LG VCX8806M Owner’s Manual

LG VCX8806M Owner’s Manual
DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
VCX8806M
PAL
Before
adjusting this product,
booklet carefully and
connecting, operating
please read
completely.
this instruction
or
CAUTION
To reduce the risk of electric
Warning:
shock, do
of this
not remove the cover or back
product.
There
are no user-serv-
iceable parts inside. Refer servicing to
qualified service personnel.
Warning:
To reduce the risk of fire
or
electric shock, do not expose this
product
to
dripping
splashing water,
not place objects
or
moisture. Do
filled with water such
rain,
or
as
vases,
on
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
IN CASE OF 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS ECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE 'STANDARD
DEFINITION' OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH
THIS MODEL 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
the
product.
SERIAL NUMBER:
You can find the serial number on the back of the unit.
This number is unique to this unit and not available to
others. You should record requested information here
and retain this guide as a permanent record of your
purchase.
Model No.
Serial No.
______________________________
______________________________
Date of Purchase_________________________
Warning: This digital video disc player
employs a laser system. Use of controls,
adjustments, or the performance of
procedures other than those specified
herein may result in hazardous radiation
exposure.
Warning:
To
prevent direct exposure
Never stare
laser beam.
directly
into the
Complete versatility
or VHS Tapes.
to
?
Watch
recording
?
Remote controls both DVD and VCR decks.
?
Records from DVD to VHS
with Macrovision).
?
Hi-Fi Stereo VCR.
a
Notes
on
2
TV show to the VCR.
(unless
notes on
DVD is copy
protected
controlling
uses one
set of controls to
DVD and VCR. The
this
operate both
following buttons
successfully controlling each part.
or
2.
are
helpful
front
panel
to turn
on
on
the remote control
this unit.
DVD Button
Press DVD button
on
the remote control when
you want to control the DVD.
The DVD indicator will light on the front
display
3.
panel
to show that the DVD is selected.
VCR Button
Press the VCR button
on
the remote control
when you want to control the VCR.
The VCR indicator will light on the front
display
4.
in
POWER Button
Press the POWER button
Copyrights:
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
a
audio CDs
unit
1.
This product is manufactured to comply
with the radio interference requirements
of EEC DIRECTIVE 89/336/EEC,
93/68/EEC and 73/23/EEC.
DVD while
Important
This unit
Caution: Do not install this product in a
confined space such as a book case or
similar unit.
play DVD, DivX, VCDs,
?
to
laser beam, do not open the enclosure.
Visible laser radiation when open.
Warning:
Features:
panel
to show that the VCR is selected.
DVD/VCR Button
Press the DVD/VCR button
toggle
on
the front
panel
control between the DVD and the VCR.
to
Contents
PlayingaDVDorVideoCD...............26-28
Introduction...................4
SymbolUsedinthisManual...............4
AbouttheSymbolDisplay..............4
NotesonDiscs..........................4
HandlingDiscs........................4
StoringDiscs.........................4
CleaningDiscs........................4
TypesofPlayableDiscs...................5
Regionalcode..........................5
Disc-relatedterms.......................6
FrontPanel.............................7
DisplayWindow.........................7
RemoteControl.........................8
RearPanel.............................9
GeneralFeatures.......................26
MovingtoanotherTITLE...............26
.26
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................26
.26
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.27
SlowMotion.........................27
Random............................27
.
.
.
.
.
.
.
.
.
.
.
.
RepeatA-B..........................27
Repeat.............................27
3DSurround.........................27
TimeSearch.........................27
Zoom..............................28
MarkerSearch.......................28
SpecialDVDFeatures...................28
TitleMenu..........................28
DiscMenu..........................28
InstallationandSetup
.
.
.
.
.
.
.
.
.10
.
CameraAngle.......................28
.28
ChangingtheAudioLanguage
.
Connecting to a TV & Decoder (or Satellite) .10
.11
Connecting to Optional Equipment
.12-16
BeforeOperation-VCRpart.
.12
Tuning in a video channel on your TV
.12
Using your VCR for the very first time
.13
SettingtheclockManually.
Tosetthecoloursystem..............13
.14
Howtousingthemainmenu.
.14
Tuning in TV Stations Automatically
.15
TuninginTVStationsManually.
.16
Changing the order of TV Stations
DeletingTVstations..................16
.17-21
BeforeOperation-DVDpart.
On-ScreenDisplay......................17
InitialSettings.......................18-21
GeneralOperation....................18
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
LANGUAGE.........................18
MenuLanguage....................18
DiscAudio/Subtitle/Menu.
.18
DISPLAY...........................19
.
.
.
.
.
.
.
.
.
.
TVAspect.........................19
DisplayMode......................19
ProgressiveScan...................19
TVOutputSelect....................19
AUDIO.............................20
.20
DolbyDigital/DTS/MPEG.
.20
SampleFreq.(Frequency)
.20
DynamicRangeControl(DRC).
Vocal.............................20
OTHERS...........................21
PBC.............................21
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AutoPlay..........................21
DivX(R)VOD.......................21
LOCK(ParentalControl)................22
Rating............................22
.22
Password(SecurityCode).
CountryCode......................22
.
.
.
.
.
.
.
.
.
.
.
Operation....................23
Playingatape.......................23-25
.23
CM(CommercialMessage)Skip
OPR (Optimum Picture Response)
.23
.24
InstantTimerRecording(ITR).
Timer recording using On Screen Display
.25
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles............................28
.29
PlayinganAudioCDorMP3/WMADisc
.30
AudioCDandMP3/WMADiscFeatures
Pause..............................30
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTrack................30
RepeatTrack/All/Off...................30
Search.............................30
Random............................30
RepeatA-B..........................30
3DSurround.........................30
ProgrammedPlayback.....................31
.31
RepeatProgrammedTracks.
.31
ErasingaTrackfromProgramList
.31
Erasing the Complete Program List
ViewingaJPEGDisc......................32
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow..........................32
StillPicture..........................32
MovingtoanotherFile.................32
Zoom..............................32
Torotatepicture......................32
To listen to MP3/WMA music watching picture
.32
.33
PlayingaDVDVRformatDisc.
.
.
.
.
.
.
.
.
.
.
.
.
.
MaintenanceandService.................33
PlayingaDivXMovieDisc................34
Additional Features-VCR part
.
.
.
.
.
.
.
.
.
.35-36
.
OnScreenDisplay....................35
TapeCounterMemoryStop.............35
Lock(ChildLock).....................35
.35
VideoDoctor(Self-Diagnosis).
Hi-FiStereoSoundSystem.............36
.36
WideScreenCompatibility16:9
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Tosetthedecoder....................36
AdditionalFeatures.....................37
LastSceneMemory...................37
ScreenSaver........................37
VideoModeSetting...................37
Controlling other TVs with the remote control 37
CopyingfromDVDToVCR...............38
.38
Recording from another video recorder
.
.
.
.
Reference....................39
LanguageCodes.......................39
CountryCodes.........................39
Troubleshooting........................40
Specification..........................41
3
Introduction
About the
To
proper use of this product, please read this
owner's manual carefully and retain for future
Symbol Display
ensure
reference.
"
"
may appear on your TV display during
operation and indicates that the function explained in
this owner's manual is not available
This manual
provides
information
on
the
operation
on
that
specific
DVD video disc.
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
Notes
Symbol
Used in this Manual
on
Handling
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
of
Discs
Discs
Do not touch the
the
disc
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the disc.
electric shock.
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to
other material
cause
harm to the
damage.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
making
the task easier.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
A section whose title has
is
applicable only
symbol.
to the disc
of the
following symbols
represented by the
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
DivX
4
one
DivX Discs
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
vinyl
records.
Types
of
Playable
Discs
Regional
code
This DVD
player
is
designed and
playback of region
DVD
manufactured for
(8cm/12cmdisc)
encoded DVD software. This unit
only
Video CD
(VCD)
(8cm/12cmdisc)
DVD discs labeled "2"
Notes
Audio CD
?
(8cm/12cmdisc)
on
Regional
can
"ALL".
clearly
a
globe
visible
on
with
the
one or more
cover.
This number must match your DVD
code or the disc cannot play.
addition, this unit plays DivX file, DVD -R, DVD +R,
DVD -RW, DVD +RW, SVCD, and CD-R / CD-RW that
contains audio titles, MP3, WMA, and/or JPEG files.
play
2
Codes
Most DVD discs have
numbers in it
or
"2"
player's regional
In
This indicates
?
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears
on
the TV
screen.
product feature that is
capable of playing DVD-RW discs
recorded with Video Recording format.
a
Notes:
?
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
?
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
?
Do not
irregularly shaped CDs (e.g.,
heart-shaped or octagonal) since they may
(the
use
result in
malfunctions.
Notes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available
or
other functions may be added.
Manufactured under license from
Dolby
Laboratories. "Dolby", "Pro Logic", and the
double-D symbol are trademarks of Dolby
Laboratories.
DTS and DTS
Digital Out
Digital Theater Systems,
are
trademarks of
Inc.
5
Disc-related terms
PBC:
DVD±R/DVD±RW
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
DVD -R and DVD +R
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable
two standards for
media, meaning the DVD
erased and re-recorded.
4.38
are
Gigabytes
much. There
only
Single-sided
content
discs
can
can
hold
and double-sided discs hold twice
are no
dual
layer single
be
as
sided recordable
discs.
VCD
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
with
quality
CDs.
Title
(DVD video discs only)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a documentary describing how the film was made could be title 2,
and cast interviews could be title 3. Each title is
(Video CD)
along
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
assigned
easily.
a
reference number
enabling
stereo sound.
Chapter (DVD video discs only)
A chapter is a segment of a title such
MPEG
MPEG is
an
you to locate it
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
film
or one
interview in
a
series. Each
as a scene
chapter
in
a
is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
may not be recorded.
audio.
Scene
MP3
On
MP3 is
audio
popular compression format used for digital
files that yields very high near-CD quality.
a
WMA
Windows media audio file. A
developed by
Microsoft
type of coding / decoding
(VCD)
video CD with PBC
(playback control) functions,
moving pictures and still pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
Corp.
Track
JPEG
A distinct element of audiovisual
Joint Pictures
Expert Group.
file format that allows you to
on the number of colors.
JPEG is
save
compressed
images with no limit
a
information, such
the
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow
DivX
track of video
DivX is the
name
which is based
on
of
a
revolutionary
the
new
MPEG-4
standard for video.You will be able
movies
6
using
this DVD
new
player.
video codec
compression
to play DivX
as
of audio.
(with multiple angles)
one
and several tracks
Front Panel
POWER
Tape Eject
Switches the unit to ON
or
OFF.
Reverse
Go to
Skip/Scan, Rewind (
)
beginning of current chapter/track or to
Press and hold for two seconds for
Rewinds the
fast
a
PREVIOUS
reverse
chapter/track.
search.
tape.
Forward
Go to
Skip/Scan, Fast-Forward (
NEXT chapter/track.
Press and hold for two seconds for
Winds the
STOP
fast forward search.
tape forwards.
(
Disc
a
)
A
) Stops playback.
Tray
Insert
a
disc here.
PAUSE/STEP
Pause
press
( /
)
playback temporarily /
repeatedly for frame-by-frame playback.
DVD/VCR Selector
DVD OPEN/CLOSE
Opens
DVD to VCR
Copy
or
( G)
playback.
Display
)
closes the disc
Tape Compartment
tray.
Audio IN
Video IN Jack
Remote Sensor
Point the remote control here.
Channel
engaged
DVD+VCR is in timer
timer
Indicates
Indicates the
repeat
mode.
recording
Selectors.
Progressive
VCR
no
disc is
recording
is
engaged.
DVD to VHS copy is in progress.
disc is loaded in the DVD
deck and flashes when
or a
VCR deck is selected.
Adisc is loaded in the DVD deck.
a
is
recording
programmed.
A Cassette is in the VCR deck.
Scan is set to On mode.
when
Programme
Window
Child Lock is
(Lights
(L/R)
Jacks
Shows the current status of the unit.
PLAY
Starts
(
window
Display
Button
VCR Record
Indicates TV mode.
loaded.)
(See
Notes
on
page
24.)
DVD deck is selected.
DVD
VCR
P
REC
TV
Indicates total
playing time/elapsed
time/current time
7
Remote Control
OPEN/CLOSE
EJECT
Open or close the the disc tray.
POWER
Switch this unit ON or OFF.
DVD/VCR select button
Selects operational mode of
remote control.
-
-
AV
Select input
into tape.
0-9 numerical buttons
Select numbered items in a menu.
(see
-
VCR: Rewinds the
STOP
mode, for fast
forward.
TV VOL +/--:
tape during the
reverse
?
SETUP/ i
Access or
the
with PBC.
?
menu
Play
audio
language (DVD).
language.
REC/ITR
Record your
?
?
ENTER/OK
menu selection.
into
input sources
(Child Lock)
LOCK
Switch the Child Lock
on
tape.
and off.
TITLE
the title
Display
menu
of the disc if
available.
DISC MENU
of a DVD disc.
PROGRAM
Access or remove program menu.
MARKER
Mark any point during playback.
?
?
?
Repeat sequence.
recording speed of
SEARCH
Display MARKER SEARCH
?
tape.
RANDOM/CM SKIP
tracks in random order.
CM SKIP
?
-
an
?
-
the
video CD
?
-
Select the
a
ANGLE
Select DVD camera angle if available
ZOOM
Enlarge video image.
Select channel programme of VCR.
To adjust tracking.
To control vertical tremble during
picture still.
-
of
?
PR/TRK(+/-)
-
menu
SUBTITLE
Select a subtitle
FGDE(left/right/up/down)
A-B/LP
menu.
?
counter.
menu
setup
AUDIO
Select
DISPLAY
CLK/CNT
Access the On-Screen Display.
Shows you the current time or
Access
remove
Displays
?
Acknowledge
off TV sound.
RETURN
playback.
PLAY (G)
Starts playback.
STOP(A)?
Stops playback.
-
on or
TV's volume.
SKIP(./>)
Go to next chapter or track. Returns to
beginning of current chapter or track
or go to previous chapter or track.
PAUSE/STEP (
)
Pause playback temporarily / press
repeatedly for frame-by-frame
item in the
Adjusts
MUTE: Turns
search.
an
source.
TV PR +/--: Selects TV's channel.
picture
search and Advances the tape during
the STOP mode, fast forward picture
Select
recording
off the TV.
on or
TV AV: Selects the TV's
(m/M)
or
for
37)
p.
TV POWER: Turns
BACKWARD / FORWARD
DVD: Search backward
source
TV Control Buttons
TV/VCR
Switch between your TV's tuner
and the VCR's internal tuner.
-
Tape Eject.
?
-
-
menu.
CLEAR
Clear
track number
a
the
on
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
REPEAT
Repeat chapter, track, title, all.
-
?
Remote Control
Remote control
Operation
Point the remote control at the remote
sensor
8
new
batteries and
different
types of batteries such
alkaline,
etc.
as
installation
and
press the buttons.
Do not mix old and
battery
never
standard,
mix
AAA AAA
Detach the
battery
the remote
control, and insert
teries
(size AAA)
aligned correctly.
cover on
with
the
and
rear
of
two bat-
Rear Panel
VIDEO/AUDIO
Connect to
a
OUT(Left/Right) (DVD/VCR OUT)
TV with video and audio inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(DVD
EXCLUSIVE
Connect to
a
TV with Y Pb Pr
Pr)
inputs.
(Left/Right) (DVD EXCLUSIVE OUT)
an amplifier, receiver or stereo system.
AUDIO OUT
Connect the aerial
Connect to
this
Pb
OUT)
AERIAL
using
(Y
EURO AV2 DECODER
jack.
Connect to
pay-TV
decoder
or
another video recorder.
OPTICAL
(Digital audio out jack)
Connect to digital (optical) audio
equipment.
S-VIDEO OUT
Connect to
EURO AV1 AUDIO/VIDEO
Connect to your TV set
a
EXCLUSIVE
TV with S-Video
(VCR
or
(DVD
IN+OUT / DVD
OUT)
input.
OUT)
another video recorder.
(Digital audio out jack) (DVD EXCLUSIVE OUT)
to digital (coaxial) audio equipment.
COAXIAL
Connect
RF.OUT
(DVD/VCR OUT)
Connect to your TV using this jack.
AC Power Cord
Connect to
a
power
source.
Do not touch the inner
panel. Electrostatic
damage to the unit.
pins of the jacks on the rear
discharge may cause permanent
9
Installation and
Setup
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
Tips:
your TV and other equipment you
wish to connect, there are various ways you could
connect the unit.
1.
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
Connect the COMPONENT/ PROGRESSIVE SCAN
VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using the Y Pb Pr cable.
2.
Connect the Left and Right AUDIO OUT jacks of the
DVD Player to the audio left/right in jacks on the TV
using the audio cables.
Depending
on
For better sound reproduction, connect this unit's
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page
11.
Caution:
Make sure this unit is connected directly to the TV.
Set the TV to the correct video input channel.
Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Connecting to
(or Satellite)
a
TV & Decoder
Make one of the following
on the capabilities of your
connections, depending
existing equipment.
Output Select" option to
You must set the "TV
use
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
and SCART jacks. (See "TV Output Select" on
page
19.)
Basic connection
1.
2.
2.
Progressive to "On" on the setup menu for
progressive signal, see page 19.
Once the setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Set the
Scan to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that "DISC" is displayed on the display
window.
2) Press STOP and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack) or S-VIDEO
connection.
Rear of this unit
connection)
(RF)
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel
of this unit.
Connect the supplied RF antenna cable from the
RF.OUT jack on the rear panel of this unit to your
television's Antenna Input.
Component
2.
exclusive out
(AV)
Rear of TV
AERIAL
DVD exclusive out connection
1.
(DVD
Connect the EURO AV1 AUDIO/VIDEO on the
rear panel of this unit to the SCART input socket
on the TV using a SCART lead.
Some TV broadcasters transmit encoded television
signals which you can only see with a purchased
or rented decoder. You can connect such a
decoder (descrambler) to this unit.
Basic connection
1.
Notes:
Video
(Color Stream )
VIDEO
INPUT
COMPONENT VIDEO INPUT/
PROGRESSIVE SCAN
Pr
Pb
Y
AUDIO INPUT
L
SCART INPUT
S-
UT
R
connection
Connect the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks on the DVD Player to
the corresponding in jacks on the TV using the
Y Pb Pr cable.
Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on
the TV using the audio cables.
Decoder
(or Satellite)
S-Video connection
1.
2.
Connect the S-VIDEO OUT jack on this unit to the
S-Video input jack on the TV using the S-Video
cable.
Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on
the TV using the audio cables.
Progressive
Scan
(ColorStream Pro)
connection
If your television is a high-definition or "digital ready"
television, you may take advantage of the DVD
Player's progressive scan output for the highest video
resolution possible.
10
Rear of this unit
(Basic connection)
Note:
If the TV has an S-video input, connect the DVD player
with the S-video cable. When using an S-video cable, do
not connect the yellow video cable.
Connecting
Optional Equipment
to
Connecting to an amplifier equipped with
channel analog stereo or Dolby Pro Logic
II /Pro Logic
two
Connect the Left and
this
Right
and right
unit to the audio left
er, receiver
AUDIO OUT
in
jacks on your amplifisystem, using the audio cables.
stereo
or
jacks
on
Notes:
If the audio format of the
the
capabilities of
produce a strong,
To
see
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the
On-Screen
Display,
press AUDIO.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
1.
Connect this unit's DIGITAL AUDIO OUT
jack
the corresponding
an optional digital
(OPTICAL or COAXIAL) to
jack on your amplifier. Use
(optical or coaxial) audio cable.
2.
You will need to activate this unit's
"AUDIO"
(See
Digital
on
InstaliodSeup
in
digital output.
20).
page
Multi-channel sound
A
digital multi-channel
sound quality. For this
connection
provides
the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS
output will be in
Licensing agreement, the digital
DTS digital out when DTS audio
stream is selected.
Rear of this unit
2 channel
analog
stereo
or
Pro
Dolby
Logic
II/Pro
Logic
connection.
DVD exclusive out
DVD/VCR OUT
Digital
COAXIAL
DIGITAL INPUT
multi-channel connection
L
(DVD
exclusive out
connecttion)
R
OPTICAL
AUDIO INPUT
DIGITAL INPUT
Amplifier (Receiver)
11
Before
in
Tuning
a
Operation-VCR part
video channel
6.
on
Press PROG. 3
more
TV
your
or
4 on the front of your VCR for
than 4 seconds.
RF36 will appear in the display window.
The following picture will be displayed on the TV
Notes:
screen.
The
output frequency of this video recorder
(VCR) is set at UHF channel 36. If channel 36
is already used by another TV station, or if the
picture is distorted, you can change the
transmitter channel of your VCR. Stages 5
8
will show you how to change the output
frequency of your VCR.
~
Your TV receives
recorder
7.
from the video
channel number
on
and VIDEO cables then your TV should
already have a dedicated video channel built
into
it, usually called AV.
36
Press PROG. 3
or
4 to select another video
channel. You may select any channel number
between 22 and 68.
your TV
and tune it in so that you may watch video
tapes. If you have used a SCART or AUDIO
a
CHANNEL
PSET
R
like another TV station. You
(VCR)
have to select
signals
RF
You
also set it to "OFF" if there is any
interference when your TV is connected to the
can
VCR with
8.
Select
a
a
SCART lead.
TV channel number
on
which you wish to
watch video's.
I
Press
the front of your VCR when you
on
have finished.
1.
Make
VCR
that you have correctly installed your
described earlier in this book.
sure
as
Press POWER to turn
Turn
2.
on
Insert
on
your VCR.
Tune this channel
so
appears.
Store this channel
on
that
a
blue
bright
screen
your TV.
your TV.
a
pre-recorded
video
tape into your VCR
and press PLAY on the remote control.
Select a TV channel number on which you wish to
watch video's.
Don't worry if you don't have a video-tape to play
at this stage! If you switch your VCR on and
continue stages 3
4, instead of seeing video
~
playback
tune your TV until you
see a
bright
Note:
Make
that you have correctly installed your
VCR and successfully tuned in a dedicated
sure
video channel
your TV. If you do not tune in a
dedicated video channel on your TV you will be
on
unable to view and record video
tapes!
blue
screen.
3.
Tune this channel until the video
is
sharp
for the very
and the sound is clear.
first time
If you have used a SCART or AUDIO and VIDEO
cables you will not have to tune your TV, simply
select the AV channel. The AV channel is already
Following picture will display on the TV screen
when you have just connected your video
pre-tuned
4.
picture
Using your VCR
for
optimum
Store this channel
video
playback
on
your TV.
your TV.
You will need to look at the TV instruction book if
on
recorder for the very first time.
To make
tuning
3 to 4
shown "ACMS"
as
TV
stations, please follow stages
(see p.14).
you do not know how to do this.
5.
8 if you cannot
obtain clear video playback as described in
Only
carry out
stages 1
stages
4. Select
~
a
5
~
TV channel number
on
which you wish to watch video's.
Make sure that your VCR is in standby pressing
POWER on the remote control (only the clock will
be
12
displayed).
A
BD
CH
NN L
Pr-12
ACMS
DK
FI
PSS FOTHERS
the clock
Setting
To set the colour
Manually
The clock in your VCR controls time and date
settings for your VCR.
automatically during ACMS
(Automatic Channel Memory System) when
The clock is set
VCR detects
Teletext
a
signal.
channel that broadcasts
your
a
1.
Press i.
2.
The main
3.
Press 1
or
2 to select the SYSTEM and press OK.
4.
Press 3
or
4 to select
If the broadcast
signal is weak
will require setting
the clock will not be set and
system
menu
will appear
on
the TV
according
screen.
to the COLOUR
system used.
manually.
1.
Press i.
Press 1
or
2 to select TIME DATE.
Press OK.
VCR
REC
Dr.
NIC
fOSD
The auto
pressing
adjust
D
or
mode
be set to "OFF"
can
E if you want to set the time
ON
OFF
by
16:9
4:3
DECO
DER
OPR
manually.
Press OK.
5.
Press 1
or
2 to select the RF AUDIO.
Press 3
or
4 to select
according
to the RF AUDIO
used.
AUTO
ADJUST
:
ON
TIME
DATE
VCR
REC
NIC
fOS
ON
OFF
6.
Press i to
Dr.
E
4:3
remove
DER
OPR
the
menus
from the TV
screen.
HHMNDDMMYY
:.
-
-
--
--
--
---
.
TIME
DATE
2.
Use the numbered buttons
to alter the
the remote control
on
HOURS, MINUTES, DAY,
MONTH and
YEAR.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The
of the week will appear
when you enter the year.
day
automatically
HHMNDDMMYY
8
:.
00101
.
THU
TIME
DATE
3.
If you make a mistake press 1
correct details.
4.
Press i.
or
2 and enter the
13
How to
using
This VCR
easily be programmed by using
displayed on screen.
the
menu
can
menus
The
the main
controlled from the Remote
menus are
Control Handset.
1.
Switch
pressing
2.
your TV set and video recorder
the POWER button.
on
by
will appear
menu
on
the TV
Tuning
Automatically
If the TV broadcast
signal
is weak your VCR
may not detect the necessary information and
will not be able to store them correctly. To overcome
this
turn to the MANUAL TUNING
problem please
section
Press i button.
The main
in TV Stations
on
page 15.
1.
Press POWER to turn
2.
Press i button.
your VCR.
on
screen.
The main
Press 1
will appear on the TV
2 to select the ACMS.
menu
or
screen.
Press OK.
VCR
PSET
R
Pr-12
ACMS
TIME
DATE
SYSTEM
Dr.
NIC
fOSD
ON
OFF
16:9
4:3
DECODER
OPR
12
REC
REC
Timer
recording setting (see p. 25).
PR SET Manual tuning setting (see p. 15).
ACMS ACMS (Automatic Channel Memory
System) (see p. 14).
TIME DATE
Date & clock setting (see p. 13).
SYSTEM To set the Colour TV System
(see p. 13).
Dr. To check a problem with your VCR
(see p. 35).
F. OSD ON/OFF To display the operational
-
PSET
R
TIME
DATE
VCR
SYSTEM
Dr.
Pr-12
NIC
fOSD
ON
OFF
Pr-12
16:9
4:3
DECODER
OPR
-
-
-
-
A
BD
CH
NNL
DK
FI
PSSFOTHERS
-
Pr-12
ACMS
-
mode of your VCR
3.
-
p. 35).
To select the aspect ratio of your TV
(see
DECODER
OPR
O
NIC
To
-
36).
use a
pay-TV
decoder
(or
Satellite) with your VCR
(see p. 36).
To improve the playback picture
(see p. 23).
-
-
p.
To activate
sound
(see
or
deactivate the NICAM
or
process.
The VCR's clock will be set
automatically
automatic
tuning has finished. If the clock
please see "Setting the clock manually" on
digital
when
is wrong
page 13.
36).
p.
Tip:
You
2 to select COUNTRY.
(A:Austria, B:Belgium, CH:Switzerland,
D:Germany, DK:Denmark, E:Spain, F:France,
I:Italy, N:Norway, NL:Nertherlands, P:Portugal,
S:Sweden, SF:Finland, OTHERS)
Press OK again to start the automatic tuning
(see
16:9/4:3
Press 1
01
C02
00
TVE
02
C03
00
HRT
03
C04
00
CNN
change the menu language on the DVD
setup menu. (See the Menu Language on page 18.)
can
S
E
Pr-12
ACMS
3.
Press 1 and 2 to select the desired
Press OK and press 3
4.
Press i to
remove
the
or
menu.
4 to select.
menus
from the TV
4.
screen.
The TV STATION TABLE will appear when
is complete.
Press i to
your
02
C03
00
HRT
03
C04
00
CNN
04
C05
00
TMC
05
C06
00
YLE1
06
C07
00
YLE2
07
C08
00
RIKIS
08
C09
00
RTE1
PSET
R
14
settings.
save
MOVE
:
DELETE
:
,
tuning
in TV Stations
Tuning
In certain
areas
of the
4.
Manually
Searching
will
stop when it locates
country broadcast signals
Press 3
or
4 to
correctly.
adjust.
PR
CH
09
C10
You must tune in these weaker broadcast
manually
MFT
in order for your VCR to store
STATION
CHANNEL/CABLE
:
AV
PSET
R
them.
1.
station.
Press 2 to select MFT.
may be too weak for your VCR's automatic
tuning process to find or assign TV stations
stations
a
5.
Press i.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
Press 2 to select STATION
so
that you may
name
your TV station.
Press OK.
screen.
The TV station
Press OK.
list will appear.
name
PR
CH
MFT
09
C10
00
VCR
Pr-12
REC
ACMS
TIME
DATE
SYSTEM
Dr.
PSET
R
NIC
fOSD
ON
OFF
16:9
4:3
DECODER
OPR
6.
Press D
or
E to select
station
a
name
from the list.
Press OK to select it.
PR
CH
01
MFT
STATION
00
PR-01
CHANNEL/CABLE
:
If your station
OK, but go to
isn't
name
stage
on
the list do not press
7.
AV
PSET
R
2.
Press i.
The station table will appear.
Press 3 or 4 to select the programme number
that you want to tune
(for example,
PR
09).
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
CH
MFT
09
C10
00
PSET
R
7.
02
PR
You
change a TV station name manually
than using the "standard" names.
can
rather
Press G.
Press 3
or
the
station
new
Press 1
,
or
4 to select letters and numbers for
name.
2 to
move
back and forth between
characters.
3.
Press OK.
Press OK.
Press AV to select C
(Standard stations)
or
S
(Cable stations):
C02
-
C69,
S01
-
S41.
PR
C09
Enter the channel number of station that you want
to tune with the numbered buttons
to find the
or use 3 or
09
CH
C10
00
STATION
PSET
R
8.
PR
MFT
4
station.
required
CH
MFT
STATION
--
----
CHANNEL/CABLE
Press i, confirm the station
Press i again.
Your
new
TV station has
now
placement.
been tuned into your
VCR.
:
AV
If you wish to
stages 1 8.
manually
tune other stations
repeat
-
PSET
R
10
11
12
13
14
15
16
PSET
R
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
MOVE
:
DELETE
:
,
15
the order of TV Stations
Changing
After tuning TV stations into your VCR you may
wish to change the order in which they are stored
without having to retune them against! The instructions given on this page will show you how you can
simply move them into your desired order.
1.
Deleting
After tuning TV stations into your VCR you may
wish to delete a station.
The instructions given on this page will show you
how easily delete any unwanted TV stations.
1.
Press i.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
TV Stations
Press i.
The main
Press 1
screen.
will appear on the TV
2 to select the PR SET.
menu
or
screen.
Press OK.
Press OK.
VCR
Pr-12
REC
VCR
Pr-12
REC
TIME
DATE
ACMS
SYSTEM
ON
OFF
16:9
4:3
PR
DECODER
ON
OFF
CH
MFT
STATION
00
PR-01
CHANNEL/CABLE
:
PR
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
MOVE
:
DELETE
:
PR
03).
or
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
00
02
C03
00
PR-01
PR-02
04
C05
00
PR-04
05
06
C06
C07
00
00
PR-05
07
C08
00
PR-07
08
C09
00
PR-08
4 to select the
to
MOVE
:
DELETE
:
PR
03)
,
,
C02
Press 1.
After
a
short
while, the selected station will be
deleted.
PR-06
programme number
(for example,
01
C02
00
PR-01
02
C03
00
PR-02
03
C05
C06
00
PR-04
00
PR-05
04
AV
(for example,
PSET
R
01
move
:
programme number
02
PSET
R
you want to
PR-01
4 to select the
you want to delete.
03
or
00
Press i.
Press 3
3.
Press 3
STATION
CHANNEL/CABLE
programme number
(for example,
PSET
R
3.
MFT
PSET
R
4 to select the
move
CH
AV
2.
you want to
Press 2.
OPR
01
PSET
R
or
16:9
4:3
DECODER
OPR
01
Press i.
Press 3
Dr.
NIC
fOSD
2.
SYSTEM
NIC
fOSD
Dr.
TIME
DATE
ACMS
PR
01
C02
00
PR-01
02
C03
00
PR-02
04
05
06
C06
00
PR-04
C04
C07
00
00
PR-05
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
MOVE
05).
DELETE
PSET
R
4.
Press i to
remove
the
:
:
menus
,
from the TV
If you wish to delete other TV stations
stages 1 3.
screen.
repeat
-
05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
01
C02
00
PR-01
02
C03
00
PR-02
04
05
C04
00
PR-04
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
PSET
R
4.
Press OK.
The selected programme will be moved to the
new programme number.
If you wish to move other TV stations repeat stages 1
Press i to
remove
the
menus
from the TV
08
MOVE:
-
4.
screen.
How to
selecting Stored
Stored TV stations
01
C02
00
PR-01
02
C03
00
03
00
04
C05
C06
00
PR-02
PR-03
PR-04
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
16
MOVE
:
DELETE
:
,
DELETE
PSET
R
can
:
,
TV stations:
be selected in either of two
ways.
Press PROG. 3 or 4 to select different stations that
are tuned into your VCR.
You may also directly select stations using the
numbered buttons on the remote control.
Before
Operation-DVD part
On-Screen
You
Display
general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
display
can
the
Press DISPLAY
1.
The selected item is
Press b / B to
3.
an
inputting
Title Number
the
change
the title
Chapter
highlighted.
For
number).
some
also
If
no
provide
button is
on-screen
for 10
functions,
all of the features
seconds, the
pressed
display disappears.
ENTER
0:20:09
b/Bor
AUDIO
language
ABC
Enter
a
SUBTITLE
Angle
123456789
ANGLE
Sound
3D SUR
Selection Method
Marker
menu
(or
PBC
1/3
play
from this
prohibited
or
B, Numbers
ENTER
Numbers
0:20:09
point
not available
b /
mode)
Time search
Action
b/B
sequence
Marker Search
Resume
b/Bor
1/3
Track Number
MARKER SEARCH
InstaliodSeup
b/Bor
1 ENG
Items
1/9
Numbers, ENTER
Example: On-Screen Display during
playing VCD
TITLE
Repeat
B, Numbers
setting.
Playback Status/Restrictions
Repeat title
A-B
1/12
b /
language
and Digital Audio
Output mode
Notes:
?
B, Numbers
Audio
Subtitle
Some discs may not
shown below.
Number
Time search
setting. You can
appropriate (e.g.
press ENTER to execute the
?
1/3
b /
ENTER
item.
the number buttons if
use
Selection Method
Items
during playback.
Press v / V to select
2.
Example: On-Screen Display during
playing DVD Video
ENTER
b/Bor
Audio Channel
STEREO
Sound
AUDIO
3D SUR
b/B
Example: On-Screen Display during
playing divx movie disc
Selection Method
Items
Track Number
1/3
b /
B,Numbers
ENTER
Time search
0:20:09
Audio
language
and Digital Audio
Output mode
Subtitle
Sound
language
b/Bor
1
MP3
ABC
Numbers, ENTER
ENG
AUDIO
b/Bor
SUBTITLE
3D SUR
b/B
17
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 18 to 22.
To
display
display
the
Disc Subtitle
Off
Disc Menu
Original
2.
Use v / V to select the desired
alternate
Setup
menu
appears.
option then press
to the second level. The screen shows
the selected
item,
Use v / V to select the second desired
press B to
move
as
well
option
as
then
Select
a
language
for the
Use v / V to select the desired
5.
Press SETUP
then press
ENTER to confirm your selection. Some items
require additional steps.
setting
PLAY to exit the
Original:
Refers to the
disc
recorded.
was
Setup
menu
and
on-screen
DVD
Setup
menu.
original language
Other: To select another
track
in which the
language, press number
buttons then ENTER to enter the corresponding 4-digit
number according to the language code list in the
reference chapter. If you enter the wrong language code,
press CLEAR.
to the third level.
4.
or
Language
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Press SETUP. The
setting for
setting(s).
Select
Select the
1.
the current
Menu
Disc Audio / Subtitle / Menu
Operation
move
Move
display.
To go back to the previous level:
Press b on the remote control.
18
Original
screen.
To go to the next level:
Press B on the remote control.
3.
Disc Audio
A second press of
menu.
SETUP will take you back to initial
B to
English
Language
and exit the Menu:
Press SETUP to
General
Menu
4. When the confirm
DISPLAY
Cancel is
DISPLAY
TV
16
Aspect
Display
Mode
Progressive
TV
Output
menu
to
:9Wide
highlighted
highlight Enter.
as
appears on your screen
default. Use the b button
Widescreen
Scan
5.
Off
Select
Pressing
scan
RGB
ENTER will set this unit to
Progressive
mode.
Caution:
Once the
Move
TV
:
Select
DVD
Aspect
4:3
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
Select when
a
On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc tray.
See that "DISC" is displayed on the display window.
standard 4:3 TV is connected.
16:9 Wide: Select when
a
16:9 wide TV is connected.
2)
Press STOP and hold it for five seconds before
Display
Display
DVD
Mode
Mode
setting
works
only
when the TV
TV
LetterBox: Displays a wide picture with bands
upper and lower portions of the screen.
on
the
Output Select
Set this unit TV
TV connection
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Output
Select
options according
to the
type.
YPbPr: When your TV is connected with the
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
jacks
progressive
it. The video
Aspect
mode is set to "4:3".
To turn On
InstaliodSeup
output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
releasing
on
this unit.
RGB: When your TV is connected with the SCART
(RGB signal) jack.
scan:
Connect
component out of this unit to the input of your
monitor/television, set your television or monitor to
Component Input.
1. Select
"Progressive
Scan"
on
the DISPLAY
menu
then press B.
DISPLAY
TV
Aspect
Display
Mode
Progressive
TV
Output
Scan
On
Off
Select
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
Note:
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive
Scan
on
the DVD
Player.
19
AUDIO
Each DVD disc has
Set this unit AUDIO
audio
system you
variety of audio output options.
options according to the type of
a
use.
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48KHz
DRC
On
Vocal
On
Move
Dolby Digital
Select
DVD
/ DTS / MPEG
DivX
Bitstream: Select "Bitstream" if you connect the
DVD Player's DIGITAL OUT jack to an amplifier or
other
equipment
with
Dolby Digital,
a
DTS
or
MPEG decoder.
PCM
MPEG): Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
(for Dolby Digital
/
audio.
Off
not
(for DTS): If you select "Off", the DTS signal
output through the DIGITAL OUT jack.
is
DVD
Sample Freq. (Frequency)
If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice
is
made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of
any further processing.
signal through
Check the documentation for your
its capabilities.
Dynamic Range
With the DVD
Control
format, you
amplifier
DVD
(DRC)
can
hear
a
without
to
verify
DivX
program's
soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the
quietest ones).
This allows
you to listen to a movie at a lower volume without
losing clarity of sound. Set DRC to On for this effect.
Vocal
DVD
Set to On
playing.
only
when
multi-channel karaoke DVD is
The karaoke channels
normal stereo sound.
20
a
on
the disc mix into
OTHERS
The
DivX(R)
PBC, Auto Play and DivX(R) VOD settings
can
be
changed.
You
VOD
DivX
display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
can
OTHERS
PBC
Auto
DivX(R)
On
Off
Play
Your
DivX(R)
Video On Demand
VOD
Select
registration
To learn
code is
more
:
XXXXXXXX
visit
www.divx.com/vod
(Done)
Move
Select
The
PBC
Set
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
to On
are
or
encrypt
Off.
played according
to the
PBC.
Off: Video CDs with PBC
are
played
the
same
way
as
Audio CDs.
Auto
You
Play
move
Notes:
If you rent the DivX VOD file, it has several
viewing limits as shown below.
?
Display
DVD
set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted.
Play
mode is set to
play
back the title
longest playback
automatically.
On: Auto
Play
function is active.
Off: Auto
Play
function is not active.
Play
function may not work for
DivX(R)
can
options
of
watch the file.
VOD Rental
This rental has 3 views left.
Do you want to
On, this DVD player will
search for title that has the
then
the number which you
View
can
If Auto
InstaliodSeup
file.
use one
of your 3 views now?
time and
(Yes) (No)
?
The rental has been
expired.
Notes:
The Auto
some
DVDs.
Rental
Expired
(Done)
?
Display
the authorization
error.
Authorization Error
This
player is not authorized
to play this video.
(Done)
21
LOCK
Password
(Parental Control)
You
LOCK
Rating
Unlock
Password
New
Country
enter
can
2. Follow
step
"New" is
Input
Move
that may not be suitable
of these discs contain
scenes
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
suitable
more
scenes as an
If you
4-digit code,
again to verify.
it
control feature allows you to block
to scenes below the rating you input, there
parental
new
1.
Press SETUP to
2.
Input
the
display
3.
Enter
a new
code
Enter the code of the
"Rating"
on
the LOCK
menu
then
were
press B.
Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
the
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
rating
a
from 1 to 8
using
1.
Setup
clear it
using
menu.
security
1-8:
tions and
Rating one (1)
rating eight (8) is
has the most restricthe least restrictive.
unlock, parental control is
plays
not active
in full.
Notes:
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
same
is
the disc.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
described above.
selection, then
country/area
used to rate the DVD video
Select
whose standards
disc, based
on
the
chapter.
Code"
"Country
on
the LOCK
then
menu
2.
Follow
3.
Select the first character
4.
Press ENTER and select the second character
using
the v / V buttons.
Unlock
If you select
and the disc
as
press B.
5.
available
the
can
DVD
Code
list in the reference
access
scenes
menu.
by
1. Select
If you set
the same
or
then press ENTER.
number "210499" and the
6-digit
Country
Rating
(Rating). "Change"
forget your Security Code
your children from being able to view
material you believe is unsuitable.
3. Select
then press B.
code is cleared.
preventing
22
shown left
as
menu
If you forget your security code you
the following steps:
alternative.
2. To
the LOCK
Select
DVD
for children to view.
access
2
on
4. Press SETUP to exit the
Some movies contain
The
change password.
highlighted.
3. Enter the
Rating
or
1. Select Password
ES
Code
(Security Code)
step
2
as
shown left
(Rating).
using
v / V buttons.
v / V buttons.
Press ENTER to confirm your
selection.
country code
Operation
5.
Playing
a
You will
be able to load and
tape
eject video cassettes when your VCR is plugged into the mains.
Your VCR may also playback recordings from
NTSC tapes (on PAL TV).
only
Getting
better
a
To switch off the slow motion and
picture
During
best possible picture automatically. If the quality of
the recording is poor, repeatedly press TRK + or
on the remote control to manually adjust the
tracking until any distortions have been removed.
Press numbered 0 on the remote control to switch
-
1.
Make
tracking
back
on
as
Turn
on
on
The video cassette should have the window side
facing
up and the
arrow
Press PLAY to start
facing
away from you.
playing
your tape.
video cassette which has had its
If you load a
record protection tab
cassette will start
give
3.
the best
can
be
seen
or
+
in the
to the status
picture,
reduce
-.
Press STOP to end
playback.
Press EJECT.
tape is reached, your VCR will
stop playback automatically, rewind, stop, eject the
tape.
Operation
CM
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then
resume normal playback.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
material).
Repeatedly press CM SKIP to skip:
4 Press 120 seconds
5 Press 150 seconds
automatically adjust
picture quality.
the
tracking
to
picture.
repeatedly to advance
a
down at about 1/19 times the normal
6 Press 180 seconds
OPR
(Optimum
Picture
Response)
This feature
the
tape frame by frame.
If you press FORWARD, the picture will be slowed
be
If distortions
picture according
3 Press 90 seconds
automatically.
Press PAUSE/STEP
playback
for up to 5 minutes. After 5
minutes your VCR will stop the tape to prevent
damaging the tape or your VCR
can
on
2 Press 60 seconds
removed, playback of the
Press PAUSE/STEP to still
Tapes
the
may appear
of tape.
shuttle, the noise bars
1 Press 30 seconds
AUTO TRACKING
Your VCR will
shuttle, press
If the end of the
your VCR.
Insert the video cassette into your VCR.
2.
6.
again.
that you have correctly connected your
described earlier in this book.
your TV.
Press POWER to turn
slow motion and
them with TRK
sure
VCR
G.
the desired function.
When a cassette is inserted and playback started,
the automatic tracking function works to get the
automatic
playback, Shuttle :
During playing back or still picture press F or
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play,
2xplay, 7xplay)
Slow motion
paused
automatically improves playback picture
quality by adjusting your VCR to the condition of the
tape.
1.
Press i.
2.
Press 1
3.
Press OK.
or
2 to select OPR.
.
Still
picture quality can
pressing TRK + or
be
improved slightly by
-.
4.
Press PLAY to continue
playing
your tape.
Picture search:
back press either FORWARD or
BACKWARD and this will enable you to rapidly
wind the tape (7 times normal playback) and see
R
During playing
where you
are on
the
Logic search:
During fast forwarding
tape.
OFF
SOFT
SHARP
f
ON
OFF
4.
Press
3
or 4
16:9
4:3
MS
TIME
DATE
SYSTEM
DECODER
Dr.
NIC
-
OPR
i
OPR
repeatedly
to select:
OFF, SOFT
or
SHARP.
Please note you may
rewinding press and hold
FORWARD or BACKWARD the picture will be
played back at 7 times normal playback speed.
VCR
12
12
playing
or
5.
a
only
set OPR when
tape.
Press i return to
screen.
23
Instant Timer
5.
Recording (ITR)
Your VCR allows you to make
variety of simple methods:
recordings using
produce improved picture and
quality, however LP will provide twice
recording time as SP.
Instant Timer
video cassette
Your VCR
runs
Press REC/ITR to start
which
will record up to 180 minutes using Standard Play
(SP); using LP you will be able to record up to 360
minutes. Please note there will be
Make
VCR
quality
when
slight
using LP.
a
7.
2.
Insert
Press PAUSE/STEP to avoid
protection
your VCR.
The video cassette should have the window side
facing
3.
4.
up and the
Press PR
arrow
facing
away from you.
to select the programme
number you wish to record.
+
or
-
paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5
minutes your VCR will stop recording to prevent
damaging the tape or your VCR.
EJECT will appear
seconds.
from EURO AV1 SCART socket
of your unit.
AV 2 for recording from EURO AV2 SCART socket
on
the
recording
of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
on
the
rear
(Left
&
rear
Right)
sockets
on
the front of your unit.
on
the TV
screen
for
few
a
Notes:
If you do not wish to record
on a
tape (this
can
happen quite easily by accident!) remove the
protection tab on the back edge of the video
It is
AV 1 for
recording.
Press EJECT.
control.
displayed.
be
Press STOP to end
cassette.
you wish to record from is
24
can
You may also directly select programme number
using the numbered buttons on the remote
If you wish to record directly from the SCART or
RCA sockets repeatedly press AV until the socket
unwanted
If you press PAUSE/STEP
unit will
enter the record pause mode and ITR is cancelled.
8.
tab into
recording
recording.
during ITR, this
loss in
your VCR.
on
video cassette with
a
recording.
Press PAUSE/STEP to continue
that you have correctly connected your
described earlier in this book.
Press POWER to turn
much
as
scenes.
sure
as
sound
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
Tapes
1.
or
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
incorporates Long Play (LP)
and sound
6.
out.
enables you to record up to twice the amount of
time on a video cassette. For example an E-180
picture
Long Play
SP will
a
Recording (ITR) start recording
immediately for a set period of time or until the
Press LP if you wish to record in
Standard Play.
possible to record on a video cassette
record protection tab removed by covering
with self adhesive
with the
the hole
tape.
Remember you can record one programme while
watching another by starting your instant recording,
press TV/VCR to appear TV indicator in the display
window and then selecting a different channel on
your TV.
Timer
recording using
Display
You may also select the the start and end times
On Screen
pressing
3
or
PR-01
Note:
Before setting the timer make sure that you have
set the VCR clock correctly and you know which
stations you have tuned TV stations on your VCR.
1.
2.
4.
PR
You may set up to seven timer record events
within one month of the current date.
7.
Insert a video cassette with protection tab into
your VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
or
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
-~
-~
::
--
-~
::
--
-~
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
SP
SP
SP
SP
SP
SP
DATE
TIME
16
19002000
::
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
-~
9.
Press STOP to end
SP
--
::
--
SP
--
SP
--
DATE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
If at
later date you wish to delete or change any of the
settings in timer event memory you may do so without
having to enter all the timer event information again.
Simply display the timer event screen. Press 3 or 4 to
select the event that you wish to delete or change.
Press 1 to delete the event...or
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3
or 4 to enter the correct information.
SP
SP
SP
SP
SP
SP
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
a
SP
Press the numbered buttons to enter the date of
the programme.
If you press OK before entering the date you may
select one of the following automated recording
features. Press 1 or 2 to select, then press OK to
confirm.
DLY To record every day (except Saturday and
Sunday) at the same time.
SU~SATo record at the same time every week.
DATE
recording.
Notes:
TIME
SP
SP
SP
SP
SP
SP
SP
SUMOTUWETHFRSA
6.
::
--
Check that the timer event details are correct.
Press i twice.
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your VCR Standby.
will appear in the display window while your
VCR waits to make the recording. To watch a DVD
during timer recording standby mode, press
POWER and DVD to switch to DVD mode.
SP
--
-
PR-01
-~
8.
SP
--
::
--
SP
--
::
--
SP
--
Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1
9, press 0 first, then
the channel number; for example Stations 3 03.
You may also select Channels by pressing 3 or
4. Once selected press 2.
If you wish to record from AUDIO IN (L/R) and
VIDEO IN on the front or from the EURO SCART
sockets on the back of your unit, press AV to
select for correct display (AV1, AV2 or AV3).
PR
--
TIME
-
5.
::
LP).
Press 1 to delete the event.
PR
SP
~
--
PR-01
replace.
4.
190020
::
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program. IP mode is not
selected when VPS/PDC is ON.
Press OK to start setting the timer record event.
If all timer record events are full press 3 or 4 to
select the event that you wish to remove and
DATE
16
TIME
Press 3 or 4 to switch VPS/PDC on or off.
Press 2 to select the recording speed.
Press 3 or 4 to select the desired tape speed
(SP, IP,
Press i.
Press 1 or 2 to select REC.
Press OK.
PR
DATE
--
PR
3.
by
Press the numbered buttons to enter the recording
start and end times of the programme that you wish to
record.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme
will always be given priority.
Example:
Programme 1 is programmed to start at 16:00 and end at 17:00.
Programme 2 is programmed to start at 16:30 and end at 17:30.
(In this case, Programme 1 will be recorded in its entirety, but
only the last 30 minutes of Programme 2 will be recorded.)
Video Programme System (VPS)
The Video Programme System (VPS) ensures that the TV programmes that you have programmed for timer recording will be
recorded exactly from their beginning to end, even if the actual
broadcasting time differs from the scheduled time due to
delayed start, or if the programme is extended beyond its
scheduled time. Also, if a programme is interrupted, for example,
if a news flash is inserted, the recording will also be interrupted
automatically and resumed when the programme continues.
The VPS signal is broadcast by the TV station and this controls
the timer in the video recorder.
VPS should be set ON for all timer recordings from TV stations
broadcasting these signals. It should be set OFF for all timer
recordings from TV stations that are not broadcasting these signals.
The similar system PDC, which is used in the time being in
the Netherlands, can also be used with your new video
recorder.
***
25
Playing
a
DVD
or
General Features
Video CD
Note:
Playback Setup
Turn
1.
the TV and select the video
on
connected to the DVD
Turn
2.
the
the audio
on
input
source
input
source
player.
system (if applicable) and select
connected to the DVD
player.
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the
3.
side down.
playback
Press OPEN/CLOSE to close the
4.
starts
automatically.
If
playback
tray. Playback
does not start,
press PLAY.
In
cases, the disc
some
menu
might
Unless stated
Moving
to another TITLE
When
disc has
a
title/chapter
you want to view, then press ENTER to start.
Press TITLE or DISC MENU to return to the menu
screen.
and
stopped
then the
b / B to
move
You
"PBC"
on
page
title
operating
another
DVDs may have a region code. Your player does
not play discs that have a region code different from
player.
(two).
?T
o
watch
a
The
region
code for this
is 2
more
than
Press SKIP .
than
more
track, you
one
chapter/track
one
chapter
can move
or a
to
follows:
as
>
briefly during playback
select the next chapter/track or to return to the
beginning of the current chapter/track.
?
Press SKIP . twice
or
briefly
to
step back
DVD
during
timer
to
to the
previous chapter/track.
o
go
directly
to any
chapter during
DVD
playback,
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
numberoruseb/B.
Search
1.
Press m
or
M
during playback.
2.
Press m
or
M
repeatedly
to select the
DVD, DivX disc; X2, X4, X16
Video CD; X2, X4 or X8
recording standby
to switch to DVD
3.
To exit SEARCH
Changing
required
different
or
X100
mode, press PLAY.
the Audio Channel
Press AUDIO
26
disc has
speed.
mode, press POWER and DVD
mode.
player
on a
?
?T
21).
a
disc has
parental control is set and the disc is not within
the rating settings you must input the password.
(See "Lock Menu" on page 22.)
your
its number while
can
When
If
?
to another title.
to another CHAPTER/TRACK
Notes:
?
to
can move
playback is
appropriate number (0-9) or use
Moving
may differ. Follow the instructions on
the each menu screen. You also may set PBC to
(See
title, you
one
play any title by inputting
playback is stopped.
procedures
Off
than
another title. Press DISPLAY while
Use the number buttons to select the track you
want to view and press RETURN to return to the
settings
more
appear
Use the bBvVbuttons to select the
Menu
use
the remote control. Some features may also be
available on the Setup menu.
instead:
menu screen.
otherwise, all operations described
repeatedly during playback to hear
audio channel (Stereo, Left, or Right).
a
Still Picture and
Frame-by-Frame Playback
Repeat
You
Press PAUSE/STEP
1.
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
To exit still motion
2.
on
mode,
Press
Press PAUSE/STEP
The DVD
Use m
2.
player
DVD Video Discs
press PLAY.
?
or
now
1/16, t 1/8, t 1/4,
1/16, T 1/8, T 1/4,
With
Video
a
or
t
or
T
required speed:
1/2 (backward), or
1/2 (forward).
t
T
CD, the Slow speed changes: T
1/16, T 1/8, T 1/4
To exit Slow Motion
3.
go into PAUSE mode.
M to select the
or
T 1/2
(forward).
Slow motion
playback
reverse
is not
?
Title:
repeats the
?
Off
does not
:
?
Track
?
All
?
Off
-
with
Video CDs and DivX Discs.
-
current title.
play repeatedly.
Repeat
Track/All/Off
repeats the current track
repeats all the tracks on a disc.
:
:
does not
:
If you press SKIP
play repeatedly.
(>)
(Track) playback,
possible
desired
?OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the repeat function (See "PBC" on
page 21).
mode, press PLAY.
in
a
Notes:
?
Note:
disc.
Repeat Chapter/Title/Off
Chapter: repeats the current chapter.
Video CDs
(X) during playback.
will
title/chapter/all/track on a
REPEAT during playback to select
a
repeat mode.
Slow Motion
1.
play
can
the
during Repeat Chapter
repeat playback cancels.
once
3D Surround
To
produce
3D surround effect that simulates
a
multi-channel audio from two stereo
speakers (instead
of the five+ speakers normally required for multi-channel audio from a home theater system).
Random
Press RANDOM
1.
The unit
during playback or in stop mode.
automatically begins random playback
and RANDOM appears
Press RANDOM
2.
again
the TV
on
screen.
Use 3
during random playback, the unit
(track) and resumes random playback.
Note:
menu
to
use
PBC, You
must set PBC to Off
the random function
(See
on
"PBC"
on
the
1.
page
1.
2.
3.
repeat
playing
at any chosen time
on
Press DISPLAY
box shows the
A-B
a
effect, select "Normal".
Time Search
2.
To
will be
To turn off the 3D Surround
21).
Repeat
option
option.
highlighted.
Use1or2totoselect"3DSUR".
To start
Video CD with
during playback.
4 to select the sound
or
The sound
SKIP >
selects another title
setup
2.
3.
By pressing
a
Press DISPLAY
to normal.
Tip:
On
1.
the disc:
during playback. The
elapsed playing time.
time search
Press v / V to select the time clock icon and
"-:--:--" appears.
3.
sequence.
Press A-B at your chosen
appears briefly on the TV
starting point.
required
start time in
"
A
*
end
"
point.
screen
and the
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
screen.
again at your chosen
"A B" appears briefly on the TV
repeat sequence begins.
again
the
seconds from left to
Press A-B
Press A-B
Input
4.
right.
Press ENTER to confirm.
Playback
starts from the
selected time.
to cancel.
27
Zoom
Use
to
zoom
enlarge
Press ZOOM
1.
the video
image.
during playback
or
still
playback
to
1600% size
screen
→
fit mode
→
the
can
100% size
when
screen
zoomed
4.
To
edly
move
normal
playback,
through
press ZOOM repeat-
?
may appear.
menu, the
Otherwise, the disc
screen.
offers features such
subtitle
a
angles,
as camera
options,
and
Press TITLE to exit.
3.
press CLEAR button.
or
Disc Menu
Notes:
?
menu
spoken language and
chapters for the title.
the
picture.
resume
appears
menu
on
the
menu
The
2.
Use the bBvVbuttons to
corresponding number or use the b
to highlight your selection. Then press
Press TITLE. If the current title has
Normal, Enhanced,
and Maximum.
3.
the
ENTER.
1.
image appears on
you're playing a DVD movie.
Press 3/4 to select between
Input
Title Menu
the way the
change
the contents of DVD discs: Menus
B v V buttons
Screen fit mode:
You
Checking
MENU.
Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→
DVD Features
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DISC
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2.
Special
Zoom may not work on some DVDs.
Screen fit mode is available for playing the DVD
Press DISC MENU and the disc
Press DISC MENU
again
is
menu
displayed.
to exit.
disc, VR disc and movie file.
Camera
Marker Search
Angle
If the disc contains
To enter
You
Marker
a
start
can
desired
the TV
point
from up to nine memorized
marker, press MARKER at the
a
the disc. The Marker icon appears
briefly. Repeat to enter up to nine
on
screen
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
camera
playback
To enter
points.
recorded at different
scenes
on
markers.
To Recall
1.
2.
or
Clear
During
disc
search
menu
Within 10
a
Marked Scene
press SEARCH. The marker
appears on the screen.
playback,
seconds, press
b / B to select
number that you want to recall
3.
Press ENTER and
marked
Changing
scene.
playback
or
a
marker
clear.
starts from the
You
on
any marker by
the marker search menu.
can
play
Language
Press AUDIO
different
repeatedly during playback
audio language or audio track.
to hear
a
With DVD-RW discs recorded in VR mode that have
both
main and
Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of
both (Main + Bilingual) by pressing AUDIO.
a
a
Or, press CLEAR and the marker
Subtitles
number is erased from the list.
4.
the Audio
inputting
its number
Press SUBTITLE
the different
repeatedly during playback
subtitle languages.
to
see
Note:
?
The subtitle file of the DivX file is
smi,
?
srt and sub.
If there is
no
information
not read in the DivX
28
displayed only
file,
or
"
1
there is
"
or
etc.
a
code that
are
can
displayed.
Playing
Audio CD
an
or
MP3/WMA
MP3 / WMA disc
limited
Disc
?
as
compatibility
with this
player
is
follows:
within 8
48 kHz (MP3),
Sampling frequency:
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
-
The DVD
player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
?
-
-
?
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY
or
ENTER and
playback
?
?
starts.
AUDIO CD
1/12
0:52:07
List
Program
creates
Track1
Track2
Track3
?
Track4
File
an
names
and must
Track5
Track6
?
Track7
Clear All
Track8
PROGRAM
They
ISO 9660 file
system.
should have
a
incorporate
an
should not contain
maximum of 8 letters
.mp3 or .wma extension.
special letters such as /
?*:"<>letc.
Edit
?
The total number of files
on
the disc should be
Operation
less than 650.
MP3 / WMA
1.
Press v / V to select
to
2.
folder, and press ENTER
a
the folder contents.
see
Press v / V to select
ENTER.
Playback
track then press PLAY
a
or
starts.
This DVD
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MUSIC
1/12
0:00:00
these
List
require certain pre-existing conditions (see
above) to ensure compatible playback.
Program
1-Music1
2-Music2
Customers should note that
3-Music3
4-Music4
required
5-Music5
6-Music6
DISPLAY
PROGRAM
Info
Edit
should
Tip:
?
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
Clear All
7-Music7
permission
always
be
sought
from the
copyright
owner.
If you
are
in
a
file list
return to the Folder
on
list,
the MUSIC
menu
the v / V to
use
and want to
and
highlight
press ENTER.
?
Press DISC MENU to
?
On
?
to the next page.
move
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
a
PHOTO word
on
When
a
playing
titles, you
top of the
file
can see
menu
containing
is
highlighted.
information such
the information
by pressing
as
track
DISPLAY.
29
Audio CD and MP3 / WMA Disc
Random
Features
1.
Pause
Press PAUSE/STEP
1.
2.
press
Moving
playback, press PLAY,
PAUSE/STEP again.
ENTER
or
(.
2.
To return to normal
until
repeatedly
playback, press RANDOM
RANDOM disappears from the
menu screen.
Tip:
to another Track
Press SKIP
1.
during playback or when
playback is stopped. Random Playback begins
immediately and RANDOM appears on the menu
screen.
during playback.
To return to
Press RANDOM
>) briefly during playback
track or to return to the beginning
or
By pressing
SKIP >
during
selects another track and
random
resumes
to go to the next
of the current track.
Press SKIP . twice
2.
previous
In
3.
case
track.
of audio
CD,
Repeat
You
1.
can
directly to any track,
using the numbered
(0-9).
To
2.
Press A-B
again at your chosen end point.
The Repeat icon and "A-B" appear on the menu
screen, and the sequence begins to play
repeatedly.
3.
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
Track/All/Off
play
a
track/all
on a
Press REPEAT when
disc.
playing
a
disc. The
repeat
icon appears.
2.
?
?
?
sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and "A" appear on the menu screen.
the
Press REPEAT to select
a
desired
To
play repeatedly.
Note:
If you press SKIP (>) once
the repeat playback cancels.
a
menu screen.
3D Surround
repeats the current track
All: repeats all the tracks on a disc.
does not
repeat
repeat mode.
Track:
Off(No display):
A-B
1.
to go
enter the track number
buttons
to go back to the
briefly
Repeat
during Repeat
Track
playback,
produce
a
3D surround effect that simulates
multi-channel audio from two stereo
speakers (instead
of the five+ speakers normally required for
multi-channel audio from a home theater system).
1.
Press AUDIO
during playback.
"3D SUR." appears
2.
Search
Press m
or
M
during playback.
2.
Press m
or
M
repeatedly
speed: X2, X4,
3.
30
X8
To exit SEARCH
to select the
backward
or
forward.
mode, press PLAY.
until
menu screen.
required
on
the
menu screen.
To return to normal
repeatedly
1.
playback, the unit
random playback.
playback, press AUDIO
"3D SUR." disappears from
the
Repeat Programmed
Programmed Playback
1.
A program
1.
Insert
2.
memory.
contain 30 tracks.
can
a
player
Press REPEAT when
Press REPEAT to select
?
disc.
?
?
2.
playing
Off(No display):
Press PROGRAM.
mark will appear to the right of the word
"Program" on the right side of the menu screen.
E
Erasing
Note:
again, then
the Program
to exit
disappear
the
mark will
MUSIC
List
List
E
Program
Track5
Track2
Track7
1-Music1
4-Music4
Track3
Track4
2-Music2
6-Music6
Track4
Track1
3-Music3
1-Music1
2-Music2
4-Music4
Track6
5-Music5
Track7
6-Music6
Clear All
Track8
E
Program
Track1
Track5
Clear All
7-Music7
DISPLAY
Audio CD Menu
PROGRAM
Info
the
setup
menu
"PBC"
on
to
the
use
Press CLEAR.
2.
must set PBC to Off
on
programmed playback
move
to the
"Program"
list.
Repeat
to
erase
Operation
erase
additional tracks
the list.
the
Follow
Complete Program
as
steps
1-2 of
"Erasing
a
List
Track from
Program
above.
Use 3/4 to select "Clear
complete Program
All", then press ENTER.
for the disc will be erased.
Note:
The programs
removed.
21).
page
to
Edit mode.
4.
List"
menu.
PBC, you
stop mode
Use v/V to select the track that you wish to
from the "Program" list.
Erasing
Note:
Video CD with
playback,
List
Program
Press PROGRAM in the
Program
Track
3.
The
a
during Repeat
Press B to
Video CD: Press PROGRAM while playback is
stopped. The program menu appears. Press
On
:
play repeatedly.
Edit
MP3/WMA Menu
PROGRAM to exit the
repeat mode.
2.
1.
(See
Video CD
on
PROGRAM Edit
desired
1/12
0:00:00
1/12
Track from
a
enter
Edit mode.
AUDIO CD
0:52:07
1.
a
does not
If you press SKIP (>) once
the repeat playback cancels.
Press PROGRAM
repeat
repeats the current track
All: repeats all the tracks on programmed list.
Note:
E
disc. The
Track:
Audio CD or MP3/WMA Discs:
AUDIO CD or MUSIC menu appears.
The
a
icon appears.
The program function enables you to store your
favorite tracks from any disc in the
Tracks
are
also cleared when the disc is
VIDEO CD
List
E
Program
Track1
Track5
Track2
Track2
Track3
Track3
Track4
Track1
Track5
Clear All
Video CD Menu
3.
Select
a
track
on
the
"List", then press ENTER
to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
4.
Press B.
Select the track you want to start
"Program" list.
5.
Press PLAY
or
playing
Playback begins
programmed the tracks.
"Program"
list have
To
normal
resume
playback,
the
ENTER to start.
the order in which you
Playback stops after all of the tracks
6.
on
select
a
played
on
in
the
once.
playback
from
track of CD
programmed
(or MP3/WMA) list
and then press PLAY.
31
Viewing
this DVD
Using
JPEG Disc
a
Player
you
can
Moving
view discs with JPEG
files.
1.
Insert
disc and close the
a
the TV
on
appears
tray. The PHOTO
menu
screen.
Press SKIP
(. or >) or cursor (b or B) once
while viewing a picture to advance to the next or
previous file.
JPEG
Zoom
PHOTO
Use
(see
Preview
List
JPEG Folder 1
JPEG
to another File
the
to
enlarge
page)
zoom
28
photo image.
JPEG Folder 2
>>>
JPEG Folder 3
To rotate
JPEG Folder 4
JPEG Folder 5
picture
JPEG Folder 6
Press v / V
JPEG Folder 7
during showing
JPEG Folder 8
picture
clockwise
or
a
counter clockwise.
To listen to MP3/WMA music
2.
Press v / V to select
a
folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
the v / V buttons
use
the remote to
and press ENTER.
highlight
3.
on
Viewing the file proceeding starts.
While viewing a file, you can press STOP
to the previous menu (PHOTO menu).
Press DISC MENU to
Slide Show
move
to
PLAY.
are
(Normal)
>
Press TITLE to
3.
Press v / V to select
4.
Use B / V to select
STOP is
highlight
the
(Slide Show)
then
Speed options
(Slow).
Press
(Fast),
: >>>
>>
limited
top of the
menu
is
highlighted.
RETURN, information of file is hidden.
Still Picture
1.
2.
player
will
now
file.
pressed.
compatibility
during
player
is
upon the size and number of JPEG
files, it could take a long time for the DVD player
to read the disc's contents. If you don't see an
display
after several
minutes,
some
of
---
slide show.
?
go into PAUSE mode.
show, press PLAY
with this
follows:
as
or
pixels
and burn another disc.
The total number of files and folders
on
the disc
should be less than 650.
press
?
Some discs may be incompatible due to a
different recording format or the condition of disc.
?
Ensure that all the selected files have the
again.
extensions when
?
?
copying
into the CD
".jpg"
layout.
If the files have
rename
File
them
names
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
able to be read
the files
are
Windows
32
photo
menu.
Depending
2048
To return to the slide
PAUSE/STEP
a
PHOTO
the files may be too large
reduce the resolution
of the JPEG files to less than 2M pixels as 2760 x
JPEG
Press PAUSE/STEP
The
display
icon then press ENTER.
starts. The playback will continue until
on-screen
?
types of file in
only the desired music watching picture,
programmed the desired tracks from the "MUSIC"
menu and then proceed as above.
disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
on
the two
To listen to
a
PHOTO word
disc.
same
containing
2.
?
On
the
to MP3/WMA
Tip:
three Slide
and
on
listening
player.
JPEG disc
There
files while
Insert the disc
Playback
Tip:
?
display
music files recorded
to the next page.
press ENTER.
?
can
move
JPEG
Use vVbBto
You
the
or
watching picture
JPEG
1.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
to rotate the
picture
by
shown
Explorer.
".jpg"
extension will not be
this DVD
as
player.
JPEG image
Even
though
files in
DVD VR format Disc
Playing
a
This unit will
play
DVD-R/RW discs recorded
the DVD-Video format that have been
a
?
using
finalized using
Refer to the information in this
contacting
This unit will
play DVD-RW discs recorded using
Recording (VR) format.
Insert
a
disc and close the
menu
appears
on
the TV
When
screen.
the exterior surfaces clean
Do not
ENTER and
playback
Press TITLE to
move
track then press PLAY
or
starts.
to the list
menu.
near
volatile
liquids
such
as
insecticide
the unit.
plastic products in contact
long period of time. since they
or
with the unit for
a
leave marks
the surface.
Cleaning
on
Operation
the unit
To clean the
Note:
Unfinalized DVD-R/RW discs cannot be
played
in this
player.
?
use
Do not leave rubber
?
a
the
save
spray
Press v / V to select
the unit
original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
?
?
service technician.
shipping
Keeping
3.
before
the Unit
Handling
Please
tray. The DVD-VR
DVD-VR
2.
a
chapter
DVD-recorder.
the Video
1.
Maintenance and Service
Some DVD-VR disc
RECORDER.
are
Player
made with CPRM data
does not
by
DVD
support these kinds of
discs.
player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not
or
use
thinner,
strong solvents such
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
What is 'CPRM'?
CPRM is
only
copy protection system (with scramble system)
allowing the recording of 'copy once' broadcast
a
programs. CPRM stands for Content Protection for
Recordable Media.
This
player
is CPRM
compatible,
which
means
that you
record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
can
can
only
be made
on
DVD-RW discs formatted in VR
mode, and CPRM recordings
players
that
are
only be played on
specifically compatible with CPRM.
can
Maintaining
the Unit
The DVD
player is a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
If the
or
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
use.
contact your nearest authorized
service center.
33
Playing
a
DivX Movie Disc
DivX disc
as
this DVD
Using
Insert
1.
a
appears
Player
you
can
disc and close the
on
the TV
play
compatibility
with this
player
is limited
follows:
DivX disc.
?A vailable resolution size of the DivX file is under
tray. The MOVIE
menu
720x576
(W
x
H) pixel.
screen.
?
The file
name
of the DivX subtitle is available
by
56 characters.
MOVIE
0:00:00
List
?
Movie Folder 1
If there is
impossible code to
file, it may be displayed as
display.
"
Movie Folder 2
Movie Folder 3
Movie Folder 4
Movie Folder 5
express in the DivX
mark on the
"
_
Movie Folder 6
Movie Folder 7
?
Movie Folder 8
If the number of the screen frame is
over
30
per 1 second, this unit may not operate
normally.
Press v / V to select
2.
a
folder, and press ENTER.
?
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons
on
the remote to
If you want to view a particular file, press
v / V to highlight a file and press ENTER
PLAY.
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
?
Press DISC MENU to
On
are
called
1-point, 2-point,
is
highlighted.
or
Xvid, have this option.
different levels of GMC
or
3-point
encoding, usually
GMC.
to the next page.
MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
a
CD with
move
encoders, like DivX
There
Tip:
?
audio is
GMC?
MPEG4
Press STOP to exit.
4.
or
If the file is recorded with GMC, the unit
supports only 1-point of the record level.
*
or
interleaved, either video
outputted.
?
press ENTER.
3.
file is not
and
highlight
If the video and audio structure of recorded
Playable
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
?
Sampling frequency: within 8 48 kHz (MP3),
-
within 32
?
Bit
32
34
48kHz
(WMA)
rate: within 8
320kbps (MP3),
192kbps (WMA)
-
-
-
Additional Features-VCR
On Screen
You may
part
Video Doctor
Display
the current time
easily display
or
tape
counter, amount of tape left, day, month, year, day of
programme channel, tape speed and operational mode of your VCR will appear on the TV
screen. If a recording is taking place these On Screen
week,
Displays
will not be recorded onto the
(Self-Diagnosis)
This feature informs you that there is a problem with
your VCR. These error messages will appear on the
TV
screen.
1.
Press i.
Press 1
tape.
or 2
to select Dr.
Press OK.
Press CLK/CNT to
1.
display.
repeatedly
Press CLK/CNT
The
display options.
tape
to
counter and amount of
tape left will appear if there is
2.
a
tape loaded.
After 3 seconds the
majority of the
leaving only the
will clear
Displays
counter and the amount of
Press CLK/CNT
the TV
to
again
the
cycle through
On Screen
all
Pr-12
ACMS
TIME
DATE
SYSTEM
NIC
16:9
4:3
DECODER
OPR
tape
or
the
on
P
SET
R
fOSD
ON
OFF
clock
tape left
remove
REC
screen.
displays
from
VIDEO DOCTOR
HEAD STATUS
screen.
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
Tape
Counter
Memory Stop
The
OK
displayed on the
the time by pressing
CLK/CNT on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
Digital Tape Counter
display window instead of
on
the
can
be
2.
Press
3 or 4
to check
a
problem.
HEAD STATUS
O
PLEASE CLEAN:
Clean your video heads.
tape.
TAPE STATUS
1.
Press CLK/CNT.
O
Press CLEAR to set the counter to 0:00:00.
Press PLAY
or
The
tape counter
in hours, minutes and seconds.
2.
Insert
start
recording.
will display the
Press STOP when
playback
or
actual
play
time
Shows the number of timer
recording
is
O
PR-01 26 10:00~11:00SP
Shows the current status of timer
tape will rewind and automatically stop when
3.
recording.
Press i.
(Child Lock)
The control buttons
switched off
1.
recording.
NEXT TIMER PROGRAMME
the counter returns to 0:00:00.
using
tape with its protection tab in place
O2
Press BACKWARD.
Lock
a
NO. OF TIMER PROGRAMME
complete.
The
NOT RECORDABLE:
on
the front of the unit
that your unit
the remote control.
so
can
only
be
can
be
operated
Press LOCK.
and SAFE will appear in the display window.
None of the buttons on the front of your unit will
work.
If any buttons
on
the front of your unit
SAFE will flicker in the
display
are
window for
pressed
a
few
seconds.
2.
Press LOCK
will
again to switch off the child
disappear in the display window.
lock.
35
Hi-Fi Stereo Sound
System
Your VCR will record and
playback
sound. In addition it has
stereo NICAM
a
2.
Hi-Fi stereo
digital stereo
and playback
1.
Your VCR's NICAM
digital
track of the video
2.
Press AUDIO
the Hi-Fi tracks and the
tape without any separation.
repeatedly
until the desired audio
mode appears.
3.
back Wide-Screen
16:9:
Only
for
format
playing back and recording
recordings (16:9).
The choice is
STEREO, LEFT, RIGHT and
MONO. In BIL NICAM playback the primary language is output on the left channel and the secondary channel is output simultaneously from the
right channel when audio output is set to
STEREO.
The primary language willbe output from both
channels when the audio setting is MONO.
Please note that when adjusting the tracking
control Hi-Fi stereo sound may revert to MONO.
REC
PSET
R
fOSD
ON
OFF
3.
Press i to
To
enjoy
Pr-12
+
16:9
4:3
AUTO
ACMS
DECODER
the
remove
Dr.
16:9
4:3
4:3
16:9
-
i
menus
from the TV
Wide-Screen
connect your VCR to
playback you
the TV using a
Your VCR
16:9
Compatibility
record and
play back wide screen
aspect ratio programmes (16:9). To record a wide
screen format programme successfully the correct
type of wide screen signal must be broadcast by the
can
TV station.
1.
Switch
your VCR.
on
Press i.
Press F
or
G to select 16:9/4:3.
Press OK.
12
REC
PSET
R
fOSD
ON
OFF
36
Pr-12
ACMS
+
16:9
4:3
Pr-12
TIME
DATE
NIC
-
DECODER
SYSTEM
OPR
Dr.
VCR
12
VCR
REC
16:9
4:3
fOSD
OKi
ON
OFF
PSET
R
16:9
4:3
SYS
ACMS
AUTO
+
4:3
16:9
-
DECODER
Dr.
16:9
4:3
i
screen.
must
SCART
cable.
s et
the decoder
We have already described, how to connect a
decoder for pay-TV station as CANAL+ or PREMIERE
on page 10. For the recording of an encoded station
you do not have to control anything. You just select
the station and wait shortly until the decoding will
start.
1.
Press i.
The main
Press F
will appear on the TV screen.
G to select the DECODER.
menu
or
Press OK.
2.
Press D
ON:
or
E to select.
When the decoder is connected to the AV2
socket.
OFF: When another VCR is connected to the AV2
socket.
Wide Screen
Wide-Screen
VCR
12
To
MONO
mono
or
sound decoder allows
tape.
on
AUTO, 4:3
recordings (4:3).
another Hi-Fi VCR.
you to enjoy broadcasts with NICAM sound, as
well as standard stereo, bilingual and mono sound.
The particular type of sound received or that
recorded will be briefly displayed on the TV screen
for a
couple of seconds:
STEREO NICAM
Sound is automatically recorded on the Hi-Fi
stereo and mono tracks of the video tape.
BIL NICAM
Both audio channels will be recorded on the Hi-Fi
stereo tracks. The primary language channel (left)
will be recorded on the mono track of the video
The sound is recorded
to select:
programmes as Wide-Screen and Normal
programmes as normal.
4:3
Only for playing back and recording Normal format
stereo tracks allow you to make audio recordings in
Hi-Fi stereo or bilingual mode from a TV broadcast,
or
repeatedly
Automatically plays
your VCR will have a normal mono audio
track and two VHS Hi-Fi stereo audio tracks. These
system, video disc
E
AUTO:
on
stereo audio
or
16:9.
sound decoder. This allows you to record
the sound in several different ways. Video cassettes
recorded
Press D
3.
Press i to return to
a
TV
picture.
Controlling
Additional Features
Last Scene
This
source, and
power switch of your LG TV with the supplied remote
control.
Memory
memorizes last
player
that is viewed. The last
scene
from the last disc
remains in memory
the disc from the player or switch
scene
if you remove
off the player. If you load
even
memorized, the
scene
is
a
disc that has the
can
control the sound
level, input
You
can
control the sound
level, input
power switch of non-LG TVs as
is listed in the table below, set the
player
manufacturer code.
1.
does not memorize the
player
before
disc if you
to play the disc.
scene
commencing
of
While
holding
down TV POWER
button, press the
in
appears when you leave the DVD
mode for about five minutes.
Stop
Video Mode
2.
the table
(see
below).
Release TV POWER button.
Code numbers of controllable TVs
screen saver
player
for your TV
a
Screen Saver
Setting
If
more
them
than
one
one
at
a
code number is
LG / GoldStar
1
Zenith
1,3,4
Samsung
6,7
Sony
8,9
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
Hitachi
4
video mode.
Note:
flickering
That
discs, the playback picture may be
Dot Crawl is shown
or
means
Vertical
straight
on
interpolation
or
lines.
De-interlace is
not
To
the video
mode, press and hold
change
DISPLAY about 3 seconds during disc playback.
?
Video mode sequence:
MODE1 → MODE2 → MODE3
→
Depending
on
function
the
on
your
TV,
(Default),
TV,
2
all buttons may not
after entering the correct
some or
even
?
If you enter a new code number, the code number
previously entered will be erased.
?
When you replace the batteries of the remote, the code
number you have set may be reset to the default setting.
Set the
MODE1
that works
manufacturer code.
video mode number selected is
displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
new
one
with your TV.
Code Number
With certain
listed, try entering
time until you find the
Manufacturer
The
appropriate
number buttons to select the manufacturer code
switch off the
The
source, and
well. If your TV
scene
recalled.
automatically
You
Note:
This
other TVs with the remote control
appropriate
code number
again.
If you turn off the power, the video mode will return
to initial default state (MODE1).
Detailed
MODE1
al
or
:
The
video
MODE2
:
Description
source
material)
:
material of the DVD video
(film
materi-
is determined from disc information.
Suitable for
playing film based content or video
recorded by the progressive scan method.
based material
MODE3
of each Video Mode
Suitable for
comparatively
playing
video based content with
little motion.
Note:
The video mode
Progressive
setting only
works when the
Scan mode is set to "On"
on
the
setup
menu.
37
Copying
from DVD To VCR
This unit allows you to copy the contents of a DVD to
a VHS tape with a press of the COPY button.
Notes:
Be
sure
setup
to set
Scan" to "Off"
on
the
recorder
With this video recorder you can make recordings
from an external source, such as copying from
another video recorder
protected,
3.
In the
Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
Insert VHS Tape
Insert a blank VHS
following description, this video recorder will be
one used for recording and will be referred to as VCR
B. The other appliance will be used for playback and
will be referred to
videotape
into the VCR deck.
the DVD to VHS Tape
Press the COPY button on the unit front
press the REC/ITR button.
VCR A.
the
panel
panel of
rear
the front
of your unit
your unit.
or
the AV sockets
on
Copy
If the DVD disc
to press the
panel
or
2.
3.
appears, you may need
button manually to begin
menu
Play
Insert the recorded
blank
recording
If you press the REC/ITR
DVD mode.
button, be
Stop the Copy Process
When the DVD is finished
end the copy.
sure
rear
the
rear
of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
this unit in
(Left
4.
playing,
5.
stop the Copy process manually
when the DVD movie ends, or the unit may
and
over
again.
&
To start
Right)
sockets
on
the front of your unit.
press the REC/ITR
VCR A.
recording,
and PLAY
press STOP to
You must
over
the
from EURO AV1 SCART socket
of your unit.
AV 2 for recording from EURO AV2 SCART socket
on
on
and record
a
Press AV until the socket you wish to record from
is displayed. (VCR B)
AV 1 for
Note:
replay
tape into VCR A and
tape into VCR B.
copying.
38
as
VCR A should be connected to the SCART socket
on
The DVD will go into Play mode and the VCR
will go into Record mode.
4.
camcorder.
Note:
attempting to copy is copy
you may not be able to copy the disc.
are
1.
2.
or a
menu.
If the DVD you
1.
"Progressive
from another video
Recording
on
When you want to finish
on both video recorders.
copying,
on
VCR B
press the STOP
Reference
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Country
Choose
a
8373
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Code
ET
Country
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
AR
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
Republic
AF
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
Country
Code
Country
Ethiopia
Fiji
SG
SK
UG
39
Troubleshooting
Check the
following guide
for the
possible
cause
or
VCR do not
problem
a
before
contacting
service.
Cause
Symptom
DVD
work
of
DVD
or
Correction
VCR button is not switched
Refer to page 2.
properly.
properly.
No power.
The power cord is disconnected.
the power cord into the wall
outlet securely.
The power is on, but
the DVD player does
not work.
No disc is inserted.
Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
No
The TV is not set to receive DVD
Select the appropriate video input
mode on the TV so the picture from
the DVD player appears on the TV
picture.
signal output.
Plug
screen.
No sound.
The video cable is not connected
Connect the video cable into the
securely.
securely.
The Progressive Scan is set to "On"
on the setup menu but is connected
to a standard (analog) television.
Set
The equipment connected with the
audio cable is not set to receive DVD
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
signal output.
The audio cables
are
not connected
picture
is poor.
The DVD
not start
player does
playback.
Turn on the equipment connected
with the audio cable.
The
Set the
is set to the
The disc is dirty.
The TV channels are not tuned in
An
unplayable
properly.
disc is inserted.
placed upside
placed
down.
within the
guide.
Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
Clean the disc.
Check tuning, carry out
Place the disc with the
down.
playback
Place the disc on the disc
rectly inside the guide.
The disc is
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
the rating level.
Rating
Remove the obstacle.
The batteries in the remote control
are exhausted.
Replace
Video tape cannot be
inserted.
Is the cassette
Eject
No Hi-Fi sound
Audio mode is not set
No NICAM sound
NICAM mode is not set
properly.
tuning again.
Insert a playable disc. (Check the disc
type and Regional code.)
There is an obstacle in the path of the
remote control and this unit.
does not work
jacks
The power of the equipment connected with the audio cable is turned off.
The disc is not
compartment empty?
properly.
properly.
recording
Video Head Cleaning
Whenever a video cassette is inserted into or ejected from
This should mean that additional head cleaning should not
However dirt accumulating on the head after a long period
blurred or broken up. High quality video cassette tapes will
old or damaged tapes might.
40
Connect the audio cable into the
securely.
The disc is
The remote control
Scan to "Off"
Progressive
(see page 19).
securely.
Digital Audio Output
wrong position.
The
jacks
the
the batteries with
tray
or
side
cor-
change
new ones.
tape in.
Select "STEREO" by repeatedly pressing "AUDIO" on the remote control.
Make
sure
NICAM in the
menu
is set
to AUTO for the station to be recorded.
your VCR the video head is automatically cleaned.
be necessary.
of time can cause the playback picture to become
not normally deposit dirt onto the video head, but
Specification
General
Power
requirements
AC
Power
consumption
19W
Dimensions
Mass
50 Hz
200-240V,
430 X 78.5 X 270
(approx.)
4.2
(approx.)
mm
(w/h/d)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
RF Modulator
UHF 22
(41˚F
to
95˚F)
display tape
68
-
(Adjustable)
System
Laser
Semiconductor
Video Head
laser, wavelength
Double azimuth 6
system
650
heads, helical scanning.
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
OUT connectors
only)
More than 95 dB
(DVD)
(CD)
Inputs (VCR)
Audio
Video
-6.0dBm,
-6.0dBm,
more
than 10 kohms
more
than 47 kohms
1.0
75
Vp-p,
(SCART)
(RCA)
ohms, unbalanced (SCART/RCA)
Outputs (DVD)
VIDEO OUT
1
Vp-p 75 ohms, sync negative
(Y) 1.0 Vp-p 75 ohms, negative
(C) 0.3 Vp-p 75 ohms
S-VIDEO OUT
COMPONENT VIDEO OUT
sync., Mini Din
(Progressive Scan)
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
RGB
0.7
output
4-pin
x
x
1
1
75 ohms
Vp-p,
Audio
output (digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (optical audio)
3 V
Audio
output (analog audio)
2.0 Vrms
(p-p),
75 Ω,
Optical
(1 KHz,
0
dB),
connector
x
1
600 Ω, RCA
jack (L, R)x2/SCART (TO TV)
Outputs (VCR)
Audio
-6.0dBm, less than
Video
1.0Vp-p,
RGB
0.7
output
Design
and
specifications
are
Manufactured under license from
subject
Dolby
to
Vp-p,
change
Laboratories.
75
1 kohms
(SCART)
ohms, unbalanced (SCART)
75 ohms
without notice.
"Dolby",
"Pro
Logic",
and the double-D
symbol
are
trademarks of
Dolby
Laboratories.
"DTS" and "DTS
Digital
Out"
are
trademarks of
Digital
Theater
Systems,
Inc.
41
P/NO
:
3834RV0025N
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement