b/Bor
S-TITLE
b/B
1/3
Sound
BY PASS
Playback Status/Restrictions
Title
A-B
1/9
MARKER SEARCH
Repeat
title
Repeat
sequence
Enter
Marker
a
Marker Search
Example: On-Screen Display during
playing VCD
Selection Method
Items
menu
Track Number
Resume
Action
play
from this
prohibited
or
point
not available
(or
PBC
Audio Channel
12
b /
B, Numbers
SELECT/ENTER
mode)
Time search
Sound
1/3
Numbers
0:20:09
SELECT/ENTER
b/Bor
STER.
BY PASS
AUDIO
Initial
You
can
Settings
set your
own
Language
Personal Preferences
on
the unit.
Disc
Select
General
1.
setup
appears.
Press 3/4 to select the desired item.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Code
Aspect
Menu
Menu, Audio, and
original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the
language code list on page 28. If you enter the wrong
language code, press CLEAR.
Original
menu
for the disc's
language
a
Subtitle.
Press SET UP.
The
2.
Operation
DVD
Language
Language
:
The
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Spanish
Rating
German
Italian
Country
Chinese
TV
Polish
Menu
Spanish
Code
InstaliodSeup
Italian
Aspect
Chinese
Language
Polish
Hungarian
Hungarian
Other--------
Other-------Others
Others
The
screen
selected
will show the current
item,
as
well
as
setting for the
alternate setting(s).
Menu
Language
Select
a
you
3.
4.
5.
see
for the
language
setup
menu.
selected, press 2, then
Disc Audio
English
3/4 to select the desired
setting.
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
Country
Press SELECT/ENTER to confirm your selection.
Some items require additional steps.
SETUP, RETURN,
or
PLAY to exit the
menu
when you press SETUP.
While the desired item is
Press
This is the
TV
Italian
Code
Aspect
Menu
Language
setup
Others
menu.
Picture
TV
Aspect
DVD
Disc Audio
4:3
Letterbox
Disc Subtitle
4:3
Panscan
Disc Menu
16:9 Wide
Rating
Country
TV
Code
Aspect
Menu
Language
Others
4:3 Letterbox: Select when
connected.
Displays
a
standard 4:3 TV is
theatrical
bars above and below the
4:3 Panscan: Select when
images
picture.
a
with
masking
conventional TV set is
connected. The video material formatted in the Pan &
Scan
style
picture are
is
played
cut off).
back in that
16:9 Wide: Select when
a
style (Both
sides of the
16:9 wide TV is connected.
13
Others
The
DRC, Vocal, PBC and Auto Play settings
can
be
PBC
changed.
Press 3/4 to select the desired item and press
SELECT/ENTER. The setting of the selected item is
changed
between On and Off.
DRC
On
Disc Subtitle
Vocal
On
Disc Menu
PBC
On
Auto
Country
TV
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
Play
Auto
You
Off
to On
or
Off.
played according to the PBC.
played the same way as Audio
Play
can
DVD
set up the unit
so a
DVD disc
automatically
playing whenever the DVD is inserted.
If Auto Play mode is set to On, this unit will search a
title that playback time is longest and then play back
title automatically.
starts
Code
Aspect
Menu
Playback
CDs.
Disc Audio
Rating
Set
Language
On: Auto
Off: Auto
Others
Play
Play
the
function is activated.
function is not activated.
Note:
Dynamic Range
With the DVD
Control
format, you
The Auto
(DRC)
can
hear
a
program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen
without
losing clarity
to
a
movie at
a
lower volume
of sound. Set DRC to On for this
effect.
Vocal
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
a
multi-channel karaoke
mix into normal stereo sound.
14
on
the disc will
Play
function may not work for
some
DVDs.
Parental Control
DVD
Rating
Movies
DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
on
information that
certain
Code
Country
applies
to the
the disc. These
scenes on
disc
complete
or
scenes are
to
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
Enter the code of
are
were
to the list
the 3/4 buttons
.
on
Code Set
US
Disc Menu
Rating
8
TV
Disc Subtitle
7
Menu
Disc Menu
6
Code
Aspect
Language
5
Rating
InstaliodSeup
4
Code
Country
Others
3
Aspect
Menu
using
Disc Subtitle
Country
TV
whose standards
disc, referring
Disc Audio
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
country/area
Select Country Code
the setup menu.
The Parental Control feature allows
country-dependent.
a
used to rate the DVD video
1.
rated
DVD
2
Language
1
2.
While
3.
Follow
4.
Select the first character
5.
Shift the cursor using 2 button and select the
second character using 3/4 buttons.
6.
Press SELECT/ENTER to confirm your country
code selection, then press SETUP to exit the
Country
Unlock
Code is selected, press 2.
Change
Others
1.
Select "Rating"
3/4 buttons.
2.
While
3.
When you have not entered a password.
Enter a 4-digit password using the number buttons
"Rating"
on
the
Setup
using
menu
the
is selected, press 2.
personal 4-digit security password. then
press SELECT/ENTER. Enter the 4-digit password
again and press SELECT/ENTER to verify.
When you have already registered a password;
Enter a 4-digit password using the numbered
buttons to confirm the personal 4-digit security
password, then press SELECT/ENTER.
to create
a
If you make
a
mistake before
SELECT/ENTER, press
security password again.
4.
Select
pressing
CLEAR and enter
4-digit
using the 3/4 buttons.
One (1) has the least playback restrictions. Eight
(8) has the most playback restrictions.
a
rating
Ratings
1 to 8: Some discs contain
scenes
5.
Press SELECT/ENTER to confirm your rating
selection, then press SETUP to exit the menu.
left.
using
the 3/4 buttons.
Note:
Confirmation of the
when the code is
code"
4-digit password is necessary
changed (see "Changing the 4-digit
below.).
Changing
the
code
4-digit
Follow
Steps
(Rating).
2.
Enter the old code, then press SELECT/ENTER.
3.
Select Change using 3/4 buttons then press
SELECT/ENTER.
4.
Enter the new 4-digit code, then press
SELECT/ENTER.
5.
Enter
exactly the same code a second
verify by pressing SELECT/ENTER.
6.
Press SETUP to exit the
If you
1-2
shown above to the left
1.
not
suitable for children. If you set a rating for the
player, all disc scenes with the same rating or lower
will be played. Higher rated scenes will not be
played unless an alternative scene is available on
the disc. The alternative must have the same rating
or a lower one. If no suitable alternative is found,
playback will stop. You must enter the 4-digit
password or change the rating level in order to play
the disc.
on
menu.
from 1 to 8
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
step 3 of "Rating"
as
forget your 4-digit
time and
menu.
code
If you
forget your password, to clear the
password, follow the procedure below.
1.
Press SETUP to
2.
Use the Number buttons to enter the
display
the setup
current
menu.
6-digit
number
"210499".
Note:
This function may not work for
The
some
DVDs.
3.
4-digit password
Enter
a new
code
is cleared.
as
shown above to the left
(Rating).
15
Operation
Auto Function Selection
?
?
If you press CD PLAY (
function will be selected.
)
whilst in radio
Using
mode, CD
If you press PRESET (
/
) or TUNER/ BAND
during CD or CASSETTE play, radio function will be
1.
Select
pressing
the time
5 seconds. This
automatically
cycle
or
TUNING/TIME
delay
before the power is
means
that the
system
turns off
after 90 minutes.
Each time the button is
press and hold
requires setting,
more than 2 seconds.)
24 hour
a
specify
has
turned off, press SLEEP.
In the display window shows "SLEEP 90" for about
the clock is
CLOCK for
2.
To
Press CLOCK.
(If
Function
sleep timer is used, the power is
automatically turned off after the specified time
elapsed.
the Clock
Setting
Sleep
When the
1.
selected.
the
before it turns off is
pressed the time interval
reduced by 10 minutes. i.e.
80...70... etc.
12 hour
Select the desired time to turn off.
cycle by
2.
(-/+).
To check the
remaining
time until the power is
turned off.
function is active press SLEEP
The time remaining until it turns off is
(12HR)
or
(24HR)
3.
Press SET to confirm the selected hour
4.
Use TUNING/TIME
5.
(-/+)
While the
sleep
briefly.
displayed
for about 5 seconds.
Note:
If you press SLEEP while the
the SLEEP time is reset.
cycle.
to set the correct hour.
To cancel the
Press SET.
Use TUNING/TIME
time is
displayed,
timer mode
If you wish to turn off the function, press the SLEEP
button repeatedly until "SLEEP 10" appears, and then
press SLEEP
6.
sleep
sleep
(-/+)
to set the correct
once
again
while "SLEEP 10" is
displayed.
minutes.
7.
Press SET and the correct time is shown
the
8.
on
display.
Press the CLOCK button at any time to
the time for about 5 seconds.
Using Microphone (OPTIONAL)
You
display
sing to a music source by connecting a
microphone to unit.
1. Connect your microphone (not supplied) to
can
MIC socket.
2.
3.
Play a music you want.
Sing along with the accompaniment.
For your reference
You can record during
Refer to the
16
using microphone.
"Recording" explanation section.
the
Timer
?
?
The unit is
turned
automatically
time you want.
Select your desired radio
button and load
TUNING/TIME
station, press DVD/CD
press FUNCTION button
to select the tape mode and insert a TAPE.
1.
a
disc
and off at the
on
Set the hour to switch
5.
(-/+).
6.
Press SET to confirm the hour to switch
7.
Set the minute to switch
on.
or
TUNING/TIME
Press CLOCK to check the current time.
For your reference
If you do not set clock, the timer function doesn't
Press TIMER to enter the timer
TUNER-CD-TAPE flashes in the
setting mode.
display window
on
by pressing
(-/+).
Press SET to confirm the minute to switch
8.
on.
"OFF" indicator appears for about 0.5 seconds
in the display window and then disappears.
work.
2.
by pressing
on
Set the hour to switch off
9.
in
TUNING/TIME
by pressing
(-/+).
turn.
For your reference
-To correct the previous
memorized TIMER
the TIMER button
-
The
previous
10. Press SET to confirm the hour to switch off.
press and hold
than 2 seconds.
setting,
more
memorized timer
11
.
TUNING/TIME
time
on
and TIMER indicators appear in the dis
play window.
Press SET when the desired function is
by pressing
(-/+).
12. Press SET.
13.
3.
Set the minute to switch off
Adjust
the volume level
TUNING/TIME
by pressing
(-/+).
flashing.
14. Press SET.
4.
a.
When you select the TUNER function, "PLAY"
and 'REC' indicator flash in the display
window
alternately
"PLAY" indicator
:
"REC" indicator
:
""
appears in the display window and the timer
setting has been completed.
for about 3 seconds.
TUNER
play only
TUNER play and
recording
15. Switch the
system into standby.
The selected function is
automatically
switched
on
and off at the times set.
b. Press SET when the desired function is
To cancel
flashing.
c.
Select the
previous
with TUNING/TIME
memorized
(-/+)
preset number
button and press
Each time the TIMER button is
the timer set
SET.
setting
"ON" indicator appears for about 0.5 seconds
in the display window and then
To activate
disappears.
When you select the CD
or
TAPE
check the timer
or
button
or
cancel. You
you can select
also check the timer
pressed
can
status.
or
"
timer, press the TIMER
"
appears in the display window.
To cancel the TIMER, press the TIMER button so that
""
so
that
check the
disappears
in the
display
window.
functions,
-"ON" indicator appears for about 0.5
seconds in the display window and then
disappears.
17
the Radio Stations
Presetting
You
can
50 stations for FM and
preset
1.
tuning,
Press AM /FM/BAND
make
(or
AM/FM/BAND(or TUNER/BAND on the
remote control) to select the frequency band
(FM or AM) you want.
Every time you press this button, FM and AM
changes alternately.
sure
TUNER/BAND
on
the
control) to select the frequency (FM
AM(SW:OPTIONAL)) you want.
Every time you press this button, FM and AM
changes alternately.
remote
2.
Select
station you want
TIME (-/+) buttons.
a
in
Tuning
Press PRESET
2.
remote
(-/+) briefly
and
a
Adjust the volume by
repeatedly.
1
?
station.
?
Press PROGRAM/MEMORY
on
the front
panel.
For automatic
on
the
Press
:remote
/
number
you want.
tuning, press
front panel.
Press PROGRAM/MEMORY
(-/+)
buttons
2.
and hold TUNING/TIME
STANDBY/ON) to turn the unit off
function mode (DVD/CD or TAPE).
For your reference
?
If an FM program is
Press FM/MODE
5.
the preset
POWER(
Press PRESET
(
the
To turn off the radio
preset number will flash in the display window.
(-/+:unit) or PRESET
control) to select the preset
VOLUME
non-preset radio stations
Use manual or automatic tuning in step
select another
4.
on
To listen to
(-/+)
A
)
-
3.
-
3.
(-/+) or PRESET ( /
control) repeatedly to select
station you want.
Each time you press the button, the unit tunes in
one preset station at a time.
TUNING/
repeatedly.
Tuning in automatically
Press TUNING/TIME (-/+) for more than
second. Scanning stops when the unit
tunes in
The last received station is tuned in.
or
manually
Press TUNING/TIME
-
by pressing
to the Radio
Press
1.
AM(SW:
that you have
turned down the volume to the minimum.
OPTIONAL).
Before
Listening
again.
so
noisy
"
that "ST
display window. There will
the reception will improve.
The station is stored.
be
no
disappears
stereo
in the
effect, but
Press FM/MODE
again
to restore the stereo effect.
6.
Repeat steps
1
(or 2)
to 5 to store other
?
stations.
When
recording
a
MW(AM) broadcast,
noises may occur. If it does, press RIF
"kHz" flash in the display window.
beat
once.
-
To delete all the memorized stations
Press and hold PROGRAM/MEMORY
?
on
the front
panel for about two seconds, "CLEAR ALL" flash in
display window and then press STOP() /CLEAR
again, the stations are deleted.
For your reference
If all stations have
-
the
already
been
preset number, follow the steps
To recall
entered,
FULL
appears
18
4-5.
presets
Press and hold PRESET
:remote
control)
or
(-/+:unit)
until the desired
press it
the antenna to
repeatedly.
or
PRESET
(
preset number
/
get
more
clear
reception.
AM antenna
This antenna is built within the unit and rotate
the unit for better
-
reception.
FM antenna
Pull the
message will appear in the display window for a
moment and then a preset number will flash. To change
the
Adjust
telescopic
or
antenna out
and direction for better
adjust
reception.
the
angle
Tape Playback
Tape Recording
Use
Wind the
tape
Use
normal
only
Basic
normal
tapes during playback.
Basic
the cassette door by pushing TAPE
DOOR (PUSH EJECT) point.
2.
tapes.
Insert
a
Recording
1.
Select the function (DVD/CD
you want to record.
2.
the cassette deck and insert a blank
cassette into the cassette compartment.
Open
3.
starts.
point recording
Playback
Press FUNCTION to select tape function.
("NO TAPE" appears in the display window.)
1.
only
to the
or
TUNER/
Open
cassette and close the cassette door.
To set the
4.
Press TAPE PLAY (
) [or TAPE REVERSE
PLAY (
): OPTIONAL] button.
To
Stop Play
Press
STOP(
recording direction (seulement
AUTO REVERSE DECK)
Press PLAY MODE repeatedly to set the
recording direction.
Recording
) during playback.
Auto
Stop Deck
After playing one
automatically.
side of the
Auto Reverse Deck
You
select direction of the cassette you want
pressing the PLAY MODE button.
can
Pressing
by
Press (
) or PLAY(
the remote control.
The recording begins.
The CD
After the cassette
cassette.
reverse
plays
front
side, stops
After the cassette
times
repeatedly
reverse
plays
Local
1.
2.
TAPE
playback.
-
-
-
The local
repeat ending point is
synchro recording function dubs a complete
programmed titles automatically onto a
The
during TAPE playback.
repeat starting point is set.
during
).
2.
?
once
STOP(
Press CD SYNC. in stop mode.
"REC" flashes and "CD SYNC" displays in the
display window.
Press REPEAT A-B button
Press REPEAT A-B button
or
synchronized recording starts
automatically after about 8 seconds.
Notes:
Repeat (OPTIONAL)
-The local
panel
1.
side, stops
automatically.
the front
Tape Synchronized Recording
CD and
six
front and
on
stop recording
CD to
automatically.
Three times
REC"
plays front
or reverse (backward play)
side, stops automatically.
and
Twice
"
-
)
recording
) during recording.
flashes in display window.
Press TAPE
After the cassette
Once
To pause
Press (
To
Function
Display
CD
2.
tape, the unit stop
:
or
Press (
) on the front panel or the remote
control and then select the DVD/CD or
TUNER/BAND function.
"REC" flashes and holds the cassette in pause
mode.
or
:
from Radio
modele
1.
To
Play Rewind or Fast Forward
Press (
/
) on the front panel or
/
(
) on the remote control during playback
stop, press PLAY( ) at the point you.
BAND)
?
If you wish to record format specific track, select the
track with CD SKIP/ SEARCH (.m / M>)
(or SKIP . / > on the remote control) before
commencing CD synchro recording.
It is not possible to change the function whilst in
record mode.
set.
"TP A-B" appears in the display window.
This function repeats three times.
Note:
If is not
possible
to set this feature for less than 3
seconds.
19
Playing
a
Playback Setup
Turn
on
General Features
DVD and Video CD
DVD
VCD
Note:
the TV and select the video
input
Unless stated
source
connected to the unit.
Audio
the
1.
2.
3.
system: Turn
input
source
on
the remote control. Some features may also be
available on the Setup menu.
use
the audio
system and select
connected to the unit.
When
Load your chosen disc in the tray, with the
playback side facing down.
another title
OPEN/CLOSE to close the tray.
Press
READING appears on the TV screen, and
playback starts automatically. If playback does not
start, press PLAY.
In some cases, the disc menu might appear
instead.
Press
Moving
a menu screen
The
is
displayed
disc has
may be displayed first after
Video CD which offers a menu.
menu screen
DVD
or
loading
a
another
want to
title/chapter
view, then press SELECT/ENTER
you
or
MENU to return to the
menu screen.
To go
VCD
Press RETURN to return to the
menu screen.
Menu
setting and the exact operating procedures
using the menu may differ depending on the
disc. Follow the instructions
on
the each
1/3
title
on a
more
setup.
one
than
more
track, you
as
chapter
one
can move
or
or a
to
follows:
>
briefly
to
step back
directly
If Parental Control is set and the disc is not within
Rating settings (not authorized),
the
4-digit
2.
to the
return
previous
regional
play discs
a
code
code.
that have
code different from your unit. The
this unit is 3 (three).
regional
regional code
chapter during
DVD
playback,
DVD
the numbered buttons
VCD
Press SCAN m
now
or M
during playback.
go into SEARCH mode.
Press SCAN m
or M
repeatedly
to select the
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward). With a Video CD, the
Search speed changes: mX2, mX4, mX8,
(backward) or MX2, MX4, MX8, (forward).
must be entered and/or the disc must be authorized.
DVDs may have
Your unit will not
to any
two-digit numbers, press
(0-9)in rapid succession.
1.
Notes:
a
for
3.
To return to normal
play, press
PLAY.
output sound the DVD disc which becomes
the DTS.
20
than
chapter/track
The unit will
It is not
disc has
For
Search
You also may set PBC to Off under
?
DVD
Note:
menu
screen.
?
number.
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
Use the number buttons to select the track you want
to view.
the
title/group
a
to another CHAPTER/TRACK
Press . twice
to start
to
chapter/track.
Press TITLE
?
can move
briefly during
playback to select the next chapter/track or to
to the beginning of the current chapter/track.
playback.
for
to select
(0-9)
Press SKIP .
DVD
Use the 1 234 buttons to select the
title, you
one
follows:
as
1 /12
a
than
more
DISPLAY, then press the appropriate number
button
When
If
disc has
a
1/3
DVD
to another TITLE
Moving
OPEN/CLOSE to open the disc tray.
Press
otherwise, all operations described
Pause
DVD
VCD
1.
Press PAUSE/STEP
2.
To return to
during playback.
playback, press
PLAY.
General Features
Still Picture and
DVD
Video CDs
Frame-by-frame playback
1.
VCD
Press PAUSE/STEP
1.
(continued)
The unit will
You
now
during playback.
go into PAUSE mode.
2.
can
by
DVD
Press SLOW t
The
The
Use the SLOW t
2.
during playback.
second time.
Repeat
All icon appears
Off icon appears
Repeat
On
a
Video CD with
the
setup
to
menu
mode, press PLAY.
in
a
third
screen.
must set PBC to Off
the
Repeat
on
function.
reverse
is not
1.
applicable
0:20:09
DVD
-:--:--
Press DISPLAY
during playback.
for
on
the
playing
The on-screen
screen.
The Time Search box shows the
elapsed playing
time of
the current disc.
A-B
A*
REPEAT
The Time Search function allows you to start
at any chosen time on the disc.
Video CD.
Repeat
screen.
the TV
on
PBC, you
use
display appears
playback
the TV
on
Repeat mode, press
Time Search
Note:
Slow motion
screen.
to select the
or T
To exit slow motion
the TV
Note:
required
speed:t1/16,t1/8,t1/4ort1/2
(backward), or T 1/16, T 1/8, T 1/4 or T 1/2
(forward).
3.
on
time.
press PLAY.
will enter SLOW mode.
player
a
To exit
VCD
or T
Track icon appears
repeat the disc currently playing, press
The
Slow Motion
1.
play,
To
Repeat
REPEAT
3.
To return to normal
repeat the track currently playing, press
The
remote control.
3.
Track/All/Off
Repeat
REPEAT.
advance the picture frame-by-frame
pressing PAUSE/STEP repeatedly on the
2.
To
-
DVD
2.
VCD
AB
Within 10 seconds, press 3/4 to select the
Time Search icon in the on-screen display.
OFF
Operation
The "-:--:--" appears in the Time Search box.
To
1.
repeat
sequence in
a
a
3.
title:
Press REPEAT A-B at your chosen
starting
2.
A
*
"
appears
briefly
on
Press REPEAT A-B
the TV
again
at your chosen end
sequence
3.
briefly
begins.
on
the TV screen, and the
repeat
Repeat
enter
an
Camera
TRACK
DVD Video Discs
1.
To
ALL
Repeat Chapter/Title/Off
repeat the currently playing chapter, press
2.
icon appears
To
repeat the title currently
REPEAT a second time.
The
3.
Repeat Chapter
Repeat
To exit
remove
invalid
time, playback
the disc. If you
will continue from the current
on
Angle
Title icon appears
1/3
DVD
OFF
REPEAT.
The
in the box.
right
starts from the selected time
If the disc contains
-
hours, minutes,
point.
VCD
TITLE
CHAPT
start time. Enter
Within 10 seconds, press SELECT/ENTER to
confirm the start time.
Playback
To cancel the sequence, press REPEAT A-B.
DVD
required
numbers.
4.
"A B" appears
enter the
the number buttons to
use
If you enter the wrong numbers, press CLEAR to
the numbers you entered. Then enter the correct
screen.
point.
seconds,
and seconds from left to
point.
"
Within 10
the TV
angles, you can change
angle during playback.
1.
Press DISPLAY
display appears
2.
to
a
different
during playback.
on
the
camera
The on-screen
screen.
Use the 1 2 buttons to select
The number of the current
the TV
recorded at different
camera
screen.
playing, press
on
Repeat mode, press
on
scenes
angle
a
desired
appears
on
the
angle.
display.
screen.
REPEAT
a
third
time.
The
Repeat
Off icon appears
on
the TV
screen.
21
General Features
Zoom
DVD
(continued)
Special
Checking
VCD
Press ZOOM during playback or still
to activate the Zoom function.
If you press ZOOM
increases up to six
repeatedly,
option. Or,
through
the
move
function may not work for
DVD
Marker Search
You
playback
or
If the current title has
the
The
DVDs.
some
nine
points
To enter
1.
start
a
playback
menu can
a
memorized
point. Up
to
To
remove
During disc playback, press MARKER when
playback reaches the spot that you want to
2.
Repeat step
a
The disc
To
2.
1.
During
3.
points
on
a
disc
playback, press
During
menu
will appear
on
the
disc
to hear
playback, press
menu
Repeat steps
a
the Audio Channel
VCD
repeatedly during playback to hear a
audio channel (STER., LEFT or RIGHT).
Subtitles
different
DVD
ABC
1 ENG
repeatedly during playback
subtitle languages.
to
see
the
SEARCH.
will appear
on
the
Note:
screen.
Press CLEAR.
remove
repeatedly during playback
audio language or audio track.
Press S-TITLE
Marked Scene
SEARCH.
22
Language
scene.
Press 1/2 to select the Marker number that you
To
the Audio
5.1 CH
different
2 and 3 to erase additional
Marker numbers.
5.
again.
Press AUDIO
The Marker number will be erased from the list.
4.
the disc menu, press MENU
D
Changing
a
want to erase.
3.
displayed.
screen.
the MARKER SEARCH menu, press
The MARKER SEARCH
2.
Changing
different
SEARCH.
1.
is
Press AUDIO
SEARCH.
will start from the Marked
remove
a
again.
Marked Scene
Press SELECT/ENTER.
To clear
for the
DVD
menu
remove
DVD
Within 10 seconds, press 1/2 to select
Marker number that you want to recall.
To
angles, spoken
options, and chapters
camera
1 ENG
Playback
4.
may appear.
briefly.
screen
1 to enter up to nine Marker
The MARKER SEARCH
2.
the TV
disc.
To Recall
on
Press MENU.
memorize.
on
menu
will appear
the title menu, press TITLE
Disc Menu
1.
mark, follow these steps.
The Marker icon will appear
menu
title.
be memorized.
can
list
and subtitle
language
VCD
from
menu, the
a
Otherwise, the disc
screen.
MARKER SEARCH
can
your
Press TITLE.
1.
3.
1/9
highlight
DVD
Title Menu
2.
zoom
the 1 234 buttons to
use
selection, then press SELECT/ENTER.
Note:
The
DVDs may offer menus that allow you to access
special features. To use the disc menu, press MENU.
Then, press the appropriate number button to select
an
level
Press CLEAR to resume normal
return to the paused image.
3.
playback
magnification
the contents of DVD Video discs:
steps.
Use the 1 234 buttons to
zoomed picture.
2.
the
DVD
Menus
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1.
DVD Features
the MARKER SEARCH menu, press
If
appears, the feature is not available
on
the disc.
Playing
Disc
an
MP3
CD
The unit
CD-ROM, CD-R
Before
on
1.
playing
MP3/WMA
Insert
WMA
or
recordings
MP3/WMA
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
MPEG1 audio
MP3/WMA
read the notes
recordings,
Recordings on right.
files that have
The
player
can
not read
extension other than
a
the TV
on
About
go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
screen
on
appears
the TV
Recordings
An MP3 file is audio data
on
CD-RW discs.
disc and close the tray.
Audio CD; Audio CD menu appears
menu
on
About MP3
MP3/WMA formatted
play
can
Notes
Audio CD and MP3/WMA
screen.
Go to
step
MP3 file that has
an
".mp3".
Microsoft audio
a
compression
technology.
WMA(Windows Media Audio) offers double
audio compression of the MP3 format.
MP3 WMA
file
WMA(Window Media Audio)
An WMA file is
2
a
the
JPEG
Press 3/4 to select the MP3/WMA then press
SELECT/ENTER.
2.
The MP3/WMA
appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice
menu
menu.
MP3/WMA Disc
limited
1.
as
with this unit is
compatibility
follows:
Sampling Frequency / only at 44.1kHz (MP3),
32 44.1kHz (WMA)
Bit rate / within 32 320kbps (MP3),
32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
-
2.
-
-
MP3 WMA
Program
3.
Folder1
4.
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
MP3/WMA files. We recommend that you use
"Easy-CD Creator", which creates an ISO9660 file
Clear All
Folder8
OFF
00:00
Operation
system.
3.
Press 3/4 to select
SELECT/ENTER.
a
5.
folder, and
Press 3/4 to select
SELECT/ENTER.
a
wish to
track then press PLAY
or
stop
Press TITLE to
Press MENU to
to the
playback
or use a new one.
should be named
using 8 letters
incorporate ".mp3" or ".wma"
e.g. "********.MP3"
7.
or
or
"********.WMA".
Donotusespecialletterssuchas"/:*?"<>"
etc.
8.
page.
Total number of files
on
the disc should be less
than 650.
Program
MP3 WMA
Program
CD
previous
names
MP3/WMA file in the
no
extension
and
to the next page.
move
File
less and must
at the end of the disc.
move
playback
MP3/WMA files in
requires
MP3/WMA files. If you
MP3/WMA files, format all the
cannot
data in the disc
6.
menu.
Playback
session disc
track, it
1st
Playback starts.
During playback, the current track's elapsed
playing time will appear on the display window
will
single
the first track. If there is
A list of files in the folder appears.
4.
A
TRACK01
This unit
TRACK 1
TRACK02
TRACK 2
TRACK03
TRACK 3
TRACK04
TRACK 5
TRACK06
TRACK 6
TRACK07
TRACK 7
Clear All
TRACK08
STER.
0: 56: 18
Audio CD
playback quality.
Clear All
TRACK 8
00:00
BYPASS
1
MP3/WMA
menu
OFF
menu
are
Folder
list,
in
a
file list and want to return to the
use
the 3/4 to
SELECT/ENTER to return
and press
highlight
to the previous menu
screen.
5.
To
stop playback
MP3
or
are
WMA
files). That require certain pre-existing
(see above) to insure compatible playback.
Customers should also note that
required
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
right to grant such permission. Permission should
always
at any other
are
optimal
automatically
many different types
of recordable disc formats (including CD-R containing
Tip:
If you
Pre-recorded DVDs
set to these standards. There
conditions
?
to meet
certain technical standards in order to achieve
TRACK 4
TRACK05
requires discs/recordings
be
sought
from the
copyright
owner.
time, press
STOP.
23
Pause
Repeat
1.
Press PAUSE/STEP
2.
To return to
during playback.
playback, press
PAUSE/STEP again.
PLAY
To
or
1.
press
repeat
Moving
2.
Press SKIP .
or
>
Press SKIP. twice
previous
In
case
briefly
to
step
CD,
3.
back to the
directly to any track,
using the numbered buttons
to go
enter the track number
Repeat
"
appears
again
the
on
menu screen.
at your chosen end
icon and "A B" appears
and the sequence
track.
of audio
icon and "A
Press REPEAT A-B
The
to return to the
or
Repeat
*
point.
briefly during
playback to go to the next track
beginning of the current track.
a
sequence.
During disc playback, press REPEAT A-B at
your chosen starting point.
The
to another Track
A-B
begins
to
on
the
menu
screen,
play repeatedly.
To exit the sequence and return to normal
press REPEAT A-B again.
The
Repeat
icon and "OFF" appears
on
the
play,
menu
screen.
(0-9) during playback.
Changing
Repeat Track/All/Off
1.
To
repeat the track
REPEAT.
The
Repeat
Press AUDIO
different
currently playing, press
icon and "TRACK" appears
the
on
menu
screen.
2.
To
repeat all tracks
on a
disc, press REPEAT
a
second time.
The
3.
Repeat
icon and "ALL" appears
To cancel
Repeat mode, press
REPEAT
icon and "OFF" appears
on
on
the
menu screen.
a
third
time.
The
Repeat
the
menu
screen.
Search
1.
Press SCAN m/M
The
2.
player
will
now
during playback.
go into SEARCH mode.
Press SCAN m/M
repeatedly
to select the
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search
speed
and direction
are
indicated
on
screen.
3.
24
To exit SEARCH
the Audio Channel
mode, press PLAY.
the
menu
repeatedly during playback to hear a
audio channel (STER., LEFT, or RIGHT).
JPEG disc
Viewing
a
This unit
play
discs with JPEG files and Kodak
CD. Before
picture
notes
can
JPEG
on
JPEG
Insert
playing JPEG recordings,
Recordings on right.
read the
disc and close the tray.
The MP3/WMA-JPEG choice menu appears
the TV screen.
1.
Moving
Press SKIP .
a
on
Press PAUSE/STEP
1.
The unit will
Press 3/4 to select the JPEG then press
SELECT/ENTER.
menu
appears
on
the TV
>
during viewing a picture
to the previous file.
once
or
Still Picture
slide show.
during
2.
go into PAUSE mode.
To return to the slide show, press PLAY
press PAUSE/STEP again.
To
flip
JPEG
The JPEG
or
to advance to the next file
MP3 WMA
2.
to another File
the
now
or
picture
screen.
Press 3/4
during showing a picture
picture horizontally or a vertically.
JPEG
to
flip
the
Folder1
Folder2
Folder3
Folder4
To rotate
Folder5
picture
Folder6
Folder7
Press 1/2
Folder8
Slide
Speed
Off
Press 3/4 to select a folder, and SELECT/ENTER.
A list of files in the folder appears.
3.
Press RETURN to
choice
move
to the MP3/WMA-JPEG
menu.
Tip:
clockwise
Notes
on
or
JPEG
a
picture
Recordings
upon the size and number of the JPEG
files, it could take a long time for the unit to read the
disc's contents. If you don't see an on-screen
Depending
after several
---
minutes,
some
less than 2 mega
pixels
be less than 650.
menu screen.
If you want to view a particular file, press 3/4
to highlight a file and press SELECT/ENTER or
PLAY.
Viewing the file proceeding starts.
During viewing a file, press RETURN
the previous menu (JPEG menu).
Press TITLE to
move
to
to the next page.
Press MENU to move to the previous page.
JPEG
on
move
Folder1
When you are using software such as
Creator" to burn the jpeg files into the
when
copying
rename
File
them
names
shown
Picture2
into the CD
"Easy
CD
CD-R,
ensure
".jpg"
extensions
layout.
If the files have
to be read
Picture1
the disc should
Some disc may be incompatible due to different
recording format or condition of disc.
that all the selected files have the
to
Operation
are
and burn another disc.
"
and press SELECT/ENTER to return to the
of the files
reduce the resolution of the JPEG files to
Total number of files and folders
"
to rotate the
counter clockwise.
highlight
previous
4.
picture
display
too big
If you are in a file list and want to return to the
Folder list, use the 34 buttons on the remote to
during showing
as
".jpe" or ".jpeg" extensions, please
as ".jpg" files.
without
by
".jpg"
extension will not be able
this unit. Even
JPEG
image
though
the files
files in windows
are
explorer.
Picture3
Picture4
Picture5
Picture6
Picture7
5/32
1024X768
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
Tip:
?
There
three
Slide
Speed options: Fast,
Normal, Slow, and Off. Press 1/2 to highlight the
Slide Speed then press 3/4 to select the option
are
viewing
you want to use, and press SELECT/ENTER.
5.
To
stop viewing
The JPEG
menu
at any other
time, press STOP.
appears.
25
Programmed Playback
with Audio CD and
Programmed Playback
MP3/WMA Disc
The
Note:
function enables you to store your
favorite tracks from any disc in the player memory.
Program
Program
1.
can
in the
stop mode
mode.
during playback or
enter the Program Edit
E
mark will appear to the right of the word
the right side of the menu screen.
on
on
a
Video CD with
the
setup
Program
Press PROGRAM
The
On
contain 30 tracks.
to
with Video CD
can
PBC, you
to
menu
use
the
must set PBC to Off
Program
function.
contain 30 tracks.
1.
Insert Video CD and close the tray.
2.
Press PROGRAM while
The VCD
Program
menu
playback
is
stopped.
will appear.
Program
Program
VCD
E
TRACK 1
Note:
TRACK 2
TRACK 3
Press PROGRAM to exit the
E
the
mark will
Edit
Program
mode;
TRACK 4
TRACK 5
disappear.
TRACK 6
TRACK 7
Clear All
TRACK 8
Select
2.
place
a
track, then press SELECT/ENTER
the selected track
2 to
3.
Repeat step
Program list.
place
the
on
Program
additional tracks
to
list.
on
the
Note:
Press RETURN
or
PROGRAM to exit the
Program
menu.
3.
Program
CD
TRACK 1
TRACK 12
TRACK 2
TRACK 8
TRACK 3
TRACK 10
TRACK 4
E
TRACK 1
TRACK 2
TRACK 2
TRACK 4
TRACK 3
TRACK 3
TRACK 3
TRACK 5
TRACK 6
TRACK 7
TRACK 7
Clear All
TRACK 8
0: 56: 18
STER.
Audio CD
BYPASS
00:00
OFF
3
MP3/WMA
menu
on
track you selected last is
the program list.
programmed
menu
highlighted
Press 3/4 to select the track you want to start
playing.
Press TITLE to
to the next page.
Press MENU to move to the previous page.
6.
move
Press PLAY to start.
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback begins
Playback stops after
have played once.
7.
To
all of the tracks
on
the
Program
playback from
programmed playback, select a track of
CD (or MP3/WMA) list and then press
resume
normal
SELECT/ENTER.
"PROG." indicator
26
disappears
on
the
menu screen.
To
on
left.
playback from
programmed playback, press PROGRAM.
resume
normal
"PROG." indicator
Clear All
TRACK 8
Press 2.
The
with Audio CD and MP3/WMA disc"
4.
TRACK 4
TRACK 6
5.
E
steps 2-6 of "Programmed Playback
TRACK 8
TRACK 5
4.
Program
MP3 WMA
Follow
list
disappears
in the
display
window.
Repeat Programmed
To
Last Condition
Tracks
DVD
repeat the track currently playing, press
Repeat
icon and "TRACK" appears
on
the
menu
screen.
To
repeat all tracks
REPEAT
The
a
Repeat
To cancel
the program
second time.
on
icon and "ALL" appears
Repeat mode,
list, press
the
on
menu screen.
press REPEAT
a
settings for the last disc
that you have viewed. Settings remain in memory
even if you remove the disc from the player or switch
off the player. If you load a disc that has its settings
memorized, the latest stop position is automatically
recalled.
Notes:
Repeat
icon and "OFF" appears
on
the
menu screen.
?
?
Erasing
1.
Track from
a
Program
List
during playback (Audio CD
and MP3/WMA disc only) or in the stop mode
to enter the Program Edit mode.
Press PROGRAM
E
The
2.
move
to the
System
4.
Program
The track will be erased from the
1.
Follow
list.
List"
2.
Program
Complete Program
steps
1-2 of
"Erasing
a
list.
more
Program
system
AUTO).
system does not coincide with
the system of your TV, normal colour picture may
displayed.
Select when unit is connected with
Multi
Track from
a
When the selected
AUTO:
List
or
your
remote control
than 5 seconds to be able to select
(PAL, NTSC,
not be
above.
as
appropriate system mode for
DISC appears in the display
system. If NO
window, press and hold PAUSE/STEP
Press CLEAR.
the
Select
TV
Use 3/4 to select the track that you wish to
erase from the Program list.
Erasing
are
You must select the
mark will appear.
Press 2 to
stored in memory for use any time.
This unit does not memorize settings of a disc if you
switch off the unit before commencing to play it.
Settings
for
3.
user
third
time.
The
VCD 1.1
CD
This unit memorizes the
REPEAT.
The
Memory
system TV.
NTSC:
Select when unit is connected with NTSC-TV.
PAL:
Select when unit is connected with PAL-TV.
Operation
Use 3/4 to select "Clear All", then press
SELECT/ENTER.
The
complete Program
The programs
are
for the disc will be erased.
also cleared when the disc is
removed.
27
Reference
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Country Codes
Choose
a
country code from this list.
Country
Afghanistan
Argentina
28
Code
Code
Code
ET
Country
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
AR
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
Czech
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Republic
AF
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
Country
Code
Country
Ethiopia
Fiji
SG
SK
UG
Troubleshooting
Check the
following guide
for the
possible
cause
Symptom
a
problem
before
?
?
picture.
Correction
The power cord is disconnected.
?
the power cord into the wall
outlet securely.
The TV is not set to receive DVD
?
Select the
signal
The video cable is not connected
?
securely.
?
playback picture
is
Plug
mode
output.
?
The
service.
contacting
Cause
No power.
No
of
video
appropriate
input
picture from
the TV
so
the
the unit appears
on
the TV
on
screen.
Connect the video cable into the
jacks
securely.
The connected TV power is turned off.
?
The disc is
?
No disc
?
An
?
The disc is
?T
urn on
the TV.
?
Clean the disc.
?
Insert
a
disc
?
Insert
a
playable
?
Place the disc with the
dirty.
poor
The unit does not start
playback.
or
tape
unplayable
is inserted.
disc
or
tape
placed upside
is inserted
down.
or
tape
disc
or
tape.
playback
side
down.
?
The disc is not
?
The disc is
?Amenu
is
placed
within the
guide
dirty.
on
the TV
screen.
?
Place the disc on the disc
correctly inside the guide.
?
Clean the disc.
?
Press the SET UP button to turn off
the
?
?
The remote control does
not work
properly.
The
Rating
level is set.
The remote control is not
remote
?
sensor
pointed
at the
?
of the unit.
menu screen.
Cancel the
the
rating
Rating
function
sensor
of the unit.
?
Operate the
23ft(7m).
?
There is
?
Remove the obstacle.
?
Replace
path
of the
change
Point the remote control at the remote
The remote control is too far from the unit.
obstacle in the
or
level.
?
an
tray
remote control within about
remote control and the unit.
?
The batteries in the remote control
are
the batteries with
new ones.
exhausted.
29
Specifications
Power
Power
5.1kg
External dimensions
CD/ VD
A[Tuner] M F(MMW)
(option)
[TAPE]
Designs
30
Refer to the mainlabel of the unit
Mass
[Genral]
SW
Refer to the mainlabel of the unit.
supply
consumption
(W
x
H
x
D)
475
180
x
x
260
Output Power
Speakers
5WX2
Laser
Semiconductor
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Tuning Range
Intermediate Frequency
Tuning Range
Intermediate Frequency
Tuning Range
Intermediate Frequency
Recording System
Frequency Response
Signal to Noise Ratio
PAL
and
specifications
mm
6ΩX2
are
subject
laser, wavelength
650
nm
(DVD),
780
625/50, NTSC 525/60
100Hzto18kHz
More than 75 dB
with ZHF-A at SPK
(1 kHz,
OUT)
More than 85 dB
0.7 %
(1
65 -74
kHz with 30 kHz
MHz,
LPF)
87.5 -108 MHz
or
87.5 -108 MHz
10.7 MHz
522
-
1611
kHz,
530
-
1610 kHz
450 kHz
5800
-
18000 kHz
450 kHz
4 Tracks 2 channel stereo
125
-
8000Hz
43/45dB
to
change
(REC/PLAY)
without notice.
or
530-1720 kHz
mm
(CD)
P/NO :3834RC0030M
Download PDF

advertising