LG | V-5000D | LG V-5000D Owner’s Manual

Vacuum Cleaner
OWNER'S MANUAL
MODEL : V-5060CT (Hose-Button Control, Booster, Telescopic Pipe)
V-5000CT (Hose-Button Control, Telescopic Pipe)
V-5000CD (Hose-Button Control, 2-Steel Pipes)
V-5000HT/V-5004HT (Hose-Slide Control, Telescopic Pipe)
V-5000HD (Hose-Slide Control, 2-Steel pipes)
V-5000T (Body Slide Control, Telescopic Pipe)
V-5000D (Body Slide Control, 2-Steel pipes)
V-5010T
V-5010D
(Body-On/Off, Telescopic Pipe)
(Body-On/Off, 2-Steel Pipes)
Please read carefully and thoroughly the operating instructions and
safety precautions before installing and operating your vacuum
cleaner.
Solvent
Red mark
Yellow mark
Dust Indicator
Floor
1
2
-2-
CAUTION
Take
when setting the
dust bag.
care
Flexible Hose
V-5060CT
Button Switch
Control Cover
V-5000CT
V-5060CT
V-5000CD
V-5000CT
V-5000CD
V-5000HT
V-5000T
V-5004HT
Slide Switch
V-5000D
V-5000HD
V-5000HT
Air
V-5004HT
Adjustment
V-5000HD
V-5010T
V-5010D
V-5000T
V-5000D
Extension
Cord rewind button
V-5010T
pipes
Control Cover
V-5010D
Telescopic Pipe
(V-5060CT)
(V-5000CT)
(V-5000HT)
(V-5004HT)
(V-5000T)
(V-5010T)
Steel Pipe
(V-5000CD)
(V-5000HD)
(V-5000D)
(V-5010D)
Plug
Body
Switch
button
Dust indicator
(ON/OFF)
Suction inlet
Castor
Latch
ACCESSORIES
Nozzle
Accessory
holder
Upholstery
-3-
nozzle
Crevice tool
Dusting
brush
IMPORTANT SAFEGUARDS
a
using an electrical appliance, basic safety
precautions should always be followed, to reduce
the risk of fire, electric shock and injury to persons,
including the following:
17Take electrical
and its coat is
USING THIS APPLIANCE
20Do not
Disconnect power supply before servicing and/or
the unit. If not, electric shock could occur
1 Do not leave
the outlet when not in
2 Do not
pick
use or
outdoors
use
Unplug
it from
before
3Do not handle
or
as a
tion is necessary when used
toy. Close
by
1Connecting
handle
tion.
cord is
damaged,
by the manufacturer or
larly qualified person in
7Do not
sharp
its service
agent
order to avoid
a
replaced
simi-
or a
hazard.
the cord away from heated
unplug by pulling the
plug, not the cord.
cord. To
1)
unplug,
pick
that is
or
up flammable
liquid or vapors such as gasoline
where they may exist.
13Do not
to
pick
use vacuum
fiters in the
2)
the HOSE.
pull
15Do not
keep
16The cord
or use
in
v/cleaner
on
rapidly
pull
Pulling
problems
When
pipes
plug
out of the
the cord
and
past
cleaning
is
cleaner and
the red mark.
the red mark may
cause
rewinding system.
completed, unplug
5Press the ON/OFF switch
unplugging.
rewinding.
beyond
with the cord
vacuum
(fig.4)
cord from
socket outlet and press the cord reel button. The
cord will be automatically rewound.
(
). (fig.5)
extinguish slowly when press
off position. (V-5060CT, V-
Power indicator will
the chairs, tables, etc.
cleaning stairs.
when
clamp
2 Pieces STEEL PIPES
Do not
switch button in
must be taken when
moves
the hose
Adjustment.
insert into the socket outlet.
areas
bag
depress
out.
TELESCOPIC EXTENSION PIPES
4Pull the main
smok-
combustible
cleaner without dust
turn off all controls before
care
or
a
(V-5000D,V-5010D,
V-5000CD,V-5000HD,)
Insert the STEEL PIPES firmly each other. (fig.1)
right place.
14Always
Extra
remove
the cord out
use
of the v/cleaner until
Push the slider control downwards to extend
ashes.
12Do not
body
sound is heard.
or/ retract extension
anything
burning
cigarettes, matches, or fireplace
up
as
or
(V-5000CT, V-5000HT, V-5004HT, V-5010T,
V-5000T,V-5060CT) (fig. 3)
Keep hair, loose clothing, fingers, and all parts of
body away from the openings. Do not use vacuum cleaner(v/cleaner) to pick up sharp hard
objects, small toys, pins, etc.
such
the
(fig. 2)
3EXTENSION PIPES
put any object into openings. Do not use
with any openings blocked; keep free of dust. lint,
hair, and anything that may reduce air flow.
ing,
on
the nozzle, the extension pipes and the
narrow section into the wide sec-
button and
9Do not
11Do not
to rest
(fig.1)
To
grasp the
10
heavy objects
insert the
clicking
surfaces.
8Do not
or
Insert the HOSE into
or
Keep
:
2HOSE Connection.
a
the cord.
over
it must be
carry by the power cord as a handoor on cord, or pull the cord around
edges or corners. Do not run appliance
pull
dle, close
sharp
USING THE VACUUM CLEANER
atten-
children
manufacturer's recommended attach-
supply
or
use of radio transmitting devices close to the
appliance may interfere the function of the appliance, input power may vary.
ments.
6If the
solvent in toxic
dry cleaning
with wet hands.
appliance
4Do not allow it to be used
only
mark.
cause
wet material.
or
plug
for
22The
wet surfaces. Do not
or on
jobs expected
power cord. If the power cord is damaged
frayed, it may cause a fire or electric shock.
.
up the water
5Use
in.
use
21Do not allow
start.
appliance plugged
for those
flammable. It may result in the surface damage.
Wipe off the dirty place with a clean cloth.
cleaning
suddenly
only
cleaner.
vacuum
pull out the cord beyond the red
Pulling the cord out past the red mark may
problems with the cord reel.
WARNING
servicing
home
19Do not
READ ALL INSTRUCTIONS BEFORE
and/or cleaner could
plug when rewinding
plug to whip when
when hose is cracked
inspection
peeled off.
18Use this v/cleaner
a
or
and hold the
path
rewinding.
When
ASSEMBLING
clear
onto cord reel. Do not allow the
5000CT/CD)
Provide
-4-
the power
6Adjusting
9DUST INDICATOR
1) V-5060CT, V-5000CT, V-5000CD (fig. 6)
GREEN
power with the power control switch in
the handle.
Adjust
Automatic
RED
cleaning mode, this
optimal cleaning is required
appliance sensing the floor condition and
nozzle
mode is used when
by
the
amount of dust
BOOSTER
dirt which is
in
deep-embedded
a
or on
automatically.
CAUTION:
(V-5060CT)
MIN
can't
This mode is used for
cleaning at night, or
cleaning required. (V-5000CT/CD)
MAX : This mode is used for cleaning carpets or
similar items which require strong suction force.
OFF : Used to stop appliance operation.
:
power with the
sliding
Open
3. Remove the moisture.
switch in the
in shade for about
1.
2.
excessive pressure,
mark
(fig
(fig.5)
Accessories
The crevice tool
Store
the
on
the
:
Micro and
cleaner in
Position
a
cool, clean, and dry
:
Push the nozzle holder into
on
the bottom of the v/cleaner.
on
the
rear
of the
v/cleaner.(fig.20)
BEFORE REQUESTING SERVICE
be stored at the tool box in
Proper assembly and safe use of your vacuum cleaner
your personal responsibilities. Read this "Owner's
Manual" carefully for important use and safety
are
DUSTING BRUSH: For
on
or
in the
narrow
gentle vacuuming
information.
gap.
of
Repairs, when necessary, must be performed at an
authorized service facilities. This appliance is intended
a
the furniture, curtain etc.
UPHOLSTERY NOZZLE: For
the
vacuum
the holder slot
be stored in the holder with
radiator, between the shelves,
on
Micro Filter
Horizontal Position: Push the nozzle holder into
be attached
CREVICE TOOL: For the dust between the ribs of the
dust
arrow
(fig.19)
appliance
delicate fabrics
keeping
High Efficiency pleated
the holder slot
22.
can
with the
clean EXHAUST FILTER.
it.
using clamping hook.(fig. 21)
can
types, like fig
sufficiently
Filter.)
place.
Upright
8HOW TO USE THE ATTACHMENTS
two
or
13HOW TO STORE THE VACUUM CLEANER
pressure. If the suction
power weakened, raise the front end slightly. (fig.10)
Extention wands
on
18-¥L:
Carbon
the floor. Do not exert
can
the filter
V-5004HT, V-5000HD, fig 18-¥M
particularly parquet
by applying only light
Holder
a warm
dish-washer
V-5060CT, V-5000CT, V-5000CD, V-5000HT,
obtained
Accessory
Dry
day.
3. Insert the EXHAUST FILTER
this may damage the flooring,
floors. Best results will be
as
a
a
Open the exhaust cover. (fig 17)
Replace the old EXHAUST FILTER
new one or
7HOW TO USE NOZZLE
over
(fig. 16)
12 THE EXHAUST FILTER REPLACEMENT
reduced.(fig 8)
lightly
PHILIPS.
by
soapy water. Do not clean in
in a washing machine.
the air hole in the handle, then suction
Pass the nozzle
genuine LG dust bag. If you
only 'HR6938-OSH' of paper bag
use
use
1. Pull out the MOTOR SAFETY FILTER
V-5010D
power will be
Always
2. Shake the dust off and wash filter in
3) V-5000T,V-5000D (fig.8,9)
Adjust power with the sliding switch in the body.
(fig.9)
Open the hole in the handle, then suction power
will be reduced.(fig 8)
Press the on/off switch to ON.
bag
cleaner off
11THE MOTOR SAFETY FILTER CLEANING
handle.
4) V-5010T,
than 10cm from the floor.
vacuum
get it,
made
is
2) V-5000HT,V-5000HD,V-5004HT (fig.7)
Adjust
bag is full
detaching the
(fig. 5), remove the
by pressing the knob and open the cover by
pressing the latch. (fig. 12)
1) Paper filter bag
Dispose of the bag and set the new one.
2) Cloth filter bag
After sliding the clip off or unzipping the cloth
filter bag, empty the cloth filter bag. (fig. 15)
any bulky obstacles, Power in this mode is
much higher than MAX mode power.
BOOSTER operates for 10seconds and is
when silent
Filter
hose
the floor, and also recommended when the
hose, the pipes, of the nozzle is clogged with
restored to the last mode
use.
bag.
the dust filter
Switch the
removing
carpet
more
10Replacing
present.
This mode is suitable for
:
the filter
Watch the dust indicator after
The normal
:
Empty
:
(fig. 11)
Continue to
:
vacuuming
for HOUSEHOLD USE ONLY and not for commercial
of the
or
upholstery.
-5-
industrial
use.
SAVE THESE INSTRUCTIONS
The serial number is found
number is
unique
You should record
this
guide
Date of
Dealer
as a
the bottom of this unit. This
on
to this unit and not available to others.
requested
information here and retain
permanent record of your purchase.
purchase
purchased
from
Dealer address
Dealer
phone
No.
Model No.
Serial No.
TROUBLE SHOOTING CHART
Review this chart to find
do-it-yourself
solutions for minor
performance problems.
WARNING
:Disconnect power supply before servicing and/or cleaning the unit
electrical shock could occur and/or the cleaner could suddenly start.
Possible Cause
Problem
Cleaner won't
1.
run.
Unplugged
at wall outlet.
2. Power control S/W is in
"OFF"
1. Full
Poor suction.
2.
position.
clogged filter bag.
Clogged clean filter.
or
Possible solution
1.
Plug
in
firmly.
2. Push switch button.
3.
Regulate power
1.
Change the filter bag.
Change the clean filter.
Replace hose.
2.
3.
4.
5. Clean the air passage of
nozzle.
Clogged
nozzle.
cover
open.
5. Close filter
picks
movable
rugs or nozzle
hard.
pushes
control switch.
3. Hole in hose.
5. Filter
Cleaner
as
1. Suction too
strong.
too
-6-
1.
cover.
Regulate power
control lever.
P/No.: 3828Fi3698A
Made in KOREA
Download PDF

advertising