LG | LAS453B | LG LAS453B Owner's manual

ENGLISH
SIMPLE MANUAL
Wireless
Sound Bar
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
MODEL
LAS453B
*MFL69506642*
www.lg.com
Front Panel
1
Subwoofer Connection
Place the wireless subwoofer near the sound bar and
follow steps below.
a Connect the power cord of wireless
subwoofer to the outlet.
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Power On /Off
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Selects Function
· · · · · · · · · · · · · · · · · · · · · · · · · · Adjusts Volume
Rear Panel
b Turn on the sound bar :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's yellow - green LED turns on.
Subwoofer Connection Manually
a Reset the Subwoofer
If the yellow - green LED on the subwoofer
blinks quickly, skip this step and go to b
yy Press and hold PAIRING button for 5 seconds.
yy The LED lights up alternately in red and
yellow - green.
yy Plug out the power cord. After the LED turns
off completely, plug in the power cord again.
PORT.IN · · · · · · · · · · · · · · Connect to a Portable device
OPTICAL IN · · · · · · · · · · · Connect to an Optical device
When the reset is completed, the subwoofer's
yellow - green LED blinks quickly.
b Reset the sound bar
yy Adjust volume to minimum until the red LED on
the sound bar lights up for a while.
yy Press and hold (Mute) button on the remote
control for 3 seconds.
yy The red LED on the sound bar blinks quickly.
yy Turn the sound bar’s power off and on while the
subwoofer’s yellow - green LED blinks.
When the connection is completed, you can see the
yellow - green LED on the subwoofer.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1m to prevent wireless
interference.
!P
2
TV Connection
Remote control
Connect with the Sound Bar and TV using Optical.
a Connect the sound bar to the TV using
Optical cable.
b Set up [External Speaker (Optical)] on
your TV setting menu.
TV
STANDARD/VOICE/CINEMA: Selects sound effect.
DRC ON/OFF: Make comfortable sound at Dolby Digital.
WOOFER LEVEL +/-: Adjusts the volume level of
subwoofer.
Addtional Device Connection
a Connect to the external device as follows.
AUTO POWER ON/OFF: Automatically turns on by an
input source.
Replacement of battery
(Set-top
Box, Player
etc.)
TV
Additional Information
Specification
b Set the input source by pressing F on the
remote control or unit repeatedly.
Power requirements
Refer to the main label.
Refer to the main label.
Power
consumption
Dimensions
(W x H x D)
Net Weight (Approx.)
Amplifier (Total RMS
Output power)
Networked standby : 0.5 W
(If all network ports are
activated.)
Approx.
950 mm x 71 mm x 47 mm
(37.4 inch x 2.8 inch x 1.9
inch)
Approx. 2.47 kg (5.4 lb)
200 W
Design and specifications are subject to change without
notice.
How to disconnect the wireless network
connection or the wireless device
Set up the AUTO POWER ON/OFF function to off and turn
off the unit.
Industry Canada Statement
WARNING
This device complies with Industry Canada’s licenceexempt RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
[For product having the wireless function using 5 GHz
frequency bands]
(i) the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite
systems;
(ii) for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the
bands 5250-5350 MHz and 5470-5725 MHz shall
be such that the equipment still complies with the
e.i.r.p. limit;
(iii) for devices with detachable antenna(s), the maximum
antenna gain permitted for devices in the band
5725-5850 MHz shall be such that the equipment
still complies with the e.i.r.p. limits specified for
point-to-point and non-point-to-point operation as
appropriate; and
(iv) the worst-case tilt angle(s) necessary to remain
compliant with the e.i.r.p. elevation mask requirement
set forth in Section 6.2.2(3) shall be clearly indicated.
(devices operating in the band 5250-5350 MHz
with a maximum e.i.r.p. greater than 200 mW)
(v) High-power radars are allocated as primary users (i.e.
priority users) of the bands 5250–5350 MHz and
5650–5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment.
This equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
LG Customer Information Center
Centre d’information à la clientèle de LG
1-888-542-2623
CANADA
Register your product Online!
Enregistrez votre produit en ligne!
www.lg.com
Download PDF