LG | XD14 | LG XD14 Owner’s Manual

ENGLISH
User Guide
XD14 (XD14-A0U/ XDS14V)
As an ENERGY STAR Partner, LG
has determined that this product
or product models meet the
ENERGY STAR guidelines for
energy efficiency.
®
®
ENERGY STAR is a U.S. registered mark.
®
P/NO: MFL62426439
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
CAUTION : The apparatus shall not be exposed to water (dripping or splashing)
and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION : concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit ;
That is, a single outlet circuit which powers only that appliance and has no additional
outlets or branch circuits. Check the specification page of this owner’s manual to be
certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are
® Partner,
STAR
ENERGY
STAR
Partner,
As an
ENERGY
dangerous. AnyAs
of an
these
conditions
could
result
in electric
shock
or®fire.
Periodically
LGofhas
determined
has determined
that
this or
examine the cord
your
appliance, that
and ifthis
itsLG
appearance
indicates
damage
product
or product models
meet
deterioration, unplug
it, discontinue
use of the
appliance,
and have
the cord
replaced
product
or product
models
meet
STAR
the ENERGYpart
with an exact replacement
by ®
anguidelines
authorized
ice center.
STAR® guidelines for
NERGY
the for
Eserv
energy
energy abuse,
efficiency.
Protect the power
cord efficiency.
from physical or mechanical
such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
The exclamation point within an equilateral triangle is intended to alert
® is a U.S. registered
®
NERGY
TAR
mark.
E
S
is aappliance.
U.S. registered mark.
ENERGY
wall outlets, and the point where
the cordSTAR
exits the
the user to the presence of important operating and maintenance
® Partner,
As an ENERGY STAR
(servicing) instructions in the literature accompanying the product.
To disconnect
power from the mains, pull out the mains cord plug. When installing
LG has determined that this
the product, ensure that the plug is easily accessible.
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
product or product models meet
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
the ENERGY STAR® guidelines for
Where the mains plug is used as the disconnect device, the disconnect device shall
energy efficiency.
® Partner, remain readily operable.
STARcase
an ENERGY
WARNING : Do not install this equipment in a confined spaceAssuch
as a book
LG
has determined
thisregistered mark.
a U.S.
ENERGY
STAR® is that
product or product models meet
® guidelines for
S
NERGY
TAR
the
E
CAUTION: Do not block any ventilation openings. Install in accordance with the
energy efficiency.
or similar unit.
manufacturer’s instructions. Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the Eproduct
it from over
NERGY Sand
TAR®to
is protect
a U.S. registered
mark.
heating. The openings shall be never be blocked by placing the product on a bed,
sofa, rug or other similar surface. This product shall not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer’s instruction has been adhered to.
CAUTION : This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference. Shall the unit require maintenance, contact an
authorized service center. Use of controls, adjustments or the performance of
procedures other than those specified herein may result in hazardous radiation
exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i2 2
IMPORTANT SAFETY NOTICE
The cord grip for the plug fitted to this product is built
into the existing power cord as supplied. If, for any
reason you need to shorten the cord,
DO NOT RE-USE THE PLUG.
A new plug must be used to ensure your continued
safety by securing the plug to the power cord in
accordance with Plug & Socket Regulations 1994.
As an ENERGY STAR® Partner,
LG has determined that this
product or product models meet
the ENERGY STAR® guidelines for
energy efficiency.
ENERGY STAR® is a U.S. registered mark.
2009.7.8 10:34:31 AM
Welcome to your New DVD MICRO Hi-Fi SYSTEM
Contents
Setting up
Player
Remote control OSD initial language settings -optional
Initial settings the Area Code
Adjusting the general settings
Setting the Clock
Displaying disc information
Playing a Disc or file
Using an USB device
Listening to cassette tape
Listening to the radio
Recording to Cassette tape
Synchronized recording from CD to Tape
Recording to USB
Language Codes
Area Codes
Troubleshooting
Types of Playable Discs
Specifications
4
5
6
7
7
8-9
9
10
10-12
12
13
13
14
14
15
16
16
17
18
19
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i3 3
2009.7.8 10:34:32 AM
Setting up
FM wire antenna
1 Video Out connection
Connect the VIDEO OUTPUT(MONITOR) jack on the unit to the corresponding
input jack on your TV using a Video cable.
Listening to music from your portable player
The unit can be used to play the music from many types of portable player. Connect
the portable player to the connector.
2 Connect the wires to the unit.
Match each wire’s coloured band to the same coloured connection terminal on the
reverse of the unit.
To connect the cable to the unit, press each plastic finger pad to open the connection
terminal. Insert the wire and release the finger pad.
3 Plug the unit plug into a wall socket.
Notes
• If TV screen becomes discolored do not place front speakers within 30cm from TV.
• Be sure to match the speaker cord to the appropriate terminal on the components:
+ to + and – to –. If the cords are reversed, the sound will be distorted and will lack
base.
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i4 4
2009.7.8 10:34:33 AM
Player
Display window
EQ
You can choose fixed sound impression.
1/\ (POWER)
You can set up the unit into an economic power save
mode.
In the power-on status, press and hold 1/] for about 3
seconds. To cancel power save mode, press 1/] .
PROGRAM/ MEMORY
SET
Confirms the settings.
CLOCK
FUNCTION
You can set the clock.
Selects the function.
TIMER
./>
- SKIP/ SEARCH/ TUNING +
z REC
Recording to USB.
USB Port
BX
Play/ Pause
PRESET +
x
STOP/ PRESET -
Volume Control
Cassette Door
PHONES
A warning that excessive sound pressure from
earphones and headphones can cause hearing
loss.
Button door (For Cassette)
Screen Saver
The screen saver appears when you leave the unit in Stop
mode for about five minutes.
OPEN
Cassette control buttons
z
Recording
B
Play
m/M
Searching
xZ
Stop/ Eject
X
Pause
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i5 5
2009.7.8 10:34:34 AM
Remote control
SETUP : Accesses or removes setup menu.
DISPLAY : Accesses On-Screen Display.
MENU : Accesses the menu on a DVD disc.
RETURN (O) : Moving backwards in the menu or exited the setup
menu.
PRESET (+/-) : Selects programme of Radio.
TUN. (-/+) : Tunes in the desired radio station.
b B v V (left/ right/ up/ down): Used to navigate on screen
displays.
SELECT/ENTER : Acknowledges menu selection.
♬
1 POWER : Switches the unit ON or OFF. (Power Save Mode)
FUNCTION : Selects the function and input source.
TITLE : If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu may not
appear.
SLEEP : You can select delay time between 10 and 180 minutes, after the unit will turn off. To check the remaining time,
press SLEEP.
EQ(Equalizer effect) : You can choose sound impressions.
0-9 numerical buttons : Selects numbered options in a menu.
STOP (x) : Stops playback or recording.
PAUSE/STEP (X) : Pause playback.
PLAY (B) : Starts playback.
SCAN (bb/BB) : Search backward or forward.
REC (z) : Recording.
SKIP (./ >) : Go to next or previous chapter/ track/ file.
MUTE : To mute the sound.
VOL (Volume) (+/-) : Adjusts volume.
REPEAT/RANDOM : To select a play mode. (Random/ Repeat)
S-TITLE : During playback, you can select a desired subtitle
language .
CLEAR : Removes a track number on the program List.
PROG./MEMO. : Enter a radio station’s frequency into the tuner.
Put the batteries into the remote control.
Make sure that the + (plus) and - (minus) on the batteries
match those on the remote control.
Battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
Remote control Operation
Point the Remote Control at the remote sensor and press
the buttons.
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i6 6
2009.7.8 10:34:36 AM
OSD initial language settings - Optional
During the first use of this unit, the initial language setup menu appears on your
TV screen. You must complete initial language selection before using the unit.
English will be selected as the initial language.
ON REMOTE
1 T
urn the power on:
The language list appears.
2 Select the language:
3 Press:
4 To confirm press:
1 POWER
bBvV
SELECT/
ENTER
bB
SELECT/
ENTER
Initial settings the Area Code
When you use this unit for the first time, you have to set the Area Code as shown
below. Refer to page 16 for code list.
ON REMOTE
1 Display setup menu:
2 Select LOCK menu on the first level:
SETUP
vV
3 M
ove to second level:
The activated Area Code appears on the second
level.
B
4 Move to the third level:
B
5 Enter a new password:
Numeric (0-9)
and
SELECT/
ENTER
6 Recheck the entered new password:
7 Select a code for a geographic area:
After select, Rating and Password will be
activated.
bBvV
8 T
o confirm what you press :
Make sure to finish setting the Area Code.
SELECT/
ENTER
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i7 7
2009.7.8 10:34:36 AM
Display Mode – If you selected 4:3, you’ll need to define how you would like wide
screen programs and films to be displayed on your TV screen.
Adjusting the general settings
[Letterbox]
ON REMOTE
1 Display setup menu:
2 Select a desired option on the first level:
3 Move to the second level:
4 S
elect a desired option on the second
level:
5 Move to the third level:
6 Change the setting:
SETUP
vV
B
vV
B
v V, SELECT/
ENTER
Adjusting the general settings - more you can do
Adjusting the language settings
OSD (Menu Language) – Select a language for the Setup menu and on-screen
display.
Disc Audio/ Disc Subtitle/ Disc Menu – S
elect a language for the Disc Audio/ Disc
Subtitle/ Disc Menu.
[Original]
[Other]
[Off]
(for Disc Subtitle)
Refers to the original language in which the disc was recorded.
To select another language, press number buttons then
SELECT/ENTER to enter the corresponding 4-digit number
according to the language code list in the reference chapter
(Page 16). If you make a mistake before pressing
SELECT/ENTER, press CLEAR.
Turn off Subtitle.
Adjusting the display settings
[Panscan]
This displays a wide screen picture with black bands at the top and
bottom of the screen.
This fills the entire 4:3 screen, cropping the picture as necessary.
Adjusting the audio settings
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo. This function is
effective for multi-channel karaoke DVDs only.
Adjusting the lock settings
To access the lock options, you must enter the 4-digit password. If you have not yet
entered a password you are prompted to do so.
1 Enter a 4-digit password then press SELECT/ENTER.
2 Enter it again then press SELECT/ENTER to verify. If you make a mistake while
entering number, press CLEAR then correct it.
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New]
[Change]
Enter a new 4-digit password using the numerical buttons then
press SELECT/ENTER. Enter the password again to confirm.
Enter the new password twice after entering the current password.
If you forget your password you can reset it.
1 Remove the disc in the unit.
2 Press SETUP to display the Setup menu. Input ‘210499’ and press SELECT/
ENTER. The password has now been cleared.
Area Code – Select a code for a geographic area as the playback rating level. This
determ­ines which area’s standards are used to rate DVDs controlled by the parental
lock. See the Area Codes on page 16.
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3]
[16:9]
Select when a standard 4:3 TV is connected.
Select when a 16:9 wide TV is connected.
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i8 8
2009.7.8 10:34:37 AM
Adjusting the others settings
Setting the Clock
DivX(R) Registration – We provide you with the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase videos using the DivX® VOD
service.
For more information, visit www.divx.com/vod.
Press SELECT/ENTER and you can view the registration code of the unit.
1 Turn the power on:
Enjoying a pre-programmed sound field
2 Press for at least 2 seconds:
The system has a number of pre-set surround sound fields. You can select a desired
sound mode by using EQ. The displayed items for the Equalizer may be different
depending on sound sources and effects.
3 Choose from either:
AM 12:00 (for an AM and PM display) or 0:00 (for
a 24 hour display)
AUTO EQ
ROCK
POP
CLASSIC
Realizes the sound equalizer that is the most similar to the
genre of which is included in the MP3 ID3 tag of song files.
This program lends an enthusiastic atmosphere to the sound,
giving you the feeling you are at an actual rock, pop or classic
concert.
ON UNIT
4 Confirm your selection:
5 Select the hours:
6 Press:
7 Select the minutes:
XDSS ON
Reinforce the treble, bass and surround sound effect.
NORMAL
You can enjoy the sound without equalizer effect.
8 Press:
1/]
CLOCK
./>
SET
./>
SET
./>
SET
Setting the clock - more you can do
Using your player as an alarm clock
1 Press and hold TIMER. Each functions flashes.
2 Press SET when the function you want to be woken by is showing.
- If you choose TUNER you will be shown the stations you have saved as
presets. Use ./> on the unit to select the station you want, t hen press
SET on the unit.
3 “ON TIME” will be displayed. This is where you set the time you want the alarm
to start.
Use ./> to change the hours and minutes and press SET to save.
4 The “OFF TIME” will be displayed. This is where you set the time you want the
function to stop.
Use ./> to change the hours and minutes and press SET to save.
5 You will be shown the volume (VOL) you want to be woken by. Use ./>
to change the volume and SET to save. Switch the system off. The clock icon
“ ” shows that the alarm is set.
6 When the system is turned off you can check the time the alarm and turn the
alarm on and off by pressing TIMER.
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i9 9
2009.7.8 10:34:37 AM
Displaying Disc information
Playing a Disc or file
ON REMOTE
ON REMOTE
1 Press:
DISPLAY
2 Select an item:
3 Adjust the display menu settings:
4 To return the exit:
vV
2 Select DVD/CD:
bB
3 A
djust the menu settings:
/ Select a file from the menu:
O RETURN
Displaying Disc Information - more you can do
You can select an item by pressing v V and change or select the setting by
pressing b B.
Current title (or track/ file)
number/ total number of titles (or tracks/ files)
Current chapter number/ total number of chapters
Elapsed playing time
Selected audio language or channel
MP3 files WMA files Audio CDs 4 Start the disc playing:
B PLAY
5 To stop the disc playing:
x STOP
Playing a Disc or file - more you can do
DVD
Mixed disc or USB Flash Drive – DivX, MP3/ WMA and JPEG
When playing a disc or USB Flash Drive containing with DivX, MP3/ WMA and
JPEG files together, you can select menu of files which you would like to play by
pressing MENU.
Skipping to the next/ previous chapter/ track/ file
Symbol Used in this Manual
DVD DivX JPG vVbB
Most DVDs now have menus which load first before the film begins to play.
1 You can navigate these menus using v V b B to highlight an option.
2 Press SELECT/ENTER to select.
Selected sound mode
ALL
FUNCTION
Playing a DVD that has a menu
Selected subtitle
Selected angle/ total number of angles
All discs and file listed below DVD and finalized DVD±R/RW DivX files JPEG files
1 Insert a disc on unit:
MP3
MP3
WMA
ACD
DVD
WMA
DivX
ACD
Press SKIP (>) to move to the next chapter/ track/ file.
Press SKIP (.) to return to the beginning of the current chapter/ track/ file.
Press SKIP (.) twice briefly to step back to the previous chapter/ track/ file.
Pausing playback
ALL
1 Press PAUSE/STEP (X) to pause playback.
2 Press PLAY (B) to continue playback.
Frame-by-Frame playback
DVD
DivX
Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame.
10
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i10 10
2009.7.8 10:34:39 AM
Playing repeatedly or randomly
Starting play from selected time
Press REPEAT/RANDOM repeatedly, and the current title, chapter or track will be
played back repeatedly or randomly.
To return to normal playback, press REPEAT/RANDOM repeatedly.
- Random play mode : only music files.
Searches for the starting point of entered time code.
1 Press DISPLAY then select clock icon.
2 Enter a time then press SELECT/ENTER.
For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter “11020”
by using numerical buttons and press SELECT/ENTER. if you enter the wrong
number, press CLEAR to enter again.
MP3
DVD
WMA
DivX
ACD
Fast forward or fast reverse
MP3
DVD
WMA
DivX
ACD
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the playback speed by pressing SCAN (m or M) repeatedly.
Press PLAY (B) to continue play at normal speed.
1.5 times faster playback
DVD
Press PLAY when a DVD is already playing to watch and listen to a DVD 1.5 times
faster than normal playback speed. “B x1.5” will appear in the screen. Press B
PLAY again to return to normal playback speed.
Slow down the playing speed
DVD
1 While playback is paused, press m/M on the remote control.
2 You can change the various playback speed by pressing m/M repeatedly.
3 Press B to continue play at normal speed.
Selecting a subtitle language
DVD
DivX
During playback, press S-TITLE repeatedly to select a desired subtitle language.
Changing the character set to display DivX® subtitle correctly
- Optional DivX
1 If the subtitle does not display properly during playback, press and hold S-TITLE
for about 3 seconds to display the language code menu.
2 Press S-TITLE repeatedly to change the language code until the subtitle is
displayed properly.
Viewing the Title menu
DVD
Press TITLE to display the disc's title menu, if available.
Last Scene Memory
DVD
DivX
DVD
This unit memorizes the last scene from the last disc that is viewed. The last scene
remains in memory even if you remove the disc from the unit or switch off (Stand-by
mode) the unit. If you load a disc that has the scene memorized, the scene is
automatically recalled.
Creating your own program
MP3
WMA
ACD
You can play the contents of a disc in the order you want by arranging the order of
the musics on the disc. The program is cleared when the disc is removed.
1 Select a desired music then press PROG./MEMO. or select “
“ and then press
SELECT/ENTER to add the music to the program list.
2 To add all music in the disc, select “
” and then press SELECT/ENTER.
3 Select a music from the program list then press SELECT/ENTER to start
programmed playback.
4 To clear a music from the program list, select the music you want to clear then
press CLEAR or select “
” icon and then press SELECT/ENTER.
To clear all music from the program list, select "
" then press SELECT/ENTER.
Displaying file information (ID3 TAG )
MP3
While playing an MP3 file containing file information, you can display the information
or time by pressing DISPLAY repeatedly.
Viewing photo files as a slide show
JPG
1U
se v V b B to highlight (
) icon then press SELECT/ENTER to start slide
Show.
2 You can change slide show speed using b B when (
) icon is highlighted.
Skipping to the next/ previous photo
JPG
Press SKIP (. or >) or b B to view the previous/ next photo.
Rotating a photo
JPG
Use v V to rotate the photo in full screen counterclockwise or clockwise while
viewing a photo in full screen.
11
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i11 11
2009.7.8 10:34:40 AM
Playable file requirement
DivX
• Available resolution: within 800x600 (W x H) pixels
• The file name of the DivX subtitle should be entered within 45 characters.
• If there is impossible code to express in the DivX file, it may be displayed as “ _ “
mark on the display.
• If the video and audio structure of recorded files is not interleaved, either video or
audio is outputted.
• Playable DivX file : “.avi”, “.mpg”, “.mpeg”, “.divx”
• Playable Subtitle format : SubRip (*.srt/ *.txt), SAMI (*.smi), SubStation Alpha (*.ssa/
*.txt), MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/ *.txt).
• Playable Codec format : “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “MP4V3”, “3IVX”.
• Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA”.
• For Discs formatted in Live file system, you can not play it on this unit.
• If the name of movie file is different from that of the subtitle file, during playback of
a DivX file, subtitle may not be displayed.
MP3/ WMA
• Sampling frequency : within 32 - 48 kHz (MP3/ WMA)
• Bit rate : within 32 - 320 kbps (MP3), 40 - 192 kbps (WMA)
• File extensions : “.mp3”/ “.wma”
• CD-ROM file format : ISO 9660 LEVEL 1 / JOLIET
• We recommend that you use Easy-CD Creator, which creates an ISO 9660 file
system.
JPG
•
•
•
•
Normal: 5120 x 3840, Progressive jpeg: 2043 x 1536
Recording condition: ISO9660 LEVEL 1/ JOLIET
Maximum files : Under 999.
Some discs may not operate due to a different recording format or the condition of
disc.
• File extensions: “.jpg”
Using an USB device
You can enjoy media files saved on an USB device by connecting it to the USB
port of the unit. If you want to operate other function, see the DISC playback
section.
ON REMOTE
1 Connect the USB device to the USB port of the
unit.
2 Select the function:
3 Select a file you want to play:
4 Start your media playing:
5 To stop, press:
6 Before disconnecting, you have to change to
any other function:
FUNCTION
vV
B PLAY
x STOP
FUNCTION
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that supports USB 2.0 or USB 1.1.
• The USB function of this unit does not support all USB devices.
USB device requirement
• Devices which require additional program installation when you have connected
it to a computer, are not supported.
Look out for the following.
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be searched.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not recognized.
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.)
• This unit is not supported when the total number of files is 1000 or more.
• External HDD, Card readers, Locked devices, or hard type USB devices are not
supported.
• USB port of the unit cannot be connected to PC.
• The unit can not be used as a storage device.
12
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i12 12
2009.7.8 10:34:41 AM
OPEN
Listening to cassette tape
1
Listening to the radio
2
1 Select FM:
2 Select a radio station:
OPEN
ON UNIT
1 Open the button door:
2 Open the tape door:
OPEN
xZ
3 Insert the tape.
4 Close the tape door.
5 Select the TAPE function:
FUNCTION
6 S
tart the tape playing:
B
7 To stop a tape playing:
xZ
Listening to cassette tape - more you can do
Playing Fast backward or Forward
Press bb /BB on the unit during playback, (or stop) press B (or xZ ) at a point
you want.
Pausing or restart a tape
Press [] on the unit during playback. Press this button again to resume play.
ON UNIT
ON REMOTE
FUNCTION
FUNCTION
./>
TUN. - / +
3 To save a radio station:
A preset number will show in the
display.
PROGRAM/
MEMORY
PROG./MEMO.
4 Select the preset number:
Up to 50 radio stations can be
saved.
PRESET - / +
PRESET - / +
5 To confirm press:
PROGRAM/
MEMORY
PROG./MEMO.
Listening to the radio - more you can do
Looking for radio stations automatically
Press and hold TUN.-/ TUN.+ for more than a second. The tuner will scan
automatically and stop when it finds a radio station.
Deleting all the saved stations
1P
ress and hold PROG./MEMO. for two seconds.
- “ERASE ALL” will flash up on the display.
2 Press PROG./MEMO..
Improving poor FM reception
Press B PLAY on the remote control. This will change the tuner from stereo to
mono and usually improve the reception.
13
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i13 13
2009.7.8 10:34:42 AM
OPEN
OPEN
Recording to cassette tape
1
Synchronized Recording from CD to Tape
1
2
OPEN
2
OPEN
ON UNIT
1 Open the button door:
2 Open the tape door:
OPEN
xZ
3 Insert a blank tape and close the door.
4 S
elect a mode in which you want to record:
Play back a sound source first.
5 Start the recording:
6 To stop:
ON UNIT
1 Open the button door:
2 Open the tape door:
OPEN
xZ
3 Insert a blank tape and close the door.
FUNCTION
z and B
xZ
4 Select the CD function:
> Audio CD only
5 Press the button on a stop status to move to CD
synchronizing mode.
The synchronized recording is started automatically
after about 7 seconds.
6 To stop:
FUNCTION
z and B
xZ
14
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i14 14
2009.7.8 10:34:43 AM
When you are recording, look out for the following
Recording to USB
ON REMOTE
1 C
onnect the USB device to the USB port of the
unit.
2 S
elect a mode in which you want to record:
(ex. CD/ TUNER/ ...)
Play a sound source first
If you want to record desired music file in disc to
USB, play a file before starting the recording.
FUNCTION
3 Start the recording:
z REC
4 To stop, press:
x STOP
Recording to USB - more you can do
Recording Music file in disc source to USB
One track recording
If the USB recording is started during playback of the CD, the one track/ file would
be recording into the USB.
All tracks recording
If the z REC is pressed at the CD stop, all tracks/ files would be recording.
The files in the sub-folders are not recorded during all track recording.
Program list recording
USB records after creating your own program if you want to record the track you
want (AUDIO CD Only).
• You can check the recording percentage rate for the USB record on the screen
during the recording.
• During recording MP3/ WMA, there is no sound.
• When you stop recording during playback, the file that has been recorded at that
time will be stored. (AUDIO CD Only)
• Do not remove the USB device during USB recording. If not, an incomplete file
may be made and not deleted on PC.
• If USB recording does not work, the message like “NO USB”, “ERROR”, “USB
FULL” or “NO REC” is displayed on the display window.
• Multi card reader device or External HDD can not be used for USB recording.
• A file is recorded by 2 hours (about 128 Mbytes) when you record for a long term.
• In the state CD-G disc, USB record is not operated.
• You may not record more than 999 files.
• The file number is saved automatically.
• It’ll be stored as follows.
AUDIO CD
0 CD_REC
TRK-001
TRK-002
-
MP3/ WMA
0 FILE_REC
001_ABC(File name)
002_DEF(File name)
-
The other sources.
0 EXT_REC
AUD-001
AUD-002
-
The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offense.
This equipment should not be used for such purposes.
Be responsible
Respect copyrights
15
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i15 15
2009.7.8 10:34:43 AM
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Chinese Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maori Marathi Moldavian Mongolian Nauru
Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language Quechua Rhaeto-Romance
Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi Singhalese Slovak Slovenian Spanish Sudanese Swahili Swedish Tagalog Code
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Language Tajik Tamil Telugu Thai Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapük Welsh Wolof Xhosa Yiddish Yoruba Zulu Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose an area code from this list.
Area Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
Area Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador Ethiopia Fiji Finland France Germany Great Britain Greece Code
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
FI
FR
DE
GB
GR
Area Greenland Hong Kong Hungary India Indonesia Israel Italy Jamaica Japan Kenya Kuwait Libya Luxembourg Malaysia Code
GL
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
MY
Area Maldives Mexico Monaco Mongolia Morocco Nepal Netherlands Netherlands Antilles
New Zealand Nigeria Norway Oman Pakistan Panama Code
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
Area Paraguay Philippines Poland Portugal Romania Russian Federation
Saudi Arabia Senegal Singapore Slovak Republic Slovenia South Africa South Korea Spain Code
PY
PH
PL
PT
RO
RU
SA
SN
SG
SK
SI
ZA
KR
ES
Area Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Uganda Ukraine United States Uruguay Uzbekistan Vietnam Zimbabwe Code
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
16
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i16 16
2009.7.8 10:34:45 AM
Troubleshooting
PROBLEM
CAUSE
CORRECTION
No Power
The power cord is disconnected.
Plug the power cord into the wall outlet securely.
No Picture
The TV is not set to receive the DVD signal.
Select the appropriate video input mode on the TV so the
picture from the unit appears on the TV screen.
The video cables are not connected securely.
Connect the video cables securely to both the TV and unit.
No disc is inserted.
Insert a disc.
An unplayable disc is inserted.
Insert a playable disc (check the disc type, colour system
and regional code).
The disc is inserted upside down.
Place the disc the side you can see the printed side.
The setup menu is open on screen.
Press SETUP to close the menu screen.
A DVD/CD will not play.
There is a parental lock which prevents the playback of Enter your password or change the rating level.
DVDs with a certain rating.
Humming noise heard while a
DVD or CD is playing.
The disc is dirty.
Clean the disc using a soft cloth with outward strokes.
The unit is located too close to the TV, causing
feedback.
Move the unit and audio components further away from your
TV.
Radio stations can’t be tuned
in properly.
The antenna is positioned poorly.
Attach an external aerial if necessary.
The signal strength of the radio station is too weak.
Tune to the station manually.
No stations have been preset or preset stations
have been cleared (when tuning by scanning preset
channels).
Preset some radio stations.
The remote is not pointed directly at the unit.
Point the remote directly at the unit.
The remote is too far from the unit.
Use the remote within 23 feet (7m) of the unit.
There is an obstacle in the path between the remote
control and the unit.
Remove the obstacle.
The batteries in the remote control is flat.
Replace the batteries with new one.
The remote control doesn’t
work well / at all
17
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i17 17
2009.7.8 10:34:45 AM
About the “x” Symbol Display
Types of Playable Discs
Type
“x” may appear on your TV display during operation and indicates that the function
explained in this owner’s manual is not available on that specific DVD video disc.
LOGO
DVD-VIDEO : Discs such as movies that can be
purchased or rented.
DVD-R : Video mode and finalized only
DVD-RW : Video mode and finalized only
DVD VR format that have been finalized can not
be played in this unit.
DVD+R : Video mode only
Supports the double layer disc also
DVD+RW : Video mode only
Audio CD : Music CDs or CD-R/ CD-RW in music
CD format that can be purchased.
This unit plays DVD±R/ RW and CD-R/ RW that contains audio titles,
DivX, MP3, WMA and JPEG files. Some DVD±RW/ DVD±R or CDRW/ CD-R cannot be played on this unit due to the recording quality
or physical condition of the disc, or the characteristics of the recording
device and authoring software.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories.
Regional Codes
This unit has a regional code printed on the rear of the unit. This unit can play only
DVD discs labeled same as the rear of the unit or “ALL”.
• Most DVD discs have a globe with one or more numbers in it clearly visible on the
cover. This number must match your unit’s regional code or the disc cannot play.
• If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.
Copyrights
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public,
or rent copyrighted material without permission. This product features the copy
protection function developed by Macrovision. Copy protection signals are recorded
on some discs. When recording and playing the pictures of these discs picture
noise will appear. This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION
SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT.
IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH
THIS MODEL 525p AND 625p UNIT, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
You have to set the disc format option to [Mastered] in order to make the discs
compatible with the LG players when formatting rewritable discs. When setting the
option to Live File System, you cannot use it on LG players.
(Mastered/ Live File System : Disc format system for Windows Vista)
18
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i18 18
2009.7.8 10:34:47 AM
Specifications
General
Power supply
Refer to the label attached on the unit.
Power consumption
Net Weight
External dimensions (WxHxD)
Operating temperature
Operating humity
Output power
T.H.D
Tuner
FM Tuning Range
DVD/CD
Frequency response
Signal-to-noise ratio
Dynamic range
Refer to the label attached on the unit.
2.2 kg
149 x 235 x 245 mm
5 °C - 35 °C
5% - 85%
5W+5W
0.5 %
Cassette tape player
F.F/REW Time
Frequency Response
Signal to Noise Ratio
Channel Separation
Erase Ratio
Speakers (XDS14V)
Type
Impedance
Rated Input Power
Max. Input Power
Net Dimensions (WxHxD)
Net Weight (1EA)
87.5 - 108.0 MHz or 87.50 - 108.00 MHz
100 - 18 kHz
60 dB
55 dB
120 sec (C-60)
125 - 8 KHz
40 dB
30 dB (P/B)/ 30 dB (R/P)
50 dB (MTT-5511)
2 Way 2 Speakers
4Ω
5W
10 W
130 x 245 x 135 mm
0.97 kg
Designs and specifications are subject to change without prior
notice.
19
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i19 19
2009.7.8 10:34:47 AM
XD14-A0U.AHKGLL_LGEHK_ENG_6439.i20 20
2009.7.8 10:34:47 AM
Download PDF