LG | SB16 | LG SB16 Owner’s Manual

ENGLISH
PORTUGUÊS
FRANÇAIS
OWNER’S MANUAL
STYLISH PORTABLE
BOOM BOX
Please read this manual carefully before operating
your set and retain it for future reference.
SB16 (SB16)
P/NO : MFL67233803
SB16-A0U-ANGAFLK-ENG.indd 1
11. 03. 31
1:59
SB16-A0U-ANGAFLK-ENG.indd 2
11. 03. 31
1:59
Getting Started
3
Safety Information
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
SB16-A0U-ANGAFLK-ENG.indd 3
Refer to the label attached on the bottom of the
unit.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
1
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
11. 03. 31
1:59
4
Getting Started
This device is equipped with a portable battery or
accumulator.
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live System, you cannot use
it on LG player. (Mastered/Live File System : Disc
format system for windows Vista)
SB16-A0U-ANGAFLK-ENG.indd 4
In NIGERIA
POWER: This unit operates on a mains supply of
200 - 240 V~, 50/6 0Hz.
WIRING: This unit is supplied with a BSI 1363 approved
13 amp mains plug, fused at 5 amp. When replacing the
fuse always use a 5 amp BS 1362, BSI or ASTA approved
type. Never use this plug with the fuse cover omitted.
To obtain a replacement fuse cover contact your dealer.
If the type of plug supplied is not suitable for the mains
sockets in your home, then the plug should be removed
and a suitable type fitted. Please refer to the wiring
instructions below:
WARNING: A mains plug removed from the mains lead
of this unit must be destroyed. A mains plug with bared
wires is hazardous if inserted in a mains socket. Do not
connect either wire to the earth pin, marked with the
letter E or with the earth symbol or coloured green
or green and yellow. If any other plug is fitted, use a 5
amp fuse, either in the plug, or at the distribution board.
IMPORTANT: The wires in this mains lead are coloured
in accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the
wires in the mains lead of this unit may not correspond
with the coloured marking identifying the terminals
in your plug, proceed as follows: The wire which is
coloured blue must be connected to the terminal which
is marked with the letter N or coloured black. The wire
which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured
red.
11. 03. 31
1:59
Table of Contents
Table of Contents
5
Operating
13
13
13
Maintenance
– Handling the Unit
– Notes on Discs
1
Getting Started
3
6
6
7
Safety Information
Accessories
Playable file Requirement
Front panel
Troubleshooting
14
Troubleshooting
2
Appendix
Connecting
8
8
8
9
9
9
9
9
9
15
Specifications
Power Source
– Battery Installation
– AC Power Cord Connection
Other Equipment Connection
– USB Connection
– Removing the USB Device from the
unit
– Compatible USB Devices
– USB device requirement
– PORT. IN Connection
3
4
5
System Setting
10
10
11
11
11
12
12
Basic Operations
Other Operations
Radio Operations
– Listening to the radio
– To turn off the radio
Recording to USB
– To select recording bit rate and speed
SB16-A0U-ANGAFLK-ENG.indd 5
6
11. 03. 31
1:59
6
Getting Started
Accessories
Please check and identify the supplied accessories.
1
Playable file
Requirement
Getting Started
MP3/ WMA music file requirement:
MP3/ WMA file compatibility with this unit is limited
as follows :
AC Power cable (1)
y Sampling frequency : between 32 to 48 kHz
(MP3), within 32 to 48kHz (WMA)
y Bit rate : between 32 to 320 kbps (MP3),
40 to 320 kbps (WMA)
y Maximum files : Under 999
y File extensions : “.mp3”/ “.wma”
y CD-ROM file format : ISO 9660/ JOLIET
y We recommend that you use Easy-CD creator,
which creates an ISO 9660 file system.
SB16-A0U-ANGAFLK-ENG.indd 6
11. 03. 31
1:59
Getting Started
7
Front panel
f
1
g
Getting Started
a
b
c
d
e
e
h
i
a Antenna
b PORT.IN
The player can be used to play the music from
many types of portable player.
FUNCTION switch
Changes the function.
c VOL (-/+)
Volume control.
d Disc Door
e Speaker
f Handle
g TUNING (-/+) DIAL
h REPEAT
You can enjoy the music repeatedly or
randomly.
PROG.
Plays back tracks in any order
USB/CD
Selects the USB/ CD function.
d/M Starts or pauses playback.
Z Stop
C/V Skip/ search
ws Search for a folder of MP3/ WMA files.
When a CD/ USB containing MP3/ WMA files in
several folders is being played, press it to select
the folder you want to play.
USB Connector
USB REC
Recording.
i DISPLAY WINDOW
(Only CD and USB)
SB16-A0U-ANGAFLK-ENG.indd 7
11. 03. 31
1:59
8
Connecting
Power Source
, Note
y Unplug the AC power cord from the wall
outlet if you do not to use for an extended
period of time.
y To avoid damage from possible battery
leakage, remove the batteries if you do not
plan to use the unit for an extended period
of time.
y When the batteries are weak, replace all the
batteries with new ones.
2
Connecting
y While the AC power cord connect to the
wall outlet, the batteries are not worn out.
y Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such
as sunshine, fire or the like.
Battery Installation
1. Press and open the battery cover.
2. Put six “C” (R14) batteries (not supplied) into
the compartment making sure the 2 and 3
should be correctly positioned.
3. Replace the battery cover.
AC Power Cord Connection
1. Connect one end of the AC power cord
(included) to the AC IN socket.
2. Plug the other end into the wall outlet.
SB16-A0U-ANGAFLK-ENG.indd 8
11. 03. 31
1:59
Connecting
Other Equipment
Connection
9
USB device requirement
y Devices which require additional program
installation connected to a computer, are not
supported.
y Do not extract the USB device while in operation.
USB Connection
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
y For a large capacity USB, it may take longer than
a few minute to be searched.
y To prevent data loss, back up all data.
y Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
y This unit is not supported when the total
number of files is 1 000 or more.
2
Connecting
y If you use a USB extension cable or USB hub, the
USB device is not recognized.
y External HDD, Card readers, Locked devices, or
hard type usb devices are not supported.
y USB port of the unit cannot be connected to PC.
The unit can not be used as a storage device.
PORT. IN Connection
Removing the USB Device
from the unit
Connect a output (earphone or line out) of portable
device (MP3 or PMP etc) to the AUDIO input
connector.
1. Choose a different function mode or press
Z twice in a row.
2. Remove the USB device from the unit.
Compatible USB Devices
y MP3 Player : Flash type MP3 player.
y USB Flash Drive : Devices that support USB
2.0 or USB 1.1.
y The USB function of this unit does not support
some USB devices.
SB16-A0U-ANGAFLK-ENG.indd 9
y A warning that excessive sound pressure from
earphones and headphones can cause hearing
loss.
11. 03. 31
1:59
10
System Setting
Basic Operations
Other Operations
1. Insert the disc (Label facing up.)
or connect the USB device to the USB port.
Programmed Playback
2. Select the CD or USB function by pressing
USB /CD.
The program function enables you to store your
favourite files from any disc or USB device.
3. Select a file (or track) you want to play by
pressing C/V
A program can contain 20 tracks.
1. Insert a CD or USB and wait for it to be order.
2. Press PROG. in stop status.
To
Do this
3. Press C or V to select a track.
Stop
Press Z.
4. Press PROG. again to save and select a next
track.
3
Playback
Press d/M.
5. Press d/M to play the programmed music files.
System Setting
Pause
Press d/M
6. To clear your selection, press Z twice.
Skipping to
the next/
previous
track/ file
During playback, press
C or V to go to the next
track/ file or to return to the
beginning of the current track/
file. Press C twice briefly to
step back to the previous track/
file.
Searching
for a section
within a track
Press and hold C or V
during playback and release it at
the point you want to listen to.
Playing
repeatedly or
randomly
Press REPEAT repeatedly, the
display changes in the following
order, REPEAT 1 -> REPEAT ALL ->
RANDOM -> OFF.
SB16-A0U-ANGAFLK-ENG.indd 10
, Note
The programs are also cleared when the disc
or USB device is removed, the unit is switched
to power off or the function is switched to
others.
11. 03. 31
1:59
System Setting
Listening to music from your
portable player
The unit can be used to play the music from many
types of portable player.
1. Connect the portable player to the
PORT. IN (PORTABLE IN) connector on the unit.
2. Select the PORTABLE function by pressing
FUNCTION switch.
3. Turn on the portable player and start it playing.
11
Radio Operations
Listening to the radio
1. Select the radio function by pressing
FUNCTION switch.
2. Select either FM or AM
3. Select the radio station by using
TUNING dial
To turn off the radio
Set FUNCTION switch to CD or PORT. IN, USB, to
turn off your unit.
3
System Setting
SB16-A0U-ANGAFLK-ENG.indd 11
11. 03. 31
1:59
12
System Setting
Recording to USB
You can record a various sound source to USB.
1. Connect the USB device to the unit.
2. Select a function in which you want to record
playback a sound source first. (Only CD)
One track recording - You can record to USB
after playing the file you want.
All tracks recording - You can record to USB
after stopping.
Program list recording - After moving to the
programmed list and you can record it to USB.
3
3. Start the recording by pressing USB REC.
4. To stop recording, press Z.
System Setting
To select recording bit rate
and speed
, Note
y You can check the recording percentage
rate for the USB record on the display
window during the recording.
y During recording MP3/ WMA, there is no
sound.
y When you stop recording during playback,
the file that has been recorded at that time
will be stored. (AUDIO CD Only)
y Do not remove the USB device or turn off
the unit during USB recording.
If not, an incomplete file may be made and
not deleted on PC.
y If USB recording does not work, messages
like “NO USB”, “ERR”, “FUL” will be displayed
on the display window.
y Multi card reader device or External HDD
can not be used for USB recording.
1. Press USB REC for longer than 3 seconds.
y When you stop recording during playback,
the file will not be stored. (MP3/ WMA)
2. Use C or V to select the bit rate.
y You may not store more than 999 files.
3. Press USB REC again to select the recording
speed.
y It’ll be stored as follows
4. Use C or V to select a desired recording
speed.
X1 SPEED (R 1)
- You can listen to music while recording it.
AUDIO CD
MP3/ WMA
X2 SPEED (R 2)
- You can just record the music file.
5. Press USB REC to finish the setting.
, Note
On radio or portable mode, you cannot set the
recording speed.
SB16-A0U-ANGAFLK-ENG.indd 12
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
11. 03. 31
1:59
Operating
Maintenance
13
Notes on Discs
Handling Discs
Handling the Unit
Never stick paper or tape on the disc.
When shipping the unit
Storing Discs
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Keeping the exterior surfaces clean
y Do not use volatile liquids such as insecticide
spray near the unit.
y Wiping with strong pressure may damage the
surface.
Cleaning Discs
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
y Do not leave rubber or plastic products in
contact with the unit for a long period of time.
4
Cleaning the unit
Operating
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
SB16-A0U-ANGAFLK-ENG.indd 13
11. 03. 31
1:59
14
Troubleshooting
Troubleshooting
PROBLEM
No Power.
General
No sound.
CD
RADIO
The unit does
not start
playback.
CAUSE
CORRECTION
y The power cord is not plugged in.
y Plug in the power cord.
y The batteries are not remaining.
y Change the batteries with a
new ones.
y Check whether you select right
function.
y Press FUNCTION switch and
check the selected function.
y An unplayable disc is inserted.
y Insert a playable disc.
y No disc is inserted.
y Insert a disc.
y The disc is dirty.
y Clean the disc.
y The disc is inserted upside down.
y Place the disc with the
label or printed side facing
upwards.
No sound.
y The function is not selected to the y Select the function to the
Radio.
Radio.
Some noise
occurs.
y There are electronic devices near
the player.
y Set the player far from the
devices.
5
Troubleshooting
SB16-A0U-ANGAFLK-ENG.indd 14
11. 03. 31
1:59
Appendix
15
Specifications
General
Power supply
Refer to main label.
Power consumption
Refer to main label.
Net Weight
1.6 kg
External dimensions (W x H x D)
(303 x 121 x 240) mm
Operating conditions Temperature
5 °C to 40 °C,
Operation status: Horizontal
Operating humidity
5 % to 90 %
Tuner FM/AM
FM Tuning Range
88 to 108 MHz
AM Tuning Range
530 to 1 620 kHz
Amplifier
Output Power
0.5 W x 2
USB
Bus Power Supply (USB)
DC 5 V 0 500 mA
USB Version
USB 2.0 or USB 1.1
CD
100 MHz to 18 kHz
Signal-to-noise ratio
61 dB
Dynamic range
56 dB
6
Appendix
Frequency Response
Speakers
Type
1 Way Speaker
Impedance
8Ω
Rated Input Power
1W
Max. Input Power
2W
y Design and specifications are subject to change without notice.
SB16-A0U-ANGAFLK-ENG.indd 15
11. 03. 31
1:59
SB16-A0U-ANGAFLK-ENG.indd 16
11. 03. 31
1:59
Download PDF