LG | 55LM6700 | LG 32LM6690 Owner's manual

使用说明书
液晶体电视
使用电视之前,请仔细阅读本手册,并且妥善保管以供日後查阅。
32/42LM6690
47/55LM6700
P/N:MFL63720136(1203-REV01)
http://www.lg.com
2
目录
目录
3 授权
30 使用遥控器
30 使用神奇遥控器
3 开放源码注意
31 维护
4 安全指引
31 清洁电视机
31 - 萤幕,边框,前框和底座
31 - 电源线
11 安装顺序
11 组装和准备
粤语
11
13
14
15
16
16
19
20
21
附件
另购产品
零件和按键
抬起和移动电视机
装配电视机
- 连接底座
- 台式安装
- 壁式安装
- 整理缆线
31 疑难排解
32 产品规格
22 建立连接
22
23
24
24
25
25
26
26
26
天线 / 有线连接
HDMI 连接
DVI 与 HDMI 连接
RGB-PC 连接
色差连接
复合连接
音频连接
- 数字光学音频连接
USB 连接
27 遥控器
28 神奇遥控器
29 登记神奇遥控器
29 如何使用神奇遥控器
29 使用神奇遥控器时的注意事项
30 使用“使用指南”
警告
• 如无视警告讯息,可能造成重伤或出
现事故或死亡。
注意
• 如无视注意讯息,可能造成轻伤或使
产品遭受损坏。
注
• 使用前,请仔细阅读备注资讯中的正
确用法。
授权
3
授权
支援的授权因型号的不同而有所分别。如欲获取更多关于授权的资讯,请浏览 www.lg.com。
在杜比系统实验室授权下制造。 “Dolby” 和双 D 标识是 Dolby Laboratories
的商标。
HDMI,HDMI 商标和高清多媒体界面是 HDMI Licensing LLC 的商标或注册商
标。
DIVX 视频简介 : DivX® 是由 DivX, LLC 建立的数码视频格式。这是一部播放
DivX 视频的 DivX Certified® 设备。请浏览 www.divx.com 获取更多资讯,以
及获得将您的档案转化成 DivX 视频的软件工具。
关于 DIVX 视频点播:DivX Certified® 设备必须进行注册,这样才能播放所订
购的 DivX 视频点播 (VOD) 电影。如欲获取您的注册码,在您的设备安装选单
中查找 DivX VOD。请浏览 vod.divx.com 获取更多关于如何完成注册的资讯。
“DivX®,DivX Certified®, DivX Plus® HD 和相关标识是 DivX,Inc. 的商标,
并且经授权后方可使用。”
“受以下国家专利保护:
7,295,673;7,460,66; 7,515,710;7,519,274”。
在美国专利号:5,956,674; 5,974,380; 6,487,535 或其他美国和世界范围已
经发行或还在审核的专利授权下制造的。DTS, DTS标识和标识集合是被登记
授权的商标,DTS2.0+ Digital Out是DTS,Inc 的商标。产品包括 software. ©
DTS, Inc。保留所有权。
开放源码注意
欲获取 GPL、LGPL、MPL 和其他开放源码许可证下的源代码(载于本产品之中),请浏 http://
opensource.lge.com。除源代码外,还可下载所有的许可证条款、免责声明和版权声明。
粤语
“播放包括付费内容的、高达 1080p 高清的 DivX® 和 DivX Plus®(H.264/
MKV) 视频的 DivX Certified® 。
4
安全指引
安全指引
使用本产品之前,请仔细阅读这些安全防范。
警告
• 切勿将电视和遥控器置于下列环境中:
» 阳光直射的地方。
» 湿度较大的位置,如:浴室。
» 靠近任何热源,如炉灶以及其他释放热量的设备。
» 靠近厨房台面或易于接触蒸汽或油的加湿器。
» 暴露在风雨中。
» 靠近盛水的容器,如:花瓶。
否则,可能导致火灾,电击,故障或 产品变形。
• 切勿将产品放在会接触粉尘的地方。
否则坑引起火灾。
• 电源插头为切断装置。插头必须始终保持可用状态。.
粤语
• 手湿时切勿触摸电源插头。另外,如果软线插脚潮湿或覆盖灰尘,则将插脚彻底
清除或擦掉灰尘。湿度过大可发生触电危险。
• 确保将电源线连接至接地线。( 除非没有接地装置的设备。)
否则,您可能会触电或受到人身伤害 。
• 将电源线完全固定。
如电源线未完全固定,可能造成火灾。
• 确保电源线远离发热物体,如加热器。
否则可能造成火灾或者触电危险。
• 切勿将较重物体或产品放置于电源线上。
否则可能导致火灾或发生触电危险。
• 将建筑物内外之间的天线电视弄弯,防止雨水进入。
否则可能造成雨水流入产品,致使产生电击。
• 将电视机安装至墙面时,切勿将电视机电源线和信号线挂在电视机背面。
否则可能造成火灾或者发生触电危险。
安全指引
5
• 切勿将太多电器设备插在同一个多插孔电源插座。
否则可能会由于过热发生火灾事故。
• 连接外部设备时,切勿使产品跌落。
否则可能造成人身伤害或损坏产品。
• 将抗潮湿材料或包装材料置于儿童无法触及的地方。
吞食抗潮湿材料,会对身体造成伤害。如不慎吞食,应强迫吞食者将其吐出来并
就近就医。另外,塑料包装材料会造成窒息。
应将材料置于儿童无法触及的地方。
• 切勿将儿童攀爬到电视机上或抱住电视机。
否则电视机可能翻倒,从而造成严重伤害。
• 请小心处理废旧的电池以防止儿童误食。
若不慎误食,请尽快就医。
• 切勿将易燃物储存在产品附近。
否则可能由于易燃物处理不当,发生爆炸或火灾。
• 切勿将金属物体,如硬币、发夹、筷子、或电源线投入产品中。儿童应尤其注意。
可能发生触电、火灾或者人身伤害。
如异物掉到产品中,拔开电源线并联系服务中心。
• 切勿向产品泼水或用易燃物 ( 稀释剂或苯 ) 擦洗产品。
否则可能发生火灾或触电事故。
• 切勿使产品遭冲击震动或让任何物体掉到产品中或使任何物体掉到荧幕上。
否则会造成人身伤害或使产品造成损失。
• 切勿在打雷或闪电暴风期间触摸本产品或天线。
否则可能造成触电。
• 出现煤气泄漏时切勿触摸壁装电源插座,同时打开窗户通风。
否则可能造成火灾或被火花烧伤。
粤语
• 电源线一端连接至墙上的输入接线柱时,切勿将导体 ( 如金属块 ) 插至另一端。另外,
将电源线与墙上的输入接线柱接通后,切勿触摸电源线,否则可造成触电危险。
( 视型号而定。)
6
安全指引
• 切勿私自拆卸、维修或修改产品。
否则可能造成火灾或触电事故。
联络服务中心对产品进行检查、校准或修复。
• 如出现以下任一情况,请立即断开产品电源线并立即联络当地服务中心。
» 产品受到冲电击影响。
»产
品受到损坏。
»产
品进入异物。
»产
品冒烟或出现火灾。
可能造成火灾或电击。
• 如果长期不使用产品,将产品电源线断开。覆盖灰尘可能造成火灾或者绝缘老化
可能造成漏电、触电或火灾。
• 请勿将设备暴露在油滴或喷雾中,不要将装水的容器(如:花瓶)放置在设备上。
注意
粤语
• 将产品安装在没有无线电波的地方
• 室外天线与电源线之间应有充分间距,以防天线落下时室外天线与电源线解除。
如两者接触,则会导致触电。
• 禁止将产品安装在不固定的搁架或倾斜面上。并且避免将产品放置在震动或不能
完全支撑产品的地方。
否则,产品会跌落,造成损伤。
• 如果您打算将产品安装在置物台上,则需采取措施避免产品翻转。
否则,产品会跌落,造成损伤。
• 如果将产品安装在墙内,则需在产品背面贴上标准 VESA 安装介绍(可选部分)。如果采用挂架
(可选部分),则需要仔细安装,避免产品掉落。
• 只可采用制造商制定的附属装置 / 配件。
• 安装天线时,应该咨询合格技术人员。
这可能造成火灾或电脑隐患。
安全指引
7
• 我们建议您在看电视时,至少保持距电视机荧幕 5 到 7 倍荧幕对角线的长度。
如果长时间看电视会引起视觉模糊。
• 只可采用指定电池。
否则,则易损坏遥控器
• 禁止新旧电池混合使用。
否则会导致电池过热或电池液体损坏。
• 确保遥控器和其他测感器之间没有异物。
• 遥控器信号可能会受到太阳光或其他强光的影响。
所以,请调暗屋内光线。
• 当连接外部设备 ( 如:电子游戏控制台 ) 时,确保连接线足够长。
否则,产品易翻倒,容易造成损伤或损坏。
• 请遵照以下安装指南,以免产品过热。
»墙
面和产品之间的距离至少为 10cm。
»禁
止将产品安装在不通风的地方。(如:书架或橱柜)。
»禁
止将产品安装在地毯或垫子上。
»确
保通风口没有被桌布或窗帘遮挡。
否则,可能会引起火灾。
• 注意不要触摸通风口,因为电视开太久,通风口可能会变得比较热,但这并不会影
响产品的运行或性能。
• 定期检查电器线缆,如发现其外表已损坏或老化,应拔掉该线缆,停止使用该电器,并由合格人员
替换该线缆。
• 避免灰尘聚集在电源插头的插销或插孔上。
否则会发生火灾隐患。
• 确保电源线外观不受损坏且不受机械性损伤,如:弯曲、扭结、挤压、门压或踩踏。
特别需注意插头、壁装电源插座以及电器出线处。
粤语
• 禁止透过从壁装电源插座上拔插产品电源插头的方式开关产品。(禁止将电源插头
用作开关。)
这样做可能会导致机械事故或触电。
8
安全指引
• 禁止用手或其他锋利的物体 , 如:指甲、铅笔或钢笔用力按在面板上,禁止在面板
上留下任何刮痕。
• 避免触摸荧屏或将手指长时间对着荧幕。这样可能会对荧幕造成一些临时的失真效
应。
• 当清洗产品及其部件时,首先拔掉电源,然后用一张软布进行擦洗。不得使用玻璃
清洁液、汽车或工业发光体、研磨材料或蜡、苯、酒精等。这些均可能损坏产品及
其面板。
否则,也可能引起火灾、触电、或产品损坏(变形、腐蚀或破损)。
• 只要该装置连接上 AC 壁装电源插座,即使您通过开关关掉该装置,也无法从 AC 电源处断开。
• 当拔掉缆线时,需抓住插头,然后再拔掉。
如电源线内部的线断开,则易引起火灾。
粤语
• 在移动产品时,确保未翻转缆线、天线缆线以及所有连接缆线。
否则,可能会损坏这些缆线,引发火灾或触电。
• 在移动或拆卸产品时,因产品过重,所以需两人一组进行移动或拆卸。
否则会造成损失。
• 联络服务中心(每年一次)对产品的内部件进行清洗。累积的灰尘可能会引起机械
故障。
• 当仪器受损时,如:电源线或插头受损,液体溢出或有杂质掉入仪器、仪器遭雨水
冲洗或受潮,且不能正常运作或已经脱落时,需安排人员进行维修。
• 如果产品摸起来感觉很冷,当打开时有一丝丝的「闪烁」,属于正常现象,实际上
产品本身没有问题。
• 面板属于高科技薄膜液晶体产品,具备 200 万到 600 万像素的清晰度。您可能会看
到微小的黑点或彩色点(红、蓝或绿色)(显示出现故障),但这不会影响产品
的性能和可靠性。该现象同样还出现在第三方产品上,所以不予更换或退款。
安全指引
9
• 面板取决于您收看的位置(上 / 下 / 左 / 右)。
因面板所具有的特性,所以才会出现此类现象。这跟产品的性能没有关系,也不属
于什么故障。
• 长时间显示静态影像(如:广播频道标志、荧幕功能表、视屏游戏场面)可能损坏荧幕,留下影像痕迹,
也就是所谓的影像残留。产品的保修范围不包括有影像残留的产品。观看静态影像的时间不得超过 1
小时。
还有,如果您长时间观看比率为 4:3 的电视,影像残留现象可能会出现在面板的周边。
这一现象同样出现在第三方产品,所以不予更换或退款。
• 生成的声音
「噼噼啪啪」噪音 : 因温度和湿度等原因,收看或关掉电视时出现的噼啪声是因塑料热收缩产生的。
会发生热变形的产品出现此类声音属于正常情况。电路来自一条高速开关电路,该电路供应大量产
品操作用的电流。该电路因产品的不同而有所不同。
生成的声音不会影响产品的性能和可靠性。
警告
观看环境
• 观看时间
观看 3D 影像时,每小时中花 5 - 15 分钟的时间来休息。长时间干看 3D 影像可能引起头疼,头晕,
疲劳及损伤眼睛。
患有光敏性癫症或慢性疾病的人员
• 当一些用户处于 3D 的动画空间或特殊的图案中,他们可能会患有光敏性癫症或其它不正常的症状。
• 孕妇或患有慢性疾病,例如 : 癫痫症, 心脏病,或血压疾病等,若您感觉恶心,请不要观看 3D 影像。
• 不建议患有立体视盲或立体异常的人员观看 3D 影像。否则可能产生重影或不适。
• 若您有斜视 ( 斜视眼 )、弱视 ( 弱视眼 ) 或 散光,因为双重影像的缘故,您可能在感觉上存在问题,
并且极易感觉疲劳 。建议此类人员观看时,要经常休息。
• 若您的双眼视力不同,请先矫正之后再观看 3D 电视。
粤语
观看 3D 影像 ( 仅 3D 模式 )
10
安全指引
需要中断或重新观看 3D 影像的症状
• 当您因缺乏睡眠,过度劳累或饮酒过多而感觉疲劳时,切勿观看 3D 影像。
• 当出现此症状时请停止使用、观看 3D 影像,并休息直至症状消失。
» 当症状持续不退请询问您的医生。此类症状包含 : 头痛,眼睛痛,头晕,恶心, 心悸 ,意识模糊,
不舒服,重影,视觉变化或疲劳。
观看环境
• 视距
观看 3D 影像时,至少保持电视萤幕对角线尺寸 2 倍的距离。 观看 3D 影像时,若您感觉不适,请远
离电视。
观看者年龄
• 幼儿、儿童
禁止5岁以下儿童观看3D影像。
因为他们的视力还在发育当中,所以10以下儿童可能会反应过度,并出现过度兴奋(例如:试图碰触
萤幕或试图跳到上面。) 儿童需要在监护人的监护下观看3D影像。
儿童比成年人观看到的3D影像差异较大。因为他们双眼的距离比成年的短。因此对同样的3D影像,
他们感知立体的程度比成年人更深。
粤语
• 青少年
因为 3D影像的刺激,19岁以下的青少年可能会有敏感的反应。
建议他们避免长时间观看3D影像当他们疲劳的时候。
• 中年人员
与年轻的人员相比,中年人员感知3D的影响较小。切勿靠近电视机的距离小于建议的距离。
使用 3D 眼镜时的注意事项
• 请确保使用的是LG的3D眼镜。否则您可能不能正常的观看3D影像。
• 切勿使用3D眼镜替代矫正眼镜、太阳镜或防护眼镜。
• 使用改良后的3D眼镜可能导致眼睛过度疲劳或影像重影。
• 切勿将3D眼镜放置在过热或过冷的环境中。 否则会导致变形。
• 3D眼镜易碎,并且极易出现刮痕。因此应使用柔软干净的布擦拭眼镜。 切勿使用锋利的物体刮划3D
眼镜或使用化学剂擦拭眼镜。
组装和准备
11
注
•
•
•
•
•
显示的图像可能与电视机有所不同。
电视机的 OSD ( 萤幕菜单 ) 可能与本手册中显示的有所不同。
可用功能表和选项也可能不同于您目前正使用的输入源或产品型号。
在不久的将来,此系列的电视中可能还会融入新的产品功能。
为了减少电源损耗,电视可以以待机模式放置。并且在没有人观看的情况下,您可以关闭电视,这
样可以减少能源损耗。
• 若降低萤幕亮度,则可以明显的减少电视机功耗,并且可以减少总能耗。
安装顺序
1 打开包装箱,确认包含所有附件。
2 将底座安装到电视机上。
3 连接外部设备到电视机上。
4 确认网络连接是可用的。
只有在建立网络连接后,您才能使用电视机的网络功能。
组装和准备
粤语
附件
检查您的包装箱内是否有以下物品。
如果缺少附件,请联络您购买产品的当地经销商。
本手册中的图例可能会与实际产品和物品有差异。
注意
• 请勿使用未经核准的物品,以确保安全和产品使用寿命。
• 因使用未经批准的物品而造成的任何损坏或伤害,都不在保修范围之内。
注
• 与产品随附的一些物品,可能会因型号的不同而有所分别。
• 如产品功能升级,可能会在未事先通知的情况下,对产品或本手册中的内容进行更改。
• 如想达到最佳连接效果,HDMI 缆线 和 USB 设备厚度不超过 10 mm,宽度不超过 18 mm。
如果是 USB 缆线和 USB 记忆体则使用支援 USB2.0 的延伸缆线。
B
B
A
A
*A ≤ 10 mm
*B ≤ 18 mm
12
组装和准备
底座支架 / 底座
( 仅 32/42LM6690)
机身
底座支架 / 底座
( 仅 47/55LM6700)
ENERGY AV MODE INPUT
TV
SAVING
12
3
45
6
78
LIST
9
0
FLASHBK
MARK
FAV
VOL
3D
CH
P
A
G
E
M4 x 20
8个
MUTE
MENU INFO
Q.MENU
ENTER
BACK
EXIT
L/R SELECT
FREEZE
RATIO
遥控器和电池 (AAA)
用户手册
底座安装螺丝
P
粤语
底座固定螺钉
( 仅 32/42LM6690)
清洁布
( 使用此清洁布前框上的灰尘。)
神奇遥控器 ,电池 (AA)
复合视频缆线
色差视频缆线
×4个
3D 眼镜
组装和准备
13
另购产品
另购的产品可为了改进而进行修改 , 并不予通知。
如要购买这些物品请联系您的经销商。
这些产品只在某种型号下才可使用。
3D 眼镜 ( 根据您的需要,您可
以购买更多的 3D 眼镜 )
壁挂支架
LSW200BX,LSW200BXG
( 见 P20 )
粤语
壁挂支架
LSW400BX,LSW400BXG
( 见 P20 )
双人游戏眼镜
14
组装和准备
零件和按键
注
•
•
•
请勿使用未经核准的物品,以确保安全和产品使用寿命。
因使用未经批准的物品而造成的任何损坏或伤害,都不在保养范围之内。
一些型号上的萤幕上贴有薄膜,请勿将其撕除。
萤幕
按键
OK
SETTINGS
INPUT
粤语
WiFi 接收器
扬声器
遥控感应器和智能感应器 1
神奇遥控器感应器
触控按键
电源指示灯 ( 待机灯 )
说明
频道选择。
调整音量大小。
OK
确定所选操作。
SETTINGS
进入主选单,保存您的输入源或退出选单。
INPUT
改变输入源。
/I
开启或关闭电源。
1 智能感应器 - 根据周围环境调节背光度。
注
• 通过选择主选单中的其他选项,您可以设置待机灯开启或关闭。
组装和准备
抬起和移动电视机
15
• 至少由 2 人来搬运一部大电视机。
• 用手搬运电视机时,按照下图所示搬运电视机。
在抬起和移动电视机时,请阅读下列事项,以
免造成电视机刮伤或损坏,并按其型号大小进
行安全运输。
注意
任何时候都要避免碰触萤幕,否则可能会损
坏萤幕。
• 我们建议将电视机放进原本的包装箱或者包
装材料中再做移动。
• 在抬起和移动电视机之前,应拔掉电源线和
所有缆线。
• 在抓握电视机时,萤幕应背对着您以免损坏。
• 在搬运电视机时,请勿使电视机剧烈摇晃或过
分震动。
• 在搬运电视机时,使电视机保持竖直。
请勿翻转电视机,或将其向左向右倾斜。
• 无论什么时候搬运电视机,保护垫应该在电视
机两侧。( 除 32LM6690)
保护垫
粤语
• 牢牢抓住电视机框的顶部和底部。切勿抓住
透明部位、扬声器或者扬声器底部区域。
16
组装和准备
装配电视机
将您的电视机安装到底座支架上并且放置到桌子上或安装到墙壁上。
连接底座
如果您不打算将电视机安装到墙壁上,请按照下列顺序安装底座。
32LM6690
1
3
M4×20
底座支架
4个
前
粤语
底座
M4×20
俯视图
4个
2
注意
• 将底座安装到电视机时,放置一块泡沫垫
或者柔软保护布于表面,以免萤幕损坏。
确保没有物体压在萤幕上。
• 扭紧螺丝以免电视机向前倾斜,但不能过
度扭紧。
注
在电视机安装到墙壁之前将底座按照相反
顺序从电视上卸除。
组装和准备
17
42LM6690
1
4
M4×20
底座支架
4个
前
底座
俯视图
M4×20
4个
2
包装袋
粤语
5
保护垫
3
注意
• 将底座安装到电视机时,放置一块泡沫垫
或者柔软保护布于表面,以免萤幕损坏。
确保没有物体压在萤幕上。
• 扭紧螺丝以免电视机向前倾斜,但不能过
度扭紧。
注
在电视机安装到墙壁之前将底座按照相反
顺序从电视上卸除。
18
组装和准备
47/55LM6700
4
1
M4×20
底座支架
4个
前
M4×20
4个
底座
5
保护垫
俯视图
粤语
2
包装袋
注意
• 将底座安装到电视机时,放置一块泡沫垫
或者柔软保护布于表面,以免萤幕损坏。
确保没有物体压在萤幕上。
• 扭紧螺丝以免电视机向前倾斜,但不能过
度扭紧。
3
注
在电视机安装到墙壁之前将底座按照相反
顺序从电视上卸除。
组装和准备
19
台式安装
旋转底座
1
调整电视机角度以适宜观看。
您可以在 20±2 度范围内左右手动旋转底座以达到
最佳观看视角。
抬起并将电视机倾斜至直立位置,放在桌子
上。
- 与墙壁间留出 10 cm ( 最小 ) 空间,用于适
当通风。
( 仅 32/42LM6690 适用 )
20o±2o
20o±2o
10 cm
10 cm
2
m
10 c
10 cm
将电源线连接至壁装电源插座。
您可以在 10±2 度范围内左右手动旋转底座来以达
到最佳观看视角。
( 仅 47/55LM6700 适用 )
注意
请勿将电视机靠近或放置于热源之上,否则
可引致火灾或者发生损坏。
10o±2o
10o±2o
粤语
将电视机固定到桌子上
( 仅 32/42LM6690 适用 )
将电视机固定在桌子上,以免前倾、损坏和潜
在伤害。
将电视机安装在桌子上,并在底座背部插入和
扭紧随附的螺钉。
注
当您调整产品角度时,注意你的手指被损伤。
- 如果手臂或手指被夹到可能会导致人身伤害。
如果产品倾斜严重,可能会引起倾倒,导致
损伤或伤害。( 仅 47/55LM6700)
警告
为了防止电视机翻倒,应根据安装指南,将
电视机牢固地连接至地板 / 墙壁。倾翻、摇
晃或摇摆电视机可能会引起伤害。
< 背面 >
< 前面 >
20
组装和准备
壁式安装
将电视机固定至墙壁上
(此功能不是所有型号都适用。)
小心地将可选壁挂支架安装在电视机后部,并
将壁挂支架安装在与地面垂直的实体墙上。
如打算连接电视机至其他建筑材料上,请联络
符合资格的操作人员。
LG 建议由专业安装人员帮助您安装壁挂支架。
10 cm
10 cm
铰接螺栓
10 cm
螺钉 挂墙支架
粤语
1. 在电视机背面插入并扭紧铰接螺栓。
- 如果在铰接螺栓位置已插有螺钉,先将螺
钉拆下。
2. 利用螺钉将挂墙支架安装至墙壁上。
- 使支架和电视机后部铰接螺栓的位置相配。
3. 用坚固的绳子紧紧连接铰接螺栓和挂墙支架。
- 确保绳子与平面保持水平。
注意
确保儿童不会攀爬或悬吊在电视机上。
10 cm
确保使用符合 VESA 标准的螺丝和壁挂支架。
壁挂支架的标准尺寸见下表。
另购产品 ( 壁挂支架 )
型号
32LM6690
VESA
标准螺丝
200 x 200
M6
螺丝的数量 ( 个 )
4
壁挂支架 ( 可选的 ) LSW200BX,
LSW200BXG
注
使用足够牢固和足够大的平台或电视柜来牢
固支撑电视机。
型号
42LM6690
47/55LM6700
VESA
标准螺丝
螺丝的数量 ( 个 )
壁挂支架 ( 可选的 )
400 x 400
M6
4
LSW400BX,
LSW400BXG
组装和准备
注意
• 首先切断电源,然后再移动或安装电视机,
否则可能会触电。
• 如果在天花板或歪斜的墙壁上安装电视机,
电视可能会坠落和导致严重伤害。应使用经
授权的 LG 壁挂支架,并且联络本地经销商
或符合资格的操作人员。
• 请勿过度扭紧螺丝,否则会对电视机造成伤
害,并且会令保养无效。
• 使用符合 VESA 标准的螺丝和壁挂支架。 错
误使用或使用错误附件造成的损伤和伤害,
不在保养范围内。
21
整理缆线
( 仅 32/42/LM6690)
1. 用缆线固定夹集拢和捆绑缆线。
缆线固定夹
注意
注
( 仅 47/55LM6700)
1. 用缆线管理器集拢和捆绑缆线。
2. 将缆线管理器固定在电视机上。
缆线固定夹
缆线管理器
注意
不要通过握住缆线固定夹移动电视,因为
缆线可能会断裂,引起电视的损坏和损害。
粤语
• 使用列于 VESA 标准螺丝规范上的螺丝。
• 完整的壁挂支架包含安装手册和必要的零件。
• 壁挂支架是可选物品。您可以从当地经销商
处购买附件。
• 螺丝的长度因挂架不同而不同。确保使用正
确长度的螺丝。
• 如欲获取更多资讯,请查阅壁挂支架随附的
手册。
不要通过握住缆线固定夹移动电视,因为
缆线可能会断裂,引起电视的损坏和损害。
22
建立连接
建立连接
连接不同的外部设备至电视机,转换输入模式以选择一个外部设备。欲获取外部设备连接的更多资讯,
可以查阅每台设备随附的手册。
可用外部设备是:硬碟接收器,DVD 播放器,录影机,音频系统,USB 存储设备,个人电脑,游戏设备,
和其他外部设备。
注
• 外部连接设备因型号不同而有所分别。
• 不考虑电视接口顺序,将外部设备连接至电视机上。
• 若您在一部 DVD 录影机或录影机上录下电视节目,确认将电视机信号输入经一部 DVD 录影机或
录影机连接至电视机上。欲获取更多录影资讯,查阅所连接设备随附的手册。
• 请查阅外部设备手册获取使用说明。
• 如果您连接一部游戏设备至电视上,需使用与游戏设备随附的缆线。
• 在个人电脑模式中,调整解像度、垂直模式、对比度或亮度时可能会发出噪声。如果噪声持续存在,
请改变个人电脑输出到另一个解像度,将刷新频率调到另一种刷新频率或在“影像”菜单上调整
亮度和对比度,直至影像显示清楚。
• 在个人电脑模式中,依据显卡的不同一些分辨率设置可能不能正常工作。
粤语
天线 / 有线连接
使用 RF 缆线 (75Ω) 将电视机连接至墙壁天线端口。
注
•
•
•
•
一个讯号分配器可以用于 2 部或以上电视机。
如果画质较差,安装一个讯号放大器可以改善画质。
如果画质较差,则调整天线使其朝向正确方向。
天线和转换器并不随产品提供。
IN
ANTENNA CABLE
建立连接
HDMI 连接
从一部外部设备传输数码视频和音频讯号至电
视机。按照下图所示,使用 HDMI 缆线连接外
部设备与电视机。
23
ARC (Audio Return Channel)
• 支持 SIMPLINK 和 ARC 的外部音频设备必
需连接至 HDMI 输入 1(ARC) 接口。
• 当连接高速 HDMI 缆线时,支持 ARC 的外
部音频设备输出光学 SPDIF(无需音频缆
线),并支持 SIMPLINK 功能。
IN
3
4 (PC)
选择任意一个 HDMI 输入接口进行连接。
您可以使用任何一个输入接口。
(* 没有提供 )
HDMI
注
• 为获取最佳图像质量,我们建议使用 HDMI
连接。
• 使用带有 CEC(用户电子控制装置)功能的
最新高速 HDMI ™ 缆线 。
• 测试高速 HDMI ™ 缆线经能否传输 1080p 及
以上的 HD 信号。
• 支持的 DTV 音频 : MPEG, Dolby Digital。
• 支持的 HDMI 音频格式:Dolby
(/88k/96k/176k/192k, 不支持 DTS )
粤语
1(ARC)
2
DVD/ 蓝光光碟 / HD 缆线盒
/ HD 机顶盒 / 个人电脑
24
建立连接
DVI 与 HDMI 连接
RGB-PC 连接
从一部外部设备传输数码讯号至电视机。按照
下图所示,使用 DVI-HDMI 缆线连接外部设备
和电视机。欲传输音频讯号,连接一个音频缆线。
从您的个人电脑传输视频讯号至电视机。欲传
输音频讯号,连接一个音频缆线。
4 (PC)
选择任意一个 HDMI 输入接口进行连接。
您可以使用任何一个输入接口。
3
(PC)
(RGB/HDMI-PC)
AUDIO
2
IN
RGB
IN
IN
(* 没有提供 )
AUDIO
1(ARC)
(RGB/HDMI-PC)
粤语
(* 没有提供 )
RGB OUT (PC) AUDIO OUT
个人电脑
AUDIO OUT
DVI OUT
DVD/ 蓝光光碟 / HD 缆线盒 / 个人电脑
注
• 视具体显卡而定,如果使用 DVI 缆线连接
HDMI,则 DOS 模式可能无法正常运行。
• 建议连接 DVI-HDMI 至 HDMI IN 4 接口。
建立连接
25
色差连接
复合连接
从一部外置设备传输模拟视频和音频讯号至电
视机。按照下图所示,使用色差视频缆线连接
外部设备与电视机。
从一部外置设备传输模拟视频和音频讯号至电
视机。按照下图所示,使用复合视频缆线连接
外部设备与电视机。
IN
AV
VIDEO
PR
AV
Y
绿
黄
VIDEO
( 使用提供的色差
视频缆线。)
( 使用提供的复合
视频缆线。)
COMPONENT
PR
Y
红
白
红
白
绿
蓝
红
红
白
(* 没有提供 )
(* 没有提供 )
红
白
黄
绿
蓝
红
红
白
L
PB
黄
黄
DVD/ 蓝光光碟 /
HD 缆线盒 / 个人电脑
AUDIO
黄
绿
蓝
红
红
白
黄
DVD/ 蓝光光碟 /
HD 缆线盒 / 个人电脑
PB
粤语
( 使用提供的复合
视频缆线。)
IN
COMPONENT
AUDIO
R
AUDIO
VIDEO
VIDEO
L ( MONO ) AUDIO R
注
• 如果缆线安装错误,画面可能以黑白或者失
真颜色显示。
注
• 如果您有一个单声道录影机,请将音频缆线
从录影机连接到音频 L/MONO 单声道插孔。
26
建立连接
音频连接
USB 连接
您可以使用配置的外部音频系统替代电视机内置
的扬声器。
连接一个 USB 存储设备,例如 USB 快闪存储
卡读卡器至电视机,并进入 Smart Share 选单
使用不同的多媒体档案。
注
USB IN
3 USB Apps
• 如果您使用配置的外部音频系统替代内置
扬声器,请将电视机的扬声器设置为关闭。
数字光学音频连接
USB IN
1 HDD IN 2 USB Hub
从电视机传输数码音频讯号至一个外部设备。
按照下图所示,使用光学音频缆线连接外部设备
和电视机。
粤语
OUT
OPTICAL
DIGITAL
AUDIO
(* 没有提供 )
USB 设备
(* 没有提供 )
OPTICAL AUDIO IN
数字音频系统
注
• 切勿直视光学输出接口。
盯着激光束会损伤您的视力。
• 具有 ACP ( 音频复制保护 ) 功能的音频可能
限制数字光学音频的输出。
注
• 使用 USB 集线器设备,确保改设备已连接至
USB IN 2 的 USB 集线器连接口。
• 将应用程序存储在 USB 设备上,确保该设备
已连接至 USB N 3 的 USB 应用接口。
• 若您的 USB 需要外部电源,请进行连接。
遥控器
27
遥控器
此说明书中的描述依据遥控器的实际按键。
请仔细阅读此说明书,并正确使用电视。
如要更换电池,先打开电池盖,按照电池盒内部标识所示的正负极相匹配更换电池
(1.5 V AAA),最后合上电池盖。
如要取下电池,请按照相反步骤进行。
注意
• 请勿将旧电池和新电池混用,否则可能导致遥控器损坏。
请确保将遥控器指向电视机上的遥控感应器。
RATIO
1
2
3
INPUT
TV/RAD
数字按钮
LIST
Q.VIEW
4
5
6
+
7
8
9
LIST
0
Q.VIEW
RATIO INPUT
TV/
RAD
MUTE
SETTINGS
HOME
PAGE
进入您所喜爱的节目清单。
观看3D影像。
关闭或打开声音。
跳至上或下一个画面。
P
选择某个节目频道。
3D
MUTE
FAV
P
-
FAV
P
A
G
E
SETTINGS
进入设置选单。
进入主菜单。
进入我的应用界面。
选择菜单或选项。
HOME
MY APPS
MY APPS
导航按钮
(上/下/左/右)
OK
选择选单或选项,并且确认您的输入。
OK
返回上一级。
(返回)
GUIDE EXIT
GUIDE
显示节目指南。
清除全部萤幕显示,并且返回收看电视。
通过这些按钮可访问某些功能表上的特殊功能。
这些按钮可用于文字电视广播。
EXIT
彩色按钮
SUBTITLE
TEXT
LIVE TV
T.OPT
Q.MENU
Q.MENU
REC
ENERGY
SAVING
TEXT/T.OPT
INFO
INFO
进入快捷菜单。
数码模式时选择想要的字幕。
返回到实时广播电视。
控制我的媒体选单或者SIMPLINK 兼容设备(USB 或
SIMPLINK 或 DVR)。
用来调整 DVR 菜单。
调整萤幕亮度以降低能源消耗。
查看目前节目和萤幕信息。
SIMPLINK
查看与电视机连接的AV设备。开启SIMPLINK菜单。
SUBTITLE
LIVE TV
控制按钮
(
)
REC
ENERGY SAVING
粤语
将电视机开启或待机状态。
查阅用户指南。
调整图像大小。
改变输入源,打开电视。
选择Radio, TV和 DTV频道。
输入数据。
进入所存储的节目清单。
返回上一个所收看的节目。
调整音量大小。
(电源)
? (用户指南)
28
遥控器
神奇遥控器
当显示“神奇遥控器电池电量低,请更换电池。”的讯息时,请更换电池。更
换电池步骤:打开神奇遥控器后盖,按照电池盒内部标识所示的正负极相匹配
更换电池 (1.5 V AA),合上电池后盖。
确保将遥控器指向电视机上的神奇遥控器感应器。
欲拆卸电池,请按照相反步骤进行。
指标接收器 (RF 发射器 )
运行时,此灯会闪烁。
( 电源 )
开启或关闭电源。
HOME( 主页 )
进入主选单。
BACK( 返回 )
返回到上一级。
BACK
HOME
导航键 ( 上 / 下 / 左 / 右 )
选择菜单或选项。
粤语
滚轮(确定)
选择菜单或选项并确认您的输
入。在已保存的频道中滚动。
如果您在移动指标时按导航
键,指标就会消失,神奇遥控
器如同一般遥控器一样。如果
想再次显示指标,请向左向右
摇晃神奇遥控器。
P
+
调节音量大小。
P
选择已保存的节目或频道。
( 静音 )
打开或关闭声音。
MY APPS
MY APPS( 我的应用 )
显示我的应用列表。
3D
观看 3D 影像。
1
TV
11-1 Brief Info Title Test...
11:40AM
i Info.
2
1 如果您按神奇遥控器上的 (滚轮)键,将会显示萤
幕信息。显示的信息有实时节目和画面。
2 如果您按神奇遥控器上的 (滚轮)键, 将会显示萤
幕信息。设置您想要的频道。您可以按神奇遥控器上的
P
键设置频道。
遥控器
登记神奇遥控器
神奇遥控器与您的电视机配对 ( 登记 ) 后即可使
用。
如何登记神奇遥控器
1 自动登记神奇遥控器,打开
电视机并按 (滚轮)键。
登记完成后,在萤幕上将会
出现完成信息。
2 如果登记失败,关闭电视机。
并重启,按 (滚轮)键完
成登记。
如何再次登记神奇遥控器
如何使用神奇遥控器
1 若您的电视机萤幕上没有指标,
轻轻地向左向右晃动遥控器。
然后,指标将会自动地出现在
萤幕上。
» 指标如果一段时间内未予使
用,就会消失。
2 您可以将遥控器上的指标接收
器对准电视机,然后上下左右
移动,从而移动指标。
» 如果指标未能正常工作,则将
遥控器暂且搁置 10 秒,然后重
新使用。
使用神奇遥控器时的注意事
项
• 在最大通讯距离(10 米)之内使用遥控器。
超出此距离使用遥控器或者有物体阻拦时,
可能会造成通讯故障。
• 在其他装置附近使用,可能会造成通讯故障。
例如微波炉或网络区域网络产品等电器可能
会造成干扰,因为会使用神奇遥控器相同的
频宽 (2.4GHz)。
• 如果神奇遥控器掉落或者收到很大冲撞,则
可能会遭到损坏或者发生故障。
• 使用神奇遥控器时,小心不要使其撞到附件
的家具或其他人。
• 由于相关的无线设备可能会出现电波干扰,
制造商和安装者不能提供与人身安全相关的
服务。
• 建议接入点(AP)应该设置在距离电视机
1 米之外的地方。如果 AP 与电视机之间的
距离小于 1 米,神奇遥控器可能由于频率干
扰而不会如预期一样工作。
粤语
1 同时按住
BACK( 返回 )
BACK( 返回 )
和
HOME( 主页 ) 键约 5
秒钟,使遥控器重设,然后
按照“如何登记神奇遥控器”
进行登记。
HOME( 主页 ) 2 再次登记神奇遥控器,对准
电视按 BACK( 返回 ) 键
约 5 秒钟 。登记完成后,在
萤幕上将会出现完成信息。
29
30
使用指南
使用“使用指南”
使用“使用指南”,您可以容易地获取电视的详细资讯。
使用遥控器
您可以按遥控器上的
按钮 ( 使用指南 ) 访问电视机内的使用指南。
使用神奇遥控器
1 轻轻摇晃神奇遥控器,按 HOME( 主页 ) 键。
2 选择“设置”,并按
(滚轮)按钮。
3 移动神奇遥控器光标至支援。
4 选择使用指南,并按
(滚轮)按钮。
粤语
维护 / 疑难排解
31
维护
清洁电视机
定期仔细清洁,可延长电视机的使用寿命。
萤幕,边框,前框和底座
• 使用干净、清洁和柔软的表面来去除灰尘或轻垢。
• 用在清水或洗涤剂中浸湿的软布表面擦拭污垢,然后立即用干布擦拭。
注意
• 避免长时间按压萤幕,因为这样可能损伤萤幕。
• 请勿用您的手指或锋利物体来推、摩擦或创击表面,因为这会造成萤幕上出现刮痕以及图像失
真。
• 请勿使用任何化学剂,因为可能会损伤电视机表面。
• 请勿将液体喷射到电视机表面。如果水分进入电视机,就可能会引发火灾、触电或故障。
粤语
电源线
定期清理电源线上积聚的灰尘或污垢。
疑难排解
问题
不能用遥控器控制电视
机。
解决方法
• 检查产品上的遥控感应器,然后再试。
• 检查产品和遥控器之间是否有障碍物。
• 检查电池是否仍然工作并且正确安装 (
对
,
对
)。
没有图像显示和没有声
音。
• 检查产品是否开机。
• 检查电源线是否连接至墙身插座。
• 连接其他产品,以检查墙身插座是否存在问题。
电视机突然关机。
• 检查电源控制设定。供电可能中断。
• 检查时间设定中是否启动睡眠时间设定功能。
• 若电视机开启时没有信号,则在 15 分钟之后电视机自动关机。
32
产品规格
产品规格
型号
项目
产品尺寸
连底座
( 宽 × 高 × 深 ) 不连底座
产品质量
连底座
不连底座
电源
型号
项目
产品尺寸
连底座
( 宽 × 高 × 深 ) 不连底座
产品质量
连底座
不连底座
电源
粤语
型号
项目
环境状况
32LM6690
42LM6690
719.0×498.0×230.0 mm
719.0×437.0×55.0 mm
9.5kg
7.9kg
AC 100-240V~50/60Hz
953.0×660.0×269.0 mm
953.0×566.0×55.0 mm
14.8kg
12.6kg
AC 100-240V~50/60Hz
47LM6700
55LM6700
1063.0×696.0×263.0 mm
1232.0×795.0×331.0 mm
1063.0×628.0×55.0 mm
17.5kg
15.3kg
AC 100-240V~50/60Hz
1232.0×723.0×55.0 mm
25.0kg
21.3kg
AC 100-240V~50/60Hz
32/42LM6690
47/55LM6700
运作温度
0oC 至 40oC
运作湿度
低于 80%
储放温度
-20oC 至 60oC
储放湿度
低于 85%
记下电视机的型号和序列号。
参考封底的标签并引用此资讯。
如需任何服务,请联络经销商。
型号:
序列号 :
OWNER'S MANUAL
LED LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
32/42LM6690
47/55LM6700
P/N:MFL63720136(1203-REV01)
www.lg.com
2
ITABLE OF CONTENTS
TABLE OF CONTENTS
3
LICENSES
30 Remote control
30 Magic Remote control
3
OPEN SOURCE SOFTWARE
NOTICE
31 MAINTENANCE
4
SAFETY INSTRUCTIONS
31 Cleaning your TV
31 - Screen,frame,cabinet and stand
31 - Power cord
11 INSTALLATION PROCEDURE
11 ASSEMBLING AND PREPARING
ENGLISH
11
13
14
15
16
16
19
20
21
Unpacking
Separate purchase
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
- Mounting on a table
- Mounting on a wall
- Tidying cables
22
MAKING CONNECTIONS
22
23
24
24
25
25
26
26
26
Antenna/Cable connection
HDMI connection
DVI to HDMI connection
RGB-PC connection
Component connection
Composite connection
Audio connection
- Digital optical audio connection
USB connection
27 REMOTE CONTROL
28 MAGIC REMOTE CONTROL
FUNCTIONS
29 Registering Magic remote control
29 How to use Magic Remote Control
29 Precautions to Take when Using the
Magic Remote Control
30 USING THE USER GUIDE
31 TROUBLESHOOTING
32 SPECIFICATIONS
WARNING
• If you ignore the warning message, you may
be seriously injured or there is a possibility
of accident or death.
CAUTION
• If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
• The note helps you understand and use the
product safely. Please read the note carefully
before using the product.
LICENSES
3
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-Dsymbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX video.
“DivX Certified® to play DivX® and DivX Plus® HD (H.264/MKV) video up to
1080p HD including premium content.”
“DivX®, DivX Certified®, DivX Plus® HD and associated logos are
trademarks of Rovi Corporation or its subsidiaries and are used under
license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol & DTS and the Symbol together are registered trademarks & DTS
2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS,
Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained
in this product, please visit http://opensource.lge.com.In addition to the source code, all referred
license terms, warranty disclaimers and copyright notices are available for download.
ENGLISH
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
4
IMPORTANT SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
• Do not place the TV and remote control in the following environments:
» A location exposed to direct sunlight.
» An area with high humidity such as a bathroom.
» Near any heat source such as stoves and other devices that produce heat.
» Near kitchen counters or humidifiers where they can easily be exposed to
steam or oil.
» An area exposed to rain or wind.
» Near containers of water such as vases.
Otherwise, this may result in fire, electric shock, malfunction or product
deformation.
• Do not place the product where it might be exposed to dust.
This may cause a fire hazard.
ENGLISH
• Mains plug is the disconnecting device. The plug must remain readily operable.
• Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or
covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
• Make sure to connect the power cable to the grounded current. (Except for
devices which are not grounded.)
You may be electrocuted or injured.
• Fix the power cable completely.
If the power cable is not fixed completely, a fire can break out.
• Ensure the power cord does not come into contact with hot objects such as a
heater.
This may cause a fire or an electric shock hazard.
• Do not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in fire or electric shock.
• Bend antenna cable between inside and outside building to prevent rain from
flowing in.
This may cause water damaged inside the Product and could give an electric
shock.
• When mounting a TV it on the wall, make sure not to install TV by hanging
power and signal cables on the back of the TV.
It may cause fire, electric shock.
IMPORTANT SAFETY INSTRUCTIONS
5
• Do not plug too many electrical devices into a single multiple electrical outlet.
Otherwise, this may result in fire due to over-heating.
• Do not drop the product or let it fall over when connecting external devices.
Otherwise, this may result in injury or damage to the product.
• Keep the packing anti-moisture material or vinyl packing out of the reach of
children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can
cause suffocation.
Keep it out of the reach of children.
• Do not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
• Dispose of used batteries carefully to protect a child from eating them.
In case that it eats them, take it to see a doctor immediately.
• Do not put or store inflammable substances near the product.
There is a danger of explosion or fire due careless handling of the inflammable
substances.
• Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the
product, or inflammable objects such as paper and matches. Children must pay
particularattention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.
• Do not spray water on the product or scrub with an inflammable substance (thinner
or benzene). Fire or electric shock accident can occur.
• Do not allow a impact shock or any objects to fall into the product, and do not
drop onto the screen with something.
You may be injured or the product can be damaged.
• Never touch this product or antenna during a thunder or lighting storm.
You may be electrocuted.
• Never touch the wall outlet when there is leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.
ENGLISH
• Do not insert a conductor (like a metal chopstick) into one end of the power cable
while the other end is connected to the input terminal on the wall. Additionally, do
not touch the power cable right after plugging into the wall input terminal.
You may be electrocuted. (Depending on model)
6
IMPORTANT SAFETY INSTRUCTIONS
• Do not disassemble, repair or modify the product at your own discretion.
Fire or electric shock accident can occur.
Contact the service center for check, calibration or repair.
• If any of the following occur, unplug the product immediately and contact your local
service centre.
» The product has been impacted by shock
» The product has been damaged
»F
oreign objects have entered the product
» The product produced smoke or a strange smell
This may result in fire or electric shock.
• If you don’t intend to use the product for a long time, unplug the power cable from
the product.
Covering dust can cause a fire, or insulation deterioration can cause electric ,
leakage, lectric shock or fire.
• Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
ENGLISH
CAUTION
• Install the product where no radio wave occurs.
• There should be enough distance between an outside antenna and power lines to
keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
• Do not install the product on places such as unstable shelves or inclined surfaces.
Also avoid places where there is vibration or where the product cannot be fully
supported. Otherwise, the product may fall or flip over, which may cause injury or
damage to the product.
• If you install the TV on a stand, you need to take actions to prevent the product
from overturning. Otherwise, the product may fall over, which may cause injury.
• If you intend to mount the product to a wall, attach VESA standard mounting interface (optional
parts) to the back of the product. When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
• Only use the attachments / accessories specified by the manufacturer.
• When installing the antenna, consult a qualified service man.
This may create a fire hazard or an electric shock hazard.
IMPORTANT SAFETY INSTRUCTIONS
7
• We recommend that you maintain a distance of at least 5 to 7 times the diagonal
screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
• Only use the specified type of battery.
This could cause damage to the remote control.
• Do not mix new batteries with old batteries.
This may cause the batteries to overheat and leak.
• Make sure there are no objects between the remote control and its sensor.
• Signal from the remote control may be disturbed by sun light or other strong light. In
this case, darken the room.
• Do not turn the product On/Off by plugging-in or unplugging the power plug to the
wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
• Please follow the installation instructions below to prevent the product from
overheating.
» The distance between the product and the wall should be more than 10 cm.
»D
o not install the product in a place with no ventilation (e.g., on a bookshelf or in
a cupboard).
»D
o not install the product on a carpet or cushion.
»M
ake sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
• Take care not to touch the ventilation openings when watching the TV for long
periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.
• Periodically examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
• Prevent dust collecting on the power plug pins or outlet.
This may cause a fire hazard.
• Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
ENGLISH
• When connecting external devices such as video game consoles, make sure the
connecting cables are long enough. Otherwise, the product may fall over, which
may cause injury or damage the product.
8
IMPORTANT SAFETY INSTRUCTIONS
• Do not press strongly upon the panel with a hand or sharp object such as nail,
pencil or pen, or make a scratch on it.
• Avoid touching the screen or holding your finger(s) against it for long periods of
time. Doing so may produce some temporary distortion effects on the screen.
• When cleaning the product and its components, unplug the power first and wipe it
with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).
• As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC
power source even if you turn off this unit by SWITCH.
• When unplugging the cable, grab the plug and unplug it.
If the wires inside the power cable are disconnected, this may cause fire.
ENGLISH
• When moving the product, make sure you turn the power off first. Then, unplug the
power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or
cause electric shock.
• When moving or unpacking the product, work in pairs because the product is
heavy. Otherwise, this may result in injury.
• Contact the service center once a year to clean the internal parts of the product.
Accumulated dust can cause mechanical failure.
• Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
• If the product feels cold to the touch, there may be a small “flicker” when it is turned
on. This is normal, there is nothing wrong with product.
•The panel is a high technology TFT product with resolution of two million to six
million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to exchange
or refund.
IMPORTANT SAFETY INSTRUCTIONS
9
• You may find different brightness and color of the panel depending on your viewing
position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related
with the product performance, and it is not malfunction.
• Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video
game) for a prolonged time may cause damage to the screen, resulting in retention of the image,
which is known as image sticking. The warranty does not cover the product for image sticking. Avoid
displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for
LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders
of the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
Viewing 3D Imaging (Only 3D models)
WARNING
Viewing Environment
• Viewing Time
When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long
period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
• Some users may experience a seizure or other abnormal symptoms when they are exposed to a
flashing light or particular pattern from 3D contents.
• Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as
epilepsy, cardiac disorder, or blood pressure disease, etc.
• 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly.
Doubleimages or discomfort in viewing may be experienced.
• If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have
trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent
breaks than the average adult.
• If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D
contents.
ENGLISH
• Generated Sound
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated
by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise
is generated from a high-speed switching circuit, which supplies a large amount of current to
operate a product. It varies depend-ing on the product.
This generated sound does not affect the performance and reliability of the product.
10
IMPORTANT SAFETY INSTRUCTIONS
Symptoms which require discontinuation or refraining from watching 3D contents
• Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
• When these symptoms are experienced, stop using/watching 3D contents and get enough rest until
the symptom subsides.
»C
onsult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,
dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or
fatigue.
Viewing Environment
• Viewing Distance
Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you
feel discomfort in viewing 3D contents, move further away from the TV.
Viewing Age
ENGLISH
• Infants/Children
Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring
and extra attention is required for children watching 3D contents.
Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.
• Teenagers
Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D
contents.
Advise them to refrain from watching 3D contens for a long time when they are tired.
• Elderly
The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the
recommended distance.
Cautions when using the 3D glasses
• Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
• Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
• Using modified 3D glasses may cause eye strain or image distortion.
• Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
• The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth
when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/
wipe them with chemicals.
ASSEMBLING AND PREPARING
11
NOTE
• Image shown may differ from your TV.
• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
• The available menus and options may differ from the input source or product model that you are
using.
• New features may be added to this TV in the future.
• The TV can be placed in standby mode in order to reduce the power consumption. And the TV
should be turned off if it will not be watched for some time, as this will reduce energy consumption.
• The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1
2
3
4
Open the package and make sure all the accessories are included.
Attach the stand to the TV set.
Connect an external device to the TV set.
Make sure the network connection is available.
You can use the TV functions only when the network connection is made.
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the
local dealer where you purchased your product. The illustrations in this manual may differ from the
actual product and item.
CAUTION
• Do not use any unapproved items to ensure the safety and product life span.
• Any damages or injuries by using unapproved items are not covered by the warranty.
NOTE
• The items supplied with your product may vary depending on the model.
• Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory .
B
B
*A ≤ 10 mm
*B ≤ 18 mm
A
A
ENGLISH
ASSEMBLING AND PREPARING
12
ASSEMBLING AND PREPARING
Site
Stand Body/Stand Base
(Only 32/42LM6690)
Stand Body/Stand Base
(Only47/55LM6700)
ENERGY AV MODE INPUT
TV
SAVING
12
3
45
6
78
9
LIST
0
FLASHBK
MARK
FAV
VOL
3D
CH
P
A
G
E
MUTE
MENU INFO
Q.MENU
ENTER
BACK
M4 x 20
EXIT
L/R SELECT
8 EA
FREEZE
RATIO
Remote control and
batteries (AAA)
Owner’s manual
Stand Screws
ENGLISH
P
Desk-mount Screw
(Only 32/42LM6690)
Polishing cloth
(Use this to remove dust from
the cabinet.)
Magic RemoteControl,
Batteries (AA)
Composite video cable
Component video cable
x4EA
Cinema 3D Glasses
ASSEMBLING AND PREPARING
13
Separate purchase
Optional extras can be modified for quality improvment without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
Cinema 3D Glasses
( According to your need, you
an purchase more 3D Glasses. )
Dual play glasses
ENGLISH
Wall Mounting Bracket
LSW400BX,LSW400BXG (See P20)
Wall Mounting Bracket
LSW200BX,LSW200BXG
(See P20)
14
ASSEMBLING AND PREPARING
Parts and buttons
NOTE
•
•
•
Do not use any unapproved items to ensure the safety and product life span.
Any damages or injuries by using unapproved items are not covered by the warranty.
Some models have a thin film attached on to the screen and this must not be removed
Screen
buttons
OK
SETTINGS
INPUT
ENGLISH
WiFi Receiver
Speakers
Magic remote control Receiver
Button
Remote control and intelligent1 sensors
Power indicator(Standby Light)
Description
Scrolls through the saved programmes
Adjusts the volume level
OK
Selects the highlighted menu option or confirms an input.
SETTINGS
Accesses the main menu, or saves your input and exits the menus.
INPUT
Changes the input source.
/I
Turns the power on or off.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding
environment.
NOTE
• You can set the power Standby Light to on or off by selecting OPTION in the main menus.
ASSEMBLING AND PREPARING
Lifting and moving the TV
15
• When transporting a large TV, there should be
at least 2 people.
• When transporting the TV by hand, hold the
TV as shown in the following illustration.
When moving or lifting the TV, read the
following to prevent the TV from being
scratched or damaged and for safe
transportation regardless of its type and size.
CAUTION
Avoid touching the screen at all times,
as this may result in damage to the screen.
• When transporting the TV, do not expose the
TV to jolts or excessive vibration.
• When transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
• Whenever you handle TV, Protection pad
should be covered with side of TV. (Except for
32LM6690)
Protection Pad
• Hold the top and bottom of the TV frame
firmly.Make sure not to hold the transparent
part, speaker, or speaker grill area.
ENGLISH
• It is recommended to move the TV in the
box or packing material that the TV originally
came in.
• Before moving or lifting the TV, disconnect
the power cord and all cables.
When holding the TV, the screen should
face away from you to avoid damage.
16
ASSEMBLING AND PREPARING
Setting up the TV
Put your TV on a pedestal stand and mount the TV on a table or wall.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
32LM6690
1
3
M4×20
Stand Body
4EA
Front
ENGLISH
Stand Base
Top View
M4×20
4EA
2
CAUTION
• When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
• Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten。
NOTICE
Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
ASSEMBLING AND PREPARING
17
42LM6690
1
4
M4×20
Stand Body
4EA
Front
Stand Base
M4×20
4EA
Top View
Wrapping bag
5
Protection pad
3
CAUTION
• When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
• Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten。
NOTICE
Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
ENGLISH
2
18
ASSEMBLING AND PREPARING
47/55LM6700
1
4
M4 x 20
4EA
Stand Body
Front
M4 x 20
Stand Base
4EA
Top View
Protection pad
ENGLISH
5
2
Wrapping bag
CAUTION
3
• When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
• Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten。
NOTICE
Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
ASSEMBLING AND PREPARING
19
Mounting on a table
Adjusting the angle of the TV to suit view
1
Adjusting the angle of the TV to suit view
Swivel 20±2 degrees to the left or right
and adjust the angle of the TV to suit your view.
(Only 32/42LM6690)
Lift and tilt the TV into its upright position
on a table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
2
20o±2o
20o±2o
10 cm
m
10 c
10 cm
Connect the power cord to a wall outlet.
CAUTION
10o±2o
10o±2o
Securing the TV to a table
(Only 32/42LM6690)
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.To
secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
NOTE
When adjusting the angle of the product,
watch out for your fingers.
Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much,
it may fall, causing damage or injury.
(Only 47/55LM6700)
WARNING
To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause
injury.
<Rear>
<Front>
ENGLISH
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Swivel 10±2 degrees to the left or right and
adjust the angle of the TV to suit your view.
(Only 47/55LM6700)
20
ASSEMBLING AND PREPARING
Securing the TV to a wall
Mounting on a wall
(This feature is not available for all models.)
Attach an optional wall mount bracket at the
rear of the TV carefully and install the wall
mount bracket on a solid wall perpendicular
to the floor.When you attach the TVto other
building materials,please contanct qualified
personnel.
LG recommends that wall mounting be
performed by a qualified professional installer.
10 cm
10 cm
eye-bolt
10 cm
bolt wall bracket
10 cm
ENGLISH
1. Insert and tighten the eye-bolt on the back
of the TV.
-If there are bolts inserted at the eye-bolt
position, remove the bolt first.
2. Mount the wall brackets with the bolt to the
wall.
-Match the location of the wall bracket and
the eye-bolt on the rear of the TV.
3. Connect the eye-bolt and wall bracket
tightly with a sturdy rope.
-Make sure to keep the rope horizontal with
the flat surface.
CAUTION
Make sure that children do not climb on or
hang on the TV.
NOTE
Use a platform or cabinet that is strong and
large enough to support the TV securely.
Make sure to use screws and wall mount
bracket that meet the VESA standard.
Standard dimensions for the wall mount kits
are described in the following table.
Separate purchase(Wall Mounting Bracket)
Model
32LM6690
VESA
200 x 200
Standard screw
M6
Number of screws(EA)
4
Wall mount bracket
(optional)
LSW200BX,
LSW200BXG
Model
42LM6690
47/55LM6700
VESA
400 x 400
Standard screw
M6
Number of screws(EA)
4
Wall mount bracket
(optional)
LSW400BX,
LSW400BXG
ASSEMBLING AND PREPARING
CAUTION
• Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
• If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
• Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
• Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
NOTE
Tidying cables
(Only 32/42LM6690)
1. Gather and bind the cables with the cable
holder.
Cable holder
CAUTION
Do not move the TV by holding the cable
holder , as the cable holders may break,
and injuries and damage to the TV may
occur.
(Only Only 47/55LM6700)
1. Gather and bind the cables with the Cable
Management.
2. Fix the Cable Mangement firmly to the TV.
Cable Holder
Cable Management
CAUTION
Do not move the TV by holding the cable
holder, as the cable holders may break,
and injuries and damage to the TV may
occur.
ENGLISH
• Use the screws that are listed on the VESA
standard screw specifications.
• The wall mount kit includes an installation
manual and necessary parts.
• The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
• The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
• For more information, refer to the manual
supplied with the wall mount.
21
22
MAKING CONNECTIONS
MAKING CONNECTIONS
Connect various external devices to the TV and switch input modes to select an external device. For
more information of external device’s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external devices.
NOTE
ENGLISH
• The external device connection may differ from the model.
• Connect external devices to the TV regardless of the order of the TV port.
• If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal
input cable to the TV through a DVD recorder or VCR. For more information of recording, refer
to the manual provided with the connected device.
• Refer to the external equipment’s manual for operating instructions.
• If you connect a gaming device to the TV, use the cable supplied with the gaming device.
• In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or
brightness. If noise is present, change the PC output to another resolution, change the refresh
rate to another rate or adjust the brightness and contrast on the PICTURE menu until the
picture is clear.
• In PC mode, some resolution settings may not work properly depending on the graphics card.
Antenna/Cable connection
Connect the TV to a wall antenna socket with an RF
cable (75Ω).
NOTE
• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal
amplifier properly to improve the image quality.
• If the image quality is poor with an antenna
connected, try to realign the antenna in the correct
direction.
• An antenna cable and converter are not supplied.
IN
ANTENNA CABLE
MAKING CONNECTIONS
HDMI connection
Transmits the digital video and audio signals
from an external device to the TV. Connect
the external device and the TV with the HDMI
cable as shown in the following illustration.
ARC (Audio Return Channel)
• An external audio device that supports
SIMPLINK and ARC must be connected
using HDMI input 1 (ARC) port.
• When connected with a high-speed HDMI
cable, the external audio device that
supports ARC outputs optical SPDIF without
additional optical audio cable and supports
the SIMPLINK function.
(*Not Provided)
HDMI
NOTE
• It is recommended to use the TV with the
HDMI connection for the best image quality.
• Use the latest High Speed HDMI ™ Cable
with CEC (Customer Electronics Control)
function.
• High Speed HDMI ™ Cables are tested to
carry an HD signal up to 1080p and higher.
• Supported DTV Audio: MPEG, Dolby Digital.
• Supported HDMI Audio format : Dolby
/88k/96k/176k/192k, DTS Not supported.)
ENGLISH
1(ARC)
2
DVD/ Blu-Ray / HD Cable
Box / HD STB / PC
IN
3
4 (PC)
Choose any HDMI input port to connect. It
does not matter which port you use.
23
24
MAKING CONNECTIONS
DVI to HDMI connection
RGB-PC connection
Transmits the digital video signal from an
external device to the TV. Connect the external
device and the TV with the DVI-HDMI cable as
shown in the following illustration. To transmit
an audio signal, connect an audio cable.
Transmits the video signal from PC to the
TV. To transmit an audio signal, connect
an audio cable.
4 (PC)
Choose any HDMI input port to connect. It
does not matter which port you use.
(PC)
(RGB/HDMI-PC)
AUDIO
2
IN
3
RGB
IN
(*Not Provided)
ENGLISH
IN
AUDIO
1(ARC)
(RGB/HDMI-PC)
RGB OUT (PC) AUDIO OUT
(*Not Provided)
PC
AUDIO OUT
DVI OUT
DVD/ Blu-Ray / HD Cable Box / PC
NOTE
• Depending on the graphics card, DOS mode
may not work if a HDMI to DVI Cable is in
use.
• It is recommended to connect the DVI-HDMI
to HDMI IN 4.
MAKING CONNECTIONS
25
Component connection
Composite connection
Transmits the analog video and audio signals
from an external device to the TV. Connect the
external device and the TV with a component
cable as shown in the following illustration.
Transmits analog video and audio signals
from an external device to the TV. Connect the
external device and the TV with th e composite
cable as shown in the following illustration.
IN
AV
VIDEO
PR
PB
AV
Y
VIDEO
RED
RED
(*Not Provided)
VIDEO
• If cables are installed incorrectly, it could
case the image to display in black and
whiteor with distorted color.
L ( MONO ) AUDIO R
RED
WHITE
VIDEO
NOTE
Y
YELLOW
YELLOW
GREEN
BLUE
AUDIO
PB
WHITE
BLUE
RED
R
VCR / DVD / Blu-Ray /
HD Cable Box
COMPONENT
PR
WHITE
BLUE
RED
RED
WHITE
L
(Use the composite
video cable provided.)
YELLOW YELLOW
RED
RED
GREEN
RED
WHITE
GREEN
WHITE
YELLOW
(*Not
Provided)
AUDIO
ENGLISH
(Use the component
video cable provided.)
GREEN
(Use the composite
video cable provided.)
YELLOW
VCR / DVD / Blu-Ray
/ HD Cable Box
IN
COMPONENT
AUDIO
26
MAKING CONNECTIONS
Audio connection
USB connection
You may use an optional external audio system
instead of the built-in speaker.
Connect a USB storage device such as a USB
• If you use an optional external audio device
instead of the built-in speaker, set the TV
speaker feature to off.
USB IN
3 USB Apps
NOTE
memory card reader to the TV and access the
Smart Share menu to use various multimedia
files.
Digital optical audio connection
ENGLISH
USB IN
1 HDD IN 2 USB Hub
Transmits a digital audio signal from the TV to
an external device. Connect the external device
and the TV with the optical audio cable as
shown in the following illustration.
OUT
OPTICAL
DIGITAL
AUDIO
(*Not Provided)
USB device
(*Not Provided)
NOTE
Digital Audio System
OPTICAL AUDIO IN
NOTE
• Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
• Audio with ACP (Audio Copy Protection)
function may block digital audio output.
• To use a USB Hub device, make sure
that it is connected to the USB IN 2
USB Hub port.
• To store apps on a USB storage device,
make sure that it is connected to the
USB IN 3 USB Apps port.
• Connect the external power source if
your USB is needed.
REMOTE CONTROL
27
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the and ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
• Do not mix old and new batteries, as this may damage the remote control.
Make sure to point the remote control toward the remote control sensor on the TV.
RATIO INPUT
TV/
RAD
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
FAV
P
MUTE
SETTINGS
HOME
MY APPS
GUIDE EXIT
SUBTITLE
TEXT
T.OPT
Q.MENU
REC
ENERGY
SAVING
INFO
+
Adjusts the volume level.
-
Sees user-guide.
Resizes an image.
Changes the input source; Turns the TV on.
Selects Radio, TV and DTV programme.
Enters numbers.
Accesses the saved programme list.
Returns to the previously viewed programme.
FAV
Accesses your favorite channel list.
3D
Used for viewing 3D video.
MUTE
Mutes all sounds.
PAGE
Moves to the previous or next screen.
P
Scrolls through the saved programmes.
SETTINGS
Accesses the setting menus.
HOME
Accesses the main menus.
MY APPS
Accesses the MY APPS menus.
Navigation buttons
(up/down/left/right)
Scrolls through menus or options.
OK
Selects menus or options and confirms your input.
(BACK)
OK
LIVE TV
P
A
G
E
Turns the TV on or off.
Returns to the previous level.
GUIDE
Shows programme guide.
EXIT
Clears all on-screen displays and return to TV viewing.
Color buttons
These access special functions in some menus.
TEXT/T.OPT
These buttons are used for teletext.
Q.MENU
Accesses the quick menus.
SUBTITLE
Recalls your preferred subtitle in digital mode.
LIVE TV
Return to LIVE TV.
Control buttons
(
)
Controls the Premium contents, DVR or Smart Share menus or
the SIMPLINK compatible devices (USB or SIMPLINK or DVR).
REC
Uses to adjust DVR menu.
ENERGY
SAVING
Adjusts the brightness of the screen to reduce
energyconsumption.
INFO
Views the information of the current programme and screen.
SIMPLINK
Accesses the AV devices connected to the TV;
Opens the SIMPLINK menu.
ENGLISH
1
(POWER)
? (User Guide)
RATIO
INPUT
TV/RAD
Number button
LIST
Q.VIEW
28
REMOTE CONTROL
MAGIC REMOTE CONTROL FUNCTIONS
When the message “Magic remote control battery is low. Change the
battery.” is displayed, replace the battery. To replace batteries, open the
battery cover, replace batteries (1.5 V AA) matching and ends to the label
inside the compartment, and close the battery cover. Be sure to point the
remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
Pointer (RF transmitter)
Blinks the light when operating.
(POWER)
Turns the TV on or off.
HOME
Accesses the Home menu.
BACK
Returns to the previous level.
BACK
HOME
ENGLISH
Navigation buttons (up/down/
left/right)
Scrolls through menus or
options.
Wheel(OK)
Selects menus or options and
confirms your input.Scrolls
through the saved channels.
If you press the navigation
button while moving the
pointer on the screen, the
pointer disappears, and the
Magic remote control works
as a regular remote control.
To display the pointer again,
shake the Magic remote
control from side to side.
P
MY APPS
+
Adjusts the volume level.
P
Scrolls through the saved
programmes or channels.
(MUTE)
Mutes all sounds.
MY APPS
Shows the list of Apps.
3D
Used for viewing 3D video.
1
TV
11-1 Brief Info Title Test...
11:40AM
i Info.
2
1 If you press
(Wheel) on the Magic remote control,
the following screen appears.Shows information about
the current program and screen.
2 If you press
(Wheel) on the Magic remote control,
the following screen appears.Set the channel you
want.You can press the
P
button on the remote
control to set the channel.
REMOTE CONTROL
Registering Magic Remote
Control
It is necessary to ‘pair’ (register) the magic
remote control to your TV before it will work.
How to register the Magic
remote control
1 To register automatically,
turn the TV on and press the
(Wheel) button. When
registration is completed,
the completion message
appears on the screen.
2 If registration fails, turn the
TV off and back on, then
press the Wheel(OK) button
to complete registration.
BACK
HOME
1 Press and hold the
BACK and
HOME
buttons together for 5
seconds to reset, then
register it by following“How
to register the Magic remote
control” above.
2 To re-register the Magic
remote control, press and
hold the
(BACK) button
for 5 seconds toward the
TV. When registration is
completed, the completion
message appears on the
screen.
How to use Magic Remote
Control
1 If the pointer disappears, move
the remote control slightly to left
or right. Then, it will automatically
appear on the screen.
»If the pointer has not been
used for a certain period
of time, it will disappear.
2 You can move the pointer by
aiming the Pointer Receiver of
the remote control at your TV
then move it left, right, up or
down.
»If the pointer does not work
properly, leave the remote
control for 10 seconds then use
it again.
Precautions to Take when
Using the Magic Remote
Control
• Use the remote control within the maximum
communication distance (10 m). Using the
remote control beyond this distance, or
with an object obstructing it, may cause a
communication failure.
• A communication failure may occur due to
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as these use the
same bandwidth (2.4 GHz) as the Magic
Remote Control.
• The Magic Remote Control may be damaged
or may malfunction if it is dropped or
receives a heavy impact.
• Take care not to bump into nearby furniture
or other people when using the Magic
Remote Control.
• Manufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
• It is recommended that an Access Point (AP)
be located more than 1 m away from the
TV. If the AP is installed closer than 1 m, the
magic remote control may not perform as
expected due to frequency interference.
ENGLISH
How to re-register the Magic
remote control
29
30
USING THE USER GUIDE
USING THE USER GUIDE
User Guide allows you to more easily access the detailed TV information.
Remote control
You can also access the User Guide by pressing
(User Guide) in the remote control.
Magic Remote control
1 Move the remote control slightly to left or right,press
2 Select SETTINGS and press
(Wheel).
3 Move the Magic remote control to SUPPORT .
4 Select User Guide and press
(Wheel).
HOME button.
ENGLISH
MAINTENANCE / TROUBLESHOOTING
31
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
Screen, frame, cabinet and stand
• To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
• To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
• Avoid touching the screen at all times, as this may result in damage to the screen.
Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may
• result in scratches and image distortions.
• Do not use any chemicals as this may damage the product.
• Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric
shock, or malfunction.
ENGLISH
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Resolution
Cannot control the TV
with the remote control.
• Check the remote control sensor on the product and try again.
• Check if there is any obstacle between the product and the remote
control.
• Check if the batteries are still working and properly installed
(
to ,
to
).
No image display and
no sound is produced.
• Check if the product is turned on.
• Check if the power cord is connected to a wall outlet.
• Check if there is a problem in the wall outlet by connecting other
products.
The TV turns off
suddenly.
• Check the power control settings. The power supply may be
interrupted.
• Check if the Auto sleep feature is activated in the Time settings.
• If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
32
SPECIFICATIONS
Specifications
MODELS
ITEM
Product Dimensions With stand
(WxHxD)
Without stand
Product Weight
With stand
Without stand
Power requirement
MODELS
ITEM
Product Dimensions With stand
(WxHxD)
Without stand
Product Weight
With stand
Without stand
Power requirement
ENGLISH
MODELS
ITEM
Environment Operating Temperature
condition
Operating Humidity
32LM6690
42LM6690
719.0×498.0×230.0 mm
719.0×437.0×55.0 mm
9.5kg
7.9kg
AC 100-240V~50/60Hz
953.0×660.0×269.0 mm
953.0×566.0×55.0 mm
14.8kg
12.6kg
AC 100-240V~50/60Hz
47LM6700
55LM6700
1063.0×696.0×263.0 mm
1232.0×795.0×331.0 mm
1063.0×628.0×55.0 mm
17.5kg
15.3kg
AC 100-240V~50/60Hz
1232.0×723.0×55.0 mm
25.0kg
21.3kg
AC 100-240V~50/60Hz
32/42LM6690
47/55LM6700
0oC to 40oC
Less than 80%
Storage Temperature
-20oC to 60oC
Storage Humidity
Less than 85%
Record the model number and serial number of the TV.
Refer to the label on the back cover and quote this
information to your dealer when requiring any service.
Model:
Serial No.:
Download PDF

advertising