LG | LP-K3060CL | LG LP-K3060CL Owner’s Manual

Package
Air
Conditioner
OWNER'S
MANUAL
Before
manual
using your air conditioner please read this
carefully and keep it for future reference.
MODEL: LP-K2060CL/CA
LP-K3060CL/CA
LP-K3020CL/CA
LP-K4020CL/CA
Prior to
installation, this air-conditioning unit
must be submitted for
service which
Norm).
approval by the utility
provides electricity (EN 60555-3
Safety precautions
Safety Precautions
SafetyPrcuions
to the
other
user or
people and property damage,
the
instructions must be followed.
Incorrect
operation
damage,
the seriousness is classified
Operating Instructions
Features and
due to
ignoring
of instruction will
cause
by the following
harm
or
indications.
WARNING
WARNING
Specifications ....4
This
Indoor Unit Controls and
symbol
indicates the
possibility
of death
or
serious
possibility
of
or
damage
injury.
Indicators ..............................5
CAUTION
CAUTION
Name and Function-Remote
Control ...................................6
This
symbol indicates
properties only.
operation.......8
Care and Maintenance
the
Installation
Care and Maintenance .......18
Operation Tips
....................18
injury
to
precautions
WARNING
WARNING
Do not
Before You
install, remove and re-install the unit by yourself.
Improper installation will cause water leakage, electrical shock, or
fire. Please consult authorized dealer or specialist for the installation
Call For Service ...............19
work.
Troubleshooting tips
WARNING
WARNING
Do not
damage
or use an
Do not
unspecified
operate with
wet hand.
power cord.
?
It will
cause
electrical shock
Do not insert
or
fire.
anything into the
?
air inlet/air
?
Since the fan rotates at
When
cause
electrical shock.
Do not expose the skin directly to cool air
long periods of time.
an
injury
or
high speed,
damage the unit.
abnormality (smell
of
this may
If the unit continues to
burning, etc)
operate in
an
This could
?
Repair
occurs, stop the air conditioner, and
disconnect the power plug or turn off the
circuit breaker.
?
It will
for
outlet.
cause an
Troubleshtingp
prevent injury
following
Caution .................................3
Air conditioner
OperatingIsuco
CarendMitc
To
................................2
Warning
or
damage
your health.
relocation should not be done
by
the customer.
abnormal
?
condition, it may cause fire, damage, etc. In
this case, consult your dealer.
If this is done
electric
water
2
incorrectly, it may cause a fire,
shock, injury by dropping of the unit,
leakage,
etc. Consult your dealer.
CAUTION
?
Contact the authorized Service technician for
?
Contact the installer for installation of this unit.
?
The air conditioner is not intended for
?
The
?
?
maintenance of this unit.
repair or
use by young children or infirm persons without supervision.
appliance is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure that they do not play with the appliance.
If the supply flexible cord is damaged, it must be replaced by the manufacturer or the manufacturer's
service agent or similary qualified person in order to avoid hazard.
CAUTION
CAUTION
When the air filter is to be
Do not clean the air
Ventilate well when used
removed, do not touch the
metal parts of the indoor unit.
conditioner with water.
together with
?
?
It may cause an injury.
Should be disconnected from
?
supply
When the unit is to be
cleaned, switch off,
Do not
and turn
off the circuit breaker.
?
It may
cause an
electric
Do not
put
a
pet
or
plant where it will
?
exposed
Do not leave
an
on
stand which is
shock,
?
This could
injure
the
pet
or
?
plant.
apply
shortage
may
occur.
house
be
An oxygen
installation
damaged.
to direct air flow.
burning.
or
Water may enter the unit and
degrade the insulation. It may
cause an electric shock.
stove, etc.
a
Do not
insecticide
flammable spray.
is
put
exposed
a
stove, etc. where
The unit may drop or fall down
and cause an injury.
Do not
to direct air flow.
not
?Itmaycauseafireor
?
It may affect combustion.
step
on
the
indoor/outdoor unit and do
?
deformation of the cabinet.
put anything
It may
on
it.
injury through
falling down.
cause an
dropping
or
Do not insert your finger or
stick etc. into the air inlet
When the unit is not
Do not open the air inlet
be used for
during operation.
grille.
off the circuit breaker.
?
It will
Do not
?
injury, electric
high voltage.
cause an
shock
by
the
use
Do not
use
for
?
a
going to
long time, turn
If not, dirt may collect and
fire.
cause a
It may
shock
cause an injury, electric
by the high voltage.
Do not operate for a long time in high
humidity, e.g. leaving a door or window open.
special purposes.
this air conditioner to preserve
precision devices, food, animal, plants, and
objects.
It may cause deterioration of quality, etc.
?
grille
?
In the
with
art
3
cooling mode, if it is operated in a room
high humidity (80%RH or more) for a long
time,
water condensed in the air conditioner may
drop
and may wet and
spoil furniture,
etc.
SafetyPrcuionsOpgICdMTblh
Features and
SafetyPrcuions
OperatingIsuco
CarendMitc
Troubleshtingp
Specifications
Features
for
cooling
8
Anti-Bacteria filter
9
3 minutes
1
Design
2
Super
3
Micom control
10 Jet Cool operation
4
Whisper quiet operation
11
5
Wireless remote control
12 Auto restart
6
2
13 Plasma Air Purifying system
7
Removable air filter
energy
efficiency
cooling speeds
delay
circuit
Energy saving
(CA MODEL)
Specifications
Air Outlet Vent
Remote
Signal
Receptor
Air Intake Vent
(Rear)
Air Intake Vent
Air Outlet
Vent
4
Indoor Unit Controls and Indicators
The remote control transmits the
signals
to the
system.
Features of the Remote Control- Door Closed
8
9
10
15
16
14
18
CA MODEL
A/CL
R00M
TEMP.
SET
TEMP.
JET COOL
CA MODEL
On/Off
Mode
Fan
Temp.
Speed
Fan
Energy
Saving
Jet Cool
Air
Cleaning
A/CL
123
1
2
4
12
5
13
START/STOP BUTTON
Operation starts when this button is
pressed and stops when the button is
pressed again.
OPERATION MODE SELECTION
operation
Mode.
INDOOR FAN SPEED SELECTION
Used to select fan
speed
in two
JET COOL BUTTON
Used to start
stop the speed
cooling.(Speed cooling operates super
high
5
6
fan
or
speed
in
17
8
COOLING OPERATION LAMP
9
AUTO OPERATION LAMP
10
SOFT DRY OPERATION LAMP
11
JET COOL OPERATION LAMP
12
ENERGY SAVING OPERATION LAMP
13
OFF TIMER OPERATION LAMP
14
FAN OPERATION LAMP
15
cooling mode)
AUTO AIRFLOW OPERATION
LAMP(VERTICAL)
ENERGY SAVING BUTTON
16
ROOM TEMPERATURE SETTING
17
BUTTONS
Used to select the
7
7
steps-low,
high.
4
6
BUTTON
Used to select the
3
11
room
room
PLASMA AIR PURIFYING
BUTTON(CA
MODLE)
temperature.
18
FAN OPERATION BUTTON
Used to circulate
OUTDOOR UNIT OPERATION LAMP
air without
cooling.
5
AIR CLEANER OPERATION
MODEL)
LAMP(CA
SafetyPrcuionsOpgICdMTblh
Name and Function-Remote Control
SafetyPrcuions
Control
1
Signal Transmitter
Transmits the signals
?
1
2
3
Operation Display
?
air
4
5
Plasma Air
Fan
Purifying Button(CA MODEL)
Operation Button(CL MODEL)
Auto Airflow Direction Control Button
?
6
The vertical louvers
11
6
12
7
7
Jet Cool
swing
Speed Selection Button
speed in two steps
[Low, High]
To select the desired fan
ON Button
Cooling
9
Auto Mode
10
Soft
11
Energy Saving Operation Button
Operation Button
Dry Operation Button
Power ON/OFF Button
?
Operation will start when this button is
pressed, and stop when the button is pressed
again.
13 Temperature Setting
Wireless Remote Control Puts all functions at your
Aim at the
?
The remote control
?
?
?
right.
Operation Button
8
12
?
left and
Indoor Fan
?
13
Handling
mode is
If you select "0:00" the off Timer function will
be canceled.
9
10
pressed, the
following process.
(1, 2, 3, 4, 5, 6, 7 hours)
in the
Timer set
A/CL
345
of the Remote Control
Each time the button is
changed
8
Troubleshtingp
package
Timer Set Button
2
OperatingIsuco
CarendMitc
to the
conditioner
Buttons
fingertips
the remote control
signal receptor on the package air conditioner when operating.
signal can be received at a distance of up to about 7meters.
Be sure that there are no obstructions between the remote control and the signal receptor.
Do not drop or throw the remote control.
Do not place the remote control in a location exposed to direct sunlight, or next to a heating unit,
other heat
source.
6
or
Remote Control
Preparation
How to mount onto
1
Use the
screws
to
secure
a
wall
the holder to the wall
or
attach the holder side of indoor
unit.
2
To insert the remote control to the holder.
Insert
Pull
How to insert batteries
Remove the
cover
?
from the
?
Slide the
the
cover
according
as
to
dry
direction.
arrow
Do not
use
rechargeable
batteries such batteries
back of the remote controller.
different from standard
cells in
shape,
dimensions, and
performance.
Insert two batteries.
?
Be
sure
that the
directions
?
Be
sure
are
(+)
and
(-)
?
correct.
Change
properly
Re-attach the
Slide the
if the remote
control does not work
are new.
?
the batteries with
a new one
that both batteries
cover
after
extended
cover.
into back
position.
7
using for an
length of time.
SafetyPrcuionsOpgICdMTblh
Air conditioner
SafetyPrcuions
How to
1
?
Each time the
shifted in the
Mode
OperatingIsuco
CarendMitc
Troubleshtingp
the
use
Operation
arrow
operation
Operation
Mode Selection Button is
Operation
Mode is
Fan
How to
use
Each time the Fan
Mode
the
Speed
SET
TEMP.
Auto
Cooling Operation
?
pressed,
direction.
SET
TEMP.
2
Mode Button
the Fan
speed
SET
TEMP.
Soft
Operation
Dry Operation
speed Button
Button is
pressed,
the Fan
speed
is shifted in the
arrow
direction.
Fan
Speed
High
8
Low
Cooling Operation Mode
3
Press the
1
Start/Stop
Button.
On/Off
Select
2
Cooling Operation.Press the Operation
Operation Button on the remote controller.
Mode Selection Button. Press the
Cooling
Fan
Mode
Speed
A/CL
SET
TEMP.
Set the
3
The
temperature lower than the room temperature.
temperature can be set within a range of 16°C~30°Cby 1°C.
Temp.
4
Fan
When you finish the
To raise the
temperature
To lower the
temperature
SET
TEMP.
temperature setting.
After 4 seconds
5
Set the Fan
Mode
SET
R00M
TEMP.
TEMP.
Speed.
Fan
Speed
Low
High
Each time the Fan
Speed
9
Speed
Button is
mode is shifted in the
arrow
pressed,
direction.
the Fan
SafetyPrcuionsOpgICdMTblh
SafetyPrcuions
OperatingIsuco
CarendMitc
Soft
4
1
Dry Operation
Press the
Start/Stop
Button.
On/Off
2
Select Soft
Press the
Press the
Mode
Dry Operation.
Operation Mode Selection Button.
Soft Dry Operation Button on the
remote controller.
Fan
Speed
A/CL
SET
TEMP.
3
Set the
The
temperature lower than the room temperature.
temperature can be set within a range of 16°C~30°Cby 1°C.
Temp.
Fan
To raise the
temperature
To lower the
temperature
SET
TEMP.
During softy Dry Operation
Troubleshtingp
?
The indoor fan
Mode
speed
is
automatically
Fan
Speed
10
set to low and
can
be set fan
speed.
5
Jet Cool
1
Press the
Operation
Start/Stop
Button.
On/Off
Press the Jet Cool button to
2
high
super
fan
speed
on
operate the speed cooling mode and the unit will operate in
cooling
mode.
Energy
Saving
Jet Cool
SET
TEMP.
JET COOL
To cancel the Jet Cool
3
mode, press the Jet Cool button again or the fan speed button or the
temperature setting button and the unit will operate in high fan speed on cooling mode.
room
JET COOL
or
or
NOTE:
During the JET COOL function at any moment, the A/C starts
extremely high speed setting the room temp. automatically to
cool the
to blow the cool air at
18°C. It is
especially
used to
temp. in the shortest time in a hot summer.
In heat pump mode or neuro fuzzy mode however, the JET COOL function is not available.
In order to return to the normal cooling mode from the JET COOL mode, you just press
either the operation mode selection button, airflow volume selection or temp. setting button
or
room
the JET COOL button
again.
11
SafetyPrcuionsOpgICdMTblh
SafetyPrcuions
OperatingIsuco
CarendMitc
Troubleshtingp
Energy Saving
6
1
Press the
Start/Stop
Mode
Button.
On/Off
2
Select
You
Energy Saving
can
Jet Cool
mode.
select this function
during
the
operation
of
Cooling/Auto/Soft Dry.
Energy
Saving
SET
TEMP.
To cancel the
3
operate
Jet Cool
on
Energy Saving mode, press
Cooling/Auto/Soft Dry mode.
the
Energy Saving
button
again
and the unit will
Energy
Saving
SET
TEMP.
Auto restart
In
case
the power
function to
In
off
case
comes on
again
after
a
power failure, Auto Restarting Operation is the
to the previous operating conditions.
operate procedures automatically
the air conditioner does not receive any
after 7 hours.
automatically
12
signal
from the remote
control, it will
turn
Auto
7
Operation
Press the
1
Start/Stop
Mode
Button.
On/Off
Select Auto
2
Operation.
Operation Mode Selection Button.
Auto Operation Button on the remote controller.
Press the
Press
Mode
Fan
Speed
A/CL
SET
TEMP.
Set the
3
The
temperature upper than the room temperature.
temperature can be set within a range of -2~2°Cby
Temp.
1 level.
Fan
SET
TEMP.
Cold
(This
Cool
Proper
Warm
Hot
indication will be shifted to the initial Auto Mode
To raise the
To lower the
Display
state after 4
seconds.)
temperature (When you feel too cool or cold)
temperature (When you feel too warm or hot)
During Auto Operation
?
It is
impossible to switch the
by fuzzy rule.
indoor fan
speed
conditioner
13
because of
being already
set to the best
SafetyPrcuionsOpgICdMTblh
SafetyPrcuions
OperatingIsuco
CarendMitc
Fan
8
Press the
1
Mode
Start/Stop
(CL MODEL)
2
Button.
On/Off
Press Fan
Operation
Button.
Fan
SET
TEMP.
Set the Fan
3
Mode
Speed.
Fan
Speed
Low
High
Each time the Fan
Fan
Speed
Speed
Button is
mode is shifted in the
pressed,
arrow
the
direction.
Airflow Direction Procedure
9
Press the
1
Start/Stop
Button.
2
Press the Auto
louvers will
Swing Button and
swing left and right.
then
Press the Airflow Direction
Control Button
On/Off
again
to set
the Vertical louver at the
desired airflow direction.
(Operation
Troubleshtingp
Operation
and
will start when the button is
pressed,
The vertical louver
stop when the button is pressed again.)
swing
left and
right.
Note
Always
use
the remote control to
direction louver
by
hand could
adjust the right/left airflow direction, manually moving
change the air conditioner.
the vertical airflow
Vertical Airflow Direction Control
Adjust the
vertical airflow direction
manually by moving
14
the horizontal louvers with hand.
Plasma Air
10
Air
1
Purifying Operation
(CA MODEL)
Purifying Operation only
Press the Plasma Air
1
Procedure
Purifying Operation Start/Stop
Button.
Air
Temp.
Cleaning
A/CL
A/CL
(Operation
will start when the button is
pressed,
and
stop when the button is pressed again.)
Select Fan
2
The
Mode
speed.
display shows
low fan
speed
at the initial condition.
Fan
Speed
A/CL
SET
TEMP.
High
?
You
dry
2
can
or
Air
A/CL
SET
TEMP.
Low
operate the Plasma Air Purifying under the unit operation of cooling, heating, soft
Auto mode.
Purifying Operation
1. Press the
Start/Stop
2. Select the desired
Cooling or any other Operateion.
Button.
Operation
3. Press the Plasma Air
4. Set the fan
with
Mode.
Purifying Operation
speed.
15
ON/OFF Button.
SafetyPrcuionsOpgICdMTblh
SafetyPrcuions
OperatingIsuco
CarendMitc
OFF Timer Setting
11
1
Press the
Start/Stop
Procedure(OFF TIMER Setting,
Button.
On/Off
Press the Timer Button.
2
A/CL
If you press the
?
?
3
If you select
'
button, the selected off timer is displayed
as
When you finish the Off Timer
setting,
the Timer indicator
lights
During off-timer operation
displayed.
off.
After 4
seconds
SET
TEMP.
4
follows;
', the Off Timer function will be cancelled.
After 4
seconds
Troubleshtingp
or
if you press the Timer
16
R00M
TEMP.
Button, the
rest time will be
CANCEL)
Child Lock
12
1
Operation
Procedure
Press the low and
high temperature setting
respond with beep.
The unit will
Temp.
buttons
simultaneously
for 3 seconds.
Fan
R00M
TEMP.
SET
TEMP.
After 3 seconds,
it will shifted.
2
During
Child Lock
After 3 seconds,
it will shifted.
Operation
Whenever you press any Button on Display Panel, it will
", which means Display panel is Locked.
immediately display
"
All the Button
on
But the Button
3
For
releasing
Temp.
Fan
on
the indoor unit
Display panel
will not work.
the remote controller will work.
child lock
Operation.
Press the low and
high temperature setting buttons simultaneously
again.
rospond with beep, Child Lock Operation will removed.
for 3 seconds
The unit will
R00M
TEMP.
SET
TEMP.
After pressing
the buttons
it will shifted immediately
After 3 seconds,
it will shifted.
17
SafetyPrcuionsOpgICdMTblh
Care and Maintenance
CAUTION: Before
SafetyPrcuions
During the
Remove the Air Filter.
Take hold of the tab and
remove the filter.
Clean.
To remove the dust
?
Cleaning of the air cleaner.
Recommended about once every three months
Cleaning
?
?
Wipe
soft
?
dry
Dip the air cleaner into the water mixed with
detergent, for 20~30minutes, and dry in the shade.
Re-insert the air cleaner to the original position.
original position.
of the air conditioner
Don't wash with water.
a
pull slightly forward to
Clean.
adhering to the filters,
?
with
Remove the Air Cleaner.
Take hold of the tab and
remove the air cleaner.
to
either use a
cleaner, or wash them in water and dry in the
Never
?
any of the
Water hotter than 40°C.
Could
cloth.
use
cause
followings.
Volatile substances.
?
deformation
Could
and/or discoloration.
damage the surfaces
of the air conditioner.
When the air conditioner is not going to be used for a long time.
At the end of the
At the start of the
season
Operate the air conditioner at the following
settings for 2 to 3 hours.
Type of operation : Cooling.
Temperature setting : 30°C.
This will dry out the internal mechanisms.
Clean the air
season
filters, re-insert, then operate
the air conditioner.
?
?
Remove the batteries from the Remote Control.
Be
sure
that
nothing
obstructs the air outlet
and intake vents.
Turn off the circuit breaker.
CAUTION
CAUTION
Turn off the circuit breaker when the air conditioner
is not going to be used for a long time.
Dirt may collect and may cause a fire.
Operation Tips
Do not overcool the
Troubleshtingp
pull slightly forward
shade.
Re-insert the filter to the
?
system.
season
Cleaning of the air filters.
Recommended about once every two weeks
vacunm
OperatingIsuco
CarendMitc
turn off the main power to the
performing any maintenance,
room.
This is not
wastes
good for your
electricity.
health and
Keep
blinds
or
curtains closed.
Do not let direct sunshine enter the
room
when the air conditioner is in
Make
sure
Avoid
much
the
that the doors and
are
shut
room.
Clean the air filter
tight.
opening doors and windows as
possible to keep the cool air in
as
Blockages
regularly.
in the air filter reduce the
airflow and lower
dehumidifying
once
room
temperature uniform.
Adjust the vertical
direction to
and horizontal airflow
ensure a
temperature in the
operation.
windows
Keep the
cooling
and
effects. Clean at least
every two weeks.
18
Ventilate the
room
Since windows
are
uniform
room.
occasionally.
kept closed,
it is
a
idea to open them and ventilate
the room now and then.
good
Before you call for service...
Troubleshooting Tips! Save time and money!
?
Check the
following points
contact your dealer
or
before
requesting repairs
Case
Does not
or
service.... If the fault
See page
Explanation
operate.
persists, please
service center.
?
Have you made
?
Has the fuse blown
a
mistake in timer
operation?
has the circuit breaker been
or
tripped?
?
?
?
Is the power Switch at Off?
Is the unit at the starting of
If yes, wait for
The
room
has
a
?
peculiar
It
finishing
Check that this is not
a
walls, carpet, furniture,
odor.
that condensation is
seems
leaking
?
Condensation
occurs
conditioner cools the
from the air
-
Heating Operation?
If yes, Hot-start is activating.
Is the unit in the Deicing?
the
Deicing.
damp smell
or
exuded
cloth items in the
by the
-
room.
when the airflow from the air
warm room
air.
-
conditioner.
Air conditioner does not
operate
for about 3 minutes
?
This is the Protection device of the air conditioner
?
Wait about three minutes and
operation
If the airflow
temperature become
?
when restarted.
warm, it will
order to
it is
Does not cool
or
heat
?
begins
before its
cause an
undesired
cooling
prevent this, the airflow will
not
will
.
begin.
effect. In
begin
until
sufficiently warm.
Is the air filter
dirty?
See air filter
cleaning
18
instructions.
effectively.
?
The
may have been very hot when the room
air conditioner was first turned on. Allow time for it
room
-
to cool down.
?
Has the
?
Are the indoor unit's air inlet
temperature been
set
or
incorrectly?
outlet vents
-
obstructed?
The air conditioner
is
operation
?
For
a
noise that sounds like water
-This is the sound of freon
noisy.
flowing
flowing.
inside the air
conditioner unit.
?
For
a
noise that sounds like the
compressed
-
air
into
atmosphere.
dehumidifying water being
processed inside the air conditioning unit.
releasing
-This is the sound of the
Remote controller
faint,
or no
display
display
at all.
is
?
Are the batteries
?
Are the batteries inserted in the
depleted?
opposite (+)
and
(-)
7
directions?
NOTE
WATER RESISTANT: The outdoor side of this
appliance
is WATER RESISTANT.
The indoor side is not water resistant and should not be
19
exposed
to
excess
water.
SafetyPrcuionsOpgICdMTblh
P/No.: 3828A30020P
Printed in Korea
Download PDF