LG | LMEN126HVT | LG LMAN097HVT.EMBAEUS Owner’s Manual

ENGLISH
FRANCAIS
ESPAÑOL
OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : WALL MOUNTED
www.lg.com
P/NO : MFL67449203
Multi-Type Air Conditioner Owner’s Manual
TABLE OF CONTENTS
A. Safety Precautions ..........................................3
B. Electrical Safety ...............................................6
Temporary Use of an Adapter............................6
Symbols used in this Manual .............................6
C. Product Introduction .......................................7
Indoor Units........................................................7
Outdoor Unit.......................................................7
D. Operating Instructions ....................................8
How to insert the Batteries .................................8
Wireless Remote Controller Maintenance..........8
Operating Method ..............................................8
Wireless Remote Controller ...............................9
Operation Mode ...............................................10
Healthy Dehumidification Operation.................11
Air Circulation Operation ..................................11
Auto Operation.................................................11
PLASMA Purification Operation (Optional) ......11
Jet Cool/Heat Operation...................................12
Energy-Saving Cooling Mode ..........................12
Display Luminosity ...........................................12
Sleep Mode Operation (Optional) ....................12
Auto Clean(Optional)........................................13
Setting the Current Time ..................................13
Timer Setting....................................................13
To cancel the Timer Setting .............................13
Forced operation..............................................14
Auto Restart Function ......................................14
Horizontal Vane Control...................................15
Vertical Louver Control ....................................15
E. Maintenance and Service ..............................16
Indoor Unit........................................................16
Outdoor Unit.....................................................17
Operation Tips!.................................................17
Self-Diagnosis Function ...................................17
Troubleshooting Tips! Save time and money!..18
Call the service immediately in the following
situations ..........................................................18
2 Multi Air Conditioner
FOR YOUR RECORDS
Write the model and serial numbers here:
Model #
Serial #
You can find them on a label on the side of each unit.
Dealer's Name
Date Purchased
■ Staple your receipt to this page in the event you need
it to prove date of purchase or for warranty issues.
READ THIS MANUAL
Inside you will find many helpful hints on how to use
and maintain your air conditioner properly. Just a little
preventive care on your part can save you a great deal
of time and money over the life of your air conditioner.
You'll find many answers to common problems in the
chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips first, you may not need to call
for service at all.
PRECAUTION
• Contact the authorized service technician for
repair or maintenance of this unit.
• Contact the installer for installation of this unit.
• The air conditioner is not intended for use by
young children or invalids without supervision.
• Young children should be supervised to ensure
that they do not play with the air conditioner.
• When the power cord is to be replaced,
replacement work shall be performed by
authorized personnel only using only genuine
replacement parts.
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions must be followed.
■ Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by
the following indications.
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage.
■ Meanings of symbols used in this manual are as shown below.
Be sure not to do.
Be sure to follow the instruction.
Always use a power plug and socket with
a ground terminal.
• There is a risk of electric shock.
For electrical work, contact the dealer, seller,
a qualified electrician, or an Authorized
Service Center. Do not disassemble or repair
the product by yourself.
• There is risk of fire or electric shock.
Use the correctly rated breaker or fuse.
• There is risk of fire or electric shock.
Do not install the product on a defective
installation stand. Be sure that the
installation area does not deteriorate with
age.
• It may cause product to fall.
Do not use a defective or underrated
circuit breaker. Use the correctly rated
breaker and fuse.
• There is risk of fire or electric shock .
Always ground the product as per the
wiring diagram. Do not connect the
ground wire to gas or water pipes
lightening rod or telephone ground wire.
• There is risk of fire or electric shock.
Do not modify or extend the power cable.
If the power cable or cord has scrathes or
skin peeled off or deteriorated then it
must be replaced.
• There is risk of fire or electric shock.
Never install the outdoor unit on a
moving base or a place from where it
can fall down.
• The falling outdoor unit can cause damage or
injury or even death of a person.
In outdoor unit the step-up capacitor
supplies high voltage electricity to the
electrical components. Be sure to
discharge the capacitor completely
before conducting the repair work.
When installing the unit, use the
installation kit provided with the product.
• An charged capacitor can cause electrical
shock.
• Otherwise the unit may fall and cause severe
injury.
Do not use a multi consent. Always use
this appliance on a dedicated cicuit and
breaker.
• Otherwise it can cause electric shock or fire.
Install the panel and the cover of control
box securely.
• There is risk of fire or electric shock due to
dust , water etc.
For installation, removal or reinstall ,
always contact the dealer or an
Authorized Service Center.
• There is risk of fire, electric shock, explosion,
or injury.
When the product is soaked (flooded or
submerged) in water , contact an
Authorized Service Center for repair
before using it again.
• There is risk of fire or eletric shock.
Be sure to use only those parts which
are listed in the svc parts list. Never
attempt to modify the equipment.
• The use of inappropriate parts can cause an
electrical shock, excessive heat generation or fire.
Owner's Manual 3
ENGLISH
Safety Precautions
Safety Precautions
Indoor/outdoor wiring connections must
be secured tightly and the cable should
be routed properly so that there is no
force pulling the cable from the
connection terminals.
Safely dispose off the packing materials.
Like screws, nails, batteries, broken
things etc after installation or svc and
then tear away and thraw away the plastic
packaging bags.
• Improper or loose connections can cause
heat generation or fire.
• Children may play with them and cause
injury.
Be sure to check the refrigerant to the
used. Please read the label on the product.
Don't use a power cord, a plug or a loose
socket which is damaged.
• Incorrect refrigerant used can prevent the
normal operation of the unit.
• Otherwise it may cause a fire or electrical
shock.
Do not place a heater or other heating
appliances near the power cable.
Do not allow water to run into electric
parts. Install the unit away from water
sources.
• There is risk of fire and electric shock.
Do not use the product in a tightly closed
space for a long time. Perform ventilation
regularly.
• There is risk of fire, failure of the product, or
electric shock.
Do not open the front grille of the product
during operation. (Do not touch the
electrostatic filter, if the unit is so equipped.)
Make sure to check that the power cable
plug is not dirty, loose or broken and
then only insert the plug completely.
• Dirty, loose or broken power plug can cause
electric shock or fire.
Do not touch , operate, or repair the
product with wet hands. Hold the plug by
hand when taking out
• There is risk of electric shock or fire.
Do not store or use or even allow
flammable gas or combustibles near the
product.
• There is risk of fire.
If strange sounds, smell or smoke comes
from product.Immediately turn the breaker
off or disconnect the power supply cable.
• Oxygen deficiency could occur and hence
harm your health.
• There is risk of physical injury, electric shock,
or product failure.
• There is risk of electric shock or fire.
Ventilate the product room from time to
time when operating it together with a
stove, or heating element etc.
Turn the main power off and unplug the
unit when cleaning or repairing the
product.
When the product is not to be used for a
long time, disconnect the power supply
plug or turn off the breaker.
• Oxygen deficiency can occur and hence harm
your health.
Take care to ensure that nobody
especially kids could step on or fall onto
the outdoor unit.
• This could result in personal injury and
product damage.
• There is risk of electric shock.
Take care to ensure that power cable
could not be pulled out or damaged
during operation.
• There is risk of fire or electric shock.
Do not plug or unplug the power supply plug to turn the unit
ON/OFF .
• There is risk of fire or electric shock.
Two or more people must lift and
transport the product.
• Avoid personal injury.
Keep level even when installing the
product.
• To avoid vibration or noise.
4 Multi Air Conditioner
• There is risk of product damage or failure, or
unintended operation.
Do not place ANYTHING on the power
cable.
• There is risk of fire or electric shock.
When flammable gas leaks, turn off the gas and open a window
for ventilation before turn the product on.
• Do not use the telephone or turn switches on or off. There is risk of
explosion or fire.
Do not install the product where it will be
exposed to sea wind (salt spray) directly.
• It may cause corrosion on the product.
Do not install the product where the noise
or hot air from the outdoor unit could
damage or disturb the neighborhoods.
• It may cause a problem for your neighbors
and hence dispute.
Install the drain hose to ensure that the
condensed water is drained away properly.
• A bad connection may cause water leakage.
Always check for gas (refrigerant)
leakage after installation or repair of
product.
• Low refrigerant levels may cause failure of
product.
Safety Precautions
• There is risk of damage or loss of property.
Do not touch the metal parts of the
product when removing the air filter.
• There is risk of personal injury.
Do not insert hands or other objects
through the air inlet or outlet while the
product is operating.
• There are sharp and moving parts that could
cause personal injury.
Do not tilt the unit when removing or
uninstalling it.
• The condensed water inside can spill .
Dismantling the unit, treatment of the
refrigerant oil and eventual parts should
be done in accordance with local and
national standards.
Do not block the inlet or outlet of air flow.
• It may cause product failure.
Do not step on or put anyting on the
product. (outdoor units)
• There is risk of personal injury and failure of
product.
Be cautious when unpacking and
installing the product.
• Sharp edges could cause injury.
Do not mix air or gas other than the
specified refrigerant used in the system .
Use a soft cloth to clean. Do not use
harsh detergents, solvents or splashing
water etc .
• There is risk of fire, electric shock, or damage
to the plastic parts of the product.
Always insert the filter securely after
cleaning. Clean the filter every two weeks
or more often if necessary.
• A dirty filter reduces the efficiency.
If the refrigerant gas leaks during the
repair, do not touch the leakaing
refrigerant gas.
• The refrigernat gas can cause frostbite (cold
burn)
If the refrigerant gas leaks during the
installation, ventilate the area immediately.
• If air enters the refrigerant system, an
excessively high pressure results, causing
equipment damage or injury.
• Otherwise it can be harmfull for your health.
Replace the all batteries in the remote
control with new ones of the same type.
Do not mix old and new batteries or
different types of batteries.
Do not recharge or disassemble the
batteries. Do not dispose off batteries in
a fire.
• There is risk of fire or product failure.
• They may burn or explode.
If the liquid from the batteries gets onto
your skin or clothes, wash it well with
clean water. Do not use the remote if the
batteries have leaked.
If you eat the liquid from the batteries,
brush your teeth and see doctor. Do not
use the remote if the batteries have
leaked.
Do not let the air conditioner run for a
long time when the humidity is very high
and a door or a window is left open.
• The chemicals in batteries could cause burns
or other health hazards.
• The chemicals in batteries could cause burns
or other health hazards.
• Moisture may condense and wet or damage
furniture.
Do not expose your skin or kids or
plants to the cool or hot air draft.
• This could harm to your health.
Do not drink the water drained from the
product.
• It is not sanitary and could cause serious
health issues.
Use a firm stool or ladder when cleaning,
maintaining or repairing the product at
an height.
• Be careful and avoid personal injury.
Owner's Manual 5
ENGLISH
Do not use the product for special purposes,
such as preserving foods, works of art, etc. It
is a consumer air conditioner, not a precision
refrigeration system.
Electrical Safety
Electrical Safety
• This appliance must be properly grounded.
To minimize the risk of electric shock, you must alway plug into a grounded oulet.
• Do not cut or remove the grounding prong from the power plug.
• Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance
unless the cover screw is metal and not insulated, and the wall receptacle is grounded through the
house wiring.
• If you have any doubt whether the air conditioner is properly grounded, have the wall receptacle and
circuit checked by a qualified electrician.
Temporary Use of an Adapter
We strongly discourage the use of an adapter due to potential safety hazards. For temporary connections,
use only a genuine adapter, available from most local hardware stores. Ensure that the large slot in the
adapter is aligned with the large slot in the receptacle for a proper polarity connection.
To disconnect the power cord from the adapter, use one hand on each to avoid damaging the ground
terminal. Avoid frequently unplugging the power cord as this can lead to eventual ground terminal damage.
• Never use the appliance with a broken adapter.
Symbols used in this Manual
This symbol alerts you to the risk of electric shock.
This symbol alerts you to hazards that may cause harm to the
air conditioner.
NOTE
This symbol indicates special notes.
6 Multi Air Conditioner
Product Introduction
Here is a brief introduction of the indoor and outdoor units. Please see the information specific to your
indoor unit type.
Indoor Units
[Artcool Libero Type]
[Standard Libero Type]
Air inlet
Plasma filter
Air filter
Air inlet
Plasma filter
Air filter
ON/OFF button
Front grille
On/ Off button
Front grille
Signal receiver
Operation lamp
Operation lamp
Signal Receiver
Air outlet
Horizontal Vane
Horizontal vane
Air outlet
Vertical louver
Vertical Louver
Air inlet
ON/OFF button
Air filter
Front grille
Operation lamp
Signal Receiver
Horizontal vane
Air outlet
Vertical louver
Outdoor Unit
Air intake vents
Control cover
Connecting wire
Connection pipe
Drain hose
Air outlet vents
Base plate
❈ The figure can be changed according to model.
Owner's Manual 7
ENGLISH
Product Introduction
Operating Instructions
Operating Instructions
How to insert the Batteries
1. Remove the battery cover by pulling it according to the arrow
direction.
2. Insert new batteries making sure that the (+) and (-) of battery are
installed correctly.(Battery Size = AAA (1.5 volt))
3. Reattach the cover by sliding it back into position.
NOTE
1. Always use/replace both batteries of same type.
2. If the system is not to be used for a long time, remove the
batteries to save their working life.
3. If the display screen of remote controller starts, fading replace
both of the batteries.
Wireless Remote Controller Maintenance
1. Choose a suitable place where its safe & easy
to reach.
2. Fix the holder to wall etc with the supplied
screws firmly.
3. Slide the remote controller inside the holder.
NOTE
1. Remote controller should never be exposed to
direct sunlight.
2. Signal transmitter & receiver should always be
clean for proper communication. Use a soft
cloth to clean them.
3. In case some other appliances also get
operated with remote control, change their
position or consult your serviceman.
Operating Method
1. The signal receiver is inside the unit.
2. Aim the remote controller towards the unit to operate it. There should not be any
blockage in between.
8 Multi Air Conditioner
Operating Instructions
ENGLISH
Wireless Remote Controller
Display
screen
Control
panel
Control
panel
Display
screen
a
F
Plasma button*: Purifies the air by
removing particles that enter the
indoor unit.
l
=
Sleep mode auto button*: Sets the
sleep mode auto operation.
e
y
Temperature adjustment buttons:
Adjusts the room temperature when
cooling and heating.
d
-
g
f
h
i j
Auto Operation
k
Dehumidification mode
Heating Mode
On/Off button: Turns the power
on/off.
fan speed button: Adjusts
7 v Indoor
the fan speed.
Operation mode selection button*:
A C Selects the operation mode.
Cooling operation (A) / Auto
D B operation or auto changeover (C) /
E
Dehumidifying operation (D) / Heating
operation (B) / Air circulation (E)
N
Operation Mode
Cooling Mode
Description
Jet cooling/heating button*: Warms
up or cools down the indoor
temperature within a short period of
time.
Air flow direction button: Adjusts
H I the air flow direction vertically or
horizontally.
Temperature display button: Displays
the room temperature. Also changes
S unit from °C to °F if pressed for 5
seconds.
m n z
Timer button: Sets the current time
and the start / end time.
Fan Mode
• Cooling Model(
), Heat Pump Model(
)
c
b
u
Navigation and functions button*:
Adjusts the time and sets the special
functions.
J G J: Auto clean / G: Operates energy
saving cooling / LIGHT : Adjusts the
brightness of the indoor unit display
p
-
Set/clear button: Sets or cancels
functions.
r
-
Reset button: Resets the air
conditioner settings.
NOTE
❈ Some functions may not be supported, depending on the model.
Owner's Manual 9
Operating Instructions
Operation Mode
1
2
Press the ON/OFF BUTTON to turn the unit on.
The unit will respond with a beep.
Open the door of the remote controller and press the operation mode button. Each time the button
is pressed, the operation mode is shifted in the direction of the arrow.
Cooling
3
4
Auto Operation
Dehumidifying
Operation
Heating
For cooling or heating operation set the desired indoor
temperature by pressing the ROOM TEMPERATURE SETTING
BUTTONS.
For cooling the temperature can be set within
18°C~30°C(64°F~86°F) and for heating the temperature range is
16°C~30°C(60°F~86°F).
Air Circulation
To raise the temperature
To lower the temperature
Set the fan speed with the remote controller. You can select the fan speed by pressing the
INDOOR FAN SPEED SELECTOR BUTTON.
Each time the button is pressed, the fan speed mode is shifted.
Natural Wind
Step1(Low)
Step2(Medium-Low)
Step3(Medium)
Step4(Medium-High)
Step5(High)
Natural wind
❏ For fresher feeling, press the INDOOR FAN SPEED SELECTION BUTTON and set to Natural wind mode.
In this mode, the wind blows like a natural breeze by automatically changing fan speed.
10 Multi Air Conditioner
Operating Instructions
During Healthy Dehumidification Operation
❏ If you select the dehumidification mode on the OPERATION MODE SELECTION BUTTON, the product starts to run
the dehumidification function. It automatically sets the room temperature and airflow volume to the best condition for
dehumidification, based on the sensed current room temperature.
In this case, however, the setting temperature is not displayed on the remote controller and you are not able to control
the room temperature either.
❏ During the healthy dehumidification function, the airflow volume is automatically set according to the optimization
algorithm responding to the current room temperature status, so that the room condition is kept healthy and
comfortable even in the very humid season.
Air Circulation Operation
This operation circulates the air without cooling or heating. It can be activated by pressing the OPERATION
MODE SELECTION BUTTON. Once the air circulation is activated you can select the air speed by pressing
the INDOOR FAN SPEED SELECTOR BUTTON.
NOTE
: During this opertion, 'Cooling' lamp lights up. (Standard Libero Type)
Auto Operation
In this operation mode, the system is automatically operated by the electronic controls.
- You can set the desired temperature between 18°C(64°F) and 30°C(86°F) for Auto Operation mode.
NOTE
This function properly operates when you use the remote controller matching each model.
PLASMA Purification Operation (Optional)
Plasma filter is a technology developed by LG to get rid of
microscopic contaminants in the intake air by generating a plasma of
high charge electrons. This plasma kills and destroys the
contaminants completely to provide clean and hygienic air.
Plasma purification can be started by pressing the PLASMA BUTTON on the remote controller.
F is displayed on the display screen. Repressing it will deactivate the operation.
NOTE
This feature can be used in any operation mode and any fan speed can be used while plasma filter is
functioning.
Owner's Manual 11
ENGLISH
Healthy Dehumidification Operation
Operating Instructions
Jet Cool/Heat Operation
Jet cool function can be used to cool the room quickly in hot summer. When this
function is turned on, the air conditioner runs in cooling operation mode with super high
fan speed and 18°C(64°F) setting temperature for 30 minutes for fast and effective
cooling.
Similarly, jet heat function (available only in some models) warms up the room quickly by
operating at super high fan speed and 30°C(86°F) setting temperature for 30 minutes.
You can activate this operation by pressing the JET COOL BUTTON.
To change from jet cool mode to high fan speed cooling mode, press the JET COOL
BUTTON or INIDOOR FAN SPEED SELECTOR BUTTON or the ROOM TERPERATURE
SETTING BUTTON again.
NOTE
• Jet Cool/Heat operation cannot be activated during Air Circulation operation and auto operation.
Energy-Saving Cooling Mode
Energy-saving cooling mode can save energy in cooling operation, because it can operate efficiently by
setting body-adaptation time according to the change of time and temperature and adjusting desired
temperature automatically.
1. Press the ON/OFF BUTTON to start the unit.
2. Open the cover of the remote controller.
Select cooling operation.
3. Press the ENERGY-SAVING COOLING MODE BUTTON.
4. To cancel the energy-saving cooling mode, press the ENERGY-SAVING
COOLING MODE BUTTON again and unit will operate in previous
mode(Cooling mode).
Display Luminosity
The Display Luminosity can be adjusted by using the remote control.
Press the LCD/LED LUMINOSITY button.
Display will be dark. Press the button again to set bright display.
Sleep Mode Operation (Optional)
Press the SLEEP MODE AUTO BUTTON to set the time when you want the unit to stop
automatically. The timer is programmed in one-hour increments by pressing the
SLEEP MODE AUTO BUTTON 1 to 7 times. The sleep mode is available for 1 to 7 hours.
NOTE
• The sleep mode will operate indoor fan at super low speed in cooling mode and at low speed in heating
mode for pleasant sleep.
12 Multi Air Conditioner
Operating Instructions
❏ During auto clean function, moistures left in indoor units after cooling operation or healthy dehumidification
operation can be removed.
This function operate when the unit is turned off.
• Press the Auto Clean button.
•
c
is displayed on the display screen.
If the Auto Clean function is reserved, whenever the unit is turned off, the indoor fan is
still running for about 30 minutes internally without cooling or dehumidification
operation. Also the louver is closed.
This dries up any remains of moisture & cleans the unit internally.
Setting the Current Time
1. Press the Set/Clear button for 3seconds. p
- The AM/PM icon flickers at the bottom of the display screen.
2. Press Time Setting buttons until the desired time is set. o q
3. Press the Set/Clear button. p
NOTE
Check the indicator for A.M. and P.M.
Timer Setting
1. Press ON or OFF button. m
n
2. Press Time Setting buttons until the desired time is set. o
q
3. Press the Set/Clear button. p
To cancel the Timer Setting
• If you wish to cancel all timer setting, press the SET/CLEAR button.
• In order to cancel the timer settings individually, press the Timer button to select Reserved 'On' or
Reserved 'Off'. And then press the Set/Clear button aiming the remote controller at the signal receiver.
(the timer lamp on the display will go off)
Owner's Manual 13
ENGLISH
Auto Clean(Optional)
Operating Instructions
Forced operation
Forced operation is used when the remote controller can't be used. The operation will be started if the ON/OFF
button is pressed. If you want to stop the operation, re-press the button.
ON/OFF button
Heat pump Model
Room Temp. ≥ 24°C(75.2°F)
21°C(69.8°F) ≤ Room Temp. < 24°C(75.2°F)
Room Temp. < 21°C(69.8°F)
Operating mode
Cooling
Healthy Dehumidification
Heating
Indoor FAN Speed
High
High
High
Setting Temperature
22°C(71.6°F)
23°C(73.4°F)
24°C(75.2°F)
Test operation
During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room temperature
and resets in 18 minutes. During test operation, if remote controller signal is received, the unit operates as remote controller
sets. If you want to use this operation, Press and hold the ON/OFF button for 3-5 seconds, then the buzzer sound 1
'beep'. If you want to stop the operation, re-press the button.
Auto Restart Function
This function is useful in the situation of power failure.
When power regains after a failure this feature restore the previous operating condition
and the air conditioner will run in the same settings.
NOTE
This feature is enabled by factory default setting, but you can disable it by pressing the ON/OFF button for 6
seconds. The unit will beep twice and the lamp will blink 8 times.
To enable it, press the button again for 6 seconds. The unit will beep twice and the blue lamp will blink 4 times.
14 Multi Air Conditioner
Operating Instructions
ENGLISH
Horizontal Vane Control
The Horizontal Vane can be adjusted by using the remote controller.
1. Press the ON/OFF BUTTON to start the unit.
2. Press the vertical airflow direction button.
Each time the button is pressed, the air-flow
direction is changed in the direction of the arrow.
STOP
1 Step
2 Step
3 Step
4 Step
5 Step
6 Step
Auto Swing
※ Press the Vertical Airflow Direction button once more during Auto Swing at the direction of airflow you want.
Vertical Louver Control
The Vertical Louvers can be adjusted by using the remote controller.
1. Press the ON/OFF BUTTON to start the unit.
2. Press the horizontal airflow direction button. Each time the button is pressed, the
airflow direction is changed in the direction of the arrow.
1 Step
2 Step
3 Step
4 Step
5 Step Left Auto Swing Right Auto Swing
STOP
Full Auto Swing
※ Press the Horizontal Airflow Direction button once more during Full Auto Swing at the direction of airflow you want.
NOTE
• Manually moving the Horizontal Vane or Vertical Louvers by hand could damage the mechanism.When the
unit is shut off, the the Horizontal Vane and Vertical Louvers will close the air outlet vent of the product.
• Air Conditioner memorizes the last operated angle.
So there is possibility of difference in the angle of Remote Controller and the unit after reoperation.
In that case, angle can be adjusted by pressing the Vane Control Button on the Remote Controller.
• The vertical louvers may automatically move for a specific temperature zone at the cooling mode.
ex) 1 Step → 2 Step, 5 Step → 4 Step
Owner's Manual 15
Maintenance and Service
Maintenance and Service
Before performing any maintenance, turn off the main power to the system, disconnect the circuit breaker and
unplug the power cord.
Indoor Unit
Clean the unit with a soft dry cloth. Do not use bleach or abrasives.
P o wd
Never use any of these
• Water hotter than 40°C(104°F). It may cause deformation and discoloration.
• Volatile substances. They may damage the surface of the air conditioner.
er
G a s o li n e
Cleaning the air filter
Cleaning the plasma filter
Clean the air filter once every 2 weeks or
more if necessary.
1. Turn off the power and unplug the power
cord.
2. Open the front cover.
- Lift up both sides of the cover slightly.
1. Turn off the power and unplug the power
cord.
2. Open the front cover and remove the air
filter (see “Cleaning air filter”).
3. Remove the plasma filter in 10 seconds.
3. Hold the knob of the air filter, lift it up slightly
and remove it from the unit.
4. Use a vacuum cleaner to remove any dirt.
- If dirt is difficult to remove, wash the filter
with lukewarm water.
5. Dry the filter in the shade.
NOTE
4. Clean the filter with a vacuum cleaner or
with warm water.
- If dirt is difficult to remove, wash the filter
in lukewarm water with detergent.
5. Dry the filter in the shade.
16 Multi Air Conditioner
• The location of the filters may differ,
depending on the model.
• The plasma filter may not be included in some
models.
Maintenance and Service
The heat exchanger coils and panel vents of the outdoor unit should be checked regularly.
If clogged with dirt or soot, the heat exchanger
and panel vents may be professionally steam cleaned.
NOTE
Dirty or clogged coils will reduce the operating efficiency of the system and cause higher operating costs.
Operation Tips!
Do not overcool the room.
Keep blinds or curtains
closed.
This is not good for the health and
wastes electricity.
Make sure that the
doors and windows
are shut thight.
Avoid opening doors and
windows as much as
possible to keep the cool
air in the room.
Do not let direct sunshine enter
the room when the air conditioner
is in operation.
Clean the air filter
regularly.
Blockages in the air filter
reduce the airflow and
lower cooling and
dehumidifying effects.
Clean at least once every
two weeks.
Keep the room temperature
uniform.
Adjust the vertical and horizontal
airflow direction to ensure a
uniform temperature in the room.
Ventilate the room
occasionally.
Since windows are kept
closed, it is a good idea
to open them and
ventilate the room now
and ten.
Use high fan speed
for effective and fast
cooling.
The unit gives its rated
cooling capacity when the
fan speed is high.
Self-Diagnosis Function
This unit has an inbuilt error diagnosis capability. Unit LED will blink in case if thermistor fails.
Please contact your serviceman/dealer in such a situation
Error Display LED
(once)
2 sec
2 sec
2 sec
Owner's Manual 17
ENGLISH
Outdoor Unit
Maintenance and Service
Troubleshooting Tips! Save time and money!
The air conditioner may be operating abnormally when:
Problem
Air
conditioner
does not start
Air
conditioner
does not cool
as it should
Possible Causes
What To Do
■ The air conditioner is
unplugged.
• Make sure the air conditioner plug is
pushed completely into the outlet.
■ The fuse is blown/circuit
breaker is tripped.
• Check the house fuse/circuit breaker box
and replace the fuse or reset the breaker.
■ Power failure.
• If power failure occurs, turn the mode
control to OFF.
When power is restored, wait 3 minutes to
restart the air conditioner to prevent
tripping of the compressor overload.
■ High or low voltage.
• If the voltage is unusually very high or low
the circuit Breaker will trip.
■ Airflow is restricted.
• Make sure there are no curtains, blinds, or
furniture blocking the front of the air
conditioner.
■ The air filter is dirty.
• Clean the filter at least every 2 weeks.
See the Maintenance and Service section.
■ The room may have been hot.
• When the air conditioner is first turned on,
you need to allow time for the room to cool
down.
■ Cold air is escaping.
• Check for open furnace floor registers and
cold air returns.
■ Check the temperature settings.
• Make sure they are correct.
■ There might be any heating
source in the room.
• Check and remove such source or turn it
off while using the air conditioner.
Call the service immediately in the following situations
1. Anything abnormal such as burning smell, loud noise etc. happen. Stop the unit and
turn the breaker off. Never try to repair by yourself or restart the system in such cases.
2. Main power cord is too hot or damaged.
3. Error code is generated by self diagnosis.
4. Water leaks from indoor unit even if the humidity is low.
5. Any switch, breaker (safety, earth) or fuse fails to work properly
User must carry routine checkup & cleaning to avoid unit’s poor performance.
In case of special situation, the job must be carried out by service person only.
18 Multi Air Conditioner
LG Customer Information Center
888-865-3026 USA, press #2 for PTAC, TTW
888-865-3026 USA, press #3 for DFS, Multi V
1-888-LG-Canada CANADA
Register your product Online!
LGEUS
LG Electronics, Air conditioning Division
1000 Sylvan Ave., Englewood Cliffs, NJ 07632
www.lg.com
LGECI
LG ELECTRONICS CANADA INC.
20 NORELCO DRIVE.
NORTH YORK, ONTARIO M9L 2X6.
US
CANADA
1. Please call the installing contractor of your product, as warranty service will be provided by them.
2. If you have service issues that have not been addressed by the contractor, please call 1-888-865-3026.
Service call Number # : (888) LG Canada, (888) 542-2623
Download PDF

advertising