LG | HT503SH | LG HT503SH Owner’s Manual

HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 1
Model: HT503SH(HT503SH-AH, SH53SH-S/C/W)
Full HD up-scaling
(1080p)
Unique Features
5.1ch ez Set-up
View Full HD picture quality
with simple setup.
Listen sound from TV, DVD
and Digital Device with vivid
5.1ch mode.
Go to page 10
Go to page 15
USB Direct Recording Portable In
Record music from CD to
your USB device.
Listen to music from your
portable device (MP3,
Notebook, etc).
Go to page 17
Go to page 17
P/NO : MFL57006553
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 2
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or
similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from over heating. The openings should be
never be blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instruction has been
adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain it for future reference. Should the
unit require maintenance, contact an authorized service center.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases, should be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
2
That is, a single outlet circuit which powers only that appliance and has no additional
outlets or branch circuits. Check the specification page of this owner's manual to be
certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with
an exact replacement part by an authorized service center.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 3
Welcome to your new DVD Receiver
Contents
Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
OSD Initial language settings . . . . . . . . . . . . . . . . . . .9
Initial Setting the Area Code . . . . . . . . . . . . . . . . . . . .9
Adjust the settings . . . . . . . . . . . . . . . . . . . . . . . . .9-11
Setting the sound mode . . . . . . . . . . . . . . . . . . . . . .11
What is SIMPLINK?
Some functions of this unit are controlled by TV’s remote control when this unit and
LG TV with SIMPLINK are connected through HDMI connection.
• Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop,
Power Off, etc.
• Refer to the TV owner’s manual for the details of SIMPLINK function.
• LG TV with SIMPLINK function has the logo as shown above.
• Use a higher version cable than 1.2A HDMI cable.
Displaying Disc Information . . . . . . . . . . . . . . . . . . .12
Playing a disc or file . . . . . . . . . . . . . . . . . . . . . .12-14
Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . .14
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . .15
5.1ch ez Set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Listening to music from your USB device . . . . . . . . .16
Recording music from CD to your USB device . . . . .17
Listening to music from your portable player . . . . . . .17
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . .20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
3
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 4
Setting up
Attaching the speakers to the DVD receiver
a
You will have received six speaker cables.
Each one is colour-coded by a band near each end and connects one of
the six speakers to the DVD receiver.
b
Connect the wires to the DVD receiver.
Match each wire’s coloured band to the same coloured connection terminal on the rear of the DVD receiver. To connect the cable to the DVD
receiver, press each plastic finger pad to open the connection terminal.
Insert the wire and release the finger pad.
COLOUR
SPEAKER
POSITION
Grey
Rear
Behind you and to your right.
Blue
Rear
Behind you and to your left.
Green
Centre
Above screen, directly in front of you.
Orange
Sub Woofer
Red
Front
White
Front
In front of you, to the right of
the screen.
In front of you, to the left of
the screen.
To connect the cable to the speakers, press each plastic finger pad to open the
connection terminals on the base of each speaker. Insert the wire and release
the finger pad.
Be careful of the following
Connect the red end of each wire to the
terminals marked +(plus) and the black
end to the terminals marked - (minus).
c
Connect the wires to the speakers.
Connect the other end of each wire to the correct speaker according to
the colour coding:
4
Be careful to make sure children do not put their hands or any objects into the
*speaker duct.
*Speaker duct: A hall for plentiful bass sound on speaker cabinet(enclosure).
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 5
Hooking up the unit
a Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.
Audio In connection
Video Out connection
Connect the VIDEO OUTPUT (MONITOR) jack on the
unit to the corresponding
input jack on your TV using a
Video cable.
The unit’s Audio jacks are
colour coded (red for right
audio and white for left
audio). If your TV has only
one input for audio (mono),
connect it to the left (white)
audio jack on the unit.
AM/FM connection
AM - Connect the AM loop
aerial to the DVD receiver.
FM - Connect the FM aerial.
The reception will be its best
when the two loose ends of
the aerial are in a straight and
horizontal line.
Component Video connection
Connect the COMPONENT
VIDEO (PROGRESSIVE
SCAN) OUTPUT jacks on
the unit to the corresponding
input jacks on your TV using
a Y PB PR cable.
b Plug the power cord into the power source.
5
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 6
Hooking up the unit
Hooking up the unit - more you
can do
HDMI Out connection
Connect the HDMI OUTPUT jack
on the unit to the HDMI input jack
on a HDMI compatible TV using a
HDMI cable.
Resolution Setting
You can change the resolution for component video
and HDMI output.
To change the resolution using setup menu to select
the desired resolution - Auto, 480i(576i), 480p(576p),
720p, 1080i, 1080p.
Available resolution according to connection
[HDMI OUT]: Auto, 1080p, 1080i, 720p and 480p (or
576p)
[COMPONENT VIDEO OUT]: 480p (or 576p) and 480i
(or 576i)
[VIDEO OUT]: 480i (or 576i)
Notes on HDMI Out connection
• If your TV does not accept your resolution setting,
abnormal picture appears on the screen.
Please read owner’s manual for TV, and then set
the resolution that your TV can accept.
• Use the HDMI cable within 5 meters
• If the volume bar is not displayed on TV screen,
when you select Simplink to off on TV, restart the
unit.
Enjoying audio from an external source
You can enjoy audio from an external source through
your unit.
Press INPUT repeatedly to select the desired input
source. - AUX, AUX OPT, PORTABLE, USB
Digital Audio in connection
Connect the unit’s OPTICAL
IN jack to the optical out to
jack on your TV (or Digital
Devicae etc.)
6
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 7
Remote control
a POWER: Switches the unit ON or OFF.
FUNCTION : Selects the function (DVD/CD, FM, AM)
a
b
c
INPUT : Changes the input source ( AUX, AUX OPT,
PORTABLE, USB)
SLEEP : Sets the System to turn off automatically at a
specified time. (Dimmer : Dims the LED (Light-emitting
diode) of front panel by half in power-on status.)
MUTE : Press MUTE to mute your unit. You can mute your
unit in order, for example, to answer the telephone.
EQ : You can choose 6 (or 7) fixed sound impressions.
VSM : Press VSM to set the Dolby Pro Logic II or VIRTUAL sound.
RETURN (O): Press to move back wards in the menu.
0-9 numerical buttons: Selects numbered options in a
menu.
b SETUP : Accesses or removes setup menu
MENU : Accesses the menu on a DVD disc.
DISPLAY: Accesses On-Screen Display.
TITLE : If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu may
appear.
b / B / v / V (left/right/up/down):Used to navigate onscreen displays.
ENTER : Acknowledges menu selection.
VOLUME (+/-) : Adjusts speaker volume.
c CLEAR: Removes a track number on the Program List.
S-TITLE: During playback, S - TITLE repeatedly to select a
desired subtitle language .
REPEAT: Repeats a Chapter/ Track/ Title/ all.
HT SPK: Press HT SPK to select the AUX OPT directly
d TV Control buttons : Controls the TV. (LG TV only)
Put the batteries into the remote control
Make sure that the + (plus) and – (minus) on the batteries match those on the remote control.
Controlling the TV.
You can control the sound level, input source, and
power switch of LG TVs as well. Hold POWER (TV) and
press CHANNEL (v/V) button repeatedly until the TV on
or off.
PRESET(-/+): Selects programme of Radio.
TUN.(-/+): Tunes in the desired radio station.
PLAY (B): Starts playback. Mono/Stereo(St.)
STOP (x): Stops playback or recording.
PAUSE/STEP (X): Pause playback
REC (z) : USB RECORD
SCAN(bb/BB) : Search backward or forward.
d
. / >): Go to next or previous chapter/ track.
SKIP(.
PROG./MEMO. : Accesses or removes Program menu.
7
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 8
Main Unit
Open/Close
DVD/CD Disc Drawer
PORT. IN port
The PORT. In port means you can connect
an audio device to play trough the surround
sound speakers.
USB port
The USB port allows you can connect a
memory device to your DVD player.
Power
Turn the unit on and off.
Play/Pause, Function
Press and hold down this button for
about 3 seconds then press repeatedly to select other function.
Stop
Tuning (-/+)
Skip / Search
VSM
Selects the Dolby Pro Logic II
or Virtual sound.
Volume
Control the volume when using any function.
8
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 9
Adjust the settings
OSD Initial language settings
Before using the unit for the first time, you have to adjust OSD initial
language
ON REMOTE
1 Turn the power on:
Appear the language list display window
POWER
2 Select the language:
vV b B
3 Press:
ENTER
4 To confirm press:
b B and ENTER
ON REMOTE
1 Display setup menu :
SETUP
2 Select a desired option on the first level:
vV
3 Move to second level:
B
4 Select a desired option on the second level:
vV
5 Move to third level:
B
6 Change the setting:
v V, ENTER
Adjust the settings - more you can do
Initial Setting the Area Code
Adjust the language settings
After factory setting, To set the Area code you have to as below.
ON REMOTE
1 Display setup menu:
SETUP
2 Select LOCK menu on the first level:
vV
3 Move to second level:
Appears the activated Area code on the
second level.:
B
4 Move to third level:
B
5 Enter the new password:
numerical buttons
(0-9) and ENTER
6 Recheck entered new password:
numerical buttons
(0-9) and ENTER
7 Select a code for a geographic area:
After select, Rating and Passward will be
activated.(page18)
vV b B
8 To confirm press:
ENTER
OSD – Select a language for the Setup menu and on-screen display.
There is displayed as “-” or other error mark on display when you
change OSD.
- Restart the unit
- Change function
- Disconnect and connect USB device.
Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list in
the reference chapter (see page 18). If you make a mistake before pressing
ENTER, press CLEAR.
[OFF] (for Disc Subtitle): Turn off Subtitle.
9
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 10
Adjust the display settings
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen.
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
Video Resolution - Use vV to select the desired resolution then press ENTER
to confirm your selection.
You can set 1080p video resolution to enjoy Full HD picture quality.
(Full HD up-scaling)
The number in 480p (or 576p), 720p, 1080p and 1080i indicates the number of
lines of video. The “i” and “p” indicate interlaced and progressive scan, respectively.
[Auto] If your HDMI jack is connected to TVs providing display information
(EDID), automatically selects the resolution best suited to the connected TV
(1080p, 1080i, 720p or 480p (or 576p)). (only for HDMI connection)
[1080p] Outputs 1080 lines of progressive video. (only for HDMI connection)
[1080i] Outputs 1080 lines of interlaced video.(only for HDMI connection)
[720p] Outputs 720 lines of progressive video.(only for HDMI connection)
[480p (or 576p)] Outputs 480 (or 576) lines of progressive video.
[480i (or 576i)] Outputs 480 (or 576) lines of interlaced video.
Notes on Video Resolution
• Only resolutions supported by the TV are available.
• Depending on your TV, certain HDMI output resolutions may not work.
• If your TV does not accept your resolution setting, an abnormal picture
appears on the screen. Please read TV’s owner’s manual then set the resolution that your TV can accept.
• If the HDMI jack is connected for TVs providing display information (EDID),
you can not select resolutions that the TV does not accept.
• If the picture does not appear on the screen, change the TV’s input source.
10
• If you turn off the TV or disconnect the HDMI cable during playback of the
device, playback will pause. You have to click on the play button to play back
again. For some TVs, when you change the TV mode, such condition specified above may happen.
Adjust the audio settings
5.1 Speaker Setup - Adjust 5.1 Speaker Setup menu for amplifier’s output.
[Speaker]: Select a speaker that you want to adjust.
[Size]: Since the speaker settings are fixed, you cannot change the settings.
[Volume]: Adjust the output level of the selected speaker. (-5dB ~ 5dB)
[Distance]: If you connected speakers to your DVD/CD Receiver, setting the
Distance lets the speakers know how far the sound has to travel to reach
your set listening point. This allows the sound from each speaker to reach
the listener at the same time.
Press b / B to adjust the Distance of the selected speaker. (You can’t adjust
front / Woofer speakers)
[Test]: Press b / B to test the signals of each speaker. Adjust the volume to
match the volume of test signals memorized in the system.
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo. This function is
effective for multi-channel karaoke DVDs only.
HD AV Sync - Sometimes Digital TV encounters a delay between picture and
sound. If this happens you can compensate by setting a delay on the sound so
that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use vV
to scroll up and down through the delay amount, which you can set at anything
between 0 and 300m sec.
The delay will vary depending on which digital TV channel you are on. If you
change channel you may need to readjust the HD AV Sync.
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 11
Adjust the lock settings
To access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so. Enter a 4-digit password.
Enter it again to verify. If you make a mistake while entering number, press
CLEAR to delete numbers.
If you forget your password you can reset it. Press SETUP to display the Setup
menu. Input ‘210499’ and press ENTER. The password has now been cleared.
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New]: Enter a new 4-digit password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change]: Enter the new password twice after entering the current password.
Area code – Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. See the Area Codes on page 18.
Adjust the others settings
PBC (Playback Control) – Playback control provides special navigation features that are available on disc. Select [On] to use this feature.
DivX(R) Registration – We provide you with the DivX® VOD (Video On
Demand) registration code that allows you to rent and purchase videos using
the DivX® VOD service.
For more information, visit www.divx.com/vod.
Press ENTER when [Select] icon is highlighted and you can view the registration code of the unit.
Bit Rate – You can set the quality of the recorded file.
Setting the sound mode
VSM (VIRTUAL SOUND MATRIX) and Dolby Pro Logic II
You can select the Dolby Pro Logic II or Virtual sound. Press VSM to set the virtual sound or to change sound mode repeatedly.
[BYPASS] mode : Software with multichannel surround audio signals is played
according to the way it was recorded.
2Ch source
[PL II MOVIE] mode: The Movie mode is for use with stereo television shows
and all programs encoded in Dolby Surround. The result is enhanced sound
field directionality that approaches the quality of discrete 5.1-channel sound.
[PL II MUSIC] mode: The Music mode is for use with any stereo music
recordings.
[PL II MATRIX] mode: The Matrix mode is the same as the Music mode
except that the directional enhancement logic is turned off. It may be used to
enhance mono signals by making them seem “larger.” The Matrix mode may
also find use in auto systems, where the fluctuations from poor FM stereo
reception can otherwise cause disturbing surround signals from a logic
decoder. The ultimate “cure” for poor FM stereo reception may be simply to
force the audio to mono.
[ON STAGE] mode: Simulates a large Concert hall
[VIRTUAL] mode: Realtime 3D positioned sound rendering technology
with stereo sources, optimized for stereo speakers. Listeners may experience amazing virtual surround effects with their own multimedia players.
5.1Ch source
[VIRTUAL] mode: The Multichannel sound changes the sound in 5.1 ch
into a virtual one in the 10.1 ch so that it provides such a feeling that
you listen to the sound simultaneously from the right and left speakers
and center speaker.
Set a pre-programmed sound field
This system has a number of pre-set surround sound fields. Select the one
which best suits the programme you are watching by pressing EQ repeatedly to
cycle through the options: NORMAL, NATURAL, AUTO EQ, POP, CLASSIC,
ROCK, JAZZ
[AUTO EQ]: AUTO EQ operates only in the MP3/ WMA files which include
the information. (ID3 Tag is operated ver.1 only.) WMA file operates to Normal
EQ regardless of Tag information.
11
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 12
Displaying Disc Information
Playing a Disc or file
ON REMOTE
ON REMOTE
1 Press DISPLAY:
DISPLAY
1 Open the disc tray: (On unit: Z)
2 Select a item:
vV
2 Insert a Disc: (On unit)
3 Adjust the Display menu settings:
bB
3 Close the disc tray: (On unit: Z)
-
4 To return the exit:
DISPLAY
4 Adjust the menu settings:
or Select a file from the menu:
vV b B
5 Start the Disc playing:
B
PLAY
6 To stop the Disc playing:
x
STOP
Displaying Disc Information - more you can do
You can select an item by pressing vV and change or select the setting by
pressing b B.
1/6
4/26
1 ENG
D
Current title (or track)
number/total number of titles (or tracks)
Current chapter number/total number of chapters
Elapsed playing time
Selected audio language or channel
3/2.1CH
1 KOR
1/3
Selected subtitle
Selected angle/total number of angles
-
vV
Playing a Disc or file - more you can do
Playing a DVD that has a menu
DVD
Most DVD now have menus which load first before the film begins to play. You
can navigate these menus using vV b B to highlight an option.
Press ENTER to select.
Skip to the next/previous chapter/track
ALL
Press SKIP (>) to move to the next chapter/track.
Press SKIP (.) to return to the beginning of the current chapter/track.
Press SKIP (.) twice briefly to step back to the previous chapter/track.
Selected sound mode
Symbol Used in this Manual
Pause playback
ALL
ALL
MP3 files
MP3
DVD and finalized DVD±R/RW
DVD
WMA files
WMA
Press PAUSE/STEP (X) to pause playback. Press PLAY (B) to continue playback.
DivX files
DivX
Audio CDs
ACD
Frame-by-Frame playback
All discs and file listed below
DVD
DivX
Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame.
Playing repeatedly
ALL
Press REPEAT repeatedly to select an item to be repeated. The current title,
chapter or track will be played back repeatedly. To return to normal playback,
press REPEAT repeatedly to select [OFF].
12
HT503SH-AH_DHKGLL_ENG_6553
Fast forward or fast reverse
7/25/08
1:42 PM
Page 13
Mixed disc or USB Flash Drive – DivX, MP3/WMA and JPEG
ALL
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the playback speed by pressing SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal speed.
When playing a disc or USB Flash Drive containing with DivX, MP3/WMA and
JPEG files together, you can select which menu of files you would like to play
by pressing TITLE
Selecting a subtitle language
DVD
Changing the character set to display DivX® subtitle correctly
During playback, press S-TITLE (
guage.
) repeatedly to select a desired subtitle lan-
Slow down the playing speed
DVD
DivX
While playback is paused, press SCAN (bb or BB) to slow down forward or
reverse playback. You can change the various playback speed by pressing
SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal
speed.
Watch and listen 1.5 times faster
DVD
ACD
MP3
WMA
Press PLAY when a DVD is already playing to watch and listen to a DVD 1.5
times faster than normal playback speed. B x1.5 will appear in the top right corner of the screen. Press PLAY again to return to normal playback speed.
Viewing the Title menu
DVD
Press TITLE to display the disc's title menu, if available.
Viewing the DVD MENU
DVD
Press MENU to display the disc menu, if available.
Starting play from selected time
DVD
DivX
Searches for the starting point of entered time code. Press DISPLAY during
playback and select the time clock icon. Input the required start time in hours,
minutes, and seconds, and press ENTER. If you enter the wrong number, press
CLEAR to enter again.
Last Scene Memory
DVD
DivX
If the subtitle does not display properly during playback, press and hold
S-TITLE for about 3 seconds then press S-TITLE to select another language
code until the subtitle is displayed properly
DivX file requirement
DivX
DivX disc compatibility with this player is limited as follows:
• Available resolution size: 800x600 (W x H) pixel
• The file name of the DivX subtitle is available by 45 characters.
• If there is impossible code to express in the DivX file, it may be displayed as
" _ " mark on the display.
• If the number of the screen frame is over 30 per 1 second, this unit may not
operate normally.
• If the video and audio structure of recorded files are not interleaved, either
video or audio is outputted.
• If the name of movie file is different from that of the subtitle file,during playback of a DivX file, subtitle may not be display..
• MPEG4 file extensions: “.avi”, “.mpg”, “.mpeg”
• Playable DivX subtitle: SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha(.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub)
SubViewer 2.0 (.sub/.txt), TMPlayer(.txt), DVD Subtitle System(.txt)
(Files (VobSub(.sub)) included with USB device is not supported)
• Playable Codec format: “DIVX3.xx”, “DIVX4.xx “, “DIVX5.xx”, “MP43”, “3IVX”
• Playable Audio format: “AC3”, “DTS”, “PCM”, “MP3”, “WMA”
• Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Disc: Less than 999 (total number of files and folders)
This unit memorizes the last scene from the last disc that is viewed. The last
scene remains in memory even if you remove the disc from the player or switch
off(Stand-by mode) the unit. If you load a disc that has the scene memorized,
the scene is automatically recalled.
13
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
Creating your own program ACD
1:42 PM
MP3
Page 14
WMA
Viewing photo files
You can play the contents of a disc in the order you want by arranging the order
of the music files on the disc. The program is cleared when the disc is removed.
Select a desired music file then press PROG./MEMO. or select “
“ and then
press ENTER to add the music file to the program list. To add all music files on
the disc, select “
” and then press ENTER. Select a music file from the program list then press ENTER to start programmed playback.To clear a music file
from the program list, select the music file you want to clear then press CLEAR
or select “
” icon and then press ENTER. To clear all music files from the
program list, select "
" then press ENTER.
ON REMOTE
1 Open the disc tray: (On unit: Z)
-
2 Insert a disc: (On unit)
-
3 Close the disc tray: (On unit: Z)
Displaying file information (ID3 TAG ) MP3
-
4 Select a photo file:
vV
5 Display the selected file in full screen:
ENTER
6 To return to the menu:
x
STOP
While playing an MP3 file containing file information, you can display the information by pressing DISPLAY repeatedly.
Viewing photo files - more you can do
MP3/WMA music file requirement
Viewing photo files as a slide show
MP3/WMA compatibility with this unit is limited as follows:
Use vV b B to highlight (
) icon then press ENTER to start slide show.
You can change slide show speed using b B when (
) icon is highlighted.
•
•
•
•
•
File extensions: “.mp3”, “.wma”.
Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)
Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
CD-R/RW, DVD±R/RW Format: ISO 9660
Maximum Files/Disc: Less than 999 (total number of files and folders)
Skip to the next/previous photo
Press SKIP (. or >) to view the previous/next photo.
Rotate a photo
Screen Saver
Use vV b B to rotate the photo in full screen mode.
The screen saver appears when you leave the unit in Stop mode for about five
minutes.
Pause a slide show
System Select
Press PAUSE/STEP (X) to pause a slide show. Press PLAY (B) to continue the
slide show.
You must select the appropriate system mode for your TV system. If “NO DISC”
appears in the display window, press and hold PAUSE/STEP (X) for more than
five seconds to be able to select a system.
Photo file requirement
JPEG file compatibility with this unit is limited as follows:
•
•
•
•
14
File extensions: “.jpg”
Photo size: Less than 2MB recommended
CD-R/RW, DVD±R/RW Format: ISO 9660
Maximum Files/Disc: Less than 999 (total number of files and folders)
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 15
5.1ch ez Set-up
Listening to the radio
Be sure that both FM and AM aerials are connected.
ON REMOTE
1 Turn the power on:
POWER
2 Select either FM or AM:
FUNCTION
3 Select a radio station:
TUN-/+
4 To ‘save’ a radio station:
A preset number will show in the display.
PROG/MEMO.
5 To select a ‘saved’ station input the preset
number:
Up to 50 radio stations can be saved.
PRESET-/+
6 To confirm press:
PROG/MEMO.
Listen to sound from TV, DVD and Digital Device with vivid 5.1ch mode.
Even in power off mode, if you press HT SPK, then power is on and
automatically changed to AUX OPT mode.
ON REMOTE
Listening to the radio - more you can do
1 Connect the unit’s OPTICAL IN jack to jack on
optical out of your TV (or Digital Device etc.).:
Look for radio stations automatically
2 Select the AUX OPT:
Press and hold TUN.-/TUN.+ for more than a second. The tuner will scan automatically and stop when it finds a radio station.
3 Listen sound with 5.1ch speaker.:
-
Choose a preset number for a radio station
4 To escape from AUX OPT:
FUNCTION or INPUT
To select the AUX OPT directly
HT SPK
When storing a radio station, the preset number can be chosen. When the player automatically shows a preset number, press PRESET -/+ to change it. Press
PROG./MEMO. to save your chosen number.
Delete all the saved stations
Press and hold PROG./MEMO. for two seconds. ERASE ALL will flash up on the
DVD receiver display. Press PROG./MEMO. to erase all saved radio stations.
Improve poor FM reception
Press PLAY (B) (MONO/ST). This will change the tuner from stereo to mono
and usually improve the reception.
15
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 16
Listening to music from your USB device more you can do
Listening to music from your
USB device
The advantage of connecting your portable USB player through the system’s USB port is that the USB device can be controlled from the system.
Compatible USB Devices
• Devices which require additional program installation when you have connected it to a computer, are not supported.
• MP3 Player : Flash type MP3 player.
The MP3 player requiring installation of a driver is not supported.
• USB Flash Drive : Devices that support USB2.0 or USB1.1. (In case USB 2.0
is inserted in the the player, if operates at the same speed
as that of USB 1.1)
USB device requirement
ON REMOTE
1 Connect the USB device to the unit
using a USB cable (not supplied).:
-
2 Select the USB function:
INPUT
3 Select a file from the menu:
vV
4 Start your music playing:
B
5 Before disconnecting the portable USB
device, change to any other function by
pressing:
FUNCTION or INPUT
6 Remove the USB device:
-
16
• Do not extract the USB device while in operation.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device might not be
recognized.
• A device using NTFS file system is not supported. (Only FAT (16/32) file system is supported.)
• The USB function of this unit does not support all USB devices.
• Digital camera and mobile phone are not supported.
• This unit is not supported when the total number of files is 1000 or more.
• If the connected USB device has two or more folders, a drive folder is displayed on the screen. If you want to move to the previous menu after you
select a folder, press RETURN.
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 17
Recording music from CD to
your USB device
ON REMOTE
1 Connect the USB device to the unit:
-
2 Select a mode (DVD/CD) in which you want
to record:
FUNCTION
3 Start the recording:
If you want to record desired music file in
Disc to USB. Select a file after start the
recording:
z
4 To stop a recording:
x
v V and z
STOP
Recording music from CD to your USB
device - more you can do
Record Audio CD source to USB
One track recording - If the USB recording is played during playback of the
CD, the only track would be recording into the USB
All track recording - If the REC button is pressed at the CD stop, all track
would be recording.
Program list recording - USB Records after selecting the tracks pressing the
PROG./MEMO. button if you want to record the track you want.
• If the USB can not record appears “NO USB”.“ERROR”,“USB FULL”,
“NO REC” on the display window.
• File will be stored to CD_REC folder in a format “TRK-001.mp3”.
• In the state CD-G, DTS disc USB Record is not operated.
• If you record more 999 files on CD_REC folder appears “ERROR” on the
display.
• New files are numbered in numeric sequence. if the total number of the files
are more than 999, delete some or store some in PC.
• External HDD,Card reader, Locked device and MP3 player is not supported.
The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes.
Be responsible
Respect copyrights
Listening to music from your
portable player
The player can be used to play the music from many types of portable
player
When you are recording, look out for the following
• When you start the USB direct recording, you can check the Recording percentage rate for the USB record on the display window during the recording.
• During the recording is no sound and not operate for volume .
• When you stop recording during playback, the file that has been recorded at
that time will be stored
• If you disconnect the USB without STOP button while recording, the file can
not delete in the PC.
• It is impossible to record from “ MIC IN”
• Playable USB REC. Bit rate : 96/128kbps (Refer to the SET UP page)
• During USB record can not operate Pause key for Audio CD only.
• Card reader device can not be use for USB record.
• USB port of the unit can not be connected to PC. The unit can not be used
as a storage device.
ON REMOTE
1 Connect the portable player by plugging the
unit into PORT. IN on the front of the player.:
-
2 Turn the power on:
POWER
3 Select the PORTABLE function:
INPUT
4 Turn the portable player on and start it
playing:
17
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 18
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Chinese
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose a area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
18
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
FI
FR
DE
GB
GR
Area
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
Code
GL
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
MY
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Code
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
Area
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Code
PY
PH
PL
PT
RO
RU
SA
SN
SG
SK
SI
ZA
KR
ES
Area
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 19
Troubleshooting
PROBLEM
No power
No picture
CAUSE
CORRECTION
The power cord is disconnected.
The TV is not set to receive the DVD signal.
Plug the power cord into the wall outlet securely.
Select the appropriate video input mode on the TV so the picture from the DVD Receiver appears on the TV screen.
Connect the video cables securely to both the TV and DVD
Receiver.
Select the correct input mode of the audio receiver so you can
hear the sound from the DVD receiver.
Connect the audio cables into the connection terminals correctly.
Replace with a new audio cable.
Clean the disc using a soft cloth with outward strokes.
Insert a disc
Insert a playable disc (check the disc type, colour system
and regional code).
Place the disc with the label or printed side facing
upwards.
Press SETUP to close the menu screen.
Enter your password or change the rating level.
The video cables are not connected securely.
There is little or no sound
The DVD picture quality is poor
A DVD/CD will not play
Equipment connected via the audio cable is not set to
receive DVD signal output.
The audio cables are not connected to the speakers or
receiver securely.
The audio cables are damaged.
The disc is dirty.
No disc is inserted.
An unplayable disc is inserted.
The disc is inserted upside down.
Humming noise heard while a
DVD or CD is playing
Radio stations can’t be tuned in
properly
The remote control doesn’t
work well / at all
The menu is open on screen.
There is a parental lock which prevents the playback of DVDs
with a certain rating.
The disc is dirty.
The DVD receiver is located too close to the TV, causing feedback.
The antenna is positioned or connected poorly.
The signal strength of the radio station is too weak.
No stations have been preset or preset stations have
been.cleared(when tuning by scanning preset channels).
The remote is not pointed directly at the DVD receiver.
The remote is too far from the DVD receiver.
There is an obstacle in the path between the remote control
and the unit.
The batteries in the remote control are flat.
Clean the disc using a soft cloth with outward strokes.
Move DVD receiver and audio components further away from
your TV.
Check the antenna connection and adjust its position.
Attach an external aerial if necessary.
Tune to the station manually.
Preset some radio stations, see page 15 for details.
Point the remote directly at the unit.
Use the remote within 23 feet (7m) of the DVD receiver.
Remove the obstacle.
Replace the batteries with new ones.
19
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 20
Types of Playable Discs
Type
About the
Logo
DVD-VIDEO: Discs such as movies that can
be purchased or rented.
DVD-R: Video mode and finalized only
DVD-RW: Video mode and finalized only
DVD VR format that have been finalized can not be
played in this unit
DVD+R: Video mode only
Supports the double layer disc also
DVD+RW: Video mode only
Audio CD:
This unit plays DVD±R/RW and CD-R/RW that contains audio titles,
DivX, MP3,WMA and/or JPEG files. Some DVD±RW/DVD±R or CDRW/CD-R cannot be played on this unit due to the recording quality or
physical condition of the disc, or the characteristics of the recording
device and authoring software.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license from Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued &
pending. DTS and DTS Digital Surround are registered trademarks and the
DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All
Rights Reserved.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.
20
Symbol Display
“
” may appear on your TV display during operation and indicates that the
function explained in this owner’s manual is not available on that specific DVD
video disc.
Regional Codes
This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
• Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play.
• If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.
Copyrights
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in
public, or rent copyrighted material without permission. This product features
the copy protection function developed by Macrovision. Copy protection signals
are recorded on some discs. When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection
technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525
OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 525p AND 625p UNIT, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
You have to set the disc format option to [Mastered] in order to make the discs
compatible with the LG players when formatting rewritable discs. When setting
the option to Live File System, you cannot use it on LG players.
(Mastered/Live File System : Disc format system for Windows Vista)
HT503SH-AH_DHKGLL_ENG_6553
7/25/08
1:42 PM
Page 21
Specifications
General
Power supply
Power consumption
Net Weight
External dimensions (W x H x D)
Operating conditions Temperature
Operating humidity
Laser
Refer to main label.
Refer to main label.
3.9 kg
430 x 73 x 305 mm
5°C to 35°C,
Operation status: Horizontal
5% to 85%
Semiconductor laser,
wavelength 650 nm
Tuner FM/AM [MW]
FM Tuning Range
FM Intermediate Frequency
AM Tuning Range
AM Intermediate Frequency
87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz
10.7 MHz
522 - 1,620 kHz or 520 - 1,720 kHz
450 kHz
Amplifier
Stereo mode
Surround mode Front:
70 W + 70 W (4Ω at 1 kHz, THD 10 %)
70 W + 70 W (THD 10 %) Center*: 70 W
Surround*: 70 W + 70 W
(4Ω at 1 kHz, THD 10 %)
Subwoofer*: 150 W (3Ω at 30 Hz, THD 10 %)
Speakers
Type
Impedance
Rated Input Power
Max. Input Power
Net Dimensions (W x H x D)
Net Weight
Front/Rear
Speaker
Center
speaker
Passive
Subwoofer
1 Way 1 Speaker
4Ω
70 W
140 W
106 x 193 x 103 mm
0.6 kg
1 Way 1 Speaker
4Ω
70 W
140 W
331 x 111 x 96 mm
0.9 kg
1Way1Speaker
3Ω
150 W
300 W
170 x 400 x 382 mm
5.7 kg
Designs and specifications are subject to change without
prior notice.
21
HT503SH-AH_DHKGLL_ENG_6553
22
7/25/08
1:42 PM
Page 22
Download PDF