OWNER’S MANUAL
Wireless
Sound Bar
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
LAS454B (LAS454B, S55A3-D)
www.lg.com
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance. The Power Plug is the disconnecting
device. In case of an emergency, the Power Plug must
remain readily accessible
Getting Started
This device is equipped with a portable battery or
accumulator.
IMPORTANT SAFETY
INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10.Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11.Only use attachments/accessories specified by
the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or
when unused for long periods of time.
14.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
1
Getting Started
Safety way to remove the battery from the
equipment: Remove the old battery or battery pack,
follow the steps in reverse order than the assembly.
To prevent contamination of the environment and
bring on possible threat to human and animal health,
the old battery or the battery put it in the appropriate
container at designated collection points. Do not
dispose of batteries or battery together with other
waste. It is recommended that you use local, free
reimbursement systems batteries and accumulators.
The battery should not be exposed to excessive heat
such as sunshine, fire or the like.
3
4
Getting Started
Industry Canada Statement
1
Getting Started
This device complies with Industry Canada’s licenceexempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference,
including interference that may cause
undesired operation of the device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated
with minimum distance 20 cm (7.8 inches)
between the antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD
VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
WARNING
[For product having the wireless function using 5
GHz frequency bands]
(i) the device for operation in the band 5150–
5250 MHz is only for indoor use to reduce
the potential for harmful interference to cochannel mobile satellite systems;
(ii) for devices with detachable antenna(s), the
maximum antenna gain permitted for devices
in the bands 5250-5350 MHz and 54705725 MHz shall be such that the equipment
still complies with the e.i.r.p. limit;
(iii) for devices with detachable antenna(s), the
maximum antenna gain permitted for devices
in the band 5725-5850 MHz shall be such
that the equipment still complies with the
e.i.r.p. limits specified for point-to-point and
non-point-to-point operation as appropriate;
and
(iv) the worst-case tilt angle(s) necessary to
remain compliant with the e.i.r.p. elevation
mask requirement set forth in Section 6.2.2(3)
shall be clearly indicated.(devices operating in
the band 5250-5350 MHz with a maximum
e.i.r.p. greater than 200 mW)
(v) High-power radars are allocated as primary
users (i.e. priority users) of the bands 5250–
5350 MHz and 5650–5850 MHz and that
these radars could cause interference and/or
damage to LE-LAN devices.
Table of Contents
5
Table of Contents
1
Getting Started
2
Safety Information
6
Unique features
6Introduction
6
– Symbols used in this manual
6Accessories
7
Remote control
8
Front panel
8
Rear panel
9
Installing the sound bar
10 Mounting the main unit on a wall
2Connecting
12
13
13
14
14
14
Wireless subwoofer connection
Connecting to your TV
– Using an OPTICAL cable
Optional equipment connection
OPTICAL IN connection
– PORTABLE IN connection
3Operating
15Operations
15 – DRC (Dynamic Range Control)
15 – Turn off the sound temporarily
15 – Using your TV remote control
16 – AUTO POWER On/Off
16 – Auto function change
17 Using BLUETOOTH® technology
17 – Listening to music stored on the
BLUETOOTH devices
18 Sound adjustment
18 – Setting sound effect
18 – Adjust the woofer level settings
1
2
3
4
4Troubleshooting
19Troubleshooting
20 NOTES to use wireless
5
5Appendix
21 Trademarks and licenses
22Specifications
23Maintenance
23 – Handling the unit
6
Getting Started
Unique features
1
Auto power down
Getting Started
This unit will turn off by itself for energy saving
consumption.
Accessories
Please check and identify the supplied accessories.
Designs and specifications of the accessories are
subject to change without prior notice.
Portable In
Listen to music from your portable device. (MP3
player, Notebook, Smart phone, etc..)
Remote control (1)
Batteries (2)
Wall Bracket Install
guide (1)
Wall bracket (1)
Introduction
Symbols used in this manual
,,Note
Indicates special notes and operating features.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
Optical cable (1)
Getting Started
Remote control
7
• • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Power): Switches the unit ON or OFF.
F : Changes input sources.
STANDARD : Selects STANDARD sound effect
CINEMA : Selects CINEMA sound effect
(Mute) : Mutes the sound.
VOL o/p : Adjusts speaker volume.
• • • • • • • • • • • • • • b• • • • • • • • • • • • • •
DRC ON/OFF : Turns on or off DRC function.
(Refer to the page 15.)
WOOFER LEVEL o/p : Adjusts sound level of
subwoofer.
AUTO POWER ON/OFF: Turns on or off AUTO
POWER function. (Refer to the page 16.)
Replacement of battery
Remove the battery cover on the rear of the Remote
Control, and insert two R03 (size AAA) batteries
with and matched correctly.
1
Getting Started
VOICE : Selects VOICE sound effect
8
Getting Started
Front panel
A
1
Getting Started
G
B
C
D E F
A 1/! (Standby/On)
B F (Function)
Selects the function and input source.
C p/o (Volume)
Adjusts volume level.
D Standby LED
It lights up in red on standby mode.
E Remote sensor
G
F Function LED
,,Note
yy You can check current function through
the LED.
yy This unit turns off LED If there is no key
input for 20 seconds. To display LED, press
any button.
yy Standby LED quickly blinks when you
press any button, and slowly blinks in
Mute or Minimum volume status.
yy Bluetooth LED blinks when you select
Bluetooth function. if you connect
Bluetooth device, LED will turn on.
G Speakers
Rear panel
A
B
A PORT. IN : Portable input
B OPTICAL IN : Optical input
Getting Started
9
Installing the sound bar
You can hear the sound by connecting the unit to the
other device : TV, Blu-ray disc player, DVD player, etc.
>>Caution
yy For best performance of wireless connection
such as Bluetooth or wireless subwoofer,
do not install the unit on Metallic furniture
because wireless connection communicates
through a module positioned on the bottom
of the unit.
yy Be careful not to make scratches on the
surface of the Unit /Sub-Woofer when
installing or moving them.
1
Getting Started
Place the unit in front of the TV and connect it to the
device you want. (Refer to pages 13 - 14.)
10 Getting Started
Mounting the main unit
on a wall
1
1. Match the TV’s BOTTOM EDGE of Wall bracket
install guide with the bottom of TV and attach to
the position.
You can mount the main unit on a wall.
Getting Started
>>Caution
Because it is difficult to make a connection after
installing this unit, you should connect the cables
before installation.
2. When you mount it on a wall (concrete), use the
wall plugs (Not supplied). You should drill some
holes. A guide sheet (Wall Bracket Install guide) is
supplied to drill. Use the sheet to check the point
to drill.
Prepare screws and brackets.
Unit
Wall bracket install
guide
Wall bracket
,,Note
Screws and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting.
3. Remove the Wall bracket install guide.
Getting Started 11
4. Fix it with screws (not supplied) as shown in the
illustration below.
5. Hang the main unit onto the bracket as shown
below.
1
Getting Started
>>Caution
yy Do not install this unit upside down. It can
damage the parts of this unit or be the cause
of personal injury.
yy Do not hang onto the installed unit and avoid
any impact to the unit.
yy Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
result in an injury or damage to the product.
yy When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
,,Note
Detach the unit from the bracket as shown
below.
12 Connecting
Wireless subwoofer
connection
3. If the LED of the wireless subwoofer already
blinks in yellow-green continually, you can skip
this step.
Press and hold PAIRING on the back of the
wireless subwoofer for more than 5 seconds.
LED indicator of wireless subwoofer
2
Connecting
LED Color
Status
Yellow-green
(Blink)
The connection is trying.
Yellow-green
The connection is completed.
Red
The wireless subwoofer is in
standby mode or the connection
is failed.
Off
(No display)
The power cord of wireless
subwoofer is disconnected.
Setting up the wireless subwoofer for
the first time
1. Connect the power cord of the wireless
subwoofer to the outlet.
2. Turn on the main unit : The main unit and wireless
subwoofer will be automatically connected.
Manually pairing wireless subwoofer
When your connection is not completed, you can see
the red LED or the blinking of yellow-green LED on
the wireless subwoofer and the subwoofer does not
make sound. To solve the problem, follow the below
steps.
1. Adjust volume level of the main unit to minimum
by pressing VOL p button repeatedly until
standby LED on the main unit blinks slowly.
2. Press and hold
(Mute) on the remote control
for about 3 seconds.
-- The standby LED on the main unit blinks quickly.
-- The LED of the wireless subwoofer lights up
alternately in red and yellow-green.
4. Disconnect the power cord of the main unit and
the wireless subwoofer.
5. Connect them again after the LED of the main
unit and the wireless subwoofer is fully turned
off.
The main unit and the wireless subwoofer will be
paired automatically when you turn on the main
unit.
-- When the connection is completed, you can see
the yellow-green LED on the subwoofer.
,,Note
yy It takes a few seconds (and may take longer)
for the main unit and the subwoofer to
communicate with each other and make
sounds.
yy The closer the main unit and the subwoofer,
the better sound quality. It is recommended
to install the main unit and the subwoofer as
close as possible and avoid the cases below.
-- There is a obstacle between the main unit
and the subwoofer.
-- There is a device using same frequency
with this wireless connection such as
a medical equipment, a microwave or a
wireless LAN device.
Connecting 13
Connecting to your TV
Please connect with this unit and TV using the optical
digital cable or HDMI cable considering the state of
the TV.
Using an OPTICAL cable
yy You can enjoy the TV audio through the
speakers of this unit. In the case of some TV
models, you must select the external speaker
option from the TV menu. (For details,
reference your TV user manual.)
yy Set up the sound output of TV to listen to
the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (Optical)]
yy Details of TV setting menu vary depending
on the manufacturers or models of your TV.
Optical
cable
2. Set the input source to OPTICAL. Press F button
repeatedly until the function is selected.
2
Connecting
1. Connect the OPT. IN jack on the back of the unit
to OPTICAL OUT jack on the TV using an OPTICAL
cable.
,,Note
yy Before connecting the optical cable, be sure
to remove the protection plug cover if your
cable has the cover.
14 Connecting
Optional equipment
connection
PORTABLE IN connection
OPTICAL IN connection
Connect an optical output jack of external devices to
the OPTICAL IN jack.
2
Connecting
MP3 player, etc...
To the optical output
jack of external
device
1. Connect the OPTICAL IN jack on the back of
the unit to optical out jack of your TV (or digital
device etc.)
2. Select the input source to OPTICAL by pressing F
button repeatedly until the function is selected.
3. Listen to sound.
4.Press F to exit from OPTICAL.
,,Note
Before connecting the optical cable, be sure to
remove the protection plug cover if your cable
has the cover.
Listening to music from your portable
player
The unit can be used to play the music from many
types of portable players or external devices.
1. Connect the portable player to the
PORTABLE IN connector of the unit by using 3.5
mm stereo cable.
2. Turn the power on by pressing 1 (Power).
3. Select the PORTABLE function by pressing F
button repeatedly until the function is selected.
4. Turn on the portable player or external device and
start playing it.
Operating 15
Operations
Auto power down
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down and prevent sudden increase of sound (Dolby
Digital only). This function turns on or off you press
DRC ON/OFF.
Turn off the sound temporarily
Press
(Mute) to mute your unit.
To cancel it, press (Mute) again on the remote
control or change the volume level.
You can control some functions of this unit by your
TV remote control even by other company’s product.
Controllable functions are volume up/down and
mute.
Press and hold DRC ON on the remote control for
about 3 seconds.
To turn off this function, press and hold DRC OFF
about 3 seconds.
,,Note
yy Supported TV brands
LG
Panasonic
Philips
Samsung
Sharp
Sony
Toshiba
Vizio
yy Make sure that the sound output of your TV
is set to [External speaker].
yy Depending on the remote control, this
function may not work well.
So does this unit after six hours since Main unit has
been connected to other device using analogue input.
(Ex : Portable, etc..)
How to disconnect the wireless
network connection or the wireless
device
Set up the AUTO POWER ON/OFF function to off
and turn off the unit.
3
Operating
Using your TV remote control
This unit will be off itself to save electric consumption
in the case main unit is not connected to external
device and is not used for 20 minutes.
16 Operating
AUTO POWER On/Off
Auto function change
This unit automatically turns on by an input source :
Optical or Bluetooth.
This unit recognizes input signals such as optical
and Bluetooth. And then changes suitable function
automatically.
When you turn on your TV or an external device
connected to this unit, this unit recognizes the input
signal and select the suitable function. You can hear
the sound from your device.
If you try to connect your Bluetooth device, this
unit turns on and the unit will be connected your
Bluetooth device.
This function turns on or off each time you press
AUTO POWER.
3
,,Note
Operating
yy After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the external device.
yy If you turned off the unit directly, it cannot
be turned on automatically by AUTO POWER
function. However the unit can be turned on
by AUTO POWER function when optical signal
comes in after 5 seconds of no signal.
yy Depending on the connected device, this
function may not operate.
yy If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turn off the unit.
yy When you turn on this unit for the first time,
Auto Power function is turned on status.
yy To use this function, the main unit must be
registered in paired devices list of Bluetooth
device.
When optical signal comes in
When you turn on the external device connected
to this unit by an optical cable, this unit change the
function to optical. You can hear the sound from your
device.
When you try to connect BLUETOOTH
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
,,Note
To change to optical function, it needs 5 seconds
of no signal.
Operating 17
Using BLUETOOTH®
technology
About BLUETOOTH
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
interfered by the other electronic wave or you
connect the Bluetooth in the other rooms.
Available Devices : Mobile phone, MP3, Laptop, PDA
etc.
BLUETOOTH Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.This
unit is compatible with following profile.
yy A2DP (Advanced Audio Distribution Profile)
yy Codec : SBC
Pairing your unit and BLUETOOTH
device
Before you start the pairing procedure, make sure the
Bluetooth feature is turned on in to your Bluetooth
device. Refer to your Bluetooth device’s user guide.
Once a pairing operation is performed, it does not
need to be performed again.
1. Turn on the unit.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device display
depending on the type of Bluetooth device. Your
unit appears as
“LG LAS454B (XX)”.
,,Note
yy XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see
“LG LAS454B (08)” on your Bluetooth
device.
yy Depending on the Bluetooth device type,
some device have a different pairing way.
Enter the PIN code (0000) as needed.
3. When this unit is successfully connected with
your Bluetooth device, BLUETOOTH (j) LED will
turned on.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
3
Operating
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
Listening to music stored on the
BLUETOOTH devices
18 Operating
,,Note
3
Operating
yy When using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance.
However it may not work well in the case
below :
-- There is a obstacle between the unit and
the Bluetooth device.
-- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
yy You should connect your Bluetooth device to
this unit again when you restart it.
yy The sound may be interrupted when the
connection interfered by the other electronic
wave.
yy You may not control the Bluetooth device
with this unit.
yy Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yy Depending on the type of the device, you may
not be able to use the Bluetooth function.
yy You can enjoy Bluetooth function using Smart
phone, MP3 player, Notebook, etc..
yy The more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
yy Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets far from the unit.
yy When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
yy When not connected the Bluetooth,
Bluetooth LED will blink.
Sound adjustment
Setting sound effect
This system has a number of pre-set surround sound
fields. You can select a desired sound mode by using
each sound mode button.
Button
Description
STANDARD
You can enjoy optimized sound.
CINEMA
You can enjoy more immersive
and cinematic surround sound.
VOICE
This program make voice sound
clear, improving the quality of
voice sound.
,,Note
yy In some of sound effect mode, some speakers,
there’s no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.
yy You may need to reset the sound effect
mode, after switching the input, sometimes
even after the sound file changed.
Adjust the woofer level settings
You can adjust the sound level of woofer by pressing
WOOFER LEVEL o/p button.
Troubleshooting 19
Troubleshooting
PROBLEM
CAUSE & CORRECTION
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn it on again.
The unit does not
work properly.
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
No Power
yy The power cord is unplugged.
Plug in the power cord.
yy Check the condition by operating other electronic devices.
yy Incorrect input source is selected.
Check the input source and select the correct input source.
No sound
yy The mute function is activated.
Press (Mute) or adjust the volume level to cancel the mute function.
No woofer sound
yy The power cord of the subwoofer is not connected.
Plug the power cord into the wall outlet securely.
yy Pairing between the unit and the subwoofer gets disconnected.
Connect the unit and the subwoofer. (Refer to the page 12.)
yy The remote control is too far from the unit.
Operate the remote control within about 7 m.
The remote control
does not work
properly.
yy There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
The AUTO POWER
function does not
work.
yy Check connection of the external device such as TV, DVD/Blu-Ray player or
Bluetooth device.
yy The batteries in the remote control is exhausted.
Replace the batteries with new one.
yy Depending on the connected device, this function may not operate.
4
Troubleshooting
yy When you are using connection with a external device (set top box, Bluetooth
device etc.), adjust volume level of the device.
20 Troubleshooting
PROBLEM
CAUSE & CORRECTION
Check the details below and adjust the unit according to them.
When you feel the
output sound of the
unit is low.
yy Switch [ON] state of DRC function to [OFF] by using remote controller.
yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on
TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
yy With the sound bar connected with Player, change the AUDIO DIGITAL OUT
setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
yy Change Audio DRC setting on Player setup menu to [OFF] state.
NOTES to use wireless
PROBLEM
4
This device may have
wireless interference.
CAUSE & CORRECTION
yy Wireless may not operate normally in weak signal area.
yy Please install the device close enough to wireless subwoofer.
yy Do not install the device on metal furniture for optimum performance.
Troubleshooting
yy When any part of your body contact the transceiver of the Bluetooth device or
sound bar.
yy When there is an obstacle or wall or the device is installed in a secluded spot.
Bluetooth device may yy When there is a device(a wireless LAN, a medical equipment or a microwave) using
same frequency, make the distance between the products as far away as possible
malfunction or make
each other.
noise in the following
cases.
yy When to connecting the device to the Bluetooth device, make the distance
between the products as close as possible each other.
yy When the device gets too far from the Bluetooth device, the connection is
disconnected and also malfunction may occur.
Appendix 21
Trademarks and licenses
All other trademarks are trademarks of their
respective owners.
Bluetooth wireless technology is a system which
allows radio contact between electronic.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
5
Appendix
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
Digital Surround is a trademark of DTS, Inc. © DTS,
Inc. All Rights Reserved.
22 Appendix
Specifications
General
Power requirements
Refer to the main label on the unit.
Refer to the main label on the unit.
Power consumption
Networked standby : 0.5 W
(If all network ports are activated.)
Dimensions (W x H x D)
Approx. 950 mm x 71 mm x 47 mm (37.4 inch x 2.8 inch x 1.9 inch)
Net Weight
Approx. 2.47 kg (5.4 lb)
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 90 %
Inputs
Digital audio in (OPTICAL IN)
3 V (p-p), Optical jack x 1
Portable in (PORT. IN)
0.5 Vrms (3.5 mm stereo jack) x 1
Available Digital Input Audio
Sampling Frequency
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Available Digital Input Audio format Dolby Digital, DTS Digital Surround, PCM
Amplifier (RMS Output power)
5
Appendix
Total
300 W
Front
50 W x 2 (4 Ω at 1 kHz, THD 10%)
Subwoofer
200 W (6 Ω at 80 Hz, THD 10%)
Wireless subwoofer
Power requirements
Refer to the main label on the unit.
Power consumption
Refer to the main label on the unit.
Type
1 Way 1 Speaker
Impedance
3Ω
Rated Input Power
200 W
Max. Input Power
400 W
Dimensions (W x H x D)
Approx. 171 mm X 390 mm X 261mm
(6.7 inch x 15.3 inch x 10.2 inch)
Net Weight
Approx. 5.6 kg (12.3 lb)
yy Designs and specifications are subject to change without prior notice.
Appendix 23
Maintenance
Handling the unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide spray
near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
5
Appendix
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
LG Customer Information Center
1-888-542-2623
CANADA
Register your product Online!
www.lg.com
Download PDF

advertising