LG | LH-C6230P | LG LH-C6230P Owner’s Manual

LH-C6230P NA1ASSS-ENG
DVD/CD/VCR RECEIVER
Home Cinema
System
OWNER'S MANUAL
MODEL: DHC 5090
CD-R/RW
PAL
Before
please
connecting up, operating or repairing this
read this instruction booklet carefully and
product,
completely.
Precautions
Safety
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
risk of electric
a
shock to persons.
The exclamation mark within
is intended to alert the
important operating
user
an
equilateral triangle
to the presence of
and maintenance
instructions in the instructions
(servicing)
accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
a
confined space
similar unit.
CAUTION:
This DVD/CD receiver
To
employs
a
Laser
System.
proper
product, please read this owner 's
carefully and retain it for future reference. Should the
require maintenance, contact an authorized service loca(see service procedure).
ensure
use
of this
manual
unit
tion
Performing controls, adjustments, or carrying out procedures
specified herein may result in hazardous radi-
other than those
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
ation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
OTES ON COPYRIGHTS:
It is forbidden
vases, should be
placed
on
the
apparatus.
SERIAL NUMBER: The serial number is located
This
product
is manufactured to
radio interference
DIRECTIVE
requirements
comply
with the
of EEC
89/336/EEC, 93/68/EEC and
to others. You should
retain this
73/23/EEC.
Model No.
Serial No.
2
on
the back
of this unit. This number is
guide
as a
unique to this unit and not available
record requested information here and
permanent record of your purchase.
___________________________________
___________________________________
Table of Contents
SpecialDVDFeatures.......................31
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
FrontPanelControls........................6
DisplayWindowIndicators...................7
RemoteControlButtons.....................8
RearPanelConnections.....................9
TitleMenu..........................31
DiscMenu..........................31
CameraAngle.......................31
.31
ChangingtheAudioLanguage.
.31
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles...........................31
32-33
Operation with Audio CD and MP3/WMA Discs
.
.
.
.32
PlayinganAudioCDandMP3/WMADiscs
NotesonMP3/WMARecordings................32
.
.
.
.
.
.
Pause.............................33
MovingtoanotherTrack...............33
RepeatTrack/All/Off...................33
Search.............................33
Preparation
Connections...........................10-14
TV & Decoder(or Set Top Box) Connections
10
Accessory Audio/Video (A/V) Connections to
DVD/CD/VCRreceiver....................11
RadioAerialConnections..................11
.
.
.
.
.
.
.
.
SpeakerSystemConnection...............12
SpeakerPositioning......................13
MiniGlossary...........................14
.15-19
BeforeOperation-VCRpart.
.
.
.
.
.
.
.
.
.
.
.
.
VideochannelSet.......................15
15
Using your receiver for the very first time
Howtousethemainmenu................16
.16
TuninginTVstationsAutomatically.
.17
TuninginTVstationsManually.
.18
ChangingtheorderofTVstations.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
DeletingTVstations......................18
SettingtheclockManually.................19
Tosetthecoloursystem..................19
.20-23
BeforeOperation-DVDpart.
GeneralExplanation......................20
On-ScreenDisplay.......................20
InitialSettings........................21-23
GeneralOperation....................21
Language..........................21
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................21
Speakersetup.......................22
Others (DRC/Vocal/PBC/Auto play)
22
.
.
.
.
.
.
.
ParentalControl......................23
Operation
RepeatA-B.........................33
3DSurround........................33
.33
ChangingtheAudioChannel.
OperationwithJPEGDisc..................34
ProgrammedPlayback.....................35
Programmed Playback with Audio CD
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
GeneralFeatures........................29
MovingtoanotherTITLE...............29
29
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................29
Still Picture and Frame-by-Frame Playback 30
SlowMotion.........................30
.
.
.
.
.
.
.
.
andMP3/WMADiscs........................35
.35
ProgrammedPlaybackwithVideoCD
.35
RepeatProgrammedTracks
.35
ErasingaTrackfromProgrammelist.
35
Erasing the Complete Programme list
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SpeakerSetup...........................36
AdditionalInformation.....................36
.37-38
AdditionalOperation-VCRpart.
OnScreenDisplay.......................37
TapeCounterMemoryStop................37
.37
FriendlyUserGuide(VideoDoctor).
ez(easy)Repeat........................37
Hi-FiStereoSoundSystem................38
.38
WidescreenCompatibility16:9.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ToSettheDecoder......................38
SpecialRecording.........................39
CopyingfromDVDtoVCR.................39
39
Recording from another video recorder
RadioOperation........................40-41
.40
PresettingtheRadioStations.
ListeningtotheRadio....................40
.
.
.
.
ToCleartheStoredRadioStations
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.40
.41
TuningintoaStationManually.
.41
TuningintoaStationAutomatically.
RDSOperation.........................41
.
OperationwithTape.....................24-28
Playingatape..........................24
.24
CM(CommercialMessage)SKIP.
OPR (Optimum Picture Response).
24
.25
InstantTimerRecording(ITR).
ShowView Systemrecording...............26
Timer recording using On Screen Display
27-28
.29-31
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............29
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Reference
LanguageCodeList.......................42
CountryCodeList.........................43
Troubleshooting........................44-45
Specifications..........................46-47
About the
symbols
for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
.
Repeat............................30
RepeatA-B.........................30
TimeSearch........................30
3DSurround........................30
Zoom..............................31
MarkerSearch.......................31
Indicates
special operating
Indicates
tips
SHOWVIEW is
and hints for
features of this unit.
making
a registered trademarks
Development Corporation.
The SHOWVIEW
Gemstar
the task easier.
of Gemstar
System is manufactured
Development Corporation.
under licence from
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
you to locate it
Audio CD
(8cm/12cmdisc)
In addition, this unit can play a SVCD, DVD-RW,
DVD+RW, Kodak PICTURE CD and CD-R or CD-RW
that contains audio titles, MP3, WMA or JPEG files.
Depending
or
itself,
some
cannot be
--
--
the conditions of the
the CD-R/RW
ment
CD-R/RW
played
recording equip(or DVD-RW, DVD+RW) disc
(or DVD-RW, DVD+RW) discs
irregularly shaped
octagonal). It may result in
or
otes
Some
use
on
(Video
Sections of
CDs
enabling
On
(e.g., heart-shaped
malfunctions.
designed by the software manufacturer,
playback features of the unit may not be available
only)
piece
assigned
musical
on a
a
video CD
track
number,
you to locate the track you want.
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
Types
There
and still
of video CDs
are
two
supplied
with
purposes may not be able to be
played
on
the
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
the DVDs and Video CDs. Some DVDs made for busi-
with the
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
unit.
Regional
Video CDs not
in the
DVDs
manufactured for
of
designed
region "2"
playback
region code
DVD software. The
some
DVDs indicates which
those discs. This unit
on
the labels of
of
player
only play DVDs
type
can
and
encoded
2
can
labeled
"ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV
screen. Some DVDs that have no region code label may
or
still be
subject
playable.
to
area
restrictions and therefore not
equipped
with PBC
(Version 1.1)
Operated
way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
code of the DVD/CD/VCR receiver and
This DVD/CD/VCR receiver is
4
or a
of DVDs and Video CDs
playback operations
other functions may be added.
Make sure to also refer to the instructions
"2"
CD and audio CD
picture
you to locate the scene you want.
A scene is composed of one or several tracks.
DVDs and Video CDs
or
play
a
audio CD. Each track is
or an
disc content
ness
enabling
easily.
Scene
(the
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
some
feature content
the unit.
on
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
accompanying
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Track
otes
on
or
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
--
(DVD only)
DVD
same
Before Use
(Continued)
Cleaning
Precautions
Fingerprints
the unit
Handling
discs
or
When
shipping the unit
The original shipping carton and packing materials may
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
and dust
the disc
on
reduce sound
with
a
clean
quality.
cloth. Wipe
Before
distort the
can
playing,
picture
clean the disc
the disc from the centre out-
wards.
INTRODUC
When
setting up the unit
picture and sound of a nearby TV, VCR, or radio
may be disturbed during playback. In this case, position
The
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
or
turn off the
the exterior surfaces clean
use
volatile
liquids,
such
as
the unit. Do not leave rubber
contact with the unit for
leave marks
Cleaning
a
insecticide spray,
plastic products in
long period of time. They will
or
the surface.
on
the unit
a
soft cloth
use a
benzene,
or
thinner,
are
moistened with
lightly
use
About
"
soft, dry cloth. If the surfaces
solution. Do not
spray intended for
a
extremely dirty,
mild detergent
strong solvents such
as
these
as
might damage
alcohol,
vinyl
records.
Symbols
About the
To clean the cabinet
Use
Do not use strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
symbol display
"
may appear on the TV
This icon means the function
manual is not available
on
the surface
About the disc
of the unit.
clear
a
picture
The DVD/CD/VCR receiver is
a high-tech, precision
optical pick-up lens and disc drive parts
are dirty or worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
applicable only
DVD
device. If the
Notes
Disc
on
Discs
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function
VCD1.1
Video CDs without the PBC
(playback control)
function
CD
Audio CDs.
MP3
MP3 disc
WMA
WMA disc
JPEG
JPEG disc
Handling
Do not touch the
Hold the disc
get
VCD2.0
for instructions
symbols
A section whose title has
To obtain
during operation.
explained in this owner's
that specific DVD video disc.
screen
on
by
playback side of the disc.
edges so that fingerprints
the
will not
the surface.
Do not stick paper
or
tape
on
the disc.
Setting
the
Output
Source
You must select one of your output
VCR) to view on the TV screen.
sources
(DVD
or
If you want to view output source of DVD deck:
Press DVD on the remote or DVD/VCR on the front panel
?
until DVD indicator
source
on
the front
panel lights
of DVD deck is viewed
on
the TV
and
output
screen.
If you want to view output source of VCR deck:
Press VCR on the remote or DVD/VCR on the front panel
?
until VCR indicator
Storing
After
discs
playing,
store the disc in its
source
on
the front
of VCR deck is viewed
panel lights
on
the TV
and
output
screen.
case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunas there may be a considerable
increase inside the car.
light,
temperature
5
Front Panel Controls
OPEN/CLOSE
Opens
or
closes the disc
(Z)
EJECT(Z)
tray.
Ejects
Remote Sensor
Point the DVD/CD/VCR receiver
playback
a
of
a
tape
or a
disc in the DVD
Press
repeatedly
temporarily.
frame-by-frame playback.
for
disc here.
COPY/MEMORY
STOP
Press to copy a DVD in the DVD
deck to a VHS tape in the VCR
Stops playback
a
radio stations
PLAY
frequency
To
into the tuner.
play
change
back
a
Cassette
FM/AM
To
of
a
(x)
disc
or
tape.
deck.
Enter
or
VCR deck
Tray (DVD deck)
Insert
tape in the VCR deck.
PAUSE/STEP(X/C)
Pause
remote control here.
Disc
the
between AM and
Insert
a
recorded
tape
or
(B)
disc.
Compartment
(VCR deck)
video cassette here.
FM bands.
Display
window
DVD/VCR indicator
Indicates the active deck.
DVD/VCR
Select
on
(output select)
of your output sources to view
the TV screen between DVD and VCR.
one
PROG/TUNING (4/3)
To scan up or down through memorized channels
to control
tracking during playing
To tune in the desired station
back
a
or
tape (VCR mode).
(Radio Mode).
REC/ITR
To record
AV3
(VIDEO
normally
IN/AUDIO IN
Connect the audio/video
or
to activate Instant Timer
(z)
Recording.
(Left/Right))
output of
an
external
source
(Audio system,
TV/Monitor, Another VCR).
Reverse SKIP/SCAN
DVD: Go to
chapter/track.
beginning
of current
chapter/track
Press and hold for two seconds for
or
a
to
(S/Q)
previous
fast
reverse
search.
VCR: Rewinds the
tape during the STOP mode
or
for fast
reverse
picture
search.
DVD: Go to NEXT
chapter/track.
Forward SKIP/SCAN (R/T)
Press and hold for two seconds for a fast
forward search.
VCR: Advances the
tape during the STOP mode
forward
or
picture
for fast
search.
VOLUME Control
STANDBY/ON indicator
Switches the DVD/CD/VCR receiver ON and OFF.
6
Turn the knob clockwise to increase
volume,
counterclockwise to decrease the volume.
Display
Window Indicators
Indicates current
A disc is loaded in the DVD deck.
audio stream.
loaded in the DVD
(Lights
when
a
disc is
deck.)
WMA disc inserted
DVD/CD/VCR receiver
mode
Indicates the unit is
radio mode.
or a
VCR timer
is in VCR timer
recording
is
recording
programmed.
DVD to VCR copy is in progress.
DVD/CD/VCR receiver is
Indicates current
surround mode.
a
tape.
Indicates the unit is
playing
Lights up when the FM
station tuned is transmitting
Recording
back
a
tape
recorded in Hi-Fi.
RDS data.
MUTE indicator
Programmed
playback active
A cassette
is loaded
in the VCR
deck.
DIGITAL
PCM WMA
PHOTO
dts
VCD
ST
II PROG
PROLOGIC
RADIO
CHP/TRK
COPY
REC
Hi-Fi
MUTE
DVD RDS
MP3 TV
RPTALLAB
Total
Indicates current
track number
or
channel number.
chapter,
playing time/Elapsed time/
Frequency/remaining time/ Current
deck status/Surround mode/Volume
etc. indicators.
Indicates the unit is TV mode.
MP3 disc inserted.
Repeat playback
mode indicators.
VCD disc inserted.
DVD disc inserted.
Lights up when a
is being received
stereo broadcast
in radio mode.
JPEG disc inserted.
7
INTRODUC
Remote Control Buttons
FM/AM Tuner select button
POWER
Switches DVD/CD/VCR receiver ON and
Select the DVD/CD/VCR receiver's tuner as the
listening choice. (FM
and AM
OFF.
bands)
OPEN/CLOSE, EJECT
(Z)
AV SELECT
Opens and closes the disc tray.
Ejects the tape in the VCR deck.
-
-
Select
output
source
to view
VCR)
on
(CD/DVD
the TV
To
or
screen.
(PS).
in
options
VCR
FM/AM
AV SELECT
a menu.
RDS
SHOWVIEW
a
DVD
camera
angle
if
MUTE
Program
image.
PROGRAM
CLEAR
AUDIO
SUBTITLE
TITLE
MARKER
Marks any
point during playback.
MARKER SEARCH
ANGLE
Selects
AV
b/B/v/V
Selects
-
an
in the
option
menu.
PR/TRK/PRESET(v/V):
Select programme of VCR or Tuner
Adjusts manually the tape's picture
SETUP/ i
PR/TRK/PRESET
TUN
VOLUME
TUN
-ING
RETURN
DISC MENU
PR/TRK/PRESET
STOP
PAUSE/STEP
PLAY
search
or removes
menu.
REPEAT
TV/VCR
-
SPEED
(x)
Displays functions on the TV screen.
Acknowledges menu selection.
menu on a
(z)
PLAY
Starts
(X/C)
(N)
playback.
BACKWARD
(.)
DVD: Search
backward*/go to beginning of current chapter or track or go to
previous chapter or track.
Repeat chapter, track, title,
ez (easy) repeat (see page 37.)
Repeats sequence.
Selects recording speed.
-
VCR: Rewinds the
-
or
TV/VCR
tuner
or
by
by
*
the VCR
the TV tuner.
ote
This remote control
To
use
To
use
8
for fast
use
the
same
buttons for VCR and DVD functions
(ex. PLAY).
reverse
tape in STOP mode
picture
FORWARD
(>)
DVD: Search
forward*/go
or
mode
*
or
to next
track.
VCR: Advances the
the
search.
Press and hold button for about two
seconds.
chapter
VCR, first press the VCR button.
the DVD, first press the CD/DVD button.
DVD disc.
playback or recording
temporarily/press repeatedly for
frame-by-frame playback.
all.
To view channels selected
into
frequency
Pause
REPEAT A-B/SPEED/REPEAT
-
radio stations
a
PAUSE/STEP
Recording.
-
Enter
Accesses
activates Instant
Timer
menu
DISC MENU
through 30
recording.
REC/ITR
or
setup
the tuner.
Stops playback.
normally
DVD
MEMORY/OK/ENTER
-
seconds of
Records
volume.
and VCR
menu.
STOP
source
AV3).
(+/-)
Accesses
REPEAT
A-B
or
SETUP/i
BACKWARD FORWARD
REC/ITR
AV2
Adjusts speaker
ENTER
-
picture
language.
the disc's Title menu, if
(Tuner, AV1,
OK
-ING
RETURN
Fast forwards
subtitle
Selects the VCR deck's
MEMORY
station.
CM SKIP
or an
AV
CLK/CNT
To tune in the desired radio
setup
a
Displays
DISPLAY
CM SKIP
Removes the
language (DVD)
(CD).
available.
(b/B):
TUNING
preset stations from the
audio
an
Selects
SEARCH
onscreen.
-
the
TITLE
VOLUME
display.
(left/right/up/down)
on
SUBTITLE
menu.
Switches among the clock, tape counter
and tape remaining modes on the display.
track number
Press to clear
tuner memory.
MARKER
Accesses On-Screen
a
audio channel
DISPLAY, CLK/CNT
-
Removes
AUDIO
ZOOM
SEARCH
Displays
BYPASS,
LOGIC, PRO LOGICII (MOVIE,
MUSIC, MATRIX) and 3D SURROUND.
program menu or a mark on the
MARKER SEARCH menu.
menu.
ZOOM
DVD video
Enlarges
SOUND MODE
CLEAR
SOUND MODE
PROGRAM
or removes
of the
PRO
available.
Accesses
speaker
DVD/CD/VCR receiver.
Selects sound mode between
ANGLE
Selects
silence the
Momentarily
CD/DVD
for
menu
System programming
MUTE
POWER
0-9 numerical buttons
Selects numbered
the programme
display
ShowView
EJECT
OPEN/CLOSE
RDS
To check the RDS service programme
source.
SHOWVIEW
CD/DVD/VCR select buttons
Select the
input
tape in STOP
for fast forward
picture
search.
Press and hold button for about two
seconds.
Rear Panel Connections
S-VIDEO OUT
Connect to
a
S-Video
EURO AV2
(DVD OUT)
Input on TV.
Connect to
Box
FOR DVD VIEWING ONLY.
or
(VCR IN+OUT/DVD OUT)
Pay-TV decoder, Set Top
another video recorder.
SPEAKER CONNECTORS
Connect the six
supplied speakers
PREATION
AC Power Cord
to
Plug
into the power
source.
these terminals.
FRONT
REAR
(R 4
(R4 )
)
CENTER
(4
)
REAR
FRONT
(L4
(L4
)
SUB
WOOFER
)
VCR IN+OUT/DVD OUT
(8)
EURO AV2
DECODER
AM
S-VIDEO OUT
GND
EURO AV1
AUDIO/
VIDEO
SPEAKERS
FM
AERIAL
RF.OUT
ANTENNA
DVD/VCR
OUT
EURO AV1 AUDIO/VIDEO
Connect to your TV set
or
(VCR
IN+OUT/DVD
OUT)
another video recorder.
RF. OUT
Connect to
a
TV with RF cable.
AERIAL
Connect the aerial
using
this
jack.
FM ANTENNA CONNECTOR
Connect the FM antenna to this terminal.
AM ANTENNA CONNECTORS
Connect the AM antenna to this terminal.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
the buttons.
Distance: About 6m
remote
Angle:
remote
AAA AAA
(20ft)
from the front of the
battery
installation
Detach the
battery
the remote
control, and insert
cover on
(size AAA) batteries
aligned correctly.
sensor
with
the
rear
of
two R03
and
About 30° in each direction of the front of the
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
9
Connections
TV &
Decoder(or Set Top Box) Connections
Decoder
(or
Set
Top Box)
D
A
FRONT
(R
4
)
REAR
(R4
)
CENTER
REAR
FRONT
(4 )
(L4 )
(L4
)
SUB
WOOFER
VHS
(8)
T
EURO AV2
DECODER
AM
S-VIDEO OUT
GND
EURO AV1
AUDIO/
VIDEO
SPEAKERS
FM
AERIAL
RF.OUT
ANTENNA
DVR
S
R
E
S
O
SCART INPUT
IT
Rear of TV
AERIAL
Make
the
one
of the
capabilities
ips
Depending
following connections, depending
existing equipment.
on
--
--
Caution
Make sure the DVD/CD/VCR receiver is connected
directly to the TV. Select the correct AV input on your
TV.
Do not connect your DVD/CD/VCR receiver to TV via
your VCR. The DVD image could be distorted by the
copy
door aerial to AERIAL
2
Connect the
supplied RF cable (R) from the
jack on the rear panel of DVD/CD/VCR
to your television's Aerial Input.
RF. OUT
receiver
S-Video connection
Connect the S-VIDEO OUT
receiver to the S-VIDEO IN
Video cable
jack on the DVD/CD/VCR
jack on the TV using the S-
(S).
otes
The
protection system.
(A) from your indoor/ outjack on the rear panel of
DVD/CD/VCR receiver.
on
connect, there
(RF)
Connect the aerial cable
1
your TV and other equipment you wish
are various ways you could connect
the DVD/CD/VCR receiver. Use one of the connections described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
to
Basic connections
of your
signal
of S-VIDEO OUT
jack
will
output only
when the function mode is selected to CD/DVD.
Basic connections
1
(AV)
Connect the EURO AV1 AUDIO/VIDEO
panel of the
input socket
on
the
rear
units from the wall outlet before
DVD/CD/VCR receiver to the scart
on
the TV
using
a
SCART lead
tions.
(E).
Some TV broadcasters transmit encoded television
2 signals
which you can only see with a purchased
rented decoder. You can connect such a decoder
(descrambler)
10
to the DVD/CD/VCR receiver
(D).
When you connect the DVD/CD/VCR receiver to your
TV, be sure to turn off the power and unplug both
or
making
any
connec-
Connections
Accessory
Connect the AV3
using
the
optional
(Continued)
Audio/Video
jacks
on
(A/V) Connections
to DVD/CD/VCR receiver
the DVD/CD/VCR receiver to the audio/video out
jacks
on
your accessory component,
audio/video cables.
PREATION
Radio Aerial Connections
Connect the
supplied FM/AM aerial for listening to the radio.
loop aerial to the AM aerial connector.
Connect the AM
Connect he FM wire aerial to the FM aerial connector.
FM Wire aerial
AM
(supplied)
FRONT
(R
4
)
aerial
Loop
REAR
(R4
)
CENTER
(4
)
(supplied)
REAR
FRONT
(L4
(L4
)
)
SUB
WOOFER
VCR IN+OUT/DVD OUT
(8)
AM
S-VIDEO OUT
EURO AV2
DECODER
GND
EURO AV1
AUDIO/
VIDEO
SPEAKERS
FM
AERIAL
RF.OUT
ANTENNA
DVD/VCR
OUT
otes
To
prevent noise pickup, keep the AM loop aerial away from the DVD/CD/VCR receiver and other components.
Be
sure
After
to fully extend the FM wire aerial.
connecting the FM wire aerial, keep it
as
horizontal
as
possible.
11
Connections
(Continued)
Speaker System Connection
Connect the
speakers using
To obtain the best
possible
the
supplied speaker
surround
Centre
cords.
sound, adjust the speaker parameters; distance, level,
etc..
Speaker
Front
Speaker
(Right)
Front
Speaker
(Left)
FRONT
(R 4 )
REAR
(R 4
CENTER
REAR
FRONT
(4 )
(L4 )
(L4
SUB
WOOFER
VCR IN+OUT/DVD OUT
(8)
AM
S-VIDEO OUT
EURO AV2
DECODER
GND
EURO AV1
AUDIO/
VIDEO
FM
SPEAKERS
AERIAL
RF.OUT
ANTENNA
DVD/VCR
OUT
Subwoofer
Rear Speaker
(Right Surround)
Rear Speaker
(Left Surround)
otes
Be
sure
to match the
speaker
cable to the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
If you use front speakers with low maximum input rating,
Do not remove the front cover of supplied speaker.
12
adjust
the volume
carefully
to avoid excessive
output
on
the
speakers.
Connections
(Continued)
Speaker Positioning
In the
of normal
case
position
the 6
use
speakers (2
front
speakers,
centre
speaker,
2
speakers
rear
and
subwoofer).
If you want to
the excellent bass
play
sound, DTS digital surround
or
Dolby Digital surround,
you should connect
a
subwoofer.
?
?
Front speakers
According to your listening position set up
interval between speakers to 45 degree.
the
speakers
for
equal
distance. And
by hearing position
set up the
Centre
The
speaker
centre speakers
and front
speakers
the
ideally
are
same
height.
But
normally place
it above
or
below the
television.
?
Rear
speakers
right behind
surround sound playback.
Place left and
and install them at
a
?
wall
or
ceiling
of
case
other,
and set the
listening
area.
These
speakers
do not install the
results,
above the level of the listener's
to further
In the
a
or
the
For best
smaller
rear
disperse
room
speakers
atmosphere required for
listening position
rear speakers towards
too far behind the
It is also effective to direct the
the sound.
size, if the audience is
speakers
ears.
recreate sound motion and
rear
above 60
-
90
cm
near
to the
rear
than the listener's
wall set the
rear
speakers opposite
each
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Rear
Speaker
(Left)
Speaker
Front Speaker
(Right)
Speaker
(Left)
Rear Speaker
(Right)
Speaker Positioning Example
13
PREATION
Mini
Mini
Glossary
for Audio Stream &
Glossary
BYPASS
Software with multichannel surround audio
Surround mode
according
You
and
of the
identical to the
original masters) and results in exceptional clarity throughout a true 360 degree sound field. The
term DTS is a trademark of DTS Technology, LLC.
Manufactured under license from DTS Technology, LLC.
means
was
signals
is
played
recorded.
Sound Mode
Allows you to enjoy 5.1(or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
compact discs, etc.bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio(which
to the way it
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
program you want to listen to.
Press SOUND MODE
repeatedly until the sound mode
display window as below.
you want appears in the
Each time you press SOUND MODE button, the sound
changed in the following order;
mode is
The
PRO LOGIC
channels of
Dolby Digital surround format lets you enjoy up to 5.1
digital surround sound from a Dolby Digital promark, you can
gram source. If you play DVDs with
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
3D SURROUND
"
→
PL2 MOVIE
playing
which carries the
movie
or
→
PL2 MATRIX
→
When DVD is inserted.
can change the
etc) by pressing the
"
PL2 MUSIC
"
You
Use this mode when
→
BYPASS
→
Dolby Digital
2 channel
"
mark. This mode provides the effect
being in a movie theatre or live concert house-an effect with
an intensity which can only be obtained through DOLBY PRO
LOGIC SURROUND. The effect of the front/back/left/right
movement of the sound image, as well as the sense of fixed
position in the sound image, is much clearer and more dynamof
stream of DVD
AUDIO button
(Dolby Digital, DTS, PCM,
the remote during play-
on
back.
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used.
Each time you press AUDIO button, the sound mode of DVD is
as the following order;
changed
→→→
ic than before.
For your reference
(II)
Dolby
Pro
Logic
?
II creates five full-bandwidth
from two-channel
sources.
output channels
This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds
or
tonal colorations.
The DVD/CD/VCR Receiver memorizes the last
mode
settings
?
for each source
individually.
identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled with
the
logo.
DTS Digital Surround discs are marked with DTS.
You
can
-
MOVIE mode:
-
The Movie mode is for
use
with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
-
5.1-channel sound.
MUSIC mode:
The Music mode is for
and
provides
a
with any stereo music recordings,
deep sound space. The Music mode
use
wide and
includes controls that allow the sound to be tailored to individual
listening
The Matrix mode is the
the Music mode except that the
logic is turned off. It may be used to
enhance mono signals by making them seem "larger." The
Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate
"cure" for poor FM stereo reception may be simply to force the
same as
directional enhancement
mono.
3D SURROUND
This unit
can produce a 3D Surround effect, using 3D Surround
technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five
or more speakers normally required to listen to multi-channel
Sound
audio from
a
encoded with
14
home theatre. This feature works with DVD discs
Dolby
cy, the
play
Pro
Logic
and
Dolby Digital
audio tracks.
sound tracks with 96kHz
output signals will be converted
frequency).
tastes.
MATRIX mode:
audio to
ote
When you
sampling frequen(sampling
to 48kHz
Before
Operation
-
VCR part
Video channel Set
Video channel
Using your
is the channel
(RF output channel)
on
which your TV receives picture and sound signals from
the DVD/CD/VCR receiver through the RF cable.
If you have used a SCART lead you will not have to tune
your TV, simply select the AV channel. The AV channel
is already pre-tuned for optimum video playback on
your TV.
Receiver for the very first time
For the following steps we assume that you have just
connected your Receiver for the very first time.
To make tuning TV stations an easy task your Receiver
incorporates the Automatic Channel Memory System
(ACMS).
This
system will automatically
TV channels in your Receiver.
While this is happening the clock
Receiver will be set
Perform the
following steps only if interference appears
picture after you have moved to a different
area or a new station has started broadcasting in your
area, or if you change the connection from RF connecin the TV
tion to AV
connection,
vise
or
1
versa.
(date
tune and store
&
time)
in the
automatically.
Make sure that you have
Receiver.
correctly
Press POWER to turn
your Receiver.
on
installed your
If the initial Menu Screen doesn't appear on screen,
sure that you have tuned your TV to a video
make
1
2
3
Turn
on
DVD/CD/VCR receiver and TV.
Set the vacant
position
Press POWER
on
36
on
channel. Or if this is correct it may
Receiver is already tuned.
your TV.
Press F
the
standby
dimmed).
the remote control to enter
mode
(the
DVD/CD/VCR
for
more
following picture
will be
displayed
country.
B:
4 secs.
RF 36 will appear in the DVD/CD/VCR receiver
The
to select the desired
that your
Belgium,CH: Switzerland, D:
Germany, DK: Denmark, E: Spain, F: France, I: Italy,
N: Norway, NL: Netherlands, P: Portugal, S:Sweden,
SF: Finland, ANDERE: Others.)
clock indicator will be
4PressandholdPROGDorEonthe
receiver
than
or G
2 (A: Austria,
mean
on
display.
the TV
ABC HDDKEFI
NNLPSSFANDERE
screen.
Pr-12
OKi
ACMS
3
RF
P
R
KANAL
Press OK to start the automatic
tuning process.
36
i
SET
01
C02
00
ARD
02
C03
00
ZDF
03
C04
00
WDR 3
If the
picture is snowy, move to step 5. If the picture
is clean, press POWER on the DVD/CD/VCR
receiver to finish.
S
E
Pr-12
i
ACMS
5
or E on
Press PROG D
er
the DVD/CD/VCR receiv-
to set the video channel to
a
between 22 and 68 which is not
any local station in your
Programme
vacant
position
occupied by
area.
ote
The RF channel will not
change
until
step
6 has been
executed.
6
Press POWER
store the
new
on
DVD/CD/VCR receiver memory.
Now tune your TV set to the
new
TV Station
ARD
ZDF
WDR 3
BR3
N3
SWE3
The TV station shown above may vary
the area you live in.
the DVD/CD/VCR receiver to
RF video channel into the
number
PR01
PR02
PR03
PR04
PR05
PR06
4
Press i to
remove
the
menus
according
to
from the TV
screen.
DVD+VCR RF
channel.
ote
If the TV
picture
was
clear in
step 4, do
not retune your
TV.
15
PREATION
Before
How to
Operation
the main
use
This DVD/CD/VCR receiver
the
by using
The
Tuning
menu
easily
can
displayed
menus
VCR part
-
be
programmed
on screen.
controlled from the Remote Control
menus are
Handset.
ver
Should you wish to
perform the Automatic Channel
Memory System (ACMS) again please follow the guidance given on this page. You may tune up to 88 TV
your TV set and DVD/CD/VCR receithe POWER.
on
by pressing
The main
will appear
menu
the TV
on
screen.
receiver.
2
The main
menu
Press F
or
3
12
REC
PSET
R
fOSD
ON
OFF
Pr-12
ACMS
+
16:9
4:3
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
DECODER
on
your DVD/CD/VCR
Press i.
will appear
the TV
on
screen.
G to select ACMS and press OK.
REC
NIC
-
Press POWER to turn
1
Press i.
2
Automatically
stations into your DVD/CD/VCR receiver.
Switch
1
in TV Stations
OKi
OPR
ABC HDDKEFI
NNLPSSFOTHERS
REC
Pr-12
recording setting (see
p.
27-28).
Press F
Manual
tuning setting (see
p.
17).
(Automatic
right column).
Channel
Memory System) (see
TIME DATE
Press OK
Date & clock
setting (see
p.
5 process.
19).
SYSTEM
To set the Colour TV
System (see
p.
To
the
change
again
19).
To check
a
problem
00
ARD
C03
00
ZDF
03
C04
00
WDR 3
S
6
p. 37).
fOSD ON/OFF
display
the
operational mode of
(see p. 37).
your
DVD/CD/VCR receiver
E
i
To select the
While automatic
tuning is taking place the time and
:
automatically. If
appears in the
DVD/CD/VCR receiver display it means that the
broadcast signal is weak and the clock was not set.
date will set
-
-
-
-
Please turn to CLOCK SET section of this book
16:9/4:3
O
C02
02
tuning
Pr-12
with your DVD/CD/VCR receiver
(see
To
01
ACMS
Dr.
O
to start the automatic
for OSD.
language setting
You can select the language from English, German,
French, Italian, Spanish, Dutch and Portuguese.
O
country.
B:
ABC OSD
O
to select the desired
Belgium,CH: Switzerland, D:
Germany, DK: Denmark, E: Spain, F: France, I:
Italy, N: Norway, NL: Netherlands, P: Portugal, S:
Sweden, SF: Finland, Others.)
ACMS
ACMS
or G
4 (A: Austria,
PRSET
O
OKi
ACMS
Timer
page 19.
aspect ratio of your TV (see p. 38).
DECODER
O
To
use a
receiver
pay-TV decoder
(see p. 38).
with your DVD/CD/VCR
OPR
O
To
improve
the
playback picture (see
p.
24).
p.
or
deactivate the NICAM
digital
ARD
00
ZDF
C04
00
WDR 3
04
C05
00
BR3
05
C06
00
N3
06
C07
00
SWF3
07
C08
00
MDR 3
08
C09
00
RTL
7
Press 1
4
Press OK and press
5
Press i to return to
or 2
to select the desired menu.
a
3 or 4
TV
to select.
picture.
UMSTELLEN:
LOSCHEN:
,
OKi
sound
38).
3
16
00
C03
03
RSET
To activate
(see
C02
02
P
NIC
O
01
Press i to
screen.
remove
the
menus
from the TV
on
Before
Tuning
Operation
VCR part
-
in TV Stations
Manually
5
Searching
In certain areas of the country broadcast signals may
be too weak for your DVD/CD/VCR receiver's automatic
tuning process to find or assign TV stations correctly.
be added
You must tune in these weaker broadcast stations
or
ually
will
stop when it locates a station.
VPS, the station name will
If the station transmits
automatically.
Control the fine
man-
of the station
tuning
by pressing
D
E.
PREATION
in order for your DVD/CD/VCR receiver to store
them.
1
2
PR
KANAL
FEIN
07
C02
+04
SENDER
Press i.
The main
Press F
menu
or G
will appear
on
the TV
screen.
KANAL/S-KANAL
AV
RSET
i
to select PR SET and press OK.
6
Press G to select STATION and
The TV station
Press D
PR
01
:
P
CH
MFT
STATION
C02
00
ARD
CHANNEL/CABLE
to select
a
station
name
from the
list and press OK to select it.
If your station name isn't on the list do not press
OK, but go to stage 7.
AV
:
P
SET
R
or E
press OK.
list will appear.
name
i
ARD
ZDF
3
Press i and press D or E to select the programme number that you want to tune (for
example,
PR
07).
WDR 3
BR3
PR
07
KANAL
FEIN
C02
HR3
N3
+04
Press OK.
NDR3
SWF3
P
RSET
01
C02
00
ARD
02
C03
00
ZDF
03
C04
00
WDR 3
04
C05
00
BR3
05
C06
00
N3
06
S07
00
SWF3
07
08
--
--
-----
--
--
-----
7
LOSCHEN:
RSET
OKi
,
change a TV
using the
can
rather than
station
name
"standard"
manually
names.
Press G and press D or E to select letters and
numbers for the new station name.
UMSTELLEN:
P
You
OK i
Press F
or G
to move back and forth between
characters. Press OK.
PR
KANAL
07
C--
FEIN
SENDER
--
-----
KANAL/S-KANAL
:
AV
P
RSET
4
i
INPUT(AV) to select C (Standard stations)
(Cable stations): C02 C70, S01 S41.
PR
KANAL
FEIN
07
C02
+04
SENDER
TV2
Press
or
S
-
-
P
RSET
Enter the channel number of station that you want
to tune with the numerical buttons.
8
PR
KANAL
07
C02
FEIN
P
RSET
Press i, confirm the station
SENDER
00
KANAL/S-KANAL
:
OK i
AV
placement.
01
C02
00
ARD
02
C03
00
ZDF
03
C04
00
WDR 3
04
C05
00
BR3
05
C06
00
N3
06
S07
00
SWF3
07
C02
+04
08
--
--
TV2
-----
i
UMSTELLEN:
P
RSET
9
Press i to
remove
LOSCHEN:
the
OKi
,
menus
from the TV
screen.
Your
new
TV station has
now
been tuned into your
DVD/CD/VCR receiver.
If you wish to
8.
stages 1
manually
tune other stations
repeat
-
17
Before
Operation
-
VCR part
the order of TV Stations
Changing
After
tuning TV stations into your DVD/CD/VCR receiver
you may wish to change the order in which they are
stored without having to retune them. The instructions
given
move
1
this page will show you how you
them into your desired order
on
can
simply
Press F
After
tuning TV stations into your DVD/CD/VCR receiver
you may wish to delete a station.
The instructions given on this page will show you how
to easily delete any unwanted TV stations.
1
Press i.
The main
TV Stations
Deleting
will appear on the TV screen.
G to select PR SET and press OK.
Press i.
The main
menu
will appear
on
the TV
or
Press F
or G
to select PR SET and press OK.
PR
01
PR
01
KANAL
C02
FEIN
SENDER
00
ARD
KANAL
C02
FEIN
SENDER
00
ARD
KANAL/S-KANAL
P
RSET
KANAL/S-KANAL
:
P
RSET
2
to select the programme number
you want to move (for example, PR 03).
Press G.
2
Press D
or E
to select the programme number
(for example, PR 03).
you want to delete
C02
00
02
C03
00
ZDF
01
C02
00
ARD
03
C03
00
ZDF
04
C05
C06
00
02
00
WDR 3
BR3
03
C04
00
WDR 3
04
C05
C06
00
C04
C07
00
00
N3
SWF3
00
BR3
N3
05
06
05
07
C08
00
MDR 3
06
C07
00
SWF3
08
C09
00
07
C08
00
MDR 3
C09
00
RTL
RSET
RSET
Press D
or E
ARD
RTL
MOVE:
P
P
you want to
i
Press i.
01
3
AV
i
or E
08
:
AV
Press i.
Press D
screen.
menu
DELETE
:
OKi
,
OKi
to select the programme number
to (for example, PR 05).
move
3
Press F.
After
a
short
while, the selected station will be
deleted.
01
C02
00
ARD
02
C03
00
03
C05
C06
00
C02
00
ARD
00
ZDF
BR3
N3
01
04
02
00
WDR 3
03
C03
C06
00
05
C04
00
ZDF
BR3
06
C07
00
SWF3
04
07
C08
00
MDR 3
05
C04
C07
00
00
N3
SWF3
08
C09
00
RTL
06
C08
00
07
C09
00
--
MDR 3
RTL
-----
OKi
RSET
UMSTELLEN:
P
RSET
4
--
08
P
Press OK.
4
The selected programme will be moved to the
Press i to
remove
LOSCHEN:
the
,
menus
OKi
from the TV
screen.
new
If you wish to delete other TV stations
stages 1 3.
programme number.
repeat
-
01
C02
00
ARD
02
C03
00
ZDF
03
00
04
C05
C06
00
BR3
N3
05
C04
00
WDR 3
06
C07
00
SWF3
07
C08
00
MDR 3
08
C09
00
RTL
How to select Stored TV stations:
Stored TV stations
Press D
UMSTELLEN:
P
RSET
LOSCHEN:
,
can
be selected in either of two
ways.
OKi
or
E to select different stations that
are
tuned into your DVD/CD/VCR receiver.
5
Press i to
remove
menus
from the TV
screen.
If you wish to
1-4.
18
the
move
other TV stations
repeat stages
You may also directly select stations using the
numerical buttons on the remote control.
Before
Setting
Operation
the Clock
VCR part
-
To set the colour
Manually
system
The clock in your DVD/CD/VCR receiver controls time,
day and date settings for your DVD/CD/VCR receiver.
Your DVD/CD/VCR receiver is
For ShowView
MESECAM.
to work
system
correctly
the correct
time and date must be set. The clock is set automati-
cally during ACMS (Automatic Channel Memory
System) when your DVD/CD/VCR receiver detects
channel that broadcasts a Teletext signal.
If the broadcast signal is weak the clock will not be
and will require setting manually.
1
or G
a
set
to select TIME DATE and press
adjust
pressing D
mode
be set to "OFF"
can
E if you
or
can
play
equipped
back
a
with dual
tape in PAL and
During playback your DVD/CD/VCR receiver detects the
system automatically.
If there is any colour problem please select the colour
system manually.
1
OK.
The auto
standard, you
colour
Press i.
Press F
colour
2
Press i.
The main
Press F
will appear
menu
or G
the TV
on
screen.
to select the SYSTEM.
by
want to set the time
man-
ually.
12
REC
P
SET
R
fOSD
ON
OFF
AUTO
-
EINST.
3
12
TIME
DATE
OK i
DECODER
AB
C
OSD
VCR
Dr.
SYSTEM
NIC
OKi
OPR
Press OK and press D
to the COLOUR
or E
to select
according
system used.
AUTO:
Press OK.
press / or F/G
the remote control to alter the HOURS, MIN-
Use the numerical buttons
on
16:9
4:3
SYSTEM
TIME
DATE
-
EIN
:
--
2
Pr-12
ACMS
+
or
UTES, DAY, MONTH and YEAR.
Allows PAL
Use when
back
The
Use when
of the week will appear
you enter the year.
automatically
when
MESECAM
signals
to be
distinguished
PAL:
Please note your DVD/CD/VCR receiver uses a 24hour clock. e.g. 1pm will be displayed as 13:00.
day
or
automatically.
a
receiving
PAL
signals
or use
when
playing
tape recorded in PAL system.
MESECAM:
playing
receiving
back
a
tape
MESECAM
signals
or use
recorded in MESECAM
when
system.
HHMMTTMMJJ
--
:.
-
-
--
--
--
---
.
12
REC
TIME
DATE
i
fOS
ON
OFF
3
If you make a mistake, press F
the correct details.
or G
AUTO
PAL
SECAM
MESECAM
VCR
SYSTEM
Dr.
NIC
SYSTEM
OKi
OPR
4:3
and enter
4
Press F
or G
to select the RF AUDIO and press
according to the RF AUDIO
D or E to select
used.
HHMMTTMMJJ
11
:.
4510103MI
.
12
TIME
DATE
i
REC
fOSD
4
Press i to
remove
the
menus
from the TV
ON
OFF
VCR
RF I/I
RF B/G
RF D/K
16:9
4:3
DECODER
SYSTEM
Dr.
NIC
SYSTEM
OKi
OPR
screen.
Your
on
stored and will appear
your DVD/CD/VCR receiver's Display.
new
clock
settings
are
5
Press i to
remove
the
menus
from the TV
screen.
19
PREATION
Before
General
This manual
Operation
-
DVD
part
Explanation
operating the
DVD/CD/VCR receiver. Some DVDs require specific
operation or allow only limited operation during playback. When this occurs, the symbol
appears on the
TV screen, indicating that the operation is not permitted
by the DVD/CD/VCR receiver or is not available on the
gives
numbers
General
screen.
playback
Temporary
Some items
On-screen
1
2
can
be
be
Repeat Chapter
Repeat
Track
Repeat
All Tracks
Repeat
A-B
Repeat
Off
AB
OFF
Press 3/4 to select
an
an
item.
For
some
setting
functions,
setting.
Title
TRACK
Resume
Action
during playback.
The selected item will be
number).
CHAPT
display operation
Press DISPLAY
title
of
setting
be also be used for
Feedback Field Icons
Repeat
TITLE
ALL
displayed on the TV
changed on the menu.
can
(e.g.,
can
press ENTER to execute the
Display
status
the
change
The number buttons
basic instructions for
disc.
On-Screen
Press 1/2 to
3
play
(non-PBC
Video CDs
(non-PBC
from this
prohibited
or
only)
Video CDs
only)
point
not available
otes
item.
Some discs may not
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
highlighted.
on-screen
DVD
Items
Title Number
1/3
Chapter
Number
1 /12
Time search
0:20:09
Audio
1 ENG
language
Digital Audio
Output mode
and
Subtitle
language
Angle
Sound
VCD2.0
D
5.1 CH
ABC
Shows the current
chapters, and skips
chapter number and total number
to the desired chapter number.
Shows the elapsed playing time, and
searches the point directly from the elapsed time.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
Shows the current subtitles
changes the setting.
1/1
Shows the current angle number and total number of
angles, and changes the angle number.
BYPASS
1/2,or
Numbers, ENTER
Shows the current sound
changes the setting.
language, and
mode,
of
1/2,or
Numbers, ENTER
Numbers, ENTER
1/2,or
AUDIO
1/2,or
SUBTITLE
and
1/2,or
ANGLE
1/2,or
SOUND MODE
VCD1.1
Function (Press 3/4 to select desired item)
Track Number
1/4
Time
0:20:09
Audio Channel
STER.
20
Shows the current title number and total number of
to the desired title number.
titles, and skips
OFF
Items
Sound
Selection Method
Function (Press 3/4 to select desired item)
BYPASS
Shows the current track number, total number of tracks
and PBC On mode, and skips to the desired track number.
Shows the
elapsed playing time (Display only)
Shows the audio channel, and
changes the audio channel.
Shows the current sound
changes the setting.
mode, and
Selection Method
1/2,or
Numbers, ENTER
--
1/2,or
AUDIO
1/2,or
SOUND MODE
Before
Initial
Operation
-
DVD
part (Continued)
Language
Settings
You
can set your own Personal Preferences
DVD/CD/VCR receiver.
on
the
Disc
Language
Select
DVD
for the disc's
language
a
Menu, Audio, and
Subtitle.
General
1
Operation
original language set for the disc is selected.
language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 42. If you enter the wrong language
Original
Other
Press SETUP.
The
setup
menu
appears.
:
:
The
To select another
code, press CLEAR.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Disc Audio
Original
Rating
German
Disc Subtitle
English
Spanish
Disc Menu
French
Italian
Rating
German
Country
TV
Code
Aspect
Menu
5.1
Language
Chinese
Country
Polish
TV
Hungarian
Menu
Spanish
Code
Italian
Aspect
Chinese
Language
Other------------
Speaker Setup
Polish
Hungarian
Others
5.1
Other------------
Speaker Setup
Others
2
Press 3/4 to select the desired item.
The
screen
selected
will show the current
item,
as
well
as
setting for the
setting(s).
alternate
Menu
Select
3
4
While the desired item is
selected, press 2, then
3/4 to select the desired
setting.
you
Language
a
see
Press ENTER to confirm your selection.
require additional steps.
Some items
5 setup
or
setup
menu.
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
Country
TV
Press SETUP, RETURN,
for the
language
This is the
menu
when you press SETUP.
PLAY to exit the
Italian
Code
Aspect
Menu
Portugues
Language
menu.
5.1
Speaker Setup
Others
Picture
TV
Aspect
DVD
4:3 Letterbox: Select when
nected.
Displays
a
standard 4:3 TV is
theatrical
above and below the
images
picture.
4:3 Panscan: Select when
a
with
masking
con-
bars
conventional TV set is
connected. The video material formatted in the Pan &
Scan
style
picture are
is
played
off).
back in that
style (Both
sides of the
cut
16:9 Wide: Select when
a
16:9 wide TV is connected.
Disc Audio
4:3
Letterbox
Disc Subtitle
4:3
Panscan
Disc Menu
16:9 Wide
Rating
Country
TV
Menu
5.1
Code
Aspect
Language
Speaker Setup
Others
21
PREATION
Before
Operation
-
DVD
part (Continued)
Speaker setup
5.1
Auto
Speaker settings
DVD
Select
speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Setup", page 36.)
Play
DVD
You
can
disc
automatically
set up the DVD/CD/VCR receiver so a DVD
starts playing whenever the DVD is
inserted.
If Auto
Play
mode is set to
receiver will search
and then
On: Auto
Off: Auto
play
Play
Play
a
On, this DVD/CD/VCR
title that
back the title
playback time
automatically.
is
longest
function is activated.
function is not activated.
Disc Audio
Disc Subtitle
R
Disc Menu
Country
TV
ote
Code
Volume
Small
Distance
Language
The Auto
0 dB
Size
Aspect
Menu
R
Front L
Rating
1 ft
Test
Return
5.1
Speaker Setup
Others
Others
The
DRC, Vocal, PBC and Auto Play settings
can
be
changed.
Press 3/4 to select the desired item and press
ENTER. The setting of the selected item is changed
between On and Off.
Disc Audio
DRC
On
Disc Subtitle
Vocal
On
Disc Menu
PBC
Rating
Auto
Country
TV
Off
Code
Aspect
Menu
5.1
On
Play
Language
Speaker Setup
Others
Dynamic Range Control (DRC)
With the DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
possible,
thanks to
audio
digital
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
at
quietest ones). Then, you may
losing clarity
lower volume without
a
listen to
a
movie
of sound. Set
DRC to On for this effect.
Vocal
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
multi-channel karaoke
a
on
the disc will
mix into normal stereo sound.
PBC
Set
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
CDs.
22
to On
or
Off.
played according to the PBC.
played the same way as Audio
Play
function may not work for
some
DVDs.
Before
Operation
DVD
-
part (Continued)
Parental Control
Rating
Movies
DVDs may contain
on
scenes
not suitable for
Therefore, discs may contain Parental Control
information that
certain
DVD
Enter the code of
DVD
children.
Code
Country
to the
applies
complete
the disc. These
scenes on
disc
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
are
TV
6
5
Rating
1
4
Code
3
Aspect
Speaker Setup
Unlock
Speaker Setup
Select
Others
using
Country
2
step
3
4
5
6 selection,
1
2
While
3
When you have not entered a password.
Enter a 4-digit password using the number buttons
"Rating"
on
the
Setup
menu
using
the
3/4 buttons.
"Rating"
3 of
to create
a
Shift the
is selected, press 2.
"Rating"
personal 4-digit security password. then
4-digit password again and
tons to confirm the
Changing
pass-
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
4
rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Ratings
played. Higher
unless
an
rated
alternative
scenes
scene
will not be
is available
The alternative must have the
the
1
Follow
Enter the old
3
Select
Steps
4-digit
1-2
as
is necessary when
the 4-digit code"
code
shown above to the left
(Rating).
code, then press ENTER.
Change using
3/4 buttons then press
ENTER.
4
5
Enter the
ENTER.
Enter
new 4-digit code, then press
exactly the same code a second
fy by pressing ENTER.
time and veri-
6
Press SETUP to exit the
menu.
same
on
rating
played
If you
If you
forget your 4-digit
forget
your
password,
code
to clear the current pass-
the disc.
word, follow the procedure below.(in the NO DISC
or a
mode.)
suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
1
Press SETUP to
2
Use the Number buttons to enter the
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
3
lower
5
button and select the
1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be
the 3/4 buttons.
3/4 buttons.
4-digit password
changed (see "Changing
2
a
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
using
ote
below.).
personal 4-digit security
left.
Confirmation of the
the code is
word, then press ENTER.
on
Press ENTER to confirm your country code
then press SETUP to exit the menu.
When you have already registered a password;
Enter a 4-digit password using the numbered but-
Select
using 2
using
cursor
second character
press ENTER. Enter the
press ENTER to verify.
on
Code is selected, press 2.
Select the first character
Select
the 3/4 buttons
menu.
Follow
Change
Code
Country
the setup
While
2
Language
1
5.1
Language
Others
Disc Menu
Menu
Code
Aspect
Menu
5.1
7
TV
DE
Rating
Country
8
Disc Subtitle
Country
PREATION
Code Set
Disc Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
were
to the list
List", page 43).
Disc Subtitle
The Parental Control feature allows
country-dependent.
disc, referring
Disc Audio
rated
whose standards
country/area
Code
(See "Country
to
or
scenes are
a
used to rate the DVD video
one.
If
no
display
the
setup
menu.
6-digit
number
"210499".
The
4-digit password
Enter
a new
code
is cleared.
as
shown above to the left
(Rating).
ote
This function may not work for
some
DVDs.
23
Operation
Playing
You will
tape
tape
a
only
with
be able to load and
eject video cassettes
plugged into the
5
when your DVD/CD/VCR receiver is
mains.
play
back record-
a
When
cassette is inserted and
picture
playback started, the
tracking function works to get the best possible picture automatically. If the quality of the recording is
poor, repeatedly press either PR/TRK (v/V) on the
remote control or PROG/TUNING (v/V) on the front
panel to manually adjust the tracking until any distor-
tions have been removed. Press numbered button 0
the remote control to switch automatic
tracking
back
the
shuttle, the noise bars may
picture according
to the status of
If distortions
be
can
Press STOP
6
(v/V)
to end
(x)
in the
seen
on
picture,
playback.
Press EJECT.
If the end of the
tape is reached, your DVD/CD/
stop playback automatically,
the top of the tape, eject the tape
VCR receiver will
on
Make sure that you have correctly connected
your DVD/CD/VCR receiver as described earlier
rewind, stop
at
on
your TV.
Press POWER to turn
on
your DVD/CD/VCR
Insert the video cassette into your DVD/CD/VCR
receiver.
The video cassette should have the window side
facing
up and the
Press PLAY
CM
(Commercial Message) Skip:
When
receiver.
arrow
to start
(H)
away from you.
facing
playing your tape.
playing back tapes, this feature lets you skip
through commercial breaks by fast-forwarding, and
then resume normal playback.
While tape is playing press CM SKIP on the remote
control to skip commercial (or other programme
material).
Repeatedly press CM SKIP to skip:
The tape will fast forward picture search through 30
seconds of recording for each press of the button.
If you load a video cassette which has had its
record protection tab removed, playback of the
1 Press
30 seconds
2 Presses
60 seconds
cassette will start
3 Presses
90 seconds
4 Presses
120 seconds
5 Presses
150 seconds
6 Presses
180 seconds
automatically.
AUTO TRACKING
Your DVD/CD/VCR receiver will
adjust
the
to
tracking
Press PAUSE/STEP
give
(X)
the
automatically
best picture quality.
to still
a
picture.
Press PAUSE/STEP (X) repeatedly to advance
the tape frame by frame.
If you press FORWARD, the picture will be slowed
down at about 1/19 times the normal playback.
can be paused for up to 5 minutes. After 5
minutes your receiver will stop the tape to prevent
from damage to the tape or your receiver.
Tapes
Still
picture quality can be improved slightly by
pressing PR/TRK (v/V) on the remote control.
Press PLAY
(H)
to continue
OPR
(Optimum
condition of the
the
F or G to select OPR and
playback)
or
seeing
where you
tape.
OFF
SOFT
SHARP
fO
ON
OFF
3
Press D
or
or E
16:9
4:3
DECODER
12
TIME
DATE
SYSTEM
AB
C
OSD
or
rewind press and hold FORpicture will be played
a
BACKWARD. The
playback speed.
4
VCR
Dr.
OPR
NIC
i
OPR
repeatedly
to select:
OFF, SOFT
SHARP.
Please note you may set OPR
back at 7 times normal
24
while
press OK.
playing your tape.
RE
Logic search:
During fast forward
WARD
tape.
Press i.
1
Press
2
press either FORWARD or BACKWARD. This will enable you to rapidly wind the tape
times normal
Response):
automatically improves playback picture
quality by adjusting your DVD/CD/VCR receiver to the
During playback
are on
Picture
This feature
Picture search:
(7
reduce
the remote control.
then power off.
Turn
4
on
them with PR/TRK
on
in this book.
3
shuttle, press the
tape.
again.
2
slow motion and
During
automatic
1
or
reach the
desired function.
appear
Getting
a
can
To switch off the slow motion and
Your DVD/CD/VCR receiver may also
ings from NTSC tapes (on PAL TV).
better
still picture press F or G.
following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
During playback
You
only
when
playing
tape.
Press i to
screen.
remove
the
menus
from the TV
back
Operation
with
tape
The DVD/CD/VCR receiver allows you to make recordings using a variety of simple methods:
Instant Timer
diately
runs
for
Recording (ITR):
period of time or
set
a
Starts
recording
6
Press REC/ITR
imme-
until the video cassette
(z)
to start
recording.
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
out.
ShowView
System Recording greatly simplifies entering the date, channel, start and end times of a Timer
Recording.
Timer Recording: You may record at a later time (up to
1 month from the present). Up to 7 of these
automatic recordings may be set.
The DVD/CD/VCR receiver
incorporates Long Play (LP)
which enables you to record up to twice the amount of
time on a video cassette. For example an E-180 will
record up to 180 minutes using Standard Play (SP);
using LP you will be able to record up to 360 minutes.
Please note there will be
sound
quality
when
using
a
slight
loss in
picture
and
LP.
7
Press PAUSE/STEP
unwanted
Press PAUSE/STEP
to avoid
(X)
to continue
recording
recording.
If you press PAUSE/STEP (X) during ITR, the
DVD/CD/VCR receiver will enter the record pause
mode and ITR is cancelled.
Tapes
will be
be paused for up to 5 minutes; RECP
displayed when a tape is paused. After 5
can
minutes your DVD/CD/VCR receiver will stop
recording to prevent damaging the tape or your
DVD/CD/VCR receiver.
Press STOP
8 recording.
(x)
twice within 5 seconds to end
Press EJECT
EJECT will appear
seconds.
Instant Timer
(X)
scenes.
on
(Z).
the TV
screen
for
a
few
Recording (ITR)
otes
1
Make sure that you have correctly connected
your DVD/CD/VCR receiver as described earlier
in this book.
Press POWER to turn
on
your DVD/CD/VCR
Insert
protection
tab into
your DVD/CD/VCR receiver.
The video cassette should have the window side
up and the
facing
3
on a tape (this can hapby accident!) remove the protection
edge of the video cassette.
possible to record on a video cassette
protection tab removed by covering
record
video cassette with
a
pen quite easily
tab on the back
It is
receiver.
2
If you do not wish to record
arrow
facing
with self adhesive
with the
the hole
tape.
Remember you can record one programme while
watching another by starting your instant recording,
pressing TV/VCR to appear TV indicator in the
display window and then selecting a different channel
away from you.
Press PR/TRK
(v/V) to select the programme
number you wish to record.
You may also directly select programme numbers
using the numerical buttons on the remote con-
on
your TV.
trol.
4
If you wish to record directly from either of the
SCART sockets or AV3 sockets, repeatedly
press AV until the socket you wish to record
from is
AV 1
displayed.
for
recording
from EURO AV1 socket
of your DVD/CD/VCR receiver.
AV 2 for recording from EURO AV2 socket
on
the
on
the
rear
of your DVD/CD/VCR receiver.
AV 3 for recording from AV3 sockets on the front of
rear
your DVD/CD/VCR receiver.
5
Press SPEED if you wish to record in
Standard Play.
Long Play
or
SP will
produce improved picture
provide twice as
however LP will
time
as
and sound
much
quality,
recording
SP.
25
OPERATION
with
Operation
ShowView
tape
System recording
PR
ShowView
System greatly simplifies entering the date,
channel, start and end times of a Timer recording by
simply entering a ShowView programming number. The
ShowView programming number is published in most
TV guide magazines; they can vary from one to nine
numbers in length.
10 ::
111155
SP
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
::
--
--
-~
::
--
--
-~
::
--
-~
::
--
-~
::
--
--
-~
--
SP
--
SP
--
SP
--
SP
--
SP
--
If you want to record from either of the SCART
sockets or AV on the front, repeatedly press AV for
display (AV1,
AV2
or
AV3).
Make sure that TV channels have been tuned
6PressG andpressDorEtoswitchVPSon
and stored.
Insert
a
video cassette with
protection
tab into
If you are recording from stations that do not broadcast
*
VPS switch VPS off! ( symbol will disappear on the TV
The video cassette should have the window side
facing
up and the
arrow
facing
or
off.
your DVD/CD/VCR.
2
TIME
12
--
i
the correct
1
DATE
ARD
screen).
away from you.
Remember
only
certain stations transmit VPS.
Press SHOWVIEW.
PR
DATE
TIME
12
10 ::
111155
ARD
--
--
--
--
--
--
--
--
--
--
--
--
VPS/PDC
~
::
--
--
--
-~
::
--
--
-~
::
--
--
-~
::
--
--
-~
::
--
:
-~
::
--
--
-~
*
SP
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
EIN
i
---------
REC
Press D
or E
EINMAL
SHOWVIEW
0~9,
7
to select the
3 ONCE: To record
OKi
recording type.
LP.
once.
WEEKLY: To record at the
SP will
time every week.
(except Saturday and
same
DAILY: To record every day
at the same time.
Press G to select the recording speed and
pressDorEifyouwishtorecordinSP,IPor
produce improved picture and sound quality,
provide twice as much recording time
however LP will
as
SP.
Sunday)
8
Check that the timer event details
Press i to
save
your
PR
REC
4
DATE
TIME
12
10 ::
111155
SP
::
SP
ARD
---------
EINMAL
SHOWVIEW
0~9,
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
OKi
correct.
are
settings.
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
SP
--
SP
--
SP
--
SP
--
SP
--
Press the numerical buttons to enter the
i
ShowView
programming
number of the TV
programme that you wish to record.
If you make a mistake press F then enter the revised
If PLEASE CHECK is
displayed,
you have entered incor-
rect information and will need to re-enter the data.
number.
9
Press i to
remove
the
menus.
If you want to make other ShowView
recordings repeat stages 2 8.
system
-
10
123456789
REC
5
EINMAL
SHOWVIEW
OKi
0~9,
recording
displayed.
displayed
it
means
incorrectly
Intelligent
or
programming number has been printed
guide. If "- -" is displayed, you have
in the TV
to enter the programme number of the station you want to
record from.
26
mode,
even
with the
programme.
that you have
entered the wrong ShowView programming number,
entered the ShowView programming number incorrectly
Standby.
DVD/CD/VCR is power on, it will record any timer
details of your programme will be
If PLEASE CHECK is
the ShowView
to switch your unit
will appear in the DVD/CD/VCR's display while
your DVD/CD/VCR waits to make the recording.
If the DVD/CD/VCR is DVD
Press OK.
The
Press
LP
Recording
When you set the tape speed to "IP", the DVD/CD/VCR
automatically switches to LP mode to allow complete
recording if there is not enough tape to record the entire
programme while timer- recording in SP mode.
It is not possible to set the tape
"VPS/PDC" set to "ON".
speed
to "IP" with
with
Operation
Timer
tape
Press the numerical buttons to enter the date of
recording using On Screen
5 the programme.
Display
If you choose not to
Recording,
you
can
If you press OK before entering the date you may
select one of the following automated
recording features. Press F or G to select, then
press OK to confirm.
ShowView
use
set timer
System
recordings manually.
You may set up to seven timer record events within
month of the current date.
PLEASE NOTE! before
the timer make
setting
one
DLY To record every day (except Saturday and
the same time.
record at the same time every week.
Sunday) at
Weekly To
sure
that you have set the DVD/CD/VCR receiver clock
correctly and you know which channels on your
PR
In
a
stage 4, if you
SCART sockets
1
Insert
AV3
the
on
video cassette with
protection
tab into
up and the
arrow
or G
--
--
--
--
--
--
--
--
--
--
--
--
--
--
and
replace.
DATE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
LOSCHEN:
3
SP
--
SP
--
SP
--
SP
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
nel
the timer record event.
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
-
9,
press 0
by pressing
AV2
or
3
ARD
-~
-~
-~
SP
--
SP
--
SP
SA
OK i
--
TIME
12
1011
::
1155
SP
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
SP
--
SP
--
SP
--
SP
--
SP
--
Remember
first,
or
only
certain stations transmit VPS.
and
IP
(Intelligent
LP
recording)
on
page 26.
Check that the timer event details are correct.
Press i to save your settings.
If PLEASE CHECK is displayed, you have entered
data incorrectly and will need to re-enter the data.
ARD
then the chan-
DATE
TIME
16
19 ::
002000
SP
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
03. You may also
-
i
.
AV3).
or
10
Press i to remove the menus.
If you want to make other timer
stages 2 9.
recordings repeat
-
Once selected press G.
PR
--
SP
DATE
to record.
display (AV1,
--
::
SP
--
recording speed
8 pressDorEifyouwishtorecordinIPorLP.
9
SP
--
If you want to record from either of the SCART sockets
AV INPUT on the front, repeatedly press AV for the
correct
--
::
SP
--
Press G to select the
SP
--
number; for example Stations
select Channels
-~
::
--
PR
selecting
--
--
PR
Press the numerical buttons to enter the station
stations 1
::
SP
--
If you are recording from stations that do not broadcast
*
VPS switch VPS off! (
symbol will disappear on the TV
OK i
i
When
-~
7PressGandpressDorEtoswitchVPSonor
off.
SP
--
TIME
--
--
4 that you wish
-~
i
,
setting
DATE
--
-~
SP
--
?
PR
--
SP
--
screen).
Press OK to start
--
::
TIME
--
--
--
::
ARD
Press F to delete the event.
PR
::
Please note your DVD/CD/VCR receiver uses a 24hour clock. e.g. 1pm will be displayed as 13:00.
You may also select the start and end times by
or .
pressing
to select REC and press OK.
are full press D or E to
remove
--
you wish to record.
If all timer record events
select the event that you wish to
--
Press the numerical buttons to enter the recordstart and end times of the programme that
Press i.
Press F
--
--
6 ing
away from you.
facing
TIME
12
--
TGLSOMODIMIDOFR
front, press INPUT(AV).
your DVD/CD/VCR receiver.
The video cassette should have the window side
facing
2
a
want to record from either of the
or
DATE
ARD
DVD/CD/VCR receiver you have tuned to TV
stations.
Press POWER to switch your DVD/CD/VCR
11 receiver
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
i
to
Standby.
will appear in the DVD/CD/VCR receiver's display while your DVD/CD/VCR receiver waits to
make the
recording.
If the DVD/CD/VCR receiver is DVD
mode,
even
with the
DVD/CD/VCR receiver is power on, it will record any timer
programme.
To stop the timer
recording,
press POWER twice.
27
OPERATION
Operation
with
If Timer record events
tape
Overlap...
Change (Deleting)
Do not
overlap programmes, since overlapping portions
conflicting programmes will not be recorded.
Earlier recording times have priority over later recording
times as shown in the diagram.
of the
Example:
Programme
If at
a later date you wish to delete or change any of
settings in timer event memory you may do so without having to enter all the timer event information again.
Simply display the timer event screen. Press D or E to
select the event that you wish to delete or change.
the
Programme
entirety,
but
only
2 will be recorded.
Press OK to change, then press F or G to select;
Station, Date, Start and End times, VPS and LP.
Press D
or
E to enter the correct information.
The Video
PROGRAMME 1
Programme System (VPS)
17:00
16:00
The Video
17:30
useful with
timer record event. This
sports
will not be
Currently only a limited
mit VPS signals.
recorded.)
Please make
timer
recordings overlap
at
00:00 a.m., programme 2 will not be recorded.
events which may
signal
the start
be par-
can
is transmitted
run over
by
the
broadcaster and this controls your video recorder's
timer.
PROGRAMME 2
programmed
a
into extra time. The VPS
16:30
(This portion
Programme System (VPS) adjusts
and end times of
ticularly
28
Programme
Press F to delete the event...or
1 will be recorded in its
the last 30 minutes of
If two
the Timer
midnight
number of TV
companies
trans-
sure that when recording from channels that do not broadcast VPS that you turn VPS
OFF.
Operation
Playing
a
with DVD and Video CD
Playback Setup
Turn
on
General Features
DVD and Video CD
DVD
VCD2.0
VCD1.1
the TV and select the video
input
ote
source con-
the
system: Turn
input
source
on
the audio
2
3
system and select
Moving
When
automatically.
If
playback
press PLAY.
In some cases, the disc
menu
Press
playback
appear
DVD
When
The
a menu screen
is
may be displayed first after
Video CD which offers a menu.
menu screen
DVD
or
loading
a
than
a
one
title, you
can move
to
follows:
(0-9)
to select
title number.
a
a
title, then press ENTER.
to another CHAPTER/TRACK
title
on a
more
chapter/track
1/3
1 /12
VCD1.1
disc has
displayed
as
more
Press 1 2 to select
Moving
instead.
If
DVD
DISPLAY, then press the appropriate number
button
does not start,
might
disc has
a
another title
Load your chosen disc in the tray, with the
playback side facing down.
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and
to another TITLE
1/3
Press OPEN/CLOSE to open the disc tray.
starts
use
connected to the DVD/CD/VCR
receiver.
1
otherwise, all operations described
the remote control. Some features may also be
available on the Setup menu.
nected to the DVD/CD/VCR receiver.
Audio
Unless stated
disc has
than
as
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
Press .or >
briefly during playback to return to
beginning of the current chapter/track or to select
the next chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
the
DVD
Use the 1 234 buttons to select the
want to
view, then press ENTER
Press TITLE
or
title/chapter you
playback.
to start
DISC MENU to return to the
menu
press DISPLAY. Then, press 3/4 to select the
screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
the
operating procedures for
depending on the disc.
using
may differ
Follow the instructions on the each
You also may set PBC to Off under
22.
menu screen.
setup. See page
If Parental Control is set and the disc is not within the
the
4-digit
code must
be entered and/or the disc must be authorized
(see
"Parental
Control", on page 23).
DVDs may have a region code.
Your DVD/CD/VCR receiver will not
have
regional code
regional code for this
a
otes
For
two-digit numbers, press the numbered buttons
(0-9)in rapid succession.
OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the Repeat function. See page 22.
Search
otes
Rating settings (not authorized),
1
menu screen.
and the exact
menu
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9) or press
2 to select the chapter/track, then press ENTER.
VCD2.0
DVD
1 Press and hold .
or
VCD1.1
> for about two seconds
during playback.
The receiver will
now
go into SEARCH mode.
2 Press and hold .
play
discs that
different from your receiver. The
receiver is 2 (two).
or > repeatedly to select the
required speed: mX2, mX4, mX16, mX100
(backward) or MX2, MX4, MX16, MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
3 To return to normal
play,
press PLAY.
29
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
(continued)
VCD1.1
To
during playback.
The DVD/CD/VCR receiver will
now
a
play,
VCD2.0
2 Press BACKWARD
(.)
now
go into PAUSE
FORWARD
or
1 Press DISPLAY
display
(>)
appears
2 Within 10
t
the
playback
DVD
in
is not
reverse
VCD2.0
TRACK
seconds from left to
applicable
the number buttons to enter
right
hours, minutes, and
in the box.
seconds, press ENTER
confirm the start time.
invalid
starts from the selected time
ALL
This unit
repeat the currently playing chapter, press
Repeat Chapter
icon appears
on
the TV
screen.
repeat the title currently playing, press REPEAT
Title icon appears
Repeat mode,
Repeat
Video CDs
-
Repeat
a
on
the TV
screen.
on
the TV
a
third time.
on
the TV
screen.
repeat the disc currently playing, press REPEAT
All icon appears
on
the TV
a
screen.
Repeat mode, press REPEAT
Repeat
Off icon appears
on
the TV
a
third time.
screen.
ote
Video CD with
menu
to
use
PBC, you
the
Repeat
VCD1.1
3D SUR
can
produce
a
3D Surround
effect, which
playback
conventional stereo
instead of the five
speakers,
speakers normally required
multi-channel audio from
MODE
Track/All/Off
Track icon appears
VCD2.0
DVD
a
from two
must set PBC to Off
on
function. See page 22.
or
to listen to
home theater
2 To turn off the 3D Surround
screen.
second time.
Repeat
point.
system.
during
playback.
repeat the track currently playing, press REPEAT.
Repeat
current
1 Press SOUND MODE to select "3D SUR"
press REPEAT
Off icon appears
the disc. If you enter
time, playback will continue from the
simulates multi-channel audio
more
second time.
Repeat
on
press PLAY to
OFF
Repeat Chapter/Title/Off
-
or
VCD1.1
REPEAT.
30
to select the Time
display.
4 Within 10
for
BYPASS
DVD Video Discs
setup
use
start time. Enter
3D Surround
TITLE
CHAPT
a
on-screen
seconds,
required
Playback
Repeat
On
time of the
The "-:--:--" appears in the Time Search box.
3 Within 10
an
The
on-screen
elapsed playing
seconds, press 3/4
Search icon in the
Video CD.
The
The
screen.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
Slow motion
3 To exit
the
on
at
playing
current disc.
ote
2 To
point.
-:--:--
during playback.
The Time Search box shows the
pause mode.
(.) or FORWARD (>) to
select the required speed: t 1/16, t 1/8, t 1/4,
1/2 (backward), or T 1/16, T 1/8, T 1/4, T 1/2
(forward).
To return to playback, press PLAY ( B).
The
0:20:09
DVD
The Time Search function allows you to start
any chosen time on the disc.
(X) during playback.
The DVD/CD/VCR receiver will enter SLOW mode.
1 To
at your chosen end
briefly on the TV screen, and the repeat
begins (" A↔B" appears the display window).
sequence
3 Use BACKWARD
The
again
"A B" appears
mode.
3 To exit
starting point.
"
VCD1.1
The DVD/CD/VCR receiver will
The
title:
a
press PLAY.
DVD
1 Press PAUSE/STEP
2 To
sequence in
Time Search
Slow Motion
The
VCD1.1
3 To cancel the sequence, press REPEAT A-B.
3 To return to normal
1 To
VCD2.0
OFF
2 Press REPEAT A-B
advance the
control.
4
AB
repeat
"
go into PAUSE
picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the remote
can
during
DVD
1 Press REPEAT A-B at your chosen
A? appears briefly on the TV screen.
mode.
2 You
A*
Frame-by-Frame Playback
1 Press PAUSE/STEP
A-B
Repeat
the
again
effect, press SOUND
to select "BYPASS".
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
during playback
or
still
the
repeatedly,
discs: Menus
to
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
level
press the appropriate number button to select an option.
Or, use the 1 234 buttons to highlight your selection,
then press ENTER.
playback
magnification
steps.
2 Use the 1 234 buttons to
move
the zoomed
through
picture.
3 Press CLEAR to
the
normal
resume
playback
or
the contents of DVD Video
Checking
activate the Zoom function.
If you press ZOOM
increases up to six
return to
paused image.
Title Menu
DVD
1 Press TITLE.
If the current title has
screen.
ote
The Zoom function may not work for
some
2 The
DVDs.
VCD2.0
DVD
menu, the
list
menu can
menu
menu
will appear
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
the
on
may appear.
again.
VCD1.1
Disc Menu
MARKER SEARCH
1/9
a
Otherwise, the disc
and subtitle
3 To
Marker Search
DVD
VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
(continued)
DVD
1 Press DISC MENU.
You
can
nine
points
To enter
1
start
playback
from
memorized
a
point. Up
be memorized.
can
The disc
to
2 To
mark, follow these steps.
a
Camera
memorize.
The Marker icon will appear
2
Repeat step
on
the TV
1 to enter up to nine Marker
points
on a
disc.
To Recall
1
a
Marked Scene
disc
During
playback,
The MARKER SEARCH
menu
will appear
the
screen.
3 Press ENTER.
will start from the Marked
scene.
the MARKER SEARCH menu, press
SEARCH.
To clear
1
a
During
playback,
The MARKER SEARCH
2
3
DVD
scenes
1/1
recorded at different
camera
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
Changing
angle
appears
on
the Audio
Language
Press AUDIO
ferent audio
the TV
a
screen.
repeatedly during playback
language or audio track.
D
DVD
5.1 CH
to hear
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(STER., LEFT or RIGHT).
Subtitles
press SEARCH.
menu
will appear
on
the
screen.
Press 1/2 to select the Marker number that you want
to
press
VCD2.0
a
dif-
VCD1.1
a
dif-
ferent audio channel
Marked Scene
disc
play,
1 ENG
on
recall.
remove
Angle
The number of the current
seconds, press 1/2 or use the number
buttons to select a Marker number that you want to
4 To
to return to
press SEARCH.
2 Within 10
Playback
menu or
again.
If the disc contains
briefly.
screen
displayed.
the disc
remove
DISC MENU
During disc playback, press MARKER when
playback reaches the spot that you want to
is
menu
DVD
ABC
1 ENG
Press SUBTITLE
different subtitle
repeatedly during playback
languages.
to
see
the
erase.
Press CLEAR.
ote
The Marker number will be erased from the list.
4
Repeat steps
5
To
2 and 3 to
erase
If
appears, the feature is not available
on
the disc.
additional Marker
numbers.
remove
the MARKER SEARCH menu, press
SEARCH.
31
OPERATION
with Audio CD and MP3/WMA Disc
Operation
Playing an Audio CD and MP3/WMA Discs
MP3
CD
Notes
on
MP3/WMA
About MP3
WMA
The DVD/CD/VCR receiver
can
An MP3 file is audio data
MP3/WMA format-
play
recordings on CD-ROM, CD-R or CD-RW discs.
playing MP3/WMA recordings, read the notes
MP3 Recordings on right.
MPEG1 audio
ted
Before
files that have
on
The
player
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
can
not read
extension other than
Insert
disc and close the tray.
Audio CD; Audio CD menu appears
1
Recordings
an
MP3 file that has
file
a
".mp3".
a
on
the TV
About
go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
screen
menu
appears
the TV
on
Go to
screen.
a
technology.
WMA(Windows
compression of
2
step
WMA(Window Media Audio)
An WMA file is
MP3 WMA
Microsoft audio
Media
Audio)
compression
offers double the audio
the MP3 format.
JPEG
Press 3/4 to select the MP3/WMA then press
ENTER or PLAY.
The MP3/WMA menu appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
2
choice
MP3/WMA Disc
1.
as
follows:
Sampling Frequency / only at 44.1kHz (MP3),
44.1kHz (WMA)
Bit rate / within 32 320kbps (MP3),
32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "Easy22.05
2.
menu.
with this DVD/CD
compatibility
receiver is limited
-
-
-
Program
MP3/WMA
3.
TRACK 1.mp3
TRACK 2.mp3
4.
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
Clear All
TRACK 8.mp3
00:00
OFF
1
CD
5.
Press 3/4 to select
and ENTER
3 A list of files in the folderfolder,
appears.
a
or
PLAY.
A
Press 3/4 to select
ENTER.
Playback starts.
During playback,
a
track,
track then press PLAY
Press TITLE to
the current track's
elapsed playing
menu
menu.
to the next page.
move
Program
CD
move
to the
previous
menu
Program
MP3/WMA
TRACK
TRACK03
TRACK
TRACK04
TRACK
TRACK05
TRACK
TRACK06
TRACK
TRACK07
Clear All
STER.
BYPASS
1.mp3
2.mp3
3.mp3
4.mp3
5.mp3
TRACK
6.mp3
7.mp3
TRACK
8.mp3
00:00
Clear All
1
OFF
list,
are
use
in
To
32
a
file list and want to return to the Folder
the 3/4 to
return to the
5
MP3/WMA files. If you wish
files, format all the data in
or use a new one.
names
should be named
incorporate ".mp3"
e.g. "********.MP3"
or
using
or
and
highlight
previous menu screen.
stop playback
at any other
8 letters
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
This DVD/CD/VCR receiver
requires discs/recordings
press ENTER to
optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R
containing MP3 or WMA files). That require certain preexisting conditions (see above) to insure compatible
playback.
required
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
grant such permission. Permission should
to
always
time, press STOP.
to
meet certain technical standards in order to achieve
Customers should also note that
ip
If you
MP3/WMA file in the 1st
playback
MP3/WMA
system.
MP3/WMA files in the
page.
MP3/WMA
TRACK
TRACK02
0: 56: 18
File
no
ISO9660 file
an
requires
650.
TRACK01
TRACK08
playback
and must
Press DISC MENU to
Audio CD
it cannot
the disc
or
6.
time will appear on the display window and
Playback will stop at the end of the disc.
creates
session disc
first track. If there is
to
4
Creator", which
single
be
sought
from the
copyright
owner.
right
Operation
Pause
with Audio and MP3/WMA Disc
MP3
CD
1 Press PAUSE/STEP
ENTER
Moving
during playback.
to another Track
MP3
CD
or
WMA
can
CD
produce
a
3D Surround
simulates multi-channel audio
effect, which
playback
from two
conventional stereo
speakers, instead of the
speakers normally required to listen to
five
more
multi-
channel audio from
a
home theater
or
>
briefly during
beginning
to return to the
of the current
to
briefly
step
back to the
previous
OPERATION
during
playback.
2 To turn off the 3D Surround
to go to the next track.
Press . twice
or
system.
1 Press SOUND MODE to select "3D SUR"
playback
or
This unit
press PLAY, PAUSE/STEP
playback,
again.
Press .
track
3D Surround
WMA
2 To return to
(Continued)
MODE
again
effect, press SOUND
to select "BYPASS".
track.
In
case
of audio
CD,
the track number
directly to any track, enter
the numbered buttons (0-9)
to go
using
during playback.
the Audio Channel
Press AUDIO
repeatedly during playback to hear a
(STER., LEFT, or RIGHT).
CD
different audio channel
Repeat Track/All/Off
1 To
Changing
MP3
CD
WMA
repeat the track currently playing, press REPEAT.
The
Repeat
icon and "TRACK" appears
the
on
menu
screen.
2 To
repeat all tracks
on a
disc, press REPEAT
a sec-
ond time.
The
Repeat
3 To cancel
The
icon and "ALL" appears
Repeat mode,
Repeat
Search
MP3
1 Press and hold .
on
the
a
third time.
menu screen.
> for about
or
during playback.
The
now
will
menu screen.
WMA
two seconds
player
the
press REPEAT
icon and "OFF" appears
CD
on
go into SEARCH mode.
2 Press and hold .
or > repeatedly to select the
required speed: mX2, mX4, mX8 (backward) or
MX2, MX4, MX8 (forward).
Search
speed
and direction
are
indicated
on
the
menu
screen.
3 To return to
Repeat
To
1
repeat
A-B
a
CD
sequence.
During disc playback,
sen starting point.
The
Repeat
2 Press A-B
The
press PLAY.
playback,
Repeat
press REPEAT A-B at your cho-
icon and "A*
"
appears
on
the
menu screen.
at your chosen end point.
icon and "A B" appears on the menu screen,
again
and the sequence
begins
to
play repeatedly.
3 To exit the sequence and return to normal
A-B again.
The
Repeat
icon and "OFF" appears
on
the
play,
press
menu screen.
33
Operation
Viewing
with JPEG Disc
JPEG disc
a
This DVD/CD/VCR receiver
JPEG
play discs with JPEG
files and Kodak picture CD. Before playing JPEG
recordings, read the notes on JPEG Recordings on right.
Insert
1
a
can
TV
to another File
Press .
or
>
menu
appears
on
the
while
once
advance to the next file
or
viewing a picture
previous file.
to
to the
Still Picture
1 Press PAUSE/STEP
disc and close the tray.
The MP3/WMA-JPEG choice
Moving
during
slide show.
The DVD/CD/VCR receiver will
now
go into PAUSE
mode.
screen.
2 To return to the slide
PAUSE/STEP
MP3 WMA
show, press PLAY
or
press
again.
JPEG
To
2
menu
on
appears
the TV
picture
Press 3/4 while
Press 3/4 to select the JPEG then press
ENTER.
The JPEG
the
flip
horizontally
or
showing
vertically.
to
picture
a
flip
the
picture
screen.
To rotate
JPEG
Folder1
Press 1/2
Folder2
Folder3
during showing
clockwise
picture
Folder4
picture
or
a
picture
to rotate the
counterclockwise.
Folder5
Folder6
Folder7
Folder8
Slide
Speed
Notes
Off
JPEG
on
upon the size and number of the JPEG
a long time for the DVD/CD/VCR
Depending
3
Press 3/4 to select
PLAY.
a
folder, and press ENTER
or
A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice
menu.
list,
are
"
file list and want to return to the Folder
a
the 34 buttons
use
"
in
on
the remote to
highlight
menu screen.
If
want to view
you
4 highlight
a
particular file, press
file and press ENTER
the file proceeding starts.
a
JPEG
move
3/4 to
to
move
to
to the next page.
Picture2.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
1024X768
Slide
Speed
5/32
Off
move
to the
viewing
Slide
1024X768
previous
Picture5.jpg
page.
ip
are
three
Speed options: Fast,
to highlight the Slide
select the option you want to
Normal, Slow, and Off. Press 1/2
Speed
then press 3/4 to
use, and press ENTER.
5
To
stop viewing
The JPEG
34
big
---
reduce the resolution of the
menu
at any other
appears.
pixels
on
and burn anoth-
the disc should
When you are using software such as
Creator" to burn the jpeg files into the
copying
time, press STOP.
into the CD
"Easy
CD
CD-R,
ensure
".jpg"
extensions
layout.
If the files have
rename
them
".jpe" or ".jpeg" extensions, please
as ".jpg" files.
without
names
be read
by
the files
are
explorer.
Picture3.jpg
Press MENU to
too
be less than 650.
File
Picture1.jpg
There
are
Total number of files and folders
when
Folder1
5/32
the files
that all the selected files have the
PLAY.
or
Viewing
During viewing a file, press RETURN
the previous menu (JPEG menu).
Press TITLE to
receiver to read the disc's contents. If you don't see
display after several minutes, some of
an on-screen
Some disc may be incompatible due to different
recording format or condition of disc.
and press ENTER to return to the
previous
files, it could take
JPEG files to less than 2 mega
er disc.
ip
If you
Recordings
".jpg"
extension will not be able to
this DVD/CD/VCR receiver. Even
shown
as
JPEG
image
though
files in windows
Programmed Playback
Programmed Playback
CD
VCD2.0
with Audio CD
mode to enter
during playback or in
the Program Edit mode.
E
The
mark will appear to the right of the word
the right side of the menu screen.
on
a
Video CD with
setup
menu
Program
Press PROGRAM
1
On
contain 30 tracks.
can
with Video CD
ote
function enables you to store your
favourite tracks from any disc in the player memory.
Program
Program
WMA
Programmed Playback
and MP3/WMA Discs
The
MP3
VCD1.1
the stop
to
must set PBC to Off
PBC, you
the
use
on
the
function. See page 22.
Program
contain 30 tracks.
can
OPERATION
Insert Video CD and close the tray.
1
Program
VCD
Program
E
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
ote
TRACK 7
Clear All
TRACK 8
Press PROGRAM to exit the
E
the
mark will
Select
2
Program
Edit
disappear.
track, then press ENTER
a
mode;
selected track
2 to
step
3 Repeat
Program
the
on
Program
place
to
place
2
the
list.
additional tracks
on
the
list.
Press PROGRAM while
The VCD
Program
menu
playback
is
stopped.
will appear.
ote
Press
RETURN, PROGRAM
or
PLAY to exit the
Program
menu.
E
Program
CD
TRACK 12
TRACK 2
TRACK 8
TRACK 1.mp3
TRACK 2.mp3
TRACK 3
TRACK 10
TRACK 3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 4
E
TRACK 8.mp3
3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5
steps 2-6 of "Programmed Playback with
Clear All
TRACK 8
STER.
0: 56: 18
Audio CD
BYPASS
TRACK 7.mp3
00:00
OFF
3
MP3/WMA
menu
To
resume
"PROG." indicator
menu
programmed
track you selected last is
highlighted
on
To
5 playing.
or
To
repeat all tracks
The
6 Playback begins
ENTER to start.
To
played
normal
select
menu
a
the program
icon and "ALL" appears
Repeat mode,
list, press
Track from
on
the
menu screen.
press REPEAT
icon and "OFF" appears
Repeat
Erasing
on
on
the
Programme
a
third time.
menu screen.
List
1 Press PROGRAM
once.
resume
playback,
the
on
second time.
a
Repeat
The
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks on the Program list
window.
Tracks
icon and "TRACK" appears
Repeat
To cancel
Press PLAY
display
screen.
REPEAT
to the next page.
Press MENU to move to the previous page.
move
in the
repeat the track currently playing, press REPEAT.
The
Press 3/4 to select the track you want to start
Press TITLE to
from
disappears
Repeat Programmed
Press 2.
have
normal
playback
4 programmed playback,
press PROGRAM.
Clear All
TRACK 8.mp3
the program list.
7
left.
on
TRACK 6.mp3
TRACK 7
The
Follow
Audio CD and MP3/WMA disc"
TRACK 5.mp3
TRACK 6
4
Program
MP3/WMA
TRACK 1
a
playback
from
track of CD
programmed
(or MP3/WMA) list
and then press ENTER or PLAY.
"PROG." indicator disappears in the display
window.
MP3/WMA disc
during playback (Audio CD and
only) or stop to enter the Programme
Edit mode.
E
The
mark will appear.
2 Press 2 to
move
to the
Programme
list.
3 Use 3/4 to select the track that you wish to
from the Programme list.
erase
4 Press CLEAR.
The track will be erased from the
Erasing
1 Follow
List"
as
the
complete Programme
steps
1-2 of
"Erasing
a
list.
List
Track from
Programme
above.
2 Use 3/4 to select "Clear
The
Program
complete Program
The programmes
are
All", then press ENTER.
for the disc will be erased.
also cleared when the disc is removed.
35
Additional Information
Speaker Setup
Adjust
the
following settings
for the built-in 5.1 channel
Last Condition
surround decoder.
DVD
CD
Memory
VCD1.1
Disc Audio
This DVD/CD/VCR receiver memorizes the
Disc Subtitle
R
Disc Menu
Code
Volume
Menu
0 dB
Size
Aspect
set-
switch off the player. If you load a disc that
settings memorized, the latest stop position is
automatically recalled.
player
Small
Distance
Language
user
for the last disc that you have viewed. Settings
remain in memory even if you remove the disc from the
tings
Front L
Rating
Country
TV
R
or
has its
1 ft
Test
Return
5.1
Speaker Setup
otes
Others
--
--
1
Select "5.1
Speaker Setup" using
buttons
the setup
2
While "5.1
on
the 3/4
is selected, press 2
button.
Press 2 buttons to select the desired
3
4 Adjust options by using
Speaker
Select
speaker.
341 2 buttons.
selection
speaker that you want to adjust. ((Front speak(Left), Front speakers (Right), Centre Speaker, Rear
speakers (Left), Rear speakers (Right), or Subwoofer))
a
ers
ote
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Volume
Press 1 / 2 to
speaker. (-6dB
adjust the output
+6dB)
level of the selected
~
Size
Since the
speaker settings
settings.
the
fixed, you
are
cannot
change
Distance
If you connected speakers to your DVD/CD receiver
setting the Distance lets the speakers know how far the
,
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the
same
time.
(1
ft
=
30.48
cm)
ote
You
can
not set the distance of subwoofer
speaker.
Test
Press ENTER to test the
Adjust
signals
of each
speaker.
signals
the volume to match the volume of test
memorized in the
Front Left
Rear
(L)
Right (R)
system.
→
Centre
→
Front
→
Rear Left
(L)
Right (R)
→
→
Subwoofer
Return
Press ENTER to return to the
36
previous
menu.
time.
a
disc if
you switch off the DVD/CD/VCR receiver before
mencing to play it.
menu.
Speaker Setup"
Settings are stored in memory for use any
This player does not memorize settings of
com-
Additional
On Screen
Operation
-
VCR part
Display
You may
easily display the clock or tape counter and
tape remaining, day, month, year, day of week,
programme channel, tape speed and VCR function on
the TV
If
a
(Video Doctor)
This feature informs you that there is a problem with
your DVD/CD/VCR receiver. These error messages will
appear
on
the TV
screen.
screen.
recording
is
taking place
will not be recorded onto the
Press CLK/CNT to
1
User Guide
Friendly
these On Screen
Displays
tape.
1
Press i.
Press F
or G
OPERATION
to select Dr. and press OK.
display.
VCR
VIDEO DOCTOR
Dr.
HEAD STATUS
VCR
Function/
STOP
Tape Speed
Programme
TF1
STEREO
SP
TAPE STATUS
NO. OF TIMER PROGRAMME
Channel
STEREO
NEXT TIMER PROGRAMME
NICAM
OK
i
Day/Month/
Year/Day of
1. 01. 03 WED
Clock/Tape
Counter &
12:00
Tape
remaining
Week
2
Press CLK/CNT
repeatedly
to
display
2
the tape
to check
problem.
a
HEAD STATUS
counter.
During playback or recording, the tape remaining
displayed with the tape counter.
or E
Press D
O PLEASE CLEAN:
is
Clean your video heads.
TAPE STATUS
3
After 3 seconds the
display will clear from the
TV screen, leaving only the clock or tape counter and tape remaining on the TV screen.
Press CLK/CNT again to remove all displays
O NOT RECORDABLE:
Insert
tape with its protection tab in place
NO. OF TIMER PROGRAMME
from the TV screen.
O
The
tape remaining will only be accurate for
tapes.
The tape remaining indicator may not be
accurate, since it depends on the type or condition
of tape used. Also, the tape remaining indicator is
E-180 and E-240
displayed just after a cassette has been inserted, or after playback or recording has begun.
a
2Shows
the number of timer
recording.
NEXT TIMER PROGRAMME
O ARD1 26 10:00~11:00SP
Shows the current status of timer
not
Tape Counter Memory Stop
The
Counter
Digital Tape
screen
instead of the time
displayed on your TV
by pressing CLK/CNT on the
can
be
remote control.
The
Counter indicates the relative
of
the
Digital Tape
recordings on
1
2
Press CLK/CNT
displayed
on
positions
tape.
repeatedly
the TV
until the counter is
(H)
Press i to
recording.
display the actual play
tape counter will
hours, minutes and seconds.
time in
remove
the
menus
from the TV
screen.
(easy) Repeat
BY
pressing & holding REPEAT during play back,
holding section is replayed twice automatically.
1
During play back, press
point where repeat play
the
& hold REPEAT at he
is to be concluded.
Then, your DVD/CD/VCR receiver will go into
reverse
to start
The
ez
screen.
Press CLEAR to set the counter to 0:00:00.
Press PLAY
3
recording.
2
search.
Release REPEAT at the
point
where
repeat play
is to start.
Holding
section is
replayed
twice
automatically.
ote
Press STOP when
3 complete.
4
playback
or
recording
is
Pressing
REPEAT
again during repeat play,
DVD/CD/VCR receiver will return to normal
the
play.
Press BACKWARD.
The
tape will rewind and automatically stop when
the counter returns to 0:00:00.
Please note: If FORWARD is
counter mode indicates
will not
a
pressed when
negative value, the tape
stop.
37
Additional
Operation
Hi-Fi Stereo Sound
VCR part
-
Widescreen
System
Your DVD/CD/VCR receiver will record
Hi-Fi stereo sound. In addition it has
a
and
play back
digital
Your Receiver
NICAM
back the sound in several different ways. Video
on your DVD/CD/VCR receiver will
normal
a
audio track and two VHS Hi-Fi
mono
stereo audio tracks. These stereo tracks allow you to
make audio recordings in Hi-Fi stereo or bilingual mode
from
a
TV
broadcast,
stereo audio
system, video disc
play
back widescreen
a
wide
format programme successfully the correct type
of widescreen signal must be broadcast by the TV sta-
screen
cassettes recorded
have
record and
can
aspect ratio programmes (16:9). To record
stereo sound decoder. This allows you to record and
play
16:9
Compatibility
tion.
1
Press i and press F
Press OK.
or G
to select 16:9/4:3.
or
another Hi-Fi VCR.
1
Your DVD/CD/VCR receiver's NICAM
digital
AB
12
VCR
C
Pr-12
sound decoder allows you to enjoy broadcasts
with NICAM sound, as well as standard stereo
NICAM, bilingual and mono sound.
particular type of sound received
The
recorded will be
for
couple
a
briefly displayed
on
or
that
the TV
screen
2
of seconds:
and
automatically
mono
recorded
tracks of the video
on
on
primary language
the
mono
mono
on
track of the video
Dr.
16:9
4:3
repeatedly
OKi
to select
:
AUTO, 4:3
or
back Widescreen programmes
as normal.
as
Widescreen and Normal programmes
4:3:
on
Only for playing
ings (4:3).
the Hi-Fi
channel
track of the video
(left)
will
the Hi-Fi tracks and the
tape without any separation.
back and
recording
Normal format record-
Widescreen format
16:9:
tape.
MONO
The sound is recorded
OPR
16:9
16:9.
Automatically plays
the Hi-Fi stereo
tape.
Both audio channels will be recorded
be recorded
AUTO
4:3
-
DECODER
16:9
4:3
AUTO:
BIL NICAM
stereo tracks. The
or E
Press D
TIME
DATE
ACMS
+
ON
OFF
STEREO
Sound is
P
SET
R
REC
fOSD
3
Only for playing back
recordings (16:9).
and
recording
Press i to
the
menus.
remove
ote
STEREO
To
enjoy
Widescreen
playback you
using a SCART
Receiver to the TV
must connect your
lead.
To Set the Decoder
2
Press AUDIO
repeatedly
until the desired audio
mode appears.
The choice is
STEREO, LEFT (left channel),
RIGHT (right channel) and MONO.
In BIL NICAM playback the primary language is
output on the left channel and the secondary language is output simultaneously from the right channel when audio output is set to STEREO.
The primary language will be output from both
channels when the audio setting is MONO.
Please note that when adjusting the tracking control
Hi-Fi stereo sound may revert to MONO.
We have
already described, how to connect a decoder
pay-TV station as PREMIERE on page 10. For the
recording of an encoded station you do not have to control anything. You just select the station and wait shortly
until the decoding will start.
for
1
Press i.
The main
Press F
menu
or G
will appear
1
casts will be detected.
Pr-12
REC
of stereo sound
being received is
poor, the broadcast is automatically received in
monaural with better quality.
Still, if the quality of the sound is poor, set NIC in
the main menu to OFF (see p. 16). NICAM broadquality
the TV
screen.
Press OK.
ote
If the
on
to select the DECODER.
P
SET
R
fOSD
ON
OFF
2
Press D
or E
ACMS
+
16:9
4:3
T
DA
EIN
AUS
B
C
SD
VCR
+
Dr.
-
DECODER
-
DECODER
i
OPR
to select ON when the
receiving
encoded broadcast.
The connected decoder will be activated.
3
38
Press i to
screen.
remove
the
menus
from the TV
Special Recording
from DVD To VCR
Copying
Recording
This unit allows you to copy the contents of
VHS
a
DVD to
a
recorder
tape.
With the DVD/CD/VCR receiver you can make recordings from an external source, such as copying from
ote
If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted
another VCR
to copy Macrovision encoded DVDs. "LOCK" will blink
on
the
1
2
window.
display
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
Insert
a
Tape.
blank VHS video
Press PLAY
(H)
on
The DVD will go into
If the DVD disc
the PLAY
used
1
following description, this DVD/CD/VCR receiver
one used for recording and other VCR will be
for playback.
VCR should be connected to the
SCART sockets
the DVD deck.
mode
appears, you may need to press
(H) manually
to
4
5
Stop
and
or
again.
the unit may
the
on
Press AV until the socket you wish to record
from is
displayed.
on
recording using
the lower
the back of your DVD/CD/
AV2 Sound and Picture
Process.
ends,
over
of the
panel
VCR receiver.
EURO AV2 socket
playing, press STOP (x)
twice within 5 seconds to end the copy.
You must stop the Copy process manually when the
DVD movie
panel
or
one
of your
the AV3 sockets
rear
of your DVD/CD/VCR receiver.
EURO AV1 socket
.
When the DVD is finished
over
the
AV1 Sound and Picture
(z)
press COPY/MEMORY
The VCR receiver will go into Record mode.
Copy
2
begin copying.
or
on
DVD/CD/VCR receiver
tape into the VCR deck.
play
menu
Press REC/ITR
the
camcorder.
will be
Insert Disc.
Insert VHS
or a
ote
In the
front
3
from another video
replay
on
recording using the upper
the back of your DVD/CD/
VCR receiver.
AV3 Sound and Picture
on
and record
recording
from AV3 sockets
the front of your DVD/CD/VCR receiver.
Insert the recorded tape into VCR and
into DVD/CD/VCR receiver.
a
4
To start
on
5
When you want to finish copying, press the
STOP (x) on both appliances.
3 tape
recording, press
REC/ITR
(z)
DVD/CD/VCR receiver and press PLAY
Press STOP
(x)
blank
on
VCR.
twice within 5 seconds at
DVD/CD/VCR receiver.
39
OPERATION
Radio
Operation
the Radio Stations
Presetting
You
can
ing,
make
1
to the Radio
Listening
30 stations for FM and AM. Before tun-
Preset radio stations in the DVD/CD/VCR receiver
that you have turned down the volume.
memory first
preset
sure
Press FM/AM
on
the remote control
front
until the
the
and TV
panel
display
frequency
or on
the
band appears
on
1
screen.
(see "Presetting
Press FM/AM
on
the remote control
front
until the
the
and TV
panel
display
radio stations"
frequency
on
the
or on
left).
the
band appears
on
screen.
The last received station is tuned in.
2
RADIO
AM
01
522kHZ
Press 3/4
remote
the remote control to select your
on
repeatedly
to
by rotating VOLUME on the
by pressing VOLUME + or on the
control repeatedly.
3 Adjustpanel
front
2
the remote control
on
the volume
OK, CLEAR
,
Press 3/4
select the preset station you want.
Each time you press the button, the DVD/CD/VCR receiver tunes in one preset station at a time.
or
-
desired radio channel.
To Clear the Stored Radio Stations
RADIO
FM
,
3
4
OK, CLEAR
Press FM/AM
front
on
the remote control
or on
Press FM/AM
on
4
TUNING
hold down 1 and 2
until the
the
and TV
panel
display
2
frequency
or on
the
band appears
on
screen.
the
3
on
on
the front
panel
RADIO
or
FM
seconds, and
a
06
108. 00MHZ
the remote control for 1
,
or
the remote control
front
to select the desired band.
panel
Hold down
1
06
108. 00MHZ
OK, CLEAR
station is searched for
automatically.
2
RADIO
FM
Press 3/4
on
the remote control to select your
desired station.
06
87. 50MHZ
,
OK, CLEAR
RADIO
AM
5
Press MEMORY
on
the remote control
COPY/MEMORY
on
the front
,
or
OK, CLEAR
press
panel.
3
6 Repeat steps
10
522kHZ
Press CLEAR the remote control to clear the
stored radio station.
2 to 5 to store other stations.
RADIO
FM
10
98. 00MHZ
,
OK, CLEAR
ote
While record
or
record pause
function may not be
40
operated.
mode, the CLEAR
with Radio
Operation
into
Tuning
1
2
3
a
Press FM/AM
Station
on
until the
the
and TV
Press FM/AM
front
panel
Press
4
on
RDS
Manually
the remote control
front
panel
display
(Continued)
frequency
or on
This unit is
the
band appears
on
screen.
the remote control
or on
the
to select the desired band.
TUNING
3
on
the front
panel
or
press
1 and 2 on the remote control to tune in the
desired station.
which
into
a
Station
Hold down 4 TUNING 3
down 1 and 2
seconds,
and
a
on
on
Automatically
the front
panel
the remote control for 1
station is searched for
hold
or
or
2
automatically.
equipped with RDS (Radio Data System),
brings a wide range of information to FM radio.
Now in
use
in many countries, RDS is a
station call signs or network
transmitting
description of
system for
information,
a
station programme type text message
about the station or specifics of musical selection and
the correct time.
RDS
When
Tuning
Operation
Tuning
a
FM station is tuned in and it contains RDS
data, the unit will automatically display the station's call
sign
and the RDS indicator will
Window
as
gramme
(PS)
RDS
well
light
in the
Display
indicators for the RDS services proif transmitted by the station.
as
Display
The RDS
system is capable of transmitting a wide variety of information in addition to the initial call sign that
ote
The search may not
weak signal.
stop
at
a
station with
a
very
appears when a station is first tuned. In normal RDS
operation the display will indicate the station name.
Pressing
Mute
Press MUTE to mute your unit.
can mute your unit in order, for
You
the
the
telephone,
display.
RDS
on
show the station
example,
to
answer
MUTING and MUTE indicator appear in
the remote control enables you to
name.
ote
If the RDS services programme (PS) is not being
transmitted, the Display Window will show a PS
NONE
message.
41
OPERATION
Language Code
Enter the
(See
appropriate
21).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
42
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
23).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
Coast
IN
India
NU
Niue
IO
British Indian Ocean
NZ
New Zealand
US
United States
Uruguay
Kingdom
Outlying
CI
Ivory
CK
Cook Islands
CL
Chile
Territory
OM
Oman
UY
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Verde
Anguilla
Islands
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
Republic
Islands
(French)
State
(British)
(USA)
43
REF NC
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
Cause
Symptom
Correction
No power.
The power cord is disconnected.
The power is on, but
the DVD/CD/VCR
No disc is inserted.
Insert
No
disc
Plug the power
securely.
tape is inserted.
picture.
disc or tape. (Check that the
tape indicator in the display
The TV is not set to receive
Select the
DVD/CD/VCR receiver
on
signal output.
cord into the wall outlet
a
or
window is
receiver does not work.
No
service.
lit.)
appropriate video input
the picture from the
the TV
DVD/CD/VCR receiver appears
TV
TV/VCR mode for DVD/CD/VCR receiverissettoTV.
on
the
screen.
Press the TV/VCR button on the remote
control repeatedly to choose VCR
mode. TV indicator
disappears
in the
window.
display
The video cable is not connected
mode
so
Connect the video cable
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
audio cable is not set to receive
Select the correct input mode on the
audio receiver so you can listen to the
DVD/CD/VCR receiver
sound from the DVD/CD/VCR receiver.
connected with the
equipment
The audio cables
are
signal output.
not connected
the TV.
on
Connect the audio cables
securely.
securely.
The power of the equipment connected
with the audio cables is turned off.
The
digital audio output
position.
is set to the
wrong
The
playback picture
is
poor.
The disc is
Tape
heads
Tape
is
a
rental
receiver does not start
playback.
connected with
Set the
digital audio output to the
position, then turn on the
DVD/CD/VCR receiver again by pressing POWER.
Clean video heads.
dirty.
recorded
or was
Use PR/TRK (v/V) for manual tracking
while tape is playing.
on
adjustment
No disc is inserted.
Insert
No
disc
tape is inserted.
disc or tape. (Check that the
tape indicator in the display
a
or
window is
An
equipment
Clean the disc.
another VCR.
The DVD/CD/VCR
the
on
the audio cables.
correct
dirty.
are
Turn
unplayable
Insert
disc is inserted.
lit.)
playable
a
disc.
(Check
the disc
type, color system, and Regional code.)
The disc is
placed upside
The disc is not
placed
Place the disc with the
down.
within the
guide.
Place the disc
inside the
dirty.
The
level is set.
The remote control is not
The remote control
does not work
properly.
sensor
pointed
at the
of the DVD/CD/VCR receiver.
The remote control is too far from the
DVD/CD/VCR receiver.
There is
an
tray correctly
guide.
Cancel the
the
remote
the disc
side down.
Clean the disc.
The disc is
Rating
on
playback
obstacle in the
path
of the remote
rating
Rating
function
or
change
level.
Point the remote control at the remote
sensor
of the DVD/CD/VCR receiver.
Operate
(7 m).
the remote control within 23 ft
Remove the obstacle.
control and the DVD/CD/VCR receiver.
The batteries in the remote control
are
Replace
the batteries with
new ones.
exhausted.
This remote control
44
uses
the
same
When
using
a
VCR, first press the VCR
a DVD, first press
buttons for VCR and DVD functions
button. When
(ex. PLAY).
the CD/DVD button.
using
Troubleshooting (Continued)
Cause
Symptom
Correction
The DVD/CD/VCR receiver is in the
Press PAUSE/STEP
during recording.
RECORD PAUSE MODE.
recording.
The
The
The
or
tape does
tape will
not
run
not rewind
Check the
or
If
playback picture
you're using only
Set the TV to the Video channel
the RF cable for
connection.
15).
Noise appears
visual search.
This is normal.
Turn camcorder
during
The automatic
Breaks
The automatic
noticeable
in Hi-Fi soundtrack.
operate proper-
tracking
mode is
Try
manual
tracking (see
p.
24).
tracking
mode is
Try
manual
tracking (see
p.
24).
engaged.
There is
cannot be
no
tape loaded,
or
loaded has had its record
Tape-to-tape editing
not possible.
recording
and
p.
engaged.
started.
Timer
on
(see
ly.
Noise appears during
normal playback.
Recording
resume
tape.
does not appear while
the tape is running.
are
to
fast-forwarded.
fast-forward.
The
tape is already fully rewound
(X)
is
won't
work.
the
tape
Insert
a
tab
cover
the hole where the tab
safety
tape,
or
using
adhesive
removed.
removed.
The
Confirm that the camcorder is
source
(another VCR, camcorder)
properly connected.
has not been
connected.
The clock/or the timer have been set
Re-perform
tings.
incorrectly.
The timer is not
tape,
was
properly
the clock and/or timer set-
Press POWER and confirm that the
engaged.
timer indicator is
displayed on the
Display.
DVD/CD/VCR receiver's
The loaded
safety
PLEASE CHECK appears
entering ShowView
when
Code
programming
tape has had its record
tab removed.
Insert
a
insert
a
pate with adhesive tape, or
tape with the record safety tab
intact.
Incorrect the ShowView Code programnumber.
ming
Re-enter the ShowView Code program-
ming
number.
num-
ber.
Audio mode is not set
No Hi-Fi sound.
properly.
Select "STEREO"
ing
AUDIO
on
by repeatedly pressthe remote control.
Moisture Condensation
Moisture condensation
?
cold
?
place
Under
to
a warm
extremely
In locations where moisture condensation may
can occur:
When the DVD/CD/VCR receiver is moved from
a
?
outlet with POWER On. This will
place.
humid conditions.
Keep
the DVD/CD/VCR receiver
?
When condensation has
into
plugged
help prevent
occurred, wait
for the DVD/CD/VCR receiver to
dry
occur:
AC power
condensation.
an
a
few hours
before
using
it.
45
REF NC
Specifications
General
Power
AC230V~ 50 Hz
Power
130 W
Timer
430X90X350mm(wxhxd)
8 kg (17.6 lbs)
5˚C to 40˚C (41˚F to 104˚F)
24-hour display type
Operating humidity
5%to90%
requirements
consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
,
DVD Section
Laser
Semiconductor
Signal system
Frequency response
PAL/NTSC
laser, wavelength
650
nm
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto20kHz
CD:8Hzto20kHz
Signal-to-noise
ratio
More than 70 dB
Harmonic distortion
Less than 1.0%
Dynamic
More than 60 dB
range
More than 60 dB
(analog
out connectors
only)
(DVD)
(CD)
Outputs
S-VIDEO OUT
(Y)
(C)
1.0 V
(p-p), 75 ohms, negative
(p-p) 75 ohms
0.3 V
sync, Mini DIN
4-pin
x
1
VCR Section
Head
system
Television
system
Recording
format
4 heads helical
scan
PAL B/G colour
azimuth
system
PAL
RF OUT
G
RF Modulator
UHF 22-68
Tape speed
PAL/MESECAM;
(Adjustable)
23.39 mm/s
recording
time
Rewind time
Input
level
Output level
Signal-to-noise
ratio
VIDEO: More than 43 dB
More than 42 dB
range
(SP),
35.35 mm/s
AUDIO: More than 72 dB
Dynamic
16.69 mm/s
(LP)
(Playback only);
(SP), 16.67 mm/s (LP),
11.12 mm/s (EP)
SP: 4 h (E-240 tape), LP: 8 h (E-240 tape)
About 180 min (E-180 tape)
VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
AUDIO: -6.0 dBm, more than 10 kohms (SCART)
-6.0 dBm, more than 47 kohms (RCA)
VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
NTSC
Maximum
system
(Hi-Fi)
(Mono)
AUDIO: More than 85 dB
Tuner Section
Tuning
FM: 87.5
range
AM: 522
Intermediate
frequency
-
-
108.0 MHz
1611 kHz
FM: 10.7 MHz
AM: 450 kHz
Amplifier Section
Stereo mode
Surround mode
20W+20W(4ohmat1kHz,THD10%)
Front: 20W + 20W (THD 10%)
Centre: 20W
Surround: 20W
+
Subwoofer: 40W
46
20W
(8
(4
ohm at 1
ohm at 30
Hz,
kHz, THD 10%)
THD
10%)
Specifications (Continued)
Speaker
Section
Satellite
1
4Ω
Sound Pressure Level
83 dB/W
Rated
20W
Input Power
Max Input Power
Net Dimensions (W
Net Weight
Way
1
Type
Impedance
Frequency Response
130
-
Speaker
20,000 Hz
REF NC
(1m)
40W
H
x
x
88x100x95mm
D)
0.54
kg
Passive Subwoofer
1
50
Sound Pressure Level
82 dB/W
Rated
40W
Input Power
Max Input Power
Net Dimensions (W
Net Weight
Way
1
Type
Impedance
Frequency Response
Speaker
8Ω
1,500 Hz
-
(1m)
80W
x
H
x
160x350x325mm
D)
4.12
kg
Accessories:
RF 75-ohm Coaxial Cable
Design
and
1, Speaker cable
x
specifications
are
subject
to
x
5, Scart cable
change
x
1, Remote control
unpublished
"DTS" and "DTS
Digital
works.
Out"
are
1, Batteries (AAA)
Dolby Laboratories. "Dolby" and the double-D symbol are trademarks
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
trademarks of
Digital
x
2
without notice.
Manufactured under license from
Confidential
x
Theater
Systems,
of
Dolby
Laboratories.
Inc.
47
P/N: 3828R-D036D
Download PDF