LG | 72LZ9700 | LG 72LZ9700 Owner’s Manual

OWNER’S MANUAL
LED LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
www.lg.com
Separate purchase
Wall Mounting Bracket
LSW600B
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
This device only works with compatible LG LED LCD TV.
Wireless Media Box
(AN-WL100W)
AV1
AV2
COM1
COM2
RGB
HDMI1
HDMI2
HDMI3
HDMI4
WIRELESS
CONTROL
LR
VIDEO
L(MONO) AUDIO R
LR
B
VIDEO
3
DC IN 12V
OPTICAL DIGITAL
AUDIO OUT
SERVICE ONLY
L(MONO) AUDIO R
2
/ DVI IN
A COMPONENT / AV IN 1
B COMPONENT / AV IN 2
AUDIO IN
RS-232C IN
RGB/DVI
SERVICE ONLY
1
RGB IN (PC)
WIRELESS
OUT
IR BLASTER
A
Wireless LAN for
Broadband/
DLNA Adaptor
(AN-WF100)
IN 4
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
CONTENTS
PREPARATION
EXTERNAL EQUIPMENT SETUP
Antenna Connection.............................................1
Connecting with a Component Cable..................2
Connecting with an HDMI Cable.........................3
Connecting with an HDMI to DVI Cable..............4
Connecting with an RCA Cable...........................5
Connecting with an RF Cable..............................6
Digital Audio Out Setup........................................7
Connecting with a D-sub 15 Pin Cable................8
Usb Setup............................................................8
External Equipment Wireless Connection...........9
Supported Display Resolution............................10
Screen Setup for PC mode................................12
Network Setup....................................................16
WATCHING TV / PROGRAMME
CONTROL
RF Specification of the Magic Motion Remote
Control................................................................26
Registering the Magic Motion Remote Control..26
How to Use the Magic Motion Remote Control.27
Precautions to Take when Using the Magic
Motion Remote Control......................................27
Pointer Menu Options........................................28
Turning on the TV..............................................29
Initializing Setup ................................................29
Programme Selection.........................................29
Volume Adjustment............................................29
Quick Menu........................................................30
CONTENTS
Accessories...................................................... A-1
Front Panel Controls........................................ A-2
Back Panel Information.................................... A-3
Stand Installation.............................................. A-4
Back Cover for Wire Arrangement................... A-4
Swivel Stand.................................................... A-4
Careful Installation Advice................................ A-5
EARTHING....................................................... A-5
Desktop Pedestal Installation........................... A-5
Wall Mount: Horizontal Installation................... A-6
Kensington Security System............................ A-6
Remote Control Key Functions........................ A-7
Magic Motion Remote Control Key Functions... A-9
Home Menu........................................................31
On Screen Menus Selection and Adjustment....32
Auto Programme Tuning....................................34
Manual Programme Tuning................................35
Programme Edit ................................................38
Software Update................................................42
Picture/Sound Test.............................................44
Signal Test..........................................................45
Product/Service Information...............................46
Network Test.......................................................46
Simple Manual...................................................47
Selecting the Programme List............................47
Selecting the Favourite Programme List...........48
Input List.............................................................49
Input Label.........................................................50
Data Service.......................................................51
SIMPLINK...........................................................52
AV Mode.............................................................55
Initializing(Reset to original factory settings).....56
NETCAST
Legal Notice.......................................................57
Netcast Menu.....................................................59
Movie Online......................................................60
Weather info.......................................................62
Photo Album.......................................................63
3D IMAGING
3D TECHNOLOGY............................................64
Viewing 3D Imaging...........................................64
When using 3D Glasses....................................65
3D Imaging viewing range.................................65
Watching 3D Imaging.........................................66
TO USE A USB OR PC DEVICE
Entry Mode.........................................................68
Connection Method............................................69
DLNA..................................................................71
Movie list............................................................75
Photo list.............................................................83
Music list.............................................................90
DivX Registration Code......................................96
Deactivation........................................................97
I
CONTENTS
GAME/SCHEDULE
CONTENTS
Game/Schedule.................................................98
EPG(ELECTRONIC PROGRAMME
GUIDE)(IN DIGITAL MODE)
EPG(Electronic Programme Guide).................103
Extended Description.......................................104
Manual Timer...................................................105
Schedule List....................................................106
MHEG (MULTIMEDIA AND
HYPERMEDIA INFORMATION CODING
EXPERT GROUP)(IN DIGITAL MODE)
Teletext within Digital Service..........................107
Teletext in Digital Service.................................107
Switch on MHEG ............................................108
Select a Programme........................................108
Button Function in Listing Mode......................109
Button Function in NOW/NEXT Mode.............109
PICTURE CONTROL
Picture Size (Aspect Ratio) Control.................110
Picture Wizard..................................................112
Energy Saving.................................................113
Preset Picture Settings....................................114
Manual Picture Adjustment..............................115
Picture Improvement Technology.....................117
Expert Picture Control......................................118
Picture Reset....................................................121
Trumotion.........................................................122
LED Local Dimming.........................................123
Power Indicator................................................124
Mode Setting....................................................125
Demo Mode......................................................126
SOUND & LANGUAGE CONTROL
Auto Volume Leveler........................................127
Clear Voice II....................................................128
Preset Sound Settings-Sound Mode...............129
Sound Setting Adjustment -User Mode...........130
Infinite Sound...................................................130
Balance............................................................131
II
TV Speakers On/ Off Setup.............................132
DTV Audio Setting (in digital mode only).........133
Selecting Digital Audio out...............................134
Audio Reset......................................................135
I/II....................................................................136
- Stereo/Dual Reception (In Analogue Mode Only)..136
- NICAM Reception (In Analogue Mode Only)...137
- Speaker Sound Output Selection..................137
On-Screen Menu Language / Country Selection...138
Language Selection (In digital mode only)......139
TIME SETTING
Clock Setup......................................................141
Auto on/off time setting....................................142
Sleep Timer setting..........................................143
PARENTAL CONTROL / RATINGS
Set Password & Lock System.........................144
Block Programme.............................................145
Parental Control (In Digital Mode only)............146
External Input Blocking....................................147
Key Lock..........................................................148
TELETEXT
Switch on/off ...................................................149
SIMPLE Text....................................................149
TOP Text..........................................................150
FASTEXT.........................................................150
Special Teletext Functions...............................151
APPENDIX
Troubleshooting................................................152
Maintenance.....................................................154
Product Specifications......................................155
IR Codes..........................................................157
External Control Device Setup.........................158
Open Source Software Notice.........................165
PREPARATION
ACCESSORIES
PREPARATION
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
■■ Image shown may differ from your TV.
OK
P
MU
TE
Owner’s Manual
Batteries
(AAA x 2, AA x 2)
Remote Control
x2
Nero MediaHome 4
Essentials CD
Component gender cable
Motion Remote Control,
Strap
x2
AV gender cable
3D Glasses
(AG-S100)
This item is not included for all models.
*L
ightly wipe any stains
or fingerprints on the
surface of the TV with
the polishing cloth.
Polishing Cloth
Polishing cloth for
use on the screen.
x2
Ferrite Core
(This item is not included
for all models.)
Cable Holder
x4
x4
o not use excessive
D
force. This may cause
scratching or discolouration.
M5x35
Power Cord
M4x26
Bolts for stand assembly
Use of ferrite core (This feature is not available for all models.)
The ferrite core can be used to
reduce the electromagnetic
waves in the HDMI to DVI
cable.
/DVI IN
Install the ferrite core as
shown in the following picture.
Please set up the ferrite core 15 cm
away from HDMI/DVI IN cable.
A-1
PREPARATION
FRONT PANEL CONTROLS
NOTE
PREPARATION
►TV
► can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of
brightness of the picture is reduced, and this will reduce the overall running cost.
CAUTION
►►Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or the TV may fall.
►►Do not drag the TV. The floor or the product may be damaged.
■■ Image shown may differ from your TV.
Emitter
It is the part equipped with the
emitter exchanging signal with 3D
glasses.
Please be careful not to
block the screen with objects
or people while watching a
3D Video.
SPEAKER
P
OK
MENU
INPUT
Touch Sensor
• You can use the desired button function by touching.
VOLUME
MENU
PROGRAMME
P
OK
OK
Power/Standby Indicator
(Can be adjusted using the Power
Indicator in the OPTION menu.)
A-2
POWER
INPUT
MENU
INPUT
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Remote Control Sensor
BACK PANEL INFORMATION
USB IN
1
CAUTION
WIRELESS
CONTROL
12
/DVI IN
3
4
11
2
1
10
1
7
2
Power Cord Socket
This TV operates on an AC power. The voltage is indicated on the Specifications page.
(► p.155) Never attempt to operate the TV
on DC power.
LAN
Network connection for Weather info, Photo
Album, Movie Online, etc.
Also used for video, photo and music files on
a local network.
3
RGB IN Input
Connect the output from a PC.
4
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
5
6
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
VIDEO
AUDIO
8
AUDIO
9
IN 1
8
VIDEO
9
COMPO
NENT
6
IN 2
5
AV
4
►►Use a product with the following
thickness for optimal connection
to HDMI cable / USB device.
*A 10 mm
COMPO
NENT
3
AV
2
1
PREPARATION
2
■■ Image shown may differ from your TV.
7
ANTENNA/CABLE IN Input
Connect antenna or cable to this jack.
8
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
9
COMPONENT Input
Connect a component video/audio device to
these jacks.
10
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
11
12
WIRELESS CONTROL
Connect the Wireless Ready Dongle to the
TV to control the external input devices connected to Wireless Media Box wirelessly.
USB IN Input
Connect USB storage device to this jack.
A-3
PREPARATION
STAND INSTALLATION
5
Fix the 4 bolts securely using the holes in
the back of the TV.
PREPARATION
■■ Image shown may differ from your TV.
When assembling the desk type stand, check
whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the
product installation.) If you tighten the bolt with
excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.
1
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
M4 X 26
BACK COVER FOR WIRE
ARRANGEMENT
■■ Image shown may differ from your TV.
1
2
After connecting the cables as necessary,
install Cable Holder as shown and bundle
the cables.
Assemble the parts of the Stand Body with
the Stand Base of the TV.
At this time, tighten the screws that hold the
Stand Body on.
Cable Holder
Stand Body
M5 X 35
3
2
Pull the cable management on the stand
cover and organize cables as shown
below. Then, put it back.
Stand Base
Assemble the TV as shown.
SWIVEL STAND
4
Assemble the parts of the Stand Rear
Cover with the TV.
Stand Rear
Cover
A-4
■■ Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
CAREFUL INSTALLATION
ADVICE
1
1
EARTHING
■■ Ensure that you connect the earth wire to prevent possible electric shock. If grounding
methods are not possible, have a qualified
electrician install a separate circuit breaker.
■■ Do not try to earth the TV by connecting it to
telephone wires, lightening rods or gas pipes.
Power
Supply
2
2
PREPARATION
■■ You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
■■ Position the TV close to the wall to avoid the
possibility of it falling when pushed.
■■ The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
■■ The TV can be installed in various ways such as
on a wall, or on a desktop etc.
■■ The TV is designed to be mounted horizontally.
Circuit
breaker
1
2
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then
bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the
wall. Match the height of the bracket that is
mounted on the wall.
DESKTOP PEDESTAL
INSTALLATION
■■ Image shown may differ from your TV.
For adequate ventilation, leave a space as
shown in the figure below.
10 cm
3
10 cm
3
10 cm
Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes
horizontal between the wall and the product.
NOTE
►When
►
moving the TV undo the cords first.
►Use
►
a platform or cabinet strong and large
enough to support the size and weight of
the TV.
►To
► use the TV safely make sure that the
height of the bracket on the wall and on the
TV is the same.
A-5
PREPARATION
WALL MOUNT: HORIZONTAL KENSINGTON SECURITY
INSTALLATION
SYSTEM
PREPARATION
■■ We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a wall.
■■ We recommend that you purchase a wall mounting bracket which supports VESA standard.
■■ LG recommends that wall mounting be performed by a qualified professional installer.
NOTE
►Should
►
Install wall mount on a solid wall perpendicular to the floor.
►Should
►
use a special wall mount, if you want
to install it to ceiling or slanted wall.
►The
►
surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block.
►Installing
►
screw type and length depends on
the wall mount used. Further information,
refer to the instructions included with the
mount.
►LG
► is not liable for any accidents or damage
to property or TV due to incorrect installation:
- Where a non-compliant VESA wall mount
is used.
- Incorrect fastening of screws to surface
which may cause TV to fall and cause personal injury.
- Not following the recommended Installation
method.
10 cm
10 cm
10 cm
10 cm
Model
A-6
72LZ9***
VESA
(A * B)
600 * 400
Standard
Screw
M8
Quantity
4
■■ This feature is not available for all models.
■■ Image shown may differ from your TV.
he TV is equipped with a Kensington Security
T
System connector on the back panel. Connect
the Kensington Security System cable as shown
below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s
guide provided with the Kensington Security
System.
For further information, contact http://www.kensington.com, the internet homepage of the
Kensington company. Kensington sells security
systems for expensive electronic equipment
such as notebook PCs and LCD projectors.
NOTE
►►The Kensington Security System is an optional
accessory.
►►If the TV feels cold to the touch, there may be a
small “flicker” when it is turned on.
This is normal, there is nothing wrong with TV.
►►Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue
spots. However, they have no adverse effect on
the monitor's performance.
►►Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary distortion
effects on the screen.
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
In Analogue TV and some countries, some remote control keys may not work.
(POWER) Switches the TV on from standby or off to standby.
LIGHT You can turn the light of the remote control button on
or off.
LIGHT
ENERGY AV MODE
ENERGY Adjust the Energy Saving mode of the TV.(► p.113)
SAVING
INPUT
TV/
RAD
AV MODE It helps you select and set images and sounds when
connecting AV devices.(► p.55)
SAVING
1
2 ABC 3 DEF
INPUT External input mode rotate in regular sequence.
(► p.49)
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
LIST
0
Q.VIEW
MARK
3D
DELETE
P
MUTE
MENU
TV/RAD Selects Radio, TV and DTV channel.
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table. (► p.47)
Q.VIEW Returns to the previously viewed programme.
FAV
CHAR/NUM
PREPARATION
■■ Image shown may differ from your TV.
Q.MENU
P
A
G
E
MENU Selects a menu.
Clears all on-screen displays and returns to TV
viewing from any menu.(► p.32)
NETCAST Select the desired NetCast menu source. (► p.57)
(Weather info, Photo Album, Movie Online and
etc.) NetCast menu source can differ by country.
Q. MENU Select the desired quick menu source. (► p.30)
OK
BACK
GUIDE
THUMBSTICK Allows you to navigate the on-screen menus and
(Up/Down/Left/Right) adjust the system settings to your preference.
EXIT
L/R SELECT
TEXT
T.OPT
SUBTITLE
OK Accepts your selection or displays the current
mode.
BACK Allows the user to move return one step in an interactive application or other user interaction function.
GUIDE Shows programme guide. (► p.102)
EXIT Clears all on-screen displays and returns to TV
viewing from any menu.
INFO i
RATIO
Coloured These buttons are used for teletext
buttons (on TELETEXT models only), Programme edit.
L/R SELECT Use this to view the 3D video. (► p.67)
A-7
PREPARATION
VOLUME UP Adjusts the volume. /DOWN
LIGHT
PREPARATION
ENERGY AV MODE
MARK Select the input to apply the Picture Wizard
settings.
Check and un-check programmes in the USB
menu.
INPUT
TV/
RAD
SAVING
1
FAV Displays the selected favourite programme.
2 ABC 3 DEF
CHAR/NUM Shifts the Character or Number for NetCast menu.
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
LIST
0
3D Use this to view the 3D video. (► p.66)
DELETE Deletes the entered character when entering the
character on the screen keyboard.
MUTE Switches the sound on or off.
Q.VIEW
Programme Selects a programme.
UP/DOWN
MARK
FAV
CHAR/NUM
3D
DELETE
P
PAGE UP/ Move from one full set of screen information to the
DOWN next one.
P
A
G
E
MUTE
1
MENU
Q.MENU
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.
(► p.149)
SUBTITLE Recalls your preferred subtitle in digital mode.
OK
BACK
GUIDE
SIMPLINK / Controls SIMPLINK or MY MEDIA menu.
MY MEDIA
Menu
control buttons
EXIT
L/R SELECT
1
TEXT
T.OPT
SUBTITLE
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(► p.52)
INFO i Shows the present screen information.
RATIO Selects your desired Aspect Ratio of picture.
(► p.110)
INFO i
A-8
RATIO
Installing Batteries
■■ Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).
■■ Install two 1.5 V AAA batteries. Do not mix old or used batteries
with new ones.
■■ Close cover.
■■ To remove the batteries, perform the installation actions in reverse.
MAGIC MOTION REMOTE CONTROL KEY FUNCTIONS
PREPARATION
Pointer Blinks the light when operating.
Receiver
POWER Switches the TV on from standby or off to standby.
OK/ Appears the pointer.
HOME MENU
OK
P
MUTE
VOLUME UP Adjusts the volume. /DOWN
Programme Selects a programme.
UP/DOWN
MUTE Switches the sound on or off.
Installing Batteries
■■ When the message "Magic motion
remote control battery is low.
Change the battery." is displayed,
replace the battery.
■■ Open the battery compartment
cover on the back and install the
batteries matching correct polarity (+with +,-with -).
■■ Install two 1.5 V AA batteries. Do
not mix old or used batteries
with new ones.
■■ Close cover.
■■ To remove the batteries, perform
the installation actions in
reverse.
A-9
PREPARATION
PREPARATION
A-10
EXTERNAL EQUIPMENT SETUP
■■ To prevent damage do not connect to the mains outlet until all connections are made between the
devices.
ANTENNA CONNECTION
■■ For optimum picture quality, adjust antenna direction.
■■ An antenna cable and converter are not supplied.
Outdoor
Antenna
(VHF, UHF)
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
RF Coaxial Wire (75 Ω)
EXTERNAL EQUIPMENT SETUP
Wall
Antenna
Socket
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
Antenna
Signal
Amplifier
VHF
■■ In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier
to the antenna as shown above.
■■ If signal needs to be split for two TVs, use an antenna signal splitter for connection.
1
EXTERNAL EQUIPMENT SETUP
1
USB IN
2
■■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting
all equipment.
■■ This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 72LZ9*** models.
■■ Image shown may differ from your TV.
WIRELESS
CONTROL
CONNECTING WITH A COMPONENT CABLE
3
2
1
VIDEO
AUDIO
Select the Component 1 or Component 2
input source using the INPUT button on the
remote control.
AUDIO
4
VIDEO
Turn on the external equipment.
(Refer to the external equipment's manual
for operating instructions.)
COMPO
NENT
3
IN 2
Connect the Audio output of the external
equipment (digital set-top box, DVD, etc.) to
the COMPONENT IN AUDIO jacks on the
TV.
AV
2
COMPO
NENT
Connect the video outputs (Y, PB, PR) of the
external equipment (digital set-top box,
DVD, etc.) to the COMPONENT IN VIDEO
jacks on the TV.
IN 1
1
AV
EXTERNAL EQUIPMENT SETUP
/DVI IN
4
■■ This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you
do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
2
Component Input ports
1
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
2
Component ports on the TV
Y
PB
PR
Video output ports
on DVD player
Y
Y
Y
Y
PB
B-Y
Cb
Pb
PR
R-Y
Cr
Pr
►►HDMI Audio Supported format : Dolby Digital, PCM
DTS Audio format is not supported.
Component
HDMI
480i/576i
480p/576p
720p/1080i
O
O
O
O
X
O
O
O
Turn on the external equipment.
(Refer to the external equipment's manual for
operating instructions.)
3
Select HDMI1, HDMI2 ,HDMI3 or HDMI4 input
source using the INPUT button on the remote
control.
4
2
VIDEO
AUDIO
VIDEO
AUDIO
COMPO
NENT
1
COMPO
NENT
AV
IN 1
AV
IN 2
1
2
3
Connect the HDMI output of the external equipment (digital set-top box, DVD, etc.) to HDMI/
DVI IN 1, HDMI/DVI IN 2 ,HDMI/DVI IN 3 or
HDMI/DVI IN 4 jack on the TV.
/DVI IN
1
WIRELESS
CONTROL
CONNECTING WITH AN HDMI CABLE
2
(24 Hz / 30 Hz / 50 Hz / 60 Hz)
USB IN
(50 Hz / 60 Hz only)
1
1080p
EXTERNAL EQUIPMENT SETUP
Signal
NOTE
►►The TV can receive video and audio signals simultaneously when
using an HDMI cable.
►►If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
►►Check that your HDMI cable is High Speed HDMI Cable. If the HDMI
cables are not High Speed HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
►►The TV set can process audio format of PCM or Dolby Digital, when
connect the external equipment using an HDMI cable.
3
EXTERNAL EQUIPMENT SETUP
3
EXTERNAL EQUIPMENT SETUP
/DVI IN
4
WIRELESS
CONTROL
1
USB IN
2
CONNECTING WITH AN HDMI TO DVI CABLE
AUDIO
VIDEO
AUDIO
COMPO
NENT
VIDEO
COMPO
NENT
AV
IN 1
AV
IN 2
1
2
1
2
or
4
1
Connect the digital set-top box or the DVI output of the PC to HDMI/DVI IN 1, HDMI/DVI IN 2,
HDMI/DVI IN 3 or HDMI/DVI IN 4 jack on the TV.
Install the ferrite core as shown in the picture.
The ferrite core can be used to reduce the electromagnetic waves in the HDMI to DVI cable.
Place the ferrite core close to HDMI/DVI IN jack on the display.
2
Connect the Audio output of the digital set-top box or the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
3
Turn on the digital set-top box or the PC and the TV.
(Refer to the digital set-top box or the PC manual for operating instructions.)
4
Select HDMI1, HDMI2, HDMI3 or HDMI4 input source using the INPUT button on the remote control.
U
1
WIRELESS
CONTROL
4
3
/DVI IN
3
VIDEO
AUDIO
VIDEO
AUDIO
COMPO
NENT
IN 2
AV
COMPO
NENT
Insert a video tape into the VCR and
press PLAY on the VCR.
(Refer to the VCR owner’s manual.)
Or, Operate the corresponding external
equipment.
(Refer to external equipment operating
guide.)
IN 1
2
AV
Connect the AUDIO/VIDEO jacks
between TV and VCR or external
equipment.
EXTERNAL EQUIPMENT SETUP
1
1
2
CONNECTING WITH AN RCA CABLE
1
Select AV1 or AV2 input source using
the INPUT button on the remote control.
NOTE
►If
► you have a mono VCR, connect the audio
cable from the VCR to the AUDIO L/MONO
jack of the TV.
or
Video Game Set
Camcorder
5
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN RF CABLE
■■ To avoid picture noise (interference), allow adequate distance between the VCR and TV.
EXTERNAL EQUIPMENT SETUP
1
Connect the ANT OUT socket of the VCR
to the ANTENNA / CABLE IN socket on
the TV.
2
Connect the antenna cable to the ANT IN
socket of the VCR.
3
1
Press the PLAY button on the VCR and
match the appropriate channel between
the TV and VCR for viewing.
2
Wall Jack
Antenna
6
DIGITAL AUDIO OUT SETUP
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL
DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
Connect one end of an optical cable to the TV
Digital Audio (Optical) Output port.
2
onnect the other end of the optical cable to
C
the digital audio (Optical) input on the audio
equipment.
3
Set the “TV Speaker option - Off ” in the
AUDIO menu.(►p.132). Refer to the external
audio equipment instruction manual for
operation.
1
2
EXTERNAL EQUIPMENT SETUP
1
CAUTION
►►Do not look into the optical output port. Looking at the laser
beam may damage your vision.
NOTE
►►When connecting with external audio equipments, such as
amplifiers or speakers, please turn the TV speakers off.
7
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A D-SUB 15 PIN CABLE
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's
settings.
EXTERNAL EQUIPMENT SETUP
1
Connect the RGB output of the PC to the RGB
IN (PC) jack on the TV.
2
Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
3
Turn on the PC and the TV
1
4
Select RGB input source using the INPUT button on the remote control.
2
USB SETUP
USB IN
2
Connect the USB device to the USB IN 1 or
USB IN 2 jack on the TV.
1
1
WIRELESS
CONTROL
After connecting the USB1 or USB2 jack, you
use the USB function. (► p. 68)
AUDIO
VIDEO
COMPO
NENT
AV
MPO
ENT
8
IN 2
1
2
3
/DVI IN
4
2
1
or
EXTERNAL EQUIPMENT WIRELESS CONNECTION
LG Wireless Media Box
AV1
LR
VIDEO
L(MONO) AUDIO R
COM1
OPTICAL DIGITAL
AUDIO OUT
SERVICE ONLY
RGB
2
1
HDMI1
LR
B
VIDEO
3
DC IN 12V
COM2
L(MONO) AUDIO R
/ DVI IN
HDMI2
HDMI3
A COMPONENT / AV IN 1
B COMPONENT / AV IN 2
RGB IN (PC)
AUDIO IN
RS-232C IN
RGB/DVI
SERVICE ONLY
HDMI4
WIRELESS
IR BLASTER
A
AV2
EXTERNAL EQUIPMENT SETUP
LG TVs with a Wireless Control port support the LG Wireless Media Box, which is sold
separately. When you connect the Wireless Ready Dongle (included with the Wireless Media Box) to the
TV, external devices can be connected to the LG Wireless Media Box and video and audio will be sent to
the TV wirelessly.
After the wireless is connected, press the INPUT button to view the wireless input screen.
Refer to the Wireless Media Box manual for operating instructions.
LG Wireless Ready Dongle
IN 4
1
Connect the WIRELESS CONTROL jack of the Wireless Ready Dongle to the WIRELESS
CONTROL jack on the TV.
2
Connect HDMI OUT jack of the Wireless Ready Dongle to the HDMI1, HDMI2 ,HDMI3 or
HDMI4 jack on the TV.
NOTE
►WIRELESS
►
CONTROL : Wireless Ready Dongle power supply and control usage.
►HDMI
►
: Video/Audio signal is connected in Wireless Ready Dongle.
►When
►
you connect to the Wireless Media Box (Separately sold product), you can watch the external device connected to the Wireless Media Box through wireless connection.
►In
► wireless external output, Real Cinema and Digital Noise Reduction functions are not supported.
9
EXTERNAL EQUIPMENT SETUP
SUPPORTED DISPLAY RESOLUTION
RGB-PC, HDMI-PC mode
EXTERNAL EQUIPMENT SETUP
10
HDMI-DTV mode
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720x400
31,468
70,08
640x480
31,469
59,94
800x600
37,879
60,31
1024x768
48,363
60,00
1280x768
47,78
59,87
1360x768
47,72
59,80
1280x1024
63,981
60,02
66,587
59,93
1920x1080
(RGB-PC)
1920x1080
(HDMI-PC)
67,5
Resolution
720x480
720x576
1280x720
60,00
1920x1080
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
31,469
59,94
31,5
60
31,25
50
37,5
50
44,96
59,94
45
60
33,72
59,94
33,75
60
28,125
50
26,97
23,97
27
24
33,716
29,976
33,75
30,00
56,25
50
67,43
59,94
67,5
60
NOTE
►►Connect the audio cable from the PC to the Audio
input on the TV. (Audio cables are not included with
the TV).
►►If using a sound card, adjust PC sound as required.
►►If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only
one of either RGB or HDMI IN (or HDMI/DVI IN) to
display the PC output on the TV.
►►If the graphic card on the PC does output analogue
and digital RGB simultaneously, set the TV to either
RGB or HDMI; (the other mode is set to Plug and
Play automatically by the TV.)
►►DOS mode may not work depending on the video
card if you use an HDMI to DVI cable.
►►If you use too long an RGB-PC cable, there may be
interference on the screen. We recommend using
under 5m of cable. This provides the best picture
quality.
EXTERNAL EQUIPMENT SETUP
►►Avoid keeping a fixed image on the set’s screen
for prolonged periods of time. The fixed image
may become permanently imprinted on the
screen; use a screen saver when possible.
►►There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution
or change the refresh rate to another rate or
adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of
the PC graphic card.
►►The synchronization input waveform for Horizontal
and Vertical frequencies are separate.
►►We recommend using 1920x1080, 60 Hz for
the PC mode, this should provide the best picture
quality.
►►Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the TV or
the signal cable from the HDMI output port of the
PC to the HDMI IN (or HDMI/DVI IN) port on the
TV.
11
EXTERNAL EQUIPMENT SETUP
SCREEN SETUP FOR PC MODE
Screen Reset
Returns Position, Size and Phase to the factory default settings.
PICTURE
Move
• Sharpness
70
• Colour
60
SCREEN
OK
• Tint
0
R
G
• Colour Temp.
0
W
C
• Advanced Control
: Off
Screen
•• Screen
Prev.
Auto Config.
Position
Size
• Picture Reset
• TruMotion
Move
Resolution
►
EXTERNAL EQUIPMENT SETUP
This function works in the following mode : RGB[PC].
To Set
Yes
No
Phase
Reset
1
2
3
4
5
Select PICTURE.
Select Screen.
Select Reset.
Select Yes.
Run Reset.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
12
Auto Configure (RGB [PC] mode only)
Automatically adjusts the picture position and minimizes image instability. After adjustment, if the
image is still not correct, your TV is functioning properly but needs further adjustment.
PICTURE
Move
• Sharpness
70
• Colour
60
SCREEN
OK
• Tint
0
R
G
• Colour Temp.
0
W
C
• Advanced Control
►
: Off
Screen
•• Screen
Auto Config.
Position
Size
• Picture Reset
• TruMotion
Prev.
Move
Resolution
Auto Config.
Yes
No
EXTERNAL EQUIPMENT SETUP
Auto configure
This function is for automatic adjustment of the screen position, size, and phase The displayed image
will be unstable for a few seconds while the auto configuration is in progress.
Phase
Reset
1
2
3
4
5
Select PICTURE.
Select Screen.
• If the position of the image is still not correct,
try Auto adjustment again.
• If picture needs to be adjusted again after
Auto adjustment in RGB (PC), you can adjust
the Position, Size or Phase.
Select Auto Config..
Select Yes.
Run Auto Config..
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
13
EXTERNAL EQUIPMENT SETUP
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
PICTURE
Move
• Sharpness
70
• Colour
60
SCREEN
OK
Resolution
• Tint
0
R
G
• Colour Temp.
0
W
C
Auto Config.
Position
• Advanced Control
: Off
Screen
•• Screen
Move
Prev.
1024 x 768
1280 x 768
1360 x 768
Size
• Picture Reset
• TruMotion
Phase
►
EXTERNAL EQUIPMENT SETUP
This function works in the following mode: RGB[PC]
Reset
1
2
3
4
Select PICTURE.
Select Screen.
Select Resolution.
Select the desired resolution.
5
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
14
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust
the picture position manually.
PICTURE
Move
• Sharpness
70
• Colour
60
SCREEN
OK
Auto Config.
• Tint
0
R
G
• Colour Temp.
0
W
C
Position
Size
• Picture Reset
2
3
4
Phase
►
: Off
Screen
•• Screen
1
Prev.
Resolution
• Advanced Control
• TruMotion
Move
Reset
EXTERNAL EQUIPMENT SETUP
This function works in the following mode : RGB[PC].
Select PICTURE.
Select Screen.
Select Position, Size or Phase.
Make appropriate adjustments.
5
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
15
EXTERNAL EQUIPMENT SETUP
This feature is not available in all countries.
NETWORK SETUP
Wired Network Connection
This TV can be connected to a local area network (LAN) via the LAN port. After making the physical
connection, the TV needs to be set up for network communication.
EXTERNAL EQUIPMENT SETUP
1
Broadband Modem
Broadband Service
Router
Broadband Modem
Broadband Service
1
Connect the LAN port of the Modem or Router to the LAN port on the TV.
2
Select “Network Setting” in the NETWORK menu.
3
After connecting the LAN port, use the NetCast menu.
For more information about NETCAST setup and troubleshooting, visit http://lgknowledgebase.com. Search for NetCast.
CAUTION
16
►Do
► not connect a modular phone cable to the LAN port.
►Since
►
there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service provider.
Wired Network Setup
If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network
settings to be adjusted.
For detail information, contact your internet provider or router manual.
Move
• Network Status
If you already set
the Network Setting
OK
Network Type
►
•Network
•Network Setting
Setting :: Wired
Wired
: Internet is connected
Previous setting value exists. Do
you want to connect with the
previous setting?
Wired network is recommended
•Legal Notice
Wired
Wireless
OK
Appeared when
wired and wireless
are simultaneously
connected.
Resetting
ꔉ Next
Exit
IP Manual Setting
IP Auto Setting
Network Setting
Network Setting
Network Status
Select the IP setting mode.
IP Mode
Network connecting
Setting
Test
●
IP Address
● Subnet
Mask
●
IP Address
◄ IP Manual Setting ►
255 . 255 . 0 . 0
255 . 255 . 0 . 0
● Subnet
●
Gateway
255 . 255 . 0 . 0
●
Gateway
255 . 255 . 0 . 0
●
DNS Server
255 . 255 . 0 . 0
●
DNS Server
255 . 255 . 0 . 0
Mask
OK
Close
255 . 255 . 0 . 0
OK
Exit
Previous
Exit
Select NETWORK.
2
Select Network Setting.
3
Select Wired.
4
If you already set Network Setting: Select Resetting. The new connection settings
resets the current network settings.
5
Select IP Auto Setting or IP Manual Setting.
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
0
6
IP Mode
255 . 255 . 0 . 0
Previous
1
Insert the IP address.
◄ IP Auto Setting ►
EXTERNAL EQUIPMENT SETUP
NETWORK
When Selecting IP Manual Setting:
IP addresses will need to be input manually.
Select OK.
17
EXTERNAL EQUIPMENT SETUP
■■ This feature requires an always-on broadband internet connection.
■■ You do not need to connect to a PC to use this function.
■■ If Network Setting is not working, check your network conditions. Check the LAN cable and
make sure your router has DHCP turned on if you wish to use the Auto Setting.
■■ If the Network Setting is not completed, network may not operate normally.
EXTERNAL EQUIPMENT SETUP
18
■■ IP Auto Setting: Select it if there is a DHCP server on the local area network (LAN) via wired
connection, the TV will automatically be allocated an IP address. If you’re using a broadband
router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server
function. The IP address will automatically be determined.
■■ IP Manual Setting: Select it if there is no DHCP server on the network and you want to set the IP
address manually.
NOTE
►The use of a “Router” may not be allowed or
its usage may be limited depending on the
policies and restrictions of your ISP. For
details, contact your ISP directly.
►The wireless network operates at 2.4 GHz
radio frequencies that are also used by other
household devices such as cordless telephone, Bluetooth® devices, microwave oven,
and can be affected by interference from
them.It can be interrupted by the device using
5 Ghz radio frequencies. It is same device
with LG wireless media box, cordless telephone, other Wi-Fi device.
►It may decrease the service speed using
Wireless network by surrounding wireless
condition.
►Turn off all unused network equipment in your
local home network. Some devices may generate network traffic.
►In some instances, placing the access point
or wireless router higher up away from the
floor may improve the reception.
►The reception quality over wireless depends
on many factors such as type of the access
point, distance between the TV and access
point, and the location of the TV.
►When
►
connecting internet through the wired/
wireless sharing machine, it may interrupt the
connection because of the use limitation and
confirmation of service company.
►To
► connect wireless AP, an AP that supports
the wireless connection is necessary, and the
wireless connection function of the AP needs
to be activated. Please enquire to the AP
supplier for the possibility of AP wireless connections.
►►Please verify the security settings of AP SSID for
wireless AP connection, and enquire to the AP
supplier for the AP SSID security settings.
►►The TV can become slower or malfunction with
wrong settings of network equipments (wired/wireless router, hub, etc). Please install correctly by
referring to the manual of the equipment, and set
the network.
►When
►
AP is set to include 802.11 n, and if
Encryption is designated as WEP(64/128bit)
or WPA(TKIP/AES), the connection may not
be possible. There may be different connection methods according to the AP manufacturers.
EXTERNAL EQUIPMENT SETUP
►For more information about NetCast setup and
troubleshooting, visit http://lgknowledgebase.
com. Search for NetCast.
►Use a standard LAN cable with this TV. Cat5
or better with a RJ45 connector.
►Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the player
to the home network, quickly power off and/or
disconnect the power cable of the home network router or cable modem. Then power on
and/or connect the power cable again.
►Depending on the internet service provider
(ISP), the number
of devices that can
receive internet service may be limited by the
applicable terms of service. For details, contact your ISP.
►LG is not responsible for any malfunction of
the TV and/or the internet connection feature
due to communication errors/malfunctions
associated with your broadband internet connection, or other connected equipment.
►LG is not responsible for problems within your
internet connection.
►Some content available through the network
connection may not be compatible with the
TV. If you have questions about such content,
please contact the producer of the content.
►You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
►Some internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your broadband Internet connection.
►Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
►A 10 Base-T or 100 Base-TX LAN port is
required for connection to this TV. If your internet service does not allow for such a connection, you will not be able to connect the TV.
►A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with
your ISP, you may not be able to use the
internet connection feature contained in this
TV or you may be limited to the number of
devices you can connect at the same time. (If
your ISP limits sub-scription to one device,
this TV may not be allowed to connect when
a PC is already connected.)
19
EXTERNAL EQUIPMENT SETUP
Wireless Network Connection
The LG Wireless LAN for Broadband/DLNA Adaptor, allows the TV to connect to a wireless lan
network. Please use LG Wireless LAN for Broadband/DLNA Adaptor.
The network configuration and connection method may vary depending on the equipment in use and
the network environment. Refer to the setup instructions supplied with your access point or wireless
router for detailed connection steps and network settings.
VIDEO
AUDIO
VIDEO
AUDIO
COMPO
NENT
COMPO
NENT
AV
IN 1
AV
IN 2
1
2
3
/DVI IN
4
WIRELESS
CONTROL
1
USB IN
2
EXTERNAL EQUIPMENT SETUP
1
Connect the “LG Wireless LAN for Broadband/DLNA Adaptor” to the USB IN 1 or USB IN
2 jack on the TV.
2
Select “Network Setting” in the NETWORK menu. After connecting, you can use the
NetCast menu.
NOTE
►For
►
enjoying pictures, music, or video stored in the PC using the router, the use of wired port in
the router is recommended.
►When
►
the wireless port of the router is used, there may be restrictions for some functions.
20
Wireless Network Setup
Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the network.
NETWORK
Move
If you already set the
Network Setting
Network Type
: Internet is connected
Wired network is recommended
•Legal Notice
Wireless
Appeared when
wired and wireless
are simultaneously
connected.
IP Mode
●
IP Address
● Subnet
Mask
◄ IP Auto Setting ►
●
DNS Server
255 . 255 . 0 . 0
Page 1/1
◄ ►
5
Input the new SSID
iptime
ASW
Network1
Access Point
Search
Connecting with PIN mode
Cancel
ꔉ Next
Exit
Exit
Prev.
Select NETWORK.
Select Network Setting.
Select Wireless.
If you already set Network Setting:
Select Resetting.
The new connection settings resets
the current network settings.
Previous
Exit
6
Scan the all available AP (Access
Point) or wireless routers within range
and display them as a list.
7
Select an AP (Access Point) or
wireless router on the list.
(If your AP is locked, insert the
security key of AP).
8
1
4
Exit
Select AP you want to connect.
Insert 8~63 ASCII characters
OK
OK
3
Previous
Selecting AP
255 . 255 . 0 . 0
255 . 255 . 0 . 0
2
ꔉ Next
Exit
ꔉ Next
255 . 255 . 0 . 0
Gateway
1
Setting Ad-hoc network
Insert the security key of AP.
●
Previous
Setting from the AP list
Simple setting (WPS-button mode)
Resetting
Inserting the security key
Select the IP setting mode.
Select the wireless network setting type
OK
If your AP is locked
Network Setting
Select the wireless network setting type.
Previous setting value exists. Do
you want to connect with the
previous setting?
Wired
EXTERNAL EQUIPMENT SETUP
• Network Status
►
•Network
•Network Setting
Setting :: Wired
Wired
OK
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
Input the security key of AP.
0
9
Repeat step 4-5 on P.17.
Select Setting from the AP list.
21
EXTERNAL EQUIPMENT SETUP
When a security code is already set
PIN (Personal Identification Number)
EXTERNAL EQUIPMENT SETUP
If you want to connect the AP (Access Point) or router with PIN, use this feature.
Selecting AP
Page 1/1
Insert PIN number at the AP webpage and
press ‘Connect’ button.
Input the new SSID
PIN NUMBER : 12345670
iptime
ASW
Network1
Connect
Access Point
Search
For more information, check the AP manual.
ꔉ Next
Connecting with PIN mode
ꔉ Next
Previous
Repeat step 1-6 on P.21.
3
You can see the Network ID and Security Key
on your TV screen.
Enter the PIN number to your device.
4
5
Connect the access point with PIN
mode.
Select Connect.
Repeat step 4-5 on P.17.
Previous
Exit
Exit
1
2
RED
22
Connecting with PIN mode
Select AP you want to connect.
■■ PIN number is the unique 8 digit number
of the dongle.
WPS (Wi-Fi Protected Setup)
Select the wireless network setting type.
Select the wireless network setting type.
Simple setting (WPS-button mode)
Press PBC mode button of AP and press ‘Connect’ button.
Setting from the AP list
Connect
Simple setting (WPS-button mode)
Caution: Check if PBC mode button is available for your AP.
Setting Ad-hoc network
ꔉ Next
ꔉ Next
Previous
1
2
3
4
Exit
Previous
Exit
EXTERNAL EQUIPMENT SETUP
If your access point or wireless router that supports PIN or WPS(Wi-Fi Protected Setup), it’s available
to use your access point or wireless router within 120 counts. You do not need to know the access
point name (SSID: Service Set Identifier) and security code of your access point or wireless router.
Repeat step 1-4 on P.21.
Select Simple setting (WPS-button mode).
Select Connect.
Repeat step 4-5 on P.17.
23
EXTERNAL EQUIPMENT SETUP
Ad-hoc Mode
This is the method of communicating directly with the machine to communicate without AP.
This is the same as connecting two PCs with a cross cable.
Select the wireless network setting type.
Setting Ad-hoc network
Setting Ad-hoc network
Select the wireless network setting type.
Insert the setting informatin into the device.
Features using exiting network can be unavailable. Do you
Setting from the AP list
EXTERNAL EQUIPMENT SETUP
Network ID(SSID) : LGTV10
want to change network connection?
Simple setting (WPS-button mode)
Security Key : 1111111111
OK
Setting Ad-hoc network
Cancel
Previous
Changing the setting information.
ꔉ Next
ꔉ Next
Previous
Exit
Connect
Exit
Previous
Signal Strength
Gateway
●
Mac Address: 00:00:13:64:23:01
IP Address : 10.19.152.115
Subnet Mask: 255.255.254.0
Gateway
: 10.19.152.1
Test
Insert the setting information into the device.
Insert the IP address.
Adhoc network is connected.
(LGTV10)
TV
IP Mode
IP Manual Setting
IP Address
192 . 168 . 0 . 10
● Subnet
Mask
Network ID(SSID) : LGTV10
Security Key : 1111111111
Connecting the Ad-hoc network
255 . 255 . 255 . 0
●
Gateway
192 . 168 . 0 . 1
●
DNS Server
255 . 255 . 0 . 0
Cancel
OK
Close
● Example of the PC setting that
Previous
Exit
● PC Setting
Internet Protocol(TCP/IP) of PC needs to be set
manually.
IP address, Subnet Mask, and default Gateway
can be set with your own discretion.
i.e) IP address: 192.168.0.1 / Subnet Mask:
255.255.255.0 / default Gateway: 192.168.0.10
● TV Setting
Verify IP address and gateway of PC.
Input Gateway address of PC to IP Address, and
IP Address of PC to Gateway, and select OK.
i.e) IP address: 192.168.0.10 / Subnet Mask:
255.255.255.0 / default Gateway: 192.168.0.1
1
2
3
4
Exit
Setting Ad-hoc network
Network Setting
Network Status
Setting
24
ꔉ Next
supports a wireless network
1. Find a wireless network device
in your PC.
2. Select LGTV10 that appears in
the list. (Select the same name
as the network ID that appears
on your TV screen.)
3. Type 1111111111 in the Inserting
the security key dialog.
(Type the security key that
appears on your TV screen.)
Repeat step 1-3 on P.21.
Select Setting Ad-hoc network.
Select OK.
5
6
Select Connect to connect Ad-hoc network.
You can see the Network ID and Security Key on
your TV screen.
Enter this Network ID and Security Key to your
device.If a network may not operate, change the
setting information using the RED button.
Insert the IP address.
Network setting is completed.
Select Close.
Network Status
Network Status
NETWORK
Move
OK
•Network Setting : Wired
: Not connected
: Internet
is connected
Network connecting
•Legal Notice
Setting
Test
Close
Select the wireless network setting type.
Network Setting
Select the wireless network setting type.
Select the IP setting mode.
IP Mode
●
IP Address
● Subnet
Mask
◄ IP Auto Setting ►
255 . 255 . 0 . 0
255 . 255 . 0 . 0
●
Gateway
255 . 255 . 0 . 0
●
DNS Server
255 . 255 . 0 . 0
Setting Ad-hoc network
ꔉ Next
Previous
Exit
Wireless Connection
OK
Previous
Setting from the AP list
Simple setting (WPS-button mode)
EXTERNAL EQUIPMENT SETUP
•• Network
Network Status
Status
Exit
Wired Connection
1
2
3
Select NETWORK.
Select Network Status.
■■ Setting: Return to the network setting
menu or wireless network setting type
menu.
■■ Test: Test the current network status
after setting the network.
■■ Close: Return to the previous menu.
Check the network status.
25
WATCHING
WATCHING
TVTV
/ PROGRAMME
/ PROGRAMME
CONTROL
CONTROL
RF SPECIFICATION OF THE MAGIC MOTION
REMOTE CONTROL
WATCHING TV / PROGRAMME CONTROL
The Magic Motion Remote Control communicates with your TV by using a 2.4 GHz bandwidth radio
frequency (RF).
■■ Output: 1 dBm or lower
■■ Maximum Communication Distance: 10 m in an open space
■■ Bandwidth: 2.4 GHz (2.4035 GHz to 2.4783 GHz)
■■ Transfer Rate: 250 kbps
REGISTERING THE MAGIC MOTION REMOTE
CONTROL
The Magic Motion Remote Control operates by pairing with your TV.
After purchasing an LG TV, register the Magic Motion Remote Control with the TV.
How to Register the Magic Motion Remote Control
To register the Remote Control, press the OK button on the
Remote Control while aiming it at your TV.
How to Re-register the Magic Motion Remote Control after
Registration Failure
Reset the remote control by pressing and holding both the OK
and MUTE buttons for 5 seconds. (Once the reset is complete,
the light on the Pointer RF Receiver blinks.) Then repeat the
above procedure to register the remote control.
26
HOW TO USE THE MAGIC MOTION REMOTE
CONTROL
1
2
Press this button if there is no pointer on your TV screen. The
pointer will then appear on the screen.
If the pointer has not been used for a certain period of time, it will
disappear.
PRECAUTIONS TO TAKE WHEN USING THE MAGIC
MOTION REMOTE CONTROL
■■ Manufacturer and installer cannot provide service
related to human safety as the applicable wireless
device has possibility of electric wave interference.
■■ Use the remote control within the maximum communication distance (10 m). Using the remote control
beyond this distance, or with an object obstructing it,
may cause a communication failure.
■■ A communication failure may occur due to nearby
devices. Electrical devices such as a microwave
oven or wireless LAN product may cause interference, as this will use the same bandwidth (2.4 GHz)
as the Magic Motion Remote Control.
■■ The Magic Motion Remote Control may be damaged
or may malfunction if it is dropped or receives a
heavy impact.
■■ When playing a game using the Magic Motion
Remote Control, hold it securely by wrapping its
strap around your wrist and adjusting the length with
the adjustable ring.
■■ Take care not to bump into nearby furniture or other
people when using the Magic Motion Remote
Control.
WATCHING TV / PROGRAMME CONTROL
You can move the pointer by aiming the Pointer
Receiver of the remote control at your TV then
move it left, right, up or down.
If the pointer does not work properly after clicking
the OK button, leave the remote control for 10
seconds then use it again.
27
WATCHING TV / PROGRAMME CONTROL
POINTER MENU OPTIONS
Simple Manual
Pointer
Exit
Home Menu
Quick Menu
WATCHING TV / PROGRAMME CONTROL
PR
PR
Today
Today
Today
Today
Today
30
30
30
30
30
-------------------------------- ------------------ --------------------- -------------------- ----------------- ---
Programme List
GUIDE
PR
PR
PR
NETCAST
INPUT
MY MEDIA GAME/SCHEDULE
QUICK MENU
Netcast
Screen Remote
•Speed
◄
Normal
►
▶
•Shape
◄
Type A
►
•Size
◄
Medium
►
•Alignment
◄
On
►
Exit
1
2
3
4
28
ide
Gu
TV
Select Home Menu.
Select Pointer.
Make appropriate adjustments.
Select Exit.
■■ Speed: Changes the pointer speed.
■■ Shape: Select the pointer shape.
■■ Size: Changes the pointer size.
■■ Alignment: When Alignment is On,
you can easily align the remote
control's direction with the pointer
on your TV screen by shaking the
remote control left and right. Then,
the pointer automatically moves to
the center of the screen.
TURNING ON THE TV
When your TV is turned on, you will be able to use its features.
1
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
2
In standby mode to turn TV on, press the / I, INPUT or P
button on the TV or press
the POWER, INPUT, P
or NUMBER button on the remote control and the TV will
switch on.
1
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can
adjust the Language(Except for Australia, New Zealand, Singapore, South Africa), Mode
Setting, Power Indicator(Only LED LCD TV models - When you select Home Use from Mode
Setting), Country (Only Australia, New Zealand), Time Zone(Only Australia), Auto Tuning.
Note:
a.If you close without completing the initial setting, the Initial Setting menu can be displayed
again.
b.Press the BACK button to change the current OSD to the previous OSD.
c.For those countries without confirmed DTV broadcasting standards, some DTV features might
not work, depending on the DTV broadcasting environment.(Only DTV)
d."Home Use” mode is the optimal setting for home environments, and is the TV's default
mode.
e."Store Demo" mode is the optimal setting for store environments. If a user modifies image quality
data, “Store Demo” mode initializes the product to the image quality set by us after a certain period
of time.
f.The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the
OPTION menu.
WATCHING TV / PROGRAMME CONTROL
INITIALIZING SETUP
PROGRAMME SELECTION
1
Press the P
or NUMBER buttons to select a programme number.
VOLUME ADJUSTMENT
+ or - button to adjust the volume.
1
Press the
2
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE,
+ , - or AV Mode button.
29
WATCHING TV / PROGRAMME CONTROL
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
WATCHING TV / PROGRAMME CONTROL
Aspect Ratio: Selects your desired picture format.
For Zoom Setting, select 14:9, Zoom and
Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes back to
Q.Menu.
Clear Voice II : By differentiating the human
sound range from others, it helps users listen to human voices better.
Picture Mode : Selects your desired Picture
Mode.
Sound Mode : It is a feature to automatically set the sound combination which it deems
the best for the images being watched.
Selects your desired Sound Mode.
Audio or Audio Language : Selects the
sound output.
Sleep Timer : Sets the sleep timer.
Skip Off/On : Selects the Skip Off/On.
USB Device : Selects “Eject” in order to eject
USB device.
◄
Aspect Ratio
►
Home Menu
Quick Menu
PR
PR
PR
Programme List
16:9
PR
PR
Netcast
Screen Remote
Close
1
Select Quick Menu.
2
Select your desired Source.
3
Select Close.
NOTE
►►Quick Menu can be selected either by pressing the Q.MENU button on a standard remote control,
or by selecting on the Home Menu screen.
30
HOME MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
1
Select Home Menu.
2
Select a menu item.
Pointer
Exit
Quick Menu
PR
PR
ide
Gu
TV
Today
Today
Today
Today
Today
30
30
30
30
30
-------------------------------- ------------------ --------------------- -------------------- ----------------- ---
Programme List
GUIDE
PR
PR
PR
INPUT
NETCAST
MY MEDIA GAME/SCHEDULE QUICK MENU
Netcast
Screen Remote
ide
Gu
TV
--- ---- ---- ---- --- ---
GUIDE
Today
A programme view or recording30of a programme can be scheduled while watching
the Broadcasting Information.
Today
30
--- ---- ---- ---- --- ---
Select the desired input source.
INPUT
WATCHING TV / PROGRAMME CONTROL
Simple Manual
Home Menu
Today
30
Select NETCAST menu option and enjoy Online Service.
NETCAST
Today
30
Used for viewing photos, watching movies and listening to MP3s.
MY MEDIA
Today
30
Allows you to enjoy the games installed on the TV or set the schedule.
GAME/SCHEDULE
Today
30
QUICK MENU is a menu of features which users might use frequently.
QUICK MENU
Simple Manual
Pointer
Exit
You can easily and effectively access the TV information by viewing a simple manual on
the TV.
Set up the Magic Motion Remote Control setting.
Close the Home menu.
31
WATCHING TV / PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
1
2
WATCHING TV / PROGRAMME CONTROL
• Press the RED button, you can check the
Customer Support menu.
• Press the GREEN button, you can check
the Simple Manual menu.
• Press the MENU/EXIT button to return to
normal TV viewing.
• Press the BACK button to move to the previous menu screen.
Display each menu.
Select a menu item.
3
Move to the pop up menu.
NOTE
►It is possible to use Country menu in Australia and New Zealand only.
►It is possible to use Hard of Hearing, Parental Guidance menu in DTV only.
SETUP
● Auto
SETUP
Move
PICTURE
OK
Tuning
● Manual
PICTURE
Tuning
● Programme
Edit
● Aspect
Ratio
● Picture
Wizard
●ꕊ
● Auto
AUDIO
Move
Volume
● Clear
Voice II
: Off
: Off
● Balance
● Sound
Mode
TIME
3
: Standard
L
R
• Backlight
70
• Contrast
100
• Brightness
50
• Sharpness
70
Move
● Off
Time
: Off
● On
Time
: Off
● Sleep
• Infinite Sound : Off
32
: Standard
● Clock
0
• Treble
50
• Bass
50
• Reset
Mode
TIME
OK
: 16:9
Energy Saving : Off
● Picture
AUDIO
Move
Timer
: Off
OK
OK
LOCK
● Set
LOCK
Move
Password
● Lock
System
: Off
OPTION
● Block
● Parental
● Input
Lock
Move
OK
● Language(Language)
● Key
OPTION
OK
Programme
● Country
● Hard
Guidance: Blocking Off
● Power
Block
Indicator
● Factory
: Off
● Set
Reset
ID
● Mode
● IR
: Australia
of Hearing (ꔞ): Off
:1
Setting
: Home Use
Blaster
: Off
NETWORK
Move
Input List
OK
Move
WATCHING TV / PROGRAMME CONTROL
● For further information, refer to the optional
“Wireless Media Box & Wireless Dongle”
manual for operating instructions.
OK
•Network Setting : Wired
NETWORK
• Network Status
: Internet is connected
INPUT
•Legal Notice
Antenna
USB1
USB2
AV1
AV2
Component1
Component2
RGB
HDMI1
HDMI2
HDMI3
HDMI4
Input Label
Exit
■■ Image shown may differ from your TV.
Today
30
MY MEDIA
MY MEDIA
GAME/SCHEDULE
GAME/SCHEDULE
Movie List
Press OK(
Photo List
Sydney
Schedule
SUDOKU
JIGSAW
INVADER
URGENT SURVIVAL
JUMP
HOLE IN ONE
WHACK A MOLE
Music List
)to view the list of photos in the USB or PC.
Option
COOKING BURGER BALLOON HUNTER SAVING CRYSTAL
Exit
Exit
33
WATCHING TV / PROGRAMME CONTROL
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
■■ Image shown may differ from your TV.
Move
● Manual
Tuning
● Programme
SETUP
OK
►
● Auto Tuning
►
WATCHING TV / PROGRAMME CONTROL
SETUP
Edit
Move
● Manual
OK
Antenna
● Auto
Auto Tuning
Tuning
●
Tuning
● Programme
Edit
Antenna
Check your antenna connection. The
previous channel information will be
updated during Auto Tuning.
Automatic Numbering
Start
Close
1
2
3
4
Select SETUP.
Select Auto Tuning.
Select Start.
Run Auto tuning.
• Use NUMBER buttons to input a 4-digit
password in Lock System ‘On’.
• If you wish to keep on auto tuning select
Start using the ꕌꕍ button. Then, press
the OK button. Otherwise select Close.
• Automatic Numbering: Decide whether
to use the programme numbers as sent
by broadcasting stations for tuning.
(Only DTV)
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
34
MANUAL PROGRAMME TUNING
(IN DIGITAL MODE)(ONLY DTV)
Manual Tuning lets you manually add a programme to your programme list.
Move
SETUP
OK
Tuning
● Auto
● Programme
Move
Edit
OK
Tuning
◄
● Manual Tuning
►
● Manual Tuning
►
● Auto
● Programme
Edit
►
DTV
UHF CH.
30
Frequency(kHz)
474000
● Signal Strength
● Signal Quality
50%
50%
Update
Close
1
2
3
4
5
•U
se NUMBER buttons to input a 4-digit
Select SETUP.
password in Lock System ‘On’.
Select Manual Tuning.
WATCHING TV / PROGRAMME CONTROL
SETUP
Select DTV.
Select the desired channel number.
Update.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
35
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING
(IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
■■ Image shown may differ from your TV.
Move
OK
Tuning
● Manual Tuning
● Programme
►
● Auto
►
WATCHING TV / PROGRAMME CONTROL
SETUP
Edit
SETUP
Move
◄
● Auto
● Storage
3
● Manual Tuning
● System
● Programme
BG
● Band
Tuning
Edit
OK
►
TV
V/UHF
● Channel
0
● Fine
◄►
● Search
◄►
● Name
C 02
Store
Close
1
2
3
4
7
Select Manual Tuning.
Select TV.(Only DTV)
or
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
Select V/UHF or Cable.
or
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
0
8
0
5
6
Select SETUP.
Select the desired
channel Storage.
9
Select the desired
channel number.
Commence searching.
Select Store.
Select a TV system.
(Except for Australia)
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
•Use NUMBER buttons to input a 4-digit password in Lock System ‘On’.
•BG : PAL B/G (New Zealand / South Africa / Singapore / Indonesia / Israel / Malaysia / Vietnam / Asia)
DK : PAL D/K (New Zealand / South Africa / Singapore / Indonesia / Israel / Malaysia / Vietnam / Asia)
I : PAL I/II (New Zealand / South Africa / Singapore / Indonesia / Israel / Malaysia / Vietnam / Asia)
B/B : Australia
M : NTSC-M (South Africa / Indonesia / Israel / Malaysia / Vietnam / Asia)
•To store another channel, repeat steps 4 to 9.
36
(IN ANALOGUE MODE)
■■ Image shown may differ from your TV.
◄
SETUP
SETUP
OK
Tuning
● Auto
● Programme
►
● Manual Tuning
►
● Auto
Move
Edit
3
● System
Tuning
● Manual Tuning
● Band
● Programme
● Channel
Edit
►
TV
Move
●
StorageOK
BG
V/UHF
0
● Fine
◄►
● Search
◄►
● Name
C 02
Close
■■Assigning a station name
You can assign a station name with five characters to each programme number.
1
2
3
4
Select SETUP.
5
Select Manual Tuning.
Select TV. (Only DTV)
6
Select Name.
7
Select the position and make
your choice of the second
character, and so on.
You can use an the alphabet
A to Z, the number 0 to 9, +/
-, and blank.
Select Close.
WATCHING TV / PROGRAMME CONTROL
Store
Select Store.
■■Fine Tuning
Normally fine tuning is only necessary if reception is poor.
1
2
3
Select SETUP.
4
Select Manual Tuning.
5
Select TV. (Only DTV)
6
Select Fine.
Fine tune for the best picture
and sound.
Select Store.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
37
WATCHING TV / PROGRAMME CONTROL
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P
ton during TV viewing.
but-
If you wish to select the skipped programme, directly enter the programme number with the NUMBER
buttons or select it in the Programme edit menu.
This function enables you to skip the stored programmes.
■■ Image shown may differ from your TV.
Programme Edit
SETUP
Tuning
● Manual
Tuning
● Programme
Edit
Favourite Group :
Page 1/2
A
RADIO
DTV
OK
►
● Auto
Move
►
WATCHING TV / PROGRAMME CONTROL
You can change the programme number using “Move”function, if “Automatic Numbering” is unchecked
when you start Auto Tuning.(Only DTV)
TV
800 YLE TV1
801 YLE TV2
802 YLE FST
803 YLE24
804 YLE Teema
805 TV4 Stockholm
806 Kanal Lokal
807 CNN
808 TV4
809 TV4 Plus
810 TV400
811 TV4 Film
812 TV4 Fakta
813 MediaCorp HD5
814 SNY_SSU
815 Demo
816 TVE 1
817 TVE 2
818 24H TVE
819 CLAN/50 TVE
820 LA7
▼
Pr. Change
P
1
2
3
4
Page Change
FAV
Favourite Pr.
Q.MENU
Favourite Pr. Group
Previous
Block/Unblock
Skip
Select SETUP.
Select Programme Edit.
Enter the Programme Edit.
Select a programme to be stored or
skipped.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
38
In DTV/Radio Mode (Only DTV)
■■Locking a programme number
1
Select a programme number to be locked.
2
• It can be registered as Lock
programme even when Lock
System is turned Off.
3
YELLOW Release.
■■Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE Turn the programme number to blue.
3
BLUE Release.
• When programmes are to be skipped, the
skipped programme shows in blue and
these programmes will not be selected by
the P ꕌꕍ buttons during TV viewing.
• If you wish to select a skipped programme,
directly enter the programme number with
the NUMBER buttons or select it in the
programme edit or EPG.
WATCHING TV / PROGRAMME CONTROL
YELLOW Lock up the programme.
39
WATCHING TV / PROGRAMME CONTROL
In TV Mode
This function enables you to delete or skip the stored programmes.
You can also move some channels and use other programme numbers.
■■Deleting a programme
1
WATCHING TV / PROGRAMME CONTROL
Select a programme number to be deleted.
2
RED
•T
he selected programme is deleted, all the
following programmes are shifted up one.
Turn the programme number to red.
■■Moving a programme
1
2
GREEN
Select a programme number to be moved.
3
GREEN Release.
Turn the programme number to
green.
■■Locking a programme number
1
Select a programme number to be locked.
2
• It can be registered as Lock
programme even when Lock
System is turned Off.
YELLOW Lock up the programme.
3
YELLOW Release.
■■Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE Turn the programme number to blue.
3
BLUE Release.
40
• When a programme number is skipped it
means that you will be unable to select it
using the P ꕌꕍ button during normal TV
viewing.
• If you wish to select a skipped programme,
directly enter the programme number with
the NUMBER buttons or select it in the
programme edit.
■■Selecting favourite programme
Favorite programmes is a convenient feature that lets you quickly scan up to programmes of your
choice without having to wait for the TV to scan through all the in-between programmes.
1
Select your desired programme.
FAV
3 MARK
FAV
Add corresponding programme to Favourite
list of current Favourite group.
Release.
■■Selecting favourite programme group
1
2
3
Select your desired programme.
Display a pop-up window where
Favourite group can be changed.
Select a Favourite group.
WATCHING TV / PROGRAMME CONTROL
2 MARK
41
WATCHING TV / PROGRAMME CONTROL
SOFTWARE UPDATE
You can update the TV with the latest software to enhance the product operation and/or add new features.
You can update the software by connecting the TV directly to the software update server.
The Software Update function may not work properly depending on your internet environment. In this case, you
can obtain the latest software from the authorized LG Electronics Service Center then update your TV.
WATCHING TV / PROGRAMME CONTROL
Software Update
Software Update
◄ On ►
Picture Test
Sound Test
● Current version
Signal Test
00.00.01
Product/Service Info.
Network Test
Check Update Version
Close
1
2
RED Select Customer Support.
•U
se the Check Update Version to update
the latest software on the Network server
manually.
Select Software Update.
Select On or Off.
• If you select On, a user confirm message box will
be displayed to notify that new software is found.
3
4
Close
Save.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
42
■■When setting “Software Update”
Occasionally, a transmission of
updated digital software information will result in the following
menu on the TV screen.
?
Software update is available.
Would you like to download now?
Yes
No
Software Update
TV is restarted when
download is completed.
Update is completed.
Rebooting now.
◄ On ►
Software downloading progress.
Ver. 00.00.01 ► Ver.00.00.02
4%
Check Update Version
Close
? A new software update is available at
00/00/0 00:00.
Do you want to update the software when
available?
Yes
No
Schedule Update : for scheduled
update stream
When the Software Update menu
is "Off", the message to change
it to "On" appears.
When new Software is available
when connected to Internet, the
following message will be displayed.
WATCHING TV / PROGRAMME CONTROL
Simple Update : for current
update stream
Download starts when "Yes" is
selected.
Download progress status can
be checked from Software
Update menu.
? New software version is ready. Do you
want to update it?
Starting Update
Remind me later
- During Progress of a Software Update, please note the following:
• Power to the TV must not be interrupted.
• After Software Update, you can confirm the updated software version in Software Update menu.
• It may take hours to download the software, so make sure that the power stays on during the download.
<Simple Update, Schedule Update>
• The antenna must not be disconnected.
• The software is downloaded only in Standby mode or in MUX with Software Update Service, and stops
when the power cord is unplugged or when viewing MUX without Software Update Service.
• When you return to Standby mode or MUX with Software Update Service, the software download will
resume from where it stopped.
<Network Update>
• You cannot open NetCast while the software is being updated.
• Do not release the Network connection during Update.
• When there is a new software update when you open NetCast, you will not be able to use NetCast without updating the software.
43
WATCHING TV / PROGRAMME CONTROL
PICTURE/SOUND TEST
This function is a customer support function that can execute picture and sound tests.
Software Update
Picture Test
WATCHING TV / PROGRAMME CONTROL
?
Sound Test
Do you have a problem in this test
screen?
Signal Test
Product/Service Info.
Yes
No
Network Test
Close
1
2
3
RED Select Customer Support.
Select Picture Test or Sound Test.
Select Yes or No.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
44
SIGNAL TEST
(Only DTV)
This function enables you to view information on the Manufacturer, Model/Type and Software Version.
This displays the information and signal strength of the tuned *MUX.
This displays the signal information and service name of the selected MUX.
(*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.))
Manufacturer : LG Electronics Inc.
Model/Type : 72LZ9700-TA
Software Version : V00.00.01
Picture Test
Sound Test
Signal
Signal Test
Test
Product/Service Info.
Ch 30
Ch 34
Network Test
Ch 36
Ch 38
Ch 54
Close
Ch 60
Prev.
1
2
3
4
Popup
MENU
Exit
RED Select Customer Support.
WATCHING TV / PROGRAMME CONTROL
Engineering Diagnostics
Software Update
Select Signal Test.
Display Manufacturer, Model/Type and Software Version.
Display the information of Channel.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
45
WATCHING TV / PROGRAMME CONTROL
PRODUCT/SERVICE INFORMATION
This function is a customer support function that can see product/service information and customer
service center information.
Software Update
Picture Test
Sound Test
Signal Test
Product/Service Info.
WATCHING TV / PROGRAMME CONTROL
Network Test
Close
1
2
3
RED Select Customer Support.
Select Product/Service Info..
Display Model/Type, Software version,
Serial Number, Used time,
• Press the MENU/EXIT button to return to normal TV viewing.
Customer service center
• Press the BACK button to move to the previous menu screen.
and Homepage.
NETWORK TEST
Check the network status.
Network Status
Software Update
Picture Test
Sound Test
Network connecting
Signal Test
Product/Service Info.
Network Test
Close
1
2
3
46
Setting
Test
Close
RED Select Customer Support.
Select Network Test.
Check the network status.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
SIMPLE MANUAL
You can easily and effectively access the TV information by viewing a simple manual on the TV.
During the Simple Manual operation, audio will be muted.
1
3
4
•R
ED : Go to the Index page.
•B
LUE : Play the Simple Manual automatically
or manually.
Select Simple Manual.
Select the part of the manual you
want to see.
Select Exit.
SELECTING THE PROGRAMME LIST
You can check which programmes are stored in the memory by displaying the programme list.
Programme List
Mini Glossary
Home Menu
Page 1/1
1 BBC
Quick Menu
►
Displayed when the
Locked Programme.
WATCHING TV / PROGRAMME CONTROL
2
Select Home Menu.
2 BBC
Programme List
3 BBC
PR
PR
PR
PR
PR
4 BBC
Netcast
5 BBC
A
Screen Remote
Pr.Edit
FAV
1
2
3
Select Programme List.
Select a programme you want to
switch.
Select Exit.
Favourite List
Exit
•Y
ou may find some blue programmes.
These have been set up to be skipped by
auto programming or in the programme
edit mode.
•S
ome programmes with the channel number shown in the programme LIST indicate
there is no station name assigned.
47
WATCHING TV / PROGRAMME CONTROL
SELECTING THE FAVOURITE PROGRAMME LIST
Favourite programmes are a convenient feature that lets you quickly select programmes of your choice
without waiting for the TV to select all the in-between programmes.
Favourite List
Programme List
◄ ►Favourite Pr. Group
◄
1 BBC
PR
PR
Netcast
Group
2 BBC
1 BBC
3 BBC
2 BBC
4 BBC
3 BBC
5 BBC
B
►
►
Programme List
PR
PR
PR
►
Quick Menu
A
Screen Remote
Pr.Reg.
Pr.Edit
FAV
1
2
3
4
5
6
48
Page 1/1
►
WATCHING TV / PROGRAMME CONTROL
Home Menu
Favourite List
Select Programme List.
Select Favourite List.
Select your desired favourite
programme group from A to D.
Select your desired programme.
Select Pr.Reg to register or cancel
the current programme in favourite
programme list.
Select Exit.
Exit
LIST
Programme List
Pr.Edit
Exit
• You can also setup Favourite List in
the SETUP menu - Programme Edit.
(Refer to p. 38)
INPUT LIST
By using TV/RAD button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV mode.(Only DTV)
Simple Manual
Home Menu
Quick Menu
Today
Today
Today
Today
Today
30
30
30
30
30
30
-------------------------------- --------------------- --------------------- -------------------- ----------- ---- ---- ---- ---- --- ---
Programme List
GUIDE
PR
PR
PR
Netcast
Exit
Today
NETCAST
INPUT
MY MEDIA GAME/SCHEDULE QUICK MENU
Screen Remote
Input List
Move
Antenna
USB1
USB2
AV1
AV2
Component1
Component2
RGB
HDMI1
HDMI2
HDMI3
HDMI4
Input Label
1
2
3
4
Select Home Menu.
Select INPUT.
Select the desired input source.
Select Exit.
OK
Exit
WATCHING TV / PROGRAMME CONTROL
PR
PR
ide
Gu
TV
Pointer
•A
ntenna : Select it when watching the TV.
(Only DTV : Select it when watching the
DTV/TV/RADIO.)
• USB : Select it when using USB depends
on connector.
• AV : Select it when watching the VCR or
external equipment.
•C
omponent : Select it when using the
DVD or the Digital set-top box depends on
connector.
•R
GB :Select it when using PC depends on
connector.
•H
DMI : Select it when using DVD, PC or
Digital set-top box depend on connector.
49
WATCHING TV / PROGRAMME CONTROL
INPUT LABEL
Selects a label for each input source.
Simple Manual
Home Menu
Quick Menu
Pointer
ide
Gu
TV
Today
Today
Today
Today
Today
30
30
30
30
30
30
-------------------------------- --------------------- --------------------- -------------------- ----------- --
PR
PR
GUIDE
PR
PR
PR
WATCHING TV / PROGRAMME CONTROL
Netcast
INPUT
NETCAST
MY MEDIA GAME/SCHEDULE QUICK MENU
Screen Remote
Input Label
▼
AV1
◄
►
◄
►
Component1 ◄
►
Component2 ◄
►
RGB
►
AV2
◄
▼
2
3
4
5
Input List
Move
Select Home Menu.
Select INPUT.
Select Input Label.
Select the desired input source and
then select ◄ ► to choose the input
label.
Select Close.
OK
Antenna
USB1
USB2
AV1
AV2
Component1
Component2
RGB
HDMI1
HDMI2
HDMI3
HDMI4
Input Label
Close
1
50
Today
--- ---- ---- ---- --- ---
Programme List
Exit
Exit
•Y
ou can also select the Input label
using the BLUE button on the TV
remote control.
DATA SERVICE
(This menu is enabled only in South Africa, Malaysia. )
This function allow users to choose between MHEG(Digital Teletext) and Teletext if both exist at the same
time.
If only one of them exists, either MHEG or Teletext is enabled regardless of which option you selected.
When this function is in operation, Screen Remote Menu’s number key does not work.
Move
● Hard
● Hard
● Set
Reset
ID
● Mode
MHEG
:: MHEG
Setting
Indicator
● Data Service
● Factory
:1
● Set
: Home Use
● Mode
Reset
ID
Setting
MHEG
MHEGMHEG
:: MHEG
Teletext
►
● Factory
of Hearing (ꔞ): Off
● Power
►
Indicator
OK
►
of Hearing (ꔞ): Off
● Data Service
:1
: Home Use
Select OPTION.
2
Select Data Service.
3
4
OPTION
OK
● Language(Language)
● Power
1
Move
● Language(Language)
WATCHING TV / PROGRAMME CONTROL
OPTION
Select MHEG or Teletext.
Save.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
51
WATCHING TV / PROGRAMME CONTROL
SIMPLINK
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
This TV might not function properly when using it with other products with HDMI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable
without additional cables and settings.
WATCHING TV / PROGRAMME CONTROL
If you do not want to use SIMPLINK function, select “Off”.
In wireless external output, SIMPLINK function is not supported.
Press button to run the selected
function.
PR
PR
PR
PR
PR
1
2
3
4
5
52
Home Menu
ENERGY
SAVING
AV MODE
FAV
Quick Menu
GUIDE
Q.MENU
SIMPLINK
SIMPLINK
Programme List
Close
OK
Netcast
1
2
3
Screen Remote
4
5
6
7
8
9
LIST
0
Q.VIEW
Select Screen Remote.
Select SIMPLINK.
Select On.
Select the desired device.
Select Exit.
ꔉ OK ꕉ Exit
◀◀
Screen Remote
▶▶
On
Watch TV
DISC
VCR
HDD Recorder
Speaker
ꕉ Exit
2
USB IN
1
AUDIO
AUDIO
COMPO
NENT
VIDEO
VIDEO
IN 2
AV
COMPO
NENT
AV
IN 1
1
2
Home Theater
1
Connect the HDMI/DVI IN 1, HDMI/DVI IN 2, HDMI/DVI IN 3 or HDMI/DVI IN 4 terminal on the
back of the TV and the HDMI output terminal of the Home Theater using HDMI cables.
2
Connect the Digital Audio output terminal on the back of the TV and the Digital Audio input
terminal of the Home Theater using optical cables.
3
Select Home Theater in the Speaker menu by pushing the SIMPLINK button.
WATCHING TV / PROGRAMME CONTROL
2
3
/DVI IN
4
WIRELESS
CONTROL
1
Connecting to Home Theater with the SIMPLINK logo.
►► When you select or operate a media device with home theater function, the speaker automatically switches
to home theater speaker (HT speaker).
NOTE
►►Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the terminal (HDMI terminal) of the SIMPLINK
device with the HDMI cable.
►►When you switch the Input source using the INPUT button on the remote control, you can stop the operation of a device controlled by SIMPLINK.
53
WATCHING TV / PROGRAMME CONTROL
SIMPLINK Functions
WATCHING TV / PROGRAMME CONTROL
Disc playback
Control connected AV devices by pressing the
, OK, ►, ▀, l l, ◄◄ and ►► buttons.
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch audio-out
Offers an easy way to switch audio-out.
Sync Power on
When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically
to turn on mode.
* A device, which is connected to the TV through an HDMI cable but does not support SIMPLINK,
does not provide this function.
Note: To operate SIMPLINK, an High Speed HDMI Cable with *CEC function should be used.
(*CEC: Consumer Electronics Control).
SIMPLINK Menu
Press the
1
2
3
4
5
54
button and then OK button to select the desired SIMPLINK source.
TV viewing : Switch to the previous TV programme regardless of the current mode.
DISC playback : Select and play connected
discs.
When multiple discs are available, the device
type of discs are conveniently displayed at
the bottom of the screen.
VCR playback : Play and control the connected VCR.
DD Recordings playback : Play and conH
trol recordings stored in HDD.
udio Out to Home theater/Audio Out to
A
TV: Select Home theater or TV speaker for
Audio Out.
ꔉ OK ꕉ Exit
◀◀
▶▶
On
Selected Device
1
Watch TV
2
DISC
3
VCR
4
HDD Recorder
5
Speaker
When a device is
connected (displayed
in bright colour)
ꕉ Exit
When device is not
connected (displayed in
gray)
AV MODE
You can select the optimal images and sounds when connecting AV devices to external input.
Off
Cinema
Sport
Game
Disables the AV MODE.
Optimizes video and audio for watching movies.
Optimizes video and audio for watching sports events.
Optimizes video and audio for playing games.
Screen Remote
Home Menu
Quick Menu
PR
PR
PR
PR
PR
Programme List
Netcast
Screen Remote
1
2
3
Select Screen Remote.
Select AV MODE.
Select AV MODE repeatedly to select
your desired menu option.
ENERGY
SAVING
AVMODE
MODE
AV
FAV
GUIDE
Q.MENU
SIMPLINK
Close
OK
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
WATCHING TV / PROGRAMME CONTROL
Press button to run the selected
function.
• If you select Cinema in AV mode,
Cinema will be selected both for
Picture Mode and Sound Mode in
PICTURE menu and AUDIO menu
respectively.
• If you select “Off” in AV mode, the picture and image which you initially set
will be selected.
• Press the AV MODE button repeatedly to
select the desired source.
• When playing a video game using
PlayStation or Xbox, it is recommended to
use the Game mode.
• When in Game mode, functions related to
picture quality will be optimized for playing games.
55
WATCHING TV / PROGRAMME CONTROL
INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS)
This function initializes all settings.
But the settings of
Day and
Night of the Picture Mode cannot be initialized.
It is useful to initialize the product or when you move to other city or country.
When the Factory Reset is completed, you must restart the Initializing setup.
When the Lock System menu is "On", the message to enter the password appears.
WATCHING TV / PROGRAMME CONTROL
OPTION
Move
● Language(Language)
● Country
● Country
: Australia
of Hearing (ꔞ): Off
● Power
ID
● Mode
● IR
3
4
Setting
Blaster
OK
: Australia
of Hearing (ꔞ): Off
● Power
:1
Indicator
All user settings and channel settings will
be reset. Still Continue?
● Set ID
:1
: Home Use
● Mode
: Off
● IR
►
►
● Set
● Hard
Indicator
● Factory Reset
2
Move
● Language(Language)
● Hard
1
OPTION
OK
Select OPTION.
● Factory Reset
Setting
Blaster
: Home Use
Yes
: Off
No
• In Lock System "On", if you forget your
password, press '0', '3', '2', '5' on the
remote control handset.
Select Factory Reset.
Select Yes.
Start Factory Reset.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
56
NETCAST
This feature is not available in all countries.
LEGAL NOTICE
Legal Notice
Page 1/3
NETWORK
Move
OK
• Network Status
: Internet is connected
•Legal Notice
Notice
•Legal
►
•Network Setting : Wired
▼
Close
1
2
3
NETCAST
IMPORTANT NOTICE RELATING TO NETWORK SERVICE All content and services
accessible through this device belong to third parties and are protected by copyright, patent,
trademark and/or other intellectual property laws. Such content and services are provided
solely for your personal noncommercial use. You may not use any content or services in a
manner that has not been authorized by the content owner or service provider. Without
limiting the foregoing, unless expressly authorized by the applicable content owner or service
provider, you may not copy, upload, post, transmit, translate, sell, modify, create
derivative works, or distribute in any manner or medium any content or services displayed
through this device.YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT THE DEVICE AND
ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESS OR IMPLIED. LG ELECTRONICS EXPRESSLY DISCLAIMS ALL
WARRANTIES AND CONDITIONS WITH RESPECT TO ANY CONTENT AND SERVICES, EITHER
EXPRESS OR, IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF
MERCHANTABILITY, OF SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE
Select NETWORK.
Select Legal Notice.
Check Legal notice.
• Press the MENU/EXIT button to return to normal TV viewing.
57
NETCAST
IMPORTANT NOTICE RELATING TO NETWORK SERVICES
SERVICE
NETCAST
58
All content and services accessible through this device belong to third parties and are protected by
copyright, patent, trademark and/or other intellectual property laws. Such content and services are
provided solely for your personal noncommercial use. You may not use any content or services in a
manner that has not been authorized by the content owner or service provider. Without limiting the
foregoing, unless expressly authorized by the applicable content owner or service provider, you may
not copy, upload, post, transmit, translate, sell, modify, create derivative works, or distribute in any
manner or medium any content or services displayed through this device.
YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT THE DEVICE AND ALL THIRD PARTY
CONTENT AND SERVICES ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED. LG ELECTRONICS EXPRESSLY DISCLAIMS ALL WARRANTIES
AND CONDITIONS WITH RESPECT TO ANY CONTENT AND SERVICES, EITHER EXPRESS OR,
IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, OF
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT
OF THIRD PARTY RIGHTS. LG DOES NOT GUARANTEE THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE
AVAILABLE THROUGH THIS DEVICE AND DOES NOT WARRANT THAT THE DEVICE OR
SERVICES WILL MEET YOUR REQUIREMENTS, OR THAT OPERATION OF THE DEVICE OR
SERVICES WILL BE UNINTERRUPTED OR ERROR-FREE. UNDER NO CIRCUMSTANCES,
INCLUDING NEGLIGENCE, SHALL LG BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR ANY
OTHER DAMAGES ARISING OUT OF, ANY INFORMATION CONTAINED IN, OR ANY CONTENT
OR SERVICE ACCESSED BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Third party services may be changed, suspended, removed, terminated or interrupted, or access
may be disabled at any time, without notice, and LG makes no representation or warranty that any
content or service will remain available for any period of time. Content and services are transmitted
by third parties by means of networks and transmission facilities over which LG has no control. LG
may impose limits on the use of or access to certain services or content, in any case and without
notice or liability. LG expressly disclaims any responsibility or liability for any change, interruption,
disabling, removal of or suspension of any content or service made available through this device.
LG is neither responsible nor liable for customer service related to the content and services. Any
question or request for service relating to the content or services should be made directly to the
respective content and service providers.
This feature is not available in all countries.
NETCAST MENU
These services are provided by separate Content Provider.
Content can be changed or deleted depending on Content Provider.
All content furnished by the service provider are subject to change at any time including, but not limited
to the removal of content. Should you have any inquiry or problem related to the content, you may refer
to the service provider’s website for the most up-to-date information. Please note that LGE is not responsible for any content provided by the service provider or any changes concerning such content.
Please visit the content providers web site for specific information on their services. (But, some content
manual maybe not provide depending on Content Provider).
NetCast menu source can differ by country.
NETCAST
Home Menu
Quick Menu
Programme List
PR
PR
PR
Weather
info
PR
Netcast
Movie
Online
Photo
Album
Screen Remote
1
Select NetCast.
2
Select NetCast menu option.
Enjoy Online Service.
NOTE
►The videos list searched from the TV may different with the list searched from a web browser on PC.
►The settings of this TV do not affect the Movie Online’s playback quality.
►The playback videos may be paused, stopped or buffering occurring often depending on your broadband
speed.
We recommend a minimum connection speed of 1.5 Mbps. For the best playback condition, a connection
speed of 4.0 Mbps is required. Sometimes your broadband speed varies based on your ISP’s network
conditions. Contact your ISP if you have problems maintaining a fast connection that is reliable, or if you
want to increase your connection speed. Many ISPs offer a variety of broadband speed options.
►►To view the owner’s manual that provided by the Content Provider, visit our website at http://www.lg.com.
►►For service that requires log in, join the applicable service on the website using the PC and log in through
the TV to enjoy various additional functionalities.
►►When you set the city you want with Setup by pressing the red button, the background of NetCast will be
set to the weather of the selected city.
►►You can also select the NetCast using the NETCAST button on the TV remote control.
• Press the RED button to select Weather of area.
• Press the EXIT button to return to normal TV viewing.
59
NETCAST
MOVIE ONLINE
Movie Online is a video sharing website where users can upload, view, and share video clips.
Movie Online Screen Components
1
NETCAST
2
Movie Online menu
Videos list
1
2
RED
Set the option menu.
Return to NetCast menu.
Return to TV viewing.
NOTE
►►When you press the Q.MENU button while the Movie Online video is playing in full mode, you can set the
video options.
60
Movie Online Service menu
NETCAST
● Home: You can watch the popular video in real time.
● Featured: The featured videos list will be displayed.
● Popular: The best rated videos list from Movie Online server will be displayed.
● Most Viewed: The most viewed videos list will be displayed.
● Search: The keypad/keyboard menu will be displayed.
● History: The videos list that you previously played will be displayed. Maximum of 20 videos can be stored.
● Favorites: In sign-in status, this menu will be displayed the videos list that is arranged in the Movie Online server with your account (Some videos may not appear on the Favorites list, even if the
videos are arranged in the server).
● Sign in (Sign Out): Displays the keypad/keyboard menu to sign in or returns to the sign-out status.
Using the remote control
■
Stops the video and displays related videos list.
II
Pause the video while it is playing.
►
Play the selected video.
Skip the playback forward or backward.
RED
Set the option menu.
Return to NetCast menu.
Return to TV viewing.
61
NETCAST
WEATHER INFO
Weather info is the programme to view the weather of the city the user wants.
This function cannot be controlled with the Magic motion remote control.
Please use a common remote control.
When you want to exit this function, use a common remote control.
Weather info Screen Components
1
NETCAST
2
3
Weather info menu
Weather list by city
Corresponding buttons on the
remote control
1
2
3
RED
Change between Celsius and Fahrenheit.
Move the focus to the menu you want.
Select the focused menu.
Return to NetCast menu.
Return to TV viewing.
Weather info Service menu
● Home: The weather of selected city is displayed.
● Favorite City: Frequently checked cities can be registered to check the weather.
NOTE
62
►By
► default, New York, London and Paris are registered and the user can add/delete cities from
Favorite City.
►LG
► is not responsible for the accuracy of the weather forecast.
►Applicable
►
weather information can differ from the actual weather depending on the information
provided by Weather info.
PHOTO ALBUM
Photo Album is an application that appreciates digital image files.
Photo Album Screen Components
1
3
1
NETCAST
2
Photo Album menu
Photos list
Corresponding buttons on the
remote control
2
3
Select the desired photo.
The selected photo file is displayed.
Return to NetCast menu.
Return to TV viewing.
Photo Album Service menu
● Home: The featured photos list will be displayed.
● Friends: You can register users with the pictures you want as friends. You can add up to 10 friends.
● Search: The keypad/keyboard menu will be displayed.
● My Photos: You can view the pictures uploaded to the Web. This function can only be used when
you sign in.
● Sign in (Sign Out): Displays the keypad/keyboard menu to sign in or returns to the sign-out status.
63
3D IMAGING
3D TECHNOLOGY
This TV can display in 3D via 3D broadcasting or when the TV is connected to a compatible device, such as
a Blu-ray 3D Player. You need such a device to watch the TV in 3D. The 3D TV displays two separate pictures
formatted for each eye. The viewer needs to wear 3D glasses in order to see these images in 3D format.
VIEWING 3D IMAGING
WARNING
3D IMAGING
►When viewing 3D images, it is important to watch
the TV from an effective viewing angle and within
the appropriate distance. The appropriate angle is
120°(when the viewing distance is 2m (6.5 ft)) and
distance is 2m – 7m (6.5ft – 22.9ft). If you exceed
this viewing angle or distance, you may not be
able to view the 3D imaging. Further 3D images
may not be displayed if they are viewed whilst you
are lying down.
►If you watch the 3D images too closely or for a
long period of time, it may harm your eyesight. If
you feel any sort of eyestrain stop viewing the 3D
images remove the 3D glasses and rest.
►Watching the TV or playing video games that incorporate 3D images with the 3D glasses for a long
period of time can cause drowsiness, headaches
or fatigue to you and/or your eyes. If you experience any of these symptoms stop viewing the 3D
TV remove the 3D glasses and rest.
►Pregnant woman, seniors, persons with heart
problems or persons who experience frequent
drowsiness should refrain from watching 3D TV.
►Do not use the 3D imaging or 3D glasses whilst walking
or moving around. Using the 3D imaging and glasses
while moving around may result in injuries due to running into objects, tripping and/or falling.
►Some 3D imaging may cause you to duck or dodge
the image displayed in the video. Therefore, it is
best if you do not watch 3D TV near fragile objects
or near any objects that can be knocked over easily.
► Please prevent children under the age of 5 from watching
3D TV. It may affect their vision development.
lepsy when exposed to certain factors, including
flashing lights or image as in TV or video games.
If you or anybody from your family has a history of
epilepsy or seizure, please consult with your doctor before watching 3D TV.
If you experience any dizziness or light headedness, visual transition or altered vision, visual or facial instability, such as eye or muscle twitching, unconscious action, convulsion, loss of conscience,
confusion or disorientation, loss of directional
sense, cramps, or nausea immediately stop watching the 3D imaging and consult a doctor. Parents
should monitor their children, including teenagers,
for these symptoms as they may be more sensitive
to the effects of watching 3D TV.
Risk of photosensitization seizure can be reduced
with the following actions.
- Take frequent breaks from watching 3D TV.
- For those who have vision that is different in
each eye, they should watch the TV after taking
vision correction measures.
- Watch the TV so that your eyes are on the same
level as the 3D screen and refrain from sitting too
closely to the TV
- Do not watch the 3D imaging when tired or sick,
and avoid watching the 3D imaging for a long period of time.
- Do not wear the 3D glasses for any other purpose than viewing 3D imaging on a 3D TV.
- Some viewers may feel disoriented after watching 3D TV. Therefore, after you watch 3D TV,
►Warning for photosensitization seizure:
take a moment to regain awareness of your situ Some viewers may experience a seizure or epiation before moving.
NOTE
►To watch the TV in 3D, you must put on your 3D
glasses. For best results, you should wear LG
Brand 3D glasses. The 3D imaging may not display properly when using another brand of 3D
glasses. Please see the 3D glasses manual for
instructions on how to use the 3D glasses.
►After powering on the TV, a few seconds may be
needed for your TV to calibrate.
► It may take a moment for you to see the 3D imaging if you look away from the TV and then revert
your eyes back to the 3D program.
►The TV may flicker slightly if the 3D imaging is displayed under 3 wavelength lamp fluorescent light
64
(50 Hz - 60 Hz) or magnetic fluorescent lamp (50
Hz - 60 Hz). In such instances, it is recommended
to turn the lights off.
►If there is an obstacle between the TV and the 3D
glasses, the 3D imaging may not display properly.
►Do not use the TV in close proximity to other electronic equipment and IR equipment.
►In Analog TV, 3D Imaging does not work.
►When watching 2D images, it is recommended to
take off the 3D glasses. If you watch 2D images with
the 3D glasses on, you may see distorted images.
WHEN USING 3D GLASSES
►3D glasses are sold separately. Refer to the 3D glasses manual for operating instructions.
►Do not use the 3D glasses to replace your corrective glasses, sunglasses or protective goggles.
►Do not store the 3D glasses in hot or cold locations.
►Do not drop objects onto the 3D glasses. Do not drop or bend the glasses.
►Since the lenses of the 3D glasses are easily scratched, make sure to clean only with a soft cloth.
Shake off any dust before using the cloth since the glasses are easily scratched.
TV size, viewing angle & other circumstances may change the viewing distance and the angle of view.
3D IMAGING
3D IMAGING VIEWING RANGE
TV
Viewing
Distance
Viewing
Angle
2m-7m
2m
2m
60 ◦
60 ◦
120 º
(When the viewing distance is 2 m)
7m
65
3D IMAGING
WATCHING 3D IMAGING
1 Play the video produced in 3D.
Refer to the following for the supported imaging.
Signal
720p
Resolution
Horizontal
Frequency
(kHz)
45
Vertical
Frequency
(Hz)
60
89,9/90
59,94/60
1280x720
1920X1080
3D IMAGING
HDMI
Input
1080p
USB
Input
1080p
50
33,75
28,125
60
50
Top & Bottom, Side by Side
67,50
60
Top & Bottom, Side by Side,
Checker Board,
Single Frame Sequential
56,250
50
Top & Bottom, Side by Side
27
24
53,95/54
23,98/24
33,75
30
33,75
30
1920X1080
1920X1080
DTV
Top & Bottom, Side by Side
HDMI (V. 1.4 with 3D)
Frame Packing
Top & Bottom, Side by Side
HDMI (V. 1.4 with 3D)
Frame Packing
37,5
75
1080i
Playable 3D video format
Top & Bottom, Side by Side,
Checker Board
HDMI (V. 1.4 with 3D)
Frame Packing
Top & Bottom, Side by Side,
Checker Board
Top & Bottom, Side by Side,
Checker Board, MPO(Photo)
Signal
Playable 3D video format
720p, 1080i
Top & Bottom, Side by Side
For 3D video feed that is input in the HDMI (V. 1.4 with 3D) Frame Packing format, it is automatically
switched to 3D.
Media contents and a player need to support HDMI (V. 1.4 with 3D) Frame Packing to play in 3D.
Video, which is input as HDMI (V. 1.4 with 3D) Frame Packing format, is switched into the 3D screen
automatically.
2
Select 3D video.
After selecting the shape as shown in the screen on TV, wear the 3D glasses.
3D
Frame
Sequential
To turn on 3D Mode, select this thumbnail.
3D video
►
66
►
Move
OK
Top & Bottom
• 3D
3D
• 2D
2D
2D video
Exit
Side by Side
Checker Board
video : Select it to view the
imaging.
video : Select it to view the
imaging.
3
Select Left/Right image change.
Power on your 3D glasses and put them on.
Sit 2 meters from TV to enjoy the best 3D
view.
Cancel
OK
Left/Right image change
4
or
3D mode setting
◄
OK
5
Select Left/Right or Right/Left.
Select the screen with 3D video with better visibility.
L/R SELECT
Left/Right
►
End 3D video
If you select the 3D button, you can disable the 3D mode or view the image in 2D mode.
Click the OK button to stop the video being played.
When viewing 3D video
When viewing 2D video
or
2D video
OK
Turn off 2D Mode.
3D video
Cancel
Left/Right image change
OK
Cancel
• Press the 3D button to return to normal TV viewing.
3D IMAGING
Turn off 3D Mode.
NOTE
► If you select 3D mode, "Power indicator" is turned off automatically.
► While watching 3D imaging, you cannot adjust video/audio settings using the menu.
► Some menus may not work while watching the TV in 3D.
►You can only choose "Standard → Cinema → Game" with the AV MODE button on remote control. AV
Mode is set as Standard while playing in 3D.
►If used 3D effect on the 2D source, 3D may not work.
►The 3D imaging mode is disabled automatically when switching DTV channels.
►The screen may not be displayed properly if you view 2D DTV images in 3D imaging mode.
►3D effect can be seen when 3D Mode is selected appropriately for the 3D input signal supplied to the TV.
► Energy Saving is disabled while playing in 3D.
► For MPO files (3D camera files), the 3D imaging mode is enabled automatically.
► If you'd like to play the BGM using *.mpo file(3D camera file), In advance, the contents path for BGM should be set
on full-sized photo view screen which isn't *.mpo file(3D camera file).
► Picture mode is set as Standard, Energy Saving Off if entering to 3D mode.
► To enable the 3D imaging mode, you can also press the OK button on the Magic Motion remote control.
NOTES FOR VIEWING 3D IMAGE WITH 3D BROADCASTING (* In Analog TV, 3D Imaging does not work.)
Disable the 3D imaging mode with the 3D button.
The 3D imaging mode is disabled automatically if
you change the channel.
When switching the 2D image display to the 3D
image display with the 3D button on the remote
control, the overlapped image may be displayed.
ꔛ
If the screen is divided into
left/right or top/bottom when
you change the channel
ꔛ
This channel supports the 3D imaging mode. Select
the 3D imaging type displayed on the screen by
pressing the 3D button on the remote control.
ꔛ
Press the L/R SELECT button on the remote control
and select L/R or R/L, which you find better for viewing 3D images.
If your eyes are sore or the screen looks blurry
while viewing 3D images
ꔛ
67
TO USE A USB OR PC DEVICE
ENTRY MODE
When you connect a USB device, this pop up menu is displayed, automatically.
“POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated.
When the Pop Up menu appears, you can select Music List, Photo List or Movie List in the MY MEDIA menu.
In USB device, you can not add a new folder or delete the existing folder.
After choosing the desired type of media, choose a device to open files from. The options are: USB
device or DLNA.
Simple Manual
Home Menu
Quick Menu
ide
Gu
TV
-- --- ---- --- ---- ---- ---- ---- ---- ---- ---- ----- ---- ---- ---- ----- ---- ----- ---- --- ---
PR
PR
Pointer
Today
Today
Today
Today
GUIDE
Netcast
Today
Today
30 30
30
30
30
30
-- --- --- --- --- ------ --- ------ --- ------ --- --- --
Programme List
PR
PR
PR
INPUT
NETCAST
GAME/SCHEDULE QUICK MENU
MY MEDIA
Screen Remote
TO USE A USB OR PC DEVICE
Please select the device.
USB Label
USB Label
DLNA
MY MEDIA
Movie List
Photo List
Music List
Device Selection
Search
Previous
Search other network device.
1
2
3
4
68
Select Home Menu.
Select MY MEDIA.
Select Movie List, Photo List or
Music List.
Select the desired device.
Exit
CONNECTION METHOD
USB Connection
3
When removing the USB device
Select the USB Device menu before
removing the USB device.
1
VIDEO
AUDIO
VIDEO
AUDIO
COMPO
NENT
COMPO
NENT
AV
IN 1
AV
IN 2
1
2
or
•O
nly photo(JPEG, MPO), music (MP3) and
movie(DAT, MPG, MPEG, VOB, AVI, DIVX,
MP4, MKV, TS, TRP, TP, ASF, WMV) are
supported.
2
3
Select Quick Menu.
Move USB Device.
Select Eject.
TO USE A USB OR PC DEVICE
/DVI IN
4
WIRELESS
CONTROL
1
USB IN
2
1 Connect the USB device to the USB IN 1 or USB IN 2 jack on the TV.
69
TO USE A USB OR PC DEVICE
Precautions when using the USB device
TO USE A USB OR PC DEVICE
70
►►Only a USB storage device is recognizable.
►►If the USB storage device is connected through a USB hub, the device is not recognizable.
►►A USB storage device using an automatic recognition programme may not be recognized.
►►A USB storage device which uses its own driver may not be recognized.
►►The recognition speed of a USB storage device may depend on each device.
►►Please do not turn off the TV or unplug the USB device when the connected USB storage device is working.
When such device is suddenly separated or unplugged, the stored files or the USB storage device may be
damaged.
►►Please do not connect the USB storage device which was artificially maneuvered on the PC. The
device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files, image files or movie files.
►►Please use only a USB storage device which was formatted as a FAT32 file system, NTFS file system
provided with the Windows operating system. In case of a storage device formatted as a different utility
programme which is not supported by Windows, it may not be recognized.
►►Please connect power to a USB storage device(over 0.5 A) which requires an external power supply. If
not, the device may not be recognized.
►►Please connect a USB storage device with the cable offered by the device maker.
►►Some USB storage devices may not be supported or operated smoothly.
►►File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100
English characters.
►►Be sure to back up important files since data stored in a USB memory device may be damaged. We
will not be responsible for any data loss.
►►If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to
connect the external power source. - Please use a power adaptor for an external power source. We do not guarantee an USB cable for an external power source.
►►If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use
up to 4 partitions or USB memory devices.
►►If a USB memory device is connected to a USB multi-card reader, its volume data may not be detected.
►►If the USB memory device does not work properly, disconnect and reconnect it.
►►How fast a USB memory device is detected differs from device to device.
►►If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is
turned on.
►►The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB
memory.
►►Any device with more than the recommended capacity may not work properly.
►►If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on
again to make it work properly.
►►USB storage devices below USB 2.0 are supported as well. But they may not work properly in the
movie list.
►►Maximum of 999 folders or files can be recognized under one folder.
►►The file arrangement of the USB storage device is similar to that of Windows XP and supports up to
100 alphabetical characters.
►►If there are a lot of folders or files all within one folder, the device may not be able to access these
properly.
DLNA
About DLNA
This TV can display and play many types of movie, photo and music files from your DLNA server and
has been certified by DLNA for photos.
The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics,
computing industry and mobile device companies. Digital Living provides consumers with easy sharing
of digital media through a wired or wireless network in the home.
The DLNA certification logo makes it easy to find products that comply with the DLNA Interoperability
Guidelines. This unit complies with DLNA Interoperability Guidelines v1.5. When a PC running DLNA
server software or other DLNA compatible device is connected to this TV, some setting changes of
software or other devices may be required. Please refer to the operating instructions for the software
or device for more information.
Please refer to pages 72 ~ 97 for additional information on supported file types and other instructions.
►The supplied Nero MediaHome 4 Essentials CD-ROM is a customized software edition only for
sharing files and folders to this TV.
►The supplied Nero MediaHome 4 Essentials software does not support following functions:
Transcoding, Remote UI, TV control, Internet services and Apple iTunes
►This manual explains operations with the English version of Nero MediaHome 4 Essentials as
examples. Follow the explanation referring to the actual operations of your language version.
►►If there are a lot of folders or files all within one folder, the device may not be able to access these
properly.
►For the DLNA option, use the Nero MediaHome programme that is provided with the TV. However, we
cannot guarantee that third party programmes will work perfectly.
►You can select a channel while viewing the small preview channel list on your TV screen.
►Check your network settings when the DLNA option does not work properly.
►If there is an abnormal operation or an error occurs in Nero Media Home, the DLNA option may
not work properly. In this case, exit Nero Media Home and restart the programme. You can download the latest version of Nero Media Home by clicking the question mark at the bottom-left of the
programme.
►When the network is unstable, the device may be slower or may need to load during playback.
►When playing a video in DLNA mode, the Multi Audio and Closed Caption features are not supported.
►When selecting Full Screen in DLNA mode, the ratio of the outputted screen may differ from the
original.
►When more than one TV is connected to a single server in DLNA mode, a file may not play properly,
depending on the server performance.
►If the play time information is not provided by the server, it is displayed as "--:--:--."
►When using Movie List, DRM /*.tp /*.trp files in the DLNA server cannot be played.
►DLNA operation may not work properly according to the AP manufacturers.
TO USE A USB OR PC DEVICE
NOTE
71
TO USE A USB OR PC DEVICE
Installing Nero MediaHome 4 Essentials
Nero MediaHome 4 Essentials is easy to use DLNA server software for Windows.
TO USE A USB OR PC DEVICE
72
Requirement PC system before you install Nero MediaHome 4 Essentials
■■ Windows® XP (Service Pack 2 or higher), Windows Vista® (no Service Pack required),
Windows® XP Media Center Edition 2005 (Service Pack 2 or higher), Windows Server® 2003
■■ Windows Vista® 64-bit edition (application runs in 32-bit mode)
■■ Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome standalone
■■ 1.2 GHz Intel® Pentium® III or AMD Sempron™ 2200+ processors
■■ Memory: 256 MB RAM
■■ Graphics card with at least 32 MB video memory, minimum resolution of 800 x 600 pixels, and
16-bit color settings
■■ Windows® Internet Explorer® 6.0 or higher
■■ DirectX® 9.0c revision 30 (August 2006) or higher
■■ Network environment: 100 Mb Ethernet, WLAN (IEEE 802.11 b/g/n) (IEEE 802.11 n: Except for
Russia)
1
Start up your computer, and insert the Nero MediaHome 4 Essentials CD-ROM into your computer’s CD-ROM drive.
An installation wizard will walk you through the quick and uncomplicated installation process.
2
Close all Microsoft Windows programmes and exit any anti-virus software that may be running.
3
Insert the Nero MediaHome 4 Essentials CD-ROM into your computer’s CD-ROM drive.
4
Click Nero MediaHome 4 Essentials. The installation is prepared and the installation wizard
appears.
5
Click the Next button to display the serial number input screen.
Click Next to go to the next step.
6
If you accept all conditions, click I accept the License Conditions check box and click Next.
Installation is not possible without this agreement.
7
Click Typical and click Next. The installation process is started.
8
If you want to take part in the anonymous collection of data, select the check box and click the Next
button.
9
Click the Exit button to complete the installation.
Sharing files and folders
After installing Nero MediaHome, you must add folders you wish to share.
Double-click the Nero MediaHome 4 Essentials icon on the desktop.
2
Click Network icon on the left and define your network name in the Network name field. The
Network name you enter will be recognized by your TV.
3
Click Shares icon on the left.
4
Click Local Folders tab on the Shared screen.
5
Click Add icon to open the Browse Folder window.
6
Select the folder containing the files you want to share. The selected folder is added to the list of
shared folders.
7
Click Start Server icon to start the server.
NOTE
►If the shared folders or files are not displayed on the TV, click the folder on the Local Folders
tab and click Rescan Folder at the More button.
►Visit www.nero.com for more information and software tools.
TO USE A USB OR PC DEVICE
1
73
TO USE A USB OR PC DEVICE
Playing back shared contents
You can display and play movie, photo and music content stored on your computer or other DLNA
media servers.
1
Start the server on your computer or other device that connected on your home network.
2
Select MY MEDIA.
3
Select Movie List, Photo List or Music List.
Select the DLNA.
Depending on the media server, this TV may need to get the permission from
the server.
If you want to re-scan available media server, press blue colour button.
4
TO USE A USB OR PC DEVICE
74
NOTE
►To play the file on the media server, the TV and the media server must be connected to the same
access point.
►Because the compatibility and available playback functions on the MY MEDIA menu are tested
on the bundle DLNA server (Nero MediaHome 4 Essentials) environment, file requirements and
playback functions on the MY MEDIA may differ depending on media servers.
►The file requirements on this page are not always compatible. There may have some restrictions
by file features and media server’s ability.
►Even the files that are not supported can be displayed in photo thumbnail or music thumbnail.
►Movie thumbnail is not supported in DLNA Movie.
►If there is an unplayable music file in the MY MEDIA menu, the TV will skip the file and play next
file.
►The file information indicated on the screen may not always correct for music and movie files in
MY MEDIA menu
►This TV only supports movie subtitle files supplied by Nero MediaHome 4.
►The subtitle file name and movie file name have to be the same and located at the same folder.
►If subtitle files have been added after a directory has been indexed already, the user has to
remove and re-add the folder to the list of shares.
►The playback and operating quality of the MY MEDIA function may be affected by your home network condition.
►The files from removable media such as USB drive, DVD-drive etc. on your media server may not
share properly.
►When playing the Media through DLNA connection, it does not support the DivX file play which is
protected by DRM.
►Up to 200 folders in one folder and 999 including folders and files can be recognized.
►If there are a lot of folders or files all within one folder, the device may not be able to access these
properly.
MOVIE LIST
You can play movie files on a USB storage device.
The movie list is activated once USB is detected. It is used when playing movie files on TV.
Displays the movies in the USB folder and supports Play.
Allows playback of all movies in the folder and user desired files.
It is a movie list that displays folder information and movie file.
The On Screen Display may be different from your TV. Images are an example to assist with the TV
operation.
TO USE A USB OR PC DEVICE
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*/*.flv/*.
avi(motion-jpeg)/*.mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting file
Video format : DivX3.11, DivX4.12, DivX5.x, DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03,
Xvid1.10 beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, JPEG, Sorenson
H.263
Audio format : Dolby Digital, AAC, Mpeg, MP3, LPCM, HEAAC, ADPCM, WMA
Bit rate : within 32 kbps to 320 kbps(MP3)
External Subtitle format : *.smi/*.srt/*.sub(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.txt(TMPlayer)/*.
psb(PowerDivX)
Internal Subtitle format : only, XSUB (It is the subtitle format used in DivX6 files)
• Some user-created subtitles may not work properly.
• Some special characters are not supported in subtitles.
• HTML tags are not supported in subtitles.
• Subtitles in languages other than the supported languages are not available.
• Changing font and colour in subtitles is not supported.
• Subtitles in languages other than one specified are not supported.
• Video files with subtitle files of 1 MB or larger may not be played properly.
• The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the
audio language is changed.
• A damaged movie file may not be played correctly, or some player functions may not be usable.
• Movie files produced with some encoders may not be played correctly.
• If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
• HD videos with a maximum of 1920x1080@25/30P or 1280x720@50/60P are supported, depending on the frame.
• Videos with resolutions higher than 1920X1080@25/30P or 1280x720@50/60P may not work
properly depending on the frame.
• Movie files other than the specified types and formats may not work properly.
• Max bitrate of playable movie file is 20 Mbps.
• We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/AVC.
• DTS Audio codec is not supported.
• A movie file more than 30 GB in file size is not supported for playback.
• A DivX movie file and its subtitle file must be located in the same folder.
• A video file name and its subtitle file name must be identical for it to be displayed.
• Playing a video via a USB connection that doesn’t support high speed may not work properly.
• The movie file encoded by the GMC (Global Motion Compensation) and Qpel (Quarterpel Motion
Estimation) is not supported.
• When you are watching the movie by Movie List function, you can adjust an image by Energy
Saving and AV Mode key on the remote control. User setup for each image mode does not operate.
• Trick Mode does not support other functions than ►► if video files do not have index information.
• When playing video file using network, the Trick mode is limited to 2-times speed.
• Video file names that contain special characters may not be playable.
75
TO USE A USB OR PC DEVICE
Supported DivX file
File Extensions
.asf
.wmv
A/V
Video
Audio
.divx
.avi
Video
TO USE A USB OR PC DEVICE
Video
Audio
.mkv
Profile/Level Support
VC-1 Advanced Profile
Advanced Profile@Level 3
(e.g. 720p60, 1080i60, 1080p30)
Video
Audio
WMA Standard
WMA 9 Professional
DivX3.11
DivX4
DivX5
DivX6
XViD
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
MPEG-4 Part 2
Advanced Simple Profile
(e.g. 720p/1080i)
AAC
AAC-LC and HE-AAC
Global motion
compensation or
quarterpel motion
estimation does
not supported.
Streams using this
syntax are not supported.
H.264 / AVC
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
Most of the MKV
content available is
encoded by the open
source x264 codec.
AAC
AAC-LC and HE-AAC
Dolby Digital
MPEG-2
VC-1
Video
.vob
76
.mpg
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
H.264 / AVC
Video
Audio
Advanced Simple Profile
(e.g. 720p/1080i)
Global motion compensation or quarterpel motion estimation does not
supported. Streams
using this syntax are
not supported.
MPEG-1Layer I, II
MPEG-1 Layer III(MP3)
Dolby Digital
H.264 / AVC
.ts
.trp
.tp
Explanation
Only streams compliant
to SMPTE 421M VC-1
VC-1 Simple and Main Simple Profile@Medium Level (e.g. CIF, QVGA)
standard
are supported.
Profiles
Main Profile@High Level (e.g. 1080p30)
H.264 / AVC
Audio
.mp4
.m4v
Codec
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
Main Profile@High Level(e.g. 720p60, 1080i60)
Simple Profile@Medium Level
Only streams com(e.g. CIF, QVGA)
pliant to SMPTE
Main Profile@High Level
421M VC-1 stand(e.g. 1080p30)
Advanced Profile@Level3
ard are supported.
(e.g. 720p60, 1080i60, 1080p30)
MPEG-1Layer I, II
MPEG-1 Layer III(MP3)
Dolby Digital
AAC
MPEG-1
AAC-LC and HE-AAC
MPEG-2
Main Profile@High Level (e.g. 720p60, 1080i60)
Audio
Dolby Digital
MPEG-1Layer I, II
DVD-LPCM
Video
MPEG-1
Audio
MPEG-1Layer I, II
Main Profile@High Level
(e.g. 720p60, 1080i60)
Only streams compliant
configured properly for
TS, PS or ES
Screen Components
You can also adjust USB in the INPUT menu.
1
2
3
Select Home Menu.
Select MY MEDIA.
Select Movie List.
2
1
1
2
4
5
Page 1/1
Movie List
Drive1
USB1 External
001
002
005
006
Page 1/1
003
004
4
Play
Change Device
To Photo List
Change Numbers
Mark Mode
P
Page Change
Exit
3
• Some files may be displayed
the preview image by icon
only.
5
• Non-supported files are
displayed the preview
image by icon only.
TO USE A USB OR PC DEVICE
3
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on 1
Current page/ total pages of
contents under the folder
focused on 1
• Abnormal files are
displayed in the
form of bitmap.
77
TO USE A USB OR PC DEVICE
Movie Selection
■■When playing movie files
Page 1/1
Movie List
Drive1
USB1 External
001
002
005
Page 1/1
003
004
051. Apple_ ......
02:30:25
006
Play
TO USE A USB OR PC DEVICE
78
1
Change Device
To Photo List
1
2
Change Numbers
3
Mark Mode
P
Exit
4
Select the target folder
or drive.
2
Select the desired
movie title.
3
Page Change
Movie files are played.
1
Change device.
2
Repeatedly to converted to Photo List->Music List.
3
A method to view in 5 large thumbnail or simple list.
4
Convert to Mark Mode.
5
Return to normal TV viewing.
►
Press the PLAY(►) button to return to normal playback.
5
■■When selected movie files are played
Page 1/1
Movie List
Mark Mode
Drive1
USB1 External
Page 1/1
001
002
003
005
006
051. Apple_ ......
02:30:25
004
Mark
Play Marked
1
1
Mark All
Unmark All
2
3
2
Select Mark Mode.
3
4
Page Change
Exit
5
• When one or more movie files are
marked, the marked movies will
be played in sequence.
Select the desired movie title.
4
Select Play Marked.
Marked movie file is played.
1
Play the selected movie file.
Once a movie file finishes playing, the next selected one will be played automatically.
2
Mark all movie files on the screen.
3
Deselect all marked movie files.
4
Exit the Mark Mode.
5
Return to normal TV viewing.
TO USE A USB OR PC DEVICE
Select the target folder or drive.
Exit Mark Mode
P
NOTE
►►In the case of files not supported, a message regarding non-supported file is displayed.
►If
► you select “Yes” from OSD when playing the same file after the movie file has been stopped, it
will restart where it stopped previously.
►If
► continuous series files exist within the folder, the next file will automatically be played.
But, this excludes cases when the Repeat function of Movie List Option is turned “On”
(Refer to p. 81) or when set as Marked Play.
►In
► the case where files are not validated, a message will appear regarding invalid file.
79
TO USE A USB OR PC DEVICE
Using the Movie List function, play
Choose options.
Set Video Play.
Set Video.
Set Audio.
Set 3D video.
◄►
►
■
►
II
01:02:30 / 02:30:25
◄◄ ►►
Q.MENU
2
1
1
Hide
Option
3
Exit
Previous
Close
4
Show the Option menu.
TO USE A USB OR PC DEVICE
2
Select Set Video Play., Set Video., Set Audio. or Set 3D video..
1
( ■ ) : Stop the playing movie file.
( ► ) : Return to normal playback.
( II ) : During playback, select the Pause(II).
■■ Still screen is displayed.
■■ If you do not select anything for 10 minutes after pausing, the TV returns to the
playback state.
■■ Select the Pause(II) and then use the FF(►►) for slow motion.
( ◄◄ / ►► ) :
When playing,
repeatedly, select the REW(◄◄) to speed up ◄◄(x2) -> ◄◄◄(x4) -> ◄◄◄◄(x8)
->◄◄◄◄◄(x16) ->◄◄◄◄◄◄(x32) .
repeatedly, select the FF(►►) to speed up ►►(x2)-> ►►►(x4) -> ►►►►(x8)
->►►►►►(x16) -> ►►►►►►(x32).
■■ Selecting REW(◄◄) / FF(►►) repeatedly increases the fast forward/reverse speed.
2
Select the
3
Hide the menu on the full-sized screen.
■■ To see the menu again on the full-sized screen, press OK button to display.
4
Return to normal TV viewing.
repeatedly to change the brightness of your screen.(Refer to p. 113)
NOTE
80
►Option
►
values changed in Movie List does not affect Photo List and Music List.
►Option
►
value changed in Photo List and Music List are changed likewise in Photo List and
Music List excluding Movie List.
►When
►
replaying the video file after stopping, you can play from where it stopped previously.
■■When you select the Set Video Play,
Set Video Play.
Picture Size
◄
Full
►
Audio Language
◄
1
►
Subtitle Language
◄
On
►
● Language
◄
English
►
● Code Page
◄
Default
►
● Sync
◄
0
►
● Position
◄
0
►
● Size
◄
Normal
►
Repeat
◄
On
►
Previous
Make appropriate adjustments.
Then, select Close.
Subtitle
Language
Support Language
Latin1
English, French, Spanish, Portuguese,
Malaysia, Indonesia
Cyrillic
Russian
Thai
Hebrew
Arabic
Thai
Hebrew
Arab, Parsi, Krudish
Unicode(UTF-16) Vietnamese language
►Picture
►
Size : Selects your desired picture
format during movie play.
►Audio
►
Language : Changes the Language
Group of the audio during movie play. Files
with a single audio track cannot be selected.
►Subtitle
►
Language : Turn on/off the subtitle.
►Language
►
: Activated for SMI subtitle and
can select the language within the subtitle.
►Code
►
page : Can select the font for subtitle. When set to default, same font as general menu will be used.
►Sync
►
: Adjusts the time synchronisation of
the subtitle from -10 secs to +10 secs by
steps of 0.5 secs during movie play.
►Position
►
: Changes the position of the
subtitle either up or down during movie
play.
►Size
►
: Selects your desired Subtitle size
during movie play.
►Repeat
►
: Turn on/off repeat function of
movie playback. When turned on, the file
within the folder will be played back
repeatedly. Even when the repeated playback is turned off, it can run the playback if
the file name is similar to the previous file.
TO USE A USB OR PC DEVICE
1
Close
NOTE
►►Only 10,000 of sync blocks can be supported within the subtitle file.
►►When playing a video, you can adjust the Picture Size by pressing the RATIO button.
81
TO USE A USB OR PC DEVICE
■ When you select the Set Video,
Set Video.
Picture Mode
Standard
◄
►
● Backlight
70
◄
● Contrast
100
◄
● Brightness
50
◄
►
● Colour
60
◄
►
►
● Edge Enhancer
◄
Low
►
● Noise Reduction
◄
Low
►
● Picture Reset
►
Previous
TO USE A USB OR PC DEVICE
1
Close
Make appropriate adjustments.
Then, select Close.
■ When you select the Set Audio,
■ When you select the Set 3D video,
Set Audio.
Sound Mode
◄
Standard
►
Auto Volume
◄
Off
►
Clear Voice II
◄
Off
►
Balance
Previous
1
82
0
◄
L
R ►
Power on your 3D glasses and put them on.
Sit 2 meters from TV to enjoy the best 3D
view.
OK
Cancel
Left/Right image change
Close
Make appropriate adjustments.
Then, select Close.
For more information, see the 3D Imaging section in the Owner's Manual.
PHOTO LIST
You can view photo files on USB or PC storage device.
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
When you are watching the photo by the Photo List function, you can not change the picture mode.
PHOTO(*.JPEG) supporting file
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
• You can play JPEG files only.
• Non-supported files are displayed in the form of predefined icon.
• An error message occurs for corrupted files or file formats that cannot be played.
• Corrupted image files may not be displayed properly.
• It may take some time to view high-resolution images in full screen.
File
Extensions
Profile
SOF0: baseline
SOF1: Extend Sequential
SOF2: Progressive
Min: 64 x 64
Max - Normal Type: 15360 (W) x 8640 (H)
Progressive Type: 1920 (W) x 1440 (H)
mpo
4:3 size: 3,648 x 2,736
2,592 x 1,944
2,048 x 1,536
3:2 size: 3,648 x 2,432
supproted file format
jpeg
jpg
jpe
photo size
supproted file format
3D
mpo
photo size
Screen Components
You can also adjust USB in the INPUT menu.
1
2
3
1
2
3
4
5
TO USE A USB OR PC DEVICE
2D
Item
Select Home Menu.
Select MY MEDIA.
2
1
Select Photo List.
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on 1
Current page/ total pages of
contents under the folder
focused on 1
Page 1/1
Photo List
Drive1
USB1 External
001
002
010
011
Page 1/1
003
004
005
006
012
013
014
015
008
007
To Music List
Change Numbers
3
009
4
View
Change Device
5
Mark Mode
P
Page Change
Exit
83
TO USE A USB OR PC DEVICE
■■When playing photo files
Page 1/1
Photo List
Drive1
USB1 External
001
002
010
011
Page 1/1
003
004
005
006
012
013
014
015
007
008
View
Change Device
1
TO USE A USB OR PC DEVICE
84
1
To Music List
Change Numbers
2
3
Mark Mode
009
P
Page Change
Exit
4
Select the target folder or
drive.
2
Select the desired photos.
3
Photo files are displayed.
1
Change device.
2
Repeatedly to converted to Music List->Movie List.
3
A method to view in 5 large thumbnail or simple list.
4
Convert to Mark Mode.
5
Return to normal TV viewing.
5
■■When selected photo files are displayed
Page 1/1
Photo List
Mark Mode
Drive1
USB1 External
001
002
010
011
Page 1/1
003
004
005
006
012
013
014
015
007
008
Mark
View Marked
Mark All
1
2
3
Select the target folder or drive.
2
Select Mark Mode.
3
Select the desired photo files.
4
Select View Marked.
Marked photo file is displayed.
1
Display the selected photo file.
2
Mark all photo files on the screen.
3
Deselect all marked photo files.
4
Exit the Mark Mode.
5
Return to normal TV viewing.
Exit Mark Mode
4
P
Page Change
Exit
5
• When one or more photos are marked, you
can view each marked photo or a slide
show of the marked photos. If no photos are
marked, you can view every individual photo
in the folder or a slide show of all photos in
the folder.
TO USE A USB OR PC DEVICE
1
Unmark All
009
85
TO USE A USB OR PC DEVICE
How to view photo
Detailed operations are available on full-sized photo view screen.
Page 1/1
Photo List
Drive1
USB1 External
001
002
010
011
Page 1/1
003
004
005
006
012
013
014
015
008
007
View
To Music List
Change Device
Page Change
Exit
TO USE A USB OR PC DEVICE
01_a.jpg
2008/12/10
1920 x 1080
479 KB
◄
►
The aspect ratio of a photo may change the size
of the photo displayed on the screen in full size.
◄
Slideshow
1
2
3
86
P
Mark Mode
Change Numbers
009
►
BGM
■
2/13
►
Q.MENU
Option
Select the target folder or drive.
Select the desired photos.
The selected photo is displayed in full
size.
Hide
Exit
4
01_a.jpg
2008/12/10
1920 x 1080
479 KB
Select the
Slideshow,
BGM, � (Rotate),
◄
►
◄
Slideshow
►
BGM
2/13
■
►
Q.MENU
Option
Hide
Exit
►►BGM (Background Music) : Listen to music while viewing photos in full size.
■ Set the BGM device and album in Options before using
this function.
■ You can adjust Option by Q.MENU or MENU button on
the remote control.
►► � (Rotate) : Rotate photos.
■ Rotates the photo 90°, 180°, 270°, 360° clockwise.
■ It can not be rotate when the width of a picture is bigger
than supported height.
: View the photo in full mode or original mode.
TO USE A USB OR PC DEVICE
►►Slideshow : When no picture is selected, all photos in the current folder are displayed during slide show. If some photos are
selected, those photos are displayed in a slide show.
■ Set the time interval of the slide show in O
ption.
►► /
/ ,
,
Option, Hide or
Exit.
►►
: Press the ENERGY SAVING button repeatedly to
change the brightness of your screen.(Refer to p. 113)
►►Option : Set values for Slide Speed and BGM.
■ You cannot change BGM while BGM is playing.
■ You can only select the MP3 folder saved on the device
that currently displays the photo.
►►Hide : Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen, press
OK button to display.
►►Exit : Go back to Photo List.
87
TO USE A USB OR PC DEVICE
Using the Photo List function
01_a.jpg
2008/12/10
1920 x 1080
479 KB
Choose options.
Set Photo View.
◄
►
Set Video.
Set Audio.
Set 3D video.
Previous
◄
Slideshow
►
BGM
1
2/13
►
Q.MENU
■
Option
Hide
Exit
Show the Option menu.
TO USE A USB OR PC DEVICE
2
Select Set Photo View., Set Video.,
Set Audio. or Set 3D video..
NOTE
►►Option values changed in Movie List does not affect Photo List and Music List.
►►Option value changed in Photo List and Music List are changed likewise in Photo List and Music List
excluding Movie List.
►►You cannot select the Option in 3D imaging mode.
►►If you want to listen to BGM (background music) while viewing *mpo image files, play a *jpg file and set the
BGM folder in "Option - Set Photo View." Then, you can select and listen to BGM when viewing *mpo files.
■■When you select the Set Photo View,
Set Photo View.
Slide Speed
◄
BGM
1
Fast
►
Drive1
● Repeat
◄
On
►
● Random
◄
Off
►
Previous
88
Close
Close
Make appropriate adjustments.
Then, select Close.
■ When you select the Set video,
Set Video.
Picture Mode
◄
Standard
►
● Backlight
70
◄
● Contrast
100
◄
● Brightness
50
◄
►
● Colour
60
◄
►
►
● Edge Enhancer
◄
Low
►
● Noise Reduction
◄
Low
►
● Picture Reset
►
Previous
Close
Make appropriate adjustments.
Then, select Close.
■ When you select the Set Audio,
Power on your 3D glasses and put them on.
Sit 2 meters from TV to enjoy the best 3D
view.
Set Audio.
Sound Mode
◄
Standard
►
Auto Volume
◄
Off
►
Clear Voice II
◄
Off
►
Balance
Previous
1
■ When you select the Set 3D video,
TO USE A USB OR PC DEVICE
1
0
◄
L
OK
Cancel
Left/Right image change
R ►
Close
Make appropriate adjustments.
Then, select Close.
For more information, see the 3D Imaging section
in the Owner's Manual.
89
TO USE A USB OR PC DEVICE
MUSIC LIST
You can play music files on USB storage device.
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be
supported by this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your TV. Images are an example to assist with the TV
operation.
MUSIC (*.MP3) supporting file
Bit rate 32 to 320
• Sampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz, 48 kHz
• Sampling rate MPEG2 Layer3 : 16 kHz, 22.05 kHz, 24 kHz
Screen Components
TO USE A USB OR PC DEVICE
You can also adjust USB in the INPUT menu.
1
2
3
Select MY MEDIA.
Select Music List.
3
2
1
2
3
4
5
6
90
Select Home Menu.
Preview: If any album jacket
for the file(Album Art Image)
exists, this jacket is displayed.
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on 2
Current page/ total pages of
contents under the folder
focused on 2
Page 1/1
Music List
USB1 External
1
Drive1
001. - B01.mp3
00:00
002. -B02.mp3
00:00
Page 1/1
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
5
Play
Change Device
6
To Movie List
Change Numbers
4
Mark Mode
P
Page Change
Exit
Music Selection
Page 1/1
Music List
Drive1
USB1 External
001. - B01.mp3
00:00
002. -B02.mp3
00:00
Page 1/1
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Play
Change Device
To Movie List
1
2
Change Numbers
3
Mark Mode
4
P
Page Change
Exit
5
1
Select the target folder
or drive.
2
Select the desired
music title.
3
Music files are played.
1
Change device.
2
Repeatedly to converted to Movie List->Photo List.
3
A method to view in 5 large thumbnail or simple list.
4
Convert to Mark Mode.
5
Return to normal TV viewing.
TO USE A USB OR PC DEVICE
■■When playing music files
91
TO USE A USB OR PC DEVICE
■■When selected music files are played
Page 1/1
Music List
Mark Mode
Drive1
USB1 External
001. - B01.mp3
00:00
002. -B02.mp3
00:00
Page 1/1
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Mark
Play Marked
Mark All
1
TO USE A USB OR PC DEVICE
92
1
Unmark All
2
3
Select the target folder or drive.
2
Select Mark Mode.
3
Select the desired music title.
4
Select Play Marked.
Marked music file is played.
1
Display the selected music file.
2
Mark all music files on the screen.
3
Deselect all marked music files.
4
Exit the Mark Mode.
5
Return to normal TV viewing.
Exit Mark Mode
4
P
Page Change
Exit
5
• When one or more music files are marked,
the marked music title will be played in
sequence. For example, if you want to listen
to only one music repeatedly, just mark the
music only and play it. If no music is marked,
all the music in the folder will be played in
sequence.
• If you want to activate Random playback, you
must set Option->Set audio play.->Random
to On.
Using the Music List function, play
Page 1/1
Music List
3 file(s) Marked
Drive1
USB1 External
Page 1/1
Choose options.
Set Audio Play.
►
004. - B04.mp3
00:00
005. - B05.mp3
■
►
Set Audio.
005. - B05.mp3
00:00
006. - B06.mp3
00:00
◄►
►
II ◄◄ ►►
1
008. - B08.mp3
00:00
Previous
02:30 / 03:25
Play with Photo
2
1
007. - B07.mp3
00:00
Q.MENU
Option
3
Hide
Exit
4
5
Close
Show the Option menu.
Select Set Audio Play. or Set Audio.
( ■ ) : Stop the playing music file.
( ► ) : Return to normal playback.
1
( II ) :
When you select the II while playing the file, the playback will be paused.
When you select the II again while the playback is paused, it will resume the playback.
( ◄◄ / ►► ) :
When playing,
When you select the ◄◄, the previous music file will be played.
When you select the ►►, the next music file will be played.
2
Start playing the selected music files and then move to the Photo List.
3
Select the
repeatedly to change the brightness of your screen.(Refer to p. 113)
Only Off/Screen Off operates from the Movie List, Photo List, Music List.
4
■■ When you select the Hide while the music is playing, the music player currently
playing will be hidden and only the music list will be displayed.
■■ When you select the Exit while the Music player is displayed, only the music will
be stopped and the player will not return to normal TV viewing.
■■ When you select the Exit while the music is stopped or while the music player is
hidden, the player will return to normal TV viewing.
5
TO USE A USB OR PC DEVICE
2
NOTE
►►Option values changed in Movie List does not affect Photo List and Music List.
►►Option value changed in Photo List and Music List are changed likewise in Photo List and Music List
excluding Movie List.
►►You can listen to the music only within the device currently played.
93
TO USE A USB OR PC DEVICE
■■When you select the Set Audio Play,
Set Audio Play.
Repeat
◄
On
►
Random
◄
Off
►
Previous
1
Make appropriate adjustments.
Then, select Close.
TO USE A USB OR PC DEVICE
■■When you select the Set Audio,
Set Audio.
Sound Mode
◄
Standard
►
Auto Volume
◄
Off
►
Clear Voice II
◄
Off
►
Balance
Previous
1
94
Close
0
◄
L
R ►
Close
Make appropriate adjustments.
Then, select Close.
■■ If you don't press any button for a while during the playing, the
play information box (as shown in the below) will float as a
screen saver.
■■ The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an fixed
image remaining on the screen for a extended period of time.
002. B02.mp3
► 00:31 / 04:04
►►A damaged or corrupted music file does not play but displays 00:00 in playtime.
►►A music file downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime.
►►If you press OK, ■ buttons, screen saver is stopped.
►►The PLAY(►), Pause(II), ■ , ►►, ◄◄ buttons on the remote control are also available in this mode.
►►You can use the ►► button to select the next music file and the ◄◄ button to select the previous music
file.
TO USE A USB OR PC DEVICE
NOTE
95
TO USE A USB OR PC DEVICE
DIVX REGISTRATION CODE
Confirm the DivX registration code number of the TV. Using the registration number, movies can be
rented or purchased at www.divx.com/vod.
With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed.
(Only DivX files matched with the registration code of the purchased TV are playable.)
MY MEDIA
DivX Reg.Code
Deactivation
Movie List
Photo List
1
TO USE A USB OR PC DEVICE
2
3
Music List
Previous
You must register your device to
play DivX protected videos.
Registration code : **********
Register at http://vod.divx.com
Close
Select MY MEDIA.
BLUE
Select DivX Reg. Code.
Display DivX Reg. Code.
• Press the MENU/EXIT button to return to normal TV viewing.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This
is an official DivX Certified® device that plays DivX video. Visit www.divx.com
for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To
obtain your registration code, locate the DivX VOD section in your device setup
menu. Go to vod.divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and
are used under license.
Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274
NOTE
96
►►Movie files are supported as follows
Resolution : under 1920x1080 WxH pixels
Frame rate : under 30 frames/sec(1920x1080), under 60 frames/sec(under 1280x720)
►►Video Codec : MPEG 1, MPEG 2, MPEG 4, H.264/AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6,
Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1, Xvid 1.10-beta2, JPEG, VC1,
Sorenson H.263/H.264
►The
►
DRM/*.tp /*.trp file in DLNA server is not played when Movie List is in operation.
DEACTIVATION
The purpose of deactivation is to allow deactivation of devices for users who have activated all the
available devices through the web_server and are blocked from activating more devices. DivX VOD
allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any
of those devices, the consumer had to contact DivX Support and request deletion. Now with this
added feature, consumers will be able to deactivate the device themselves and hence better manage
their DivX VOD devices.
MY MEDIA
DivX Reg.Code
Deactivation
Movie List
2
3
4
Previous
Music List
Yes
No
Select MY MEDIA.
BLUE
Select Deactivation.
Select Yes.
Display Deactivation.
TO USE A USB OR PC DEVICE
1
Photo List
Deregistration code :
********
Deregister at http://vod.divx.com
Continue with registration?
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
97
GAME/SCHEDULE
GAME/SCHEDULE
World Time
This function operates only if the current time has been set.
Simple Manual
Pointer
Exit
Home Menu
ide
Gu
TV
PR
PR
Today
Today
Today
Today
Today
30
30
30
30
30
------------------ --------------- --------------- ---- ---------------- ---- ----------- ---- --------- ---- ---- --- ---
Quick Menu
GUIDE
Programme List
INPUT
NETCAST
MY MEDIA
PR
PR
PR
GAME/SCHEDULE
QUICK MENU
Netcast
Screen Remote
GAME/SCHEDULE
World Clock
GAME/SCHEDULE
Kiev, Ukraine
2007/02/07(Wed.) 19:22
Move
Select Region
Ukraine
Kiev
2007/02/07(Wed.)
19:22
Previous
City List
Exit
Sydney
Schedule
SUDOKU
JIGSAW
INVADER
URGENT SURVIVAL
JUMP
HOLE IN ONE WHACK A MOLE
COOKING BURGER BALLOON HUNTER SAVING CRYSTAL
Exit
1
2
3
4
5
98
Select Home Menu.
Select GAME/SCHEDULE.
Select World Clock.
Select a desired city.
You can check the world clock.
Select Exit.
•T
he day light saving is not shown at the
world clock.
Schedule
This function operates only if the current time has been set.
Simple Manual
Pointer
Exit
Home Menu
ide
Gu
TV
PR
PR
Today
Today
Today
Today
Today
30
30
30
30
30
------------------ --------------- --------------- ---- ---------------- ---- ----------- ---- --------- ---- ---- --- ---
Quick Menu
GUIDE
Programme List
INPUT
NETCAST
MY MEDIA
PR
PR
PR
GAME/SCHEDULE
QUICK MENU
Netcast
Screen Remote
GAME/SCHEDULE
Schedule
Navigation
Add/Edit
Schedule
SUDOKU
JIGSAW
INVADER
URGENT SURVIVAL
JUMP
HOLE IN ONE WHACK A MOLE
COOKING BURGER BALLOON HUNTER SAVING CRYSTAL
Lunar 23 May
List view
Picture change
P
Previous Month
P
Next Month
Exit
GAME/SCHEDULE
July 4
Sydney
Exit
1
2
3
4
Select Home Menu.
Select GAME/SCHEDULE.
Select Schedule.
Select a desired date.
You can check the schedule.
99
GAME/SCHEDULE
Schedule Registration
1/2
Add Schedule
Sun 4 July
Lunar 23. 5
Mother
P
GAME/SCHEDULE
100
5
6
7
8
No
repeat
Solar
Notice
D-day
Grandmother
Son
Birthday
The day Add a
D-Day
Previous Step
Add/Edit
Next Month
Exit
Father
Daughter
Custom
Event
Father Birthday
Solar/Lunar
Navigation
Person
Grandfather
Repeat
Schedule
P
Test
Next Step
July 4
Anniversary
Travel
Meeting
Save
Custom
Cancel
Select the desired menu option.
The icon is displayed.
Select List View to use schedule.
Select Exit.
Lunar 23 May
List view
Picture change
P
Previous Month
P
Game
Allows you to enjoy the games installed on the TV.
Simple Manual
Pointer
Exit
Home Menu
PR
PR
Today
Today
Today
Today
Today
ide
Gu
TV
30
30
30
30
30
------------------ --------------- --------------- ---- ---------------- ---- ----------- ---- --------- ---- ---- --- ---
Quick Menu
GUIDE
Programme List
INPUT
NETCAST
MY MEDIA
PR
PR
PR
GAME/SCHEDULE
QUICK MENU
Netcast
Screen Remote
GAME/SCHEDULE
Schedule
SUDOKU
JIGSAW
INVADER
URGENT SURVIVAL
JUMP
HOLE IN ONE WHACK A MOLE
COOKING BURGER BALLOON HUNTER SAVING CRYSTAL
Exit
1
2
3
4
GAME/SCHEDULE
Sydney
Select Home Menu.
Select GAME/SCHEDULE.
Enter the selected game mode.
Select Exit.
101
EPG(ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
(Except New Zealand)
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible
viewing options.
The EPG supplies information such as programme listings, start and end times for all available services. In
addition, detailed information about the programme is often available in the EPG (the availability and
amount of these programme details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcast by broadcasting companies.
You must set the Clock in the Time menu, before using EPG function.
The EPG displays the programme details for 8 days.
►
DTV 1 TV ONE
►
Pr. Change
► Next
Watch
Good Morning
21:00
00:00
Show/Game Show
16:9
720p
... HE-AAC
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,
with regular and special guests.
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,
with regular and special guests.
▼
INFO
Shows current programme information
Displayed with a Teletext Programme.
Displayed with a Radio Programme.
Displayed with a Subtitle Programme.
Displayed with a MHEG Programme.
Displayed with a Scramble Programme.
Displayed with a Dolby Digital Programme.
Aspect ratio of broadcasting programme.
Displayed with a Dolby Digital PLUS Programme.
Aspect ratio of broadcasting programme.
576i/p, 720p, 1080i/p : Resolution of broadcasting programme
Shows next programme information.
Shows other programme information.
Do you want to set a reminder for the
selected programme?
Bob The Builder Special
DTV 1 ABC TV Sydney
22 Dec. 2009 10:15~10:58
DTV 2 TV2
Tyra
00:00
Yes
Show/Game Show
►
?
►
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
Displayed with a TV or DTV Programme.
HE-AAC Displayed with a HE-AAC Programme.
21:00
No
Talk show host Tyra Banks sits down with Keyshia Cole, the cast of Gossip Girl and Rihanna.
Talk show host Tyra Banks sits down with Keyshia Cole, the cast of Gossip Girl and Rihanna.
A pop-up window for remind settings appear.
Select Timer Remind setting mode.
102
Up
Down
Pr. Change
◄ Now
Schedule
EPG(ELECTRONIC PROGRAMME GUIDE)
Simple Manual
Home Menu
Quick Menu
30
30
30
30
30
Programme List
PR
PR
PR
NETCAST
INPUT
GUIDE
Netcast
Exit
Today
Today
Today
Today
Today
Today
ide
Gu
TV
---- ------ ---- -------- ---- ------------------- -------------------- --------------- ------------ ---- --- ------
PR
PR
Pointer
MY MEDIA GAME/SCHEDULE QUICK MENU
Screen Remote
Programme Guide
▲
That ’70s show
25 Nov. 2008 10:05
ALL
14:00
Tue. 25 Nov.
15:00
▼
Kungskonsumente
Antigues Roadshow
The Drum
Mint Extra
TV2: Farmen
The Drum
You Call The Hits
Fashion Essentials
...
... ...
Tänään otsikoissa
1 YLE TV1
2 YLE TV2
4 TV..
5 YLE FST
6 CNN
8 YLE24
◄
DTV 1 YLE TV1 25 Nov. 2008 09:45~10:15
◄
...
Information
FAV FAVOURITE
1
Mode
2
Select Home Menu.
Date
Manual Timer
4
3
1
2
2
3
Select GUIDE.
3
4
5
Select the desired programme.
6
7
Exit
6
Schedule List
5
F
AVOURITE : Change FAVOURITE mode.
M
ode : Change EPG mode.
Date : Enter Date setting mode.
M
anual Timer : Enter Manual Timer mode.
S
chedule List : Enter Schedule List mode.
E
xit : Switch off EPG.
Select desired programme.
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
1
7
▼
103
EPG(ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL
MODE)
EXTENDED DESCRIPTION
DTV 7 7digital
IT'S ACADEMIC
Tue. 25 Nov. 2008 10:05
25 Nov. 2008 10:05
12:40
SIMON REEVE returns with all new episodes of the educational and
entertaining show where schools compete to win cash and prized WS
Watch TV
1
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
104
2
3
Repeat step 1-2 on P.103.
Select the desired programme.
Select WatchTV or Switch off EPG.
Close
MANUAL TIMER
Manual Timer
Select the date to schedule.
Mon.
Wed. 12 Aug. 2009 13:46
Tue.
Wed.Once Thu.
Fri.
Sat.
09
10
11
12
Daily13
14
15
16
17
18
19
Weekly(Wed.)
20
21
22
►
Sun.
No schedule list
Mon.~Fri.
23
24
25
26
27
30
31
01
02
03
Move
Programme Guide
1
3
4
5
6
28
29
04
05
Cancel
OK
Schedule List
Exit
Repeat step 1-2 on P.103.
Select Manual Timer.
Please select the date to schedule.
Please select the repeat option to schedule.
Select Start Time or Programme.
Select Exit.
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
2
Wed. 12 Aug. 2009
105
EPG(ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL
MODE)
SCHEDULE LIST
If you’ve created a schedule list, a scheduled programme is displayed at the scheduled time even
when you are watching a different programme at the time.
Currently recording item cannot be edited or deleted.
Schedule List
Page1/1
Start Date
6 May 16:00 18:00 Title
Friend1
Friend2
Friend2
16:00
Modify
Modify
►
6 May Fri. 6 Apr. 2007 15:09
Start Time
Delete
Delete All
Remind
DTV 19 Dave
(Fri.)06/05/2007
16:00
Programme Guide
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
106
1
2
3
4
5
Close
Manual Timer
Repeat step 1-2 on P.103.
Select Schedule List.
Please select the Schedule List to modify.
Please select the desired feature.
Select Exit.
Exit
MHEG (MULTIMEDIA AND HYPERMEDIA INFORMATION
CODING EXPERT GROUP)(IN DIGITAL MODE)
(Only South Africa, Malaysia)
The TV gives you access to digital teletext which is greatly improved in various aspects such as text,
graphics etc.
This digital teletext can access special digital teletext services and specific services which broadcast
digital teletext.
TELETEXT WITHIN DIGITAL SERVICE
1
Press the numeric or P
button to select a
digital service which broadcasts digital teletext.
2
Follow the indications on digital teletext and
move onto the next step by pressing TEXT,
OK,
, RED, GREEN, YELLOW, BLUE
or NUMBER buttons and etc..
3
To change digital teletext service, select a different service by the numeric or P
button.
1
Press the numeric or P
button to select a
certain service which broadcasts digital teletext.
2
Press the TEXT or coloured button to switch on
teletext.
3
Follow the indications on digital teletext and move
onto the next step by pressing OK,
, RED,
GREEN, YELLOW, BLUE or NUMBER buttons and
so on.
4
Press the TEXT or colour button to switch off
digital teletext and return to TV viewing.
Some services may allow you to access text services by pressing the RED button.
MHEG (MULTIMEDIA AND HYPERMEDIA INFORMATION
CODING EXPERT GROUP)(IN DIGITAL MODE)
TELETEXT IN DIGITAL SERVICE
107
MHEG (MULTIMEDIA AND HYPERMEDIA INFORMATION
CODING EXPERT GROUP)(IN DIGITAL MODE)
(Only New Zealand)
This feature is enabled only in New Zealand.
- In New Zealand, pressing the Guide key will display MHEG EPG provided by New Zealand on the screen.
This system has an MHEG(Multimedia and hypermedia information coding expert group) to help your navigation through all the possible viewing options.
►
DTV 1 TV ONE
►
Pr. Change
► Next
Watch
Good Morning
21:00
00:00
Show/Game Show
16:9
720p
... HE-AAC
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,
with regular and special guests.
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,
with regular and special guests.
▼
INFO
Shows current programme information
Displayed with a TV or DTV Programme.
Displayed with a Teletext Programme.
Displayed with a Radio Programme.
Displayed with a Subtitle Programme.
Displayed with a MHEG Programme.
Displayed with a Scramble Programme.
HE-AAC Displayed with a HE-AAC Programme.
MHEG (MULTIMEDIA AND HYPERMEDIA INFORMATION
CODING EXPERT GROUP)(IN DIGITAL MODE)
108
Displayed with a Dolby Digital PLUS Programme.
Aspect ratio of broadcasting programme.
576i/p, 720p, 1080i/p : Resolution of broadcasting programme
Switch on the MHEG.
SELECT A PROGRAMME
1
2
3
Displayed with a Dolby Digital Programme.
Aspect ratio of broadcasting programme.
SWITCH ON MHEG
1
Up
Down
Preview the Broadcast Programme
Information.
change to desired channel.
The MHEG will disappear after
moving to a selected channel.
BUTTON FUNCTION IN LISTING MODE
Select the Broadcast Programme
Information.
Select Channel.
YELLOW Change to Next Week or Prev Day.
BLUE Change to Next Day or Today.
Next Week
EPG/Guide
The MHEG will disappear after
moving to a selected channel.
19
Change to Now/Next mode.
Switch off MHEG.
INFO
Detail information on or off.
Today
BUTTON FUNCTION IN NOW/NEXT MODE
You can view a channel being broadcasted and one scheduled to follow.
Select desired channel.
1
TV ONE
The MHEG will disappear after moving
to a selected channel.
Now 2.30pm
Next 3.00pm
2
TV2
Now 2.30pm
Next 3.00pm
Neighbours
Jojo’s Circus
3
TV3
Now 2.00pm
Next 3.00pm
Oprah
Rugrats
Change to Listing mode.
4
C4
Now 2.00pm
Next 4.00pm
The Officaial NZ Top 40
Vodafone Select Live
5
Switch off MHEG.
INFO
2.33pm Tue 12 Feb
What’s on now/next.
Detail information on or off.
Now 12.00am
Next 3.00pm
Neighbours
Jojo’s Circus
News : Te Kaea
Advice: Ask Your Auntie
MHEG (MULTIMEDIA AND HYPERMEDIA INFORMATION
CODING EXPERT GROUP)(IN DIGITAL MODE)
EPG/Guide
109
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan,
Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom.
If a fixed image is displayed on the screen for a long time, that fixed
image may become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using
button.
This function works in the following signal.
1
2
3
Select Quick Menu.
Select Aspect Ratio.
Select the desired picture format.
PICTURE CONTROL
• 16:9
The following selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
PICTURE menu.
•F
or Zoom Setting, select 14:9, Zoom and
Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes
back to Q.Menu.
• Original
When your TV receives a wide screen signal it will
automatically change to the picture format broadcast.
Original
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there is noise in original Picture, You
can see the noise at the edge.
Just Scan
110
•Y
ou can also adjust Aspect Ratio in the
or
Original
• Full Wide (Only DTV)
When TV receives the wide screen signal, it will
lead you to adjust the picture horizontally or vertically, in a linear proportion, to fill the entire screen
fully.
4:3 and 14:9 video is supported in full screen without any video distortion through DTV input.
Full Wide
or
Full Wide
• 4:3
The following selection will allow you to view a picture with an original 4:3 aspect ratio.
• Zoom
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and bottom
of the picture will be cropped.
• 14:9
You can view a picture format of 14:9 or a general
TV programme in the 14:9 mode. The 14:9 screen
is viewed in the same way as in 4:3, but is moved
to the up and down.
• Cinema Zoom
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
Note:When enlarging or reducing the picture,
the image may become distorted.
PICTURE CONTROL
◄ or ► button: Adjust enlarge proportion of
Cinema Zoom. The adjustment range is 1 to 16.
▼ or ▲ button: Move the screen.
NOTE
►►You can only select 4:3, 16:9 (Wide), 14:9, Zoom/Cinema Zoom in Component mode.
►►You can only select 4:3, Original, 16:9 (Wide), 14:9, Zoom/Cinema Zoom in HDMI mode.
►►You can only select 4:3, 16:9 (Wide) in RGB-PC, HDMI-PC mode only.
►►In DTV/HDMI/Component (over 720p) mode, Just Scan is available.
111
PICTURE CONTROL
PICTURE WIZARD
This feature lets you adjust the picture quality of the original image.
Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can
calibrate the screen quality by easily following each stage.
When you adjust the image to Low, Recommended or High, you can see the changed result as an
example.
In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness values are not
applied.
PICTURE
● Aspect
Ratio
Move
With Picture Wizard, you can adjust the picture quality of the
original image.
: 16:9
1
PICTURE CONTROL
2
3
4
5
Mode
►
Energy Saving
● Picture
►
● Picture Wizard
●
Picture Wizard
OK
: Off
: Standard
• Backlight
70
• Contrast
100
• Brightness
50
• Sharpness
70
Previous
Select PICTURE.
Select Picture Wizard.
Adjust Standard(Black Level,
White Level, Tint, Colour,
Horizontal Sharpness, Vertical
Sharpness, Backlight) or
Preferred(Black Level, White
Level, Tint, Colour, Sharpness,
Dynamic Contrast, Colour
Temperature, Backlight).
Select input source to apply
the settings.
Next
• If you stop the setting before the
final stage, the changes will not be
applied
• The adjustment value is saved to
Expert1.
• Once the Picture Wizard sets the
image quality, the Energy Saving is
changed into Off.
• If the picture quality setting of
Expert1 is changed, use the
Picture Reset before entering the
Picture Wizard to reset the picture
quality setting.
• Standard : mode to set standard
picture quality.
• Preferred : mode to set user preferred picture quality rather than
standard picture.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
112
ENERGY SAVING
It reduces the TV’s power consumption.
The default factory setting is adjusted to the comfortable level to be viewed at home.
You can change the brightness of your screen by adjusting the Energy Saving level or by setting the
Picture Mode.
When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is
finished.
Selecting ‘Screen Off’ while tuned to a radio station channel will reduce power consumption.
Press button to run the selected
function.
Screen Remote
Home Menu
Quick Menu
PR
PR
PR
PR
PR
Programme List
Netcast
Screen Remote
2
3
AV MODE
FAV
GUIDE
Q.MENU
SIMPLINK
Close
OK
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
Select Screen Remote.
Select ENERGY SAVING.
Select ENERGY SAVING repeatedly
to select your desired menu option.
PICTURE CONTROL
1
ENERGY
SAVING
• When you select Screen Off, the screen will be turned off in 3 seconds and Screen Off will start.
• If you adjust “Energy Saving-Auto, Maximum”, Backlight feature will not work.
• You can also adjust this feature by selecting Energy Saving button on the remote control.
• When selecting Auto, Backlight is automatically adjusted through intelligent sensor according to the
surrounding condition when intelligent sensor is in the TV.
• You can also adjust Energy Saving in the PICTURE menu.
113
PICTURE CONTROL
PRESET PICTURE SETTINGS
Picture Mode-Preset
Vivid
Standard
Cinema
Sport
Game
Strengthen the contrast, brightness, colour and sharpness for vivid picture.
The most general screen display status.
Optimizes video for watching movies.
Optimizes video for watching sports events.
Optimizes video for playing games.
● Aspect
Ratio
● Picture
Wizard
●ꕊ
Move
OK
: 16:9
● Aspect
Ratio
● Picture
Wizard
●
Energy Saving : Off
●●Picture
Picture Mode
Mode
PICTURE
Energy Saving
●●Picture
Mode
Picture
Mode
Standard
::Standard
Move
OK
: 16:9
Intelligent Sensor
: Off
Vivid
Standard
::Standard
70
• Backlight
70
• Contrast
100
• Contrast
100
• Brightness
50
• Brightness
50
• Sharpness
70
• Sharpness
70
Standard
Standard
►
• Backlight
►
PICTURE
Cinema
Sport
Game
ꕋ Expert1
ꕋ Expert2
1
PICTURE CONTROL
2
3
Select PICTURE.
Select Picture Mode.
Select Intelligent Sensor, Vivid, Standard, Cinema, Sport or Game.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
• Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the
Picture Mode menu based on the programme category.
• When the Intelligent sensor function is on, the most suitable picture is automatically adjusted
according to the surrounding conditions.
• You can also adjust Picture Mode in the Q. Menu.
• Intelligent Sensor : Adjusts picture according to the surrounding conditions.
114
MANUAL PICTURE ADJUSTMENT
Picture Mode-User option
Backlight
To control the brightness of the screen, adjust the brightness of LCD panel.
Adjusting the backlight when setting the brightness of the set is recommended.
Contrast
Adjusts the signal level between black and white in the picture. You may use Contrast when the bright
part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Colour
Adjusts intensity of all colours.
Tint
Adjusts the balance between red and green levels.
Colour Temp.
Adjust to left direction to make a picture reddish or adjust to right direction to make a picture bluish.
It is not available to use this function in “Intelligent Sensor”.
● Aspect
Ratio
● Picture
Wizard
●ꕊ
Move
PICTURE
OK
: 16:9
Energy Saving : Off
●●Picture
Picture Mode
Mode
● Aspect
Ratio
● Picture
Wizard
●
Standard
::Standard
Energy Saving
●●Picture
Mode
Picture
Mode
Move
OK
: 16:9
Intelligent Sensor
: Off
Vivid
Standard
::Standard
• Backlight
70
• Contrast
100
• Contrast
100
• Brightness
50
• Brightness
50
• Sharpness
70
• Sharpness
70
Standard
Standard
Cinema
Sport
Game
ꕋ Expert1
ꕋ Expert2
1
2
3
4
5
Select PICTURE.
PICTURE CONTROL
70
►
• Backlight
►
PICTURE
Select Picture Mode.
Select Vivid, Standard, Cinema, Sport or Game.
Select Backlight, Contrast, Brightness, Sharpness, Colour,
Tint or Colour Temp..
Make appropriate adjustments.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
115
PICTURE CONTROL
• Benefits of using Backlight
- The electricity consumption is reduced by up to 60 %.
- The black brightness is reduced. (As the black has greater depth, you can enjoy a better quality
definition.)
- You can adjust brightness with maintaining original signal resolution.
PICTURE CONTROL
116
NOTE
►►You cannot adjust colour, sharpness and tint in the RGB-PC/HDMI-PC mode.
►►When the Expert 1/2 is selected, you can select Backlight, Contrast, Brightness, H Sharpness, V
Sharpness, Colour or Tint.
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special
video screen.
You can set the video value differently for each input.
To reset to the factory default screen after making adjustments to each video mode, execute the
“Picture Reset” function for each Picture Mode.
PICTURE
Move
• Sharpness
• Colour
PICTURE
OK
70
60
0
R
G
• Colour Temp.
0
W
C
►
• Advanced
Advanced Control
Control
►
• Tint
• Picture Reset
• TruMotion
: Off
• TruMotion
• Screen
• Screen
Move
OK
Dynamic Contrast
• Sharpness
70
Dynamic Colour
• Colour
R60
G
Clear White
• Tint
C
W0
Skin Colour
• Colour Temp.
Reduction
• Advanced
Control
AdvancedNoise
Control
◄ Medium
Off
0
Medium
Digital Noise Reduction
• Picture Reset
Medium
Gamma
Medium
: Off
►
Medium
Black Level
Auto
Eye Care
▼
Low
Close
2
3
4
Select PICTURE.
Select Advanced Control.
Select your desired Source.:
Dynamic Contrast, Dynamic Colour, Clear White, Skin Colour, Noise Reduction,
Digital Noise Reduction, Gamma, Black Level, Eye Care, Real Cinema, Colour
Gamut or xvYCC. (Refer to p. 119 to 120)
PICTURE CONTROL
1
Make appropriate adjustments.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
117
PICTURE CONTROL
EXPERT PICTURE CONTROL
By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they
see fit, offering the optimal picture quality for users.
This may also be used to help a professional optimize the TV performance using specific videos.
PICTURE
● Aspect
Ratio
● Picture
Wizard
●
Energy Saving
Mode
Picture
Mode
●●Picture
Move
PICTURE
OK
: 16:9
OK
◄ Medium
: Off
Vivid
Expert1 Standard
Standard
• Backlight
70
Cinema
• Contrast
90
Sport
• Brightness
50
Game
• TruMotion
• Screen
• H Sharpness ꕋ
70 Expert1
Expert1
Medium
• Colour
60 R
Black Level
• Tint
0
Real Cinema
Advanced
Control
•• Expert
Control
Colour Gamut
• Picture Reset
: Off Edge Enhancer
G
Auto
On
EBU
High
xvYCC
Auto
Expert Pattern
Expert2
►
Medium
• V Sharpness
Digital Noise 60
Reduction
Intelligent Sensor
::
Move
Dynamic Contrast
• H Sharpness
70
Noise Reduction
Off
▼
Close
1
PICTURE CONTROL
2
3
4
5
6
Select PICTURE.
Select Picture Mode.
Select
Expert1 or
Expert2.
Select Expert Control.
Select your desired Source.
Make appropriate adjustments.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
118
*This feature is not available for all models.
Dynamic Contrast
(Off/Low/Medium/High)
Dynamic Colour
(Off/Low/High )
■■ Adjusts the contrast to keep it at the best level according to the brightness of
the screen. The picture is improved by making bright parts brighter and dark
parts darker.
■■ Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and
white look more vivid.
Skin Colour
■■ Adjusts skin colour of the picture so that user can set his favourite skin
colour.
(-5 to 5)
Noise Reduction
(Off/Low/Medium/High/ ■■ Reduces screen noise without compromising video quality.
Auto(In Analogue Mode
Only))
Digital Noise Reduction
■■ Reduces noise regarding MPEG compressed video.
(Off/Low/Medium/High)
Gamma
(Advanced Control:
Low/Medium/High
Expert Control:
1.9/2.2/2.4)
Clear White
(Off/Low/High)
Eye Care
(Low/High/Off)
Real Cinema/
Film Mode
(On/Off)
• Low : The picture of the screen gets darker.
• High : The picture of the screen gets brighter.
• Auto : Sets black level of the screen to High or Low automatically according to
the input signal level.
■■ This function enables to select 'Low' or 'High' in the following mode:
AV(NTSC-M), HDMI or Component. Otherwise, 'Black level' is set to 'Auto'.
■■ Makes the white area of the screen brighter and clearer.
*This feature is not available for all models.
■■ Adjusts the brightness of the screen automatically to the best level for
eyes when the screen is too bright.
■■ This feature is disable in “Picture Mode-Vivid, Cinema, Expert1,
Expert2, Intelligent Sensor”.
■■ You can watch a cinema-like video by eliminating judder effect.
■■ Uses this function when you watch film-originated movie contents.
■■ This function can work when TruMotion is off.
PICTURE CONTROL
Black Level
(Low/High/Auto)
■■ You can adjust brightness of dark area and middle gray level area of the picture.
• Low/1.9 : Makes dark and middle gray level area of the picture brighter.
• Medium/2.2 : Expresses original picture levels.
• High/2.4: Makes dark and middle gray level area of the picture darker.
119
PICTURE CONTROL
Colour Gamut
(Advanced Control)
(Wide/Standard)
• Standard : Mode to use original colour area regardless of the display char-
acteristics.
• Wide: Mode to use maximum colour area of the TV display.
• Standard : Mode to use original colour area regardless of the display characteristics.
Colour Gamut
(Expert Control: EBU/ • Wide : Mode to use maximum colour area of the TV display.
SMPTE/BT709/Wide/ • EBU : Mode to display EBU colour area.
Standard)
• SMPTE : Mode to display SMPTE colour area.
• BT709 : Mode to display BT709 colour area.
■■ Makes the edge of the picture clearer and distinctive.
Edge Enhancer
(Off/Low/High)
■■ This function can use in “Picture Mode-Expert.”
*This feature is not available for all models.
xvYCC
■■ This is the function to express richer colour.
(Auto/off/on)
■■ This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is inputted through HDMI
Expert Pattern
■■ This is the pattern necessary for checking the picture of Digital TV.
(Off/Pattern1/Pattern2) ■■ This function is enabled in "Picture Mode - Expert" when you watch DTV.
Colour Filter
■■ This is the function to filter the specific colours of the video.
(Off/Red/Green/Blue) You can use the RGB filter to set colour saturation and hue accurately.
PICTURE CONTROL
Colour Temperature
(Medium/Warm/Cool)
Colour Management
System
120
This is the function to adjust the overall colour of the screen to the feeling you want.
a. • Method : 2 Points
• Pattern: Inner, Outer
• Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 to +50.
b. • Method : 10 point IRE
• Pattern: Inner / Outer
• IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 10, 20, 30 to 100. You can adjust Red, Green or Blue
according to each setting.
• Luminance: This function displays calculated luminance value for 2.2 gamma.
You can input luminance value you want at 100 IRE, than the target luminance
value for 2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE.
• Red/Green/Blue: The adjustment range is -50 to +50.
■■ As the tool used by the experts to make adjustments by using the test patterns, this does not affect other colours but can be used to selectively
adjust the 6 colour areas (Red/Green/Blue/Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjustments for the general video.
■■ Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
• Red/Green/Blue/Yellow/Cyan, Magenta Colour : The adjustment
range is -30 to +30.
• Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment
range is -30 to +30.
■■ This feature is disable in RGB-PC and HDMI (PC) mode.
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
PICTURE
Move
• Sharpness
70
• Colour
60
PICTURE
OK
• Tint
0
R
G
• Colour Temp.
0
W
C
►
: Off
3
4
• TruMotion
Yes
No
: Off
• Screen
Select PICTURE.
PICTURE CONTROL
2
60
OK
• Advanced Control
• Screen
1
• Colour
•• Picture
Picture Reset
Reset
►
• TruMotion
70
• Tint ? All picture
0 Rsetting willGbe reset.
C
• Colour Temp.
Continue?W
• Advanced Control
•• Picture
Picture Reset
Reset
Move
• Sharpness
Select Picture Reset.
Select Yes.
Initialize the adjusted value.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
121
PICTURE CONTROL
TRUMOTION
*This feature is not available for all models.
It is used for the best picture quality without any motion blur or judder when you enter a quick image
or Film Source.
High : Provides smoother picture movement.
Low : Provides smooth picture movement. Use this setting for standard use.
Off : Turn off TruMotion Operation.
User : User can adjust Judder and Blur level in TruMotion Operation, separately.
- Judder : Adjusts noise of the screen.
- Blur : Adjusts after-image of the screen.
This feature is disable in RGB-PC, HDMI-PC and MY MEDIA-Photo List mode.
If you enable "TruMotion", noise may appear on the screen.
If this occurs, set "TruMotion" to "Off".
PICTURE
Move
• Sharpness
70
• Colour
60
OK
TruMotion
• Tint
0
R
G
• Colour Temp.
0
W
C
• Advanced Control
: Off
3
● Blur
3
►
OK
►
••TruMotion
TruMotion
►
• Picture Reset
◄ Low
● Judder
• Screen
PICTURE CONTROL
1
2
3
4
Select PICTURE.
Select TruMotion.
Select Low, High, User or Off.
Make appropriate adjustments.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
122
LED LOCAL DIMMING
After analyzing the signal of the input video by areas of the screen, it adjusts the backlight to improve
the contrast ratio.
1
2
PICTURE
OK
60
• Tint
0
R
• Colour Temp. 0
W
• TruMotion
Move
OK
• Colour
60
G
• Tint
0
R
G
C
• Colour Temp. 0
W
C
• Advanced Control
• Advanced Control
• Picture Reset
• Picture Reset
: Off
• TruMotion
: Off
• Screen
Off
•• LED
LED Local
Local Dimming
Dimming :: On
On
•• LED
LED Local
Local Dimming
Dimming :: On
On
On
Teletext
►
• Screen
►
• Colour
Select PICTURE.
Select LED Local Dimming.
PICTURE CONTROL
3
Move
►
PICTURE
Select On or Off.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
123
PICTURE CONTROL
POWER INDICATOR
Adjust the power/standby indicator light on the front of the TV.
Standby Light
Determines whether to set the indicator light on the front of the TV to On or Off in standby mode.
Power Light
Determines whether to set the indicator light on the front of the TV to On or Off when the power turns
on.
If you select 3D mode, Power indicator is turned off automatically.
OPTION
Move
● Country
● Country
: Australia
of Hearing (ꔞ): Off
● Factory
● Set
● IR
PICTURE CONTROL
3
4
Setting
Blaster
►
● Factory
:1
● Set
: Home Use
● Mode
: Off
● IR
Setting
Blaster
Standby Light
◄
Power Light
Reset
ID
OK
: Australia
of Hearing (ꔞ): Off
● Power Indicator
Reset
ID
● Mode
● Hard
►
● Power Indicator
2
Move
● Language(Language)
● Hard
1
OPTION
OK
● Language(Language)
On
►
On
:1
: Home Use
Close
: Off
Select OPTION.
Select Power Indicator.
Select Standby Light or Power Light.
Select your desired Source.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
124
MODE SETTING
We recommend setting the TV to “Home Use ” mode for the best picture in your home environment.
“Store Demo ” mode is an optimal setting for displaying at stores.
OPTION
Move
OPTION
OK
Move
● Language(Language)
● Language(Language)
● Country
● Country
● Hard
● Power
● Hard
Indicator
● Factory
Reset
ID
:
of Hearing (ꔞ):
● Power
Indicator
● Factory
Reset
Select [Home Use] to use this TV at home. To use
this TV at store, select [Store Demo].
● Set
:: Home
Home Use
Use
● Mode Setting
:: Home
Home Use
UseHome Use
● IR
: Off
● IR
: Off ● Demo Mode
Blaster
:1
OffChoose the setting mode you want.
:1
Blaster
ID
Australia
Selecting the environment.
● Mode Setting
►
● Set
: Australia
of Hearing (ꔞ): Off
OK
Store Demo
Off
Close
1
Select OPTION.
Select Mode Setting.
3
4
Select Store Demo or Home Use.
Save.
PICTURE CONTROL
2
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
125
PICTURE CONTROL
DEMO MODE
It is not possible to use Demo Mode in Home Use mode.
In Store Demo, Demo Mode is automatically set to On.
Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is
reset.
The screen is reset automatically after 5 minutes in Demo Mode.
OPTION
Move
OPTION
OK
Move
● Language(Language)
● Language(Language)
● Country
● Country
● Hard
● Power
● Hard
Indicator
● Factory
ID
:
of Hearing (ꔞ):
● Power
Reset
Indicator
● Factory
Reset
● Set
:: Home
Home Use
Use
● Mode Setting
:: Home
Home Use
UseHome Use
● IR
: Off
● IR
: Off ● Demo Mode
Blaster
:1
Select [Store Demo] to use this TV in store. To use
this TV at home, select [Home Use].
:1
Blaster
ID
Australia
Selecting the environment.
Off
Choose the setting mode you want.
● Mode Setting
►
● Set
: Australia
of Hearing (ꔞ): Off
OK
Store Demo
On
Close
1
PICTURE CONTROL
2
3
4
5
Select OPTION.
Select Mode Setting.
Select Store Demo.
Select On.
Move to the previous menu screen.
If you want to stop the demo, press any button. (except
+ , - button)
for MUTE,
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
126
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER
Auto Volume automatically remains on the same level of volume if you change programmes.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed
every time the channel is changed. This feature allows users to enjoy stable volume levels by making
automatic adjustments for each programme.
If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amp to cope with different user environments.
AUDIO
Voice II
: Off
: Off
3
● Balance
● Sound
1
2
Volume
● Clear
0
L
: Standard
R
Voice II
: Off
: Off
● Balance
● Sound
Mode
OK
MHEG
Off
3
On
0
L
R
: Standard
• Infinite Sound : Off
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
Select AUDIO.
Select Auto Volume.
SOUND & LANGUAGE CONTROL
3
Mode
● Auto
Move
►
Volume
● Clear
AUDIO
OK
►
● Auto
Move
Select On or Off.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
127
SOUND & LANGUAGE CONTROL
CLEAR VOICE II
By differentiating the human sound range from others, it helps users listen to human voices better.
AUDIO
Move
Volume
Off
:: Off
● Balance
● Sound
1
2
3
Mode
● Auto
33
►
Clear Voice
Voice II
II
●●Clear
AUDIO
OK
: Off
►
● Auto
0
L
R
: Standard
• Infinite Sound : Off
• Treble
50
• Bass
50
• Reset
Select AUDIO.
Move
Volume
Clear Voice
Voice II
II
●●Clear
: Off
Off
:: Off
● Balance
● Sound
Mode
OK
● Clear
33
L
0 ● Level
Voice II
R
◄
3
-
Off
►
+
: Standard
• Infinite Sound : Off
• Treble
50
• Bass
50
• Reset
Close
• If you select “On” for Clear Voice II,
Infinite Sound feature will not work.
• Select levels from ‘-6’ to ’+6’.
Select Clear Voice II.
Select On or Off.
SOUND & LANGUAGE CONTROL
Adjustment for Clear Voice Level With selecting On
4
5
Select Level.
Make desired adjustment.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
128
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can
also adjust the Treble, Bass.
Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content.
Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
Standard Offers standard-quality sound.
Music Optimizes sound for listening to music.
Cinema Optimizes sound for watching movies.
Sport Optimizes sound for watching sports events.
Game Optimizes sound for playing games.
AUDIO
Volume
● Clear
Voice II
Move
: Off
● Auto
3
L
R
Voice II
Move
OK
: Off
: Off
● Balance
3
L
Standard
0 Standard
Standard
:: Standard
• Infinite Sound : Off
• Treble
50
• Infinite Sound : OffCinema
• Treble
50 Sport
• Bass
50
• Bass
• Reset
• Reset
Select AUDIO.
R
Music
Sound Mode
Mode
●●Sound
50 Game
• You can also adjust Sound Mode in the Q.
Menu.
Select Sound Mode.
Select Standard, Music, Cinema, Sport or Game.
SOUND & LANGUAGE CONTROL
3
Standard
:: Standard
● Clear
0
►
2
Sound Mode
Mode
●●Sound
Volume
►
● Balance
1
AUDIO
OK
: Off
►
● Auto
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
129
SOUND & LANGUAGE CONTROL
SOUND SETTING ADJUSTMENT -USER MODE
AUDIO
Move
Volume
● Clear
Voice II
: Off
● Auto
3
4
5
Standard(User)
:: Standard
Voice II
: Off
3
L
R
Standard(User)
0 Standard
● Balance
R
OK
Music
Sound Mode
Mode
●●Sound
Standard(User)
:: Standard
• Infinite Sound : Off
• Treble
50
• Infinite Sound : OffCinema
• Treble
50 Sport
• Bass
50
• Bass
• Reset
• Reset
50 Game
Select AUDIO.
Select Sound Mode.
Select Standard, Music, Cinema, Sport or Game.
Select Treble or Bass.
Set the desired sound level.
SOUND & LANGUAGE CONTROL
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
INFINITE SOUND
Select this option to sound realistic.
1
2
3
130
Sound Mode
Mode
●●Sound
L
Move
: Off
►
3
0
►
2
Volume
● Clear
● Balance
1
AUDIO
OK
: Off
►
● Auto
Select AUDIO.
Select Infinite Sound.
Select On or Off.
Infinite Sound : Infinite Sound is a patented
LG proprietary sound processing technology
that strives immersive 5.1 surround sound
impression with front two loudspeakers.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
BALANCE
You can adjust the sound balance of the speakers to preferred levels.
AUDIO
Move
Volume
● Clear
Voice II
: Off
1
2
3
Mode
● Auto
3
R
: Standard
Move
Volume
● Clear
0 0L
►
●● Balance
Balance
● Sound
AUDIO
OK
: Off
►
● Auto
Voice II
: Off
●● Balance
Balance
● Sound
Mode
OK
: Off
3
0●0LBalance
: Standard
• Infinite Sound : Off
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
R
0◄
L
R
►
Close
Select AUDIO.
Select Balance.
Make desired adjustment.
SOUND & LANGUAGE CONTROL
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
131
SOUND & LANGUAGE CONTROL
TV SPEAKERS ON/ OFF SETUP
You can adjust the TV internal speaker status.
In AV, COMPONENT, RGB and HDMI with HDMI to DVI cable, the TV speaker can be operational
even when there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
● Sound
Move
Mode
● Sound
Move
Mode
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
: PCM
● Digital Audio
: :On
On
●●TV
TVSpeaker
Speaker
Out
Setting : Auto
►
● DTV Audio
►
• Infinite Sound : Off
●●TV
TVSpeaker
Speaker
● DTV Audio
Out
OK
: Standard
● Digital Audio
1
AUDIO
OK
: Standard
: PCM
: :On
On
Setting : Auto
Off
On
PCM
►
AUDIO
Select AUDIO.
2
Select TV Speaker.
SOUND & LANGUAGE CONTROL
3
Select On or Off.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
NOTE
►►When the TV speaker is turned off while the Simplink home theater is operating, the sound output automatically switches to the Home theater speaker, but when the TV speaker is turned on, the sound output the
TV speaker.
►►Some menus in AUDIO are disabled when TV Speaker is set to Off.
132
DTV AUDIO SETTING (IN DIGITAL MODE ONLY)
(Only DTV)
When different audio types exist in an input signal, this function allows you to select the audio type
you want.
AUDIO
● Sound
Move
Mode
AUDIO
OK
: Standard
● Sound
Move
Mode
OK
: Standard
• Infinite Sound : Off
• Infinite Sound : Off
• Treble
50
• Treble
• Bass
50
• Bass
50
• Reset
• Reset
Auto
Auto
: PCM
● Digital Audio
: PCM
HE-AAC
: On
● TV
: On
Dolby Digital+
: :Auto
Auto
Dolby Digital
● TV
Out
Speaker
DTVAudio
AudioSetting
Setting
●●DTV
Auto
: :Auto
Out
Speaker
● DTV Audio Setting
50
►
● Digital Audio
►
MPEG
1
2
Select DTV Audio Setting.
Select Auto, HE-AAC, Dolby Digital +, Dolby
Digital or MPEG.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
•Auto: Automatically outputs in the order HE-AAC > Dolby Digital+ > Dolby Digital > MPEG.
•HE-AAC, Dolby Digital +, Dolby Digital, MPEG: Allows users to select the audio type they want.
ex) If MPEG is selected, MPEG is always outputted.
If MPEG is not supported, another audio type is set in that order.
• Refer to p. 139 to 140 (Audio Language Selection)
SOUND & LANGUAGE CONTROL
3
Select AUDIO.
133
SOUND & LANGUAGE CONTROL
SELECTING DIGITAL AUDIO OUT
It is possible to use in DTV, HDMI, DivX mode.
This function allows you to select your preferred Digital Audio Output.
When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony
Philips Digital InterFace) output to Dolby Digital.
If Auto is selected in the digital audio out menu when Dolby Digital is not available, SPDIF output will
be PCM(Pulse-code modulation).
Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby
Digital Audio, only Dolby Digital will be played.
Mode
• Infinite Sound : Off
• Treble
50
• Bass
50
• Reset
Speaker
● DTV Audio
1
SOUND & LANGUAGE CONTROL
2
3
Out
: :PCM
PCM
● Sound
Move
Mode
: On
• Infinite Sound : Off
• Treble
50
• Bass
50
• Reset
● TV
Setting : Auto
Speaker
● DTV Audio
Out
OK
: Standard
● Digital Audio
►
● TV
AUDIO
: Standard
● Digital Audio
OK
►
● Sound
Move
: :PCM
PCM
: On
Auto
PCM
PCM
►
AUDIO
Setting : Auto
Select AUDIO.
Select Digital Audio Out.
Select Auto or PCM.
Item
Audio Input
Digital Audio output
Auto(Speaker On)
MPEG
Dolby Digital
Dolby Digital Plus
HE-AAC
PCM
Dolby Digital
Dolby Digital
PCM
Auto(Speaker Off)
MPEG
Dolby Digital
Dolby Digital Plus
HE-AAC
PCM
Dolby Digital
Dolby Digital
Dolby Digital
All
PCM
PCM
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
134
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
Mode
: Standard
● Sound
• Infinite Sound : Off
• Infinite Sound : Off
• Treble
50
• Treble
• Bass
50
• Bass
• Reset
• Reset
Speaker
● DTV Audio
3
Mode
: Standard
50
50
? All audio settings will be resetted.
: PCM
● Digital Audio
: On
● TV
Setting : Auto
OK
Speaker
● DTV Audio
Out
: PCM
: On
Setting : Auto
Continue?
Yes
No
Select AUDIO.
Select Reset.
Select Yes.
SOUND & LANGUAGE CONTROL
4
Out
►
● TV
2
Move
● Digital Audio
1
AUDIO
OK
►
● Sound
Move
Initialize the adjusted value.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
135
SOUND & LANGUAGE CONTROL
I/II
STEREO/DUAL RECEPTION (IN ANALOGUE MODE ONLY)
When a programme is selected, the sound information for the station appears with the programme
number and station name.
1
2
3
Select Quick Menu.
Select Audio or Audio Language.
Select the sound output.
Broadcast
MONO
Stereo
STEREO
Dual
(Except for Singapore, New Zealand and Indonesia)
NICAM (Only Singapore, New Zealand and Indonesia)
SOUND & LANGUAGE CONTROL
136
On Screen Display
Mono
DUAL I, DUAL II, DUAL I+II
(Except for Singapore, New Zealand and Indonesia)
NICAM (Only Singapore, New Zealand and Indonesia)
■■ Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved.
■■ Language selection for dual language broadcast (Except for Singapore, New Zealand and
Indonesia)
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL
II or DUAL I+II.
DUAL ISends the primary broadcast language to the loudspeakers.
DUAL IISends the secondary broadcast language to the loudspeakers.
DUAL I+II Sends a separate language to each loudspeaker.
NICAM RECEPTION (IN ANALOGUE MODE ONLY)
(Except for Singapore, New Zealand and Indonesia)
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
1
When NICAM mono is received, you can select NICAM MONO or FM MONO.
2
When NICAM stereo is received, you can select NICAM STEREO or FM MONO.
If the stereo signal is weak, switch to FM MONO.
3
When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or
NICAM DUAL I+II or FM MONO.
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right
loudspeakers.
Select the sound output.
L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from
audio R input is sent to the right loudspeaker.
L+L: Audio signal from audio L input is sent to left and right loudspeakers.
R+R: Audio signal from audio R input is sent to left and right loudspeakers.
SOUND & LANGUAGE CONTROL
SPEAKER SOUND OUTPUT SELECTION
137
SOUND & LANGUAGE CONTROL
ON-SCREEN MENU LANGUAGE / COUNTRY
SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
1
Select your desired language. (Except for Australia, New Zealand, Singapore and
South Africa.)
2
Select your country. (Only Australia & New Zealand)
* If you want to change Language/ Country selection
1
2
Select Language(Language).
3
Select Menu Language. (Except
for Australia, New Zealand,
Singapore and South Africa.)
4
5
SOUND & LANGUAGE CONTROL
138
1
Select OPTION.
Select your desired language.
Select OPTION.
2
Select Country(Only
Australia & New
Zealand).
3
4
Select your country.
Save.
Save.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
NOTE
►►If you do not finish the set-up Installation Guide by pressing BACK or if you time out on the OSD (On
Screen Display) the installation menu will continuously appear until the set up is completed whenever the
TV is switched on.
►►If you select the wrong local country, teletext may not appear correctly on the screen and some problems
may occur during teletext operation.
►►DTV mode control buttons may not function based on country broadcasting circumstances. (Only DTV)
►►In country that Digital broadcasting regulation isn’t fixed, some DTV function may not work depending on
digital broadcasting circumstances. (Only DTV)
LANGUAGE SELECTION (IN DIGITAL MODE ONLY)
(Only DTV)
The Audio function allows selection of a preferred language.
If audio data in a selected language is not broadcast, the default language audio will be played.
Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a
selected language is not broadcast, the default language subtitle will be displayed.
When the languages you selected as the primary for Audio Language and Subtitle Language and Text
Language are not supported, you can select language in secondary category (Only New Zealand).
In Digital mode, use the Text language function when two or more Text languages are broadcast. If teletext data in a selected language is not broadcast, the default Text language will be displayed.
1
2
Select Language(Language).
3
4
Select Audio Language or Subtitle
Language or Text Language.
Select OPTION.
2
Select Hard of Hearing(
3
).
Select On or Off.
Select your desired language.
NOTE
Save.
►► It is only available to use Hard of Hearing
on some TV stations in New Zealand.
• Press the BACK button to move to the previous menu screen.
SOUND & LANGUAGE CONTROL
5
1
Select OPTION.
139
SOUND & LANGUAGE CONTROL
< Audio Language Selection >
►►When two or more audio languages are broadcast, you can
select the audio language.
1
2
3
Audio Language OSD Information
Display
N.A
Status
Not Available
MPEG Audio
Dolby Digital Audio
Select Quick Menu.
Audio for “Visual Impaired”
Audio for “Hearing Impaired”
Dolby Digital Plus Audio
Select Audio or Audio Language.
HE-AAC
HE-AAC Audio
Select an audio language.
< Subtitle Language Selection >
►►When two or more subtitle languages are broadcast, you
can select the subtitle language with the SUBTITLE button
on the remote control.
►►Press the
button to select a subtitle language.
Subtitle Language OSD Information
Display
N.A
Status
Not Available
Teletext Subtitle
Subtitle for “Hard of Hearing”
- The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the
service provider.
- When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the TV may output
a part of the Main audio.
SOUND & LANGUAGE CONTROL
140
Analogue
TV
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license
from Dolby Laboratories.
Dolby and the double-D
symbol are trademarks of
Dolby Laboratories.
Digital TV
• There is a possibility that when HDMI
mode, some DVD players do not make
SPDIF sound. At that time, set the output of the digital audio of the DVD player
to PCM. (In HDMI, Dolby Digital Plus is
not supported).
TIME SETTING
CLOCK SETUP
The clock is set automatically when receiving a digital signal in Auto mode. You can set the clock
manually in Manual mode.
You must set the time correctly before using on/off timer function.
< Only Australia >
When you select a Time Zone city, the TV time is set by the time offset information based on Time
Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is
set automatically by a digital signal.
<Only Indonesia, Israel>
GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.
Time Zone is activated only in Auto Mode.
■■ Image shown may differ from your TV.
TIME
Move
►
● Clock
TIME
OK
Move OK OK
◄Move
● Clock
Date
►
Auto
● Off
Time
: Off
● Off
Time
: Off
Month
Mar.
● On
Time
: Off
● On
Time
: Off
● Sleep
: Off
Year
: Off
Hour
2008
● Sleep
Timer
Timer
Only DTV
3
16
Minute
09
Time Zone
NSW/ACT
GMT+10.0
Close
Only Australia, Indonesia and Israel
2
3
4
5
Select TIME.
Select Clock.
TIME SETTING
1
Select Auto or Manual. (Only DTV)
Select either the year, month, date, time or Time Zone(Only Australia, Indonesia and
Israel) option.
Set the year, month, date, time or Time Zone (Only Australia, Indonesia and Israel)
option.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
141
TIME SETTING
AUTO ON/OFF TIME SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed.
The Off time function overrides the On time function if both are set to the same time.
The TV must be in standby mode for the On time to work.
TIME
Move
TIME
OK
● Clock
Time
: Off
● Off
● On Time
: Off
● On Time
● Sleep
: Off
►
Timer
►
● Off
Move
● Clock
Time
● Sleep
Timer
OK
1 Mar 2007 16:09
: Off
Repeat
◄
Off
: Off
Hour
00
: Off
Minute
00
Input
►
Antenna
Programme
TV1
Volume
30
Close
1
2
TIME SETTING
3
4
5
6
•T
o cancel On/Off Time function, select Off.
Select TIME.
•F
or On Time function only
Select Off Time or On Time.
2
Select Repeat.
Select Off, Once, Daily, Mon. ~ Fri.,
Mon. ~ Sat., Sat. ~ Sun. or Sun..
Set the hour.
1
3
4
Select Input.
Select the input source.
Set the programme.
Adjust volume level at switch-on.
Set the minutes.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
142
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
1
2
3
Select Quick Menu.
Select Sleep Timer.
Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 min.
•W
hen you switch the TV off, the preset sleep timer is cancelled.
•Y
ou can also adjust Sleep Timer in the TIME menu.
TIME SETTING
143
PARENTAL CONTROL / RATINGS
SET PASSWORD & LOCK SYSTEM
Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset.
If a channel is locked, enter the password to unlock it temporarily.
● Set
LOCK
OK
Password
● Set
: Off
● Block
● Parental
● Input
►
Lock
►
● Lock System
● Key
1
Move
Programme
Guidance: Blocking Off
Block
: Off
OK
Password
Off
● Lock System
: Off
● Block
● Parental
● Input
● Key
Lock
Programme
On
Teletext
Guidance: Blocking Off
Block
: Off
• If you forget your password, press ‘0’, ‘3’,
Select LOCK.
2
Move
►
LOCK
‘2’, ‘5’ on the remote control handset.
Select Lock System.
3
Select On.
PARENTAL CONTROL /
RATINGS
4
Set the password.
5
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
0
Input a 4-digit password.
Be sure to remember this number!
Re-enter new password for confirm.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
144
BLOCK PROGRAMME
Blocks any programme that you do not want to watch or that you do not want your children to watch.
It is available to use this function in Lock System ”On”.
Enter a password to watch a blocked programme.
■■ Image shown may differ from your TV.
Programme Edit
LOCK
● Set
Move
System
: On
● Block
● Parental
● Input
● Key
Lock
Programme
▲
▼
Page 1/1
C
RADIO
DTV
OK
Password
● Lock
Favourite Group :
TV
1 Nine Digital
2 Nine Digital HD
3 Nine Guide
4 7 Digital
5 7 HD Digital
6 7 Digital 1
7 7 Digital2
8 7 Digital3
9 7 Guide
Guidance: Blocking Off
Block
: Off
Pr. Change
Navigation
P
Page Change
Previous
Block/Unblock
1
Select LOCK.
2
3
5
Select Block Programme.
Enter the Block Programme.
YELLOW
Select a programme to be locked.
PARENTAL CONTROL /
RATINGS
4
Select Lock System.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
145
PARENTAL CONTROL / RATINGS
PARENTAL CONTROL (IN DIGITAL MODE ONLY) (Only DTV)
This function operates according to information from the broadcasting station. Therefore if the signal
has incorrect information, this function does not operate.
A password is required to gain access to this menu.
This set is programmed to remember which option it was last set to even if you switch the set off.
Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
Enter a password to watch a blocked programme.
Rating differs by country.
LOCK
● Set
Move
Password
● Lock
System
● Set
: On
● Block
● Parental
● Input
● Key
Lock
Programme
Guidance: Blocking Off
▲
▼
Block
Move
OK
programmes
Password
● Lock
Blocking Off : Permits all
LOCK
OK
System
● Block
● Parental
: Off
● Key
Lock
▲
Block All
: On
Programme
G
PG
Guidance: Blocking Off
M
● Input Block
MA
: Off
AV
▲
▼
R
Blocking Off
1
2
3
PARENTAL CONTROL /
RATINGS
4
Select LOCK.
Select Lock System.
Select Parental Guidance.
Make appropriate adjustments.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
146
EXTERNAL INPUT BLOCKING
Enables you to block an input.
It is available to use this function in Lock System ”On”.
LOCK
● Set
Move
Password
● Lock
System
: On
● Block
● Parental
● Input
Lock
LOCK
Move
● AV1
● Set
● AV2
Password
● Lock
● Key
OK
Programme
Guidance: Blocking Off
Block
▲
▼
: Off
System
: On
● Block
● Parental
● Input
● Key
Lock
: Off
OK
◄
Off
● Component1
Off
● Component2
Off
Programme
Guidance: Blocking Off
● RGB
Block
● HDMI1
►
Off
▲
▼
Off
Off
● HDMI2
Off
● HDMI3
Off
Close
1
2
3
4
5
Select LOCK.
Select Lock System.
Select Input Block.
Select input source.
Select On or Off.
PARENTAL CONTROL /
RATINGS
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
147
PARENTAL CONTROL / RATINGS
KEY LOCK
This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so
that it can only be used with the remote control.
This TV is programmed to remember which option it was last set to even if you turn the TV off.
LOCK
Password
● Lock
2
3
: Off
● Lock
● Block
● Parental
● Input
Lock
Programme
Guidance: Blocking Off
Block
: Off
Select LOCK.
Select Key Lock.
Select On or Off.
Move
OK
Password
System
: Off
● Block
● Parental
Programme
● Input
● Key Lock
: Off
: Off
Guidance: Blocking Off
Block
MHEG
Off
►
1
System
● Set
● Key
LOCK
OK
►
● Set
Move
On
• In Key Lock ‘On’, if the TV is turned off, press the
/ I, INPUT, P
button on the TV or POWER
or NUMBER buttons on the remote
INPUT, P
control then the set will be turned on.
• With the Key Lock On, the display ‘
Key
Lock On ’ appears on the screen if any button on
the front panel is pressed while viewing the TV.
• When another OSD is displayed, ‘
Key Lock
On ’ will not operate.
PARENTAL CONTROL /
RATINGS
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
148
TELETEXT
This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives up-to-theminute information on news, weather, television programmes, share prices and
many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT
systems. SIMPLE (standard teletext) consists of a number of pages which are
selected by directly entering the corresponding page number. TOP and
FASTEXT are more modern methods allowing quick and easy selection of
teletext information.
SWITCH ON/OFF
Press the TEXT button to switch to teletext. The initial page or last page
viewed appears on the screen.
Two page numbers, TV station name, date and time are displayed on the
screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode reappears.
SIMPLE TEXT
■■ Page selection
Enter
1
the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the
correct page number.
2 The P
button can be used to select the preceding or following page.
TELETEXT
149
TELETEXT
TOP TEXT
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow
field denotes the next group and the blue field indicates the next block.
■■ Block / group / page selection
1 With the blue button you can progress from block to block.
2 Use the yellow button to proceed to the next group with automatic overflow to the next block.
3 With the green button you can proceed to the next existing page with automatic overflow to the next
group.
button can be used.
4 Alternatively the P
The red button returns to the previous selection. Alternatively the P button can be used.
■■ Direct page selection
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using
the NUMBER buttons in TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the
corresponding coloured button.
■■Page selection
1
2
3
TELETEXT
150
4
Press the T.OPT button and then use
button to select
menu. Display the index page.
You can select the pages which are colour coded along the bottom line with corresponding
coloured buttons.
AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with
the NUMBER buttons in FASTEXT mode.
The P
button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS
Press the T. OPT button and then use
button to select the Text Option menu.
Text Option
■■Index
Select the each index page.
Index
Time
Hold
Reveal
■■Time
Update
Close
When viewing a TV programme, select this menu to display the time at the top right
hand corner of the screen.
In the teletext mode, press this button to select a sub page number. The sub page number is displayed at
the bottom of the screen. To hold or change the sub page, press the RED/GREEN,< > or NUMBER buttons.
■■ Hold
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages.
The number of sub pages and the sub page displayed is, usually, shown on the screen below the
time. When this menu is selected the stop symbol is displayed at the top left-hand corner of the
screen and the automatic page change is inactive.
■■Reveal
Select this menu to display concealed information, such as solutions to riddles or puzzles.
■■Update
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at
the top left hand corner of the screen. When the updated page is available then display will change to
the page number. Select this menu again to view the updated teletext page.
TELETEXT
151
APPENDIX
TROUBLESHOOTING
The TV does not operate properly.
The remote control
does not work
■■ Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control
directly at the TV.
■■ Ensure that the batteries are installed with correct polarity (+ to +, - to -).
■■ Install new batteries.
■■ Is the sleep timer set?
Power is suddenly
■■ Check the power control settings. Has the Power supply been interrupted.
turned off
■■ If the TV is switched on and there is no input signal, it will switch off automatically after 15 minutes.
The video function does not work.
■■ Check whether the TV is switched on.
■■ Try another channel. The problem may be with the broadcast.
No picture & No sound ■■ Is the power cord inserted correctly into the mains?
■■ Check your antenna direction and/or location.
■■ Test the mains outlet by plugging another TV into the same outlet.
Picture appears slowly ■■ This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
after switching on
■■ Adjust Colour in menu option.
No or poor colour
or poor picture
■■ Allow a sufficient distance between the TV and the VCR.
■■ Try another channel. The problem may be with the broadcast.
■■ Are the video cables installed properly?
■■ Activate any function to restore the brightness of the picture.
Horizontal/vertical bars
or picture shaking
Poor reception on
some channels
Lines or streaks
APPENDIX
152
in pictures
No picture
when connecting
HDMI
■■ Check for local interference such as an electrical appliance or power tool.
■■ Station or cable channel experiencing problems, tune to another station.
■■ Station signal is weak, reposition the antenna to receive weaker stations.
■■ Check for sources of possible interference.
■■ Check antenna (Change the position of the antenna).
■■ Check that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are
not High Speed HDMI Cable, flickering or no screen display can result. Please
use the High Speed HDMI Cable.
The audio function does not work.
Picture OK & No
sound
No output from one
of the speakers
Unusual sound from
inside the TV
No sound when connecting HDMI or USB
■■ Press the
+ or - button.
■■ Sound muted? Press MUTE button.
■■ Try another channel. The problem may be with the broadcast.
■■ Are the audio cables installed properly?
■■ Adjust Balance in menu option.
■■ A change in ambient humidity or temperature may result in an unusual noise
when the TV is switched on or off and does not indicate a fault with the TV.
■■ Check HDMI cable is High Speed HDMI Cable.
■■ Check USB cable over version 2.0.
*This feature is not available for all models.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of
range
(Invalid format)
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Screen colour is
unstable or single
colour
■■ Adjust resolution, horizontal frequency, or vertical frequency.
■■ Check the input source.
■■ Use Auto configure or adjust clock, phase, or H/V position. (Option)
■■ Check the signal cable.
■■ Reinstall the PC video card.
There is a problem with PICTURE settings.
When the user changes the picture settings, ■■ It means that the TV is currently set to Store Demo mode.
To switch to Home use mode you should do the followings:
the TV automatically
From the TV Menu, choose OPTION -> Choose Mode Setting -> Choose
converts back to the
Home use. Now, you have completed switching to the Home use mode.
initial settings after a
certain period of time.
APPENDIX
153
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is
almost dry, and then use it to wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate
before switching on.
Cleaning the Cabinet
■■ To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
■■ Do not to use a wet cloth.
Extended Absence
CAUTION
►►If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to
protect against possible damage from lightning or power surges.
APPENDIX
154
PRODUCT SPECIFICATIONS
MODELS
Dimensions
(Width x Height x
Depth)
Weight
1721,0 mm x 1126,0 mm x 410,0 mm
without stand
1721,0 mm x 1045,0 mm x 69,9 mm
with stand
without stand
79,1 kg
64,6 kg
AC 100-240 V~ 50 / 60 Hz
Operating
Temperature
Supported movie files
72LZ9700-TA
with stand
Power requirement
Environment condition
72LZ9***
Operating Humidity
0 °C to 40 °C
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Refer to p.76
■■ The specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
155
APPENDIX
New Zealand, Singapore
Television System
Digital TV
Analogue TV
DVB-T
PAL/SECAM-B/G/D/K, PAL-I
BG : VHF/UHF 1 to 69, CATV 01 to 47
Program Coverage
UHF 21 to 69
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
Australia
Television System
Program Coverage
Indonesia, Israel
Television System
DVB-T
VHF 06 to 12,
UHF 27 to 69
DVB-T
PAL B/B
B/B : VHF/UHF 0 to 75, CATV : 2 to 44
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
Program Coverage
UHF 21 to 69
Television System
DVB-T
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
South Africa
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
Program Coverage
VHF 4 to 11, 13
UHF 21 to 68
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
Veitnam, Malaysia
Television System
DVB-T
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
Program Coverage
VHF 6 to 12,
I : VHF/UHF 1 to 69, CATV 01 to 47
UHF 21 to 69
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
Iran
Television System
DVB-T
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
Program Coverage
VHF 5 to 12,
I : VHF/UHF 1 to 69, CATV 01 to 47
UHF 21 to 69
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
Analogue model
Television System
-
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
Program Coverage
-
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
External Antenna
Impedance
APPENDIX
156
75 Ω
75 Ω
■■ The specifications shown above may be changed without prior notice for quality improvement.
IR CODES
This feature is not available for all models.
Code (Hexa)
Function
Note
95
Energy Saving
R/C BUTTON
08
POWER
R/C BUTTON(POWER ON/OFF)
0B
INPUT
R/C BUTTON
79
RATIO
R/C BUTTON
F0
TV/RAD
R/C BUTTON
45
Q.MENU
R/C BUTTON
43
MENU
R/C BUTTON
AB
GUIDE
R/C BUTTON
40
Up (ꕌ)
R/C BUTTON
41
Down (ꕍ)
R/C BUTTON
07
Left (<)
R/C BUTTON
06
Right (>)
R/C BUTTON
44
OK(ꔉ)
R/C BUTTON
28
BACK
R/C BUTTON
5B
EXIT
R/C BUTTON
AA
INFO i
R/C BUTTON
30
AV MODE
R/C BUTTON
02
+
R/C BUTTON
03
-
R/C BUTTON
1E
FAV/MARK/CHAR/NUM
R/C BUTTON
09
MUTE/DELETE
R/C BUTTON
00
P ꕌ / PAGE ꕌ
R/C BUTTON
01
P ꕍ /PAGE ꕍ
R/C BUTTON
10~19
Number Key 0~9
R/C BUTTON
53
LIST
R/C BUTTON
1A
Q.VIEW
R/C BUTTON
72
RED Key
R/C BUTTON
71
GREEN Key
R/C BUTTON
63
YELLOW Key
R/C BUTTON
61
BLUE Key/(L/R SELECT)
R/C BUTTON
20
TEXT
R/C BUTTON
21
T.OPT(T.Option)
R/C BUTTON
39
SUBTITLE
R/C BUTTON
7E
SIMPLINK
R/C BUTTON
NetCast
R/C BUTTON
▀
R/C BUTTON
B0
►
R/C BUTTON
BA
ll
R/C BUTTON
8F
◄◄
R/C BUTTON
8E
►►
R/C BUTTON
DC
3D
R/C BUTTON
APPENDIX
59
B1
157
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an
A/V control system) to control the product’s functions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
Note: RS-232C connection cables are not supplied
with the product.
Type of Connector; D-Sub 9-Pin Male
No.
1
2
3
4
5
6
7
8
9
Pin Name
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
1
5
6
9
RS-232C Configurations
3-Wire Configurations(Not standard)
7-Wire Configurations (Standard RS-232C cable)
APPENDIX
158
RXD TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’. ► p.164
OPTION
● Country
● Country
: Australia
of Hearing (ꔞ): Off
Setting
Blaster
Reset
◄
::11
: Home Use
● Mode
: Home Use
: Off
● IR
►
● Set ID
►
● Mode
: Australia
Indicator
● Factory
::11
OK
of Hearing (ꔞ): Off
● Power
Reset
● Set ID
● IR
● Hard
Indicator
● Factory
3
Move
● Language(Language)
● Power
2
OPTION
OK
● Language(Language)
● Hard
1
Move
Setting
Blaster
: Off
1
►
Close
Select OPTION.
Select Set ID.
Adjust Set ID to choose the desired TV ID number.
The adjustment range of SET ID is 1 to 99.
APPENDIX
• Press the BACK button to move to the previous menu screen.
159
APPENDIX
Communication Parameters
■■ Baud rate : 9600 bps (UART)
■■ Data length : 8 bits
■■ Parity : None
■■ Stop bit : 1 bit
■■ Communication code : ASCII code
■■ Use a crossed (reverse) cable.
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
Command Reference List
COMMAND COMMAND
1
2
01. Power
APPENDIX
160
k
DATA
(Hexadecimal)
a
00 to 01
02. Aspect Ratio
k
c
Refer to p. 161
03. Screen Mute
k
d
Refer to p. 161
04. Volume Mute
k
e
00 to 01
05. Volume Control
k
f
00 to 64
06. Contrast
k
g
00 to 64
07. Brightness
k
h
00 to 64
08. Colour
k
i
00 to 64
09. Tint
k
j
00 to 64
10. Sharpness
k
k
00 to 64
11. OSD Select
k
l
00 to 01
12. Remote control lock mode
k
m
00 to 01
13. Treble
k
r
00 to 64
14. Bass
k
s
00 to 64
15. Balance
k
t
00 to 64
16. Colour Temperature
x
u
00 to 64
17. Energy Saving
j
q
00 to 05
18. Auto Configuration
j
u
01
19. Tune Command
m
a
Refer to p. 163
20. Programme Add/Skip
m
b
00 to 01
21. Key
m
c
Key Code
22. Control Back Light
m
g
00 to 64
23. Input select (Main)
x
b
Refer to p. 164
* [Command 1] : First command to control the TV.
(j, k, m or x)
* [Command 2] : Second command to control the TV.
: You can adjust the set ID to choose
* [Set ID]
desired monitor ID number in option
menu. Adjustment range is 1 to 99.
When selecting Set ID ‘0’, every connected set is controlled.
Set ID is indicated as decimal (1 to 99)
on menu and as Hexa decimal (0x1 to
0x63) on transmission/receiving protocol.
[DATA]
:
To
transmit command data.
*
Transmit ‘FF’ data to read status of command.
: Carriage Return
* [Cr] ASCII code ‘0x0D’
: ASCII code ‘space (0x20)’
* [ ]
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based
on this format when receiving normal data. At this
time, if the data is data read mode, it indicates
present status data. If the data is data write mode,
it returns the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* Note : During USB operations such as DivX or EMF, all * The set transmits ACK (acknowledgement) based
commands except Power(ka) and Key(mc) are not exe- on this format when receiving abnormal data from
non-viable functions or communication errors.
cuted and treated as NG.
Data00: Illegal Code
01. Power (Command: k a)
►► To control Power On/Off of the set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data00 : Power Off
Ack
01 : Power On
[a][ ][Set ID][ ][OK/NG][Data][x]
►► To show Power On/Off.
Transmission
►► To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack
[e][ ][Set ID][ ][OK/NG][Data][x]
[k][a][ ][Set ID][ ][FF][Cr]
05. Volume Control (Command: k f)
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
* Similarly, if other functions transmit ‘0xFF’ data
based on this format, Acknowledgement data feed
back presents status about each function.
* OK Ack., Error Ack. and other message may display on the screen when TV is power On.
02. Aspect Ratio (Command: k c) (Main Picture Size)
►► To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen (4:3)
02 : Wide screen (16:9)
04 : Zoom
06 : Original
Ack
04. Volume Mute (Command: k e)
07 : 14:9
09 : Just Scan
0B : Full Wide
10 to 1F : Cinema Zoom 1 to 16
[c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50Hz /
60 Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60 Hz),
Component( 720p, 1080i, 1080p 50 Hz / 60 Hz)
mode, Just Scan is available.
* Full Wide is supported only for DTV mode.
03. Screen Mute (Command: k d)
►► To select screen mute on/off.
Transmission
Ack
[d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
[k][f][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping’. See page 164.
Ack
[f][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping’. See page 164.
Ack
[g][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
►► To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping’. See page 164.
Ack
[h][ ][Set ID][ ][OK/NG][Data][x]
08. Colour (Command: k i)
►► To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping’. See page 164.
Ack
[i][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
[k][d][ ][Set ID][ ][Data][Cr]
Data00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
►► To adjust volume.
You can also adjust volume with the VOLUME buttons on remote control.
Transmission
161
APPENDIX
09. Tint (Command: k j)
►► To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission
13. Treble (Command: k r)
►► To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
[k][r][ ][Set ID][ ][Data][Cr]
DataRed : 00 to Green : 64
* Refer to ‘Real data mapping’. See page 164.
Ack
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping’. See page 164.
[j][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
►► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping’. See page 164.
Ack
[k][ ][Set ID][ ][OK/NG][Data][x]
Ack
[r][ ][Set ID][ ][OK/NG][Data][x]
14. Bass (Command: k s)
►► To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping’. See page 164.
Ack
[s][ ][Set ID][ ][OK/NG][Data][x]
15. Balance (Command: k t)
11. OSD Select (Command: k l)
►► To select OSD (On Screen Display) on/off when controlling remotely.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
Ack
01 : OSD on
►► To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping’. See page 164.
Ack
[t][ ][Set ID][ ][OK/NG][Data][x]
[l][ ][Set ID][ ][OK/NG][Data][x]
16. Colour Temperature (Command: x u)
12. Remote control lock mode (Command: k m)
►► To lock the front panel controls on the monitor and
remote control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data00 : Lock off
Ack
APPENDIX
162
01 : Lock on
[m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this
mode.
When main power is on/off, external control lock is
released.
* In the standby mode, if key lock is on, TV will not
turn on by power on key of IR & Local Key.
►► To adjust colour temperature. You can also adjust Colour
Temperature in the PICTURE menu.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping’. See page 164.
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
17. Energy Saving (Command: j q)
19.Tune Command (Command: m a)
►► To reduce the power consumption of the TV. You can
also adjust Energy Saving in PICTURE menu.
Transmission
►► Select channel to following physical number.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data00 :High channel data
Data01 :Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 8A (18AH),
DTV No. 0 -> Don’t care
Data02 :0x00 : Analogue Main
0x10 : DTV Main
0x20 : Radio
Channel data range
Analogue - Min: 00 to Max: 63 (0 to 99)
Digital - Min: 00 to Max: 3E7 (0 to 999)
Power Saving
Function
Level
Description
7
6
5
4
3
2
1
0
0
0
0
0
Low Power
0
0
0
0
Off
0
0
0
0
Low Power
0
0
0
1
Minimum
0
0
0
0
Low Power
0
0
1
0
Medium
0
0
0
0
Low Power
0
0
1
1
Maximum
0
0
0
0
Low Power
0
1
0
0
Auto
0
0
0
0
Low Power
0
1
0
1
Screen Off
Ack
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
DataMin: 00 to Max: 7DH
[q][ ][Set ID][ ][OK/NG][Data][x]
20. Programme Add/Skip(Command: m b)
►► To set skip status for the current Programme.
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip
01 : Add
Ack
18. Auto Configure(Command: j u)
[b][ ][Set ID][ ][OK/NG][Data][x]
►► To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data01: To set
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
163
APPENDIX
21. Key(Command: m c)
►► To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
DataKey code - Refer to page 157.
Ack
[c][ ][Set ID][ ][OK/NG][Data][x]
23. Input select (Command: x b)
(Main Picture Input)
►► To select input source for main picture.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
DataStructure
MSB
0
22. Control Back Light (Command: m g)
►► To Control the back light.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data: data Min: 00 to Max: 64
Ack
[g][ ][Set ID][ ][OK/NG][Data][x]
LSB
0
0
0
0
0
0
External Input
Input Number
External Input
Data
0
0
0
0
DTV
0
0
0
1
Analogue
0
0
1
0
AV
0
1
0
0
Component
0
1
1
0
RGB
0
1
1
1
1
0
0
0
1
0
0
1
1
0
1
0
Input Number
HDMI
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Ack
* Real data mapping
00 : Step 0
A:
Step 10 (Set ID 10)
F:
10 :
Step 15 (Set ID 15)
Step 16 (Set ID 16)
64 :
Step 100
6E : Step 110
APPENDIX
164
73 :
74 :
Step 115
Step 116
CF : Step 199
FE : Step 254
FF : Step 255
[b][ ][Set ID][ ][OK/NG][Data][x]
0
OPEN SOURCE SOFTWARE NOTICE
The following GPL executables and LGPL, MPL libraries used in this product are subject to the
GPL2.0/LGPL2.1/MPL1.1 License Agreements:
GPL EXECUTABLES:
Linux kernel 2.6, busybox, e2fsprogs, jfsutils, lzo, msdl-1.1, mtd-utils, ntpclient, procps
LGPL LIBRARIES:
Atk, cairo, directFB, ffmpeg, glib, GnuTLS, gtk+, iconv, libintl, libgcrypt, libgpg-error, libsoup, libusb,
pango, uClibc, webkit
MPL LIBRARIES:
Nanox, spidermonkey
LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of
performing such distribution, such as the cost of media, shipping and handling upon e-mail request
to LG Electronics : opensource@lge.com
This offer is valid for a period of three (3) years from the date of the distribution of this product by
LG Electronics.
You can obtain a copy of the GPL, LGPL, MPL licenses on the CD-ROM provided with this product.
Also you can obtain the translation of GPL, LGPL licenses from
http://www.gnu.org/licenses/old-licenses/gpl-2.0-translations.html,
http://www.gnu.org/licenses/old-licenses/lgpl-2.1-translations.html.
APPENDIX
This product includes other open source software.
■■ boost C++: software developed by http://www.boost.org distributed under the Boost Software
License, Version 1.0
■■ c-ares : copyright © 1998 by the Massachusetts Institute of Technology
■■ expat:
• copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper
• copyright © 2001-2007 Expat maintainers.
■■ fontconfig: copyright © 2001, 2003 Keith Packard
■■ freetype: copyright © 2003 The FreeType Project (www.freetype.org).
■■ ICU: copyright © 1995-2008 International Business Machines Corporation and others.
■■ libcurl: copyright © 1996 - 2008, Daniel Stenberg.
■■ libjpeg: This software is based in part on the work of the Independent JPEG Group copyright
© 1991 – 1998, Thomas G. Lane.
■■ libmng: copyright © 2000-2007 Gerard Juyn, Glenn Randers-Pehrson
■■ libpng: copyright © 1998-2008 Glenn Randers-Pehrson
■■ libupnp: copyright © 2000-2003 Intel Corporation
■■ libxml2 : copyright © 1998-2003 Daniel Veillard
■■ libxslt: copyright © 2001-2002 Daniel Veillard
■■ lua interpreter: copyright © 1994–2008 Lua.org, PUC-Rio
■■ md5: copyright © 1991-2, RSA Data Security, Inc
■■ openSSL:
• cryptographic software written by Eric Young.
165
APPENDIX
• software written by Tim Hudson.
• software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org)
■■ pixman:
• copyright © 1987, 1988, 1989, 1998 The Open Group
• copyright © 1987, 1988, 1989 Digital Equipment Corporation
• copyright © 1999, 2004, 2008 Keith Packard
• copyright © 2000 SuSE, Inc.
• copyright © 2000 Keith Packard, member of The XFree86 Project, Inc.
• copyright © 2004, 2005, 2007, 2008 Red Hat, Inc.
• copyright © 2004 Nicholas Miell
• copyright © 2005 Lars Knoll & Zack Rusin, Trolltech
• copyright © 2005 Trolltech AS
• copyright © 2007 Luca Barbato
• copyright © 2008 Aaron Plattner, NVIDIA Corporation
• copyright © 2008 Rodrigo Kumpera
• copyright © 2008 André Tupinambá
• copyright © 2008 Mozilla Corporation
• copyright © 2008 Frederic Plourde
■■ portmap: copyright © 1983,1991 The Regents of the University of California.
■■ tiff: copyright © 1987, 1993, 1994 The Regents of the University of California.
■■ tinyxml: copyright © 2000-2006 Lee Thomason
■■ xyssl:
• copyright © 2006-2008 Christophe Devine
• copyright © 2009 Paul Bakker
■■ zlib: copyright © 1995-2005 Jean-loup Gailly and Mark Adler
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
APPENDIX
166
OPEN SOURCE LICENSE
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This General Public License applies to most of the Free
Software Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it if you want it, that you can change the software or
use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software,
or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all
the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show
them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so that any problems introduced by others will not
reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors
of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the Program (independent of having been made by running
the Program). Whether that is true depends on what the Program does.
APPENDIX
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The "Program", below, refers to any such program
or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that
is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into
another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is
addressed as "you".
167
APPENDIX
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of
any warranty; and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all
of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this
License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running
for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may
redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception:
if the Program itself is interactive but does not normally print such an announcement, your work based on the
Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on
the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this
License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than
your cost of physically performing source distribution, a complete machine-readable copy of the corresponding
source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)
APPENDIX
168
The source code for a work means the preferred form of the work for making modifications to it. For an executable
work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs,
unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even though
third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or rights, from you under this License will
not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not
accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the
Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You
may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the
Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it
and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system, which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems
or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which
applies to it and "any later version", you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software Foundation.
APPENDIX
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to
the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
169
APPENDIX
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve
this is to make it free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most
effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to
where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later
version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the
Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO
WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain
conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License.
Of course, the commands you use may be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer"
for the program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker.
APPENDIX
170
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If your program is a
subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is
what you want to do, use the GNU Lesser General Public License instead of this License.
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not
allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public
License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically
libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest
you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in
any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are
designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you
wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of
it in new free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to
surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the
library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the
rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code
with the library, you must provide complete object files to the recipients, so that they can relink them with the library
after making changes to the library and recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which
gives you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the
library is modified by someone else and passed on, the recipients should know that what they have is not the original
version, so that the original author's reputation will not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a
company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder.
Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom
of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license,
the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary
General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free
programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is
legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore
permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits
more lax criteria for linking other code with the library.
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the
ordinary General Public License. It also provides other free software developers Less of an advantage over competing
non-free programs. These disadvantages are the reason we use the ordinary General Public License for many
libraries. However, the Lesser license provides advantages in certain special circumstances.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use
a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many
more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
APPENDIX
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library,
so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more
frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to
gain by limiting the free library to free software only, so we use the Lesser General Public License.
171
APPENDIX
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a
program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from
the library, whereas the latter must be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the
copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public
License (also called "this License"). Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work which has been distributed under these terms. A
"work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work
containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into
another language. (Hereinafter, translation is included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus
the scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running a program using the Library is not restricted, and output from such a program is covered only if its
contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether
that is true depends on what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection
in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all
of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of
any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this
License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program
that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good
faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates,
and performs whatever part of its purpose remains meaningful.
APPENDIX
172
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of
the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function
must be optional: if the application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the
Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy
of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU
General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other
change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License
applies to all subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding
machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent
access to copy the source code from the same place satisfies the requirement to distribute the source code, even
though third parties are not compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being
compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of
the Library, and therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library
(because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the
work may be a derivative work of the Library even though the source code is not.
Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library.
The threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and
small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it
is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under
Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with
the Library itself.
6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library
to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that
the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its
use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the
user to the copy of this License. Also, you must do one of these things:
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at
run time a copy of the library already present on the user's computer system, rather than copying library functions
into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as
long as the modified version is interface-compatible with the version that the work was made with.
APPENDIX
a) Accompany the work with the complete corresponding machine-readable source code for the Library including
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object
code and/or source code, so that the user can modify the Library and then relink to produce a modified executable
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application to use the modified definitions.)
173
APPENDIX
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to
copy the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
For an executable, the required form of the "work that uses the Library" must include any data and utility programs
needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need
not include anything that is normally distributed (in either source or binary form) with the major components (compiler,
kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies
the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in
an executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with
other library facilities not covered by this License, and distribute such a combined library, provided that the separate
distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that
you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other
library facilities. This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and
explaining where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this
License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept
this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or
works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a
license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the
Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and
this License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
APPENDIX
174
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which
applies to it and "any later version", you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Library does not specify a license version number,
you may choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible
with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two
goals of preserving the free status of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE
COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it
free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or,
alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file
to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer
to where the full notice is found.
<one line to give the library's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General
Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any
later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the
Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by
James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
APPENDIX
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer"
for the library, if necessary. Here is a sample; alter the names:
175
APPENDIX
MOZILLA PUBLIC LICENSE
Version 1.1
--------------1. Definitions.
1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party.
1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications.
1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor,
and the Modifications made by that particular Contributor.
1.3. "Covered Code" means the Original Code or Modifications or the combination of the Original Code and
Modifications, in each case including portions thereof.
1.4. "Electronic Distribution Mechanism" means a mechanism generally accepted in the software development community for the electronic transfer of data.
1.5. "Executable" means Covered Code in any form other than Source Code.
1.6. "Initial Developer" means the individual or entity identified as the Initial Developer in the Source Code notice
required by Exhibit A.
1.7. "Larger Work" means a work which combines Covered Code or portions thereof with code not governed by the
terms of this License.
1.8. "License" means this document.
1.8.1. "Licensable" means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein.
1.9. "Modifications" means any addition to or deletion from the substance or structure of either the Original Code or
any previous Modifications. When Covered Code is released as a series of files, a Modification is:
A. Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.
B. Any new file that contains any part of the Original Code or previous Modifications.
1.10. "Original Code" means Source Code of computer software code which is described in the Source Code notice
required by Exhibit A as Original Code, and which, at the time of its release under this License is not already
Covered Code governed by this License.
1.10.1. "Patent Claims" means any patent claim(s), now owned or hereafter acquired, including without limitation,
method, process, and apparatus claims, in any patent Licensable by grantor.
1.11. "Source Code" means the preferred form of the Covered Code for making modifications to it, including all
modules it contains, plus any associated interface definition files, scripts used to control compilation and installation
of an Executable, or source code differential comparisons against either the Original Code or another well known,
available Covered Code of the Contributor's choice. The Source Code can be in a compressed or archival form,
provided the appropriate decompression or de-archiving software is widely available for no charge.
1.12. "You" (or "Your") means an individual or a legal entity exercising rights under, and complying with all of the
terms of, this License or a future version of this License issued under Section 6.1.
For legal entities, "You" includes any entity which controls, is controlled by, or is under common control with You.
For purposes of this definition, "control" means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the outstanding shares or beneficial ownership of such entity.
APPENDIX
176
2. Source Code License.
2.1. The Initial Developer Grant.
The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellectual property claims:
(a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use,
reproduce, modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with or
without Modifications, and/or as part of a Larger Work; and
(b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use,
practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof).
(c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes
Original Code under the terms of this License.
(d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the
Original Code; 2) separate from the Original Code; or 3) for infringements caused by: i) the modification of the
Original Code or ii) the combination of the Original Code with other software or devices.
2.2. Contributor Grant.
Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free,
non-exclusive license
(a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce, modify, display, perform, sublicense and distribute the Modifications created by such Contributor (or portions thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a
Larger Work; and
(b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor
either alone and/or in combination with its Contributor Version (or portions of such combination), to make, use,
sell, offer for sale, have made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions
thereof); and 2) the combination of Modifications made by that Contributor with its Contributor Version (or portions of such combination).
(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes
Commercial Use of the Covered Code.
(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has deleted from the Contributor Version; 2) separate from the Contributor Version; 3) for infringements caused by: i)
third party modifications of Contributor Version or ii) the combination of Modifications made by that Contributor
with other software (except as part of the Contributor Version) or other devices; or 4) under Patent Claims
infringed by Covered Code in the absence of Modifications made by that Contributor.
3. Distribution Obligations.
3.1. Application of License.
The Modifications which You create or to which You contribute are governed by the terms of this License, including
without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of
this License or a future version of this License released under Section 6.1, and You must include a copy of this
License with every copy of the Source Code You distribute. You may not offer or impose any terms on any Source
Code version that alters or restricts the applicable version of this License or the recipients' rights hereunder.
However, You may include an additional document offering the additional rights described in Section 3.5.
3.2. Availability of Source Code.
Any Modification which You create or to which You contribute must be made available in Source Code form under
the terms of this License either on the same media as an Executable version or via an accepted Electronic
Distribution Mechanism to anyone to whom you made an Executable version available; and if made available via
Electronic Distribution Mechanism, must remain available for at least twelve (12) months after the date it initially
became available, or at least six (6) months after a subsequent version of that particular Modification has been
made available to such recipients. You are responsible for ensuring that the Source Code version remains available
even if the
Electronic Distribution Mechanism is maintained by a third party.
3.3. Description of Modifications.
You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to
create that Covered Code and the date of any change. You must include a prominent statement that the Modification
is derived, directly or indirectly, from Original Code provided by the Initial Developer and including the name of the
Initial Developer in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in
which You describe the origin or ownership of the Covered Code.
APPENDIX
3.4. Intellectual Property Matters
(a) Third Party Claims.
If Contributor has knowledge that a license under a third party's intellectual property rights is required to exercise
the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the
Source Code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient
detail that a recipient will know whom to contact. If Contributor obtains such knowledge after the Modification is
made available as described in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies
Contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or
newsgroups) reasonably calculated to inform those who received the Covered Code that new knowledge has
been obtained.
177
APPENDIX
(b) Contributor APIs.
If Contributor's Modifications include an application programming interface and Contributor has knowledge of
patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file.
(c) Representations.
Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that
Contributor's Modifications are Contributor's original creation(s) and/or Contributor has sufficient rights to grant
the rights conveyed by this License.
3.5. Required Notices.
You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a
particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant
directory) where a user would be likely to look for such a notice. If You created one or more Modification(s)
You may add your name as a Contributor to the notice described in Exhibit A. You must also duplicate this License
in any documentation for the Source Code where You describe recipients' rights or ownership rights relating to
Covered Code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations
to one or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of
the Initial
Developer or any Contributor. You must make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by You alone, and You hereby agree to indemnify the Initial Developer and every Contributor
for any liability incurred by the Initial Developer or such Contributor as a result of warranty, support, indemnity or liability terms You offer.
3.6. Distribution of Executable Versions.
You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for
that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License, including a description of how and where You have fulfilled the obligations of
Section 3.2. The notice must be conspicuously included in any notice in an Executable version, related documentation or collateral in which You describe recipients' rights relating to the Covered Code. You may distribute the
Executable version of Covered Code or ownership rights under a license of Your choice, which may contain terms
different from this License, provided that You are in compliance with the terms of this License and that the license
for the Executable version does not attempt to limit or alter the recipient's rights in the Source Code version from
the rights set forth in this
License. If You distribute the Executable version under a different license You must make it absolutely clear that any
terms which differ from this License are offered by You alone, not by the Initial Developer or any Contributor. You
hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial
Developer or such Contributor as a result of any such terms You offer.
3.7. Larger Works.
You may create a Larger Work by combining Covered Code with other code not governed by the terms of this
License and distribute the Larger Work as a single product. In such a case, You must make sure the requirements
of this License are fulfilled for the Covered Code.
4. Inability to Comply Due to Statute or Regulation.
If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered
Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in
the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code. Except to
the
extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary
skill to be able to understand it.
5. Application of this License.
This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related
Covered Code.
6. Versions of the License.
APPENDIX
178
6.1. New Versions.
Netscape Communications Corporation ("Netscape") may publish revised and/or new versions of the License from
time to time. Each version will be given a distinguishing version number.
6.2. Effect of New Versions.
Once Covered Code has been published under a particular version of the License, You may always continue to use
it under the terms of that version. You may also choose to use such Covered Code under the terms of any subsequent version of the License published by Netscape. No one other than Netscape has the right to modify the terms
applicable to Covered Code created under this License.
6.3. Derivative Works.
If You create or use a modified version of this License (which you may only do in order to apply it to code which is
not already Covered Code governed by this License), You must (a) rename Your license so that the phrases
"Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL", "NPL" or any confusingly similar phrase do not appear in
your license (except to note that your license differs from this License) and (b) otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public License and Netscape Public License. (Filling
in the name of the Initial Developer, Original Code or Contributor in the notice described in Exhibit A shall not of
themselves be deemed to be modifications of this License.)
7. DISCLAIMER OF WARRANTY.
COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE
COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NONINFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH
YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL
DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR
OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE.
NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
8. TERMINATION.
8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered
Code which are properly granted shall survive any termination of this License. Provisions which, by their nature,
must remain in effect beyond the termination of this License shall survive.
8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against
Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred
to as "Participant") alleging that:
(a) such Participant's Contributor Version directly or indirectly infringes any patent, then any and all rights granted
by such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant
terminate prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay
Participant a mutually agreeable reasonable royalty for Your past and future use of Modifications made by such
Participant, or (ii) withdraw Your litigation claim with respect to the Contributor Version against such Participant. If
within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by
the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under Sections 2.1 and/or
2.2 automatically terminate at the expiration of the 60 day notice period specified above.
(b) any software, hardware, or device, other than such Participant's Contributor Version, directly or indirectly
infringes any patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b) are
revoked effective as of the date You first made, used, sold, distributed, or had made, Modifications made by that
Participant.
8.3. If You assert a patent infringement claim against Participant alleging that such Participant's Contributor Version
directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the
initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant
under Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license.
8.4. In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by You or any distributor hereunder prior to termination shall
survive termination.
9. LIMITATION OF LIABILITY.
APPENDIX
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING
NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER
CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE,OR ANY SUPPLIER OF ANY OF SUCH PARTIES,
BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF
ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK
STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR
LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES.
THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY
RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH
LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
179
APPENDIX
10. U.S. GOVERNMENT END USERS.
The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of
"commercial computer software" and "commercial computer software documentation," as such terms are used in 48
C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June
1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein.
11. MISCELLANEOUS.
This License represents the complete agreement concerning subject matter hereof. If any provision of this License
is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This
License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise),
excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity
chartered or registered to do business in the United States of America, any litigation relating to this License shall be
subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara
County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable
attorneys' fees and expenses. The application of the United Nations Convention on Contracts for the International Sale
of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed
against the drafter shall not apply to this License.
12. RESPONSIBILITY FOR CLAIMS.
As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and
Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to
constitute any admission of liability.
13. MULTIPLE-LICENSED CODE.
Initial Developer may designate portions of the Covered Code as "Multiple-Licensed". "Multiple-Licensed" means
that the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the NPL or the alternative licenses, if any, specified by the Initial Developer in the file described in Exhibit A.
EXHIBIT A -Mozilla Public License.
``The contents of this file are subject to the Mozilla Public License Version 1.1 (the "License"); you may not use this
file except in compliance with the License. You may obtain a copy of the License at http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND,
either express or implied. See the License for the specific language governing rights and limitations under the License.
The Original Code is ______________________________________.
The Initial Developer of the Original Code is ________________________.
Portions created by ______________________ are Copyright (C) ______
_______________________. All Rights Reserved.
Contributor(s): ______________________________________.
Alternatively, the contents of this file may be used under the terms of the _____ license (the "[___] License"), in
which case the provisions of [______] License are applicable instead of those above. If you wish to allow use of your
version of this file only under the terms of the [____] License and not to allow others to use your version of this file
under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other
provisions required by the [___] License. If you do not delete the provisions above, a recipient may use your version of
this file under either the MPL or the [___] License."
APPENDIX
180
[NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the
Original Code. You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for
Your Modifications.]
APPENDIX
APPENDIX
182
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring
any service.
Model :
Serial No. :
(Only DTV)
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
Download PDF

advertising